PAK. PakMaster XL PLUS-CE Series. PLUS The New SureLok Torch! Air Plasma Cutting Systems. Over 40 Years of Plasma Cutting Innovation

Size: px
Start display at page:

Download "PAK. PakMaster XL PLUS-CE Series. PLUS The New SureLok Torch! Air Plasma Cutting Systems. Over 40 Years of Plasma Cutting Innovation"

Transcription

1 MASTERXL PLUS- Air Plasma Cutting Systems 3 Year Warranty PakMaster 50XL PLUS-CE GENUINE CUT 12.7mm ( 1 2 ) SEVERANCE CUT 19.1mm ( 3 4 ) PakMaster 75XL PLUS-CE GENUINE CUT 19.1mm ( 3 4 ) SEVERANCE CUT 25.4mm (1 ) PakMaster 100XL PLUS-CE GENUINE CUT 25.4mm (1 ) SEVERANCE CUT 31.8mm (1 1 4 ) PakMaster XL PLUS-CE Series PLUS The New SureLok Torch! New Patented SureLok Torch Technology New SureLok Electrode Design Ergonomic Torch Handle Over 40 Years of Plasma Cutting Innovation

2 Features and Benefits SURELOK TORCH SureLok torch technology is an innovation in plasma torch design. Our patented electrode locking mechanism results in precise tip and electrode positioning and more efficient operation, resulting in improved consumable life. The electrode is also easier to install, with no tools required. SMART LOGIC This circuit prevents damage to the unit should it be connected to high line voltage while it is linked for low voltage. SMART START AUTO PILOT RESTART Instantly reignites the pilot arc when the cutting arc is interrupted, such as when cutting expanded metal. This feature keeps the arc on when cutting over holes or moving from one cut to another without having to restart the torch, an important feature for maintaining productivity. after the cutting arc is established. The arc will remain on until the cutting arc is broken at the edge of the metal or if the torch is lifted away from the work piece. This feature can be de-selected by the front panel switch for automated applications or hand applications where the operator needs to be able to stop the arc by release of the torch switch. IP-23C PROTECTION CERTIFIED Thermal Dynamics uses this test to check the unit s ability to perform in difficult conditions. Where other manufacturers use a simple water drip test, Thermal Dynamics uses a high pressure spray test to check the unit s ability to stand up to outdoor weather. FLOW THROUGH COOLING DESIGN All of the semi-conductor devices are mounted on a heatsink. The cooling air is channeled through the fins on the opposite side of the heatsink so that dirty environmental air does not flow directly over the switching devices. This helps to prevent build up of foreign material which could otherwise limit duty cycle or component life. TIP SAVER CURRENT FOLD BACK CIRCUIT Accidental contact between tip and material while cutting or gouging at higher output levels can be expensive with some competitive systems. Our Tip Saver circuit protects consumable parts and eliminates down time by reducing the cutting current while the tip is in contact with the material, saving time and money. TRIGGER LATCH Prevents hand fatigue during long cuts by allowing the torch switch to be released CSA NRTL/C APPROVED The Canadian Standards Association is recognized worldwide as a premier testing laboratory. Thermal Dynamics is proud to comply with the rigorous standards of CSA 22.2 No. 60 for electrical equipment. 3 YEAR WARRANTY PROTECTION PakMaster XL PLUS-CE units come with excellent warranty protection Power supply components are warranted for 3 years; labor, torch and leads for 1 full year. 2 THERMAL DYNAMICS Thermal Dynamics Corp., 2001

3 The SureLok Advantage Thermal Dynamics SureLok torch technology is used throughout the PakMaster XL PLUS-CE family. SureLok torches and consumable parts offer important advantages for hand or mechanized plasma cutting. Improved cutting performance - The patented electrode insertion design results in exact positioning of consumable parts, every time, with no special tools. This means a precise, well-defined cutting arc and more precise cuts. Improved torch cooling Means longer consumable parts life and lower operating costs. Extended tip For maximum visibility and optimum performance in drag cutting. The extended tip provides a clear view of the cut in stand-off or drag cutting. Drag cutting with the tip in contact with the metal results in a narrow kerf, helps eliminate dross and results in greater precision on sheet metal. Tapered shield cup and small torch head Allow excellent control when beveling and gouging. SureLok s size, shape and long arc also make PakMaster XL PLUS-CE an excellent tool for cutting and gouging in tight spaces where other torches will not fit Long arc length SureLok torches produce excellent cuts across a wide range of cutting conditions, from drag cutting with the tip directly on the material, to beveling and gouging, where the tip must be held further away from material. SureLok s strong pilot arc and focused cutting power produce a long arc that gives operators more flexibility and control in demanding situations. Cut Quality PakMaster XL PLUS-CE power supplies deliver exceptionally smooth, powerful cutting current. Combined with the features of the SureLok torch, this makes PakMaster XL PLUS-CE the leader in cut quality. Sheet Metal PakMaster XL PLUS-CE systems excel at drag cutting at current levels below 35 amps. The tip directly touches the metal, resulting in clean cuts, narrow kerf and a very small Heat Affected Zone (HAZ). This quality cannot be achieved with torches that have a bulky shield cup and recessed tip. Stand-off cutting Hold the torch tip 3.2mm - 9.6mm ( ) away from the work for cutting at higher amperage levels. PakMaster XL PLUS-CE systems provide a precise, well-defined arc that results in less top edge rounding, less bevel along the cut edge and a smoother cut surface. Our Tip Saver fold-back circuit protects consumable parts from damage caused by accidental contact with the work. Gouging PakMaster XL PLUS-CE systems can be used for precision gouging with a simple change of consumable parts. With adjustable current settings and the SureLok torch features, PakMaster XL PLUS-CE systems deliver the power and control you need for backgouging welds, separating welded parts or removing hardfacing metals. Our Tip Saver fold-back circuit protects your consumable parts life and makes the torch an easy to use gouging tool. PakMaster 50 XL PLUS-CE cut on 7 gauge mild steel using the optional cutting guide kit 3

