Q&A Friction Clutches & Brakes 101 Webinar - Basics for Design Engineers

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Q&A Friction Clutches & Brakes 101 Webinar - Basics for Design Engineers"

Transcription

1 Q&A Friction Clutches & Brakes 101 Webinar - Basics for Design Engineers Q: is it possible to modulate the braking torque of these electromagnetic friction and clutches or do they work on/off only? A: There are other types of Clutches and Brakes that are used for continuous slip or proportional torque to voltage or current. These types include Hysteresis, eddy current and magnetic particle clutches and brakes. We do not have a line of these types. Our Electromagnetic power on friction units do have torque output proportional to voltage however they are normally used on or off only. Q: Hello, do you have any application for military vehicle "spring applied hydraulic released" type parking brakes? A: We do not manufacture Hydraulic or pneumatic spring applied brakes. We do however have designed and supply Electromagnetic Spring applied brakes in Military/Aerospace applications. There is a trend in Military and Aerospace applications to move away from hydraulics and have more electromagnetic actuators and brakes. Hydraulics hoses and pumps are subject to more failures than electromagnetic. Q: On BDNB clutches, what type of tolerance can I expect on mechanical clutches for torques between in-lbs? How uniform is the slip torque in either direction? A: The BDNB units are designed and rated at a minimum torque capacity. They are not designed to slip. Only hold a load. Q: May we send our application questions directly to Deltran, or do you rely on skilled applications people in distributors or reps? A: We have application engineers at the DMAC If the application is more involved they will consult with us.

2 Deltran Friction Clutches and Brakes 101 Webinar Q&A

3 FAQ Q. Are there other voltages available other than 24 or 90VDC? A. Yes, but this would incur an addition charge, so the quantities should warrant a special design. Q. Are there other bore sizes available? A. Yes, but this would incur an addition charge, so the quantities should warrant a special design. Q. What temperature range are the units designed to operate in? A. Room Temperature, continuous duty Temperature rating of coil insulation is Class B standard. Q. Are our units self supporting or do they require ball bearing/sleeve bearing support? A. We supply components and they need support.

4 FAQ Q. Are our Power Off Brakes available with Zero backlash? A. No not standard. Our minimum backlash line would be the SB series (Spline Dive) Q: Can I operate your Electromagnetic Friction clutches and brakes or series Clutches 115 VAC.? A: NO The above mention units operate only with DC. The 115VAC needs to be rectified to DC. Q. What is Burnishing? B-U? A: Our Power on friction clutches and brakes are available Burnished or Unburnished. Burnishing is a process of running the faces in so Out of Box highest torque is achieved. There is no extra charge for burnishing. Running the units in is accomplished by forcing the metal to metal surfaces to slip under controlled conditions at the factory.

5 FAQ Q. If a friction clutch slips and does not drive, can I machine the metal back and regain the proper torque? A. No our standard power on friction clutches and brakes work with metal to metal contact. Need to replace the unit.

6 Q: Have you used clutched Flywheels for torque disturbance rejection on servo motors? A: No not sure what you mean by torque disturbance. We can use a clutch to engage a Flywheel depending on the inertias and speeds. Q: What is the linear repeatability of your products? A: Our products are rotary. Depending on the mechanics and linkage the linier accuracy would vary. Q: Is there minimum required annual revenue in order to ask for a customization? Thank you in advance. A: This depends on what customization is required. We can change leads, plating, and sometimes bores if there is an order pending say for 100 units or so, we would not have the resources available to change 1or 2 units. Q: What predicted life equations are available for dynamic braking? A: In our catalog (page 143) there are formulas for energy absorption. This must be calculated first

Precision Linear Actuators

Precision Linear Actuators www.thomsonlinear.com Precision Linear Actuators Thomson the Choice for Optimized Motion Solutions Often the ideal design solution is not about finding the fastest, sturdiest, most accurate or even the

More information

Pneu-Turn Rotary Actuators

Pneu-Turn Rotary Actuators Pneu-Turn Rotary Actuators Pneu-Turn Actuators 4.3-4.14 Three-Position Pneu-Turn 4.15-4.17 Engineering Specifications/ Application Checklist 4.18-4.21 TURN TO THE BIMBA PNEU-TURN ROTARY ACTUATOR FOR THESE

More information

Linear Motion. Optimized.

Linear Motion. Optimized. Clutches & Brakes Thomson - Linear Motion. Optimized. Linear Motion. Optimized. Often the ideal design solution is not about finding the fastest, sturdiest, most accurate or even the least expensive option.

More information

SFL. Application example. Pneumatic Rotary Actuators Rotor. Weight kg. Axial force N. Sizes 25..

