QQUALITY SERVICE QUALITY PRODUCTS QUALITY PERSONNEL

Transcription

1 QQUALITY SERVICE QUALITY PRODUCTS QUALITY PERSONNEL

2 Q QQUALITY SERVICE QUALITY PRODUCTS QUALITY PERSONNEL uality Service, is the pinnacle of our business. Our service is one of the most important aspects of the job, that has separated us from the competition. We take pride in providing our customers with quality service and always investigate the opportunity for improvement. Q uality Products, are what our customers expect and demand. Our products and tools meet or exceed all API requirements to satisfy the needs of our most demanding customers. Multiple testing procedures ensure performance and safety on all of our projects. Q uality Personnel, is essential to providing the service and products that our customers have come to trust. Our personnel strive to influence our company, customer, community and fellow employee to be the best we can be each day. Our employees receive the highest standard of training and tools to perform their task safely and with confidence. We don t aspire to be the largest company in the industry, simply, be the best.

3 Wellhead Production Frac Tree Rental Page 4 Composite F r a c P l u g Innovation Page 12 Drillouts Flowback C o i l Tubing Page 15 Frac Spread Pump Services Water Transfer Page 21

4 About Us McClinton Energy Group and its subsidiaries have been providing top quality equipment and service that is second to none nationwide for 7 years, and is still going strong. We are committed to being a leading provider of oilfield services and products through a comprehensive approach of providing Service Quality. We accomplish this, not only in the way that the services are performed at the wellsite, but also in the way in which they are evaluated, analyzed, managed and performed. McClinton Energy Group has 14 facilities nationwide to serve all of the major oil and natural gas plays. From composite frac plugs to time-saving wellhead equipment designs, we provide many innovative and time saving technologies designed specifically to lower operating costs for our customers. McClinton Energy Group looks forward to the opportunity to serve your wellhead supply and oilfield service needs! 3 3

5 Wellhead Equipment McClinton Energy Group sells, installs and services most types of wellhead products. Our field and service personnel are available 24 hrs a day to handle your wellhead needs. Conventional Wellhead Multi-Bowl Systems SWECO QuickLock Drilling Flange System Production Trees Drilling Manifolds Frac Stacks Field Greasing Field Pressure Testing From drilling to production, McClinton Energy Group has the equipment and service personnel to handle your needs and pressures. Production Equipment 4 4

6 Conventional Wellhead McClinton Energy Group carries a complete line of conventional wellhead components available for quick delivery. Casing Hangers - SW-22, SW-29 and SW-21P Tubing Hangers - TC1B, TC1A, TC1A-EN and TC1W Secondary Seals - SWI-PE Seal, SWI-HP-PE Seal SWI-0-2/4-0 Bushing Positive and Adjustable Chokes are designed for reliable flow control and maximum wear life. McClinton Energy s chokes are available in flanged or threaded ends, bore sizes from 1-13/16 through 4-1/16 nominal sizes, working pressures of 2,000 PSI through 15,000 PSI and standard or special trim options. Actuation Adaptable, OEM interchangeable and API 6A PSL 1 through 4 B-1 Tubing Head Adapter B2P Tubing Head Adapter A5P-EN Tubing Head Adapter BO-2 Tubing Head Adapter BHTA Tree Caps Tees Crosses All available in flange sizes 2-1/16 through 7-1/16 with working pressures of 2,000 PSI through 15,000 PSI. Sizes available in 410 stainless steel. McClinton Energy offers a wide variety of companion flanges. Most standard sizes 1-13/16 through 7-1/6 in working pressures of 2,000 PSI through 15,000 PSI. Additional types, blind and weld neck, are also available. Many sizes are available in 410 stainless steel. 5 5

7 Lock Ring QuickLock Adapter w/2 BP Pins QuickLock Wellhead System Benefits Reliable Conventional Equipment Field Proven Sealing Design Conventional Threaded Bottom Casing Head Fluted Landing Ring Support Ring Conductor Pipe Surface Casing Rig Time Savings Safe, Fast Nipple Up, Nipple Down Standard C-22 Test Plug Using the QuickLock adapter, The BOP can be made-up fast and safely to the casing head. The adapter is also equipped with two locking pins to allow for the use of a wear bushing. This System Allows a Fluted Mandrel or Slips to be Used. 6 6

