AIR LINE ACCESSORIES 372

Size: px
Start display at page:

Download "AIR LINE ACCESSORIES 372"

Transcription

1 372 Series

2 AIRPRO IN-LINE FILTERS Compressed air may contain impurities which will cause improper operation of equipment, and in some cases equipment failure. In-line filters will reduce downtime and prevent costly repairs of tools in addition to extending their life This filter has a large, porous Bronze element to remove water and oil particles from contaminated air supplies and to ensure a clean supply of air Lightweight and compact Connects directly to the tool Standard 40 micron element for minimum pressure drop S Designed specifically for the protection of small air tools Air line filters are used directly before the air tool Body: Anodized aluminium Filter element: 40 micron bronze Maximum Working Pressure: 300 PSI Temperature Range: 2 C to 93 C MAXPRO IN-LINE FILTER Thread NPT Length mm.119 1/ / / /2 97 Lightweight and compact Large element to remove water and oil particles from contaminated air supplies Connects directly to the tool Clear reservoir shows accumulated water taken out of air line Filter element can be removed and cleaned Button relief valve for draining trapped liquid from reservoir Body: Painted aluminium Male fitting: Steel plated Filter element: 40 micron Bronze Reservoir: Polycarbonate Maximum Working Pressure: 125 PSI Thread Length NPT mm.106 1/

3 S IN-LINE DESICCANT DRYER / FILTER This disposable in-line point-of-use desiccant dryer removes all traces of water vapor, oil vapor and dirt. A 40 micron porous Bronze element removes fine dirt particles, an oil adsorbing media removes oil vapor, and desiccant beads absorb water vapor. Compact size Lightweight See-through housing shows desiccant color change (from the original blue to a pink color when it needs to be replaced) Housing made of a highly chemical-resistant material Installed right at the point of use Disposable Removes Oil Vapor IDEAL FOR PAINT GUNS Removes Dirt Clean, dry air Often used directly upstream of paint gun as final protection Housing: Polycarbonate Removes Residual Desiccant Dust Removes Water Vapor Air contaminated by water and oil vapors Guard: Nylon Pressure Dew Point: -40 C Maximum Working Pressure: 125 PSI Maximum Flow Capacity: 15 SCFM Working Temperature Range: 0 C to 50 C Filter element: 40 micron bronze Thread NPT Length mm.150 1/

4 SaveAir IN-LINE PRE-SET ENERGY SAVING MINIATURE REGULATOR SAFETY The in-line pre-set energy saving miniature regulator SaveAir can be installed in every compressed air system. It supplies a constant, exact outlet pressure regardless of the input pressure. The pressure is factory-set and cannot be changed. The SaveAir prevents dynamic pressure waste. This arises when the pressure and throughput at the withdrawal point are unnecessarily higher than those specified by the manufacturer to achieve the desired function. " Dynamic pressure waste " is extremely costly, a waste of energy. Increase user safety by avoiding pressure surges Limit over-consumption of compressed air, thereby reducing energy costs Highly reliable Safe Tamper-proof Maintenance free Lightweight and compact Heavy duty construction S Pressure In Pressure Out Ideal for most air tools Blow guns in order to respect safety standards (maximum pressure of 30 PSI) Paint shops Compressed air network Maximum 30 PSI Maximum 90 PSI Maximum Inlet Pressure: 250 PSI Working Temperature Range: 0 C to 80 C To make a non-restricted blow gun safe to use To ensure proper air tool pressure Pre-Set Pressure PSI * Connection (F) NPT Flow SCFM / / / / / / / /4 25 * +/- 10% FACTS TO KNOW The ideal pressure for pneumatic tools is usually 90 PSI. Every 15 PSI of over-pressure wastes from 6 to 10% more energy. Pre-set regulators are an economical way to maintain ideal pressure 375

5 S Toolreg MINIATURE PRE-SET REGULATORS WITH AUTOMATIC SECONDARY PRESSURE RELIEF SAFETY Vents residual pressure to avoid accidental tool activation after disconnection Saves energy Tamper proof Lightweight and compact ToolReg 3 7 The Toolreg can be mounted directly on the pneumatic tool in order to ensure correct pressure, so that possible pressure drops in hoses, tubes etc. do not influence the pressure at the tool. Furthermore, the residual pressure in the tool is relieved when it is removed from the compressed air supply line, preventing unintentional activation of the tool with disastrous consequences. Toolreg regulators are an economical method to achieve the ideal pressure at the tool. Pneumatic tools, particularly nailers Body: Aluminium Spring: Stainless steel Valve: Brass Seals: Nitrile Maximum Inlet Pressure: 355 PSI Working Temperature Range: 0 C to 80 C Maximum Air Flow: 25 SCFM to 90 PSI Pre-Set Pressure PSI Inlet (F) NPT /4 1/ /4 1/ /4 1/4 Outlet (F) NPT 376

6 COMPACT PRESSURE REGULATOR PISTON TYPE Solid control piston with lip seal for extended Life n-rising adjusting knob Easily serviced Lightweight and compact S Adjusting Nut: Brass Adjusting Stem & Spring: Steel Body: Zinc Bonnet, Seat, Piston & Valve Poppet: Plastic Seals: Buna-N/Nitrile Gauge: Plastic face Maximum Inlet Pressure: 300 PSI Temperature Range: 0 C to 52 C Reduced Pressure Range: 2 to 125 PSI Gauge Port Thread: 1/8 NPT Panel Mount Opening: 31 mm Port Size Flow (F) NPT SCFM.175 1/4 15 COMPACT PRESSURE REGULATORS DIAPHRAGM TYPE Unbalanced poppet design High sensitivity Diaphragm-operated for fast response n-rising adjusting knob Adjusting Screw and spring: Steel Body: Aluminium Bottom Spring: Stainless steel Spring Cage: Acetal plastic Inner valve: Brass Gauge: Plastic face Maximum Inlet Pressure: 300 PSI Temperature Range: 4 C to 52 C Reduced Pressure Range: 2 to 125 PSI Gauge Port Thread: 1/8 NPT Panel Mount Opening: 31.8 mm Port Size (F) NPT Flow SCFM.180 1/ /

7 S HVLP AIR REGULATORS Specially designed for tools and any spray gun (HVLP) for accurate pressure regulation Glass lens Lightweight air pressure regulator and gauge combination Precise air pressure control Push-to-lock knob avoids accidental pressure adjustements Unbalanced poppet design Lightweight and compact Paint guns and other air tools CERTIFIED N.S.F. & F.D.A. Adjusting screw: Steel Body: n-corrosif (acetal) Diaphragm: Buna-N/Nitrile Spring: Stainless steel Gauge: Glass face Maximum Inlet Pressure: 150 PSI Temperature Range: 4 C to 52 C Panel Mount Opening: 31.8 mm IDEAL FOR PAINT GUNS Port Size Pressure Flow (F) NPT Range SCFM.125 1/4 2 to 125 PSI /4 2 to 60 PSI Replacement gauge for Replacement gauge for.126 COMPACT AIR PRESSURE REGULATOR Compact air line regulators control pneumatic power at the tool to save air and tool wear without getting in the operator s way, to ensure exact tool performance Compact and lightweight Fewer parts - only 1/2 the parts of conventional air pressure regulators Vibration-proof adjustment stable after setting Easily adjustable with a screwdriver or a coin piston / diaphragm 378 Body: Anodized aluminium, plated steel and brass Gauge: Plastic face Inlet Pressure Range: 60 to 160 PSI Port Size Pressure Flow (F) NPT Range SCFM.130 1/4 20 to 110 PSI 15

