PROFINET Compatible Serial Transmission Slave Unit M4G/MN4G-T8 Series. PROFINET slave unit added to series!

Transcription

1 PROFINET Compatible Serial Transmission Slave Unit M4G/MN4G-T Series PROFINET slave unit added to series! Select from 3 or -point output, and PNP or NPN. Ideal for predictive maintenance A variety of connection types Counter function Wiring with short total PLC You can count the number of outputs from the PLC to the valve, and monitor the operation cycle of the device connected to the valve and secondary side. It anticipates the maintenance period from the operation cycle and nominal lifespan, and makes preventative maintenance possible. length [Line type] A connection that links devices together in a row. Monitoring of operation time possible Wiring with a high flexibility PLC [Star type] Switching hub A radial connection centered around the switching hub. Air operated valve Wiring with high reliability [Ring type] (MRP) A connection that links devices into a circle. If there is disconnection in one spot, communication in the reverse direction is possible. Disconnection MRP managercompatible PLC Cylinder * This device is compatible with MRP client function. When connecting in a ring, MRP manager function-compatible PLC is necessary. CC-30A

2 M4G/MN4G-T Series Specifications Please view together with the Pneumatic Valves Catalog (No. CB-03SA). Descriptions TEP TEP TEPP TEPP Communication system name PROFINET Power supply Unit side 4 VDC ±0% voltage Valve side 4 VDC +0%, -% Current Unit side 30 ma or less consumption Valve side ma or less (excluding load current) Output NPN output PNP output Output points points 3 points points 3 points LED display Power supply PW, PW (V) Communication L/A IN, L/A OUT, INFO Protection rating IP Individual specifications Metal base manifold Descriptions Standard Max. Internal pilot station No. External pilot Max. number of solenoids M3G*/M4G* M3G*/M4G* M3G*3/M4G*3 Direct mount DIN rail mount Direct mount DIN rail mount Direct mount DIN rail mount stations stations stations stations stations stations TEP *: points TEP *: 3 points Block manifold Descriptions MN3G*/MN4G* MN3G*/MN4G* TEP* TEP* TEP* TEP* Max. Standard wiring stations 4 stations stations stations station No. Double wiring stations stations stations stations Max. number of solenoids points 3 points points 3 points Compatibility Metal base manifold M3/4GA, M3/4GB, M3/4GD, M3/4GE M3/4GA, M3/4GB, M3/4GD, M3/4GE M3/4GA3, M4GB3, M3/4GD3, M4GE3 Block manifold MN3/4GA, MN3/4GB, MN3/4GD, MN3/4GE MN3/4GA, MN3/4GB, MN3/4GD, MN3/4GE

3 M4G/MN4G-T Series How to order How to order Metal base Manifold equipped model [Example] M4GB A Model No. B Solenoid position 0R C C Port size TEP W F H D 0 3 I Voltage H Station No. G Mount Option *Regarding listed model Nos. This catalog only lists model Nos. for serial transmission slave units that have just been added (TEP*). Refer to "Pneumatic Valves" (Catalog No. CB-03SA) for details on the M4G Series, such as specifications and model No. E Terminal/connector pin array [Example of model No.] M4GB0R-C-TEPWHD-0-3 D Serial transmission A Model No. : -port valve/base piping B Solenoid position : -position single C Port size : φ push-in fitting D Serial transmission : Thin PROFINET 3 point (NPN output) E Terminal/connector pin array : Double wiring F Option : With exhaust check valve G Mount : DIN rail mount H Station No. : 0 stations I Voltage : 4VDC Code Content D Serial transmission slave unit (lamp/surge suppressor provided as standard) TEP Thin PROFINET point (NPN output) TEPP TEP TEPP Thin PROFINET point (PNP output) Thin PROFINET 3 point (NPN output) Thin PROFINET 3 point (PNP output) Block manifold equipped model No. [Example] MN4GB A Model No. B Solenoid position 0R C C Port size TEPP E W H F Option 0 Terminal/connector pin array 3 H Voltage G Station No. *Regarding listed model Nos. This catalog only lists model Nos. for serial transmission slave units that have just been added (TEP*). Refer to "Pneumatic Valves" (Catalog No. CB-03SA) for details on the MN4G Series, such as specifications and model No. [Example of model No.] MN4GB0R-C-TEPPWH-0-3 D Serial transmission A Model No. : -port valve/base piping B Solenoid position : -position single C Port size : φ push-in fitting D Serial transmission : Thin PROFINET 3 point (PNP output) E Terminal/connector pin array : Double wiring F Option : With exhaust check valve G Station No. : 0 stations H Voltage : 4 VDC Code Content D Serial transmission slave unit (lamp/surge suppressor provided as standard) TEP Thin PROFINET point (NPN output) TEPP TEP TEPP Thin PROFINET point (PNP output) Thin PROFINET 3 point (NPN output) Thin PROFINET 3 point (PNP output)

