V5011N Two-Way Threaded Globe Valve

Size: px
Start display at page:

Download "V5011N Two-Way Threaded Globe Valve"

Transcription

1 VN Two-Way Threaded Globe Valve FEATURES PRODUCT DATA Red brass body with NPT-threaded end connections. Low seat leakage rate (. percent of C v ). : rangeability per VDI/VDE 7. Spring-loaded, self-adjusting packing. Accurate positioning to ensure state of the art temperature control. Directly coupled electric and pneumatic actuators for easy mounting. Sizes range from / in. to in. Valve designs provide equal percentage flow characteristic for water and linear flow characteristic for steam. Stainless steel stem and metal-to-metal seats. Repack and rebuild kits for field servicing. APPLICATION The VN is a two-way threaded globe valve that controls steam, water, and glycol solutions (up to percent concentration) in heating or cooling HVAC applications. The valve is used in two-position and modulating control systems. The valve is not suitable for combustible gas service. Contents Application... Features... Specifications... Ordering Information... Installation... Checkout

2 VN TWO-WAY THREADED GLOBE VALVE SPECIFICATIONS IMPORTANT The specifications given in this publication do not include normal manufacturing tolerances. Therefore, an individual unit may not exactly match the listed specifications. Also, this product is tested and calibrated under closely controlled conditions and some minor differences in performance can be expected if those conditions are changed. Models: VN Valve: Two-way threaded globe valve for steam, water, or glycol. NPT-threaded pipe connections. Throttling plug provides equal percentage flow characteristic for water (VNxxx, VNxxx), linear flow characteristic for steam (VNxxx). NOTE: VNxxx and VNxxx are direct acting (stem down to close). VNxxx is reverse acting (stem up to close). Dimensions: See Fig.. Valve Sizes and Flow Capacities: See Table. Pipe Connections: Internal NPT-threaded connections. Seat: Stainless steel, replaceable (except VNxxx / in. to -/ in. which have an integral brass seat). ANSI Body Class: psi. Stem: Stainless steel. Plug: Brass on VNxxx and VNxxx for water; stainless steel on VNxxx for steam. Stroke: / in. ( mm). Approximate Leakage Rate:. percent C v. Pattern: -way, straight-through. Body Material: Red brass. Packing: Spring-loaded, carbon fiber reinforced PTFE V- rings. Rangeability: : per VDI/VDE 7. Pressure-Temperature Ratings: Water: 6 F to F, 7 psi ( bar). F to 7 F, psi (. bar). Maximum Water Differential Pressure: psid (. bar). Steam: psi (6.9 bar) at 7 F (VNxxx). Maximum Differential for Quiet Water Service: psid. Valve Flow Characteristics: Water: Equal percentage (VNxxx, VNxxx). Steam: Linear (VNxxx). See Fig.. Close-Off Pressure Ratings: See Fig., and Table. Valve Design Life:, full cycles at maximum rated temperature. Replacement Parts: See Fig. and Table. Motor and Linkage Selection: Electric Pneumatic ML6/ML6 MP9C ( and in.) ML7/ML7 MP9E ( and in.) ML79/ML69 Modutrol IV with Q Damper DCA with Q Table. Valve Size and Flow Capacities. Size (in.) Capacity (C v ) / / /.7 -/ ORDERING INFORMATION When purchasing replacement and modernization products from your TRADELINE wholesaler or distributor, refer to the TRADELINE Catalog or price sheets for complete ordering number. If you have additional questions, need further information, or would like to comment on our products or services, please write or phone:. Your local Honeywell Environmental and Combustion Controls Sales Office (check white pages of your phone directory).. Honeywell Customer Care 9 Douglas Drive North Golden Valley, Minnesota or International Sales and Service Offices in all principal cities of the world. Manufacturing in Belgium, Canada, China, Czech Republic, Germany, Hungary, Italy, Mexico, Netherlands, United Kingdom, and United States. 6-

3 VN TWO-WAY THREADED GLOBE VALVE Y, B Y Y PERCENTAGE STEM TRAVEL FLOW CHARACTERISTICS EQUAL PERCENTAGE LINEAR PERCENTAGE FLOW M97 A Fig.. Equal percentage and linear flow characteristics. VALVE SIZE (IN) / / -/ -/ A in. (mm) -/ () B in. (mm) -9/6 () -/6 -/6 (6) -/ -/6 (7) -/ () VALVE Y in. (mm) Y a in. (mm) VNXXX OR -/ (9) -/ () VNXXX STEM FULLY DOWN a Y WITH STEM EXTENSION FOR MP9C,E ( IN. ONLY) VNXXX -/6 (7) -/6 () STEM FULLY UP Fig.. VN body dimensions in in. (mm). M77A (-) (-7) (-9) () 9 (6) (69) (6) () 6 7 (7) () 9 () () () 6 7 (7) () 9 () () 6 7 (7) () 9 () () () VN / THROUGH IN., DIRECT ACTING, THREADED BODIES WITH IN. DIA. PNEUMATIC ACTUATOR (NORMALLY OPEN) (76) 6 () () (699) VNXXX VNXXX CLOSE OFF PRESSURE RATINGS PSI (kpa) USE - PSI SPRING FOR POSITIONER MODEL (MP9E). C V 6. C V 9. C V.7 Fig.. Close-off ratings at various control air pressures for VN Valves and MP9 Pneumatic Actuators. (7) C V.7 (96) 6 C V 7. () C V.7 TO.9 (79) (7) (9) M69 6-

