SALEEN SPEEDLAB BOOST AND WATER TEMPERATURE GAUGE POD KIT
|
|
- Darleen Green
- 6 years ago
- Views:
Transcription
1 = SALEEN SPEEDLAB BOOST AND WATER TEMPERATURE GAUGE POD KIT INSTALLATION MANUAL: Mustang 4.6L 3V P/N: C12000B KIT P/N: B11511* Saleen Performance, Inc East Maple Rd. Troy, MI
2 IF YOU ARE NOT EXPERIENCED IN THE AREA OF AUTOMOTIVE MECHANICS, WE STRONGLY URGE THAT YOU REFER THIS INSTALLATION TO A CERTIFIED INSTALLER OR TECHNICIAN 2
3 Saleen Speedlab Gauge Pod Kit Installation Guide for '05 to '09 Mustang 4.6L 3V Thank you for buying the Saleen Speedlab Gauge Pod Kit for the '05 to '09 Mustang with the 4.6L 3-valve motor. We appreciate your business, and we hope you enjoy your product. For your benefit, please read the following instructions completely and thoroughly before attempting to install the gauge pod kit. Many questions we have received from customers about the installation of our products could have been easily solved by information listed in the accompanying installation guide. We want you to enjoy the product in its fully functional state, and reading this tutorial is the first step to getting you on your way to a more rare and better performing Mustang. NOTE: Please keep all hardware you remove from your stock Mustang, as much of it will be reused to install the new exhaust kit pieces. Again, thank you for choosing Saleen! 3
4 Table of Contents I Interior Panel Removal 7 II Gauge Pod Wiring Harness Installation (part 1) 9 III Gauge Pod Wiring Harness Installation (part 2) 11 IV Intercooler Water Temperature Sender Assembly 12 V Intercooler Water Temperature Assembly Installation 14 VI Gauge Pod Wiring Harness Installation (part 3) 16 VII Temperature Sender/Hose Assembly Installation 18 VIII Boost Sender Wire Hookup 20 IX Gauge Pod Hole Drilling 22 X Gauge Pod Wiring Harness Installation (part 4) 23 XI Gauge Pod Attachment to Dashboard 24 4
5 B11158* GAUGE POD ASSY 1 EACH C11150* Gauge 0-10 PSI, boost interim 1 EACH BOOST PRESSURE SENDING UNIT 1 EACH C11151* Gauge WATER TEMP INTERIM 1 EACH C11201 BRACKET, GAUGES 1 EACH B11157* GAUGE POD HOUSING ASSY 1 EACH C11156 HOUSING, GAUGE POD INTERIM 1 EACH C11159* CLIP, INTERIOR PANEL 2 EACH C11401* TAPE VHB THK 1" WIDE 1 INCH B11208 HARNESS, GAUGE POD 1 EACH C09017* TERMINAL, RING 1/4 ID 18 AWG 1 EACH C07071* PVC NON-SHRINK SLEEVING 3/8 BLACK 49.5 INCH C06305* WIRE, 18 AWG YELLOW 131 INCH C06435* WIRE, 18 AWG GREEN 145 INCH C09115* QUICK CONNECT, FEMALE 1/4 4 EACH C6368* WIRE 18 AWG RED 80 INCH C06304* WIRE 18 AWG BLACK 100 INCH C06414* WIRE 18 AWG YELLOW/DK BLUE 86 INCH C09015* PVC NON-SHRINK SLEEVING 1/4 BLACK 60 INCH C09077* HEAT SHRINK, DUAL WALL 3/4 4 INCH C11210* TERMINAL, RING #10 STUD ID 18 AWG 8 EACH C06300* HEAT SHRINK DUAL WALL 1/8 BLACK 46 INCH B11487 MOLDED HOSE S/C TANK TO PUMP MOD 1 EACH C09857 MOLDED HOSE S/C TANK TO PUMP 1 EACH B11164* WATER TEMP. SENDER ASSY 1 EACH C11152* SENDER, WATER TEMPERATURE 1 EACH C11211* UNION TEE, 1/2 NPT 1 EACH C11212* HOSE BARB TO MALE PIPE, 3/4 TO 1/2 NPT 2 EACH C11213* BUSHING, 1/8 FEMALE NPT TO 1/2 MALE NPT 1 EACH C06871* ADEL CLAMP 1" 1 EACH C10068* HOSE CLAMP MOLDED HOSE S/C 2005 MUSTANG 2 EACH C09017* TERMINAL, RING, 1/4" ID 18 AWG 1 EACH C06304* WIRE, 18 AWG BLACK 12 INCH C11621* TERMINAL, RING, 1/2" STUD 16-12AWG 1 EACH C11620* WASHER FLAT 1/2 ID.062" THK AL 1 EACH 5
6 OBTAIN THE FOLLOWING TOOLS: Drill 1/8 bit Soldering iron Crimp Tool Wire stripper 1/2 Teflon tape 7/8 wrench 12mm wrench 5/16 deep socket wrench 10 mm socket wrench Vice Philips head screwdriver, #2 drive Flat head screwdriver 7 mm nut driver wire dikes Hose Cutter ¼ drive ratchet 10 mm socket, ¼ drive Flashlight Hose clamp pliers 90 degree drill 3/16 bit with drill stop L letter bit with drill stop 5/16 bit with drill stop 1 hole saw ½ wide electrical tape Torque seal 3M Automotive Adhesion Promoter (3M#06396) NON-VOC silicon sealant 6
7 I Interior Panel Removal Obtain the following tools: Philips head screwdriver Flat head screwdriver 7 mm nut driver Order of Operations: 1. Remove the shifter boot. See FIGURE Remove the two Phillips screws under the center armrest. See FIGURE Remove center console panel by pulling up at the front there are two clips. See FIGURE Remove both side panels by pull them straight back towards the rear of the vehicle. See FIGURE 4. Figure 1 Figure 2 Figure 3 Figure 4 7
8 5. Remove the 6 bolts that hold the waterfall panel to the instrument panel. (FIGURE 5). 6. Remove the 3 electrically connectors on the top of the panel. Remove the two lower connectors, and remove panel. (FIGURES 6,7,8) 7. Remove the 4 glove box door bolts. 8. Remove the glove box. (FIGURE 9) 9. Remove the 4 radio screws and gently lay the radio down in the center waterfall. Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 8