4 M4GA-T* Series Reduced wiring manifold; body piping; serial transmission Dimensions M4GA Serial transmission (T ) DIN rail mounting (D) 3. L = (. n) L = (. n) (pitch) Push-in fitting φ., φ4, φ (selection) 7. (manual cover opened) : 3-position 0.3: Double 0.: Single. 3R P R (manual operation position) 0. (manual operation position).9 (manual operation position) Mounting hole 4-φ4.3 Push-in fitting φ., φ4, φ (selection) Rc/ (P), (R), 3(R) port ().: Push-in fitting φ 7: Push-in fitting φ4 3: Push-in fitting φ. Station No L L L M4GA Serial transmission (T ) DIN rail mounting (D); external pilot (K) Mounting hole 4-φ : 3-position 0.3: Double.: Single 4 3. L = (. n) L = (. n) (pitch). / PA Push-in fitting φ., φ4, φ (selection) Pilot air supply port /(PA) port (manual operation position). (manual operation position).9 (manual operation position). Push-in fitting φ., φ4, φ (selection) 7. (manual cover opened) PR P 4PR R - Pilot exhaust port /4(PR) port. 3-Rc/ (P), (R), 3(R) port () 9.: Push-in fitting φ.4: Push-in fitting φ4 4.4: Push-in fitting φ. 3R Station No L L L

5 Dimensions M4GA-T* Series Reduced wiring manifold; body piping; serial transmission M4GA Serial transmission (T ) DIN rail mounting (D) 3. L = (. n) + 9 L = (. n) (pitch) Push-in fitting φ4, φ, φ (selection) Rc/ Mounting hole 4-φ : 3-position.: Double 97.: Single R P R 3..9 (manual operation position) 7.4 (manual operation position) 7.7 (manual operation position) Rc/ Push-in fitting φ4, φ, φ (selection) Rc/4 (P), (R), 3(R) port 0. (Rc/) 7: Push-in fitting φ4, φ, φ common Station No L L L M4GA Serial transmission (T ) DIN rail mounting (D); external pilot (K) 39: 3-position.: Double 97.: Single L = (. n) + 9 L = (. n) (pitch) 3R P R Push-in fitting φ4, φ, φ (selection) Rc/ Mounting hole 4-φ (manual operation position) 7.4 (manual operation position) 7.7 (manual operation position) Rc/ Push-in fitting φ4, φ, φ (selection) (Rc/) 9: Push-in fitting φ4, φ, φ common /4 / PR PA Pilot air supply port /(PA) port.7. 3-Rc/4 (P), (R), 3(R) port Pilot exhaust port /4(PA) port Station No L L L

6 M4GA3-T* Series Reduced wiring manifold; body piping; serial transmission Dimensions M4GA3 Serial transmission (T ) DIN rail mounting (D) 3. L = (. n) L = (. n) (pitch) Push-in fitting φ, φ, φ0 (selection) Rc/4 Mounting hole 4-φ : 3-position 3: Double.: Single A 4 A 4 A B B B R P 3R (manual operation position). (manual operation position) 7. (manual operation position).7 Rc/4 Push-in fitting φ, φ, φ0 (selection)... 3-Rc3/ (P), (R), 3(R) port (Rc/4) 0.4: Push-in fitting φ0 9.9: Push-in fitting φ, φ common Station No L L L M4GA3 Serial transmission (T ) DIN rail mounting (D); external pilot (K) 7.: 3-position 3: Double.: Single L = (. n) L = (. n) (pitch) Push-in fitting φ, φ, φ0 (selection). 3.4 Rc/4 Mounting hole 4-φ4. 7. (manual operation position). (manual operation position) 7. (manual operation position).7 /4 / PR PA Pilot air supply port /(PA) port Rc/4 Push-in fitting φ, φ, φ0 (selection). 3-Rc3/ (P), (R), 3(R) port (Rc/4) 0.3: Push-in fitting φ0 00.: Push-in fitting φ, φ common Pilot exhaust port /4(PR) port Station No L L L

