Lamps. Compact Fluorescent Lamps. Audio, Office and Electrical. Lamps

Transcription

1 Page Page Compact Fluorescent LED Fluorescent Tubes Low Voltage Tungsten Halogen Insect/Germicidal Mains Voltage Tungsten Halogen Lampholders & Starters Metal Halide Energy Saving Compact Fluorescent GLS Watts Equiv. Length Order Code W 40W 145mm W 60W 155mm W 75W 165mm W 100W 175mm W 40W 145mm W 60W 155mm W 75W 165mm W 100W 175mm Energy Saving Candle GLS Watts Equiv. Length Order Code S 3W 20W 120mm W 40W 130mm S 3W 20W 120mm W 30W 120mm W 40W 130mm W 30W 120mm W 40W 130mm W 60W 130mm W 20W 120mm W 30W 120mm W 40W 130mm W 60W 130mm Mini Energy Saving Ì Ideal as direct replacements for GLS mains voltage Ì Suitable for indoor and enclosed outdoor light fittings Ì Diameter: 41mm Ì Ideal as direct replacements for GLS mains voltage candle Ì Suitable for indoor and enclosed outdoor light fittings Ì Diameter: 42mm Ì Ideal as direct replacements for GLS mains voltage Ì Suitable for indoor and enclosed outdoor light fittings Ì Diameter: 40mm GLS Watts Equiv. Length Order Code S 5W 25W 124mm W 40W 112mm W 60W 122mm W 75W 132mm W 40W 112mm W 60W 122mm W 75W 132mm Energy Saving Globe GLS Watts Equiv. Length Order Code W 100W 168mm W 120W 178mm W 100W 168mm W 120W 178mm Mini Spiral Compact Fluorescent GLS Dims. Watts Equiv. (LxDia) mm Order Code W 35W 87 x W 45W 110 x W 35W 87 x W 45W 110 x Spiral Compact Fluorescent Ì Ideal as direct replacements for GLS mains voltage Ì Suitable for domestic and workplace applications Ì Diameter: 110mm Ì Energy saving replacements for GLS mains voltage Ì Smaller size for more discreet applications Ì Suitable for indoor and enclosed outdoor light fittings Ì Voltage: V Ì Energy saving replacements for GLS mains voltage Ì Suitable for indoor and enclosed outdoor light fittings Ì Voltage: V Not suitable for use with dimmers, photocells or timer devices 2981

2 Compact Fluorescent - continued Spiral Compact Fluorescent - continued GLS Dims. Watts Equiv. (LxDia) mm Order Code W 55W 113 x W 75W 128 x W 100W 138 x W 125W 155 x W 55W 87 x W 55W 113 x W 75W 128 x W 100W 138 x W 125W 155 x Compact Fluorescent Ì For use as a direct replacement for candle or GLS mains voltage Ì High luminous intensity (white light) Ì Average life 8000 hours Ì Typical emission colour: 2700k Ì Low running temperature Ì Helical tube design gives an even 360 light output Non Dimmable Watts Dims. (HxDia) Order Code W 10838mm x W 10838mm x W 11338mm x Watts GLS Equiv. L x Dia. (mm) Order Code R50 - SES 4W 20W 95 x R63 - ES 7W 40W 125 x R80 - ES 11W 60W 130 x Low Energy GU10 Ì Low energy fluorescent designed to be a like for like fit to existing mains halogen Ì Mains voltage GU10 fittings Ì 70% reduction in heat output, 70% saving in energy consumption and up to 90% decrease in UV output Ì Diameter: 50mm Watts GLS Equiv. Length (mm) Order Code Warm White k 7W 40W W 50W W 60W Cool White k 7W 40W W 50W W 60W Blacklight Fluorescent Ì Ultra compact blacklight blue light source Ì 8000 hours life Ì 25W output Ì Available in Bayonet & Edison fitting Ì Woods glass tube maximum UV output Ì Integral electronics, no external control gear needed Low Energy Daylight Ì Spiral compact fluorescent for use as direct replacements for GLS mains voltage Ì Produces a quality of light very close to natural daylight Ì Even 360 distribution of light Ì Suitable for indoor and enclosed outdoor light fittings Ì Integral rapid start electronic circuit Ì Colour Temperature: 6400k Watts GLS Equiv. L x Dia. (mm) Order Code W 60W 101 x W 75W 108 x W 100W 113 x W 125W 115 x W 150W 170 x W 60W 101 x W 75W 108 x W 100W 113 x W 125W 115 x W 150W 170 x Low Energy Reflector