8 MAXPRO AIR FLOW REGULATORS Air flow regulators restrict air flow to the tool. This results in a pressure drop while the tool is running. IN-LINE AIR FLOW REGULATOR Air flow regulators must therefore be used in conjunction with a pressure regulator installed upstream. Air flow regulators should only be used for fine tuning air flow at the tool. Eliminates the need to estimate and compensate for pressure drop caused by length of hose Allows the painter to control air flow at the paint gun Brass body Plastic face S Specially designed to control air flow to air tools and HVLP spray guns Thread Pressure NPT Range.105 1/ PSI IN-LINE AIR FLOW REGULATOR Made from solvent-resistant Nylon Plastic face Polymer body Specially designed to control air flow to air tools and HVLP spray guns Thread Pressure NPT Range.104 1/ PSI IN-LINE AIR FLOW REGULATOR.101 1/4 Thread NPT Permits air flow control in either direction Connects directly to air tool and hose Knurled knob sets desired flow rate See the video «Ergonomic connection» at.com 379

9 S AIRPRO IN-LINE LUBRICATORS Pneumatic tools and appliances cannot maintain their full efficiency if the mechanism is impaired by corrosion, condensation or lack of lubrication. In-line lubricators allow air tools to operate at full efficiency by preventing sticking, thereby extending service life. Effective tool lubrication saves money by reducing equipment down time. Ideal for most air tools Ideal for intermittent use type tools such as staplers Body: Hard anodized aluminium Insert: Nylon Nut: Cadmium plated steel Seals: Buna-N/Nitrile Maximum Pressure: 150 PSI Temperature Range: 0 C to 52 C Port Threads: Inlet Port (F) NPT: n swivel Outlet Port (M) NPT: Swivel Keep air-operated hand tools working better and longer Provide instant oil flow so critical to time cycled air tools such as staplers and nailers Attach directly to the air tool inlet An effective alternative to larger, more costly units that may not deliver lubricant to the tool due to excessive hose length Automatic lubrication of air upon passage of rated air flow Will not leak lubricant into the air line upon pressure drop or when disconnected from the air line Operate in any position Slotted oil adjustment screw under filler cap Compact and lightweight Corrosion resistant 360 o swivel outlet port Maximum Flow Rate SCFM Thread NPT.110 1/ / / / Please see page 460 for typical air tool consumptions Oil Capacity cc Oil Fill Plug MAXPRO IN-LINE LUBRICATOR Maximum Working Pressure: 120 PSI Inlet Outlet (F) NPT (F) NPT.108 1/4 1/4 Automatically lubricates a tool by feeding a measured amount of oil mist each time the tool is cycled When stationary lubricators are not available, these mini in-line oilers will provide an excellent oil source while adding only 2 length to any tool Clear Plastic reservoir makes oil supply visible See the video «Ergonomic connection» at.com 27_05_2016

10 AIRPRO FREE ANGLE FITTINGS 45º Air tools in assembly line ERGONOMIC 360 circular rotation and 45 angled rotation Two rotation points prevent kinking of the supply line Help alleviate Carpal Tunnel Syndrome and back stress resulting in fewer lost-time injuries Steel dust cover protects rotating joint Lightweight, streamlined design Full flow design (7.0 mm) Male threads have a self-sealing coating S Nickel plated steel Thread sealant on male fittings Maximum Working Pressure: 145 PSI Temperature Range: -7 C to 60 C 45º Description Steel Ball Bearings Steel Shaft NBR Packaging.312C 1/4 (M) NPT x 1/4 (F) NPT.315C 3/8 (M) NPT x 3/8 (F) NPT Full Flow I.D. Two Independent-Rotation Points Description.321C 1/4 (M) NPT x 1/4 INDUSTRIAL.324C 3/8 (M) NPT x 3/8 INDUSTRIAL Description.326C 1/4 (M) NPT x ULTRAFLO 381

11 S AIRPRO FREE ANGLE FITTINGS 75º Industrials, pneumatic tools Nickel plated steel Polyurethane dust cover Thread sealant on male fittings ERGONOMIC Designed to provide 360 circular rotation and up to 75 of angle for air tool and air hose supply lines Saves time and energy by preventing kinking of the air supply line Improve tool maneuverability and reduce the fatique of the operator Help alleviate Carpal Tunnel Syndrome and back stress resulting in fewer lost-time injuries Full flow design Lightweight, streamlined design Polyurethane dust cover protecting delicate surfaces Male threads have a self-sealing coating Maximum Working Pressure: 145 PSI Temperature Range: -20 C to 60 C 75º Description.382 1/4 (F) NPT x 1/4 (M) NPT.383 3/8 (F) NPT x 3/8 (M) NPT de produit Description.385 1/4 INDUSTRIAL x 1/4 (M) NPT.387 3/8 INDUSTRIAL x 1/4 (M) NPT 382

12 MAXPRO FREE ANGLE FITTINGS ERGONOMIC Eliminate hose kinking Reduce hand, wrist, elbow and shoulder stress from heavy or non-flexible air hose Help alleviate Carpal Tunnel Syndrome and back stress resulting in fewer lost-time injuries S Ideal for hand-held air tools, nailers and staplers, blow guns, ratchets and sanders Maximum Working Pressure: 140 PSI Temperature Range: -20 C to 60 C WARNING Free angle fittings should not be used on impact tools or in areas of high mechanical abuse MAXPRO 45º Nickel plated steel Polyurethane dust cover Description.412 1/4 (F) NPT x 1/4 (M) NPT Description.415 3/8 (F) NPT x 3/8 (M) NPT Description.400 1/4 (M) NPT x 1/4 (M) NPT Description.421 1/4 D.I. x 1/4 (M) NPT Description.430 1/4 INDUSTRIEL x 1/4 (M) NPT Designed to provide 360 of rotation and up to 45 of angle for air tool and air hose supply lines Dual ball-pivot design is simple and tough for long life Polyurethane dust cover protects rotating joint and prolongs the service life of the fitting 45º MAXPRO 30º Nickel plated steel Free angle fittings are designed to provide 360 of rotation and up to 30 of angle for air tool supply lines 30º Description.350 1/4 (M) NPT x 1/4 (M) NPT Description.355 1/4 (F) NPT x 1/4 (M) NPT Description.360 1/4 INDUSTRIEL x 1/4 (M) NPT Description.365 ARO 210 x 1/4 (M) NPT Description.370 ULTRAFLO x 1/4 (M) NPT See the video «Ergonomic connection» at.com 27_05_