7 M4GB-T* Series Reduced wiring manifold; base piping; serial transmission Dimensions M4GB Serial transmission (T ) DIN rail mounting (D) 3. L = (. n) L = (. n) +.3. (Pitch) Mounting hole 4-φ (manual cover opened) : Single 0.3 : Double.3: 3-position. 3R P R (manual operation position) 0. (manual operation position).9 (manual operation position) Rc/ (P), (R), 3(R)Port 9.9 B 4A B 4A Station No L L L (Pitch) 7. Push-in fitting φ., φ4, φ (selection) Push-in fitting φ., φ4, φ (selection) Serial transmission (T ) DIN rail mounting (D); external pilot (K) 37. Mounting hole 4 - φ : 3-position 0.3: Double.: Single 4 3. L = (. n) L = (. n) (Pitch). 3R P R (manual operation position). (manual operation position).9 (manual operation position). Pilot air supply port /(PA) port 7. (manual cover opened) / PA /4 PR - Pilot exhaust port /4(PR) port Rc/ (P), (R), 3(R) Port 94.3 B 4A B 4A (Pitch) 7. Push-in fitting φ., φ4, φ (selection) (B) port Push-in fitting φ., φ4, φ (selection) Station No L L L

8 M4GB-T* Series Reduced wiring manifold; base piping; serial transmission Dimensions M4GB-C Reduced wiring left side (T ) 3. L = (. n) + 3. L = (. n) (Pitch) Mounting hole 4-φ (manual cover opened) : 3-position 0.3: Double 0.: Single (manual operation position) 0. (manual operation position).9 (manual operation position) Rc/ (P), (R), 3(R) port (pitch) Push-in fitting φ Push-in fitting φ Station No L L L Reduced wiring left side (T ) External pilot (K) 70..3: 3-position 37. Mounting hole 4-φ : Double.: Single 4 3. L = (. n) L = (. n) (Pitch). 7. (manual cover opened) Pilot air supply port / (PA) port (manual operation position). (manual operation position) 7.9 (manual operation position) Pilot exhaust port /4(PR) port 3-Rc/ (P), (R), 3(R) port 3... (pitch) Push-in fitting φ Push-in fitting φ Station No L L L

9 Dimensions M4GB M4GB-T* Series Reduced wiring manifold; base piping; serial transmission Serial transmission (T ) DIN rail mounting (D) 3. L = (. n) + 9 L = (. n) (Pitch) Mounting hole 4-φ : 3-position.: Double 97.: Single R 3R P R 3..9 (manual operation position) 7.4 (manual operation position) (manual operation position) Rc/4 (P), (R), 3(R) Port A/B port size * Dimensions φ4, φ, φ 7 φ0. (*).. (Pitch) Station No L L L Push-in fitting φ4, φ, φ, φ0 (selection) (B) port Push-in fitting φ4, φ, φ, φ0 (selection) 4(A) port Serial transmission (T ) DIN rail mounting (D); external pilot (K) 39: 3-position.: Double 97.: Single L = (. n) + 9 L = (. n) (Pitch) 3R P R Mounting hole 4-φ (manual operation position) 7.4 (manual operation position) 7.7 (manual operation position) / (PA) /4 (PR) Pilot air supply port / (PA) port..7 3-Rc/4 (P), (R), 3(R) Port 0.3. Pilot exhaust port /4(PR) port A/B port size * Dimensions φ4, φ, φ 7 φ0. (*).. (Pitch) 0.3 Push-in fitting φ4, φ, φ, φ0 (selection) (B) port Push-in fitting φ4, φ, φ, φ0 (selection) 4(A) port Station No L L L

10 M4GB3-T* Series Reduced wiring manifold; base piping; serial transmission Dimensions M4GB3 Serial transmission (T ) DIN rail mounting (D) 3. L = (. n) L = (. n) (Pitch) Mounting hole 4-φ : 3-position 3: Double.: Single R P R (manual operation position). (manual operation position) 7. (manual operation position) Rc3/ (P), (R), 3(R) Port 0.4 B 4A (Pitch) Push-in fitting φ, φ, φ0 (selection) (B) port Push-in fitting φ, φ, φ0 (selection) 4(A) port Station No L L L B 4A Serial transmission (T ) DIN rail mounting (D); external pilot (K) 7.: 3-position 3: Double.: Single L = (. n) L = (. n) (Pitch) 3R P R Mounting hole 4-φ (manual operation position). (manual operation position) 7. (manual operation position) Pilot air supply port /(PA) Port Rc3/ (P), (R), 3(R) Port Pilot exhaust port /4(PR) Port B 4A (Pitch) Push-in fitting φ, φ, φ0 (selection) Push-in fitting φ, φ, φ0 (selection) Station No L L L B 4A