SFL.  Application example. Pneumatic Rotary Actuators Rotor. Weight kg. Axial force N. Sizes 25.. SFL Sizes 25.. 64 Weight 0.09.. 0.71 kg Torque 0.12 Nm.. 3.9 Nm Axial force 10.. 50 N Bending moment 0.1.. 0.5 Nm Application example Sorting unit with SFL rotor to drive the separator switch Rotor SFL

More information

Hydraulic Proportional and Closed Loop System Design

Hydraulic Proportional and Closed Loop System Design Hydraulic Proportional and Closed Loop System Design Neal Hanson Product Manager Industrial Valves and Electrohydraulics 1 Electrohydraulics Contents 1. Electrohydraulic Principles 2. Proportional Valve

More information

Magnetic particle clutches and brakes

Magnetic particle clutches and brakes Accurate torque control with instantaneous engagement! Warner Electric Precision Tork magnetic particle clutches and brakes are unique because of the wide operating torque range available. Torque to current

More information

HYBRID LINEAR ACTUATORS BASICS

HYBRID LINEAR ACTUATORS BASICS HYBRID LINEAR ACTUATORS BASICS TECHNICAL OVERVIEW Converting the rotary motion of a stepping motor into linear motion can be accomplished by several mechanical means, including rack and pinion, belts and

More information

DENISON HYDRAULICS open loop pump controls series P140 A-mod, P260 B-mod service information

DENISON HYDRAULICS open loop pump controls series P140 A-mod, P260 B-mod service information DENISON HYDRAULICS open loop pump controls series P10 A-mod, P260 B-mod service information Publ. S1-AM02-A replaces S1-AM02 01-97 CONTENTS typical characteristics-------------------------------------------------------------------------------

More information

COMBIBOX. Program Schedule. with an energised to engage single sided clutch without brake... COMBIBOX 09

COMBIBOX. Program Schedule. with an energised to engage single sided clutch without brake... COMBIBOX 09 COMBIBOX clutch-brake-combination 10 / 09 / 06 with an energised to engage single sided clutch / brake... COMBIBOX 10 with an energised to engage single sided clutch without brake... COMBIBOX 09 with an

More information

Installation & Operation Manual. Electrak 100 Series / Electromechanical Linear Actuator

Installation & Operation Manual. Electrak 100 Series / Electromechanical Linear Actuator www..c Installation & Operation Manual Electrak 100 Series / Electromechanical Linear Actuator Thomson has many years of experience designing and manufacturing linear actuators for a wide variety of applications

More information

RE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles

RE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles RE 2 970/.99 STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles STAR Tolerance Rings Product Overview Tolerance rings are made of hard, embossed spring steel strip and belong to the class

More information

UM Series UniModule. Pre-assembled, C-face Clutches and Brakes. Original Design Sizes 210 & 215. GEN 2 Design Sizes 50, 100 & 180

UM Series UniModule. Pre-assembled, C-face Clutches and Brakes. Original Design Sizes 210 & 215. GEN 2 Design Sizes 50, 100 & 180 re-assembled, C-face Clutches and Brakes UniModules offer the ultimate in Clutch/ Brake performance and convenience. UniModules offer the same performance as EM s without the assembly required. Completely

More information

ROBATIC ROBA -quick ROBA -takt. Reliable coupling and braking.

ROBATIC ROBA -quick ROBA -takt. Reliable coupling and braking. Reliable coupling and braking Equipment Technology Packaging Machinery Conveyors and Materials Handling Equipment Door drives Indexing tables ROBATIC ROBA -quick ROBA -takt www.mayr.de Electromagnetic

More information

NEW BRAKE DESIGN For C-FACE Motors from NEMA Frame Motors

NEW BRAKE DESIGN For C-FACE Motors from NEMA Frame Motors NEW BRAKE DESIGN For C-FACE Motors from NEMA Frame Motors 70 SERIES DOUBLE C FACE BRAKE The Next Generation in Direct-Acting Brakes DIRECT REPLACEMENT for Stearns 87,700 Series Brakes DINGS TRADITIONAL

More information

White Paper. Electromechanical Actuators in the Automotive Industry Roller screw actuators for weld gun applications

White Paper. Electromechanical Actuators in the Automotive Industry Roller screw actuators for weld gun applications White Paper Electromechanical Actuators in the Automotive Industry Roller screw actuators for weld gun applications Exlar electric roller screw linear actuators, rotary servo motors, and integrated control

More information

Stearns Super-Mod Totally-Enclosed Non-Ventilated (TENV) Modules Featuring

Stearns Super-Mod Totally-Enclosed Non-Ventilated (TENV) Modules Featuring TENV/IP54 Super-Mod Clutch-Brake Modules Imagine a totally-enclosed, nonventilated clutch-brake ready to work right out of the box, requiring no modifications. And at a price competitive with open enclosure