8 Multibowl Wellhead System Our multi-bowl wellhead design allows Benefits Standard Off-the-Shelf Casing Head Lower Profile Solution Common Support Bushing Field Proven Sealing Designs FS Seals require No Plastic Packing C-29 Profile = Standard Off-theShelf Slips Removable Upper Section = Improved Asset Management Rig Time Savings and reduces footprint. This system is easily configured and can be adapted for the most standard or complex environments. A full array of service tools to support this product line is available; including test plugs, wear bushings, running tools, and casing Discover More hanger installation tools. Multi-Bowl Spool Fluted Mandrel Casing Hanger Standard Casing Head 7 wellhead component without having to break the BOP. This saves installation time Packoff Assembly 7 multiple casing strings to be hung in a single

9 Quickset Wellhead Through the innovation of a patent pending casing head design, our Quickset Wellhead Benefits The Quickset Wellhead Assembly comes fully assembled and pre-tested for fast and simple installation needing to be welded on. Assembly can be easily installed through the rotary door This system also utilizes the same time Wellhead Assembly can be swiveled after being set for easy orientation before locking in place Same field proven sealing designs and low profile as our Multi-Bowl Wellhead System System saves rig time by allowing a preassembled and tested assembly to be installed on the surface casing without saving features of our Multi-Bowl Wellhead system, adding to rig time savings which translate into greatly reduced operating costs. Discover More Quickset Casing head Landing Mandrel Bolt secures Lockring in the Landing Mandrel Fluted Landing RIng Surface Casing Collar Support Ring Conductor Pipe 8 8

10 Frac Equipment Frac Valve Rentals - Sales* & Service Texas - Odessa, Joshua, Houston* and Victoria Oklahoma - Norman, Oklahoma City* Colorado - Johnstown, Denver* Wyoming - Casper New York - Elmira Ohio - Canton, Marietta Pennsylvania - Perryopolis Frac Valve Inventory SWECO Boasts one of the largest frac inventories in the nation, featuring: 1-13/16 through 7-1/16 Bores 5,000 PSI thru 15,000 Working Pressures 7-1/16 Large Bore Valves feature EZ Torque Ball Screws API 6A Material Class DD/EE and TempClass P to U Zipper Frac Manifolds 9 9

11 McClinton Energy Group offers complete valve service and repair of customer property. Our qualified valve technicians can trouble shoot and repair most valves in the market today. Valves can be serviced in shop or on customer location. Services McClinton Energy Group offers complete field service to handle our customer needs. Installation Field Testing Frac Equipment Flowback Slips / Casing Hangers Plug Catchers Back Pressure Valves Trouble Shooting Production Trees Crane Truck Service Greasing Programs Maintenance Programs Drilling Choke Manifolds w/ Console Casing Hanger Installation Frac Sleeve Isolation System Installation 10 10

12 McClinton Energy Group has secured manufacturing facilities overseas, bringing the group an international status. This includes not only the manufacture of parts from tempered material, but also foundry services allowing us to be part of the QA/QC manufacturing process from the smelting and casting of raw materials, to the final coat of paint on each product. This allows us to ensure a level of quality second to none in our products and deliver them to our customers at more competitive prices. This overseas expansion of McClinton Energy Group is just another example of how we are consistently evolving to improve our process and products in an effort to better serve our customers around the globe

13 Mustang Series Frac Plug Ball Drop Cage Ball Bridge Size Unique Composite Faster Drill-out Casing Sizes: 4-½" 5", 5-½" Casing Specs Plug Specs Operating Range Weight Range (lb) Casing Min. ID (in) Patented Casing Max. ID (in) Operating Specs O.D. (in) I.D. (in) OAL (in) Ball Size (in) Setting Tool High Temp. (F ) Pressure 4-½" k - 12k Baker #10 5" k - 12k ½" Baker #20 6k - 12k 2.25 / G-Tool (Shorty) 6k - 12k Type BD BP CgB BD BP CgB Proudly made in the U.S.A

