Oil Skimmer Installation
|
|
- Elinor Pitts
- 6 years ago
- Views:
Transcription
1 Haas Technical Documentation Oil Skimmer Installation AD0143 Rev H Applies to machines built from: January, 1989 Scan code to get the latest version of this document Translation Available Oil Skimmer - Installation - Introduction This procedure tells you how to install an Oil Skimmer system. The Oil Skimmer does these functions: automatically removes tramp oil. This decreases bacteria and helps to keep the coolant clean uses tubing that constantly turns in the coolant tank to remove the oil from the coolant. This puts the oil into an external container. starts and stops easily with the toggle switch on the side of the unit. You can also add an electrical timer to automatically start and stop the Oil Skimmer. Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On October 24, /6
2 Caution: When you do maintenance or repair on CNC machines and their components, you must always follow basic safety precautions. This decreases the risk of injury and mechanical damage. Do these steps before you do work in the machine or in the control cabinet: Set the main circuit breaker to the [OFF] position. Use an approved lock with an approved safety tag. Always follow lock-out procedures in accordance to local government rules. After turning off the machine, wait at least 5 minutes before working in the control cabinet, to allow power to dissipate. Wait for the voltage indicator LED on the vector drive to go off completely. Always turn off the main air supply when you work on any part of the pneumatic system. Make sure to rest the spindle head on a block of wood when work is done on a vertical axis. This will prevent any unintended movement that could result in the axis falling. Never alter any safety circuits on the machine. Never change any parameter while in DEBUG mode (Classic Haas Control) and the servos ON. Put the machine in Emergency Stop mode to change any parameters. Never operate the machine in DEBUG mode (Classic Haas Control). You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes. Serious damage to the machine components can result in costly repairs. The service technicians at your Haas Factory Outlet (HFO) have the training and experience, and are certified to do these tasks safely and correctly. The repair and service work performed by your HFO is protected with a limited warranty. Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not fully understand. If you have any doubts about doing a procedure contact your Haas Factory Outlet (HFO) and schedule a service visit. Machine Compatibility You can install the Oil Skimmer on machines that have an external 55-gallon (208 L) or 95-gallon (360 L) coolant tank. The machines in the list below have a hole and a slot in the coolant tank cover for the Oil Skimmer: 1. All machines made after September 1, Mini Mills made after July 1, For all other machines, you must use the Tank Cover Template to make the hole and the slot in the coolant tank cover. For all machines made before October 2014, you must use the Enclosure Apron Template to makes holes in the enclosure apron for the female connector on the 25 FT EXTENSION CABLE [B]. Note: This procedure shows a vertical machine. The installation on lathes and horizontal machines is similar. Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On October 24, /6
3 Parts Included KIT PN: "OIL SKIMMER", COOLANT TANK OIL SKIMMER. QTY: 1 [A] QTY: 1 OIL SKIMMER [B] QTY: 1 25FT 5-15P-ROJ BLCK PVC JCKT CBL 3COND [C] QTY: 1 DECAL, NOTICE GFCI [D] QTY: 6 CBL TIE BLK 14.5 LG NYLON 6.6 [E] QTY: 4 CLAMP, CLAMP 7/16" [F] QTY: 2 CLAMP, PUSH WIRE MOUNT 0.34" [G] QTY: 2 BOLT, PPHS 6-32 X 3/8 Tools Required Drill Drill Bit - 5/32" (0.156") Jigsaw Hole Saw " Templates Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On October 24, /6
