Cyclone PARTS LIST Advance Model: /09 FORM NO

Transcription

1 PARTS LIST Advance Model: /09

2

3 09-3 TABLE OF CONTENTS 1 DESCRIPTION PAGE Cyclone Subsystem Drain Subsystem Electrical Subsystem Instrument Enclosure Sub Assembly Voltage Meter Enclosure Sub Assembly Filtration Subsystem Finishing Subsystem Door and Siding Sub Assembly Rear Axle Sub Assembly Joystick Enclosure Sub Assembly Foot Brake Sub Assembly Front Axle Sub Assembly Fuel Subsystem Hydraulic Subsystem Hydraulic Subsystem Hydraulic Tank Sub Assembly Hydraulic Pressure Relief Valve Sub Assy Hydraulic Lifting Sub Assembly Power Unit Subsystem Pressurized Water & Heating Subsystem Water Supply & Return Subsystem Wiring Diagram Hydraulic Schematic WHEN ORDERING PARTS * Use the part numbers from the Ref. No. columns in this parts list. * Specify the model and serial number of the machine. * Use the space below to record the model and serial number for future reference. Model Serial No.

4 2 CYCLONE SUBSYSTEM 09-3

5 09-3 CYCLONE SUBSYSTEM 3 Item Ref. No. Qty Description Housing Tube, 2.5 Od X.065 W, 304stst, Port Extension W/ Pins Bolt, 3/8-16 X 1-1/2, Fh, G8, Np Nut, 3/8-16, Lock, Nylon, Zinc Washer, 3/8, Flat, Hardened Sae, Zinc Brush,Slotted & Rolled Box-Channel Out Bolt, 1/4-20 X 3/4, Sh, G8, Np /4 Flat A&N Ss Washer Groove Pulley, Spindle, Driven, 2bk120h Bushing, Spindle Pulley Groove Pulley, Hydraulic Motor Bushing P1 7/8 Bore Belt, Bx47, Spindle Drive Belt, Bx44, Cyclone Return Pump Drive Front Axle Rear Axle Bolt, 3/8-16 X 1-1/2, Cs, G8, Zinc Cyclone Caster Wheel Assy Top Bearing, Ball Bolt, 7/16-14 X 2, Cap, G8, Zinc Washer, 7/16, Flat, Hardened Sae, Zinc Nut, 7/16-14, Lock, Nylon, Zinc Top Bearing Plate Bolt, 3/8-16 X 1-1/4, Cap, G8, Zinc Collar Shaft 3/8, 1/ /4-20 X 3 All-Thread Washer, 1/4, Flat, Hardened, Sae, Zinc Washer, 1/4, Lock, Zinc Angle 1 X 1-1/2 X 1-1/2 W Belt Tensioner Adjustment Bottom Bearing, Roller Bolt, 9/16-12 X 2, Fh, G8, Np- Bottom Bearing Washer, 9/16, Flat, A+N, S/S Nut, 9/16-12, Lock, Nylon, Zinc Spray Bar, 10k Psi, 1-Port Nozzle 1/4 Meg 1503 Steel, Ceramic Insert Blade Bar, St Blade Cyclone Steel B O Lt, 5/16-18 X 1, Cap, G8, Z Bolt, 5/16-18 X 1, Sh, G8, Np Washer, 5/16, Flat, Hardened Sae, Zinc Nut, 5/16-18, Lock, Nylon, Zinc Nut, 3/4-16, Jam, Zinc, Nut, 3/4-16, Jam, Zinc, Blue O-Ring, Spray Bar, Viton Washer, 3/4, Flat, A+N, S/S Spindle 2 X 1-1/ Assy Rotating Union Assy, 5k, Revision A Slinger Rotating Union- 2.5 Od, Copper /8 Mpt X #6mjic, Channel, 5, 40 Cyclone, Right Frame Rail Channel, 5, 40 Cyclone, Left Frame Rail Bolt, 3/4-10 X 2, Cap, G8 Zinc Washer, 3/4, Flat, Hardened Sae, Zinc Nut, 3/4-10, Lock, Nylon, Zinc Front Port Tube Rear Port Tube Disk Hub Standard Disk Bolt, 5/16-18 X 1, Sh, G8, Np Cyclone Fastening Bracket Sub-Assembly Mount / Tab, Bracket, Cyclone Fastening, Lp Bolt, 3/4-10 X 2 L, Cap, Grade 8, Np Cyclone Fastening Plate Sub-Assembly Plate, 1/4, Cyclone Fastening, Lp4500, Steel Mount / Tab, Bracket, Cyclone Fastening, Lp Clevis Pins, 3/4 Id X 2 L, Ss Cotter Pin, Zinc Ring, Cyclone Lifting, Threaded, Lp4500 Item Ref. No. Qty Description Idler Pulley, Belt Tensioner Shaft Tightener, Belt Tensioner Nut, 3/4-10, Jam, Lock, Nylon, Zinc Plate, 3/8 Steel Belt Tensioner Mount Belt Tensioner Spacer 2.50 O.D. X 1-7/ Bolt, 1/2-13 X 4 L, Fh Socket, G8, Np Washer, 1/2, Flat, Hardened Sae, Zinc Nut, 1/2-13, Lock, Nylon, Zinc /4-20 X 6 All-Thread Bolt, 3/8-16 X 1-1/2, Fh, G8, Np Tensioner Adjustment Angle, 1 W Cyclone Hydraulic Motor Sub-Assy Cyclone Hydraulic Motor Fitting, 90, 1 Msae X #12mjic, Steel Hydraulic Motor Mounting Plate Bolt, 3/8-16 X 1-3/4, Cap, G8, Zinc Washer, 3/8, Lock, Zinc Nut, 3/8-16, Hex, G8, Zinc Curb-Cleaner Sub-Assy Curb-Cleaner Plate Nipple, 1/4id X 6 L, Sch80, Steel Fitting, 45, 1/4 Fpt X 1/4 Fpt, Steel Fitting, 90, 1/4 Fpt X #6mjic, Steel Nozzle 1/4 Meg 4008 Steel Connecting Rod, 3.50 L Sub-Assy Connecting Rod 3/4 X 3-1/ Rod-End, 3/4-16, Right-Hand Thread Rod-End, 3/4-16, Left-Hand Thread Nut, Jam, 3/4-16, Rh, Zinc Nut, Jam, 3/4-16, Lh, Zinc Connecting Rod, L Sub-Assy Connecting Rod 3/4 X 10-1/ Rod-End, 3/4-16, Right-Hand Thread Nut, Jam, 3/4-16, Rh, Zinc Rod-End, 3/4-16, Left-Hand Thread Nut, Jam, 3/4-16, Lh, Zinc Lifting Cable Sub-Assy- 7 Ol Cable, Lifting, Cyclone, 7 Ol Nut, Eye, Lifting, 3/8-16, Forged, Galv., 1 Id Lifting Cable Sub-Assy- 16 Ol Cable, Lifting, Cyclone, 16 Ol Nut, Eye, Lifting, 3/8-16, Forged, Galv., 1 Id Return Tank Sub Assembly Return Tank Without Basket, Ss Return Tank Basket Sub-Assy Return Tank Basket, Perf. Ss Stabalizer, Cyclone Tank, Lp Fitting, St, 1-1/4 King Nipple, Ss Fitting, St, 1/4 Id Half-Coupler, Ss Fitting, St, 1/4 Pt X 1/4 Id Barb, Brass Fastening Latch, Cyclone Return Tank Lid, Ss Tank-Lid Leakage Seal Bolt, 8-32 X 3/8, Bh, Cs, Ss Id Hose X T-Bolt Clamp Return Pump Sub Assy Return Pump Fitting, 90, 1 Mpt X 1-1/4 Id Barb, Steel Fitting, 45, 1/4 Mpt X 3/8 Id Barb, Brass Fitting, 90, 1/8 Mpt X 3/8 Id Barb. Brass Groove Pulley, Return Pump Driven Fitting, 90, 1/8 Mpt X 1/8 Mpt, Steel Hose-Cut, 3/8 Id X 14 L, Breather, Cyclone Return Pump Bolt, 1/4-20 X 1-1/2, Cap, G8, Zinc Washer, 1/4, Flat, Hardened, Sae, Zinc Washer, 1/4, Lock, Zinc Fitting, ST 1/8 MPT x 1/4 ID Barb SS