14 Mustang Series Frac Plug: Key Advantages The Mustang Series Frac Plugs have a Patented Nose Cone Design that keeps the plug located in the center of the casing during the pump-down process to prevent pre-setting the plug. The Mustang Series Frac Plugs have been recorded being pumped down hole at speeds of 800 FPM in the vertical and 400 FPM in the horizontal without pre-setting. Run-In Speeds Vertical Section 800 feet / minute Horizontal Section 400 feet / minute The McClinton Energy Frac Plug is designed to give the user the benefit of positive engagement between two plugs. During the drill out process when a Frac Plug is drilled out to the Nose Cone portion, the slips will no longer hold the Nose Cone and it drop to the plug below. The Patented Crown Design on the Mandrel allows the Nose Cone to set securely in the crown of the frac plug below, which prevents the Nose Cone portion from spinning, allowing it to be easily drilled or milled up. Positive Engagement between Nose Cone and Crown There is absolutely 0% aluminum in a MEG Frac Plug, thus reducing the risk of a bit or mill gumming up. The patented formulation of materials that the MEG Frac Plug is comprised of has been proven to have unbelievable drill up times. The Average Drill out time for a mustang series frac plug is 6-10 minutes per plug! Time is Money Spent! The MEG Frac Plug is very Mill or Drill Bit friendly Having a record of drilling over 50 Mustang Series Frac Plugs with one tri-cone sealed Kingdream rockbit (HA Series) With the quick drill out times for the MEG Frac Plug and the use of a single rockbit, the process saves an estimated 24 hours over using competing frac plugs. This translates into direct operating cost savings for the customer. During the drill up process, it is very important that a Frac Plug s components are capable of being drilled up into pieces that are small enough as to not get the tool string hung up or stop-up the choke manifolds during flow back. The combination of the material formulation of the MEG Frac Plug and the unique design of our slips have proven to be a combination that drills or mills up very fast, with cuttings that pose no threat to the possibility of stopping up a choke manifold when flowed back

15 Drill Out Profile The following gives variations of drill out characteristics for multiple plug setting depths 9 Mustang Series 4.5 Ball Drop Composite Frac Plugs (CFP) for the completion of a Permian Basin well. Casing- 4.5, 13.5# P-110, TVD-10,897, PBTD-16,217. PLUG(9): Tag Plug 10,899 CTM, Drill out in 03 Minutes, TI and tag Plug 12,749 CTM PLUG(8): Tag Plug 12,749 CTM, Drill out in 02 Minutes, TIH and tag Plug 12,969 CTM PLUG(7): Tag Plug 12,969 CTM, Drill out in 06 Minutes, TIH and tag Plug 13,344 CTM PLUG(6): Tag Plug 13,344 CTM, Drill out in 10 Minutes, TIH and tag Plug 13,905 CTM PLUG(5): Tag Plug 13,905 CTM, Drill out in 17 Minutes, TIH and tag Plug 14,379 CTM, Short Trip The average drill out time per CFP was 7.7 minutes. Proudly made in the U.S.A. Patented Mustang Series Ball Drop - Bridge - Caged Ball PLUG(4): TIH &Tag Plug 14,379 CTM, Drill out in 04 Minutes, TIH and tag Plug 14,498 CTM PLUG(3): Tag Plug 14,498 CTM, Drill out in 08 Minutes, TIH and tag Plug 15,505 CTM PLUG(2): Tag Plug 15,505 CTM, Drill out in 08 Minutes, TIH and tag Plug 16,001 CTM PLUG(1): Tag Plug 16,001 CTM, Drill out in 12 Minutes, 16,052 CTM 14 14