13 S AIRPRO AIR TOOL SWIVEL CONNECTORS COMPOSITE MODELS ERGONOMIC Universal joint that connects portable air tools to an air line Improves tool manoeuvrability, minimizes operator fatigue and extends hose life Swivels 360 at two pivot points, allowing the air hose to drop directly to the floor, while providing superb tool handling.704 ALUMINIUM MODELS.720 with flow control For use with most air tools such as: Grinders - Staple guns - Buffers -Spray guns - Glue guns Sanders - Drills &.720: Lightweight, non-marking composite : Aluminium Maximum Working Pressure: 150 PSI WARNING.706 Air Tool Swivel Connectors should not be used on impact tools or in areas of high mechanical abuse.708 See the video «Ergonomic connection» at.com Thread NPT Materials Maximum Air Flow SCFM.704 1/4 Composite /4 Composite /4 Aluminium /8 Aluminium /2 Aluminium

14 UNIMAX AIR TOOL SWIVEL CONNECTORS.705 Swivel connector ERGONOMIC THE solution to coupler confusion Accept type plugs: ULTRAFLO, 1/4 INDUSTRIAL, ARO 210, 1/4 TRUFLATE and LINCOLN Universal connector that connects portable air tools to an air line Improve tool manoeuvrability, minimize operator fatigue and extends hose life Swivel 360 at two pivot points, allowing the air hose to drop directly to the floor, while providing superb tool handling S.712 Swivel connector with flow regulator AIR TOOL SWIVEL CONNECTORS WITH QUICK COUPLERS Accepts 5 type of plugs.710 Swivel connector with flow regulator and UNIMAX UNIVERSAL coupler.714 Swivel connector with UNIMAX UNIVERSAL coupler For use with most air tools such as: Grinders Glue guns Staple guns Sanders Buffers Drills Spray guns Brass and anodized aluminium Maximum Working Pressure: 200 PSI Temperature Range: -35 C to 120 C Thread NPT Description.705 1/4 Swivel Connector.712 1/4 Swivel Connector with Flow Regulator.710 1/4 Swivel Connector with Flow Regulator and Universal UNIMAX Coupler.714 1/4 Swivel Connector with Universal UNIMAX Coupler WARNING Air tool swivel connectors should not be used on impact tools or in areas of high mechanical abuse 385

15 S AIR MANIFOLD (2 IN 1) Allows the supply up to 2 air tools from a single air supply Compact design Kits available with plug and couplers C (1/4 INDUSTRIAL) Body: Nickel brass AIR MANIFOLD (3 IN 1) Inlet NPT Outlets NPT.850 1/4 (F) 1/4 (F).860 1/4 (M) 1/4 (F) Eliminates the need to connect and disconnect pneumatic tools whenever one wants to change tooling Allows the supply of up to 3 air tools from a single air supply Compact and lightweight Body: Aluminium ( ) Brass (.810).810 Inlet (F) NPT Outlets (F) NPT.800 1/4 1/ /8 1/ /4 1/4 MAXQUIK AIR MANIFOLDS WITH QUICK COUPLERS AND PLUG (3 IN 1) Holes for securing the manifold to a stable surface using nails Description C 1/4 INDUSTRIAL Kit C ARO 210 Kit 386

16 HOSE WHIPS TOPFLEX Using a hose whip between the air tool and coupler will extend the life of the coupler by acting as a shock absorber and protecting it against tool vibration. A hose whip allows the operator an easier and wider range of motion, reducing worker fatigue while increasing productivity. ERGONOMIC Increase the lifespan of the connector and the main pipe Improve tool manoeuvrability Excellent flexibility Lightweight Excellent oil resistance S Tube: Black Nitrile Reinforcement: One fiber braid Fittings: Brass Maximum Working Pressure: 300 PSI Working Temperature Range: -40 C to 100 C TECH TIP All sharp bends on hose lines should be avoided. These tend to shorten hose life, increase pressure drop, retard swivel action, increase pump load and raise the temperature of the fluid. A hose whip should be installed to avoid strain on hose and coupler assembly. TOPFLEX. Overall Length in Overall Length cm Hose I.D. in Inlet (M) NPT.522 1/ /4 1/ / /4 1/ / /4 1/ / /4 1/ / /8 3/ / /8 3/ / /2 1/ / /2 1/2 Outlet (F) NPT HOSE WHIPS EASYflex PREMIUM ERGONOMIC Increase the lifespan of the connector and the main pipe Improve tool manoeuvrability Excellent flexibility Lightweight Excellent oil resistance Tube: Yellow Technopolymer Reinforcement: Spiral polyester cords Fittings: Brass Maximum Working Pressure: 300 PSI Working Temperature Range: -54 C to 65 C Overall Length in Overall Length cm. Hose I.D. in Inlet (M) NPT.523 1/ /4 1/ / /4 1/ / /4 1/ / /4 1/ / /4 1/ / /8 3/ / /8 3/ / /2 1/ / /2 1/2 Outlet (F) NPT 387

17 S HOSE WHIP KITS WITH COUPLER AND PLUG ERGONOMIC Provides an ergonomic connection and extends coupler life Hose made of technopolymer EASYflex PREMIUM.560C 30º.561C.5C.563C Overall Length in Overall Length cm. Hose I.D. in Plug (M) NPT Coupler (F) NPT.560C 3/ /4 INDUSTRIAL (20.242) 1/4 INDUSTRIAL (20.842).561C 3/ ARO 210 (23.242) ARO 210 (23.842).5C 3/ ULTRAFLO (31.642) ULTRAFLO (31.742).563C 3/ /4 INDUSTRIAL (20.242) MAXPRO 30 (.355) 388

18 FOR AN OPTIMAL CONNECTION AT THE TOOL! FEMALE PLUG COMPRESSOR + P.T.F.E. TAPE Go online to watch the video " Ergonomic air tool connection " AIR HOSE LUBRICATOR * OIL OPTIONAL AIRFLOW REGULATOR WITH GAUGE + or and / or or FEMALE COUPLER SWIVEL CONNECTOR " Air hose repair " or provides best ergonomics / must be assembled with a coupler MALE PLUG SWIVEL ANGLE PLUG or provides best ergonomics TOOL Visit the " VIDEOS " section at.com TECH TIP It is important to check the specifics of the air tool to ensure adapted connection. Plug and coupler must be compatible (same type). * t suitable for paint guns 389

Air Compressor Pumps. Best Pump Warranty In The Industry. Single Stage Cast Iron Compressor. Two Stage Cast Iron. Compressor C B

Air Compressor Pumps. Best Pump Warranty In The Industry. Single Stage Cast Iron Compressor. Two Stage Cast Iron. Compressor C B 106 South Lake Court, Lexington, SC 29073 Tel: 803-356-4777 Fax: 803-356-4737 Air Compressor Pumps Best Pump Warranty In The Industry The Mi-T-M Pump Exchange Program provides pump replacement for the

More information

Model Model 815

Model Model 815 Model 600004 Model 600204 Model 85387 Model 600104 Model 815 ir line products and accessories ir couplers and nipples............................... 196 low guns, tire inflators and siphon sprayers.............