9 II Gauge Pod Wiring Harness Installation (part 1) Obtain the following tools: Wire dikes NON-VOC silicon sealant Order of Operations: 1. Remove the passenger wheel well liner. Using a pair of dikes, cut the very end of the rubber nipple on the grommet that is located at the back of the wheel well. Do not remove the entire nipple. (FIGURE 1) 2. With the passenger side kick panel removed, feed only the end of the harness with the two leads through the rubber nipple into the passenger foot well. (FIGURE 2) 3. Stop pulling the harness when you feel the middle section of the harness stop against the nipple. Using NON-VOC silicon, seal the harness and rubber nipple. (FIGURE 3) Figure 1 Figure 2 Figure 3 9
10 4. Route the harness along the stock Ford harness, have the leads come out where the windshield washer bottle fill neck is. See FIGURES 4, 5, 6, Secure the harness with 3 zip-ties in locations shown in FIGURES 4,5. Figure 4 Figure 5 Figure 6 Figure 7 10
11 III Gauge Pod Wiring Harness Installation (part 2) Order of Operations: 1. Route the harness that you fed into the foot well along the outside of the foot well, towards the radio and center console, as shown in FIGURES Route the harness as shown in FIGURE 4 ensuring that the harness is on the outside of the metal radio bracket. (FIGURE 5 is an overview) 3. Route the end of the harness with the zip-tie leads up and through the two 1 holes in the dashboard. Feed the zip-tied lead that contains the green wire through the left hand side hole. Feed he zip-tied lead that contains the yellow wire through the right hand side hole. (FIGURE 5) Figure 1 Figure 2 Figure 3 Figure 4 Passenger s door Figure 5 Figure 6 11
12 IV Intercooler Water Temperature Sender Assembly Part Number Description Qty C11152* Sender, Water Temperature C11621* Terminal, Ring, 1/2" Stud 16-12AWG C11211* Union Tee, 1/2 NPT C11212* Hose Barb To Male Pipe, 3/4 To 1/2 NPT C11213* Bushing, 1/8 Female NPT To 1/2 Male NPT C09017* Terminal, Ring, 1/4" Id 18 AWG C06304* Wire, 18 AWG Black 1 ft C11620* Washer Flat 1/2 ID.062" Thk Al 1 Obtain the Following Tools: Soldering iron Crimp Tool Wire Stripper 1/2 Teflon tape 7/8 & 12mm wrenches Vice Order of Operations: 1. Wrap Teflon tape on the threads of Part # s C11211*, C11212*, C11213*, C11152*. 2. Solider the 1/2 ID Ring terminal ( C11621*), to the black ground wire ( C06304*). Crimp a 1/4" ID ring terminal, ( C09017*) to the opposite end. (FIGURE 2) 3. Using a vice tighten all the fittings securely, so they do NOT leak fluid. 7/8 wrench is needed. Figure 1 Figure 2 12
13 4. Place one 1/2" Flat Washer, PN: C11620*, than the 1/2" ID Ring terminal that has been solider to the Black wire, over the Temp. sender, PN: C11152*. Screw the Temp. sender into the assembly and tighten securely, so that it does NOT leak fluid. A12mm wrench is needed. Ensure that the wire is positioned straight back, in-line with the fittings. (FIGURE 3). Figure 3 13
14 V Intercooler Water Temperature Assembly Installation Part Number Description Qty C10068* Hose Clamp Molded Hose S/C 2005 Mustang C09857C Molded Hose S/C Tank To Pump C06871* Adel Clamp 1" 1 Obtain the Following Tools: Hose Cutter Flat head Screwdriver Hose clamp pliers Order of Operations: 1. Cut the hose PN: C09857C, 10.5 from the beginning of the curved section (Figure 1) and 2 from the end of the straight section (Figure 2). Than remove 2 from the end of the newly cut portion. Discard the 2 section. See FIGURES 1, 2. This part is now referenced as B Figure 1 2 Figure 2 14
15 2. Place PN: C10068* HOSE CLAMP MOLDED HOSE S/C 2005 MUSTANG, over each hose piece. Push the hose ends onto the Water Temp. Sender Assy. PN: B11164* (ODS-5096). Slide both hose clamps on. Orientate the Water Temp. Sender Assy as shown in FIGURE. 4. Orientate the hose clamp so that the tabs are pointing up. 3. Slide the Adel clamp PN: C06871* over the hose as shown in FIGURE 4. Figure 3 Figure 4 15
16 VI Gauge Pod Wiring Harness Installation (part 3) Obtain the Following Tools: ¼ drive ratchet 10 mm socket, ¼ drive Soldering iron Electrical tape Flashlight Order of Operations: 1. Using a 10 mm socket with the ¼ drive ratchet, remove the stock ground bolt as shown in FIGURE 1 the bolt is located behind the glove box, which was removed on page Attach the black ground wire to the bolt and reinstall the bolt. 3. Unplug the small Blue Connector from the SJB box; the SJB box is located behind the passenger side kick panel. (FIGURE 2) 4. On the small Blue Connector find the Yellow / Blue wire*, ensure that the wire is going to PIN # 6. Splice the Orange / Blue Saleen harness wire into the Ford Yellow / Blue wire* using solider, than electrical tape. Plug the connector back in. * The wiring color has changed for 2007 to 2008 Mustangs. The wire is now an Orange w/ blue stripe wire. It will match the Orange w/ Blue stripe wire on the gauge pod wire. Figure 1 Figure 2 16
17 4. Unplug the large connector from the SJB box. Remove the plastic wiring guard from the back of the connector by squeezing and pulling outward. Locate the pin on the connector that contains TWO Red/Yellow wires. (NOTE: THERE IS ANOTHER PIN LOCATION CONTAINING ONLY ONE RED/YELLOW WIRE, THIS IS NOT THE CORRECT WIRE). See FIGURES. 3, Splice the red Saleen harness wire into one of the two stock Ford Red/Yellow wires at the correct pin location (see step 4) using solder, then electrical tape. Reinstall the plastic wiring guard. 6. Plug the connector back in. Figure 3 Figure 4 17