11 Dimensions MN4GA Thin serial transmission (T ) MN4GA/-T* Series Reduced wiring block manifold: body piping Note: For the -position single 3-port valve, either port A or port B is a plug. In addition, the two 3-port valves integrated has the same dimensions as the double model. = L + (40 up).: 3-position 0.: Double 93.: Single.4 (manual operation position) (manual operation position) 4 (manual operation position) L3 = -. L = (0. n) + ( m) + (0. l) n: No. of valve block stations m: supply and exhaust blocks l: partition blocks (Push-in fitting φ., φ4, φ) 3. () 73.3 (manual cover opened) Push-in fitting bore size * Dimensions φ.. φ4 9. φ 70.3 φ/" 9. φ/3" 9. MN4GA Thin serial transmission (T ) Push-in fitting bore size * dimension φ4 φ 9.7 φ φ/4" 9. φ/" 9.9 Female thread * dimension bore size Rc/ 7. /NPT 77. G/ : 3-position : Double : Single * 7. (manual operation position) * (manual operation position) * 7 (manual operation position) 3.3 () Serial transmission slave unit OPP7 Series Slave unit block Valve block = L + (40 up) L3 = -. L = ( n) + ( m) + (0. l) +.9 n: No. of valve block stations m: supply and exhaust blocks l: partition blocks Rc/ Serial transmission slave unit OPP7 Series Slave unit block Valve block Masking plate Supply and exhaust block Rc/ Masking plate Supply and exhaust block Push-in fitting φ., φ4, φ (selection) Push-in fitting φ., φ4, φ (selection) Push-in fitting φ, φ (selection) (P) port End block R (Push-in fitting φ). (Push-in fitting φ0) 9 9. Push-in fitting φ, φ (selection) 3/(R) port Push-in fitting φ4, φ, φ (selection) Push-in fitting φ4, φ, φ (selection) Push-in fitting φ, φ0 (selection) (P) port.3 (Push-in fitting φ). (Push-in fitting φ) 7. (Push-in fitting φ., φ4, φ) 7. () φ. barbed fitting (CF) 7.3. (Push-in fitting φ4, φ, φ) (Rc/) 34 (Push-in fitting φ4, φ, φ) 33. (Rc/) End block R Push-in fitting φ, φ0 (selection) 3/ (R) port 74. 0

12 MN4GB/-T* Series Reduced wiring block manifold; base piping Dimensions MN4GB Thin serial transmission (T ) Note: The two 3-port valves integrated has the same dimensions as the double type. = L + (40 up) L3 = -. L = (0. n) + ( m) + (0. l) n: No. of valve block stations m: supply and exhaust blocks l: partition blocks (manual cover opened) 3.3.: 3-position 0.: Double 97.9 (push-in fitting φ4) 99. (push-in fitting φ): Single (manual operation position) MN4GB Thin serial transmission (T ) 39: 3-position : Double 9: Single 7. (manual operation position) 7 (manual operation position) Serial transmission slave unit OPP7 Series 4. (manual operation position) 4 (manual operation position) 43. Serial transmission slave unit OPP7 Series 4..9 Slave unit block Valve block Push-in fitting φ., φ4, φ (selection) (B) port Push-in fitting φ., φ4, φ (selection) 4(A) port. 7 (manual operation position) = L + (40 up) L3 = (Push-in fitting φ). (Push-in fitting φ0) Masking plate Supply and exhaust block L = ( n) + ( m) + (0. l) +.9 n: No. of valve block stations m: supply and exhaust blocks l: partition blocks 3 0. Masking plate Push-in fitting φ, φ (selection) (P) Port End block R.4 Push-in fitting φ, φ (selection) 3/(R) port.3 (Push-in fitting φ). (Push-in fitting φ) Push-in fitting φ, φ0 (selection) (P) Port Slave unit block Valve block Push-in fitting φ4, φ, φ (selection) (B) port Push-in fitting φ4, φ, φ (selection) 4(A) port Supply and exhaust block End block R Push-in fitting φ, φ0 (selection) 3/(R) port

13 Dimensions M4GD M4GD-T* Series Reduced wiring manifold; body piping; serial transmission * For the -position single 3-port valve, either port A or port B is a plug. Serial transmission (T) DIN rail mounting (D) L = (. n) L = (. n) +.3. (pitch) Push-in fitting φ4, φ (selection) 7. (manual cover opened) : 3-position 0.3: Double 0.: Single (manual operation position) 0. (manual operation position).9 (manual operation position) Mounting hole 4-φ Rc/ (P), (R), 3(R) port ().9: Push-in fitting φ 4.7: Push-in fitting φ4 Push-in fitting φ4, φ (selection) Station No L L L

