1.2 Switched socket outlets with interlock

Transcription

1 . Switched socket outlets with interlock. OMNIA Series OMNIAPLUS Series ADVANCE Series ADVANCE System ADVANCE-GRP System ADVANCE-GRP Series 8 87

2 Switched socket outlets with interlock. IP IP/IP7 > V < V > V < V OMNIA Series ADVANCE Series OMNIA Series ADVANCE Series OMNIA Series ADVANCE Series ADVANCE GRP Series OMNIA Series ADVANCE Series ADVANCE GRP Series Flush mounting With fuse holder page 9 page 9 Without fuse holder Without base With fuse holder page 9 page 9 page 9 page page 9 page 0 Without fuse holder page With fuse holder page 9 page 0 page 95 page 05 page 8 page Surface mounting Without fuse holder page 9 page 0 page 97 page 8 page 95 page 0 page 8 page 97 page With DIN RAIL ( modules) page 0 page 8 page 07 page

3 OMNIAPLUS System Interlocked socket for domestic use. FLUSH MOUNTING - IP5 OMNIAPLUS Series ACCESSORIES Standard WITHOUT PROTECTION Italian P7/ A - P+E / i Italian P0 A - P+E / i Pluristandard A - P+E / French A - P+E / German Unshuttered A - P+E / German Shuttered A - P+E / British A - P+E / New Zealand 0A - P+E / Swiss 0A - P+E / South African A - P+E / Indian /A - P+E / FUSE.x MCB RCBO Surface mounting box IP7 PG Cable Inlet i METRICA Cable Inlet 57.M00 Flush mounting box IP55 i Flame complete with gasket i from page 7 Flange x5 (*) 0A, C0 OMNIAPLUS Series DOMOPLUS Series Automatic spring closure Lockable door knob with blocking in position 0 and Application examples OMNIA Series Cover in darkened polycarbonate in order to see inside Version without protection, with fuse protection, MCB, RCBO (insert EVOLUTION Series) Maintains the IP5 degree of protection with the plug inserted With P+N blocking switch Stainless steel screws, unlosable MBOX Series OMNIA Series ADVANCE Series DOMINO Series ITALIAN STANDARD P7/-A Shuttered socket CEI - ITALIAN STANDARD P0-A Shuttered socket CEI - PLURISTANDARD A Shuttered socket FRENCH STANDARD A Shuttered socket GERMAN STANDARD A BRITISH STANDARD SOCKET A Shuttered socket - NEW ZEALAND 0A Unshuttered socket AS/N5 SWISS STANDARD 0A Unshuttered socket SEV 0:998 SOUTH AFRICAN A Shuttered socket SANS : (00) INDIAN STANDARD /A Shuttered socket IS 9:

4 switched socket outlets with interlock >V. FLUSH MOUNTING OMNIA Series (Δ) (Δ) OMNIA Series 0. (Δ) Poles Hz. Volt Colour h. IP - WITHOUT FUSE HOLDER IP - WITH FUSE HOLDER IP/IP7 - WITHOUT FUSE HOLDER IP/IP7 - WITH FUSE HOLDER A A A A A / / / P+E / /0 trasf. >00-0 () > c.c. () >- c.c. () > / / / P+E / /0 () () > >00-0 () > / / / P+N+E / /0 () >00-0 () > Rated voltage >V - Approvals: from page 5 - Switches as spare parts: page 88 - Supplied with stainless steel fixing screws. () The maximum amount of current available, taking into account the maximum overheating temperature allowed by the relevant standards, must be downgraded with respect to the nominal current by 5% for products with frequencies ranging above 00 Hz; contact Scame Technical Service for further information. () When using DC we recommend that you make sure of implementing the protection scheme that is most suitable for the system involved; contact Scame Technical Service for further information. () Pay special attention when selecting the appropriate fuse with respect to the tension of the installation. From page 98 (Δ) Products must be installed together with their required components (Ex. wall box 57.M008). It is downgraded to IP55 when fitted to a sufficiently rigid board. 9 9