18 VII Temperature Sender/Hose Assembly Installation Part Number Description Qty B11487 Molded Hose S/C Tank To Pump Modified C10068* Hose Clamp Molded Hose S/C 2005 Mustang C11034* Capscrew PAN HD #8x1/2" PHIL Zn PL 1 Obtain the Following Tools: 5/16 deep socket wrench, ¼ drive 10 mm socket wrench Hose clamp pliers Phillips head screwdriver, #2 drive ¼ drive ratchet Order of Operations: 1. Route the molded hose (S/C Tank To Pump) you modified on page 14 (P/N C10068* becomes B11487A) by first unplugging the 3 PCM connectors (three arrows in FIGURE 3) and the PCM harness connector that is under the top radiator hose (FIGURE 4), and moving to the RH side. Slide the Hose between the PCM and underneath the Fuse box. (FIGURES 1,2,3). 2. Connect the intercooler tank to the hose and use the correct hose clamp ( C10068*). Connect the pump end of the hose to the pump, using the hose clamp ( C10068*). 3. Using a ¼ drive ratchet and 5/16 deep socket, attach the ring terminal that is connected to the yellow wire to the temperature sender. See FIGURE Run the ground wire as shown in FIGURE. 2. Run it under the stock Ford harness and up to the radiator support. Unbolt the stock Ford bolt that holds two stock ground terminals using a 10mm socket. Figure 1 Figure 2 18
19 5. Screw the adel clamp into the sheet metal near the windshield washer bottle using sheet metal screw PN: C11034* with a Phillip #2 drive loaded driver. The adel clamp needs to capture the brass fitting, NOT the hose. See FIGURES. 2, Reconnect the PCM harness and the 3 PCM connectors. See FIGURE. 3. Fuse box PCM connectors PCM Figure 3 Figure 4 Top radiator hose 19
20 VIII Boost Sender Wire Hookup Obtain the Following Tools: ½ wide electrical tape Order of Operations: 1. With the gauge pod harness routed around the front of the washer bottle neck, route the green boost wire as shown in FIGURES 1, Continue routing the green boost wire along side the PCM (FIGURE 3). Using electrical tape, tape the green boost wire to the stock Ford harness that runs up to the valve covers. (FIGURE 5) 3. Continue routing the green boost wire up the stock Ford harness. Unscrew the nut and washer that is on the Boost sender, and attach the ring terminal that is on the end of the green boost wire. Tighten the nut with the washer on the boost sender. Washer fluid bottle neck Washer fluid bottle neck Figure 1 Figure 2 20
21 4. Continue routing the green boost wire up the stock Ford harness until you reach the passenger s side front corner of the supercharger. There you will find a threaded plug that needs to be removed with an 11mm socket. 5. Apply Loctite thread sealant #30534 (with PTFE) to the boost sender s threads, then screw the boost sender into the hole where you removed the plug from (passenger front corner of supercharger). Tighten the boost sender with a 13 m wrench. 6. Unscrew the nut and washer that is on the boost sender, and attach the ring terminal that is on the end of the green boost wire. Tighten the nut with the washer on the boost sender, over the green wire ring terminal. (FIGURES 4,5) 7. Using electrical tape, tape the green boost wire to the stock Ford harness. (FIGURES 4, 5) Figure 3 Figure 4 Figure 5 21
22 IX Gauge Pod Hole Drilling Obtain the Following Tools: 90 degree drill 3/16 bit with drill stop L letter bit with drill stop 5/16 bit with drill stop 1 hole saw L 1in. L 5/16 in. 1 in. Figure 2 Order of Operations: 1. For hole A in FIGURE 1, measure 1 7/8 back from the trailing edge (the edge facing the rear of the car) of the dash. (FIGURE 2) From that line, measure 4 ½ straight across from where the tape measure hits the driver side fold line noted in FIGURE 1 hole A will be 4 ½ to the right of the driver side groove. (FIGURE 2) 2. The two holes on either side of hole A are 1 7/16 away horizontally (straight towards the doors) and 1/8 farther towards the rear of the car (1 ¾ from the trailing edge of the dashboard). (FIGURE 2) 3. The hole in front of hole A is 1 1/8 further forward than hole A. The hole that is farthest forward on the dashboard is 2 ¼ in front of hole A. 4. Using a 3/16 drill bit that has a drill bit stop set for only 1/4 depth, and drill all five pilot holes (FIGURE 2). 5. Using the 5/16 and L drill bits with stops set for ¼ depth, and the 1 hole saw, drill out holes to correct sizes as indicated in FIGURE 2. Don t drill to deep or you will damage the HVAC vents. Deburr all holes. Fold line 1 1/8 A Front of car 1 7/16 1 7/16 1 7/8 1 ¾ 4 ¼ Figure 1 22
23 X Gauge Pod Wiring Harness Installation (part 4) Part Number Description Qty B11158* Gauge Pod Assy 1 Obtain the Following Tools: 5/16 wrench Torque seal Order of Operations: 1. With the gauges and bracket already installed in the gauge pod housing, remove the three terminal nuts on each gauge. On the can housing, the nuts are labeled S, I, & G. 2. For the boost gauge & temperature gauge place the black wire over the terminal labeled G, place nut and tighten. Place the red wire on the terminal labeled I, place nut and tighten. 3. For the boost gauge place the green wire over the terminal labeled S, place nut and tighten. 4. For the light place the yellow / blue wire on one of the male spade terminals, and the black wire with female spade terminal on the last male spade terminal. 5. Place torque seal on the nuts and terminals. Boost gauge Temperature gauge Figure 1 23
