Timing Advance: Camber Link: Radio: Throttle/Brake Expo: Wing/Wickerbill: ESC: Throttle/Brake EPA: Battery Position: Shorty
|
|
|
- Michael Fields
- 6 years ago
- Views:
Transcription
1 Name: Kit Setup - Laydown Clay ate: vent: lue Groove ry Toe: +/- 0 Ride Height: mm Camber: - Kick ngle: 0º 5º 0º VL Setting: Short rm Long rm : lum Plastic HRC lum HRC Kick Shim: rass Plastic Oil:.5 Piston: x.6mm (TLR009) Spring: Low Freq. Color: Silver Sway ar: 0.8mm.0mm.mm Shock Limiters: mm Stroke: mm Shock Locations: _ Spindle all Stud: Low Mount ump Steer Spacers: mm ckerman all Stud: Low Mount ckerman Spacers: mm ckerman rm: # # # xle Spacing: mm +mm Trail: mm mm 4mm Camber Link: - usty mm stro Turf mm mm High ite mm Notes: INSI MIL OUTSI Configuration: Laydown Standup L iff. Height: +.5mm Laydown Transmission Type: -Gear 4-Gear Toe Inserts: mm nti-squat Inserts: C Inner Roll Center: LRC HRC Standup Ride Height: mm Camber: -.5 0mm Hub Spacing: Middle (mm front, mm rear) xle Height: +mm OUTSI Hex Width: MIL INSI Sway ar:.0mm.mm.4mm Oil:.5 Piston: x.7mm (TLR00) Spring: Low Freq. Color: White Shock Limiters: mm Stroke: 9mm Shock Locations: _ Shock Mounting: Inner Link Spacer: -mm 0mm +mm Timing dvance: Camber Link: () - Radio: Throttle/rake xpo: Wing/Wickerbill: _ line wicker Servo: Servo xpo: Wing ngle: 0 4 SC: Throttle/rake P: attery Position: Shorty _ with battery strap Initial rake: Motor: iff Type: all Gear Setting: Normal, /4 Rotation rag rake: Pinion: Spur: riveshaft Length: CV Universal Length: 67mm Throttle Profile: _ attery: _ rass, 4g Plate rass, 5g nti-squat lock rass, 7g luminum Tire: Compound: Insert: dditive: rass Pivot, 50g rass Kick Shim, 7g allasts rass, 5g Notes: 7
2 Name: Kit Setup - Stand Up ate: vent: lue Groove ry Toe: +/- 0 Ride Height: mm Camber: - Kick ngle: 0º 5º 0º VL Setting: Short rm Long rm : lum Plastic HRC lum HRC Kick Shim: rass Plastic Oil:.5 Piston: x.6mm (TLR009) Spring: Low Freq. Color: Silver Sway ar: 0.8mm.0mm.mm Shock Limiters: mm Stroke: mm Shock Locations: _ Spindle all Stud: Low Mount ump Steer Spacers: mm ckerman all Stud: Low Mount ckerman Spacers: mm ckerman rm: # # # xle Spacing: mm +mm Trail: mm mm 4mm Camber Link: - usty mm stro Turf mm mm High ite mm Notes: INSI MIL OUTSI Configuration: Laydown Standup L iff. Height: +.5mm Laydown Transmission Type: -Gear 4-Gear Toe Inserts: mm nti-squat Inserts: C Inner Roll Center: LRC HRC Standup Ride Height: mm Camber: -.5 0mm Hub Spacing: Middle (mm front, mm rear) xle Height: +mm OUTSI Hex Width: MIL INSI Sway ar:.0mm.mm.4mm Oil:.5 Piston: x.7mm (TLR00) Spring: Low Freq. Color: White Shock Limiters: 0mm Stroke: 0.5mm Shock Locations: _ Shock Mounting: Inner Link Spacer: -mm 0mm +mm Timing dvance: Camber Link: (Stand up) - Radio: Throttle/rake xpo: Wing/Wickerbill: _ line wicker Servo: Servo xpo: Wing ngle: 0 4 SC: Throttle/rake P: attery Position: Shorty _ Initial rake: Motor: iff Type: all Gear Setting: Normal, /4 rotation rag rake: Pinion: Spur: riveshaft Length: CV Universal Length: 67mm Throttle Profile: _ attery: _ rass, 4g Plate rass, 5g nti-squat lock rass, 7g luminum Tire: Compound: Insert: dditive: rass Pivot, 50g rass Kick Shim, 7g allasts rass, 5g Notes: 7
3 Name: Laydown, Carpet/stro Recommended ate: vent: lue Groove ry Toe: +0.5 Ride Height: 6mm Camber: - Kick ngle: 0º 5º 0º VL Setting: Short rm Long rm : lum Plastic HRC lum HRC Kick Shim: rass Plastic Oil: 7.5 Piston: x.6mm (TLR009) Spring: Low Freq. Color: lack Sway ar: 0.8mm.0mm.mm Shock Limiters: mm Stroke: mm Shock Locations: _ Spindle all Stud: Low Mount ump Steer Spacers: mm ckerman all Stud: Low Mount ckerman Spacers: 0mm ckerman rm: # # # xle Spacing: mm +mm Trail: mm mm 4mm Camber Link: - usty 4mm stro Turf mm 0mm High ite mm Notes: INSI MIL OUTSI Configuration: Laydown Standup L iff. Height: +.5mm Laydown Transmission Type: -Gear 4-Gear Toe Inserts: mm nti-squat Inserts: C Inner Roll Center: LRC HRC Standup Ride Height: 7mm Camber: -.5 0mm Hub Spacing: ack mm (mm