ORDERING & PAYMENT INFORMATION... 3 SHIPPING & RETURNS INFORMATION... 4 HUBS & RELATED PARTS...

Transcription

1 Contents ORDERING & PAYMENT INFORMATION... 3 SHIPPING & RETURNS INFORMATION... 4 HUBS & RELATED PARTS lug nuts... 5 wheel studs... 5 dust covers... 6 wheel adapters... 6 wheel spacers... 6 wheel supports... 6 hat spacers... 6 PIT EQUIPMENT... 7 toe plates &... 7 BRAKE PARTS brake hoses, fittings & related caliper brackets UPPER CONTROL ARMS & PARTS ball joint plates...14 inner shaft style control arms & parts wide split plate uppers Metric chassis Pierce chassis Chevelle style...24 Camaro style Street rod uppers adjustable heim joint upper control arms LOWER CONTROL ARMS & PARTS dirt style... 29,31 asphalt style misc replacement parts for UB lower control arms replacement bushings for stock control arms UMP lower control arms & parts SPRING PARTS coil over parts coil for 5" & 5-1/2" springs SHOCK MOUNTS upper coil over - angled style round tube clamp-on round tube clamp-on weight mounts square tube clamps rear shock mount spacers STEERING PARTS couplers u-joints steering linkage STABILIZER BARS & PARTS stabilizer bars sway bar adjusters BALL JOINTS lower ball joints upper ball joints ball joint sleeves monoball pins

2 TRAILING ARMS TIE RODS SPINDLES & SPINDLE PARTS FLOATER PARTS REAR SUSPENSION PARTS tube clamps trailing arm mounts panhard bars panhard bar mounts panhard bar replacement parts center section brackets swing arms spacers for center section brackets spear rods torque arm brackets track locator brackets ROD ENDS monoballs & housings MOTOR MOUNTS motor plate mounting tabs CHASSIS BRACKETS chassis tabs body mounting tabs camber shims upper control arm mounts anti-dive slugs lower control arm mounts formed mounting brackets rectangular caps round caps ACCESSORIES scuff plates hood pins air cleaner nuts Ford water neck housing & parts THROTTLE PARTS gas pedals BATTERY BOXES & REPLACEMENT PARTS DRAG RACING PARTS HARDWARE bolts washers jam nuts SPACERS & REDUCERS threaded inserts weld nuts step spacers step bushings shock mount spacers motor mount spacers tapered spacers spacers for center section brackets INDEX FAX ORDER FORM

3 ORDERING You can place your order one of these ways: Call our parts department at (260) Hours are: Monday through Friday, 8:00 AM to 5:30 PM EDT. Fax your order 24 hours a day, 7 days a week to (260) A fax order form is located at the back of this catalog for your convenience. Orders can also be placed on the web at When placing your order, please provide the following information: Company name and contact Full shipping address (We cannot ship to PO boxes) Phone number Fax number if placing your order by fax address if placing your order online Payment method Special shipping instructions Please identify all parts by part number as listed in this catalog to ensure accuracy. SPECIAL ORDERS Special order parts may require full payment when the order is placed. Set-up and special order charges may apply. We cannot accept returns on special order parts. PAYMENT In order to provide the most effective service to our customers, we do accept credit cards for payment. Paying by credit card elminates COD charges and does not require you to be present at the time of delivery. We accept the following: Visa Mastercard American Express Discover If you do not wish to use a credit card, we also ship UPS COD. UPS will collect a money order or cashier s check at the time of delivery. Only US funds are accepted. pricing Pricing in this catalog is effective All prices are F.O.B. our shop. UB Machine reserves the right to determine price on the basis of jobber, warehouse or distributor. Due to constant changes in materials and manufacturing costs, pricing is subject to change without notice. Please verify prices when ordering. web site and ORDERING & PAYMENT INFORMATION Please visit our website at: for the latest products and pricing information. If you wish to contact us by , please send it to: parts@ubmachine.com. 3

4 SHIPPING & RETURNS INFORMATION shipping All orders are shipped via UPS Ground unless specified otherwise. UPS also offers Three Day Select, Second Day Air, and Next Day Air services, as well as Saturday Next Day Air. Additional shipping charges will apply. Please ask your sales representative for an estimate of these charges. BACKORDERS Unless specified otherwise, parts not in stock will be placed on backorder. They will then be shipped as soon as they become available. Please let us know if you would like to make other arrangements. RETURNS Please call us for an R.G.A. (Returned Goods Authorization) number before returning any parts. Special order parts are non-returnable. Please include a copy of the invoice with any return. Credit will be issued if the return is within 30 days of purchase and the returned part is in resalable condition. Otherwise, a restocking fee may be charged. DISCLAIMER OF WARRANTY All items sold by UB Machine, Inc. are intended for use in racing vehicles and are not intended for street or highway use. Because of their intended use, we make no warranty, either expressed or implied. User assumes all responsibility and risk. dealer information Our basic program consists of an initial $1000 buy-in. This entitles you to our dealer pricing and quantity discounts. There are no yearly requirements. If you are interested in becoming a dealer for UB Machine, please call us at (260) for a dealer packet. Information as well as an application can also be obtained online by visiting: Feel free to call us if you have any questions. trade shows Each year, we attend various trade shows throughout the season. These include each of the MCS Auction shows, the PRI show in Orlando, as well as several other shows throughout the Midwest. Please call or visit our web site for a detailed schedule of these shows. Check out our booth at a location near you to see why our parts are in such demand! printing errors 4 Although every effort has been made to proofread copy, we cannot accept responsibility for any typographical errors. If you come across any errors, kindly send us an at: webmaster@ubmachine.com.

5 hub PARTS lug nuts wheel studs Hard coat anodized for durability Heat treated! Hex will not round off D $1.25 ea. STEEL LUG NUT - 5/8" COARSE THREAD, DOUBLE CHAMFERED D $2.10 ea. ALUMINUM LUG NUT - 5/8" COARSE THREAD, DOUBLE CHAMFERED 2.750" SINGLE SIDED STEEL LUG NUTS /16" FINE THREAD $ MM $ MM $ /2" FINE THREAD $ /8" FINE THREAD $ /8" COARSE THREAD $1.10 Steel lug nuts are used by nascar, ASA, ARCA and NASCAR Truck Series Teams SINGLE SIDED ALUM LUG NUTS /8" FINE THREAD $ /8" COARSE THREAD $ ".710" 5/8"-18 (FINE).750" 5/8"-11 (COARSE) $2.70 ea $3.75 ea " 2.750".375" 5/8"-18 (FINE).375" 5/8"-11 (COARSE) $2.70 ea $3.65 ea " 3.750".850" 5/8"-18 (FINE) $3.20 ea..750" 5/8"-11 (COARSE) $5.00 ea. 5

6 HUB PARTS dust covers WIDE FIVE, PLAIN $ WIDE FIVE, BLUE $ WIDE FIVE, GOLD $ WIDE FIVE, RED $ WIDE FIVE, BLACK $6.00 Made from lightweight aluminum Will not distort, leak or crack Powder coated to resist corrosion, in your choice of colors wheel adapters WHEEL SPACERS $68.90 ea. Adapts 4-1/2" and 4-3/4" to 5" bolt pattern 1" thick Wheel studs included Machined from Billet aluminum $47.20 ea. 5 x 5" - 1" THICK $47.20 ea. 5 x 4-1/2" - 1" THICK $12.00 ea. 4 x 4-1/4" - 1/2" THICK WHEEL SUPPORTS Bolt spacing Machined from Billet aluminum hat spacers /8" THICK $ " THICK $ /4" THICK $ /16" THICK $ /16" THICK $28.70 UB Machine wheel supports and hat spacers are: Precision ground to maintain parallelism and control wheel run out Made from premium pre-hardened alloy steel. This prevents crushing the plate under high loads, which causes the lug nuts to loosen Used by Sprint Cup, ASA, ARCA and NASCAR Truck Series teams /8" THICK $ /4" THICK $ /16" THICK $25.50

7 PIT EQUIPMENT toe plates & These plates allow you to check your toe-in at race ride height on any surface (pavement, dirt, grass or gravel) Eliminates errors due to wheel run out/tire run out No need to scribe tires Installs in seconds Also availalbe for NASCAR, ARCA, ASA, Craftsman Truck, Busch, Pro Cup, Re Max, etc. (Anything with a 3-1/16" wheel locator) note: two are required PART # DESCRIPTION PRICE/EA TOE PLATE KIT FOR 3-1/16" WHEEL LOCATOR $ TOE PLATE KIT FOR WIDE 5 SPINDLES $ TOE PLATE $ ADAPTER FOR 3-1/16" WHEEL LOCATOR $ ADAPTER STUD FOR 3-1/16" WHEEL LOCATOR $ KNOB FOR TOE PLATE $ ADAPTER FOR WIDE 5 SNOUT $ WIDE 5 SPACER FOR 3" OFFSET $ A STUD FOR 3" OFFSET (9") $ WIDE 5 SPACER FOR 5" OFFSET $ A STUD FOR 5" OFFSET $ x 5 SQUARING PLATE $ WIDE 5 SQUARING PLATE $ $37.10 ea $28.70 ea (3") $25.40 ea (5") $27.60 ea $ ea $ ea $30.00 ea. SMALL SCREW-IN BALL JOINT SOCKET $30.00 ea. LARGE SCREW-IN BALL JOINT SOCKET $25.00 ea. SPINDLE NUT SOCKET FITS WIDE 5, 5 x 5, HOWE, VOGEL, AND PCR TYPE SPINDLES 7

8 brake fittings & related $0.90 ea. BRAKE LINE TAB $8.60 ea. 1/4" PISTON SPACER FOR METRIC CALIPER $6.40 ea. WILDWOOD RACING BRAKE FLUID BRAKE HOSES $8.60 ea. 1/2" PISTON SPACER $7.10 ea. CALIPER BOLT - GM $27.60 ea. BRAKE BIAS ADJUSTER 8 PART # SIZE DESCRIPTION PRICE/EA x 18" LONG STRAIGHT FITTING ON BOTH ENDS $ x 18" LONG STRAIGHT ON ONE END, 90 ON THE OTHER END $ x 18" LONG STRAIGHT FITTING ON BOTH ENDS $ x 18" LONG STRAIGHT ON ONE END, 90 ON THE OTHER END $17.80

9 BRAKE PARTS brake FITTINGS & RELATED HARDWARE $5.10 ea. BRAKE FITTING STOCK GM CALIPER -4 TO 7/16" -20 W/ $4.60 ea. BRAKE FITTING -4 TO 1/8" PIPE W/ $1.90 ea $4.60 ea. BRAKE FITTING -4 TO 1/8" PIPE, STRAIGHT BRAKE FITTING -4 TO 3/8" -24 INVERTED FLARE $4.70 ea $4.60 ea. BRAKE BLEEDER FOR ALUMINUM CALIPERS BRAKE LINE FITTING METRIC CALIPER - STRAIGHT $13.50 ea $0.90 ea. METRIC CALIPER 90 BRAKE FITTING CLIP 9

10 BRAKE PARTS CALIPER BRACKETS 3" $12.80 ea. WELD-ON GM METRIC REAR CALIPER BRACKET - Fits 3" diameter axle tube A $9.60 ea. WELD-ON GM LARGE REAR CALIPER BRACKET - Fits 3" diameter axle tube $9.60 ea. WELD-ON GM LARGE REAR CALIPER BRACKET - Fits 3-1/2" diameter clamp 3" $12.80 ea. WELD-ON GM METRIC REAR CALIPER BRACKET - Fits 3-1/2" diameter clamp C $32.00 ea. CLAMP-ON GM METRIC REAR CALIPER BRACKET - Fits 3" diameter axle tube **All of our clamp-on caliper brackets come with grade 8 and a durable powder coat finish $29.70 ea. CLAMP-ON GM LARGE REAR CALIPER BRACKET -Fits 3" diameter axle tube **All of our clamp-on caliper brackets come with grade 8 and a durable powder coat finish L $16.50 ea R $16.50 ea. 10 BOLT-ON GM METRIC FRONT CALIPER BRACKET For Pinto Use with 11" diameter rotors L/H side BOLT-ON GM METRIC FRONT CALIPER BRACKET For Pinto Use with 11" diameter rotors R/H side

11 BRAKE PARTS CALIPER BRACKETS L $16.50 ea R $16.50 ea. BOLT-ON LARGE GM FT CALIPER BRACKET For Pinto Use with 11" diameter rotors L/H side 3" BOLT-ON LARGE GM FT CALIPER BRACKET For Pinto Use with 11" diameter rotors R/H side $5.90 ea $27.20 ea. WELD-ON DYNALITE REAR CALIPER BRACKET - Fits 3" diameter axle tube $5.90 ea. WELD-ON DYNALITE REAR CALIPER BRACKET - Fits 3-1/2" diameter clamp CLAMP-ON DYNALITE REAR CALIPER BRACKET - Fits 3" diameter axle tube **All of our clamp-on caliper brackets come with grade 8 and a durable powder coat finish 5-1/4" BOLT SPACING 5-1/4" BOLT SPACING L $9.10 ea. WELD-ON DYNALITE FRONT CALIPER BRACKET L/H side R $9.10 ea. WELD-ON DYNALITE FRONT CALIPER BRACKET R/H side 11

12 BRAKE PARTS CALIPER BRACKETS 3-1/2" BOLT SPACING 3-1/2" BOLT SPACING $5.90 ea. WELD-ON SUPERLITE REAR CALIPER BRACKET - Fits 3"diameter axle tube $5.90 ea. WELD-ON SUPERLITE REAR CALIPER BRACKET - Fits 3-1/2" diameter clamp L 3-1/2" BOLT SPACING 3-1/2" BOLT SPACING $9.10 ea. WELD-ON SUPERLITE FRONT CALIPER BRACKET L/H side $28.50 ea. CLAMP-ON SUPERLITE REAR CALIPER BRACKET - Fits 3" diameter axle tube **All of our clamp-on caliper brackets come with grade 8 and a durable powder coat finish $28.10 ea. CLAMP-ON SUPERLITE REAR CALIPER BRACKET Use with " rotor Fits 3" diameter axle tube **All of our clamp-on caliper brackets come with grade 8 and a durable powder coat finish R 3-1/2" BOLT SPACING $9.10 ea. WELD-ON SUPERLITE FRONT CALIPER BRACKET R/H side 12

13 BRAKE PARTS CALIPER BRACKETS 7" 7" L $61.50 ea R $61.50 ea. METRIC CALIPER BRACKET BRAKE FLOATER ASSEMBLY L/H side METRIC CALIPER BRACKET BRAKE FLOATER ASSEMBLY R/H side L PICTURE NOT YET AVAILABLE LARGE GM CALIPER BRACKET BRAKE FLOATER ASSEMBLY L/H side PICTURE NOT YET AVAILABLE $61.50 ea. PICTURE NOT YET AVAILABLE R $61.50 ea. LARGE GM CALIPER BRACKET BRAKE FLOATER ASSEMBLY R/H side PICTURE NOT YET AVAILABLE L SL CALIPER BRACKET BRAKE FLOATER ASSEMBLY L/H side $79.50 ea R SL CALIPER BRACKET BRAKE FLOATER ASSEMBLY R/H side $79.50 ea. 13

