Manufacturing Program: LAND APPLICATIONS. Mixed Flow Pump. type TR

Size: px
Start display at page:

Download "Manufacturing Program: LAND APPLICATIONS. Mixed Flow Pump. type TR"

Transcription

1 Mixed Flow Pump type TR

2 Constructional Features Vertical single and multi-stage mixed flow pumps for wet pit installation. Standardised asembly groups: suction, casing, column pipe, discharge bend, rotor and driver support. Optimum adaption to individual installation and working conditions by means of standard dised column lenghts. (sea assembly arrangements). Range of application The mixed flow pump TR is suitable for pumping clean and treated liquids such as: Cooling water pumps For power stations, refineries, industrial and chemical plants. Raw water pumps For irrigation and drainage plants (i.e. water pumping stations, high water pumping stations, irrigation plants, sluice pumpling stations, dry docks). Rain water pumps For sewage plants. Fire pumps For fire pumps installations. Performance range Capacity Q = up to m3/h Head H = up to 150 m Speed n = up to r.p.m..: P. 1 :.

3 TECHNICAL DATA Impeller Semi axial single inlet opened or closed design according to specific speed with helicoidal vanes. Hidraulically balanced by means of holes in the impeller hub. The closed type can be optionally equiped with impeller wear rings. Radial and thrust bearings in the driver pedestal The weight of the pump rotor and the hydraulic thrust is supported by axial antifriction bearing amply dimensioned. Next to this bearing another ball bearing is installed as support to the radial stress in this size of the pump. Both bearing are oil lubricated tilting pad type. Depending on the axial thrust the bearings housing will be supplied with cooling. In normal working conditions the bearings lifetime is at least hours. Plain bearings Pump casing Casing consists of suction bellmouth, and diffusor vane casing, with replaceable casing wear rings. Transmission shaft Designed for working below the first critical velocity. The shafts are conected with the radial bearings and stuffing box, the shafts are protected with sleeves. Shaft sealing is assured by an easily accesible stuffing boxes in the discharge bend. Pump rotor is radially supported by plain bearings located in the pump casing and in the spider between the column piping. Two plain bearing can be applied: a) Grease lubricated bronze bearings b) Water lubricated rubber bearings Coupling Standard three part flexible coupling are installed, with this coupling type pumps and motor can be uncoupled without needing to remove the motor of its emplacement. Driver and direction of rotation The dirve can be obtained equally by means of an electrical motor, turbine or explosion engine. Direction of rotation clockwise when viewed from the driver end..: P. 2 :.

4 RATING CHARTS Executions.: P. 3 :.

5 SECTIONAL DRAWINGS Bronze bearings lubricate by grease. Bearings housing with or without cooling. Thrust roller antifriction bearing..: P. 4 :.

6 SECTIONAL DRAWINGS Rubber bearings lubricated by the pumping medium. Foundation angles. Thrust ball antifriction bearings..: P. 5 :.

7 PART LIST Re f Description Ref. Description Re f Description Re f Description 1 Suction bellmouth 14 Shaft protecting tub 27 O ring 40 Adjusting nuts 2 Casing wear ring 15 Column pipe 28 Stuffing box 41 Theaded ring 3 Impeller nut 16 Shaft sleeve 29 Greaser 42 Bearing cover 4 Impeller 17 Plain bearing 30 Lantern ring 43 Centering bush 5 Casing wear ring 18 Grease tube 31 Packing rings 44 Thrust bearing 6 Diffusor casing 19 Bearing spider 32 Packing gland 45 Bearing housing 7 Adjusting ring 20 Muff coupling 33 Funnel 46 Oil level gauge 8 Radial shaft seal 21 Shaft protecting tub 34 Thrower 47 Oil retainer tube 9 Bearing housing 22 Column pipe 35 Trapezoid belt 48 Radial bearing 10 Plain bearing 23 Angel or ring foundation 36 Grease pump 49 Thower 11 Grease tube 24 Drive shaft 37 Motor stool 50 Cooling coil 12 Shaft sleeve 25 Discharge bend 38 Coupling 13 Pump shaft 26 Shaft sleeve 39 Clamping ring MATERIALS Description Clean water Neutral Slightly abrasive Slightly abrasive Slightly aggressive Sea water Suction bellmouth Diffusor casing Carbon Stainless steel Cast iron Stainless steel Alloy cast iron Bronze Impeller Cast iron Stainless steel Stainless steel Bronze Column pie Carbon steel Carbon steel Cast iron Ni-hard Stainless steel Cast iron Stainless steel Shaft protecting tube Carbon steel Carbon steel Stainless steel Stainless steel Shaft Carbon steel Carbon steel Stainless steel Stainless steel Muff coupling Carbon steel Carbon steel Stainless steel Stainless steel Shaft sleeves Stainless steel Stainless steel Stainless steel Stainless steel Bronze bearings Bronze Bronze Bronze Bronze Rubber bearings Rubber + Phen. resin Rubber + Phen. resin Rubber + Stain. st. Rubber + Stain. st. Lubrication tube Copper Copper Copper Stainless steel Discharge bend Cast iron Cast iron Cast iron Cast iron Screws Carbon steel Carbon steel Carbon steel Stainless steel Packing Graphited cotton O rings Rubber.: P. 6 :.