4 Tank Cover -Template Use this template to make the hole and the slot in the coolant tank cover. Cut the hole and slot on the left or right side of the cover. Choose the side for your machine that gives you access the Oil Skimmer. On the top of the cover for the coolant tank, measure and mark the dimensions [A] from the front edge and [B] from the side edge of the cover. A " (40.9 cm). B - 5.7" (14.5 cm). Measure and mark these dimensions for the hole: C - 3.5" (8.9 cm). D - 1.5" (3.8 cm). G - 0.5" (1.3 cm). Radius Measure and mark these dimensions for the slot: E - 1.8" (4.6 cm). F - 0.2" (0.5 cm). Cut and de-burr the hole and the slot. Enclosure Apron - Template For all machines made before October 2014, you must use this template to make (3) holes in the enclosure apron for the female connector on the 25 FT EXTENSION CABLE. Choose a location in the apron that is near the Oil Skimmer. Put a mark in the apron [A] for the center of the hole. Measure and mark these dimensions for the holes: B - Ø1.75" (4.4 cm). C " (0.1 cm). D " (2.5 cm). E " (2.3 cm). F " (0.6 cm). G - Ø0.156" (0.4 cm). H " (0.4 cm). Cut and de-burr the (3) holes. Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On October 24, /6
5 Oil Skimmer - Installation STEP 1 Install the OIL SKIMMER [A]. Put the long tab [1] on the OIL SKIMMER [A] into the slot [3] on the cover for the coolant tank. Install the flexible grommet [4] on the hole. Put the tubing and washer [2] into the hole on the coolant tank cover. STEP 2 Attach the female connector on the 25 FT EXTENSION CABLE [B] to the enclosure apron. Use the (2) BOLTS [G]. Apply the DECAL [C] to the enclosure apron. STEP 3 Connect the 25 FT EXTENSION CABLE [B] to the GFCI outlet [1] on the control cabinet. Use the CABLE TIES [D], the CLAMPS [E], and the MOUNTS [F] as necessary to route the cable. Connect the power cable [2] for the Oil Skimmer to the female connector on the 25 FT EXTENSION CABLE [B] in the enclosure apron. Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On October 24, /6
6 STEP 4 Push the toggle switch to start and stop the Oil Skimmer. Note: You can use an electrical timer to stop and start the Oil Skimmer automatically. This kit does not supply the electrical timer. Note: After you install the Oil Skimmer, check it frequently to determine how often you must empty the container [1]. Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On October 24, /6
SL-10/20/30, ST-10/10Y - Motor Coupling - Alignment
Haas Technical Documentation SL-10/20/30, ST-10/10Y - Motor Coupling - Alignment Applies to machines built from: January, 1995 Scan code to get the latest version of this document Translation Available
More informationVMC - Auto Air Gun. VMC - Auto Air Gun - Introduction. Haas Technical Documentation. AD0116 Rev D Applies to machines built from: December, 2013
Haas Technical Documentation VMC - Auto Air Gun AD0116 Rev D Applies to machines built from: December, 2013 Scan code to get the latest version of this document Translation Available VMC - Auto Air Gun
More informationCoolant Refill - Installation
Haas Technical Documentation Coolant Refill - Installation AD0171 Rev I Applies to machines built from: March, 2015 Scan code to get the latest version of this document Translation Available Coolant Refill
More informationVMC - Hydraulic Counterbalance - Replacement
Haas Technical Documentation VMC - Hydraulic Counterbalance - Replacement AD0289 Rev G Applies to machines built from: May, 1995 to May, 2012 Scan code to get the latest version of this document Translation
More informationRotary - TR/TRT/T5C - Installation
Haas Technical Documentation Rotary - TR/TRT/T5C - Installation AD0005 Rev K Applies to machines built from: January, 2007 Scan code to get the latest version of this document Translation Available Rotary
More informationBijur - Mechanical - Oil Pump - (1) Drip Sight Glass - Installation