6 4 DRAIN SUBSYSTEM 09-3 NOTES: A - WATER TANKS & FITTINGS ARE IDENTIFIED IN THE WATER SUPPLY & RETURN SUB-ASSEMBLY DRAWING B - FILTER HOUSING & FITTINGS ARE IDENTIFIED IN THE FILTRATION SUB-ASSEMBLY DRAWING C - REAR BUMPER IS IDENTIFIED IN STRUCTURAL SUB-ASSEMBLY DRAWING

7 09-3 DRAIN SUBSYSTEM 5 Item Ref. No. Qty Description Water / Reclaim Tank Valve Assy, 1.0 Id Fitting, St, F Cam Lock Cap 1-1/2 Alum Fitting, St, M Cam Lock 1-1/2 X 1-1/2 Fpt Alum Fitting, St, 1 Id X 3-1/2 L Nipple, Sch40, Blk Valve, 1 Id, Gate, Brass Fitting, St, 1 Mpt X 1 Id Barb, Brass Clamp, Worm-Drive, # Hose Assy, Drain, Clean Water Tanks, 70 L Hose, Drain, Red, Filter Housings, 70 L X 1 Id Hose Assy, Drain, Clean Water Tanks, 72 L Hose, Drain, Green, Fresh Water Tank, 72 L X 1 Id Water / Reclaim Tank Valve Assy, 1.5 Id Fitting F Cam Lock Cap 1-1/2 Alum Fitting M Cam Lock 1-1/2 X 1-1/2 Fpt Alum Fitting, St, 1-1/2 Id X 3-1/2 L Nipple, Sch40, Blk Valve, 1-1/2 Id, Gate, Brass Fitting,St, 1-1/2 Mpt X 1-1/2 Id Barb, Steel * Drain Hose Assy s Clamp, Hose, # Hose Assy, Drain, Reclaim Tank #1, 45 L Hose, Drain, Green, Reclaim Tank #1, 45 L X 1-1/2 Id Hose Assy, Drain, Reclaim Tank #2, 44 L Hose, Drain, Green, Reclaim Tank #2, 44 L X 1-1/2 Id Hose Assy, Drain, Reclaim Tank #3, 46 L Hose, Drain, Green, Reclaim Tank #3, 46 L X 1-1/2 Id

8 6 ELECTRICAL SUBSYSTEM 09-3

9 09-3 ELECTRICAL SUBSYSTEM 7 Item Ref. No. Qty Description Instrument Enclosure Subassembly Exterior Light Subassembly Headlight-12V Connector Pigtail-headlight halogen Battery Light-Beacon Amber Screw-1/4-20 x.50-thread Forming Voltage / Frequency Meter Enclosure Subassembly Plug-5 Wire Twistlock Water Tight Receptacle-5 Wire Twistlock Water Tight Flat Plug Extension Cord-3 FT Rivet-3/16 x 3/4-7/8 Grip Light-Combination Stop & Reverse Connector Pigtail 3 Prong 16G Alarm-Backup 12V Washer-7/16 Flat hardened SAE Zinc Washer-7/16 Lock Zinc

10 8 INSTRUMENT ENCLOSURE SUBASSEMBLY 09-3 NOTES: A - (4) ADDITIONAL NUTS, , REQUIRED. NOT SHOWN FOR CLARITY PURPOSES. B - (1) ADDITIONAL BOLT, , REQUIRED. NOT CALLED-OUT FOR CLARITY PURPOSES. C - (1) ADDITIONAL INTERIOR NUT, , REQUIRED. NOT SHOWN FOR CLARITY PURPOSES. D - (4) ADDITIONAL SWITCH CONNECTORS, , REQUIRED. NOT SHOWN FOR CLARITY PURPOSES.

11 09-3 INSTRUMENT ENCLOSURE SUBASSEMBLY 9 Item Ref. No. Qty Description Connector, Hydraulic, Joystick, Norstat Mating Connector For Amplifier / Controller Controller Card, Joystick Nut, 1/4-20, Hex, G8, Zinc Washer, 1/4, Lock, Zinc Washer, 1/4, Flat, Hardened, Sae, Zinc Insulator Vibration 1/4-20 X 3/4 L X 1 X 3/ Rivet, 3/16 Od X 1/4 L, Ss Instrumentation Enclosure, Powder Coated Bolt, X 1 L, Bh, Ss Din Rail, 2-1/2 L Relay, 8 Pins, Dpdt Socket, Relay, 8pins Nut, #10-32, Lock, Nylon, Zinc Bolt, 8-32 X 3/4 L, Bh, Cs, Ss Terminal Block 6-Pos Hd 75a 600v Bolt, 1/4-20 X 3/4, Cap, G8, Zinc Relay, 12v, 75amp Bolt, Ground Stud, 1/4-20 X 2, Cap, G8, Zinc Connector, Strain Relief,St, 3/4, Black Nylon Nut, 1/4-20, Lock, Nylon, Zinc Nut, #8-32, Lock, Nylon, Zinc Gauge, Water Temperature, Black Bezel Gauge, Oil Pressure, Black Bezel Volt Meter, Black Bezel Gauge, Fuel, Black Bezel Hour Meter, Black Bezel Instrumentation Panel Bolt, 1/4-20 X 1/2, Bh, Ss Temperature Controller, Hi & Low Programmed Light, Service, Amber, Panel Mount, 12v Switch, Mounting Body, Single Switch, Rocker, 12v, Dpdt Off-On-Off Switch Acuator, 2- Lights, Black, Red Lights Fuse Holder Tube In-Line 1/4 Terminal Spade Fuse, Tube, 20a, 1/4 X 1-1/4 L Fuse, Tube, 8a, 1/4 X 1-1/4 L Fuse, Tube, 2a, 1/4 X 1-1/4 L Switch, Rocker, 12v, Spst Switch Actuator, Black, Green Light Switch, Connector

12 10 VOLTAGE METER ENCLOSURE SUBASSEMBLY 09-3

13 09-3 VOLTAGE METER ENCLOSURE SUBASSEMBLY 11 Item Ref. No. Qty Description Electrical Box, 8x6x3.5 Continuous Hinge Screw, 1/4-20 X 1/2 L, Thread-Forming, Plated Connector, Strain Relief, St, 1/2, Black Nylon Washer, #10, Lock, Zinc Nut, #10-32, Hex, Zinc Panel, Mounting, For Item # Bolt, #10-32 X 3/8, Sh, Np Frequency Voltage Meter Flat Plug Extension Cord Plug, 5-Wire, Twistlock, Water-Tight Receptacle, 5-Wire, Twistlock, Water-Tight

