MAINTENANCE EQUIPMENT CATALOG DC000048EN/21

Transcription

1 MAINTENANCE EQUIPMENT CATALOG DC000048EN/21

2 TOOL CASE FOR STATION MOUNTING LOCATIONS IN THE STAION TOOL CASE FOR MAINTENANCE EQUIPMENT IN THE STATION /02/2017 2

3 GRIP NON SLIDING CONTROL DEVICE ANTICLOCKWISE OPERATION CLOCKWISE OPERATION /02/2017 3

4 ROPE LIFTING DEVICE FOR ROPE DEFLECTION HYDRAULIC CYLINDER WITH HAND PUMP AND SUPPORTING BLOCKS FOR ROPE DEFLECTION AND LINE ROLLERBATTERIES /02/2017 4

5 ASSEMBLY DEVICE V-BELT ASSEMBLY DEVICE V-BELT /02/2017 5

6 AUXILIARY HUB FOR SPACER AUXILIARY HUB FOR STANDARD SPACER AUXILIARY HUB FOR SPACER AUXILIARY HUB FOR SPACER AUXILIARY HUB FOR SPACER WITH BELT AND PULLEYS 23/02/2017 6

7 INTERMEDIATE FLANGE FOR SYNCHRONISATION TYRE INTERMEDIATE FLANGE FOR SYNCHRONISATION TYRE /02/2017 7

8 CALIBRATION FOR LOAD CELL COUPLING RAIL CALIBRATION FOR LOAD CELL COUPLING RAIL /02/2017 8

9 SETUP TEMPLATES FOR STATION TEMPLATE LPA LPA FOR STATION /02/2017 9

10 TEMPLATES FOR SHEAVE LINER TEMPLATE LPA FOR SHEAVE LINER /02/

11 CALIBER COUPLING SECTION ROPE 36 D 68.5 CALIBRE ROPE 38 D 68.5 CALIBRE ROPE 40 D 73 CALIBRE ROPE 40 D 78 CALIBRE ROPE 42 D 74 CALIBRE ROPE 42 D 79 CALIBRE ROPE 43 D 79.5 CALIBRE ROPE 44 D 75 CALIBRE ROPE 44 D 80 CALIBRE ROPE 46 D 77 CALIBRE ROPE 46 D 82 CALIBRE ROPE 47 D 83.5 CALIBRE ROPE 48 D 78 CALIBRE ROPE 48 D 83 CALIBRE ROPE 50 D 79 CALIBRE ROPE 50 D 84 CALIBRE ROPE 52 D 81 CALIBRE ROPE 52 D 86 CALIBRE ROPE 54 D 87 CALIBRE ROPE 56 D 88 CALIBRE ROPE 58 D 89 CALIBRE ROPE 59 D 89.5 CALIBRE ROPE 60 D 90 CALIBRE /02/

12 TEMPLATE FOR CONTROL RAILS TEMPLATE LPA FOR CONTROL RAILS /02/

13 ADJUSTMENT TOOL FOR THE CONDUCTOR RAIL TEMPLATE LPA FOR CONDUCTOR RAIL STATIONS /02/

14 ROPE GROUND CONNECTION HOOK FOR THE SMALL ROOF GROUND CONNECTIONS HOOKS WITH GROUND RODS /02/

15 ROPE GROUND CONNECTION HOOK FOR THE HIGH ROOF GROUND CONNECTIONS HOOKS WITH GROUND RODS /02/

16 TEST BENCH FOR GRIP TEST BENCH FOR GRIP IN THE PARKING TRACK OR FOR STORAGE RAIL /02/

17 MOUNTING BLOCK FOR TEST BENCH FOR GRIP MOUNTING BLOCK FOR TEST BENCH, FOR INSTALLATIONS WITHOUT PARKING TRACK OR INTEGRATED MAINTENANCE /02/

18 TO LIFT OFF DEVICE FOR VEHICLE TO LIFT OFF DEVICE FOR VEHICLE IN THE PARKING TRACK /02/

19 TO LIFT OFF DEVICE FOR VEHICLE TO LIFT OFF DEVICE FOR VEHICLE ON THE STORAGE RAIL /02/

20 TRANSPORT DEVICE FOR VEHICLE TRANSPORT DEVICE IN THE MANUAL PARKING TRACK AND INTEGRATED MAINTENANCE STAND FOR GRIP S/N/M TRANSPORT DEVICE IN THE MANUAL PARKING TRACK AND INTEGRATED MAINTENANCE STAND FOR GRIP L/XL /02/