More information

METEOROLOGICAL INSTRUMENTS

METEOROLOGICAL INSTRUMENTS METEOROLOGICAL INSTRUMENTS INSTRUCTIONS WIND SENTRY MODEL 03002-5 R.M. YOUNG COMPANY 2801 AERO PARK DRIVE, TRAVERSE CITY, MICHIGAN 49686, USA TEL: (231) 946-3980 FAX: (231) 946-4772 WEB: www.youngusa.com

More information

Proportional Solenoids

Proportional Solenoids Proportional Solenoids The following electromagnets are examples for proportional solenoids realized in series. Magnetbau Schramme developments are customer-specific. If you are searching for the right

More information

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) Thomson - Linear Motion. Optimized. Application Centers Linear Motion. Optimized. Often the ideal design solution is not about finding the fastest, sturdiest, most accurate or even the least expensive

More information

HKS Short Cup Component. HKS Photo

HKS Short Cup Component. HKS Photo HKS Short Cup Component HKS Photo FEATURES Zero backlash Precise positional accuracy High ratio High torque +/- 5 arc second repeatability LOADING ANALYSIS Normal operating conditions involve momentary

More information

Reaction Torque Sensor

Reaction Torque Sensor Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.

More information

PRS Series Planetary Roller Screws. A Superior Alternative to Hydraulic or Pneumatic Motion Providing 15 times the Life of a Ballscrew

PRS Series Planetary Roller Screws. A Superior Alternative to Hydraulic or Pneumatic Motion Providing 15 times the Life of a Ballscrew PRS Series Planetary Roller Screws A Superior Alternative to Hydraulic or Pneumatic Motion Providing 15 times the Life of a Ballscrew Exlar Roller Screw Advantage Roller Screw Overview A roller screw is

More information

Manual Transmission/Driveline. Final Review

Manual Transmission/Driveline. Final Review Manual Transmission/Driveline Final Review 1. The Pressure Plate is a spring-loaded device that presses the clutch disc against the flywheel. 2. The clutch Release Mechanism allows the driver to disengage

More information

Interface Webinar Wednesday. with Keith Skidmore

Interface Webinar Wednesday. with Keith Skidmore Interface Webinar Wednesday Torque 101 with Keith Skidmore www.interfaceforce.com 480 948 5555 Definitions What is a Torque Transducer? Rotary vs. Reaction Shaft vs. Flange Couplings Floating vs. Fixed

More information

Direct Drive Rotary An Increasingly Attractive Servo Choice

Direct Drive Rotary An Increasingly Attractive Servo Choice Direct Drive Rotary An Increasingly Attractive Servo Choice DDR systems are available in frameless, housed and the newly developed Cartridge motor format. While many engineers are familiar with the basics

More information

Extruded Positioning Stage

Extruded Positioning Stage Extruded Positioning Stage Single-axis stage Turnkey operation Modular aluminum construction with integral brushless linear motor, linear encoder, limit switches, cable carrier, linear bearings and bellows

More information

Linear Slides Pneumatic

Linear Slides Pneumatic Linear Slides Pneumatic Mini DLM Modular Series DLM Series No Adaptor Plates Required! DLM-07M-50-50-P mini linear slide. Shown smaller than actual size. Highly Configurable Modular Automation Exclusive

More information

N-02 MAINTENANCE MECHANIC TRAINING SKILL DEVELOPMENT GUIDE

N-02 MAINTENANCE MECHANIC TRAINING SKILL DEVELOPMENT GUIDE N-02 MAINTENANCE MECHANIC TRAINING SKILL DEVELOPMENT GUIDE Duty N: System Troubleshooting N-02: Troubleshoot Pneumatic System Issued 6/01/98 Task Preview Troubleshoot Pneumatic System The Maintenance Mechanic,

More information

Eddy current Dynamometers

Eddy current Dynamometers Eddy Current Brakes Depliant_2015 Page 1 of 41 Eddy Current Dynamometers from 5 kw to 3200 kw Apicom Eddy Current Dynamometers for all type of engine load test: Steady State load test Transient load test

More information

A superior alternative to hydraulic or pneumatic motion providing 15 times the life of a ball screw. Planetary Roller Screws

A superior alternative to hydraulic or pneumatic motion providing 15 times the life of a ball screw. Planetary Roller Screws A superior alternative to hydraulic or pneumatic motion providing 15 times the life of a ball screw Planetary Roller Screws Exlar Your Linear Motion Experts Exlar Corporation is committed to providing

More information

ATC / ATB Series AT Clutches and Brakes

ATC / ATB Series AT Clutches and Brakes ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole

More information

Electromagnetic clutch-brake combinations INTORQ

Electromagnetic clutch-brake combinations INTORQ Electromagnetic clutch-brake combinations INTORQ 14.800 14.867 7.5 120 Nm setting the standard 2 CBC en 5/2005 Contents Clutch-brake combinations Product information 4 Type code 6 Design selection 8 Overview

More information

SKE. Application example. Pneumatic Swivel Heads Universal Swivel Head. Torque 0.4 Nm Nm. Sizes Weight 0.13 kg.. 1.