4 - Which PakMaster XL PLUS-CE System Do I Need? Several factors should be considered when selecting a plasma system. What is the thickest material to be cut? Genuine cut ratings mean that the system can cut a specific thickness of mild steel at approximately 254mm (10 ) per minute and achieve excellent cut quality. Severance cut rating means the system will cut this thickness of mild steel at a slower rate with some loss in cut quality. Aluminum and stainless steel generally require more power to cut, and cut ratings may vary by as much as 25%. What will I need to pierce? Pierce ratings should be calculated at 50% of genuine cut ratings. How fast do I want to cut? Operator comfort and control is the real determinant of cut speed in hand cutting. More cutting power translates XL PLUS-CE IN PERFORMANCE directly to faster cutting speeds. Mechanized system cutting speeds can be limited by the mechanized positioner capability. What voltage input power is available? PakMaster XL PLUS-CE systems accept 380/415 volts, 50/60Hz., 3-phase power. System Ordering Information: The standard systems include a power supply with 6.1m (20 ) work cable and clamp, torch and leads and spare parts kit. Machine torch systems include phenolic mounting tube and pinch block assembly. Remote Pendant or CNC Cable are not included with systems, see Remote Options below for ordering information. 70 Hand Torch 180 Machine Torch SYSTEM 6.1m (20 ft.) 15.2m (50 ft.) 7.6m (25 ft.) 15.2m (50 ft.) PakMaster 50XL PLUS-CE * * PakMaster 75XL PLUS-CE * * PakMaster 100XL PLUS-CE * * *Remote Control is not included. Order appropriate control from options below. Torch & Lead Combinations (Included with Systems) 70 Hand Torch 180 Machine Torch TORCH 6.1m Leads 15.2m Leads 7.6m Leads 15.2m Leads PCH/M PCH/M SL SL SL SL REPLACEMENT TORCH HEADS ONLY PCH/M PCH/M Remote Options: Computer Control (CNC) Cable: 7.6m (25 ft.) m (50 ft.) Hand Pendant Control with 7.6m (25 ft.) Cable: Extension Cable 7.6m (25 ft.) for Hand Pendant Control: Metal Mounting Tube with Pinion Assembly call (39) for more information 4

5 SureLok Plasma Torches PakMaster 50XL PLUS-CE PCH/M-62 Standard Spare Parts Kit Cat. Number Part Description # O-Ring Electrode (SureLok), General Purpose Gas Distributor, 40 Amp Tip, 40 Amp, Drag Tip, 40 Amp, Stand-off Tip, 40 Amp, Gouging Coil Spring Shield Cup, 40 Amp Stand-off Cutting Guide 1 PakMaster 75XL PLUS-CE PCH/M-102 (60 Amp) Standard Spare Parts Kit Cat. Number Description # O-Ring Electrode (SureLok), General Purpose Gas Distributor, Cutting Gas Distributor, Gouging Tip, 60 Amp, Cutting Tip, 40 Amp, Cutting Tip, Gouging Coil Spring Shield Cup, Cutting Shield Cup, Crown Stand-off Cutting Guide Fuse (0.8A, 600V) Adapter Fitting 1/4 Hose to 1/4 NPT Lubricant Box, Utility 1 PakMaster 100XL PLUS-CE PCH/M-102 (80 Amp) Standard Spare Parts Kit Cat. Number Description # O-Ring Electrode (SureLok), General Purpose Gas Distributor, Cutting Gas Distributor, Gouging Tip, 80 Amp, Cutting Tip, 60 Amp, Cutting Tip, 40 Amp, Cutting Tip, Gouging Coil Spring Shield Cup, Cutting Shield Cup, Crown Stand-off Cutting Guide Fuse (0.8A, 600V) Adapter Fitting 1/4 Hose to 1/4 NPT Lubricant Box, Utility 1 call (39) for more information 5

6 PRODUCT SPECIFICATIONS MASTER 50 XL PLUS-CE MASTER 75 XL PLUS-CE MASTER 100 XL PLUS-CE Cutting System Specification Cutting System Specification Cutting System Specification Power Supply Capacity: 12.7mm Genuine 19.1mm Genuine 25.4mm Genuine 19.1mm Severance 25.4mm Severance 31.8mm Severance Output: Amps - Continuously variable Amps - Continuously variable Amps - Continuously variable Input Power: 220/ VAC (+/-10%) 380/415 VAC (+/-10%) 380/415 VAC (+/-10%) 1/3 Phase, 50/60Hz 3 Phase, 50/60Hz 3 Phase, 50/60Hz 11 Amps, 3 Phase 16 Amps, 3 Phase 25 Amps, 3 Phase Duty cycle: 40 Amps 60 Amps / 55 Amps 80 Amps / 60 Amps Panel Controls: On/Off Switch On/Off Switch On/Off Switch RUN/SET/LATCH Switch RUN/SET/LATCH Switch RUN/SET/LATCH Switch Output Current Potentiometer Output Current Potentiometer Output Current Potentiometer Panel Indicators: AC Power AC Power AC Power Temperature Temperature Temperature Gas Pressure Gas Pressure Gas Pressure DC Output DC Output DC Output Dimensions: Height: 406mm Height: 406mm Height: 406mm Width: 330mm Width: 330mm Width: 330mm Length: 630mm Length: 630mm Length: 630mm Weight: 31.3 Kg 32.2 Kg 34 Kg Work Cable Length: 6.1m 6.1m 6.1m Torch Model PCH/M-62 PCH/M-102 PCH/M-102 Gas: Air Air Air Gas Pressure: 4.8 bar (70 psi) 4.1 bar (60 psi) 4.8 bar (70 psi) Gas Flow: 95 lpm (200 SCFH / 3.3CFM) 142 lpm (300 SCFH / 5CFM) 190 lpm (400 SCFH / 6.6CFM) Pilot: CD Start/ Pulsed DC CD Start/ Pulsed DC CD Start/ Pulsed DC Control: Hand switch Hand switch Hand switch Remote Pendant Remote Pendant Remote Pendant CNC Interface Cable CNC Interface Cable CNC Interface Cable Torch Lead length: Hand 6.1m 6.1m 6.1m 15.2m 15.2m 15.2m Machine 7.6m 7.6m 7.6m 15.2m 15.2m 15.2m ACCESSORIES Air Filter Kit Cat. No Micron Particulate Filter for use on compressed shop air systems Cutting Guide Cat. No Manual circle cutting guide, 2" to 16" circles Cutting Guide Kit Cat. No Easy add-on attachments to allow for straight line,circle cutting and beveling for all XL PLUS-CE Systems Multi-Purpose Cart Cat. No Rugged steel cart with large rubber wheels, swivel casters and extra shelf to maximize system portability WORLD HEADQUARTERS: 101 S. Hanley Road St. Louis, MO FAX EUROPEAN CUSTOMER SERVICE: Via Rio Fabbiani, 8A Rastignano (Bologna) - ITALY (39) FAX (39) International Offices International Customer Service Thermadyne Canada Thermadyne UK Thermadyne Asia Sdn. Bhd. Cigweld Australia Oakville, Ontario, Canada Oakville, Ontario Canada Chorley, England Kuala Lumpur, Malaysia Melbourne, Australia Ph: (1) Ph: (1) Ph: (44) Ph: (603) Ph: (61) Fax: (1) Fax: (1) Fax: (44) Fax: (603) Fax: (61) Thermadyne do Brasil Thermadyne Middle East Thermadyne de Mexico Thermadyne Japan Thermadyne Europe Rio de Janeiro, Brazil Dubai, United Arab Emirates Mexico City, Mexico Osaka, Japan Milan, Italy Ph: (55) Ph: (971) Ph: (52) Ph: (81) Ph: (39) Fax: (55) Fax: (971) Fax: (52) Fax: (81) Fax: (39) Form No a (1/03) Thermal Dynamics Corp., Printed in U.S.A.