5 switched socket outlets with interlock >V. SURFACE MOUNTING 0. ( ) OMNIA Series. 5. ( ) OMNIA Series ( ). Poles Hz. Volt Colour h. IP - WITHOUT FUSE HOLDER A IP - WITH FUSE HOLDER A ( ) ( ) A IP/IP7 - WITHOUT FUSE HOLDER A A ( ) IP/IP7 - WITH FUSE HOLDER ( ) / M M70.70.M70 / M M8.8.M8 / P+E / /0 trasf. >00-0 () > c.c. () >- c.c. () > M M78 5.M8 5.M8.78.M / M M7.7.M7 / M M7.7.M7 / M M8.8.M M85.85 P+E / M8.8 /0 () () > M >00-0 () > / M M79.79.M79 / M M75.75.M75 / M M87.87.M87 P+N+E / /0 () M87 5.M >00-0 () > M Rated voltage >V - Approvals: from page 5 - Switches as spare parts: page 88 - Supplied with stainless steel fixing screws. () The maximum amount of current available, taking into account the maximum overheating temperature allowed by the relevant standards, must be downgraded with respect to the nominal current by 5% for products with frequencies ranging above 00 Hz; contact Scame Technical Service for further information. () When using DC we recommend that you make sure of implementing the protection scheme that is most suitable for the system involved; contact Scame Technical Service for further information. ( ) The OMNIA Series surface mouting are also avilable in a metric cable inlet. For ordering add M after the first three digits (ex. 0.M70). ( ) Articoli disponibili solo con entrata cavi metrica e involucro rialzato. Note: in ADVANCE System, use version with METRIC cable inlet. From page 98 ADVANCE System From page

6 switched socket outlets with interlock <V. FLUSH MOUNTING OMNIA Series SURFACE MOUNTING ( ) Rated Rated Socket Type Colour h voltage IP IP/IP7 Socket Type Colour h voltage IP IP/IP7 With transformer P-A Normal - 0-5V~ (*)() - 0-5V~ P-A Normal Without 0-V~ transformer () - 0-5V~ P- Normal 0-V~ OMNIA Series - 0-5V~ P-A Normal Without 0-V~ transformer () - 0-5V~ P- Normal 0-V~ ( ) Rated operating voltage <V - Approvals: from page 5 - When the plug is inserted a micro-switch turns on that closes the circuits () SELV transformer g 0/V~ 0VA ( continuous duty). () The versions without transformer are particularly suitable for installations with centralised extra-low voltage transformer. ( ) The OMNIA Series surface mounting are also available in a metric cable inlet. Add M after the first three digits (ex. 0.M0). (*) Unsuitable for and 57.M00 boxes. ADVANCE System, DOMINO IP and MBOX enclosures. Note: in ADVANCE System, use version with metric cable inlet. From page 98 ADVANCE System From page

7 Modular system. FLUSH MOUNTING BOX Flush mounting box 0x8x7 i Flush mounting box for plasterboard walls Suited for being walled up in buried systems. - Complete with coupling insert. FRAME Dimensions Dimensions Flame complete with gasket 7xx9 IP55 (*) i Coupling insert (*) When assembled together with the relevant component. - For the installation of flush mounting boxes (product ). EQUIPMENT ENCLOSURE SURFACE MOUNTING SYSTEM - IP7(*) box kit Consumer unit system Dimensions DIN Modules DIN OMNIA x75x89 A - METRIC 57.M008 0x8x7-0W ( ) Cable inlet (*) When assembled together with the relevant component. ( ) When joined with consumer unit (product page 00 ). calculated conforming to CEI -9 italian standards. - Except fuse versions. - Not suitable for items 00. and 05.. SURFACE MOUNTING SYSTEM - IP(*) Dimensions PG i METRIC 57.M00 Dissipation x7x W i 57.0 xx W i 57.0 DIN 87x08x W i Blind Consumer unit DIN with terminal block opening 57.0 Enclosure for OMNIA Series socket outlets / (*) They can be fitted into the MBOX5 enclosures. (*) Hole Ø 0.5 mm on the upper side. Blank plate system DIN Modules Dimensions Dissipation - x7x - i xx - i x08x - i 57.0 (*) When assembled together with relevant component. ( ) calculated conforming to CEI -9 italian standards

