Switchgear Type 8DH10 up to 24 kv, Gas-Insulated, Extendable

Size: px
Start display at page:

Download "Switchgear Type 8DH10 up to 24 kv, Gas-Insulated, Extendable"

Transcription

1 Switchgear Type DH0 up to kv, Gas-Insulated, Extendable Medium-Voltage Switchgear Catalog HA. 00 Answers for energy.

2 Contents Application, Requirements Features Application, Requirements Page Features, typical uses and Technical Data Electrical data, filling pressure, temperature and 5 Switchgear installation, shipping data 6 and Product Range Product range overview to 5 Design Panel design 6 and Components AH vacuum circuit-breaker and 9 Three-position switch-disconnector 0 Busbars Transformers to Cable connection Low-voltage equipment 9 Dimensions Individual panels, panel blocks 0 to Metering panel combinations and 5 Floor openings and fixing points 6 to 9 Cable connection examples 0 Standards, Transport, Notes Standards, specifications, guidelines Transport data, classification Notes For further information, please refer to Catalog HA 0.: (Switchgear Type DJ and DH, General Part) Supplements to Catalogs HA 5./. The products and systems described in this catalog are manufactured and sold according to certified quality and enviromental management system (acc. ISO 900 and ISO 00). (DQS Certificate Reg. No. DQS 00 QM UM). The certificate is accepted in all IQNet countries. DH0 switchgear is a factoryassembled, type-tested, three-pole, metal-enclosed, metal-clad singlebusbar switchgear for in-door installation: Up to kv Feeder currents up to 60 A Busbar currents up to 50 A Typical uses DH0 switchgear is used even under severe environmental conditions for power distribution in secondary distribution systems, such as Substations, customer transfer substations, distribution substations and switching substations of power supply and public utilities Industrial plants, such as: Wind power stations High-rise buildings Airports Lignite open-cast mines Underground railway stations Sewage treatment plants Port facilities Traction power supply systems Automobile industry Petroleum industry Chemical industry Cement industry Unit-type heating power stations Textile, paper and food industry Emergency power supply installations Modular design Individual panels and panel blocks can be freely combined andextendedwithoutgas work on site Low-voltage compartments can be supplied in two overall heights and are wired to the panel by means of plug-in connections Reliability Type and routine-tested Standardized and manufactured using numerically controlled machines More than,000 DJ/DH panels in operation worldwide for many years Quality and environment Quality and environmental management system acc. to DIN EN ISO 900 and DIN EN ISO 00 Personal safety Safe-to-touch and hermetically sealed primary enclosure HV HRC fuses and cable sealing ends are only accessible when outgoing feeders are earthed Operation only possible when enclosure is closed Logical mechanical interlocking Capacitive voltage detecting system to verify safe isolation from supply Feeder earthing by means of make-proof earthing switches Security of operation Hermetically sealed primary enclosure independent of environmental effects (such as pollution, humidity and small animals) sealed for life: Welded switchgear vessel Welded-in bushings and operating mechanism Operating mechanism parts maintenance-free (IEC 6- / VDE 06-) Operating mechanisms of switching devices located outside the switchgear vessel (primary enclosure) Switchgear interlocking system with logical mechanical interlocks Mechanical switch-position indicators integrated in the mimic diagram Cost-efficiency Extremely low life-cycle costs throughout the entire product service life as a result of: Maintenance-free concept Climatic independence Minimum space requirements Maximum availability Security of investment Innovative developments, such as: Modular design Switchgear extension without gas work on site Maintenance-free AH vacuum circuit-breaker SIPROTEC protection device family Siemens AG 00 Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

3 R-HA-0 eps R-HA-05 eps R-HA-0a eps Application Typical uses Technology Maintenance-free Climate-independent Partition class: Class PM (metallic partition) Three-pole primary enclosure, metal-enclosed Insulating gas SF 6 Welded switchgear vessel without seals, made of stainless steel, with welded-in bushings for electrical connections and mechanical components Three-position switch-disconnector with load-break and make-proof earthing function Cable connection for bushings with outside cone Connection with cable plugs In ring-main feeders and circuit-breaker feeders with bolted contact (M6) In feeders with plug-in contact Option: Connection with conventional cable sealing ends For thermoplastic-insulated cables via elbow adapter AKE 0 / 60 (make Siemens) For paper-insulated massimpregnated cables via commercially available adapter systems Easy installation Option: Pressure absorber system Maintenance-free For rated short-time withstand current I k 0 ka For single and multi-panel combinations of 00 mm to 000 mm width (for panel type ME with max. adjacent panel) With 00 mm high pressure absorber duct below the switchgear and With 5 mm deep pressure absorber duct for pressure relief upwards Withscrewed-oncable compartment cover Possible for switchgear with standard cable compartment cover Option: Deeper cable compartment cover: 05 or 00 mm For overall height of switchgear, seepage6 Option: Free-standing arrangement, for overall height of switchgear 00 mm and with rear cover For further information concerning thepressureabsorbersystem, please refer to page 9 and to Catalog HA 0. Standards Seepage Example Customer transfer switchgear Application Customer transfer substation in an accessible switchgear building (s, medium-voltage and low-voltage in a factory-assembled building) Application Power supply of high-rise buildings Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

4 Technical Data Electrical data Common electrical data Filling pressure, temperature, partition class and classification Rated insulation level Rated voltage U r kv. 5.5 B) Rated short-dur. power-freq. withstand voltage U d : phase-to-phase, phase-to-earth, open contact gap kv across the isolating distance kv Rated lightning impulse withstand voltage U p : phase-to-phase, phase-to-earth, open contact gap kv across the isolating distance kv ) 6 ) 9 5 ) 5 ) 95 0 Rated frequency f r 50/60 Hz Rated normal current I ) r for busbar (standard) up to A forbusbar()* ) A Rated filling level p re for insulation 50 kpa (absolute) at 0 C Min. functional level p me for insulation 0 kpa (absolute) at 0 C Ambient air temperature T ) Panels without secondary equipment Class Minus 5 indoor (-5 to +0 C ) ) Panels with secondary equipment, Class Minus 5 indoor (-5 to +55 C ) ) circuit-breaker panels Partition class Class PM (metallic partition) Loss of service LSC (loss of service continuity) LSC continuity category 5) B) Panel data Ring-main panel Rated normal current I ) r for feeder (for panel types RK... and K...) A 00, 60 00, 60 00, 60 00, 60 00, 60 type RK, for bus sectionalizer panel type LT A 00, 60 00, 60 00, 60 00, 60 00, 60 bus sectionalizer Rated short-time for switchgear with t panel type LT, k = s up to ka withstand current I cable panel k for switchgear with t k = s () up to ka type K Rated peak withstand current I p up to ka Rated short-circuit making current I ma up to ka Transformer panel type TR Rated normal current I ) r for feeder 6) A Rated short-time for switchgear with t k = s up to ka withstand current I k for switchgear with t k = s up to ka Rated peak withstand current I 6) p up to ka Rated short-circuit making current I 6) ma up to ka Reference dimension e of the HV HRC fuse links mm 9 ) 9 Circuit-breaker panel type LS, bus sectionalizer type LK/LT Rated normal current I ) r for feeder (for panel types LS...) A 00, 60 00, 60 00, 60 00, 60 00, 60 for bus sectionalizer panel type LT A 00, 60 00, 60 00, 60 00, 60 00, 60 Rated short-time for switchgear with t k = s up to ka withstand current I k for switchgear with t k = s up to ka Rated peak withstand current I p up to ka Rated short-circuit making current I ma up to ka Rated short-circuit breaking current I ) sc up to ka Electrical service life of at rated normal current operating cycles AH vacuum circuit-breakers at rated short-circuit breaking current 50 breaking operations *) Not for billing metering panels type ME B) Data for Russian Federation: Rated voltage kv Rated Short-duration powerfrequency withstand voltage kv ) According to some national requirements, higher values of the rated short-duration power-frequency withstand voltage available for I k =0kAwith: kv for phase-to-phase, phase-to-earth and open contact gap as well as kv across the isolating distance Higher values of the rated lighting impulse withstand voltage (for I k =0kA): 95 kv for phase-to-phase, phase-to-earth and open contact gap as well as 0 kv across the isolating distance ) The rated normal currents apply to ambient air temperatures of max. 0 C. The -hour mean value is max. 5 C (according to IEC 6- / VDE 06-) ) Operating conditions according to IEC For application, see also pages and (climate and ambient conditions) ) Temperature range, reduced normal currents at ambient air temperatures > +0 C 5) Classification according to IEC 6-00 (see also page ) 6) Depending on the HV HRC fuse link, observe the max. let-through current of the HV HRC fuse links ) Extension tube (50 mm long) required additionally for fuse mounting mm ) For the AH vacuum circuit-breaker Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

5 Technical Data Electrical data Common electrical data Filling pressure, temperature, partition class and classification Rated insulation level Rated voltage U r kv. 5.5 B) Rated short-dur. power-freq. withstand voltage U d : phase-to-phase, phase-to-earth, open contact gap kv across the isolating distance kv Rated lightning impulse withstand voltage U p : phase-to-phase, phase-to-earth, open contact gap kv across the isolating distance kv ) 6 ) 9 5 ) 5 ) 95 0 Rated frequency f r 50/60 Hz Rated normal current I ) r for busbar (standard) up to A forbusbar()* ) A Rated filling level p re for insulation 50 kpa (absolute) at 0 C Min. functional level p me for insulation 0 kpa (absolute) at 0 C Ambient air temperature T ) Panels without secondary equipment Class Minus 5 indoor (-5 to +0 C ) ) Panels with secondary equipment, Class Minus 5 indoor (-5 to +55 C ) ) circuit-breaker panels Partition class Class PM (metallic partition) Loss of service LSC (loss of service continuity) LSC continuity category 5) B) Panel data Busbar earthing panel type SE, busbar voltage metering panel type MSV/ME Rated short-time for switchgear with t k = s up to ka withstand current I k for switchgear with t k =s() uptoka Rated peak withstand current I p up to ka Rated short-circuit making current I ma up to ka Billing metering panels types ME and ME Rated normal current I ) r for transfer up to A for feeder (T with cable panel as type ME-K) up to A for busbar metering up to A Rated short-time for switchgear with t k =s uptoka withstand current I k for switchgear with t k = s up to ka Rated peak withstand current I p up to ka *) Not for billing metering panels type ME B) Data for Russian Federation: Rated voltage kv Rated Short-duration powerfrequency withstand voltage kv ) According to some national requirements, higher values of the rated short-duration power-frequency withstand voltage available for I k =0kAwith: kv for phase-to-phase, phase-to-earth and open contact gap as well as kv across the isolating distance Higher values of the rated lighting impulse withstand voltage (for I k =0kA): 95 kv for phase-to-phase, phase-to-earth and open contact gap as well as 0 kv across the isolating distance ) The rated normal currents apply to ambient air temperatures of max. 0 C. The -hour mean value is max. 5 C (according to IEC 6- / VDE 06-) ) Operating conditions according to IEC For application, see also pages and (climate and ambient conditions) ) Temperature range, reduced normal currents at ambient air temperatures > +0 C 5) Classification according to IEC 6-00 (see also page ) Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00 5

6 Technical Data Switchgear installation Room planning Switchgear installation Wall-standing arrangement Single row Double row (for face-to-face arrangement) Option: Free-standing arrangement For room planning and switchgear installation, please note: Floor openings: Dimensions see pages 6 to 9 Direction of pressure relief acc. to serial no. Respective pressure relief rooms 000 Switchgear installation with standard panels Switchgear room 00 ³000 ³000 ³000 ³00** * Switchgear installation with rear-side pressure absorber duct () Switchgear room * *** 90 ³000 ³00** 5 Room dimensions see opposite dimension drawings Door dimensions The door dimensions depend on the Numberofpanelsina transport unit Design with or without low-voltage compartment Cable basement Side view ³5 > Side view ³5 Cable basement ~ Switchgear fastening For floor openings and fixing points of the switchgear, see pages 6 to 9 Foundations: Steel structure Steel-reinforced concrete 0 ³ Panel dimensions see p. 0 to Weight For details, please refer to page. 0 * Switchgear height for version with pressure absorber duct: For wall-standing arrangement W 950 mm (panel combination without metering panel ME) W 00 mm (for combination with metering panel ME) For free-standing arrangement W 00 mm (high end walls, rear wall and front covers, al low-voltage compartment) ** Installation conditions for internal arc classification acc. to IEC 6-00 *** Height of pressure absorber duct 00 mm with: Wall-standing arrangement with metering panel ME Free-standing arrangement for all panel types B Depending on national specifications: For extension/panel replacement: Control aisle W 000 mm recommended (for Germany W 00 mm) HA-6g eps Top view 0 ³50 Relief opening Opening (e.g. for ventilation as ) Room height Panel depth of the standard panel (may be 5 mm deeper for free-standing arrangement, depending on the panel design) 5 Control aisle B 6 Panel depth of panels with deep cable compartment cover Deep cable compartment cover Standard cable compartment cover Top view 9 Foundation 0 nd cable for connection with of double T-plugs in conjunction with larger floor opening and design with deep cable compartment cover Height of the cable basement corresponding to the cable bending radius Cable Direction of pressure relief Floor openings: Dimensions see pages to 5 Option: Pressure absorber duct 6 Base height of the pressure absorber duct beneath the panel HA-h eps Depth of the pressure absorber duct behind the panel Wall distance 9 End wall 0 Panel width Width of the pressure absorber duct 00 mm for panel combinations Approx. 50 mm for metering panels type ME Standard: Low-voltage compartment for circuit-breaker panels Option: Low-voltagecompartment forallotherpaneltypesor Frontcover Relief outlet 6 Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