front, mm rear) xle Height: +mm OUTSI Hex Width: MIL INSI Sway ar:.0mm.mm.4mm Oil: 0 Piston: x.7mm (TLR00) Spring: Low Freq. Color: Yellow Shock Limiters: mm Stroke: 9mm Shock Locations: _ Shock Mounting: Inner Link Spacer: -mm 0mm +mm Timing dvance: Camber Link: - Radio: Throttle/rake xpo: Wing/Wickerbill: _ line wicker Servo: Servo xpo: Wing ngle: 0 4 SC: Throttle/rake P: attery Position: Shorty _ - Full Forward Initial rake: Motor: iff Type: all Gear Setting: 0,000cs rag rake: Pinion: Spur: riveshaft Length: CV Universal Length: 67mm Throttle Profile: _ attery: _ rass, 4g Plate rass, 5g nti-squat lock rass, 7g luminum Tire: Compound: Insert: dditive: rass Pivot, 50g rass Kick Shim, 7g allasts rass, 5g Notes: 74
4 Name: ate: vent: lue Groove ry Toe: Ride Height: Camber: Caster: 0º 5º Kick ngle: 0º 5º 0º VL Setting: Short rm Long rm : lum Plastic HRC lum HRC Kick Shim: rass Plastic Oil: Piston: Spring: Low Freq. Color: Sway ar: 0.8mm.0mm.mm Shock Limiters: Stroke: Shock Locations: _ Spindle all Stud: Low Mount ump Steer Spacers: ckerman all Stud: Low Mount ckerman Spacers: ckerman rm: # # # xle Spacing: mm +mm Trail: mm mm 4mm Camber Link: usty stro Turf High ite Notes: INSI MIL OUTSI Configuration: Laydown Standup L iff. Height: +.5mm Transmission Type: -Gear 4-Gear Toe Inserts: nti-squat Inserts: Inner Roll Center: LRC HRC Ride Height: Camber: Hub Spacing: xle Height: +mm Hex Width: Sway ar:.0mm.mm.4mm Oil: Piston: Spring: Low Freq. Color: Shock Limiters: Stroke: Shock Locations: _ Shock Mounting: Inner Link Spacer: -mm 0mm +mm Camber Link: Timing dvance: Throttle/rake xpo: Servo xpo: Throttle/rake P: Radio: Wing/Wickerbill: _ Servo: Wing ngle: 0 4 SC: attery Position: _ Initial rake: Motor: iff Type: all Gear Setting: rag rake: Pinion: Spur: riveshaft Length: CV Universal Length: Throttle Profile: _ attery: _ rass, 4g Plate rass, 5g C nti-squat lock rass, 7g luminum Standup Laydown OUTSI MIL INSI Tire: Compound: Insert: dditive: rass Pivot, 50g rass Kick Shim, 7g allasts rass, 5g Notes: 75
5 Name: ate: vent: lue Groove ry Toe: Ride Height: Camber: Caster: 0º 5º Kick ngle: 0º 5º 0º VL Setting: Short rm Long rm : lum Plastic HRC lum HRC Kick Shim: rass Plastic Oil: Piston: Spring: Low Freq. Color: Sway ar: 0.8mm.0mm.mm Shock Limiters: Stroke: Shock Locations: _ Spindle all Stud: Low Mount ump Steer Spacers: ckerman all Stud: Low Mount ckerman Spacers: ckerman rm: # # # xle Spacing: mm +mm Trail: mm mm 4mm Camber Link: usty stro Turf High ite Notes: INSI MIL OUTSI Configuration: Laydown Standup L iff. Height: +.5mm Transmission Type: -Gear 4-Gear Toe Inserts: nti-squat Inserts: Inner Roll Center: LRC HRC Ride Height: Camber: Hub Spacing: xle Height: +mm Hex Width: Sway ar:.0mm.mm.4mm Oil: Piston: Spring: Low Freq. Color: Shock Limiters: Stroke: Shock Locations: _ Shock Mounting: Inner Link Spacer: -mm 0mm +mm Camber Link: Timing dvance: Throttle/rake xpo: Servo xpo: Throttle/rake P: Radio: Wing/Wickerbill: _ Servo: Wing ngle: 0 4 SC: attery Position: _ Initial rake: Motor: iff Type: all Gear Setting: rag rake: Pinion: Spur: riveshaft Length: CV Universal Length: Throttle Profile: _ attery: _ rass, 4g Plate rass, 5g C nti-squat lock rass, 7g luminum Standup Laydown OUTSI MIL INSI Tire: Compound: Insert: dditive: rass Pivot, 50g rass Kick Shim, 7g allasts rass, 5g Notes: 76
PRO THE ULTIMATE RACING MACHINE
PRO1 2004 THE ULTIMATE RACING MACHINE Dear Customer Enclosed you will find several data sheets and illustrations for the 2004 PRO1 race car. All this data is based on what our factory engineers and drivers
Item Number Item Name MSRP MAP
Kits and RTRs 4021 RC12R6-FT KIT $439.99 $285.99 7063 ProSC 4x4 RTR $529.99 $334.99 7063C ProSC 4X4 RTR LiPo Combo $599.99 $379.99 8023 RC10F6 Factory Team Kit $499.99 $339.99 20150 SC28 RTR LUCAS OIL
PRO1 2001, THE ULTIMATE RACING MACHINE
PRO1 2001, THE ULTIMATE RACING MACHINE Dear Customer Enclosed you will find several data sheets and illustrations for the 2001 PRO1 race car. All this data is based on what our factory engineers and drivers