8 Modular system. CONSUMER UNIT ASSEMBLY KIT - IP55(*) Dimensions BLANK PLATE - IP7(*) (*) When assembled together with the relevant component. ( ) When joined with surface mounting box (product 57.00). calculated in conformity to the CEI -9 standards. - DIN modules and supports included. - Installation in the flush mounting box through the frame item Complete with locking knob, triangular locking key and stainless steel fixing screws. - The consumer unit can also be installed in the IP DOMINO Series surface mounting anclosures. DIN modules x5x5 0W ( ) i PROTECTION COVER - IP0 Dimensions cover kit x98x For panel mounting of OMNIA Series interlocked switch sockets outlets without fuse carrier. - Top and bottom cable entries. - Supplied with fixing screws. COVER WITH INSERT FOR MODULAR DOMESTIC ACCESSORIES ONLY - IP55 Flange Flange x5mm Flange x5mm Dimensions Pre-holing x5x5 No i 5.00 x5x5 A (70x87mm) i 5.05 Enclosure for modules: Living International, Luna, Light and Light Tech x5 5.0( ) Enclosure for EVOLUTION Series modules ( ) This module container is realized by authorization of the Bticino spa company and is suitable to house the Living International, Luna, x5 5.0 Light and Light Tech modules which are registered trademarks owned by Bticino. Flange x5mm x5x5 (8x0mm) i 5.0 (*) When assembled together with the relevant component. - Closes the cut-outs foreseen for OMNIA Series flush mounting sockets with interlock. - Supplied with gasket for IP7 and stainless steel screws. Examples of installation - flange x5 MBOX Series EVOLUTION Series insert mounted on DIN rail support OMNIA System DOMINO Series 00 DIN rail support module art modules art

9 ADVANCE System switched socket outlets with interlock >V. SURFACE MOUNTING - IP ADVANCE Series Poles Hz. Volt Colour h. COMPACT WITHOUT FUSE HOLDER A M5 / M5 / COMPACT WITH FUSE HOLDER A M5 / M5 / LARGE WITH RAIL DIN ( MODULES) A M5 / M5 / / / / P+E / /0 trasf. >00-0 () > c.c. () >- c.c. () > 8 / / / P+E / /0 () () > >00-0 () > / / / P+N+E / /0 () >00-0 () > Rated voltage >V - Approvals: from page 5 - Switches as spare parts: page 88 - Supplied with stainless steel fixing screws. () The maximum amount of current available, taking into account the maximum overheating temperature allowed by the relevant standards, must be downgraded with respect to the nominal current by 5% for products with frequencies ranging 0 above 00 Hz; contact Scame Technical Service for further information. () When using DC we recommend that you make sure of implementing the protection scheme that is most suitable for the system involved; contact Scame Technical Service for further information. () Pay special attention when selecting the appropriate fuse with respect to the tension of the installation. ADVANCE System From page 0 0

10 ADVANCE System switched socket outlets with interlock >V. SURFACE MOUNTING - IP/IP ADVANCE Series Poles Hz. Volt Colour h. A M5 / COMPACT WITHOUT FUSE HOLDER M5 / LARGE WITHOUT FUSE HOLDER A M0 / A M5 / COMPACT WITH FUSE HOLDER M5 / LARGE WITH FUSE HOLDER A M0 / A M5 / LARGE WITH RAIL DIN ( MODULES) M5 / A M0 / / / / P+E / /0 trasf. >00-0 () > c.c. () >- c.c. () > 8 / (*) (*) / / (*) (*) P+E / /0 () () > >00-0 () > / / / (*) (*) P+N+E / /0 () >00-0 () > (*) 00V only Rated voltage >V - Approvals: from page 5 - Switches as spare parts: page 88 - Supplied with stainless steel fixing screws. () The maximum amount of current available, taking into account the maximum overheating temperature allowed by the relevant standards, must be downgraded with respect to the nominal current by 5% for products with frequencies ranging 0 above 00 Hz; contact Scame Technical Service for further information. () When using DC we recommend that you make sure of implementing the protection scheme that is most suitable for the system involved; contact Scame Technical Service for further information. () Pay special attention when selecting the appropriate fuse with respect to the tension of the installation. ADVANCE System From page 0 05

