2016/2017 Manufacturer s Directory PUBLISHES DECEMBER 2015
|
|
- Lucinda Reeves
- 6 years ago
- Views:
Transcription
1 ATTENTION SUPPLIERS: Stand out in the most thorough and comprehensive resource for fluid power information! ENGINEERING DATA: A unique reference volume and working tool for design and in-plant engineers. MANUFACTURERS SECTION: Users can locate manufacturers alphabetically by product type. DISTRIBUTORS/LOCAL SOURCES: An alphabetical listing of local sales outlets by state and city. TO BE INCLUDED: Complete the Company and Contact information below. Basic listings are available at no charge. Select the SIX complimentary categories that best define the products you offer. Additional categories may be purchased at $25 each. Display (half page or larger) and enhancement upgrade advertisers in this issue may select an UNLIMITED number of categories appropriate to their company at no charge. STAND OUT from the hundreds of other companies listed and increase your exposure with an Enhancement Upgrade! (see pages 2-3) Research shows that 94% of buyers prefer to specify/purchase advertised products, versus those that are not, even if the products are identical! Enhancements are available for both the print and online directory. Send your completed form and enhancement ad materials to listings@penton.com or fax to (See page 8 for digital artwork specifications.) Basic Listing Includes company name and contact info. Receives up to 6 categories in both print & online. Additional categories can be purchased at $25 each. Published Contact Information (for print) Company/Division: Address: City: State: Zip: Country: Phone: Toll-Free Phone (if applicable): _ Fax: Website: Non-Published Contact Information Company/Division: Address: City: State:_ Zip: Country: Phone: Your Your Name: Your Title: QUESTIONS? Contact Ronald Klimko at or ronald.klimko@penton.com To place your order, send completed listing forms (by ) to: Penton Buyers Guides Department FLUID POWER 9800 Metcalf Avenue, Overland Park, KS Page 1 of 9
2 2016/2017 Print Enhancements/Upgrades STAND OUT from other print listings and increase your exposure with an Enhancement Upgrade! And remember upgrade buyers recieve UNLIMITED* product categories and 10 total locations or branch offices at no additional charge! (* Unlimited categories applies only to the headquarters, not branches.) Choose from this selection of PRINT listing packages and order today. These are sample ads only. Not actual size. Add a Logo Add an Expanded Listing Add a 1 or 2 Call Ad Available in both the Manufacturer and Product Directories Available only in the Manufacturer Directory Available only in the Product Directory Promotes brand recognition Brand recognition with logo Promote your product or literature Stands out from a basic listing Full contact information 50-word company description Rates: B&W: $200 per logo 4-Color: $300 per logo Bolded listing Rates: B&W: $375 4-Color: $475 Draws attention Rates: 1-1/2 x 1 4-color ad: $340 Each additional 1 4-color ad: $ /2 x 1 B&W ad: $240 Each additional 1 B&W ad: $ /2 x 2 4-color ad: $430 Each additional 2 4-color ad: $350 Add a Footer Available only in the Product Directory Exclusive positioning! 1-1/2 x 2 B&W ad: $330 Each additional 2 B&W ad: $250 Your ad spans all columns, in full color Limited number available. Sold on a first come, first served basis. Indicate your category choice New name. Expanded Offerings. Rates: $725 each To place your order, send completed listing forms (by ) to: Page 2 of 9
3 Print Display Ads Please indicate the size of your display ad and your product category positioning request. Display Ad Rates Manufacturers Section FULL-PAGE HALF-PAGE 1/3-PAGE 1/4-PAGE $5,670 $3,970 $2,650 $1,800 Display Ad Placements Manufacturers Section # Display Ad(s) (ads will be placed as close to requested category as possible) Size of Ad Product Category Name (see category list on pages 5-7) Repeat Ad Will Send New Materials QUESTIONS? Contact Ronald Klimko at or ronald.klimko@penton.com To place your order, send completed listing forms (by ) to: Page 3 of 9
4 Online Enhancements Optimize your search results with Online Enhancement Packages designed to pre-sell your products while directing traffic to your website. Online Enhancements can be combined with print directory listing enhancements for an integrated directory package or purchased separately. Choose from this selection of ONLINE listing packages and order today. Basic Listing Company name & address (1 location) Purchase additional locations for $25 each Select up to 6 product categories Rate: No charge Gold Membership Full contact information (4 locations) Active web address link Full color logo on company page 150 word company description Unlimited product category listings Additonal information tabs Purchase additional locations for $25 each Rate: $540/year ADDITIONAL MARKETING OPPORTUNITIES Category Sponsorship (for Platinum members only) Featured Company (for Platinum members only) Banner Ad and Boombox Options Contact Ronald Klimko for details: (216) ronald.klimko@penton.com Platinum Membership Full contact information (10 locations) Active web address link Full color logo on company page 300 word company description Unlimited product category listings Full media package: photos, videos, audio clips, PDFs, product spotlights Priority placement with full color logo as featured supplier on search results page Targeted banner ad and boombox ad on your company page Additonal information tabs Rate: $960/year To place your order, send completed listing forms (by ) to: Page 4 of 9