16 Downhole Motors BICO SpiroStar Stators provide strength, durability and increased power output making them the smart choice for optimum performance in today s ever-changing and harsher environments. Proven performance derived over years of field testing has established SpiroStar as the market leader. SpiroStar Stators are commercially available in sizes ranging from 1-11/16 through 8. More power Underlying steel lobes permit the rubber to achieve a stronger seal resulting in 2x more power than most conventional motors. This often results in higher effective ROP s due to more time on bottom drilling in directional steering applications due to a more consistent tool face. This can be critical in high angle, extended reach, performance drilling, over thrust drilling or applications where you need more power such as when you require high weight on bit or run larger bi-center bits in a deepwater application. Longer life Uniform thickness of injected elastomer in each tool reduces the probability of chunking due to hysteretic failure since the elastomer is structurally supported by the steel tube. We currently have stators in the field that have in excess of 1200 circulating hours without being relined. Higher temperature ratings Thin, uniform thickness of the rubber causes it to expand very little with temperature changes. Heat generated in standard drilling operations is more readily dissipated through the thin layer of rubber, directly to the steel tube. Even Wall power sections have been run in wells with temperatures approaching 400 degrees. Chemical resistance Fluids that tend to swell or soften other various rubber compounds on the market do not effect the Even Wall stators in many cases. Performance in oil based and synthetic muds has been impressive and the number of relines has been greatly reduced. Improved performance capability In many directional applications a shorter tool can be run due to the higher power output per unit length. This has permitted higher dogleg capability and increased the use of motors in specialty applications. Some of the specialty applications have included dual laterals, open hole sidetracks, use on production decks of offshore platforms, coiled tubing and coal bed methane applications. For Illustrative Purposes Only 15 15

17 Operating Data Flow Range gpm (lpm) ( ) Motor Pressure psi (bar) 875 (60) Bit Speed rpm Displacement rev/gal (rev/l) (.843) Torque ft-lbs (Nm) 535 (725) Power HP (Kw) 39 (29) Physical Dimensions Power Section Configuration Stages 3.5 Lobes 5/6 Bit to Stabilizer in (mm) N/A Bit to Bend Overall Motor Length Fixedi Fixed n (mm) ft (m) 31.1 (790) 12.0 (3.7) Adj Adj in (mm) ft (m) 37.2 (945) 12.9 (3.9) Weight lbs (kg) 205 (93) Connections Box 2-3/8 Reg, Top/Bottom Bit Sizei n (mm) 3-1/4-4 ( ) 400 Rated 650 Bit Speed (rpm) GPM 90 GPM 60 GPM Torque (ft-lbs) Motor Type Motor Output M otor Input Physical Motor D ata DiaM odel B it Speed Torque Power Flow Range Motor DP Bit Size Power Section (IN) - RPM FT-LBS (NM) HP (KW) GPM (LPM) PSI (BAR) (IN) STAGES LOBE SR EV/GAL 1-11/16" SS (227) 13 (9.7) (76-151) 575 (40) 1-7/8" to 2-3/4" 2.3 5/ /8" SS (559) 53 (40) (76-190) 1500 (103) 2-3/16" to 3-1/4" 6 5/ /8" SS150 SS150AD (725) 535 (725) 48 (36) 39 (29) ( ) ( ) 875 (60) 875 (60) 3-1/4" to 4" /6 5/

18 COILED TUBING CONNECTOR One of the most important tools in a Coil Tubing Bottom Hole Assembly is the Connector. It is the link between the BHA and the pipe itself. As such, it should be able to withstand severe conditions such as side loading, snubbing, and pulling under many different well bore environments. The HDT Slim/Set line of Connectors has proven time and time again to be the strongest and most reliable Connectors available today. It is available in standard service material and L-80 sour service material upon request. The models include: OD for 1 Coil OD for 1 1/4 Coil OD for 1 1/2 Coil OD for 1 3/4 Coil OD for 2 Coil DUAL FLAPPER CHECK VALVE The Dual Flapper Check Valve is used to prevent well bore pressure from flowing back through the work string. It has a large diameter ID through the cartridge valve seat to allow for maximum flow rates and minimum flow restrictions. Unlike other Flapper Valves, the HDT Valve has replaceable Viton seats which keeps maintenance cost to a minimum. It is also considerably shorter in length than other available valves. Aflas and Teflon seats available upon request. The models include: OD OD OD OD Heavy Duty HD models are also available and are referred to as Slip/ Set Connectors HYDRAULIC DISCONNECT The Hydraulic Disconnect is used to provide a means of remote separation of the tool string from the coil tubing by way of a drop ball. The lug style of the BMF has proven time and again to be the industries strongest to date allowing for operators to effectively and repeatedly jar with this tool in fishing assemblies. It also has a very strong anti-rotational feature for use with mud motors. The models include: OD OD OD DUAL CIRCULATING SUB The use of a Dual Circulating Sub allows operators to remote by-pass operating fluids that may potentially harm mud motor components. This Is done by means of a drop ball that will shift a piston and divert the fluid around any tool below. It also has a rupture port feature that will shear and allow circulation in the event a mill becomes plugged solid and circulation cannot be achieved for disconnecting purposes. The models include: OD OD OD 17 17