along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet.
Use this XT2 Dirt Conversion Supplementary Sheet along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet. Parts included in Bag 8: 303141 SHIM 3x5x1.0MM (10) 322111 XT2 COMPOSITE
Contents. Symbols Used. Equipment Required L=R. Page. Apply Thread Lock. Apply. Silicone Oil. 30mm Fan
Contents Content Page Content Page Content Page 0. Tool and Accessories 1.Filing the Edges of the Chassis 2.Bulkhead Installation 3.Spur Gear Assembly 4.Front Spool Assembly 5.Gear Differential Assembly
:: CVA s
:: Shocks 507 5 75 39 333 33 335 33 337 33 339 3330 350 :: Springs 39 39 393 39 395 39 395 3953 395 39 Red O-Rings Shock Piston, PTFE Preload Spacers, Collars, Cups Shock Shaft all Cup VCS3 Shock Kit VCS3
=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG mm. When track High Traction or want to reduce steering
NOTE : =Apply Thread lock adhesive R80059 One Way Cup () R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 CA GE =Apply CA Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic
ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B Associated Electrics, Inc. RS-1
ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B4 TT RS-1 2003-2006 Associated Electrics, Inc. FINAL ADJUSTMENTS RADIO ADJUSTMENTS Use the following
Additional equipment and parts needed: Tools needed: Disclaimer: Warnings: Warranty:
Introduction Thank you for purchasing the Tekno RC SCT410 1/10th Scale Electric 4WD Competition Short Course Truck. The SCT410 represents the state-of-the-art in 1/10th Electric Short Course technology.
3.0 Tuning Tips. To Shut Off the Engine: Use the included pipe plug or simply bump the flywheel with a wrench or plastic handled tool.
TM 8IGHT 3.0 Tuning Tips Before you start making changes on your 8IGHT 3.0 Off-Road Racing buggy, you need to make a few decisions. First of all, tires, and how they are setup, have a tremendous impact
E Thank you for purchasing VBC Racing product. COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT INSTRUCTIONS MANUAL
COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION FORMULA CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we
#0980 Intimidator 7 Direct Drive Racing Kit
#0980 Intimidator 7 Direct Drive Racing Kit 1 Thank you for purchasing the Intimidator 7! Within this kit you will find a race winning car with over 30 years of Custom Works design and quality. The latest
=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01
NOTE : =Apply Thread lock adhesive R80059 One Way Cup R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 =Apply Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic Shims () R80005
=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01. R Front One Way Cup (2) R Front One Way
NOTE : =Apply Thread lock adhesive R80059 One Way Cup () R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 =Apply Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic Shims ()
OWNER'S MANUAL Magnolia Ave., Chino, CA phone: (909) fax: (909)
OWNER'S MANUAL Carefully read through all instructions to familiarize yourself with the parts, construction techniques, and tuning tips outlined in this manual. Being able to grasp the overall design of
DIFFERENTIAL STEERING RACK
BAG-A DIFFERENTIAL (2 Sets) +Driver Cap Screw Diff Ball Nylon Nut Thrust Washer Thrust Ball Diff Joint Cup A Allen Wrench 850 Bearing Diff Ring Diff Spring Nylon Nut 850 Bearing Diff Ring Diff Ball Ball
TP02C. 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy. Dimensions. Length 410mm Width 250mm Height 150mm
TP02C 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy Dimensions Length 410mm Width 250mm Height 150mm Transmitter Preparation Power Switch Antenna 27MHzTransmitter Crystal T 27MHz ON Extend
BAG F STEP F-01 STEP F-02 STEP F-03. Front and Rear Clip Installation
q STEP F-01 BAG F Front and Rear Clip Installation The Servo Link installed in Step B-03 was set to an approximate length. The correct length will vary depending on the type of servo used, the radio settings,