5 A Basic Listing receives 6 categories at no charge. Additional categories may be purchased for $25 each. Display advertisers and Logo/Call Ad/Upgrade advertisers may choose *unlimited categories! (* Unlimited categories applies only to the headquarters, and not branches.) PLEASE VERIFY YOUR COMPANY CLASSIFICATION: Manufacturer Distributor Accumulators Accumulators, bladder Accumulators, non-separator Accumulators, other Accumulators, piston Actuators Actuators, rotary, hydraulic Actuators, rotary, pneumatic Brakes, hydraulic Brakes, pneumatic Clutches, hydraulic Clutches, pneumatic Grippers, hydraulic Grippers, pneumatic Grippers, vacuum (cups & pads) Indexing tables, rotary pneumatic Rotary actuators Air Preparation Drains, compressed air Dryers, compressed air, absorptive Dryers, compressed air, adsorptive (regenerative) Dryers, compressed air, chemical Dryers, compressed air, refrigerant Filters, pneumatic, coalescing Filters, pneumatic, general purpose FRL (filter, regulator, lubricator) modules Lubricators, airline Mufflers & silencers, pneumatic Receivers, pneumatic Regulators, pneumatic pressure Regulators, vacuum Compressors & Vacuum Pumps Compressors, air, diaphragm Compressors, air, oil-less Compressors, air, reciprocating Compressors, air, rotary screw Compressors, air, rotary vane Pumps, vacuum, mechanical Vacuum generators, venturi type Controls & Interfaces Coils, solenoid valve Connectors, electric Controllers, electrohydraulic Controllers, electropneumatic Controllers, motion Controllers, programmable logic Controls, pneumatic Logic components, counters Logic components, interface devices Logic components, moving parts Logic components, nonmoving parts Logic components, pneumatic programmers Logic components, pneumatic sequencers Logic components, pneumatic timers Logic components, proximity devices Joysticks, electrohydraulic Joysticks, electronic Joysticks, hydraulic Solenoids, valve, general purpose Solenoids, valve, proportional Cylinder Accessories & Components Cylinder hardware, clevises Cylinder hardware, piston rod cartridges Cylinder hardware, piston rod couplings Cylinder hardware, piston rod-end bearings Cylinder hardware, piston rod ends Cylinder hardware, piston & rod nuts Cylinder hardware, piston rods Cylinder tubing Cylinder tubing, aluminum Cylinder tubing, chromeplated Cylinder tubing, engineered plastic Cylinder tubing, fiberglass Cylinder tubing, seamless steel Cylinder tubing, stainless steel Cylinder tubing, welded steel Rod stock, chrome-plated Rod stock, steel & iron Cylinders Cylinders, adjustable stroke Cylinders, air powered, oil controlled Cylinders, custom Cylinders, ram Cylinders, rotating rod (swing) Hydraulic types Cylinders, hydraulic, braked Cylinders, hydraulic, cushioned Cylinders, hydraulic, double rod end Cylinders, hydraulic, high water content fluid Cylinders, hydraulic, low profile Cylinders, hydraulic, metric Cylinders, hydraulic, mill/ mine Cylinders, hydraulic, miniature Cylinders, hydraulic, non rotating rod Cylinders, hydraulic, non tie rod Cylinders, hydraulic, spring return Cylinders, hydraulic, square barrel Cylinders, hydraulic, telescoping Cylinders, hydraulic, tie rod Pneumatic types Cylinder slides Cylinders, pneumatic, braked Cylinders, pneumatic, cushioned Cylinders, pneumatic, double rod end Cylinders, pneumatic, low profile Cylinders, pneumatic, metric Cylinders, pneumatic, miniature Cylinders, pneumatic, non rotating rod Cylinders, pneumatic, non tie rod Cylinders, pneumatic, rodless Cylinders, pneumatic, spring return Cylinders, pneumatic, square barrel Cylinders, pneumatic, telescoping Cylinders, pneumatic, tie rod Fittings, Flanges, & Couplings Adaptors, flange Couplings, hose, permanent & reusable Couplings, quick-acting, hydraulic Couplings, quick-acting, pneumatic Fittings Fittings, barbed Fittings, double ferrule Fittings, flanged Fittings, flare Fittings, flareless Fittings, metric Fittings, O-ring seal Fittings, pipe Fittings, plastic Fittings, pneumatic Fittings, port, SAE O-ring boss Fittings, straight thread Fittings, test, hydraulic Flanges Flanges, SAE 2-bolt Flanges, SAE 4 bolt Flanges, split 4-bolt Flow restrictors (orifices) Swivel joints, hydraulic Swivel joints, pneumatic Page 5 of 9
6 Gauges & Measuring Devices Diagnostic & test equipment, hydraulic Diagnostic & test equipment, pneumatic Flow meters Gauge isolators Gauges & indicators, digital Gauges & indicators, flow Gauges & indicators, fluid level Gauges & indicators, hydraulic, pressure Gauges & indicators, pneumatic, pressure Gauges & indicators, temperature Particle counters Heat Exchangers Heat exchangers, air-cooled dry Heat exchangers, air-oil coolers Heat exchangers, aluminumfinned Heat exchangers, copper-finned Heat exchangers, shell & tube Heat exchangers, steel-finned Heat exchangers, water-cooled Hose & Tubing Hose assemblies, complete Hose assembly equipment Hose protectors (sleeves, wraps, boots, etc) Hose reels Hoses Hose, compressed air Hose, compressed air, coiled Hose, flexible metal Hose, hydraulic Hose, hydraulic, nonconductive Hose, plastic Hose & tubing clamps Tube bending, flaring tools, etc. Tubing, line Tubing, custom assemblies Tubing, line, metric Tubing, line, pipe Tubing, line, plastic Tubing, line, seamless steel Tubing, line, stainless steel Tubing, line, steel Tubing, line, welded steel Tubing, swaging equipment for Hydraulic Filters Filter carts Filters, hydraulic Hydraulic Fluids Fluids, hydraulic, environmental Fluids, hydraulic, petroleum Fluids, hydraulic, phosphate ester Fluids, hydraulic, polyol ester Fluids, hydraulic, silicone Fluids, hydraulic, synthetic blend Fluids, hydraulic, water-based Fluids, hydraulic, water glycol Fluids, hydraulic, water-in-oil emulsion Hydraulic Pumps & Accessories Adaptors & mounts, pump/engine Adaptors & mounts, pump/motor Gearboxes, pump drive Intensifiers, continuous action Intensifiers, single action Intensifiers, variable displacement Pumps, hydraulic Pumps, hydraulic, airoperated Pumps, hydraulic, fixeddisplacement Pumps, hydraulic, ganged Pumps, hydraulic, gear Pumps, hydraulic, high water contact fluids Pumps, hydraulic, manually operated Pumps, hydraulic, piston Pumps, hydraulic, plunger Pumps, hydraulic, screw Pumps, hydraulic, staged Pumps, hydraulic, vane Pumps, hydraulic, variabledisplacement Hydraulic Subassemblies Hydraulic power units, custom Hydraulic power units, standard Hydrostatic drive components Hydrostatic drive controllers Hydrostatic drive packages Power steering components & assemblies Manifolds, Plugs, & Hydraulic Integrated Circuits Hydraulic Integrated Circuits, complete Manifolds Manifolds, drilled metal block Manifolds, hydraulic Manifolds, laminar Manifolds, modular Manifolds, pneumatic Manifolds, rotating Port sealing plugs Motors Hydraulic Motors, hydraulic, bidirectional Motors, hydraulic, fixeddisplacement Motors, hydraulic, gear Motors, hydraulic, low-speed/high torque Motors, hydraulic, piston Motors, hydraulic, vane Motors, hydraulic, variabledisplacement Motors, hydraulic, water-based fluid Motors, hydraulic, wheel drive