Arc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources

Arc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources Arc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources FP90 Enjoy the ease of wire feed welding at an affordable price. This unit operates on standard 115 volt household current and requires no

More information

One Torch for Virtually Any Plasma Cutting System! Total Plasma Cutting Flexibility. Available With Our ATC

One Torch for Virtually Any Plasma Cutting System! Total Plasma Cutting Flexibility. Available With Our ATC One Torch for Virtually Any Plasma Cutting System! Total Plasma Cutting Flexibility Available With Our ATC Quick Change Connector! The Revolution in Plasma Torches Has Begun Introducing the First Universal

More information

MASTER XL PLUS PLASMA CUTTING SERIES

MASTER XL PLUS PLASMA CUTTING SERIES New Products PAK MASTERXL PLUS PLASMA CUTTING SERIES 3 Year Warranty PAK MASTER 50 XL PLUS GENUINE CUT 1/2 (13mm) SEVERANCE CUT 3/4 (19mm) PAK MASTER 75 XL PLUS GENUINE CUT 3/4 (19mm) SEVERANCE CUT 1 (25.4mm)

More information

Total Plasma Cutting Flexibility. One Torch for Virtually Any Plasma Cutting System! Take the Challenge. Available With Our ATC

Total Plasma Cutting Flexibility. One Torch for Virtually Any Plasma Cutting System! Take the Challenge. Available With Our ATC MANUAL SYSTEMS REPLACEMENT PLASMA CUTTING TORCH One Torch for Virtually Any Plasma Cutting System! Take the Challenge 30 Days, 100% Satisfaction or Your Money Back, Guaranteed! Call 1-800-752-7621 for

More information

CUTMASTER, Why TRUE? THREE YEAR WARRANTY. Thermal Dynamics Professional: When cutting and welding is your business WHEN YOU NEED IT.

CUTMASTER, Why TRUE? THREE YEAR WARRANTY. Thermal Dynamics Professional: When cutting and welding is your business WHEN YOU NEED IT. CUTMASTER, Why TRUE? The CUTMASTER TRUE Series has been designed with the premise that recommended cut capacity should reflect the TRUE cut capacity. The TRUE Cut Series eliminates the concept of having

More information

HMC-410 AUTOMATIC OR SEMIAUTOMATIC CONTROL PANEL AND FEEDHEAD ASSEMBLY

HMC-410 AUTOMATIC OR SEMIAUTOMATIC CONTROL PANEL AND FEEDHEAD ASSEMBLY A THERMADYNE Company HMC-410 AUTOMATIC OR SEMIAUTOMATIC CONTROL PANEL AND FEEDHEAD ASSEMBLY FOR A COMPLETE SYSTEM, ORDER: Cat. No. 170896A-002 Cat. No. 500019C-001 Cat. No. 870060-001 Cat. No. 870058 Cat.

More information

88 Plasma Cutting Cuts Steel, stainless steel, aluminium, cast iron, copper brass, titanium, magnesium alloys Typical Usage Metal fabrication, construction, weld repair, automotive repair, automotive racing,

More information

Available in & International Customer Care: / FAX

Available in & International Customer Care: / FAX Available in 75 90 & 80 International Customer Care: 940-38-22 / FAX 940-483-878 page The Only Universal Plasma! As a replacement (RPT ) torch, the has the ability to work on the majority of plasma power

More information

CUTMASTER A-SERIES AUTOMATED PLASMA CUTTING SYSTEMS. We Bring Intelligence to the Table. Victor Thermal Dynamics introduces

CUTMASTER A-SERIES AUTOMATED PLASMA CUTTING SYSTEMS. We Bring Intelligence to the Table. Victor Thermal Dynamics introduces AUTOMATED PLASMA CUTTING SYSTEMS ictor Thermal Dynamics introduces CUTMASTER A-SERIES The Cutmaster A-Series is the intelligent solution for economical and flexible plasma cutting with the proven reliability

More information

victor thermal dynamics cutmaster true series

victor thermal dynamics cutmaster true series victor thermal dynamics Victor Thermal Dynamics CUASTER, Why TRUE? The CUASTER TRUE Series has been designed with the premise that recommended cut capacity should reflect the TRUE cut capacity. The TRUE

More information

Repeatable welds again, and again, and again

Repeatable welds again, and again, and again INERTER CC DC AMP 575 Repeatable welds again, and again, and again 5 Year * Ultima comes with: Ultima unit Quick Change Torch** Torch spare parts kit Coolant Quick Specifications # Processes Plasma Arc

More information

GMAW FCAW AMP. Higher Output. The Fabricator 140 punches out 140 amp maximum output.

GMAW FCAW AMP. Higher Output. The Fabricator 140 punches out 140 amp maximum output. Fabricator 40 40 C DC 20 Power, Performance, Features... and Reliability 5Year * Quick Specifications Processes MIG () Flux Cored () Industrial Applications Maintenance and Repairs Sheet Metal Fabrication

More information

Powerful. Durable. Simple. PowerCut Series PLASMARC CUTTING EQUIPMENT

Powerful. Durable. Simple. PowerCut Series PLASMARC CUTTING EQUIPMENT Powerful. Durable. Simple. PowerCut Series PLASMARC CUTTING EQUIPMENT Plasma Cutting What is plasma cutting? Plasma is an ionized gas that is electrically conductive giving you the ability to cut most

More information

Thermal Arc Professional: when welding is your business. Introducing the Portafeed VS 212. Portafeed VS 212

