BY DESIGN. DIFFERENT. BY INTENT.

Size: px

Start display at page:

Download "BY DESIGN. DIFFERENT. BY INTENT."

Antonia Davidson
6 years ago
Views:

Tech Bulletin Page 51-10 FLO 3pc High Performance Fire Safe Ball Valve Tri-Pro Series Models HPF50 - (316SS) HPF40 - (WB) Full Port: 1/4-3 Pressure Rating 2250 WOG / 250 WSP Models HPS50 - (316SS)

5211 ctuator Mounting Secondary Media ontainment nti-static Grounding evice Weld in-place, / BW Protected Seat esign Two Fully ontained Body Seals ap Screw Body ssembly 17-4Ph Stem Standard V-Port

1 Tech Bulletin Page FLO 3pc High Performance Fire Safe Ball Valve Tri-Pro Series Models HPF50 - (316SS) HPF40 - (WB) Full Port: 1/4-3 Pressure Rating 2250 WOG / 250 WSP Models HPS50 - (316SS) HPS40 - (WB) Standard Port: Pressure 3000 psi Pressure 2250 psi 1/4-4 1/ /2-4 1 HPF52 () 3 HPF51 (NPT) esign Features / Options Tri-Pro s dvantage Fire Safe ertified to PI th Edition I-SO 5211 ctuator Mounting Secondary Media ontainment nti-static Grounding evice Weld in-place, / BW Protected Seat esign Two Fully ontained Body Seals ap Screw Body ssembly 17-4Ph Stem Standard V-Port ontrol (vailable) Metal Seats (vailable) bility to handle pressure and temperature shock bility to withstand higher pressure drop bility to handle slurries and resist abrasion and wear Bubble tight sealing to 550º F Bubble tight sealing to 2250 psi/3000psi bility to handle thermal fluid and super heated steam (with Special Seats) REFINE. BY ESIGN. IFFERENT. BY INTENT. Tri-Pro! One Valve for Most ll pplications

I-SO Mount ctuator Mounting, 4 Bolt esign Eliminates Torsional Stress, ctuator can be Removed while Valve is under Full Pressure nti-static grounding devices at two locations enable electrical

2 I-SO Mount ctuator Mounting, 4 Bolt esign Eliminates Torsional Stress, ctuator can be Removed while Valve is under Full Pressure nti-static grounding devices at two locations enable electrical continuity Pocketed and recessed seats with secondary metal backup seal. Fully Encapsulated Graphite Gaskets Isolates media from atmosphere esign Specifications and Standard of ompliance Parallel flat stem head for positive ball position indication PH as standard stem material. Locking evice OSH Lock-out Tab Washer prevents nut from loosening Lived Loaded Belleville Washer Maintain constant packing load V-Ring Packing Rings Form a Rigid, High ycle Stem Seal. Thrust Bearing Provides an Excellent Long Life Bearing Support Fully Encapsulated TFM Gaskets adds Second Barrier Body Precision Investment asting, Shell/Wall NSI B16.34 Fully encapsulated cap screws protected from outside environment Tech Bulletin Page 51B-10 Technical Specifications ll Tri Pro valves are designed to meet SME/NSI B16.34 class 600&900 specifications and can be certified as such upon request at order submittal. The valve design is in compliance with BS 5351, BS 5159 Threaded End onnections meet SME/NSI B1.20.NPT, BSPTISO R/7,BS21 Socket Weld End onnections meet SME/NSI B Butt Weld End onnections meet MSS SP72. NSI B16.25, B16.5 Figure 2 detail recommended sch. 40 up to 1000 PSI, sch. 80 up to 2200 PSI. Flanged End onnections meet SME/NSI lass 600, SME/NSI B16.10 and B16.5 MSS SP25 compliance for standard marking system ll Tri-Pro Valves meet NE MR0175 for sour gas service. ll valves are Fire Safe and certified to PI 607 4th Edition. Fire Safe esigned Valves must have Graphite Stem packing. Federal Spec WW-V-35 Type II valve body and end connections are high quality investment cast and solution annealed/ normalized. ll valves are hydrostatically shell tested to 1.5 x rating. ll valves 100% air tested under water at psi. omplies with PI-598, BS6755Pt.2. Vacuum Service Suitable to 20 Micron Specially cleaned and lubricated valves can handle services of 10-3 mm. of Hg (1 micron). Quality ssurance ll valves are manufactured to ISO 9001 quality standards Valve Size Bolt Size Bolt Torque in. lb ¼ - ¾ M ¼ M ½ M ½ M / / /2 3-4 Seat ode Seat Material F Super-Tek (TFM) Y Super-Tek III (carbon graphite filled TFM) S 50% Stainless Steel filled PTFE etail of Protected seat and encapsulated body seal design. Isolates and protects both seats and seals from flow path. Helps to prevent cold flow. Seats & seals assembled into valve end caps U P M UHMWPE PEEK Metal avity Filler

