LED Lighting for Convenience Stores, Canopies & Retail Buildings

Size: px

Start display at page:

Download "LED Lighting for Convenience Stores, Canopies & Retail Buildings"

Hope Kennedy
6 years ago
Views:

Light (LCN3) Designed specifically for fuel stations, the Enduralux LED Canopy Light evenly illuminates fuel dispensers and reduces spill

1 LED Lighting for Convenience Stores, Canopies & Retail Buildings High performance LED Area Lights offer superior visibility and energy savings Full cut-off, wall mounted exterior lighting solutions engineered around energy-efficient, high output LED Enduralux LED Canopy Light (LCN3) Designed specifically for fuel stations, the Enduralux LED Canopy Light evenly illuminates fuel dispensers and reduces spill light, all while achieving the ultimate goal of reduced energy and maintenance costs Leotek Electronics USA, LLC. All Rights Reserved.

2 Enduralux LED Canopy Light LCN3 Luminaire Data Weight 15 lbs [6.8 kg] Housing Constructed with die formed aluminum housing and tempered glass Finish Housing receives a fade and abrasion resistant, polyester powder threaded aluminum stem with two electrical entries for thru-way access above. States and Canada. Light source housing is IP67 rated. Fixture main- intensity at 100,000 hours of life. LEDs are tested in accordance with of 5000K (standard) and 70 minimum CRI. LEDs are 100% mercury and lead free. Performance Data Photometry Warranty 10-year limited warranty is standard on all luminaires and components. No. of LEDs & Type 60T 80T Drive Current (ma) (W) Delivered Lumens (Lm) Type 5S (Lm/W) B3 U0 G B3 U0 G B3 U0 G B3 U0 G B4 U0 G1 120T B4 U0 G Leotek Electronics USA, LLC. All Rights Reserved. BHP Energy México S. de R.L de C.V Bosque de Duraznos #69 - Torre B 1107-A Col.Bosques de las Lomas, México DF Tel: ventas@bhpenergy.mx /

3 Enduralux LED Canopy Light LCN3 Project Type Catalog No. Luminaire Data 10 in [255 mm] Weight 15 lbs [6.8 kg] 7.6 in [192 mm] 1.2 in [30 mm] 21.7 in [551 mm] 0.8 in [20 mm] 14.2 in [360 mm] 21.7 in [551 mm] 6.4 in [163 mm] 14.2 in [360 mm] Ordering Information Sample Catalog No. LCN3 60T MV CW 5S WH Product LCN3 No. & Type of LEDs 60T 80T 120T MV HV Voltage V V Nominal Color Temperature CW NW WW 5000K 4000K 3000K Distribution Finish 1 Drive Current 2 5S Type 5 Short WH White mA 530mA 620mA 700mA HBS 2X2 RK Options High Bay Suspension Mounting Existing 2x2 Box Style Canopy Retrofit Notes: 1 White standard, consult factory for other finishes.. 2 Non-field adjustable drive current. 620mA option is only available for 80T. Refer to performance data on page mA option is not available for 120T Leotek Electronics USA LCN3 v Specifications subject to change without notice

4 Enduralux LED Canopy Light LCN3 Housing Die formed aluminum housing and tempered - num electrical box connects to luminaire via threaded aluminum stem with two electrical above. hours of life. LEDs are tested in accordance - related color temperature of 5000K (standard) and 70 minimum CRI. LEDs are 100% mercury and lead free. produces 0% total lumens above 90⁰ (BUG Electrical Power supply features a minimum power fac- (THD). EMC meets or exceeds FCC CFR Part 15. Transient voltage complies with ANSI C62.41 Cat. A. Integral surge protector is tested per ANSI/IEEE C62.45 procedures based on ANSI/ - Finish Housing receives a fade and abrasion resistant, Luminaires are UL listed for use in non-ic Photometry Luminaires are photometrically tested by Warranty 10-year limited warranty is standard on all luminaires and components. Performance Data Type 5S No. of LEDs & Type Drive Current (ma) (W) Delivered Lumens (Lm) (Lm/W) B3 U0 G0 60T B3 U0 G B3 U0 G0 80T B3 U0 G B4 U0 G1 120T B4 U0 G Leotek Electronics USA BHP Energy México S. de R.L de C.V Bosque de Duraznos #69 - Torre B 1107-A Col.Bosques de las Lomas, México DF Tel: ventas@bhpenergy.mx /

LED Outdoor Canopy Luminaires Flush Mount LCN3 Series EnduraLux Installation Guide This procedure is designed as an installation aid.

installation. Licensed electricians should provide electrical installation connections.

In no way is this document intended to construe warranty or fitness of use of the products described, nor is it intended to provide

WARNING LCN3 Series Installation Guide Page 1 of 4 Before proceeding with installation or service maintenance of this product:

Inspect this properly packaged product for any damage that may have occurred during transit.

5 LED Outdoor Canopy Luminaires Flush Mount LCN3 Series EnduraLux Installation Guide This procedure is designed as an installation aid. Skilled trades people that are familiar with general construction and electrical installation techniques should perform the installation. Licensed electricians should provide electrical installation connections. Installations and connections should be done in accordance with all national and local codes and permits. In no way is this document intended to construe warranty or fitness of use of the products described, nor is it intended to provide safety instruction for those installing the product. WARNING LCN3 Series Installation Guide Page 1 of 4 Before proceeding with installation or service maintenance of this product: Disconnect power to reduce electrical shock risk. Review the entire Installation Guide. Inspect this properly packaged product for any damage that may have occurred during transit. Verify product application complies with manufacturer design recommendations. Verify the availability of necessary tools and incidental material. Verify applicable code requirements. Field assembly and installation are subject to acceptance by local inspection authority. Appropriate safety equipment to be determined by end user, per applicable safety standards and precautions.