Thermal Arc Professional: when welding is your business. Introducing the Portafeed VS 212. Portafeed VS 212 Thermal Arc Professional: when welding is your business Thermal Arc is on the move! The Thermal Arc family of arc welding equipment has been completely overhauled, re-engineered and expanded following

More information

Manual Plasma Cutting Inverters

Manual Plasma Cutting Inverters Manual Plasma Cutting Inverters AEQPLA Rev 2 100 654 674 I www.cigweld.com.au Introduction ictor Technologies Professional: When cutting and welding is your business At ictor Technologies we distinguish

More information

Plasma Arc Cutting. Introducing: MANUAL SYSTEMS, TORCHES & ACCESSORIES QUICK REFERENCE PRODUCT GUIDE

Plasma Arc Cutting. Introducing: MANUAL SYSTEMS, TORCHES & ACCESSORIES QUICK REFERENCE PRODUCT GUIDE Plasma Arc Cutting MANUAL SYSTEMS, TORCHES & ACCESSORIES QUICK REFERENCE PRODUCT GUIDE June 2006 Introducing: The Portable Drag-Gun Plus with Built-in Air Compressor (see page 5) www.thermal-dynamics.com

More information

PowerCut 900/1600 PLASMA CUTTING EQUIPMENT

PowerCut 900/1600 PLASMA CUTTING EQUIPMENT PowerCut 900/1600 PLASMA CUTTING EQUIPMENT Powerful, durable, simple Rugged steel case Torch wrap and wear part kit holder Glass-reinforced nylon handles/ guards Digital panel Trigger lock function (2/4

More information

4.09 Cutting Speed Chart: Mild Steel, SL100 Torch with Exposed Tip

4.09 Cutting Speed Chart: Mild Steel, SL100 Torch with Exposed Tip 4.09 Cutting Speed Chart: Mild Steel, SL100 Torch with Exposed Tip Art # A-04203 Electrode Start Cartridge Tip Shield Cup Body Shield Cap, Deflector 9-8215 9-8213 9-8237 9-8243 Torch: SL100 with Exposed

More information

PTE-100H PTE-100M Plus

PTE-100H PTE-100M Plus The new series of Torches without High Frequency Start With EASY FIT A revolutionary solution to save time and money PTE-100H PTE-100M PTE-105HPlus Plus PTE-105MPlus Plus THE-125 TME-125 Higher performances

More information

Air Carbon Arc Gouging Torches & Equipment; Slice Exothermic Cutting Systems. Gouging & Cutting Products & Accessories

Air Carbon Arc Gouging Torches & Equipment; Slice Exothermic Cutting Systems. Gouging & Cutting Products & Accessories Air Carbon Arc Gouging Torches & Equipment; Slice Exothermic Cutting Systems Gouging & Cutting Products & Accessories Gouging & Cutting Products & Accessories EXTREME Air Carbon Arc Gouging Torches Angle-Arc

More information

A Single RPT Torch for Any Plasma Systems from 30 to 120 Amp.

A Single RPT Torch for Any Plasma Systems from 30 to 120 Amp. INTRODUCES A Single RPT Torch for Any Plasma Systems from 30 to 0 Amp. The new Patent Pending torch with and without High Frequency Start Patent Pending With ith Technology Higher performances Cleaner

More information

1YR. ESAB Cutmaster100. Heavy Industrial. Product picture

1YR. ESAB Cutmaster100. Heavy Industrial. Product picture ESAB Cutmaster100 Heavy Industrial The ESAB Cutmaster 100 weighs in at 28 kg and provides 100 amps of cutting power. This unit s light weight compact design makes it the most portable and powerful cutting

More information

Hypertherm has a wide variety of handheld systems to meet your applications. Choose the thickness capacity that you require.

Hypertherm has a wide variety of handheld systems to meet your applications. Choose the thickness capacity that you require. Hypertherm has a wide variety of handheld systems to meet your applications. Choose the thickness capacity that you require. MANUAL SYSTEM SECTIONS: Company Technology Products Contact us Service Careers

More information

Repeatable welds again, and again, and again

Repeatable welds again, and again, and again INERTER DC CC 150 Repeatable welds again, and again, and again 5 Year * Ultima 150 comes with: Ultima 150 unit Quick Change Torch** Torch spare parts kit Coolant Quick Specifications # Processes Plasma

More information

Powermax Selection Guide

Powermax Selection Guide Powermax Selection Guide Handheld and mechanized plasma systems for cutting and gouging metal Contents 3 Hypertherm: Company overview 5 Understanding plasma technology 6 Why choose Powermax over oxyfuel

More information

Portable Extractor Products 1XP Series Pumps

Portable Extractor Products 1XP Series Pumps Portable Extractor Products 1XP Series Pumps Product Quality, Reliability and Support You Expect www.catpumps.com Decrease Downtime and Increase Profits with Cat Pumps Quality that keeps your equipment

More information

teambrite Supply Steambrite Supply Created on: : Saturday 06 April, 2019

teambrite Supply Steambrite Supply Created on: : Saturday 06 April, 2019 Model Number: 500566 Hobart AirForce 500566 Hobart AirForce 40i Plasma Cutter â 230V, 40 Amps Output Model FREE SHIPPING Manufacturer: Hobart Hobart AirForce 500566 Hobart AirForce 40i Plasma Cutter 230V,

More information

Selecting the Right Torch Package for Your Needs...It s as easy as 1, 2, 3!

Selecting the Right Torch Package for Your Needs...It s as easy as 1, 2, 3! 1Torch The First Universal Plasma Torch! The 1Torch RPT torch is the fi rst plasma cutting torch that performs with virtually all plasma cutting power supplies. The 1Torch works with high frequency start

More information

Powermax Selection Guide

Powermax Selection Guide Powermax Selection Guide H a n d h e l d a n d m e c h a n i z e d p l a s m a s y s t e m s f o r c u t t i n g a n d g o u g i n g m e t a l Contents 3 Hypertherm: Company overview 5 Understanding plasma

More information

1STEP 1TORCHSL100 1TORCHSL60 SELECTING THE RIGHT TORCH PACKAGE FOR YOUR NEEDS... Torch and Lead Selection MEDIUM/HEAVY DUTY TORCH ( AMPS)

1STEP 1TORCHSL100 1TORCHSL60 SELECTING THE RIGHT TORCH PACKAGE FOR YOUR NEEDS... Torch and Lead Selection MEDIUM/HEAVY DUTY TORCH ( AMPS) SELECTING THE RIGHT TOH PCKGE FOR YOUR NEEDS... and Leads STEP 1 gives you all the information to select the right torch. - Manual (pg 9) - Mechanized & utomation (pg 10) Select: Standard or RPT (O2) or