4 VN TWO-WAY THREADED GLOBE VALVE (-) (-7) (-9) 7 () () 9 (6) (69) (6) () 6 7 (7) () 9 () () (7) () 6 7 (7) () 9 () () () 6 7 (7) () 9 () () () VN / THROUGH IN., DIRECT ACTING, THREADED BODIES WITH IN. DIA. PNEUMATIC ACTUATOR (NORMALLY OPEN) (76) 6 () C V 6. () (699) (7) (96) 6 () VNXXX VNXXX CLOSE OFF PRESSURE RATINGS PSI (kpa) USE - PSI SPRING FOR POSITIONER MODEL (MP9E). CV 9. C V.7 C V.7 TO.9 C V 7. C V.7 (79) (7) (9) M6 - (-7) -7 (-) () () - (-9) () 7 () 6 () () () (7) () () (7) () () () () (6)(69) (76) () (9) (96)()() 6 CLOSEOFF PRESSURE RATINGS PSI (kpa) USE - PSI SPRING FOR POSITIONER MODEL (MP9E). VN / THROUGH IN. DIRECT ACTING THREADED BODIES WITH 7-/ REVERSE ACTING PNEUMATIC ACTUATOR (NORMALLY CLOSED) C V 6. C V 9. C V.7 C V.7 TO.9 C V 7. C V.7 M6 SPRING RANGE PS (kpa) - - (-7) (-) () () 7 () 6 () () VN / THROUGH -/ IN. REVERSE ACTING THREADED BODIES WITH IN. DIRECT ACTING PNEUMATIC ACTUATOR (NORMALLY CLOSED) () () (7) () () (7) () () (7) CLOSEOFF PRESSURE RATINGS PSI (kpa) USE - PSI SPRING FOR POSITIONER MODEL (MP9E). Fig.. Close-off ratings at various control air pressures for VN Valves and MP9 Pneumatic Actuators. (continued) C V.7 () C V.7 () C V.7 TO.9 C V 7. 6 () 6 () 7 () M6 6-

5 VN TWO-WAY THREADED GLOBE VALVE (-) (-7) (-9) 7 () (7) () () 9 (6) (7) (7) () (9) () (9) () 6 7 () (9) () 6 7 () () VN / THROUGH -/ IN. REVERSE ACTING THREADED BODIES WITH 7 IN. REVERSE ACTING PNEUMATIC ACTUATOR (NORMALLY OPEN) (7) () () (7) () () (7) CLOSEOFF PRESSURE RATINGS PSI (kpa) () C V 7. () C V.7 TO.9 C V.7 6 () C V.7 6 () 7 () USE - PSI SPRING FOR POSITIONER MODEL (MP9E). M6 - - (-7) (-) () () 7 () 6 () () () () (7) VN / THROUGH -/ IN. REVERSE ACTING THREADED BODIES WITH IN. DIRECT ACTING PNEUMATIC ACTUATOR (NORMALLY CLOSED) () () (7) () Fig.. Close-off ratings at various control air pressures for VN Valves and MP9 Pneumatic Actuators. (continued) () (7) CLOSEOFF PRESSURE RATINGS PSI (kpa) USE - PSI SPRING FOR POSITIONER MODEL (MP9E). () () CV.7 TO.9 6 () CV 7. CV.7 CV.7 6 () 7 () M6 INSTALLATION When Installing This Product. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition.. Check the ratings given in the instructions and on the product to make sure the product is suitable for your application.. Installer must be a trained, experienced service technician.. After installation is complete, check out product operation as provided in these instructions. IMPORTANT. Do not lift the valve by holding the stem.. Do not mount the valve with the stem pointed lower than horizontal.. Mount the valve with the flow arrow pointed in the direction of flow through the valve.. Mount the valve between aligned pipes. Mounting the valve on pipes that are not aligned causes leakage at the valve-to-pipe connection.. Ensure complete engagement on pipe to valve body threads. 6. Hold the valve body with a clamp or pipe wrench on the hexagonal fitting nearest the pipe to prevent damage to the valve body while mounting on the pipe. Refer to Fig.. 7. Be sure to allow enough room for installation and service. Clearance for valve installation is dependent on actuator size and the valve pipe size. Location Select a location where the valve, linkage, and actuator are within the appropriate pressure and temperature ratings. Leave sufficient clearance above the valve to accommodate actuator installation and allow room for servicing the valve body. (Completely install the valve body in the pipe line before installing the actuator and linkage.) When selecting a location for the valve, consider actuator mounting restrictions. Modutrol IV Motor crankshafts must be mounted horizontally. 6-

6 VN TWO-WAY THREADED GLOBE VALVE Mounting The preferred valve mounting position is with the stem vertical. For steam applications, mount with the stem at a degree angle. Do not mount the valve with the stem more than 9 degrees from the vertical (pointing lower than horizontal). Scale and foreign material can collect, scoring the stem and causing packing leakage. Protect the stem from damage due to bending or scratching. IMPORTANT. Before installing linkage and actuator, make sure that the valve stem operates freely. Impaired stem operation can indicate that the body was twisted or the stem was bent. Either of these conditions can require valve replacement.. Align pipes squarely with valve at each end connection. NOTE:. If the pipes are forced into the valve, the body can become twisted and improper seating can result.. Apply pipe dope sparingly.. Be careful to prevent pipe debris, such as chips and scale, from entering the piping because this material can lodge in the seat and prevent proper closing. Threading on threaded bodies conform to NPT. Refer to the table in Fig. for valve pipe sizes and thread lengths. Fig. also shows two effective methods of holding the valve and pipe when attaching it. Refer to installation information furnished with the linkage and motor when installing these controls. Table. Close-off Ratings (psid) for VN Valves with Electric/Electronic Actuators. Mod IV Motor with Q Linkages ML6A, ML7A Valve Size (NPT) lb 6 lb lb lb lb 6 lb VNxxx and VNxxx Valves / a a a a a Pressure is limited by fluid temperature. See valve temperature/pressure ratings. ML6, ML7 ML6, ML7 / a a 96 9 a / a 6 7 a 6 -/ VNxxx Valves /, / a a a a a a 9 a -/ a a 7 -/ a 6 a a 7 6 ML79, ML67 PIPE SIZE (IN.) / / -/ -/ EFFECTIVE LENGTH OF THREADS IN IN. (MM) / 9/6 /6 /6 /6 / (.7) (.) (7.) (7.) (7.) (9.) USE PROPERLY REAMED AND CLEANED PIPE AND MODERATE AMOUNT OF DOPE (LEAVE TWO THREADS BARE). USE VISE GRIPS WITH THE HEX END NEXT TO THE PIPE (DO NOT TWIST OR SQUEEZE VALVE BODY). USE VISE TO HOLD PIPE SECURELY TO PREVENT TURNING. USE PARALLEL-JAW WRENCH TO GRIP VALVE HEX FLATS NEXT TO PIPE. M76A Fig.. Installing valves with threaded connections. 6-6

