Top-Guided Single-Seated Control Valves
|
|
- Angel Bruce
- 6 years ago
- Views:
Transcription
1 No. SS-AGV CV000 Alphaplus series Top-Guided Single-Seated Control Valves Model AGVB / AGVM OVERVIEW The CV 000 Alphaplus range of Top-guided Single-seat Control Valves features a compact valve body with excellent flow control and minimal loss. Alphaplus valves have large Cv values, high range ability, and accurate flow control performance. When securely held in place by a top-guided stem with a long stroke, the valve plug is highly resistant against vibration and provides flow shutoff performance that fully satisfies IEC standards. The valve also features a compact but powerful multi-spring actuator. Model AGVB/AGVM control valves are especially suitable for process control applications where high reliability and tight flow shutoff are essential.. Selection of Alphaplus specifications Selection of control valves has traditionally required knowledge and experience. However, CV000 Alphaplus offers you more accurate product specifications, so that you can easily pinpoint the control valve that satisfies fluid specifications (such as flowrate,, and temperature) at your plant and provides the functions that you need. If you do not find a valve that completely satisfies your requirements, contact the Azbil Group representative for assistance. Accessories Overview of accessories: p. - Structural diagram: p.7 - Selection method: p.7 and valve actions Air supply and spring ranges Fluid conditions - Description of fluid conditions: p.8 Plug seat - Structural diagram: p. - Selection method: p. Port diameter and flow control characteristics Plug seat ring material Body material Gland packing Dimensions and weight - Dimension: p.5 - Weight: p.5 Figure CV000 Alphaplus selection map Body - Structual diagram: p. - Selection method: p. Connection diameter Connection diameter Bonnet Body material Gland packing - - th edition
2 No. SS-AGV Basic model numbers Basic model: / to inches Model AGVB: JIS 0K, ANSI 50, JPI 50 Model AGVM: JIS 6K, JIS 0K, JIS 0K, ANSI 00, JPI 00. Optional specifications - Body Figure shows optional specifications of the body. Flange standard (flanged) Gasket Connection diameter (nominal) Gland packing Bonnet Figure Body structure Plug & Seat-ring Body Port diameter (normal) -- Azbil Corporation manufactures diameters from / inch (5 mm) to inches (00 mm) as shown in Table 6. For other diameters, we recommend a selection from the CV000 series of control valves. -- Port and flow characteristics The selection of the port and the rated Cv value falls within the scope of Table according to the. For nominal s inch (5 mm) or less, port s are expressed in terms of Cv values. characteristics depend on the rated Cv value, be set to linear model or equal percentage model. Based on the rated Cv value and the calculated necessary Cv value, check the controllability (valve position) using the flow control characteristics Tables in Figure, 5, 6, 7 and Pressure rating and end connection (flange type) We manufacture RF: JIS 0K, 6K, 0K, 0K (JIS B0-98) ANSI 50, 00 (ASME/ANSI B ) JPI 50, 00 (JPI-7S-5-99) Option: Socket weld, butt weld For other rated s and connection types, you are recommended to consider the CV 000 series of control valves. Azbil Corporation -- Bonnet style We manufacture bonnets that can be used at fluid temperatures ranging from -96 C to +00 C. The standard of plain bonnet is integral structure. (In case of with PSA6 actuator, plain bonnet is welded structure.) The standards of Extension type I and II bonnet are welded structure. Table Bonnet Body material SCPH [Unit: C] SCSA/SCSA Plain -5 to +0-7 to +0 Extension type I (High Low temperature) Extension type II (Liquid O N) +0 to to to to -5 For fluid temperatures outside the above temperature range, we recommend a selection from the CV000 series of control valves. --5 Body, plug and seat ring materials For combinations of body, plug and seat ring materials and their applicable temperature ranges, see Table 7. In some ranges the plug seat ring material needs hardening treatment. See Figure 0. When you select a soft seat, refer to Figure. For materials other than those shown in Table 7, we recommend a selection from the CV000 series of control valves, or other Azbil Corporation's series of control valves. --6 Valve seat leakage For the seat leak performance when the valve is fully closed, select from among the following four classifications, which conform to IEC 605-:006 and JIS B 005-:008 : Class IV: 0 - rated Cv value (0.0% of rated Cv value) Class IV-S: X rated Cv value (0.0005% of rated Cv value) Class V: Valve differential (MPa) Port (mm) /h Class VI: valve differential (MPa) leakage coefficient m /min. shown below Table Leakage coefficient value inches (mm) Leakage coefficient (5) ¼ () ½ (0) (50) ½ (65) (80) (00) For shutoff valves, choose either Class V or VI. To maintain over time the performance of Class V or Class IV-S valves, the plug seat material requires hardening treatment. Class IV valves, seat type is soft seat ). Additionally with the selection of the low-temperature service, oil-proof, water-proof service for the choice of material seat, the set leakage is Class IV-S. - -
3 Azbil Corporation No. SS-AGV Inherent range ability: Table Inherent range ability Vs rated Cv value Rated Cv Inherent Range ability 0., 0.6, 0.5, 0. 0: 0.6 0:.0 or more than.0 50:(75:*) *:Optional, metal seat and equal percentage only. --8 Gland packing According to your application, select appropriate type of gland packing from among the following: Table Selection of gland packing Usage Type Material General use (oils, solvent acids, alkalis, etc.) PTFE yarn packing (P59) Woven PTFE yarn with carbon fiber core General use and oil-free treatment V shaped PTFE packing PTFE molding Vacuum service V shaped PTFE packing (direct+reverse mounted) PTFE molding Low temperature service V shaped PTFE packing PTFE molding High temperature service Graphite yarn pacing* (P660CL+P67) Graphite Low leakage spec. for VOC* regulation PTFE yarn packing(p59) with live load structure (SECURE-SEAL TM )* Note) PTFE: polytetrafluoroethylene resin * Grease provided * Volatile Organic Compound * Refer to No.SS-SSL about detail of SECURE-SEAL TM. Woven PTFE yarn with carbon fiber core For other gland packing materials, please provide closest model No. and Azbil Corporation will take your request under advice. * PTFE yarn packing V type PTFE packing V type PTFE (direct + reverse) Figure Gland packing structure Note) * Grease provided by lubricator Graphite yarn packing - -