Haas Technical Documentation Bijur - Mechanical - Oil Pump - (1) Drip Sight Glass - Installation AD0048 Rev F Applies to machines built from: March, 2013 Scan code to get the latest version of this document
More informationVMC - 30/40-Taper - Inline - TRP Single Sensor - Adjustment
Haas Technical Documentation VMC - 30/40-Taper - Inline - TRP Single Sensor - Adjustment Applies to machines built from: January, 1989 Scan code to get the latest version of this document Translation Available
More informationVMC - 30/40 - Taper - Inline - TRP 2 Sensor - Adjustment
Haas Technical Documentation VMC - 30/40 - Taper - Inline - TRP 2 Sensor - Adjustment Applies to machines built from: January, 1989 to November, 2013 Scan code to get the latest version of this document
More informationOverview - Bijur - Mechanical - Spindle Lubrication - Oil Pump
Haas Technical Documentation Overview - Bijur - Mechanical - Spindle Lubrication - Oil Pump Scan code to get the latest version of this document Translation Available The Bijur mechanical oil pump spindle
More informationHaas Hydraulic Power Unit - Troubleshooting Guide
Haas Technical Documentation Haas Hydraulic Power Unit - Troubleshooting Guide Scan code to get the latest version of this document Translation Available A: Haas HPU for most lathes made before 2016. B:
More informationTECHNICAL DOCUMENT. PCNC Mill Enclosure Door Switch Kit. Installation
PCNC Mill Enclosure Door Switch Kit Product Identification: Enclosure Door Switch Kit (PN 35550) Purpose: This document details installation and use of the Enclosure Door Switch Kit on either a PCNC 770
More informationGearbox Oil Pump - Troubleshooting Guide
Haas Technical Documentation Gearbox Oil Pump - Troubleshooting Guide Scan code to get the latest version of this document Translation Available 50-taper spindle: Oil-pump motor [1]. Gearbox [2]. Scavenge
More informationWork Light Kit - Installation - Mini Mill - Toolroom Mill
Work Light Kit - Installation - Mini Mill - Toolroom Mill Revision 1 LAST UPDATED: 01/21/2019 AD0100 Machine Compatibility Depending upon the year the machine was built, it will have either a 6.5" (165
More informationAuger System - Troubleshooting Guide
Haas Technical Documentation Auger System - Troubleshooting Guide Scan code to get the latest version of this document Translation Available 1. Multi Auger 2. Single Auger Electrical Diagram Copyright
More informationPlease read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment.
Please read BOTH these and the General Towing Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed by Blue Ox Dealers
More informationRCA PLUG KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com.
RCA PLUG KIT P/N 2883824 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation
More informationINSTRUCTION, HALDEX PUMP LVS KIT P/N
LIFT CORPORATION Sht. 1 of 11 DSG# M-06-33 Rev. - Date: 12/17/07 INSTRUCTION, HALDEX PUMP LVS KIT P/N 267923-01 MALE BULLET LVS WIRE HARNESS P/N 267924-01 QTY. 1 LOW VOLTAGE SWITCH (LVS MODULE) P/N 906530-01
More informationturning centers Haas Automation Inc. TURNING CENTERS
All New turning centers The New Generation Haas turning centers are the culmination of 15 years of continuous development, and they offer the most performance for the money the best value of any turning
More informationINSTRUCTION, GPT LOW VOLTAGE THERMAL SWITCH (LVTS) INSTALLATION KIT P/N
LIFT CORPORATION Sht. 1 of 9 DSG# M-07-18 Rev. ~ Date: 08/15/08 INSTRUCTION, GPT LOW VOLTAGE THERMAL SWITCH (LVTS) INSTALLATION KIT P/N 282473-01 LOW VOLTAGE THERMAL SWITCH (LVTS) P/N 905291 INSTRUCTION
More informationINSTRUCTION, BMR AUXILIARY CONTROL
LIFT CORPORATION Sht. 1 of 10 DSG# M-16-05 Rev. A Date: 01/16/17 INSTRUCTION, BMR AUXILIARY CONTROL GRAVITY DOWN CONTROL KIT, P/N 297080-11 POWER DOWN CONTROL KIT, P/N 297080-12 ELECTRICAL CONTROL TEE
More informationINSTRUCTION, LVTS KIT, GPTLR KIT P/N
