SALES / CUSTOMER SERVICE: TEMPE, AZ OFFICE: HYPRO SPRAYER PUMPS

Transcription

1 SALES / CUSTOMER SERVICE: TEMPE, AZ OFFICE: HYPRO SPRAYER PUMPS IMPORTANT NOTE: Use cast iron pumps for general spraying. Use Ni-Resist and XL (Silver series) pumps for liquid fertilizers, soil fumigants and insecticides containing phosphates. Repair Kits Include Super Rollers, Viton Seals & O-Ring Gasket. SERIES 6500 (6 ROLLER) SPRAYER PUMP FITS (540 & 1000 RPM PTO SHAFTS) XL Series also ideal for pumping Round Up Super Roller Equipped Along with the 7560, the Series 6500 is one of the most widely used pumps on farms today. It s an economical way to handle: water, herbicides, insecticides, emulsions, aromatic solvents, fertilizer, and wettable powder GPM at 540 RPM GPM at 1000 RPM - Max Pressure 300 PSI - Max Speed 1200 RPM - Max Output 21.8 GPM Repair Kit $55.81 Fimco Mfg. LIst C-A Cast Iron Pump Less Coupler $ N-A Ni-Resist Pump Less Coupler $ *6500C-AR Cast Iron Pump Reverse Rotation $ XL-A Silver Series Pump Less Coupler $ Base Kit (Fits All 6500 Pumps) $ RPM Standard Coupler $ or 1000 RPM Quick Coupler $ RPM Quick Coupler $ RPM Standard Coupler $ RPM Quick Coupler $53.25 *For Use With Gasoline Engine SERIES 7560 (8 ROLLER) SPRAYER PUMP (540 & 1000 RPM PTO SPEEDS) XL Series also ideal for pumping Round Up Super Roller Equipped The Series 7560 offers a variety of choices in materials for rollers, shaft seals and pump housing. The choice reflects your pumping needs: water, herbicides, insecticides, emulsions, aromatic solvents, fertilizer and wettable powder. Heavy duty construction with 15/16 diameter steel shaft. 12 GPM at 540 RPM GPM at 1000 RPM. Max Pressure 300 PSI - Max Speed 1200 RPM Repair Kit $79.72 SERIES 7700 (7 ROLLER) PUMP (MAX. 800 RPM) Super Roller Equipped Plenty of pump for both spraying and agitation 13 G.P.M. at 50 P.S.I. at 540 rpm PTO speed. Designed for wettable powder herbicides and insecticides. Avoids clogging and helps assure a proper and uniform mix. Max. Output to 22.1 GPM - Pressure to 200 PSI. Max. Speed 800 RPM - Temperature to 140 F. Fimco Mfg. LIst C-A Cast Iron Pump Less Coupler $ N-A Ni-Resist Pump Less Coupler $ *7560C-AR-01 Cast Iron Pump Reverse Rotation $ XL-A Silver Series Pump Less Coupler $ Base Kit (Fits All 7560 Pumps) $ RPM Standard Coupler $ or 1000 RPM Quick Coupler $ RPM Quick Coupler $ RPM Standard Coupler $ RPM Quick Coupler $52.00 *For Use With Gasoline Engine C-A Cast Iron Pump Less Coupler $ N-A Ni-Resist Pump Less Coupler $ XL-A Silver Series Pump Less Coupler $ RPM Standard Coupler $ RPM Quick Coupler $47.50 XL Series also ideal for pumping Round Up Repair Kit $74.77 SPECIFICATIONS FOR ROLLER PUMPS SHAFT MAX MAX MAX DIAMETER PORTS ROLLER STANDARD Series GPM PSI RPM HEIGHT STYLE SIZE MATERIAL SEAL LENGTH WIDTH HEIGHT /16 Solid 1-1/2 (F)NPT Super Roller Buna-N 7-11/16 8-3/4 8-1/ /8 15/16 Solid 1 (F)NPT Super Roller Viton 7-23/32 8-1/4 6-7/ /4 5/8 Solid 3/4 (F)NPT Super Roller Viton 5-11/32 4-5/ /4 5/8 Solid 3/4 (F)NPT Super Roller Viton 5-11/32 4-5/ /32 5/8 Solid 3/4 (F)NPT Super Roller Viton 5-11/ / /8 15/16 Solid 3/4 (F)NPT Super Roller Viton 6-13/16 6-5/8 5-15/ /2 15/16 Solid 3/4 (F)NPT Super Roller Viton 6-7/8 6-5/8 6 PUMPS ::