SKE. Application example. Pneumatic Swivel Heads Universal Swivel Head. Torque 0.4 Nm Nm. Sizes Weight 0.13 kg.. 1. SKE Sizes 18.. 55 Weight 0.13 kg.. 1.95 kg Axial force 140 N.. 2560 N Torque 0.4 Nm.. 9.0 Nm Bending moment 7.0 Nm.. 128 Nm Application example Robot gripper module for the removal and loading of a variety

More information

ROTARY MODULES. Rotary modules

ROTARY MODULES. Rotary modules Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186

More information

Actuator specifications

Actuator specifications Direct drive actuator compatible type X4000G Series Compatible with large load moment of inertia Compatible function with free driver, actuator, and cable combinations Different options including hollow

More information

DATAFLEX 42/1000 Torque Measuring Shaft Operating/Assembly instructions DATAFLEX

DATAFLEX 42/1000 Torque Measuring Shaft Operating/Assembly instructions DATAFLEX DATAFLEX 4/1000 1 of 1 DATAFLEX Torque measuring shaft type 4/1000 Drawn: 017-01-0 Shg/Koe Replaced for: dated 015-04-13 Verified: 017-01-0 Shg Replaced by: DATAFLEX 4/1000 of 1 DATAFLEX is a maintenance-free

More information

EE6352-ELECTRICAL ENGINEERING AND INSTRUMENTATION UNIT I D.C. MACHINES PART A

EE6352-ELECTRICAL ENGINEERING AND INSTRUMENTATION UNIT I D.C. MACHINES PART A EE6352-ELECTRICAL ENGINEERING AND INSTRUMENTATION 1. What is prime mover? UNIT I D.C. MACHINES PART A The basic source of mechanical power which drives the armature of the generator is called prime mover.

More information

Power-Lock shaft-hub locking devices provide simple and highly secure connections.

Power-Lock shaft-hub locking devices provide simple and highly secure connections. POWER-LOCK Power-Lock shaft-hub locking devices provide simple and highly secure connections. AS Series Multipurpose locking devices available in stainless steel and electroless nickelplated finish, in

More information

Electromagnetic clutches and brakes INTORQ and INTORQ

Electromagnetic clutches and brakes INTORQ and INTORQ Electromagnetic clutches and brakes INTORQ 14.105 and INTORQ 14.115 7.5 480 Nm setting the standard Product information INTORQ electromagnetic clutches and brakes transmit the drive torque or braking torque

More information

UNIT-5 MEASUREMENT OF SPEDD, ACCLERATION AND VIBRATION

UNIT-5 MEASUREMENT OF SPEDD, ACCLERATION AND VIBRATION UNIT-5 MEASUREMENT OF SPEDD, ACCLERATION AND VIBRATION Introduction: Speed is a rate variable defined as the time-rate of motion. Common forms and units of speed measurement include: linear speed expressed

More information

MCV106A. Hydraulic Displacment Control-PV DESCRIPTION FEATURES ORDERING INFORMATION. BLN Issued: March 1991

MCV106A. Hydraulic Displacment Control-PV DESCRIPTION FEATURES ORDERING INFORMATION. BLN Issued: March 1991 DESCRIPTION MCV106A Hydraulic Displacment Control-PV Issued: March 1991 The MCV106A Hydraulic Displacement Control (HDC) is a costeffective hydraulic pump stroke control which uses mechanical feedback

More information

Installation & Operation Manual. Electrak 1 Series / Electromechanical Linear Actuators Limit Switch, & Potentiometer Feedback, and Long Life Models

Installation & Operation Manual. Electrak 1 Series / Electromechanical Linear Actuators Limit Switch, & Potentiometer Feedback, and Long Life Models www..com Installation & Operation Manual Electrak 1 Series / Electromechanical Linear Actuators Limit Switch, & Potentiometer Feedback, and Long Life Models INTRODUCTION Thomson has many years of experience

More information

POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS

POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS Section 4 POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS Use with 5mm PowerGrip GT or Poly Chain GT belts. 2MGT and 3MGT pulleys available on request, please contact Gates customer service. Identification

More information

Ball Rail Systems RE / The Drive & Control Company

Ball Rail Systems RE / The Drive & Control Company Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems

More information

LINEAR MOTION SYSTEMS

LINEAR MOTION SYSTEMS R RECISION NDUSTRIAL OMPONENTS R LINEAR MOTION SYSTEMS User-assembled or Pre-assembled PIC now offers a comprehensive line of linear motion systems. Single sourcing eliminates the need for extensive, expensive