LIFT CORPORATION Sht. 1 of 17 DSG# M-11-27 Rev. - Date: 07/03/12 INSTRUCTION, LVTS KIT, GPTLR KIT P/N 282326-01 LOW VOLTAGE THERMAL SWITCH (LVTS MODULE) P/N 906530-01 QTY. 1 LOW VOLTAGE THERMAL SWITCH
More informationINSTRUCTION, TRAIL CHARGER KIT P/N
LIFT CORPORATION Sht. 1 of 8 DSG# M-05-03 Rev. A Date: 01/20/06 INSTRUCTION, KIT P/N 267370-01 ASSEMBLY P/N 267369-01 FUSE & FUSE HOLDER ASSEMBLY P/N 267376-01 COVER () P/N 267522-01 DC-DC P/N 906484-01
More informationBrake and Tail Light Kit Workman 1100/2100 and Twister Utility Vehicles
Form No. 5-90 Brake and Tail Light Kit Workman 00/00 and Twister Utility Vehicles Part No. 0 6697 Installation Instructions Important Before installing this kit, you must have Wiring kit number 99 79 installed
More informationSPEEDKEY KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 9. GEM e2, e4, e6, el XD
SPEEDKEY KIT P/N 2883054 APPLICATION GEM e2, e4, e6, el XD BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation instructions
More informationStrobe Light Kit. Stainless Steel Hopper Spreaders
Strobe Light Kit Stainless Steel Hopper Spreaders 99494 October 1, 2017 Lit. No. 92945, Rev. 04 PARTS LIST 13 10 3 2 12 1 8 11 7 9 4 BLK RED 6 A B A B YEL YEL 5 99494 Strobe Light Kit Item Part Qty Description
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory S P/N 08E10-TK6-100 Application 2013 FIT Publications No. AII 13198 Issue Date JULY 2012 PARTS LIST Ambient light kit 2 Ambient lights 6 Wire ties Fuse label 2 Grommets
More informationStrobe Light Kit. Poly Hopper Spreaders w/fleet FLEX System
Strobe Light Kit Poly Hopper Spreaders w/fleet FLEX System 99766 September 1, 2016 Lit. No. 99767, Rev. 02 PARTS LIST 8 1 3 4 6 3 5 4 7 6 5 2 7 99766 Strobe Light Kit Item Part Qty Description Item Part
More informationUpgrading the Sure Coat Modular Gun Control System
Instruction Sheet P/N 007365B Upgrading the Sure Coat Modular Gun Control System WARNING: Read the Safety section in the Sure Coat Modular Gun Control System manual before performing any of the following
More informationDETEX Low Energy Automatic Door Operator AO19-1 Single Door - Push
104850 January 31, 2013 Detex Corporation, 302 Detex Drive, New Braunfels, Texas 78130-3045 (830)-629-2900 / 1-800-729-3839 / Fax (830)-620-6711 E-MAIL: detex @ detex.com INTERNET: www.detex.com DETEX
More informationINSTRUCTION, BMR STREET-SIDE CONTROL
LIFT CORPORATION Sht. 1 of 13 DSG# M-16-04 Rev. A Date: 01/13/17 INSTRUCTION, BMR STREET-SIDE CONTROL GRAVITY DOWN CONTROL KIT, P/N 297080-01 POWER DOWN CONTROL KIT, P/N 297080-02 ELECTRICAL CONTROL TEE
More informationPHASE CONVERTERS OPERATING & MAINTENANCE INSTRUCTIONS. MODEL NO: PC40 and PC60. PART Nos:
PHASE CONVERTERS MODEL NO: PC40 and PC60 MODEL PART No: NO: 6012805 PC20 and PC40 6012810 PC60 PART Nos: 6012800 6012805 6012810 OPERATING & MAINTENANCE INSTRUCTIONS 0107 Specifications PC20 PC40 PC60
More informationINSTRUCTIONS, ME2 BACKUP BAR KIT
LIFT CORPORATION Sht. 1 of 8 DSG# M-16-27 Rev. - Date: 12/20/16 INSTRUCTIONS, ME2 BACKUP BAR KIT FORD F-150 KIT P/N 296845-01 FORD F-150 KIT (GALVANIZED) P/N 296845-01G BACKUP BAR, 55-1/2 LG. P/N 296844-01,
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. BII 31129 REARVIEW CAMERA 2006 RL Issue Date OCT 2005 PARTS LIST Attachment Kit P/N: 08B21-SJA-B00 Template Rear camera trim 6-Pin connector
More informationBOSTON TOWER MERCHANDISER ILLUMINATION KIT (P/N ) INSTALLATION INSTRUCTIONS
BOSTON TOWER MERCHANDISER ILLUMINATION KIT (P/N 629097072) INSTALLATION INSTRUCTIONS Release Date: May 12, 2011 Publication Number: 629097072INS Revision Date: March 17, 2014 Revision: D Visit the Cornelius
More informationxtablet T7000 Vehicle Mount Kit
xtablet T7000 Vehicle Mount Kit Installation & Users Guide Last Updated: January 19, 2012 Find the latest updates in the Support section in the MobileDemand website at: www.ruggedtabletpc.com. Questions?