14 12 FILTRATION SUBSYSTEM 09-3 NOTES: * PLUMBING ORIENTATION IS LOOKING DOWN FROM OVERHEAD A -(1) ADDITIONAL PER HOUSING REQUIRED. NOT SHOWN FOR CLARITY PURPOSES B -FASTENS TO WELD-IN ROIDS LOCATED ON CHASSIS C -ALSO IDENTIFIED IN WATER SUPPLY & RETURN SUB-ASSEMBLY D -FILTER DRAIN HOSE ALSO IDENTIFIED IN DRAIN SUB-ASSEMBLY E -FROM FILTER PUMP F-TOWATERTANK#2 G -(1) ADDITIONAL LOCATED AT OPPOSITE END OF HOSE

15 09-3 FILTRATION SUBSYSTEM 13 Item Ref. No. Qty Description Filter Housing,, Powder Coated Nut, Eye, Filter Lid Fastening, Galvanized Fitting, Tee, 1/8 Fpt (3x), Brass Fitting, Nipple, 1/8 X 1-1/2 L, Galvanized Pressure Gauge, 200psi, 1/8 Bottom Mount Valve, Bleeder, Filter Housing, 1/8 Mpt, Brass * Bolt, Eye, 1/2-13 X 2-1/2 L, Filter Lid Fastening * Pin, Dowel, Filter Eye Bolts, 1/2 Od X 1-1/2 L, Ss * Ring, Retaining, External, Filter Eye Bolts, 1/2 Id Filter Element 75-Micron Filter Element 30-Micron Bolt, 3/8-16 X 1, Cap, G8, Zinc Washer, 3/8, Lock, Zinc Washer, 3/8, Flat, Hardened Sae, Zinc Bolt, 3/8-16 X 1-1/2, Cap, G8, Zinc Nut, 3/8-16, Lock, Nylon, Zinc Plate, 3/8, Ds Filter Housing Mounting Plate, Steel Fitting,90, 3/4 Fpt X 3/4 Fpt, Brass Fitting, 3/4 Mpt X 3/4 Id Barb, Brass Clamp #16 Hose Hose-Cut, Filter Connecting, 3/4 Id X 5 L Fitting, Tee, (3x) 3/4 Fpt, Brass Fitting, 90, 3/4 Fpt X 3/4 Mpt, Brass Fitting, St, 3/4 Mpt X 1 Id Barb, Brass Clamp #20 Hose Hose-Cut, Filter Housing To Freshwater Tank, 83 L X 1 Id Fitting, St, 3/4 Mpt Hex Nipple, Steel Fitting, St, 3/4 X 2-1/2 L Nipple, Ss Fitting, 90, 3/4 Fpt X 3/4 Fpt Swivel, Steel Fitting, Tee, 3/4 Mpt X 3/4 Fpt X 3/4 Fpt, Run, Brass Hose, Drain, Green, Fresh Water Tank, 72 L X 1 Id Hose-Cut, Filter Pump To Filter Housing, 1 Id X 49 L Valve, Ball, 3/4, Brass

16 14 FINISHING SUBSYSTEM 09-3 NOTES: A -(1) ADDITIONAL REQUIRED. NOT SHOWN FOR CLARITY PURPOSES B -(3) ADDITIONAL REQUIRES. NOT CALLED-OUT AND / OR NOT SHOWN FOR CLARITY PURPOSES. C -(10) ADDITIONAL REQUIRED. NOT CALLED-OUT AND / OR NOT SHOWN FOR CLARITY PURPOSES. D -(10) ADDITIONAL REQUIRED. NOT CALLED-OUT AND / OR NOT SHOWN FOR CLARITY PURPOSES. E -(14) ADDITIONAL REQUIRED. NOT SHOWN FOR CLARITY PURPOSES.

17 09-3 FINISHING SUBSYSTEM 15 Item Ref. No. Qty Description Door / Siding Sub-Assembly, Polar White * Door / Siding Sub-Assembly, Safety Yellow Rear Axle Sub-Assembly Screw, 5/16-18 X 3/4 Unslot Hex Washer Hd Swageform Plated Tank, Air Seperator, Cyclone, Lp4500, Ss Emergency Brake Lever W/ Farrel Washer, 1/4, Flat, Hardened, Sae, Zinc Nut, 1/4-20, Lock, Nylon, Zinc Emergency Brake Lever W/ Farrel Brake Components, Cable, Parking Brake Clevis W/ Pin, 3/8 Od. W/ Cable Crimp Screw, 1/4-20 X 1/2 Self-Tapper, Plated Mount / Tab, Bracket, Cleaning Gun View Plate Subassembly Nut, 1/4-20, Hex, G8, Zinc Washer, 1/4, Lock, Zinc Hook, J, Dump Gun Mount Screw, 6-32 X 1/2 L, Phillips, Flat Head Mirror, Rectangular lp Seat Cushion, Bottom & Back Seat, Bottom Mounting Frame Sub-Assembly Bolt, 1/4-20 X 1, Hex Cap, Gr8, Zinc Bolt, 1/4-20 X 1-3/4, Cap, Gr8, Zinc Bolt, 8-32 X 1/2, Bh, Cs, Ss Joystick Enclosure Sub-Assy Nut, #8-32, Lock, Nylon, Zinc Washer, #8, Flat, Sae, Zinc Hood Sub-Assy Nut, 1/2-20, Nylock, Jam, Zinc Mirror, Fastening Block Bolt, 8mm-1.25 X 30mm, Fhcs, Chrome-Plated, Mirror Fastener Bolt, 1/2-20 X 1, Shcs, Chrome-Plated, Mirror Fastener Foot Brake Sub-Assy Front Axle Sub-Assembly Switch, Acuator, Foot Pedal, Lp4500, 4-Wheel Steer Model Hook & Loop (Velcro), Cut, 2 W X 5 L, Nylon Floor Pans / Foot Box Plate, 16-Gauge, 3-Way Ball Valve Steering Components, Enclosure, Powdercoated Washer, 5/16, Flat, Hardened Sae, Zinc Nut, 5/16-18, Lock, Nylon, Zinc Bolt, 5/16-18 X 2-1/2, Cap, Gr8, Zinc Operator s Entry Step, Alum Washer, 3/8, Flat, Hardened Sae, Zinc Washer, 3/8, Lock, Zinc Bolt, 3/8-16 X 1, Cap, G8, Zinc Fuel Tank Mounting Strap, Powdercoated Bolt, 3/8-16 X 2, Cap, G8, Zinc Cooling / Venting Equipment, Air Luver Safety Component, Seat Belt, Lp4500 * Liquid, Water, 1-Gal * Liquid, Coolant, 1-Gal