More information

PRECISION BELLOWS COUPLINGS

PRECISION BELLOWS COUPLINGS PRECISION BELLOWS COUPLINGS Bellows couplings are used where precise rotation, high speeds, and dynamic motion must be transmitted. They exhibit zero backlash and a high level of torsional stiffness, offering

More information

Preassembled Clutch/Brake Module

Preassembled Clutch/Brake Module Preassembled Clutch/Brake Module P-273-1-WE 819-0343 Installation Instructions An Altra Industrial Motion Company Contents MountingtoaMotor...3 Mounting to a Reducer.............3 Installing the Base Mount...........4

More information

Uni-directional Continuous Operation. Induction Motors. Page C-21. Three-phase high efficiency induction motors Page C-23

Uni-directional Continuous Operation. Induction Motors. Page C-21. Three-phase high efficiency induction motors Page C-23 Selection Guide By Operating Function By Basic Characteristics Constant Speed Operation Uni-directional Continuous Operation Page C-21 Three-phase high efficiency induction motors Page C-23 Easy Assembly

More information

acme & ball screws actuators linear motion drive components engineering ingenuity

acme & ball screws actuators linear motion drive components engineering ingenuity acme & ball screws actuators linear motion drive components engineering ingenuity w w w. n o o k i n d u s t r i e s. c o m PRECISION LINEAR MOTION In 1969, Joseph H. Nook Jr. founded Nook Industries,

More information

Control System Instrumentation

Control System Instrumentation Control System Instrumentation Feedback control of composition for a stirred-tank blending system. Four components: sensors, controllers, actuators, transmission lines 1 Figure 9.3 A typical process transducer.

More information

Gen 2 Clutch/Brake UniModule UM-50, UM-100, UM-180

Gen 2 Clutch/Brake UniModule UM-50, UM-100, UM-180 Gen 2 Clutch/Brake UniModule UM-50, UM-100, UM-180 P-273-4 819-0528 Installation Instructions Vented Enclosed Version Optional An Altra Industrial Motion Company Contents Mounting to a C-Face Motor........3

More information

Type Type 1001 Transducers. I/P & E/P Transducers

Type Type 1001 Transducers. I/P & E/P Transducers Type 1001 I/P & E/P Description The Type 1001 is a patented family of electropneumatic instruments that is used to reduce a supply pressure to a regulated output pressure which is directly proportional

More information

Valtek Position Pac GENERAL INFORMATION INSTALLATION INSTRUCTIONS OPERATION. Valtek Linear Actuators

Valtek Position Pac GENERAL INFORMATION INSTALLATION INSTRUCTIONS OPERATION. Valtek Linear Actuators Valtek Position Pac GENERAL INFORMATION The following instructions are designed to assist with installing, calibrating and troubleshooting the Valtek Position Pac valve position indicator. Product users

More information

Service & Installation Instructions. An Altra Industrial Motion Company P WE Vented. Enclosed Version Optional

Service & Installation Instructions. An Altra Industrial Motion Company P WE Vented. Enclosed Version Optional Gen 2 Electro-Module EM-50, EM-100, EM-180 Electrically Released Permanent Magnet Brake Module EM-50-20FBB, EM-100-20FBB, EM-180-20FBB EM-50-20FBC, EM-100-20FBC, EM-180-20FBC P-273-5-WE 819-0529 Service

More information

Electro-Module EM-50, EM-100, EM-180, EM-210, EM-215

Electro-Module EM-50, EM-100, EM-180, EM-210, EM-215 Electro-Module EM-50, EM-100, EM-180, EM-210, EM-215 P-213-WE 819-0303 Service & Installation Instructions An Altra Industrial Motion Company Contents Pre-Installation Instructions................2 Installation

More information

Installation Instructions

Installation Instructions Gen 2 Electro-Module EM-50, EM-100, EM-180 Electrically Released Permanent Magnet Brake Module EM-50-20FBB, EM-100-20FBB, EM-180-20FBB EM-50-20FBC, EM-100-20FBC, EM-180-20FBC P-273-5 819-0529 Installation

More information

SS2 Linear / Rotary Smart Valve Positioner

SS2 Linear / Rotary Smart Valve Positioner COTROLS A Division of AT Controls Smart performance with innovative and ever-strong coil drive even under harsh working environments Also available in REMOTE TYPE 316 STAILESS STEEL BODY Smart performance

More information

GEEPLUS. Characteristics & Selection of Voice Coil Motors. Voice Coil Motor Characteristics

GEEPLUS. Characteristics & Selection of Voice Coil Motors. Voice Coil Motor Characteristics Characteristics & Selection of Voice Coil Motors Voice Coil Motor Characteristics Voice Coil Motors are highly controllable electrical actuators suitable for applications needing only limited displacement.