7 Technical Data Shipping data Individual panel, panel block or combinations thereof for standard switchgear (without pressure relief duct) Type Short identification B current in future Panel or panel combination Width B mm Net weight ) approx. kg without / with LVC */LVC* Transport unit (including packing) for standard panels (without pressure absorber system) Width B m Height Depth m T m without /with LVC */LVC* Volume Gross weight ) m approx. kg without /with without /with LVC */LVC* LVC */LVC* Transport of individual panels Ring-main panel (standard) RK RK / /.0.0. /.69 0 / 0 RK RK 0 / /.0.0. /.69 0 / 00 RK RKV 00 / /.0.0. / / 0 Cable panel (standard) K K 50 5 / /.0.0. / / 65 Transformer panel TR TR 0 / /.0.0. /.69 0 / 00 Circuit-breaker panel (standard) LS LS / /.0.0 /.69 / 0 LS LSV / /.0.0 /.69 / 0 Circuit-breaker panel BB LST LST 0 / /.0.0. /.69 0 / 0 Bus sectionalizer panel with circuit-breaker LT LK / /.0.0 /.69 / 0 LT-V LK V / /.0.0 /.69 / 0 Bus sectionalizer panel with switch-disconnector LT LT 50 / /.0.0. /.69 0 / 0 Busbar earthing panel SE SE / /.0.0. /.69 0 / 0 with voltage SE SEV 50 / /.0.0. /.69 0 / 0 Busbar voltage metering panel ME MSV 50 / /.0.0. /.69 0 / 0 Billing metering with cast-resin ME ME / / /.6 0 / 0 panels, insulated s air-insulated ** with combined s ME ME / / /.6 50 / 50 Transport of panel blocks Ring-main panel block R-B R-B / / /.0.60 / /.6.6 /.0 0 / 60 0 / 650 Transformer panel block T-B T-B / 0 0 / /.0.60 / /.0.5 /.9 90 / / 0 Ring-main/ panel block RT-B RT-B RT-B / 0 50 / / /.0.60 /.0.60 / /.6.6 /.0.5 /.9 60 / 0 50 / / 900 Cable connection/ panel block KT-B / / /.6 60 / 0 Transport of combinations of different individual panels or panel blocks Comprising a number of individual panels or panelblockor a number of panel blocks or individual panels with panel blocks B Short identifications of the panels have been harmonized BB Panel type LST: Please refer to separate Catalog HA 5./., Supplements to Catalogs HA 5./. Overall width B B T 50 mm.0.60 / /.6 ) + 60*** 00 mm.0.60 / /.9 ) + 0*** 00 mm.0.60 / /.9 ) + 5*** 50 mm.5.60 / / 6. ) +00*** Transport units for shipping (top view) With individual panel or panel block With combinations of different individual panels and/or panel blocks (: Panels bolted together and busbars mounted) T = Depth of individual panel or of panel block Individual panel or panel block, dimension B x T Transport unit, dimension B x T B = Overall width of combination of different individual panels or panel blocks 5 B = Width of the transport unit ) The net weight and the gross weight depend on the extent to which they are equipped (e.g. with current s, motor operating mechanism, deep cable compartment cover) and are therefore given as mean value ) Sum of the net weights of individual panels and / or panel blocks * Low-voltage compartment, 600 mm high, weight approx. 60 kg depending on the panel type and on the extent to which it is equipped ** The weights depend on the weights of the mounted s *** Packing weight Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

8 Product Range Product range overview Designation of the individual panels and panel blocks Panel width Type Short identifications * current in future Individual panels Column no. Ring-main panel 50 RK RK RK RK RK RKV 50 RK-U RK-U RK-U RK-U RK-U RKV-U Cable panel without earthing switch 50 K K 50 K-U K-U Cable panel with make-proof earthing switch 50 K K 50 K-U K-U Transformer panel TR TR TR-U TR-U Transformer panel with plug-in voltage s TR-V TR-V TR/V TR/V Circuit-breaker panel LS LS LS-U LS-U Circuit-breaker panel with plug-in busbar voltage s LS LSV LS-U LSV-U Circuit-breaker panel (with disconnecting circuit-breaker) BB LST LST Bus sectionalizer (with vacuum circuit-breaker) LT LK LT-V LKV Bus sectionalizer (with switch-disconnector) LT LT Busbar earthing panel 50 SE SE SE SEV Busbar voltage metering panel ME MSV Legend for pages and 9 * Short identifications of the panels have been harmonized ** LVterminalsasanintheLV compartment (compartment to be ordered as an ) B Three-position switch as three-position switch-disconnector (switch-disconnector CLOSED-OPEN-EARTHED) BB Three-position switch as three-position circuit-breaker (disconnecting circuit-breaker CLOSED-OPEN-EARTHED), see Supplements to Catalogs HA 5./.-00 ) The equipment applies to the entire panel block, but it is located in the first feeder panel from the left ) Low-voltage terminals arranged in thelow-voltagenicheofthe ring-main or cable feeder Billing metering panel 50 ME ME 50 ME-K ME-K Billing metering panel for busbar connection 50 ME-S ME-S cable connection 50 ME-KS ME-K Billing metering panel with combined s 600 ME ME Panel blocks Ring-main panel block 00 R-B 050 R-B Transformer panel block 000 T-B T-B Ring-main/ panel block 00 RT-B Cable connection/ panel block (cable panel without make-proof earthing switch) Cable connection/ panel block (cable panel with make-proof earthing switch) Column no. 050 RT-B 00 RT-B 00 KT-B 00 KT-B RK T RK T RK T K T K T Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

9 Product Range Equipment features Basic equipment Additional equipment (), further additional equipment on request Not available Low-voltage niche as terminal comp. above the operating mechanism box Low-voltage terminals in the operating mechanism box ** Separate low-voltage niche as terminal compartment Release as shunt release for three-position switch B) and BB) Manual operating mechanism for three-position switch B) Manual operating mechanism for three-position circuit-breaker BB) Interlock for cable compartment cover Cable compartment cover locked in place/screwed on C-rail as cable bracket Locking device for three-position switch B) and BB) Short-circuit or earth-fault indicator Mechan. ready-for-service indicator (e.g. for switching devices) Signalling switch ( NO) for remote electrical ready-for-service indication Aux. switch for three-position switch B) and BB) : Switch-disconnector CLOSED/ OPEN: NO + NC, EARTHING CLOSED/OPEN: NO + NC; circuit-breaker type LST CLOSED/OPEN: NO + NC, EARTHING CLOSED/OPEN: NO + NC Motor-operat. mechan. f. three-pos. switch B) and BB) (f. CLOSED and OPEN) Interlock in circuit-breaker panel between three-position switch B) and vacuum circuit-breaker De-earthing lock-out for make-proof earthing switch of three-position switch B) and BB) Closing lock-out for three-position switch B) and BB) Motor operating mechanism for AH vacuum circuit-breaker Release as current- operated release Low-voltage compartment ** ) Low-voltage cover Mounted cable clamps Secondary equipment ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00 9

10 Product Range Ring-main, cable and panels as individual panels HA-_d eps Ring-main panels as feeder panels Type RK 50 mm wide HA-_d eps Cable panels as feeder panels Type K 50 mm wide HA-_d eps Transformer panels as feeder panels Type TR Three-position switch-disconnector Type RK ) ) HV HRC fuse Option: Type RK V ) ) ) Capacitive voltage detecting system HA-_e eps Type RK * 50 mm wide for nd cable* HA-9_e eps Type K * 50 mm wide for nd cable * HA-_d eps Type TR-V B with plug-in voltage s ** Cable-type current ** ** MT plug-in voltage at the cable connection HA-5_d eps HA-6_d eps HA-_d eps Type RK * 50 mm wide with plug-in surge arresters * as transfer panels as transfer panels as transfer panels Type RK-U 50 mm wide for transfer to the right Option: Type RK-U ) Type RKV-U ) ) Type RK-U 50 mm wide for transfer to the left Option: Type RK-U ) Type RKV-U ) ) HA-0_d eps HA-_d eps HA-_d eps Type K * 50 mm wide with plug-in surge arresters * Type K-U 50 mm wide for transfer to the right Type K-U 50 mm wide for transfer to the left HA-_d eps HA-6_d eps HA-5_d eps Type TR-V B (05 mm deeper cable compartment cover) with plug-in voltage s instead of cable connection Type TR-U for transfer to the right Type TR-U for transfer to the left HA-e eps MT plug-in voltage at the connection Cable (not included in the scope of supply) nd cable (not included in the scope of supply) Plug-in surge arrester Make-proof earthing switch Footnotes seepage 0 Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

11 Product Range Ring-main, cable and panels in panel blocks BB HA-_d eps HA-9_c eps Ring-main panel blocks Designs and s for each panel, see page 0 RK RK RK RK Type R-B 00 mm wide consisting of ring-main panels RK Type R-B 050 mm wide consisting of ring-main panels HA-_c eps HA-_d eps Ring-main/ panel blocks Designs and s for each panel, see page 0 RK RK TR c RK Type RT-B 00 mm wide consisting of ring-main panel and panel TR c Type RT-B 050 mm wide consisting of ring-main panels and panel Three-position switch-disconnector HV HRC fuse Capacitive voltage detecting system BB Capacitive voltage detecting system at thebusbarof the panel blocks: Only located onceinthe firstpanelof the block! HA-e eps Cable (not included in the scope of supply) HA-0_c eps Transformer panel blocks Designs and s for each panel, see page 0 TR TR Type T-B 000 mm wide consisting of panels HA-_c eps RK TR c RK RK Type RT-B 00 mm wide consisting of ring-main panels and panel HA-_c eps TR TR TR Type T-B consisting of panels Designs Busbar connection system for connection of individual panels or panel blocks: Arranged in the left-hand panel of the panel block (therefore extendable at a later date) Only either the left-hand or the right-hand panel of the panel block can be designed as a transfer panel with busbar connection Panel blocks are also available without a busbar connection system (extendable at a later date only via the cable feeder) HA-5_e eps Cable connection/ panel block Designs and s for each panel, see page 0 K Designs TR c Type KT-B 00 mm wide consisting of cable connection panel panel Busbar connection system for connection of individual panels or panel blocks: Arranged in the left-hand panel of the panel block (therefore extendable at a later date) Only either the left-hand or the right-hand panel of the panel block can be designed as a transfer panel with busbar connection Panel blocks are also available without a busbar connection system (extendable at a later date only via the cable feeder) c A plug-in voltage cannot be provided at the connection Footnotes from page 0 B Deep cable compartment cover required * Depending on the make/type of the cable plug or arrester: Deep cable compartment cover required ** Cable-type current on the nd cable: For 00 mm deeper cable compartment cover ) Suitable for voltage type MT ) Suitable for voltage type MT ) Suitable for three-phase current s Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

12 Product Range Circuit-breaker panels as individual panels BB Circuit-breaker panels as feeder panels Circuit-breaker panels with plug-in busbar voltage s as feeder panels Vacuum circuit-breaker HA-6_e eps ) HA-_e eps ) HA-_e eps ) HA-_e eps ) Three-position switch-disconnector ** ) Type LS Basic panel ) Type LS * for nd cable * ) Type LSV/LS Basic panel ) ** Type LS * for nd cable * Capacitive voltage detecting system ) MC6... threephase current HA-_d eps ) HA-9_d eps ) HA- _d eps ) HA-5_d eps ) ) Cable-type current on the cable ) ) ) ) MT plug-in voltage at the cable connection Type LS * with plug-in surge arresters or limiters * Type LS B with plug-in voltage s B Type LSV/LS * with plug-in surge arresters or limiters * Type LSV/LS B with plug-in voltage s B MT plug-in voltage at the busbar HA-0_d eps as transfer panels ) Type LS-U for transfer to the right HA-6_d eps as transfer panels ) Type LSV-U/LS-U for transfer to the right Cable (not included in the scope of supply) nd cable (not included in the scope of supply) HA-e eps Plug-in surge arrester or limiter HA-_d eps ) Type LS-U for transfer to the left HA-_d eps ) Type LSV-U/LS-U for transfer to the left Footnotes seepage Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