4 No. SS-AGV Azbil Corporation --9 Gasket Table 5 Selection of gasket Between bonnet and body Between seat ring and body Super-low temperature / Oil-free (Liquid O N ) Spiral-shaped gasket Hoop material: Filler material: PTFE Metal gasket General / Low temp. High temperature Oil-free treatment Metal gasket V5) Not necessary Metal gasketv5 Metal gasketv56 (Monel) Metal gasket V5 ) Metal gasket V56 ) Table 6 Models of AGVB and AGVM (5) / (0) inches (mm) / (5) ½ (0) (50) ½(65) (80) (00) Port (inches) ¼ ½ ¼ ½ ½ ½ ½ ½ 0.6 Rated Cv value Rated travel (mm) characteristics Fig. Fig. 5 Fig. 6, Cv Value (%) 60 0 Cv Value (%) 0 0 Cv Value (%) 0 0 Cv Value (%) Travel (%) Travel (%) Travel (%) Travel (%) Figure Cv values 0., 0.6, and 0.5 (linear model) Figure 5 Cv values 0. to (equal percentage model) Figure 6 Port to inches (equal percentage model) Figure 7 Cv values 0.~ (linear model) Cv Value (%) Travel (%) 00 Figure 8 Port ½ to inches (linear model) Scope of control generally considered feasible. (*Cv value in percentage and travel in percentage.) * Grease provided by lubricator - -
5 Azbil Corporation No. SS-AGV Bonnet Gasket Valve plug Seat ring Body Figure 9 Development view of AGVB/AGVM Table 7 Body, plug and seat ring material Material combination Temperature ranges ( C) SUS 6-5 to to to +00 SUS 6 Stellite -5 to to to +00 SUS0C -5 to to SUS 6 soft seat -5 to +0-5 to +0-5 to +0 SUS 6 Stellite face -5 to to to +00 SUS 6L - -5 to to +00 SUS 6L Stellite to to +00 Body material Note) JIS SCPH SCSA SCSA ASTM A6WCB A5CF8 A5CF8M *: Parts that adjust flow (such as a plug and a seat ring) are referred to as the valve trim. Normal differential {kgf/cm} 70 {5} 98 {0} 90 {5} Range that requires a stellite Fluid temperature ( C) Figure 0 Temperature and normal differential ranges requiring a stellite Figure Temperature and maximum differential ranges for soft seat Note) ) Depending on the methods of hardening treatment, stellite welding or SUS0C is available. ) For valves for cavitation/flashing service, oil-proof service, or tight shutoff service, a stellite is recommended regardless of process fluid temperatures or differential s. ) For valves for cavitation/flashing service for water or for valves for superheated water above 00 ºC, SUS 0C is recommended. Note) ) When there is a possibility of erosion by such fluids as saturated steam and heated water please use metal seats. ) WIth the fluid connecting parts (inside the body) the material of the seat which oil-proof washing treatment had been completed is PTFE entered with glass. Maximum differential {kgf/cm} --0 Structural drawing of trim and body/trim material combinations Following table shows typical body/trim material combinations. Please contract us about materials that are not listed in the table. 90 {0} 70 {5} PTFE with carbon fiber Fluid temperature ( C) 90 {0} 70 {5} 90 {5} Valve stem Valve stem 6 5 Guide bushing Bonnet gasket Valve plug Seat ring Seat gasket Figure Structural drawing of trim (with guide bushing) 6 5 Bonnet gasket Valve plug Seat ring Seat gasket Figure Structural drawing of trim (without guide bushing) - 5 -
6 No. SS-AGV Azbil Corporation Table 8 The valve body material is carbon steel (SCPH/A6WCB). Stellite Valve plug SUS0C soft seat Stellite face Seat ring General Oil-free General General Oil-free General Oil-free Valve stem Guide bushing SUS0C SUS0C Stellite SUS0C Stellite face Stellite Stellite face Seat gasket Bonnet gasket Without -7 to +0ºC) Monel above +0ºC) -7 to +0ºC) above +0ºC) Without -7 to +0ºC) Monel above +0ºC) -7 to +0) above +0) Without -7 to +0ºC) Monel above +0ºC) -7 to +0ºC) above +0ºC) Without Valve plug L L Stellite L soft seat Seat ring General Oil-free General Oil-free General Oil-free Valve stem L L L Guide bushing L L Stellite L Stellite L Stellite face Stellite face Seat gasket Bonnet gasket Without -7 to +0ºC) Monel above +0ºC) -7 to +0ºC) above +0ºC) Without -7 to +0ºC) Monel above +0ºC) -7 to +0ºC) above +0ºC) Table 9 The valve body material is stainless steel (SCSA/A5CF8 or SCSA/A5CF8M) Without Valve plug SUS0C * Stellite Stellite face soft seat Seat ring General Oil-free General General Oil-free General Oil-free Valve stem Guide bushing Seat gasket Bonnet gasket Without: bonnet guide -7 to +0ºC) above +0ºC and below -7ºC ) Without -7 to +0ºC and below -7ºC) Monel above +0ºC) -7 to +0ºC and below -7ºC) above +0ºC) Stellite face SUS0C Without -7 to +0ºC and below -7ºC) Monel above +0ºC) -7 to +0ºC and below -7ºC) above +0ºC) Stellite Without -7 to +0ºC and below -7ºC) Monel above +0ºC) -7 to +0ºC and below -7ºC) above +0ºC) Stellite Without (bonnet guide) -7 to +0ºC) above +0ºC and below -7ºC ) Without Stellite face Valve plug L L Stellite L soft seat Seat ring General Oil-free General Oil-free General Oil-free Valve stem L Without: bonnet guide Without: bonnet guide -7 to +0ºC) L L -7 to +0ºC) L Guide bushing L Stellite L Stellite face Stellite L Stellite face above +0ºC and below -7ºC ) below -7ºC ) Seat gasket Bonnet gasket Note) Without -7 to +0ºC and below -7ºC) Monel above +0ºC) -7 to +0ºC and below -7ºC) above +0ºC) Without -7 to +0ºC and below -7ºC) Monel above +0ºC) -7 to +0ºC and below -7ºC) above +0ºC) * SUS0C is applicable to body material SCSA/A5CF8M. Without - 6 -
7 Azbil Corporation No. SS-AGV Air connection end of air-fail-open model Air connection end of air-fail-close model Spring Diaphragm: cloth embedded propylene rubber Yoke: carbon steel A6WCB (SCPH) n Scale plate: stainless steel r Stem connector and valve actions Selection of actuator actions determines valve actions (in response to input signals). Air-to-open: actuator action where the valve opens as the input signal increases Air-to-close actuator action where the valve closes as the input signal increases With the Alphaplus, the valve closes as the plug lowers. The valve action depends, in turn, on whether an air-toopen or air-to-close actuator is chosen. The material of bolt and nut are SUS0. Tables of allowable differential s Ensure the required shutoff differential specified in the equipment design is satisfied by selecting an actuator with an allowable differential equal to or higher than the shutoff, according to the seat leakage class. Leakage, specification Class IV (0.0% of rated Cv value) Model AGVB Air-to-open: Table and Air-to-close: Table and Model AGVM Air-to-open: Table 5 and 6 Air-to-close: Table 7 and 8 Leakage, specification Class V (high shutoff model: metal seat) or Class IV-S (0.0005% of rated Cv value) Model AGVB Air-to-open: Table 9 and 0 Air-to-close: Table and Model AGVM Air-to-open: Table and Air-to-close: Table 5 and 6 Leakage, specification Class VI (high shutoff