More information

Dynaswivel. Air Line Connectors. Ball-Swivel Plug. Never Fight an Air Tool Again! For Use with Most Air Tools THE PROBLEM THE SOLUTION

Dynaswivel. Air Line Connectors. Ball-Swivel Plug. Never Fight an Air Tool Again! For Use with Most Air Tools THE PROBLEM THE SOLUTION Dynaswivel Air Connectors Never Fight an Air Tool Again! For Use with Most Air Tools THE PROBLEM Aluminum and Stainless Steel Construction Single Pivot Right angle single-pivot swivels 360 at one location.

More information

AIR PREPARATION PRODUCTS. Table of Contents

AIR PREPARATION PRODUCTS. Table of Contents AIR PREPARATION PRODUCTS Table of Contents Page Air Filters................................................. 5-7 Oil Removal Filters......................................... 8-9 Regulators..............................................

More information

AIR HOSE / COUPLERS Air Hose / Couplers For Use with 3538, 3539 ColorConnex Green Coupler Type B, 1/4 in MNPT

AIR HOSE / COUPLERS Air Hose / Couplers For Use with 3538, 3539 ColorConnex Green Coupler Type B, 1/4 in MNPT 3536 For Use with 3538, 3539 ColorConnex Green Type B, 1/4 in FNPT 3541 For Use with 3543, 3544 ColorConnex Blue Type C, 1/4 in FNPT 3537 For Use with 3538, 3539 ColorConnex Green Type B, 1/4 in MNPT 3542

More information

PNEUMATIC MUFFLERS 550

PNEUMATIC MUFFLERS 550 550 Series PNEUMATIC MUFFLERS Our modern world is a dynamic, fast-moving, noisy place. On the job, workers are exposed to the sounds of industrial equipment, machinery and power tools. All of these loud

More information

I-4057-F CleanAir Air Control Equipment. Accessories for superior spray finishing. Filters Regulators Gauges Valves WATERBORNE COMPATIBLE

I-4057-F CleanAir Air Control Equipment. Accessories for superior spray finishing. Filters Regulators Gauges Valves WATERBORNE COMPATIBLE I-4057-F 2-01 CleanAir Air Control Equipment Accessories for superior spray finishing. Filters Regulators Gauges Valves WATERBORNE COMPATIBLE Air control equipment for today s spray finishing challenges.

More information

RAZOR. RAZOR HVLP Spray Guns

RAZOR. RAZOR HVLP Spray Guns RAZOR RAZOR HVLP Spray Guns Provides generous material flow that helps you get the job done quickly Offers exceptional atomization rate Promotes a superior finish Proven effective for clear coat, base

More information

Fluid Power Accessories

Fluid Power Accessories Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 PNEUMATIC EXHAUST MUFFLERS Breather Vents 2,3 Exhaust Mufflers 2-5 Reclassifiers / Mufflers 6,7 BREATHER VENTS Speed

More information

AIR TOOLS & ACCESSORIES AIR TOOLS & ACCESSORIES HI-FLO COUPLERS AIR TOOLS & ACCESSORIES ACCESSORIES. Hi-Flo & Couplers

AIR TOOLS & ACCESSORIES AIR TOOLS & ACCESSORIES HI-FLO COUPLERS AIR TOOLS & ACCESSORIES ACCESSORIES. Hi-Flo & Couplers HI-FLO Increased airflow to provide maximum torque and optimal performance Push-To-Connect for easy connect/disconnect Includes (1) Male Coupler, (2) Female Couplers, (3) Female Plugs, and (4) Male Plugs

More information

Composite Push-In Fittings BSP/Metric Series 7000

Composite Push-In Fittings BSP/Metric Series 7000 2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,

More information

Installation Components AirCare Air Preparation Systems

Installation Components AirCare Air Preparation Systems Care Preparation Systems Modular Line Filters 602104 602106 602108 * Transparent 602109 nylon liquid level indicator -18 lens. to 79 C Body Bowl Material icle Zinc Aluminum Zinc* Aluminum* Sintered Polypropylene

More information

FRL/AirCare Air Controls & Accessories

FRL/AirCare Air Controls & Accessories FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor

More information

Recoil Hose. Polyurethane. Recoil Hose. Hytrel Recoil Hose BENEFITS SPECIFICATIONS ORDERING INFORMATION BENEFITS SPECIFICATIONS ORDERING INFORMATION

Recoil Hose. Polyurethane. Recoil Hose. Hytrel Recoil Hose BENEFITS SPECIFICATIONS ORDERING INFORMATION BENEFITS SPECIFICATIONS ORDERING INFORMATION Polyurethane Recoil Hose Greater durability than Nylon or Hytrel recoil hoses due to exceptional wear characteristics Longer life expectancy due to kink resistant properties Superior recoil memory due

More information

AirPro Advanced Spraying Technology for Automotive, Metal, Wood, Waterborne, High Wear and Adhesive Applications

AirPro Advanced Spraying Technology for Automotive, Metal, Wood, Waterborne, High Wear and Adhesive Applications AirPro Advanced Spraying Technology for Automotive, Metal, Wood, Waterborne, High Wear and Adhesive Applications AirPro Air Spray Gun Advanced Spraying Technology Whether you are a custom shop or a high

More information

Pneumatic Products st»

Pneumatic Products st» » Pneumatic Products » Industry Standouts for Over 50 Years The benefits of an innovative, pneumatic coupling design were solid enough to single-handedly launch CEJN in 1955. This reliable, easy-to-handle

More information

Industry Standouts for Over 50 Years

Industry Standouts for Over 50 Years » Pneumatic Products » Industry Standouts for Over 50 Years The benefits of an innovative, pneumatic coupling design were solid enough to single-handedly launch CEJN in 1955. This reliable, easy-to-handle

More information

Model Model Model

Model Model Model Filter Separators Model 9003 Model 9004 Model 9001 & 9032 Model 9002 EXAIR's Filter Separators remove water, dirt and rust from your compressed air system. They prevent these contaminants from plugging

More information

FILTERS, REGULATORS & LUBRICATORS

FILTERS, REGULATORS & LUBRICATORS FILTERS, REGULATORS & LUBRICATORS Infinity filters remove solid particles and condensate produced by the compressor. The range includes standard filters, regulators and lubricators for points of use. OFR

More information

74 Series Combination Filter/Regulator and Lubricator Unit, featuring an in-line shut-off valve, and Quikclamp system.

74 Series Combination Filter/Regulator and Lubricator Unit, featuring an in-line shut-off valve, and Quikclamp system. NCA-33 January 1998 Supersedes November 199 EXCELON Series System Features...2 EXCELON Series Product Features... Filters F72G General Purpose Filters... F73G General Purpose Filters...8 F7G General Purpose

More information

funnels, measures, gravity cocks, jerry cans and oil suction pumps...

funnels, measures, gravity cocks, jerry cans and oil suction pumps... funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................