SOARSEIKI.Co.,Ltd
SOARSEIKI.Co.,Ltd info@soarseiki.com 1 2 3 4 BAGS A1 FRONT AND REAR DIFF 5 BAGS A2 CENTER DIFF 5 BAGS B1 FRONT TRANSMISSION STEP B1-1 Apply a thiin layer of lubricant on the gear. GR160003 BE050110040
Mulching and Finishing Mowers MP and FP
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)
SUSPENSION PARTS LOSB2002 F/R Suspension Arms (pr)(lst2)... $10.00 LOSB2102 Steering Bell Cranks, Shafts, & Chassis Braces (LST/2)... $7.00 LOSB2104 Front Spindles & Carriers (LST2)... $7.00 LOSB2106 Rear
.050 Allen key 1.5mm Allen key 1/16 Allen key 5/64 Allen key 3/32 Allen key Turnbuckle & 3/16 wrench
1 Thank you for purchasing the Outlaw 4 Sprint Car! The Outlaw sprint car platform has been developed for loose dirt buggy tire racing. In this kit you will find the 4 th evolution of the car which features
PARTSBOOK. This part of the manual contains part numbers and illustrations based on the latest information available at the time of print.
2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes at
:: Additional Features Your new TC6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions):
8/10 2 :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC10TC6. Please take a moment to
R R11 Eccentric Hub-Alu (4) R R11 Eccentric Hub-Alu (4) NOTICE. Pulley cover direction NOTICE BAG 01 NOTICE BAG 01
BAG BAG R Spool Axle Alu RA Front Spool Pulley Set 8T (4pcs) R Diff Gears (with Axle) Trim any excess flashing from the diff gear axle at the mold injection point. (pcs) (4pcs) R Spool Outdrive (pcs) R6
ABC HOBBY ORIGINAL RADIO CONTROL CAR
ABC HOBBY ORIGINAL RADIO CONTROL CAR Instruction Manual Study the instructions thoroughly before assembly. FRONT WHEEL DRIVE NEW STYLE STRUT SUSPENSION BATHTUB CHASSIS 4 BEVEL GEAR DIFFERENTIAL FULL ADJUSTABLE
INSTRUCTION MANUAL AX90053-I001
INSTRUCTION MANUAL AX90053-I001 2 3 AX80018 Hardware Parts Tree AX80006 Servo Set x3 AX31301 10mm Shock Caps Parts Tree (Blue) AX80069 AX31300 10mm Shock Parts Tree 2 (Blue) AX31114 WB8 Driveshaft AX80033
Next, chase the threads in the lower A-arm mounts with the 5/8-18 tap and blowout any remaining particles.
Next, chase the threads in the lower A-arm mounts with the 5/8-18 tap and blowout any remaining particles. Now, apply some anti-seize to the threads of the pivot stud. Also put anti-seize inside the bore
New Generation Rear Wheel Drive
New Generation Rear Wheel Drive ABC HOBBY ORIGINAL RADIO CONTROL CAR Instruction Manual Study the instructions thoroughly before assembly. REAR 2 WHEEL DRIVE REAR MOUNTED MOTOR BELT DRIVE DOUBLE DECK CHASSIS
carbon fiber before assembly. Sand glue to the edges and
chassis and carbon fiber give you a before assembly. Sand glue to the edges and 5 BAG MARKED CA BAG MARKED M3x6 Flathead 4 03 4 05 BAG MARKED 2 10 13 Installing Steering System Shock Assembly M4x28
INSTALLATION GUIDE. TCP TIER-14 Bump Steer Conversion Kit - Early Mustang to Late Spindle
READ ALL INSTRUCTIONS COMPLETELY AND THOROUGHLY UNDERSTAND THEM BEFORE DOING ANYTHING. CALL TOTAL CONTROL PRODUCTS TECH SUPPORT (916) 388-0288 IF YOU NEED ASSISTANCE. INSTALLATION GUIDE TCP TIER-14 Bump
OWNER'S MANUAL 2000 & ROAR National Champion
2000 & 2001 ROAR National Champion OWNER'S MANUAL Carefully read through all instructions to familiarize yourself with the parts, construction techniques, and tuning tips outlined in this manual. Being
Installation Instructions
Part # - 6-67 C Front TruTurn System Recommended Tools 6-67 C Front TruTurn System Installation Table of contents Page... Included components Page... Upper Control rm Components Page... Lower Control rm
7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675" pr GT RACING FRONT
RC10GT & RTR GT MC 9 McCOY GLOW PLUG 1 3.9 2661 CLUTCH NUT CLIPS 6.7 3216 WASHER, #4 12 1.00 3719 NYLON WIRE TIES, 6" heavy duty 12 2.00 3720 NYLON TIES, 8", light duty for receiver 12 2.00 3721 SELF-TAPPING