8 DIMENSIONS Automatic pump, bronze bearing lubrication. Funnues for rubber bearings lubrication. Minimum water level, variable with the hidraulic characteristics. Column lengths according to individual installation. Pump lenghts for one impeller pump, for multicellular pumps multiply for the impeller number..: P. 7 :.

9 DIMENSIONS Type a B C NW De Dg F F1 g1 g2 Hc h L1 K 100/11/ /10/ /11/ /8/ /11/ X /8/ /9/ /10/ /11/ X /11/ /6/ /8/ /9/ /10/ X /5/ /8/ /8/ /5/ /8/ /4/ /5/ /8/ /9/ : P. 8 :.

10 HIDROTECAR, S.A. Factory and Offices Pol. Villayuda - C/ Ribera, s/n BURGOS - SPAIN P.O. Box BURGOS - SPAIN Telf. (947) / 04 / 08 Fax: (947) hidrotecar@hidrotecar.com HIDROTECAR, S.A. Central Branch. C/ Comandante Zorita, 13-4º, Of MADRID - SPAIN Telf. (91) Fax: (91) hidrotecarmadrid@hidrotecar.com.: P. 9 :.

Design Characteristics. Aplicaciones

Design Characteristics. Aplicaciones Design Characteristics Single stage centrifugal. Casing axially split. Double entry impeller. Bearings on both sides of impeller. Suction and discharge branches located in lower casing. Características

More information

Standard SO according to DIN

Standard SO according to DIN Standard SO according to DIN 24.255 DESIGN FEATURES Design Features Horizontal centrifugal, single Stage pump. Spiral volute casing. Overhung on shaft impeller. Grease or oil lubricated antifriction bearing.

More information

SMN Double-Suction Axially Split Pump

SMN Double-Suction Axially Split Pump SMN Double-Suction xially Split Pump motralec 4 rue Lavoisier. Z Lavoisier. 95223 HERBLY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com

More information

XFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump

XFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial

More information

HORIZONTAL SPLIT CASING PUMP

HORIZONTAL SPLIT CASING PUMP HORIZONTAL SPLIT CASING PUMP HORIZONTAL PUMP CONSTRUCTION MBH Horizontal Split Casing Pumps - a new concept for better performance and higher efficiencies. For greater interchangeability and ease of maintenance,

More information

VERTICAL TURBINE PUMP

VERTICAL TURBINE PUMP 21A, Canning Street, Ground Floor, Kolkata 700001, (W.B) India Ph.: (033) 22308125, 39855288, Mob: 09339834915 Fax: (033) 2230 8125, E- mail: powerpointpumps@yahoo.co.in Website: www.powerpointpumps.com

More information

DESIGN FEATURES SPECIAL DESIGN FEATURES. Space Saving. Self Priming. Easy to install. Design Flexibility

DESIGN FEATURES SPECIAL DESIGN FEATURES. Space Saving. Self Priming. Easy to install. Design Flexibility DESIGN FEATURES Space Saving Vertical arrangement saves valuable floor space. Self Prig Designed to operate with submerged impeller. Instantly serviceable. Low operation cost. Easy to install Self- contained

More information

RWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data

RWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data Type series booklet CTI-4900/01 [04-2012] RWCP, RWCN Vertical pumps for tanks for loaded liquids 1. Fields of Application RWCP and RWCN are vertical, centrifugal pumps designed for wells, ditches and tanks.

More information

GENERAL DIMENSIONS OF SMF PUMPS. Capacity upto 7,000 m /hr Head upto 45 m. Range :

GENERAL DIMENSIONS OF SMF PUMPS. Capacity upto 7,000 m /hr Head upto 45 m. Range : Fluid Technology from Holland GENERAL DIMENSIONS OF SMF PUMPS Features : Closed or Semi-open Impeller Different Orientation of Delivery Nozzle. Vertical Execution The SMF series are single-stage centrifugal

More information

Jansen Pompentechniek T: +31(0) E:

Jansen Pompentechniek T: +31(0) E: 1 1 VOGEL - Pumps with Channel Type Impeller, Design KS Capacity up to 500 m 3 /h (2200 USgpm) Head up to 45 m (150 feet) Speed up to 1450 min -1 (1450 r.p.m.) Sizes: DN 65 up to DN 150 (21/2 up to 6 )

More information

CVFV Vertical multistage low pressure pumps

CVFV Vertical multistage low pressure pumps CVFV Vertical multistage lowpressure pumps VERTICAL MULTISTAGE LOWPRESSURE PUMPS CVFV Application Vertical pumps CVFV are intended for pumping drinking and service water or even slightly polluted or turbid

More information

Axial geteilte Spiral-gehӓusepumpen Axial split case pumps ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES

Axial geteilte Spiral-gehӓusepumpen Axial split case pumps ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction RITZ ( ) ASE axial split case pumps has been developed for wide range of application benefiting both the industrial users and the municipality.