More informationINSTALLATION OF FRONT MOUNTING KIT 2008 FORD F-250/350 4X4 DIESEL (ONLY)
SAFETY PRECAUTIONS INSTALLATION OF FRONT MOUNTING KIT 2008 FORD F-250/350 4X4 DIESEL (ONLY) Bulletin MIO-R29FRXF4X02 Rev B If any installation problems are encountered, please call G&B Specialties for
More informationSAFETY. Read and understand all safety precautions and instructions before installing this product.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More informationStrobe Light Kit. Poly Hopper Spreaders with FLEET FLEX Electrical System
July 15, 2017 Lit. No. 83729, Rev. 00 PARTS LIST Strobe Light Kit Poly Hopper Spreaders with FLEET FLEX Electrical System 1 8 6 7 9 2 BLK RED 5 A B YEL 3 4 83745 Strobe Light Kit Item Part Qty Description
More information850 TETHER SWITCH KIT
850 TETHER SWITCH KIT P/N 2883823 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain
More informationOne-Gun Add-On Kit For Smart-Coat Controllers
Instruction Sheet P/N One-Gun Add-On Kit For Smart-Coat Controllers 1. Introduction This document contains procedures for installing a one-gun add-on kit to your Smart-Coat Controller. For additional information,
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publication No. MII 15249 WINCH MOUNT KIT P/N 08L70-HL3-A41 SXS700/M4/M2 Issue Date September 2015 PARTS LIST No. Description Qty (1) Winch bracket 1 (2)
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. MII 13125 CHROME (PIAA) VT1300CR/CT Issue Date P/N 08V31-MFW-100 VT1300CS February 2010 Honda Dealer: Please give a copy of these instructions
More informationInstructions for Field Retrofit of a Model 98 Temperature Controller in place of a Model 85 Temperature Controller
Introduction: Instructions for Field Retrofit of a Model 98 Temperature Controller in place of a Model 85 Temperature Controller The following is a set of instructions for retrofitting a Model 98 Digital
More informationAUDIO KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com.
AUDIO KIT P/N 2882696 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation
More informationPlease read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment.
Serial Number Manual Transmission Only Please read BOTH these and the General Towing Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are
More informationInstallation Instructions
Installation Instructions Bulletin 1494V Variable Depth, Flange Operated Circuit Breaker Operating Mechanisms For use with Circuit Breakers 140G-G, 140MG-G, 140G-H, 140MG-H, 140G-I, 140MG-I, 140G-J, 140MG-J,
More informationPARTS LIST FOR GEN MKD. Copyright 2012, Mi-T-M Corporation 1
PARTS LIST FOR GEN-6000-0MKD Copyright 2012, Mi-T-M Corporation 1 This Parts Listing has been compiled for your benefit. You can be assured your Mi-T-M Generator was constructed and designed with quality
More informationServo-Conventional Universal Milling Machine
Universal Milling Machine Servo-Conventional Universal Milling Machine Control developed and built in Germany Positioning control for traveling pre-selected paths on all axes Constant cutting speed, whereby
More informationAEROMOTIVE Part # and F-Body Fuel System Kit INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 17101 and 17102 93-97 F-Body Fuel System Kit INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures. We
More informationIL500 Sierra Inclined Platform Lift
IL500 Sierra Inclined Platform Lift Installation & Service Manual www.harmar.com 800-833-0478 IMPORTANT: Read and understand this manual thoroughly before attempting to install or operate the lift. If
More informationPlease read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment.
Serial Number BX1303 Manual Transmission Only Please read BOTH these and the General Towing Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories
More informationAEROMOTIVE Part # Mustang 5.0L Fuel System Kit INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 17103 83-93 Mustang 5.0L Fuel System Kit INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures. We recommend
More information2-row and All-row systems included.
Ag Leader Technology Cotton Picker Installation Installation Instructions for John Deere cotton picker models: 2-row and All-row systems included. IMPORTANT: Ensure the model numbers shown above correspond
More informationAGRI-COVERTM SWITCH CONTROL INSTRUCTIONS
AGRI-COVERTM SWITCH CONTROL INSTRUCTIONS Use these instructions in place of the rocker switch and solenoid sections in your roll tarp or ROLTECTM Electric Hopper Conversion instructions. Some installs
More informationELECTRIC START KIT KIT P/N
ELECTRIC START KIT KIT P/N 2873876 Application 2002 Polaris EDGE Models with 500-600 Domestic Engines Before you begin, read these instructions and check to be sure all parts and tools are accounted for.