2 79 SALES / CUSTOMER SERVICE: TEMPE, AZ OFFICE: HYPRO SPRAYER PUMPS SERIES 1700 (5 ROLLER) PUMPS (540 & 1000 RPM PTO SPEEDS) Super Roller Equipped The 1700 Series handles a variety of liquids: water, herbicides, insecticides, emulsions, aromatic solvents, fertilizer and wettable powder. Use where moderate flow and pressure is desirable. Output to 45 GPM - Pressure to 200 PSI - Speed to 1000 RPM - Temperature to140 F SERIES 1500 (6 ROLLER) PUMPS (540 & 1000 RPM PTO SPEEDS) Super Roller Equipped Series 1500 adapts to 1-3/8 or 1-3/ RPM PTO shafts as well as 540 RPM. It can be used with a large variety of chemicals. Output to 62 GPM - Pressure to 150 PSI - Speed to 1000 RPM - Temperature to 140 F SERIES 4001/4101 (4 ROLLER) SMALL, DURABLE, LOW-COST PUMPS WITH MANY INDUSTRIAL USES XL Series also ideal for pumping Round Up Repair Kit $75.50 Repair Kit $74.00 Super Roller Equipped Use Series 4001/4101 as a pressure pump for spraying, atomizing or blending insecticides, herbicides, fumigants, etc., or as a transfer pump for water, brine, oils, solvents, and many chemicals, or as a circulating pump for lubricants, coolants, and rinsing solutions. Series 4001, for electric motor drive: Output to 9 GPM - Pressure to 150 PSI- Speed to 1800 RPM - Temperature to 140 F. Series 4101, for gas engine drive: Output to 7 GPM - Pressure to 150 PSI - Speed to 2600 RPM - Temperature to 140 F Repair Kit $ C-A Cast Iron Pump Less Coupler $ N-A Ni-Resist Pump Less Coupler $ XL-A Silver Series Pump Less Coupler $ RPM Standard Coupler $ RPM Quick Coupler $ RPM Standard Coupler $ RPM Quick Coupler $ RPM 1-3/4 Coupler $ C-A Cast Iron Pump Less Coupler $ N-A Ni-Resist Pump Less Coupler $ XL-A Silver Series Pump Less Coupler $ RPM Standard Coupler $ RPM Quick Coupler $ RPM Standard Coupler $ RPM Quick Coupler $ RPM 1-3/4 Coupler $70.50 (The Following Pumps Operate up to 1800 RPM) C-A Cast Iron Pump 5/8 Solid Shaft $ N-A Ni-Resis Pump 5/8 Solid Shaft $ XL-A Silver Series Pump 5/8 Solid Shaft $ (The Following Pumps Operate up to 2600 RPM) C-A Cast Iron Pump 5/8 Solid Shaft $ N-A Ni-Resist Pump 5/8 Solid Shaft $ XL-A Silver Series Pump 5/8 Solid Shaft $ /8 Sleeve Coupler Direct To Engine Mount $ Base Kit For Electric - 3-1/2 Shaft Centerline $ Base Kit For Gas Engine - 4-3/16 Shaft Centerline $39.50 :: PUMPS POWER TAKE OFF COUPLERS Item Fimco Code No. Mfg s Part No. Description List Price Hypro Quick Coupler-Fits 5/8 Shaft (540 or 1000 RPM PTO) $ Hypro Quick Coupler-Fits 5/8 Shaft (540 RPM PTO) $ Hypro Quick Coupler-Fits 15/16 Shaft (540 or 1000 RPM PTO) $ Hypro Quick Coupler-Fits 15/16 Shaft (540 RPM PTO) $ Hypro Quick Coupler-Fits 5/8 Shaft (1000 RPM PTO) $ Hypro Quick Coupler-Fits 15/16 Shaft (1000 RPM PTO) $ Forged Steel Coupler-Fits 15/16 Shaft (540/1000 RPM PTO) $ Forged Steel Coupler-Fits 5/8 Shaft (540/1000 RPM PTO) $ Standard Coupler-Fits 5/8 Shaft (540 RPM PTO) 6 Spline $ Standard Coupler-Fits 15/16 Shaft (540 RPM PTO) $ Standard Coupler-Fits 5/8 Shaft (1000 RPM PTO) 21 Spline $ Standard Coupler-Fits 15/16 Shaft (1000 RPM PTO) $ Standard Coupler-Fits 15/16 Shaft (1-3/ RPM PTO) $ /8 x 5/8 Adapter Kit $ /4 x 5/8 Adapter Kit $ Quick Coupler. Balls Only $1.05