Nuts 4 10 Aluminum Tube (Shown with included hex nut attached.

6 LCN3 Canopy Luminaire Content Details Part # Part Name Qty. Canopy Deck 1 Fixture Housing 1 2 Mounting Studs 4 3 Lower Housing Gasket 1 4 Fixture Wiring Assembly 1 5 Lower Canopy Plate 1 6 Above Canopy Gasket 1 7 Upper Canopy Plate 1 8 Gasket Washers 4 9 Cap Nuts 4 10 Aluminum Tube (Shown with included hex nut attached.) 11 Junction Box 1 12 Hole Plugs (AC Input Hole) 2 13 Hex Nut (For Junction Box) 1 14 Junction Box Cover 1 15 Power Supply Quick Connector/Wiring Assembly 16 Screws (For Junction Box Cover) LCN3 Series Installation Guide Page 2 of 4 LCN3 Canopy Luminaire Installation A Step 1 - Open the carton and remove the top foam layer. Lay the fixture, with the glass face down, on top of the foam layer, to prevent damage to the finish. In Fig. 1, the back of the fixture housing is visible, A showing integral mounting studs and gasketing around center threaded entry. Fig. 1

B Step 2 - Remove mounting hardware from box B.

place plate over the four studs and threaded entry. Fig. 2 C Fig.

fixture housing into position against the canopy, aligning the fixture below the canopy square with canopy joints. Fig.

and apply more silicone RTV sealant on top of the gasket.

7 B Step 2 - Remove mounting hardware from box B. With fixture facing glass down on the foam sheet, feed the wiring assembly through the center hole of the lower canopy plate C, then place plate over the four studs and threaded entry. Fig. 2 C Fig. 3 D Step 3 - For new construction, drill five holes with the included drilling template, or cut a 4 diameter hole into the canopy deck surface. For retrofit into 4 diameter hole from underneath the canopy, position the studs through the 4 diameter canopy hole D and secure the fixture housing into position against the canopy, aligning the fixture below the canopy square with canopy joints. Fig. 4 E Step 4 - Apply room temperature silicone vulcanizing (RTV) sealant around the 4 hole, then place the round gasket over the 4 studs E and apply more silicone RTV sealant on top of the gasket. LCN3 Series Installation Guide Page 3 of 4 F G H I Step 5 - While supporting fixture housing from below, place the upper canopy plate F over the studs and threaded coupling G. Install washers with rubber gasket facing down H and then finger tighten the cap nuts I. Securely tighten the cap nuts to provide a secure seal. Fig. 5 J K Step 6 - From the back of the fixture housing, feed the wiring assembly through the aluminum tube, gasket end down J, then screw the aluminum tube into the threaded coupling K, and hand tighten. Fig. 6

L Step 7 - Feed the wiring assembly through the aluminum tube and screw gasket end onto the threaded nipple and tighten. L Fig.

Feed the wiring assembly through the opening in the bottom of the junction box M, then screw the remaining hex nut N onto the

9 O P Q Step 9 - Attach the junction box cover to the side of the junction box.

P Note: Some LCN3 models may have 2 power supplies and 2 wiring assemblies.

Connect the supply wiring to the AC input wiring on R the power supply(ies). LCN3 Series Installation Guide Page 4 of 4 R Fig.

8 L Step 7 - Feed the wiring assembly through the aluminum tube and screw gasket end onto the threaded nipple and tighten. L Fig. 7 M N Step 8 - Remove the top cover of junction box. Feed the wiring assembly through the opening in the bottom of the junction box M, then screw the remaining hex nut N onto the threaded aluminum tube. Position box for conduit entry, and securely tighten hex nut. Fig. 8 Fig. 9 O P Q Step 9 - Attach the junction box cover to the side of the junction box. O Connect the fixture housing DC wiring assembly to the power supply quick-connector(s). P Note: Some LCN3 models may have 2 power supplies and 2 wiring assemblies. Step 10 - Mount the supply wiring conduit to the junction box Q using a liquid-tite connector. Connect the supply wiring to the AC input wiring on R the power supply(ies). LCN3 Series Installation Guide Page 4 of 4 R Fig. 10 Step 11 - Mount the cover of the junction box onto the lower housing and securely tighten screws. S Installation complete. Fig. 11 S BHP Energy México S. de R.L de C.V Bosque de Duraznos #69 - Torre B 1107-A Col.Bosques de las Lomas, México DF Tel: ventas@bhpenergy.mx / Please visit Leotek Electronics USA Corp. at V Information provided subject to change without notice.

9 2x2RK(Existing2x2BoxStyleCanopyRetrofit)Option

ARIETA 13 Architectural LED Area Luminaire AR13 N-Series Specification Data Sheet

ARIETA 13 Architectural LED Area Luminaire AR13 N-Series Specification Data Sheet Luminaire Data Weight 15.4 lbs [7 kg] EPA 0.47 ft 2 Project Type Catalog No. 25.6 in [650 mm] 8.0 in [203 mm] 13.5 in [343 mm] 3.78 in [96 mm] Ordering Information Sample Catalog No. AR13 48N MV NW 5 BK