More information

Centricut plasma torches and consumables for Thermal Dynamics

Centricut plasma torches and consumables for Thermal Dynamics plasma torches and consumables for Thermal Dynamics Contents Plasma Product is available for the following major OEM brands AMADA ESAB Kaliburn KJELLBERG KOIKE KOMATSU LINCOLN THERMAL DYNAMICS WHITNEY

More information

Tough, Compact... and Portable

Tough, Compact... and Portable INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () MIG

More information

V350-PRO. (1) Advanced Process Panel only. TECHNICAL SPECIFICATIONS

V350-PRO. (1) Advanced Process Panel only. TECHNICAL SPECIFICATIONS ENGINE MULTI-PROCESS DRIVEN WELDERS Invertec Designed Smart. Built Tough. V350-PRO The is a versatile, multi-purpose, multi-process power source that s lightweight and portable. Available in Construction,

More information

SubArc Digital Series

SubArc Digital Series Series Issued June 208 Index No. AD/7. Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy fabrication Pipe manufacturing Pressure vessel Processes Submerged

More information

Tough, Compact... and Portable

Tough, Compact... and Portable INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () Flux

More information

complete Kit with: ST120 torch Ground cable WELDING MACHINES & BATTERY CHARGERS

complete Kit with: ST120 torch Ground cable WELDING MACHINES & BATTERY CHARGERS Viale Galileo Galilei 123 36066 Sandrigo (VI) Italy Tel. +39 0444 666999 Fax. +39 0444 750070 info@helvi.com www.helvi.com PC 123 CNC Robotic machine interface complete Kit with: ST120 torch Ground cable

More information

Welding Equipment Trolley Part Number: W General Information. Recommended Tools. Manual Rev AA WARNING

Welding Equipment Trolley Part Number: W General Information. Recommended Tools. Manual Rev AA WARNING Manual 0-5094 Rev AA Cigweld Pty Ltd 71 Gower Street Preston, Victoria, Australia, 3072 Telephone: +61 3 9474 7400 FAX: +61 3 9474 7488 Email: cigweldsales@cigweld.com.au Website: www.cigweld.com.au! WARNING

More information

Consumables for Kjellberg systems Excellent performance, speed and quality at a competitive price

Consumables for Kjellberg systems Excellent performance, speed and quality at a competitive price Consumables for Kjellberg systems Excellent performance, speed and quality at a competitive price Contents 2 SilverLine and CoolFlow technologies 3 Consumables for Kjellberg HiFocus 100 and 130/160i using

More information

Precision TIG 375. The Power To Perform! Advantage Lincoln TIG WELDERS. Output. Input 1 PHASE. Publication E /05

Precision TIG 375. The Power To Perform! Advantage Lincoln TIG WELDERS. Output. Input 1 PHASE. Publication E /05 TIG WELDERS Precision TIG 375 The Power To Perform! The Precision TIG TM 375 delivers the Power to Perform setting a new standard in Square Wave Technology. Combining outstanding value-added features and

More information

PH-70. plasma cutting torches A-PH A-TH. Technical Data Current : Amps Duty Cycle: 70 Amps 50%

PH-70. plasma cutting torches A-PH A-TH. Technical Data Current : Amps Duty Cycle: 70 Amps 50% 2017-05-A-TH Technical Data Current : 20-70 Amps Duty Cycle: 70 Amps 50% Gas: Air/N2 Gas Pressure - Cutting: 72-80 PSI (5.0-5.5 bar) - Gouging: 58-65 PSI (4.0-4.5 bar) Gas Flow at 70A: 390 scfh (185 lpm)

More information

GENERAL WELDING PRODUCTS CATALOG

GENERAL WELDING PRODUCTS CATALOG GENERAL WELDING PRODUCTS CATALOG The Thermadyne Specialty Markets group operates within multiple distribution channels to meet the needs of several distinct industry segments. Specialty Markets These

More information

Engine Driven Welding Equipment

Engine Driven Welding Equipment Engine Driven Welding Equipment AEQEDW Rev 1 1300 654 674 I www.cigweld.com.au Introduction Contents CIGWELD Professional: When welding is your business At Victor Technologies we distinguish ourselves

More information

MAXPRO200 Instruction Manual Revision 2 99 Estimated kerf-width compensation The kerf widths in the following charts are for reference. Differe

MAXPRO200 Instruction Manual Revision 2 99 Estimated kerf-width compensation The kerf widths in the following charts are for reference. Differe Hypertherm Dross Low-speed dross forms when the torch s cutting speed is too slow and the arc shoots ahead. It forms as a heavy, bubbly deposit at the bottom of the cut and can be removed easily. Increase

More information

PowerPoints & PowerPinners

PowerPoints & PowerPinners PowerPoints & s Light Duty Portable Welded Insulation Fastening Solutions www.gripnail.com 800-474-7624 Heavy Duty Portable Fixed Head Gliding Head Local Gripnail Distributor Gripnail Corporation An Employee-Owned

More information

TEC.MO. Plasma Torches & Consumables THERMAL DYNAMICS PCH-25/26/28/38 PCH/M-35/40. Compatible parts suitable for: Thermal Dynamics

TEC.MO. Plasma Torches & Consumables THERMAL DYNAMICS PCH-25/26/28/38 PCH/M-35/40. Compatible parts suitable for: Thermal Dynamics TEC.MO. PCH-/// PCH/M-/0 0 a -0 00 0 Torch head -0 00 0 Torch head a -0 00 0 Torch head ns - 0 Machine handle -0 000. O-Ring 00 Handgrip with microswitch -00 /D Electrode -00 Electrode OEM style -00 000

More information

5 AXIS CNC WELD PREPARATION MACHINE HIGH-PERFORMANCE CNC PLASMA CUTTING

5 AXIS CNC WELD PREPARATION MACHINE HIGH-PERFORMANCE CNC PLASMA CUTTING metaltek PORTABLE CNC ENGINEERING SOLUTIONS metaltek PORTABLE 5 AXIS CNC WELD PREPARATION MACHINE HIGH-PERFORMANCE CNC PLASMA CUTTING Manufactured in Australia by Metaltek is a wholly owned subsidiary

More information

Plasma Cutting. Futuris Plasma torches and replacement parts are not genuine OEM products. Reference to OEM parts is for ease of use only.