14 upper control arms BALL JOINT PLATES $5.95 ea. METRIC BALL JOINT PLATE - 3/16" THICK, FLAT USES PART # $9.10 ea. FORMED BALL JOINT PLATE USES PART # ea. METRIC BALL JOINT PLATE USES PART # D SPLIT BALL JOINT PLATE (2 PIECES) USES PART # $9.00 ea. 14

15 inner shaft style control arm parts upper control arms 15- SERIES (BOLT-IN BALL JOINT) UPPER CONTROL ARM PARTS PART # DESCRIPTION PRICE/EA FORMED BALL JOINT PLATE - USES PART # $ D SPLIT BALL JOINT PLATE (2PCS) $ INNER SHAFT 6" ALUMINUM $ INNER SHAFT 6" ALUMINUM - SLOTTED $ INNER SHAFT 6" STEEL - SLOTTED $ INNER SHAFT 6" STEEL $ INNER SHAFT 4-1/2" STEEL (71-73 PINTO) $ INNER SHAFT 5" STEEL (74-UP MUSTANG & PINTO) $ INNER SHAFT 5-1/2" STEEL $ INNER SHAFT 6-1/2" STEEL (64-72 CHEVELLE/67-70 CAMARO) $ INNER SHAFT 6-7/8" STEEL (78 & UP GM METRIC, S-10) $ INNER SHAFT 7-3/4" STEEL (70-81 CAMARO/73-77 CHEVELLE) $ A CASTER SLUG 0" OFFSET $ B CASTER SLUG 1/8" OFFSET $ C CASTER SLUG 1/4" OFFSET $ D CASTER SLUG 3/8" OFFSET $ E CASTER SLUG 1/2" OFFSET $ BALL JOINT (MOOG #K6024) $ NUT FOR INNER SHAFT $ GREASE ZERK $ BUSHING FOR INNER SHAFT $ $28.00 ea $31.30 ea. INNER SHAFT 6" ALUMINUM INNER SHAFT 6" ALUMINUM - SLOTTED $33.30 ea. INNER SHAFT 6" STEEL - SLOTTED caster slugs WITH 1/2" HOLE $29.00 ea. INNER SHAFT 6" STEEL A 0" OFFSET $ B 1/8" OFFSET $ C 1/4" OFFSET $ D 3/8" OFFSET $ E 1/2" OFFSET $ $22.75 ea. SET OF 5 15

16 upper control arms 16 inner shaft style control arms - bolt-in ball joint 6" All of UB s uppers come black powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded tubing in our arms. 15-SERIES PART NUMBERS LENGTH ALUM SHAFT $46.75 STEEL SHAFT $ /4" /2" /4" " /4" /2" /4" " /4" /2" /4" " /4" /2" /4" " /4" /2" /4" " note: all ub machine upper control arms are measured from the center of the inner shaft to the center of the ball joint. 15-XXX0 BOLT-IN BALL JOINT UPPER - ALUMINUM SHAFT 6" center-to-center on crosshaft Uses part # ball joint Large GM bolt-in ball joint 15-XXX4 BOLT-IN BALL JOINT UPPER - STEEL SHAFT HS $46.75 ea. $49.25 ea. please note: ub machine does not have the resources nor space available to stock every conceivable upper that we are capable of building. part numbers are listed as a convenience to our customers and to ensure order accuracy. a part number in our catalog does not imply that the part is necessarily in stock, only that we can build it. please ask your sales representative about stock status when placing your order. OFFSET UPPERS- STEEL SHAFT 8-3/4" x 1-1/4" OFFSET R $ /4" x 1-1/4" OFFSET L $ /4" x 1-1/4" OFFSET R $ /4" x 1-1/4" OFFSET L $ /4" x 1-1/2" OFFSET L $ /4" x 1-1/2" OFFSET R $ /2" x 1-1/4" OFFSET R $ /2" x 1-1/4" OFFSET L $51.00 $69.00 ea. 10-1/2" UPPER FOR BOLT-IN BALL JOINT 6" aluminum inner shaft Wide, with heim joint pivots note: if you need a control arm that is not listed, please contact us for price and availability. we manufacture special order a-arms to your specifications. (special set-up charge will apply.)

17 upper control arms inner shaft style control arms & PARTS - bolt-in ball joint All of UB s uppers come black powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded tubing in our arms. 15-XXX1 $54.00 ea. BOLT-IN BALL JOINT UPPER - ALUMINUM SLOTTED SHAFT Allows you to use caster slugs to set multi-caster settings using the same control arm 15-XXX3 BOLT-IN BALL JOINT UPPER - STEEL SLOTTED SHAFT SLUGS SOLD SEPARATELY $56.00 ea. 15-XXX1 AND 15-XXX3 SLOTTED PART NUMBERS (ANY LENGTH AVAILABLE) LENGTH ALUM SHAFT $54.00 STEEL SHAFT $ /2" " /4" /2" /4" " /4" /2" /4" " /4" /2" /4" " /4" /2" /4" " note: all ub machine upper control arms are measured from the center of the inner shaft to the center of the ball joint $31.30 ea. INNER SHAFT 6" ALUMINUM - SLOTTED caster slugs WITH 1/2" HOLE $33.30 ea. INNER SHAFT 6" STEEL - SLOTTED A 0" OFFSET $ B 1/8" OFFSET $ C 1/4" OFFSET $ D 3/8" OFFSET $ E 1/2" OFFSET $ $22.75 ea. SET OF 5 note: if you need a control arm that is not listed, please contact us for price and availability. we manufacture special order a-arms to your specifications. (special set-up charge will apply.) 17

18 upper control arms inner shaft style control arms - bolt-in ball joint All of UB s uppers come black powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded tubing in our arms. WIDE SPLIT PLATE UPPER FOR BOLT-IN BALL JOINT With twin plates which separate to allow mounting around chassis 6" aluminum or steel inner shaft (wide) 15-XXX0-WSP (ALUM) $46.75 ea. SLOTTED WIDE SPLIT PLATE UPPER FOR BOLT-IN BALL JOINT Allows you to use caster slugs to set multi-caster settings using the same control arm 6" aluminum or steel inner shaft (wide) 15-XXX1-WSP (ALUM) $54.00 ea. 15-XXX4-WSP (STEEL) $49.25 ea. 15-XXX3-WSP (STEEL) $56.00 ea. WIDE SPLIT PLATE UPPER PART NUMBERS LENGTH ALUM SHAFT $46.75/EA STEEL SHAFT $49.25/EA 10" WSP WSP 10-1/4" WSP WSP 10-1/2" WSP WSP 10-3/4" WSP WSP 11" WSP WSP 11-1/4" WSP WSP 11-1/2" WSP WSP* 11-3/4" WSP WSP* 12" WSP* WSP* *NOT STOCK ITEMS AT THIS TIME SLOTTED WIDE SPLIT PLATE UPPER PART NUMBERS LENGTH ALUM SHAFT $54.00/EA STEEL SHAFT $56.00/EA 10" WSP WSP 10-1/4" WSP WSP 10-1/2" WSP WSP 10-3/4" WSP WSP 11" WSP WSP 11-1/4" WSP WSP 11-1/2" WSP WSP* 11-3/4" WSP WSP* 12" WSP* WSP* note: all ub machine upper control arms are measured from the center of the inner shaft to the center of the ball joint. 18 note: if you need a control arm that is not listed, please contact us for price and availability. we manufacture special order a-arms to your specifications. (special set-up charge will apply.)

19 upper control arms inner shaft style control arms & Parts - high misalignment monoball All of UB s uppers come black powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded tubing in our arms. 6" 16-XXX0-A (ALUM) $49.50 ea.* HIGH MISALIGNMENT MONOBALL UPPER CONTROL ARM - ALUMINUM SHAFT 6" center-to-center on crosshaft *NOTE: STUD & BEARING NOT INCLUDED THIS IS THE HIGHEST STRENGTH, LIGHT WEIGHT CONTROL ARM ASSEMBLY OFFERED ANYWHERE. 16-XXXX-A SERIES UPPER CONTROL ARM PARTS PART # DESCRIPTION PRICE/EA A BALL JOINT STUD ADAPTER $ /8" MONOBALL HIGH MISALIGNMENT $ SNAP RING $ XXX4-A (STEEL) $52.00 ea.* HIGH MISALIGNMENT MONOBALL UPPER CONTROL ARM - STEEL SHAFT 6" center-to-center on crosshaft *NOTE: STUD & BEARING NOT INCLUDED 16-XXXX-A SERIES WITH 5/8" MONOBALL PART NUMBERS LENGTH ALUM SHAFT $49.50 STEEL SHAFT $ /2" A A 6-3/4" A A 7" A A 7-1/4" A A 7-1/2" A A 7-3/4" A A 8" A A 8-1/4" A A 8-1/2" A A 8-3/4" A A 9" A A 9-1/4" A A 9-1/2" A A 9-3/4" A A 10" A A 10-1/4" A A 10-1/2" A A 10-3/4" A A 11" A A note: all ub machine upper control arms are measured from the center of the inner shaft to the center of the ball joint. note: if you need a control arm that is not listed, please contact us for price and availability. we manufacture special order a-arms to your specifications. (special set-up charge will apply.) 19

20 upper control arms inner shaft style control arms & PARTS - high misalignment monoball All of UB s uppers come black powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded tubing in our arms. 16-XXX1-A 6" $57.00 ea. MONOBALL UPPER, 9-1/2" LONG, SLOTTED SHAFT, 5/8" MONOBALL - ALUMINUM SHAFT Allows you to use caster slugs to set multi-caster settings using the same control arm 16-XXX3-A $59.00 ea. MONOBALL UPPER, 9-1/2" LONG, SLOTTED SHAFT, 5/8" MONOBALL - STEEL SHAFT note: all ub machine upper control arms are measured from the center of the inner shaft to the center of the ball joint $31.30 ea. INNER SHAFT 6" ALUMINUM - SLOTTED caster slugs with 1/2" hole 16-XXX1 AND 16-XXX3 SLOTTED PART NUMBERS (ANY LENGTH AVAILABLE) LENGTH ALUM SHAFT $57.00 STEEL SHAFT $ /2" A A 7" A A 7-1/4" A A 7-1/2" A A 7-3/4" A A 8" A A 8-1/4" A A 8-1/2" A A 8-3/4" A A 9" A A 9-1/4" A A 9-1/2" A A 9-3/4" A A 10" A A 10-1/4" A A 10-1/2" A A 10-3/4" A A 11" A A $33.30 ea. INNER SHAFT 6" STEEL - SLOTTED A 0" OFFSET $ B 1/8" OFFSET $ C 1/4" OFFSET $ D 3/8" OFFSET $ E 1/2" OFFSET $ $22.75 ea. SET OF 5 note: if you need a control arm that is not listed, please contact us for price and availability. we manufacture special order a-arms to your specifications. (special set-up charge will apply.)

21 upper control arms inner shaft style control arms & Parts - screw-in ball joint All of UB s uppers come black powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded tubing in our arms. 6" 19-XXX0 $46.75 ea. SCREW-IN BALL JOINT UPPER - ALUMINUM SHAFT 6" center-to-center on crosshaft Uses part # ball joint Small Chrysler screw-in ball joint 19-XXX4 $49.25 ea. SCREW-IN BALL JOINT UPPER - STEEL SHAFT OFFSET UPPERS - STEEL SHAFT /4" x 1-1/4" OFFSET $ /4" x 1-1/4" OFFSET $ " x 1-1/4" OFFSET $ /4" x 1-1/4" OFFSET $ /2" x 1-1/4" OFFSET $ SERIES PART NUMBERS LENGTH ALUM SHAFT $46.75 STEEL SHAFT $ /4" /2" /4" " /4" /2" /4" " /4" /2" /4" " /4" /2" /4" " /4" /2" /4" " note: all ub machine upper control arms are measured from the center of the inner shaft to the center of the ball joint. 19-SERIES (SCREW-IN BALL JOINT) UPPER CONTROL ARM PARTS PART # DESCRIPTION PRICE/EA INNER SHAFT 6" ALUMINUM $ INNER SHAFT 6" STEEL $ INNER SHAFT 4-1/2" STEEL (71-73 PINTO) $ INNER SHAFT 5" STEEL (74-UP MUSTANG & PINTO) $ INNER SHAFT 5-1/2" STEEL $ INNER SHAFT 6-1/2" STEEL (64-72 CHEVELLE/67-70 CAMARO) $ INNER SHAFT 6-7/8" STEEL (78 & UP GM METRIC, S-10) $ INNER SHAFT 7-3/4" STEEL (70-81 CAMARO/73-77 CHEVELLE) $ BALL JOINT (MOOG #K772) $ BALL JOINT SLEEVE $ NUT FOR INNER SHAFT $ GREASE ZERK $ BUSHING INNER SHAFT $3.20 note: if you need a control arm that is not listed, please contact us for price and availability. we manufacture special order a-arms to your specifications. (special set-up charge will apply.) 21

22 upper control arms inner shaft style control arms & PARTS - screw-in ball joint All of UB s uppers come black powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded tubing in our arms. 19-XXX1 $54.00 ea. SCREW-IN BALL JOINT UPPER - ALUMINUM SLOTTED SHAFT Allows you to use caster slugs to set multi-caster settings using the same control arm 19-XXX3 SCREW-IN BALL JOINT UPPER - STEEL SLOTTED SHAFT note: also available with needle bearing pivot bushing 19-XXX3-NB $ ea $31.30 ea. INNER SHAFT 6" ALUMINUM - SLOTTED caster slugs with 1/2" hole SLUGS SOLD SEPARATELY $56.00 ea. 19-XXX1 AND 19-XXX3 SLOTTED PART NUMBERS (ANY LENGTH AVAILABLE) LENGTH ALUM SHAFT $54.00 STEEL SHAFT $ /2" /4" " /4" /2" /4" " /4" /2" /4" " /4" /2" /4" " /4" /2" /4" " $33.30 ea. INNER SHAFT 6" STEEL - SLOTTED A 0" OFFSET $ B 1/8" OFFSET $ C 1/4" OFFSET $ D 3/8" OFFSET $ E 1/2" OFFSET $ $22.75 ea. SET OF 5 22 note: if you need a control arm that is not listed, please contact us for price and availability. we manufacture special order a-arms to your specifications. (special set-up charge will apply.)