Assembly Manual. 1/10th Formula 1 Car
Assembly Manual 1/10th Formula 1 Car Center Pivot Bag 1 3374 - Center Pivot Socket 40194 - Hard Anodized Alum Pivot ball 3254-2-56 *Note - Sometimes it is helpful to slightly over-tighten the top clamp
Bag 1. Bag 1. Center Pivot. Center Pivot
8 00734 01901 5 Center Pivot Bag 1 3374 - Center Pivot Socket 4019 - Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the top clamp screws, then work the ball
CP001 CAMBER/CASTER PLATES MUSTANG
TOOLS REQUIRED: Hydraulic jack and jack stands Spring compressor Wrenches and sockets: Component check list: Description QTY Before proceeding with the installation, confirm Driver side bearing plate 1
INSTRUCTION MANUAL INSTRUCTION MANUAL
INSTRUCTION MANUAL INSTRUCTION MANUAL Thank you for purchasing Pro-Line s PRO-Fusion SC 4 4! For Over 35 years, Pro-Line has designed and manufactured the best RC products in the world. This 1:10 scale
When You Want To Go Fast. Instruction Manual Part # 500,501 Jato Sportsman Nitro Funny Car Kit
When You Want To Go Fast Instruction Manual Part # 500,501 Jato Sportsman Nitro Funny Car Kit If Our Name is On It, Rest Assured It's The Worlds Finest Read The Instruction Page 1 Here are "Tips and Tricks"
220-UL PUMP PARTS PRICE LIST
ITEM 1 PUMP Pump Body 1 See Note 1 1 Pump Body with Flush 1 See Note 1 1 7 Drive Shaft (Replaces 103227) 1 108425 8 Short Shaft (Replaces 103228) 1 108426 9 10 220-UL PUMP PARTS PRICE LIST DESCRIPTION
BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00
General Building Tips: A Good Dealer Is Extremely Important!! 1 Additional Items Needed For Operation. Tools Supplied
Owner s Manual Thank you for choosing the Team Magic E4JR. The E4JR includes a large selection of the important specialty parts when compared to the previous versions. Before you start building your new
INSTALLATION GUIDE Bolt-On Drag-Race Strut Clip Chevy II
INSTALLATION GUIDE 7702 Bolt-On Drag-Race Strut Clip 1962-67 Chevy II Description: STRUT CLIP 4130 BOLT ON 62-67 CHEVY II, INCLUDES 4130 ROUND TUBE FRAME CLIP, DOUBLE-ADJUSTABLE STRUTS, ADJUSTABLE-HEIGHT
PARTSBOOK. Hall Manufacturing, Inc E. Washington Ave., P.O. Box Drawer 5638 North Little Rock, AR (501)
540 RPM 2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes
PREBUIL UILT ASSEMBLY AND OPERATION MANUAL
PREBUIL UILT Length: 15.2" [385mm] Width: 13" [330mm] Height: 5.8" [147mm] Weight: 3.3 lb [1500g] Wheelbase: 11.6" [295mm] Technical Support Information For technical assistance, contact: DuraTrax Product
Bigfoot (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Bigfoot (Model 36084-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
... REQUIRED READING...
REQUIRED READING.........UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing the DOMINATOR! Within this kit you will find a race winning car with over 25 years worth of CUSTOM WORKS design
Installation Instructions Camaro Rear StrongArms. Part # Camaro Rear StrongArm Kit.
Part # 11505899-2010-2015 Camaro Rear StrongArm Kit Recommended Tools 2010-2015 Camaro Rear StrongArms Installation Table of contents Pages 2-4... Included Components Page 5... Locking Plate and Camber
- 3 -
- 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - 1/8th Scale Electric 4WD GT Car MGT7 ECO Parts List E2103 FRONT
USE THE PARTS LIST BELOW TO MAKE SURE YOUR KIT IS COMPLETE BEFORE INSTALLATION. IF ANY PIECES ARE MISSING, PLEASE CONTACT:
1962-1967 Chevy Nova Pro-Touring Front Suspension Installation Instructions Tech line: 1-855-693-1259 www.totalcostinvolved.com Read and understand these instructions before starting any work! USE THE
Replacement Parts List Part Number Description Price
TM Replacement Parts List Part Number Description Price LOSA1022 Front Axles for XX-T Wheels (GTX, NXT, XXX-T)...$6.00 LOSA1113 Front Shock Tower (Desert Truck)...$5.99 LOSA1118 Front Suspension Arms (Desert
RS-LM Parts List 1. GEAR DIFFERENTIAL/SOLID FRONT AXLE. The car can use either 2 differentials, front and rear or Solid Axle in the front.