model: soft seat) Model AGVB Air-to-open: Table 7 and 8 Figure structure Air-to-close: Table 9 and 0 Model AGVM Air-to-open: Table and Air-to-close: Table and At your request, we can manufacture control valves with normal s exceeding.96 MPa. and spring ranges Select the actuator using the table of allowable differential s. The table also assists in determining the actuator's required supply and required spring range. If the applicable value in the table of allowable differential s is not large enough for the shutoff you need, we sill, at your request, consider a larger actuator. Performance (with positioner) PSA PSA to PSA6 VPE Linearity AVP HEP HTP Hysteresis error 5 Finish The normal standard coating color for Azbil Corporation's control valves is blue (Munsell color 0B 5/0). Silver is also available as standard. You can specify any other color using the number code of the Japan Paint Industry Assignment or the Munsell color system. Standard colors are also used for such optional accessories as positioners, regulator with filter, and solenoid valves. 6 Ambient temperature -0 to 70 ºC - 7 -
8 No. SS-AGV Azbil Corporation. Fluid conditions Please clear the fluid conditions as follows Q P P ΔP Figure 5 Fluid flow Table 0 Fluid condition Mark Name Description - Fluid name Name or symbol of fluid to flow through control valve Q rate Maximum (MAX), normal (NOR), and minimum (MIN) flow rates to be controlled P Upstream Pressure on upstream side of control valve (P in Figure 5) P Downstream Pressure on downstream side of control valve (P in Figure 5) P Differential Pressure loss at control valve ( P in Figure 5) P close Differential when fully closed Differential when the valve is fully closed (actuator selection condition) Temp Temperature Temperature of fluid on upstream side G Specific gravity Specific gravity of the fluid V Viscosity Viscosity at the temperature of the fluid on upstream side - Flashing % Weight percentage of flashing to occur on downstream side when is reduced by the control valve Calculation of the Cv values and expected noise Selection of Cv values: No. IB Selection of expected noise: No. IB Azbil Corporation has developed personal computer software to calculate Cv values and expected noise. Please specify if you require such a PC-based tool
9 Azbil Corporation No. SS-AGV Valve seat leakage, Class IV: 0.0% of the rated Cv value Table Model AGVB flange nominal /, /, and inch Note that the allowable differential varies with the rated Cv value you have selected. Air-to-open inches / / PSAR PSAR Spring range Differential (by Cv value) {6.8} Table Model AGVB nominal ½,, ½, and inches Note that the allowable differential varies with the port (inches) you have selected. Air-to-open inches ½ ½ Spring range 00 {0.} 550 {5.6} 070 {0.9} 0 {.} 800 {8.} Differential (by port (inches)) ¼ ½ ½ PSAR {.} {.6} {.8} {.} {8.} {.} {7.} PSAR {8.} {5.0} {.} {.0} 0 {.} PSAR {.5} {8.9} {6.0} {.6} PSAR {5.} {0.5} {6.} PSAR {6.} {.6} {.} {5.6} {.} {6.} PSAR {0.5} {6.} {.9} {.6} {9.} {0.9} PSA6R to {.6} {.0 to.8} {.8} to 0 {.0 to.5} - 9 -
10 No. SS-AGV Azbil Corporation Valve seat leakage, Class IV: 0.0% of the rated Cv value Table Model AGVB nominal /, / and inch Note that the allowable differential varies with the rated Cv value you have selected. Air-to-close inch / / PSAD PSAD Spring range Differential (by Cv value) {.} {0.5} Table Model AGVB nominal ½,, ½, and inches Note that the allowable differential varies with the port (inches) you have selected. Air-to-close inches ½ ½ PSAD PSAD PSAD PSAD PSAD PSAD Spring range.the maximum allowable differential s must not exceed the maximum working s 860 {8.9} Differential (by port (inches)) ¼ ½ ½ 00 {0.5} 860 {8.9} 60 {6.5} 50 {.7} 0 {.6} 0 {.} 780 {7.9} 80 {8.5} 50 {5.} 90 {5.} 90 {5.} 60 {.6} 60 {.7} 500 {5.} 500 {5.} 900 {9.} 890 {9.0} 0 {6.} 50 {5.6} 890 {9.0} 0 {6.} 50 {5.6} 550 {5.6} 990 {0.0} 950 {9.6} 700 {7.} 70 {7.} 680 {6.9} 0 {.5} 0 {.} 00 {.} 90 {.} 80 {.9} 700 {7.0} - 0 -
11 Azbil Corporation No. SS-AGV Valve seat leakage, Class IV: 0.0% of the rated Cv value Table 5 Model AGVM nominal /, / and inch Note that the allowable differential varies with the rated Cv value you have selected. Air-to-open (inch) / / PSAR PSAR Spring range Differential (by Cv value) {6.8} {.8} 00 {0.} 550 {5.6}. In the differential column, upper figures show normal differential s and lower figures differential s when the valve is fully closed. 870 {9.5} {0.9} {.6} {0.} 0 {.} 890 {9.5} 800 {8.} - -
12 No. SS-AGV Azbil Corporation Valve seat leakage, Class IV: 0.0% of the rated Cv value Table 6 Model AGVM nominal ½,, ½, and inches Note that the allowable differential varies with the port (inches) you have selected. Air-to-open (inches) ½ ½ PSAR PSAR PSAR PSAR PSAR PSAR PSA6R 60 {.6} 00 Spring range 00 to 80 {.0 to.8} 00 to 0 {.0 to.5} Differential (by port (inches)) ¼ ½ ½ 0 {.} 50 {.6} 70 {.8} 00 {.} {8.} {.} {7.} {9.5} {8.} {5.0} {.} {.0} {.} {5.} {.9} {.5} {8.9} {6.} {.6} 80 {.} {5.} {5.} {5.0} 00 {0.5} 60 {6.} 90 {.6} {6.} {.6} {.} {5.6} {.} {6.} {.} {5.} {0.5} {6.} {.9} {9.} {0.9} {.6} {7.0} {.8} {6.} {6.} 050 {.}. In the differential column, upper figures show normal differential s and lower figures differential s when the valve is fully closed. - -
13 Azbil Corporation No. SS-AGV Valve seat leakage, Class IV: 0.0% of the rated Cv value Table 7 Model AGVM nominal /, / and inch Note that the allowable differential varies with the rated Cv value you have selected. Air-to-close (inches) / / PSAD PSAD Spring range 0 to 00 Differential (by Cv value) {.} 00 {0.5} {.} {6.0} {8.9} {6.8} {5.} 90 {50.} 680 {7.} 80 {9.}. In the differential column, upper figures show normal differential s and lower figures differential s when the valve is fully closed. 000 {0.} 600 {6.7} - -
14 No. SS-AGV Azbil Corporation Valve seat leakage, Class IV: 0.0% of the rated Cv value Table 8 Model AGVM nominal ½,, ½, and inches Note that the allowable differential varies with the port (inches) you have selected. Air-to-close (inches) ½ ½ PSAD PSAD PSAD PSAD PSAD PSAD Spring range Differential (by port (inches)) ¼ ½ ½ 00 {0.5} 60 {6.5} 0 {.} 60 {.6} {8.9} {.7} {7.9} {.7} {5.} {7.7} {5.6} {.6} {8.5} {5.} {5.} {9.} {6.7} {.7} {9.5} {9.6} {5.} {9.0} {.} {6.} {0.} {7.} 550 {6.} {5.6} {8.6} {6.} {7.} {8.} 90 {5.} 890 {9.0} {6.} {7.} 550 {5.6} 990 {0.0} 70 {7.} {0.}. In the differential column, upper figures show normal differential s and lower figures differential s when the valve is fully closed. 0 {.} 00 {.} {.} 90 {.} {.} {5.6} {9.6} {6.9} {.9} {6.} {7.} {.5} {7.0} {7.} {8.} {.6} - -