14 M4GD-T* Series Reduced wiring manifold; body piping; serial transmission Dimensions M4GD Serial transmission (T) DIN rail mounting (D) * For the -position single 3-port valve, either port A or port B is a plug L = (. n) + 9 L = (. n) +. (pitch) Push-in fitting φ4, φ, φ (selection) Rc/ Mounting hole 4-φ : Double 39: 3-position 97.: Single.. 4. Push-in fitting φ, φ, φ0 (selection) 7.: Push-in fitting φ4, φ, φ common (manual operation position) 7.4 (manual operation position) 7.7 (manual operation position) Rc/ (Rc/). Station No L L L

15 Dimensions M4GD3 Serial transmission (T) DIN rail mounting (D) M4GD3-T* Series Reduced wiring manifold; body piping; serial transmission * For the -position single 3-port valve, either port A or port B is a plug L = (. n) L = (. n) +.9. (pitch) Push-in fitting φ, φ, φ0 (selection) Rc/ Mounting hole 4-φ4. 7.: 3-position 3: Double.: Single (manual operation position) Rc/4 Push-in fitting φ, φ, φ0 (selection) 97.: Push-in fitting φ0 93.3: Push-in fitting φ, φ common 0.4. (manual operation position) 7. (manual operation position) (Rc/4) Rc3/ (P), (R), 3(R) port Station No L L L

16 M4GE-T* Series Reduced wiring manifold; base piping; serial transmission Dimensions M4GE Serial transmission (T) DIN rail mounting (D) * The two 3-port valves integrated has the same dimensions as the double type. 3.3 L = (. x n) L = (. n) : (manual cover opened) 7.9. (Pitch) 3.7 Mounting hole 4-φ : 3-position 0.3: Double 0.: Single (manual operation position) 0. (manual operation position).9 (manual operation position) Rc/ (P), (R), 3(R) port (Pitch) 7. Push-in fitting φ4, φ (selection) Push-in fitting φ4, φ (selection) Station No L L L

17 Dimensions M4GE-T* Series Reduced wiring manifold; base piping; serial transmission M4GE Serial transmission (T) DIN rail mounting (D) * The two 3-port valves integrated has the same dimensions as the double type. 3. L = (. n) + 9 L = (. n) (Pitch) Mounting hole 4-φ : Double 39: 3-position : Single 3..9 (manual operation position) (manual operation position) 7.7 (manual operation position) Rc/4 (P), (R), 3(R) port 7.. (Pitch) Push-in fitting φ4, φ, φ (selection) Push-in fitting φ4, φ, φ (selection) Station No L L L

18 M4GE3-T* Series Reduced wiring manifold; base piping; serial transmission Dimensions M4GE3 Serial transmission (T) DIN rail mounting (D) 3..9 L = (. n) L = (. n) +.9. (Pitch) Mounting hole 4-φ4. 7.: 3-position 3: Double.: Single (manual operation position). (manual operation position) 7. (manual operation position) Rc3/ (P), (R), 3(R) port (Pitch) Push-in fitting φ, φ, φ0 (selection) Push-in fitting φ, φ, φ0 (selection) Station No L L L

19 Dimensions MN4GD Serial transmission (T ) = L + (40 up) L = (0. n) + ( m) + (0. l) n: No. of valve block stations m: supply and exhaust blocks l: partition blocks MN4GD/-T* Series Reduced wiring block manifold; body piping *: For the -position single 3-port valve, either port A or port B is a plug. In addition, the two 3-port valves integrated has the same dimensions as the double model (manual cover opened).: 3-position 0.: Double 93.: Single.4 (manual operation position) (manual operation position) 4 (manual operation position) Serial transmission slave unit OPP7 Series Push-in fitting φ4, φ (selection) Push-in fitting φ4, φ (selection) Masking plate.3 (Push-in fitting φ). (Push-in fitting φ) Push-in fitting φ, φ (selection) (P) Port MN4GD Serial transmission (T ) 4. Slave unit block Valve block Supply and exhaust block (). (Push-in fitting φ) 7. (Push-in fitting φ4) End block R Push-in fitting φ, φ (selection) 3/(R) port = L + (40 up) L = ( n) + ( m) + (0. l) +.9 n: No. of valve block stations m: supply and exhaust blocks l: partition blocks : 3-position : Double 09.: Single 7. (manual operation position) 7 (manual operation position) 7 (manual operation position) Push-in fitting φ4, φ, φ (selection) Push-in fitting φ4, φ, φ (selection) Serial transmission slave unit OPP7 Series Masking plate 4. Rc/ Rc/.4 (Push-in fitting φ). (Push-in fitting φ0) Push-in fitting φ, φ0 (selection) (P) port (Rc/). (Push-in fitting φ4, φ, φ common) Slave unit block Valve block Supply and exhaust block End block R Push-in fitting φ, φ0 (selection) 3/(R) port