TITE BILL OF MTERIL ITEM NME STINLESS STEEL RBON STEEL QTY 1 BOY 351-F8M 216 - WB 1 2 P 351-F8M* 216 - WB 2 3 BLL 351 F8M 351 F8M 1 4 SET SUPER-TEK # SUPER-TEK # 2 5 GSKET TFM # TFM # 1 6 GSKET

PKING FOLLOWER SS304 SS304 1 13 BELLEVILLE WSHER SS301 SS301 2 14 LOK WSHER SS304 SS304 1 15 STEM NUT SS304 SS304 2 16 HNLE SS304 SS304 1 17 STOPPER SS304 SS304 1 18 PLSTI OVER PLSTI PLSTI 1 19

3 TITE BILL OF MTERIL ITEM NME STINLESS STEEL RBON STEEL QTY 1 BOY 351-F8M WB 1 2 P 351-F8M* WB 2 3 BLL 351 F8M 351 F8M 1 4 SET SUPER-TEK # SUPER-TEK # 2 5 GSKET TFM # TFM # 1 6 GSKET GRPHITE # GRPHITE # 1 7 BOLT SS316 SS STEM 17-4PH 17-4PH 1 9 THRUST BERING 50% SS316 Filled PTFE 50% SS316 Filled PTFE 1 10 THRUST WSHER TFM # TFM # 1 11 STEM PKING GRPHITE # GRPHITE # 3 12 PKING FOLLOWER SS304 SS BELLEVILLE WSHER SS301 SS LOK WSHER SS304 SS STEM NUT SS304 SS HNLE SS304 SS STOPPER SS304 SS PLSTI OVER PLSTI PLSTI 1 19 LOKING EVIE SS304 SS NTI-STTI SPRING SS301 SS NTI-STTI BLL SS316 SS316 2 # Parts included in the repair kits * Weld end, end caps are 316L Ball esign dded Safety Feature 1/4-2 TRI - PRO EXPLOE VIEW Tech Bulletin Page ll balls are provided with 1/8 hole drilled into the stem slot of each ball to prevent excessive pressure build up in the cavity from trapped liquid when the valve is in the open position. HI-TEK Stem ssembly Flo-Tite s stem design is secured by a saddle type lock washer which prevents stem nut from unthreading in high cycle automation applications. ll stems are blow-out proof design. High performance 3 pc. Vee style stem packing standard. Self-adjusting Belleville washers automatically adjust for mechanical wear thermal, contraction and expansion. 2 1/2-4 TRI - PRO EXPLOE VIEW BILL OF MTERIL ITEM NME STINLESS STEEL RBON STEEL QTY 1 BOY 351-F8M WB 1 2 P 351-F8M WB 2 3 BLL 351-F8M SS 1 4 SET TFM or 50/50 TFM or 50/ STEM 17-4PH 17-4PH 1 6 GSKET SUPER-TEK TFM SUPER-TEK TFM 2 7 GSKET GRPHITE GRPHITE 2 8 BOY BOLT SS316 SS NTI-STTI BLL SS316 SS NTI-STTI SPRING SS316 SS THRUST BERING 50% SS316 Filled PTFE 50% SS316 Filled PTFE 1 12 THRUST WSHER SUPER-TEK TFM SUPER-TEK TFM 1 13 BERING SLEEVE SUPER-TEK TFM SUPER-TEK TFM 1 14 STEM PKING GRPHITE GRPHITE 3 15 PKING FOLLOWER SS304 SS GLN BOLT SS304 SS GLN PLTE SS304 SS PKING PROTETOR 50% SS316 Filled PTFE 50% SS316 Filled PTFE 1 19 SET SREW SS304 SS STOP HOUSING 351 F8 216 WB 1 21 HOUSING BOLT SS304 SS TRVEL STOPPER SS304 Zinc Plated.S SNP RING Nickel Plated.S. Nickel Plated.S HNLE uctile Iron uctile Iron 1 Parts included in the repair kits Both Full Port and Standard Port Valve Parts are Interchangeable

4 imensions - Full Bore Technical Submittal Tech Bulletin Page Tri-Pro Series HPF SIZE NPT BW & B 1 E1 sch 80 E2 F1 F2 G v Weight Torque Lbs In - Lb 1 / / / / / / / PPLIBLE STNRS Body Wall Thickness SME B16.34 NPT and Ends SME B16.11 Butt Weld End SME B16.25 Basic imensions SME B16.34 Testing Standard SME B16.34, P1598 NE MR MOUNTING IMENSIONS SIZE d K L M P W Mt Pad 1 / #10-24UN F04 3 / #10-24UN F04 1 / #10-24UN F04 3 / #10-24UN F /4-20UN F / /4-20UN F05 Pressure Temperature Rating 1/4-1/2 3/4-4 50/50 Seats are recommended for 3000 PSI services 1 1 / /16-18UN F /16-18UN F / /2-13UN F /2-13UN F10 ** 50/50 Seat is recommended for 3000 WOG Service ue to continous development & improvement of our product range, we reserve the right to alter the dimensions & technical data included in the brochure