13 Product Range Bus sectionalizer with circuit-breaker, bus sectionalizer with switch-disconnector, busbar earthing panels and busbar voltage metering panel as individual panels BB Bus sectionalizer with circuit-breaker Busbar earthing panels Busbar voltage metering panel Vacuum circuit-breaker HA-_c eps HA-5_b eps HA-5_c eps Three-position switch-disconnector Capacitive voltage detecting system Type LK/LT with vacuum circuit-breaker Type SE 50 mm wide Type MSV/ME Cable-type current on the screened busbar HA-50_c eps HA-9_e eps Type LKV/LT-V with vacuum circuit-breaker and plug-in voltage s Bus sectionalizer with switch-disconnector Type LT HA-5_c eps Type SEV/SE with plug-in voltage s HA-e eps Make-proof earthing switch MT plug-in voltage at the connection MT plug-in voltage at the busbar Footnotes from page and B Deep cable compartment cover required BB Short identifications of the panels have been harmonized * Depending on the make/type of the cable plug or arrester: Deep cable compartment cover required ** Cable-type current on the nd cable: For 00 mm deeper cable compartment Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

14 Product Range Air-insulated metering panels as transfer panels HA-5_c eps Billing metering panels (standard) P P ) HA-6_b eps Billing metering panels as end panels, for cable connection P P HA-66_c eps Billing metering panels for busbar connection P P Current, cast-resin insulated ) Voltage, cast-resin insulated or on request: Scheme Scheme Scheme Voltage, cast-resin insulated, with HV HRC fuse Type ME, 50 mm wide for transfer to the right Type ME-K, 50 mm wide for transfer to the right Type ME-S, 50 mm wide forbusbarmetering Voltage, cast-resin insulated HA-59_c eps P P Scheme ) HA-6_b eps P P Scheme HA-6_c eps P Scheme P HA-d eps Fixed earthing points for busbar earthing Cable (not included in the scope of supply) HA-60_c eps Type ME, 50 mm wide for transfer to the right, terminals interchanged P ) HA-6_b eps Type ME-K, 50 mm wide for transfer to the right, terminals interchanged P HA-6_a eps Type ME-S, 50 mm wide forbusbarmetering, terminals interchanged P P P and P are terminal designations of the current P P Scheme Scheme Scheme Type ME, 50 mm wide for transfer to the right Type ME-K, 50 mm wide for transfer to the right Type ME-S, 50 mm wide for busbar metering, terminals interchanged HA-6_c eps P P ) HA-65_b eps P P HA-_a eps P P Scheme Scheme Scheme Type ME, 50 mm wide for transfer to the right, terminals interchanged Type ME-K, 50 mm wide for transfer to the right, terminals interchanged Type ME-S, 50 mm wide for busbar metering, terminals interchanged Note Schemes to also feasible for transfer to the left Note Schemes to also feasible for transfer to the left Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

15 Product Range Air-insulated metering panels as transfer panels HA-6_e eps Billing metering panels as end panels, for cable connection P P HA-a eps Billing metering panels as individual panels, for cable connection P P Billing metering panels * with metal-enclosed combined s HA-6_d eps P ) P ) Current, cast-resin insulated ) Voltage, cast-resin insulated or on request: Scheme ) Scheme ) Scheme Voltage, cast-resin insulated, with HV HRC fuses Type ME-KS, 50 mm wide for transfer to the right Type ME-KK, 50 mm wide for cable connection Type ME, 600 mm wide for transfer to the right MK plug-in combined current, metal-enclosed HA-69_e eps ) P P HA-a eps ) P P HA-_d eps P ) P ) ) MK plug-in combined voltage, metal-enclosed HA-0_e eps Scheme Type ME-KS, 50 mm wide for transfer to the right, terminals interchanged ) P P HA-5a eps Scheme Type ME-KK, 50 mm wide for cable connection, terminals interchanged ) P P HA-_b eps Scheme Type ME, 600 mm wide for transfer to the right, terminals interchanged P ) P ) HA-e eps Fixed earthing points for busbar earthing Cable (not included in the scope of supply) P and P are terminal designations of the current Scheme Scheme Scheme Type ME-KS, 50 mm wide for transfer to the right Type ME-KK, 50 mm wide for cable connection Type ME, 600 mm wide for transfer to the left HA-_e eps P P HA-6a eps P P HA-9_b eps P P ) ) ) ) Scheme Type ME-KS, 50 mm wide for transfer to the right, terminals interchanged Scheme Type ME-KK, 50 mm wide for cable connection, terminals interchanged Scheme Type ME, 600 mm wide for transfer to the left, terminals interchanged Note Schemes to also feasible as left-hand end panel for transfer to the left * Mainly for connection to bus sectionalizer with switch-disconnector LT, LT-V and LT Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00 5

16 Design Panel design (examples) Ring-main panel Section Transformer panel Section HA-9e eps HA-0d eps Type RK Type TR HA-e eps Billing metering panel, air-insulated 6 Section 6 Legend for pages 6 and Option: Low-voltage compartment Niche for customer-side low-voltage equipment, with hinged cover Switch-position indicator for load-break function CLOSED OPEN Switch-position indicator for earthing function OPEN EARTHED 5 Ready-for-service indicator 6 Rating and type plate Mimic diagram Option: Short-circuit / earth-fault indicator 9 Sockets for voltage detecting system 0 Arrangement of the busbars Feeder designation label 6 Option: Locking device for three-position switch-disconnector Manual operation for the mechanism of the earthing function Manual operation for the mechanism of the load-break function 5 Interlock of the cable compartment cover 6 Arrangement of the cable connections Type ME 0 Busbar system Switchgear vessel filled with gas 9 Busbar connection 0 Pressure relief device 6 Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

17 Design Panel design (examples) Circuit-breaker panel Section HA-e eps 6 5 5, Type LS (without voltage s) Partition for busbar Earthing busbar with earthing connection Three-position switch-disconnector Spring-operated mechanism 5 Bushing for cable plug with bolted contact (M6) 6 Option: Cable T-plug Cable compartment cover Cable compartment 9 Cable bracket 0 Earthing connection for earthing accessories HV HRC fuse assembly, cover removed Handle for replacing HV HRC fuse links Interlock for HV HRC fuse assembly Cover of the HV HRC fuse compartment 5 Spring-operated / stored-energy mechanism 6 Bushing for cable plug with plug-in contact Cable elbow plug with plug-in contact Switch-position indicator for load-break function CLOSED OPEN and, if applicable, HV HRC fuse tripped or shunt release tripped 9 Cover for access to the busbar connection and to the instrument s, screwed on 0 MR voltage MA current Covertobusbarconnection compartment, screwed on Option: SIPROTEC bay control unit Low-voltage compartment (standard) 56 5 HA-c eps 6 Vacuum circuit-breaker: 5 Opening for the hand crank for closing with manual operating mechanism for emergency operation with motor operating mechanism 6 Operating mechanism box Mechanical ON pushbutton (not supplied with spring-operated mechanism) Mechanical OFF pushbutton 9 Operating cycle counter 50 Spring charged indicator 5 Vacuum interrupter 5 Switch-position indicator Type LS-V (with voltage s) Option: Interlock between vacuum circuit-breaker and three-position switch-disconnector 5 Option: Three-phase current (protection ) 55 Cable-type current 56 MT plug-in voltage at the busbar 5 Bushing for connection of plug-in voltage s 5 Plug-in connection according to EN 50 / DINEN50asinterfacetype A 59 Option: MT plug-in voltage at the connection 60 Deep cable compartment cover 6 Wiring duct, removable, for control cables and/or bus wires 6 Cover screwed on 6 Option: Interlock between three-position switch-disconnector and circuit-breaker Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

18 R-HA-06 eps Components AH vacuum circuit-breaker Features According to IEC 6/ VDE (standards see page ) Application of all DH0 switchgear in hermetically sealed vessel in conformity with the system Climate-independent vacuum interrupter poles in the gas-filled switchgear vessel Maintenance-free for indoor installation according to IEC 6-/ VDE 06- (standards see page ) Individual secondary equipment A metal bellows is used for gasketless separation of the SF 6 -insulation and the operating mechanism as already used with success for over 00,000 vacuum interrupters Switching duties and operating mechanisms The switching duties of the vacuum circuit-breaker are dependent, among other factors, on its type of operating mechanism. Three operating mechanism versions are available: Motor operating stored-energy mechanism For auto-reclosing (K), For synchronization and rapid load transfer (U) Manual operating storedenergy mechanism For auto-reclosing (K) Manual spring-operated mechanism (= spring CLOSED, stored-energy OPEN) Notfor auto-reclosing (K) For normal closing and For storage of one opening operation Further operating mechanism features Located outside the switchgear vessel in the operating mechanism box and behind the control board Stored-energy spring mechanism for 0,000 operating cycles Abbreviations for switching duties and applications: U = Synchronization and rapidloadtransfer (make time 90 ms) K = Auto-reclosing O = OPEN operation CO t t Operating mechanism functions Motor operating mechanism ) (M *) Inthecaseofthemotoroperating mechanism, the closing spring is charged by means of a motor and latched in the charged position (the spring charged indication is visible). Closing is effected either by means of an ON pushbutton or a closing solenoid. The closing spring is recharged automatically (for auto-reclosing). Manual operating storedenergy mechanism The closing spring is charged by means of the hand crank supplied until latching of the closing latch is indicated (= spring charged indication). Subsequently the vacuum circuit-breaker can be closed either manually or electrically and the closing spring can be recharged manually. The possibility to close is thus stored once more (for auto-reclosing). Manual spring-operated mechanism (= spring CLOSED, stored-energy OPEN) The closing spring of the vacuum circuit-breaker is charged by means of the hand crank supplied until the vacuum circuitbreaker closes. Subsequently either manual or electrical opening is possible. Vacuum circuit-breakers with spring-operated mechanism are not suitable for auto-reclosing. Trip-free mechanism The vacuum circuit-breaker is fitted with a trip-free mechanism. ) Motor rating at V to 0 V DC: 50 W 0 V and 0 V AC:00 VA ) With closing solenoid * Item designation = CLOSE operation with subsequent OPEN operation at the shortest internal close-open time of the vacuum circuit-breaker = Dead time 0. s = Dead time min 5 6 Operating mechanism of the vacuum circuit-breaker (forthelegend,seepage9) Differentiation features between the vacuum circuit-breakers depending on the operating mechanism version Operating mechanism version Typical uses Mechanism function Mechanism operation Closing the vacuum circuit-breaker Closing solenoid, e.g. for remote electrical closing Rated operating sequence Autoreclosing (K) Motor operating stored-energy mechanism Utility substations and industrial plants Stored-energy CLOSED, stored-energy OPEN Manual operating stored-energy mechanism Manual springoperated mechanism Classic transfer Simple utility substations and substations substations (circuit-breaker without auxiliary employed as voltage supply switch) Stored-energy CLOSED, stored-energy OPEN With motor ), With hand manual (emergency) opera- crank tion at the panel including antipumping Electrically ) or mechanically at the panel with pushbutton Always provided, with electrical signal closing spring charged O-t-CO or O-t-CO-t -CO Suitable (multiple auto-reclosing possible) Mechanically at the panel with pushbutton, : electrically ) Option O-t-CO Suitable (only with closing solenoid) Spring CLOSED, stored-energy OPEN With hand crank Mechanically at the panel with hand crank (charging process) Without O or CO 0 5 For further technical data and description of typical applications, please refer also to Catalog HG. AH Vacuum Circuit-Breakers Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