21 GRIP OPENING DEVICE GRIP OPENING DEVICE /02/

22 TOOL BOX FOR GRIP MAINTENANCE TOOL BOX ASSY FOR GRIP M/L/XL TOOL BOX ASSY FOR GRIP S/N /02/

23 PULL OFF DEVICE FOR GUIDE ROLLER GRIP PULL OFF DEVICE FOR GUIDE ROLLER GRIP LPA S/N/M PULL OFF DEVICE FOR GUIDE ROLLER GRIP LPA L/XL /02/

24 TRANSPORT DEVICE FOR VEHICLE TRANSPORT DEVICE IN THE AUTOMATIC PARKING TRACK FOR GRIP S/N/M TRANSPORT DEVICE IN THE AUTOMATIC PARKING TRACK FOR GRIP L/XL /02/

25 FORCE MEASURING PIN FOR GRIP FORCE FORCE MEASURING PIN WITH INDICATOR FOR GRIP S/N ROPE 36D FORCE MEASURING PIN WITH INDICATOR FOR GRIP S/N ROPE 38D FORCE MEASURING PIN WITH INDICATOR FOR GRIP S/N ROPE 40D FORCE MEASURING PIN WITH INDICATOR FOR GRIP S/N ROPE 42D FORCE MEASURING PIN WITH INDICATOR FOR GRIP S/N ROPE 44D FORCE MEASURING PIN WITH INDICATOR FOR GRIP S/N ROPE 46D FORCE MEASURING PIN WITH INDICATOR FOR GRIP S/N ROPE 48D FORCE MEASURING PIN WITH INDICATOR FOR GRIP S/N ROPE 50D FORCE MEASURING PIN WITH INDICATOR FOR GRIP M/L/XL ROPE 40D FORCE MEASURING PIN WITH INDICATOR FOR GRIP M/L/XL ROPE 42D FORCE MEASURING PIN WITH INDICATOR FOR GRIP M/L/XL ROPE 44D FORCE MEASURING PIN WITH INDICATOR FOR GRIP M/L/XL ROPE 46D FORCE MEASURING PIN WITH INDICATOR FOR GRIP M/L/XL ROPE 48D FORCE MEASURING PIN WITH INDICATOR FOR GRIP M/L/XL ROPE 50D FORCE MEASURING PIN WITH INDICATOR FOR GRIP M/L/XL ROPE 52D FORCE MEASURING PIN WITH INDICATOR FOR GRIP M/L/XL ROPE 54D FORCE MEASURING PIN WITH INDICATOR FOR GRIP M/L/XL ROPE 56D FORCE MEASURING PIN WITH INDICATOR FOR GRIP M/L/XL ROPE 58D FORCE MEASURING PIN WITH INDICATOR FOR GRIP M/L/XL ROPE 60D /02/

26 MOUNTING CONE LP8 MOUNTING CONE FOR PIN CONNECTION FRAME LP /02/

27 MOUNTING CONE LP6 MOUNTING CONE FOR PIN CONNECTION FRAME LP /02/

28 ADJUSTMENT TOOL FOR THE CURRENT COLLECTORS TEMPLATE LPA FOR GRIP LPA N/M /02/

29 ADJUSTMENT TOOL FOR THE CURRENT COLLECTORS TEMPLATE LPA FOR GRIP LPA L/XL /02/

30 TEMPLATE FOR OPERATING ROLLER PROFILE SHEET TEMPLATE LPA FOR OPERATING ROLLER WITH PROFILE SHEET FOR GRIP S/N/M WITHOUT PROFILE SHEET FOR GRIP L/XL 23/02/

31 TEMPLATE FOR OPERATING GROUP PROFILE SHEET TEMPLATE LPA FOR OPERATING GROUP WITH PROFILE SHEET FOR GRIP S/N/M WITHOUT PROFILE SHEET FOR GRIP L/XL 23/02/

32 ADJUSTMENT TOOLS FOR CHAIRS WITH SAFETY BAR FORCE MEASURING DEVICE LPA FOR LOCKING RAIL /02/

33 SPECIAL KEYS FOR TENSION SPRING SPECIAL KEYS FOR TENSION SPRING SAFETY BAR AND FOR TENSION SPRING BUBBLE AND /02/

34 WEIGHT FOR SETTING CHAIR WEIGHT FOR SETTING CLOSING FORCE OF THE BUBBLE CHAIR /02/

35 ASSEMBLY DEVICE FOR THERMAL INSULATION ASSEMBLY DEVICE LPA / CF FOR THERMAL INSULATION /02/

36 SWITCH ROAD FOR OPERATING ELEMENT SWITCH ROAD FOR OPERATING ELEMENT OPENING AND CLOSING CABIN DOORS /02/

37 DISMANTLING TOOLS FOR PINS OF THE INTERMEDIATE JOINT DISMANLING PINS ASSY DISMANTLING TOOL FOR THE MAIN AXLE DISMANTLING TOOL FOR THE DOWNSIDE PINS PULL OFF DEVICE FOR THE DOWNSIDE PINS /02/