Motors, electric, integral horsepower Motors, electric, with pump flange mount Motors, electrohydraulic stepping Pneumatic Motors, pneumatic, low-speed/high torque Motors, pneumatic, piston Motors, pneumatic, vane Other Components Adaptors & mounts, overhung load Cleaning equipment for fluid power lines Couplings, flexible shaft Education & training equipment Lubrication components & systems Software, fluid power component selection Software, fluid power system design Reservoirs & Accessories Reservoir accessories, filter-breathers Reservoir accessories, magnets Reservoir accessories, sight gauges Reservoirs (tanks), custom Reservoirs (tanks), high water content fluid Reservoirs (tanks), petroleum Reservoirs (tanks), standard Separators, air/oil Seals & Related Components Boots & sleeves Elastomeric products, extruded Elastomeric products, molded Protective plugs & caps, metal Protective plugs & caps, plastic Rings, backup Rings, piston Rings, wear Rings, wiper Sealants, thread Seals, o-ring, elastomeric Seals, o-ring, metallic Seals, o-ring, plastomeric Seals & packings Seals & packings, braided Seals & packings, elastomeric Seals & packings, leather Seals & packings, metallic Seals & packings, piston Seals & packings, piston-rod Seals & packings, shaft Seals & packings, springloaded Seals & packings, synthetic Seals, rubber-edge composite Thread protectors Services Chrome plating Services, fluid analysis & testing boring cylinders honing motors pumps Page 6 of 9
7 valves valves, servo & proportional Technical training & service Shock Absorbers & Noise Suppressors Dampers, hydraulic Pulsation dampers, hydraulic desurger Pulsation dampers, hydraulic snubber Shock absorbers Suppressors, noise, hydraulic Switches & Transducers Load cells Switches Switches, flow Switches, limit Switches, liquid-level Switches, pressure Switches, proximity Switches, reed Switches, temperature Switches, vacuum Transducers Transducers, current-topressure (I/P) Transducers, flow Transducers, linear displacement Transducers, pressure Transducers, temperature Transducers, voltage-topressure (E/P) Valves Flow dividers, non-rotary Flow dividers, rotary Industrial Hydraulic Directional control control, ball control, manual control, pilot operated control, solenoid hydraulic pilot control, solenoid direct Flow control hydraulic, flow control, non-compensated hydraulic, flow control, pressure-compensated hydraulic, flow control, pressure/temperaturecompensated Relief hydraulic, relief hydraulic, relief, pilotoperated hydraulic, relief, servooperated Servovalves, electrohydraulic accumulator charge, bleed air bleed cartridge check check, pilot operated counterbalance deceleration high water content fluid modular pressure reducing priority flow proportional sequence servovalve surge damping timing unloading Mobile Hydraulic brake cartridge check, pilot-operated counterbalance directional control flow control multiple spool pressure control priority stacking CHECK THE APPROPRIATE BOX: I m placing a 1/2 page or larger display ad OR a logo/call ad/upgrade in this issue and am therefore entitled to unlimited categories at no charge. If I decide not to place this display ad, I understand that I will be billed for any additional categories selected. I will not be a placing a display ad or upgrade order in this issue. Please see my listing summary to the right. Orifices See fittings, flanges, & couplings Pneumatic Servovalves, electropneumatic Valves, aerospace, pneumatic check deceleration directional control, manual directional control, pilotoperated directional control, pressurecompensated directional control, solenoid directional control, solenoid pilot flow control pressure regulating proportional quick exhaust relief sequence two hand, no tie down Valves, aerospace, hydraulic CATEGORY SUMMARY Total categories checked above = _ Subtract six at no charge -6 Total additional categories = _ x $25 each Total to be invoiced for add l categories = _ To place your order, send completed listing forms (by ) to: Page 7 of 9
8 Please complete the information below if you would like to purchase UPGRADES/ENHANCEMENTS. 1. Add Your Logo Your Logo appears in either our Manufacturer Section or the Products Section Manufacturers Section Products Section Selecting Product Categories for your Company Logo If your logo is to appear in the Products section, be sure to clearly indicate the category in which each logo should appear: B&W $200 ea. Color $300 ea. Previous Advertisers Repeat Artwork Sending New Artwork Total $ 2. Expanded Listing Exclusively in our Manufacturer Section Provide a logo and 50 word company description. B&W logo $375 ea. Previous Advertisers Repeat Artwork Sending New Artwork Color logo $475 ea. Total $ 3. Call Ads - 1 or 2 Exclusively in our Products Section Available Sizes: 1-1/2 x 1 or 1-1/2 x 2 1 B&W $240 ea. (Each additional 1 B&W ad: $180) 1 4-color $340 ea. (Each additional 1 4-Color ad: $280) 2 B&W $330 ea. (Each additional 1 B&W ad: $250) 2 4-color $430 ea. (Each additional 1 4-Color ad: $350) Selecting Product Categories for your Call Ad Previous Advertisers Repeat Artwork Sending New Artwork Be sure to clearly indicate the product category in which each call ad should appear: Total $ 4. Footer Ad Exclusively in our Products Section Limited number of category positions available. $725 ea. Selecting Product Categories for your Footer Ad Be indicate the product category in which each footer should appear: Previous Advertisers Repeat Artwork Sending New Artwork Total $ To place your order, send completed listing forms (by ) to: Page 8 of 9