23 upper control arms SPECIAL APPLICATION, INNER SHAFT STYLE CONTROL ARMS All of UB s uppers come black powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded tubing in our arms. METRIC CHASSIS 6-7/8" 6-7/8" 14-XXXX-XX 6-7/8" 6-7/8" $51.00 ea. UPPER WITH METRIC BALL JOINT - 6-7/8" SHAFT - USES PART # R 8" x 1-1/4" OFFSET RIGHT L 8" x 1-1/4" OFFSET LEFT L 8-1/2" x 1-1/2" OFFSET LEFT L 9" x 1-1/2" OFFSET LEFT L 9-1/2" x 1-1/2" OFFSET LEFT R $51.00 ea. Fits R/H GM metric chassis Standard bolt-in ball joint (# ), 8" long, with 1-1/4" offset, 6-7/8" inner shaft L $51.00 ea. Fits L/H GM metric chassis Standard bolt-in ball joint (# ), 8-1/2" long, with 1-1/2" offset, 6-7/8" inner shaft R $51.00 ea. Fits R/H GM metric chassis Screw-in ball joint, 8" long, with 1-1/4" offset, 6-7/8" inner shaft PIERCE CHASSIS 6-7/8" 6-7/8" L $51.00 ea. Fits L/H GM metric chassis Screw-in ball joint, 8-1/2" long, with 1-1/2" offset, 6-7/8" inner shaft 6-7/8" 6-7/8" /8-9-6L-WSP $51.00 ea. Fits L/H Pierce pre-2006 chassis Bolt-in ball joint, 9-7/8" long, with 1-1/2" offset, 6-7/8" inner shaft /8-9-6L-WSP $51.00 ea. Fits L/H Pierce 2007 and up chassis Bolt-in ball joint, 10-1/8" long, with 1-1/2" offset, 6-7/8" inner shaft $51.00 ea. Fits R/H Pierce pre-2006 chassis Bolt-in ball joint, 7" long, with 1-1/4" offset, 6-7/8" inner shaft note: if you need a control arm that is not listed, please contact us for price and availability. we manufacture special order a-arms to your specifications. (special set-up charge will apply.) 23

24 chevelle style upper control arms SPECIAL APPLICATION, INNER SHAFT STYLE CONTROL ARMS 6-1/2" 6-1/2" L $51.00 ea. Fits L/H Chevelle Frame Screw-in ball joint, 9-1/2" long, with 1-1/4" offset, 6-1/2" inner shaft - Fits Dirtworks chassis R $51.00 ea. Fits R/H Chevelle Frame Screw-in ball joint, 9" long, with 1-1/4" offset, 6-1/2" inner shaft - Fits Dirtworks chassis camaro style 7-3/4" &1/8L UPPER, CAMARO LH &1/8R UPPER, CAMARO RH /4" $ ea. $ ea. 15-SERIES CAMARO STYLE $51.00 ea. UPPERS* *NOTE: CAMARO STYLE UPPERS HAVE 7-3/4" STEEL INNER SHAFT. WILL NOT FIT CAMARO /8-6+1/8-L /8-6+1/8-R STOCK REPLACEMENT TUBULAR UPPER Fits Chevelle Frame 9-5/8" long with 1-5/8" offset 6-1/2" inner shaft 6-1/2" L UPPER, CAMARO LH R UPPER, CAMARO RH $ ea. $ ea. $ ea. $ ea. LENGTH PART # 7" /4" /2" /4" " /4" /2" /4" " /4" /2" /4" " RR $51.00 ea CAMARO UPPER 9" x 1-1/4" OFFSET TO REAR RIGHT SIDE LR $51.00 ea CAMARO UPPER 9-3/4" x 1-1/4" OFFSET TO REAR LEFT SIDE

25 upper control arms SPECIAL APPLICATION upper CONTROL ARMS All of UB s uppers come black powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded tubing in our arms. note: all ub machine upper control arms are measured from the center of the inner shaft to the center of the ball joint. street rod uppers OUR STREET ROD STYLE UPPERS ARE MANUFACTURED WITH A SMALL SCREW-IN BALL JOINT. 8" LONG AVAILABLE WITH A 4-1/2" OR 5" INNER SHAFT. *STREET ROD UPPERS ARE BASED ON PINTO OR 74-NEWER MUSTANG II INNER SHAFTS. NOTE: TEFLON BUSHINGS ARE ALSO AVAILABLE. OPTIONAL DESIGN PINTO STYLE SHAFT (4-1/2") $72.25 ea. * T $ ea. *TEFLON BUSHINGS ADJUSTABLE upper ARMs ADJUSTABLE UPPERS ARE AVAILABLE FOR LEFTHANDER, MOON, DIRTWORKS, GRT, AND SHAW STYLE CHASSIS. THEY ARE MANUFACTURED WITH A SCREW-IN BALL JOINT, 5/8" THREADS. LEFTHANDER CHASSIS R/H $21.20 ea L/H $21.20 ea. MOON CHASSIS R/H $21.20 ea L/H $21.20 ea. 74-NEWER MUSTANG II STYLE SHAFT (5") $72.25 ea. * T $ ea. *TEFLON BUSHINGS PART # DESCRIPTION PRICE/EA /8" CLEVIS $ BALL JOINT $19.70 DIRTWORKS CHASSIS R/H $21.50 ea L/H $21.50 ea. GRT AND SHAW CHASSIS R/H $21.50 ea L/H $21.50 ea $2.00 ea $1.70 ea. UPPER CONTROL ARM MOUNTING BRACKETS AND SPACERS, 5/8" HOLE note: if you need a control arm that is not listed, please contact us for price and availability. we manufacture special order a-arms to your specifications. (special set-up charge will apply.) 25

26 upper control arms *HEIM JOINT upper CONTROL ARMS All of UB s uppers come black powder coated to resist corrosion and are built with a medium alloy tube. There is no seamwelded tubing in our arms. note: all ub machine upper control arms are measured from the center of the inner shaft to the center of the ball joint. *HEIM JOINT LIGHTWEIGHT UPPERS DO NOT COME WITH THE HEIM. HEIMS ARE AVAILABLE SEPARATELY $39.10 ea. DWARF CAR STYLE UPPER CONTROL ARM (Uses Chevette ball joint) BOLT-IN BALL JOINT PART # LENGTH THREAD PRICE/EA /4" 1/2" $ /4" 1/2" $ /4" 5/8" $ /4" 5/8" $ /4" 5/8" $ SERIES UPPER CONTROL ARM PARTS PART # DESCRIPTION PRICE/EA BOLT-IN BALL JOINT $ SCREW-IN BALL JOINT $ R/H 1/2" HEIM $ R/H 5/8" HEIM $ R/H 3/4" HEIM $ STEP SPACER 1/2" ID x $1.80 3/4" STEP x 1/4" FLANGE (4 REQUIRED) SCREW-IN BALL JOINT PART # LENGTH THREAD PRICE/EA /4" 5/8" $ /4" 5/8" $ /4" 5/8" $ note: if you need a control arm that is not listed, please contact us for price and availability. we manufacture special order a-arms to your specifications. (special set-up charge will apply.)

27 lower control arms note: all ub machine lower control arms are measured from the center of the ball joint to the center of the heim joint or rubber bushing. 23-SERIES $43.50 ea. RECTANGULAR TUBE LOWERS Available with a large press-in or large screw-in ball joint Comes with rubber bushing holder and golf club strut mount All of UB s lowers come black powder coated to resist corrosion LARGE SCREW-IN BALL JOINT LENGTH PART # 15-5/8" " /8" " /8" " " SERIES RECTANGULAR TUBE LOWER ARM PARTS PART # DESCRIPTION PRICE/EA LARGE SCREW-IN BALL JOINT $ LARGE PRESS-IN BALL JOINT $ STRUT ROD END (GOLF CLUB) $ RUBBER BUSHING $ RUBBER BUSHING HOUSING $ STEPPED RUBBER BUSHING HOLDER $8.00 LARGE PRESS-IN BALL JOINT LENGTH PART # 15-5/8" " /8" " /8" " " $19.70 ea. STRUT ROD END (GOLF CLUB) - 6-1/2" LONG 3/4-16" LH THREADS, 1/2" HOLES $9.10 ea. RUBBER BUSHING $8.00 ea. STEPPED RUBBER BUSHING HOLDER note: if you need a control arm that is not listed, please contact us for price and availability. we manufacture special order a-arms to your specifications. (special set-up charge will apply.) 27

28 lower control arms note: all ub machine lower control arms are measured from the center of the ball joint to the center of the heim joint or rubber bushing. 25-SERIES $43.50 ea. ROUND TUBE LOWERS Available with a large press-in or large screw-in ball joint (not included) Has 3/4" boss for front strut mount All of UB s lowers come black powder coated to resist corrosion LENGTH LARGE SCREW-IN 3/4" THREAD LARGE SCREW-IN 5/8" THREAD LARGE PRESS-IN 3/4" THREAD LARGE PRESS-IN 5/8" THREAD 12-5/8" /8" /8" " /8" " /8" " " /8" SERIES ROUND TUBE LOWER ARM PARTS PART # DESCRIPTION PRICE/EA SWAY BAR TAB $ FLANGED STRUT ROD BOSS $ LARGE SCREW-IN BALL JOINT $ LARGE PRESS-IN BALL JOINT $ /8" SOLID ROD END 3/4" HOLE $ /4" SOLID ROD END $ /4" HEIM JOINT $ CROSS MEMBER SPACER 3/4" $ $5.20 ea. FLANGED STRUT ROD BOSS $4.70 ea. BOSS ONLY $13.70 ea. 5/8" THREAD, 3/4" BORE $3.20 ea. STEP SPACER - 1/2" ID x 3/4" STEP x 1-1/4" LONG - STEEL $17.00 ea. 3/4" THREAD, 3/4" BORE note: if you need a control arm that is not listed, please contact us for price and availability. we manufacture special order a-arms to your specifications. (special set-up charge will apply.)

29 lower control arms note: all ub machine lower control arms are measured from the center of the ball joint to the center of the heim joint or rubber bushing. dirt style 25-SERIES $43.50 ea. ROUND TUBE LOWER Uses 3/4" heim pivot with golf club strut mount LARGE SCREW-IN BALL JOINT LARGE PRESS-IN BALL JOINT 25-SERIES LENGTH PART # 16-5/8" GS 17-5/8" GS 18" GS 19" GS LENGTH PART # 16-5/8" GS 17-5/8" GS 18" GS 19" GS $43.50 ea. ROUND TUBE LOWER Has rubber bushing pivot with 3/4" diameter strut mount boss LARGE SCREW-IN BALL JOINT LENGTH PART # 16-5/8" RB 17-5/8" RB 18" RB 19" RB LARGE PRESS-IN BALL JOINT LENGTH PART # 16-5/8" RB 17-5/8" RB 18" RB 19" RB 25-SERIES $43.50 ea. ROUND TUBE LOWER Uses 5/8" heim pivot with golf club strut mount LARGE SCREW-IN BALL JOINT LARGE PRESS-IN BALL JOINT 25-SERIES LENGTH PART # 16-5/8" GS 17-5/8" GS 18" GS 19" GS LENGTH PART # 16-5/8" GS 17-5/8" GS 18" GS 19" GS $43.50 ea. ROUND TUBE LOWER Has rubber bushing pivot with golf club strut mount LARGE SCREW-IN BALL JOINT LENGTH PART # 16-5/8" RBGS 17-5/8" RBGS 18" RBGS 19" RBGS LARGE PRESS-IN BALL JOINT LENGTH PART # 16-5/8" RBGS 17-5/8" RBGS 18" RBGS 19" RBGS note: if you need a control arm that is not listed, please contact us for price and availability. we manufacture special order a-arms to your specifications. (special set-up charge will apply.) 29

30 asphalt style lower control arms note: all ub machine lower control arms are measured from the center of the ball joint to the center of the heim joint or rubber bushing. POST-1996 LARGE SCREW-IN BALL JOINT $43.50 ea. LENGTH PART # 15-1/2" L/H PC 17-3/4" R/H PC PICTURE NOT YET AVAILABLE POST-1996 LARGE PRESS-IN BALL JOINT $43.50 ea. POST /4 MONOBALL STYLE $49.30 ea. LENGTH PART # 15-1/2" L/H PC 17-3/4" R/H PC LENGTH PART # 15-1/2" L/H PC 17-3/4" R/H PC PRE-1996 LARGE PRESS-IN BALL JOINT LENGTH PART # 15-1/8" L/H /4" R/H $43.50 ea. PRE /4 MONOBALL STYLE $49.30 ea. LENGTH PART # 15-1/8" L/H /4" R/H note: if you need a control arm that is not listed, please contact us for price and availability. we manufacture special order a-arms to your specifications. (special set-up charge will apply.)

31 lower control arms note: all ub machine lower control arms are measured from the center of the ball joint to the center of the heim joint or rubber bushing. dirt style ROCKET LOWER - MONOBALL5/8" STRUT BOSS $49.30 ea. LENGTH PART # 15-1/8" L/H RBR 19-1/8" R/H RBR 27-SERIES MONOBALL $49.30 ea. LOWER ARMS Has 3/4" threads, with a 3/4" front strut mount Use a 3/4" monoball and stud (not included) LENGTH PART # 15-5/8" " *16-5/8" " *17-5/8" *18" *19" A *FOR 5/8" THREADS, ADD A -5 AT THE END OF THE PART # STEP SPACER 1/2" ID x 3/4" STEP x 1-1/4" LONG - ALUMINUM $3.00 ea. 27-SERIES REPLACEMENT PARTS PART # DESCRIPTION PRICE/EA STRUT ROD END $ FLANGED STRUT ROD BOSS $ NYLOCK MODIFIED FOR MONOBALL 5/8"-18 $ STUD FOR LARGE SCREW-IN $ STUD FOR LARGE PRESS-IN $ /4" HEIM JOINT $ /4" TEFLON MONOBALL $ /4" MONOBALL HOUSING $ SNAP RING $ A CROSS MEMBER SPACER 3/4" $ $14.10 ea. STRUT ROD END - 3/4-16" LH THREADS, 1/2" HOLE $5.20 ea. FLANGED STRUT ROD BOSS note: if you need a control arm that is not listed, please contact us for price and availability. we manufacture special order a-arms to your specifications. (special set-up charge will apply.) 31

32 lower control arms misc replacement parts for ub lower control arms $19.70 ea $14.10 ea. STRUT ROD END - 6-1/2" LONG 3/4-16" LH THREADS, 1/2" HOLES $9.10 ea. RUBBER BUSHING $9.50 ea. STRUT END MOUNT BRACKET $5.20 ea. FLANGED STRUT ROD BOSS STRUT ROD END 3/4-16" LH THREADS, 1/2" HOLE $8.00 ea. STEPPED RUBBER BUSHING HOLDER $4.80 ea. REAR STRUT TAB 5/16" THICK $13.70 ea. 5/8" SOLID ROD END, 3/4" HOLE STEP SPACERS *SEE PAGES FOR ADDITIONAL OPTIONS $12.70 ea A $3.00 ea. STRUT ROD END 5/8" BORE, 5/8" THREAD $17.00 ea A $3.00 ea. STRUT ROD END 3/4" BORE, 3/4" THREAD 1/2" ID x 5/8" STEP x 1-5/16" LONG - ALUM 1/2" ID x 3/4" STEP x 1-1/4" LONG - ALUM