Fitting Order Code BC ES Double D Ì Low energy, long life for domestic and commercial applications Ì For use with indoor and outdoor bulkheads Ì High light output Ì 2 pin and 4 pin versions Ì 10,000 hours average lamp life Ì Popular white finish Ì 3500K colour temperature Ì Compatible with all current control gear Wattage Lumens L x W (mm) Order Code Pin - GR8 Cap 16W 1050lm 132 x W 2250lm 196 x W 3000lm 198 x Pin - GR10q Cap 16W 1050lm 132 x W 2250lm 196 x W 3000lm 198 x Ì Up to 80% energy saving over standard equivalent Ì Compact fluorescent reflector Ì Ideal for replacing standard reflector and GLS The first online technical portal for design engineers Log on, research, refine and design 2982

3 CFL Square Wattage Colour Temp. Lumens Order Code Pin - GR8 Cap 16W 2700K 1050lm Pin - GR10q Cap 28W 3500K 2050lm W 2700K 2700lm W 3500K 2700lm Circular Fluorescent Tube 5W 7W 9W 11W Supply Voltage Ì Low-profile compact fluorescent Ì Ideal for indoor and outdoor luminaires Ì Uniform distribution of light Ì 2 pin and 4 pin versions Ì 10,000 hours average lamp life Ì Dimensions: - 16W (LxW): 141 x 138mm - 28W/38W (LxW): 207 x 205mm Ì Circular fluorescent lamp Ì 22W cool white with G10 base Ì Suitable replacement for Inspection/Magnifier luminaire Ì High energy efficiency with long life Ì Diameter 29mm List No. Order Code CI Dulux S and D Comparison of light outputs S =250 Im = 25W =400 Im = 40W =600 Im = 60W 10W =900 Im = 75W 13W 220 to 240V ac 50Hz Average Lamp Life (using suitable ballast circuit) D =600 Im = 60W =900 Im = 75W 8000 hours Rating Colour List No. (W) Temperature Order Code Dulux S DS cool DS cool DS cool DS cool Dulux D DD warm DD warm Ì Five times higher efficiency Ì Longer lifespan (typically 8 times longer) Ì Reduced maintenance costs Available in two colour correlated temperatures 2700K warm (similar to tungsten filament) and 4000K cool (similar to standard fluorescent). D Lamp L = 118 (10W), 153 (13W), W =34, D = 34 S Lamp L = 108 (5W), 138 (7W), 168 (9W), 238 (11W) W = 34, D = Length List No. Wattage Colour (inc. base) Order Code DT Interna DT Cool White DT Interna DT Cool White Dulux D/E For HF and Dimming Systems Length List No. Wattage Colour (inc. base) Order Code DDE134 13W Cool White DDE264 26W Cool White Dulux T/E Length List No. Wattage Colour (inc. base) Order Code DTE424 42W Cool White Dulux L Lumilux Ì Designed to replace conventional tubes in modern 600x600mm modular luminaires Ì Four pin base requires the use of an external starter for operation on conventional control gear Ì Suitable for operation on HF electronic control gear and for dimming systems Ì Offers very good colour rendering List No. Wattage Colour Length Order Code DL W Cool White DL W Interna DL W Cool White DL W Cool White DL W Interna DL W Cool White Fluorescent Tubes T8 Lumilux Plus Eco Fluorescent Tubes Ì A compact double turn lamp without integral starter Ì The four pin G24q base allows operation from normal electronic and dimmable electronic control gear Ì Small size and symmetrical luminous distribution make these ideal for compact, low profile luminaires Ì Directly interchangeable with equivalent wattage Osram Dulux D/E Ì The new triple turn technology reduces the length to 2/3 of the equivalent Osram D/E Ì Without integral starter, these are for use with HF control gear and dimming systems Ì Ideal for compact luminaires and downlights Ì Reduced mercury content over other tubes Ì Exceptionally high lumen output Ì High efficacy with good colour rendering Ì Use with Osram Quicktronic professional electronic control gear Ì Available in three colour temperatures Ì 26mm diameter Ì G13 base Dulux T Ì Directly interchangeable with equivalent wattage Osram Dulux D Ì The new triple turn technology reduces the length to 2/3 of the equivalent Osram D Ì Complete with integral starter and RF suppression capacitor, these are for use with conventional control gear Ì Ideal for compact luminaires and downlights Wattage (feet) pins) Colour List No. Order Code Warm White L Cool White L White L Cool White L White L Warm White L Cool White L White L White L