9 5. Online Options Basic Listing...included with print listing Company name, & address listed in 6 categories Additional categories...$25 Gold Membership...$540 Full contact information Full color logo on company page 150 word company description Unlimited product category listings Platinum Membership...$960 Full contact information Full color logo on company page 300 word company description Unlimited product category listings Full media package: photos, videos, audio clips, PDFs, product spotlights Priority placement with full color logo as featured supplier on search results page Targeted banner ad and boombox ad on your company page 6. Order Summary Subtotal for Logo(s) + Subtotal for Expanded Listing + Subtotal for Call Ad(s) + Subtotal for Footer Ad(s) + Online Listing + Subtotal for addtional paid categories + x $25 each Total Amount Due = Artwork Specifications Send materials to listings@penton.com by Print: Logos, Footers & Call Ads: Accepted files: Photoshop Illustrator Format: TIF EPS PDF (Prepress high resolution) Color: Send 4/C files in CMYK mode. Black & White: Send B&W ads in grayscale mode. Embedded Images: The MINIMUM resolution requirements are 300dpi. Images and logos from the Website are NOT usable for print. Online: Logos: Company Page logos will display at a 250 pixels x 250 pixels. Search Results and Feature Company logos will display at 120 pixels x 40 pixels. For best quality, logos should be submitted as JPEG, GIF, or PNG. File size should not exceed 15k. Photos: Photos will display as clickable thumbnails at 67 pixels x 67 pixels. The maximum number of images to display is 4. For best quality, images should be submitted as JPEG, GIF, or PNG with the maximum file size of 200k. Video Files: Video files should be a maximum file size of 75 MB. Acceptable formats are Windows, Quicktime, Flash and MP s.audio Files: Audio files should have a maximum file size of Authorization Signature: Date: Charge My Credit Card: Visa MasterCard American Express Discover OR Bill me at the address above. Credit Card Number: Exp. Date: Billing Address (if different from above): Cardholder Name (Print): Cardholder Signature: Date: *Your fax number is used to communicate to you. By providing your fax number, you are giving written permission to receive listing and other related information from Foundry Management & Technology that may be of interest to you by fax. We will not share this information or use it for any other purpose. Your may opt out of receiving faxes from us at any time in the future. ** Required for sending future listing information. Check here if you do not wish to receive future unsolicited fax advertisements at the fax number shown at the top of this page, please fax this page back to Alternately, you may phone us at or send an to fax-opt-out@penton.com. Our failure to comply with your removal request within the shortest reasonable time, as determined by the FCC, with such valid request identifying the telephone facsimile machine(s) to which the request relates would be unlawful. To place your order, send completed listing forms (by ) to: Page 9 of 9
Fluid Power Products, Including Aerospace 1999
Fluid Power Products, Including Aerospace 1999 Issued August 2000 MA333N(99)-1 (Formerly Series MA35N) Information about the scope of the survey, methodology, explanation of terms and historical notes
More informationAdvantage. Supplier of hydraulic, pneumatic, electrical and mechanical equipment, systems & components.
PRODUCTS & SERVICES Advantage Founded in 1963 as Exotic Rubber & Plastics Corp., Exotic Automation & Supply now serves as a key industrial partner to the world s leading manufacturers. We have grown to
More informationNumber Title Year Organization Page
Id Number Title Year Organization Page 365528 B93.1 Dimension Identification Code for Fluid Power Cylinders; Appendices I and II (NFP(A) T3.6.2-1964) R(1994) 365529 B93.2 Fluid Power Systems and Products
More informationPneumatics & Fluid Control. Industrial Hydraulics & Lubrication. Motion Control & Automation. Mobile Products. Engineered Systems & Services
Pneumatics & Fluid Control Industrial Hydraulics & Lubrication Motion Control & Automation Mobile Products Engineered Systems & Services ENGINEERED SYSTEMS & SERVICES Ball or roller screw integrated motor
More informationNomenclature... xi Hydraulic Laws, Theorems, and Equations...xii
Nomenclature... xi Hydraulic Laws, Theorems, and Equations...xii 1 Introduction 1.1 Component Design Perspective...1 1.2 Hydraulic Power Evolution...2 1.3 Hydraulic Applications...6 1.4 Component Design
More informationROBOTICS SAFETY MOTION & CONTROL. SENSORS, VISION & IIoT PNEUMATICS ELECTRICAL
MOTION & CONTROL ROBOTICS SAFETY SENSORS, VISION & IIoT PNEUMATICS ELECTRICAL Cedarburg Headquarters 7400 Quail Court P.O. BOX 860 Cedarburg, WI 53012 Weston Branch 4601-A Camp Phillips Rd Weston, WI 54476
More informationGPM Hydraulic Consulting, Inc. P.O. Box 689. Social Circle, GA Hydraulic Consulting, Inc
Hydraulic Consulting, Inc This special promotional CD is to demonstrate how your hydraulic troubleshooting manual can be ordered as an Adobe Acrobat ebook. It can be installed on any computer with the
More informationModule 5: Valves. CDX Diesel Hydraulics. Terms and Definitions. Categories of Valves. Types of Pressure Control Valves
Terms and Definitions Categories of Valves Types of Pressure Control Valves Types and Operation of Pressure Relief Valves Operation of an Unloading Valve Operation of a Sequencing Valve Operation of a
More informationFluid Power with Applications
Fluid Power with Applications Sixth Edition Anthony Esposito Professor Emeritus Department of Manufacturing Engineering Miami University Oxford, Ohio Prentice Hall Upper Saddle River, New Jersey Columbus,
More informationBe sure to order the correct number of elements: OLF 15 = 1, OLF 30 = 2, OLF 45 = 3, OLF 60 = 4
Replacement Elements OLF Offline Filters Model Code Micron Rating Media Type Part No. N15DM002 2 Dimicron 01251590 N15DM010 10 Dimicron 03115180 N15DM020 20 Dimicron 00349576 N15DM030 30 Dimicron 03048790
More informationPresenting Sponsor..$10,000 A $10,000 contribution will name your company as the Presenting Sponsor of the Lehigh Valley Walk to Defeat ALS.
Presenting Sponsor..$10,000 A $10,000 contribution will name your company as the Presenting Sponsor of the Lehigh Valley Company will be listed as the Presenting Sponsor of the Lehigh Valley Walk to Defeat
More informationANNIVERSARY 1977 to Cables & Connectivity. Machine Automation Components and Solutions
40 th ANNIVERSARY 1977 to 2017 Cables & Connectivity Machine Automation Components and Solutions Automation Simplified Automation doesn t have to be complicated. Automation must be as simple as possible,
More informationTest Which component has the highest Energy Density? A. Accumulator. B. Battery. C. Capacitor. D. Spring.
Test 1 1. Which statement is True? A. Pneumatic systems are more suitable than hydraulic systems to drive powerful machines. B. Mechanical systems transfer energy for longer distances than hydraulic systems.