33 lower control arms note: all ub machine lower control arms are measured from the center of the ball joint to the center of the heim joint or rubber bushing. 4-1/8" $10.50 ea. TURNBUCKLE 5/8" RH & LH THREADS $ ea. UNISTRUT 16-5/8" CENTER TO CENTER - LRG SCREW-IN BALL JOINT-MASTERS LEFT SIDE $ ea. UNISTRUT 17-5/8" CENTER TO CENTER - LRG SCREW-IN BALL JOINT-MASTERS RIGHT SIDE $ ea. UNISTRUT 18-5/8" CENTER TO CENTER - LRG SCREW-IN BALL JOINT-MASTERS RIGHT SIDE REPLACEMENT BUSHINGS FOR STOCK CONTROL ARMS PART # DESCRIPTION PRICE/ ARM $ CAMARO $ CAMARO WITH 1-3/8" DIA FRONT BUSHING $ CAMARO WITH 1-5/8" DIA FRONT BUSHING $ CAMARO $ CAMARO $ CHEVELLE $ CHEVELLE $ CHEVELLE $ CHEVELLE $ CUTLASS $ CUTLASS $ F $ FULL SIZE FORD 79 & UP $ FULL SIZE FORD $ GRAN PRIX $ GRAN PRIX $ GRAND AM $ IMPALA ALL EXCEPT $ IMPALA /8" DIA FRONT BUSHING (FOR 1-5/8" FRONT BUSHING USE KIT) $ LEMANS $ $ ea. LOWER CONTROL ARM - NON-STRUT, HOWE STYLE, RIGHT SIDE (RUBBER BUSHING AND BALL JOINT INCLUDED) As featured in Stock Car Magazine! designed as a direct replacement for factory-style rubber bushings, ub machine s new, solid bushings ELMINATE DEFLECTION CAUSED BY STOCK RUBBER BUSHINGS MALIBU $ MONTE CARLO $ MUSTANG $ MUSTANG $ REGAL $ REGAL $ TRANS AM FIREBIRD $ METRIC TRAILING ARM $

34 lower control arms UMP lower control arms & parts the best fabricated lower on the market! CHEVELLE and nova STYLE UMP LOWERs WITH MONOBALL PIVOTS - ump legal R $ ea. UMP LOWER TO FIT CHEVELLE - RIGHT STOCK BALL JOINT L $ ea. UMP LOWER TO FIT CHEVELLE - LEFT STOCK BALL JOINT L LARGE SCREW-IN BALL JOINT L/H R LARGE SCREW-IN BALL JOINT R/H L LARGE PRESS-IN BALL JOINT L/H R LARGE PRESS-IN BALL JOINT R/H L SMALL METRIC PRESS-IN BALL JOINT L/H R SMALL METRIC PRESS-IN BALL JOINT R/H L SMALL SCREW-IN BALL JOINT L/H R SMALL SCREW-IN BALL JOINT R/H L SMALL IMPALA PRESS-IN BALL JOINT 3/8" TALLER STUD L/H R also available for ub machine s adjustable monoball with interchangeable studs - # UMP LEGAL R $ ea. UMP LOWER TO FIT NOVA OR CAMARO - RIGHT - STOCK BALL JOINT L $ ea. UMP LOWER TO FIT NOVA OR CAMARO - LEFT - STOCK BALL JOINT NOTE: UMP STICKERS ARE AVAILABLE FOR AN ADDITIONAL $10 EACH. SMALL IMPALA PRESS-IN BALL JOINT 3/8" TALLER STUD R/H L LARGE SCREW-IN BALL JOINT L/H R LARGE SCREW-IN BALL JOINT R/H L LARGE PRESS-IN BALL JOINT L/H R LARGE PRESS-IN BALL JOINT R/H L SMALL METRIC PRESS-IN BALL JOINT L/H R SMALL METRIC PRESS-IN BALL JOINT R/H L SMALL SCREW-IN BALL JOINT L/H R SMALL SCREW-IN BALL JOINT R/H L SMALL IMPALA PRESS-IN BALL JOINT 3/8" TALLER STUD L/H R SMALL IMPALA PRESS-IN BALL JOINT 3/8" TALLER STUD R/H

35 lower control arms stock replacement Lower control arms & parts RS $ ea. STOCK LOWER TO FIT CHEVELLE RIGHT - STOCK BALL JOINT - STOCK SHOCK & SWAY BAR MOUNT LS $ ea. STOCK LOWER TO FIT CHEVELLE LEFT - STOCK BALL JOINT - STOCK SHOCK & SWAY BAR MOUNT RS $ ea. STOCK LOWER TO FIT NOVA OR CAMARO - RIGHT - STOCK BALL JOINT - STOCK SHOCK & SWAY BAR MOUNT LS $ ea. STOCK LOWER TO FIT NOVA OR CAMARO - LEFT - STOCK BALL JOINT - STOCK SHOCK & SWAY BAR MOUNT REPLACEMENT PARTS FOR LOWER CONTROL ARMS BIG COIL WELDED SPRING SEAT $ MONOBALL HOUSING 3/4" FOR METRIC TRAILING ARM PIVOTS $ SNAP RING FOR COM-12 $ A STEP SPACER 5/8" LONG, 1/2" HOLE $ A STEP SPACER 1/2" ID x 3/4" STEP x 8/20" LONG, 1/2" HOLE $ A STEP SPACER 1-5/8" LONG, 1/2" HOLE $ A $3.00 ea. STEP SPACER 5/8" LONG, 1/2" HOLE - ALUM A $3.00 ea. STEP SPACER 1-5/8" LONG, 1/2" HOLE - ALUM $12.80 ea. BIG COIL WELDED SPRING SEAT 35

36 coil OVER parts $8.50 ea $13.70 ea. FLAT SHOCK TOP - PRO SPRING SPACER 1-1/2" $38.00 ea. ADJUSTABLE COIL OVER MOUNT coil for 5" & 5-1/2" springs $12.80 ea. BIG COIL WELDED SPRING SEAT $30.00 ea. SPRING BUCKET 1" x 8 THREAD A JACK SCREW PLATE (COARSE THREAD) 6-1/4" DIAMETER, 1" x 8 THREAD B $7.50 ea. JACK SCREW PLATE 5" DIAMETER WITH 1" x 8 THREADED BOSS C JACK SCREW PLATE 5" DIAMETER WITH 3/4" x 10 THREADED BOSS $8.00 ea. $7.50 ea $4.60 ea. JACK SCREW PLATE 5" DIAMETER 3/16" THICK - WITHOUT THREADED BOSS $5.30 ea. JACK SCREW PLATE 6" DIAMETER 3/16" THICK - WITHOUT THREADED BOSS AVAILABLE IN 5" OR 6-1/4" DIAMETER

37 coil for 5" & 5-1/2" springs B SPRING SEAT CAGE D $6.00 ea. $3.00 ea $9.15 ea. UPPER SPRING SEAT $13.30 ea. OFFSET LOWER SPRING SEAT $9.60 ea. LOWER SPRING SEAT $41.40 ea. ADJUSTABLE COIL SPRING SPACER SPRING SEAT RING A $12.00 ea. UPPER SPRING SEAT WITH SOLID BOTTOM AND 1/2" x 20 WELD NUT $17.00 ea. NON-ADJUSTABLE COIL SPRING SPACER 37

38 coil for 5" & 5-1/2" springs OUR STEEL JACK BOLTS ARE GUN DRILLED TO PRODUCE THE LIGHTEST ON THE MARKET $12.00 ea. WEIGHT JACK BOLT 8" - STEEL $12.80 ea. WEIGHT JACK BOLT 11" - STEEL $15.00 ea. WEIGHT JACK BOLT 14" - STEEL $13.70 ea. WEIGHT JACK BOLT 8" - ALUMINUM $15.20 ea $8.50 ea. WEIGHT JACK BOLT 11" - ALUMINUM WEIGHT JACK BOLT 3/4" DIAMETER, 8" LONG - STEEL $4.00 ea. JACK BOLT BOSS $4.00 ea. WEIGHT JACK BOSS FOR BOLT, 3/4" THREAD $6.50 ea. JACK BOLT BOSS - 1" THREAD, 2" LONG $6.00 ea. U-BOLT 3" x 8" $1.00 ea. HIGH NUT 38

39 coil for 5" & 5-1/2" springs $8.00 ea. SPRING PERCH FOR 3" TUBE $22.00/set* SPRING SHACKLES ADJ STEEL $24.20/set* SPRING SHACKLES ADJ ALUMINUM - GOLD *4 IN A SET $34.50 ea. SPRING SLIDER ASSEMBLY $3.20 ea. NYLON BLOCKS $1.90 ea. 1/2" -13 x 4-3/4" SLIDER BOLT $0.60 ea. LOCK NUT $2.00 ea. NYLON WASHER FOR LEAF SPRING $13.30 ea. NYLON FRONT LEAF SPRING BUSHING - 3 PC $25.50 ea. CLAMP-ON SPRING PAD FOR 3" TUBE OUR SLIDERS REQUIRE NO GREASE THAT ATTRACTS DIRT. THESE WILL NOT BIND UP AS DO THE BEARING TYPE, REQUIRING NOTHING MORE THAN A SIMPLE HOSING $3.90 ea. NYLON REAR LEAF SPRING BUSHING - 1 PC $5.30 ea. NYLON SPRING BUSHING - 1 PC - 1-1/2" x 2-1/2" 39

40 UPPER COIL OVER SHOCK MOUNTS - ANGLED STYLE UPPER COIL OVER SHOCK MOUNTS - STRAIGHT, SHORT UPPER COIL OVER SHOCK MOUNTS - STRAIGHT, LONG (RIGHT) $7.20 ea (LEFT) $7.20 ea (RIGHT) $4.80 ea (LEFT) $4.80 ea. 3" (RIGHT) $7.20 ea (LEFT) $7.20 ea. SHOCK MOUNTS $1.80 ea. UPPER COIL OVER SHOCK MOUNT WITH RIGIDITY BAR MOUNT $10.40 ea. SHOCK AND RIGIDITY BAR MOUNT, LONG $4.80 ea $4.80 ea. LOWER COIL OVER MOUNT - UNIVERSAL, WIDE LOWER COIL OVER MOUNT - UNIVERSAL, SHORT, NARROW QP $4.50 ea. SHOCK PIN FOR WIDE SHOCK MOUNT $1.10 ea. RETAINER CLIP ONLY

41 3-1/2" 2" $15.90 ea. 5TH COIL MOUNT, CLAMP-ON, LONG ROUND TUBE CLAMP-ON SHOCK MOUNTS ROUND TUBE CLAMP-ON WEIGHT MOUNTS square tube clamps SHOCK MOUNTS /4" TUBE $ /2" TUBE $ /4" TUBE $ " TUBE or 2" x 3" $ $23.00 ea. 3 BOLT CLAMP-ON SHOCK MOUNT FOR 1-3/4" TUBE 2" OFFSET (4" BOLT) $23.00 ea. 3 BOLT CLAMP-ON SHOCK MOUNT FOR 1-3/4" TUBE 3" OFFSET (5-1/2" BOLT) $17.00 ea. 3 BOLT CLAMP-ON SHOCK MOUNT FOR 1-1/2" TUBE 2" OFFSET (4" BOLT) " TUBE $ /4" TUBE $ /2" TUBE $ /2" TUBE, 90 DEGREE $ /4" TUBE $ " TUBE $ B FLAT MT 1-1/2" TUBE $ /2" TUBE $ /4" TUBE $ /4" TUBE $ " TUBE $10.60 WEIGHT MOUNTS /2" TUBE $ /4" TUBE $ /4" TUBE $ " TUBE $ A 2" x 2" CLAMP ONLY $ " x 2" CLAMP ONLY $

42 REAR SHOCK MOUNTS $20.70 ea. LOWER COIL OVER SHOCK MOUNT - FOR MONO LEAF SPRINGS SHOCK MOUNT SPACERS 4-3/4" $45.60 ea. LOWER COIL OVER SHOCK MOUNT - CLAMP-ON, 5" LONG $45.60 ea. LOWER COIL OVER SHOCK MOUNT - CLAMP-ON, 7" LONG $7.50 ea. 5" RECT WELD-ON SHOCK MOUNT WITH BOSS $8.30 ea. 7" RECT WELD-ON SHOCK MOUNT WITH BOSS $2.50 ea. TAPERED SHOCK MOUNT WITH TAPPED 1/2" HOLE $1.30 ea $1.30 ea $1.30 ea. 1/2" ID x 3/4" OD x.25" LONG 1/2" ID x 3/4" OD x.50" LONG 1/2" ID x 3/4" OD x.75" LONG

43 $9.00 ea $8.50 ea. STEERING COLUMN MOUNT RACK & PINION MOUNT - DIE FORMED $8.50 ea. NARROW RACK PLATE- FORMED $12.50 ea. RACK SHIM PLATE 1/4" THICK $16.20 ea. RACK SHIM PLATE 1/2" THICK $19.70 ea. FIREWALL BEARING FOR STEERING SHAFT $31.80 ea. QUICK RELEASE HUB $3.80 ea. PINTO RACK & PINION MOUNT, RIGHT $3.80 ea. PINTO RACK & PINION MOUNT, LEFT $3.50/ft. 3/4" STEERING SHAFT (SOLD BY FOOT) $9.10 ea. STUB SHAFT FOR QR HUB (HEX) $14.10 ea $1.40 ea. 3/4" OVERSIZED HEIM FOR STEERING SHAFT SHORT STEERING SHAFT SUPPORT 43

44 COUPLERS $10.00 ea. STEERING COUPLER - PINTO MALE $10.00 ea. STEERING COUPLER - PINTO FEMALE PART # DESCRIPTION PRICE/EA /4" x 48 SPLINE RACK $ /16" x 26 SPLINE RACK - MALE (PINTO) $ /16" x 26 SPLINE RACK - FEMALE (PINTO) $ /4" x 30 SPLINE RACK (METRIC) $ /4" x 36 SPLINE RACK (QUICKNER) $ /16" x 36 SPLINE RACK $17.00 U-JOINTS Quality Borgeson and sweet U-joints PART # MANUFACTURER DESCRIPTION PRICE/EA BORGESON 3/4" x 3/4" PLAIN, BOTH ENDS 1" OD $ BORGESON 3/4" x 3/4" PLAIN, BOTH ENDS 1-1/4" OD $ BORGESON 3/4" x 48" SWEET, RACK & PINION, APPLETON, MANUAL $ BORGESON 3/4" x 36" GM MANUAL, 76 AND BEFORE PINTO PS $ BORGESON 13/36" x 36" 76 AND BEFORE GM PS $ BORGESON 3/4" x 30" 77 AND UP GM PS AND APPLETON PS $ BORGESON 9/16" x 26" 1-1/4" OD PINTO MANUAL $ BORGESON 9/16" x 26" 1" OD PINTO MANUAL $ BORGESON 5/8" x 36" VEGA $ SWEET 3/4" x 3/4" PLAIN, BOTH ENDS $ SWEET 3/4" BORE x 3/4" x 48" SPLINE $ SWEET 3/4" BORE x 3/4" x 36" SPLINE $ SWEET 13/36" x 36" 76 AND BEFORE GM PS $ SWEET 3/4" BORE x 3/4" x 30" SPLINE $50.90