7 VN TWO-WAY THREADED GLOBE VALVE CHECKOUT Use the following procedure to check for proper valve operation:. Check valve body and connections for leaks. IMPORTANT Before installing linkage (if used) and actuator, make sure that the valve stem operates freely. Impaired stem operation can indicate that the body was twisted or the stem was bent. Either of these conditions can require valve replacement.. After installing linkage and actuator, check operation according to installation information furnished with these controls.. Operate system through one complete cycle to ensure valve controls properly.. Check valve at regular intervals for leakage around packing. NOTE: Packing is spring-loaded and should seldom require attention.. If leakage is discovered and inspection shows that the packing gland is screwed down tightly, then repack the valve. Table. Valve Rebuild and Repack Kits. Stem Diameter Stem Valve OS No. NPT Size (in.) Flow Capacity (C v ) (in.) Repack Kit Rebuild Kit Button VN /.7 / 976A 976A 96A a VN A VN. 97A VN.9 979A VN.7 97A VN7 / 7. 97A VN6.7 97A VN7 -/.7 97A VN -/ 9. / 977A 97A VN A VN6 /.7 / 976A 9A VN.6 9A VN. 9A VN.9 9A VN.7 96A VN / 7. 97A VN6.7 9A VN7 -/.7 99A VN9 -/ 9. / 977A 9A VN A VN /.9 / 976A 979A VN.7 976A VN / A VN.7 976A VN6 -/.7 976A a Each 96A contains stem buttons. NOTE: Seat removal tools are required to rebuild valves: 9- for / in. through -/ in. sizes. 9- for -/ in. through in. sizes. 7 6-

8 VN TWO-WAY THREADED GLOBE VALVE VN DIRECT ACTING TWO-WAY GLOBE VALVES VN REVERSE ACTING TWO-WAY GLOBE VALVES STEM BUTTON ASSEMBLY PACKING NUT STEM BUTTON ASSEMBLY PACKING NUT PACKING WAFERS PACKING WAFERS WASHER WASHER SPRING SPRING PACKING CARTRIDGE PACKING CARTRIDGE O RING O RING VALVE BODY VALVE BODY B A A AB B SEAT RING PLUG ASSEMBLY PLUG ASSEMBLY SEAT RING O RING O RING BOTTOM NUT LOWER SEAT PART INCLUDED IN REPACK KIT. 977A REPACK KIT (FOR VALVES WITH / INCH STEM) SHOWN. 976A REPACK KIT (FOR VALVES WITH / INCH STEM) CONTAINS THREE PACKING WAFERS INSTEAD OF FOUR. BOTTOM NUT INCLUDED IN REBUILD KIT. INCLUDED ONLY WITH VN REVERSE ACTING TWO-WAY GLOBE VALVES. Fig.. VN replacement parts. M7A By using this Honeywell literature, you agree that Honeywell will have no liability for any damages arising out of your use or modification to, the literature. You will defend and indemnify Honeywell, its affiliates and subsidiaries, from and against any liability, cost, or damages, including attorneys fees, arising out of, or resulting from, any modification to the literature by you. Automation and Control Solutions Honeywell International Inc. 9 Douglas Drive North Golden Valley, MN customer.honeywell.com U.S. Registered Trademark 6 Honeywell International Inc. 6- M.S. Rev. -6 Printed in United States

V5011N Two-Way Threaded Globe Valve

V5011N Two-Way Threaded Globe Valve VN Two-Way Threaded Globe Valve FEATURES PRODUCT DATA Red brass body with NPT-threaded end connections. Low seat leakage rate (. percent C v ). : rangeability per VDI/VDE 7. Spring-loaded, self-adjusting

More information

The ES /118 Explosion-Proof Housings

The ES /118 Explosion-Proof Housings Explosion-Proof Housings The ES-650-117/118 Explosion-Proof Housings are used to enclose Modutrol Motors used in hazardous locations. NEMA 7 and NEMA 9 enclosures. Housing meets NEC requirements for Class

More information

V5013N Three-Way Threaded Globe Valve

V5013N Three-Way Threaded Globe Valve VN Three-Way Threaded Globe Valve FETRES PRODCT DT Red brass body with NPT-threaded connections. Stainless steel stem and brass plug. ow seat leakage rate (. percent of C v ). Spring-loaded, self-adjusting

More information

Q5024A,B Globe Valve Linkages FOR DIRECT COUPLED ACTUATORS

Q5024A,B Globe Valve Linkages FOR DIRECT COUPLED ACTUATORS Q5024A,B Globe Linkages FOR DIRECT COUPLED ACTUATORS PRODUCT DATA Heavy-duty steel rack pinion construction aluminum die-cast housing. Maintenance-free construction. Flexible actuator mounting orientation.

More information

ML6420, ML7420 Non-Spring Return Electric Linear Valve Actuators

ML6420, ML7420 Non-Spring Return Electric Linear Valve Actuators ML640, ML740 Non-Spring Return Electric Linear Valve Actuators EATURES Quick and easy installation. No separate linkage required. Conduit connector is standard. No adjustments required. Low power consumption.

More information

VGF Flanged Globe Valves

VGF Flanged Globe Valves VGF Flanged Globe Valves PRODUCT DATA VGF2 VGF3 APPLICATION VGF Flanged Globe Valves are used for 2-position or modulating control of steam, hot water, or chilled water in closed loop HVAC systems. They

More information

ML6420, ML7420 Non-Spring Return Electric Linear Valve Actuators

ML6420, ML7420 Non-Spring Return Electric Linear Valve Actuators ML640, ML740 Non-Spring Return Electric Linear Valve Actuators EATURES Quick and easy installation. No separate linkage required. Conduit connector is standard. No adjustments required. Low power consumption.

More information

MS4104, MS4109, MS4604, MS4609, MS8104, MS8109 Fast-Acting, Two-Position Actuators

MS4104, MS4109, MS4604, MS4609, MS8104, MS8109 Fast-Acting, Two-Position Actuators MS4104, MS4109, MS4604, MS4609, MS8104, MS8109 Fast-Acting, Two-Position Actuators FOR FIRE/SMOKE CONTROL APPLICATIONS FEATURES PRODUCT DATA APPLICATION The MS4104, MS4109, MS4604, MS4609, MS8104 and MS8109

More information

V5013N Three-Way Threaded Globe Valve

V5013N Three-Way Threaded Globe Valve VN Three-Way Threaded Globe Valve FETRES PRODCT DT Red brass body with NPT-threaded connections. Stainless steel stem and brass plug. ow seat leakage rate (. percent C v ). Spring-loaded, self-adjusting

More information

V5197A Firing Rate Gas Valve

V5197A Firing Rate Gas Valve V5197A Firing Rate Gas Valve FEATURES PRODUCT DATA APPLICATION The V5197A is a firing rate valve used to provide variable flow control of air, natural gas, liquefied petroleum (LP), and manufactured gases.