More information

2 YEAR WARRANTY HOSE REELS. reelmaster Series heavy duty, quality hose reel engineered to save space

2 YEAR WARRANTY HOSE REELS. reelmaster Series heavy duty, quality hose reel engineered to save space STANDARD CAPacity 1400 Series 1400 Series heavy duty, quality hose reel engineered to save space 1400 Series* Holds up to 40 of 1/2 Hose For 1/4, and 1/2 I.D. Hose Swivel inlet: 1/2 NPSM Low pressure 1/2

More information

Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings

Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:

More information

High-Pressure Airless Accessories High-Pressure Equipment for Protective Coatings

High-Pressure Airless Accessories High-Pressure Equipment for Protective Coatings High-Pressure Airless Accessories High-Pressure Equipment for Protective Coatings Genuine Graco Genuine Graco parts and accessories make the difference Get superior spray results with Graco parts Rely

More information

LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.

LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading. hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI

More information

2004 Industrial. Air Compressors. Mi-T-M CORPORATION

2004 Industrial. Air Compressors. Mi-T-M CORPORATION 00 Industrial Mi-T-M CORPORATION Hand Carry - Gallon Electric/Gasoline - Single Stage Gallon-Single. Quality single stage compressor. Aluminum oil lubricated crankcase. Aluminum head for heat dissipation.

More information

LOC-LINE the original modular coolant hose system

LOC-LINE the original modular coolant hose system endless solutions, flexibility & performance COOLANT CONTROL LOC-LINE the original modular coolant hose system 8 1 9 8 6 13 4 The combinations and flexibility offered by Loc-Line shows that whatever your

More information

Installation Components AirCare Air Preparation Systems

Installation Components AirCare Air Preparation Systems Modular Line Filters 602104 602106 602108 602109 250 psig / 17 bar Body Material icle Zinc Zinc* * Sintered Polypropylene 40µ 602104 Drain Type Port PTF ¹ ₄ 602106 Manual ³ ₈ A B C Dia. 5.27 / 1.34 0.75

More information

Pencil Grinders hp, 0.4 hp Die Grinders hp Die Grinders hp Die Grinders...101

Pencil Grinders hp, 0.4 hp Die Grinders hp Die Grinders hp Die Grinders...101 Pencil Grinders...92 0.33 hp, 0.4 hp Die Grinders...95 0.4 hp Die Grinders...96 0.5 hp Die Grinders...101 0.55 hp Die Grinder...104 0.7 hp Die Grinders...105 1.0 hp Die Grinders...107 92 Pencil Grinders

More information

INDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS. 143

INDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS.  143 8 INDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS www.charlandthermojet.com 143 T-70 SERIES INDUSTRIAL AUTOMATIC SPRAY NOZZLE GUN Ideal for many cleaning tasks in every kind of industrial

More information

Bellows Pumps. The Newest Technology in Piston Pumps

Bellows Pumps. The Newest Technology in Piston Pumps Bellows Pumps The Newest Technology in Piston Pumps Merkur Bellows The gentle pumping action of the Merkur Bellows Pump, combined with reduced sealing surfaces, provides superior handling of shear-sensitive

More information

TECHNICAL VALVES PRINCIPLE OF OPERATION DOROT PLASTIC VALVES. 3-Way Control System. 2-Way Control System T48

TECHNICAL VALVES PRINCIPLE OF OPERATION DOROT PLASTIC VALVES. 3-Way Control System. 2-Way Control System T48 DOROT PLASTIC VALVES PRINCIPLE OF OPERATION -Way Control System The main valve is controlled by a manually, electrically or pressure actuated selector that: (1) Introduces the upstream pressure or an external

More information

Pneumatic mufflers. For compressed air systems, machines, pumps, compressors, etc. Dimensions 1/8 6 Internal or external thread BSP or NPT thread

Pneumatic mufflers. For compressed air systems, machines, pumps, compressors, etc. Dimensions 1/8 6 Internal or external thread BSP or NPT thread Pneumatic mufflers Harmful noise levels often occur in the field of pneumatics and vacuums. We have a range of high-quality silencers which effectively reduce noise with minimal impact on air throughflow.

More information

Vacuum Models Central Vacuum Pencil Grinder hp Vacuum Die Grinders hp Vacuum Die Grinders hp Vacuum Die Grinders...

Vacuum Models Central Vacuum Pencil Grinder hp Vacuum Die Grinders hp Vacuum Die Grinders hp Vacuum Die Grinders... Non-Vacuum s Pencil Grinders...47 Quick-Change Pencil Grinder...49.4 hp Die Grinders...52.5 hp Die Grinders...59.55 hp Die Grinder...62.7 hp Die Grinders...63 1 hp Die Grinders...67 Vacuum s Central Vacuum

More information

MicroCoat System Operating Manual MC4000 Series MC785M, MC785M-WF Spray Valves

MicroCoat System Operating Manual MC4000 Series MC785M, MC785M-WF Spray Valves MicroCoat System Operating Manual MC Series MC785M, MC785M-WF Spray Valves A NORDSON COMPANY Introduction The MicroCoat System provides precise lubrication control for metal stamping operations. The MC

More information

MACH 1A HVLP (MACH 1AV HVLP) Automatic Airspray Gun

MACH 1A HVLP (MACH 1AV HVLP) Automatic Airspray Gun MACH 1A HVLP (MACH 1AV HVLP) Automatic Airspray Gun Your new Binks MACH 1A HVLP Automatic Spray Gun is exceptionally rugged in construction, and is built to stand up under hard, continuous use. However,

More information

CenterFlo Pumps. Air Operated Double Diaphragm (AODD) Pumps. Automotive Commercial Industrial

CenterFlo Pumps. Air Operated Double Diaphragm (AODD) Pumps. Automotive Commercial Industrial CenterFlo Pumps Air Operated Double Diaphragm (AODD) Pumps Automotive Commercial Industrial CenterFlo NEW CenterFlo Technology Diaphragm Pumps Advanced Technology, Superior Performance, Low Maintenance.

More information

HYDRAULICS PUMP DESIGN CYLINDER DESIGN HYDRAULICS

HYDRAULICS PUMP DESIGN CYLINDER DESIGN HYDRAULICS HYDRAUL Sykes-Pickavant Loadstar Plus heavy duty pullers are renowned for their durability, immense pulling power and versatile range of kit options. Sykes-Pickavant hydraulic equipment builds upon the

More information

FLOW CONTROL VALVES & ACCESSORIES

FLOW CONTROL VALVES & ACCESSORIES TECHNICAL SPECIFICATIONS construction Valve group Materials Mounting Ports Position Operating temperature PNEUMATIC DATA Operating pressure Nominal pressure nominal flow needle-type Meter In, Meter Out,

More information

Thermoplastic Hose Quick Reference Guide

Thermoplastic Hose Quick Reference Guide Thermoplastic Hose Quick Reference Guide 4703 4700 SAE 100R3 SAE 100R7 Low Pressure Hydraulics High Pressure Pneumatics Hand Tools Lubrication System Pilot Lines and Joystick Controls General Hydraulics