RS-LM Parts List 1. GEAR DIFFERENTIAL/SOLID FRONT AXLE The car can use either 2 differentials, front and rear or Solid Axle in the front. Other differentials may work with the car. I used 3racing differentials
E-Revo (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. E-Revo (Model 56036-4) Parts List Bearings & Bushings 4609 Ball bearings (5x10x4mm)
SUSPENSION 2-1 SUSPENSION TABLE OF CONTENTS
XJ SUSPENSION 2-1 SUSPENSION TABLE OF CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION... 7 page REAR SUSPENSION... 16 ALIGNMENT TABLE OF CONTENTS page AND WHEEL ALIGNMENT...1 DIAGNOSIS AND TESTING SUSPENSION
:: Other Helpful Items
:: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new vehicle. Please take a moment to read through
E-Revo (Model 5603) Parts List
E-Revo (Model 5603) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings
E-Revo: TQi 2.4GHz Radio (Model 5603) Parts List
E-Revo: TQi 2.4GHz Radio (Model 5603) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars.
Manufactured By: CustomWorks RC Products LLC 760-B Crosspoint Drive Denver, NC #0928 ENFORCER GSX2 RACING KIT
#0928 ENFORCER GSX2 RACING KIT Manufactured By: CustomWorks RC Products LLC 760-B Crosspoint Drive Denver, NC 28037 www.customworksrc.com REQUIRED READING.........UNDERSTAND THIS MANUAL! Thank You and
#0926 ENFORCER G6 DIRECT DRIVE RACING KIT
#0926 ENFORCER G6 DIRECT DRIVE RACING KIT Manufactured By: 760 Crosspoint Drive Denver, NC 28037 www.customworksrc.com REQUIRED READING...UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing
E-Revo (Model ) Parts List
E-Revo (Model 56036-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings
BIND ST-TRIM TH-TRIM ST-D/R
4 4 4 4 BIND ST-TRIM TH-TRIM ST-D/R 1. Put the battery in the car. 2. Install the battery. 3. Turn on the transmitter. Connect firmly. 4. Turn on the electronic speed controller. ON OFF AX80084 UV Joint
1970 Trans-Am Mustang Front Suspension Instructions. Manual, Volume One, Chassis. Special instructions and precautions will be given
1970 Trans-Am Mustang Front Suspension Instructions 1. This kit was designed to be used in conjunction with the Rear Suspension kit. 2. This conversion follows standard procedures as described in the 1970
Manufactured By: #0723 OUTLAW 3-SHOT RACING KIT. 760 Crosspoint Drive Denver, NC
Manufactured By: #0723 OUTLAW 3-SHOT RACING KIT 760 Crosspoint Drive Denver, NC 28037 www.customworksrc.com REQUIRED READING...UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing the OUTLAW
Chevy Nova Pro-Touring Front Suspension Installation Instructions
1962-1967 Chevy Nova Pro-Touring Front Suspension Installation Instructions 1-800-984-6259 www.totalcostinvolved.com 1 Pro-Touring Clip A-Arm Assembly Sway Bar Assembly Fender Panel Kit 8 7/16-20 * 1 ¼
ROLL CENTER You can adjust the front and rear roll centers of the XB8 by changing the mounting locations of various components.
Your XRAY XB8 luxury nitro buggy is a top competition, precision racing machine that features multiple adjustments that allow you to set up for any track condition. The XB8 includes innovative set-up features
INSTALLATION INSTRUCTIONS Chevrolet Nova Superide II Independent Front Suspension
INSTALLATION INSTRUCTIONS 1962 1967 Chevrolet Nova Superide II Independent Front Suspension Please read these instructions completely before starting your installation. Assemble suspension on vehicle before
X-Wide Body Red Standard 78T Big Shot Red Standard Trim inside corners of Foam inserts.