15 Azbil Corporation No. SS-AGV Valve seat leakage, Class V and Class IV-S: high shutoff model: metal seat Table 9 Model AGVB nominal /, / and inch Note that the allowable differential varies with the rated Cv value you have selected. Air-to-open (inch) / / PSAR Spring range Differential (by Cv value) Table 0 Model AGVB nominal ½,, ½, and inches Note that the allowable differential varies with the port (inches) you have selected Air-to-open (inches) ½ ½ PSAR PSAR PSAR PSAR PSAR PSAR PSA6R 60 {.6} 00 Spring range 00 to 80 {.0 to.8} 00 to 0 {.0 to.5} Table Model AGVB nominal /, / and inch Note that the allowable differential varies with the rated Cv value you have selected. Air-to-close (inch) / PSAD Spring range Differential (by port (inches)) ¼ ½ ½ 0 {.] 80 {8.} 660 {6.9} 660 {6.9} / PSAD 660 {6.7} 550 {5.8} 90 {9.} 790 {8.} 570 {5.8} 00 {.} 850 {8.9} 90 {.0} 550 {5.6} 90 {9.} Differential (by Cv value) {6.8} 0 50 {.7} - 5 -
16 No. SS-AGV Azbil Corporation Valve seat leakage, Class V and Class IV-S: high shutoff model: metal seat Table Model AGVB nominal ½,, ½,, and inches Note that the allowable differential varies with the port (inches) you have selected. Air-to-close (inches) ½ ½ PSAD PSAD PSAD PSAD PSAD PSAD Spring range Differential (by port (inches)) ¼ ½ ½ 0 {.} 880 {9.0} 790 {8.} 790 {8.} Table Model AGVM nominal /, / and inch Note that the allowable differential varies with the rated Cv value you have selected. Air-to-open (inch) / / PSAR PSAR 50 {.7} 600 {6.} 0 {.6} Spring range 00 {.} 0 {.} 950 {9.7} 850 {8.9} 950 {9.7} 850 {8.9} 70 {.8} 00 {0.5} 60 {.6} 80 {8.7} 660 {6.7}. In the differential column, upper figures show normal differential s and lower figures differential s when the valve is fully closed. 900 {9.} 0 {.5} 780 {8.} Differential (by Cv value) {8.0} {0.} 00 {.8} - 6 -
17 Azbil Corporation No. SS-AGV Valve seat leakage, Class V and Class IV-S: high shutoff model: metal seat Table Model AGVM nominal ½,, ½, and inches Note that the allowable differential varies with the port (inches) you have selected. Air-to-open (inches) ½ ½ PSAR PSAR PSAR PSAR PSAR PSAR PSA6R 60 {.6} 00 Spring range 00 to 80 {.0 to.8} 00 to 0 {.0 to.5} Differential (by port (inches)) ¼ ½ ½ {.} {6.7} {0.} {5.8} {8.} {.9} {.7} {6.9} {6.} {0.} 080 {.} {6.9} {0.} 080 {.} {8.0}. In the differential column, upper figures show normal differential s and lower figures differential s when the valve is fully closed. Table 5 Model AGVM nominal /, / and inch Note that the allowable differential varies with the rated Cv value you have selected. Air-to-close (inch) / / PSAD PSAD Spring range 90 {9.} 790 {8.} 570 {5.8} 00 {.} {8.9} {7.} 70 {5.}. In the differential column, upper figures show normal differential s and lower figures differential s when the valve is fully closed. 90 {.0} 550 {5.6} 90 {9.} 50 {5.7} Differential (by Cv value) {6.8} {.} {.7} 500 {5.5} - 7 -
18 No. SS-AGV Azbil Corporation Valve seat leakage, Class V and Class IV-S: high shutoff model: metal seat Table 6 Model AGVM nominal ½,, ½, and inches Note that the allowable differential varies with the port (inches) you have selected. Air-to-close (inches) ½ ½ PSAD PSAD PSAD PSAD PSAD PSAD Spring range 0 to 98{0. to.0} Differential (by port (inches)) ¼ ½ ½ {.7} {6.} {.} {.} {.} {0.8} {.6} {9.0} {.} {5.5} 0 {8.} {8.} {8.} 670 {7.6} 00 {.5} 950 {9.7} 90 {5.8} {8.9} {5.0} {.6} {8.} {9.7} {.8} {.6} {8.7} {9.} {5.8} {7.} {8.9} {0.5} {6.7} {.5} 00 {.6} {8.0} {9.} {.}. In the differential column, upper figures show normal differential s and lower figures differential s when the valve is fully closed
19 Azbil Corporation No. SS-AGV Valve seat leakage, Class VI: high shutoff model: soft seat Table 7 Model AGVB nominal /, / and inch Note that the allowable differential varies with the rated Cv value you have selected. Air-to-open (inch) / / PSAR PSAR Spring range 80 to 0{0.8 to.} 80 to 0{0.8 to Differential (by Cv value) } Table 8 Model AGVB nominal ½,, ½, and inches Note that the allowable differential varies with the port (inches) you have selected. Air-to-open (inches) ½ ½ PSAR PSAR PSAR PSAR PSAR PSAR Spring range {9.6} Table 9 Model AGVB nominal /, / and inch Note that the allowable differential varies with the rated Cv value you have selected. Air-to-close (inch) / / PSAD PSAD Spring range {.7} 0 00 {0.5} Differential (by port (inches)) ¼ ½ ½ 00 {0.5} {.7} {.9} 70 {7.7} {.0} 60 {6.5} 580 {6.} 580 {6.} 960 {9.8} {6.5} 50 {.8} Differential (by Cv value) {.6} {.6} {7.0} {.9} 770 {7.9} 0 0 {.} {5.} {6.5} {.} {9.5} {.5} {8.} 750 {7.8} - 9 -
20 No. SS-AGV Azbil Corporation Valve seat leakage, Class VI: high shutoff model: soft seat Table 0 Model AGVB nominal ½,, ½,, and inches Note that the allowable differential varies with the port (inches) you have selected. Air-to-close (inches) ½ ½ PSAD PSAD PSAD PSAD PSAD Spring range Differential (by port (inches)) {kgf/ cm } ¼ ½ ½ 860 {9.0} {.} 70 {7.} {8.} {.} {7.8} {.9} {6.9} {.9} 860 {8.0} 0 {9.0} 880 {.} 00 {.} {7.} {0.7} 0 {.5} {9.0} {.} {.5} {7.} {0.7} {5.6} {.5} {.} 70{ } {9.8} {.5} {7.} {.8} {.9} {.9} 80 {8.6} PSAD {.} {0.0} Table Model AGVM nominal /, / and inch Note that the allowable differential varies with the rated Cv value you have selected. Air-to-open (inch) / / PSAR PSAR Spring range Differential (by Cv value) {0.0}. In the differential column, upper figures show normal differential s and lower figures differential s when the valve is fully closed {0.0} {.7} {9.} {.8} {0.5} 50 {5.0} - 0 -
21 Azbil Corporation No. SS-AGV Valve seat leakage, Class VI: high shutoff model: soft seat Table Model AGVM nominal ½,, ½, and inches Note that the allowable differential varies with the port (inches) you have selected. Air-to-open inches ½ ½ PSAR PSAR PSAR PSAR PSAR PSAR Spring range Differential (by port (inches)) ¼ ½ ½ 00 {0.5} 60 {.7} 80 {0.7} {7.7} {.0} {6.5} {5.0} {6.} {0.0} {.} {0.0} {9.0} {6.} {9.8} {6.5} {.9} {.} {9.6} {.8} {7.9} {0.0} {9.0}. In the differential column, upper figures show normal differential s and lower figures differential s when the valve is fully closed. Table Model AGVM nominal /, / and inch Note that the allowable differential varies with the rated Cv value you have selected. Air-to-close (inch) / / PSAD PSAD Spring range {.6} Differential (by Cv value) 0 {.6} 90 {0.0}. In the differential column, upper figures show normal differential s and lower figures differential s when the valve is fully closed {.6} 690 {7.0} 0 {.} {5.} {0.} 90 {0.0} {6.5} 0 {.} 60 {6.7} {9.} {.6} {8.} {6.0} {7.9} {0.0} {.8} 90 {0.0} - -