More information

The Straight Story on Linear Actuators

The Straight Story on Linear Actuators The Straight Story on Linear Actuators Linear actuators can be powered by pneumatics, hydraulics, or electric motors. Which is best for your job? Let s find out. Linear actuation is employed everywhere,

More information

Stromag Dessau. safety in motion PRODUCT CATALOGUE. NFF4F-LS Brake. for Slow-Running High Torque Drivelines, in harsh environment

Stromag Dessau. safety in motion PRODUCT CATALOGUE. NFF4F-LS Brake. for Slow-Running High Torque Drivelines, in harsh environment Stromag Dessau safety in motion PRODUCT CATALOGUE NFF4F-LS Brake for Slow-Running High Torque Drivelines, in harsh environment ENGINEERING THAT MOVES THE WORLD Applications Holding brake variations with

More information

Spring Cylinder Rotary Actuator

Spring Cylinder Rotary Actuator Spring Cylinder Rotary Actuator Rotary Actuator Spring Cylinder Rotary Actuators High torque and pneumatic stiffness combine together in the Mascot "Spring cylinder rotary actuator" These characteristics

More information

Highest Performance: SPH Series

Highest Performance: SPH Series Highest Performance: SPH Series The SPH series features helical gearing which brings a whole new level of power and precision to GAM s already extensive portfolio of gear reducer technology. With special

More information

Compliant. Precise. Reliable. FUS Insertion Unit

Compliant. Precise. Reliable. FUS Insertion Unit FUS Compliant. Precise. Reliable. FUS Insertion Unit Symmetrical insertion unit with centric locking and monitoring. Field of Application Assembly tasks with very little play among the parts to be aligned

More information

Controls DEA 3250/6510. Controls are a frequent source of system error and failure.

Controls DEA 3250/6510. Controls are a frequent source of system error and failure. Controls Controls DEA 3250/6510 Controls are a frequent source of system error and failure. Controls - Simplicity in Design Complex controls invariably can be simplified by ergonomic analysis. Controls

More information

Precision Linear Mount

Precision Linear Mount Precision Linear Mount GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the EPL/RPL Series gearboxes to meet your needs. Page 3 provides a list of commonly requested

More information

UNIT I D.C. MACHINES PART A. 3. What are factors on which hysteresis loss? It depends on magnetic flux density, frequency & volume of the material.

UNIT I D.C. MACHINES PART A. 3. What are factors on which hysteresis loss? It depends on magnetic flux density, frequency & volume of the material. EE6352-ELECTRICAL ENGINEERING AND INSTRUMENTATION UNIT I D.C. MACHINES PART A 1. What is prime mover? The basic source of mechanical power which drives the armature of the generator is called prime mover.

More information

HYDROTRAINER-200 Hydraulics - Electro-hydraulics

HYDROTRAINER-200 Hydraulics - Electro-hydraulics HYDROTRAINER-200 Hydraulics - Electro-hydraulics Hydraulics and electro-hydraulics within your reach Why HYDROTRAINER-200? All components included are industrial which guarantees real learning and future

More information

Why Mag Tech Brakes & Clutches are Better n No electricity n No break-away torque n Constant torque independent of shaft (rotor) speed n No contacting

Why Mag Tech Brakes & Clutches are Better n No electricity n No break-away torque n Constant torque independent of shaft (rotor) speed n No contacting Permanent Magnet Hysteresis Brakes & Clutches n Non-electrical n No wearing parts n Precise, permanent tension control TRANSMITTING TORQUE THROUGH AIR AIR Why Mag Tech Brakes & Clutches are Better n No

More information

ZF Friedrichshafen AG Special Driveline Technology. Hysteresis brakes Hysteresis clutches Electronic control unit

ZF Friedrichshafen AG Special Driveline Technology. Hysteresis brakes Hysteresis clutches Electronic control unit ZF Friedrichshafen G Special Driveline Technology Hysteresis brakes Hysteresis clutches Electronic control unit 2 ZF-Servoplan CG Compact Gearbox ZF-Duoplan 2K Two-speed Gearboxes ZF-Ecolift Elevator Gearboxes

More information

HARMONIC GEARHEAD. Features & Benefits Specifications... 53

HARMONIC GEARHEAD. Features & Benefits Specifications... 53 HARMOIC GEARHEAD exen s revolutionary (HG) is the perfect combination of size and precision. Use the integrated with exen s RPS Pinion (HGP) to create a true backlash-free solution from the motor to the

More information

Section Description Page

Section Description Page Table of contents IOM part number: 204107 Rev. A Section Description Page 1.0 INTRODUCTION 5-6 1.1 Description 5 1.2 How it works 5-6 2.0 INSTALLATION 6-7 2.1 Preparation 6-8 2.2 Mounting 7 2.3 Actuating