19 Components Secondary equipment of the AH vacuum circuit-breaker ThescopeoftheAHvacuum circuit-breaker secondary equipment depends on the type of application and offers a wide range of s, thus allowing even the highest requirements to be satisfied. Closing solenoid Type AY5 0 (Y9 *) For electrical closing Shunt releases Types: Standard:AY50(Y*) Option: AX0(Y*), with energy store Tripping by protection device or electrical operation Current- operated release TypeAX0(Y6*)fortripping pulse W 0. Ws in conjunction with suitable protection systems, e.g. SJ protection system, MC6.. protection system, SEG relay (other designs on request) Used where no external auxiliary voltage is available, tripping by protection device Undervoltage release TypeAX0(Y*) Comprising: Energy store and unlatching mechanism Electromagnetic system which is permanently connected to voltage while the vacuum circuit-breaker is closed; tripping is initiated when this voltage drops Connection to voltage s possible Anti-pumping (standard) (mechanical and electrical) Function: If constant CLOSE and OPEN commands are present at the vacuum circuit-breaker at thesametime,thevacuumcircuit-breaker will return to the open position after closing. It remains in this position until a new CLOSE command is given. In this manner, continuous closing and opening (= pumping) is avoided. ) For utilization by the customer *Item designation Circuit-breaker tripping signal (standard) For electrical signalling (as pulse >0ms),e.g.toremotecontrol systems, in the case of automatic tripping (e.g. protection) Via limit switch (S6 *) and cut-out switch (S *) Varistor module To limit overvoltages to approx. V for protection devices (when inductive devices are mounted in the vacuum circuitbreaker) For auxiliary voltages W 60 V DC Auxiliary switch Type SV9 (S *) Standard: 6 NO+6 NC, of which NO+NC+changeover contacts are free ) Option: NO+ NC, of which NO+NC+changeover contacts are free ) Position switch Type SE (S *) For signalling closing spring charged Only in conjunction with storedenergy mechanisms Mechanical interlocking Dependent on the type of operating mechanism Option: Switchgear interlocking with the three-position switchdisconnector (: Closing lock-out for the three-position switch-disconnector in circuitbreaker panels type LS and LT) Option: Operating mechanism with mechanical interlocking as Spring-operated mechanism: Hand crank opening is blocked Stored-energy mechanism with closing solenoid (Y9 *) and pushbutton (S *): The pushbutton (S *) operated by the mechanical interlock prevents a continuous command to the closing solenoid During operation of the threeposition switch-disconnector from CLOSED to OPEN: Vacuum circuit-breaker cannot be closed. Abbreviations: NO = normally-open contact NC = normally-closed contact For further technical data and description of typical applications, please refer also to Catalog HG. AH Vacuum Circuit-Breakers HA-96b eps Basic equipment with manual spring-operated mechanism HA-9a eps Maximum equipment with motor operating stored-energy mechanism Secondary equipment (view into the operating mechanism box) Gear Circuit-breaker OPEN Position switch (S *) Option: nd release Closing spring st release (Y *) Motor (M *) Option: Mechanical interlocking with interrogation 5 Operating cycle counter of the three-position 6 Closing spring charged indicator switch-disconnector Closing solenoid (Y9 *) 5 Operating rod with contact pressure springs Option: Auxiliary switch NO+ NC 9 Auxiliary switch 6NO+6NC(S*) 0 Circuit-breaker CLOSED Interlocking to the threeposition switch-disconnector Actuation for closing the vacuum circuit-breaker Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00 9

20 R-HA-0 eps Components Three-position switch-disconnector Features Switch positions: CLOSED OPEN EARTHED Switching functions as general-purpose switchdisconnector (class E) according to IEC 6065-/ VDE IEC 6-0/ VDE 06-0 (standards see page ) Designed as a multi-chamber switch with the functions Switch-disconnector and Make-proof earthingswitch Operation via gas-tight welded-in metal bellows at the front of the switchgear vessel Three-position switch-disconnector EARTHED HA-a eps OPEN SF 6 insulation 5 6 CLOSED Detachable lever mechanism with three-position switch-disconnector Three-position switch-disconnector Coupling linkage Switchgear vessel Operating mechanism rocker 5 Detachable lever mechanism 6 Operating lever inserted Switch positions For further details, please refer to Catalog HA 0. Switchgear Types DJ and DH for Secondary Distribution Systems up to kv, Gas-Insulated (General Part) 0 Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

21 R-HA-0a eps Components Busbars Features Safe-to-touch as a result of use of metal covers Plug-in type Consisting of round-bar copper, insulated by means of silicone rubber Busbar joints with cross and end adapters, insulated by means of silicone rubber Insensitive to pollution and condensation Switchgear extension or panel replacement is possible without gas work Special busbar connections to metering panels type ME are possible. Connection to the Cable connection bushings of the adjacent panel or to the Busbar bushings Busbar arrangement in panel blocks within the switchgear vessel filled with gas Option screened busbar: Field control by means of electrically conductive layers on the silicone-rubber insulation Installation of MC0 current s is thus possible Independent of the site altitude Option: Capacitive voltage detecting system for the busbar, refer also to the product range, pages 0 to 5 Busbar compartments over panels with busbar connections, busbar covers removed 5 6 HA-9b eps Insulated plug-in type busbar unscreened design Top view 9 0 Busbar system End adapter Cross adapter Busbar insulation of silicone rubber Threaded bolt M / M6 5 Busbar, Cu, diameter mm 6 Stopper Switchgear vessel Primary enclosure panel Primary enclosure panel 9 Bushing 0 Capacitive tap at the bushings, earthed (standard) Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

22 R-HA-0a eps R-HA-00 eps R-HA-09 eps Components MT * and MT * plug-in voltage s for panel types LS, TR, SE and ME Panel section type LS-V HA-90b eps MT plug-in voltage (for the busbar) MT * for the busbar MT * at the cable connection MT plug-in voltage mounted on cable T-plug (in panel type LS-V) MT plug-in voltage (at the cable connection) Common features According to IEC 600-/ VDE 0- Designed as single-pole voltage s, plug-in type Inductive type Climate-independent Secondary connection by means of plugs inside the panel Connection with plug-in contact Installation behind metallic cover Features type MT Inside-cone system, metal-coated Features type MT Outside-cone system, metal-enclosed For deep cable compartment cover Installation Safe-to-touch arrangement due to metallic cover Arrangement on the switchgear vessel for busbar metering: MT voltage for panel types LSV/LS, SEV/SE, MSV/ME and LK V/LT Arrangement at the cable connection: MT voltage, pluggable on screened cable T-plug, for panel types LS-V, LS-V and TR-V (deep cable compartment cover required) MT voltage, directly pluggable via adapter on the bushing with plug-in contact (interface type A ), for panel type TR/V (deep cable compartment cover required) Technical data MT * and MT * voltage s Primary data Max. equipment operating voltage U m (=. x U N ) Rated voltage U N at max. rated short-duration power-frequency withstand voltage U d Rated lightning impulse withstand voltage U p Rated voltage factor ( h) Max. equipment operating voltage U m (=. x U N ) Rated voltage U N at max. rated short-duration power-frequency withstand voltage U d Rated lightning impulse withstand voltage U p Rated voltage factor ( h) kv./ kv at 0 kv.6 kv at 0 kv./ kv at 0 kv 5.0 kv at 0 kv 6.0/ kv at 0 kv 6.6/ kv at 0 kv./ kv at kv 0.0/ kv at kv.0/ kv at kv.6 kv / 0 kv. kv / 60 kv kv / 5 kv.9 x U N kv./ kv at kv 5.0/ kv at kv.5/ kv at 50 kv 0.0/ kv at 50 kv.0/ kv at 50 kv.5 kv / 95 kv kv / 5 kv.9 x U N Combination of MT * voltage s with cable T-plugs (screened, without metal housing) Make Type Combination Euromold (K) 00 TB/G yes (K) 0 TB, AGT 0/0 nkt cables on request yes Prysmian Kabel und Systeme FMCTs-00, FMCTg-00 yes Secondary data for MT voltage s Rated voltage 00/ V 0/ V () Rated voltage for auxiliary winding () Rated thermal limit current (measuring winding) Rated long-time thermal current ( h) Make Type Combination Südkabel SEHDT (/) yes Südkabel SET (/) on request Cooper DT 00 P yes Tyco Electronics RSTI L56xx for: 5-00 mm (M) >00mm (M6) 00/ V 0/ V () 6A A Rating VA Class Secondary data for MT voltage s Rated voltage 00/ V 0/ V () Rated voltage for auxiliary winding () Rated thermal limit current (measuring winding) 00/ V 0/ V () A Rated long-time thermal A current ( h) Rating VA Class on request (add.measures) on request * Disassembly is necessary in order to perform voltage tests on the switchgear on site (max. 0 % U d ) Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

23 R-HA-0 eps R-HA-0b eps Components MC6 three-phase current for panel type LS Panel section type LS HA-9b eps MC6 three-phase current MC6 three-phase current on the bushings of the cable connection MC6 three-phase current Features According to IEC 600-/ VDE 0- Designed as three-pole ring-core current Free of dielectrically stressed cast-resin parts (due to design) Insulation class E Inductive type Climate-independent Secondary connection by means of a terminal strip inside the panel Installation Arranged outside the switchgear vessel on the bushings of the cable connection Mounted at the factory Other designs () Three-phase current for protection equipment based on the current operation principle: SJx protection system as definite-time overcurrent protection Definite-time overcurrent protection relay make SEG, type WIP or type WIC Technical data MC6 0 three-phase current for I N 50 A and I D =60A Primary data Max. equipment operating 0. kv voltage U m Rated current I N A Rated short-duration power-frequency withstand kv voltage (winding test) Rated thermal short-time withstand current I th Rated continuous thermal current I D Transient overload current Rated peak withstand current I dyn 5 ka 60 A.5 x I D /h unlimited Secondary data Rated current A Rating VA Rated current () 5 A Current at I D. A Protec- Class 0 P tion core Overcurrent factor 0 MC6three-phasecurrent for I N 00 A and I D =60A Primary data Max. equipment operating 0. kv voltage U m Rated current I N A Rated short-duration power-frequency withstand kv voltage (winding test) Rated thermal short-time withstand current I th Rated continuous thermal current I D Transient overload current Rated peak withstand current I dyn 5 ka 60 A xi D /0.5h unlimited Secondary data Rated current A Rating VA Rated current () 5 A Current at I D.55 A Protec- Class 0 P tion core Overcurrent factor 0 Other values on request Other values on request Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

24 * R-HA-0a eps R-HA-0a eps R-HA-05 eps Components MC0andMC0cable-typecurrentsforpaneltypesLS,RKandTR Front view Panel section type LS HA-9b eps MC0 cable-type current MC0 cable-type current s, different overall heights Cable-type current Cable shield Features According to IEC 600-/ VDE 0- Designed as single-pole ringcore current s Free of dielectrically stressed cast-resin parts (due to design) Insulation class E Inductive type Climate-independent Secondary connection by means of a terminal strip inside the panel Only for shielded cables Installation MC0cable-typecurrent for panel type LS MC0cable-typecurrent for panel types RK and TR Arranged outside the switchgear vessel around the cable at the panel connection Transformers mounted on a supporting plate at the factory; final assembly around the cables on site For double cable: 00 mm deeper cable compartment cover * Max. 0 mm, depending on thecoredataofthemc0 cable-type current, overall heights 0 and 5 mm (observeflooropenings onpage6) MC0 cable-type current for the cables at the panel connection Technical data MC0 cable-type current Primary data Max. equipment operating 0. kv voltage U m Rated current I N 0 A to 600 A Rated short-duration kv power-frequency withstand voltage (winding test) Rated thermal short-time withstand current I th Rated continuous thermal current I D Transient overload current Rated peak withstand current I dyn Other values on request 5 ka.0 x I N :. x I N.5 x I D /hor xi D /0.5h unlimited Secondary data Rated current A (: 5 A) Meas- Class uring Overcurrent factor FS0 (: FS5) core Rating.5 VA to 0 VA Pro- Class 0 P 5 P tection Overcurrent factor 0 0 core Rating.5 VA to 0 VA Option: Secondary tap : (e.g.50 A 00 A) Dimensions Overall height H, dependent on the core data Outside diameter Inside diameter For cable diameter mm mm 55 mm 50 mm MC0 cable-type current Primary data Max. equipment operating 0. kv voltage U m Rated current I N 50 A to 600 A Rated short-duration kv power-frequency withstand voltage (winding test) Rated thermal short-time withstand current I th Rated continuous thermal current I D Transient overload current Rated peak withstand current I dyn Other values on request 5 ka.0 x I N :. x I N.5 x I D /hor xi D /0.5h unlimited Secondary data Rated current A (: 5 A) Meas- Class uring Overcurrent factor FS5 (: FS0) core Rating.5 VA to 0 VA Option: Secondary tap : Dimensions Overall height H Width x depth Inside diameter For cable diameter 9 mm 5 mm x mm 0 mm 6 mm Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

25 R-HA-0 eps R-HA-06a eps Components MC0 bus-type current s for panel type LT (for screened busbars only) Panel section type LT HA-9b eps MC0 bus-type current Features Used exclusively for screened busbars Preferably in combination with panel type ME According to IEC 600-/ VDE 0- Designed as single-pole ring-core current s Free of dielectrically stressed cast-resin parts (due to design) Insulation class E Inductive type Climate-independent Secondary connection by means of a terminal strip inside the panel Installation Arranged outside the switchgear vessel only on the screened busbars Installation of the bus-type current s either between the panels or alternatively Supplied loosely (including the busbar connections), if the mounting position of the bus-type current s lies at the joint of a transport unit MC0 bus-type current, mounted on screened busbars, in some cases between the panels Technical data MC0bus-typecurrent Primary data Max. equipment operating 0. kv voltage U m Rated current I N 00 A to 600 A Rated short-duration kv power-frequency withstand voltage (winding test) Rated thermal short-time withstand current I th Rated continuous thermal current I D Transient overload current Rated peak withstand current I dyn 5 ka.0 x I N :. x I N.5 x I D /hor xi D /0.5h unlimited Secondary data Rated current A (: 5 A) Meas- Class uring Overcurrent factor FS0 (: FS5) core Rating.5 VA to 0 VA Pro- Class 0 P 5 P * tection Overcurrent factor 0 0 core Rating.5VAto5VA Option: Secondary tap : (e.g. 50 A 00 A) Dimensions Overall width B, dependent on the core data Outside diameter Inside diameter 0 mm 50 mm 5 mm 55 mm MC0bus-type current Other values on request * On request Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00 5