4 Fluorescent Tubes - continued T8 Lumilux Plus Eco Fluorescent Tubes - continued List No. Order Code L L L L L L L L L T8 Triphosphor Coated Fluorescent Tubes Master TL-D Super 80 Ì A range of fully recyclable fluorescent tubes in varying colour temperatures Ì Highly efficient 3-band fluorescent coating in combination with New Generation pre-coating technology Ì hours average life on high frequency gear, hours on switch start Colour Price Per Pack Temp. Colour Order Code W - 600mm 3500K White K Cool White K Cool White W mm 3500K White K Cool White K Cool White W mm 3500K White K Cool White K Cool White W mm 3500K White K Cool White Shatter Resistant T8 Fluorescent Safety Ì Polymer coating contains the glass and chemical debris for quick, easy and safe disposal Ì Prevents widespread glass contamination from accidental lamp breakage Ì Impact tested to IEC (5 joules) 6m Ì FEP shatterproof coating outperforms lamp life NB. These are branded with a Glass Guard FEP coating , Ì High initial lumen output Ì G13 fitting Ì Diameter: 26mm Ì Supplied in packs of Ì Passes all food hygiene audits including the B.R.C. Ì Operational in both open and enclosed IP65 fittings Ì Coating will not discolour or degrade Ì Superior colour rendering Ì W = White (835), CW = Cool White (840) Ì Service life: Ì - Standard: 15-20,000 hours Ì - Long Life: 50,000 hours Length Watts Colour Order Code Standard 450mm 15W W mm 18W W mm 30W W m 58W W mm 18W CW m 36W CW m 70W CW Long Life 600mm 18W CW m 36W CW T5 Plus High Efficiency Fluorescent Tubes T5 - Triphosphor Coated FHO 24W Cool White W Cool White Wattage Length Colour Order Code 14W 550 Cool White List No. Order Code FH Ì T5 FHE/FHO Ì FHO versions (Fluorescent Ì Average rated life of 16,000 hours High Output) for use when Ì Warm white and cool white deluxe triphosphor coatings a higher output is required Ì FHE versions (Fluorescent High Efficiency) for use Ì G5 fitting where efficient direct lighting in low profile luminaries is Ì 16mm diameter required Wattage Colour Length mm Order Code FHE 35W Cool White Miniature T5 Ì Miniature fluorescent tubes commonly used in display cabinets, effects lighting, vending and amusement machines Ì G5 fitting Ì 3500K white colour temperature Ì 16mm tube diameter Price/Pack Wattage Length Order Code W W W W MR16 LED Lamp Ì Superior colour rendering from T5 tubes Ì New generation of high efficiency tubes Ì Includes triphosphor technology for superior lumen maintenance Ì 16mm diameter Ì G5 base LED Ì Ideal for point-focal or decorative illumination Ì Long-life with low-heat development Ì Can easily be set in halogen sockets Voltage 12V Wattage 2W Base GX5.3 / GU5.3 Average Life (Hours) Dimensions (HxDia) 35mm x 50mm Weight 36g , Colour No. of LEDs Lumens Order Code White