More information

Q5020A-D Globe Valve Linkages FOR DIRECT COUPLED ACTUATORS

Q5020A-D Globe Valve Linkages FOR DIRECT COUPLED ACTUATORS Q5020A-D Globe Valve Linkages FOR DIRECT COUPLED ACTUATORS FEATURES PRODUCT DATA Used with 2- and 3- globe valves in modulating or two-position service. Used with 25, 50, and 142 lb-in. spring return and

More information

ML6425, ML7425 Spring Return Electric Linear Valve Actuators

ML6425, ML7425 Spring Return Electric Linear Valve Actuators ML645, ML745 Spring Return Electric Linear Valve Actuators PRODUCT DATA EATURES APPLICATION The ML645 Spring Return Electric Linear Valve Actuators are floating control actuators used with controllers

More information

V51E Butterfly Valve. The valve mechanism is equipped with strain release springs.

V51E Butterfly Valve. The valve mechanism is equipped with strain release springs. Butterfly Valve The V51E Butterfly Valve is a firing rate valve used to provide variable flow control of natural, liquefied petroleum (LP), and manufactured gases. It is also applicable to controlling

More information

L404F,T,V PressureTrol Controllers

L404F,T,V PressureTrol Controllers L404F,T,V PressureTrol Controllers PRODUCT DATA FEATURES Models available in a series of control ranges, and pressure scales in kpa and psi. All models automatically reset and have an adjustable differential.

More information

Immersion Wells and Compression Fittings FOR TEMPERATURE CONTROLLERS

Immersion Wells and Compression Fittings FOR TEMPERATURE CONTROLLERS Immersion Wells and Compression Fittings FOR TEMPERATURE CONTROLLERS FEATURES PRODUCT DATA 107324A ELEMENT HOLDER APPLICATION 121371B IMMERSION WELL 112632AA IMMERSION WELL 104484A COMPRESSION FITTING

More information

V5013B,C,F Three-Way Mixing and Diverting Valves

V5013B,C,F Three-Way Mixing and Diverting Valves V50,C,F Three-Way Mixing and Diverting Valves FETURES PRODUCT DT Mixing or diverting models. ronze body with threaded connections or cast iron body with flanged-end connections. Stainless steel stem and

More information

Series 71, 72, and 76 Modutrol IV Motors

Series 71, 72, and 76 Modutrol IV Motors Series 7, 7, and 76 Modutrol IV Motors PRODUCT DATA FEATURES APPLICATION The Series 7, 7 and 76 Modutrol IV Motors are spring return and nonspring return motors used to control dampers and valves. The

More information

M436A/M836A,B Damper Motors

M436A/M836A,B Damper Motors M436A/M836A,B Damper Motors FEATURES INSTALLATION INSTRUCTIONS APPLICATION M436A/M836A,B Damper Motors are spring return (SR) motors used for residential and light commercial applications in Series 40

More information

C7046A,B,C,D Air Temperature Sensors

C7046A,B,C,D Air Temperature Sensors C7046A,B,C,D Air Temperature Sensors FEATURES PRODUCT DATA APPLICATION The C7046 series of Air Temperature Sensors function as primary and/or secondary sensors in electronic control systems. C7046A,C Sensors

More information

ML7421A,B Electric Linear Valve Actuator

ML7421A,B Electric Linear Valve Actuator ML7421A,B Electric Linear Valve Actuator FEATURES PRODUCT DATA Quick and easy installation. No separate linkage required. 3/4 in. (20 mm) stroke on ML7421A; 1-1/2 in. (38 mm) stroke on ML7421B. No adjustments

More information

V5049A FLANGED LINEAR VALVE PN25/40

V5049A FLANGED LINEAR VALVE PN25/40 V549A FLANGED LINEAR VALVE PN25/4 FEATURES SPECIFICATION DATA Cast iron or cast steel body with flanged end connections Low seat leakage rate Metal-to-metal seating for long life span Self-adjusting packing

More information

Series 41 and 81 Modutrol IV Motors

Series 41 and 81 Modutrol IV Motors Series 4 and 8 Modutrol IV Motors PRODUCT DATA FEATURES APPLICATION The Series 4 and Series 8 Modutrol IV Motors are 2-position (line- and low- voltage control, respectively) spring-return motors. They

More information

V5050A,B FLANGED LINEAR VALVE PN16 AND PN25/40

V5050A,B FLANGED LINEAR VALVE PN16 AND PN25/40 V55A,B FLANGED LINEAR VALVE PN16 AND PN25/4 GENERAL These three-port mixing s are used for modulating control of hot/chilled water or steam in heating, ventilation, and air conditioning systems and can

More information

Thermal Expansion Absorber For Potable Water TX SERIES TANKS

Thermal Expansion Absorber For Potable Water TX SERIES TANKS Thermal Expansion Absorber For Potable Water TX SERIES TANKS PRODUCT DATA SPECIFICATIONS Maximum Pressure: 150 psi (1034 kpa). Maximum Temperature: 200 F (93 C). Standard Factory Air Charge: 40 psi (276

More information

AT120A-E; AT140A-E; AT150A,B,D-F; AT160B; AT175A-D,F Transformers

AT120A-E; AT140A-E; AT150A,B,D-F; AT160B; AT175A-D,F Transformers AT0A-E; AT0A-E; AT50A,B,D-F; AT60B; AT75A-D,F Transformers FEATURES PRODUCT DATA AT0 is rated at 0 VA. AT0 is rated at 0 VA. AT50 is rated at 50 VA. AT60 is rated at 60 VA. AT75 is rated at 75 VA. All

More information

D690 Round Damper LOW-LEAKAGE, SINGLE-BLADE FEATURES APPLICATION PRODUCT DATA. Contents

D690 Round Damper LOW-LEAKAGE, SINGLE-BLADE FEATURES APPLICATION PRODUCT DATA. Contents D690 Round Damper LOW-LEAKAGE, SINGLE-BLADE FEATURES PRODUCT DATA Neoprene and silicone seal for tight closing and low leakage. Oilite bearings for long life. 90-degree damper travel for a variety of applications.