45 STEERING LINKAGE $20.00 ea $7.00 ea. INNER TIE ROD - FITS MOST RACK & PINION CARS TIE ROD SLEEVE - DRAG RACING 12" LONG 3/4" OD 7/16" x 20 RH ON ONE END 3-3/8" 4-5/8" $17.00 ea $17.00 ea. STUD - FITS INNER END OF RACK FOR 5/8" ROD END, IMPALA DRAGLINK AND SPINDLE STUD - PINTO TIE ROD END $5.30 ea. BUMP STEER SPACER KIT - 4 SPACERS AND 1 BOLT $13.30 ea. TOE ADJUSTER 5/8" LEFT HAND MALE AND 5/8" RIGHT HAND FEMALE $14.90 ea. TOE ADJUSTER 3/4" LEFT HAND MALE AND 3/4" RIGHT HAND FEMALE BUMP STEER SPACER.030 THICK $ BUMP STEER SPACER.060 THICK $ BUMP STEER SPACER.100 THICK $ BUMP STEER SPACER.200 THICK $ BUMP STEER SPACER.300 THICK $ BUMP STEER SPACER.500 THICK $ BUMP STEER SPACER.800 THICK $

46 stabilizer bars & parts stabilizer BARS SWAy BAR ADJUSTERS - measured by overall length " $ /16" $ /8" $ /4" $ $12.50 ea $13.20 ea. EYE BOLT - SHORT, LEFT 8-1/2" LONG WITH 1-3/8" EYE $17.90 ea. EYE BOLT - SHORT, LEFT, ALUMINUM 8-7/8" LONG WITH 1-1/2" EYE EYE BOLT - LONG, RIGHT 11-1/2" LONG WITH 1-3/8" EYE $13.30 ea. EYE BOLT, LONG 11-1/2" LONG WITH 1-5/8" EYE $19.40 ea. EYE BOLT - LONG, RIGHT, ALUMINUM 12" LONG WITH 1-1/2" EYE $10.10 ea. EYE BOLT - STEEL 3/4" x /8" LONG WITH 1-3/8" EYE R ADJUSTER NUT $1.30 ea (FOR 1-1/4" BAR) $45.00 ea. EASY ACCESS SWAY BAR ADJUSTER - RETRO KIT (FOR 1-3/8" BAR) $45.00 ea. EASY ACCESS SWAY BAR ADJUSTER - RETRO KIT, 1-5/8" EYE (FOR METRIC CHASSIS) $53.00 ea. EASY ACCESS SWAY BAR ADJUSTER - RETRO KIT CONVENIENTLY FITS EXISTING TUBE. SPRING LOADED DETENT ELIMINATES THE NEED FOR JAM NUTS. EASILY REMOVABLE EYE FOR QUICK SWAY BAR CHANGES. 3/4" HEX SOCKET IS THE ONLY TOOL REQUIRED TO MAKE ADJUSTMENTS AND IT S IMCA LEGAL. REPLACEMENT PARTS AVAILABLE PART # DESCRIPTION PRICE/EA " ADJUSTER SCREW $ EYE FOR 1-1/4" BAR $ EYE FOR 1-5/8" BAR $ THREAD INSERT 3/4-10 $ D THREAD INSERT 3/4-10 DETENT $ RETAINER CLIP $ " ADJUSTER ROD $17.00

47 ball joints lower ball joints $33.40 ea. LARGE SCREW-IN, MOOG (K-727) $20.30 ea IMPALA PRESS-IN (K-6117), 3/8" LONGER THAN STOCK $55.20 ea. MONOBALL BALL JOINT ASSEMBLY FOR LARGE PRESS-IN $20.70 ea. MONOBALL JOINT ADAPTER HOUSING FOR LARGE GM PRESS-IN $21.20 ea. LARGE PRESS-IN, MOOG (K-6141) $17.40 ea. SMALL PRESS-IN, S-10, MOOG (K-6145) $19.90 ea CHEVELLE/67-69 CAMARO STOCK LOWER BALL JOINT (K-5103) $55.20 ea. MONOBALL JOINT KIT FOR CHEVELLE $20.70 ea. ADAPTER HOUSING FOR CHEVELLE $55.20 ea. MONOBALL JOINT KIT FOR FULL SIZE FORD $20.70 ea. MONOBALL JOINT ADAPTER HOUSING FOR FULL SIZE FORD 47

48 ball joints upper ball joints $22.80 ea. MOOG (K-6024), 4 BOLT STANDARD MB $67.40 ea. MONOBALL JOINT KIT - REPLACES SMALL SCREW-IN BALL JOINT A $26.90 ea. 4-BOLT (K-6136), 3/8" LONGER THAN STOCK $9.00 ea. LARGE SCREW-IN $9.00 ea. SMALL SCREW-IN $31.80 ea. MONOBALL ADAPTER HOUSING FOR SMALL SCREW-IN BALL JOINT ball joint sleeves $9.10 ea. LARGE SCREW-IN, 1-3/8" LONG $19.70 ea. SMALL SCREW-IN, SMALL STUD MOOG (K-772) $32.10 ea. SMALL SCREW-IN, LARGE STUD MOOG (K-719) $17.30 ea. BALL JOINT, UPPER 4-BOLT (K-1268) UPPER CAMARO $67.40 ea. MONOBALL BALL JOINT ASSEMBLY, HI-MISALIGNMENT

49 ball joints ball joint sleeves PART # BALL JOINT SLEEVE FOR: PRICE/EA CAMARO, IMPALA, CHEVELLE, MONTE CARLO, S-10 #K-6145, #MQN-FA921, #TRW " DIAMETER x 1" TALL $ IMPALA #K-6141, #MQN-FA692, #TRW " DIAMETER x 1" TALL $ IMPALA #K-6141, MQN-FA692, #TRW " DIAMETER x 1-3/8" TALL $ CAMARO, CHEVELLE, NOVA #K-5103, #MQN-FA993, #TRW " DIAMETER x 1-1/4" TALL $ CAMARO, IMPALA, CHEVELLE, MONTE CARLO, S-10 #K-6145, #MQN-FA921, #TRW " DIAMETER x 1-1/4" TALL $ DODGE TRUCK #K-7025, #MQN-FA598, #TRW " DIAMETER x 1" TALL $ GMC TRUCK #K-6117, MQN-FA1014, #TRW " DIAMETER x 1" TALL $ $30.00 ea. SMALL SCREW-IN BALL JOINT SOCKET $30.00 ea. LARGE SCREW-IN BALL JOINT SOCKET monoball pins 5-1/2" 4-11/16" 4-3/8" 4-7/8" 5" $18.60 ea. STUD FOR GM PRESS-IN 3/8" LONGER & 3/4" ADJUSTMENT $17.00 ea. STUD FOR LARGE SCREW-IN $17.00 ea. STUD FOR UPPER 3/4" MONOBALL A $17.00 ea. STUD FOR UPPER 5/8" HI-MISALIGNMENT MONOBALL $17.00 ea. STUD FOR LOWER 3/4" MONOBALL 49

50 monoball pins 4-13/16" ball joints $17.00 ea. STUD FOR METRIC TIE ROD END 4-1/2" /4" 4-3/8" 3-3/8" 4-5/8" 4-9/16" 5" 4-3/4" 3-1/4" $17.00 ea. STUD FOR GM PRESS-IN $18.60 ea. SAME AS STUD FOR GM PRESS-IN, 3/4" LONGER $18.10 ea. STUD FOR S-10 LOWER $17.00 ea. STUD - FITS INNER END OF RACK FOR 5/8" ROD END, IMPALA DRAGLINK AND SPINDLE $17.00 ea. STUD FOR PINTO TIE ROD END $17.00 ea. STUD FOR METRIC UPPER - 5/8" MONOBALL $17.00 ea. STUD FOR METRIC LOWER BALL JOINT - 3/4" MONOBALL $17.00 ea. STUD FOR CHEVELLE LOWER - 3/4" MONOBALL $18.10 ea. STUD FOR CHEVETTE SPINDLE

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

52 TIE RODS THESE ARE JUST THE POPULAR SIZES WE STOCK. IF YOU DON T SEE WHAT YOU ARE LOOKING FOR, PLEASE CALL - WE CAN BUILD IT. 52 LENGTH 1/2" THREAD 3/4" x.065" 5/8" THREAD 7/8" x.095" 5/8" THREAD 1" x.095" 5/8" RH, 11/16" LH 1" x.095" 3.5" C $7.00 4" C $ C $ " CB $ " C $7.20 5" E $ C $ C $ " C $ C $8.10 6" E $ C $ C $ CB $ " C $ C $8.75 7" E $ C $ C $ CB $ " C $8.55 8" E $ C $ C $9.65 9" E $ C $ C $ CB $ " C $ " E $ C $ C $ CB $ " E $ C $ C $ CB $ " C $ " E $ C $ C $ " E $ C $ C $ " E $ C $ C $ " C $ " E $ C $ C $ " E $ C $ C $ " E $ C $ C $ " E $ C $ C $ " E $ C $ C $ " C $ C $ " E $ C $ C $ " E $ C $ C $ " E $ C $ C $ " E $ C $ C $ " E $ C $ C $ " E $ C $ C $ " E $ C $ C $ " E $ C $ C $ " E** $ " E $ C $ C $ " C $ C $ " E $ C $ " E $ " C $ " C $ " C $26.85 **THESE ARE AVAILABLE IN 7/8" DIAMETER x.095"

53 SPINDLES & SPINDLE PARTS $25.00 ea. SPINDLE NUT SOCKET FITS WIDE 5, 5 x 5, HOWE, VOGEL, AND PCR TYPE SPINDLES $34.50 ea. WIDE 5 SPINDLE SNOUT $5.30 ea. BUMP STEER SPACER KIT 4 SPACERS AND 1 BOLT 5/8 ID" TAPERED BUSHING FOR LA RGE SCREW-IN BA LL JOINT TAPERED BUSHING FOR L A RG E PRES S-IN B A LL JO INT TAPERED BUSHING FOR UPPER BA LL JOINT 5/8 ID" $7.40 $7.40 $ BUMP STEER SPACER.030 THICK $ BUMP STEER SPACER.060 THICK $ BUMP STEER SPACER.100 THICK $ BUMP STEER SPACER.200 THICK $ BUMP STEER SPACER.300 THICK $ BUMP STEER SPACER.500 THICK $ BUMP STEER SPACER.800 THICK $ /8" $9.60 ea. BUMP STEER SPACER FOR PINTO SPINDLE $4.40 ea. BOSS SPINDLE STEERING ARM R L DIRT SPINDLES $12.20 ea. $12.20 ea. SPINDLE SAVER - METRIC SPINDLE (RIGHT AND LEFT SOLD SEPARATELY) $ ea. RT W/XL OR SL ON 11-3/4" x 1-1/4" ROTOR (RIGHT) $ ea (LEFT) $ ea. MUSTANG II PINTO SPINDLES RT W/DL OR MINI GN ON 11-3/4" x 1-1/4" ROTOR LT W/XL OR SL ON 11-3/4" x 1-1/4" ROTOR LT W/DL OR MINI GN ON 11-3/4" x 1-1/4" ROTOR $ $ $ ALL OF OUR SPINDLES ARE BUILT WITH HIGH FORM ALLOY MATERIALS, GIVING GREATER STRENGTH WITH LESS WEIGHT. 53

54 FLOATER PARTS FLOATER 2" LONG $ FLOATER 2-1/2" LONG $ FLOATER 3" LONG $ FLOATER 4" LONG $ FLOATER 5" LONG $ FLOATER 7" LONG $ $4.30 ea. BIRDCAGE LOCKUP TAB $14.90 ea. BIRDCAGE LOCKUP CLAMP $4.30 ea. FLOATER TAB RETAINER CLAMP 3-1/4" OD $ RETAINER CLAMP 3-1/2" OD $ BEARING RETAINER CLAMP 5/8" LONG $ BEARING RETAINER CLAMP 1" LONG $13.75 A FLOATER BRACKET, 1/8" THICK $3.20 B SWING ARM FLOATER BRACKET $6.70 C FLOATER SHOCK MOUNT $14.90 D D B FLOATER BRACKET, 3/16" THICK, 3/4" HOLE $4.30 FLOATER BRACKET, 3/16" THICK, 5/8" HOLE $ $18.60 ea. LIFT BAR STABILIZER A B C D $62.10 ea. CLAMP-ON COIL SPRING SHOCK TRAILING ARM MOUNT $90.00 ea. SPRING AND SHOCK FLOATER WITH LOCK UP TABS $41.90 ea. WELD-ON SHOCK AND COIL OVER ELMINATOR MOUNT

55 TUBE clamps Rear Suspension Parts PART # DESCRIPTION PRICE/EA PC 2 BOLT CLAMP 3" ID x 3-1/2" OD x 1" WIDE $ BOLT PINCH CLAMP 3" ID x 3-1/2" OD x 1" WIDE $ BOLT CLAMP 3" ID x 3-1/2" OD x 3-1/4" WIDE - 3/8" BOLT $ BOLT PINCH CLAMP 3" ID x 3-1/4" OD x 2" WIDE $ BOLT PINCH CLAMP 3" ID x 3-1/4" OD x 2-1/2" WIDE $ BOLT PINCH CLAMP 3" ID x 3-1/4" OD x 3-1/2" WIDE $ BOLT PINCH CLAMP 3" ID x 3-1/2" OD x 2" WIDE $ PC 2 BOLT CLAMP 3" ID x 3-1/4" OD x 2" WIDE $ PC 2 BOLT CLAMP 3" ID x 3-1/2" OD x 1" WIDE $ PC 2 BOLT CLAMP 3" ID x 3-1/2" OD x 1-1/2" WIDE $ PC 4 BOLT CLAMP 3" ID x 3-3/8" OD x 3" WIDE $ PC 2 BOLT CLAMP 3" ID x 3-1/2" OD x 2" WIDE $ PC 4 BOLT CLAMP 3" ID x 3-1/2" OD x 3" WIDE $ PC 4 BOLT CLAMP 3" ID x 3-1/2" OD x 3" WIDE $ PC 4 BOLT CLAMP 3" ID x 3-1/4" OD x 3-1/4" WIDE $ PC 2 BOLT CLAMP 1" ID x 1-3/4" WIDE $ PC 2 BOLT CLAMP 1" ID x 2" WIDE $ PC 2 BOLT CLAMP 1-1/4" ID x 1-3/4" WIDE $ PC 2 BOLT CLAMP 1-1/4" ID x 2" WIDE $ PC 2 BOLT CLAMP 1-1/2" ID x 1-3/4" WIDE $ PC 2 BOLT CLAMP 1-1/2" ID x 2" WIDE $ PC 2 BOLT CLAMP 1-3/4" ID x 1" WIDE - 1/4" BOLTS $ PC 4 BOLT CLAMP 1-1/2" ID x 2-1/2" WIDE $ PC 2 BOLT CLAMP 1-3/4" ID x 1-3/4" WIDE $ PC 2 BOLT CLAMP 1-3/4" ID x 2" WIDE $ PC 2 BOLT CLAMP 2" ID x 1-3/4" WIDE $ $25.00 ea. 2 BOLT PINCH CLAMP 3" ID x 3-1/4" OD x 3-1/2" WIDE $12.50 ea. 2 PC 2 BOLT CLAMP 3" ID x 3-1/4" OD x 2" WIDE $15.70 ea $18.60 ea. 2 PC 2 BOLT CLAMP 3" ID x 3-1/2" OD x 2" WIDE 2 PC 4 BOLT CLAMP 3" ID x 3-1/2" OD x 3" WIDE 55