24 XI Gauge Pod Attachment to Dashboard Part Number Description Qty C11401* Tape Vhb Thk 1" Wide 1 Obtain the following tools: 3M automotive adhesion promoter (3M# 06396) Order of Operatioms: 1. If there is not tape already on the bottom of the gauge pod, apply 3M automotive adhesion promoter over the crossed section as shown in FIGURE Remove the backing from a 1 x 1 piece of 3M double sided tape ( C11401*) and press firmly onto the area where you just applied the adhesion promoter. (FIGURE 1) 3. Line the gauge pod up with the dashboard in the orientation shown in FIGUREs 2 and 3, and apply 3M adhesion promoter to the area of the dash where the tape will go. 4. Remove the backing from the tape on the gauge pod, and line up the gauge pod clips with the small holes drilled into the dashboard. (FIGURE 4) 5. Press the gauge pod firmly into place so the clips go into the appropriate holes. 6. Replace the interior trim panel removed on page 7. clips Figure 1 Figure 2 Tape over crossed section clip Figure 3 Figure 4 Hole for clip 24
SALEEN SPEEDLAB S281SC REAR WING KIT
= SALEEN SPEEDLAB S281SC REAR WING KIT INSTALLATION MANUAL: 2005 to '09 Mustang P/N: 10-8002-C11998B Saleen Performance, Inc. 1225 East Maple Rd. Troy, MI 48083 (800)-888-8945 www.saleen.com 2 IF YOU ARE
More informationSALEEN SPEEDLAB S331SC GAUGE POD KIT
SALEEN SPEEDLAB S331SC GAUGE POD KIT INSTALLATION MANUAL: 2005-08 F150 P/N: 10-8001-C17139A Saleen Performance, Inc. 1225 East Maple Rd. Troy, MI 48083 800-888-8945 www.saleen.com 2 IF YOU ARE NOT EXPERIENCED
More informationSALEEN SPEEDLAB HOOD KIT
SALEEN SPEEDLAB HOOD KIT INSTALLATION MANUAL: 2005 to '09 Mustang P/N: 10-8002-C11870C Saleen Performance, Inc. 1225 East Maple Rd. Troy, MI 48083 (800)-888-8945 www.saleen.com IF YOU ARE NOT EXPERIENCED
More informationINSTALLATION MANUAL: MUSTANG DUAL FUEL PUMP KIT P/N: C14057B
INSTALLATION MANUAL: 05-09 MUSTANG DUAL FUEL PUMP KIT P/N: -8002-C157B Saleen Performance, Inc. 800-888-8945 www.saleen.com STOP IF YOU ARE NOT EXPERIENCED IN THE AREA OF AUTOMOTIVE MECHANICS, WE STRONGLY
More informationSALEEN SPEEDLAB ROCKER PANELS KIT
= SALEEN SPEEDLAB ROCKER PANELS KIT INSTALLATION MANUAL: 2005 to 2009 Mustang P/N: 10-8002-C12166C Saleen Performance, Inc. 1225 East Maple Rd. Troy, MI 48083 248-743-4800 www.saleen.com IF YOU ARE NOT
More informationWeistec M113K Supercharger System Installation Guide
Weistec M113K Supercharger System Installation Guide WARNING! DO NOT HAVE YOUR ECU REPROGRAMMED ANYWHERE BUT AT WEISTEC FOR THIS SUPERCHARGER. THE AMG 55 USES AN ELECTRONIC THROTTLE CONTROL (ETC), WHICH
More informationITEM QTY CHECK PART NUMBER DESCRIPTION
PART #90542A Boost Gauge Package, SLP, 2005-2013 Corvette PACKING LIST Before installation, use this check list to make sure all necessary parts have been included. ITEM QTY CHECK PART NUMBER DESCRIPTION
More informationDepress each tab as you pull the bezel off. The bezels are tight. L.H. shown.
2013-2014 Ford Mustang V6 & Boss 302 Lower Valance Fog Light Kit Parts List: Quantity: Tool List: Fog light & bulb with bracket 2 Flat head & Phillips screwdriver Black bezels 2 Ratchet & Socket set OR
More informationM GT 2005 up Mustang ENGINE START Push-Button INSTRUCTION SHEET
Please contact the Ford Racing Techline for the most current instruction information @ (800) FORD-788!!! PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION!!! OVERVIEW: The following
More informationITEM QTY CHECK PART NUMBER DESCRIPTION. NOTE: This package does not include any accessories for gauge installation
PART #90540A Gauge Pod Only Package, SLP, 2005-2013 Corvette PACKING LIST Before installation, use this check list to make sure all necessary parts have been included. ITEM QTY CHECK PART NUMBER DESCRIPTION
More informationThank you for purchasing the Craven Speed FlexPod Complete Gauge Pod Kit For R56, R58, R59, R60 with Refresh Engines (2011+)
Thank you for purchasing the Craven Speed FlexPod Complete Gauge Pod Kit For R56, R58, R59, R60 with Refresh Engines (2011+) Before You Start Please read instructions completely before installing. These
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 22903-22963 ODYSSEY Issue Date MAY 2002 PARTS LIST Subwoofer Kit: P/N 08A39-EP7-100 Subwoofer 2 Cushion tapes 8 Wire ties (1 not used)
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS FUEL SURGE TANK INSTALL KIT Honda S2000 Document# 19-0063 Support: info@radiumauto.com WARNING: DO NOT SMOKE WHILE WORKING ON FUEL SYSTEMS. KEEP SPARKS AND OPEN FLAMES AWAY FROM
More informationROUSH Active IO Exhaust. Installation Instructions P/N: (R LITE) Fastback GT Convertible GT V8
Installation Instructions P/N: 422128 (R1318-5231LITE) Fastback GT Convertible GT V8 39555 Schoolcraft Rd, Plymouth MI, 48170 800.59.ROUSH ROUSH Active IO Exhaust Installation Instructions P/N: 422128