Plasma Cutting. Futuris Plasma torches and replacement parts are not genuine OEM products. Reference to OEM parts is for ease of use only. Binzel Style Plasma Spares 82-83 Cebora Style Plasma Spares 84-87 Hypertherm Style Plasma Spares 88-91 Thermal Dynamics Style Plasma Spares 92-95 Trafimet Style Plasma Spares 96-99 Plasma Cutting Futuris

More information

Description. Order TECHNICAL SPECIFICATIONS

Description. Order TECHNICAL SPECIFICATIONS SEMIAUTOMATIC WIRE FEEDERS Semiautomatic, Constant Speed Wire Feeders The are semiautomatic constant speed wire feeders that provide dependable performance and reliable operation, making them ideal for

More information

Self-Propelled. Scissor Lifts

Self-Propelled. Scissor Lifts Self-Propelled Scissor Lifts Customers First Always Partnering for Success Our dedication to lifting you higher extends well beyond the physical reach of our products. We thrive on building satisfying

More information

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW)

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW) Millermatic 255 Issued January 2019 Index No. DC/12.8 MIG Power Source, Wire Feeder and Gun Package Quick Specs Industrial Applications General fabricators Contract welding services Plant maintenance shops

More information

ARCAIR IS SYNONYMOUS WITH CARBON ARC GOUGING

ARCAIR IS SYNONYMOUS WITH CARBON ARC GOUGING ARCAIR IS SYNONYMOUS WITH CARBON ARC GOUGING 1980s SLICE torch introduced, allowing for portable and quick cutting solutions for fire and rescue operations. 1983 Introduces K4000 cutting and gouging torch.

More information

3202 PowerMaster brochure 18/5/06 4:37 PM Page 2 PowerMaster Range

3202 PowerMaster brochure 18/5/06 4:37 PM Page 2 PowerMaster Range PowerMaster Range Thermal Arc Professional: when welding is your business Thermal Arc is on the move! The Thermal Arc family of arc welding equipment has been completely overhauled, re-engineered and expanded

More information

LN-9 AND LN-9 GMA. Semiautomatic Wire Feeders THE WELDING EXPERTS

LN-9 AND LN-9 GMA. Semiautomatic Wire Feeders THE WELDING EXPERTS LN-9 AND LN-9 GMA Semiautomatic Wire Feeders THE WELDING EXPERTS LN-9 AND LN-9 GMA LN-9 GMA shown with CV-655 power source, K1524-1 universal wire reel stand, K1504-1 50/60 lb. coil adapter, K163 undercarriage

More information

Semi-Automatic Wire Feeders. Semi-Automatic Contents Wire Feeders. Equipment

Semi-Automatic Wire Feeders. Semi-Automatic Contents Wire Feeders. Equipment Semi-Automatic Contents Wire Feeders Semi-Automatic Wire Feeders LF-72 & LF-74 LN-742 LN-8 LN-9 LN-10 DH-10 Power Feed TM 25M Power Feed TM 10M Power Feed TM 10M Dual LN-23P LN-25 Page 2 Page 3 Page 4

More information

Patent pending. Patented

Patent pending. Patented Patent pending Patented Quick Disconnect Manual Mechanized Automated EASY FIT EASY FIT EASY FIT 2018-01-A PHTD plasma cutting t RPT-T RPT-T for TD 1TORCH Esab Thermal Dynamics Victor SL-60 & SL-100 QD

More information

HAND HELD AND ROBOTIC MIG GUNS HAND HELD AND ROBOTIC MIG GUNS FROM 180 TO 500 AMP

HAND HELD AND ROBOTIC MIG GUNS HAND HELD AND ROBOTIC MIG GUNS FROM 180 TO 500 AMP HAND HELD AND ROBOTIC MIG GUNS HAND HELD AND ROBOTIC MIG GUNS FROM 180 TO 500 AMP H A N D H E L D G U N S ATTC Makes Over 2500 MIG Gun Combinations. More Choices Than Any Other Company American Torch Tip

More information

LN-8. Semiautomatic Wire Feeder LINCOLN ELECTRIC

LN-8. Semiautomatic Wire Feeder LINCOLN ELECTRIC LN-8 Semiautomatic Wire Feeder LN-8 WIRE FEEDER LN-8 shown with DC-600 power source, K1524-1 universal wire reel stand, K1557-1 swivel platform and a Magnum 400 gun and cable assembly. The LN-8 is a semiautomatic

More information

Patent pending. Patented

Patent pending. Patented Patent pending Patented Quick Disconnect Manual Mechanized Automated EASY FIT EASY FIT EASY FIT 2018-01-A PHTD 2018-10 A PHTD RPT-T RPTches for TD 1TORCH Esab Thermal Dynamics Victor SL-60 & SL-100 QD

More information

PT-37 PLASMARC TORCH. PT-37 Torch. Specifications. Optional Accessories. Consoles PowerCut 1300, PowerCut 1600, ESP-101. Ordering Information.

PT-37 PLASMARC TORCH. PT-37 Torch. Specifications. Optional Accessories. Consoles PowerCut 1300, PowerCut 1600, ESP-101. Ordering Information. PT-37 PLASMARC TORCH PT-37 Torch The patented PT-37 torch cuts up to 1.25 (32 mm) material using air as the plasma and shielding gas. Utilizing a blowback start and an electronically controlled pilot arc

More information

Collet Closers 101

Collet Closers 101 www.lexairinc.com Ph: 859-255-5001 Fax: 859-255-6656 Collet Closers 101 What they are, how they work, what it takes to make them function. Lexair is a privately held, American owned corporation committed

More information

Plasma Cutting Power Supply

Plasma Cutting Power Supply Plasma Cutting Power Supply CutMaster 50 A-02766 Operating Manual April 21, 2003 Manual No. 0-2805 WARNINGS Read and understand this entire Manual and your employer s safety practices before installing,

More information

TWIN WIRE ARC SPRAY SYSTEM, MODEL: ARCJET -99/600

TWIN WIRE ARC SPRAY SYSTEM, MODEL: ARCJET -99/600 TWIN WIRE ARC SPRAY SYSTEM, MODEL: ARCJET -99/600 EQUIPMENT DESCRIPTION : The Arc Spray Unit; Model : 99/600 combines typical features of the arc spray technology such as reliability and robustness with

More information

PipePro Welding System

PipePro Welding System PipePro Welding System Root-Fill-Cap Welding Issued Feb. 008 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Applications Process Piping Offshore Piping Onshore Piping Pipe