More information

Industrial Clutch Products

Industrial Clutch Products Industrial Clutch Products MODEL CBA Air or Hydraulically Actuated Combination Clutch-Brakes INDUSTRIAL CLUTCH PRODUCTS 1 Model CBA Air or Hydraulically Actuated Combination Clutch-Brakes PERFORMANCE CHARACTERISTICS

More information

Specification AG150 Eddy Current Dynamometer

Specification AG150 Eddy Current Dynamometer Specification Eddy Current Dynamometer 1.0 INTRODUCTION The Froude Hofmann eddy current dynamometer is rated at 150 kw (200 bhp) and has a maximum operating speed of 8000 rpm. It is one of a range of dynamometers

More information

Rotary Actuators Actuators Three-Position Engineering Specifications/ Application Checklist 4.3-4.15 4.16-4.18 4.19-4.22 Rotary Actuators TURN TO THE BIMBA PNEU-TURN ROTARY ACTUATOR FOR THESE QUALITY FEATURES

More information

PGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.

PGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance. PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight

More information

Super Calendar. Heated rolls

Super Calendar. Heated rolls Application Report Surface Winders are used to roll up material such as wire, paper, film, metals and textiles. The surface winding method applies the driving power to a fixed diameter roll or rolls, on

More information

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings

More information

POSITIONING STAGES AND SYSTEMS

POSITIONING STAGES AND SYSTEMS POSITIONING STAGES AND SYSTEMS DEVELOPING HIGHLY ENGINEERED LINEAR POSITIONING SYSTEMS THAT IMPROVE PRECISION, INCREASE PRODUCTIVITY AND CREATE VALUE FOR CUSTOMERS Linear and Rotary Positioning Stages

More information

Optical Kit Encoder Page 1 of 8. Description. Mechanical Drawing. Features

Optical Kit Encoder Page 1 of 8. Description. Mechanical Drawing. Features Description Page 1 of 8 The E3 is a high resolution rotary encoder with a rugged glass-filled polymer enclosure, which utilizes either a 5-pin locking or standard connector. This optical incremental encoder

More information

COMBISTOP NEW. Spring applied brakes

COMBISTOP NEW. Spring applied brakes COMBISTOP NEW Spring applied brakes With manufacturing sites on three continents and a global sales network KEB ensures worldwide availability and support of the KEB COMBISTOP 38. This latest generation

More information

Crane Control Class 5010

Crane Control Class 5010 WB F s and Rectifiers Catalog CONTENTS Descriptions....................................................Page DC Magnetic Drum s General Information................................................. 14 Pricing

More information

Inner block. Grease nipple. Fig.1 Structure of LM Guide Actuator Model KR

Inner block. Grease nipple. Fig.1 Structure of LM Guide Actuator Model KR LM Guide ctuator Model LM Guide + all Screw = Integral-structure ctuator Stopper Housing all screw Inner block Grease nipple Outer rail earing (supported side) Housing Stopper Double-row ball circuit earing

More information

8 BK brakes. 8.1 Description of BK brakes (CMP40 to CMP63) Description of BK brakes (CMP40 to CMP63)

8 BK brakes. 8.1 Description of BK brakes (CMP40 to CMP63) Description of BK brakes (CMP40 to CMP63) 8 BK brakes Description of BK brakes (CMP0 to CMP6) 8 BK brakes 8. Description of BK brakes (CMP0 to CMP6) The mechanical brake is a holding brake implemented as a permanent magnet brake. The standard

More information

Caliper Disc Brakes. Description H-1. Technical Data and Selection Procedure H DP100 Caliper H-4. HC3 and HD3 Calipers H-7

Caliper Disc Brakes. Description H-1. Technical Data and Selection Procedure H DP100 Caliper H-4. HC3 and HD3 Calipers H-7 Eaton Corporation Airflex Division 9919 Clinton Road Cleveland, Ohio 44144-1077 Caliper Disc Brakes H Phone (216) 281-2211 Fax: (216) 281-3890 Description H-1 Technical Data and Selection Procedure H-2

More information

Phys102 Lecture 20/21 Electromagnetic Induction and Faraday s Law

Phys102 Lecture 20/21 Electromagnetic Induction and Faraday s Law Phys102 Lecture 20/21 Electromagnetic Induction and Faraday s Law Key Points Induced EMF Faraday s Law of Induction; Lenz s Law References SFU Ed: 29-1,2,3,4,5,6. 6 th Ed: 21-1,2,3,4,5,6,7. Induced EMF

More information

Electrically Released Brakes

Electrically Released Brakes ER Series Electrically Released Brakes Specifications Inertia lb.ft. Weight lbs. Total Model Bore Size Voltage DC Static Torque lb. ft. Max. RPM Drive Arm. & Carrier Hub Arm. & Carrier Hub Weight lbs.