More informationINSTALLATION GUIDE INSTALLATION GUIDE
INSTALLATION GUIDE INSTALLATION GUIDE Technical Specifications READ AND SAVE THESE INSTRUCTIONS Check the fan label to make sure it is the correct voltage. Operating voltage Diameter Weight Operating frequency
More informationA-dec 570L Dental Light on a Non-DCS System INSTALLATION GUIDE
A-dec 570L Dental Light on a Non-DCS System INSTALLATION GUIDE Non-DCS LED Dental Light 86.0350.00 Rev B Choose an Installation Guide The manual used to install the light depends on whether the system
More informationAsymmetrical Installation Instructions. Components: i2cove Asymmetrical LED Light Fixtures. 12 [305mm] [918mm] 48.
support@i2systems.com www.i2systems.com Electrical Specifications PARAMETER Input Power VALUE 8 Watts* / Ft Input Voltage 120-277V AC, 50/60 Hz Max. Fixture Run Length LED Color (CCT) 8 Watts: 120VAC:
More informationInstallation Guide. Auxiliary Pressure Control Manifold on 6890 GC Accessory G1570A
Installation Guide Auxiliary Pressure Control Manifold on 6890 GC Accessory G1570A Agilent Technologies 2001 All Rights Reserved. Reproduction, adaptation, or translation without permission is prohibited,
More informationSAFETY. Read and understand all safety precautions and instructions before installing this product.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More informationNON-CONTACT TOOL BREAKAGE DETECTION SYSTEM
NON-CONTACT TOOL BREAKAGE DETECTION SYSTEM The mass production of mechanical parts requires very short machining times. Therefore a tool check, for guaranteeing high quality products with few rejects,
More informationConsists of. Date:17/02/2011 Page 1/8
Consists of 470518 Qty. Product 4 1 DEFA Termina - interior heater with holder 1 1 DEFA Futura - time program controller/timer 3 1 DEFA MultiCharger 1203 - battery charger/relay 6 1 DEFA Extension cable
More informationInstructions for 2-row monitoring only
Installation Instructions for CaseIH cotton picker models: Instructions for 2-row monitoring only CAUTION: Ensure the model numbers shown above correspond to the machine model. If you receive the incorrect
More information2005 Dodge Grand Caravan Installation Instructions
Please read BOTH these and the General Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed by Blue Ox Dealers who
More informationSAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More informationInstructions for 2-row monitoring only
Installation Instructions for CaseIH cotton picker models: Instructions for 2-row monitoring only Ensure the model numbers shown above correspond to the machine model. If you receive the incorrect installation
More informationInstallation Notes. PlayPorTT Kiosk Anti-Tip Safety Cable. (p/n )
May 2010 900410-001 Rev. 01 About This Document This document is intended for: Operators of TouchTunes PlayPorTT wireless game and music systems. TouchTunes Field Service, Customer Support, and Sales personnel.
More informationAutomatic Tool Presetter System Belt-Type Chip Conveyor Spindle Orientation Parts Catcher
Haas ST-10 GR Series CNC Lathe Gantry The High-Performance Router SystemsTurning Center [ S p e c i a l S e r i e s ] 12-station bolt-on style turret Belt-type chip conveyor available 6000-rpm high-speed
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory USB ADAPTER Application 2014 INSIGHT Publications No. AII 50655 Issue Date OCT 2013 PARTS LIST USB Adapter Attachment Kit P/N 08B28-TM8-100A 6 mm Flange nut Control
More informationSETUP, PARTS & MAINTENANCE MANUAL 2 BAG CATCHER
SETUP, PARTS & MAINTENANCE MANUAL 2 BAG CATCHER MODELS: 970338 2 BAG CATCHER, 36 970339 2 BAG CATCHER, 42 970340 2 BAG CATCHER, 48 970341 2 BAG CATCHER, 52 WARNING: If incorrectly used this machine can
More informationSuspension System RS6525 (B)
88525 Rev A Suspension System RS6525 (B) Requires coil spring kit RS80116 (B) or RS80118 (B) for a complete installation Ford Super Duty READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING
More informationINSTALLATION INSTRUCTIONS RDO 2904 POWER DOOR OPERATORS FULL SIZE GMC VAN, REAR KIT # 01240
INSTALLATION INSTRUCTIONS RDO 2904 POWER DOOR OPERATORS FULL SIZE GMC VAN, REAR KIT # 01240 # Be certain that these supplemental instructions are read and understood completely before installation is attempted.