More informationAppendix A. Standard Symbols for Hydraulic Components
Table B.1 Flow lines Appendix A Standard Symbols for Components Continuous flow E Pilot connection L L>10E E Drain connection L L
More informationIndustrial Mechanic (Millwright) Level 3
Industrial Mechanic (Millwright) Level 3 Rev. September 2005 Industrial Mechanic (Millwright) Unit: G5 Prime Movers I Diesel 1 Level: Duration: Three 60 hours Theory: 20 hours Practical: 40 hours Overview:
More informationHYDRAULICS PNEUMATICS AUTOMATION
Fluid Power Distributor & Manufacturer Since 1970 HYDRAULICS PNEUMATICS AUTOMATION DISTRIBUTORS DESIGNERS MANUFACTURERS COMPONENTS MANIFOLDS POWER UNITS SERVICE REPAIR INSTALLATION Mobile - Marine - Industrial
More informationTECHNICAL PAPER 1002 FT. WORTH, TEXAS REPORT X ORDER
I. REFERENCE: 1 30 [1] Snow Engineering Co. Drawing 80504 Sheet 21, Hydraulic Schematic [2] Snow Engineering Co. Drawing 60445, Sheet 21 Control Logic Flow Chart [3] Snow Engineering Co. Drawing 80577,
More informationJIS symbols used in this catalog are old symbols following JISB0125-1: Refer to JISB0125-1: 2007 or JFPS2011: 2006 for new symbols.
symbol s used in this catalog are old symbols following JISB0-: 00. Refer to JISB0-: 007 or JFPS0: 006 for new symbols. Page. Element of symbol. Line and port. Directional control valve. Pressure control
More informationContents. Index. Content
s MS motor - Range... 2 MS motor - Torque module... 3 MS motor - Valving cover... 4 MS motor - Multidisc brake... 5 MS motor - Bearing support... 6 MS motor - Drum brake... 7 Forklift truck drive axle...
More informationMechanical Engineering
Mechanical Engineering Stepper Motor Drive Full step controlling of stepper Motor Single step, low and high speed, Forward and Reverse Small stepper Motor with driver and Power Circuit Necessary Power
More informationHydraulics. Pneumatics. Electromechanical. Lubrication. Filtration. Fluid Connectors. Distribution. Systems Engineering. Custom Manifolds.
Hydraulics Pneumatics Electromechanical Lubrication Filtration Fluid Connectors Distribution Systems Engineering Custom Manifolds Power Units CNC Shop 24 hr Service & Repair Training On-Site Installation
More informationPRODUCT LINE CARD. Fluid System Components TM.
Fluid System Components TM PRODUCT LINE CARD A Product Line Guide Showcasing FSC as the Innovative Leader in the Distribution, Manufacturing and Assembly of Hydraulic & Electronic Systems and Components
More informationWheel Rail Interaction 2019 Sponsor Opportunities
Rail Transit Seminar Principles Course Heavy Haul Seminar Wheel Rail Interaction 2019 Sponsor Opportunities Railroader Attendance Up Again For 2019 The Wheel Rail Interaction Conference continues to attract
More informationPump model PVPP-*-3023 PVPP-*-3033 PVPP-*-4048 PVPP-*-5060 PVPP-* Max flow at 1500 rpm and 7 bar [l/min]
900 Table A0obs/E Axial piston pumps type PVPP, variable displacement, high pressure operation Hydraulic and electrohydraulic control obsolete components - availability on request PVPP-SLER-08/D PVPP are
More informationWheel Rail Interaction 2018 Sponsor Opportunities
Rail Transit Seminar Principles Course Heavy Haul Seminar Wheel Rail Interaction 2018 Sponsor Opportunities Railroader Attendance Up Again For 2018 The Wheel Rail Interaction Conference continues to attract
More informationP R O D U C T G U I D E
PRODUCT GUIDE HYDROPRESS company provides complete solutions for hydraulic industry from 20 years in Poland. Our philosophy is clear - to be the most complete supplier of high quality hydraulic components
More informationthree different ways, so it is important to be aware of how flow is to be specified
Flow-control valves Flow-control valves include simple s to sophisticated closed-loop electrohydraulic valves that automatically adjust to variations in pressure and temperature. The purpose of flow control
More informationSubject: Pneumatic Training Kit with portable Air Compressor
MSME TOOL ROOM: HYDERABAD (CENTRAL INSTITUTE OF TOOL DESIGN) Balanagar, Hyderabad 500 037 TEL.NO.23772747, 23776168 FAX No.0-4023772658 E-mail:citdpurchase@citdindia.org Visit us: www.citdindia.org. TENDER
More informationSms Products India Pvt Ltd
+91-8049471465 Sms Products India Pvt Ltd https://www.indiamart.com/smsproductsindia/ We SMS Products India (P) Ltd. are manufacturing a high quality assortment of Hydraulic Cylinders and Hydraulic Power
More information2. Hydraulic Valves, Actuators and Accessories. 24 Marks
2. Hydraulic Valves, Actuators and Accessories 24 Marks Co related to chapter 602.2 Describe working principle of various components used in hydraulic & pneumatic systems. 602.3 Choose valves, actuators
More informationADVANCED CUSTOMIZED ELECTRO PNEUMATIC TRAINER (PRODUCT CODE: SAP 20B)
The Advanced Customized Electro Pneumatic Trainer (SAP 20B) is capable of being used to demonstrate the design, construction and application of electro-pneumatic components and circuits. Objectives:- The
More informationREPAIR MANUAL AFX8010
REPAIR MANUAL AFX 1 27/05/2004 Contents INTRODUCTION DISTRIBUTION SYSTEMS POWER PRODUCTION POWER TRAIN TRAVELLING BODY AND STRUCTURE TOOL POSITIONING CROP PROCESSING A B C D E G K AFX 1 27/05/2004 INTRODUCTION
More informationGaskets & Gasketing. Gasketing, Gaskets & Joint Sealants. KLINGERsil Gasketing Material. GRAFOIL Gasketing Material.
PRODUCTS & SERVICES Fluid Power Industrial Grade Air and Hydraulic Cylinders Accumulators Parker Hydraulics Hydraulic Cylinders Parker, Miller, Schrader Piston Pumps Vane Pumps Gear Pumps Low Speed, High
More informationAUXILIARY COMPONENTS
CHAPTER 9 AUXILIARY COMPONENTS Fluid Power Circuits and Controls, John S.Cundiff, 2001 INTRODUCTION Discussion of the hardware needed to connect the various components (pumps, actuators, valves, accumulators,
More informationTruck Identification. Total Identity Solutions. Program Includes:
Truck Identification Show your company's capabilities wherever you go with high quality graphics and custom decal lettering. Program Includes: Van and Pick-Up Identification Decal Kits Van and Pick-Up
More informationCables & Connectivity. Machine Automation Components and Solutions
Cables & Connectivity Machine Automation Components and Solutions Automation Simplified Automation doesn t have to be complicated. Automation must be as simple as possible, flexible for future requirements,
More informationRailway Industry. Filtration Products and Solutions
Railway Industry Filtration Products and Solutions Class and Light Rail Locomotives FBO Fuel Filters Bulletin No. 7648 Offering versatility, these filter vessels will accept a wide range of Microfilters,
More informationDefinitions of Technical Terms
Definitions of Technical Terms ABSOLUTE A measure having as it s zero point of base the complete absence of the entity being measured. ABSOLUTE PRESSURE A pressure scale with zero point at a perfect vacuum.