More information

GREASE GUNS SECTION TWO. Battery Powered Grease Guns

GREASE GUNS SECTION TWO. Battery Powered Grease Guns Battery Powered Grease Guns and Accessories Professional Series Heavy Duty Series High Pressure Series Specialty Series Standard Duty Series Grease 1-866-4-ALEMITE Gun (866-425-3648) Accessories Alemite

More information

SECTION Pressure & Temperature Control

SECTION Pressure & Temperature Control 16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air

More information

Air / Hydraulic Pump

Air / Hydraulic Pump Form No. 538016 Parts List & Operating Instructions for: 2510A Original Instructions Air / Hydraulic Pump Maximum Capacity: 690 bar (10,000 psi) Description: The 2510A air/hydraulic pump is designed to

More information

Car Wash / Pressure Washer

Car Wash / Pressure Washer Car Wash / Pressure Washer PARTS & ACCESSORIES Proudly distributed by: We have many representatives in all 50 states. Give us a call to locate the one nearest you! Custom manufacturing available... ask

More information

QuickLINE_96.955_Version_28.Octobre.14. QuickLINE COMPRESSED AIR LINE SYSTEM

QuickLINE_96.955_Version_28.Octobre.14. QuickLINE COMPRESSED AIR LINE SYSTEM QuickLINE_96.955_Version_8.Octobre.4 QuickLINE COMPRESSED AIR LINE SYSTEM COMPRESSED AIR LINE SYSTEM QuickLINE Ready for immediate pressurization QUICK AND EASY TO INSTALL Excellent quality compressed

More information

Mini Fire-Ball 225, 50:1

Mini Fire-Ball 225, 50:1 Mini Fire-Ball 225, 5:1 Features and Benefits Non-corrosive air motor design for long life Double-acting pump ensures smooth fl uid fl ow Robust grease inlet cage withstands the most abusive handling Typical

More information

Spray Guns. Trans-Tech, HVLP & Conventional Advanced Technologies for the optimal mix of performance, ergonomics & efficiency

Spray Guns. Trans-Tech, HVLP & Conventional Advanced Technologies for the optimal mix of performance, ergonomics & efficiency Spray Guns P E R F O R M A N C E S E R I E S AUTOMATIC MANUAL TOUCH-UP Trans-Tech, HVLP & Conventional Advanced Technologies for the optimal mix of performance, ergonomics & efficiency www.devilbiss.com

More information

Vacuum Filters. Catalogue Edition 2

Vacuum Filters. Catalogue Edition 2 Vacuum Filters Catalogue Edition 2 INLINE VACUUM FILTERS Vacuforce plastic in-line filters provide easy monitoring, economy and safety. These shatterproof filters are 100% airtight, can withstand high

More information

Introduction to Inline Lubrication. Master Pneumatic

Introduction to Inline Lubrication. Master Pneumatic Introduction to Inline Lubrication Master Pneumatic What is the purpose of Inline Lubrication? Sentry Introduce atomized oil into the compressed air line to lubricate: Air Motors Cylinders Gears Sliding

More information

AUTOMOTIVE COMMERCIAL FARM INDUSTRIAL

AUTOMOTIVE COMMERCIAL FARM INDUSTRIAL AUTOMOTIVE COMMERCIAL FARM INDUSTRIAL Quality Air Accessories & Fittings TO OUR VALUED CUSTOMERS Since 1943, Milton Industries has strived to provide the marketplace with high quality dependable air accessories.

More information

Filters, Gauges, Regulators

Filters, Gauges, Regulators Filters, s, Regulators SCFM = Cubic ft/min at Ambient Condition s Sold Separately s...1/4" Flow SCFM...21 s...1/4" Flow SCFM...15 Filters - Construction Mini 1/4" 3000 Regulators Without Mini 1/4" 3100

More information

Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...

Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature... FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)

More information

COMPRESSED AIR FILTERS

COMPRESSED AIR FILTERS VALUE THROUGH PERFORMANCE D SERIES COMPRESSED AIR FILTERS Combining Advanced Technology with Traditional Deltech Quality D Series Filters D Series Benefits Easy element changeout Bowl is hand-threaded

More information

Lubrication Fittings. 1/4"-28 Taper Thread Fittings

Lubrication Fittings. 1/4-28 Taper Thread Fittings 1/4"-28 Taper Thread Fittings Used on most cars and trucks and many industrial machines. It is recommended that SAE-LT taper threads be assembled into 1/4"-28 UNF, Class 3B, straight threaded holes having

More information

PURESTREAM -FRL PURESTREAM - FRL. Installation / Operating / Maintenance Instructions Filter Series F1. Specifications.

PURESTREAM -FRL PURESTREAM - FRL. Installation / Operating / Maintenance Instructions Filter Series F1. Specifications. PURESTREAM FRL I S F1 0 01/OM PURESTREAM FRL Installation / Operating / Maintenance Instructions Filter Series F1 I S F1 0 01/OM Trouble shooting Trouble Cause Remedy 1. Restricted air flow Filter element

More information

Pneumatic Tubing. A. Polyethylene Fractional Metric. B. Nylon Fractional Metric Mini-Coils

Pneumatic Tubing. A. Polyethylene Fractional Metric. B. Nylon Fractional Metric Mini-Coils A. Polyethylene Fractional Metric B. Nylon Fractional Metric Mini-Coils C. Polyurethane Fractional Metric EZ Strip Bonded Polyurethane Mini Coils D. Ny-Chem Kynar * PVDF Fractional Metric Mini-Coils E.

More information

Transportation Products

Transportation Products Transportation Products Butterfly Valves Hopper Tees Actuators Accessories A Name You ve Trusted for Years... Resilient Seated Butterfly Valves 400 & 480 Series 1 Piece Body Design This economical, resilient

More information

Parker Global Air Preparation System

Parker Global Air Preparation System Parker Global System Parker Global System A complete air preparation system 7 Parker Global System Parker Global Air Preparation System Global. Economical. Modular. Performance you need, wherever you need

More information

Injection Lubricators

Injection Lubricators Injection Lubricators Section Introduction Why Injection Lubrication?...2 Which Kind of Injection Lubricator Do I Need?... 3 In-Line Features...4 Multi-Point Features...5 L50 In-Line Features, Ordering

More information

Notes Air Line Network

Notes Air Line Network Air Line Network 141 Air Line Network Chicago Pneumatic Air Preparation Units are designed to help you get maximum performance from your tools. They ensure minimal pressure drop and thus minimum energy

More information

Valves, Fittings, and Manifolds Catalog. We make things MOVE

Valves, Fittings, and Manifolds Catalog. We make things MOVE Valves, Fittings, and Manifolds Catalog We make things MOVE We Make Things Move A forward-thinking innovator, Bimba provides industry-leading pneumatic, hydraulic and electric motion solutions that are

More information

PF Series Thermoplastic Non-Spill Couplings and Industrial Hose Products

PF Series Thermoplastic Non-Spill Couplings and Industrial Hose Products PF Series Thermoplastic Non-Spill Couplings and for Bulk Chemical and Fluid Transfer Bulletin 3800-PF August, 2004 PF Series Non-Spill Quick Couplings Parker PF Series non-spill couplings virtually eliminate

More information

Pressure Regulators K Series

Pressure Regulators K Series www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators, K Series 2 Swagelok K Series Pressure Regulator

More information

Palm-Style Mini-Orbital Offset Mini-Orbital...55 Angle-Head Mini-Dynorbital...56 Right Angle Mini-Orbital...57 Electric Dynorbital...