20 MN4GE/-T* Series Reduced wiring block manifold; base piping Dimensions MN4GE Thin serial transmission (T ) *: The two 3-port valves integrated has the same dimensions as the double type. = L + (40 up) L = (0. n) + ( m) + (0. l) n: No. of valve block stations m: supply and exhaust blocks l: partition blocks (manual cover opened).: 3-position 0.: Double 97.9 (Push-in fitting φ4) 99. (Push-in fitting φ): Single.4 (manual operation position) (manual operation position) 4 (manual operation position) Serial transmission slave unit OPP7 Series Masking plate Push-in fitting φ, φ (selection) (P) Port (Push-in fitting φ). (Push-in fitting φ) MN4GE Thin serial transmission (T ) Slave unit block Valve block Push-in fitting φ4, φ (selection) (B) port Push-in fitting φ4, φ (selection) 4(A) port Supply and exhaust block End block R Push-in fitting φ, φ (selection) 3/(R) port = L + (40 up) L = ( n) + ( m) + (0. l) +.9 n: No. of valve block stations m: supply and exhaust blocks l: partition blocks : 3-position : Double 9: Single 7. (manual operation position) 7 (manual operation position) 7 (manual operation position) Serial transmission slave unit OPP7 Series Masking plate Push-in fitting φ, φ0 (selection) (P) Port 4..4 (Push-in fitting φ). (Push-in fitting φ0) Slave unit block Valve block Push-in fitting φ4, φ, φ (selection) (B) port Supply and exhaust block Push-in fitting φ4, φ, φ (selection) 4(A) port End block R Push-in fitting φ, φ0 (selection) 3/(R) port

21 Technical data M4G/MN4G-T* Series Technical data Slave unit wiring Wiring to the power supply socket Connectors for the power supply are attached with the product. However, connectors fitting the slave unit side connectors listed below can be used. DMC,/-GF-3,-LRPTHRR44 4-pole connector Manufactured by PHOENIX CONTACT GmbH & Co. KG LED display Wiring Slave unit side RJ4 -port Communication plug (not attached) RUN ERR L/A IN L/A OUT INFO PW PW(V) A B C D E F 0 A B C D E F 0 OUT NETWORK IN OUT IN Next unit Front unit UNIT VALVE 4V 0V 4V 0V Power supply socket [Slave unit side] 4-pole socket (male) DMC,/-GF-3,LRPTHR Valve power supply: +4 V Unit power supply: +4 V Power supply plug (attachment) 4-pole plug (female) DFMC,/-STF-3, Compatible wire diameter: 0. to mm to 4AWG Allowable current: A Valve power supply: +4 V Valve power supply: 0 V Unit power supply: +4 V Unit power supply: 0 V Unit power supply: 0 V Valve power supply: 0 V LED display description LED Name Display description () RUN Connection status of PROFINET is indicated by the LED state (ON/blinking) () ERR Abnormal connection status of PROFINET is indicated by the LED state (ON/blinking) L/A (3) IN Status of the Ethernet port (IN side) is indicated by the LED state (ON/blinking) L/A (4) OUT Status of the Ethernet port (OUT side) is indicated by the LED state (ON/blinking) () INFO Status of the slave unit is indicated by the LED state (ON/blinking) () PW Indicates the power status of the unit power supply. Lit in green when powered ON (7) PW(V) Indicates the power status of the valve power supply. Lit in green when powered ON (Cannot be monitored when the unit power is not turned ON) Communication plug pin array Port Pin Signal name Function TD+ Transmitted data, positive TD Transmitted data, negative 3 RD+ Received data, positive IN/ 4 Vacant Vacant OUT Vacant Vacant RD Received data, negative 7 Vacant Vacant Vacant Vacant