18 16 DOOR AND SIDING SUB ASSEMBLY 09-3

19 09-3 DOOR AND SIDING SUB ASSEMBLY 17 Item Ref. No. Qty Description * Door / Siding Sub-Assembly, Polar White * Door / Siding Sub-Assembly, Safety Yellow Door, 45 W X H, Filter / Engine Access, Polar White * Screw, #8-32 X 3/8 L, Self-Tapper, Plated Skin, 20g, Alum., Polar White,.040 X 37-3/4 X 57-1/2, Pass.-Side Skin, 20g, Alum., Polar White,.040 X 16-1/2 X 49, Pass.-Side Wheel Well Screw, 1/4-20 X 1/2 Self-Tapper, Plated Skin, 20g, Alum., Polar White,.040 X 40-1/2 X 51-3/4, Rear Seat Skin, 20g, Alum., Polar White,.040 X 42-3/4 X 57-1/2, Dr.-Side Door, W X H, Coil Access, Polar White * Screw, #8-32 X 3/8 L, Self-Tapper, Plated Door, 12 X 7-1/4 Fuel Access, Polar White * Screw, #8-32 X 3/8 L, Self-Tapper, Plated Door, W X 11 H, Burner Access, Polar White * Screw, #8-32 X 3/8 L, Self-Tapper, Plated Skin, 20g, Alum., Polar White,.040 X 16-1/2 X 32, Dr.-Side Wheel Well Door, W X 50 H, Rear Access, Polar White * Screw, #8-32 X 3/8 L, Self-Tapper, Plated Skin, 20g, Alum., Polar White,.040 X 14 X 41-3/4, Coil Enclosure Skin, 20g, Alum., Polar White,.040 X 15-3/4 X 41-3/4, Coil Enclosure Coil Heat Barrier, Adhesive-Backed, 12 W X 40 L * Door, W X 11 H, Burner Access, Safety Yellow * Door, W X H, Coil Access, Safety Yellow * Door, 45 W X H, Filter / Engine Access, Safety Yellow * Door, W X 50 H, Rear Access, Safety Yellow * Door, 12 X 7-1/4 Fuel Access, Safety Yellow * Skin, 20g, Alum., Safety Yellow,.040 X 14 X 41-3/4, Coil Enclosure * Skin, 20g, Alum., Safety Yellow,.040 X 15-3/4 X 41-3/4, Coil Enclosure * Coil Heat Barrier, Adhesive-Backed * Skin, 20g, Alum., Safety Yellow,.040 X 16-1/2 X 32, Dr.-Side Wheel Well * Skin, 20g, Alum., Safety Yellow,.040 X 16-1/2 X 49, Pass.-Side Wheel Well * Skin, 20g, Alum., Safety Yellow,.040 X 37-3/4 X 57-1/2, Pass.-Side Wheel Well * Skin, 20g, Alum., Safety Yellow,.040 X 42-3/4 X 57-1/2, Dr.-Side Side * Skin, 20g, Alum., Safety Yellow,.040 X 40-1/2 X 51-3/4, Rear Seat * Tape, Double-Sided, 3/4 W X.03 T

20 18 REAR AXLE SUB ASSEMBLY 09-3 NOTES: A -(3) ADDITIONAL LUG NUTS REQUIRED PER WHEEL. NOT SHOWN FOR CLARITY PURPOSES

21 09-3 REAR AXLE SUB ASSEMBLY 19 Item Ref. No. Qty Description Lug Nuts, 1/ Center Axle Cap Tire & Wheel Assy, Chromed Nut, 3/8-16, Hex, G8, Zinc Washer, 3/8, Lock, Zinc Washer, 3/8, Flat, Hardened Sae, Zinc Stud, 3/8-16 X 2 L, 3/4 Separate Threads Length, Black Oxide Axle, Rear, Ford 9, Hd, Lg Bearing, Directional E-Brake Caliper Mounting Plate Sub-Assy * Plate, 3/8, E-Brake Caliper Mounting, Lp Ws * Weld-In Roid, 2-1/2 L X 3/8-24, 1 Bore Depth Bolt, 3/8-16 X 1-1/4, Cap, G8, Zinc Shaft Component, End Yoke, U-Bolt For U-Joint, Lp4500 4ws U-Joint, Drive Shaft, (1) 1330 X (1) 1310, Lp Nut, 1/2-13, Lock, Nylon, Zinc Washer, 1/2, Flat, Hardened Sae, Zinc Plate 3/8 Propulsion Pump Mntg, Lp4500 4ws Motor, Hydraulic, Propulsion Bolt, 1/2-13 X 2, Cap, G8, Zinc Fitting, 45, #10m Oring X #8mjic, Steel Nut, 1/4-20, Hex, G8, Zinc Washer, 1/4, Lock, Zinc Brake Components, Rotor, 8 With U-Bolt, Lp4500 4ws Brake Component, Caliper, E-Brake, Lp4500 4ws * Bolt, 3/8-24 X 2-1/4, Cap, Gr, Zinc * Nut, 3/8-24, Lock, Metal, Zinc Clevis W/ Pin, 3/8 Od. W/ Cable Crimp Brake Components, Cable, Parking Brake

22 20 JOYSTICK ENCLOSURE SUB ASSEMBLY 09-3

23 09-3 JOYSTICK ENCLOSURE SUB ASSEMBLY 21 Item Ref. No. Qty Description Enclosure, Joystick Switch, Mounting Body, Single Switch, Rocker, 12v, Dpdt Off-On-Off Rocker Switch Actuator, Blk W/ 2-Red Lights Directional Joystick Bolt, 8-32 X 3/4, Bh, Cs, Ss

24 22 FOOT BRAKE SUB ASSEMBLY 09-3 NOTES: A- BRAKELINEMOUNTINGTABWELDMENT LOCATEDONCHASSIS

25 09-3 FOOT BRAKE SUB ASSEMBLY 23 Item Ref. No. Qty Description Foot Brake Sub-Assy Brake Components, Pedal, Single Cylinder Tank, Brake Fluid Reservior Liquid, Brake Fluid, 12oz Can Clamp #4 Hose 5/16 Screw Hose-Cut, Hydraulic, Foot Brake, 1/4 Id X 21 L Fitting, 90, 1/8 Mpt X 1/4 Id Barb. Brass Fitting, 90, 1/8 Mpt X 1/8 Mpt, Steel lb. Disc Brake Residual Valve Fitting, 1/8 Close Nipple, Sch Switch, Press., 1/4 Mpt, Brake System Fitting, Tee, 1/8 Fpt, Brass Fitting, St, 1/8 Mpt X 3/8-24 Iff, Brass Brake Components, Brake Line, Passenger-Side, 5-Bends Fitting, Tee, Run, 3/16 Imf X (2) 3/16 Iff Brake Components, Line Fastening Kit Brake Components, Brake Line, Driver-Side, 4-Bends

26 24 FRONT AXLE SUB ASSEMBLY 09-3 NOTES: A - (3) ADDITIONAL LUG NUTS REQUIRED. NOT SHOWN FOR CLARITY PURPOSES

27 09-3 FRONT AXLE SUB ASSEMBLY 25 Item Ref. No. Qty Description Lug Nuts, 1/ Center Axle Cap Tire & Wheel Assy, Chromed Steering Component, Tie Rod, Front, Outer, 11/16 Lh Thread Nut, Castle, Lower A-Arm, 9/ Connecting Rod 1 Od X 9/16-18 X 11/16-18 X 3-1/2, Tie Rod Brake Caliper, Front Left Brake Caliper, Front Right Brake Pad Kit For Left & Right Calipers Brake Caliper, Bracket, Left Brake Caliper Bracket, Right Brake Components, Line Fastening Kit Steering Component, Ball Joint, Upper A-Arm Steering Component, Upper A-Arm, Front Axle Spindle, Axle, Front, Pass.-Side Spindle, Axle, Front, Driver-Side * Kit, Axle Bearing & Seal Steering Component, Ball Joint, Lower A-Arm, Pass.-Side Steering Component, Lower A-Arm, Pass.-Side Steering Component, Lower A-Arm, Driver-Side Steering Component, Ball Joint, Lower A-Arm, Driver-Side Front Axle Crossmember Assy Shock Absorber, Automatic Level, Gas Suspension Spring