More informationEASA GRAPHIC STANDARD
EASA GRAPHIC STANDARD EASA 1331 Baur Blvd, St. Louis, Missouri 63132 +1 314 993 2220 www.easa.com easainfo@easa.com Contents... 3 The EASA Logo... 4 EASA Logo Color... 5 EASA Logo Grayscale & Reverse...
More informationpowertransmissionengineering MEDIA KIT Your Guide to Reaching Power Transmission & Motion Control Components Buyers
PTE powertransmissionengineering 2012 MEDIA KIT Your Guide to Reaching Power Transmission & Motion Control Components Buyers Hit Your Target with Power Transmission Engineering and powertransmission.com
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More informationThe Hydraulic Warehouse Australian Distributor of Quality Hydraulic Brands
Product RANGE The Hydraulic Warehouse Australian Distributor of Quality Hydraulic Brands The Hydraulic Warehouse is Australia s leading distributor of quality hydraulic brands. Based in Sydney Australia,
More informationCCE Truck Identification
CCE Truck Identification Show your company's capabilities wherever you go with high quality graphics and custom decal lettering. Program Includes: Van and Pick-Up Identification Decal Kits Van and Pick-Up
More informationAir/Hydraulic Actuators
Air/Hydraulic Actuators master cylinders, stem seal master cylinders, and stem seal actuators with air chambers Convert Air Pressure to Hydraulic Pressure Air/Hydraulic Actuators Catalog Index Foreword..................
More informationTHE CUSHMAN GALA PRESENTS. Masquerade. Ball APRIL 27, 2019 FONTAINEBLEAU HOTEL
THE PRESENTS Masquerade Ball APRIL 27, 2019 FONTAINEBLEAU HOTEL JOIN US FOR THE Masquerade Ball APRIL 27, 2019 FONTAINEBLEAU HOTEL 4441 Collins Ave Miami Beach, FL 33140 6:30 PM The Cushman School Gala
More informationUltra-High Energy Absorption SC 25 to SC 650 Heavyweight Shock Absorbers. Featuring New SC 25, 75 & 190 Models Features...
Ultra-High Energy Absorption SC 5 to SC 650 Heavyweight Shock Absorbers Featuring New SC 5, 75 & 190 Models Features. Piston Tube Design for Long Cycle Life Stainless Steel Piston Rod Integral Mechanical
More informationWhat does pressure refer to in relation to hydrostatics and what is it dependent on?
Question 1 [3 Marks] What does pressure refer to in relation to hydrostatics and what is it dependent on? Question 2 [14 Marks] Make a circuit diagram of a regular hydraulic plant that is used to control
More informationA system of lubricant dispensing devices (oil or grease) connected by piping to a central pumping unit that is operated automatically or manually.
Air/Oil Systems: A lubrication system in which small measured quantities of oil are introduced into an air/oil mixing device which is connected to a lube line that terminates at a bearing, or other lubrication
More informationChapter B-3. Chapter 3. Actuators and output devices. Festo Didactic TP101
155 Chapter 3 Actuators and output devices Festo Didactic TP101 156 An actuator is an output device for the conversion of supply energy into useful work. The output signal is controlled by the control
More informationGlossary. Visit Us Online: ABSOLUTE A measure having as its zero point or base the complete absence of the entity being measured.
ABSOLUTE A measure having as its zero point or base the complete absence of the entity being measured. ABSOLUTE PRESSURE (psia) The pressure above absolute zero, the sum of atmospheric and gauge pressure.
More informationPRODUCT GUIDE INDUSTRIAL AUTOMATION ROBOTS / DRIVE PRODUCTS / SAFETY PRODUCTS / ELECTRICAL PRODUCTS INDUSTRIAL GROUP
INDUSTRIAL GROUP PRODUCT GUIDE Service N Solutions... it s in the name! SNS Industrial Group is NOT just another company which sells products. We are people working with people to explore and provide the
More informationSHOCK ABSORBER/DAMPER TESTING MACHINE
SHOCK ABSORBER/DAMPER TESTING MACHINE Dampening force of a shock absorber is directly proportional to velocity and this parameter needs to be precisely controlled. A small variation of 1mm in a stroke
More informationDouble Acting & Spring Return. SERIES 92/93 Rack & Pinion PNEUMATIC ACTUATOR. The High Performance Company
PNEUMATIC ACTUATOR SERIES 92/93 Rack & Pinion Double Acting & Spring Return The High Performance Company SERIES 92/93 Styling, strength, compactness, and simplicity of design have been combined to produce
More informationMRO Systems and Retrofits for Industrial & Manufacturing Applications
www.cmafh.com MRO Systems and Retrofits for Industrial & Manufacturing Applications Hello! Are you aware that CMAFH serves the MRO industry with custom designed systems and retrofits relating to fluid
More informationNote: For use with hydraulic fluids other than those listed above, please consult Yuken representative in advance.