More information

MZ, MA. Liquid ring pumps. 3 Design. 1 Fields of application. 4 Designation. 5 Materials. 2 Operating Data

MZ, MA. Liquid ring pumps. 3 Design. 1 Fields of application. 4 Designation. 5 Materials. 2 Operating Data Type series booklet CTI-1700/00 [12-2008] MZ, MA Liquid ring pumps 1 Fields of application Multi-stage, horizontal liquid ring pumps, with self-priming capacity. MZ and MA pumps are used for pumping of

More information

Deep Well Turbine Pump B

Deep Well Turbine Pump B Type Series Booklet Nº A3210.0E / 1 KSB B Deep Well Turbine Pump B 1. Application Deep Well Turbine (DWT) B Pumps are suitable for water supply schemes, irrigation schemes, lowering of ground water level

More information

HORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH

HORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH HORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH HORIZONTAL AXIALLY SPLIT CASING PUMPS Range : Delivery size upto 1220 mm Capacity up to 24,000 m³/hr Head up to 180 meters Applications : Suitable for

More information

MULTISTAGE PUMPS TYPE RKB

MULTISTAGE PUMPS TYPE RKB MULTISTAGE PUMPS TYPE RKB MULTISTAGE PUMPS-TYPE : RKB Description Range : Delivery size upto 250mm Capacity up to 850 m³/hr Head up to 850 m Applications : Sprinkler irrigation, Fire Fighting, Water supply

More information

VOGEL - Sewage Pumps Design KS, Channel Type Pumps Design W, WTS, Vortex Type Pumps

VOGEL - Sewage Pumps Design KS, Channel Type Pumps Design W, WTS, Vortex Type Pumps VOGEL - Sewage Pumps Design KS, Channel Type Pumps Design W, WTS, Vortex Type Pumps VOGEL - Pumps with Channel Type Impeller, Design KS Capacity up to 500 m 3 /h (2200 USgpm) Head up to 45 m (150 feet)

More information

Grupa Powen-Wafapomp SA. Pumps for Power and Heat Supplying Industries catalogue

Grupa Powen-Wafapomp SA. Pumps for Power and Heat Supplying Industries catalogue 0 Grupa Powen-Wafapomp SA Pumps for Power and Heat Supplying Industries 2017 catalogue Contents 2 Basic pumps Supply pumps Z YS 4 10 Condensate pumps K i WK 20 Cooling water pumps D P 26 32 Hot water pumps

More information

High-pressure pumps Series HP49

High-pressure pumps Series HP49 High-pressure pumps Series HP49 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water

More information

AQTV, AQSV, AQCV Vertical axial flow pumps

AQTV, AQSV, AQCV Vertical axial flow pumps AQTV, AQSV, AQCV Vertical axial flow pumps Vertical axial flow pumps AQTV, AQSV, AQCV Vertical pumps AQTV, AQSV, AQCV have axial flow impeller. Considering rate of flow they may be classified as the most

More information

RDLO / RDLO V. Axially Split Volute Casing Pumps. Fields of Application. Bearings. Operating Data. Materials. Design. Shaft Seal. Designation 01 P F

RDLO / RDLO V. Axially Split Volute Casing Pumps. Fields of Application. Bearings. Operating Data. Materials. Design. Shaft Seal. Designation 01 P F Type Series Booklet 1387.5/2--10 RDLO / RDLO V Axially Split Volute Casing Pumps Fields of Application Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems,

More information

Axially split volute casing pumps. Applications. Bearings. Shaft seal. Operating data

Axially split volute casing pumps. Applications. Bearings. Shaft seal. Operating data Type series booklet 1385.52/3--10 RDLV Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting

More information

Side channel pumps ADH/CDH AEH TECHNICAL DATA. Temperature: max. 120 C. PN 40 for AEH

Side channel pumps ADH/CDH AEH TECHNICAL DATA. Temperature: max. 120 C. PN 40 for AEH Side channel pumps ADH/CDH 0801... 2504 AEH 0805... 0808 TECHNICAL DATA Capacity: Head: Speed: max. 7,2 m³/h max. 400 m max. 3000 rpm Temperature: max. 120 C Casing pressure: Shaft sealing: PN 25 for ADH/CDH