More information

MUST BE UL LISTED or EQUIVALENT

MUST BE UL LISTED or EQUIVALENT 1 01 2 PKG MIG WELDER Rated Output: 200 Amps at 28 VDC 60% Duty Cycle or 250 A, 28 VDC at 40% Duty Cycle Max Open-Cicuit Voltage: 38 Wire Feed speed: 50-700 IPM Package includes: #MMM252 (#907321) Welder

More information

pl & PL-C Series plasma DURMA

pl & PL-C Series plasma DURMA pl & PL-C Series plasma Better Parts Better profits PL Series plasma PL-C PL standard equipment Independent Zoned & Partitioned Table Hypertherm Automatic Gas Console Siemens AC Digital Servo Motors Rack

More information

SPECTRACOOL SLIM FIT AIR CONDITIONERS EQUIPMENT PROTECTION

SPECTRACOOL SLIM FIT AIR CONDITIONERS EQUIPMENT PROTECTION SPECTRACOOL SLIM FIT AIR CONDITIONERS Design with CONFIDENCE EQUIPMENT PROTECTION THE ULTIMATE IN COOLING CONVENIENCE Loaded with features and options to take the hassles out of industrial cooling. Spectracool

More information

Cut Charts and Marking Charts

Cut Charts and Marking Charts WARNING EXPLOSION HAZARD CUTTING WITH ALUMINUM NEAR WATER Do not cut aluminum alloys underwater or on a water table unless you can prevent the accumulation of hydrogen gas. Never cut aluminum-lithium alloys

More information

Gouging Electrodes Excellent arc stability. Superior metal removal rate. Cool operation. Uniform diameter. Clean machine-like grooves and cuts.

Gouging Electrodes Excellent arc stability. Superior metal removal rate. Cool operation. Uniform diameter. Clean machine-like grooves and cuts. Arc Welding Equipment Gouging Electrodes Gouging Electrodes Excellent arc stability. Superior metal removal rate. Cool operation. Uniform diameter. Clean machine-like grooves and cuts. DC Jetrod Copperclad

More information

1900 Series Universal Media. Best Under Pressure Series. Universal Media Pressure Relief Valve

1900 Series Universal Media. Best Under Pressure Series. Universal Media Pressure Relief Valve Best Under Pressure 1900 Series Universal Media 1900 Series Universal Media Pressure Relief Valve Flexibility Performance Durability 2 Dresser Consolidated Handles liquid and vapor interchangeably without

More information

Tough, Compact... and Portable

Tough, Compact... and Portable INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () Flux

More information

MACH 4 WATERJET SERIES YEARS AHEAD.

MACH 4 WATERJET SERIES YEARS AHEAD. MACH 4 WATERJET SERIES YEARS AHEAD. OPERATOR CONVENIENCE EFFICIENCY THROUGH DETAILS We work hard to provide operator convenience features that allow you to cut faster, more accurate parts. 1 4 2 3 LIGHTS

More information

Master Flo Valve Inc.

Master Flo Valve Inc. Actuation Master Flo Valve Inc. Master Flo Valve Inc. is the technological leader and world-class manufacturer of surface and subsea chokes, specialty control valves and supporting actuation. Privately

More information

Processes MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz. Two Machines in One!

Processes MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz. Two Machines in One! Millermatic 212 Auto-Set Issued Oct. 2008 Index No. DC/12.46 MIG Arc Welding Power Source Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light Industrial The Power

More information

LINC GUN THE ULTIMATE MIG GUNS

LINC GUN THE ULTIMATE MIG GUNS LINC GUN THE ULTIMATE MIG GUNS STICK GUNS AND WELDERS TORCHES LINC GUN The ultimate MIG guns Complete range to support all your welding applications. High quality rugged product build according to Lincoln

More information

INDUSTRIAL Gas Apparatus CutSkill & FirePower Products

INDUSTRIAL Gas Apparatus CutSkill & FirePower Products INDUSTRIAL Gas Apparatus CutSkill & FirePower Products Catalog www.victorequip.com Quality Statement Victor is committed to providing superior quality, reliable apparatus that earn our customers confidence.

More information

Section 4 - Plasma cutting General information and choice criteria

Section 4 - Plasma cutting General information and choice criteria Section 4 - Plasma cutting General information and choice criteria 909-0 The new range of plasma cutting equipment developed by SAF-FRO heralds a technological revolution in the field of compressed air

More information

HD II Plasma Cutter Specifications

HD II Plasma Cutter Specifications PLASMA BASE DESIGN HD II Plasma Cutter Specifications Automatic Digital Torch Height Control Torch Error Detection (Increases Consumable Life) Automatic Torch Touch Off Backed with over 30 Years of CNC

More information

Subarc DC Series. Processes Submerged Arc (SAW) Stick (SMAW) Air Carbon Arc Cutting and Gouging (CAC-A) Subarc DC 650 shown.

Subarc DC Series. Processes Submerged Arc (SAW) Stick (SMAW) Air Carbon Arc Cutting and Gouging (CAC-A) Subarc DC 650 shown. Subarc DC Series Issued August Index No. DC/9. Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy Fabrication Pipe Manufacturing Pressure Vessel Processes

More information

Today Numatics is proud to be a part of the Industrial Automation Division of Emerson Electric Co.

Today Numatics is proud to be a part of the Industrial Automation Division of Emerson Electric Co. Draft Copy 07-09-09 Draft Copy 06-24-09 Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application

More information

212 Millermatic MIG Arc Welding Power Source,

212 Millermatic MIG Arc Welding Power Source, Issued Jan. 2013 Index No. DC/12.46 212 Millermatic MIG Arc Welding Power Source, Auto-Set Wire Feeder and Gun Package Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home

More information

GANTRY TYPE CNC PLASMA CUTTING MACHINE MODEL : GSII

GANTRY TYPE CNC PLASMA CUTTING MACHINE MODEL : GSII GANTRY TYPE CNC PLASMA CUTTING MACHINE MODEL : GSII - 4000 TECHNICAL DETAILS : ITEM DESCRIPTION GSII-4000+PMX105 MACHINE BODY CUTTING TORCH Main Frame Machine Size (mm) Effective Cutting Area (mm) Optional

More information

GO-FER. One Machine for All Applications!