19 Product Desc. Application Working Pressure Hydraulic Triple Ram Wireline BOP Test Pressure ID (Range) Features Grease Inj. Pkg. All 10,000 15, /8 Grease Inj. Pkg. All 15,000 22, /8 Grease Injection Packages Dual HYD grease inj. pump, hoses, lubricator, BOP and grease head Dual HYD grease inj. pump, hoses, lubricator, BOP and grease head Lubricator, 10K-15K Working Pressure Flowback Services All of our flowback units are comprised of tested and certified 15k components. We also offer plug catchers with our flowback services that are rated at 5k. Flowback services are performed by a two-man crew of professionally trained and experienced flowback operators and hands. Plug Catchers 18 18

20 Coil Tubing and Nitrogen Services customized for your specific application. From sand clean-outs and plug drill outs to ultra high pressure, high temperature (HPHT) operations. Services Completion Coil Tubing Completion Jetting Setting Packers and Plugs Tubing Conveyed Perforating Well Fluid Displacement Vertical and Horizontal plug drillouts Production Acid Stimulation Paraffin Removal Workover Back Washing Injection Wells Cementing Foam Washing with Nitrogen Milling Plug and Abandonment Sand Washing Setting Packers and Plugs Solid Removal Thru-Tubing Fishing MEG Coil Tubing units are rated up to a maximum allowable working pressure of 15M psi. MEG Coil Tubing units are suitable for sweet and/or sour service in onshore environments. Our inventory of hydraulic Coil Tubing injector systems include injectors that can safely handle 1-1/4" to 3-1/2" O.D. coil with a maximum pull force of 80,000 lbs and continuous maximum snub force of 40,000 lbs. Coil Tubing Equipment Coil Tubing Units Coil Tubing 17,000' tapered 2" Weight of Units 110, ,000 lbs Pipe Sizes 2" Pressure Control Equipment Data Acquisition 15,000 psi Yes BOP Stacks 5-1/16" 19 19

21 Nitrogen Pumping Units N 2 Tank N 2 Pump Displacement Max Working Pressure Max Displacement of N 2 Weights 2,000 gal 180,000 scfh 10,000 psi 3,000 scf/min 65,000-75,000 lbs Fluid Pumping Units Pump Rates Pressure Rating (working) Weights Up to 12 BBLS/Min 5,000-15,000 psi 50,000-73,500 LBM 20 20

22 Frac Spread - Pressure Pumping Services Conservative Footprints Environmental and Safety Control Cost savings Skid Mounted Pumps 22,000 HP in a 80' x 80' footprint All units fully contained with waste removal system Fire suppression system Low operator requirements Air start system Quick rig up / down Advanced diagnostics in the Micro Motion system allow the user to monitor the operating performance of the PSA meter and to differentiate between air in the system and changes in fluid, thus increasing system performance. Measurement accuracy meets application requirements, and because the technology is nonradioactive, the extra safety, certification, and handling issues associated with a nuclear densitometer are eliminated. Additionally, setup is simplified and startup time is reduced due to the elimination of the nuclear densitometer s zeroing and calibration. Requirements, saving time and money on each job