PRESSURE CONTROLS Fluid Types Any type of hydraulic fluids listed in the table below can be used Petroleum base oil Synthetic Fluids Water Containing Fluids Use equivalent to ISO VG32 or VG46. Use phosphate
More informationI) Clamping the work piece II) Drilling the work piece. III) Unclamping the work piece. 10
Seventh Semester B.E. III IA Test, 2014 USN 1 P E M E PES INSTITUTE OF TECHNOLOGY (Bangalore South Campus) (Hosur Road, 1KM before Electronic City, Bangalore-560 100) Department of Mechanical Engineering
More informationMaintenance Instructions & Parts List
PM-PTR/LTR-C Automation Actuator Division Wadsworth, Ohio 448 October 7, 993 Rev. October 999 PTR/LTR Series Actuators Maintenance Instructions & Parts List Provide Model Number and Serial Number When
More informationLearning System for Automation and Communications. Electropneumatics. Workbook Basic Level S1 K1 K1 Y1
Learning System for Automation and Communications Electropneumatics Workbook Basic Level 1 2 3 S1 K1 K1 S2 K1 094005 Order no. 094005 Description: TEACHW.E-PNEUM. Designation: D.S201-C-GB Edition: 08/1993
More informationDidactic and technological innovation at the service of training in pneumatics and electro-pneumatics have resulted in the creation of the
Didactic and technological innovation at the service of training in pneumatics and electro-pneumatics have resulted in the creation of the PNEUTRAINER-200 system. A fully modular system designed for the
More informationSAP E & C ADVANCED CUSTOMIZED ELECTRO PNEUMATIC TRAINER (FOR ITI) (PRODUCT CODE: SAP 20B-I)
The Advanced Customized Electro Pneumatic Trainer (SAP 20B-I) is capable of being used to demonstrate the design, construction and application of electro-pneumatic components and circuits. Objectives:-
More informationDamper Seal Kit Seal Kit Strainer Seal kit Seal Kit Element
www.westxl.com Sandvik Parts Part No. Description Qty Available 00290840 Gasket 3 00298830 Gasket 5 00641800 Plug pito jaw 2 00668970 Spacer 4 00668980 Shim 2 00669000 Shim 2 00670210 Handle 1 00670370
More informationITT Industrial Products
ITT Industrial Products Providing custom industrial solutions to meet customers application needs globally. ITT Control Technologies GmbH under the ITT Enidine brand provides quality energy absorption
More informationCH.4 Basic Components of Hydraulic and Pneumatic System/16 M HAP/17522/AE5G
Content : 4.1 Hydraulic and Pneumatic actuators. 10 Marks Hydraulic Actuators - Hydraulic cylinders (single, double acting and telescopic) construction and working, Hydraulic motors (gear and piston type)
More informationE70PL4EEC 1999 : CAMSHAFT [1/23] Page 1 of 49
E70PL4EEC 1999 : CAMSHAFT [1/23] Page 1 of 49 E70PL4EEC 1999 : CAMSHAFT [1/23] 1 5030657 1 CAMSHAFT 2 5030658 1 PLATE, Camshaft thrust 3 5030549 1 SEAL, Camshaft 4 5030989 2 BOLT, Plate 5 5030663 8 ARM,
More informationModular. Compact. Loadable. HLM Stroke Module
HLM Modular. Compact. Loadable. HLM Stroke Module Linear module with optimized overall length, pneumatic drive and scope-free pretensioned junction rollers. Field of Application For lifting of workpieces
More informationContents. Index. Content
s MS MOTOR [MS MOT] - Range... 2 MS MOTOR [MS MOT] - TORQUE MODULE [TORQ MODULE]... 3 MS MOTOR [MS MOT] - Valving cover... 4 MS MOTOR [MS MOT] - Multidisc brake... 5 MS MOTOR [MS MOT] - BEARING SUPPORT
More informationspeed hydraulic motors. Permission granted to reproduce for educational use only. Contrast the operation of fixed- and variable-
Chapter 9 Actuators Workhorses of the System 1 Objectives Describe the construction and operation of basic hydraulic cylinders, limited-rotation actuators, and motors. Compare the design and operation
More informationHYDROMODEL-200. Implements and controls hydraulic and electro-hydraulic circuits. Transparent Hydraulics - Electro-hydraulics
HYDROMODEL-200 Transparent Hydraulics - Electro-hydraulics Hydraulic and electro-hydraulic technology at a glance Implements and controls hydraulic and electro-hydraulic circuits www.smctraining.com training@smctraining.com
More informationHydraulic Master Cylinders
Hydraulic Master Cylinders flange mount and side mount, straight-bore and two-stage cylinders Hydraulic Cylinders for Mobile and Industrial Applications Why choose MICO? MICO, Incorporated designs, manufactures
More informationCOMPRESSOR UNIT, ROTARY: AIR, TRAILER MOUNTED, 250 CFM P-250-WDM-H268 (NSN )
ARMY TM 5-4310-452-24P MARINE CORPS TM 08917A-24P TECHNICAL MANUAL UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND
More informationSECTION DOMESTIC-WATER PACKAGED BOOSTER PUMPS
SECTION 221123.13 - DOMESTIC-WATER PACKAGED BOOSTER PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationGPM Hydraulic Consulting, Inc. P.O. Box 689. Social Circle, GA Hydraulic Consulting, Inc
Hydraulic Consulting, Inc This special promotional CD is to demonstrate how your hydraulic troubleshooting manual can be ordered as an Adobe Acrobat ebook. It can be installed on any computer with the
More informationZemarc Corporation Quality Defines Success
Authorized Distributor Zemarc Corporation Quality Defines Success (323) 721-5598 sales@zemarc.com www.zemarc.com Zemarc Offers Parker-Hannifin Hydraulic Pumps & Motors Pneumatic Products Instrumentation
More informationUniversal Fluid Power Trainer (UFPT)
Universal Fluid Power Trainer (UFPT) Milwaukee School of Engineering Applied Technology Center TM Department of Professional Education The UFPT is a modular, smart and unique fluid power and motion control
More informationModule 6 Assignment Part A
Module 6 Assignment Part A TOTAL MARKS Part A = 192 TOTAL QUESTIONS Part A = 36 Question 1 [3 Marks] What does pressure refer to in relation to hydrostatics and what is it dependent on? Question 2 [14
More informationFluid Cooling Industrial COLW Series
Fluid Cooling Industrial COLW Series 0916 COPPER & STEEL CONSTRUCTION Performance Notes Ideal for independent cooling and filtering of system oils Utilizes a high efficient EK series shell & tube (finned
More informationTORC SERIES COMPETITION RULES FOR SPORTSMAN 1600 BUGGY
TORC SERIES COMPETITION RULES FOR SPORTSMAN 1600 BUGGY DEFINED AS- A limited 4-wheel vehicle utilizing a type-1, 1600 c.c. Volkswagen air-cooled engine with one person in the vehicle. Division rules supersede