5 TITE imensions - Reduced Bore Technical Submittal Tech Bulletin Page 51E-10 Tri-Pro Series HPS SIZE SIZE NPT BW & d B K L 1 M P E1 sch 80 MOUNTING IMENSIONS E2 W F1 F2 Mt Pad G v Weight Torque Lbs In - Lb 1 / / / / / / / / 4, 3 / #10-24UN F04 1 / #10-24UN F04 3 / #10-24UN F04 PPLIBLE STNRS Body Wall Thickness NPT and Ends Butt Weld End Basic imensions Testing Standard NE SME B16.34 SME B16.11 SME B16.25 SME B SME B16.34, P1598 MR Pressure Temperature Rating 1/ /4-1 50/50 Seats are recommended for 3000 PSI services #10-24UN F / /4-20UN F / /4-20UN F /16-18UN F / /16-18UN F /2-13UN F /2-13UN F10 Body rating in this chart is for F8M material. Max. WB body rating is 2250 psi for class 900 and 1480 psi for class 600. ue to continous development & improvement of our product range, we reserve the right to alter the dimensions & technical data included in the brochure

6 imensions - Flanged lass 600 and 900 Technical Submittal FULL BORE Tech Bulletin Page 51F-10 Pressure Tempature Rating Body rating in this chart is for F8M material. Max. WB body rating is 2220 psi for class 900 and 1480 psi for class 600. SIZE nsi nsi B E1 600# BOLT IRLE E2 900# BOLT IRLE F1 600# FLNGE O F2 900# FLNGE O 1 / / v Torque In-Lb PPLIBLE STNRS Wall Thickness SME B16.34 Face to Face SME B / Flange imension SME B / / Valves will be supplied with full cast or weld on flanges Tri-Pro - Product Identification ode for Full Valve Model Numbers BOY SEON EN MOEL MTERIL ONNETION SET STEM SEL BOY SEL OPERTOR SIZE SS - Full Port: NPT HPF51 HPF52 BW HPF53 FLG HPF56 S - Full Port: NPT HPF41 HPF42 BW HPF43 FLG HPF46 SS - Red. Port: NPT HPS51 HPS52 BW HPS53 S - Red. Port: NPT HPS41 HPS42 BW HPS43 Ordering Examples by Part Numbers MOEL NPT end Red. Port.S. Body 316SS SS Threaded 1 TFM F TFM F TFM F LEVER L WB S Socket Weld 2 TFM Y TFM Y RTFM X LOKING 3/8 10 LLOY 20 2 Butt Weld 3 PTFE T OVL 1/2 15 Flanged PTFE T PTFE T RPTFE R LOKING O 3/4 20 BOY MTERIL Flanged RPTFE R RPTFE R 50/50 S GER G 1 25 Flanged /50 S 50/50 S UHMWPE U eadman S 1 1/4 32 2nd EN ONNETION Flanged UHMWPE U UHMWPE U PEEK P ctuator 1 1/2 40 Flanged PEEK P GRPHITE G GRPHITE G Bare Stem N 2 50 avity Filled 2 1/2 65 METL M 3 80 STEM BOY SET OPERTOR SIZE SEL SEL WB TFM GRPHITE TFM LEVER 2 SPEIL FETURE Media ontainment HPS41 S 2 F G F L 50 H3 Fire Safe NE Basic esign Ordering Information Flo-Tite is dedictaed to products of high quality with continuous design improvements. ll information provided is subject to change without notice. P1607 MR-0175 SME B16.34 Ball: ll ball material is supplied standard as 316SS & 304SS. If different material is required please specify as special feature. Stem: ll stem material is supplied standard as 17-4PH. Please specify as special feature if SS316 is needed. Special Features are noted at the end of the identification number, please see special feature codes. For extended number, see Tech Bulletin page 191. When placing an order or requesting a quotation, please provide as many details on the application as possible such as media type, temperature, pressure, pipe size and etc.

TITE imensions - ctuation / Flow ata Tech Bulletin Page 51G-10 Pneumatic ctuator imensions shown in this drawing are for full port units based on 80 psi air to actuator, valves with standard seats,

Tri-Pro in ontrol Valve service Flo-Tite also offers modulating V-port control valves. The V-ball is characterized to meet virtually all flow requirements. See tech bulletin page 120.