28 26 FUEL SUBSYSTEM 09-3 NOTES: A - LOCATED IN DRIVER-SIDE PORT B - LOCATED IN PASSENGER-SIDE PORT C-ONEEACHOFITEMS#7&#8ALSOEXIST PRESSURIZED WATER & HEATING SUB-ASSY. DRAWING

29 09-3 FUEL SUBSYSTEM 27 Item Ref. No. Qty Description Fuel Tank Sub-Assembly Tank Fuel, Diesel, 14-G Steel * Fuel Filler Cap Diesel Fuel, Clear Fitting, 90 3/8 Mpt X 3/8 Msae, Brass Fuel Filter Sub Assy Assy, Fuel Filter, Burner Fitting, St, 1/4 Mpt X 3/8 Msae, Brass Fitting, 90, 1/4 Mpt X 3/8 Msae, Brass Fuel Pump Sub Assy Pump, Fuel, 12v Hose, Assy, Fuel Tank To Fuel Pump Hose, Fuel, 3/8 Id, 13 L Fitting, St, 3/8 Id Barb X 3/8 Fsae Swivel, Brass Hose, Assy, Fuel Pump To Engine Supply Hose, Fuel, 3/8 Id, 106 L Clamp, 3/8 Id Hose Hose, Assy, Engine Return To Fuel Tank Hose, Fuel, 3/8 Id, 97 L Hose, Assy, Fuel Tank To Fuel Filter Hose, Fuel, 3/8 Id, 53 L Hose, Assy, Fuel Filter To Burner Supply Hose, Fuel, 3/8 Id, 20 L Hose, Assy, Burner By-Pass To Fuel Tank Hose, Fuel, 3/8 Id, 33 L Screw, Thread-Forming, 1/4-20 X 3/4 L Screw, Thread-Forming, 3/8-16 X 3/4 L

30 28 HYDRAULIC SUBSYSTEM SEE HYDRAULIC SUBSYSTEM-2 NOTES: A - ALSO SHOWN IN POWER UNIT SUB-ASSY DWG. NO B - ALSO SHOWN IN REAR AXLE SUB-ASSY DWG. NO C - P-PORT RETURN FROM STEER MANIFOLD D - ORBITAL STEERING VALVE RETURN TO TANK E - #71 FRONT STEER CYLINDER MOUNTING PLATE IS A CHASSIS WELDMENT

31 09-3 HYDRAULIC SUBSYSTEM-1 29 Item Ref. No. Qty Description Fitting, 90, 1 Msae X #12mjic, Steel Hose Assy, Cyclone Pump To Manifold: P1-Port Cyclone Hydraulic Motor Hose Assy, Tank To Cyc. Pump Fitting, 90, 3/8 Msae X #6mjic, Steel Prop Pump G-Port Hose Assy, Manifold: Ps-P Propulsion Pump For Lift Cylinder Fitting, Straight, Test Point Male X #4msae Fitting, 90, 3/4 Msae X #8mjic, Inlet, Steel Hose Assy, Steer Pump To Relief Valve Hydraulic Steering Pump, Gear Fitting, Straight, 1/2 Msae X #6mjic, Outlet, Steel Hose Assy,Steering Pump Suction From Tank Hydraulic Propulsion Pump Fitting, St, 3/4 M Oring X 3/4 Mjic, Steel Prop Pump S-Port Hose Assy, Propulsion Pump Suction From Tank Fitting, St, 1/2 M Oring X 1/2 Mjic, Steel Prop Pump T1/T2-Port Hose Assy, Tank To Propulsion Pump Fitting, St, 3/4 M Oring X 1/2 Mjic, Steel Prop Pump A & B-Port Hose Assy, Propulsion Pump To Propulsion Motor Hose Assy, Propulsion Pump To Propulsion Motor Motor, Hydraulic, Propulsion Fitting, 45, #10m Oring X #8mjic, Steel Hydraulic Tank Sub Assembly Hose Assy, Manifold: T-Port Return To Tank Hose Assy, Steer Manifold: P-Port To Pressure Relief Valve Hose Assy, Orbital Steer Valve: T-Port To Tank, Return Hose Assy, Manifold: B-Port To Lift Cylinder, Bottom Hose Assy, Manifold: A-Port To Lift Cylinder, Top Fitting, Straight, 3/4 Msae X #12 Mjic, Steel Hose Assy, Manifold To Cyclone Motor, Return Hose Assy, Manifold To Cyclone Motor, Pressure Fitting, Straight, 1/2 Msae X #8 Mjic, Steel Hose Assy, Manifold: T-Port To Bottom Heat Exchanger- Timed Hydraulic Cyclone / Lifting Manifold Sub Assembly: Hydraulic Cyclone Lifting Manifold Fitting, Straight, 3/8 Msae X #6mjic, Steel Fitting, St, 3/4 Msae X #12mjic W/ Oring, Steel Cooler, Hydraulic, Air (Cooled) Hose Assy, Heat Exchanger To Return Filter Hydraulic Press. Relief Valve Sub Assy

32 30 HYDRAULIC SUBSYSTEM NOTES: A - ALSO SHOWN IN POWER UNIT SUB-ASSY DWG. NO B - ALSO SHOWN IN REAR AXLE SUB-ASSY DWG. NO C - P-PORT RETURN FROM STEER MANIFOLD D - ORBITAL STEERING VALVE RETURN TO TANK E - #71 FRONT STEER CYLINDER MOUNTING PLATE IS A CHAS- SIS WELDMENT SEE HYDRAULIC SUBSYSTEM-1

33 09-3 HYDRAULIC SUBSYSTEM-2 31 Item Ref. No. Qty Description Bolt, 1/2-13 X 1-1/2, Cap, G8, Zinc Washer, 1/2, Lock, Zinc Washer, 1/2, Flat, Hardened Sae, Zinc Assy, Lifting, Hyd. Cylinder W/ Clevis Rod (3/4) 1.5 Bore Hose Assy: Lifting Cylinder Connecting Hoses (Supply) Fitting, 90, 1 Msae X #12mjic, Steel Cyclone Sub-Assy Steering Wheel Steering Wheel Fastening Adapter 7/8-36 Spline Orbital Steering Column Orbital Steering Valve Fitting, Straight, 1/2 Msae X #6mjic, Steel Hose Assy, Steer Valve: R-Port To Left Front Cylinder Hose Assy, Steer Valve: P-Port To Steer Manifold: T-Port Hose Assy, Steer Valve: L-Port To Selctor To Steer Manifold: T-Port Steering Manifold Sub-Assy Valves, Cartridge, Hyd. Manifold, Steering W/ Din Connectors Hose Assy, Steer Manifold: Selector P-Port To Right Front Cylinder Steering Component, Outer Tie Rod W/ Boot Steering Component, Cylinder, Lp Hose Assy, Steer Manifold: A-Port To Left Rear Cylinder Hose Assy, Steer Manifold: B-Port To Right Rear Cylinder Steering Component, Electrical Sensors W/ Alum. Clamps * Steering Component, Wiring Components * Steering Component, Line Clamp, 3/16, Ss * Mount / Tab, Steering Cylinder-To-Sensor, Lp4500 4ws Stud, 3/8-16 X 2 L, 3/4 Separate Threads Length, Black Oxide Washer, 3/8, Lock, Zinc Washer, 3/8, Flat, Hardened Sae, Zinc Bolt, 3/8-16 X 1-1/2, Cap, G8, Zinc Nut, 3/8-16, Hex, G8, Zinc Bolt, 3/8-16 X 1-3/4, Cap, G8, Zinc Plate 3/8 Rear Hyd. Steer Cylinder Mount, Lp4500 4ws Plate 3/8 Front Hyd. Steer Cylinder Weldment, Steel Hose Assy, Manifold: A-Port To Lift Cylinder, Top Hose Assy, Manifold: B-Port To Lift Cylinder, Bottom