More information

multiflow Multistage Heavy Duty Axially

multiflow Multistage Heavy Duty Axially 2 multiflow Multistage Heavy Duty Axially Multistage Heavy Duty Axially Split Casing Centrifugal Pump PERFORMANCE RANGE Capacity Up to 6000m 3 /h Up to 2600gpm Heads Up to 1000m Up to 32810 feet Temperatures

More information

ZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps

ZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps ZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps Main Applications Features and Benefits ZPP and Z22 double suction axially split single stage centrifugal pumps are used for demanding

More information

SMD axially split casing, double suction pump

SMD axially split casing, double suction pump SMD axially split casing, double suction pump Main applications SMD single stage, double suction, axial split casing pumps are designed to meet the needs of the water market for a wide range of raw, clean,

More information

Bearings. Shaft seal. Materials

Bearings. Shaft seal. Materials Type series booklet 1385.51/3--10 RDL Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting

More information

1100 Series Multi-Stage Vertical Turbine Pumps

1100 Series Multi-Stage Vertical Turbine Pumps 1100 Series Multi-Stage Vertical Turbine Pumps Capacities to 40,000 GPM Heads to 1,500 Feet Temperatures to 200 F Water Lubricated Open Lineshaft Vertical Hollow Shaft Motor The vertical hollow shaft motor

More information

Contents. Identification

Contents. Identification Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions

More information

Normpumpen nach DIN EN 733 einschl Standard horizontal pumps to DIN EN 733 NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES

Normpumpen nach DIN EN 733 einschl Standard horizontal pumps to DIN EN 733 NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction Pumps of the Norma J ( ) Series are horizontal volute casing centrifugal end suction pumps with Back Pull-out feature. Principal dimensions

More information

Centrifugal End Suction Fire Pumps

Centrifugal End Suction Fire Pumps Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These

More information

PumPs. jacketed molten sulfur PumPs. Pumps Mixers Strainers Engineered Systems and Controls.

PumPs. jacketed molten sulfur PumPs. Pumps Mixers Strainers Engineered Systems and Controls. Pumps Mixers Strainers Engineered Systems and Controls jacketed molten sulfur PumPs PumPs for molten sulfur and other fluids requiring pumping at controlled temperatures. www.haywardgordon.com introduction

More information

Goulds Medium Capacity, Single Stage, Double Suction Pump

Goulds Medium Capacity, Single Stage, Double Suction Pump Goulds 3409 Medium Capacity, Single Stage, Double Suction Pump 3409 Double Suction Pumps Designed for a Wide Range of Industrial, Marine and Power Generation Services Capacities to 12,000 GPM (2725 m3/h)

More information

PA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.

PA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD. END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,

More information

Vertical multistage centrifugal pumps in ring-section design

Vertical multistage centrifugal pumps in ring-section design Vertical multistage centrifugal pumps in ring-section design Vertical multistage centrifugal pumps in ring-section design PUMP DESIGN Multistage centrifugal pumps in ring-section design, radially split,

More information

High-pressure pumps Series HP45

High-pressure pumps Series HP45 High-pressure pumps Series HP45 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water

More information

General. Shaft Seal. Nozzle Orientations. Field of Application. Design. Drive. Bearings. Product Catalogue

General. Shaft Seal. Nozzle Orientations. Field of Application. Design. Drive. Bearings. Product Catalogue Product Catalogue ETA C and D General The well-known ETA-pump on the bearing bracket C and D is constructed in accordance with DIN 24 255 standard and completes the performance range up to max. 100 m3/hr

More information

SUBMERSIBLE SEWAGE PUMPS TYPE : NS

SUBMERSIBLE SEWAGE PUMPS TYPE : NS SUBMERSIBLE SEWAGE PUMPS TYPE : NS SUBMERSIBLE SEWAGE PUMPS TYPE - NS Range : Delivery size upto300 mm Capacity up to 1800 m³/hr (Max.) Head up to 90 m (Max.) Max. permissible solid size up to 300 mm Applications

More information

SJP Vertical Propeller Pumps

SJP Vertical Propeller Pumps Sulzer Pumps SJP Vertical Propeller Pumps The Heart of Your Process Sulzer Pumps Sulzer Pumps is a world leader in reliable products and innovative pumping solutions. Our advanced research and development,

More information

SILI PUMP, Your reliable one-stop supplier of marine pumps.

