Vehicle Application Guide... Key2GO... Installation Wiring Diagram... Optional T-Harness... Wiring Reference Charts...

Size: px
Start display at page:

Download "Vehicle Application Guide... Key2GO... Installation Wiring Diagram... Optional T-Harness... Wiring Reference Charts..."

Transcription

1 Platform: DBALL/DBALL Rev.: Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Data doorlock integration and immobilizer bypass for select Push-to-Start (PTS) Nissan and Infiniti models. Easy Installation available with optional Plug-and-Play T-Harness THNISS. No underhood relay required! GG Get In and Go is designed to provide users with easy takeover when entering their Push-to-Start (PTS) equipped vehicle once it has been remote started. For more information, see the Quick Reference Guide (QRG) at the end of this guide. KeyGO is required for this firmware. Index Vehicle Application Guide... KeyGO... Installation Wiring Diagram... Optional T-Harness... Wiring Reference Charts... Programming Module Programming... Module Reset & Hard Reset... Feature & Option List... Feature Programming... LED Diagnostics & Troubleshooting... Limited One-Year Consumer Warranty... Quick Reference Guide Infiniti & Nissan are registered trademarks and property of their respective companies. 05 Directed. All rights reserved.

2 Platform: DBALL/DBALL Vehicle Application Guide Rev.: Page The table below lists the vehicles and features which are compatible with this product. Refer to the following pages for more information on installation wiring, programming and troubleshooting for these vehicles. Vehicles Infiniti Door Lock Type (see Feature & Option List) PK-Immobilizer Bypass-Data No Key Req'd AV-Parking Lights Control DL-Arm Factory Security DL-Disarm Factory Security DL-Door Lock Control DL-Door Unlock DL-Driver Priority Unlock M5h (Smart Key) Off D D M7 (Smart Key) D D M56 (Smart Key) D D QX56 (Smart Key) D D Nissan Cube (Smart Key) D D JUKE (Smart Key) D D D JUKE (Smart Key) D D Quest (Smart Key) D D Sentra (Smart Key) D D Legend: D: Data-to-Data (DD) only AV: Horn & Lights Controls RS: Remote Start & Engine Controls : DD and WW DL: OE Door Lock & Alarm Controls SS: Integrated Security & Monitoring FOB: Sync CAN Interface w/ FOB Remote PK: Transponder & Immobilizer Override DL-Sliding Door Control Driver DL-Sliding Door Control Passenger DL-Trunk / Hatch Release EIPS FOB-Control of aftermarket alarm with OEM remote KeyGO PK-Push To Start Ignition Compatible ST: Function/Feature Status RS-Tach / RPM Output SS-Entry Monitoring ALL Door Pins SS-Entry Monitoring Driver Door Pin SS-Entry Monitoring Hood Pin SS-Entry Monitoring Trunk/Hatch Pin ST-Brake Status (foot brake) ST-Hand Brake Status ST-Ignition Status ST-Keysense Status When armed, the aftermarket alarm (if available) will sound if the trunk is opened using the OEM passive entry request button near the trunk. To avoid this, open the trunk using the OEM fob button, aftermarket transmitter or SmartStart application. Alternately, you can disarm the aftermarket alarm before opening the trunk. 05 Directed. All rights reserved.

3 Platform: DBALL/DBALL Rev.: Page This feature is required if only one key is available, the installation will remain the same as the two-key method, for programming refer to page 9. KeyGO has been designed and developed to bypass the advanced encryption layers found in modern vehicles. It uses an array of servers to generate a duplicate of the original key, allowing the installation of a remote starter without having to give up a key. The advantage is that this feature allows you to use one original key and the server, as a proxy for the second key, can be used to configure the bypass in the vehicle. KEY prevents the hassle of having to ask the customer for two keys. It also keeps this valued customer in the store and focused on the product. All KeyGO-compatible firmware are clearly indicated in the function list of each vehicle search result page and will also appear on the flash page. Any first-time user must re-register to gain access to KeyGO, and some additional information will be required to complete the registration process, such as your Directed account number and store name. KeyGO is compatible with XpressVIP.5 or higher and requires an XKLoader. KeyGO & KEY Programming Note: Version.5 or higher of XpressVIP must be installed on your computer to complete this programming sequence. Refer to page 9 of this guide for instructions on how to program features using KeyGO. 05 Directed. All rights reserved.