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. SYSTEM 2005 ACCORD All 27511 (DX, LX) 2-AND 4-DOOR Issue Date AUG 2004 PARTS LIST Security System Attachment (LX): P/N 08E55-SDA-100A Unit
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AUTOMATIC AII 27160 2005 CR-V Issue Date ATTACHMENT KIT SEP 2004 PARTS LIST Automatic Day/Night Mirror Attachment Kit (sold separately)
More informationInstallation of Auto Meter Cobalt Boost/Vacuum Gauge:
Installation of Auto Meter Cobalt Boost/Vacuum Gauge: Fitment: All 79-14 models. This installation was completed on a 2004 Mustang GT, and should be identical for all 1999-2004 model Mustangs. Time needed:
More informationProcharger Stage II Intercooled Supercharger System (11-14 GT)
Procharger Stage II Intercooled Supercharger System (11-14 GT) Installation Time: Approximately one day. Installed on 2012 Mustang GT 5.0/Manual Required Tools 3/8 Socket Set (Standard and Metric) 1/2
More informationTurn Signal / Horn Kit PN 7101 by All years Polaris RZR 1000 and RZR 900, 900-4, 900 trail, 900S and 900XC STOP - THIS KIT IS DESIGNED
All years Polaris RZR 1000 and 1000-4 2015 RZR 900, 900-4, 900 trail, 900S and 900XC STOP - THIS KIT IS DESIGNED SPECIFICALLY FOR ALL YEAR AND MODEL POLARIS RZR 1000 AND 1000-4. ALSO THE 2015 POLARIS RZR
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. CD CHANGER ATTACHMENT KIT ODYSSEY AII 22030 Issue Date AUG 2000 PARTS LIST CD Changer Attachment Kit: P/N 08B12-S0X-100 Right side rail
More informationInstallation Instructions - ECS Tuning Vent Pod Vacuum/Boost Gauge Kit
Installation Instructions - ECS Tuning Vent Pod Vacuum/Boost Gauge Kit This tutorial is provided as a courtesy by ECS Tuning. Part Number for (2005-2008) Proper service and repair procedures are vital
More informationDODGE RAM 24V 5.9L CUMMINS
DODGE RAM 24V 5.9L CUMMINS DODGE RAM 24V 5.9L CUMMINS TABLE OF CONTENTS SECTION 1 Preparing the Installation 1 SECTION 2 Boost Gauge Installation 2 SECTION Pyrometer/EGT Gauge Installation 4 SECTION 4
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory P/N 08E10-TA0-100 Application 2008 ACCORD 2-AND 4-DOOR Publications No. AII 35358 Issue Date AUG 2007 PARTS LIST Ambient Light Kit 2 Ambient lights Fuse label Washer
More information1963 GEN IV SUREFIT VINTAGE AIR CONDITIONING INSTALLATION
by Randy Irwin 1963 GEN IV SUREFIT VINTAGE AIR CONDITIONING INSTALLATION Randy Irwin - Technical Writer Randy has been involved in the Chevy parts business for over 30 years. He is a wizard at creating,
More informationPlease read thoroughly before starting installation and check that kit contents are complete.
Rear Vision System Mirror Display 2013-Current Ram (Kit part number 1009-9518) Please read thoroughly before starting installation and check that kit contents are complete. Items Included in the Kit: Rear
More information3.4L V6 SUPERCHARGER 7 TH INJECTOR KIT
Part Number: 00602-17620-260 00602-17620-261 00602-17620-263 00602-17620-264 00602-17620-274 00602-17620-275 00602-17620-276 Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description
More informationInstallation Instructions for Lingenfelter GM 2500 Suburban & Yukon XL Auxiliary Fan System (with AC clutch controlled fan output)
Installation Instructions for Lingenfelter 2007-2013 GM 2500 Suburban & Yukon XL Auxiliary Fan System (with AC clutch controlled fan output) PN L300080607 Revision - 1.1 Lingenfelter Performance Engineering
More information2015+ HELLCAT 6.2L HEMI System vehicle specific plate system xx
These installation instructions will guide you through installing the Nitrous Outlet 2015+ Hellcat 6.2L Hemi Vehicle Specific Plate System on your vehicle. Before you get started, remember to never use
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 26031 2004 ODYSSEY Issue Date AUG 2003 NOTE: You cannot install the subwoofer in a vehicle equipped with both an under seat Navigation
More informationPART NUMBER: H630SSJ000. Kit Contents: A. Amplifier with Bracket (1) D. Badge (2) with push nuts (4)
Kit Contents: A. Amplifier with Bracket (1) D. Badge (2) with push nuts (4) E. Clip B. Harness (1) C. Cable tie (8) F. Mounting Hardware (2) G. Replacement Speaker (2) H. HVAC Duct extension (2) IMPORTANT:
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory BACKUP S Application 2012 ODYSSEY Publications No. AII 46724 Issue Date SEP 2011 PARTS LIST Backup Sensor Attachment Kit P/N 08V67-TK8-100A Right center sensor clip
More informationThank you for purchasing the Craven Speed FlexPod Complete Gauge Pod Kit
Thank you for purchasing the Craven Speed FlexPod Complete Gauge Pod Kit Before You Start Please read instructions completely before installing. These instructions contain the information required to install
More informationWeistec M177 WMI System
Weistec M177 WMI System Installation Guide 2015+ C63(S) Sedan 2016+ C63(S) Coupe This product is legal in California for racing vehicles only and should never be used upon a highway. This product is legal
More informationINSTALLATION INSTRUCTIONS