SILI PUMP, Your reliable one-stop supplier of marine pumps. SILI PUMP, Your reliable one-stop supplier of marine pumps. Shanghai SILI PUMP Industry Co., Ltd. Add: No.128 Jinyuan Road, 201518, Shanghai, China (Jinyuan Industry Area) Tel: 0086-21-39109967, fax: 0086-21-39109967

More information

INVCP, INVCN. Vertical pumps for tanks. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data

INVCP, INVCN. Vertical pumps for tanks. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data Type series booklet CTI-0300/03 [05-2012] INVCP, INVCN Vertical pumps for tanks 1. Fields of Application INVCP pumps are used for organic and inorganic liquids in water services and different industries.

More information

RSV Series In-Line Vertical Multi-Stage, Ring Section Pump September 2013

RSV Series In-Line Vertical Multi-Stage, Ring Section Pump September 2013 1.0 Overview. The RSV series is Carver s multi-stage pump for water with maximum working pressures below 440 PSI. For other clean liquids please contact Carver Pump Company or your local distributor. The

More information

SJT/SJM CWP Vertical Pump

SJT/SJM CWP Vertical Pump SJT/SJM CWP Vertical Pump Main Applications Non Pull-out Construction SJT/SJM CWP pumps can be used in the following fields: Cooling water pumps in utility and industrial power stations Water supply Irrigation

More information

HYDRO-TITAN. Heavy duty back pullout water & process liquid pumps

HYDRO-TITAN. Heavy duty back pullout water & process liquid pumps HYDRO-TITAN Heavy duty back pullout water & process liquid pumps Positioned for Reliability The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease

More information

KIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM

KIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM KIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM Description Range : Delivery size up to 150 mm Capacity up to 470 m 3 /hr Head up to 180 metres Application : Suitable for Water Works, Circulation

More information

Basic Hydraulic Features. Basic Mechanical Features

Basic Hydraulic Features. Basic Mechanical Features APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered

More information

BEV. Deep well vertical pumps. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data

BEV. Deep well vertical pumps. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data Type series booklet CTI-2000/00 [09-2010] BEV Deep well vertical pumps 1. Fields of Application BEV are vertical multistage centrifugal pumps designed for deep well, ditches and tanks to pump clean liquids

More information

TKL. Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump. Experience In Motion

TKL. Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump. Experience In Motion TKL Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump Experience In Motion 1 The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease

More information

IDROCHEMICAL CENTRIFUGAL PUMPS FOR CHEMICAL SERVICE ACCORDING TO ISO 2858 STANDARDS

IDROCHEMICAL CENTRIFUGAL PUMPS FOR CHEMICAL SERVICE ACCORDING TO ISO 2858 STANDARDS IDROCHEMICAL CENTRIFUGAL PUMPS AND MIXERS NCM Line CENTRIFUGAL PUMPS FOR CHEMICAL SERVICE ACCORDING TO ISO 2858 STANDARDS GENERAL FEATURES The Idrochemical NCM process pumps conform to ISO 2858 dimensional

More information

Ductile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A

Ductile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options

More information

Waterflo WF Series Back pull-out End Suction Centrifugal pump

Waterflo WF Series Back pull-out End Suction Centrifugal pump 08 Waterflo WF AKAY INDUSTRIES AKAY WATERFLO WF SERIES Akay WATERFLO WF Series range fully complies to both performance and dimensional standards to the international Standard DIN 24255 Stuffing Box Standard

More information

Norm-Centrifugal Pumps PN 10

Norm-Centrifugal Pumps PN 10 Norm-Centrifugal Pumps PN 10 Pump dimensions acc. to DIN EN 733 with additional sizes Technical requirements acc. to DIN ISO 9908 Application For pumping pure water, industrial water, sea water, condensate,

More information

N, N4. End-Suction Centrifugal Pumps standardized EN 733

N, N4. End-Suction Centrifugal Pumps standardized EN 733 , Construction Single-stage end-suction centrifugal pumps, with bearing bracket. ominal duty points and main dimensions in accordance with E 7. Back Pull-Out construction, for simple and quick dismantling

More information

Multistage Pumps. Vogel Series P, PVa, MP 300

Multistage Pumps. Vogel Series P, PVa, MP 300 Multistage Pumps Vogel Series P, PVa, MP 300 Technical Data Performance range: m Capacities up to 1800m 3 /h (8800USgpm) m Head up to 300m (1000feet) m Max. speed up to 1750rpm Multistage pumps of series

More information

Goulds 5150/VJC. Vertical Cantilever Bottom Suction Pumps

Goulds 5150/VJC. Vertical Cantilever Bottom Suction Pumps Goulds 5150/VJC Vertical Cantilever Bottom Suction Pumps 5150/VJC Vertical Cantilever Pumps Designed to Handle Corrosive/ Extremely Abrasive Slurries Capacities to 1817 m³/h 8000 GPM Heads to 79 m 260