11 ADVANCE System switched socket outlets with interlock >V. SURFACE MOUNTING - IP/IP7 - HD VERSION ADVANCE-HD Series Poles Hz. Volt Colour h. HD COMPACT - WITH FUSE HOLDER A M5 / M5 / HD LARGE - WITH FUSE HOLDER A M0 / A M5 / HD LARGE - WITH RAIL DIN ( MODULES) M5 / A M0 / / / / P+E / /0 trasf. >00-0 () > c.c. () >- c.c. () > 8 / (*) (*) / / (*) (*) P+E / /0 () () > >00-0 () > / / / (*) (*) P+N+E / /0 () >00-0 () > (*) 00V only Rated voltage >V - Approvals: from page 5 - Switches as spare parts: page 88 - Supplied with stainless steel fixing screws. () The maximum amount of current available, taking into account the maximum overheating temperature allowed by the relevant standards, must be downgraded with respect to the nominal current by 5% for products with frequencies ranging 0 above 00 Hz; contact Scame Technical Service for further information. () When using DC we recommend that you make sure of implementing the protection scheme that is most suitable for the system involved; contact Scame Technical Service for further information. () Pay special attention when selecting the appropriate fuse with respect to the tension of the installation. ADVANCE System From page 0 07

12 ADVANCE System switched socket outlets with interlock <V. SURFACE MOUNTING - IP AND IP/IP7 Rated Socket Type Colour h voltage IP - COMPACT IP - LARGE IP/IP7 - COMPACT IP/IP7 - LARGE With Normal - V~ /0 transformer () P-A Heavy duty - V~ /0-0-5V~ /0 Normal 0-V~ /0 P-A - 0-5V~ /0 With RAIL Heavy duty 0-V~ /0 DIN ( modules) - 0-5V~ /0 Normal 0-V~ /0 P V~ /0 Heavy duty 0-V~ / /S 5./S 55.0/S 55./S 5.0/S 5./S 55./S 55./S 5./S 5./S ADVANCE Series 55.5/S 5.5/S A 0V Primary circuit Transformer A V Secondary circuit Protections for the version with transformer, large type. Fuses included Rated voltage >V - Approvals: from page 5 - When the plug is inserted a micro-switch turns on that closes the circuits. - Cable gland M5. () SELV transformer g0/v~ VA (continuous duty). ADVANCE System From page

13 ADVANCE System Modular system - IP. MODULE 0 (COMPACT) - STANDARD VERSION Modular bases Complete with inserts for joining several bases ( ) ADVANCE System A- FLANGE 70X87 DIN 0 DIN One-module with cut out - i 57.0 Enclosures IP One-module plain lid - Two-modules plain lid - One-module with window 8W Two-modules with window W - Modularity: ADVANCE Series compact (from page 0). MODULE 0 (COMPACT) - HEAVY DUTY VERSION i 57.0 i 57.0 i 57.0 i ADVANCE System ( ) A- DIN 0 DIN Modular bases Complete with inserts for joining several bases Enclosures IP Combination One-module with cut out - - One-module plain lid - Two-modules plain lid - One-module with window 8W Two-modules with window W - Modularity: ADVANCE-HD Series compact (from page 0). i i Note: The enclosure is supplied with screws for fastening the lid and mounting to the boxes; the kit also includes, metric coupler, seals and nuts: in order to carry out precise performance for metric shunt boxes, we recommend the use of stepped milling cutter. i i ( ) calculated according to CEI -9 Italian standard. The Heavy Duty products are suitable to heavy working conditions and are also resistant to highly salty environments. COMPACT CODE JUNCTION BOXES WITH ADVANCE COMPACT WITH ADVANCE LARGE DIFFERENT COMBINATIONS WITH ADVANCE AND OMNIA SOCKET OUTLETS 0

14 ADVANCE System Modular system - IP. MODULE (LARGE) - STANDARD VERSION Modular bases Complete with inserts for joining several bases ( ) ADVANCE System A--A FLANGE 70X87 DIN DIN One-module with cut out - i 57. Enclosures IP One-module plain lid - Two-modules plain lid - One-module with window 9W Two-modules with window 7W - Modularity: ADVANCE Series compact and large (from page 0), OMNIA Series (from page 9). MODULE (LARGE) - HEAVY DUTY VERSION i 57. i 57. i 57. i 57.5 ADVANCE System ( ) A--A DIN DIN Modular bases Complete with inserts for joining several bases Enclosures IP One-module with cut out - - One-module plain lid - Two-modules plain lid - One-module with window 9W Two-modules with window 7W - Modularity: ADVANCE-HD Series compact and large (from page 0). Combination i 578. i 578. Note: The enclosure is supplied with screws for fastening the lid and mounting to the boxes; the kit also includes, metric coupler, seals and nuts: in order to carry out precise performance for metric shunt boxes, we recommend the use of stepped milling cutter. i 578. i ( ) calculated according to CEI -9 Italian standard. The Heavy Duty products are suitable to heavy working conditions and are also resistant to highly salty environments. LARGE CODE 57.0 JUNCTION BOXES WITH ADVANCE COMPACT WITH ADVANCE LARGE DIFFERENT COMBINATIONS WITH ADVANCE AND OMNIA SOCKET OUTLETS