More informationOPERATOR S MANUAL. 20-bu 3-Point Hitch Material Collection System. LP65048 Supplier ST /07/2017 English. North American Edition Printed in USA
OPERATOR S MANUAL 20-bu 3-Point Hitch Material Collection System LP65048 Supplier ST48289 11/07/2017 English North American Edition Printed in USA Introduction Using Your Operator s Manual Read this entire
More informationINSTALLATION INSTRUCTIONS
Accessory Application Publication No. INSTALLATION INSTRUCTIONS WINCH MOUNT P/N 08L73-HL4-F01 After 16 SXS1000M3/M3P/M3LE SXS1000M5P/M5D/M5LE MII 16083 Issue Date February 2017 PARTS LIST No. Description
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS [1] Description: Tow Hitch Wire Harness Kit [2] Application: Nissan Rogue Note: Tow Harness application is limited to specific vehicle option packages that include tow harness
More informationINSTALLATION INSTRUCTIONS TABLE OF CONTENTS
KSAIF0401AAA Wi-Fi Interface Kit for Ductless Systems INSTALLATION INSTRUCTIONS NOTE: Read and become familiar with these instructions before beginning installation. TABLE OF CONTENTS PAGE SAFETY CONSIDERATIONS...
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory HITCH Application 2009 CR-V Publications No. AII 40373 Issue Date AUG 2008 PARTS LIST Plain washer, 12 mm Trailer Hitch Kit P/N 08L92-SWA-100 Trailer hitch 6 Spring
More informationServo-conventional milling machine
Universal Milling Machine Servo-conventional milling machine Control developed and built in Germany Positioning control for traveling pre-selected paths on all axes Constant cutting speed, whereby the
More informationINSTALLATION OF FRONT MOUNTING KIT 2008 FORD F-250/350 4X4
INSTALLATION OF FRONT MOUNTING KIT 2008 FORD F-250/350 4X4 Bulletin MIO-R29FRXF4X01 Rev B SAFETY PRECAUTIONS If any installation problems are encountered, please call G&B Specialties for technical assistance
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. SYSTEM 2005 ACCORD All 27511 (DX, LX) 2-AND 4-DOOR Issue Date AUG 2004 PARTS LIST Security System Attachment (LX): P/N 08E55-SDA-100A Unit
More informationpoollux Power plx-pw60 & plx-pw100
poollux Power plx-pw60 & plx-pw100 ETL LISTED Conforms to UL STD 379; Certifi.ed.to.CSA.STD.C22.2.#218.1 5005508 Installation Instructions Read all instructions before attempting to perform installation
More informationAir Collet Closer - Upgrade - OL-1
LAST UPDATED: 11/26/2018 Air Collet Closer - Upgrade - OL-1 AD0062 Applies to machines built from: May, 2010 Introduction 1 This procedure tells you how to install the Office Lathe air collet closer (ACC)
More informationIMPORTANT ATTENTION INSTALLERS:
Power Exhaust Kit for P7TQ, Q7TQ & R7TQ Series INSTALLATION INSTRUCTIONS IMPORTANT ATTENTION INSTALLERS: It is your responsibility to know this product better than your customer. This includes being able
More informationINSTALLATION AND OPERATING INSTRUCTIONS
ASTRO ENVELOPE FEEDER AMC-2000-5 FOR RYOBI 3302 / ITEK 3985 (2 COLOR) INSTALLATION AND OPERATING INSTRUCTIONS INTRODUCTION Thank you for purchasing the Astro Envelope Feeder. It is fast, efficient, reliable,
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. SYSTEM S2000 AII 26324 Issue Date OCT 2004 PARTS LIST Headrest Speaker System P/N 08A54-S2A-100 3 Small wire ties 2 Headrest speakers 9
More informationDCC-3000 Climate Control for Vintage Air GEN-IV systems