More informationOLEOIDRAULICA RACCOMANDAZIONI CETOP ELIMINATE & CORRISPONDENTI NORMATIVE ISO
OLEOIDRAULICA RACCOMANDAZIONI CETOP ELIMINATE & CORRISPONDENTI NORMATIVE ISO Rif/Data Titolo & Normativa(e) ISO collegata(e) R 6H 1979 Pipe couplings for hydraulic piping - coupling thread 1996 - see ISO
More information60 76 A Body Mopar Power Disc Conversion Installation Instructions
62-72 B & E BodyMopar 60 76 A Body Mopar Power Disc Conversion Installation Instructions Special A-Body only parts shown below (In addition to parts above for A-Body cars, part # MDC66DC & MDC46DC) Your
More informationC05 Short Stroke Cylinders
Linear Actuators P1G Cylinders Ø6, 10 & 16mm Bore sizes Non-lube operation Corrosion resistant design Integral mounting thread Compact construction Single acting as standard. Catalogue No. PDE2571TCUK-ul
More informationTable of Contents. Page. See Catalog and Product Updates on our Website
2 Table of Contents Page Sapphire Orifice Assemblies... 3-5 Metal Orifice Assemblies - Barb Connections... 6-7 Metal Orifice Assemblies - NPT Connections... 8-9 Metal Orifice Assemblies - Inserts... 10-13
More informationInstrumentation. Visit Us Online WE DO MORE THAN INDUSTRIAL. WE DELIVER TOTAL SOLUTIONS For Panel Fabricators
WE DO MORE THAN INDUSTRIAL. WE DELIVER TOTAL SOLUTIONS. Moody Price LLC moodyprice@moodyprice.com 225-767-7755 225-763-6005 18320 Petroleum Drive, Baton Rouge, LA 70809 Visit Us Online 800-272-9832 Instrumentation
More informationSporlan V-Series Ruby Seat Solenoid Valves
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Sporlan V-Series Ruby Seat Solenoid Valves Bulletin 30-10-8, October
More informationPNEUTRAINER-400 Pneumatics - Electropneumatics
PNEUTRAINER-400 Pneumatics - Electropneumatics End-to-end solution for training in pneumatics and electro-pneumatics SMC industrial systems components on panel mounting plate Implements and controls pneumatic
More informationPneumatic Power Valves Series 75/76 Manual, Mechanical, Pneumatic and Electric Valves
Quic-Pics Catalogue Pneumatic Power Valves Series 75/76 Manual, Mechanical, Pneumatic and Electric Valves Contents: Product Line Overviews 2 Manually Operated Valves 5 Pushbuttons 6 Toggle Switch 8 Knob
More informationSystem Solutions For. Marine Applications. Parker On Board, Around the World
System Solutions For Marine Applications Parker On Board, Around the World Marine Applications: A Focus Providing Components and Complete System Solutions Parker is the one choice for motion control and
More informationFor system diagrams and component identification
Pneumatic Symbols For system diagrams and component identification Contents Standards Actuators Basic symbols Valve symbol structure t Functional elements Flowlines Connections Conditioners and plant Pressure
More informationLaw Enforcement Price List
March 27, 2017 Price List Law Enforcement Price List All Benelli Law Enforcement products are on our current BuyBoard contract Personal Purchase Price Agency Purchase Price* Benelli Nova Tactical Shotgun
More informationForm No , 9 5, 6. Parts List for: X1A1 AIR DRIVEN WITH REMOTE CONTROL HYDRAULIC PUMP. Max. Capacity: 10,000 PSI
Form No. 101249 Parts List for: X1A1 AIR DRIVEN WITH REMOTE CONTROL HYDRAULIC PUMP Max. Capacity: 10,000 PSI Air Motor Assembly See sheet 3 of 6 13 12 1 11 10 8, 9 Basic Pump Assembly See sheet 4 of 6
More informationMF100 SPECIFICATIONS & FEATURES
MF100 SPECIFICATIONS & FEATURES Introduction The MF100 series simulators are the most technologically advanced hydraulic training systems currently available for teaching Basic Hydraulics through Advanced
More informationHS CYCLIC CUM STATIC TRIAXIAL TEST SYSTEM
HS28.610 CYCLIC CUM STATIC TRIAXIAL TEST SYSTEM Meets the essential requirements of ASTM-5311/3999 Introduction The system is a highly advanced combination of hydraulic and pneumatic technology where σ1
More informationDenison GOLD CUP Product Catalog Piston Pumps & Motors For Open & Closed Circuits
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Denison GOLD CUP Product Catalog Piston Pumps & Motors For Open & Closed
More informationPA 52 HY REACH. Mk2 Models. Parts Manual. Publication 490 October 2005 Part No Revision:
Publication 490 October 2005 Part No. 41570.90 Revision: 07.11.08 PA 52 HY REACH Mk2 Models Parts Manual For best performance USE ONLY McCONNEL SERVICE PARTS To be assured of the latest design improvements
More informationCompact Hydraulics. Compact Hydraulics GoTo Europe
1 Compact Hydraulics Bosch Rexroth stands out in the worldwide Compact Hydraulics market thanks to innovative technologies that grant improved performances and cost effective solutions. Compact Hydraulics
More informationSprague Air Driven Pumps, Gas Boosters & Power Units
Sprague Air Driven Pumps, Gas Boosters & Power Units 0115 About Sprague Sprague air driven liquid pumps, gas boosters and power units have been providing high pressure solutions to the oil and gas, process
More informationSRU-mini. Application example. Pneumatic Rotary Actuators Universal Rotary Actuators. Weight 0.15 kg 0.65 kg. Torque 0.16 Nm 1.
SRU-mini Sizes 8 14 Weight 0.15 kg 0.65 kg Torque 0.16 Nm 1.15 Nm Axial force 255 N 330 N Bending moment 2.5 Nm 4.5 Nm Application example Reversing unit for the economical reorientation of cylindrical
More informationFDXS Series. required at temperatures below 0 C (32 F) None required, or ISO VG32. 0 ~ 5mm Standard with rubber bumper (both sides)
Bulletin FDXS-09 Features 1. Magnetic piston is standard in all sizes. 2. Non-rotating design enables precision positioning. ng. 3. Compact design saves space. 4. Suitable for multi-axis assemblies and
More informationMP18 Stacking Valve System Technical Information Manual
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service MP18 Stacking Valve System Technical Information Manual The Drive & Control Company Copyright 1996 Bosch
More informationA MorrellGroup Company
A MorrellGroup Company WORLD-CLASS PRODUCTS, MANUFACTURING & INTEGRATION With full service design and engineering services, a line card comprised of the machine and motion control industry s most trusted
More informationEngex Power.
+91-8042957852 Engex Power https://www.engexpower.in/ We are one of the leading traders of a wide range of optimum quality Gas Generators and Control Valves. Owing to their robust design, impeccable finish,
More information