23 Hybrid Backside Hydro-Blender US Provisional Patent Application Serial No: 61/528, bbl capacity baffle walled tank Rated 125 bpm 2-1/2 Augers, 1-8 Auger Mixing Tub Volume is 10 bbls Concentration Capacity is 20lb / gal Sand Transfer Capacity is 28,600 lbs / min 2 - Gorman Rupp 12 x 12 Suction Pumps 1 - Mission 14 x 12 Discharge Pump, Discharge rate of psi 3-10 Magmeters, Tank Suction, Tank Discharge, Tub Discharge Non-Radioactive micro-motion density meters Elevated operators cabin Operator friendly Manual or Automatic modes Compatible suction and discharge manifolds 49.2' The Sand Warrior - Expandable Sand Storage US Provisional Patent Application Serial No: 61/528, ' 13.44' Minimum 300,000 lb storage to Maximum 500,000 lb storage Multi-unit operators control Elevated control area 22 22

24 Data Unit 360 viewing of location and surrounding areas Generator powered Simple and user friendly DAS Satellite / Remote monitoring and live stream video Low operator costs Blender Skid mounted 120 bbl / min blender Fully contained with fire suppression system 10bbl tub 23 23

25 Foot Print 80' 80' Average Crew of Backside Operators 2 - Frontside Operators 1 - Control Room Operator 1 - Treater 2 - Lab Techs Environmental Control Contained Chem Units Contained Hydro-Blender Contained Frac Skid The vision of this design is to be on the front end of Shale Play, Multi-Well completion pads. It minimizes the amount of overhead by designing a spread of Must-Haves. The design footprint is a must have on Mega Pads. The safety and Environmental Protections, Footprint, and Operating Areas are highly significant to the safety and success of high rate pressure fracs

26 Water Transfer Services Adamandt Water Transfer is dedicated to getting the water you need to your location in a safe and efficient manner. Our professionally trained pump operators make customer satisfaction and safety their top priority. Combining this with over 30 miles of aluminum pipe and all-terrain capabilities, Adamandt Water Transfer brings you both affordable and reliable water transfer services. Our inventory of more than 24 water transfer pumps run at 350 hp. Aluminum Pipe Adamandt uses 10 Aluminum pipe, which is lightweight and easily moved for speedy project setup and deconstruction. Our inventory totals over 30 miles of pipe with both Ring-Lock and Victaulic style connections

27 Lay Flat Hose Adamandt also has 20 miles of 10 polyurethane lay flat hose available, which allows for quick layout and retrieval along with more flexibility. With the ability to layout and retrieve up to 1 mile in 30 minutes, we are able to change on the fly by decreasing layout and retrieval times almost as much as 90%. The leak proof and chemical resistance of this hose allows us to transfer produced and other chemical-laden water that is not possible due to system leaks inherent in aluminum irrigation pipe systems. There are also fewer chances for failure using high quality couplings that require only 8 connections per mile compared to 176 connections per mile for aluminum irrigation pipe. Max Flow Chart Specifications 26 26

28 For more information about your next project, contact the sales / service location in your area. Our knowledgable sales staff can answer your questions when planning your drilling program. Johnstown, CO Denver, CO (Sales) Midland / Odessa, TX Midland / Odessa, Texas Phone: Fax: Joshua, Texas Phone: Fax: Canton, Ohio Phone: Fax: Corporate Location - Odessa, Texas Hwy 191 Midland, TX Phone: Fax: Casper, WY Perryopolis, Pennsylvania Phone: Fax: Oklahoma City, OK (Sales) Norman, OK Joshua, TX Houston, TX (Sales) Victoria, TX Service Locations Elmira, NY Perryopolis, PA Marietta, OH Canton, OH Victoria, Texas Phone: Fax: Elmira, New York Phone: Fax: Marietta, Ohio Phone: Casper, Wyoming Phone: Fax: Norman, Oklahoma Phone: Fax: Oklahoma City, Oklahoma Phone: WE RE STACKED Sales Locations Houston, Texas Phone: Johnstown, Colorado Phone: Denver, Colorado Phone: