Schletter. Solar Mounting Systems

Transcription

1 Schletter Solar Mounting Systems Component Overview October 2016

2 Design, order, and purchase systems on-line! Ideally suited for projects of 50 kw or smaller in size, PV Powersite offers system configuration for Schletter's Standard Flush Mount, Windsafe (for flat and penetrating roofs), PvMini and PvMax for ballasted ground mount, and the aluminum FS System for single post ground mount installations. PV Powersite makes ordering convenient and fast while providing a permit-ready package which includes: Structural acceptance letter System drawings Parts list To order, select a system from the PV Powersite home page at input project data, click add to basket, and be transferred to Schletter Secure for convenient on-line ordering. A log in is required to store. Contact a Schletter sales representative for more information or assistance at

3 Table of Contents components overview Roof Attachments 5 Tile 6 Asphalt Shingle 8 Corrugated and Trapezoidal Sheet Metal 10 Standing Seam 12 Attachment Accessories 13 Module Clamps 15 Framed Modules 16 Laminate Modules and Accessories 18 Rails and Accessories 21 Standard Rails 22 Cable Management and Accessories 28 Grounding Jumpers 30 System Related Components 33 Roof System Components 34 FS System Components 36 FS Uno and FS Duo Components 37 Hardware 39 Screws and Bolts 40 Washers and Nuts 42 3

4 4

5 Roof Attachments Tile and Asphalt Shingle Roof Hooks Flashed Solutions Standoff Corrugated and Trapezoidal Sheet Metal FixT Fix2000 VarioFix-V Standing Seam 503 S-5! Attachment Accessories 5

6 Tile roof attachments Roof Hook Overview All roof hooks are made of high quality stainless steel; hardware sold separately. Roof hooks sold in bulk package as indicated below. e d a b c f g material thickness Used on S-shaped tile roofs Eco SV Roof Hook Package size: 25 pieces a b c d e f g mm inches Eco SV Roof Hook with KlickTop Package size: 25 pieces Eco S-130 Roof Hook Package size: 25 pieces a b c d e f g mm inches Eco S-130 Roof Hook with KlickTop Package size: 25 pieces Eco G-35 Roof Hook Package size: 25 pieces a b c d e f g mm inches Eco G-35 Roof Hook with Rapid 2+ (pictured) Package size: 25 pieces 6

7 b a c d e g material thickness adjustable f Used on S-shaped tile roofs Rapid 2+ Max Roof Hook Package size: 25 pieces a b c d e f g mm inches a b c d e f material thickness Used on flat tile roofs Plain Tile Roof Hook Package size: 25 pieces a b c d e f mm inches Plain Tile Roof Hook with KlickTop Package size: 25 pieces Plain Tile Roof Hook Vertical Package size: 25 pieces a b c d e f mm inches Plain Tile Roof Hook Vertical with Rapid 2+ (pictured) Package size: 25 pieces 7

8 Asphalt Shingle roof attachments Used on asphalt shingle roofs Rapid 2+ Asphalt Shingle Roof Hook Package size: 25 pieces length height width thickness mm inches Asphalt Shingle Roof Hook Vertical Package size: 25 pieces length height width thickness mm inches Quick Mount PV 12 in. square aluminum flashing protects against leaks Quick Mount PV Kit Stainless steel hardware included Package size: 12 kits Quick Mount PV Kit w/ KlickTop HB For easy integration with Schletter rails Package size: 12 kits EJOT 12" x 8" x 0.04" aluminum flashing protects against leaks. Designed for THREE TAB strip asphalt shingle roofs EJOT Flashing Flashing only, hardware not included. Package size: EJOT Flashing kit with Gator Clamp Package size: 12 kits EJOT Drilling kit Kit good for up to 500 flashings Package size: 2 8

9 Asphalt Shingle and Composite roof attachments Standoff High quality aluminum mounting standoff with steel thread bolts (M10 x 1 long) and flange nut. Square base 90 mm / Variety of heights available Standoff with Flange Nut (102 mm) Package size: Standoff with Flange Nut (152 mm) Package size: Standoff with Flange Nut (203 mm) Package size: Standoff with Flange Nut (254 mm) Package size: Standoff with Flange Nut (304 mm) Package size: Standoff KlickTop HB Kit Package size: 20 kits Standoff KlickTop HB Kit Package size: 20 kits Standoff KlickTop HB Kit Package size: 20 kits Standoff KlickTop HB Kit Package size: 20 kits Standoff KlickTop HB Kit Package size: 20 kits Oatey Flashing No hardware included. Package size: 12 9

10 Corrugated and Trapezoidal Sheet Metal roof attachments h w FixT, Universal High quality aluminum; for use on corrugated and trapezoidal sheet metal roofs; good for high wind and snow loads; hardware sold separately FixT Universal design with multiple roof attachment holes predrilled for ease-of-installation Package size: 20 w h l mm inches FixT Accessories EPDM Sealing Washer Package size: 100 pieces Spacer Standard length: 81 mm Screw 8x67 min. 1.5 mm self-tap with washer A2 Package size: Screw 8x100 min. 1.5 mm self-tap with washer A2 Package size: 25 10

11 Trapezoidal Sheet Metal roof attachments Fix2000 High quality stainless steel; the universal trapezoidal sheet metal attachment for steel sheets 26 gauge or thicker Fix2000 with KlickTop and PVC Foam Insert Designed with glued in PVC foam insert for water sealing (manufacturer recommended) Package size: 200 kits Fix2000 Standard Kit and PVC Foam Insert Designed with glued in PVC foam insert for water sealing (manufacturer recommended) Package size: 200 kits Single VarioFix-V SingleFix-V Kit, 144 x 36 mm VarioFix-V with PVC foam tape and self-drilling screws ( ) Package size: 75 kits 11

12 Standing Seam roof attachments S-5! For use with most types of standing seam roofs S-5-T Mini For T shaped seam profiles Package size: 70 pieces S-5-U Mini For vertical seams and for horizontal 2 seam profiles Package size: 50 pieces S-5-Z Mini For wide, rounded seam profiles Package size: 68 pieces S-5-E Mini For double-folded seem profiles Package size: 90 pieces S-5-U Manufacturer recommended solution for vertical seams and for horizontal 2 seam profiles Package size: 30 pieces S-5-E Mini KlickTop Kit S-5-U KlickTop HB Kit S-5-T Mini KlickTop Kit For easy integration with Schletter rails Package size: 70 pieces S-5-U Mini KlickTop Kit Package size: 50 pieces S-5-Z Mini KlickTop Kit Package size: 68 pieces S-5-E Mini KlickTop Kit Package size: 90 pieces S-5-U KlickTop HB Kit For easy integration with Schletter rails Package size: 30 pieces S-5-U Rapid 2+ Angle Kit For easy, elevated integration with Schletter rails Package size: 30 pieces 12

13 Attachment Accessories roof attachments Roof Attachment Accessories High quality aluminum; for easy connection of roof attachments to Schletter module-bearing rails. All attachment accessories are made of high quality aluminum KlickTop Roof Hook Attachment Kit Includes hardware Package size: 25 kits Rapid 2+ Terminal Clamp Kit Includes hardware Package sizes: 25 kits KlickTop HB (Gator Clamp) Hardware sold separately Package size: 20 pieces 43 KlickTop Flat Partial Assembly Hardware sold separately Package size: 40 pieces Rapid 2+ Angle, M8 Connection Hardware sold separately Package size: 40 pieces Rapid 2+ Angle, M10 Connection Hardware sold separately Package size: 40 pieces Technical Data (for Schletter components) Material Hardware: Stainless steel, grade 304 Aluminum components: Aluminum alloys 6063, 6105 Sheet metal components: Stainless steel, grade 304 PVC Foam: UV resistant rubber Structural Analysis Structural calculations are according to the current specific national standards (IBC 2006,2009, or 2012 and/or NBC of Canada). Determination of number of attachments and locations is based on structural analysis and verified by tensile tests in a laboratory. Always consider structural safety. The check of the roof capacity and its connection substructure is not included in the general structural analysis of attachments. The appropriate calculations and checks should be performed to ensure roof and substructure can accommodate the weight of the system in addition to snow and wind loads. Also consider increased loads in roof edge and corner zones. In cases where roof attachment is connecting to roof cladding rather than directly to the substructure, verification of the connection forces of the roof cladding to the substructure is not part of the design and must be verified by the owner/installer. 13

14 14

15 Module Clamps Framed Modules Rapid5K Module Clamps (Aluminum Systems) Rapid 2+ Adjustable End Clamp FS Uno /FS Duo Rapid5K Module Clamps (Steel Systems) Laminate Modules Eco Series Eco6-S4 for First Solar FS Series 4 Accessories 15

16 Framed Modules module clamps Rapid5K Clamps Rapid5K, high quality aluminum end and middle clamps for rails using an 8 mm top channel, Schletter also offers a convenient Rapid 2+ adjustable end clamp. Both clamps are used with all aluminum solar mounting systems offered by Schletter. Rapid5K clamp meet UL 2703 Ed. 1 standards, tested with specific modules.1 For Modules Mounted in Portrait Packaged sizes: 25 or 125 pieces, aluminum Black anodized clamps packaged in 125 or 250 pieces, contact sales representative for more information Frame Height Adjustable End Clamp Grounding End Clamp Grounding Middle Clamp mm For Modules Mounted in Landscape Packaged sizes: 25 or 125 pieces, aluminum Black anodized clamps packaged in 125 or 250 pieces, contact sales representative for more information Frame Height Adjustable End Clamp Grounding End Clamp Grounding Middle Clamp mm See Schletter system installation manuals for complete UL 2703 Ed. 1 guidelines and approved modules

17 FS Uno Rapid5K Module Clamps Designed and pre-assembled specifically for the FS Uno and FS Duo systems only, will not connect to Schletter aluminum systems. Conforms UL 2703 Ed. 1 with approved modules. See system mounting instructions for more information. For Modules Mounted in Portrait Packaged sizes: 25 or 125 pieces Frame Height mm FS Uno Rapid5K End Clamp (Right) FS Uno Rapid5K End Clamp (Left) Frame Height mm FS Uno/Duo Rapid5K Middle Clamp

18 Laminate Modules and Accessories module clamps Eco Series Laminate Clamps 11 mm / 0.43 engagement length into the module, the gap between the modules measures between 20 and 30 mm / 0.79" 0.91" (no pressure onto the laminates). Eco6-S4 is compatible with First Solar FS Series 4 modules. When tightening bolts, use the recommended torque Middle Clamp Eco6 Laminate 6.8 mm Kit Includes hardware (M8 x 20) Package size: 44 pieces End Clamp Eco6 Laminate 6.8 mm Kit Includes hardware (M8 x 20) Package size: 18 pieces Middle Clamp Eco8 Laminate 8 mm Kit Includes hardware (M8 x 20) Package size: 44 pieces End Clamp Eco8 Laminate 8 mm Kit Includes hardware (M8 x 20) Package size: 18 pieces Middle Clamp Eco6-S4 Laminate 6.8 mm Kit Includes hardware (M8 x 20) Package size: 44 pieces End Clamp Eco6-S4 Laminate 6.8 mm Kit Includes hardware (M8 x 20) Package size: 18 pieces 18

19 Eco Series Clamp Accessories Safety Hook for Laminate Thickness 6.8 mm / 0.26 Prevents the modules from sliding when mounted in portrait orientation Package Size: 30 pieces Safety Hook for Laminate Thickness 8 mm / 0.31 Package Size: 30 pieces Accessories for All Module Clamps Module Support Plate Increases the support area for modules Package size: 90 pieces Necessary accessory with Eco Series clamps and with any clamp when modules mounted in horizontal format 19

20 20

21 Rails and Accessories Standard Rails Series 05 S-Rail Series DN-Rail Series BF-Rail Series Wire Management and Accessories Cable Clips Wire Trays End Caps Micro Inverter Mounting Kits Bonding Jumpers Combiner Box Mounting Kits 21

22 Standard Rails rails and accessories h w Series 05 For use in conjunction with the KlickTop system; typically used in flush mount projects. NOTE: Minimum quantities may be required on custom cut rails. Contact a Schletter representative for more information. Mechanical Connections: Top: Klick Channel M8 Bottom: Screw Channel M10 for narrow spans Eco05 Module Bearing Rail Custom Cut Length m / 13.78' m / 20.34' w h mm inches for wider spans SoloLT Module Bearing Rail Custom Cut Length m / 13.78' m / 20.34' w h mm inches with cable duct Profi05 Module Bearing Rail Custom Cut Length m / 13.78' m / 20.34' w h mm 40/62 40 inches 1.57/ for wider spans ProfiPlus05 Module Bearing Rail Custom Cut Length m / 13.78' m / 20.34' ProfiPlus XT Module Bearing Rail Custom Cut Length m / 20.34' w h mm inches w h mm inches

23 Series 05 Splice Kits single plate pre-assembled Eco05 Connector Plate Package size: 160 pieces Eco05 Connector Plate Assembly Pre-assembled including hardware Package size: SoloLT and Profi05 Internal Splice Includes hardware Package size: 125 kits ProfiPlus05 Internal Splice Kit Includes hardware Package size: 68 kits 23

24 Standard Rails rails and accessories S-Rail Series For use as purlins in aluminum ground mount systems and carports. Minimum quantities of 14 to 20 pieces may apply. Contact a Schletter Sales Representation for more information. Mechanical Connections: Top: Klick Channel M8 Bottom: Special mounting/locking clamps, see page 36 Profile S Custom Cut Length m / m / Profile S1 Inside Custom Cut Length m / m / Profile S1 Outside landscape only m / m / Profile S Custom Cut Length m / m / Profile S Custom Cut Length m / m /

25 Profile S Custom Cut Length m / m / Profile S Custom Cut Length m / m / Profile S Custom Cut Length m / m / Profile S Custom Cut Length m / m / S-Rail Series Splice Kits Each splice requires a connection using self-tapping screws which are provided with each splice. Package sizes: 12, 24, 36, 48 kits (multiples of 12) splice installation example S0 Internal Splice S1 Internal Splice S1.5 Internal Splice S1.8 Internal Splice S2 Internal Splice S3 Internal Splice S3.5 Internal Splice S4 Internal Splice 25

26 Standard Rails rails and accessories BF-Rail Series Used as a load distributor for wide spans and in conjunction with the S-Rail Series. Mechanical Connections: Klick Channel M10 BF0 Mounting Rail Custom Cut Length m / m / BF1 Mounting Rail Custom Cut Length m / m / BF2 Mounting Rail Custom Cut Length m / m / BF3 Mounting Rail Custom Cut Length m / m /

27 BF-Rail Series Splice Kits Each splice requires a connection using self-drilling screws which are provided with each splice. splice installation example BF1 Internal Splice BF2 Internal Splice BF3 Internal Splice All BF rails ship from our North Carolina location. 27

28 Cable Management and Accessories rails and accessories Cable Management ProKlip-C Rectangular cable management to be snapped onto the side of Solo05 and Profi05 rails. Package size: ProKlip-Q Round cable management for use with S-Rail Series Package size: ProKlip 2000-P Round cable management for use with S-Rail Series Package size: ProKlip-F Round cable tube clip for use with FS foundation posts Package size: ProKlip-Multi 8 Rectangular, to be snapped into the M8 screw channel Package size: ProKlip-Multi 10 Rectangular, to be snapped into the M10 screw channel Package size: HellermannTyton Cable Fastener Package size: 100 installation example with edge protection Cable Duct S-Rail Series Custom cut to length, available in multiple configurations (consult a Schletter Sales Representative to determine project configuration) Mechanical Connection: Self-drilling screws Internal Assembly External Left Assembly External Right Assembly Edge Protection, Left Open Edge Protection, Left Closed Edge Protection, Right Open Edge Protection, Right Closed KlickIn Component for M8 Square Nuts For simplified placement of the M8 square nut at any desired location in the M8 KlickIn channel of Schletter rails M8 Package size: 100 pieces KlickTop Cross Connector Kit For connecting cross rail systems at any desired location in the M8/M10 Klick channel of Schletter rails M8 Package size: 40 kits 28

29 Rail End Caps S-Rail end caps requires 3 self-drilling screws, sold separately Plastic End Cap for Solo05 and Profi05 Rails Included free of charge in pre-packaged PV systems Package size: 48 pieces S0 End Cap (right) Package size: S0 End Cap (left) Package size: S1 End Cap (right) Package size: S1 End Cap (left) Package size: S1.5 End Cap Package size: S1.8 End Cap Package size: S2 End Cap (right) Package size: S2 End Cap (left) Package size: S3 End Cap (right) Package size: S3 End Cap (left) Package size: S3.5 End Cap Package size: S4 End Cap Package size: 12 Micro Inverter Mounting Hardware Kits For connecting Enphase micro inverters to Schletter rails. Two mounting hardware kits to choose from Compatible with S-Series rails, grounding not included Package size: 20 kits Compatible with Solo/Profi/Fix-Z rails, includes ETL Listed grounding conductor plate ( ); conforms to ANSI/ UL Standard 467, certified to CSA Standard C22.1 No. 41 Package size: 20 kits 29

30 Cable Management and Accessories rails and accessories Grounding Jumpers Electrically bonds adjacent systems forming a continuous grounding path. Grounding jumper connects directly to purlins and is available in 6, 12, and 24 inch lengths with channel connections of M12, M10, and M8. For connections to various channels (M12, M10, and M8), select grounding jumper and corresponding hardware based on channel connection size. M12 Grounding Jumpers For connecting adjacent systems with M10 top channels. Suggested connection hardware listed below Grounding Jumper 6, 12, and 24 inch lengths. Hardware quantities stated are for a single grounding jumper connection Grounding Jumper, 6 inch Grounding Jumper, 12 inch Grounding Jumper, 24 inch Hex head screw, M12x30mm, 304 SS, Qty 2 per Jumper Washer, M12, 304 SS, Qty 2 per Jumper Serrated flange nut, 316 SS, Qty 2 per Jumper M10 Bottom Channel Grounding Jumpers For connecting adjacent systems with M10 top channels. Suggested connection hardware listed below Grounding Jumper 6, 12, and 24 inch lengths. Hardware quantities stated are for a single grounding jumper connection Grounding Jumper, 6 inch Grounding Jumper, 12 inch Grounding Jumper, 24 inch Hex head screw, M10x20mm, 304 SS, Qty 2 per Jumper Washer, M10, 304 SS, Qty 2 per Jumper Serrated flange nut, M10, 316 SS, Qty 2 per Jumper 30

31 M10 Top Channel Grounding Jumpers For connecting adjacent systems with M10 top channels. Suggested connection hardware listed below Grounding Jumper 6, 12, and 24 inch lengths. Hardware quantities stated are for a single grounding jumper connection Grounding Jumper, 6 inch Grounding Jumper, 12 inch Grounding Jumper, 24 inch Hex head screw, M10x20mm, 304 SS, Qty Washer, M10, 304 SS, Qty Serrated flange nut, M10, 316 SS, Qty 2 M8 Channel Grounding Jumpers For connecting adjacent systems with M10 top channels. Suggested connection hardware listed below Grounding Jumper 6, 12, and 24 inch lengths. Hardware quantities stated are for a single grounding jumper connection Grounding Jumper, 6 inch Grounding Jumper, 12 inch Grounding Jumper, 24 inch Hex head screw, M8x20mm, 304 SS, Qty 2 per Jumper Washer, M8, 304 SS, Qty 4 per Jumper Serrated flange nut, M8, 316 SS, Qty 2 per Jumper Combiner Box Mounts For connection of combiner boxes to Schletter ground mount systems. Combiner Box Mounts For connecting combiner boxes to posts FS System/FS Uno/FS Duo, M8, 2' Rail Length Package size: 2 kits Park@Sol Carport Combiner and Inverter Mount, 4' Rail Package size: 2 kits PvMax, M8 Package size: 2 kits 31

32 32

33 System Related Components Roof System Components FixZ Series Support Accessories Windsafe and Ballasted Systems, Roof Mount FS Product Family Components Support Accessories 33

34 Roof Mount, System Components system related components FixZ Series Provides additional tilt to PV modules on low-sloped roofs (portrait orientation only). Depending on the panel length, the FixZ-7 system adds 5 to 7 of tilt; the FixZ-15 adds 12 to 15 of tilt. Mechanical Connections: Top: Klick Channel M8 Bottom: Screw Channel M10 FixZ-7 Top Custom Cut Length m / m / FixZ-7 Bottom Custom Cut Length m / m / FixZ-15 Top Custom Cut Length m / m / 13.78' FixZ-15 Bottom 20 Choose FixZ-15 bottom rail based on module manufacturer s recommended clamping points. Consult a Schletter Sales Representative for further assistance Custom Cut Length m / m / 13.78' 34

35 FixZ Series Splice Kits Each kit and assembly includes hardware FixZ-15 Top Splice Kit Used in combination with FixZ-7 Internal Splice Kit Top FixZ-7 Internal Splice Kit Bottom FixZ-15 Internal Splice Kit Top FixZ-15 Internal Splice Kit Bottom 20 Roof System Support Accessories Ballast Block Concrete; used in the Fix-EZ roof mount system Rapid 2+ Angle, M10 Connection High quality aluminum; used in Fix-EZ system Rail Support Stand-off with KlickTop assembly; used in Fix-EZ system Granulate Rubber Rubber mat for Fix-EZ ballast block 35