Palm-Style Mini-Orbital Offset Mini-Orbital...55 Angle-Head Mini-Dynorbital...56 Right Angle Mini-Orbital...57 Electric Dynorbital... Dynorbital-Spirit...46 HiVac Dynorbital-Spirit...48 Mesh Abrasive Systems...49 Dynorbital Supreme...50 Two-Hand Dynorbital...52 11" Dia. Dynorbital...53 Palm-Style Mini-Orbital...54 7 Offset Mini-Orbital...55

More information

INSTRUCTION AND MAINTENANCE MANUAL FR95 PRESSURE REGULATOR

INSTRUCTION AND MAINTENANCE MANUAL FR95 PRESSURE REGULATOR Enidine / Conoflow 105 Commerce Way Westminster, SC 29693 Tel: (864) 647-9521 Fax: (864) 647-7993 WARNING Conoflow s products are designed and manufactured using materials and workmanship required to meet

More information

Portable Equipment High-Pressure Heavy-Duty Grease Pumps

Portable Equipment High-Pressure Heavy-Duty Grease Pumps High-Pressure Heavy-Duty Grease Pumps 917 346P 987 Series 20 50:1 Air-Operated Double Acting The following models contain Lincoln s high pressure Series 20 grease pumps. Model 917 120 lb. Drum Will dispense

More information

Welcome to Sharpe Manufacturing. Choosing the Proper Gun for Your Application Conventional Air Spray

Welcome to Sharpe Manufacturing. Choosing the Proper Gun for Your Application Conventional Air Spray 2008 Catalog Welcome to Sharpe Manufacturing. Sharpe, a Graco company, manufactures and sells paint spraying equipment and accessories for the professional automotive refinisher. In 2003, Sharpe joined

More information

Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. Pressure Fittings. Other Function Fittings.

Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. Pressure Fittings. Other Function Fittings. Function Fittings Flow Control Regulators Piloted Function Fittings Non-Return Valves Pressure Fittings Other Function Fittings Silencers Function Fittings 4-3 Function Fittings Flow Control Regulators

More information

COMPRESSED AIR WATER DIESEL LUBRICANTS ANTIFREEZE WINDSHIELD WASH GREASE AdBlue

COMPRESSED AIR WATER DIESEL LUBRICANTS ANTIFREEZE WINDSHIELD WASH GREASE AdBlue HOSE REELS HOSE REEL MOUNTING RECOMMENDATIONS........................................ RM-12 DOUBLE PEDESTAL DOUBLE ARM HOSE REELS.................................. RM-12US ULTRA SLIM ENCLOSED HOSE REELS......................................

More information

UV PROCESS SUPPLY, INC. CON-TROL-CURE ½ DIAPHRAGM PUMP INSTRUCTION MANUAL PART # J

UV PROCESS SUPPLY, INC. CON-TROL-CURE ½ DIAPHRAGM PUMP INSTRUCTION MANUAL PART # J 1 IMPORTANT: READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING. PUMP DATA TYPE: MAT'L: WEIGHT: Air Operated Double Diaphragm Polypropylene or PVDF or Acetal PVDF (Polyvinylidene Fluoride)

More information

The Right Tool for Your Tough Job

The Right Tool for Your Tough Job SULLAIR air tools The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications

More information

Model Model Model 3650 Model 3614

Model Model Model 3650 Model 3614 Model 3601 Model 3662 Model 3650 Model 3614 Model 3675 Portable used fluid handling equipment and fuel caddies Collection equipment pressurized (self-evacuating)....... 170 Upright drains.....................................

More information

Page General Purpose Filter Replacement Filter Elements Bowl Assemblies Accessories & Optional Extras

Page General Purpose Filter Replacement Filter Elements Bowl Assemblies Accessories & Optional Extras New Comprehensive Accessory & Maintenance Kit Listing Page.009 General Purpose Filter Replacement Filter Elements Assemblies Accessories & Optional Extras Page.05 Relief Valve Accessories and Optional

More information

Husky 307 Air-Operated Diaphragm Pumps

Husky 307 Air-Operated Diaphragm Pumps INSTRUCTIONS PARTS LIST 308 194 This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE Rev. E Supersedes C and PCN D Husky 307 Air-Operated Diaphragm Pumps 100 psi (7 bar)

More information

Master Pneumatic Detroit, Inc. Micro-Lubrication Specialists. Precision Lubrication Systems for Air Tools, Hoists, and Air Motors

Master Pneumatic Detroit, Inc. Micro-Lubrication Specialists. Precision Lubrication Systems for Air Tools, Hoists, and Air Motors Master Pneumatic Detroit, Inc. Micro-Lubrication Specialists Precision Lubrication Systems for Air Tools, Hoists, and Air Motors Master Pneumatic delivers The critical nature of precision lubrication of

More information

A-4000 Series Oil Removal and Pressure Reducing Stations & Air Compressor Accessories

A-4000 Series Oil Removal and Pressure Reducing Stations & Air Compressor Accessories Pneumatic Air Supply Manual 718 Filter Stations Section Product Bulletin Issue Date 0907 A-4000 Series Oil Removal and Pressure Reducing Stations & Air Compressor Accessories Oil Removal and Pressure Reducing

More information

3 980/980E Ionized Air Gun Instruction Manual

3 980/980E Ionized Air Gun Instruction Manual 3 980/980E Ionized Air Gun Instruction Manual Index Section Page 1. General Description... 3 2. Performance... 3 3. Power Requirements...3 4. Air Supply Requirements... 3 5. Installation...4 6. Assembling

More information

Filters, regulators, and lubricators

Filters, regulators, and lubricators Filters, regulators, and lubricators 28 filters 3/8", 1/2", and 3/4" Ports Technical data Polycarbonate bowl Polycarbonate bowl guard Metal bowl Metal bowl sight glass Filter body Manual drain Auto drain

More information

AFD-280U Parts List AFD-280U. (350 gm) (450 gm) (700 gm)

AFD-280U Parts List AFD-280U. (350 gm) (450 gm) (700 gm) AFD-80U (350 gm) (50 gm) (700 gm) I 0 Major Assemblies, AFD-80U AFD-80U Front View AFD-80U Parts List AFD -80U Front View ITEM P/N DESCRIPTION NO. FUNCTION 036 Hopper Lid Cover for the Fry Hopper. 99 Fry

More information

Air Line Modulars Each component is engineered to connect easily modular FRL assemblies manual shut off

Air Line Modulars Each component is engineered to connect easily modular FRL assemblies manual shut off Air Line Modulars Each component is engineered to connect easily without the use of inserts and special tools. Standard buttonhead screws are used to join components, combined with the new modular design

More information

Inside. Introducing GROZ Air - air control units. Air Regulators 05. Air Lubricators - Metal Bowl 09. Filter Regulator Combination 10.