Rear Vision System Mirror Display 2004 onwards Ford F-150 and 2008 onwards Ford Super Duty (Kit part numbers 1008-9520 and 1008-9525) Kit Contents: RVS Interior (shorter) Harness RVS Chassis (longer) Harness
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory P/N 08E10-TA0-110A Application 2012 ACCORD 2- AND 4-DOOR Publications No. AII 46501 Issue Date AUG 2011 PARTS LIST Ambient Light Kit Fuse label 2 Ambient lights Washer
More information2015 Mustang Lightbar (All Models) CDC#
2015 Mustang Lightbar (All Models) CDC# 1511-7000-01 Components: 1 CDC Lightbar Note: READ instructions before starting installation!!! CDC Part# Driver side bracket 0511-6001-05 Passenger side bracket
More information3 October 2016 PN# V Dodge Twin Turbo Kit (I-00274) ½ D o d g e 2 4 v I S B
3 October 2016 PN#1045320 24V Dodge Twin Turbo Kit (I-00274) 1 DOWNLOAD ENHANCED INSTALL MANUALS AT dieselperformance.com BD Twin Turbo Kit 1998½- 2 0 0 2 D o d g e 2 4 v I S B Part# 1045320 PLEASE READ
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 26042-26353 XM INTERFACE ODYSSEY EXCEPT EX-L WITH NAVI/RES Issue Date FEB 2004 PARTS LIST 8 Wire ties XM Radio Attachment P/N 08B15-S0X-100
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 24664-25319 SYSTEM 2003 CR-V Issue Date MAY 2003 PARTS LIST Security System (sold separately) P/N 08E51-EP4-100 Security System Attachment
More informationINSTALLATION INSTRUCTIONS
Rear Vision System Tailgate Handle Camera Mirror Display 2004-2014 Ford F-150 and 2008-2015 Ford Super Duty (Kit part numbers 9002-9521) Kit Contents: Mirror Tailgate Handle with camera and harness Interior
More informationPush Start Ignition (05-10 All) Installation
Tools Required: Phillips head screwdriver Flat head screwdriver Ratchet 7mm Socket Torx T20 bit Wire strippers/cutters Hand file Needle nose pliers Installation Instructions: Push Start Ignition (05-10
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory S P/N 08E10-TP6-100 Application 2010 ACCORD CROSSTOUR Publications No. AII 41935 Issue Date NOV 2009 PARTS LIST TOOLS AND SUPPLIES REQUIRED Ambient Light Kit Ambient
More informationMUSTANG GT
MAXFLOW FUEL PUMP BOOSTER Installation Instructions 2011-2012 MUSTANG GT P/N: 5A102-029 ENGINEERING, INC. 1650 Pacific Avenue, Channel Islands, CA 93033-9901 Phone 805 247-0226 Fax: 805 247-0669 www.vortechsuperchargers.com
More informationGROUP SEVEN WINDSCREEN AND WIPERS. Assemblies included In this group: -
GROUP SEVEN st Edition WINDSCREEN AND WIPERS Assemblies included In this group: - 7. 7. 7.3 7. 7.5 K3605AB K360AA K3605AA K3608AA K3605AA K36008AA WINDSCREEN WASHER WIPER LINKAGE ASSEMBLY WINDSCREEN MOUNTING
More informationWeistec M157 WMI System
Weistec M157 WMI System Installation Guide 2012-2013 E63 2014+ E63 4matic(S) 2011-2013 CLS63 2014+ CLS63 4matic(S) 2015+ S63 AMG (Without ABC Suspension) This product is legal in California for racing
More informationInstallation Instructions - ECS Tuning Vent Pod Vacuum/Boost Gauge Kit
Installation Instructions - ECS Tuning Vent Pod Vacuum/Boost Gauge Kit This tutorial is provided as a courtesy by ECS Tuning. Part Number for Audi B6 A4 (2002-2004) Proper service and repair procedures
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application 2011 CR-V Publications No. AII 44647 Issue Date AUG 2010 PARTS LIST Trailer Hitch Kit P/N 08L92-SWA-101 Trailer Hitch Harness Kit P/N 08L91-SWA-100 Trailer
More informationINSTALLATION INSTRUCTIONS
Rear Vision System Tailgate Emblem Camera Mirror Display 2009-Current Ford F-150 and 2010-Current Super Duty (Kit part number 1008-9527) Kit Contents: Mirror Tailgate Emblem Mount with Camera Interior
More informationINSTALL MANUAL D o d g e 1 2 v 6 B T A PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION.
PN#1045310 12V Dodge Twin Turbo Kit (I-00273) 1 INSTALL MANUAL BD Twin Turbo Kit 1994-1 9 9 8 D o d g e 1 2 v 6 B T A Part# 1045310 PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION. * Picture as shown
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 23642 P/N 08L91-S9V-100 2003 PILOT Issue Date MAY 2002 PARTS LIST Trailer hitch harness 2 Short wire ties 2 Long wire ties Clip Bolt
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 23086 SYSTEM CR-V Issue Date NOV 2001 PARTS LIST Security System P/N 08E51-EP4-100 Security System Attachment P/N 08E55-S9A-100 Security
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. CD CHANGER ATTACHMENT KIT 2004 CR-V AII 26118 Issue Date SEP 2003 PARTS LIST CD Changer Attachment Kit (sold separately): P/N 08B26-S9A-100
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. CD CHANGER ATTACHMENT KIT 2005 CIVIC SI AII 27936 Issue Date AUG 2004 PARTS LIST CD Changer Attachment Kit (sold separately): P/N 08B26-S5T-100
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. S P/N 08V31-S0X-100 1999-2001 ODYSSEY AII 20677 Issue Date AUG 1999 PARTS LIST 2 Fog lights Switch Fuse label Right bracket Relay B, 4-pin
More informationAir Conditioner for M915 A0/A1 Truck
RD-2-4530-0 Air Conditioner for M915 A0/A1 Truck INSTALLATION INSTRUCTIONS Install refrigerant compressor per instructions provided with compressor mount kit. CAUTION: Edges of sheet metal can be sharp!
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 25876 2004 PILOT (LX only) Issue Date AUG 2003 The subwoofer cannot be installed on a vehicle equipped with a navigation unit. Subwoofer
More informationInstallation Instructions - ECS Tuning Vent Pod Vacuum/Boost Gauge Kit
Installation Instructions - ECS Tuning Vent Pod Vacuum/Boost Gauge Kit This tutorial is provided as a courtesy by ECS Tuning. Part Number (also available as steering wheel mounted kit ES2593248) for VW
More informationInstallation Instructions
Installation Instructions Jeep JK Unlimited (2007 Present) Mounting Bracket and Air Line System Kit for ARB On-Board Twin Air Compressor (CKMTA12) Made in the USA Kit Contents: 1 Bracket for ARB Compressor
More informationSCION xd INTERIOR LIGHTING UPGRADE Preparation
Preparation Part Number: PTS21-52085 Light Guide Kit Contents Item # Quantity Reqd. Description 1 1 Controller Board, 4 color programmed w/ Bracket 2 1 RGB, LED Engine wire harness 3 2 14mm Light Rod,
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory S Application 2011 PILOT Publications No. AII 43298 Issue Date MARCH 2010 PARTS LIST Back-up Sensor Attachment Kit P/N 08V67-SZA-100A Back-up sensor harness Fuse label
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AUTOMATIC PILOT AII 23597 Issue Date MAY 2002 PARTS LIST Automatic Day/Night Mirror Attachment Kit P/N 08V03-S9V-100A Day/night mirror Upper
More informationINSTALLATION INSTRUCTIONS
Rear Vision System Tailgate Emblem Camera Aftermarket Display 2009-Current Ford F-150 and 2010-Current Super Duty (Kit part number 1008-6509) Kit Contents: Tailgate Emblem Mount with Camera Chassis Harness
More informationRear Vision System Tailgate Emblem Camera Aftermarket Display 2009-Current Ford F-150 and 2010-Current Super Duty (Kit part number )
Rear Vision System Tailgate Emblem Camera Aftermarket Display 2009-Current Ford F-150 and 2010-Current Super Duty (Kit part number 1008-6509) Kit Contents: Tailgate Emblem Mount with Camera Chassis Harness
More informationPRODUCT SAFETY NOTICE
PRODUCT SAFETY NOTICE Congratulations. This vehicle has been equipped with a Firestone air suspension system. This suspension will enhance the vehicle s handling when loaded, however, the vehicle s performance
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. / All 33055 2007 PILOT (LX) Issue Date JULY 2006 Player Attachment Kit (sold separately) : P/N 08B06-S9V-100A Cassette Player (sold separately)
More informationHeater/Defroster Installation Instructions
1301 39 th Street NW, Suite 2 * Fargo, ND 58102 * Toll Free 866.764.0616 * Fax 701.446.0103 * www.gemcar.com Service Instructions Heater/Defroster Installation Instructions Models: All 2005 - Current Part
More informationFord Mustang GT-Style Fog Light Kit Parts List: Quantity: Tool List:
2013-2014 Ford Mustang GT-Style Fog Light Kit Parts List: Quantity: Tool List: Fog light (Left& Right) 2 Flat head & Phillips screwdriver Upper grille with surround 1 Ratchet & Socket set OR Lower grille
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. CIVIC All 30175-31616 2 AND 4-DOOR P/N 08E10-SNA-100 Issue Date DEC 2005 NOTE: The interior illumination lights cannot be installed on 2-door
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 24642 BODY SIDE CLADDING 2003 CR-V P/N 08P21-S9A-100 Issue Date OCT 2002 PARTS LIST Right rear bumper piece Right front fender piece
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory XM RADIO SYSTEM Application 2011 CIVIC 2-AND 4-DOOR (EX, EX-L) Publications No. AII 44350 Issue Date AUG 2010 PARTS LIST XM Radio Attachment (sold separately): P/N 08B15-SNA-100A
More informationSection II - Installation Procedures Part Number : Accessory Code IL1 Kit Contents. Color Applicability/Trim Level. Hardware Bag Contents
Document # 10.21.00 PIO/DIO 01/14/09 TOYOTA Rav-4 2009- INTERIOR InteriorLIGHT Light UPGRADE Upgrade Part Number : 00016-00065 Accessory Code IL1 Kit Contents Color Applicability/Trim Level Item # Quantity
More informationINSTALLATION INSTRUCTIONS Accessory Application Publications No. 2010 CIVIC All 42479 2- AND 4-DOOR P/N 08E10-SNA-110 Issue Date AUG 2009 NOTE: The interior illumination lights cannot be installed on 2-door
More informationLine Lock Package, Mustang GT/GT500, 2007 PACKING LIST
PART #M25002 Line Lock Package, Mustang GT/GT500, 2007 PACKING LIST Before installation, use this check list to make sure all necessary parts have been included. ITEM QTY CHECK PART NUMBER DESCRIPTION
More informationfor Audi B7/A4 ( ) Part Number ES8017 Installation Instructions - ECS Tuning Vent Pod Vacuum/Boost Gauge Kit
Installation Instructions - ECS Tuning Vent Pod Vacuum/Boost Gauge Kit This tutorial is provided as a courtesy by ECS Tuning. Part Number for (2005-2008) Proper service and repair procedures are vital
More informationTOYOTA YARIS HATCHBACK INTERIOR LIGHT UPGRADE Preparation
Preparation Part Number PTS21-52062-08 NOTE: Part number of this accessory may not be the same as the part number show Kit Contents Item # Quantity Reqd. Description 1 1 12 Light Guide 2 1 7 Light Guide
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. All 12035 SYSTEM 2012 RIDGELINE Issue Date NOV 2011 PARTS LIST Security System Attachment Kit: P/N 08E55-SJC-101 Flange bolt Unit bracket
More informationINSTALLATION & OWNER S MANUAL
INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS JOHN DEERE 3000 SERIES (4200/4300/4400) (4210/4310/4410) & (3120/3320/3520/3720) HARD SIDED CAB ENCLOSURE (p/n 1JD3520AS) SOFT SIDED CAB ENCLOSURE
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. SYSTEM ACCORD 2-DOOR (LX/EX L4, LX V6) AII 25749 Issue Date FEB 2004 PARTS LIST Double-sided adhesive tape XM Radio Attachment Kit : P/N
More informationPERFECT FIT SERIES IN-DASH HEAT/ COOL/ DEFROST MUSTANG
specializing in AIR CONDITIONING, PARTS AND SYSTEMS for your classic vehicle PERFECT FIT SERIES IN-DASH HEAT/ COOL/ DEFROST 1969-70 MUSTANG CONTROL & OPERATING INSTRUCTIONS The controls on your new Perfect
More informationPart Number: TTU-BGB14-DRL TTU-BGP14-DRL
11/15/16 TOYOTA TUNDRA 2014-17 Billet Grille w/led DRL Part Number: TTU-BGB14-DRL TTU-BGP14-DRL Kit Contents Item # Quantity Reqd. Description 1 2 LED DRL 2 1 Driver Box 3 1 Switch 4 1 User Card 5 2 Hardware
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. CHANGER ATTACHMENT (TRUNK MOUNT) 2005 CIVIC 4-DOOR AII 27890 Issue Date AUG 2004 PARTS LIST Changer Attachment (sold separately) P/N 08B26-S5D-100
More informationWATTS LINK REAR SUSPENSION KIT
WATTS LINK REAR SUSPENSION KIT INSTALLATION MANUAL: Saleen S-Series / H-Series / Mustang GT 05-09 Model Years P/N: -8002-C6859B Saleen Performance Inc. -800-888-8945 www.saleen.com STOP IF YOU ARE NOT
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. P/N 08E49-S2A-100 2004 S2000 AII 26325 Issue Date OCT 2003 PARTS LIST Hood switch harness TOOLS AND SUPPLIES REQUIRED #2 Phillips screwdriver
More informationROUSH Active Exhaust. Installation Instructions P/N: (R AVC) Fastback GT V8 - Convertible GT V8
Installation Instructions P/N: 422100 (R1318-5231AVC) Fastback GT V8 - Convertible GT V8 39555 Schoolcraft Rd, Plymouth MI, 48170 800.59.ROUSH ROUSH Active Exhaust Installation Instructions P/N: 422100
More informationContents. TCS/ Driver Mod Installation Manual
Contents Introduction... 1 TCS Packing List... 3 Tools Needed for Installation... 4 How to Properly Solder... 5 Soldering Standard Butt Connection... 5 Soldering T Connection... 6 How to Properly Crimp...
More informationINSTALLATION INSTRUCTIONS
Rear Vision System Liftgate Emblem Camera Mirror Display 2009-2012 Ford Flex (Kit part number 1008-9527) Kit Contents: Mirror Liftgate Emblem Mount with Camera Interior (shorter) Harness Chassis (longer)
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. XM RADIO SYSTEM (EXCEPT LX) 2006 ODYSSEY All 30392 Issue Date AUG 2005 PARTS LIST XM Radio Attachment (sold separately): P/N 08B15-SHJ-100
More informationadvanced FLOW engineering Instruction Manual P/N: / / Make: Toyota Model: Tacoma Year: Engine: V6-4.
advanced FLOW engineering Instruction Manual P/N: 51-76012 / 54-76012 / 75-76012 Make: Toyota Model: Tacoma Year: 2012-2015 Engine: V6-4.0L Please read the entire instruction manual before proceeding.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. S CIVIC 2 AND 4-DOOR (EX, LX) AII 24188 Issue Date AUG 2002 NOTE: Fog Lights cannot be installed if the vehicle is equipped with an optional
More informationINSTALLATION INSTRUCTIONS
9002-6513 Rear Vision System W/ Zoom Aftermarket and Factory 8.4 Touch Screen Display (Factory Display requires Chrysler/Dodge dealer to activate) 2009 2012 RAM (Part B) 2013 Current RAM (Part A) NOTE:
More informationPRELIMINARY INSTALLATION INSTRUCTIONS. Remote Engine Starter Attachment Kit P/N 08E92-SNA-100B
INSTALLATION INSTRUCTIONS Accessory Application Publications No. REMOTE ENGINE STARTER SYSTEM 2008 CIVIC 2-DOOR AII 38215 Issue Date OCT 2007 PARTS LIST Remote Engine Starter Unit Kit P/N 08E91-E22-100B
More informationINSTALLATION INSTRUCTIONS Accessory ACCESSORY HANDSFREELINK Application 2010 CR-V Publications No. AII 42587 Issue Date AUG 2009 PARTS LIST HFL Attachment Kit P/N 08E02-SWA-130 (Ivory) P/N 08E02-SWA-170
More informationCLASSIC UPDATE WIRING KIT
by Randy Irwin 1955-57 CLASSIC UPDATE WIRING KIT Randy Irwin - Technical Writer Randy has been involved in the Chevy parts business for over 25 years. He is a wizard at creating, making and modifying custom
More informationHush-O-Matic MRS Control Package
Hush-O-Matic MRS Control Package 06-49192 Congratulations on your purchase! The Hush-O-Matic MRS Control package allows you to choose a few different modes including always quiet and always loud. Controlling
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory REMOTE CONTROL ENGINE STARTER Application 2010 CR-V Publications No. AII 42612-42916 Issue Date OCT 2009 PARTS LIST Remote Engine Starter Unit Kit P/N 08E91-E22-101B
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. SYSTEM S2000 AII 26324 Issue Date OCT 2004 PARTS LIST Headrest Speaker System P/N 08A54-S2A-100 3 Small wire ties 2 Headrest speakers 9
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory ACCESSORY HANDSFREELINK Application 2010 ACCORD 2 AND 4-DOOR Publications No. AII 42231 Issue Date AUG 2009 PARTS LIST HFL retainer HFL Attachment Kit P/N 08E02-TA0-100
More informationINSTALLATION INSTRUCTIONS
Rear Vision System Mirror Display Dodge Ram Kit Contents: Instruction Sheets Template Chassis Harness Endgate Handle with Camera Wire Ties (Qty: 17) Bottle of ZTech Plug for Non-Locking Endgates (Optional)
More informationTOYOTA RAV4/HV INTERIOR LIGHT KIT Preparation
Preparation Part Number: PT413-42130 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 3 Hardware Bag Contents Item # Quantity Reqd. Description 1 20 Cable Tie 2 2 Scotchlok 3 2 Foam Pad
More informationINSTALLATION INSTRUCTIONS FUEL RAIL
INSTALLATION INSTRUCTIONS FUEL RAIL MITSUBISHI EVO X Document# 19-0067 Support: info@radiumauto.com WARNING: DON'T SMOKE OR WORK WITH OPEN SPARKS WHILE WORKING ON THE FUEL SYSTEM PREPARING THE VEHICLE:
More information