22 No. SS-AGV Azbil Corporation Valve seat leakage, Class VI: high shutoff model: soft seat Table Model AGVM nominal ½,, ½, and inches Note that the allowable differential varies with the port (inches) you have selected. Air-to-close inches ½ ½ PSAD PSAD PSAD PSAD PSAD PSAD Spring range {kgf/ cm } Differential (by port (inches)) ¼ ½ ½ 0 {.} {8.9} {.} {7.} 60 {6.7} {7.8} {.9} {6.9} {.9} 860 {9.0} {0.} {.} {9.0} {.} {7.} {0.7} {8.} {.} {0.0} {0.0} {8.} {.} 0 to 98{0. to.0} 90 {0.0} 90 {0.0}. In the differential column, upper figures show normal differential s and lower figures differential s when the valve is fully closed {.5} {7.} {0.} {0.0} {.} 880 {9.0} 00 {.} 50 {.5} 70 {7.} 050 {0.7} 550 {5.6} 0 {.5} {7.} {0.0} {.9} {0.} {.5} {7.} {.8} {.} {0.0} {0.0} {.} 0 {.} 960 {9.8} 90 {.9} 80 {.9} {8.6} {0.0} - -
23 Azbil Corporation No. SS-AGV Accessories 5- Hand wheel Use: The manual hand wheel enables you to open and close the valve manually. Orientation: Side hand wheel, which is mounted to the yoke of the actuator. Figure 6 Side hand wheel 5- Positioner Use: In response to input signals from the controller, the positioner controls the valve accurately and swiftly, switches between direct and reverse operation, and changes valve characteristics. Models: According to input signals and applications, select one of the models shown below. Model AVP70X/0X Smart valve positioner Input signal: AVP00 to 0mADC (Any split range is available) AVP0 to 0mADC (with travel transmission) AVP70 HART communication protocol (with travel transmission) AVP70/0 HART communication protocol AVP70 Foundation TM fieldbus Common Model: JIS C 090 water-proof NEMA TYPEX, IP66 Approval: TIIS Flameproof, FM Explosionproof, FM Intrinsically safe, CSA Explosionproof, ISSeP/ATEX Flameproof, KEMA/ ATEX Intrinsically safe HEP model Single acting pneumatic positioner HEP 5: JIS Flameproof HEP 6: JIS Intrinsically Safe HEP 7: JIS Safe water-proof HEP 8: FM intrinsically safe HEP 9: FM intrinsically safe Input signal: to 0mA DC Half range: ( to or to 0mA DC) Note) In the photograph, the regulator is attached. VPE 0/05 model Single acting pneumatic positioner Input signal: 0. to.0 kgf/cm 0 to 00 and half range Note) Usable with PSA only. HTP model Single acting pneumatic positioner Input signal: 0. to.0 kgf/cm 0 to 00 and half range - -
24 No. SS-AGV Pressure regulator with filter Function: The Pressure regulator with filter reduce the of application air, drains application Model: air, and removes foreign substances. The model KZ0 is the standard. 5-6 Booster relay Azbil Corporation Use: The booster relay improves the working speed of the control valve. Model: Use a booster relay that amplifies the output signals of the positioner. KZ0 Pressure regulator with filter 5- Solenoid valve Function: Electric signals make the solenoid valve to Model: open and close the control valve. According to applications, select one of those shown below. Waterproof model: J0b75type (Maker: Nippon Asco) Explosionproof model: JEJ0G7 (Maker: Nippon Asco) 5-7 Lock-up valve Function: In response to air signals or in anticipations of fluctuations in the supply, the lock-up valve maintains the Model: Booster relay (IL 00-0) made by SMC position of the control valve. single acting selector switch, which reverts on recovery. You can freely set the change-over within the range from to 690. Three-way solenoid valve made by Nippon Asco 5-5 Limit switch Function: The limit switch converts the open and closed positions of the control valve into electric Model: signals. The roller lever actuator is standard. According to applications, select one of the models shown below. Waterproof model: VCL500 Explosionproof model: VCX700 Lock-up valve (IL 0-0 type) made by SMC Please check specification (explosion proof, power supply or additional voltage, connection method of electric wiring) about electric equipment, such as positioner, solenoid valve and limit switch. Roller lever type limit switch - -
25 Azbil Corporation No. SS-AGV Dimensions and weight Table 5 and 6 show the dimensions and weight of the control valves. Note that the addition of any optional specifications will change their installed dimensions and weights. Table 5 Main dimensions Connection diameter (inches) /, / Note) ½ ½ JIS0K ANSI50JPI 50* JIS6K * : Face-to-face dimentions conform to following standards. - IEC 605--:00 - JIS B 005--:005 * : H +5 mm for PSA6 with hand wheel. A JIS0K, 0K ANSI00 JPI00* Dimensions (mm) JIS0K, 6K, 0K, 0K ANSI50, 00 JPI50, 00 SW BW General use bonnet H Extension type I bonnet Extension type II bonnet PSAD, R PSAD, R PSAD, R PSAD, R PSAD, R PSAD, R PSAD, R PSAD, R PSAD, R PSAD, R PSAD, R PSAD, R PSAD, R PSAD, R PSA6R PSAD, R PSAD, R PSA6R PSAD, R PSAD, R PSA6R Table 6 Product weight (kg) Body / / ½ (inches) φ B JIS 0K JIS 0K JIS 0K JIS 0K JIS 0K JIS 0K JIS 0K JIS 0K Pressure 0mm ANSI 50 ANSI 00 ANSI 50 ANSI 00 ANSI 50 ANSI 00 ANSI 50 ANSI 00 rating JPI 50 JPI 00 JPI 50 JPI 00 JPI 50 JPI 00 JPI 50 JPI 00 PSA PSA PSA PSA 68 7 PSA 6 H Body (inches) ½ JIS 0K JIS 0K JIS 0K JIS 0K JIS 0K JIS 0K JIS 0K JIS 0K Pressure ANSI 50 ANSI 00 ANSI 50 ANSI 00 ANSI 50 ANSI 00 ANSI 50 ANSI 00 rating JPI 50 JPI 00 JPI 50 JPI00 JPI 50 JPI 00 JPI 50 JPI 00 PSA 0 PSA 6 PSA PSA PSA A B Figure 7 Face-to-face dimensions and overall dimensions - 5 -
26 No. SS-AGV Azbil Corporation The overall dimensions and the valve weight will change when a manual hand wheel is mounted. Ins standard mounting, the position of operation of the side hand wheel is at the back of the actuator (on the side opposite that the valve positioner is mounted). Table 7 Hand wheel dimensions Dimension (mm) Maximum Weight Type of hand driving force of hand wheel Weight wheel F K N (kgf) (kg) PSAD, R (9) 5 7 PSAD, R 00 0 () Side hand PSAD, R (65) wheel 5 7 PSAD, R (85) PSA6R () 5 F Figure 8 Side hand wheel (PSA~) K K φ F Figure 9 Side hand wheel (PSA6) - 6 -
27 Azbil Corporation No. SS-AGV Orientation (PSA ) Side-mounted hand wheel Positioner Positioner Positioner Side-mounted hand wheel Side-mounted hand wheel Positioner Side-mounted hand wheel Positioner Positioner Side-mounted hand wheel No. (Standard) No. No. No. (PSA6 ) Side handle Positioner Positioner Positioner Side handle Side handle Positioner Positioner Side handle Side handle Positioner No. (Standard type) No. No. No. Figure 0 orientation Note) Indicate by position number when installation other than the standard type is required
28 Please, read Terms and Conditions from following URL before the order and use. Specifications are subject to change without notice. -- Kawana, Fujisawa Kanagawa 5-85 Japan () st edition: June 995 th edition: Aug. 05 No part of this publication may be reproduced or duplicated without the prior written permission of Azbil Corporation.
