ZIPLINE BOOM PACKAGE. Operator s Manual. IM10184 Issue D ated Dec- 13 Lincoln Global, Inc. All Rights Reserved.

Size: px
Start display at page:

Download "ZIPLINE BOOM PACKAGE. Operator s Manual. IM10184 Issue D ated Dec- 13 Lincoln Global, Inc. All Rights Reserved."

Transcription

1 Operator s Manual ZIPLINE BOOM PACKAGE For use with machines having Code Numbers: K4047-XX, K4048-XX Save for future reference Register your machine: Authorized Service and Distributor Locator: Date Purchased Code or K#: (ex: Kxxxx-xx) Serial: (ex: U ) IM10184 Issue D ated Dec- 13 Lincoln Global, Inc. All Rights Reserved.

2 SAFETY WARNING READ AND FOLLOW ALL WARNING INFORMATION IN THIS AND ALL OTHER MANUALS. WARNING FALLING BOOM CAN CAUSE SERIOUS PERSONAL INJURY AND EQUIPMENT DAMAGE Securely attach pallet base or pedestal to floor before operating boom arm. WARNING SPRING UNDER PRESSURE Release of spring pressure can cause serious personal injury and equipment damage. Do not remove spring rod shipping support until boom is completely assembled and all components are installed. Do not service or adjust spring pressure on boom without the spring rod shipping support securely installed. WARNING UNBALANCED BOOM CAN CAUSE SERIOUS PERSONAL INJURY AND EQUIPMENT DAMAGE. Do not remove wire drive unit without the spring rod shipping support securely installed. WARNING MOVING BOOM PARTS CAN CAUSE SERIOUS PERSONNEL INJURY. Keep hands away from spring rod clevis and swivel plates. CAUTION ONLY QUALIFIED PERSONNEL SHOULD INSTALL USE OR SERVICE THIS EQUIPMENT. READ AND FOLLOW THE MANUFACTURERS INSTRUCTIONS AND YOUR EMPLOYER S SAFETY PRACTICES. 2

3 TABLE OF CONTENTS Page Safety Precautions Installation...Section A Product Description A-1 Product Specification A-1 Spring Balanced Single Boom Installation A-2 thru A-5 Hydraulic Boom Installation A-6 Dimension Prints...Section B 8 Ft. Spring Balanced Zipline Boom Assembly B-1 8 Ft. Hydraulic Zipline Boom Assembly B-2 12 Ft. Spring Balanced Zipline Boom Assembly B-3 12 Ft. Hydraulic Zipline Boom Assembly B-4 16 Ft. Spring Balanced Zipline Boom Assembly B-5 16 Ft. Hydraulic Zipline Boom Assembly B-6

4 PRODUCT DESCRIPTION PRODUCT DESCRIPTION This wire feeder boom package comprised of Lincoln equipment will allow you to setup a boom welding system when used in conjunction with Zipline boom products. This boom package includes everything you need from Lincoln to easily setup a standard 8, 12 or 16 Foot feet welding station using the Zipline boom product line. The Lincoln boom packages will include the following items: 1. Wire Drive Assembly 2. Control Box Assembly 3. Pallet Base (Optional) 4. Boom Arm Assembly 5. Pedestal 6. Mast Assembly 7. 8 Linc-Net Cable 8. Polymer Weld Wire Conduit (1 per Head) 9. Spindle Assembly (1 per Head) 10. Hardware Kit 11. Conduit Bracket (1 per Head) 12. Gun Control Plug Cable Assembly (1 per Head) 13. Wire Feeder Instruction Manual 14. Boom Package Instruction Manual PRODUCT SPECIFICATIONS Product Number K4047-8S K4047-8H K S K H K S K H K4048-8D K4048-8H K D K H K D K H Product Description PF-84 Single Boom Package, 8FT PF-84 Single Hydraulic Boom Package, 8FT PF-84 Single Boom Package, 12FT PF-84 Single Hydraulic Boom Package, 12FT PF-84 Single Boom Package, 16FT PF-84 Single Hydraulic Boom Package, 16FT PF-84 Dual Boom Package, 8FT PF-84 Dual Hydraulic Boom Package, 8FT PF-84 Dual Boom Package, 12FT PF-84 Dual Hydraulic Boom Package, 12FT PF-84 Dual Boom Package, 16FT PF-84 Dual Hydraulic Boom Package, 16FT A-1

5 INSTALLATION BOOM INSTALLATION INSTALL THE BOOM ARM ASSEMBLY INSTALL THE PEDESTAL 1. Pallet Base (Optional) 2. 3/4-10 x 1.5 Bolts 3. Pedestal 3 5. Boom Arm Assembly 6. 3/4-10 X 3.5 Bolt 7. Plain Washer 8. Lock Nut 2 1 Mount the pedestal assembly on the pallet base using the (4) 3/4-10 x 1.5 bolts, nuts and washers provided. If a pallet base is not used, mount the pedestal directly to a solid concrete floor. Use (4) 3/4 concrete anchors (not provided) with washers. INSTALL THE MAST ASSEMBLY Remove the friction knob from top of the mast. Place the swivel sailin plate on the rear boom arm between the two mounting plates on the top of the mast assembly. Install the main swivel pin first. Place 2 plain washers under the head of the bolt and 2 under the lock nut. Tighten the lock nut completely and then back the lock nut off 1 full turn for the main swivel pin, back the lock nut 2 full turn off for the clevis swivel pin. Re-install the friction control knob. 4. Mast Assembly GREASE BOTTOM PIPE HERE { 4 Coat the bottom pipe with grease. Put mast assembly into pedestal. A-2

6 INSTALLATION INSTALL THE CONDUIT BRACKET INSTALL THE SPINDLE ASSEMBLY (OPTIONAL) 9. Conduit Bracket 10. 1/4-20 x.75 Bolt 11. 1/4 Plain Washer 12. 1/4 Lock Washer 13. 1/4-20 HHN Bracket AD Bulkhead Adapter Block AD Quick Disconnect AD Spindle Assembly 18. Friction Washer 19. Plain Washer 20. Lock Washer 21. 1/2-13 x 3.5 Bolt Install the conduit bracket assembly to the mast using 1/4-20 x.75 bolts, washers and nuts provided. Place 1 plain washer under the head of the bolt and 1 under the lock washer. Line up the small holes on the bracket with the mounting holes on the mast. After the bracket is in place, completely tighten the bolt. Install bracket, bulkhead adapter and quick disconnect to conduit bracket. Repeat this step for the opposite side if necessary. Remove origin.625 bolt from the Spindle Assembly. Place 2 additional friction washers under the spindle. Install the spindle assembly using the 1/2-13 x 3.50 bolt and washers provided. Line up the small hole on the spindle assembly with the roll pin on the mast. After the spindle assembly is in place, completely tighten the bolt. Repeat this step for the opposite side if necessary. A-3

7 INSTALLATION INSTALL THE WIRE CONDUIT INSTALL THE WIRE DRIVE ASSEMBLY 22. Polymer Weld Wire Conduit 24. 5/16-18 X.75 HHCS 25. 5/16 Lock Washer 26. 5/16 Plain Washer Mount conduit through cable trough. Connect the conduit to quick disconnect. INSTALL THE INLET GUIDE 16. Quick Disconnect AD Wire Feeder 24. Inlet Guide AD Install the wire drive assembly using the (4) 5/16-18 x.75 bolts and washers provided. Screw the bolts and washers partially into the bottom of the wire drive assembly before placing the wire drive assembly onto the feeder mount bracket and cage assembly. After the wire drive assembly is in place, completely tighten the bolts. Connect the wire drive to control cable, weld cable, gas hose and wire conduit. INSTALL THE CONTROL BOX 27. Control Box Assembly Remove original inlet guide from wire feeder. Install Inlet Guide AD and quick disconnect. Repeat this step for the opposite side if necessary. Unscrew the (4) 1/4-20 x.75 bolts partially. Place the control box assembly onto the control box support. Connect the control box to control cable. A-4

8 INSTALLATION REMOVE THE SPRING ROD SHIPPING SUPPORT Once all the welding equipment is installed, pull down on the feeder end and test the amount of force acting on the boom. If the boom arm immediately springs back against the spring rod shipping support or if the feeder has already drooped downward without additional force, then the spring assembly must be rebalanced. See Boom Balancing Instructions steps 1 thru 6. If the boom arm can be pulled down and it stays in place or slightly creeps upward the spring rod shipping support can now be removed. Place it on the provided holder on the mast top or in a handy location. 28. Red Spring Rod INSTALL THE GUN AND CABLE ASSEMBLIES Install the provided gun control plug cable assemblies to the front of the wire drive assembly. Install the gun and cable assemblies per the instruction manual provided with the gun. Gun adapters may be required if using a Non-Lincoln gun. INSTALL THE WELDING POWER SOURCE Install the welding power source per the instruction manual provided with the power source. Install the user provided electrode work cable between the power source and work piece. Tighten all connections completely to ensure a good electrical connection. NOTE: The electrode weld cables provided with the wire feeder boom package is rated for % duty cycle. If operating above this rating, an additional cable should be used in parallel with the cable provided. Loosen the friction control knob until the desired boom balance is obtained. Again if the boom does not balance as desired, follow the provided boom balancing instructions. But only after reinstalling the spring rod shipping support. BOOM BALANCED INSTRUCTION 1. Re-install the red spring rod shipping support between the top of the spring retainer housing and the nut at the bottom of the clevis on the spring rod. 2. Remove the spring retainer cap at the bottom of the spring retainer housing by removing the four bolts which hold the spring retainer cap onto the spring retainer housing. 3. Loosen the locking nut on the end of the spring rod. Loosen the locking nut enough to permit loosening or tightening of the adjusting nut which is the nut held in place by the locking nut. 4. If the boom has a tendency to drift downward after being pushed up, it will be necessary to increase the spring compression by tightening the adjusting nut mentioned in step 3. If the boom has a tendency to drift upward, it will be necessary to decrease the spring compression by loosening the adjusting nut mentioned in step After making the above adjustments, do the following: a. Re-tighten the locking nut loosened in step 3. b. Loosen the friction control knob. c. Remove the spring rod shipping support installed in step 1. d. Pull the boom down to a position which is horizontal, using a rope of suitable strength. Loosen the grip on the rope enough to see whether or not the boom is balanced. The best condition of balance is obtained when the boom rises an inch or so when the pull on the rope is loosened. e. Tighten the friction control knob to control this slight upward movement. 6. Re-install the spring retainer cap removed in step 2. A-5

9 INSTALLATION HYDRAULIC BOOM INSTALLATION 1. Install the pedestal on the optional pallet base with the provided 3/4 x 2 bolts and hardware. The pallet should be some secured to the floor using, at minimum, a lash style system to prevent tipping. If the unit will be mounted directly to shop floor, mount the pedestal using at least 3/4 diameter concrete anchors. Standard floor mounting company procedures should be followed Insert the machine end of the mast into the pedestal and insert grease into the two zerks on the pedestal. Rotate the mast to coat the inside of the pedestal pipe and insure the mast turns smoothly. GREASE BOTTOM PIPE HERE { 3. Insert the boom between the two uprights of the mast top and line up the axle holes. We recommend that at least to people involve themselves in this operation. Insert the provided 3/4 x 7 axle pin through the mast and boom and secure with the hitch pin. The washers should be between the hitch pin and upright. BOOM 3/4 x 7 axle pin Two uprights 4. Install the jack using the 1/2 bolt to fasten to the mast mount and the 3/4 pins with hitch pins mounting the jack to the bottom of the boom. 1/2 bolts to mast 3/4 pins to mount jack to bottom end of boom 5. Install the safety device using the provided pins, top and bottom, outside the jack toward the feeder end of the boom. 6. Insure that the jack raises the boom assemble using the supplied handle. The safety device will automatically expand to length as the boom is raised. Using the handle, relieve the pressure on the jack, WHILE holding pressure on the safety device s pipe clamp tabs. This will allow the unit to drop until desired elevation is reached. 7. Mount feeder support and control box mount to boom and mast using the provided 3/8 bolts. (See Spring Boom Mounting for graphics in this Instruction Manual) 8. Mount the conduit bracket on the mast where the wire reel will mount. (See Spring Boom Mounting for graphics in this Instruction Manual) A-6

10 DIMENSION 8 FT. SPRING BALANCED ZIPLINE BOOM ASSEMBLY Ø HOLE FOR 3/4" BOLTING (4 PLACES) MAST PEDESTAL DETAIL R 96.0 (R 8'-0") 96.0 (8'-0") (9'-10") 87.0 (7'-3") N.A. N.A. BOOM ADJUSTS FROM THE HORIZONTAL POSTION UPWARD 50 TO DOWNWARD A.01 L16609 B-1

11 DIMENSION 8 FT. HYDRAULIC ZIPLINE BOOM ASSEMBLY MAST PEDESTAL DETAIL Ø HOLE FOR 3/4" BOLTING (4 PLACES) R96.0 (8'-0") (9'-8") 96.0 (8'-0") 85.0 (7'-1") N.A. N.A. BOOM ADJUSTS FROM THE HORIZONTAL POSTION UPWARD 50 TO DOWNWARD A.01 L16610 B-2

12 DIMENSION 12 FT. SPRING BALANCED ZIPLINE BOOM ASSEMBLY Ø HOLE FOR 3/4" BOLTING (4 PLACES) MAST PEDESTAL DETAIL R (R 12'-0") (13'-10") (12'-0") (11'-3") N.A. N.A. BOOM ADJUSTS FROM THE HORIZONTAL POSTION UPWARD 50 TO DOWNWARD B.01 L10772 B-3

13 DIMENSION 12 FT. HYDRAULIC ZIPLINE BOOM ASSEMBLY Ø HOLE FOR 3/4" BOLTING (4 PLACES) MAST PEDESTAL DETAIL R (12'-0") (13'-8") (12'-0") (11'-1") N.A. N.A. BOOM ADJUSTS FROM THE HORIZONTAL POSTION UPWARD 50 TO DOWNWARD B.01 L10828 B-4

14 A ZIPLINE BOOM PACKAGE DIMENSION 16 FT. SPRING BALANCED ZIPLINE BOOM ASSEMBLY Ø HOLE FOR 3/4" BOLTING (4 PLACES) R (R 16'-0") (17'-10") (16'-0") (15'-3") B.01 L10773 A N.A. A A MAST PEDESTAL DETAIL 7.75 N.A. BOOM ADJUSTS FROM THE HORIZONTAL POSTION UPWARD 50 TO DOWNWARD B-5

15 DIMENSION 16 FT HYDRAULIC ZIPLINE BOOM ASSEMBLY Ø HOLE FOR 3/4" BOLTING (4 PLACES) MAST PEDESTAL DETAIL B.01 L10829 A R (16'-0") (17'-8") (16'-0") (15'-1") N.A. N.A. BOOM ADJUSTS FROM THE HORIZONTAL POSTION UPWARD 50 TO DOWNWARD B-6

16 CUSTOMER ASSISTANCE POLICY The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer s particular purpose, with respect to such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products. Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements. Subject to Change This information is accurate to the best of our knowledge at the time of printing. Please refer to for any updated information.

Inverter Welding System

Inverter Welding System POWER WAVE 455/STT AND POWER FEED 10 DUAL Inverter Welding System NEW! POWER WAVE 455/STT AND POWER FEED 10 DUAL ADVANTAGE LINCOLN HIGHEST PERFORMANCE SYSTEM Superior STT, pulsed GMAW and FCAW welding

More information

LN-9 AND LN-9 GMA. Semiautomatic Wire Feeders THE WELDING EXPERTS

LN-9 AND LN-9 GMA. Semiautomatic Wire Feeders THE WELDING EXPERTS LN-9 AND LN-9 GMA Semiautomatic Wire Feeders THE WELDING EXPERTS LN-9 AND LN-9 GMA LN-9 GMA shown with CV-655 power source, K1524-1 universal wire reel stand, K1504-1 50/60 lb. coil adapter, K163 undercarriage

More information

LF-72 and LF-74 Wire Feeders

LF-72 and LF-74 Wire Feeders SEMIAUTOMATIC WIRE FEEDERS LF-72 and LF-74 Wire Feeders 2-Roll or 4-Roll Heavy Duty Industrial Feeders Designed for MIG and cored wire welding in job shop and manufacturing environments, the rugged LF-72

More information

CrossLinc TECHNOLOGY FULL CONTROL. FEWER CABLES.

CrossLinc TECHNOLOGY FULL CONTROL. FEWER CABLES. CrossLinc TECHNOLOGY FULL CONTROL. FEWER CABLES. CrossLinc Technology: Solving Site Welding Issues Worker safety, weld quality, productivity and equipment reliability come to mind when welding on site

More information

POWER MIG 210 MP MULTI-PROCESS WELDING MACHINE

POWER MIG 210 MP MULTI-PROCESS WELDING MACHINE POWER MIG 210 MP MULTI-PROCESS WELDING MACHINE Versatile, Rugged, Simple to Use. The POWER MIG 210 MP power supply is a multi-process welder for the hobbyist, educator or small contractor who wants to

More information

POWER MIG 260 FABRICATION SIMPLIFIED

POWER MIG 260 FABRICATION SIMPLIFIED POWER MIG 260 FABRICATION SIMPLIFIED Fabrication Simplified The POWER MIG 260 welding machine sets the standard for MIG and Flux-Cored welding in light industrial shop fabrication, maintenance, and repair

More information

LF-72 AND LF-74 WIRE FEEDERS

LF-72 AND LF-74 WIRE FEEDERS LF-72 AND LF-74 WIRE FEEDERS Shown with options: See page 4 for all models ISO 9001:2000 14001:2004 2-ROLL OR 4-ROLL HEAVY DUTY INDUSTRIAL FEEDERS Designed for MIG and cored wire welding in job shop and

More information

Description. Order TECHNICAL SPECIFICATIONS

Description. Order TECHNICAL SPECIFICATIONS SEMIAUTOMATIC WIRE FEEDERS Semiautomatic, Constant Speed Wire Feeders The are semiautomatic constant speed wire feeders that provide dependable performance and reliable operation, making them ideal for

More information

LF-72 and LF-74 Wire Feeders

LF-72 and LF-74 Wire Feeders SEMIAUTOMATIC WIRE FEEDERS LF-72 and LF-74 Wire Feeders Processes MIG, Pulsed MIG, Flux-Cored Product Number LF-72 LF-74 See page 6 for specs on all models Input Power 24-42 VAC 50/60 Hz 9 Amps Rated Output

More information

CROSSLINC TECHNOLOGY FULL CONTROL. FEWER CABLES.

CROSSLINC TECHNOLOGY FULL CONTROL. FEWER CABLES. CROSSLINC TECHNOLOGY FULL CONTROL. FEWER CABLES. CrossLinc Technology Solving Site Welding Issues Worker safety, weld quality, and productivity come to mind when welding on site or on large structures.

More information

LF-72 and LF-74 Wire Feeders

LF-72 and LF-74 Wire Feeders SEMIAUTOMATIC WIRE FEEDERS LF-72 and LF-74 Wire Feeders Processes MIG, Pulsed MIG, Flux-Cored Product Number LF-72 LF-74 See page 6 for specs on all models Input Power 24-42 VAC 50/60 Hz 9 Amps Rated Output

More information

Power Feed 10R. Compact Wire Drive System for Automation. Processes. Description. Recommended General Options. Advantage Lincoln

Power Feed 10R. Compact Wire Drive System for Automation. Processes. Description. Recommended General Options. Advantage Lincoln AUTOMATIC WIRE FEEDERS Power Feed 10R Compact Wire Drive System for Automation The is a high performance, digitally controlled wire feeder designed to be a part of a modular, multi-process welding system.

More information

INDUSTRIAL WIRE FEEDERS FLEX FEED 74 HT, FLEX FEED 84 AND POWER FEED 84

INDUSTRIAL WIRE FEEDERS FLEX FEED 74 HT, FLEX FEED 84 AND POWER FEED 84 INDUSTRIAL WIRE FEEDERS FLEX FEED 74 HT, FLEX FEED 84 AND POWER FEED 84 Flex Feed 74 HT Available Dual Drive Models Available Boom Mount Models RUGGED, RELIABLE AND READY Flex Feed and Feed Wire Feeders

More information

FLEXTEC MULTI-PROCESS WELDERS FLEXTEC 350X, 500, 500P, 650

FLEXTEC MULTI-PROCESS WELDERS FLEXTEC 350X, 500, 500P, 650 FLEXTEC MULTI-PROCESS WELDERS FLEXTEC 350X, 500, 500P, 650 It Doesn t Get Much Simpler Than FLEXTEC. Out on the construction jobsite or in most fabrication shops, it pays to keep it simple. The Flextec

More information

DUAL VANTAGE 800 ENGINE-DRIVEN WELDER/GENERATOR

DUAL VANTAGE 800 ENGINE-DRIVEN WELDER/GENERATOR DUAL VANTAGE 800 ENGINE-DRIVEN WELDER/GENERATOR The Power of Two On the construction site, along the pipeline or in any other rugged environment, welding must get done on time and with minimal rework.

More information

SAE-500 Severe Duty ENGINE-DRIVEN WELDER / GENERATOR

SAE-500 Severe Duty ENGINE-DRIVEN WELDER / GENERATOR SAE-500 Severe Duty ENGINE-DRIVEN WELDER / GENERATOR Superior Choice for Critical Welds SAE-500 Severe Duty is the preferred choice for its great arc performance, design simplicity, reliability and ruggedness!

More information

THE AUTOWELD SYSTEM. Automated Pipe Welding System. High Productivity

THE AUTOWELD SYSTEM. Automated Pipe Welding System. High Productivity THE AUTOWELD SYSTEM Automated Pipe Welding System High Productivity THE AUTOWELD SYSTEM The System is so simple, with just a few quick connections you re ready to weld! You re probably wondering how that

More information

FLEXTEC MULTI-PROCESS WELDERS FLEXTEC 350X, 500, 500P, 650

FLEXTEC MULTI-PROCESS WELDERS FLEXTEC 350X, 500, 500P, 650 FLEXTEC MULTI-PROCESS WELDERS FLEXTEC 350X, 500, 500P, 650 It Doesn t Get Much Simpler Than FLEXTEC. Out on the construction jobsite or in most fabrication shops, it pays to keep it simple. The Flextec

More information

DUAL VANTAGE 800-I ENGINE-DRIVEN WELDER/GENERATOR

DUAL VANTAGE 800-I ENGINE-DRIVEN WELDER/GENERATOR DUAL VANTAGE 800-I ENGINE-DRIVEN WELDER/GENERATOR The Power of Two On the construction site, along the pipeline or in any other rugged environment, welding must get done on time and with minimal rework.

More information

MULTI-PROCESS POWER FOR HEAVY DUTY APPLICATIONS

MULTI-PROCESS POWER FOR HEAVY DUTY APPLICATIONS FLEXTEC 650X MULTI-PROCESS POWER FOR HEAVY DUTY APPLICATIONS Shown: K3425-1 SIMPLE. RELIABLE. FLEXIBLE. This multi-process welder delivers up to 815 amps of welding power for a variety of applications,

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS ENGINE DRIVEN WELDER Diesel Engine Driven Welder Manual Processes For demanding jobs that call for high amperage capabilities, the offers 400 amps for DC stick welding and 3,000 watts of AC power. Designed

More information

K Model Shown. (1) With CV Adapter. TECHNICAL SPECIFICATIONS

K Model Shown. (1) With CV Adapter. TECHNICAL SPECIFICATIONS ENGINE DRIVEN WELDER Diesel Engine Driven Welder Manual Processes For demanding jobs that call for high amperage capabilities, the offers 400 amps for DC stick welding and 3,000 watts of AC power. Designed

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS Multi-WeldTM 350 MULTI-OPERATOR Connect Several DC+ Welders to One Power Supply. The is a 350 amp, DC+, 100% duty cycle welder capable of CV-wire, CC-stick or arc gouging. With its high efficiency, the

More information

FUME DOESN T STAND A CHANCE

FUME DOESN T STAND A CHANCE FUME DOESN T STAND A CHANCE WELD FUME CONTROL Top Image: Statiflex 200-M Dual Arm with Fan Units and Extraction Arms Bottom Image: Statiflex 400-MS with Extraction Arm and Fan Unit Statiflex Wall-Mounted

More information

LINC GUN THE ULTIMATE MIG GUNS

LINC GUN THE ULTIMATE MIG GUNS LINC GUN THE ULTIMATE MIG GUNS STICK GUNS AND WELDERS TORCHES LINC GUN The ultimate MIG guns Complete range to support all your welding applications. High quality rugged product build according to Lincoln

More information

SIRIOCOPT. A new handle that changes everything.

SIRIOCOPT. A new handle that changes everything. SIRIOCOPT A new handle that changes everything www.saf-fro.com SIRIOCOPT SIRIOCOPT is the new ergonomic and innovative cutting blowpipe designed and produced by our Verona Plant. This patented design makes

More information

PRO Robotic Guns. Thru-Arm Torch Current Range: 550A Duty Cycle: 100% Wire Diameter:.035-5/64 in. ( mm) APPLICATIONS

PRO Robotic Guns. Thru-Arm Torch Current Range: 550A Duty Cycle: 100% Wire Diameter:.035-5/64 in. ( mm) APPLICATIONS Magnum PRO Robotic Guns ACCESSORIES Processes MIG, MIG Pulsed, Flux-Cored Product Number See chart below Thru-Arm Torch Current Range: 550A Duty Cycle: 00% Wire Diameter:.035-5/64 in. (0.9-2.0 mm) External

More information

LINCOLN ENVIRONMENTAL SYSTEMS

LINCOLN ENVIRONMENTAL SYSTEMS LINCOLN ENVIRONMENTAL SYSTEMS Low-Vacuum Solutions ProSource LV s ProSource LOW VACUUM SOLUTIONS PAGE NO. MOBILE SYSTEMS Mobiflex 100-NF Portable Fan...3 Mobiflex 200-M: Mobile Fan, Filtration & Extraction

More information

SAE-400 Processes Stick, TIG, Flux-Cored (1), Gouging (1) With CV Adapter.

SAE-400 Processes Stick, TIG, Flux-Cored (1), Gouging (1) With CV Adapter. SAE-400 Processes Stick, TIG, Flux-Cored (1), Gouging (1) With CV Adapter. Product Number K1278-14 K1278-10 See back page for complete specs Output Range 80-575A DC Welding 3000 Watts AC Generator Rated

More information

DIGIPULS III 320C DIGISTEEL III 320C

DIGIPULS III 320C DIGISTEEL III 320C DIGIPULS III 320C DIGISTEEL III 320C Innovative and powerful MIG/MAG machine with integrated feeder www.saf-fro.com DIGIPULS III 320C - DIGISTEEL III 320C Modest in size, but with everything a big machine

More information

Precision TIG 375. The Power To Perform! Advantage Lincoln TIG WELDERS. Output. Input 1 PHASE. Publication E /05

Precision TIG 375. The Power To Perform! Advantage Lincoln TIG WELDERS. Output. Input 1 PHASE. Publication E /05 TIG WELDERS Precision TIG 375 The Power To Perform! The Precision TIG TM 375 delivers the Power to Perform setting a new standard in Square Wave Technology. Combining outstanding value-added features and

More information

AUTOMATION SOLUTIONS THAT MEET THE MOST DEMANDING REQUIREMENTS YOURS.

AUTOMATION SOLUTIONS THAT MEET THE MOST DEMANDING REQUIREMENTS YOURS. AUTOMATION SOLUTIONS THAT MEET THE MOST DEMANDING REQUIREMENTS YOURS. CAR-W GREATLY SIMPLIFYING AUTOMATED WELDING ABOUT CAR-W Our Challenge. Constant programming for high mix/ low volume part production

More information

INSTALLATION AND MAINTENANCE MANUAL FORM #PM-126 REV A 12/09

INSTALLATION AND MAINTENANCE MANUAL FORM #PM-126 REV A 12/09 HAND CRANK & MOTORIZED POWER CORD REELS: SERIES 1125PC SERIES: 1125PC HAND CRANK SERIES: 1125PC MOTORIZED COXREELS The technical data and images which appear in this manual are for informational purposes

More information

12-1/4 x 3-1/2 Electric Wheel Brake

12-1/4 x 3-1/2 Electric Wheel Brake 12-1/4 x 3-1/2 Electric Wheel Brake A-216 819-0244 Installation Instructions An Altra Industrial Motion Company Contents Dimensions.... 2 Technical Specifications.... 3 Installation Instructions General....

More information

Air-Assist Service Jack Max. Capacity: 10 Tons

Air-Assist Service Jack Max. Capacity: 10 Tons Form No. 565786 Parts List & Operating Instructions for: 1511B Air-Assist Service Jack Max. Capacity: 10 Tons 109 67 66 68 77 69 70 78 95 94 107 106 108 26 71 72 72 93 X L 65 75 92 91 90 89 88 87 86 85

More information

Universal Anchoring. Serrated Double Bolt Jaw Users Manual. April 2016 by Vehicle Service Group. All rights reserved. CO9722.1

Universal Anchoring. Serrated Double Bolt Jaw Users Manual. April 2016 by Vehicle Service Group. All rights reserved. CO9722.1 Universal Anchoring Serrated Double Bolt Jaw Users Manual April 2016 by Vehicle Service Group. All rights reserved. CO9722.1 IN20780 Rev. - 4/27/2016 CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief

More information

Fitting Instruction for EZI-GRIP Bike Rack

Fitting Instruction for EZI-GRIP Bike Rack Fitting Instruction for EZI-GRIP Bike Rack Congratulations on purchasing Ezi-Grip to carry your valued bicycles. We are sure you will get many years of enjoyable use from your Ezi-Grip Bike Rack. These

More information

Trailer Jack Lb. Ring Mount. Assembly & Operating Instructions.

Trailer Jack Lb. Ring Mount. Assembly & Operating Instructions. 2000 Lb. Ring Mount Trailer Jack Model 41006 Assembly & Operating Instructions www.harborfreight.com Copyright 1999 by Harbor Freight Tools. All Rights Reserved. No portion of this manual or any artwork

More information

Description. Order TECHNICAL SPECIFICATIONS

Description. Order TECHNICAL SPECIFICATIONS MULTI-PROCESS WELDERS Idealarc DC-600 Rugged Multi-Process Power for Industrial Manufacturing If your operations include semiautomatic manufacturing or fabrication, your best welding power source selection

More information

Assembly & Operator s Manual

Assembly & Operator s Manual Assembly & Operator s Manual LiftGator XTR 1200lbs Removable Liftgate TM Visit our website at: www.liftgator.com WARNING: Read the entirety of this manual before using the LiftGator. Failure to do so can

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS AUTOMATED SOLUTIONS Tandem MIG Process Increased Production Tandem MIG is a dual wire, high productivity GMAW process designed for flexible robotic or fixed hard automation welding applications. The process

More information

Operation and Safety Manual

Operation and Safety Manual Barrel Handler Operation and Safety Manual EZ SPOT UR Inc. 803 25 th St. N Fargo, ND 58102 Toll Free: 877 433 5733 Phone: 701 282 2772 Fax: 701 277 4625 Table of Contents Safety Symbols & Equipment Signs...

More information

LF-72 PARTS LIST FOR RETURN TO MAIN INDEX

LF-72 PARTS LIST FOR RETURN TO MAIN INDEX Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-501 RETURN TO MAIN INDEX PARTS LIST FOR P-501 P-501-A P-501-A ILLUSTRATION

More information

FRONT DRIVELINE MODIFICATION MAY BE NECESSARY!!!!

FRONT DRIVELINE MODIFICATION MAY BE NECESSARY!!!! INSTALLATION INSTRUCTIONS FOR 2009 DODGE 2500/3500 4WD & 1500 Mega Cab 6 SUSPENSION SYSTEM PART NUMBER 7206 Requires the following parts (sold separately) for a complete installation: Front Coil Spring

More information

RANGER WD/4WD KIT PACKING SLIP

RANGER WD/4WD KIT PACKING SLIP RANGER +2.5 2WD/4WD KIT PACKING SLIP DYNAMICS Thank you for puchasing our long travel kit. We pride ourselves on designing and fabricating our parts in our shop located in Las Vegas, Nevada. If you have

More information

KidWalk KidWalk II Dynamic Mobility System

KidWalk KidWalk II Dynamic Mobility System OWNER S MANUAL KidWalk KidWalk II Dynamic Mobility System Manufactured By Prime Engineering A Division of Axiom Industries, Inc. Supplier Info 70111KWOM 2 TABLE OF CONTENTS This owner s manual is organized

More information

INSTALLATION INSTRUCTIONS FOR FORD 4WD SUPER DUTY 6 SUSPENSION SYSTEM

INSTALLATION INSTRUCTIONS FOR FORD 4WD SUPER DUTY 6 SUSPENSION SYSTEM INSTALLATION INSTRUCTIONS FOR 1999-2004 FORD 4WD SUPER DUTY 6 SUSPENSION SYSTEM Requires the following parts for a complete installation: Front Leaf Springs P/N 60SD6 Hardware Kit P/N 6000H Vehicle specific

More information

FOR WALL MOUNT COMBINATION ARMS

FOR WALL MOUNT COMBINATION ARMS INSTALLATION MANUAL FOR WALL MOUNT COMBINATION ARMS LIGHT DUTY ARMS HEAVY DUTY ARMS KEYBOARD TRAY VERSION Weight Capacity 4-20 lbs KEYBOARD TRAY VERSION Weight Capacity 8-40 lbs WORKSTATION VERSION Weight

More information

Part Number Mini Linear Lift Assembly Installation & Operator s Instruction Manual

Part Number Mini Linear Lift Assembly Installation & Operator s Instruction Manual Part Number 39644 Mini Linear Lift Assembly Installation & Operator s Instruction Manual April 1999 MV1505C Chore-Time Warranty Mini Linear Lift Assembly Manual Chore-Time Warranty Chore-Time Equipment

More information

High Lift Transmission Jack Max. Capacity: kg (1,000 lbs.)

High Lift Transmission Jack Max. Capacity: kg (1,000 lbs.) 655 EISENHOWER DRIVE OWATONNA, MN 55060-0995 USA PHONE: (507) 455-7000 TECH. SERV.: (800) 533-6127 FAX: (800) 955-8329 ORDER ENTRY: (800) 533-6127 FAX: (800) 283-8665 INTERNATIONAL SALES: (507) 455-7223

More information

ATD Gallon Pressurized Oil Drain Owner s Manual

ATD Gallon Pressurized Oil Drain Owner s Manual ATD-5203 30 Gallon Pressurized Oil Drain Owner s Manual TECHNICAL SPECIFICATIONS Model: ATD-5203 Capacity: 30 Gallon Drain Funnel Working Height: 47.25 to 70.5 Drain Funnel Diameter: 15.75 Plastic Tray:

More information

!"" #$% "!&' ( ( ) *

! #$% !&' ( ( ) * !"" #$% "!&' (( ) * FunPop Assembly Manual Model # 2649CR Part No. 59406CR Revised: October 2004 Cincinnati, OH 45241-4807 USA INSTALLATION INSTRUCTIONS Checking Shipment Unpack carton and check thoroughly

More information

Assembly Instructions

Assembly Instructions TOOLS REQUIRED: _(2) 3/4 wrenches _7/16 wrench _3/8 wrench _5/16 allen wrench Display/work stand is for assembly procedure only. May be purchased separately. CONTENTS (PARTS & HARDWARE) _(1) Receiver tube

More information

Operating Instructions and Parts Manual SLT-330F Scissor Lift Table

Operating Instructions and Parts Manual SLT-330F Scissor Lift Table Operating Instructions and Parts Manual SLT-330F Scissor Lift Table For serial no. 17020001 and higher JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-140771 Ph.: 800-274-6848 Revision C

More information

: 1250 gpm in the deck mode : 800 gpm while operating in the ground base - Dual Inlet : 1000 gpm while operating in the ground base - Single Inlet

: 1250 gpm in the deck mode : 800 gpm while operating in the ground base - Dual Inlet : 1000 gpm while operating in the ground base - Single Inlet APOLLO HI-RISER MONITOR STYLE 3433/3431 INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS The following is intended to provide the basic instructions for installation, operation and maintenance of

More information

2-300 SERIES Endover Rotator Operator s Manual for Morse End-Over-End Drum Rotators Series

2-300 SERIES Endover Rotator Operator s Manual for Morse End-Over-End Drum Rotators Series Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Machine Description................... 2 Operating Instructions....................

More information

Aluminum Drive Roll Kits

Aluminum Drive Roll Kits Aluminum Drive Roll Kits KP1507 Series IM14 October, 1997 INSTALLATION INSTRUCTIONS Table of Contents Safety.................................1 General Description......................1 Contents of Kit...........................2

More information

SPECIFICATIONS CONTENTS: Specifications Warning Information. Operating Instructions Preventative Maintenance and Troubleshooting

SPECIFICATIONS CONTENTS: Specifications Warning Information. Operating Instructions Preventative Maintenance and Troubleshooting Model 3322 22 Ton Air/Hydraulic Truck Axle Jack OWNER'S MANUAL CONTENTS: Page 1 Page 2 Page 3-4 Page 4-5 Page 5 Page 6 Page 7 Page 8 Specifications Warning Information Assembly Operating Instructions Preventative

More information

SETUP, PARTS & MAINTENANCE MANUAL 2 BAG CATCHER

SETUP, PARTS & MAINTENANCE MANUAL 2 BAG CATCHER SETUP, PARTS & MAINTENANCE MANUAL 2 BAG CATCHER MODELS: 970338 2 BAG CATCHER, 36 970339 2 BAG CATCHER, 42 970340 2 BAG CATCHER, 48 970341 2 BAG CATCHER, 52 WARNING: If incorrectly used this machine can

More information

Commander Series Grille Guard

Commander Series Grille Guard 1 K Commander Series Grille Guard - Alpha Series Bumpers 2 Commander Grille Guard Pocket Centers 37.6 in. 42 in. - Contents - Kit Numbers. (3) - Introduction. (4) - Safety... (5) - Grille Guard Preparation......

More information

Exhaust System Installation for Corvette, C6 or Z06 PN s , 11811, 11812, 11814, 11815, 11816, 11917

Exhaust System Installation for Corvette, C6 or Z06 PN s , 11811, 11812, 11814, 11815, 11816, 11917 Exhaust System Installation for Corvette, C6 or Z06 PN s - 11810, 11811, 11812, 11814, 11815, 11816, 11917 ***** Please compare the parts in the box with the bill of materials provided ***** to assure

More information

MODEL NO & UP MODEL NO & UP MODEL NO & UP MODEL NO & UP MODEL NO.

MODEL NO & UP MODEL NO & UP MODEL NO & UP MODEL NO & UP MODEL NO. 9-0688 MODEL NO. 00-800 & UP MODEL NO. 0-800 & UP MODEL NO. 5-800 & UP MODEL NO. -800 & UP MODEL NO. 0-800 & UP SKID SPRAYER with the Centrifugal Pump FORM NO. 95-9095 SET-UP AND PARTS CATALOG SAFETY AND

More information

12110BESTPLACE CINCINNATI,OHIO PHONE FAX

12110BESTPLACE CINCINNATI,OHIO PHONE FAX 20BESTPLACE CINCINNATI,OHIO 4524 PHONE 8002262238 FAX 533265427 www.venturo.com TABLE OF CONTENTS VC500FB OWNER'S MANUAL SECTION 00 CEV46 CEV62 DESCRIPTION & SPECIFICATIONS DIMENSIONS AND CAPACITIES WIRE

More information

MS2200, MS2500, and MS3000 Suspension Installation Manual ON/OFF HIGHWAY SUSPENSION SYSTEM

MS2200, MS2500, and MS3000 Suspension Installation Manual ON/OFF HIGHWAY SUSPENSION SYSTEM MS22, MS25, and MS3 Suspension Installation Manual ON/OFF HIGHWAY SUSPENSION SYSTEM 972.547.62 8.445.736 FAX: 972.542.97 725 E. UNIVERSITY ST. McKINNEY, TEXAS 7569 www.watsonsuspensions.com Watson & Chalin