More information

Extruded Positioning Stage

Extruded Positioning Stage Sold by Servo Systems Co. 53 Green Pond Road, Suite #2 Rockaway, NJ 07866 Toll Free: (800) 922-1103 Phone: (973) 335-1007 Fax: (973) 335-1661 www.servosystems.com Extruded Positioning Stage The Extruded

More information

Moniteur INSTALLATION & OPERATING INSTRUCTIONS. SERIES 40 Positioners. Installation and Operating Instructions Series 40 Positioners.

Moniteur INSTALLATION & OPERATING INSTRUCTIONS. SERIES 40 Positioners. Installation and Operating Instructions Series 40 Positioners. INSTALLATION & OPERATING INSTRUCTIONS SERIES 40 Positioners Form IO2-0406 Description of Device Moniteur's Series 40 pneumatic (3-15psi) and electropneumatic (4-20mA) positioners are advanced control devices

More information

Parallel long travel pneumatic gripper

Parallel long travel pneumatic gripper Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated

More information

Highest Precision: Dyna Series

Highest Precision: Dyna Series Highest Precision: Dyna Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page 3 provides a list of commonly requested

More information

ROTARY MOTION CONTROL

ROTARY MOTION CONTROL ROTARY MOTION ONTROL Technical Data Sheet Mechanical Torque Limiter The trend in industry is to design and incorporate more automation into production processes. Machines are becoming more accurate, requiring

More information

NOW INTEGRATED WITH MLM DESIGNED FOR VAV DIFFUSER SYSTEMS LINEAR CHARACTERISTICS NO REGULAR MAINTENANCE REQUIRED PRESSURE SENSOR AND CONTROLLERS

NOW INTEGRATED WITH MLM DESIGNED FOR VAV DIFFUSER SYSTEMS LINEAR CHARACTERISTICS NO REGULAR MAINTENANCE REQUIRED PRESSURE SENSOR AND CONTROLLERS PRESSURE CONTROL DAMPER 20 PCD NOW INTEGRATED WITH MLM DESIGNED FOR VAV DIFFUSER SYSTEMS LINEAR CHARACTERISTICS LOW NOISE ELECTRIC ACTUATION NO REGULAR MAINTENANCE REQUIRED PRESSURE SENSOR AND CONTROLLERS

More information

LINEAR MOTION CONTROL

LINEAR MOTION CONTROL LINEAR MOTION CONTROL Technical Data Sheet Rod Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these

More information

MAGTROL. WB/PB 115 Series Eddy-Current and Powder Dynamometers. WB/PB 115 Data Sheet. Features. Description. Applications

MAGTROL. WB/PB 115 Series Eddy-Current and Powder Dynamometers. WB/PB 115 Data Sheet. Features. Description. Applications MAGTROL WB/PB 5 Data Sheet WB/PB 5 Series Eddy-Current and Powder Dynamometers Features 4 Models with Maximum from 50 N m to 200 N m (36 lb ft to 47 lb ft) Braking Power: 5 kw to 30 kw Stable Braking,

More information

ALR-190-Series Integral Actuator

ALR-190-Series Integral Actuator ALR-190-Series Integral Actuator Introduction The ALR-190 Series Integral Actuator is designed to mount integral to various injection Pumps of small engines. No external linkage or brackets are required

More information

Altra Industrial Motion. AquaMaKKs Water Cooled Clutches and Brakes with Composite Water Jackets

Altra Industrial Motion. AquaMaKKs Water Cooled Clutches and Brakes with Composite Water Jackets Altra Industrial Motion AquaMaKKs Water Cooled Clutches and Brakes with Composite Water Jackets AquaMaKKs Water Cooled Clutches and Brakes AquaMaKKs water cooled clutches and brakes are designed to provide

More information

Pneumatic or Servo-based System Design Considerations

Pneumatic or Servo-based System Design Considerations Pneumatic or Servo-based System Design Considerations Lee Stephens, Systems Engineer Danaher Motion Wood Dale, IL www.danahermotion.com ContactUs@DanaherMotion.com 866-993-2624 The actuation of cams, detents,

More information

Rack & Pinion Pneumatic Actuators SPRING RETURN DOUBLE ACTING

Rack & Pinion Pneumatic Actuators SPRING RETURN DOUBLE ACTING Rack & Pinion Pneumatic Actuators SPRING RETURN DOUBLE ACTING Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing

More information

Operation and Maintenance manual. fusible shunt trip switch

Operation and Maintenance manual. fusible shunt trip switch Operation and Maintenance manual fusible shunt trip switch Table of Contents Fusible Shunt Trip Switch Device Overview... 2 Installation Instructions... 3 Catalog Number Selection Table... 4 Motor Fuse

More information