34 32 HYDRAULIC TANK SUB ASSEMBLY 09-3 NOTES: A - (2) ADDITIONAL REQUIRED. NOT SHOWN FOR CLARITY PURPOSES B - (1) FITTING, 1/4"MSAE X TEST POINT , NOT SHOWN FOR CLARITY PURPOSES C - (1) ADDITIONAL REQUIRED. NOT SHOWN FOR CLARITY PURPOSES

35 09-3 HYDRAULIC TANK SUB ASSEMBLY 33 Item Ref. No. Qty Description Hydraulic Tank Sub Assembly Tank, Hydraulic, 12 X12 X36, Powdercoated W/ Sight Gauge * Gauge, Level, Hydraulic Oil, W/ Thermometer Nut, 3/8-16, Hex, G8, Zinc Washer, 3/8, Lock, Zinc Washer, 3/8, Flat, Hardened Sae, Zinc Stud, 3/8-16 X 2 L, 3/4 Separate Thread Length, Black Oxide lp Assy, Hydraulic Return Filter * Hydraulic Return Filter Element, 10-Micron, Water Absorbing Fitting, St, 1-1/2 Msae X 1 Mjic, Steel Hydraulic Press. Relief Valve Sub Assy Pressure Relief Valve Fitting, 90, 3/8 Moring X #6mfjic, Steel Fitting, St, 1/4 Mpt Plug, Steel * Fitting, St, 1/4 Msae X Test Point, Steel Fitting, St, 3/8 Msae X 3/8 Fpt, Steel Fitting, Tee, 3/8 Mpt X (2) 3/8 Fpt Run Tee, Steel Fitting, St, 3/8 Hex Nipple, Steel Fitting, St, 3/8 Mpt X #6mjic, Steel Fitting Plug 3/8 Mpt Steel Fitting, 90, 3/8 Mpt X #6mjic, Steel Lubricant, Hyd Oil, Iso Bolt, 3/8-16 X 1, Cap, G8, Zinc Washer, 3/8, Lock, Zinc Washer, 3/8, Flat, Hardened Sae, Zinc Fitting, 90, 1/2 Mpt X 1/2 Mpt, Steel Ball Valve, 1/2 Fpt, Brass Fitting, St, 1/2 Mpt Plug, Steel Cooling / Venting Equip. Breather, Hydraulic Fitting Nipple Hex 3/4 Mpt Steel, Breather Adapter Fitting, 2 Mpt X 3/4 Fpt Bushing, Sch80, Pvc Fitting, 90, 1 Mpt X #8mjic, Steel Fitting, 90, 1 Mpt X #12mjic, Steel Fitting, St, 1 Mpt, Plug, Steel Fitting, 90, 1 Mpt X #16mjic, Steel

36 34 HYDRAULIC PRESSURE RELIEF VALVE SUB ASSEMBLY 09-3

37 09-3 HYDRAULIC PRESSURE RELIEF VALVE SUB ASSEMBLY 35 Item Ref. No. Qty Description Pressure Relief Valve Fitting, 90, 3/8 Msae X #6mjic, Steel Fitting, 1/4 Mpt Plug, Steel Fitting, St, 1/4 Moring X Test Point, Steel Fitting, St, 3/8 Msae X 3/8 Fpt, Steel Fitting, Tee, 3/8 Mpt X (2) 3/8 Fpt Run Tee, Steel Fitting, St, 3/8 Hex Nipple, Steel Fitting, St, 3/8 Mpt X #6mjic, Steel

38 36 HYDRAULIC LIFTING SUB ASSEMBLY 09-3

39 09-3 HYDRAULIC LIFTING SUB ASSEMBLY 37 Item Ref. No. Qty Description Hyd. Cylinder, Lifting,1.50 Bore Fitting, St, 1/4 Mpt X #6mjic, Steel Fitting, Tee, 1/4 Male Run Tee, Steel Clevis Rod, 1/2-20, St. Steel

40 38 POWER UNIT SUBSYSTEM 09-3 NOTES: A FASTENING CLAMP, #17, NOT SHOWN B MOUNTING BRACKETS, #23 & #24, NOT SHOWN C OIL PRESSURE SENDER, #27, NOT SHOWN D TROMBETTA CABLE MOUNTING BRACKET, #32, NOT SHOWN E RIGHT ENGINE MOUNTING LEG, #36, NOT SHOWN F ROD END, #54, BELT TENSIONER, #55, 3/8-24 JAM NUT LH, #56, AND 3/8-24 JAM NUT RH, #57, NOT SHOWN G (2) ADDITIONAL VIBRATION ISOLATORS, #69, NOT SHOWN H ITEM #106 & #107 NOT SHOWN FOR CLARITY PUR- POSES I MOUNTING RAILS FASTEN TO PRESSURE PUMP MOUNTING PLATE WITH (4) OF #3, (8) OF #4, & (4) OF #8 J (1) ADDITIONAL FITTING, #125, NOT SHOWN K HYDRAULIC COOLER MOUNT / TAB, #136, NOT SHOWN L FASTENERS NOT SHOWN FOR CLARITY PUPOSES