22 M4G Serial transmission thin A B M4G D E -T Manifold specifications sheet Contact Slip No. Manifold model No. A B D E Quantity set(s) Delivery date / Order No. Date issued / / Company Contact Order No. M G 0R Solenoid valve model No. 4G 9R- 4G 9R- 4G 9R- 4G 9R- 4G 9R- 3G 9R- 3G 9R- Masking plate 4 GR-MP (S)- Masking plate 4 GR-MP (D)- Air supply spacer 4 GR-P- In-stop valve spacer 4 GR-IS Exhaust spacer 4GR-R- Mounting Rail Solenoid valve types = Fitting CX Valve installation position A B Attached Part TEP PROFINET NPN points TEP 3 points TEPP PNP points TEPP 3 points PG-P-B * GWP-B Blanking plug GWP4-B GWP-B *3 Thread plug 4GR-P * Write an integer multiple of.. Push-in fitting tube remover (attached as standard) Not required (check the box) *M4GB C does not have a tube removal tool attached. *: Supports only M4GA, B *3: Supports only M4GB Installation position SLW-S Silencer SLW-A Wiring specifications sheet (Not required for standard wiring/double wiring. Complete these specifications when specifying the wiring order and additional cables) Connector pin No. TEP* Solenoid position Port size Serial transmission Terminal/connector pin array Option Mount type Station No. Voltage 9 Qty.

23 M4G Serial transmission thin A B M4G D E -T Manifold specifications sheet Contact Slip No. Manifold model No. A B D E M G 0R G 9R- 4G 9R- 4G 9R- 4G 9R- 4G 9R- 3G 9R- 3G 9R- Masking plate 4GR-MP (S)- Masking plate 4GR-MP (D)- Air supply spacer 4GR-P- In-stop valve spacer 4GR-IS Exhaust spacer 4GR-R- Pilot check valve spacer 4GR-PC-M* Mounting Rail Solenoid valve types Solenoid valve model No. = * Write an integer multiple of.. * Supports only M4GB Attached Part TEP PROFINET NPN points TEP 3 points TEPP PNP points TEPP 3 points Quantity set(s) Delivery date / Blanking plug Order No. Thread plug 4GR-0P Date issued / / Company Contact Order No. Fitting CX Valve installation position A B GWP4-B GWP-B 3 4 GWP-B GWP0-B* 7 Installation position SLW-S Silencer SLW-A Wiring specifications sheet (Not required for standard wiring/double wiring. Complete these specifications when specifying the wiring order and additional cables) Connector pin No. TEP* Solenoid position Port size Serial transmission Terminal/connector pin array Option Mount type Station No. Voltage 9 Qty.

24 M4G3 Serial transmission thin A B M4G D E 3-T Manifold specifications sheet Contact Slip No. Manifold model No. A B D E Quantity set(s) Delivery date / Order No. Date issued / / Company Contact Order No. M G 3 0R Solenoid valve types Solenoid valve model No. 4G 3 9R- 4G 3 9R- 4G 3 9R- 4G 3 9R- 4G 3 9R- 3GA3 9R- Port size Option Mount type Station No. Solenoid position Serial transmission Terminal/connector pin array Fitting CX Valve installation position A B Voltage Qty. 3GA3 9R- Masking plate 4G3R-MP (S)- Masking plate 4G3R-MP (D)- Air supply spacer 4G3R-P- In-stop valve spacer 4G3R-IS Exhaust spacer 4G3R-R- Mounting Rail = * Write an integer multiple of.. Attached Part Blanking plug Thread plug Silencer GWP-B GWP-B GWP0-B 4G3R-0P SLW-0A SLW-0L 3 Wiring specifications sheet (Not required for standard wiring/double wiring. Complete these specifications when specifying the wiring order and additional cables) Connector pin No. TEP* TEP PROFINET NPN points TEP 3 points TEPP PNP points TEPP 3 points Installation position

25 MN4G Block manifold specifications sheet Contact Slip No. Manifold model No. MN G A B DE Quantity set(s) Delivery date / Order No. 0R Electrical connections A Model No. B Solenoid C Port size D E Terminal/connector pin array F (Reduced wiring Option position connection) (Note: Fill in for reduced wiring.) Select a model No. from the block components listed in "Pneumatic valves" (No. CB-03SA) when inputting. 3 Date issued / / Company Contact Order No. G Station No. H Voltage Layout position Part name Model No Qty. Wiring block N4GR-TEP With solenoid valve Valve block N4GB 0R- N4GB 0R- N4GB 0R- N4GB 0R- N4GB 0R- N4GB 0R- N3GB 0R- N3GB 0R- With masking plate Valve block N4GBR-MPS- N4GBR-MPD- Air supply spacer 4GR-P- 4GR-P- Exhaust spacer 4GR-R- In-stop valve spacer 4GR-IS* Supply and exhaust block N4GR-Q - N4GR-Q - N4GR-Q - Partition block N4GR-S N4GR-S N4GR-S End block N4GR-E N4GR-E Mounting rail = * Write an integer multiple of.. Blanking plug Silencer Tag plate (attachment) GWP4-B GWP-B GWP-B SLW-H SLW-H B B Push-in fitting tube remover (attached as standard) Not required (check the box) Attached part * Supports only MN4GA, B 4