3 SALES / CUSTOMER SERVICE: TEMPE, AZ OFFICE: CENTRIFUGAL PUMPS PTOC PTO DRIVEN CENTRIFUGAL PUMPS FMC-HYD-204 FMC Fimco Code No. Mfg. Model No. Description Wt. List Price PTOC-600-6SP PTOC-600-QC PTOC-600-B PTOC SP PTOC SP PTOC SP PTOC SPQC PTOC SP PTOC SP Cast iron 1-1/4 x 1 straight centrifugal with pulleys and 10 groove belt arranged for direct mounting on 1-3/8 600RPM PTO shaft, 0-70 PSI. Equipped with 6 spline PTO drive shaft. Viton mechanical seal. Fully guarded for operator safety. Cast iron 1 1/4 x 1 straight centrifugal with pulleys and 10 groove belt arranged for direct mounting on 1-3/8 600RPM PTO shaft 0-70 PSI. Equipped with 6 spline quick coupler PTO drive shaft. Viton mechanical seal. Fully guarded for operator safety. Cast iron 1 1/4 x 1 straight centrifugal with pulleys and 10 groove belt. 1 Diameter stub shaft and integral mounting base 600 RPM Tumblerod drive shaft PSI. Equipped with Viton mechanical seal. Fully guarded for operator safety. Cast iron 1 1/4 x 1 straight centrifugal with pulleys and 10 groove belt arranged for direct mounting on 1 3/ RPM PTO shaft PSI. Equipped with 21 spline split PTO drive shaft and split ring locking collar. Viton mechanical seals. Fully guarded for operator safety. Cast iron 1 1/4 x 1 straight centrifugal with pulleys and 10 groove belt arranged for mounting on 1 3/ RPM PTO shaft PSI. Equipped with split PTO drive shaft and split ring locking collar, Viton mechanical seals. Fully guarded for operator safety PSI cast iron straight centrifugal with pulleys and 10 groove belt assembled for mounting on 1-3/8, 600 RPM PTO shaft. Viton mechanical seal. Fully guarded for operator safety PSI cast iron straight centrifugal with pulleys and 10 groove belt assembled for mounting on 1-3/8, 600 RPM PTO Shaft; equipped with Quick Coupler. Viton mechanical seal. Fully guarded for operator safety PSI, cast iron straight centrifugal with pulleys and 10 groove belt assembled for direct mounting on 1-3/ RPM PTO Shaft. Equipped with 21 spline PTO shaft and locking collar. Viton Mechanical seal. Fully guarded for operator safety PSI, cast iron straight centrifugal with pulleys and 10 groove belt assembled for mounting on 1-3/ RPM PTO shaft. Equipped with 20 spline PTO shaft and locking collar. Viton mechanical seal. Fully guarded for operator safety. 45 $1, $1, $1, $1, $1, $1, $1, $1, $1, CENTRIFUGAL PUMPS - TRACTOR HYDRAULIC SYSTEM DRIVEN Cast iron 1 1/4 x 1 frame mounted straight centrifugal pump for tractor hydraulic system applications. Assembled with hydraulic motor equipped with internal check valve to prevent reverse rotation and resulting seal damage. Also equipped with integral needle valve to control input of fluid on open center tractor hydraulic systems and a restrictor orifice to control input of fluid on closed center systems is included with Model FMC-HYD-204. (Models FMC-HYD-210 and FMC-HYD-310 are not equipped with restrictor orifice).to match pump model with tractor hydraulic system capacity, refer to chart below. Models FMC-HYD-204 and FMC-HYD-210 produce PSI at maximum 4600 RPM and 60 GPM at open discharge. Model FMC-HYD-310 produces 0-65 PSI at maximum 3950 RPM and 60 GPM at open discharge. For open center systems which require sprayer pump pressures of from 60 to 100 PSI, pump model FMC-HYD-210 should be selected where the tractor system has a minimum of 8 GPM at 500 PSI available at the remote ports. The New Model No. FMC-150-HYD-206 has 1-1/2 x 1-1/4 ports. Maximum pressure 120 PSI at 5100 RPM at open discharge. 