15 ADVANCE-GRP System Switched interlocked socket outlets >V. WITHOUT BASE - IP/IP7 - WITHOUT FUSE HOLDER ADVANCE-GRP Series A A A I-DEVICE A Poles Hz. Volt Colour h. / / / P+E / /0 trasf. >00-0 () > c.c. () >- c.c. () > / / / P+E / /0 () () > >00-0 () > / / / P+N+E / /0 () >00-0 () > Rated voltage >V - Approvals: from page 5 - Switches as spare parts: page 88 - Supplied with stainless steel fixing screws. () The maximum amount of current available, taking into account the maximum overheating temperature allowed by the relevant standards, must be downgraded with respect to the nominal current by 5% for products with frequencies ranging above 00 Hz; contact Scame Technical Service for further information. () When using DC we recommend that you make sure of implementing the protection scheme that is most suitable for the system involved; contact Scame Technical Service for further information. () Pay special attention when selecting the appropriate fuse with respect to the tension of the installation. ADVANCE-GRP System From page 5

16 ADVANCE-GRP System Switched interlocked socket outlets >V. WITHOUT BASE - IP/IP7 - WITH FUSE HOLDER ADVANCE-GRP Series A A A I-DEVICE A Poles Hz. Volt Colour h. / F 0.70-F 0.70-F 0.70-F 0.70-F 0.70-F / F 0.8-F 0.8-F 0.8-F 0.8-F 0.8-F / P+E / /0 trasf. >00-0 () > c.c. () >- c.c. () > F 0.8-F 0.8-F 0.8-F 0.78-F 0.8-F 0.8-F 0.8-F 0.78-F 0.8-F 0.8-F 0.8-F 0.78-F 0.8-F 0.8-F 0.78-F 0.8-F 0.8-F 0.78-F 0.8-F 0.8-F / F 0.7-F 0.7-F 0.7-F 0.7-F 0.7-F / F 0.7-F 0.7-F 0.7-F 0.7-F 0.7-F / F 0.8-F 0.8-F 0.8-F 0.8-F 0.8-F F 0.85-F 0.85-F 0.85-F 0.85-F 0.85-F P+E / F 0.8-F 0.8-F 0.8-F 0.8-F 0.8-F /0 () () > F 0.8-F 0.8-F 0.87-F 0.8-F 0.8-F 0.87-F 0.8-F 0.8-F 0.87-F 0.8-F 0.87-F 0.8-F 0.87-F 0.8-F P+N+E >00-0 () > / / /0-5 / /0 () >00-0 () > 0.8-F 0.79-F 0.75-F 0.87-F 0.87-F F F 0.87-F 0.87-F 0.8-F 0.79-F 0.75-F 0.87-F 0.87-F F F 0.87-F 0.87-F 0.8-F 0.79-F 0.75-F 0.87-F 0.87-F F F 0.87-F 0.87-F 0.79-F 0.75-F 0.87-F 0.87-F F F 0.87-F 0.79-F 0.75-F 0.87-F 0.87-F F F 0.87-F 0.79-F 0.75-F 0.87-F 0.87-F F F 0.87-F An electronic device controls (Intelligence Device) the status of the interlocked socket, monitoring the electrical functionality: - operation of the signalling and control card is guaranteed even when the load is not connected; INDICATOR LIGHT ON - indicates that the fuses are not open and all the phases are present; - indicates that the socket outlet is powered correctly; INDICATOR LIGHT FLASHING - signals the interruption of one or more fuses; - signals the absence of a phase*; INDICATOR LIGHT OFF - indicates that the socket outlet is not powered. * for single-phase products in the event of phase/neutral loss led signaling appears off. Rated voltage >V - Approvals: from page 5 - Switches as spare parts: page 88 - Supplied with stainless steel fixing screws. () The maximum amount of current available, taking into account the maximum overheating temperature allowed by the relevant standards, must be downgraded with respect to the nominal current by 5% for products with frequencies ranging above 00 Hz; contact Scame Technical Service for further information. () When using DC we recommend that you make sure of implementing the protection scheme that is most suitable for the system involved; contact Scame Technical Service for further information. () Pay special attention when selecting the appropriate fuse with respect to the tension of the installation. System ADVANCE-GRP From page 7