41 09-3 POWER UNIT SUBSYSTEM 39 Item Ref. No. Qty Description Item Ref. No. Qty Description Engine Build Sub-Assy Tube, 2-1/2 Od, Steel, Muffler Exhaust Elbow Engine, 66hp, 2.4l, 4-Cyl., Cooling System Kit Engine Cradle Sub-Assy Bolt, 1/2-13 X 1-1/2, Cap, G8, Zinc Over-Hung Load Adptr Mounting Plate Washer, 1/2, Flat, Hardened Sae, Zinc Bolt, 12 X 25 Mm, Cap, Zinc Nut, 1/2-13, Lock, Nylon, Zinc Pressure Pump Plate Sub-Assy Bolt, 3/8-16 X 1-1/4, Cap, G8, Zinc Pressure Pump Mounting Plate Washer, 3/8, Flat, Hardened Sae, Zinc Mount / Tab, Weldment, Belt Tensioner Nut, 3/8-16, Lock, Nylon, Zinc Pressure Pump Sub Assy Assy, Bearing & Supporting Shaft Pump, Water, Plunger,P455, 5.5gpm, 5000psi Bolt, 10 X 30 Mm, Cap, Zinc /4-20 X 3 All-Thread Bolt, 3/8-16 X 1, Cap, G8, Zinc Clutch Assy 12v 2-Groove Washer, 3/8, Flat, A+N, S/S Plate, 1/2, Giant Clutch Mounting Assy, Alum Groove Pulley, Press. Pump & Over-Hung Load Adapter Driver Bolt, 6 X 20 Mm, Cap, Zinc Bushing For Engine Pulley Washer, 6mm, Flat, Sae, Zinc Belt, V, Press. Pump Washer, 6mm, Lock, Zinc Exhaust Tube Engine-To-Muffler, Aluminized Steel Switch, Pressure, Giant Clamp, V, John Deere Engine Flange-To-Exhaust Tubing Fitting, 1/2 Mpt X 3/8 Fpt Bushing, Steel Safety Component, Belt Guard, Vented Pump Mounting Rails B O Lt, 5/16-18 X 1, Cap, G8, Z Fitting, 3/4 Mpt X 1/2 Mpt, St, Steel Washer, 5/16, Flat, Hardened Sae, Zinc Fitting, St, 1/2 Fpt Swivel X 1/2 Mpt, Steel Washer, 5/16, Lock, Zinc Fitting, 1/2 Mpt X 1/2 Mjic, St, Steel Nut, 5/16-18, Lock, Nylon, Zinc Oil, Pressure Pump, 20w Mount / Tab, Belt Guard Bracket Anti-Drain Solenoid Sub Assy Mount / Tab, Belt Guard Bracket Solenoid, Water, 12vdc, Anti-Weeping Bolt, 3/8-16 X 1-1/2, Cap, G8, Zinc Fitting, Tee, Male Run 1/2 Id, Brass Water Temp. Sender, 280f Fitting, St, 1/4 Mpt X 3/8 Id Barb, Brass Oil Pressure Sender Fitting, 90, 1/8 Mpt X 3/8 Id Barb. Brass Trombetta Solenoid Fitting, St, 1/2 Mpt X 3/8 Id Barb, Brass Bolt, 1/4-20 X 3/4, Cap, G8, Zinc Fitting, St, 1/2 Mpt X 3/4 Id Barb, Brass Washer, 1/4, Flat, Hardened, Sae, Zinc Valve, Bleeder, 1/2 Mpt, Brass Washer, 1/4, Lock, Zinc Hose-Cut, Solenoid Loop, 3/8 Id X 16 L Trombetta Solenoid Mounting Bracket Hose-Cut, Solenoid To Ground, 3/8 Id X 36 L Bolt, X 35 Mm, G8, Zinc Clamp #6 Hose Bolt, X 45 Mm, G8, Zinc Charge Pump Sub-Assy Channel 3 Left Engine Mounting Leg, Steel Charge Pump, Pressure Pump Channel 3 Right Engine Mounting Leg, Steel Fitting, 90, 1 Mpt X 1 Id Barb, Pvc Sch Air Intake Sub-Assy Fitting St 3/4 Id X 3/4 Mpt Brass Filter, Air, John Deere, Universal Sheave, 1-Groove Pulley, Generator Driven U-Bolt, Muffler Bolt, Square-Head, 3/8-16 X 1-1/2 L, Blk Oxide Tube, 2.5 Od X 1/16 W, 304ss, Air Intake Bolt, 3/8-16 X 1-3/4, Cap, G8, Zinc Hose, Tube Connecting, Air Intake, 2-1/2 Id X 2 L Power Unit Hydraulic Sub-Assy Clamp #36 Hose Over-Hung Load Adapter Plate, 3/8, Alum., Air Filter Spacer Groove Pulley, Ohla Driven Generator Build Sub-Assy Bushing For Ohla Pulley Generator Belt, V, Ohla Bolt, 3/8-16 X 3/4, Cap, G8, Zinc Bolt, 7/16-14 X 1-1/4, Cap, G8, Zinc Washer, 3/8, Lock, Zinc Washer, 7/16, Flat, Hardened Sae, Zinc Pulley / Fan Sub-Assy Washer, 7/16, Lock, Zinc Cooling / Venting Equip., Fan Weldment Hydraulic Propulsion Pump Sub-Assy Sheave, 1-Groove Pulley, Generator Driven Hydraulic Propulsion Pump Sheave, 1-Groove Pulley, Charge Pump Driver Fitting, St, 3/4 M Oring X 1/2 Mjic, Steel Prop Pump A & B-Port Belt, Ax37, Generator Fitting, 90, 3/8 M Oring X 3/8 Mjic, Steel Prop Pump G-Port Belt, Ax Fitting, St, 1/2 M Oring X 1/2 Mjic, Steel Prop Pump T1/T2-Port Rod End, 3/8-24, Rh, Generator Belt Tensioner Fitting, St, 3/4 M Oring X 3/4 Mjic, Steel Prop Pump S-Port Belt Tensioner, Generator, 3/4 Od X 5-1/2 L X 3/8-24lh X 3/8-24rh Bolt, 1/2-13 X 6, Cap, G8, Zinc /8-24 Jam Nut, Lh Thread Cyclone Hydraulic Pump Sub-Assy /8-24 Jam Nut, Rh Thread Pump, Hydraulic, Cyclone Generator Fastening Plate Sub-Assy Fitting, 90, 1-1/4 M Oring X 1 Mjic, Steel Cyc Pump Suction Plate, 1/2, Generator / Charge Pump Mounting Fitting, St, 3/4 M Oring X 1/2 Mjic, Steel Cyc Pump Discharge Mount / Tab, Weldment, Generator Tensioner Heat Exchanger Sub-Assy Bolt, 3/8-16 X 1, Cap, G8, Zinc Cooler, Hydraulic, Air (Cooled) Bolt, 3/8-16 X 1-1/2, Fh, G8, Np Mount / Tab, Hydraulic Cooler Relay Enclosure Sub-Assy Hyd. Cooler Mounting Strap, 1/8, Steel Electrical Enslosure Nema12/13, 6x6x Fitting, St, 3/4 Msae X #12mjic W/ Oring, Steel Panel, Electrical Enclosure, 6x Bolt, 5/16-18 X 1-1/4, Cap, G8, Zinc Relay, 12v, 75amp Nut, 5/16-18, Hex, G8, Zinc Relay, Trombetta Control Module Steering Pump Sub-Assy Connector, Strain Relief, St, 1/2, Black Plastic Hydraulic Steering Pump, Gear Insulator Vibration 1/4-20x3/4 L X 1 X 3/ Fitting, 90, 3/4 Msae X #8mjic, Inlet, Steel Nut, 1/4-20, Hex, Zinc Fitting, Straight, 1/2 Msae X #6mjic, Outlet, Steel Muffler Sub-Assembly Hose-Cut, Fuel, Radiator Overflow, 5/16 Id X 42 L, Lp Flowmaster Muffler Washer, #10, Flat, Sae, Zinc Exhaust Cap / Rain Guard U-Bolt, Muffler

42 40 PRESSURIZED WATER & HEATING SYSTEM 09-3 THE COMPONENTS IDENTIFIED BELOW ARE LOCATED IN THE FRONT OF THE UNIT UNDER THE VIEW PLATE. NOTES: A - (1) ADDITIONAL FASTENING STUD NOT SHOWN B - (2) ADDITIONAL SCREWS NOT SHOWN C - FASTENING HARDWARE NOT SHOWN FOR CLARITY PURPOSES D - ONE EACH OF ITEMS #39 & #40 ALSO EXIST FUEL SUPPLY & RETURN SUB-ASSY. DRAWING