More information

Non-clogging Pump DBS TECHNICAL DATA. Output: up to 1200 m 3 /h. depending of the pump size and material execution

Non-clogging Pump DBS TECHNICAL DATA. Output: up to 1200 m 3 /h. depending of the pump size and material execution Non-clogging Pump DBS 3216...30040 TECHNICAL DATA Output: up to 1200 m 3 /h Delivery head: up to 100 m Speed: Medium temperature: max. 110 C Casing pressure: Shaft sealing: up to 3600 rpm depending of

More information

Horizontal Double Suction Volute Pump Type CN. Pipe line

Horizontal Double Suction Volute Pump Type CN. Pipe line PUMP Horizontal Double Suction Volute Pump Type APPLICATIONS Buildings Irrigation Water supply Drainage Water circulation Fire fighting Air conditioning Water supply Drainage Waterworks Water intake Booster

More information

APIFLO-M series Series

APIFLO-M series Series APIFLO-M series Series Horizontal Multistage Pump According to API610 Capacity: up to 650m 3 /h (50Hz) up to 780 m 3 /h (60Hz) Head: up to 1200m (50Hz) up to 1728 m (60Hz) Pressure: APIFLO-M: up to 25

More information

KSB RPH-V. Process pumps. 3. Designation. 1. Application. 2. Design. 4. Operating Data. to API 610, 11th edition and ISO 13709

KSB RPH-V. Process pumps. 3. Designation. 1. Application. 2. Design. 4. Operating Data. to API 610, 11th edition and ISO 13709 Type Series Booklet 1316.56/04-EN (A1316.0.2E/8) KSB Process pumps to API 610, 11th edition and ISO 13709 1. Application pumps are mainly used in refineries as well as in chemical and petrochemical plants.

More information

General Catalog. A New Vision for Quality Pumps. General Catalog

General Catalog. A New Vision for Quality Pumps. General Catalog General Catalog A New Vision for Quality Pumps General Catalog 2 Tru20 is committed to only the highest quality pumping products. We produce a tremendous range of water and process pumps in order to serve

More information

SIHI prime - Side Channel Pumps Self-priming, segmental type

SIHI prime - Side Channel Pumps Self-priming, segmental type SIHI prime - Side Channel Pumps Self-priming, segmental type AKH-X 1201 3606 TECHICAL DATA Capacity: Delivery head: Speed: from 0.4 up to 7.5 m³/h from 10 up to 242 m 1450 rpm (max. 1800 rpm) Temperature:

More information

Corbrasion resistant, high performance slurry pumps Designed for solids laden waste water to aggressive slurries

Corbrasion resistant, high performance slurry pumps Designed for solids laden waste water to aggressive slurries Corbrasion resistant, high performance slurry pumps Designed for solids laden waste water to aggressive slurries >> Concentric design cartridge bearing housing >> High efficiency twisted vane impeller

More information

Side Channel Pumps Self-priming, segmental type

Side Channel Pumps Self-priming, segmental type Side Channel Pumps Self-priming, segmental type AKH 1101 6103 Technical data Capacity: from 0,2 up to 35 m³/h Head: from 6 up to 144 m Speed: 1450 rpm (max. 1800 rpm) Temperature: max. 120 C Casing pressure:

More information

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017 SECTION 23 2123 - PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

PTB GLV. Vertical Centrifugal Pump

PTB GLV. Vertical Centrifugal Pump Vertical Centrifugal Pump GLV Application Vertical centrifugal pumps, approved in design and certified, are applied as tank installation pumps in areas with explosion hazard. Equipped with special safety

More information

Regenerative Turbine Pumps

Regenerative Turbine Pumps Bulletin M M Series Regenerative Turbine Pumps Capacities to 8 GPM Heads to Feet MTH M Series Vertical base mount and horizontal pedestal mounted multi-stage regenerative turbine pumps represent the most

More information

Goulds Process Pumps designed for severe corrosive services

Goulds Process Pumps designed for severe corrosive services Process Pumps designed for severe corrosive services Non-metallic vertical sump and process pumps designed for severe corrosive services Capacities to 5000 GPM (11 m3/hr) Heads to 275 feet (85m) Design

More information

Boiler Feed Booster Pump YNK. Type Series Booklet

Boiler Feed Booster Pump YNK. Type Series Booklet YNK Type Series Booklet Legal information/copyright Type Series Booklet YNK All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any

More information

480 Series Vertical Turbine Pumps

480 Series Vertical Turbine Pumps 480 Series Vertical Turbine Pumps Flows to: 85,000+ GPM Heads to: 2500+ Feet Temperatures to: 400 F Compliance to API 610 Standards Upon Request 140 Years of Pump Manufacturing American-Marsh Pumps, one