Inside. Introducing GROZ Air - air control units. Air Regulators 05. Air Lubricators - Metal Bowl 09. Filter Regulator Combination 10. Introducing GROZ Air - air control units ALUMINIUM DIE CAST BODY 01 02 WALL MOUNTING BRACKET FILTER UNIT 05 06 SINTERED BRONZE FILTERING ELEMENT (inside) 03 BUILT IN PIPING ADAPTERS PRESS TYPE MANUAL DRAIN

More information

Pressure Control Valves

Pressure Control Valves CV Catalog HY15-3501/US Contents RELIEF VALVES SEQUEN VALVES Control SERIES CAVITY DESCRIPTION FLOW PRESSURE LPM/GPM BAR/PSI DIRECT ACTING RDH042... C04-2... Direct Acting Relief, Poppet Type... 3.8/1...

More information

HYDROSTATIC TEST SYSTEM MANUAL

HYDROSTATIC TEST SYSTEM MANUAL PDQC HYDROSTATIC TEST SYSTEM MANUAL Technical Specification Operating Instructions Part List Revised 12-2016 Manual # PDQC- 6,000 And PDQC-10,000 1 PDQC PERFORMANCE DATA Model Number Maximum Pressure Volume

More information

OPERATOR S MANUAL Model 60010

OPERATOR S MANUAL Model 60010 OPERATOR S MANUAL Model 60010 10- TON SNAP LOCK PORTA POWER SET W/ WHEELED CASE PROFESSIONAL HYDRAULIC JACKS 1531 W. Mohawk Drive Phone 715-453-9602 Customer Service 800-995-2250 Tomahawk, WI 54487 Fax

More information

patented standards SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE General Catalogue a n d ot h e r p e n di n g

patented standards SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE General Catalogue a n d ot h e r p e n di n g SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE PREVO S1 couplings represent the latest generation of pneumatic connection mechanisms. They provide a fully safe response to the

More information

D-040 PN 16 D-040-C PN 16. Combination Air Valve. Description. Applications. Operation. Main Features

D-040 PN 16 D-040-C PN 16. Combination Air Valve. Description. Applications. Operation. Main Features D00.WTR.CAT.ENG0 D-00 PN 1 Water Supply D-00-C PN 1 Combination Air Valve Description The D-00 series Combination Air Valve has the features of both an air release valve and an air & vacuum valve. The

More information

Compressor Accessories

Compressor Accessories Compressor Accessories Air Requirement Estimating Guide The size of pipes and hoses also contributes to pressure loss in a system. Almost without exception, the single largest pressure loss in a system

More information

Page 1 of 19. Part# /10/2006

Page 1 of 19. Part# /10/2006 Part# 1002733-01 10/10/2006 This manual contains important information concerning the installation and operation of the gun washers listed above. Read manual thoroughly and keep for future reference INSTRUCTIONS

More information

Electric Portable Dry Vacuums

Electric Portable Dry Vacuums Electric Portable Dry Vacuums For use with air tools setup for two-tool operation. A cost-effective solution versus overhead central-vac systems. Quiet operation only 76 db(a). Variable Vacuum Control

More information

3 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO

3 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO Flow Control Valves NPTF NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO Swivel Design: Meter-Out, Meter-In

More information

Accessories. Accessories and Fittings for Air Tools & Connecting Air Tools to an Air Distribution Grid

Accessories. Accessories and Fittings for Air Tools & Connecting Air Tools to an Air Distribution Grid Screwdriving technology Automation Air motors Air tools Accessories Accessories and Fittings for Air Tools & Connecting Air Tools to an Air Distribution Grid We offer a comprehensive programme of equipment

More information

The Right Tool for Your Tough Job

The Right Tool for Your Tough Job SULLAIR air tools The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications

More information

F200 Series. Compressed Air and Gas Filters. Heavy duty cast aluminum housings. Maximum working pressure 250 PSIG. Nine filtration grades

F200 Series. Compressed Air and Gas Filters. Heavy duty cast aluminum housings. Maximum working pressure 250 PSIG. Nine filtration grades F200 Series Compressed Air and Gas s FEATURES Heavy duty cast aluminum housings Maximum working pressure 250 PSIG Nine filtration grades Push on filter elements BENEFITS OF THE F200 SERIES Rugged construction

More information

Breathers: VentGuards Basic protection from moisture and particulate contamination in lubricant and equipment

Breathers: VentGuards Basic protection from moisture and particulate contamination in lubricant and equipment Breathers: VentGuards Basic protection from moisture and particulate contamination in lubricant and equipment Applications: Gearboxes Low-Flow High-Humidity Washdown The Overview Standard Breathers: Typical

More information

DISPLACEMENT PUMP INSTRUCTIONS-PARTS LIST Rev. K. Model , Series A Model , Series B Model , Series A

DISPLACEMENT PUMP INSTRUCTIONS-PARTS LIST Rev. K. Model , Series A Model , Series B Model , Series A INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. DISPLACEMENT PUMP 308190 Rev. K 3000 psi (210 bar) MAXIMUM WORKING PRESSURE Model

More information

NEW! NEW! Series 3100H HVLP AirSpray Gun HVLP 1 Qt. Cup Siphon Fed Guns Air Requirements: PSI

NEW! NEW! Series 3100H HVLP AirSpray Gun HVLP 1 Qt. Cup Siphon Fed Guns Air Requirements: PSI High Transfer Efficiency AQMD Compliant Ultra-Fine Atomization Precision Fan Control Easy-Clean Gun Body Built-In Cheater Valve Series 3100H HVLP AirSpray Gun HVLP 1 Qt. Cup Siphon Fed Guns Air Requirements:

More information

DEADMAN AND WATER CONTROL SYSTEMS

DEADMAN AND WATER CONTROL SYSTEMS DEADMAN AND WATER CONTROLS _ BULLETIN 67 (07/05) DEADMAN AND WATER CONTROL SYSTEMS DEADMAN HANDLE AND CORD DEADMAN CONTROL SYSTEM WATER CONTROL SYSTEM COMBINATION DEADMAN AND WATER CONTROL SYSTEM * * *

More information

ARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS

ARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS ARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS For more than years, Ingersoll Rand ARO has been an industry leader in the design and ARO-Flo Series manufacture of compressors, pneumatic tools, and

More information

Operating instructions Form no safety definitions

Operating instructions Form no safety definitions Operating instructions Form no. 1000437 safety definitions safety symbols are used to identify any action or lack of action that can cause personal injury. Your reading and understanding of these safety

More information

WCI-20 Power-Pak Coldwork Hydraulic Power Supply Rev B

WCI-20 Power-Pak Coldwork Hydraulic Power Supply Rev B WCI-20 Power-Pak Coldwork Hydraulic Power Supply Rev B OM-PS-9303-2 Seattle, Washington WCI-20 Power Pak Manual Table of Contents Section 1 Introduction 1.1 Introduction... 1 1.2 Safety Precautions...

More information