7 GPM hydraulic motor can be used on pressure compensating Closed Center Systems (John Deere Type), Load Sensing Closed Center Systems (Case-IH type), and Open Center Systems Rated 7-16 GPM. Equipped with restrictor Orifice. TRACTOR HYDRAULIC SYSTEM REMOTE OUTLET CAPACITY (GPM) Pressure Compensating Load Sensing Fimco Mfg. CLOSED CENTER CLOSED CENTER OPEN CENTER List Code No. Part No. (John Deere Type) (Case-IH Type) Wt. Price ++ Indicates which Pumps may be used with which Hydraulic Systems FMC HYD GPM 26 $1, FMC HYD GPM 27 $1, FMC HYD GPM 33 $1, FMC-150-HYD GPM 31 $1, FRAME MOUNTED CENTRIFUGAL PUMPS - COUNTER-CLOCKWISE ROTATION FMC-MIA Cast iron 1 1/4 x 1 frame mounted straight centrifugal pump for belt drive application PSI at maximum 4600 RPM, 60 GPM at open discharge. Equipped with Viton mechanical seal. Mounting frame machined for idler arm. 18 $ FMK FMC-MAG Mounting kit for John Deere 1000 RPM front PTO shaft. For use with Ace counterclockwise rotation Models FMC and FMCH, when adapted to John Deere tractor Models 2510, 3010, 4010, 2520, 3020, 4020, and Includes mounting bracket, belts and splined pulley. Cast iron 1 1/4 x 1 frame mounted counterclockwise rotation straight centrifugal pump assembled with 12 volt DC belt driven magnetic clutch PSI at max RPM, 60 GPM at open discharge. Equipped with Viton mechanical seal. 11 $ $1, PUMPS ::

4 81 SALES / CUSTOMER SERVICE: TEMPE, AZ OFFICE: PARTS LIST FOR ACE CENTRIFUGAL PUMPS TRACTOR PTO DRIVEN PUMP REPAIR KITS Includes Belt, VITON Seal, Gaskets & O Ring (RK-PTOC-600) $ for Models PTOC-600-6SP, PTOC-600-QC and PTOC-600-B (RK-PTOC-1000) $ for Models PTOC SP and PTOC SP :: PUMPS Ref. Code No. Part No. Description Reg. Price BAC-4 Gasket, 4 Hole 1 $ BAC-5 Idler Torsion Spring 1 $ BAC-6-SS 5/8 Shaft, L. H. Thread, Stainless (Optional) 1 $ BAC-7B Buna N Seal (Optional) 1 $ BAC-7V VitonSeal 1 $ O Ring For BAC-6 Shaft 1 $ BAC-10-6-SP 1 3/8 6 Spline PTO (For PTOC SP) 1 $ BAC-10-6SP-QC 1 3/8 6 Spline PTO (For PTOC-10-QC) 1 $ BAC-10-21SP 1 3/8 21 Spline PTO (For PTOC SP) 1 $ BAC SP 1 3/4 20 Spline PTO (For PTOC SP 1 $ BAC-10-S 1 Stub Drive Shaft (For PTOC B) 1 $ BAC-11 Locking Collar (For BAC-10-21SP Shaft) 1 $ BAC Locking Collar (For BAC Shaft) 1 $ BAC-11-1 Set Screw (For BAC Locking Collar) 1 $ BAC /4 x 1 Volute 1 $ BAC-13 Idler Arm 1 $ BAC-14-MIA Mounting Frame, Mach. For Idler Arm 1 $ BAC-15 Bearing Housing (For PTO Models) 1 $ BAC15-B Bearing Housing w/base (For PTOC B) 1 $ BAC-26-Valox Impeller Valox, L. H. Thread 1 $ BAC-26-CI Impeller Cast Iron, L. H. Thread (Optional) 1 $ BAC-28-8 Belt, 8 Groove (PTOC-600) (Obsolete) 1 $ BAC-28-8-M Belt, 8 Groove (PTOC-1000) (Obsolete) 1 $ BAC Belt, 10 Groove (PTOC , & 10B) 1 $ BAC M Belt, 10 Groove (PTOC ) 1 $ BAC Pully, 10 Groove 1 $ BAC Pully, 10 Groove (PTOC , & 10B) 1 $ BAC M Pully, 10 Groove (PTOC ) 1 $ BAC Pully, 10 Groove (For PTOC SP) 1 $ BAC-31-1 Ball Bearing, BAC-10 Drive Shaft (792 & up) 2 $ BAC-32 External Snap Ring 2 $ BAC-32-S Spacer 1 $ BAC-33 Internal Snap Ring 2 $ BAC-34 Internal Snap Ring 2 $ BAC-35 External Snap Ring 1 $ BAC-36 External Snap Ring 1 $ BAC-37 Sealed Ball Bearing 2 $ BAC-38-1 Bearing Spacer, For BAC-10 Drive Shaft (792 & up) 1 $ Hex Head Cap Screw 4 $ BAC-40 Slotted Set Screw 3 $ Jam Nut 3 $ BAC-46 5/8 Spacer 1 $ BAC-47 Cap Screw 1 $ BAC-49 Retainer Ring 1 $ BAC-50 Key 1 $ BAC-51 Key 1 $ BAC-52 1/4 Cold Shut Chain Anchor 1 $ BAC-53 1/8 NPT Pipe Plug 3 $ BAC-54 Slinger 1 $ BAC-55 Idler Bearing And Roller Assembly 1 $ BAC-55-A Idler Arm Assembly 1 $ BAC-57 Set Screw 2 $ BAC-58 Zerk Fitting 1 $ Cap Screw 1 $ BAC-63 Self Locking Nut 1 $ Set Screw 2 $ BAC-81-QC Ball Retainer 1 $ BAC-82-QC Spring For Quick Coupler 1 $ BAC-83-QC Ball For Quick Coupler 3 $ BGKB Belt Guard Kit (PTOC-Pumps) 1 $ PUMP MODELS PTOC-600-B PTOC-600-SP PTOC SPQC PTOC SP PTOC SP

5 SALES / CUSTOMER SERVICE: TEMPE, AZ OFFICE: CENTRIFUGAL PUMPS SERIES 9300 HYDRAULIC MOTOR DRIVEN CENTRIFUGAL PUMPS Model Max. Max. List Estimated Number GPM PSI Description Price Shpg. Wt. 9303C-HM1C (10 gpm) hydraulic motor/cast iron pump for open/closed $1, lbs. ( ) center systems, ports (NPT): 1-1/2 Inlet, 1-1/4 Outlet 9303C-HM2C (5 gpm) hydraulic motor/cast iron pump for closed $1, lbs. ( ) center systems, ports (NPT): 1-1/2 inlet, 1-1/4 outlet 9303C-HM3C (20 gpm) hydraulic motor/cast iron pump, Large open $1, lbs. ( ) center systems, ports (NPT): 1-1/2 inlet, 1-1/4 outlet. 9303C-HM4C ( 7 gpm) hydraulic motor/cast iron pump, closed/open $1, lbs. ( ) center systems, ports (NPT): 1-1/2 inlet, 1-1/4 outlet 9306C-HM1C (10 gpm) hydraulic motor/cast iron pump, closed/ open $1, lbs. center systems, ports, (NPT): 2 inlet, 1-1/2 outlet. 9306C-HM3C (20 gpm) hydraulic motor/cast iron pump, large open $1, lbs. center systems, ports (NPT): 2 inlet, 1-1/2 Outlet 9306C-HM5C (17 gpm) hydraulic motor/cast iron pump, closed/open $1, lbs. center systems, ports (NPT): 2 inlet, 1-1/2 outlet Silicon carbide seal is available by special order $ Use suffix letter -B SERIES 9000 GEAR DRIVEN CENTRIFUGAL PUMPS A good pump for handling wettable powder slurries, the 9000 is widely used for high capacity field spraying and liquid transfer. Exclusive, smooth running planetary gear drive. Compact in size fits under the PTO shield. Construction: Cast iron housing. Gears safely enclosed in factory-lubricated case (500 hour lubrication interval). Viton shaft seal standard; Use with 540 or 1000 rpm PTO speeds. Output to 117 GPM - Pressure to 80 PSI. Speed to 1000 RPM - Temperature to 140 F. PORT SIZES: 1-1/2 INLET 1-1/4 OUTLET. WEIGHT: 45 LBS C-O 1-3/8 540 RPM PTO $1, C-O 1-3/ RPM PTO $1, C-O 1-3/ RPM PTO $1, C-O 1 Solid Shaft 1000 RPM $1, SERIES 9400 CAST IRON BELT DRIVEN MODELS WITH 12-GROOVE BELT & IDLER PULLEY Model Max. Max. Max. List Estimated Number GPM PSI RPM Shaft NPT Ports Price Shpg. Wt. 9402C /8 Hollow, 1-1/4 Inlet, 1 Outlet $1, lbs. ( ) 6-Spline 9402C-540Q /8, 6 Spline 1-1/4 Inlet, 1 Outlet $1, lbs. ( ) Quick Coupler 9402C /8 Hollow, 1-1/4 Inlet, 1 Outlet $1, lbs. ( ) 21-Spline 9402C-1000L /4 Hollow, 1-1/4 Inlet, 1 Outlet $1, lbs. ( ) 20-Spline 9403C /8 Hollow 1-1/2 Inlet, 1-1/4 Outlet $1, lbs. 6-Spline 9403C-540Q /8, 6-Spline 1-1/2 Inlet, 1-1/4 Outlet $1, lbs. Quick Coupler 9403C-540S Solid 1-1/2 Inlet, 1-1/4 Outlet $1, lbs. 9403C /8 Hollow 1/2 Inlet, 1-1/4 Outlet $1, lbs. 21-Spline 9403C-1000L /4 Hollow 1-1/2 Inlet, 1-1/4 Outlet $1, lbs. 20-Spline 9403C-1000S Solid 1-1/2 Inlet, 1-1/4 Outlet $1, lbs. PUMPS ::

6 83 SALES / CUSTOMER SERVICE: TEMPE, AZ OFFICE: CENTRIFUGAL PUMPS 9600C HYPRO TURBINE PUMP & PTO ADAPTERS /4 Forged Steel PTO Adapter $ lb /8 Forged Steel PTO Adapter $ lb Torque Arm Kit for 9600C $ lbs Torque Arm Kit for Roller Pumps $ lbs. SERIES 9200 PEDESTAL MODELS 9202C Cast Iron - 5/8 Solid Shaft w/viton Shaft Seal $ lbs. ( ) Ports (NPT): 1-1/4 Inlet, 1 Outlet 9203C Cast-Iron - 5/8 Solid Shaft w/viton Shaft Seal $ lbs ( ) Ports (NPT): 1-1/2 Inlet, 1-1/4 Outlet 9203C-R Cast Iron -with 5/8 solid shaft, counter clockwise $ lbs. ( ) rotation viton seal, and 1-1/2 x 1-1/4 Ports 9206C Cast iron - with 5/8 solid shaft and Viton Seal, $ lbs. ( ) Ports (NPT): 2 Inlet, 1-1/2 Outlet POLYPROPYLENE CENTRIFUGAL PUMPS (GEAR DRIVEN PTO) 9006P-O Gears are safely enclosed in the factory lubricated case. $1, lbs. ( ) It is available in a gear drive for 540 RPM for coupling to standard PTO. 9008P-O Gears are safely enclosed in the factory lubricated case. $1, lbs. ( ) It is available in a gear drive for 1000 RPM for coupling to standard PTO. POLYPROPYLENE CENTRIFUGAL PUMPS (PEDESTAL MOUNTED) 9203P-S The pedestal mounted centrifugal pump is designed for $ lbs. ( ) direct drive with an electric motor or belt and pulley drive with an electric motor or gas engine. It has a 7/8 keyed 316 Stainless Steel Shaft. POLYPROPYLENE CENTRIFUGAL PUMPS (HYDRAULIC MOTOR DRIVEN) :: PUMPS 9303P-HM1C Open / The hydraulic motor features a fixed displacement interna $1, lbs. ( ) Closed gear design for smooth operation. A double lip Teflon shaft 9303P-HM3C Open seal provides excellent reliability even with hydraulic oil $1, lbs. ( ) back pressure. The hardened stainless steel motor/ pump shaft is supported by two needle bearings and a ball 9303P-HM4C Open / bearing for dependable operation through years of use. $1, lbs. ( ) Closed

7 SALES / CUSTOMER SERVICE: TEMPE, AZ OFFICE: HYPRO DIAPHRAGM PUMPS PISTON-DIAPHRAGM PUMPS are ideal for spraying agricultural spray for pest and weed control and liquid fertilizer application. The moving parts are stainless steel hermetically sealed in 100% oil bath and never come in contact with spray liquid. The only moving part of the pump in contact with the spray is the diaphragm which is resistant to most chemicals pumped. Diaphragms and valves can be replaced on the farm without special tools and are easily accessible from the outside of the pumps. Pumps will run dry and with abrasives, they are positive displacement type pumps and self priming. They are light, and have surge chamber attached. Hose connectors are built on the pumps. LOW PRESSURE DIAPHRAGM PUMPS 9910-D Diaphragm Pump $1, lbs D70GR D70GR $1, lbs D Diaphragm Pump $1, lbs D115GR D115GR34 $2, lbs D Diaphragm Pump $1, lbs D Diaphragm Pump $3, lbs D Diaphragm Pump $3, lbs. MEDIUM PRESSURE DIAPHRAGM PUMPS 9910-D Diaphragm Pump $ lbs D252GRGI Diaphragm (Semi-Hydraulic) Pump $1, lbs D252GRGI Diaphragm (Semi-Hydraulic) Pump $1, lbs D252GRGIAP Diaphragm (Seim-Hydraulic) Pump $1, lbs D Diaphragm Pump $1, lbs D30AP-A $1, lbs D30GRGI Diaphragm Pump $1, lbs D30-B-GRGI $1, lbs D Diaphragm Pump $1, lbs D303GRGI Diaphragm Pump $1, lbs D Diaphragm Pump $1, lbs D403GRGI Diaphragm Pump $1, lbs D Diaphragm Pump $1, lbs D50AP-A $1, lbs D Diaphragm Pump $1, lbs D503GRGI Diaphragm Pump $2, lbs D503GRGI Diaphragm Pump $2, lbs. HIGH PRESSURE DIAPHRAGM PUMPS 9910-D Diaphragm Pump $1, lbs D813GRGI Diaphragm Pump $3, lbs D Diaphragm Pump $2, lbs D1064GRGI DiaphragmPump $3, lbs D Diaphragm Pump $3, lbs D Diaphragm Pump $3, lbs DBS Diaphragm Pump $5, lbs PUMPS ::

8 85 SALES / CUSTOMER SERVICE: TEMPE, AZ OFFICE: CONTROL UNITS & SHAFT KITS CONTROL UNITS Model Max. Max. List Shpg. Number GPM PSI Description Price Wt KIT Control unit for Model 9910-D12GRGI. Includes relief valve $ lb. and two 3/8 hose barb outlets KIT Control Unit For Mounting On 9910-D252 Model Pumps. $ lb. Includes Relief Valve And Pressure/Bypass Selector. 5/8 HB Bypass Port And 3/8 HB Outlet GS40GI Control Unit For Mounting On 9910-D30 & 9910-D50 $ lbs. Model Pumps. Includes High Pressure Relief Valve And (3) 1/2 HB Outlets With Individual Shut-Offs KIT Remote Mounting Kit For 9910-GS40GI or 9910-GR40. $ Lb. Control Unit. Includes Mounting Bracket, Bolts & Hose Barb 9910-GR Control Unit For 9910-D303 & D403 Model Pumps Include $ lbs. Adjustable High Pressure Relief Valves, Complete Bypass Lever, 2 1/2 Gauge, Outlet Barbs & 5/8 Bypass Barb 9910-RM Control Unit For 9910-D503 Model Pumps. Includes High $ lbs. Pressure Relief Valve, And Two 1/2 HB Outlets With Individual Shut-Offs. Unit Can Be Either Direct or Remote Mounted GS50GI Remote Control Unit For Mounting On 9910-D813, D1064, $ lbs. D1265, D1516 & D1554 Model Pumps. Includes High Pressure Relief Valve & Three 1/2 HB Outlets With Individual Shut-Offs KIT Remote Mounting Kit For 9910-GS50GI Control Unit. $ lbs. Includes mounting bracket, bolts & Hose Barb BMH Control Unit For DBS110, 140 & 160. $ lbs GH Control Unit For 9910-DBS200. $ lbs. GEAR REDUCTION KITS Model No. Description List Price Shpg Wt. *9910-KIT1640 For Model 9910-D30, D303 & D403 Pumps $ lbs. 6:1 Gear Box for standard 5HP engine w/3/4 shaft 9910-KIT1642 FOR MODEL 9910-D50, D503, D813, D1064 & D1265 PUMPS $ lbs. 6:I Gear Box For Standard 8-18 HP Gas Engine w/1 Shaft *This kit can also be used with 9910-D50, D503 & D813, providing that pumps are operated at lower pressures, that do not exceed 5 HP gas engine capability. 1-3/8-6B FEMALE PTO SHAFT KITS Model No. Description List Price Shpg Wt KIT1704 For Model 9910-D50, D30, D303 & D403 Pumps $ lbs KIT1708 For Model 9910-D70 And Model 9910-D115 Pumps $ lbs KIT2204 For Model 9910-D503 $ lbs. *Kits include female PTO coupler and retaining clamp, torque arm and mounting bracket, chains, and necessary hardware. 1-3/8-6B MALE PTO SHAFT KITS Model No. Description List Price Shpg Wt KIT1702 For Model 9910-D30 Pumps $ lbs KIT1706 For Model 9910-D50 $ lbs KIT1710 For Model 9910-D70 And Model 9910-D115 Pumps $ lbs KIT2200 For Model 9910-D503, D303 & D403 $ lbs KIT2201 For Models 9910-D813, D1064, & D1265 Pumps $ lbs. *Kits include male PTO shaft adapter, mounting bracket, and necessary hardware 1 SOLID SHAFT KITS Model No. Description List Price Shpg Wt. :: PUMPS 9910-KIT1703 For Model 9910-D30 Pumps $ lbs KIT1707 For Model 9910-D50 $ lbs KIT1711 For Model 9910-D70 And Model 9910-D115 Pumps $ lbs KIT2202 For Model 9910-D503, D303 & D403 $ lbs KIT2203 For Models 9910-D813, D1064, & D1265 Pumps $ lbs. *Kits include solid shaft adapter, mounting bracket, and necessary hardware.

9 SALES / CUSTOMER SERVICE: TEMPE, AZ OFFICE: BANJO SELF-PRIMING PUMPS Mfg. Fimco List Part# Part# Description Price Gas Engine Driven Self-Priming Cast Iron Pumps Centrifugal Self- Priming Pump 150PI3 1-1/2 Briggs 3 H.P., Rewind, 100 GPM $1, PI Briggs 3 H.P., Rewind, 160 GPM $1, PI6PRO 2 Briggs 6.5 H.P.,Rewind, 160 GPM $1, PIH Honda 5.5 H.P., 5.5 H.P., Rewind, 160 GPM $2, PIH Honda 8 H.P., Rewind, 200 GPM $4, PIH-11 3 Honda 11 H.P., Electric, 250 GPM $5, Hydraulic Driven Cast Iron Pumps w/hydraulic Motor Hydraulic Driven Cast Iron Pump Cast Iron Pump Pedestal Mounted Cast Iron 150PIHY /2 Hydraulic Driven Cast Pump $2, PIHY 2 Hydraulic Driven Cast Pump $2, PIHY 3 Hydraulic Driven Cast Pump $4, Cast Iron Pump Only (For use w/gas engines-includes bolt package & support Z rails) 150POI /2 Cast Pump Only $ POI Cast Pump Only $ POI Cast Pump Only $1, POI-Pump only is shipped complete and ready for attachment to a gasoline engine Cast Iron Pump Pedestal Mounted (for use with electric motors) 150PBI /2 Cast Pump w/pedestal $1, PBI 2 Cast