More information

V4043 and V4044 Motorized Valves

V4043 and V4044 Motorized Valves V03 and V0 Motorized Valves INSTALLATION INSTRUCTIONS FEATURES V0 These valves consist of an actuator motor and valve assembly for controlling the flow of hot or cold water. The V03 provides 2-position,

More information

VB-9213 Series. Application. Features. Applicable Literature

VB-9213 Series. Application. Features. Applicable Literature VB-9213 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Stem Down to Close Two-Way Valves General Instructions pplication VB-9213 series single seat, stem down to close, twoway valves control

More information

Q345A, Q3451, Q3481, Q348A, Q348B, Q362A, Q373A, Q381A and Q3452 Intermittent Pilot Burner/Igniter-Sensors

Q345A, Q3451, Q3481, Q348A, Q348B, Q362A, Q373A, Q381A and Q3452 Intermittent Pilot Burner/Igniter-Sensors QA, Q, Q8, Q8A, Q8B, Q6A, QA, Q8A and Q Intermittent Pilot Burner/Igniter-Sensors FEATURES PRODUCT DATA QA Q,Q8 Q8A,B Q6A QA QA, Q8A, Q8B and QA Intermittent Pilot Burner/Igniter-Sensors are compatible

More information

35 and 70 lb-in. Non-Spring Return Direct Coupled Actuators ML6161, ML7161, ML6174, ML7174

35 and 70 lb-in. Non-Spring Return Direct Coupled Actuators ML6161, ML7161, ML6174, ML7174 35 and 70 lb-in. Non-Spring Return Direct Coupled Actuators ML66, ML76, ML674, ML774 PRODUCT DATA FEATURES Selectable 45,, or 90 stroke in both clockwise (cw) or counterclockwise (ccw) directions. 0 to

More information

FEATURES APPLICATION PRODUCT DATA

FEATURES APPLICATION PRODUCT DATA M640,M740F,M6435,M7435F ctuators V5852, V5853, V5862, V5863 Valves 40.5 L (80N) NON-SPRING ND SPRING RETURN CTUTORS ND /2 INCH, 3/4 INCH CRTRIDGE GLOE VLVES FETURES PRODUCT DT Small size allows installation

More information

V5055A-F Industrial Gas Valves

V5055A-F Industrial Gas Valves V5055A-F Industrial Gas Valves FEATURES PRODUCT DATA APPLICATION The V5055 Gas Valves are used with the V4055, V406, and V9055 Fluid Power Actuators to control gas flow to commercial and industrial burners.

More information

Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250

Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250 Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250 Document No. 155-184P25 VF 599-3 Description The Flowrite 599 Series two-way valves are designed to work with either a pneumatic

More information

V5050A,B FLANGED LINEAR VALVE PN16 AND PN25/40

V5050A,B FLANGED LINEAR VALVE PN16 AND PN25/40 V55A,B FLANGED LINEAR VALVE PN16 AND PN25/4 GENERAL These threeport mixing valves are used for modulating control of hot/chilled water or steam in heating, ventilation, and air conditioning systems and

More information

VB-9313 Series. Application. Features. Applicable Literature

VB-9313 Series. Application. Features. Applicable Literature V-9313 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Three-Way Mixing s General Instructions pplication V-9313 series three-way mixing valves control hot or chilled water in heating or

More information

Immersion Wells and Compression Fittings FOR TEMPERATURE CONTROLLERS

Immersion Wells and Compression Fittings FOR TEMPERATURE CONTROLLERS Immersion Wells and Compression Fittings FOR TEMPERATURE CONTROLLERS FEATURES PRODUCT DATA 107324A ELEMENT HOLDER APPLICATION 121371B IMMERSION WELL 112632AA IMMERSION WELL 104484A COMPRESSION FITTING

More information

VB-9323 Series. Application. Features. Applicable Literature. 2-1/2" to 6" 125 Lb. Flanged Three-Way Diverting Valves General Instructions

VB-9323 Series. Application. Features. Applicable Literature. 2-1/2 to 6 125 Lb. Flanged Three-Way Diverting Valves General Instructions TAC 1354 Clifford Avenue P. O. Box 2940 Loves Park, IL 61132-2940 www.tac.com VB-9323 Series 2-1/2" to 6" 125 Lb. Flanged Three-Way Diverting Valves General Instructions Application VB-9323 series three-way

More information

Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250

Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250 Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250 Technical Instructions Document No. 155-184P25 VF 599-3 Description The Flowrite 599 Series two-way valves are designed to work

More information

Flowrite 599 Series Two-Way Valves 1/2 to 2-inch Bronze Body

Flowrite 599 Series Two-Way Valves 1/2 to 2-inch Bronze Body Flowrite 599 Series Two-Way Valves 1/2 to 2-inch Bronze Body Document No. 155-184P25 VF 599-3 Description The Flowrite 599 Series two-way valves are designed to work with either a pneumatic or electronic

More information

C7170A,B Encapsulated Temperature Sensor

C7170A,B Encapsulated Temperature Sensor C7170A,B Encapsulated Temperature Sensor The C7170A,B Temperature Sensors are for use with electronic controllers where linear PTC sensors are required (W7100, W7600, W7620, or Excel 500, for example),

More information

V5011A,B,F,G,H,J Single-Seated Valves

V5011A,B,F,G,H,J Single-Seated Valves V50,,F,G,H, Single-Seated Valves FETURES Sizes range from one-half inch to six inches. vailable with threaded or flanged pipe connections. Direct- or reverse-acting models. Valve designs provide equal

More information

Flowrite 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body

Flowrite 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body Flowrite 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body Document No. 155-185P25 VF 599-4 Description The Flowrite VF 599 Series ANSI Class 250 three-way valves are designed to work with either a

More information

Flowrite 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body

Flowrite 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body Flowrite 599 Series Three-Way s 1/2 to 2-inch Bronze Body Technical Instructions Document No. 155-185P25 VF 599-4 Description The Flowrite VF 599 Series ANSI Class 250 three-way valves are designed to