Electric Top-Guided Single-Seated Control Valves
No. SS2-AGV200-0300 CV3000 Alphaplus series Electric Top-Guided Single-Seated Control Valves Model AGVB / AGVM OVERVIEW The CV3000 Alphaplus range of top-guided single-seat control valves features a compact
More informationCV3000 Alphaplus series Top and Bottom Guided Double-Seat Control Valves (6 to 12inches)
No. SS2-ADV100-0100 CV3000 Alphaplus series Top and Bottom Guided Double-Seat Control Valves (6 to 12inches) OVERVIEW Model ADVB / ADVM The CV3000 Alphaplus top and bottom guided double-seat control valves
More informationTop-Guided Single-Seated Control Valves
No. SS-AGV00-0001 (Rev.11) CV3000 Alphaplus series Top-Guided Single-Seated Control Valves Model AGVB / AGVM OVERVIEW The CV 3000 Alphaplus range of Top-guided Single-seat Control Valves features a compact
More informationCV3000 Series Pressure Balanced Cage type Control Valve
No. SS2-8113-1100 CV3000 Series Pressure Balanced Cage type Control Valve OVERVIEW Model HCB Pressure Balanced Cage Type Control Valves are designed for heavy duty services. The compact valve body, having
More informationCV3000 Series Pressure-Balanced Cage type Control Valve
No. SS2-ACP110-0100 OVERVIEW The model ACP pressure-balanced cage type control valves are designed for heavy duty service. The valve plug employs a pressure balance function to control high differential
More informationPneumatically-Operated, Single-Seated Control Valve
No. SS-ACT100-0100 OVERVIEW The NEW10-III is a compact, lightweight, and economical simple-function control valve designed for JIS10K process line. It is highly reliable and best suited for process con
More informationCV3000 Series Smart-Port Single Seated Control Valves Model HLC
CV3000 Series Smart-Port Single Seated Control Valves Model HLC OVERVIEW Model HLC Small-Port Cage Guide Type Single Seated Control Valves are designed for high differential pressure Service where fluid
More informationCage type Single Seated Control Valves
No. SS-8-00 OVERVIEW Model HSC Cage Type Single Seated Control Valves are designed for high differential pressure heavy-duty service where flashing/cavitation may occur. Further, they are ideal for preventing
More informationCeramic Trim Angle Control Valves
No. SS2-8113-2610 Ceramic Trim Angle Control Valves Model HAF OVERVIEW Model HAF ceramic trim angle control valves provide the valve plug and sheet ring employing high performance ceramic with excellent
More informationLabyrinth Trim Angle Control Valves
No. SS2-8113-2620 Labyrinth Trim Angle Control Valves Model HAL OVERVIEW Model HAL labyrinth trim angle control valves provide the valve plug with Labyrinth groove to restrict generation of cavitation
More informationLow leakage Pressure Balanced Cage type Control Valves Model AC2
No. SS2-AC2001-00 Low leakage Pressure Balanced Cage type Control Valves Model AC2 Overview The model AC2 low leakage pressure balanced cage type control valves are designed for heavy duty service. The
More informationCV3000 Series Low-Noise Cage type Control Valve Model ACN
No. SS2-ACN110-0100 CV3000 Series Low-Noise Cage type Control Valve Model ACN OVERVIEW The model ACN low-noise cage type control valves are designed to reduce acoustic noise in services of compressible
More informationTop-Guided Single Seated Control Valves (Rating : ANSI 600 or Less)
No. SS2-8-0 Top-Guided Single Seated Control Valves (Rating : ANSI 0 or Less) OVERVIEW Model VST control valves are suitable for use in fluid with slurry because of its one side guiding construction. Guide
More informationAngle type Control Valves for High Pressure Service
No. SS2-HAH100-0100 Angle type Control Valves for High Pressure Service Model HAH OVERVIEWS The high service angle type control valves (model HAH) are rated at ANSI 2500 and hard alloy is employed to valve
More informationThree Way Control Valves
No. SS2-MT100-0100 Three Way Control Valves Model MT OVERVIEW The valve model MT is a three-way control valve for diverting and mixing service. The actuator employed is of a multispring type and has a
More informationHigh Pressure Service Cage type Double Seated Control Valves (Rating: ANSI 900 to 2500)
High Pressure Service Cage type Double Seated Control Valves (Rating: ANSI 900 to 2500) Model VDC OVERVIEW Model VDC high pressure service control valve with body rating of ANSI 900, JIS 63K or up provides
More informationThree Way Control Valves
No. SS2-HDT110-0100 Three Way Control Valves Model HDT OVERVIEW The valve model HDT is a three-way control valve for diverting service. It has a small-sized, high-output diaphragm motor which is suitable
More informationD1 Series Top Guided Single Seated Control Valves
D1 Series Top Guided Single Seated Control Valves Model D1S Overview Model D1S globe control valves are with bolted bonnet and top guided contoured trims. The design facilitates easy access to internal
More informationSingle Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
More informationEccentric Rotary Control Valve (For size 1 to 4 inches)
No. SS2-VFR100-0200 FloWing Eccentric Rotary Control Valve (For size 1 to 4 inches) Model VFR OVERVIEW The eccentric rotary control valve, FloWing (model VFR), consists of a straight-through valve body
More informationEccentric Rotary Control Valve (For size 6 to 12 inches)
No. SS2-VFR100-0100 OVERVIEW FloWing Eccentric Rotary Control Valve (For size 6 to 12 inches) Model VFR The eccentric rotary control valve, FloWing (model VFR), consists of a straight-through valve body
More informationModel HIT. Corrosion-Resistant PTFE Body Control Valves OVERVIEW SPECIFICATIONS. No. SS
No. SS2-8193-0200 Corrosion-Resistant Body Control Valves Model HIT OVERVIEW The Corrosion Resistant Body Control Valves (model HIT) are best suited for handling corrosive fluids such as acids and alkali
More informationCage Guided Globe Control Valves
Product 1: Pressure Balanced Cage type Control Valve Size: 1-1/2'', 2, 2-1/2'', 3'', 4'', 5'', 6'', and 8'' (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN100, JIS10K~JIS40K) OVERVIEW The model
More informationCONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change
More informationCV3000 Alphaplus Series Electric Top-Guided Single-Seated Control Valves Model: AGVB / AGVM. User s Manual
CV3000 Alphaplus Series Electric Top-Guided Single-Seated Control Valves Model: AGVB / AGVM User s Manual CM2-AGV300-2001 Copyright, Notices and Trademarks While this information is presented in good faith
More informationData Sheet T EN
Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN
More informationSeries 240 Types PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve
Series 240 Types 3241-1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve ANSI version Application Control valves for PSA plants (Pressure Swing Adsorption) s NPS ½ to 6 Pressure rating
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationCONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION ON-OFF 2,3-WAY GLOBE VALVE YAD-112Q1/11231 Series YAC-31231 Series YAC-31281 Series http://www.proval.co.kr [B-8] GENERAL The single soft seat control valves are designed
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size 15 to 300 Nominal pressure
More informationValve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size
More informationSeries 240 Pneumatic Control Valve Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valve Type 3244-1 Type 3244-7 Three-way Valve Type 3244 with long insulating section circulation inhibitor ANSI version Application Mixing or flow-diverting valve for cryogenic
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationT 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve
T 8053 EN Type 3252-1 and Type 3252-7 Pneumatic Control Valves Type 3252 High-pressure Valve Application Control valve especially designed for controlling low flow rates in process engineering Valve sizes
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure
More informationPNEUMATIC ON OFF GLOBE VALVE
PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:
More informationSeries 110 Globe Control Valves
Series Control Valves Series Globe Control Valves This type of control valve with it s globe body shape, uses the variable area generated within the control valve trim to control fluid flow. Designed in
More informationCV3000 Series Control Valves Model: HCB,HCU,HCN,HPC
OM2-8113-0202 CV3000 Series Control Valves Model: HCB,HCU,HCN,HPC User's Manual NOTICE While this information is presented in good faith and believed to be accurate, Azbil Corporation disclaims the implied
More informationSeries 240 Pneumatic Control Valve Type DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA
Series 240 Pneumatic Control Valve Type 3241-1 DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA ANSI version Application Control valve for PSA plants (Pressure Swing Adsorption) (German: DWA) NPS ½ to 6 Pressure
More informationHoneywell EN REV. 2 09/2014 Page 1 of 10 Specification
Series 9110 Single/Double Seated Globe Valves for ANSI 150-600 DIN/BS 4504 PN10-PN40 Honeywell 70-16-10-05 EN REV. 2 09/2014 Page 1 of 10 Specification Series 9110 Single/Double Seated Globe Valves for
More informationSmart Valve Positioner 700 Series with HART Communication Protocol
No. SS2-AVP702-0100 Smart Valve Positioner 700 Series with HART Communication Protocol OVERVIEW The Smart Valve Positioner 700 Series (model number: AVP7**) not only inherits the reliability of the core
More informationCV3000 Series Control Valves Model: AMT. User s Manual
CM2-AMT100-2001 CV3000 Series Control Valves Model: AMT User s Manual AMT000001000P Copyright, Notices and Trademarks While this information is presented in good faith and believed to be accurate, Azbil
More informationSeries V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Control valves for heat transfer applications using organic media according
More informationSmart Valve Positioner 700 Series with HART Communication Protocol
No. SS2-AVP702-0100 Smart Valve Positioner 700 Series with HART Communication Protocol OVERVIEW The Smart Valve Positioner 700 Series (model number: AVP7**) not only inherits the reliability of the core
More informationSeries V2001 Valves Clean Tech Type 3321CT Globe Valve with pneumatic actuator
Series V2001 Valves Clean Tech Type 3321CT Globe Valve with pneumatic actuator DIN version Application Compact control valve for the process industry Valve size DN 15 to 50 Pressure rating PN 16 to 40
More informationPython 1500 Series Control Valves. Pneumatic and Electric Actuators PYTHON
Python 1500 Series Control Valves Pneumatic and Electric Actuators PYTHON - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing
More informationCV3000 Series Control Valve Model : HLS,HTS,HPS,HLC,HSC,HAV
OM2-8113-0201 CV3000 Series Control Valve Model : HLS,HTS,HPS,HLC,HSC,HAV User's Manual NOTICE While this information is presented in good faith and believed to be accurate,azbil Corporation disclaims
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More informationSeries V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Control valves for heat transfer applications using organic media according to
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More informationEvery component precisely matched
Series 8B Every component precisely matched Powerful valve actuator Most commonly used is the pneumatic multi-spring actuator series MA as shown here. It is robust, ex-proof, features low actuating times,
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationControl Valves for General Applications
Control Valves for General Applications 2 CCI s 8G/8H delivers superior control performance and reliability. The series 8 cage-guided valve is specially designed using recent advancements in control valve
More informationAir Operated Valve Control Valve
Air Operated Valve Control Valve -1 Step 0 Type/Structure/Features Please refer to this for structure and feature of Air Operated Valve and Control Valve. Step 1 Selection Please look at the ID chart to
More information21000 Series. Masoneilan * Valves. High-Performance Control Valves
GE Energy Masoneilan * Valves 21000 Series High-Performance Control Valves Optimum control performance for a wide range of automated process control applications Single-ported design configuration Advanced
More informationSTANDARD SPECIFICATION STRAIGHT THROUGH TYPE BALL- VAVLE 301K SERIES
STANDARD SPECIFICATION STRAIGHT THROUGH TYPE BALL- VAVLE 301K SERIES STANDARD SPECIFICATION BALL VALVE STRAIGHT- THROUGH TYPE 301K SERIES GENERAL The 301K series provides ball valves with a special inner
More informationSeries W&T Pneumatic Control Valve Type RVG Globe valve and angle valve
Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Application Control valve for feedwater and steam applications in power plant engineering and the petrochemical industry Nominal
More informationKOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2" through 6" ( mm). Angle - 1/2" through 2" (15-50 mm).
control valves KOSO HAMMEL DAHL B U L L E T I N G 1 3 0-1 FEATURES Cage-retained quick change seat ring simplifies maintenance. Metal seats for a variety of services and ANSI IV and V shutoff. Soft seat
More informationPYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated
PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...