SUPER DIALED SETUP! KIT SETUP 0 24mm, Arms level -1 30 No 27.5wt. #56 Orange None Bottom Narrow Rack None 3-B, 1-Ball Stud Washer 3-Middle Short Yes, on Tower 3 Pivot, 0 Hubs 2 23mm, Dogbones just under
1 HR-301/D Parts Manual. Table Of Contents
Table Of Contents 301/D Parts Manual 3 Point Hitch...2 Pull-Type Hitch...4 Main Frame...6 Angle Adjuster - Serial Number 44982 & Prior...8 Rotor Assembly - Serial Number 44982 & Prior...10 Rotor Assembly
Additional equipment and parts needed: Tools needed: Disclaimer: Warnings: Warranty:
Introduction Thank you for purchasing the Tekno RC SCT410.3 1/10th Scale Electric 4WD Competition Short Course Truck. The SCT410.3 is an improved version of the already great SCT410. We are always working
DTXC4129 ST...Bumper Front...55 x1pc. DTXC4127 ST...Bulkhead Center Differetial...16 x1pc,
Replacement arts Stock #...escription 4100...ir ilter Set...10,11,1,1,14, x1pc 4101...ir ilter lement...1 x1pc 410...all up Set Rear...0,1,, xpcs 410...all nd.8 x mm...1 xpcs 4104...all nd.8 x 9mm... xpcs
TITAN CATALOG 2013 HEX WRENCH & TOOLS RACING EQUIPMENT
HEX WRENCH & TOOLS 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 11015 11020 11320
INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT
COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we should
Telluride 4X4 (Model ) Parts List
Telluride 4X4 (Model 67044-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings
U1 PUMP PARTS PRICE LIST
006-014 - 015-018 - 024-U1 PUMP PARTS PRICE LIST ITEM 1 7 8 9 DESCRIPTION QTY. PER PART PUMP 006-U1 Pump Body 1 See Note 1 1 006-U1 Pump Body with Flush 1 See Note 1 1 015-U1 Pump Body 1 See Note 1 1 015-U1
REAR AXLE PARTS.BOOK SS-842 DATE: SPICER PS-7036 AXLE USED WITH PS-1350 AXLE STEERING CYLINDER & steering CYLINDER
:. :. :. - I _ REAR AXLE PARTS.BOOK SS-8 o DATE: 7--9 SPICER PS-703 AXLE USED WITH PS-350 AXLE 7-9-30 STEERING CYLINDER & 7-9-3 steering CYLINDER o BARAGA PRODUCTS, INC. 55 N. Superior AYe. Baraga. Ul
Part # GM G Body Air Suspension System
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11320298 78-88 GM G Body Air Suspension System Front Components: 1 11323001 HQ Series Front Shockwaves
Z-CAR ZMXT-8 RTR RTR NITRO OFF-ROAD
TEST DRIVE EXCLUSIVE! Z-CAR ZMXT-8 RTR RTR NITRO OFF-ROAD THIS TRUGGY BREAKS THE MOLD WORDS KEVIN HETMANSKI kevinh@airage.com PHOTOS JOSEPH ARTHUR Z-CAR, A DIVISION OF SH ENGINES, is distributed exclusively
Install steering rack assembly to chassis using x 3/8 stainless flat head socket screws and 2-6.4mm x 1.1mm blue aluminum spacers as shown.
Install steering rack assembly to chassis using 2-4-40 x 3/8 stainless flat head socket screws and 2-6.4mm x 1.1mm blue aluminum spacers as Qty 2, 4-40 x 3/8 fhcs Qty 2, 6.4mm x 1.1mm blue aluminum spacer
REAR AXLE PARTS BOOK
r ---------I,-L-'-------------._. r r r r REAR AXLE PARTS BOOK TH636C TH644C TH84C TH844C DATE: 1-7-05 SPICER CLARK-HURTH 1/541 AXLE 7-9-619 STEERING ~ER TEREX HANDLERS 455 N, Superior Ave., Boraga, MI
TORC SERIES COMPETITION RULES FOR SPORTSMAN 1600 BUGGY
TORC SERIES COMPETITION RULES FOR SPORTSMAN 1600 BUGGY DEFINED AS- A limited 4-wheel vehicle utilizing a type-1, 1600 c.c. Volkswagen air-cooled engine with one person in the vehicle. Division rules supersede
Make these adjustments before racing
FINAL ADJUSTMENTS ADJUSTING CAMBER To set the camber we recommend using our supplied #1719 camber/rear toe-in gauge. When adjusting camber you need to have the car ready to run with no body. Make these
1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES
1:8 SCALE CATALOG Stock is extremely limited. Parts listing as of 7/2001. Sale prices apply to orders direct from Associated only. Items available while supplies last. Items marked Not available or are
RHINO SUSPENSION SYSTEM INSTALLATION INSTRUCTIONS
PARTS INCLUDED: 2 FRONT UPPER A-ARMS 2 FRONT LOWER A-ARMS 2 UNI-BALL JOINTS 2 UNI-BALL JOINT STUDS 2 UNI-BALL JOINT CAPS 2 RETAINING RINGS 1 FRONT SHOCK ASSEM. 2 DELRON STEERING STOPS 2 SHOCK MOUNT SPACERS
Installing the Custom IFS
35-40 Ford Car & 35-41 Ford Truck Chassis Custom IFS & 4-Link Install Instructions Tech Line: 1-855-693-1259 www.totalcostinvolved.com Read and understand these instructions before starting any work! USE