More information

ervi Description AppGcationr

ervi Description AppGcationr ervi Description The VP5268 ThreeWay High Pressure Water Valve is a threeway mixing valve with am integral pneumatic actuator used in fan coil units having hot and/or chilled water coils. Three design

More information

Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body

Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either a pneumatic

More information

Flowrite VF 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body

Flowrite VF 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body PRODUCT NO. MODEL LANDIS & STAEFA ASSEMBLED IN U.S.A. Flowrite VF 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body Document No. 155-185P25 VF 599-4 Cv VF186R1 Description The Flowrite VF 599 Series

More information

VB-9313 Series. Application. Features. Applicable Literature

VB-9313 Series. Application. Features. Applicable Literature V-9313 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Three-Way Mixing s General Instructions pplication V-9313 series three-way mixing valves control hot or chilled water in heating or

More information

BCS Modutrol Motor M7484A

BCS Modutrol Motor M7484A BCS 7700 Modutrol Motor M7484A The M7484A is a low voltage, reversing proportional modutrol motor used to drive a fuel valve and combustion air damper as commanded by the BCS 7700. Electronic, vibration

More information

Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body

Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 VF114R1 VF115R1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either

More information

VBF2, VBF3 Control Ball Valves With Flanged Connections

VBF2, VBF3 Control Ball Valves With Flanged Connections BF, BF Control Ball alves With Flanged Connections FETURES PRODUCT DT BF PPLICTION BF The BF Two-Way and the BF Three-Way Ball alve ssemblies, with and without actuators, control hot and chilled water

More information

V January 2016 SINGLE SEATED V5011 SERIES. Previously manufactured by Dezurik and Honeywell

V January 2016 SINGLE SEATED V5011 SERIES. Previously manufactured by Dezurik and Honeywell V5011. January 2016 SINGLE SEATED V5011 SERIES Previously manufactured by Dezurik and Honeywell Description: 2 ½ to 6 class 5 with cast iron body, bronze trim and composite seat, ideally suited for low

More information

Q345A, Q3451, Q3481, Q348A, Q348B, Q362A, Q373A, Q381A and Q3452 Intermittent Pilot Burner/Igniter-Sensors PRODUCT DATA

Q345A, Q3451, Q3481, Q348A, Q348B, Q362A, Q373A, Q381A and Q3452 Intermittent Pilot Burner/Igniter-Sensors PRODUCT DATA QA, Q, Q8, Q8A, Q8B, Q6A, QA, Q8A and Q Intermittent Pilot Burner/Igniter-Sensors PRODUCT DATA FEATURES QA, Q8A, Q8B and QA Intermittent Pilot Burner/Igniter-Sensors are compatible with all Honeywell intermittent

More information

Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body

Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either a pneumatic

More information

V9055A,D Modulating Fluid Power Gas Valve Actuator

V9055A,D Modulating Fluid Power Gas Valve Actuator V9055A,D Modulating Fluid Power Gas Valve Actuator PRODUCT DATA APPLICATION The V9055 Gas Valve Actuator in combination with a V5055, VE5000 a or V5097 Gas Valve provides modulating control of the gas

More information

Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve

Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Application Control valve for feedwater and steam applications in power plant engineering and the petrochemical industry Nominal

More information

MS4120F, MS4620F, MS8120F, S2024-F, S20230-F Fast-Acting, Two-Position Actuators

MS4120F, MS4620F, MS8120F, S2024-F, S20230-F Fast-Acting, Two-Position Actuators MS4120F, MS4620F, MS8120F, S2024-F, S20230-F Fast-Acting, Two-Position Actuators FEATURES PRODUCT DATA 175 lb-in. (20 N m) minimum driving torque at 350 F (176 C). Reversible mounting facilitates use in

More information

ComfortPoint Programmable Lon, VAV/Unitary Controllers

ComfortPoint Programmable Lon, VAV/Unitary Controllers ComfortPoint Programmable Lon, VAV/Unitary Controllers Controller Model Programmable Type Universal Inputs (UI) Table 1. Controller configurations. Digital Inputs (DI) PRODUCT DESCRIPTION INSTALLATION

More information

3-way 1/2-2 Globe Valves

3-way 1/2-2 Globe Valves Datasheet Overview Designed to work with either an electronic actuator with a 3/4-inch (20 mm) stroke, the three-way globe valves are available in ANSI Class 250 for normally closed or normally open action.

More information

VE VVG Series Electronic Two-way Valves Normally Closed

VE VVG Series Electronic Two-way Valves Normally Closed VE VVG Series Electronic Two-way s Normally Closed Document No. 155-112P25 VE VVG-1 Description The VE VVG electronic two-way valves control the flow of water or glycol solutions. The electronic actuator

More information

VG7000 Series Bronze Control Valves

VG7000 Series Bronze Control Valves VG7000 Series Bronze Control Valves Installation Instructions VG7000 Part No. 14-1078-6, Rev. E Issued June 16, 2008 Supersedes August 12, 2002 Applications VG7000 Series Bronze Control Valves are primarily

More information

VC2, VC4, VC60, VC8 ON-OFF ACTUATOR FOR VC SERIES BALANCED HYDRONIC VALVES SPECIFICATIONS INSTALLATION INSTRUCTIONS

VC2, VC4, VC60, VC8 ON-OFF ACTUATOR FOR VC SERIES BALANCED HYDRONIC VALVES SPECIFICATIONS INSTALLATION INSTRUCTIONS ON-OFF ACTUATOR FOR VC SERIES BALANCED HYDRONIC VALVES INSTALLATION INSTRUCTIONS Power consumption: 6 Watts Max. at nominal Voltage (during valve position change). Use 24 V Class 2 transformer and provide

More information

Q7130A, Q7230A, Q7330A Modutrol IV Interface Modules

Q7130A, Q7230A, Q7330A Modutrol IV Interface Modules Q70A, Q70A, Q70A Modutrol IV Interface Modules EATURES INSTALLATION INSTRUCTIONS Q70A APPLICATION Q70A Q70A The Q70, Q70, and Q70 Modutrol IV Interface Modules are used with Series 90 Modutrol IV Motors