26 R-HA-00a eps R-HA-0 eps R-HA-09a eps Components MA current s and MR voltage s for air-insulated billing metering panels type ME Panel section type ME HA-9c eps MR voltage MR voltage MA current Features MA current According to IEC 600-/ VDE 0- Dimensions according to DIN 600- (small design) Designed as single-pole indoor block-type current s Cast-resin insulated Insulation class E Secondary connection by means of screw-type terminals MR voltage According to IEC 600-/ VDE 0- Dimensions according to DIN (small design) Designed as indoor voltage s: Type MR, single-pole Option: Type MR, two-pole Cast-resin insulated Insulation class E Secondary connection by means of screw-type terminals MR voltage s and MA current s installed in billing metering panel type ME Technical data MA single-pole current Primary data Max. equipment operating / kv voltage U m.5 kv Rated short-duration power-frequency withstand voltage U d Other values on request / 50 kv kv Rated lightning impulse 5/ 5 kv withstand voltage U p 95 kv Rated current I N 5 A to 600 A Rated thermal short-time up to 5 ka withstand current I th Rated continuous thermal current I D Rated peak withstand current I dyn Secondary data Ratedcurrent Meas- Class uring Overcurrent factor core Rating Pro- Class tection Overcurrent factor core Rating.0 x I N :. x I N max..5 x I th Aor5A FS5 or FS0 0 VA to 5 VA 5Por0P 0 5VAto5VA MR single-pole voltage Primary data Max. equipment operating voltage U m (=. x U N ) Rated voltage U N at max. rated short-duration power-frequency withstand voltage U d Rated lightning impulse withstand voltage U p Rated voltage factor ( h) Max. equipment operating voltage U m (=. x U N ) Rated voltage U N at max. rated short-duration power-frequency withstand voltage U d Rated lightning impulse withstand voltage U p Rated voltage factor ( h) Secondary data Rated voltage Rated voltage for auxiliary winding () Other values on request kv MA current./ kv at 0 kv.6/ kv at 0 kv./ kv at 0 kv 5.0/ kv at 0 kv 6.0/ kv at 0 kv 6.6/ kv at 0 kv./ kv at kv 0.0/ kv at kv.0/ kv at kv.6 kv / 0 kv. kv / 60 kv kv / 5 kv.9 x U N kv./ kv at kv 5.0/ kv at kv.5/ kv at 50 kv 0.0/ kv at 50 kv.0/ kv at 50 kv.5 kv / 95 kv kv / 5 kv.9 x U N 00/ V 0/ V () 0/ V () 00/ V 0/ V () 0/ V () 0VA 50VA 00VA Rating Class Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

27 R-HA-0a eps R-HA-0 eps Components MK * metal-enclosed combined s for billing metering panels type ME HA-95b eps Panel section type ME MK combined voltage MK combined current MK combined voltage MK combined current Features MK * combined, comprising MK combined current MK combined voltage According to IEC 600-/ VDE 0-5 Designed as indoor s, single-pole combination Metal-enclosed Insulation class E Inductive type Secondary connection by means of screw-type terminals Panel type ME For combination with left-hand panels As individual panels or As panel blocks (on request) For combination with right-hand panels as end panels or panel blocks MK combined s installed in billing metering panel type ME Technical data MK combined current Primary data Max. equipmen+t kv kv operating voltage U m Rated short-duration kv 50 kv power-frequency withstand voltage U d Rated lightning impulse withstand voltage U p 5 kv 5 kv Rated current I N 50 A to 600 A Rated thermal short-time up to 5 ka withstand current I th Rated continuous thermal current I D Rated peak withstand current I dyn Secondary data Ratedcurrent Meas- Class uring Overcurrent factor core Rating Pro- Class tection Overcurrent factor core Rating Secondary multiratio.0 x I N :. x I N max..5 x I th Aor5A FS5 or FS0 0 VA to 5 VA 0 P 0 5VAor5VA MK combined MK combined voltage Primary data Max. equipment operating voltage U m (=. x U N ) Rated voltage U N at max. rated short-duration power-frequency withstand voltage U d Rated lightning impulse withstand voltage U p Rated voltage factor ( h) Max. equipment operating voltage U m (=. x U N ) Rated voltage U N at max. rated short-duration power-frequency withstand voltage U d Rated lightning impulse withstand voltage U p Rated voltage factor ( h) Secondary data Rated voltage Rated voltage for auxiliary winding () kv./ kv at 0 kv.6/ kv at 0 kv./ kv at 0 kv 5.0/ kv at 0 kv 6.0/ kv at 0 kv 6.6/ kv at 0 kv./ kv at kv 0.0/ kv at kv.0/ kv at kv.6 kv / 0 kv. kv / 60 kv kv / 5 kv.9 x U N kv./ kv at kv 5.0/ kv at kv.5/ kv at 50 kv 0.0/ kv at 50 kv.0/ kv at 50 kv.5 kv / 95 kv kv / 5 kv.9 x U N 00/ V 0/ V () 00/ V 0/ V () Rating 0 VA 5 VA 50 VA Class * Available only as a combination of current and voltage s Other values on request Other values on request Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

28 R-HA-0 eps R-HA-0 eps R-HA-05 eps R-HA-06 eps R-HA-0 eps R-HA-0 eps Components Cable connection Features Bushings with outside cone Uniform cable connection height 55 mm With cable bracket, e.g. type C0 according to DINEN Access to the cable compartment only if the feeder has been isolated and earthed Special features Inring-main panels In circuit-breaker panels Incablepanels: With bolted contact (M6) as interface type C according to EN 50/ DINEN50 For thermoplasticinsulated cables For paper-insulated mass-impregnated cables with adapter systems For conventional cable sealing ends via elbow adapter AKE 0/60 (make Siemens) ForcableT-plugsorcable elbow plugs with bolted contact (M 6) For connection crosssections up to 00 mm² (standard) Cable routing downwards, cable connection at front For rated normal currents of 00/60 A In panels: With plug-in contact as interface type A according to EN 50 / DINEN50 For cable elbow plugs with plug-in contact For thermoplasticinsulated cables For connection crosssections up to 0 mm² For rated normal currents of 00 A 5 9 Cable connection Examples L L L L L L Cable compartment, as-delivered condition * L L Cable compartment, as-delivered condition * L L L L 6 0 Cable plugs with bolted contact (M6) L L Cable plugs with bolted contact (M6) L L L L Cable connections in ring-main panels Prepared for cable plugs with bolted contact (M6) Phase L: Make Euromold, type K00 LB as cable elbow plug Phase L: Make Euromold, type K00 TB as cable T-plug Phase L: Make Euromold, type AGT 0/60 as cable T-plug For s A, B, C and E, see below Cable connections in circuit-breaker panels 5 Prepared for cable plugs with bolted contact (M6) 6 Phase L: Elbow adapter, make Siemens, type AKE 0/60 Phase L: Make Euromold, type K00 TB as cable T-plug Phase L: Make Euromold, type AGT 0/60 as cable T-plug For s A, B, C, EandF,seebelow Cable connections in panels 9 Prepared for cable elbow plugs with plug-in contact 0 Phase L: Make Euromold, type AWGL Phase L: Make Euromold, type K5 LR Phase L: Make Euromold, type AGW 0/50 (with metal housing) Options See figures on the right Cable compartment, as-delivered condition * Cable elbow plugs with plug-in contact For s A, D and F, see below * Cable plugs, cable sealing ends and cable clamps are not included in the scope of supply Options A Mounted cable clamps B Short-circuit / earth-fault indicator C Double cable connection with corresponding cable plugs and deep cable compartment cover D Bushings as interface type C according to EN 50 / DIN EN 50 for cable plugs with bolted contact (M6) E Suitable for connection of plug-in surge arresters in conjunction with corresponding cable T-plugs F Suitable for connection of MT metal-enclosed voltage s in conjunction with corresponding cable T-plugs; deep cable compartment cover is required Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00

29 R-HA-0 eps R-HA-00 eps R-HA-09a eps R-HA-0a eps Components Low-voltage equipment Low-voltage compartment * Overall height Standard 600 mm Option 900 mm Partitioned safe-to-touch from the high-voltage part of the panel Installation on the panel: Standardforcircuit-breaker panel type LS and bus sectionalizer with switch-disconnector type LT Option for all other panel types, depending on the scope of the secondary equipment For accommodation of protection, control, measuring and metering equipment, e. g. suitable for multifunction protection device SIPROTEC SJ6 Electronic control board of the multifunction protection device SIPROTEC SJ6 with the following features: User-programmable LEDs with application-specific label, for displaying any desired process and equipment data LCDforprocessand equipment data, e.g. for Measuring and metering values Binary information on status of switchgear and switching device Protectiondata General indications Alarms Keys for navigation in the menus and for entering values Four user-programmable function keys for frequently performed actions Low-voltage niche Only inside billing metering panels type ME Option: For accommodation, e.g. of voltage, m.c.b.s Low-voltage compartment Low-voltage compartment of a circuit-breaker panel type LS Open low-voltage compartment with (al) equipment Low-voltage niche Electronic control board with multifunction protection device SIPROTEC SJ6 LEDs LCD Navigation keys Function keys Low-voltage niche Equipment () Low-voltage cables Control cables of the panel to the low-voltage compartment are connected via multi-pole, coded module plug connectors Option: Plug-in bus wires from panel to panel are routed in the separate wiring duct on the panel Low-voltage niche of a billing metering panel type ME with open cover * Door hinge on the left (standard) Switchgear Type DH0, up to kv, Gas-Insulated, Extendable Siemens HA. 00 9

Switchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable

Switchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable www.siemens.com/medium-voltage-switchgear Switchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable Medium-Voltage Switchgear Catalog HA 41.43 2012 Answers for infrastructure and cities. Neue Bilder

More information

Catalog HA Edition up to 24 kv, Air-Insulated, Extendable. Medium-Voltage Switchgear. siemens.com/simosec

Catalog HA Edition up to 24 kv, Air-Insulated, Extendable. Medium-Voltage Switchgear. siemens.com/simosec Catalog HA 41.43 Edition 2018 Switchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable Medium-Voltage Switchgear siemens.com/simosec Application Typical uses R-HA41-135.tif R-HA40-112.tif R-HA41-115.tif

More information

Fixed-Mounted Circuit-Breaker Switchgear Type NXPLUS C up to 24 kv, SF 6 -Insulated. Medium-Voltage Switchgear Catalog HA 35.

Fixed-Mounted Circuit-Breaker Switchgear Type NXPLUS C up to 24 kv, SF 6 -Insulated. Medium-Voltage Switchgear Catalog HA 35. Fixed-Mounted Circuit-Breaker Switchgear Type NXPLUS C up to kv, SF 6 -Insulated Medium-Voltage Switchgear Catalog HA 5. 00 Invalid: Catalog HA 5. 00 R-HA5-05 eps Fixed-Mounted Circuit-Breaker Switchgear

More information

Switchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated

Switchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated Switchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated Medium-Voltage Switchgear Catalog HA 40.2 2009 Answers for energy. -HA40-111.eps -HA40-110.eps -HA40-109.eps -HA40-112.eps

More information

Switchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable

Switchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable Switchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable Medium-Voltage Switchgear Totally Integrated Power SIMOSEC Catalog HA 41.43 Edition Sept. 2014 Answers for infrastructure and cities. Neue

More information

8DJ. Maintenance-free for lifetime

8DJ. Maintenance-free for lifetime 8DJ Maintenance-free for lifetime Energy Distribution Welcome! Page 2 October 1 st 2008 8DJ Main Applications for Medium-Voltage Switchgear Power generation Power stations G Power transmission High and

More information

NXPLUS C Single busbar. Maintenance-free for lifetime

NXPLUS C Single busbar. Maintenance-free for lifetime NXPLUS C Single busbar Maintenance-free for lifetime Energy Distribution Welcome! Page 2 Content Overview Technical data Typicals Panel design Circuit-Breaker panel Busbar Operation Metering Low-voltage

More information

Switchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated

Switchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated Switchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated Medium-Voltage Switchgear Catalog HA 40.2 2010 Answers for energy. -HA40-110.eps -HA40-109.eps -HA40-112.eps -HA40-111.eps

More information

Fixed-Mounted Circuit-Breaker Switchgear Type NXPLUS up to 40.5 kv, Gas-Insulated

Fixed-Mounted Circuit-Breaker Switchgear Type NXPLUS up to 40.5 kv, Gas-Insulated www.siemens.com/medium-voltage-switchgear Fixed-Mounted Circuit-Breaker Switchgear Type NXPLUS up to 40.5 kv, Gas-Insulated Medium-Voltage Switchgear Catalog HA 35.5 203 Answers f infrastructure and cities.

