with power supply or Automatic temperature controller

Transcription

1 Dear, Please check the Details TEC : 1399/- SET- 3399/- or 3399/ TEC :1699/- SET-3699/- or 3699/ TEC :1999/ with power supply or Automatic temperature controller /- 5900/- 6900/ /- 6200/- 7200/- 9200/- TEG SP TEG All products are with 1 year warranty (not for burnt and damaged peaces) Perfect for: CPU Cooling, video card, NANO Reef, laser diode, CCD camera, picnic cooler, beverage cooler. Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor technologies and electronic assembly techniques. Semiconductor coolers are solid state, vibration free, noise-free heat pumps. They are modular devices, So are simple to install and operate. Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts. These devices must be used in conjunction with a heat sink to avoid burned. With Bismuth Telluride thermoelectric materials For * Model: TEC * Model: TEC * Operates from 0~15.2V DC and 0~6A * Max power consumption: 91.2 Watts For * Model: TEC * Operates from 0~15.2V DC and 0~15A * Max power consumption: 231Wat s

2 For * Model: TEC * Model: TEC * Operates from 0~15.2V DC and 0~9A * Max power consumption: 136.8Watt s Thermoelectric Generator TEG Rs 3999/- (12v Boaster board also Available) Model : TEG UOC: Volts : 12.1 Rin Ohms: 10.1 RLoad Ohms : 10 P Load Watts : 3.6 U Load Volts : 6 Watts/Degree Centigrade : 1W/'C Hot Side: 40*40 Cold Side: 40*40 Height: 3.6 operating Temperature or working temperature is 235 Celsius Thermoelectric Generator SP ( Volts) Rs1999/- (5v Boaster board also available) Model : TEG1-SP Temperature (degrees) Open circuit voltage (V) Current (MA) Export version: SP is used at temperatures between -40 degrees to 120 degrees Hot Side: 40*40 Cold Side: 40*40 Height: 3.6 Heatsinks Hydraumatic Features: Extend CPU life and reliable Protect your valuable data by keeping your CPU cool Anti-Dust and easy, Simple installation Reduce CPU Temperature Power saving design Specification: Connector:3 Pin Voltage: DC 12V Rated Current:0.18±0.02 Amp Bearing: Hydraumatic Fan Speed:2200 RPM±10% Noise Level:20±3 Dba Air Flow: 35 CFM Life:30000 hours Dimension: 114x84x73mm Weight:242 g

3 All Setts are with 2Fans, TEC,Grease & Spares (Pictures are only for reference slight Design may Varies) Product features: 1.2 6mm heat pipes with exclusive HDT technology, combined with radiation fins radiating effect is more ideal for large area; 2.staggered fins wind gathering design, effectively strengthen the pressure t o upgrade the overall thermal performance while improving the overall fashion; 3.8cm aircraft head cooling fan, large volume and more low noise; 4.Thesingle fastener design, fully compatible with the thermal design of heat pipe mainstream high-end Northbridge; 5.platform fastener design, fully compatible with AMD, INTEL platform. Specifications: Dimensions: 113 (L) X80 (W) x113 (H) mm Weight: 304g Bearing Type: Hydraumatic Rated Voltage: 12 Vx2 Rated Current: Amp (MAX) 0.18x2 Silent bottom three copper heat pipe tower sideblown 4-pin PWM motherboard thermostat control, mute cooling effect is not a problem Basic parameters Supported platforms: 775 Overall dimensions: mm (height) Weight: 550g Fan Dimensions: mm ( General may at any time replace) Bearing Type: Hydraulic transfer band range : RPM ± 5% power supply jack: Standard Motherboard 4Pin the border length: 20CM

4 230 Volts 50Hz 100w Power Generator 3999/- Wind is in nature inexhaustible energy, but also not pollute the environment is one of the energy. Changing the wind energy to power energy is used in industry production and normal life,which is human ideal energy acquisition modes. This Wind Turbine Generator includes a high efficiency motor to get the most from the turbine.this turbine comes with one of the best warranties in the industry.this wind generator turbine is small yet versatile turbine and can produce up to 100 Watts Max. It features a special coating that protects the generator, making it suitable for locations. The turbine begins to supply power in wind speeds as low as 2.5m/s 270X120X30(MM) 240 Aluminum radiator water Cooling Block for CPU Heatsink Cooler Product specifications: 270 (L) x 120 (W) x 30 (H) MM Weight: 450 G Radiating fin density: 82% off / inch Flat tube number: 12 Sealing technology: vacuum aluminum brazing Surface treatment: black green paint Mouth: 9.5 (D) MM Joint: disposable stainless steel hoop Water Cooling 80 Radiator Set Water cooling radiator Description: 1. Aluminium radiator 2. Al barb OD 8.5mm 3. Dimensions: 95(L) x 80(W) x 30(H) mm 4. N.W: 230g with fan(no fan cover)

5 SET MEANS HYDRO HEATSINK+TEC+COPPERPLATE+THERMAL GREASE COMPOUND Thanks & Regards BS.VEMAVARAPU , ,