More information

High Pressure 2-way 2 1/2-6 Globe Valves

High Pressure 2-way 2 1/2-6 Globe Valves Overview Datasheet High Pressure 2-way 2 1/2-6 Globe Valves Designed to work with either an electronic actuator with a 3/4-inch (20 mm) or 1-1/2-inch (40 mm) stroke, the two-way globe valves are available

More information

599 Series Zone Valve Bodies:

599 Series Zone Valve Bodies: 599 Series Zone Bodies: Two-Way and Three-Way VE VV-1 Description Features The 599 Series two-way and three-way Zone s with a 1/10-inch (2.5 mm) stroke. Direct-coupled, universal bonnet Application Ordering

More information

Powers Controls Powermite Two-Way Flared Valves Normally Open/Normally Closed

Powers Controls Powermite Two-Way Flared Valves Normally Open/Normally Closed Powers Controls Powermite Two-Way Flared s Normally Open/Normally Closed VP 656-5 Description The VP 656 normally open and normally closed flared valves are pneumatically operated valves designed to control

More information

T 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve

T 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve T 8053 EN Type 3252-1 and Type 3252-7 Pneumatic Control Valves Type 3252 High-pressure Valve Application Control valve especially designed for controlling low flow rates in process engineering Valve sizes

More information

Series 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve

Series 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design

More information

Flowrite 599 Series High Pressure Close-Off 2-Way Valves, 2-1/2 to 6-Inch, Flanged Iron Body, ANSI Classes 125 & 250

Flowrite 599 Series High Pressure Close-Off 2-Way Valves, 2-1/2 to 6-Inch, Flanged Iron Body, ANSI Classes 125 & 250 Document Number 155-758 Flowrite 599 Series High Pressure Close-Off 2-Way s, 2-1/2 to 6-Inch, Flanged Iron Body, ANSI Classes 125 & 250 Description Features Application The Flowrite 599 Series High Pressure

More information

VRN Dynamic Pressure-Regulating Control Valves and Actuators

VRN Dynamic Pressure-Regulating Control Valves and Actuators VRN Dynamic Pressure-Regulating Control Valves and Actuators FEATURES PRODUCT DATA APPLICATION The VRN2 two-way dynamic pressure-regulating control valves maintain constant flow of hot or chilled water

More information

Powermite 599 Series MT Series Terminal Unit Two-way Valves

Powermite 599 Series MT Series Terminal Unit Two-way Valves Powermite 599 Series MT Series Terminal Unit Two-way Valves Document No. 155-196P25 VF 599-5 April 9, 29 Description The Powermite 599 Series ANSI Class 25 MT Series two-way valve bodies work with any

More information

Powers Controls Powertop Two-Way Valves Normally Open

Powers Controls Powertop Two-Way Valves Normally Open Powers Controls Powertop Two-Way s Normally Open VP 658-5 Description The VP 658 normally open valves are pneumatically operated valves designed to control the flow of both water and steam. Features Stainless

More information

AV-430. Application. Features. Applicable Literature. Valve Linkage for Pneumatic Actuators General Instructions

AV-430. Application. Features. Applicable Literature. Valve Linkage for Pneumatic Actuators General Instructions AV-430 Valve Linkage for Pneumatic s General Instructions Application The AV-430 valve linkage is used to field assemble MK-66X1, MK-68X1, and MK-6911 actuators, as well as the obsolete MK-47X1 actuators,

More information

Flowrite 599 Series. Technical Bulletin. 1/2 to 2-Inch Valve (2-Way & 3-Way) and Actuator Assembly Selection. Document No.

Flowrite 599 Series. Technical Bulletin. 1/2 to 2-Inch Valve (2-Way & 3-Way) and Actuator Assembly Selection. Document No. rite 599 Series 1/2 to 2-Inch (2-Way & 3-Way) and Actuator Assembly Selection Bulletin TB 255 How to Use the Selection Graphs How To Use The Tables This Bulletin will aid in selecting a 1/2-inch to 2-inch

More information

Flare Valves 1/2 inch 2-Way and 3-Way

Flare Valves 1/2 inch 2-Way and 3-Way Valve and Actuator Manual 977 Valve Product Information Section Product Bulletin VTF Series Issue Date 0596 Flare Valves 1/2 inch 2-Way and 3-Way The 1/2 inch flared valve line is designed to accurately

More information

V4043/V4044 Motorized Valves

V4043/V4044 Motorized Valves V4043/V4044 Motorized Valves PRODUCT SPECIFICATION SHEET FEATURES V4043 provides 2-position, straight-through control of water. V4044 provides 2-position diverting control of water. Compact construction

More information

Features Globe Valve 2-Way & 3-Way Assembly Features:

Features Globe Valve 2-Way & 3-Way Assembly Features: Rev: 10/22/13 Features Globe Valve 2-Way & 3-Way Assembly Features: DG Series Automated Applications for Building Automation, Temperature Controls, HVAC Two-Way and Three-Way Assemblies Chilled Water Hot

More information

VB-8000 Series VB-9313 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents. Valve and Actuator Selection Procedure

VB-8000 Series VB-9313 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents. Valve and Actuator Selection Procedure Selection Guide VB-8000 Series VB-9313 Series Schneider ElectricVB-8000 Series and VB-9000 Series 2-1/2 to 6 Globe Valves with Schneider Electric NSR Forta M800A and M1500A Actuators Applications Schneider

More information

Powermite 599 Series MT Series Terminal Unit Three-way Valves

Powermite 599 Series MT Series Terminal Unit Three-way Valves Technical Instructions Document No. 155-197P25 VF 599-6 May 2, 28 Powermite 599 Series MT Series Terminal Unit Three-way Valves VF216R1 Description The Powermite Series ANSI Class 2 MT Series three-way

More information

Type and Type Pneumatic Control Valves Type 3510 Micro-flow Valve

Type and Type Pneumatic Control Valves Type 3510 Micro-flow Valve Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research

More information

Series 240 Pneumatic Control Valve Type DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA

Series 240 Pneumatic Control Valve Type DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA Series 240 Pneumatic Control Valve Type 3241-1 DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA ANSI version Application Control valve for PSA plants (Pressure Swing Adsorption) (German: DWA) NPS ½ to 6 Pressure

More information

VBN Threaded Control Ball Valves and Actuators

VBN Threaded Control Ball Valves and Actuators Global Field Devices VBN Threaded Control Ball Valves and Actuators PRODUCT DATA APPLICATION The VBN -Way Control Ball Valves and VBN -Way Control Ball Valves control hot and chilled water with glycol