4 Platform: DBALL/DBALL Wiring Diagram (+) Brake wire See Vehicle Wiring Reference Chart for wire location. FRONT and BACK Clutch Switch See Vehicle Wiring Reference Chart for wire location. OR Automatic Transmission only (+) V (-) Hood Status Input (+) Ignition Output (+) Brake Input [] (AC) Tach Input (-) Door/Trunk Status Input (-) E-Brake Status Input (+) Starter Output a 0 (-) Starter Output Remote Starter Rev.: Page (-) Ground (-) Ground (+) V (+) V (-) Lock Output (-) Unlock Output (-) Trunk Output (-) Aux Right Sliding Door (-) Aux Left Sliding Door (+) Parking Light Output (+) Starter Output (-) GWR (Status) (-) Lock, (-) Unlock wires & Parking Light Clutch Pedal Front Clutch Switch See Vehicle Wiring Reference Chart for wire location. Lock, Unlock and Parking Light wires must be connected if the door lock and OEM alarm are not controlled by data. See feature 5 & 6 in Feature and Option List section. Clutch: Pin CUT Back Clutch Switch Manual Transmission only Diagnostic connector OBDII (connector side view) HS CAN High: Pin HS CAN Low: Pin HS CAN High: Tan/Black: HS CAN Low: Tan: Data (Vehicle side): Yellow: 8 Data (Key port side): Orange/Yellow: 9 Clutch Relay: Orange/Red: 0 Clutch Relay: Yellow/Red: (+) V (+) V: Red: (-) Ground (-) Ground: Black: (-) E-Brake Status Output: Black/White: See Veh. Wir. Ref. Chart (-) Push-To-Start: Green/Black: (-) Door/Trunk Status Output: Green/White: See Veh. Wir. Ref. Chart (-) RAP Off Output: Red/Black: [] (AC) Tach Output: Violet/White: 5 (+) Brake Output: Gray: 6 (+) Ignition Status Input: Purple/Green: 8 (+) Ignition Status Output: Purple/Brown: 9 Clock: Yellow/Black: 0 Data: Orange/Black: (-) Hood Status: Blue/Red: NATS Antenna (located behind Push-to-Start button) RF Prog. Button LED DBALL/ DBALL 0 0: Blue/White: (-) GWR (Status) Input 8: Violet: (+) Starter Input 7: Pink/White: (+) Parking Light Input 5: Violet/Black: (-) Aux Input : White/Violet: (-) Aux Input : Red/White: (-) Trunk Input : Blue: (-) Unlock Input : Green: (-) Lock Input (+) V RX (-) Ground TX XKDD65 CUT Data Clock See Vehicle Wiring Reference Chart for wire location. Not required in DD mode. [] Tach wire is an optional connection required on some remote starters, which do not support a tach signal in DD. With the exception of the OBDII Diagnotistic plug, all connectors are displayed from the wire side. 05 Directed. All rights reserved.

5 Platform: DBALL/DBALL Optional T-Harness Installation must be performed in DD (Data-to-Data). FRONT and BACK Clutch Switch See Vehicle Wiring Reference Chart for wire location. Clutch OR Back Clutch Switch Front Clutch Switch (+) V CUT a Clutch Relay Input: White/Brown, pin 0 (+) V Clutch Relay N.C.: Orange/Red, pin Clutch Relay Common: Yellow/Red, pin a 0 (+) Ignition Input (+) Starter Output (-) Starter Output Starter Remote (-) Ground (+) V (-) Lock Output (-) Unlock Output (+) Parking Light Output (-) Ground (+) V Rev.: See Vehicle Wiring Reference Chart. Page 5 (-) Lock, (-) Unlock wires & Parking Light Lock, Unlock and Parking Light wires must be connected if the door lock and OEM alarm are not controlled by data. See feature 5 & 6 in Feature and Option List section. Clutch Relay Output: White, pin Manual Transmission only NOT USED T-0 T-0 Do not use in a standard installation. Use the toggle switch supplied with the remote starter for a working Remote Start Safety Override Switch. White/Black N.C. T-0 T-0 Clock & Data Wire at NATS (located behind Push-to-Start button) See Vehicle Wiring Reference Chart for wire location. See Vehicle Wiring Reference Chart Automatic Transmission only [] (-) Unlock Output: Black/White: (-) Push-To-Start: Green/Black: [] (-) Lock Output: Green/White: (-) Door Pin Output: Red/Black: (+) Ignition Status Input: Purple/Green: 8 (+) Ignition Status Output: Purple/Brown: 9 B-0 B-0 RF Prog. Button LED DBALL/ DBALL 0 Remote Start Safety Override Switch (+) V RX (-) Ground TX XKDD65 Blue Lt. Green Red Violet NOT USED T-Harness THNISS CUT Diagnostic OBDII Brake Switch Brake Pedal (connector side view) T-Harness [] These wires are optional connections only required if features OEM Security Disarm on Data & Door Lock Control On Data are disabled. See Feature & Option List section. 05 Directed. All rights reserved.