More information

Fixed-Mounted Circuit-Breaker Switchgear Type 8DA and 8DB up to 40.5 kv, Gas-Insulated

Fixed-Mounted Circuit-Breaker Switchgear Type 8DA and 8DB up to 40.5 kv, Gas-Insulated www.siemens.com/medium-voltage-switchgear Fixed-Mounted Circuit-Breaker Switchgear Type 8D and 8DB up to 0.5 kv, Gas-Insulated Medium-Voltage Switchgear Catalog H 35.11 201 nswers for infrastructure and

More information

Type SIMOPRIME A4, up to 24 kv, Air-Insulated Medium-Voltage Switchgear

Type SIMOPRIME A4, up to 24 kv, Air-Insulated Medium-Voltage Switchgear Circuit-Breaker www.siemens.com/energy Switchgear Type SIMOPRIME A4, up to 24 kv, Air-Insulated Medium-Voltage Switchgear s Technology Circuit-Breaker Switchgear Type SIMOPRIME, up to 17.5 kv, Air-Insulated

More information

Fixed-Mounted Circuit-Breaker Switchgear Type 8DA and 8DB up to 40.5 kv, Gas-Insulated

Fixed-Mounted Circuit-Breaker Switchgear Type 8DA and 8DB up to 40.5 kv, Gas-Insulated Fixed-Mounted Circuit-Breaker Switchgear Type 8D and 8DB up to 0.5 kv, Gas-Insulated Medium-Voltage Switchgear Catalog H 35. 00 nswers for energy. R-H35-30.eps pplication Public power supply system R-H35-3.eps

More information

Switchgear Type 8BT1, up to 24 kv, air-insulated. Medium Voltage Switchgear Catalog HA 26.

Switchgear Type 8BT1, up to 24 kv, air-insulated.   Medium Voltage Switchgear Catalog HA 26. www.siemens.com/medium-voltage-switchgear Switchgear Type 8BT1, up to 24 kv, air-insulated Medium Voltage Switchgear Catalog HA 26.31 2012 Answers for infrastructure and cities. R-HA26-013. eps Contents

More information

Circuit-Breaker Switchgear Type SIMOPRIME, up to 17.5 kv, Air-Insulated Medium-Voltage Switchgear.

Circuit-Breaker Switchgear Type SIMOPRIME, up to 17.5 kv, Air-Insulated Medium-Voltage Switchgear. Circuit-Breaker Switchgear Type SIMOPRIME, up to 17.5 kv, Air-Insulated Medium-Voltage Switchgear www.siemens.com/energy Technology s Contents Application Page Benefits 2 Typical uses 2 and 3 Technical

More information

Benefits, typical uses

Benefits, typical uses R-HA26-013. eps Switchgear Type 8BT1, up to 24kV,Air-Insulated Contents Application Page Application Benefits 2 Typical uses 2 and 3 Technical Data Ratings 4 Classification, dimensions, 5 room planning

More information

Features. 2 Siemens HA Page. 8DJ10 switchgear is a factoryassembled,

Features. 2 Siemens HA Page. 8DJ10 switchgear is a factoryassembled, Switchgear Type 8DJ0 up to 4 kv, Gas-Insulated Contents Application, Requirements Application, Requirements Features Designs, typical application Technical Data, Shipping Electrical data, temperature,

More information

Switchgear Type 8DJH 36 for Secondary

Switchgear Type 8DJH 36 for Secondary Catalog HA 40.3 Edition 2017 Switchgear Type 8DJH 36 for Secondary Distribution Systems up to 36 kv, Gas-Insulated Medium-Voltage Switchgear siemens.com/8djh36 Application Typical uses R-HA40-135.tif R_HA40-150a

More information

Switchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated

Switchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated Catalog HA 40.2 Edition 2017 Switchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated Medium-Voltage Switchgear siemens.com/8djh Application Typical uses R-HA40-111.tif R-HA40-112.tif

More information

SION Vacuum Circuit-Breakers. Answers for energy. Medium-Voltage Equipment Selection and Ordering Data. Catalog HG

SION Vacuum Circuit-Breakers. Answers for energy. Medium-Voltage Equipment Selection and Ordering Data. Catalog HG Medium-Voltage Equipment Selection and Ordering Data Catalog HG 11.0 008 Answers for energy. R-HG11-17.tif Siemens HG 11.0 008 Contents Contents Page SION Vacuum Circuit-Breakers Description General Construction

More information

SION Vacuum Circuit-Breakers. Answers for energy. Medium-Voltage Equipment Selection and Ordering Data. Catalog HG

SION Vacuum Circuit-Breakers. Answers for energy. Medium-Voltage Equipment Selection and Ordering Data. Catalog HG Medium-Voltage Equipment Selection and Ordering Data Catalog HG 11.02 2011 Answers for energy. R-HG11-172.tif 2 Siemens HG 11.02 2011 Contents SION Vacuum Circuit-Breakers Medium-Voltage Equipment Catalog

More information

Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 27.6 kv, ANSI, Air-Insulated, Extendable

Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 27.6 kv, ANSI, Air-Insulated, Extendable Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Medium-Voltage Switchgear Catalog HA 4.3 008 Answers for energy. R-HA4-086 eps Contents Application Application,

More information

Types. Fixed-mounted circuitbreaker. NXPLUS C is a factoryassembled,

Types. Fixed-mounted circuitbreaker. NXPLUS C is a factoryassembled, R-HA5-05a eps Fixed-Mounted Circuit-Breaker Switchgear Type NXPLUS C, up to kv, Gas-Insulated Contents Application Page Types Application Types, typical uses, ratings to Requirements Features, safety,

More information

medium voltage switchgear manufacturer VACUUM CIRCUIT-BREAKER SWITCHGEAR TYPE SIMOPRIME, UP TO 17.5kV, AIR INSULATED MEDIUM-VOLTAGE SWITCHGEAR. UNDER LICENSE BY SIEMENS. www.simosynergy.com/simoprime VACUUM

More information

Medium-Voltage Switchgear Type 8DH10 up to 24 kv, Gas-Insulated, Extendable

Medium-Voltage Switchgear Type 8DH10 up to 24 kv, Gas-Insulated, Extendable Medium-Voltage Switchgear Type 8DH10 up to 24 kv, Gas-Insulated, Extendable Medium-Voltage Switchgear INSTALLATION AND OPERATING INSTRUCTIONS Order No.: 818-6602.0 Revision: 05 Issue: 24-10-2008 About

More information

AIR INSULATED EXTENDABLE SWITCHGEAR UP TO 12KV GUIDE

AIR INSULATED EXTENDABLE SWITCHGEAR UP TO 12KV GUIDE AIR INSULATED EXTENDABLE SWITCHGEAR UP TO 12KV GUIDE Certificate Number FM35831 APPLICATION Typical Uses and Classification The MSGair switchgear is used in transformer and switching substations mainly

More information

Medium-Voltage Switchgear

Medium-Voltage Switchgear Medium-Voltage Switchgear Type SIMOSEC 12 up to 12 kv, Extendable, up to 1250 A Medium-Voltage Switchgear INSTALLATION AND OPERATING INSTRUCTIONS Order No.: 834-6001.9 Revision: 01 Issue: 21-09-2009 About

More information

Fixed-Mounted Circuit-Breaker Switchgear up to 36 kv, SF 6 -Insulated

Fixed-Mounted Circuit-Breaker Switchgear up to 36 kv, SF 6 -Insulated Medium- Switchgear Catalog HA 35.51 2000 Supersedes: Catalog HA 35.51 1998 Contents General Infmation Page Application, features, requirements General Infmation Application, features, 2 requirements Technical

More information

Siemens AG Catalog HG11.07 Edition 10/ AE6 Medium-Voltage Equipment. siemens.com/sion

Siemens AG Catalog HG11.07 Edition 10/ AE6 Medium-Voltage Equipment. siemens.com/sion Siemens AG 2018 Catalog HG11.07 Edition 10/ 2018 SION Lateral Vacuum Circuit-B Breaker with Laterrall Operating Mechaniism m 3AE6 Medium-Voltage Equipment siemens.com/sion 2 Catalog HG11.07 10 / 2018 SION

More information

Vacuum Circuit-Breaker Modules

Vacuum Circuit-Breaker Modules Vacuum s Medium-Voltage Equipment Catalog HG.5 998 Vacuum s Medium-Voltage Equipment Description Catalog HG.5 998 Siemens AG 998 NXACT Vacuum vacuum circuit-breaker module, kv Features DIN EN ISO 900

More information

CPG.1 Gas insulated, single busbar cubicle range Up to 27 kv / 2000 A / 31.5 ka Up to 38 kv / 2000 A / 31.5 ka IEEE Standards

CPG.1 Gas insulated, single busbar cubicle range Up to 27 kv / 2000 A / 31.5 ka Up to 38 kv / 2000 A / 31.5 ka IEEE Standards Medium Voltage Switchgear Primary Distribution CPG.1 Gas insulated, single busbar cubicle range Up to 27 kv / 2000 A / 31.5 ka General description Presentation Ormazabal s CPG System includes the CPG.1

More information

CPG.0 Single busbar gas-insulated cubicles

CPG.0 Single busbar gas-insulated cubicles MV Switchgear Primary Distribution CPG.0 Single busbar gas-insulated cubicles Up to 36 kv CPG System The quality of products designed, manufactured and installed by Ormazabal is underpinned by the implementation

More information

Circuit-Breaker Switchgear Type SIMOPRIME, up to 17.5 kv, Air-Insulated

Circuit-Breaker Switchgear Type SIMOPRIME, up to 17.5 kv, Air-Insulated Circuit-Breaker Switchgear Type SIMOPRIME, up to 17.5 kv, Air-Insulated Medium-Voltage Switchgear Catalog HA 26.11 2008 Answers f energy. R-HA26-010c.eps Contents Application Benefits, typical uses Application

More information

>> WI. up to 52 kv. Gas-Insulated Switchgear with Vacuum Circuit-Breaker 1, 2 or 3-phase. System configuration AREVA T&D

>> WI. up to 52 kv. Gas-Insulated Switchgear with Vacuum Circuit-Breaker 1, 2 or 3-phase. System configuration AREVA T&D GAS-INSULATED SWITCHGEAR UNITS >> WI up to 52 Gas-Insulated Switchgear with Vacuum Circuit-Breaker 1, 2 or 3-phase System configuration AREVA T&D Conditions of Delivery The General Conditions of Delivery

More information

HB3 Generator Circuit-Breaker Switchgear

HB3 Generator Circuit-Breaker Switchgear Catalog HB3 Edition 2017 HB3 Generator Circuit-Breaker Switchgear Medium-Voltage Switchgear siemens.com/generatorswitchgear R-HB1-001.tif R-HB3 001.tif R-HB3 003.tif R-HB3 002.jpg 2 HB3 Generator Circuit-Breaker

More information

Air Insulated Switchgear NXAirS, 40.5kV Answers for infrastructure and cities.

Air Insulated Switchgear NXAirS, 40.5kV Answers for infrastructure and cities. www.siemens.com.cn/medium-voltage-switchgear Air Insulated Switchgear NXAirS, Answers for infrastructure and cities. Applications Page Application Type 2 Typical uses 3 Classification 3 Type NXAirS withdrawable

More information

3TM Vacuum Contactors

3TM Vacuum Contactors Catalog Extract HG 11.23 Edition 2016 Catalog Extract Medium-Voltage Equipment siemens.com/3tm R-HG11-343.psd 2 Siemens HG 11.23 2016 Contents Medium-Voltage Equipment Catalog Extract HG 11.23 2016 Contents

More information

B kv T&D GAS INSULATED SWITCHGEAR

B kv T&D GAS INSULATED SWITCHGEAR GAS INSULATED SWITCHGEAR B 105 170 300 kv The increasing demand for electrical power in cities and industrial centers necessitates the installation of a compact and efficient distribution and transmission

More information

Power Transmission and Distribution. NXPLUS C double busbar. The economical solution when replacing old systems

Power Transmission and Distribution. NXPLUS C double busbar. The economical solution when replacing old systems Power Transmission and Distribution NXPLUS C double busbar The economical solution when replacing old systems The compact switchgear system NXPLUS C double busbar up to kv, up to 5 ka and up to 500A the

More information

HB3-80 Generator Circuit-Breaker Switchgear. Medium-Voltage Switchgear. Totally Integrated Power HB3-80. Catalog HB3-80.