17 ADVANCE-GRP System Switched interlocked socket outlets >V. SURFACE MOUNTING I-DEVICE - IP - WITHOUT FUSE HOLDER ADVANCE-GRP Series ACCESSORIES ADVANCE-GRP Series Poles Hz. Volt Colour h. P+E /0 00- P+E / A A.8.8 5A Microswitch kit 00V 0A (microswitch + terminal block) - Max kit. - For products with mechanical interlock. Contacts Terminals NO+NC x mm P+N+E / SURFACE MOUNTING I-DEVICE - IP - WITH FUSE HOLDER ADVANCE-GRP Series A A 5A 5A 5A 5A 5A Poles Hz. Volt Colour h. P+E / F.8-F.8-F.58-F.58-FS.58-M.58-RM.58-T P+E / F.8-F.8-F.58-F.58-FS.58-M.58-RM.58-T P+N+E / F.87-F.87-F.587-F.587-FS.587-M.587-RM.587-T Rated voltage >V - Approvals: from page 5 ADVANCE-GRP System From page With switch-disconnector With switch-disconnector and fuse Fuses not included With fuse and switchdisconnector Fuses not included With molded case circuit breaker with thermal magnetic trip unit With molded case circuit breaker with thermal magnetic and residual current release trip units Contactor operated by microswitch Microswitch already provided 8 9

18 ADVANCE-GRP System Switched interlocked socket outlets <V. WITHOUT BASE - IP/IP7 ADVANCE-GRP Series SURFACE MOUNTING - IP - WITH FUSE HOLDER ADVANCE-GRP Series With transformer (*) Without transformer Plug Colour Rated voltage P-A 0-5V~ P-A P- 0-5V~ 0-5V~ 0-V~ 0-V~ With transformer (*) Plug Colour Rated voltage P-A 0-5V~.-F Wiring operations Wiring capacity of the terminals (mm ) Rated current (A) A Min Socket outlets Max 0 Socket without transformer wiring diagram P A P Note: external transformer Rated voltage >V - Approvals: from page 5 - For the choice of bottoms, refer to thea- module. (*) SELV trasformer g 0/V~ VA. ADVANCE-GRP System From page 0

19 ADVANCE-GRP System modular system. BASES AND CONSUMER UNIT - IP/IP7 ADVANCE-GRP System GALVANIZED STEEL SUPPORTS ADVANCE-GRP System Base for one socket Module DIN Module HxB (W) A- A- - 0x A - 80x A HxB xa- 555x xa- 555x Base for one socket with derivation box Module DIN Module HxB (W) A- - 0x A - 580x HxB xa- + xa 85x xa- + xa 85x xa- + xa 85x Composition examples Module DIN Module HxB (W) Base for one socket with consumer unit A- 0x A 8 580x M bottom jointing Kit (page ) Module DIN Module HxB (W) Base for two sockets with derivation box A- - 0x A Base for two sockets with consumer unit Module DIN Module HxB (W) A- - 0x A in conformity with CEI -8 CEI IP/IP7 when coupled with the respective component.

20 ADVANCE-GRP System modular system. ACCESSORIES ADVANCE-GRP System AS panels Microswitch Kit for Advance GRP A--A for plug-inserted control Contact Max kit for A- sockets; Max kit for A sockets. NO/NC / Junction box Kit IP/IP7 (A--A) M0 (*) / Junction box Kit IP/IP7 (A) M (*) / M bottom jointing Kit M / (*) Includes cable gland and gasket. - IP/IP7 when coupled with the respective component. AUXILIARY CONTACTS ADVANCE-GRP System NC Contact NA Contact NC= normally closed. For switches A PL0000 A PL0000 A PL0000 A PL0000 NA= normally open. Example of Mega Panel available in customized configuration. M bottom jointing Kit. Auxiliary contact assembled. 5