More information

TABLE OF CONTENTS DESCRIPTION SAFETY

TABLE OF CONTENTS DESCRIPTION SAFETY TABLE OF CONTENTS Description... 1 Safety... 1-2 Purpose of this Manual...... 2 Important Safety Information......3 Identification.......3 Set-up and Operation.......4-9 Maintenance.....10 Specifications....10

More information

TRUSS KITS FOR SPOUTING Installation Manual

TRUSS KITS FOR SPOUTING Installation Manual TRUSS KITS FOR SPOUTING Installation Manual LAMBTON CONVEYOR LIMITED 102 Arnold Street Wallaceburg, ON N8A 3P4 Canada Telephone: (519) 695-2316 Telephone: (519) 627-8228 ONE SOURCE ONE SOLUTION Toll free:

More information

WESCO INDUSTRIAL PRODUCTS, INC. Heavy Duty Scissors Lift Tables. Part Number: &

WESCO INDUSTRIAL PRODUCTS, INC. Heavy Duty Scissors Lift Tables. Part Number: & WESCO INDUSTRIAL PRODUCTS, INC Part Number: 272970 & 272973 Note: Operator MUST read and understand these operating instructions before using this Heavy Duty Scissors Lift Table. TABLE OF CONTENTS 1 General

More information

Installation Instructions

Installation Instructions Nov 25, 2013 Upper Control Arms Installation Instructions The following instructions are intended for professional installers and are guidelines only. Speedtech Performance assumes NO responsibility for

More information

3-Stage Under Axle Jack Weight: 69.5 kg (153 lbs.)

3-Stage Under Axle Jack Weight: 69.5 kg (153 lbs.) 655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Serv.: (00) 533-627 Fax: (00) 955-329 Order Entry: (00) 533-627 Fax: (00) 23-665 International Sales: (507) 455-7223 Fax: (507)

More information

Installation for Chevrolet Corvette C7 Stingray PNs 60547* 60548, and 60558

Installation for Chevrolet Corvette C7 Stingray PNs 60547* 60548, and 60558 Installation for Chevrolet Corvette C7 Stingray PNs 60547* 60548, and 60558 These instructions have been written to help you with the installation of your Borla Performance Exhaust System. Please read

More information

78-88 G Body Rear Trailing Arm Kit

78-88 G Body Rear Trailing Arm Kit May 14, 2014 78-88 G Body Rear Trailing Arm Kit Parts in this kit may vary slightly from photo. The following instructions are intended for professional installers and are guidelines only. Speedtech Performance

More information

OnBoard Drum Major Podium

OnBoard Drum Major Podium Assembly and Owner s Manual OnBoard Drum Major Podium CONTENTS CONTENTS................................................................................. 1 SAFETY...................................................................................

More information

INSTALLATION AND MAINTENANCE MANUAL FORM #PM-122 REV A 12/09

INSTALLATION AND MAINTENANCE MANUAL FORM #PM-122 REV A 12/09 HAND CRANK WELDING CABLE REEL: SERIES 100WC COXREELS The technical data and images which appear in this manual are for informational purposes only. NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES

More information

PUSH BUTTON KEY CABINET

PUSH BUTTON KEY CABINET PUSH BUTTON KEY CABINET Model 95689 INSTALLATION And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,

More information

ATD GALLON PRESSURIZED OIL DRAIN TANK

ATD GALLON PRESSURIZED OIL DRAIN TANK ATD-5203 30 GALLON PRESSURIZED OIL DRAIN TANK ASSEMBLY & OPERATING INSTRUCTIONS TECHNICAL SPECIFICATIONS Model: ATD-5203 Capacity: 30 Gallon Drain Funnel: Adjusts from 47.25 to 70.5 Drain Funnel Diameter:

More information

AU DU PONT DE LUTTRE BRUSSELS BELGIUM PHONE: FAX: OPERATING MANUAL. Electric Fully Automatic Floor Saw FS 1218 EX

AU DU PONT DE LUTTRE BRUSSELS BELGIUM PHONE: FAX: OPERATING MANUAL. Electric Fully Automatic Floor Saw FS 1218 EX AU DU PONT DE LUTTRE 74-1190 BRUSSELS BELGIUM PHONE: 322 34 83 162 FAX: 322 34 83 136 OPERATING MANUAL Electric Fully Automatic Floor Saw FS 1218 EX 2 Important information before you start! When the machine

More information

L A N G E L I F T P R O D U C T M A N U A L PRODUCTS THAT LIFT THE WORLD! USAGE & MAINTENANCE GUIDE. a Division of Hevi-Haul International, Ltd.

L A N G E L I F T P R O D U C T M A N U A L PRODUCTS THAT LIFT THE WORLD! USAGE & MAINTENANCE GUIDE. a Division of Hevi-Haul International, Ltd. L A N G E L I F T a Division of Hevi-Haul International, Ltd. PRODUCTS THAT LIFT THE WORLD! P R O D U C T M A N U A L USAGE & MAINTENANCE GUIDE SERIAL NUMBER(S) : MODEL NUMBER : CAPACITY : POUNDS Dear

More information

PNEUMATIC GARDEN STOOL

PNEUMATIC GARDEN STOOL PNEUMATIC GARDEN STOOL 90473 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com 3 THANK YOU for choosing a HARBOR FREIGHT TOOLS product.

More information

Operator's Manual. Storage System. Ultrasound Probe Cabinet. Manufactured by:

Operator's Manual. Storage System. Ultrasound Probe Cabinet. Manufactured by: Storage System Ultrasound Probe Cabinet Operator's Manual Manufactured by: CIVCO Medical Solutions 102 First Street South Kalona, IA 52247 USA 319.248.6757 / 800.445.6741 WWW.CIVCO.COM Copyright 2018 All

More information

Assembly Instructions for A, A, A, & A

Assembly Instructions for A, A, A, & A Update Instructions Yield-Pro 1225/1625 Planter Used with: Yield-Pro 1225 Planter Yield-Pro 1625 Planter General Information! When you see this symbol, the subsequent instructions and warnings are serious

More information

Service Jack. Form No Parts List & Operating Instructions 1510B. Max. Capacity: 5 and 10 Tons. 1 of 3. Sheet No. Issue Date: Rev.

Service Jack. Form No Parts List & Operating Instructions 1510B. Max. Capacity: 5 and 10 Tons. 1 of 3. Sheet No. Issue Date: Rev. SPX Corporation 655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales:

More information

Chicane Coilover Kit For '70 to '81 Camaro/Firebird

Chicane Coilover Kit For '70 to '81 Camaro/Firebird Nov 25, 2013 Chicane Coilover Kit For '70 to '81 Camaro/Firebird 1 P a g e Installation Instructions The following instructions are intended for professional installers and are guidelines only. Speedtech

More information

Dec 1, 2017 ATS AFX Spindle Installation Instructions

Dec 1, 2017 ATS AFX Spindle Installation Instructions Dec 1, 2017 ATS AFX Spindle Installation Instructions 1 P a g e The following instructions are intended for professional installers and are guidelines only. Speedtech Performance assumes NO responsibility

More information

TIN KNOCKER FOURPLEX CLEAT FORMER INSTRUCTIONS & PARTS DIAGRAM

TIN KNOCKER FOURPLEX CLEAT FORMER INSTRUCTIONS & PARTS DIAGRAM TIN KNOCKER FOURPLEX CLEAT FORMER INSTRUCTIONS & PARTS DIAGRAM Sheet Metal Equipment Sales Inc. Dean P. O'Connell, President Green Bay, Wisconsin Phone - (90)-66-9966 Fax - (90)-66-9969 Website: www.sheetmetalequip.com

More information

OWNER S MANUAL. The following instructions provide valuable information regarding the function and proper use of the Super 5 th Wheel Towing System.

OWNER S MANUAL. The following instructions provide valuable information regarding the function and proper use of the Super 5 th Wheel Towing System. OWNER S MANUAL #1900 Industry Standard Super 5 th (16K) #2100 Industry Standard Super 5 th (18K) Gross Trailer Weight (Maximum) Vertical Load Weight (Max. Pin Weight) 16,000 lbs. 4,000 lbs. Gross Trailer

More information

400 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS

400 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS 400 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS PLEASE READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING. A. BI-PARTING TRAVEL BATTEN INSTALLATION 1. Place track either on the floor or on

More information

Extreme Duty Grapple (Rock, Skeleton, Scrap & Tine) Operation and Maintenance Manual

Extreme Duty Grapple (Rock, Skeleton, Scrap & Tine) Operation and Maintenance Manual Extreme Duty Grapple (Rock, Skeleton, Scrap & Tine) Operation and Maintenance Manual Revision Date: May 12, 2017 Skid Pro PO Box 982 Alexandria, MN 56308 Toll Free: 877-378-4642 www.skidpro.com TABLE OF

More information

1313 LOWER TRAILING ARMS CHEVROLET B-BODY

1313 LOWER TRAILING ARMS CHEVROLET B-BODY 1313 LOWER TRAILING ARMS 59-64 CHEVROLET B-BODY Thank you for your purchase from our line of classic Chevrolet B-body suspension parts.. Please call us at (877) 4NO-ROLL if you have any questions regarding

More information

WARRANTY REGISTRATION AND POLICY

WARRANTY REGISTRATION AND POLICY WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material

More information

LIFT Standard A-Arm Lift Kit Club Car Precedent Installation Instructions

LIFT Standard A-Arm Lift Kit Club Car Precedent Installation Instructions LIFT-563 6 Standard A-Arm Lift Kit Club Car Precedent Installation Instructions Contents of LIFT-563 Club Car Precedent Lift Kit: a (1 ea.) Front Suspension b (1 ea.) Driver Side Upper A-Arm c (1 ea.)

More information

ROD HOLDER & DOWNRIGGER TROLLING SYSTEM

ROD HOLDER & DOWNRIGGER TROLLING SYSTEM ROD HOLDER & DOWNRIGGER TROLLING SYSTEM Rod Holders: ANGLED FIXED MOUNT Adjustable Single Axis Adjustable Rail Mount Adjustable Clamp Mount Adjustable Dual Axis Adjustable Downrigger Mount (METALLIC) Adjustable

More information

TABLE OF CONTENTS DESCRIPTION. Safety Instructions & Safety Sign Locations Operating Instructions Assembly Instructions...

TABLE OF CONTENTS DESCRIPTION. Safety Instructions & Safety Sign Locations Operating Instructions Assembly Instructions... TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions & Safety Sign Locations... 2 Operating Instructions... 3 Assembly Instructions... 5 500 & 600 Snowblower Drawings... 8 500 & 600 Snowblower

More information

Installation Instructions

Installation Instructions FORD #3100 SuperRail Mounting Kit #3123 Gross Trailer Weight (Maximum)...12,000 lbs. Vertical Load Weight (Max. Pin Weight)...3,000 lbs. Installation Instructions SPECIFICATIONS Fits 2015-2018 Ford F-150

More information

Wood Chipper Model C550M Operator's Manual

Wood Chipper Model C550M Operator's Manual Wood Chipper Model C550M Operator's Manual THIS MANUAL MUST BE READ AND UNDERSTOOD BEFORE ANYONE OPERATES THIS MACHINE! Manual# 990023 Revised 01/2010 YOU MUST FILL OUT YOUR WARRANTY REGISTRATION TO ACTIVATE

More information

Model 289F. Operator s Manual for Morse Model 289F. MORStak TM Forklift-Mounted Drum Racker. The Specialist In Drum Handling Equipment

Model 289F. Operator s Manual for Morse Model 289F. MORStak TM Forklift-Mounted Drum Racker. The Specialist In Drum Handling Equipment Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Machine Description................... 3 Operating Instructions....................

More information

jegs.com. Installation Instructions for Ton Aluminum Floor Jack

jegs.com. Installation Instructions for Ton Aluminum Floor Jack Installation Instructions for 80077 3-Ton Aluminum Floor Jack Contents: Specifications Warning Information Setup and Operating Instructions Preventive Maintenance and Troubleshooting Hydraulic Maintenance

More information

Air Operated Diaphragm Pumps Operating and Maintenance Instructions

Air Operated Diaphragm Pumps Operating and Maintenance Instructions Product & Chemical Disclaimer The user must take responsibility in the selection of the products materials of construction. Empire Pumps Ltd will act in an advisory role and offer recommendations; however,

More information

MODEL 7100 PORTABLE PIN WELDER OPERATOR S MANUAL

MODEL 7100 PORTABLE PIN WELDER OPERATOR S MANUAL Model 7100 Portable Pin Welder MODEL 7100 PORTABLE PIN WELDER OPERATOR S MANUAL Copyright: March 22, 2005 Revised: December 20, 2016 Gripnail Corporation An Employee Owned Company 97 Dexter Road East Providence,

More information

Please compare the parts in the box with the bill of materials provided to assure that you have all the parts necessary for this installation.

Please compare the parts in the box with the bill of materials provided to assure that you have all the parts necessary for this installation. Installation for Chevrolet Corvette C7 Stingray & ZO6 (Standard exhaust) PN s - 11862, 11863, 11868, 11869, 11877, 11878, 11880, 11881 (Optional NPP) PN s - 11874, 11855, 11875, 11856 ZO6 PN s - 11902,

More information

WESCO INDUSTRIAL PRODUCTS, INC. Folding Handle Scissors Lift Table. Part Number:

WESCO INDUSTRIAL PRODUCTS, INC. Folding Handle Scissors Lift Table. Part Number: WESCO INDUSTRIAL PRODUCTS, INC Folding Handle Scissors Lift Table : 260201 Note: Operator MUST read and understand these operating instructions before using this Folding Handle Scissors Lift Table. TABLE

More information