HB3-80 Generator Circuit-Breaker Switchgear. Medium-Voltage Switchgear. Totally Integrated Power HB3-80. Catalog HB3-80. HB3-80 Generator Circuit-Breaker Switchgear Medium-Voltage Switchgear Totally Integrated Power HB3-80 Catalog HB3-80 Edition 2014 www.siemens.com/generatorswitchgear R-HB1-001.tif R-HB3-001.tif R-HB3-003.tif

More information

Voltage Rated operating voltage [kv] Rated power frequency withstand voltage [kv] Rated lightning impulse withstand voltage [kv]

Voltage Rated operating voltage [kv] Rated power frequency withstand voltage [kv] Rated lightning impulse withstand voltage [kv] BasisBlock MC 1 Standards and Regulations IEC 62271-200 ; VDE 0671-200 ; BS EN 62271-200 Technical Data MC1-12 MC1-24 Voltage Rated operating voltage [kv] 12 24 Rated power frequency withstand voltage

More information

Medium-Voltage Switchgear Medium-voltage switchgear type 8DJH, block versions Up to 24 kv, gas-insulated

Medium-Voltage Switchgear Medium-voltage switchgear type 8DJH, block versions Up to 24 kv, gas-insulated Medium-Voltage Switchgear Medium-voltage switchgear type 8DJH, block versions Up to 24 kv, gas-insulated Medium-Voltage Switchgear INSTALLATION AND OPERATING INSTRUCTIONS Order No.: 500-8067.9 Revision:

More information

TECHNICAL SPECIFICATION OF 11KV SF6 / VCB METAL ENCLOSED, INDOOR (PANEL TYPE) / OUTDOOR RING MAIN UNIT (RMU). (IEC standard equipment)

TECHNICAL SPECIFICATION OF 11KV SF6 / VCB METAL ENCLOSED, INDOOR (PANEL TYPE) / OUTDOOR RING MAIN UNIT (RMU). (IEC standard equipment) TECHNICAL SPECIFICATION OF 11KV SF6 / VCB METAL ENCLOSED, INDOOR (PANEL TYPE) / OUTDOOR RING MAIN UNIT (RMU). (IEC standard equipment) 1 SCOPE OF SUPPLY This specification covers design, manufacture, shop

More information

Gas Insulated Metal-clad Switchgear, HMGS!

Gas Insulated Metal-clad Switchgear, HMGS! Medium Voltage HMGS-G10 HYUNDAI Medium Voltage Gas Insulated Metal-clad Switchgear, HMGS! SF6 Gas Insulated Metal-clad Switchgear is an integrated assembly of vacuum circuit breaker, 3-position switch,

More information

HIGS Highly Integrated Generator Circuit-Breaker Switchgear

HIGS Highly Integrated Generator Circuit-Breaker Switchgear Catalog HIGS Edition 2018 HIGS Highly Integrated Generator Circuit-Breaker Switchgear Medium-Voltage Switchgear siemens.com/generatorswitchgear HIGS_2 tif HIGS_1 jpg HIGS_3 tif Application: Gas-fired steam

More information

ZX1.5-R. Gas-insulated medium voltage for railway application DISTRIBUTION SOLUTIONS. Gas-insulated medium voltage for railway application ZX1.

ZX1.5-R. Gas-insulated medium voltage for railway application DISTRIBUTION SOLUTIONS. Gas-insulated medium voltage for railway application ZX1. DISTRIBUTION SOLUTIONS ZX1.5-R Gas-insulated medium voltage for railway application Safety and reliability 20% footprint saving Easy operation Complete solution ZX1.5-R Gas-insulated medium voltage for

More information

GE Consumer & Industrial Power Protection. New. SecoGear kV Metal-clad Switchgear. GE imagination at work

GE Consumer & Industrial Power Protection. New. SecoGear kV Metal-clad Switchgear. GE imagination at work GE Consumer & Industrial Power Protection New SecoGear 12-24kV GE imagination at work General SecoGear metal-clad switchgear is designed and manufactured with advance technology and has been comprehensively

More information

Medium-Voltage Switchgear OPERATING INSTRUCTIONS

Medium-Voltage Switchgear OPERATING INSTRUCTIONS Medium-Voltage Switchgear Circuit-Breaker Switchgear Type NXAIR: Factory-Assembled, Type-Tested and Metal- Enclosed Switchgear for Indoor Installation, Air-Insulated Loss of Service Continuity Category:

More information

DIRECT CONTACT. Switchgear Sales Team TEL : ~9 CHANGWON PLANT Switchgear Design Team TEL : ~9

DIRECT CONTACT. Switchgear Sales Team TEL : ~9 CHANGWON PLANT Switchgear Design Team TEL : ~9 HEAD OFFICE 450, Gongdeok-Dong, Mapo-Gu, Seoul, Korea 121-720 TEL : 82-2-707-7000 R&D CENTER 183, Hogye-Dong, Dongan-Gu, Anyang-Shi, Gyeonggi-Do, Korea 431-080 TEL : 82-31-428-1000 CHANGWON PLANT 454-2,

More information

Reliable medium-voltage switchgear for fail-safe operation, up to 24 kv siemens.com/simoprime-partner

Reliable medium-voltage switchgear for fail-safe operation, up to 24 kv siemens.com/simoprime-partner SIMOPRIME partnering Reliable medium-voltage switchgear for fail-safe operation, up to 24 kv siemens.com/simoprime-partner SIMOPRIME partnering Typical applications SIMOPRIME technology partner: air insulated

More information

TECHNICAL CATALOGUE TK 502/20 EN. ZX2 Gas-insulated medium voltage switchgear

TECHNICAL CATALOGUE TK 502/20 EN. ZX2 Gas-insulated medium voltage switchgear TECHNICAL CATALOGUE TK 502/20 EN ZX2 Gas-insulated medium voltage switchgear Contents Page 1 Introduction 5 2 Applications 6 3 Characteristics 7 4 Your benefit 8 5 Technical data 9 5.1 Technical data of

More information

AIR INSULATED METAL ENCLOSED SWITCHGEAR AND CONTROLGEAR

AIR INSULATED METAL ENCLOSED SWITCHGEAR AND CONTROLGEAR AIR INSULATED METAL ENCLOSED SWITCHGEAR AND CONTROLGEAR ANGLER SWITCHING DEVICES CONTENTS 1. General 2. Switchgear Types - Switch Disconnector - Disconnector 3. Cubicle Types - Cubicle with Switch Disconnector

More information

VB1-D Generator Circuit-Breaker Switchgear

VB1-D Generator Circuit-Breaker Switchgear Catalog VB1-D Edition 2016 VB1-D Generator Circuit-Breaker Switchgear Medium-Voltage Switchgear siemens.com/generatorswitchgear 05_VB1_D_ECI tif 11_VB1_D_ECI tif R-HB1-001 tif R-HB3-001 tif Application:

More information

DISTRIBUTION SOLUTIONS. GSec Gas-insulated switching and isolating apparatus

DISTRIBUTION SOLUTIONS. GSec Gas-insulated switching and isolating apparatus DISTRIBUTION SOLUTIONS GSec Gas-insulated switching and isolating apparatus GSec is a three-position SF6 gas-insulated switchdisconnector designed for use in medium voltage switchgear for secondary distribution

More information

SF6 GAS INSULATED METAL ENCLOSED SWITCHGEAR (GIS)

SF6 GAS INSULATED METAL ENCLOSED SWITCHGEAR (GIS) SF6 GAS INSULATED METAL ENCLOSED SWITCHGEAR (GIS) About company The «Elektroapparat» plant starts its operation in 1922 as a plant manufacturing high-voltage electrical equipment. During the first two

More information

Outdoor live tank vacuum circuit breaker Type OVB-VBF for 24/36/40.5 kv applications

Outdoor live tank vacuum circuit breaker Type OVB-VBF for 24/36/40.5 kv applications Outdoor live tank vacuum circuit breaker Type OVB-VBF for 24/36/40.5 kv applications ABB a global leader ABB is a global leader in power and automation technologies that enable utility and industry customers

More information

SF 6 Gas Insulated Switchgear Type SDH714 for 72.5 to 145 kv

SF 6 Gas Insulated Switchgear Type SDH714 for 72.5 to 145 kv Three-phase Encapsulated Type SF 6 Gas Insulated Switchgear Type SDH714 for 72.5 to 145 kv 06B1-E-0020 Small Space Requirement, High Reliability and Safety ー 72.5 to 145kV GIS, SDH714 The number of application

More information

SF 6 gas insulated RMU SafePlus 24 kv. ABB SafePlus 24 kv SF6 gas insulated RMU 1

SF 6 gas insulated RMU SafePlus 24 kv. ABB SafePlus 24 kv SF6 gas insulated RMU 1 SF 6 gas insulated RMU SafePlus 24 kv 25.03.2010 SafePlus 24 kv SF6 gas insulated RMU 1 Secondary distribution 400 kv Transmission substation Transformer 40-70 kv 130 kv Main Substation Secondary distribution

More information

General. Main electric circuits Fuses compartment Operating mechanisms Cables connection compartment

General. Main electric circuits Fuses compartment Operating mechanisms Cables connection compartment General The switchgear must be suitable for 36 kv rated voltage and specifically conceived for the secondary distribution substations in M.V. with either ring or radial type networks. The switchgear must

More information

M-RING 24. SF6 Insulated Ring Main Unit Metal-Enclosed (LSC2A)

M-RING 24. SF6 Insulated Ring Main Unit Metal-Enclosed (LSC2A) M-RING 24 SF6 Insulated Ring Main Unit Metal-Enclosed (LSC2A) Contents General Description Advanced facilities and process Advanced design philosophy Definition of M-RING 24 Standards Service conditions

More information

GMA up to 24 kv Gas-insulated switchgear for primary distribution - as single and double busbar system

GMA up to 24 kv Gas-insulated switchgear for primary distribution - as single and double busbar system Medium Voltage Distribution GMA up to 24 kv Gas-insulated switchgear for primary distribution - as single and double busbar system System configuration Delivery conditions The General Conditions of Delivery

More information

BETA Low-Voltage Circuit Protection

BETA Low-Voltage Circuit Protection BETA Low-Voltage Circuit Protection /2 Introduction Miniature Circuit Breakers /4 5SP and 5SY miniature circuit breakers / 5SJ6...-.KS miniature circuit breakers with plug-in terminal /21 5SY6 0 miniature

More information

EMC 24 SERIES METAL CLAD SWITCHGEAR. We engineer, we assure. Up to 24 kv - 25 ka With Withdrawable, Air-Insulated, Medium Voltage Distribution Panel

EMC 24 SERIES METAL CLAD SWITCHGEAR. We engineer, we assure. Up to 24 kv - 25 ka With Withdrawable, Air-Insulated, Medium Voltage Distribution Panel We engineer, we assure. EMC 24 SERIES METAL CLAD SWITCHGEAR Up to 24 kv - 25 ka With Withdrawable, Air-Insulated, Medium Voltage Distribution Panel Saudi Cable Company REF: EMC24-EN-16-04 2 www.elimsan.com

More information

UniGear. Technical Guide

UniGear. Technical Guide UniGear Technical Guide CONTENTS 0 CONTENTS 1.1 Compartments 1/2 1.2 Components of the structure 1/3 1.2.1 Hot-galvanized steel sheet 1/3 1.2.2 Painted steel sheet 1/4 1.2.3 Copper 1/5 1.2.4 Insulating

More information

MESG 12 / 17.5 / 24 / 36 KV

MESG 12 / 17.5 / 24 / 36 KV MESG 12 / 17.5 / 24 / 36 KV Medium Voltage Air Insulated Metal Enclosed Switchgear up to 36 kv- up to 1250 A - up to 25 ka for 1 sec. with SF6 or vacuum circuit breakers. 750 METAL ENCLOSED 1 1 ) GENERAL

More information

UP TO 17,5 kv LSC 2B PM (METAL-CLAD) WITHDRAWABLE VACUUM CIRCUIT BREAKER MEDIUM VOLTAGE CUBICLES

UP TO 17,5 kv LSC 2B PM (METAL-CLAD) WITHDRAWABLE VACUUM CIRCUIT BREAKER MEDIUM VOLTAGE CUBICLES UP TO 17,5 kv LSC 2B PM (METAL-CLAD) WITHDRAWABLE VACUUM CIRCUIT BREAKER MEDIUM VOLTAGE CUBICLES 1 TABLE OF CONTENTS 1. SCOPE 2. GENERAL 2.1 STANDARDS AND REGULATIONS 2.2 OPERATING CONDITIONS 2.3 DOCUMENTATION

More information

Medium voltage products UniSec DY800 New 24 kv air-insulated medium voltage switchgear to e-distribuzione specifications

Medium voltage products UniSec DY800 New 24 kv air-insulated medium voltage switchgear to e-distribuzione specifications Medium voltage products UniSec Y800 New 24 kv air-insulated medium voltage switchgear to e-istribuzione specifications UniSec Y800 ubicles available Unit e-istribuzione specifications (Ed. 4) UniSec IS/1

More information

SWITCHCRAFT. Switchcraft Europe GmbH SWITCHCRAFT

SWITCHCRAFT. Switchcraft Europe GmbH SWITCHCRAFT SWITCHCRAFT Switchcraft Europe GmbH Switchgear Product Overview igis Gas Insulated Switchgear isis Solid Insulated Switchgear icb - Vacuum Circuit Breaker iair - Air insulated switchgear panel Switchcraft