43 09-3 PRESSURIZED WATER & HEATING SYSTEM 41 Item Ref. No. Qty Description Burner / Coil Sub-Assy Burner, Oil, 12v Washer, 3/8, Flat, Hardened Sae, Zinc Washer, 3/8, Lock, Zinc Nut, 3/8-16, Hex, Zinc Coil Heater 1/2 I.D. Sch 80, 14 Dia W/ Tank Assy Tube, Exhaust W/ Hood, 6.75 Dia, Screw, 1/4-20 X 1/2 Self-Tapper, Plated Fitting, Nipple, 1/2 Id X 2 L, Sch80 Seamless Fitting, Male Run Tee, (3) 1/2 Fpt, Steel Thermocoupler, 10k Psi Valve Relief Pressure, Adj., 6k Psi Fitting, St, 1/2 Mpt X 3/8 Mjic, Steel Ball Valve Sub-Assy Valve, Ball, 3-Way, 5kpsi Fitting, Male Run Tee, 1/2 Mpt X (2) 1/2 Fpt, Steel Fitting, 90, 1/2 Mpt X 3/8 Mpt, Steel Fitting, 90, 1/2 Mpt X 3/8 Mjic, Steel Fitting, St, 1/2 Mpt X 1/4 Fpt, Bushing, Steel Gauge, Pressure, 10k, 1/4 Mpt, Bottom-Mount Unloader Assembly, 3000psi, 8gpm, 1/2 Fpt Fitting 90 3/8 Mpt X #6mjic, Steel Fitting, 90, 1/4 Mpt X 3/8 Id Barb. Brass Hose-Cut, Unloader To Water Tank, 3/8 Id X 73 L Clamp #6 Hose Cleaning Gun Sub-Assy Cleaning Gun Assy, 4500psi, 10gpm, 3/8 Inlet Fitting, St, 22mm-1.5 Female Swivel Coupling X 3/8 Fpt, Ss Fitting, St, 22mm-1.5 Male X 3/8 Mpt, Ss Fitting Straight 1/4 Fpt X 1/4 Fpt, Coupling, Steel Nozzle 1/4 Meg 4008 Steel Pressurized Water Hose Assy s Press. Pump To Coil, 1/2 Id X 82 L Coil To Ball Valve, 3/8 Id X 201 L Ball Valve To Curb Cleaner, 3/8 Id X 41 L Ball Valve To Cyclone, 3/8 Id X 38 L Ball Valve To Ball Valve, 3/8 Id X 36 L Ball Valve To Dump Gun, 3/8 Id X 72 L Fitting, St, 1/4 Mpt X 3/8 Msae, Brass Fitting, 90, 1/4 Mpt X 3/8 Msae, Brass

44 42 WATER SUPPLY & RETURN SUBSYSTEM 09-3 NOTES: A - TWO ADDITIONAL, NOT SHOWN B - FOUR ADDITIONAL, NOT SHOWN C - SEE DRAIN SYSTEM SUB-ASSY. FOR DETAILS SEE; DWG NO D - ITEMS 1-6, SEE INDIVIDUAL SUB-ASSY. DRAWINGS E - ONE ADDITIONAL, NOT SHOWN FOR CLARITY PURPOSES F - LOCATED IN WATER TANK #2 G - SHOWN TWICE FOR CLARITY PURPOSES H - ITEMS #30-#32: LOCATED IN RECLAIM TANK #1 I - ITEMS #23-#29 & #33: LOCATED IN RECLAIM TANK #3, UNLESS OTHERWISE NOTED

45 09-3 WATER SUPPLY & RETURN SUBSYSTEM 43 Item Ref. No. Qty Description Fresh Water #3 Sub-Assembly Fresh Water #2 Sub-Assembly Reclaim Tank #3 Sub-Assembly Reclaim Tank #2 Sub-Assembly Reclaim Tank #1 Sub-Assembly Fresh Water #1 Sub-Assembly Fitting, 90, 1 Mpt X 1 Id Barb, Sch80, Pvc Clamp, #16, Worm-Drive Hose-Cut, Fresh Water Tank Equalizer, 1 Id X 12 L Fitting, Tee, Branch, 1 Barb X 1 Mpt X 1 Barb, Pvc Hose-Cut, Fresh Water Tank Equalizer, 1 Id X 30 L Hose-Cut, Fresh Water Tank To Charge Pump, 1 Id X 50 L Filter Pump Suction Sub Assy Pump, Water, Ele. Motor Driven, 1-/4 Fpt, 230v, 3/4 Hp Nut, 5/16-18, Lock, Nylon, Zinc Washer, 5/16, Flat, Hardened Sae, Zinc Bolt, 5/16-18 X 1-1/2, Cap, G8, Zinc Fitting, 90, 3/4 Mpt X 3/4 Fpt, Br Fitting, St, 3/4 Mpt X 1 Id Barb, Br Clamp, #20, Worm-Drive Hose-Cut, Filter Pump To Filter Housing, 1 Id X 49 L Hose-Cut, Reclaim Tank #3 To Filter Pump, 1 Id X 36 L Fitting, St, 1 Mpt X 1 Hose Barb, Sch 80 Pvc Fitting, St, 1 Mpt Close Nipple, Sch80, Pvc Fitting, 90, 1 Fpt X 1 Fpt, Sch80, Pvc Filter Screen, Ss, 1 Mpt Nylon Adapter, 30-Mesh Fitting, Tee, 1 Fpt, Sch80, Pvc Fitting Straight 2 Mpt X 1/2 Fpt Bushing Galvanized Switch, Liquid Level, 1/2 Mpt Fitting, St, Nipple, 1 Id X 12 L, Sch80, Pvc Fitting, St, 1 Fpt X 1 Fpt, Coupling, Sch80, Pvc Basket, Dispensing Catalyst, Water Tank, Ss Switch, Float, Tethered With Cable Fitting, St, 1/2 Fpt X 2 Mpt Bushing, Sch80, Pvc Connector, Strain Relief, 90deg, 1/ id, Black Nylon Hose-Cut, Filter Housing To Freshwater Tank, 83 L X 1 Id Fitting, St, 1-1/2 Mpt X 1-1/2 Id Barb, Sch80, Pvc Hose-Cut, Cyclone Return To Tank, 1 Id X 164 L Fitting, St, 1 Mpt X 3/8 Fpt Bushing, Steel Unloader Return Fitting, 90, 3/8 Mpt X 3/8 Id Barb. Brass Clamp #6 Hose Hose-Cut, Breather, Unloader To Water Tank, 3/8 Id X 73 L Fitting, 90, 2 Mpt X 2 Id Hose Barb, Sch80, Pvc Clamp, #32, Worm-Drive Hose-Cut, Reclaim Tank Down Tubes, 2 Id X 28 L Fitting, Nipple, 2 Id X Close, Sch80, Pvc Fitting, St, 2 Fpt X 2 Fpt Coupling, Sch80, Pvc Fitting, 90, 1/2 Mpt X 1/4 Id Barb, Sch40, Pvc Clamp, Worm-Drive, # Hose-Cut, R. Union To Fresh Water Tank #1