56 parts R $90.10 ea L $90.10 ea. SPRING AND SHOCK MOUNT - CLAMP-ON $ ea. FLOATER SPRING AND SHOCK MOUNT - RIGHT SIDE (PIERCE CARS) 7-3/4" $90.10 ea. SPRING, SHOCK AND TRAILING ARM MOUNT - CLAMP-ON bolt pattern on 18" radius for the following brackets: $53.00 ea. TRAILING ARM MOUNT, CLAMP-ON HOLE TRAILING ARM MOUNT, 1/8" THICK, 3/4" HOLES $ B 5 HOLE TRAILING ARM MOUNT, 1/8" THICK, 5/8" HOLES $ HOLE TRAILING ARM MOUNT, 1/8" THICK, 3/4" HOLES $ A 6 HOLE TRAILING ARM MOUNT, 1/8" THICK, 1/2" HOLES $ B 6 HOLE TRAILING ARM MOUNT, 1/8" THICK, 5/8" HOLES $ C 6 HOLE TRAILING ARM MOUNT, 1/4" THICK, 3/4" HOLES $ $6.70 ea. FRONT TRAILING ARM MOUNT, 1/2" HOLES $5.60 ea. TRAILING ARM MOUNT 1/2" SLOT $18.10 ea. SLOTTED TRAILING ARM MOUNT $15.90 ea. SLOTTED C-LINK MOUNT 56

57 parts $14.40 ea. 4 LINK BOLT $4.50 ea. LEAF SPRING FRONT MOUNT, 5/8" HOLES $2.75 ea. PULL BAR TAB REAR UPPER BUSHING FOR IMPALA (1 PAIR) $ TRAILING ARM PIVOT KIT FOR CHEVELLE (254) $63.60 USES (2) A LOWER TRAILING ARM PIVOT KIT FOR CAPRICE $84.80 USES (2) A UPPER TRAILING ARM PIVOT KIT FOR CAPRICE $84.80 USES (1) A AND (1) A UPPER TRAILING ARM PIVOT KIT FOR CAPRICE $84.80 USES (1) A AND (1) A METRIC TRAILING ARM PIVOT KIT $ $ pr. METRIC UPPER TRAILING ARM MOUNTS REAR WITH MONOBALL BEARING (PAIR) $29.70 pr. METRIC LOWER TRAILING ARM MOUNTS REAR (PAIR) A $25.50 pr. METRIC UPPER TRAILING ARM MOUNTS REAR WITHOUT BUSHING (PAIR) B STEEL SLEEVE FOR METRIC TRAILING ARM BUSHING KIT $13.30 ea. $55.20 ea. METRIC TRAILING ARM MOUNTS - UPPER AND LOWER (KIT) - INCLUDES A AND

58 parts panhard bars - MEASURED CENTER TO CENTER /2" $70.00 ea. 25-1/2" PANHARD BAR WITH HEIM 32" $76.90 ea. ASPHALT 32" PANHARD BAR WITH HEIM 21-1/2" $74.80 ea. DIRT 90 PANHARD BAR WITH 3/4" HEIM, MONOBALL AND SNAP RING INCLUDED panhard bar REPLACEMENT PARTS PART # DESCRIPTION PRICE/EA SLIDER BOLT $ RUBBER BUSHING $ /2" WASHER $ FINE THREAD PANHARD BAR ADJ $ /4" MONOBALL $ MONOBALL HOUSING 3/4" $ " $ " $ " $ " $ " $ " $ " $ $89.50 ea. PANHARD BAR 1-1/4 DOUBLE BEND WITHOUT BEARINGS $ ea. ENERGY ABSORBING PANHARD BAR (KIT) $ ea. ENERGY ABSORBING PANHARD BAR 90 (KIT) $11.20 ea. RUBBER BUSHING $14.10 ea. FINE THREAD PANHARD BAR ADJUSTER

59 parts PANHARD BAR MOUNTS $27.20 ea. HAWK PINION MOUNT, ALUMINUM $30.80 ea. HAWK PINION MOUNT, STEEL W/BRACKET $29.60 ea. QC PINION MOUNT, ALUMINUM, 2 HOLE $35.00 ea. QC PINION MOUNT, ALUMINUM, 4 HOLE O-RING INCLUDED, SERRATED 1/4" INCREMENTS $ ea $ ea. ADJUSTABLE PANHARD BAR MOUNT FOR QUICK CHANGE - WITH SEAL DOUBLE ADJUSTABLE PANHARD BAR MOUNT WITH SEAL $38.20 ea. QUICK CHANGE PINION MOUNT - ALUMINUM, LEFT AND RIGHT $25.50 ea. PANHARD BAR MOUNT FOR 9" FORD, STEEL A $25.50 ea. PANHARD BAR MOUNT FOR 9" FORD, ALUM $39.80 ea. QUICK CHANGE PINION MOUNT - STEEL, DOUBLE $38.20 ea. FORD PINION MOUNT, STEEL, LT & RT $38.20 ea. FORD PINION MOUNT, ALUMINUM, LT & RT 59

60 parts PANHARD BAR MOUNTS $57.30 ea. REVERSIBLE PANHARD BAR MOUNT FOR 9" FORD, 1/4" ADJUSTMENT A 6-1/2" $34.50 ea. PANHARD BAR MOUNT FOR 3" AXLE TUBES $6.40 ea. TANG WASHER FOR PANHARD BAR MOUNT $4.70 ea. TANG WASHER FOR SHORT PANHARD BAR MOUNT $63.60 ea. DOUBLE SIDED PANHARD BAR MOUNT FOR 9" FORD - RADIUSED $ ea. PRO SERIES DOUBLE SLOTTED PANHARD BAR MOUNT FOR QC WITH SEAL $69.75 ea. QUICK CHANGE PINION MOUNT - ALUMINUM $82.70 ea. PANHARD BAR MOUNT FOR LEFT SIDE, FRONT OF QC - CLAMP-ON 60

61 serrated blocks and plates parts ALL UB SERRATED BLOCKS AND PLATES ARE 1/4" ADJUSTMENT A 3/4" HOLE $ B 5/8" HOLE $ C 3/4" HOLE W/SIDES $15.90 PANHARD BAR MOUNTS $95.00 ea. ANGLED AXLE MOUNT, ABOVE CENTERLINE - 4 BOLT - ADJUSTABLE PICTURE NOT YET AVAILABLE $ ea. ADJUSTABLE PANHARD BAR MOUNT - AXLE END $23.40 ea. SERRATED PLATE 1/2" x 2" x 6" WITH 3/4" SLOT WITH 1/4" SPACING $23.40 ea. SERRATED PLATE 1/2" x 2" x 6" WITH 5/8" SLOT WITH 1/4" SPACING $90.10 ea. PANHARD BAR MOUNT FOR REAR SIDE OF QC - ADJUSTABLE - LONG $82.70 ea. PANHARD BAR MOUNT FOR REAR SIDE OF 9" FORD - ADJUSTABLE - SHORT A $8.30 ea. SIDE PLATE FOR PANHARD BAR MT PICTURE NOT YET AVAILABLE $ ea. ADJUSTABLE PANHARD BAR MOUNT - FRAME END 61

62 parts PANHARD BAR MOUNTS $18.60 ea. PANHARD BAR MOUNT FRAME END 1-3/4" $18.60 ea. PANHARD BAR MOUNT FRAME END 1-1/2" round tube square tube PART # DESCRIPTION PRICE/EA PANHARD BAR MOUNT - $26.50 FRAME END FOR 1-1/2" x 1-1/2" SQUARE PANHARD BAR MOUNT - $26.50 FRAME END FOR 1-3/4" x 1-3/4" PANHARD BAR MOUNT - $44.60 FRAME END FOR 1-3/4" x 1-3/4" WITH ADJUSTER PANHARD BAR MOUNT - $26.50 FRAME END FOR 2" x 2" PANHARD BAR MOUNT - FRAME END FOR 2" x 2" WITH ADJUSTER $ $44.60 ea. PANHARD BAR BRACKET 1-3/4" W/BOSS $44.60 ea. PANHARD BAR BRACKET 1-1/2" W/ADJ BOSS PART # DESCRIPTION PRICE/EA CLAMP FOR 1-1/4" TUBE, 1/2" ROD END $ CLAMP FOR 1-1/4" TUBE, 5/8" ROD END $ CLAMP FOR 1-1/2" TUBE, 1/2" ROD END $ CLAMP FOR 1-1/2" TUBE, 5/8" OR 3/4" ROD END $ HD 4 BOLT CLAMP FOR 1-1/2" TUBE, 5/8" OR 3/4" ROD END $ CLAMP FOR 1-3/4" TUBE, 1/2" ROD END $ CLAMP FOR 1-3/4" TUBE, 5/8" OR 3/4" ROD END $ HD 4 BOLT CLAMP FOR 1-3/4" TUBE, 5/8" OR 3/4" ROD END $ $26.50 ea. 1-1/2" Z-LINK CLAMP, 5/8" BOLT $1.60 ea. TAB FOR PANHARD BAR MOUNT 5/8" HOLE

63 parts PANHARD BAR MOUNTS FOR 2" SQUARE - ALUMINUM $ FOR 1-1/2" SQUARE - STEEL $ FOR 1-3/4" SQUARE - STEEL $ FOR 2" SQUARE - STEEL $ $ ea. CLAMP-ON 2" x 2" - DOUBLE ANGLE CENTER SECTION BRACKETS REPLACEMENT PARTS FOR PART # DESCRIPTION PRICE/EA PIVOT WASHER $ SMALL PLATE $ LARGE SNUBBER PLATE $ MONOBALL PIVOT $ STUD $ RUBBER SPRING $ " WASHER $ SPACER 4-3/4" LONG 1/2" ID $ B $9.90 ea. 3/4" x 10 OVAL NUT FOR PANHARD MOUNT $ ea. THIRD LINK TORQUE ABSORBER KIT $16.50 ea. SNUBBER MOUNT BRKT RIGHT SIDE -LONG $15.40 ea. SNUBBER MOUNT BRKT LEFT SIDE -SHORT 63

64 CENTER SECTION BRACKETS parts WITH A TEMPLATE OR PRINT, CUSTOM BRACKETS MAY BE BUILT FOR A SLIGHT ADDITIONAL CHARGE $13.70 ea $15.80 ea $15.80 ea. CENTER SECTION BRACKET TALL WITH 2-3/4" HOLES CENTER SECTION BRACKET TALL WITH 4 HOLES CENTER SECTION BRACKET - GRAND AM SPACERS FOR CENTER SECTION BRACKETS* $15.90 ea. CENTER SECTION BRACKET FOR QUICK CHANGE - STEEL $24.75 ea. RUBBER TRAILING ARM END - RIGHT $9.60 ea. STUD - 3/4"-16 x 3" RH $21.80 ea. NYLON BUSHING END 3/4" RH X 1/2" $21.80 ea. NYLON BUSHING END 3/4" LH X 1/2" *SEE PAGE 93 FOR ADDITIONAL OPTIONS /2" LONG - STEEL $ /4" LONG - STEEL $ " LONG - STEEL $ /2" LONG - STEEL $ /16" LONG - STEEL $ $24.75 ea. RUBBER TRAILING ARM END - LEFT $9.60 ea. STUD - 3/4"-16 x 3" LH 64

65 parts SWING ARMS SWING ARMS ARE MEASURED FROM THE CENTER OF THE HEIM TO THE CENTER OF THE HEIM $47.70 ea. SWING ARM 14-1/2" CENTER TO CENTER 3/4" HEIM $47.70 ea $44.60 ea. SWING ARM 20-1/2" CENTER TO CENTER 3/4" HEIM 17" SWING ARM WITH 1/2" MB & 5/8" THREAD 9" $52.50 ea. SWING ARM BIRDCAGE 9" $56.00 ea. 4 BAR FLOATER WITH LOCK UP TABS $50.40 ea. RAYBURN BIRDCAGE $52.50 ea. SPEAR ROD WITH OFFSET 65

66 parts TORQUE ARM BRACKETS $8.00 ea $10.00 ea. TORQUE ARM BRACKET - 3 HOLE MOUNT TORQUE ARM BRACKET $14.25 ea $7.70 ea. LOWER TORQUE ARM BRACKET WITH 5/8" HOLE TORQUE ARM BRACKET 2 HOLE MOUNT WITH 5/8" HOLE $7.70 ea $6.50 ea. TORQUE ARM BRACKET - 2 HOLE MOUNT SPRING PLATE FOR TORQUE ARM TRACK LOCATOR BRACKETS /2" HOLE, 3/4" WIDTH $ /8" HOLE, 1" WIDTH $ /4" HOLE, 1-1/8" WIDTH $ /8" HOLE, 1-1/8" WIDTH $

67 ROD ENDS $13.80 ea. 5/8" x 18 RH CLEVIS, 3/8" HOLE, 3/8" SLOT $12.80 ea. 5/8" x 18 RH CLEVIS, 3/8" HOLE, 3/16" SLOT $12.70 ea $13.70 ea. 5/8" x 18 SOLID ROD END 5/8" SOLID ROD END, 3/4" HOLE $17.00 ea. 3/4" x 16 SOLID ROD END $13.30 ea. TOE ADJUSTER 5/8" LEFT HAND MALE AND 5/8" RIGHT HAND FEMALE $14.90 ea. TOE ADJUSTER 3/4" LEFT HAND MALE AND 3/4" RIGHT HAND FEMALE $10.50 ea. TURNBUCKLE 5/8" RH & LH THREADS $11.20 ea. TURNBUCKLE 3/4" RH & LH THREADS 67