26 MN4G Block manifold specifications sheet Contact Slip No. Manifold model No. MN G A B DE Quantity set(s) Delivery date / Order No. 0R Electrical connections A Model No. B Solenoid C Port size D E Terminal/connector pin array F (Reduced wiring Option position connection) (Note: Fill in for reduced wiring.) Select a model No. from the block components listed in "Pneumatic valves" (No. CB-03SA) when inputting. 3 G Station No. Date issued / / Company Contact Order No. H Voltage Layout position Part name Model No Qty. Wiring block N4GR-TEP With solenoid valve Valve block N4GB 0R- N4GB 0R- N4GB 0R- N4GB 0R- N4GB 0R- N4GB 0R- N3GB 0R- N3GB 0R- With masking plate Valve block N4GBR-MPS- N4GBR-MPD- Air supply spacer 4GR-P- 4GR-P- Exhaust spacer 4GR-R- In-stop valve spacer 4GR-IS * Spacer Pilot check valve 4GR-PC-M * Supply and exhaust block N4GR-Q - N4GR-Q - N4GR-Q - Partition block N4GR-S N4GR-S N4GR-S End block N4GR-E N4GR-E Mounting rail = * Write an integer multiple of.. Blanking plug Silencer Tag plate (attachment) GWP4-B GWP-B SLW-H B GWP-B GWP0-B SLW-H0 Attached part *: Supports only MN4GA, B *: Supports only MN4GB

27 Serial transmission (TEP*) wiring specifications sheet * Fill in and attach to the manifold specifications sheet for anything other than the standard wiring or double wiring. (Available as a custom order) * Not required with standard wiring/double wiring. TEP TEP TEPP TEPP Serial transmission PROFINET NPN PNP points 3 points points 3 points Connector pin No. Valve No. T*

28 400 Winnetka Avenue, Rolling Meadows, IL 000, USA PHONE FAX Cerrada la Noria No. 0 Int. A-0, Querétaro Park II, Parque Industrial Querétaro, Santa Rosa Jáuregui, Querétaro, C.P. 7, México PHONE Beechavenue A, 9 RB Schiphol-Rijk, The Netherlands PHONE Beechavenue A, 9 RB Schiphol-Rijk, The Netherlands PHONE Lot No.,Jalan Modal 3/, Seksyen 3, Kawasan MIEL, Fasa, Shah Alam,Selangor Darul Ehsan, Malaysia PHONE FAX Suwan Tower, / Soi Saladaeng, North Sathorn Road, Kwaeng Silom, Khet Bangrak, Bangkok 000, Thailand PHONE FAX No.33 Tannery Lane #04-0 Hoesteel Industrial Building, Singapore 34779, Singapore PHONE FAX No.33 Tannery Lane #04-0 Hoesteel Industrial Building, Singapore 34779, Singapore PHONE FAX +-40 Unit No. 07, th Floor, Welldone Tech Park, Sector 4, Sohna Road, Gurgaon-, Haryana, India PHONE No. /B, nd Floor, Museum Terraces Apartment, No. 9, Museum Road, Bangalore-000, Karnataka, India PHONE /7009 FAX Menara Bidakara, th Floor, Jl. Jend. Gatot Subroto Kav. 7-73, Pancoran, Jakarta 0, Indonesia PHONE FAX th Floor, CMC Tower, Duy Tan Street, Cau Giay District, Hanoi, Vietnam PHONE FAX F-3, No. 7, Sec. 3, New Taipei Blvd., Xinzhuang Dist., New Taipei City 4, Taiwan PHONE FAX Room 0, th Floor, Yuanzhongkeyan Building, No. 90 Hongmei Road, Xinhui District, Shanghai 033, China PHONE FAX rd Floor, 44, Sinsu-ro, Mapo-gu, Seoul -, Korea PHONE FAX The goods and/or their replicas, the technology and/or software found in this catalog are subject to complementary export regulations by Foreign Exchange and Foreign Trade Law of Japan. If the goods and/or their replicas, the technology and/or software found in this catalog are to be exported, law requires that the exporter makes sure that they will never be used for the development and/or manufacture of weapons for mass destruction. Specifications are subject to change without notice. CKD Corporation All copy rights reserved...gzz.