INSTALLATION AND OPERATOR S MANUAL FOR DCC-3000 Climate Control for Vintage Air GEN-IV systems PARTS INCLUDED WITH THIS SYSTEM Vent sensor housings: 2 1 / 2 housings (x2) 2 housings (x2) Installation/operator
More informationFitting Instructions
Reverse Park Assist Suitable for: Isuzu MU-X Kit Part No: / 5466XX D-Max Tow-Pro Wiring Kit Fitting Instructions Suitable for: Isuzu MU-X / D-Max Accessory Kit Estimated Fitting Time: 0 Minutes FI967 Page
More informationINSTALLATION INSTRUCTIONS DODGE DAKOTA 2 KIT # 682 (2WD), 692 (4WD) 3 KIT # 683 (2WD), 693 (4WD)
INSTALLATION INSTRUCTIONS 1997-1999 DODGE DAKOTA 2 KIT # 682 (2WD), 692 (4WD) 3 KIT # 683 (2WD), 693 (4WD) Installation of a Performance Accessories body lift kit will change the vehicle s center of gravity
More informationINSTALLATION INSTRUCTIONS
Accessory Application Publication No. INSTALLATION INSTRUCTIONS WINCH MOUNT KIT P/N 08L77-HL3-A00 SXS700M4/M2 Honda Dealer: Please give a copy of these instructions to your customer. MII 14607 Issue Date
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. BII 39890 2009 MDX Issue Date JULY 2008 PARTS LIST Backup Sensor Attachment Kit P/N 08V67-STX-200A Self-tapping screw, 5 x 16 mm 12 Wire
More informationCopyright EXTRON All rights reserved E-M-EN EXTRONCNC.com
YIH CHUAN MACHINERY INDUSTRY CO., LTD HEADQUARTERS 40755 No.8, 9 Rd., Taichung Industrial Park, Taichung, Taiwan T e l : +886-4-2359-3351 Fa x : +886-4-2359-0012 E-mail : extron@extroncnc.com th YIH CHUAN
More informationPart Name/Description Part Number Quantity Instruction Kit Metalfor Flow Sensor
NOTE: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Instruction Kit Metalfor 4101091 1 Flow Sensor 4001356 1 Deflector plate 2000612-1 1
More informationMODEL G300 BRAKE BLEEDER
MODEL G300 BRAKE BLEEDER Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV120716 P/N: 81-0035H THIS PAGE INTENTIONALLY
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 24664-25319 SYSTEM 2003 CR-V Issue Date MAY 2003 PARTS LIST Security System (sold separately) P/N 08E51-EP4-100 Security System Attachment
More informationTRAVEL'R DIRECT RESPONSE
CAREREE TRAVEL'R DIRECT RESPONSE AUTO-RETRACT SYSTE Read this manual before installing or using this product. ailure to follow the instructions and safety precautions in this manual can result in personal
More informationMSeries. High Rigidity Vertical Machining Centers
MSeries High Rigidity Vertical Machining Centers M Series With 40 years experience of manufacturing machine tools, EXTRON has continuously developed and provided creative machine tools for global customers.
More informationAir Conditioner for M915 A0/A1 Truck
RD-2-4530-0 Air Conditioner for M915 A0/A1 Truck INSTALLATION INSTRUCTIONS Install refrigerant compressor per instructions provided with compressor mount kit. CAUTION: Edges of sheet metal can be sharp!
More informationSAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More informationPAGE DESCRIPTION REF. NO.
TABLE OF CONTENTS PAGE DESCRIPTION REF. NO. - CONTENTS PAGE... CE-077 1 CRANE SAFETY AND HAZARDS... CE-044 2 OPERATING INSTRUCTIONS... CE-039 3 DIMENSIONS AND CAPACITIES... CE-020 4 ASSEMBLY PAGE 1 UNPACKING...
More informationContents Anthony Liftgates, Inc.
Contents Introduction.............................. 2 Safety................................... 3 Safety Is Your Responsibility.................. 3 Nomenclature............................. 4 Platform
More information