GO-FER. One Machine for All Applications! 412-331-1776 www.bugo.com GO-FER IV 3 Year Warranty One Machine for All Applications! Bug-O Systems is guided by honesty, integrity and ethics in service to our customers and in all we do. The GO-FER IV

More information

VERSA-CUT 60 PLASMA CUTTER

VERSA-CUT 60 PLASMA CUTTER Part #14099 VERSA-CUT 60 PLASMA CUTTER ASSEMBLY & OPERATING INstructions (PDF version available at eastwood.com/14099manual) Our Eastwood-designed Versa-Cut 60 Plasma Cutter is your smartest choice for

More information

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW)

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW) Millermatic 255 Issued Oct. 2018 Index No. DC/12.8 MIG Power Source, Wire Feeder and Gun Package Quick Specs Industrial Applications General fabricators Contract welding services Plant maintenance shops

More information

Millermatic Series. All-In-One MIG Buyer s Guide. Everything You Need Everywhere You Need It.

Millermatic Series. All-In-One MIG Buyer s Guide. Everything You Need Everywhere You Need It. Millermatic Series All-In-One MIG Buyer s Guide Everything You Need Everywhere You Need It. Table Of Contents Everything You Need 4 Everywhere You Need It A Complete Line Of 5 All-In-One MIG Welders Fully

More information

Series. Processes TIG (GTAW) MIG (GMAW) Plasma Cutting Resistance Welding. Coolmate Coolant

Series. Processes TIG (GTAW) MIG (GMAW) Plasma Cutting Resistance Welding. Coolmate Coolant Series Issued April 2013 Index No. AY/7.2 Coolmate Coolant Systems Quick Specs Light/Heavy Industrial Applications Manufacturing Aerospace Automotive Tube Mills Automation Processes TIG (GTAW) MIG (GMAW)

More information

Tough, Compact... and Portable

Tough, Compact... and Portable INERTER Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG (GMAW)** Flux Cored

More information

Plasma Cutting Torches

Plasma Cutting Torches PT-60 Plasma Cutting Torches Model Plasma cutting torch Current range Duty cycle 80% Gas Gaspressure Gasflow Ignition Accessories Circle cutting attachment 19460180 Cutting guide 19460182 PT-60 with coaxialcable

More information

PipePro Welding System

PipePro Welding System PipePro Welding System Root-Fill-Cap Welding Issued Apr. 00 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Applications Process Piping Offshore Piping Onshore Piping Pipe Fabrication

More information

Processes MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz

Processes MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz Millermatic 212 Auto-Set Issued Sept. 2009 Index No. DC/12.46 MIG Arc Welding Power Source Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light Industrial The Power

More information

TECHNOLOGY FOR THE WELDER S WORLD. PLASMA. Product Catalogue 2.2 / V1.

TECHNOLOGY FOR THE WELDER S WORLD. PLASMA. Product Catalogue 2.2 / V1. TECHNOLOGY FOR THE WELDER S WORLD. PLASMA Product Catalogue 2.2 / V1 www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches ABIPLAS CUT air cooled Page 04 05 ABIPLAS CUT 70 / ABIPLAS

More information

TE CHMA -TABLE ASMA TOR CNC PL

TE CHMA -TABLE ASMA TOR CNC PL CNC PLASMA-TABLE TORCHMATE 4400 4800 The Lincoln Electric Company Founded in 1895 by John C. Lincoln, The Lincoln Electric Company is the world leader in the design, development and manufacture of arc

More information

Issued Nov Index No. AY/7.2 Coolmate Series. Processes TIG (GTAW) MIG (GMAW) Plasma Cutting Resistance Welding. Coolmate 3

Issued Nov Index No. AY/7.2 Coolmate Series. Processes TIG (GTAW) MIG (GMAW) Plasma Cutting Resistance Welding. Coolmate 3 Issued Nov. 2013 Index No. AY/7.2 Coolmate Series Coolant Systems Quick Specs Light/Heavy Industrial Applications Manufacturing Aerospace Automotive Tube Mills Automation Processes TIG (GTAW) MIG (GMAW)

More information

SafeSite LED Based Signaling for Hazardous Locations

SafeSite LED Based Signaling for Hazardous Locations SafeSite LED Based Signaling for Hazardous Locations On when it matters most. Products and solutions that protect your business 2 www.dialight.com MDTFSFSTBROCHURE_H Features & Benefits 5 year warranty

More information

Power Feed 10R. Compact Wire Drive System for Automation. Processes. Description. Recommended General Options. Advantage Lincoln

Power Feed 10R. Compact Wire Drive System for Automation. Processes. Description. Recommended General Options. Advantage Lincoln AUTOMATIC WIRE FEEDERS Power Feed 10R Compact Wire Drive System for Automation The is a high performance, digitally controlled wire feeder designed to be a part of a modular, multi-process welding system.

More information

GO-FER. One Machine for All Applications!

GO-FER. One Machine for All Applications! 412-331-1776 www.bugo.com GO-FER IV 3 Year Warranty One Machine for All Applications! Bug-O Systems is guided by honesty, integrity and ethics in service to our customers and in all we do. The GO-FER IV

More information

Smart design has its rewards. NEW! Thermo Scientific MSC-Advantage Class II Biological Safety Cabinet. Part of Thermo Fisher Scientific

Smart design has its rewards. NEW! Thermo Scientific MSC-Advantage Class II Biological Safety Cabinet. Part of Thermo Fisher Scientific Smart design has its rewards NEW! Thermo Scientific MSC-Advantage Class II Biological Safety Cabinet Part of Thermo Fisher Scientific MSC MSC-Advantage: Laboratories today are facing new challenges. Safety

More information

PLASMA. Product Catalogue 2.0/V1.

PLASMA. Product Catalogue 2.0/V1. T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. PLASMA Product Catalogue 2.0/V1 www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches ABIPLAS CUT air cooled Page 04 05 ABIPLAS

More information

Portable filtration unit / 650 CFM (1100 M3H) Portable filtration unit / 1500 CFM (2550 M3H) For 2 arm configuration

Portable filtration unit / 650 CFM (1100 M3H) Portable filtration unit / 1500 CFM (2550 M3H) For 2 arm configuration AQC source capture equipment March 27, 2008 version. Leaflet under construction. More information to come at a later date. Portable filtration unit / 650 CFM (1100 M3H) Portable filtration unit / 1500

More information

Powercut Spare parts list. Edition Valid for serial no. 001-xxx-xxxx, 034-xxx-xxxx

Powercut Spare parts list. Edition Valid for serial no. 001-xxx-xxxx, 034-xxx-xxxx Spare parts list Edition 20111010 Valid for serial no. 001-xxx-xxxx, 034-xxx-xxxx Ordering no. Product 0558 007 636 Powercut 1600, 400V 0558 007 637 Powercut 1600, 400V 25ft 0558 007 237 Powercut 1600,

More information