68 ROD ENDS ROD ENDS (HEIM JOINTS) SIZE HOLE/THREAD/HAND ECONOM Y MALE 1/4" 1/4" RH $4.30 1/4" 1/4" LH $4.30 5/16" 5/16" RH $4.30 ECONOMY FEMALE $ $ $4.30 PRECISION MALE CHROMOLY PRECISION MALE EXTRA STRENGTH MALE 2 PC CHROMOLY 5/16" 5/16" LH $ $4.30 3/8" 3/8" RH $4.60 3/8" 3/8" LH $4.60 7/16" 7/16" RH $6.70 7/16" 7/16" LH $6.70 1/2" 1/2" RH $6.90 1/2" 1/2" LH $ $ $ $ $ $ $6.90 1/2" 5/8" RH $ /2" 5/8" LH $ /8" 5/8" RH $9.60 5/8" 5/8" LH $ $ $ $ $ /8" 3/4" RH $ /8" 3/4" LH $ /4" 3/4" RH $ /4" 3/4" LH $ /4" OVERSIZE RH $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $

69 ROD ENDS MONOBALL HOUSINGS $13.30 ea. 1/2" MONOBALL HOUSING - 1-1/4" OD x 1-1/4" LONG $13.30 ea. 5/8" MONOBALL HOUSING HAB-10T - 1-3/4" OD x 7/8" LONG x 1-3/8" ID $13.50 ea. 3/4" MONOBALL HOUSING - 1-3/4" OD x 7/8" LONG x 1-7/16" ID $13.30 ea $13.30 ea. 3/4" MONOBALL HOUSING - 1-3/4" OD x 2" LONG 3/4" MONOBALL HOUSING - 1-5/8" OD x 1-3/4" LONG SNAP RINGS BEARINGS BEARINGS W/TEFLON HOUSINGS 1/2" MONOBALL $ $ $ $ /4" OD x 1-1/4" LONG 5/8" MONOBALL $ $ $ $ /2" OD x 13/16" LONG 5/8" HIGH MISALIGNMENT $ $ $ /4" OD x 7/8" LONG x 1-3/8" ID 3/4" HIGH MISALIGNMENT $ $ $ /8" OD x 1" LONG 3/4" MONOBALL $ $ $ $ /4" OD x 7/8" LONG x 1-7/16" ID 3/4" MONOBALL $ $ /4" OD x 2" LONG 3/4" MONOBALL $ $ /8" OD x 1-3/4" LONG 69

70 $65.80 ea. 2-5/8" OFFSET CHEVY FITS PRE 99 MASTERSBILT WARRIOR N 2-5/8" OFFSET CHEVY, NARROW $65.80 ea. 11-7/16" 16-11/16" $65.80 ea. 5/8" OFFSET CHEVY FITS MASTERSBILT, BULLITT, DW, PIERCE, NULLYNSKI, GRT N 5/8" OFFSET CHEVY, NARROW A $65.80 ea. $72.10 ea. 13-7/16" 14-11/16" 3/4" 5/8" OFFSET CHEVY - ADJUSTABLE FITS MASTERSBILT, BULLITT, DW, PIERCE, NULLYNSKI, GRT 13-7/16" 14-11/16" F 5/8" OFFSET FORD FITS SAME CHASSIS AS $65.80 ea. 13-7/16" 14-11/16" $65.80 ea. 1-1/8" OFFSET FORD FITS RAYBURN, STINGER, SHAW, HARRIS 12-5/8" 15-5/8" $65.80 ea. 1-1/8" OFFSET CHEVY FITS SAME CHASSIS AS /8" 15-5/8" $65.80 ea. 2-5/8" OFFSET FORD FITS PRE 99 MASTERSBILT WARRIOR N $65.80 ea /8" OFFSET FORD, NARROW 11-7/16" 16-11/16"

71 $65.80 ea. MOTOR PLATE CHEVY 2-1/8" OFFSET RAYBURN $65.80 ea. MOTOR PLATE CHEVY 2-1/8" OFFSET SAME AS AFCO $69.50 ea. 1/2" OFFSET CHEVY FITS SWARTZ $68.90 ea. MOTOR PLATE CHRYSLER 5/8" OFFSET 1 PIECE $65.80 ea. CHEVY FITS PERFORMANCE CHASSIS F $65.80 ea. MOTOR PLATE FORD FITS PERFORMANCE CHASSIS $65.80 ea. 5/8" OFFSET CHEVY FITS GRT CHASSIS 11-5/8" 16-11/16" 12-3/8" 16-7/8" 14-9/16" 15-11/16" 13-7/16" 14-11/16" 11-7/16" 13-11/16" 11-7/16" 13-11/16" 13-7/16" 14-1/8" 71

72 $65.80 ea. 5/8" OFFSET FORD FITS GRT CHASSIS $47.70 ea. FORD MID PLATE FITS STACY CHASSIS $28.70 pr. FRONT MOTOR MOUNTS FORD USED UNDER MOTOR MOUNTS TO ADJUST ENGINE HEIGHT 13-7/16" 14-1/8" $9.10 ea. FRONT MOTOR MOUNTS CHEVY - STEEL A 3/8" THICK ALUMINUM SPACER 1-1/2" OD x 1/2" ID A 1/2" THICK ALUMINUM SPACER 1-1/2" OD x 1/2" ID A 3/4" THICK ALUMINUM SPACER 1-1/2" OD x 1/2" ID $3.80 ea. $4.30 ea. $5.10 ea L $12.00 ea R $12.00 ea R&L $24.00 pr $12.00 ea $24.00 pr AL $8.80 ea. 72 FORD REAR MOTOR MOUNTS CHEVY REAR MOTOR MOUNTS (PAIR) LEFT REAR MOTOR PLATE - ALUMINUM

73 $58.30 pr. CHEVY 2 PC MID PLATE 2-5/8" OFFSET USES: A (RIGHT) B (LEFT) $32.90 ea. $25.50 ea. 3-5/8" 8-7/8" 8-7/8" 3-5/8" A $32.90 ea B $25.50 ea. MOTOR PLATE HALF MOTOR PLATE HALF 6-7/8" 5-7/8" C MOTOR PLATE HALF $31.10 ea C1 MOTOR PLATE HALF $31.10 ea. 1-1/16" 5-5/8" D $21.80 ea E $32.90 ea. MOTOR PLATE HALF MOTOR PLATE HALF 73

74 CHEVY 2 PC FITS SWARTZ 6-3/4" 7-7/8" 6-5/16" 7-15/16" $58.30 pr $58.30 pr. FORD 2 PC FITS SWARTZ $54.60 pr. CHEVY 2 PC FITS EARLY ELLIS PRE 01, USES: A (RIGHT) D (LEFT) $32.90 ea. $21.80 ea. 8-7/8" 1-1/16" $63.60 ea. REAR MOTOR PLATE - CHEVY UNIVERSAL 12" 36" $92.80 ea. FRONT MOTOR PLATE 1/4" x 36" FITS SB CHEVY - ALUMINUM $ ea. REAR MOTOR PLATE 1/4" x 2' x 2' FITS SB CHEVY - ALUMINUM 12" 36" 74

75 $ ea. FRONT MOTOR PLATE, CHEVY FITS STACY CHASSIS $ ea. REAR MID PLATE FORD TO POWERGLIDE, 3/8" THICK $45.10 ea. FORD WINDSOR HEADER FLANGE MOTOR PLATE MOUNTING TABS $1.25 ea. MOTOR PLATE MOUNTING TAB-ADJUSTABLE 3/8" SLOT, 1/8" THICK (R & L) $5.30 ea. 3/8" SLOT, 1/8" THICK (R & L) $4.80 ea. 3/8" SLOT, 1/8" THICK NOTCHED AND GUSSETTED 75

76 CHASSIS BRACKETS L REAR BUMPER BRACE $4.30 ea R REAR BUMPER BRACE $4.30 ea $4.00 ea. CHASSIS BRACE, 5/16" HOLE, 15" LONG $13.30 ea. RIGIDITY BAR MOUNT - 1/2" HOLE, 3/8" THICK $1.25 ea. 3/8" SLOT, 1/8" THICK $1.10 ea. NO SLOT (L & R) $4.80 ea. MOTOR PLATE MOUNTING TAB, 1/8" THICK, 3/8" SLOT $4.20 ea. QUICK STEER MOUNT $1.40 ea. STEERING SHAFT SUPPORT, 1/8" THICK, 3/4" HOLE (L & R) $5.30 ea. MOTOR PLATE MOUNTING TAB-ADJUSTABLE 3/8" SLOT, 1/8" THICK

77 CHASSIS BRACKETS CHASSIS TABS $1.60 ea $1.50 ea. 3/8" HOLE, 1/8" THICK 3/8" HOLE,.083" THICK $1.40 ea $1.40 ea. 1/2" HOLE, 3/16" THICK 1/2" HOLE, 1/8" THICK $1.60 ea. 1/2" HOLE, 3/16" THICK $2.00 ea. 1/2" HOLE, 3/16" THICK - NOTCHED $2.00 ea. NO HOLE, 3/16" THICK - NOTCHED $1.60 ea. HANGING PEDAL MOUNT $3.10 ea. HANGING PEDAL MOUNT $1.90 ea. 1/2" HOLE, 3/16" THICK $2.00 ea. 1/2" HOLE, 3/16" THICK 2" 77

78 CHASSIS BRACKETS body mounting tabs $1.00 ea $0.90 ea. 1/4" HOLE,.083" THICK 1/4" HOLE, 1/8" THICK $0.90 ea. 9/16" HOLE, 1/8" THICK - FOR RAYBURN $0.90 ea $0.70 ea $0.90 ea. 1/4" HOLE, 1/8" THICK, 1-1/2" NOTCH 1/4" HOLE,.060" THICK 5/16" HOLE, 1/8" THICK - FOR RAYBURN $26.50 ea. ADJUSTABLE UPPER CONTROL ARM MOUNT FOR ROLL CENTER - 3/8" THICK 1/2" SLOT, 6" CENTERS camber shims UPPER CONTROL ARM MOUNTS $6.40 ea. SLOTTED $6.40 ea. NO SLOTS 2-1/8" /8" THICK $ /4" THICK $ /8" THICK $ /2" THICK $ " THICK $19.70 FOR UPPER CONTROL ARM MOUNTS - 6" CENTERS 3-3/4" SERRATED BLOCK, 9/16" SLOT $ A SERRATED WASHER, 9/16" HOLE $ SERRATED BLOCK, 1/2" SLOT $ A SERRATED WASHER 1/2" HOLE $

79 CHASSIS BRACKETS upper control arm mounts 3-1/16" 3-1/16" $9.10 ea. 1/2" HOLES, 3/8" THICK 6" CENTERS ANTI-DIVE SLUGS WITH 1/2" HOLE $3.20 ea. PEDAL BRACKET, 3/8" HOLES, 1/8" THICK Lower control arm mounts PICTURE NOT YET AVAILABLE $67.10 ea. LCA MOUNT FOR F-CAR (4 PIECE KIT) $15.90 ea. UPPER CONTROL ARM MOUNT (FOR OFFSET SLUGS) 2-1/4" FROM CENTER OF SLOT TO BOTTOM OF EDGE PLATE, 6" CENTERS A 0" OFFSET $ B 1/8" OFFSET $ C 1/4" OFFSET $ D 3/8" OFFSET $ $2.00 ea. UPPER CONTROL ARM MOUNT FOR 22-SERIES - 5/8" HOLE $10.30 ea. RIGHT FRONT LCA MOUNT FOR F-CAR $10.30 ea. LEFT FRONT LCA MOUNT FOR F-CAR $23.40 ea. RIGHT REAR LCA MOUNT FOR F-CAR $23.40 ea. LEFT REAR LCA MOUNT FOR F-CAR 79

80 CHASSIS BRACKETS CHASSIS TABS $0.30 ea. 1/8" THICK, 1/2" HOLE NOTE: 100 QUANTITY - $0.25 EACH A $0.60 ea. 1/8" THICK, NO HOLE - ALUMINUM 5" $12.00 ea. DRIVE SHAFT HOOP, 1" DIAMETER TUBE $0.25 ea. 1/8" THICK, NO HOLE 2" $1.00 ea. 1/8" THICK, 3/4" HOLE 2" $3.20 ea $0.50 ea. REINFORCEMENT PLATE WITH 1/2" THREADED BOSS TRIANGLE.125" THICK 2-1/2" $0.50 ea. TRIANGLE.078" THICK 2-1/4" 3" $0.50 ea. TRIANGLE.078" THICK 1-5/8" 1" 4-1/8" 3" $0.50 ea $0.50 ea. TRIANGLE.078" THICK TRIANGLE.078" THICK

81 CHASSIS BRACKETS CHASSIS TABS $0.50 ea. REINFORCEMENT PLATE 2-1/4" x 2-1/8" $0.50 ea. REINFORCEMENT PLATE, 1/8" THICK, 3/4" x 2-1/4" $0.70 ea $0.50 ea $0.50 ea. ANGLE TAB, 1/8" THICK, 3/4" WIDE TAB, 1/8" THICK, 1/2" x 2-1/2" TAB, 1/8" THICK, 1/2" x 1-1/2" FORMED MOUNTING BRACKETS $2.00 ea $2.25 ea $3.00 ea. 2" LONG 3" LONG 4-3/4" LONG RECTANGULAR CAPS $0.70 ea. 2" x 2" $1.00 ea. ROUND CAPS /4" DIAMETER $ " DIAMETER $ /4" DIAMETER $ /8" DIAMETER $ /2" DIAMETER $ /4" DIAMETER $ /16" DIAMETER $ " DIAMETER $ /8" DIAMETER $ /2" DIAMETER $0.40 2" x 3" 81

82 CHASSIS BRACKETS R & L $31.80/PAIR ASA IGNITION BOX MOUNTING BRACKET - CLAMP-ON (PAIR) $26.50 ea. ASA IGNITION BOX PLATE (CRANE) R & L $8.50/PAIR ASA IGNITION BOX MOUNTING BRACKET - WELD-ON (PAIR) $1.40 ea. TORSION CLIP $1.40 ea. HAIR PIN CLIP $1.03 ea. PANEL HOLD DOWN CLIP SCUFF PLATES POLISHED $ BLUE $ GOLD $ RED $ $1.00 ea. STAINLESS STEEL, 3/8" HOLE $0.70 ea. ALUMINUM, 3/8" HOLE