38 FORCE TESTING DEVICE FOR THE CABIN DOORS DEVICE WITH HOLDER AND SUPPORTING SHOES WITHOUT LOAD CELL /02/

39 MAINTENANCE CRANE FOR HIGH STRUCTURE MAINTENANCE CRANE FOR DRIVE STATION 2X (max.2x 2500kg) 23/02/

40 MAINTENANCE CRANE IN THE PARKING TRACK MAINTENANCE CRANE IN THE PARKING TRACK (max.1000kg) /02/

41 ROTATING CRANE FOR ROPE DEFLECTION ROTATING MAINTENANCE CRANE FOR CABLE DEFLECITON (max.100kg) USE: 1.CABLE DEVIATION MAINTENANCE IN STATION 2.ASSEMBLY DEVICE FOR ROLLER LINERS 23/02/

42 LOWERING EQUIPMENT FOR VEHICLES MANUAL LIFTING DEVICE FOR VEHICLE /02/

43 ROPE LIFTING DEVICE FOR TOWER ROLLERBATTERY RETURN ROLLERS WITH SHACKLE AND ROUND SLINGS /02/

44 HYDRAULIC ROPE LIFTING DEVICE SUPPORT ROLLER BATTERY HYDRAULIC CYLINDER WITH ROPE SUPPORT /02/

45 OPENING DEVICE FORE COMBINED ROLLERBATTERY MANUAL OPENING DEVICE /02/

46 TEMPLATE FOR WEARING CONTROL OF ROLLER RUBBER RING TEMPLETE SET LPA ROLLER 420D LPA ROLLER 460D LPA ROLLER 550D LPA ROLLER 550D/554D 23/02/

47 ADJUSTMENT TEMPLATE FOR THE CPS SENSORS ADJUSTMENT TEMPLATE FOR THE CPS SENSORS /02/

48 DISPLACING DEVICE FOR TOWER IN LINE (EXTERNAL FRAME) DISPLACING DEVICE TOWER ASSY /02/

49 DISPLACING DEVICE FOR TOWER IN LINE (FRAME INTEGRATED) DISPLACING DEVICE TOWER ASSY /02/

50 EXTENDIBLE LADDER EXTENDIBLE LADDER WITH SAFETY HOOKS 3-5M /02/

51 FALL PROTECTION DEVICE FALLBLOC FALL PROTECTION DEVICE FOR ROPE 8D /02/

52 TOOL BOX WITH COMMERCIAL TOOLS TOOL BOX ASSY /02/

53 SET WITH SPECIAL TOOLS SPECIAL C-HOOK SPANNER FOR SAFETY BRAKE SPECIAL FACE PIN WRENCH FOR VERTICAL DEFLECTION ROLLER SET ASSY OF SPECIAL TOOLS /02/

54 TOOLS FOR PNEUMATIC SYNCHRONISATION COUPLING SPECIAL FACE PIN WRENCH FOR THE LIMIT STOP FOR DISC SPRINGS BELT WRENCH FOR THE LIMIT STOP FOR DISC SPRINGS SET ASSY OF TOOLS SPECIAL FACE PIN WRENCH FOR THE ELEVATING CYLINDER 23/02/

55 TOOLS FOR MANUAL SYNCHRONISATION COUPLING SET ASSY ADAPTOR FROM ½ FEMALE TO ¾ MALE SOCKET SW46 ¾ 23/02/

56 HAND PUMP FOR MAINTENANCE EQUIPMENT HAND PUMP 350 bar WITH MANOMETER AND HOLDER 2 HYDRAULIC HOSES 3M WITH QUICK COUPLER /02/

57 TOOLS FOR GREASING SET ASSY GREASE GUN 500 gr / 400 bar PRESSURE HOSE 900 bar COUPLING FOR BUTTON HEAD LUBRIFICATION NIPPLE COUPLING FOR CONICAL LUBRIFICATION NIPPLE /02/

58 HAND PUMP FOR SHEAVE LUBRIFICATION HAND PUMP ASSY HAND PUMP FOR LUBRIFICATION OIL HOSE 0.5 M WITH CONNECTOR FOR DRAIN VALVE ADDITIONAL LEVER FOR HAND PUMP 23/02/