43 050 3 / 8 -- 2.72 4.81 0.504 1.54 1.57 4.06 7.3 6.12 SR063-6 4.06 7.3 6.12 063 1 / 2 6.50 2.91 4.89 0.591 1.54 1.57 4.06 7.3 6.12 SR063-6 4.06 7.3 6.12 063 3 / 4 7.50 3.38 5.17 0.787 1.70 1.57 4.73 8.

7 TITE imensions - ctuation / Flow ata Tech Bulletin Page 51G-10 Pneumatic ctuator imensions shown in this drawing are for full port units based on 80 psi air to actuator, valves with standard seats, clean fluid only at ambient temperatures and pressures not to exceed 800 psi. onsult factory for additional actuator types and dimensional drawings. Tri-Pro in ontrol Valve service Flo-Tite also offers modulating V-port control valves. The V-ball is characterized to meet virtually all flow requirements. See tech bulletin page # BW SIZE Flange NPT & B 1 2 Spring Return ctuator 80 psi 3 ctuator Model ouble cting ctuator 80 psi 3 ctuator Model 1 / SR / SR / SR / SR SR / SR / SR SR / SR SR ll figures stated above are generally accepted for valves with standard seats average breakaway torque ratings for clean wet service Torque Factors for Special pplications: 1 - increase the breakaway torque by 20% for dry gas service or demineralized water; 2 - add 10% for infrequent cycling; 3 - add 40% for slurry or light abrasive content; 4 - add 50% for metal seated valves, class V shut-off; 5 - deduct 10% for high lubricity service Torque figures are for valves at 800 psi service. For higher pressure applications consult factory. Valve torque can vary due to pressure, media and temperatures. The information provided above should be considered as a guide only and must be adjusted according to experience and judgement. ll TRI-Pro Valves have integrally cast mounting pad for ease of mounting actuation equipment. V-ports 15, 30, 60, 90 deg. V & custom designs Tri-Pro in ryogenic service The Tri-Pro series can be provided specifically for cryogenic applications. ll cryogenic ball valves have extended bonnets, they offers exceptional performance under the most extreme cold working temperature conditions. See tech bulletin page 138.

TITE Tech Bulletin Page 51H-10 superior quality, rugged, and universal purpose valve for all fluids ideal for saturated or superheated steam, slurries, semi-solids and corrosive services in endless

Swing-out center body allows easy access to internal valve components.

8 TITE Tech Bulletin Page 51H-10 superior quality, rugged, and universal purpose valve for all fluids ideal for saturated or superheated steam, slurries, semi-solids and corrosive services in endless industrial, chemical, power, gas, paper and original equipment applications. Three - Piece esign FLOTITE S True High Performance Ball Valve Technology Offers a wide selection of pipe end connections. Swing-out center body allows easy access to internal valve components. Fully Protected Body Seals Live-Loaded-Blow-Out-Proof Secure Body Bolting Integral ctuator Mounting Pad aptured Seats Weld-in-Place High Strength Stem Lockable Safety Handle Prevents seal ruptures in high pressure or steam applications Self adjust with pressure and temperature fluctuations. Blow-out proof Bottom Entry Stem, antistatic ground helps prevent accidents and injuries. ap screws - fully encapsulated secure end caps to tapped center body. Insuring ease of foolproof body assembly every time. lso protects bolts from outside environment. Ideal for actuation, ISO-5211 bolting, actuators may be retrofitted without disturbing the pipeline. llows for secondary containment unit to be added when necessary. Pocketed and recessed seats with secondary metal backup seal, meeting PI607-4, Super-TEK, TFM, 50/50, metal seats and more. Heat sink construction allows in-place welding, prevents damage to soft seat rings and eliminates the need to disassemble valve for welding. ssuring a safe & cost effective installation. Parallel flat stem head for positive ball position indication. High strength 17-4 PH stainless steel is provided as standard. Prevents valves from being opened or closed accidentally. Lock-out meets OSH standards with locking device. MTERIL INENTIFITION TRI-PRO WITH MEI ONTINMENT UNITS The I-SO-Mount platform is ideal for the addition of our secondary containment units. Flo-Tite s marking system follows MSSP guidelines. In addition to the casted body information all valves have metal name plates that identify all valve soft parts. Valve users worldwide will be able to contact Flo-Tite quickly for any installation or service requirements as the company website address will be on all valves. FLO P. O. Box 1293 Lumberton, N Website: Flo-Tite s media containment unit offers in-line maintenance for stem repair, protection for high temperature service, fugitive emission monitoring for early leak detection, positive displacement. It may also be used as a high tech stem extension. Tel: (910) Fax: (910) flotite@nc.rr.com

Tri-Pro Series. Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 WOG 1/4-3/ WOG 1-4

Tri-Pro Series. Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 WOG 1/4-3/ WOG 1-4 FLO TITEE valves & controls Tri-Pro Series Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 WOG 1/4-3/4 2250 WOG 1-4 TM Page 1 3pc High Performance Fire Safe Valves Models