83 $9.10 ea. CLAMP-ON HOOD PIN BOSS FOR 1-3/4" TUBE $9.10 ea. CLAMP-ON HOOD PIN BOSS FOR 1-1/2" TUBE HOOD PINS air cleaner nuts $1.20 ea. HOOD PIN BOSS 1/2" x 20" x 3/4" LONG ALUMINUM /2" x 2-3/4" PLAIN $ /2" x 2-3/4" BLUE $ /2" x 2-3/4" GOLD $ /2" x 2-3/4" RED $ /2" x 3-3/4" PLAIN $ /2" x 3-3/4" BLUE $ /2" x 3-3/4" GOLD $ /2" x 3-3/4" RED $ /2" x 6" PLAIN $4.00 STEEL /8" DIAMETER, 2" LONG $ /8" DIAMETER, 3" LONG $ /8" DIAMETER, 4" LONG $ /8" DIAMETER, 5" LONG $ /4" PLAIN $ /16" PLAIN $ /4" BLUE $ /16" BLUE $ /4" RED $ /16" RED $ /4" PURPLE $ /16" PURPLE $

84 Accessories $13.30 ea. ENGINE LIFT PLATE $48.00 ea. FORD TRANSPORT STAND $48.00 ea. CHEVY TRANSPORT STAND FORD WATER NECK HOUSING AND PARTS $78.50 ea. FORD WATER NECK HOUSING WITH -16 FITTING $26.50 ea. FORD WATER PUMP BACKING PLATE $15.30 ea. CARBURETOR JET PLATE - RED A HOUSING ONLY $ O-RING #217 BUNA $ /16" - 18 x 3/4" 12 POINT BOLT $ SS 5/16" SAE STAINLESS STEEL WASHER $ $20.70 ea. -16 FITTING TO AN PORT $5.70 ea. NOVUS #1 CLEANER FOR LEXAN $7.70 ea. NOVUS #2 CLEANER FOR LEXAN $9.60 ea. NOVUS #3 LEXAN POLISH

85 GAS PEDALS STANDARD $ MOUNTING PLATE $ STANDARD WITH STEEL PIVOT BUSHING, NO PLATE $ WITH SHORT TOP $ STANDARD WITH ANGLED PLATE $ SHORT WITH ANGLED PLATE $ R STANDARD WITH ROLLER FOOT PEDAL R GAS PEDAL WITH ANGLED PLATE WITH NYLON ROLLER INSTALLED $28.10 ea. $28.10 ea $22.30 ea. GAS PEDAL FOR FIREWALL MOUNT R GAS PEDAL, FIREWALL MOUNT WITH NYLON ROLLER INSTALLED $19.10 ea. THROTTLE ROD 18" $19.10 ea. THROTTLE ROD 24" $31.80 ea $1.90 ea S $6.20 ea. CARBURETOR BUSHING THROTTLE ROD HEIM WITH STUD 85

86 OUR DEDICATION TO MAKING THE LIGHTEST, STRONGEST, MOST DURABLE PARTS IS REFLECTED IN EVERYTHING WE PRODUCE. DIE FORMED STEEL, ONE PIECE BOX CONSTRUCTION WITH RADIUS REINFORCED LIGHTENING HOLES AND ALUMINUM STRAP MAKE THIS PIECE SUPER TOUGH AND REDUCES WEIGHT PIVOTING REPLACEABLE BOLTS AVAILABILITY IN TWO SIZES MAKE IT PERFECT FOR ALMOST EVERY APPLICATION YOU DEPEND ON EVERY PART IN YOUR CAR WE FEEL EVERY PART SHOULD GET THIS KIND OF ATTENTION $21.20 ea. BATTERY BOX ASSEMBLY 9-1/2" WITH HOOKS $23.40 ea. BATTERY BOX ASSEMBLY 11" WITH HOOKS $30.30 ea. BATTERY BOX ASSEMBLY 11" BOLT-ON BATTERY BOX REPLACEMENT PARTS /2" BATTERY BOX PAN $ " BATTERY BOX PAN $ BATTERY BOX BOLT $ BATTERY BOX RETAINER 9-1/2" $ BATTER BOX RETAINER 11" $ SIDE PLATE - SHORT $ SIDE PLATE - HOOK STYLE $ $20.20 ea. BATTERY BOX ASSEMBLY 9-1/2" W/O HOOKS $22.30 ea. BATTERY BOX ASSEMBLY 11" W/O HOOKS 86

87 LOWER CONTROL ARM ALSTON REPLACEMENT - RIGHT LOWER CONTROL ARM ALSTON REPLACEMENT - LEFT 11-1/2" CENTER TO CENTER $56.00 $ BUSHING FOR ALSTON LOWER $ $58.30 ea. TUBULAR LOWER FOR MUSTANG II - RIGHT $58.30 ea. TUBULAR LOWER FOR MUSTANG II - LEFT PART # PEDAL DESCRIPTION PLATE SURFACE FINISH A GAS PEDAL STANDARD BLACK POWDER COAT B GAS PEDAL EXPANDED METAL PAD BLACK POWDER COAT PRICE/EA $14.90 $ C GAS PEDAL STANDARD CHROME $ D GAS PEDAL EXPANDED METAL PAD A BRAKE PEDAL STANDARD BLACK POWDER B BRAKE PEDAL EXPANDED METAL PAD CHROME $35.00 BLACK POWDER $16.90 $ C BRAKE PEDAL STANDARD CHROME $ D BRAKE PEDAL EXPANDED CHROME $35.00 METAL PAD A CLUTCH PEDAL STANDARD BLACK $ B CLUTCH PEDAL EXPANDED METAL PAD POWDER BLACK COAT POWDER $ C CLUTCH PEDAL STANDARD CHROME $ D CLUTCH PEDAL EXPANDED CHROME $34.00 METAL PAD A CLUTCH ANGLED PEDAL STANDARD BLACK POWDER $ B C D CLUTCH ANGLED PEDAL CLUTCH ANGLED PEDAL CLUTCH ANGLED PEDAL EXPA NDED BLACK COAT $23.90 METAL PAD POWDER STANDARD CHROME COAT $28.40 EXPA NDED METAL PAD CHROME $ $4.50 ea $14.00 ea $14.40 ea. NYLON BUSHING BRAKE ROD 5/16" x 24 CLUTCH CROSS SHAFT 87

88 $4.00 ea $8.10 ea $9.50 ea. CROSS SHAFT END - 4 HOLES SHAFT SUPPORT - SHORT SHAFT SUPPORT - LONG $10.10 ea. CLUTCH ROD $14.90 ea. LADDER BAR ADJUSTER $15.20 pr. DRAG RACE LOWER SHOCK MOUNT (PAIR) $17.50 ea $5.10 ea $14.00 ea. MOUNT FOR ADJ SHOCK BRACKET STEERING SHAFT BUSHING (NYLON) ENGINE STABILIZER $66.00 ea $8.00 ea $8.00 ea. DOOR HINGE KIT - 2 HINGE ASSEMBLIES PER KIT TRACK LOCATOR BRACKETS AXLE BEARING RETAINER SMALL FORD AXLE BEARING RETAINER LARGE FORD /2" HOLE, 3/4" WIDTH $ /8" HOLE, 1" WIDTH $ /4" HOLE, 1-1/8" WIDTH $ /8" HOLE, 1-1/8" WIDTH $

89 bolts /4"-20 x 2" HEX - GRADE 5 $ /8"-16 x 1-1/2" HEX - GRADE 5 $ /8"-16 x 2" HEX - GRADE 5 $ /8"-16 x 3" HEX - GRADE 5 $ /16"-24 x 1-1/4" HEX - GRADE 8 $ /2"-13 x 2-1/4" HEX - GRADE 2 $ /2"-13 x 2-3/4" HEX - GRADE 2 $ /2"-13 x 4-3/4" HEX - GRADE 5 $ /2"-20 x 1-1/2" HEX - GRADE 8 $ /4"-10 x 3" HEX - GRADE 5 $ /4"-10 x 3-1/2" HEX - GRADE 5 $ $4.30 ea. ALUMINUM MALE WELD IN BUNG PIPE $4.60 ea. 3/8" ALUMINUM PIPE PLUG FOR QC washers /4" SAE FLAT $ /8" FLAT $ /2" SAE FLAT WASHER FOR U-BOLTS $ A $2.75 ea. 1/4" ALUMINUM COUNTERSUNK WASHER 1" DIAMETER A $3.00 ea. 5/16" ALUMINUM COUNTERSUNK WASHER 1-3/8" DIAMETER NYLOK NUTS jam nuts /4" x 20 $ /8" x 16 $ /8" x 24 $ /8" x 11 $ /8" x 18 $ /8" x 18 $ /4" x 10 $ /4" x 16 $1.00 HOL E SIZE T HREAD HA ND PA RT # PRIC E/EA 1/4" 28 RH R $0.40 1/4" 28 LH L $0.60 5/16" 24 RH R $0.40 5/16" 24 LH L $0.60 3/8" 24 RH R $0.60 3/8" 24 LH L $1.10 7/16" 20 RH R $0.60 7/16" 20 LH L $1.10 1/2" 20 RH R $0.60 1/2" 20 LH L $1.10 5/8" 18 RH R $0.85 5/8" 18 LH L $ /16" 18 RH R $ /16" 18 LH L $2.25 3/4" 16 RH R $0.80 3/4" 16 LH L $1.00 7/8" 9 RH R $1.30 1" 8 RH R $

90 WELD NUTS THREADED INSERTS /2" x 20 THREAD FOR 1" x.095" TUBE $ /8" x 18 THREAD FOR 1" X.095" TUBE $ /8" x 18 THREAD FOR 1-1/4" X.095" TUBE $ /2" x 13 THREAD FOR 1-1/4" x.095" TUBE $ /4" x 20 THREAD - 1/2" OD $ /16" x 18 THREAD - 1/2" OD $ /8" x 16 THREAD - 1/2" OD $ /8" x 24 THREAD x 11/32" LONG $ /8" x 24 THREAD x 1/2" STEP x 5/8" LONG $ /16" x 20 THREAD x 3/8" LONG $ x1 $4.00 ea. WELD NUT PLATE FOR 1 x 1 x.065" TUBE $1.80 ea. INNER TIE ROD REDUCER 5/8" TO 1/2" $4.00 ea. RIGIDITY BAR MOUNTING BOSS FOR 3/8" BOLT - 5/8" OD x.406" ID x 2.250" LONG $2.85 ea. STEP BUSHING - STEEL 5/8" TO 1/2" W/.500" FLANGE, INCREASES TRAVEL ON 5/8" HEIM $2.70 ea. STEP BUSHING - STEEL 3/4" TO 5/8" W/.500" FLANGE, INCREASES TRAVEL ON 3/4" HEIM A STEP SPACER FOR MUSTANG LOWER $1.40 ea. REDUCER 5/8" TO 1/2" $1.40 ea. REDUCER 3/4" TO 5/8" $3.00 ea.

91 STEP SPACERS AND STEP BUSHINGS PART # DESCRIPTION PRICE STEP BUSHING 5/8" TO 1/2" WITH.200 FLANGE - STEEL $ STEP BUSHING 5/8" TO 1/2" WITH.400 FLANGE - STEEL $ STEP SPACER 1/2" ID x 3/4" STEP x.10 FLANGE - STEEL $ STEP SPACER 1/2" ID x 3/4" STEP x.25 FLANGE - STEEL $ A STEP SPACER 1/2" ID x 3/4" STEP x.25 FLANGE - ALUMINUM $ STEP BUSHING 1/2" ID x 3/4" STEP x.75 FLANGE - STEEL $ STEP SPACER 5/8" ID x 3/4" STEP x.25 FLANGE - STEEL $ STEP SPACER 1/2" ID x 5/8" STEP x.50 FLANGE - STEEL $ A STEP BUSHING 1/2" ID x 3/4" STEP x.56 FLANGE - ALUMINUM $ x1 $4.00 ea. 3/8"-16 PLATE NUT FOR 1 x 1 SQUARE - STEEL $2.50 ea. TAPERED THREADED BOSS WITH TAPPED 1/2" HOLE - 1-1/4" OD x 1" LONG - NOTCHED $1.20 ea. HOOD PIN BOSS 1/2" x 20 THREAD x 3/4" LONG $1.00 ea. THREADED BOSS 3/8" x 24 THREAD x 3/4" LONG - 5/8" OD $2.50 ea. TAPERED THREADED BOSS WITH TAPPED 1/2" HOLE - 1-1/4" OD x 1" LONG MOTOR MOUNT SPACERS A 3/8" THICK ALUMINUM SPACER 1-1/2" OD x 1/2" ID A 1/2" THICK ALUMINUM SPACER 1-1/2" OD x 1/2" ID A 3/4" THICK ALUMINUM SPACER 1-1/2" OD x 1/2" ID $3.80 ea. $4.30 ea. $5.10 ea. 91

92 STEP SPACERS SHOCK MOUNT SPACERS A $3.00 ea. 1/2" ID x 5/8" STEP x 1-5/16" LONG - ALUMINUM A $3.00 ea. 1/2" ID x 3/4" STEP x 1-1/4" LONG - ALUMINUM $3.20 ea. 1/2" ID x 3/4" STEP x 1-1/4" LONG - STEEL A $3.00 ea. STEP SPACER FOR A MB HOUSING A $3.00 ea. STEP SPACER FOR B MB HOUSING /2" ID x 3/4" OD x.217" LONG $ /2" ID x 3/4" OD x.25" LONG $ /2" ID x 3/4" OD x.50" LONG $ /2" ID x 3/4" OD x.75" LONG $ $1.70 ea. TAPERED SPACER - 5/8" ID x 7/16" LONG $1.50 ea. TAPERED SPACER - 5/8" ID x.180" LONG 92

93 TAPERED SPACERS /2" ID x 1" OD x 1/4" THICK $ /8" ID x 1-1/4" OD x 1/4" THICK $ /4" ID x 1-1/2" OD x 1/4" THICK $ $4.20 ea. TAPERED SPACER FOR 3/4" ID x 5/8" LONG $4.20 ea. TAPERED SPACER FOR 5/8" ID x 1-1/4" OD x 5/8" LONG A $4.20 ea. TAPERED SPACER FOR 3/4" ID x 7/8" LONG - ALUMINUM SPACERS FOR CENTER SECTION BRACKETS ALUMINUM STEEL DESCRIPTION PRICE /4" ID x 1" OD x.125" LONG $ /4" ID x 1" OD x 1/4" LONG $ A /4" ID x 1" OD x.307" LONG $ A 3/4" ID x 1" OD x.432" LONG $ A /4" ID x 1" OD x 1/2" LONG $ A 3/4" ID x 1-1/4" OD x 5/8" LONG $ A /4" ID x 1" OD x 3/4" LONG $ A /4" ID x 1" OD x 1" LONG $ A 3/4" ID x 1-1/4" OD x 1-1/8" LONG $ A 3/4" ID x 1-1/4" OD x 1-3/8" LONG $ /4" ID x 1" OD x 1.400" LONG $ A /4" ID x 1" OD x 1-1/2" LONG $ /4" ID x 1" OD x 2" LONG $ A 3/4" ID x 1-1/4" OD x 2-5/8" LONG $ A /4" ID x 1" OD x 3-3/16" LONG $