6 Platform: DBALL/DBALL Vehicle Wiring Reference Charts Rev.: Page 6 Vehicle PTS NATS Antenna BCM Black 5 Pin Power Window Main Switch Fuse Box White 0 Pin Brake connector PTS Wire Pin Clock Pin Data Pin Driver Door Pin Pin Lock Pin Unlock Pin Parking Lights (+) Pin Brake Wire Pin M5 Hybrid (Smart Key) 0 Brown Pink Green Lt Green 7 Brown 5 Gray 6 Red 8B Purple M7 (Smart Key) 00-0 Brown Pink Green Lt Green 7 Red 5 Green 6 Red 8B Purple M56 (Smart Key) 00-0 Brown Pink Green Lt Green 7 Red 5 Green 6 Red 8B Purple QX56 (Smart Key) 0-0 Lt Blue Pink Lt Green/Red Gray/Red 7 Red White 6 Blue/Orange 8B Red Quest (with Power Sliding Door) 0-0 Purple Red White Green 7 Pink Gray 6 Red/Blue 8B Lt Green Push-to-Start connector Push-to-Start (-) NATS Antenna Clock Data Driver Door Pin (-) Lock (-) BCM Black 5-pin connector Unlock (-) Power Window Main Switch Unlock (-) Lock (-) Brake Wire (+) B B Parking Lights (+) B B 0B 9B 8B 7B 6B 5B Fusebox White 0-pin connector Note: Only required if the feature "Parking Light" is disabled. See Feature & Option List Brake connector Vehicle Quest (w/o Power Sliding Door) 0-0 PTS NATS Antenna BCM Black 5 Pin BCM Black 0 Pin Fuse Box White 0 Pin Brake connector PTS Wire Pin Clock Pin Data Pin Driver Door Pin Pin Lock Pin Unlock Pin Parking Lights (+) Pin Brake Wire Pin Purple Red White Green 7 Yellow 8 White 7 Red/Blue 8B Lt Green Push-to-Start connector NATS Antenna Driver Door Pin (-) Lock (-) Unlock (-) Push-to-Start (-) Clock Data BCM Black 5-pin connector BCM Black 0-pin connector Note: Only required if the feature "Parking Light" is disabled. See Feature & Option List B B Parking Lights (+) B B 0B 9B 8B 7B 6B 5B Fusebox White 0-pin connector Brake connector Brake Wire (+) Vehicle PTS NATS Antenna BCM White 5 Pin BCM Black 0 Pin Driver Kick White 6 Pin Brake PTS Wire Pin Clock Pin Data Pin Driver Door Pin Pin Lock Pin Unlock Pin Parking Lights (+) Pin Brake Wire Pin Cube (Smart Key) Blue/Orange 8 Pink/Blue Lt Green Brown/Yellow 7 White/Black 8 White/Red 7 Red/Blue 8 White Push-to-Start connector Push-to-Start (-) NATS Antenna Clock Data Driver Door Pin (-) BCM White 5-pin connector Note: Only required if the feature "Parking Light" is disabled. See Feature & Option List BCM Black 0-pin connector Driver Kick White 6 Pin 9 Lock (-) Unlock (-) Parking Lights (+) Brake connector Brake Wire (+) 05 Directed. All rights reserved.