5 12V MR16 LED Technical Data Voltage 12V Base GX5.3 / GU5.3 Average Life (Hours) Dimensions (HxDia) 40 x 50mm No. of LEDs Wattage Order Code W W Ì Ideal replacements for low voltage halogen Ì Longer life with low heat and low power consumption Ì 50,000 hours average life Ì Closed front Ì Colour: White Cooker Hood Lamp Order Code Infra-Red Heat Ì Clear glass filament designed specifically for cooker hoods Ì Vibration proof Ì 1000 hours average life Ì SES fitting Ì Dimensions (Dia x L): 25 x 82mm Ì Voltage: 230/250V GU10 DioTronic LED Ì Ultra long life up to 30,000 hours Ì Available with various coloured LEDS Ì Low power (1.8 to 2W) consumption Ì 15x ultra bright LEDs Colour Order Code Blue Red White Dio-Tronic GU10 LED Ì Closed front Ì Ideal replacement for PAR16 HI SPOT ES50 with its GU10/GZ10 direct retrofit Ì Single source, high power LED, ideal for display and effect lighting Ì Rich colour performance Ì Outstanding long life - 50,000 hours Ì Optical quality lenses of glass and acrylic Ì Mains voltage GU10 fittings Ì Beam angle: 35 Ì Dimensions (LxDia): 58 x 51mm Hard Blown (R125) Order Type Watts List No. Code Hard Blown 250W Hard Pressed 100W Hard Pressed 175W Low Voltage Tungsten Halogen 50mm Low Voltage Halogen Hard Pressed (PAR38) Ì Infra-red tungsten filament heat in both R125 and PAR38 styles Ì 5000 hours average life Ì Hard Blown version (R125) resisitant to thermal shocks, such as water splashes, making it suitable for industrial applications Ì Hard Pressed versions have a high-efficiency reflector and refractor lens design, allowing accurate heat direction to where it is needed Ì ES fitting / /250V Ì Closed face halogen for low voltage applications Ì 3000 hours average life Ì Dichroic reflector and clear lens Ì GU5.3 fitting Ì Diameter: 50mm Ì Voltage: 12V Watts Order Code White 3W Warm White 3W Oven Oven Watts Size (Dia x L) Order Code W 22 x 50mm W 25 x 55mm W 45 x 75mm Ì Clear glass filament for ovens and other hot environments Ì 1000 hours average life Ì SES fitting Ì Temperature rating: 300 C Watts Beam Angle Order Code W 10 (Spot) W 36 (Flood) W 10 (Spot) W 36 (Flood) W 10 (Spot) W 36 (Flood) mm Low Voltage Halogen M11 Decostar 35S Ì Integral glass front cover maintains the brilliance of the dichroic reflector whilst protecting if from dust and humidity Ì Produces high light output with uniform illumination Ì Incorporates special UV absorbing quartz bulbs meeting the latest standards Ì Suitable for operation in open luminaires Ì Average life 2000 hours Ì GU4 base Dia=35mm, L= Lamp List No. Watts Reference Order Code M200 10W wide flood WFL M252 20W spot SP M221 20W wide flood WFL

6 Low Voltage Tungsten Halogen - continued Long Life Low Voltage Halogen Capsule Ì Single-ended, low voltage (12V) capsule Ì Xenon filled for extended life Ì Can be operated in any position Ì Low-pressure, ideally suited for use in open luminaires Ì UV stop Ì Space between pins: G4 = 4mm, GY6.35 = 6.35mm Watts Order Code G4 Fitting 10W W GY6.35 Fitting 35W W Low Voltage Halogen Capsule CAPSULEline Pro Ì Single-ended low voltage halogen capsule, giving crisp white halogen light of professional quality Ì Ideal for task lighting and decorative applications in homes, shops, hotels and restaurants Ì 3000 hours average life Ì Suitable for use in open luminaires Ì Low pressure standard with UV-Block glass Voltage Watts LIF Code Order Code G4 Fitting 12V 10W M V 20W M V 20W M GY6.35 Fitting 12V 20W M V 35W M V 50W M V 75W M V 100W M V 50W M V 100W M Projection Ì A range of dichroic and capsule for conventional and overhead projection Ì Precision built for tight optical control Mains Voltage Tungsten Halogen GU10 Halogen Watts Order Code W W W GU10/GZ10 Halogen GU10 Xenon Watts Order Code W W W Ì Aluminised reflector lamp PAR16 with GU10 base Ì Tempered glass front cover Ì 2000 Hours average life Ì Beam Angle: 36 (Flood) Ì Enclosed front halogen for precision and decorative lighting Ì 2000 hours average life Ì Available as either GZ10 Dichroic reflector or GU10 Aluminium reflector Ì Diameter: 50mm Ì Wattage: 50W Fitting Beam Angle Order Code GZ10 30 (Spot) GZ10 (Flood) GU10 (Spot) GU10 (Flood) Hi-Spot Mains Voltage Tungsten Halogen Ì Ideal for areas where low maintenance is essential Ì Mains voltage GU10 fittings Ì 5,000 hours average life Ì Low pressure UV stop Ì Aluminised reflector Ì Clear enclosed front Ì Beam Angle: 25 (Flood) Ì Dimensions (LxDia): 50 x 50mm Voltage Watts Cap LIF Code Order Code Dichroic 50mm 12V W75 GZ6.35 A V W100 GZ6.35 A V W150 GZ6.35 A V W250 GX5.3 A Capsule 12V W50 G6.35 A V W100 G6.35 A V W150 GY6.35 A V W150 GY6.35 A V W400 GY6.35 A V W500 GY9.5 A TROUBLESHOOTING TIPS Chat online to one of our technical engineers at farnell.com Ì Very high quality range of 240V mains halogen Ì Brilliant light without the need of a transformer Diameter Wattage Base Beam x Length Life h Order Code W GU10 50x W GU10 51x W GU10 51x W GU10 64x W GU10 64x W E x W E x W E x W E x W E x W E x W E x W E x W E x Ì Compact size Ì Long life (between hours depending on size) Ì Available in GU10, GZ10, E14 and E

7 G9 Halogen Capsule Ì Single-ended, twin fused halogen capsule Ì G9 fitting Ì UV stop Ì Available in clear or frosted finish Germicidal List No. Order Code W 305mm 8TUV/S 240V W 457mm 15TUV/S 240V Metal Halide PowerStar High Intensity Metal Halide Watts Order Code Clear 25W W Frosted 25W W Halopin G9 Halogen Capsule Double-Ended Halogen Ì Suitable for use in open luminaires Ì Integral safety fuse Ì 2,000 hours average life Ì Robust filament support thanks to bulb-pinch technology Ì Complies with the strictest UV protection thresholds Ì G9 fitting Ì Dimmable Watts Order Code Clear 40W W W Frosted 25W W Length Watts Order Code V 80mm 100W mm 150W mm 200W mm 250W mm 200W mm 300W mm 500W V 118mm 300W mm 500W , Ì Rough service linear tungsten halogen Ì Ideal for use in rough-service applications, interior uplights and external floodlights Ì 2,000 hours average life Ì Triple support HQI-TS Double Ended Watts Cap Length (mm) Colour Order Code HQI-TS Double Ended 70W RX N W RX7s WW W RX7s N HQI-E Elliptical 400W ES(E40) 290 D HQI-T Tubular 250W ES(E40) 225 D W ES(E40) 275 D Dichroic-GU5.3/GX5.3 GU5.3 H=22.2 (including clip), W=19.2, D=17 2 mtg holes Dia 12 ctrs Lead Length=140 Lampholders & Starters Order Multiple=5 Type Order Code GU GX Ceramic Lampholders E27 (ES) and E14 (SES) GX5.3 H=16.8, W=18.6, D= mtg holes Dia 12ctrs Lead Length=140 HQI-T Tubular HQI-E Elliptical Ì Metal halide that produce a crisp white light and distinguish themselves by their high luminous efficacy and excellent colour rendering Ì Ideal for inside and outside display lighting, shops, supermarkets, hotels, car parks and stadia Ì Replace like-for-like in lamp types and wattages Ì Complete with a UV stop quartz jacket Ì Colour temperatures are Warm White (WW), Neutral (N) and Daylight (D) Low voltage dichroic lamp holders designed to accomodate GU5.3 and GX5.3 style. Max voltage 50V Ì Ceramic lampholders for E27 and E14 Ì Suitable for applications where high temperatures are produced Ì Connection by means of screw connectors can be made from either above or from two sides Ì Mounting holes provided Germicidal Safety Shatterproof Insect/Germicidal Fitting Dimensions (H x W) Mounting hole size E27 (ES) 44 x x 4.2 E14 (SES) 44 x 30 Ø3.6 Fitting Order Code ES SES Ì Destroys bacteria, germs and other potentially damaging biological organisms Ì Not suitable for use in food preparation areas Ì Made from F.E.P no toxic UV retardants Ì Less than 5% light loss through coating Ì FDA approved in compliance with 21 CFR Ì Resistant to heat and fire to IEC /0, 168 hours Working temperature -25 C to 50 C Max operating temperature 20,000 hours at 180 C Melting point 260 C IMPROVED BACK ORDER DELIVERY Receive updates with the exact status, due date and despatch information of all your back order items farnell.com 2987