More information

SM / SMI N N O V A T I O N E F F I C I E N C Y Q U A L I T Y

SM / SMI N N O V A T I O N E F F I C I E N C Y Q U A L I T Y N N O V A T I O N E F F I C I E N C Y Q U A L I T Y SM / SMI Heavy Duty, Axial Split Casing, Multi-Stage, Between Bearings, Horizontal Centrifugal Pipeline Pump, API 610 latest Edition SM / SMI For more

More information

End suction back pull-out pumps for general industry, mining, rural and building services

End suction back pull-out pumps for general industry, mining, rural and building services End suction back pull-out pumps for general industry, mining, rural and building WHY COMPROMISE? The TKL KL-ISO end suction, back pull-out pump range is anything but ordinary it is the result of an intensive

More information

Goulds 3181 High-temperature/Pressure Paper Stock/ Process Pumps

Goulds 3181 High-temperature/Pressure Paper Stock/ Process Pumps High-temperature/Pressure Paper Stock/ Process Pumps Designed to Handle High Temperature and High Pressure Services of the Pulp & Paper Industries Capacities to 13,000 GPM (3000 m 3 /h) Heads to 410 feet

More information

ES-ISO ES-NEW GENERATION BACK PULL-OUT END SUCTION PUMPS

ES-ISO ES-NEW GENERATION BACK PULL-OUT END SUCTION PUMPS ES-ISO ES-NEW GENERATION BACK PULL-OUT END SUCTION PUMPS Conforms to ISO 2858 Conforms to ISO 5199 Optimized for capacity Efficiency as per Hydraulic Institute & Europump Norms Many product variants -

More information

NC State University Design and Construction Guidelines Division 23 Hydronic Pumps

NC State University Design and Construction Guidelines Division 23 Hydronic Pumps 1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal

More information

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS Contents Section 1. General Observations... 2 2. Operation... 4 3. Control During Operation... 5 4. Trouble Shooting... 6 5. Maintenance... 7 Please

More information

Non-clogging Pump DBS TECHNICAL DATA. Output: up to 1200 m 3 /h

Non-clogging Pump DBS TECHNICAL DATA. Output: up to 1200 m 3 /h Non-clogging Pump DBS 3216...30040 TECHNICAL DATA Output: up to 1200 m 3 /h Delivery head: up to 100 m Speed: up to 3600 rpm depending of the pump size and material execution Medium temperature: max. 110

More information

KIRLOSKAR ROMAK PUMP - RMK ISO 2858 / DIN EN / ISO 5199

KIRLOSKAR ROMAK PUMP - RMK ISO 2858 / DIN EN / ISO 5199 KIRLOSKAR ROMAK PUMP - RMK ISO 2858 / DIN EN 22858 / ISO 5199 MAGNETIC DRIVE PUMP TYPE - RMK RANGE Discharge capacity (Q) : 3 Up to 300 m /hr Delivery head (H) : Up to 150 m (at 2900 rpm) Available nominal

More information

HP/GP MULTISTAGE HIGH-PRESSURE PUMPS RING-SECTION DESIGN

HP/GP MULTISTAGE HIGH-PRESSURE PUMPS RING-SECTION DESIGN MULTISTAGE HIGH-PRESSURE PUMPS RING-SECTION DESIGN API 610 / TYPE BB4 HP/GP p As in-line or as back-to-back version p Hydraulically balanced concept regarding application area, efficiency and rotor dynamics

More information

Bristol: A History & Future.

Bristol: A History & Future. Fire Pumps Bristol: A History & Future. In 1971, seven emirates joined forces to create the United Arab Emirates, with the goal of becoming a growing leader on an international scale. The UAE s focus has

More information

340 Series Double Suction Split Case Pumps

340 Series Double Suction Split Case Pumps 340 Series Double Suction Split Case Pumps Flows to: 30,000+ GPM Heads to: 550 Feet Temperatures to: 250 F 140 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in America,

More information

UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE

UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE SERIES 223A, 4223A, 323A, 4323A Page 1302.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable Pump Casings...3 Cutaway View

More information

Goulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps

Goulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps Goulds 3186 Designed to Handle High Temperature and

More information

High Temperature Chemical Process Inline Pumps

High Temperature Chemical Process Inline Pumps Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167

More information

G&L Series MPVN. High Pressure Multi-Stage Pumps. Goulds Pumps. ITT Industries

G&L Series MPVN. High Pressure Multi-Stage Pumps. Goulds Pumps. ITT Industries G&L Series MPVN High Pressure Multi-Stage Pumps www.goulds.com Goulds Pumps ITT Industries A Full Range of Product Features Performance Range: Capacities up to GPM ( m /h) Head up to feet ( m) Maximum