More informationType and Type Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
More informationINTRODUCTION BODY SUB-ASSEMBLY (FIGURE 1) 2 G X L GLOBE CONTROL VALVE VALTEK SULAMERICANA. Top entry assembly: quick and easy maintenance
globe control valve INTRODUCTION The GXL globe control valve was developed as a simple, lightweight and more economical alternative to the renowned and advanced design of the Valtek Sulamericana GLS globe
More informationMounting and Operating Instructions EB 8111/8112 EN. Valve Series V2001 Globe Valve Type 3321
Valve Series V2001 Globe Valve Type 3321 Fig. 1 Type 3321 Valve with mounted rod-type yoke for pneumatic or electric actuators (partial view) Mounting and Operating Instructions EB 8111/8112 EN Edition
More informationGVER04 GLOBE VALVE. Fundamental Of Engineering Data. Fundamental Of Engineering Data 14.04
GVER04 14.04 GLOBE VALVE Fundamental Of Engineering Data Fundamental Of Engineering Data INDEX 03 04 05 06 07 PRODUT FEATURES MODEL SELECTION GUIDE GLOBE VALVE ASSEMBLY DIMENSION KS/JIS 10K RF, ANSI CL
More informationCeramic Control Valves Model : HIC User's Manual OM
Ceramic Control Valves Model : HIC User's Manual OM2-8193-0300 Copyright, Notices and Trademarks 2013 Azbil Corporation. All Rights Reserved. While this information is presented in good faith and believed
More informationSeries V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Mixing or diverting valves for heat transfer applications using organic media
More informationSeries 250 Pneumatic Control Valve Type and Type High Pressure Valve Type 3252
Series 250 Pneumatic Control Valve Type 3252-1 and Type 3252-7 High Pressure Valve Type 3252 Application Control valve used control small flow rates in process engineering Nominal size G 1 2 1 NPT 1 2
More informationSmart Valve explorer Smart Valve Positioner for Rotary Valve. Model SVX100 / SVX102
No. SS2-SVX100-0100 Smart Valve explorer Smart Valve Positioner for Rotary Valve Model SVX100 / SVX102 OVERVIEW Smart Valve explorer (SVX) models SVX100 and SVX102 are microprocessor-equipped, currentpneumatic
More informationDesign GX Control Valve and Actuator System
Product Bulletin Design GX Control Valve and Actuator System The Fisher Design GX is a compact, state-of-the-art control valve and actuator system, designed to control a wide range of process liquids,
More informationSeries 3500 Control Valves Globe-3-Way Mixing Valves Globe-3-Way Diverting Valves
Product Specification PS100401 2010. 04 Series 3500 Control Valves Globe-3-Way Mixing Valves Globe-3-Way Diverting Valves for promotes more tightness and heavy duty control Series 3500 Control Valves Globe
More informationSeries 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial
More informationSmart Electromagnetic Flowmeter Detector for Sanitary use
MagneW3000 PLUS Smart Electromagnetic Flowmeter Detector for Sanitary use Model MGS28U OVERVIEW The MagneW3000 PLUS Smart Electromagnetic Flowmeter for Sanitary use is a high-performance and highly-reliable
More informationZH series linear actuator control valve. ZHP type Single Seat Series
ZH series linear actuator control valve ZHP type Single Seat Series DATIAN CONTROL VALVE Nowadays with the development of the modernized industrial automatic controlling system progressing, the requirement
More informationSeries 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
More informationSeries V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Mixing or diverting valves for heat transfer applications using organic
More informationFlowPak TM General Application Valve DN , PN 10 / 40
FlowPak TM General Application Valve DN 15 -, PN / SCHERR Application Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and our standard Positioner facililates
More informationWaterMAG. Electromagnetic Flowmeter for Water Applications. Model MCB10A OVERVIEW APPLICATIONS FEATURES. No. SS2-MCB
WaterMAG Electromagnetic Flowmeter for Water Applications OVERVIEW The WaterMAG is an electromagnetic flowmeter for water measurement applications based on field proven Azbil Corporation's technologies.
More informationDirect or Reverse-Acting?
Control Valves Use of Positioners Minimize the effects of friction & hysteresis / reduce dead band. Increase differential pressure capability. Permit split range operation / high rangeability in slow response
More information28000 Series Varipak Control Valves
GE Oil & Gas Technical Specifications 10/2012 Masoneilan * Valves 28000 Series Varipak Control Valves Precise Microflow Valves with Compact Design and Flexible Capabilities Table of Contents Numbering
More informationOp-GL - Globe Control Valve
325 Op-GL - Globe The simple, reliable rugged and economical globe valve A Globe control valve with superior performance Piston-cylinder actuator Easy disassembly, including removal of bonnet and bolts
More informationFisher YD and YS Control Valves
Product Bulletin D100031X012 Fisher YD and YS Control Valves Fisher YD (figure 1) and YS three-way cage-guided valves are designed for throttling or flow-switching (on-off) service, and are available in
More informationSeries A angle pattern control valves
Series A angle pattern control valves AU: Angle pattern-unbalanced top guided AB: Angle pattern-balanced cage guided AM: Angle pattern-omega multi-path & multi-stage Metso's Neles A series angle pattern
More informationFisher GX Control Valve and Actuator System
Product Bulletin D103171X012 GX Control Valve and Actuator Fisher GX Control Valve and Actuator System The Fisher GX is a compact, state-of-the-art control valve and actuator system, designed to control
More informationPython Series Control Valves
Python - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing cost of fuel, delivering media in the most efficient way increases
More informationSERIES 830T THREE WAY VALVE
SERIES 80T THREE WAY VALVE The series 80T three-way valve is designed for diverting service or mixing service applications. A diverting service valve takes common stream and splits it into two outlet ports.
More informationPYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated
PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...
More informationOM Weir-Type Diaphragm Control Valve Model : VDD User s Manual
OM2-8110-0530 Weir-Type Diaphragm Control Valve Model : VDD User s Manual Copyright, Notices and Trademarks 1988-2013 Azbil Corporation. All Rights Reserved. While this information is presented in good
More informationUser s Manual CM2-ALV nd edition
Control Valve Model: ALVB, ALVM ANSI Class 300 or under User s Manual CM2-ALV100-2001 2nd edition Copyright, Notices and Trademarks 2007-2012 Azbil Corporation All Rights Reserved. While this information
More informationJordan Control Valve Series
Jordan Control Valve Series Control Valves A control valve is used to manipulate flowing fluids like, gas, water, steam or process solutions. It compensates for changes in flow or pressure and regulates
More informationT EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve
T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼
More informationMagneW Neo+ Two-wire Electromagnetic Flowmeter Integral type TIIS Explosion-protected Apparatus
MagneW Neo+ Two-wire Electromagnetic Flowmeter Integral type TIIS Explosion-protected Apparatus OVERVIEW The MagneW Neo+ is a high performance two wired electromagnetic flowmeter based on field proven
More informationBOSS Series D Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
More informationOAKLEAF INVESTMENT HOLDINGS 52 (Pty) ltd
REV. 04 04 14 OAKLEAF INVESTMENT HOLDINGS 52 (Pty) ltd is by contract the exclusive import agent and service provider in South Africa for various foreign specialist manufacturers of FIELD PROCESS MEASURING
More informationSeries 2000 Control Valves Globe-Double Seated, Top & Bottom Guide
Product Specification PS100401 2010. 04 Series 2000 Control Valves Globe-ouble Seated, Top & Bottom Guide for promotes more tightness and heavy duty control Series 2000 Single Seated Globe Valve with Model
More informationControl Valve GS 3 series 1/2 up to 10. material
Control Valve 8021 GS 3 series 1/2 up to 10 Pneumatic control valve with integrated positioner for the control of neutral and aggressive fluids. Ideal for steam and flashing liquids. Integral top mount
More informationST3000 Ace Smart Transmitter Sanitary Differential Pressure / Pressure Transmitters
ST3000 Ace Smart Transmitter Sanitary Differential Pressure / Pressure Transmitters Model JTC929A/JTC940A, JTE929A/JTE930A OVERVIEW The Food and beverage industry and fermentation industry require equipment
More informationWYECO. Y-Type Cylinder Actuated Valve. Model WY-C08YT-S
Y-Type Cylinder Actuated Valve Model WY-C08YT-S Model WY-C08YT-F Features Compact, Light weight, High quality High flow capacity Simple design, Easy to assembly Easy to install and maintain All stainless
More informationPneumatic Control Valve Type and Type Micro-flow Valve Type 3510
Pneumatic Control Valve Type 3510-1 and Type 3510-7 Micro-flow Valve Type 3510 ANSI version Application Control valve designed for controlling low flow rates in pilot plants and technical research facilities.
More informationThe series 10 butterfly valves has been developed for a large number of applications throughout process industries. The
Technical Bulletin B-100 Features Series 10 High Performance Feature Butterfly valves For Rating JIS 20K General : The series 10 butterfly valves has been developed for a large number of applications throughout
More informationPARCOL SERIES CONTROL VALVES
PAROL -9 SERIES ONTROL VALVES PAROL -9 SERIES ONTROL VALVES The line of PAROL -9 series control valves provides the most versatile globe body type single seat available with heavy top guiding design.
More information