59 MEASUREMENT EQUIPMENT EQUIPMENT ASSY HAND PUMP 400 bar WITH MANOMETER MEASUREMENT HOSE WITH CONNECTIONS 23/02/

60 POWER SUPPLY WITH CONNECTOR ( BAYONET 6 POLES) POWER SUPPLY FOR LOAD CELL USE : 1.GRIP SLIDING FORCE CONTROL DEVICE 2. TEST BENCH FOR GRIP 3. FORCE TESTING DEVICE FOR THE CABIN DOORS 23/02/

61 AIR COMPRESSOR COMPRESSOR ASSY AIR COMPRESSOR 8 bar AIR PISTOL WITH MANOMETER SPIRAL TUBE 23/02/

62 ASSEMBLY DEVICE FOR ROLLER RUBBER-RINGS AND BEARING CHANGEMENT ELECTROHYDRAULIC ASSEMBLY DEVICE FOR 420/550 ROLLERS MANUAL ASSEMBLY DEVICE FOR 420/550 ROLLERS ELECTROHYDRAULIC ASSEMBLY DEVICE FOR 420/460/550 ROLLERS MANUAL ASSEMBLY DEVICE FOR 420/460/550 ROLLERS /02/

63 ADDITIONAL HYDRAULIC OIL HYDRAULIC OIL ATF DEXRON III H /02/

64 ROPE LIFTING DEVICE SUPPORT ROLLER BATTERY OPTIONAL ROPE LIFTING DEVICE SUPPORT ROLLER BATTERY MAX 2x6.3T HOISTING BEAM FOR THE TOWER /02/

65 ELECTRICAL CHAIN HOIST FOR CRANE OPTIONAL ELECTRICAL CHAIN HOIST 1000kg /02/

66 TO LIFT OFF DEVICE FOR VEHICLE OPTIONAL TO LIFT OFF DEVICE FOR VEHICLE HYDRAULIC /02/

67 HYDRAULIC OPENING DEVICE FOR GRIP OPTIONAL HYDRAULIC OPENING DEVICE FOR GRIPS PFE /02/

68 SPECIAL TOOL FOR V-BELT TENSION OPTIONAL SPECIAL TOOL FOR V-BELT TENSION /02/

69 HYDRAULIC UNIT FOR THE MAINTENANCE EQUIPMENT OPTIONAL HYDRAULIC UNIT ASSY HYDRAULIC UNIT WITH 100Ah BATTERY AND BATTERY RECHARGER 2 HYDRAULIC HOSES 6M WITH QUICK COUPLER 23/02/

70 HYDRAULIC UNIT SUPPORT FOR MAINTENANCE VEHICLE OPTIONAL HYDRAULIC UNIT SUPPORT FOR MAINTENANCE VEHICLE /02/

71 TENSIONER ROPECLAMPS OPTIONAL ROPECLAMP FOR ROPE 33 40D ROPECLAMP FOR ROPE 41 48D ROPECLAMP FOR ROPE 49 56D ROPECLAMP FOR ROPE 57 60D /02/

72 BRUSH FOR GRIP CLEANING OPTIONAL BRUSCH FOR CLOCKWISE OPERATION BRUSCH FOR ANTICLOCKWISE OPERATION /02/

73 BRUSH FOR ROPE CLEANING OPTIONAL BRUSCH POSITIONED AFTER THE HORIZONTAL CABLE DEVIATION /02/

74 DISMANTLING DEVICE SYNCHRONISATION TIRES OPTIONAL DISMANTLING DEVICE SYNCHRONISATION TIRES /02/

75 DISPLACING DEVICE FOR THE TENSIONING STATION OPTIONAL HYDRAULIC CYLINDER WITH PINS /02/

76 HYDRAULIC UNIT FOR THE DISPLACING DEVICE OPTIONAL HYDRAULIC UNIT WITH HOSES AND QUICK COUPLER /02/

77 CRANE FOR MAINTENANCE VEHICLE OPTIONAL CRAN FOR MAINTENANCE VEHICLE /02/

78 COMPRESSED AIR INSTALLATION OPTIONAL COMPRESSED AIR INSTALLATION /02/

79 MACHINING TOOL FOR HANGER SLIDING BEARINGS TYPE HOSTAFORM OPTIONAL MACHINING TOOL FOR HANGER FOR GRIPS LPA S/N/M MACHINING TOOL FOR HANGER FOR GRIPS LPA L/XL /02/

80 OIL SERVICE UNITE OPTIONAL OIL SERVICE UNIT ASSY WITH FILTERS FILTER ELEMENT SPARE PART WATER FILTER ELEMENT SPARE PART /02/

81 CHARGING KIT FOR NITROGEN ACCUMULATORS OPTIONAL KIT ASSY WITH CONNECTORS BUYING THE FITTINGS FOR NITROGEN BOTTLES BY COUNTRY 23/02/

82