More information

GMA. Medium-voltage switchgear

GMA. Medium-voltage switchgear Medium-voltage switchgear Gas-insulated switchgear up to 24 kv - 2500 A - 31.5 ka Earthing without automatically CLOSE / OPEN of the Circuit Breaker Operation - Maintenance Technical Manual No. AGS 531

More information

ZX-Family Gas-insulated medium voltage switchgear

ZX-Family Gas-insulated medium voltage switchgear ZX-Family Gas-insulated medium voltage switchgear Minimum overall costs ZX offers maximum economy The compact design of the panels reduces the space required and therefore the size of the station. Freedom

More information

SF 6 Gas Insulated Switchgear Type SDH314 / SDHa314 for 72.5 to 145 kv

SF 6 Gas Insulated Switchgear Type SDH314 / SDHa314 for 72.5 to 145 kv Three Phase Encapsulated Type SF 6 Gas Insulated Switchgear Type SDH314 / SDHa314 for 72.5 to 145 kv 06B1-E-0002 Small Space Requirement, High Reliability and Safety ー 72.5 to 145 kv GIS, SDH314/SDHa314

More information

ZX2.2 Gas-insulated medium voltage switchgear

ZX2.2 Gas-insulated medium voltage switchgear ZX2.2 Gas-insulated medium voltage switchgear 2 Brochure ZX2.2 Power engineering from ABB Solutions for the future As a technology group with global operations, ABB supplies the solutions of the future

More information

MEDIUM VOLTAGE PRODUCTS. Powerbloc Pre-assembled modules for building medium voltage switchgear

MEDIUM VOLTAGE PRODUCTS. Powerbloc Pre-assembled modules for building medium voltage switchgear MEDIUM VOLTAGE PRODUCTS Powerbloc Pre-assembled modules for building medium voltage switchgear Powerbloc are the ideal solution for replacing fixed circuit breakers with withdrawable circuit breakers,

More information

MV Air Insulated Switchgear TAP17. Technical Data TGOOD

MV Air Insulated Switchgear TAP17. Technical Data TGOOD MV Air Insulated Switchgear TAP17 Technical Data TGOOD 2017.1 Operating environmental conditions Place of installation: Indoor or outdoor Ambient temperature: 25 ~ +40 (higher or lower temperature optional)

More information

Our brand POWER DYNAMIC PASSION COMMITMENT CREATIVITY. A strong brand for strong products: 8PU Premium. MV Energy

Our brand POWER DYNAMIC PASSION COMMITMENT CREATIVITY. A strong brand for strong products: 8PU Premium. MV Energy Our brand A strong brand for strong products: The ENERGOLINE brand represents our product portfolio of INDUSTRIAL SWITCHGEAR SYSTEMS. Our products are characterized by a high degree of safety, flexibility

More information

KYN28A-12 (GZS1) A.C METALCLAD REMOVABLE SWITCHGEAR FOR INDOOR USE CHINATCS

KYN28A-12 (GZS1) A.C METALCLAD REMOVABLE SWITCHGEAR FOR INDOOR USE CHINATCS KYN28A-12 (GZS1) A.C METALCLAD REMOVABLE SWITCHGEAR FOR INDOOR USE CHINATCS 2001.09 KYN28A-12 (GZS1) A.C Metalclad Removable Switchgear for Indoor Use --------The Leader in Switchgear Up to 12kV 1. The

More information

CGMCOSMOS. Reliable innovation. Personal solutions. Fully gas insulated modular and compact (RMU)system.

CGMCOSMOS. Reliable innovation. Personal solutions. Fully gas insulated modular and compact (RMU)system. MV Switchgear for CGMCOSMOS Fully gas insulated modular and compact (RMU)system Up to 24 kv Up to 27 kv mediumvoltage mediumvoltageag AG Langackerstrasse Langackerstrasse 25 25 CH CH 6330 6330 Cham Cham

More information

B kv Gas-insulated Substations

B kv Gas-insulated Substations 72.5 145 kv Gas-insulated Substations The increasing demand for electrical power in cities and industrial centres requires the installation of a compact and efficient distribution and transmission network.

More information

SWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED)

SWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED) PRODUCED BY THE OPERATIONS DIRECTORATE OF ENERGY NETWORKS ASSOCIATION Issue 3 2012 SWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED) www.energynetworks.org 2012 Energy Networks

More information

Gas-insulated switchgear up to 420 kv, 63 ka, 5000 A Type 8DQ1. siemens.com/energy. Answers for energy.

Gas-insulated switchgear up to 420 kv, 63 ka, 5000 A Type 8DQ1. siemens.com/energy. Answers for energy. Gas-insulated switchgear up to 420 kv, 63 ka, 5000 A Type 8DQ1 siemens.com/energy Answers for energy. Gaining from experience Our switchgear ensures extraordinarily high availability at a low operating

More information

Medium-Voltage Switchgear INSTALLATION AND OPERATING INSTRUCTIONS

Medium-Voltage Switchgear INSTALLATION AND OPERATING INSTRUCTIONS Medium-Voltage Switchgear Type 8DA11 / 8DA12 Fixed-Mounted Circuit-Breaker Switchgear up to 27.5 kv, extendable 1/2-Pole Switchgear for AC Traction Power Supply Medium-Voltage Switchgear INSTALLATION AND

More information

SWITCHGEAR DIVISION PRODUCT PROFILES

SWITCHGEAR DIVISION PRODUCT PROFILES SWITCHGEAR DIVISION PRODUCT PROFILES Metal-Enclosed Load-Interrupter Switchgear Product Profiles Three-Phase, Group-Operated Load-Interrupter Switches with Fuses in Single and Multi-Bay Assemblies Manual,

More information

PIX-H Metal-clad switchgear up to 17.5kV

PIX-H Metal-clad switchgear up to 17.5kV AIR INSULATED SWITCHGEAR PIX-H Metal-clad switchgear up to 17.5kV for high rated applications Technical Specifications AREVA T&D Summary - Technical description... 3 - Standards... 6 - PIX in detail...

More information

SYSclad switchboard equipped with draw out type vacuum circuit breaker closed dooroperationoperation. SYSclad 12 17,5kV A.

SYSclad switchboard equipped with draw out type vacuum circuit breaker closed dooroperationoperation. SYSclad 12 17,5kV A. SYSclad switchboard equipped with draw out type vacuum circuit breaker closed dooroperationoperation 630 3150A SYSclad 12 17,5kV 16 31,5kA Generalities SYSclad is a medium voltage switchboard metal clad

More information

with Vacuum Circuit Breaker HAF

with Vacuum Circuit Breaker HAF M E T A L - C L A D S W I T C H G E A R Safety and Reliability with Vacuum Circuit Breaker HAF Flexible Design and Compact with Vacuum Circuit Breaker HVF Easy Installation and Maintenance We build a better

More information

3AK OPERATING INSTRUCTIONS. Vacuum circuit-breaker module 3AK1 and 3AK3

3AK OPERATING INSTRUCTIONS. Vacuum circuit-breaker module 3AK1 and 3AK3 3AK Vacuum circuit-breaker module 3AK1 and 3AK3 OPERATING INSTRUCTIONS Order no.: 9229 9923 176 0B Ordering location: IC LMV LP PO P C41 AG 09.2013 en Siemens AG 2006. All rights reserved. For your safety

More information

Distributing Power Economically. Totally Integrated Power. Gas-insulated medium-voltage switchgear: safe, compact, and reliable

Distributing Power Economically. Totally Integrated Power. Gas-insulated medium-voltage switchgear: safe, compact, and reliable Totally Integrated Power Distributing Power Economically Gas-insulated medium-voltage switchgear: safe, compact, and reliable www.siemens.com/mediumvoltage Totally Integrated Power (TIP) we bring power

More information

Medium Voltage Metal-Enclosed Switches

Medium Voltage Metal-Enclosed Switches Medium Voltage Metal-Enclosed Switches Outdoor Medium Voltage Switch.1 Medium Voltage Switch MVS Product Description............................................. 2 Application Description..........................................

More information

3 - Protection components Motor circuit-breakers

3 - Protection components Motor circuit-breakers Contents 0 - Protection components Motor circuit-breakers protection components for the motor protection Thermal-magnetic motor circuit-breakers Selection guide..............................................page

More information

Air-insulated medium voltage switchgear metal-enclosed type-tested factory-assembled withdrawable-unit design 12 kv / 24 kv

Air-insulated medium voltage switchgear metal-enclosed type-tested factory-assembled withdrawable-unit design 12 kv / 24 kv Air-insulated medium voltage switchgear metal-enclosed type-tested factory-assembled withdrawable-unit design 12 kv / 24 kv Leukhardt...switch to safety! Version 2.07.EN of 28.11.2011 page 1 of 9 Standards

More information

TECHNICAL SPECIFICATION. UP TO 36 kv METAL-CLAD. With WITHDRAWABLE VACUUM CIRCUIT BREAKER MEDIUM VOLTAGE CUBICLES

TECHNICAL SPECIFICATION. UP TO 36 kv METAL-CLAD. With WITHDRAWABLE VACUUM CIRCUIT BREAKER MEDIUM VOLTAGE CUBICLES TECHNICAL SPECIFICATION UP TO 36 kv METAL-CLAD With WITHDRAWABLE VACUUM CIRCUIT BREAKER MEDIUM VOLTAGE CUBICLES 1 TABLE OF CONTENTS 1. SCOPE 2. GENERAL 2.1 STANDARDS AND REGULATIONS 2.2 OPERATING CONDITIONS

More information

Miniature Circuit-Breakers (MCBs)

Miniature Circuit-Breakers (MCBs) Product Overview Miniature Circuit-Breakers (MCBs) Design Tripping characteristics Rated current I n Rated breaking capacity Power supply company product range 5SP3 E 16 - A Standard product range 5SQ2

More information

Cost-Efficient Solution for Power Distribution. Gas-Insulated Medium-Voltage Switchgear: Safe, Compact and Reliable

Cost-Efficient Solution for Power Distribution.  Gas-Insulated Medium-Voltage Switchgear: Safe, Compact and Reliable www.siemens.com/mediumvoltage Cost-Efficient Solution for Power Distribution Gas-Insulated Medium-Voltage Switchgear: Safe, Compact and Reliable Answers for infrastructure and cities. Contents Gas-insulated

More information

Medium Voltage Distribution PI 100. up to 24 kv Air-insulated circuit-breaker switchgear for primary distribution. System configuration

Medium Voltage Distribution PI 100. up to 24 kv Air-insulated circuit-breaker switchgear for primary distribution. System configuration Medium Voltage Distribution PI 100 up to 24 kv Air-insulated circuit-breaker switchgear for primary distribution System configuration Delivery conditions The General Conditions of Delivery as amended shall

More information

3VF3 to 3VF8 Circuit-Breakers

3VF3 to 3VF8 Circuit-Breakers 3VF3 to 3VF8 Circuit-Breakers Accessories Operating mechanisms For other s for 3VF3 with knob Rotary drive, complete, scope of supply Cubicle door for 3VF6 Motor operating mechanism for 3VF3 Motor operating

More information

BETA Switching Switches and Light Indicators

BETA Switching Switches and Light Indicators Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET

More information

Gas-insulated medium-voltage switchgear. For the mining industry. Answers for energy.

Gas-insulated medium-voltage switchgear. For the mining industry. Answers for energy. Gas-insulated medium-voltage switchgear For the mining industry Answers for energy. Full power even under extreme conditions Reliable All over the world, the demand for mineral resources is increasing.

More information

Metal Clad Switchgears

Metal Clad Switchgears SNC Series Metal Clad Switchgears > up to 36 kv Rated Voltage > up to 2500 A Rated Current > up to 40 ka Rated Short Time Withstand Current > LSC-2B, PM, AFLR > In Confirmity with IEC 62271-1, 100, 102,

More information

Medium Voltage Metal-Enclosed Switches

Medium Voltage Metal-Enclosed Switches Medium Voltage Metal-Enclosed Switches Outdoor Medium Voltage Switch.1 Introduction Product Selection Guide....................................2 Medium Voltage Switch MVS Product Description......................................

More information

AF series contactors (9 2650)

AF series contactors (9 2650) R E32527 R E39322 contactors General purpose and motor applications AF series contactors (9 2650) 3- & 4-pole contactors General purpose up to 2700 A Motor applications up to 50 hp, 900 kw NEMA Sizes 00

More information

11kV Compact Switchgear. tec - range. Minimum to Zero SF6 Insulation Gas. Outec Controls

11kV Compact Switchgear. tec - range. Minimum to Zero SF6 Insulation Gas. Outec Controls 11kV Compact Switchgear tec - range Minimum to Zero SF6 Insulation Gas. Outec Controls 1 tec xx - 11kV Switchgear Contents 1 tec CB - SF6 Free Switchgear... 3 1.1 Description:... 3 1.2 1.3 Features the

More information