36 Roof Mount, System Components system related components SolTub Ballast Trays Ballast trays typically used for ballasted roof mount systems. w bottom w top h Size 1 Ballast Tray (L)1,419 mm / 4.66 ft (H)152 mm / 6 in (W Bottom) 153 mm / 6 in (W Top) 249 mm / 10 in Size 2 Ballast Tray (L)1,419 mm / 4.66 ft (H)152 mm / 6 in (W Bottom) mm / 12 in (W Top) mm / 15.7 in Size 1 Ballast Tray (L)2,029 mm / 6.65 ft (H)152 mm / 6 in (W Bottom) 153 mm / 6 in (W Top) 249 mm / 10 in Size 2 Ballast Tray (L)2,029 mm / 6.65 ft (H)152 mm / 6 in (W Bottom) mm / 12 in (W Top) mm / 15.7 in Size 1 Ballast Tray, L= 2,638 mm / 8.65 ft (L)2,638 mm / 8.65 ft (H)152 mm / 6 in (W Bottom) 153 mm / 6 in (W Top) 249 mm / 10 in Size 2 Ballast Tray (L)2,638 mm / 8.65 ft (H)152 mm / 6 in (W Bottom) mm / 12 in (W Top) mm / 15.7 i Windshot A back (wind deflector) covering for elevated PV solar systems to reduce the wind loads that impact the system (this component is produced specifically for individual projects; only available upon request) Windshot, 4' Length Windshot, 6' Length Windshot, 8' Length 36

37 FS Product Line Components FS System (aluminum), FS Uno, and FS Duo FS System, Head Assembly Pre-assembled FS System, Post Splice Kit Fits post sizes 7 and 8; hardware included FS System, Mounting Clamp Locking; 80 mm FS System, Locking Clamp Top Mounts to girder and secures cross rails; 40 mm FS System, Open Clamp Bottom Mounts to girder and secures cross rails; 40 mm FS System, Safety Wedge Secures mounting superstructure to head assembly *Required in all FS System Installations Wedge Locks rails (purlins) into retainer plate Retainer Plate Secures rails (purlins) to girders Combiner Box Mount Kit Secures combiner boxes to FS, FS Uno, and FS Duo Systems. Max. combiner box plus contents weight = 100 lbs per kit 37

38 38

39 Hardware Screws and Bolts Washers and Nuts 39

40 Screws and Bolts hardware Screws and Bolts Stainless steel, grade 304. Package sizes unless noted otherwise: 25, 50, or 100 Note: Most items are in stock, but some may be special order. Larger volume orders available. Hexagon Head Bolt M10 x M10 x M10 x M10 x M10 x 90 Allen Head Bolt For standard module clamps and KlickTops M8 x 20 with serrated head M8 x 25 with serrated head M8 x 30 with serrated head M8 x 35 with serrated head M8 x M8 x M8 x 60 Secufix Anti-theft Device Simply hammered into the screw head to prevent easy removal of module clamps Installation Tool for Allen Head Screw, M Installation Tool for TORX T40 (Rapid5k Module Clamps) Ball Bearing for Allen Head Screw, M Ball Bearing for TORX T40 (Rapid5k Module Clamps) installation example 40

41 Self-drilling Screws Package sizes: 50, 100, /4-14 x 1" /4-14 x 1" with sealing washer /4-20 x 1-1/8" /4-20 x 2" Self-tapping Screws Package sizes: 150, 200, 300 For steel thicker than 1.5 mm / x 64 with sealing washer x 100 with sealing washer Hexagon Head Lag Screw Package sizes: 150, 200, /4" x 3" /4" x 4" /4" x 5" /4" x 6" /16" x 3" /16" x 4" /16" x 5" /16" x 6" /8" x 3" /8" x 4" /8" x 5" /8" x 6" 41

42 Washers and Nuts hardware Washers and Nuts High quality stainless steel, grade 304. Note: most items are in stock, but some may be special order. Package sizes: 50, 100, or 250 Washer M M M12 Large Washer M M M12 Sealing Washer /4" /16" /8" Serrated Flange Nut M M M12 Square Nut Suitable for use with all Schletter rails in combination with Klick Channel and KlickIn component M M M10 with M8 Hole Self-locking Nut M M M12 42

43 43

44 Schletter Inc. (888) North American Headquarters Manufacturing, Sales, and Training 1001 Commerce Center Drive Shelby, North Carolina USA Tel: (704) Fax: (704) Distribution, Sales, and Training 2201 N Forbes Blvd Tucson, Arizona USA Tel: (520) Fax: (520) Schletter Canada Inc. mail.ca@schletter-group.com Canada Distribution, Sales, and Training 3181 Devon Drive Windsor, Ontario N8X 4L3 Canada Tel: (519) Fax: (519) Connect On-line facebook.com/schletterinc twitter.com/schletterinc youtube.com/schletterinc Event/Workshop Information marketing.us@schletter-group.com