8 Lampholders & Starters - continued E27 Lampholder Weight (g) 72 Length x Dia. 59 x 44.5 Temperature rating C 210 E E27 Lampholder Ì Snap in or screw fixing Ì Moulded from PPS Weight (g) 17 Length x Dia. 46 x 40 Temperature rating C 240 E BC Lampholder Weight (g) 13 Length x Dia x 37.8 Temperature rating C 210 B22d G23 Lampholder Ì Manufactured from white porcelain Ì Snap in or screw fixing Ì Connection via screw terminal Ì Snap in or screw fixing Ì Moulded housing Ì Manufactured in white PBT Ì Horizontal screw fixing Ì Wiring through the rear Weight (g) 14 Length x Width x Depth 37.2 x 35 x 32.1 Temperature rating C 140 G Lamp Wattage 4 Pin 10-13W W /32W W Pin 10-13W W /32W Fluorescent T5 Order Multiple=10 Snap In Push On Fluorescent T8/T12 A range of snap-fit or screw fixing lampholders with a unique airpass-rotor system, resulting in cooler running temperatures. A mild steel bracket is available for end mounting lampholders. Order Multiple=10 Screw, end mounting Snap-fit, bottom mounting Snap-fit, end mounting Fixing bracket Screw (end mounting) H=27, W=25 Mountings 2 holes Dia 26 ctrs 3. Snap-fit (end mounting) H=27, W= Ì Manufactured from white polycarbonate Ì Phosphor bronze contacts Ì 500V rated Ì Operates up to 110 C 2. Snap-fit (bottom mounting) H=38.5, W=25 4. Fixing bracket H=, W=35 2 fixing holes Dia 24 ctrs G 11 Lampholder Ì Manufactured from white PBT Ì Screw fixing either horizontally or vertically Weight (g) 14 Length x Width x Depth 47.5 x 37.5 x 18.5 Temperature rating C 140 Fluorescent-Push on Polycarbonate push-on lampholders accepting T8 or T12 fluorescent tubes. The lampholder is designed for electrical connection only when the lamp is supported by clips or other means. 2G G24 + GX 24 Lampholders Ì Snap in or vertical screw in fixing Ì Threaded barrel Ì Manufactured in white PBT Ì Available in 2 pin and 4 pin for various wattages Weight (g) 20 Temperature rating C 140 Length x Dia x 40 T8 Dia.=29 T12 Dia.=40 Order Multiple=10 Type T T

9 Fluorescent Lamp Starters 2 pin standard glow type fluorescent lamp starter designed to fit a wide range of single circuit fluorescent lighting units from 4 to 80 watts. 200 to 250 volts. The canister is manufactured from high impact material and incorporates a radio interference suppression capacitor. Length (excluding pins) 35mm Pin pitch 12.7mm Diameter 21.5mm Order Code Fluorescent Starters W Fluorescent Tube Starter Switches Ì Radioactive-free glow switch starters for fluorescent Ì Secure, safe and fast lamp ignition on both L and LC systems according to IEC Ì Radio-interference suppression capacitor Ì 200 way Watts Order Code W Ì High quality two pin glowstarters Ì Housed in high impact polycarbonate Ì Solderless interior juctions give very high reliability Ì Fitted with an internal radio interference suppression capacitor Supply voltage 220V ac 50Hz Dimensions: L = 36.0 (40.3 including pins), Dia= Tube Rating List No. Order Code W and below 155/ W - 125W 155/ Electronic Pulse Starter L=35 (40 incl. pins), Dia=21 Ì Suitable for most fluorescent fittings up to 125W Ì Starter extends tube life by preheating the cathode heaters before attempting to strike Ì Starter automatically shuts down if a tube fails, eliminating heat build up and tube flicker Supply voltage Body V ac 50/60Hz Polycarbonate body, Bakelite base Order Code Starter Holders Snap fit H=24.5, L=34, D=23 (inc. pins) 2 mtg holes Dia 31 ctrs Screw H=26, L=40, D= mtg holes Dia 31 ctrs Fluorescent tube starter holders available with snap-fit or screw fixing. Both have pushwire terminals. Order Multiple=10 Type Snap-fit Screw