More information

High-Temperature and Pressure Paper Stock / Process Pump

High-Temperature and Pressure Paper Stock / Process Pump 3186 High-Temperature and Pressure Paper Stock / Process Pump 3186 Designed to handle High-Temperature and High-Pressure services of the Pulp & Paper Industries. Capacities to 3000 m³/h (13,000 GPM) Heads

More information

Side channel pump PN 40 SRZ. self-priming, according to DIN EN 734. Technical description

Side channel pump PN 40 SRZ. self-priming, according to DIN EN 734. Technical description Side channel pump PN 0 self-priming, according to DIN EN 7 SRZ Technical description SRZ pumps are self-priming side channel pumps in multistage construction capable of handling aerated liquids. They have

More information

CENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES

CENTRIFUGAL PUMPS SAE ENGINE DRIVE 10 FEATURES FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics

More information

PUMP TYPE Single stage, axially split volute casing pump with double entry radial impeller, for horizontal installation.

PUMP TYPE Single stage, axially split volute casing pump with double entry radial impeller, for horizontal installation. SKD SERIES PRODUCT DESCRIPTION AND TECHNICAL DATA PUMP TYPE Single stage, axially split volute casing pump with double entry radial impeller, for horizontal installation. APPLICATION Water supply systems,

More information

Ultra Heavy Duty Slurry Pump Ultra Heavy Duty Slurry Pump

Ultra Heavy Duty Slurry Pump Ultra Heavy Duty Slurry Pump Ultra Heavy Duty Slurry Pump Ultra Heavy Duty Slurry Pump THE TOTAL SLURRY SOLUTION Product Range The True Ultra Heavy Duty Slurry Pump Warman Ultra Heavy Duty Horizontal Slurry Pumps Designed for the

More information

Vogel - Endsuction Pumps Design LS, LC, LCP

Vogel - Endsuction Pumps Design LS, LC, LCP Vogel Pumpen Vogel - Endsuction Pumps Design LS, LC, LCP 1 VOGEL - Endsuction Pumps, Design LS Performance Range: Capacity up to 4.600 m 3 /h (20.250 USgpm) Head up to 170 m (560 feet) Speed up to 1750

More information

480 Series Vertical Turbine Pumps

480 Series Vertical Turbine Pumps 480 Series Vertical Turbine Pumps Flows to: 300,000 GPM Heads to: 1400+ Feet Temperatures to: 400 F Compliance to API 610 Standards Upon Request 130 Years of Pump Manufacturing American-Marsh Pumps, one

More information

CENTRIFUGAL IMMERSION PUMPS

CENTRIFUGAL IMMERSION PUMPS CENTRIFUGAL IMMERSION PUMPS FLUX CENTRIFUGAL IMMERSION PUMPS QUALITY THAT SETS STANDARDS Manufactured at our main plant, these ranges of immersion pumps are the result of extensive product and process

More information

320 Series Vertical Sump Pumps

320 Series Vertical Sump Pumps 320 Series Vertical Sump Pumps Flows to: 9,200 GPM Heads to: 985 Feet Temperatures to: 400 + F 130 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in America, are pump products

More information

The Thomas Simplicity series of Dredge pumps. simplicity dredge pumps

The Thomas Simplicity series of Dredge pumps. simplicity dredge pumps The Thomas Simplicity series of Dredge pumps simplicity dredge pumps 1 Simplicity dredge pumps Thomas Simplicity Dredge pumps The Thomas Simplicity dredge pump is engineered for your specific operation.

More information

RDLO / RDLO V Type Series Booklet

RDLO / RDLO V Type Series Booklet RDL / RDL V Type Series Booklet Legal information/copyright Type Series Booklet RDL / RDL V All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or

More information

High Pressure Boiler Feed Pump

High Pressure Boiler Feed Pump DG High Pressure Boiler Feed Pump Application Type DG high pressure boiler feed pumps are used for feeding high pressure boiler or pumping high pressure clean water. The temperature of pumped media is

More information

RDLO / RDLO V Type Series Booklet

RDLO / RDLO V Type Series Booklet RDL / RDL V Type Series Booklet Legal information/copyright Type Series Booklet RDL / RDL V All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or

More information

IL-DSIL Range Vertical Single Stage Pumps. Excellent Oil & Gas Solutions

IL-DSIL Range Vertical Single Stage Pumps. Excellent Oil & Gas Solutions IL-DSIL Range Vertical Single Stage Pumps Excellent Oil & Gas Solutions IL-DSIL Range technical data General information The IL and DSIL range pumps are heavy duty process vertical in-line overhung pumps

More information

Volute Casing Pump additional sizes to those of ISO 2858/EN 22858

Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 CBTA 150200...350400 + 2 additional sizes 100160 and 125200 TECHNICAL DATA Output: up to 2200 m 3 /h Delivery head: up to 160 m Speed:

More information

AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS

AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM

More information