More information

Distributed By: M&M Control Service, Inc

Distributed By: M&M Control Service, Inc Control Valves DESIGN & OPERATION Description A control valve is a device capable of modulating flow at varying degrees between minimal flow and full capacity in response to a signal from an external control

More information

Series 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve

Series 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design

More information

VG2000 Series Electric Cast Iron Flanged Globe Valves

VG2000 Series Electric Cast Iron Flanged Globe Valves VG2000 Series Electric Cast Iron Flanged Globe Valves Code No. LIT-1900097 Issued January 2, 2014 Description VG2000 Series Electric Cast Iron Flanged Globe Valves are designed primarily to regulate the

More information

MK Series - High Performance Butterfly Valves Operation and Maintenance Instructions

MK Series - High Performance Butterfly Valves Operation and Maintenance Instructions COMMERCIAL Bray Controls Commercial Division 13788 West Road, Suite 200A Houston, Texas 77041 BCDSales@Bray.com Phone: 1-888-412-2729 Fax: 1-888-412-2720 www.braycommercialdivision.com MK Series - High

More information

Python Series Control Valves

Python Series Control Valves s When accurate control is desired from your steam or water applications the Armstrong Python 1100 Series Control Valve will squeeze every bit of performance out of your system and deliver precise control.

More information

VT Series Terminal Unit Valves 1/2 inch, 2-Way and 3-Way ANSI Class 250 Body Rating

VT Series Terminal Unit Valves 1/2 inch, 2-Way and 3-Way ANSI Class 250 Body Rating FANs 977, 125, 1628. Product Bulletin VT Issue Date 0596 VT Series Terminal Unit Valves 1/2 inch, 2-Way and -Way ANSI Class 250 Body Rating The VT Series Terminal Unit Valves are designed to accurately

More information

Bray/McCannalok High Performance Butterfly Valve Operation and Maintenance Manual

Bray/McCannalok High Performance Butterfly Valve Operation and Maintenance Manual Bray/McCannalok High Performance Butterfly Valve Operation and Maintenance Manual Table of Contents Definition of Terms 1 Introduction 1 Installation 1 Maintenance 2 Stem Seal Replacement 4 Seat Replacement

More information

Electronic Globe Valve Guide Specifications

Electronic Globe Valve Guide Specifications Electronic Globe Valve Guide Specifications Two and Three-Way Screwed Valves Valves 1/2" through 2" shall be bronze body, NPT screw type, and shall be rated for NSI Class 250 working pressure. The operating

More information

VG7000 Series Bronze Control Valves

VG7000 Series Bronze Control Valves VG7000 Series Bronze Control Valves Product Bulletin VG7000 Series Code No. LIT-977140 Issued June 16, 2008 Supersedes March 2001 VG7000 Series Bronze Control Valves are designed primarily to regulate

More information

Data Sheet T EN

Data Sheet T EN Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN

More information

Mounting and Operating Instructions EB 5868/5869 EN

Mounting and Operating Instructions EB 5868/5869 EN Electric Control Valves Types 3213/5857, 3213/5824, Types 3214/5824, 3214/3374, 3214/3274 with safety function: Types 3213/5825, 3214/5825, 3214/3374, 3214/3274 Pneumatic Control Valves Types 3213/2780-1,

More information

Electronic Ball Valve Guide Specifications

Electronic Ball Valve Guide Specifications Electronic Ball Valve Guide Specifications Control Valve Assemblies Ball Valve Bodies All ball valves used for modulating or floating (tri-state) control must be furnished with a stainless steel ball &

More information

McCannalok HIGH PERFORMANCE BUTTERFLY VALVE OPERATION AND MAINTENANCE MANUAL. The High Performance Company

McCannalok HIGH PERFORMANCE BUTTERFLY VALVE OPERATION AND MAINTENANCE MANUAL. The High Performance Company McCannalok HIGH PERFORMANCE BUTTERFLY VALVE OPERATION AND MAINTENANCE MANUAL The High Performance Company Table of Contents Safety Information - Definition of Terms... 1 Introduction... 1 Installation...

More information

R182J, R482J, R845A, R847A, R882J, RA89A, RA832A Switching Relays

R182J, R482J, R845A, R847A, R882J, RA89A, RA832A Switching Relays RJ, RJ, RA, RA, RJ, RA9A, RAA Switching Relays hese relays provide intermediate or heavy duty service in a wide variety of switching configurations. Relays with V control coils: RlJ, RJ, RA, RA9A, RAA,

More information

COMMERCIAL. Product PRofile

COMMERCIAL. Product PRofile Product PRofile 2 PRODUCT OVERVIEW INtroduction At Bray International, Inc., our business is helping our customers with their flow control requirements. Our modular product line of butterfly, ball and

More information

SERIES VC. 1/2 to 1-1/2 Carbon Steel V-Port Control Ball Valve

SERIES VC. 1/2 to 1-1/2 Carbon Steel V-Port Control Ball Valve SERIES VC 1/2 to 1-1/2 Carbon Steel V-Port Control all Valve Publication SVC000-101 Issue 1/18 Rev. C General Information Modified V-Port cast directly into the ball High Rangeability: 300:1 Turn down

More information

VG7000 Series Bronze Control Valves

VG7000 Series Bronze Control Valves FANs 977, 125, 1628.3 Product/Technical Bulletin VG7000 Issue Date 0301 VG7000 Series Bronze Control Valves VG7000 Series Bronze Control Valves are designed primarily to regulate the flow of water and

More information

VG7000 Female Threaded Cast Bronze Valve Series with Electric Actuators

VG7000 Female Threaded Cast Bronze Valve Series with Electric Actuators VG7000 Female Threaded Cast Bronze Valve Series Electric Actuators Product Bulletin PB_VG7000 Electric Issue Date 02 2009 The VG7000 Series electrically operated cast bronze valves female threaded fittings

More information

2-way and 3-way globe valves

2-way and 3-way globe valves 2-way and 3-way globe valves Table of Contents Background Project planning 2 Flow characteristics 2 Principles of flow control 3 ydraulic circuits 4 Design and dimensioning Cavitation diagrams 5 Design

More information