Parts Manual for PRO GEAR EXPRESS MID-SIZE WALK BEHIND MOWERS SERIES 0 & 1 POWER UNIT MODEL SPE1250KW SPE140KW SPE150KH SPE151KW SPEL150KH
Parts Manual for PRO GEAR EXPRESS MID-SIZE WALK BEHIND MOWERS SERIES 0 & 1 POWER UNIT MODEL SPE10KW SPE0KW SPE10KH SPE11KW SPEL10KH MOWER UNIT MODEL SPE30 SPE480 SPE31 SPE481 IT IS POLICY OF SNAPPER TO
U2 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 PUMP 180-U2 Pump Body 1 See Note 1 1 180-U2 Pump Body with Flush 1 See Note 1 1 184-U2 Pump Body 1 See Note 1 1 184-U2 Pump Body with Flush 1 See Note 1 1 220-U2 Pump Body 1 See Note 1 1 220-U2
Installing the Custom IFS Installing the lower control arms:
33-34 Ford Car & Truck Chassis Custom IFS & 4-Link Install Instructions Tech Line: 1-855-693-1259 www.totalcostinvolved.com Read and understand these instructions before starting any work! USE THE PARTS
1940 Hudson SERVICING THE FRONT SUSPENSION SYSTEM
1940 Hudson SERVICING THE FRONT SUSPENSION SYSTEM Source of this material is from 1940 Series, Issue 3, November-December Hudson Service Magazine SERVICING THE FRONT SUSPENSION SYSTEM No set rule can be
48ZS. 48 STANLEY Zero Turn Riding Mower. Kawasaki FR600V Engine
48ZS 48 STANLEY Zero Turn Riding Mower Kawasaki FR600V Engine 48ZS Deck Parts Diagram Key Item # Gxi Part Number Description 1 SP11-000083 Pulley guard, 48Z, left and right black plastic guard, screws
#0923 ENFORCER GBX3 RACING KIT. Manufactured By: 760-B Crosspoint Drive Denver, NC
#0923 ENFORCER GBX3 RACING KIT Manufactured By: 760-B Crosspoint Drive Denver, NC 28037 www.customworksrc.com REQUIRED READING.........UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing
Manufactured By: #0925 ENFORCER G6 GEARBOX RACING KIT. 760 Crosspoint Drive Denver, NC
Manufactured By: #0925 ENFORCER G6 GEARBO RACING KIT 760 Crosspoint Drive Denver, NC 28037 www.customworksrc.com REQUIRED READING...UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing the
To Order Call (562)
451 Park Industrial Dr. La Habra CA 90631 Phone: (562) 691-7006 Fax: (562) 691-5708 www.kugelkomponents.com 2017 PRICE SHEET #17 INDEPENDENT FRONT SUSPENSION SYSTEMS For All IFS Powder Coated (Black Only):
Pony V Page 1 of 24 Battery Mounting Bracket
5151 Pony V Page 1 of 24 Battery Mounting Bracket 5151 Pony V Page 2 of 24 Battery Mounting Bracket 2 9296 2 CABLE- battery (replaces #9223) 4 9224 1 CLIP- vent tube shield (small) 6 9826 2 NUT- hex, 5/16"-24
Caution. Electronic Speed Controller Instructions. Needle Nose Pliers Awl RCE3003 HD Grease. Fusion Tire Glue. RCE3004 Super Diff Lube
Caution Please read the following manual closely and familiarize yourself with its contents before operating the model. Keep the manual in a safe place for future reference for repairs, part numbers and
PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING.
INSTRUCTION MANUAL PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING. REQUIRED FOR OPERATION THINGS NEEDED You will need to buy a few items
Rustler 4X4 (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler 4X4 (Model 67064-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
Ford Passenger Cars Mustang II Independent Front Suspension Installation Instructions
1935-1948 Ford Passenger Cars Mustang II Independent Front Suspension Installation Instructions 1-866-925-1101 www.totalcostinvolved.com The installation of the Total Cost Involved's Mustang Independent
Alberta AADL Order Form XL5 and XL5ci manual wheelchair
lberta L Order Form XL5 and XL5ci manual wheelchair ate: P.O.#: ccount#: Made for (client): Ordered by: 2018-11-29 Organization: ddress: Phone: Fax: ONFIRM ORER Y E-MIL Yes No SUSRIE TO PHYSIPRO NEWSLETTER
Part # GM F-Body Front TruTurn System GM F-Body TruTurn System. Table of contents. Installation Instructions
Part # 1119599-190-191 GM F-Body Front TruTurn System Recommended Tools 190-191 GM F-Body TruTurn System Installation Table of contents Page... Included components Page... Upper Control Arm Components
HEIDTS SUPERIDE IRS INSTALLATION INSTRUCTIONS INDEPENDENT REAR SUSPENSION
HEIDTS SUPERIDE IRS INDEPENDENT REAR SUSPENSION Please read these instructions completely before starting your installation. Remember the basic rule for a successful installation: Measure Twice, Weld Once.