Pump w/pedestal $1, PBI Cast Pump w/pedestal $1, PBI 4 Cast Iron Pump/Bearing Pedestal With 1 Shaft $3, PBI 4 Cast Iron Pump w/4 Inlet & 3 Outlet/Bearing Pedestal w/1 Shaft $3, PBI 3 Cast Iron Pump/Bearing Pedestal With 1 Shaft $3, PBI-Pedestal pump is easily adaptable to electric power Replacement Engines Only E Briggs 3 H.P. Engine Only $ GX160K1QX Honda 5.5 H.P. Engine Only Call for Price BANJO POLY SELF-PRIMING PUMPS Mfg. Fimco List Part# Part# Description Price Poly Centrifugal Pumps (Gas Engine Pump w/epdm Rubber Parts) 150P3 1-1/2 Briggs 3 H.P., 100 GPM $ P Briggs 3 H.P., 100 GPM $ P6PRO Briggs 6.5 H.P., 160 GPM $1, PH Honda 5.5 H.P., 160 GPM $1, PH Honda 6.5 H.P., 300 GPM $2, Poly Bearing Pedestal Pump (To Adapt To Electric Motor) 150PB /2 Pump w/pedestal 3/4 Shaft $ PB Pump w/pedestal 3/4 Shaft $ PB Pump w/pedestal 3/4 Shaft $1, Poly Pumps w/viton Rubber Parts 150P-3-V /2 Briggs 3 H.P., 100 GPM $1, P-3-V Briggs 3 H.P., 100 GPM $1, P6-PROV 2 Briggs 6 H.P., 160 GPM $1, PH5-V Honda 5.5 H.P., 160 GPM $2, Poly Bearing Pedestal Pump W/Viton Parts 150PB-V /2 w/bearing Pedestal Shaft $ PB-V w/bearing Pedestal Shaft $ Poly Pump Only w/viton Parts 150PO-V /2 Pump Only w/viton Parts $ PO-V Pump Only w/viton Parts $ Poly Self-Priming Pump Poly Pedestal Pump PUMPS ::

10 87 SALES / CUSTOMER SERVICE: TEMPE, AZ OFFICE: BANJO WET SEAL & STAINLESS STEEL PUMPS The new Banjo Wet Seal Pump is equipped with a double seal arrangement where the seal is contained in an ethylene glycol (antifreeze) reservoir. This enables the pump to run dry for short periods of time without damaging the seal. Extended services of the seal substantially adds lift to the pump and engine. Mfg. Fimco List Part# Part# Description Price Wet Seal Self-Priming 316 Stainless Steel Centrifugal Pumps 200PH5-SSW Honda 5.5 H.P., 160 GPM $5, PH-11SSW Honda 11 H.P., 345 GPM $12, Wet Seal 316 Stainless Steel Pump Only 200PO-SSW Stainless Steel Pump Only $3, PO-SSW 3 Stainless Steel Pump Only $7, Wet Seal 316 Stainless Steel Pedestal Pump 200PB-SSW SS Pump w/pedestal $3, PB-SSW SS Pump w/pedestal $7, Wet Seal Self-Priming Cast Iron Centrifugal Pumps 200PI-6W Briggs 6.5 H.P., 160 GPM $2, PIH-5W 2 Honda 5.5 H.P., 160 GPM $2, PIH-11W Honda 11 H.P., 345 GPM $5, Wet Seal Cast Iron Pump Only (For Use w/gas engine) 200POI-W 2 Cast Iron Pump Only $1, POI-W Cast Iron Pump Only $2, Wet Seal Cast Iron Pedestal Pump Only (For Use w/electric Motor) 201PBI-W Cast Iron Pump w/pedestal $1, WET SEAL PUMP FEATURES: Viton double seal contained in ethylene glycol reservoir Sight tube indicator Dynamic balanced impeller All stainless steel hardware Available in 316 stainless steel or cast iron with bearing pedestal, gas engine, or pump only STAINLESS STEEL PUMPS All 316 Stainless Steel Wettable Internal Components: Impeller Wear Plate Sleeve Fasteners :: PUMPS Mfg. Fimco List Part# Part# Description Price Self-Priming 316 Stainless Steel Centrifugal Pumps 200P6PROSS Briggs 6.5 H.P., 160 GPM $4, PH13SS - 3 Honda 13 H.P., 250 GPM $ PH11-SS Honda 11 H.P., 250 GPM $11, Hydraulic Driven 316 Stainless Steel Pumps 200PHYSS Hydraulic Driven SS Pump $5, PHYSS Hydraulic Driven SS Pump $8, Stainless Steel Pump Only (For Use w/gas Engine) 200PO-SS Stainless Steel Pump Only $3, PO-SS Stainless Steel Pump Only $5, Stainless Steel Pedestal Pumps (For Use w/electric Motor) 200PB-SS Stainless Steel w/pedestal $3, PB-SS Stainless Steel w/pedestal $5,925.97