7 Platform: DBALL/DBALL Rev.: Page 7 Vehicle PTS NATS Antenna BCM Black 5 Pin BCM Black 0 Pin Passenger Kick White 6 Pin Brake Front Clutch Back Clutch PTS Wire Pin Clock Pin Data Pin Driver Door Pin Pin Lock Pin Unlock Pin Parking Lights (+) Pin Brake Wire Pin Clutch Wire Pin Clutch Wire Pin Juke (Smart Key) Lt Green 8 Pink Lt Green Lt Blue 7 Red 8 Blue 7 Purple Lt Blue Brown Gray 00-0 Push-to-Start connector Push-to-Start (-) OR Front or Back Clutch Switch NATS Antenna Clock Data Driver Door Pin (-) BCM Black 5-pin connector Note: Only required if the feature "Parking Light" is disabled. See Feature & Option List BCM Black 0-pin connector Passenger Kick White 6 Pin Lock (-) Unlock (-) Parking Lights (+) Brake connector Brake Wire (+) Vehicle Sentra (Smart Key) 0 PTS NATS Antenna BCM Black 5 Pin BCM Black 0 Pin Passenger Kick White 6 Pin Brake Front Clutch Back Clutch PTS Wire Pin Clock Pin Data Pin Driver Door Pin Pin Lock Pin Unlock Pin Parking Lights (+) Pin Brake Wire Pin Clutch Wire Pin Clutch Wire Pin Lt Green 8 Pink Lt Green Yellow 7 Purple 8 Blue 7 Purple 5 Lt Blue Brown Gray Push-to-Start connector Push-to-Start (-) OR NATS Antenna Clock Data Driver Door Pin (-) BCM Black 5-pin connector Note: Only required if the feature "Parking Light" is disabled. See Feature & Option List BCM Black 0-pin connector Passenger Kick White 6 Pin Lock (-) Unlock (-) Parking Lights (+) Brake connector Brake Wire (+) Front or Back Clutch Switch 05 Directed. All rights reserved.

8 Platform: DBALL/DBALL Module Programming Rev.: Page 8 Refer to the LED Diagnostics section for more information and for troubleshooting purposes. Important Make all the required connections to the vehicle, as described in the wiring diagram(s) found in this guide, and double check to ensure everything is correct prior to moving onto the next step. Warning! To take advantage of advanced features, you must use XpressVIP.5 or higher. Using version.9 or. will limit available functions and features.. Connect the interface module to your computer using the XKLoader.. Open an Internet Explorer browser (version 6 or higher), and go to The detail of the platform and firmware that is currently saved on the interface module will be indicated in the top left corner of the page.. Select the year, make and model of the vehicle; the page will refresh to display the compatible firmware.. In the search result page, select Flash Standard install, and follow the instructions provided on the screen. 5. Once you have configured your options, click on the FLASH button to upload the firmware onto the interface module. 6. The following message will be displayed when the upload is completed: The flashing is successfully completed. You may now unplug the kit. You can now proceed with the programming instructions below. DD Installation If required for your installation, connect the 0-pin, -pin and -pin harnesses to the module, then connect the -pin DD harness. th st DD 0-pin rd nd -pin -pin OR WW Installation If required for your installation, connect the 0-pin and -pin harnesses to the module, then connect the -pin harness to the module. st DD 0-pin rd nd -pin -pin Wait until the LED turns ON solid red. Note: To skip the transponder programming and use convenience features only, press the programming button 5 times. Solid Ensure that every keyfob except one is located a minimum of 0 feet ( meters) away from the vehicle BEFORE proceeding with the programming sequence. Press the unlock button on OEM keyfob, the LED flashes orange. Press Unlock & Flashes This step is required for programming only. Remove the backup key from the transmitter. Open the transmitter, remove the battery and reassamble. REMOVE THE KEY REMOVE BATTERY CR 0 V Place and hold the keyfob in front of PTS button. Hold the keyfob in front of PTS button for steps 6 to 8. Place keyfob in front of PTS button 05 Directed. All rights reserved.

9 Platform: DBALL/DBALL Rev.: Page 9 5 Push the PTS button twice to turn ON ignition and wait for the key light to flash. Push x 6 Press the brake pedal until the LED starts flashing orange slowly then release the pedal. Brake pedal Press & Flashes slowly & Brake pedal Release 7 Push the PTS button once to turn the ignition OFF. Push x 8 Unplug your DBALL then connect it to XpressKit.com. Follow the KeyGO steps of the programming. KeyGO Programming Remove the DBALL from the vehicle and reconnect it to your computer. The XpressKit web site will automatically recognize that you are moving onto the second phase of the programming sequence. Select the method and click on Submit KeyGO Request. Once the configuration is completed, reconnect the DBALL to the vehicle. The LED flashes once orange, and then turns ON solid green for seconds. Solid x secs & Off You have successfully completed the module programming sequence. 05 Directed. All rights reserved.

10 Platform: DBALL/DBALL Module Reset Rev.: Page 0 A module reset will only erase programming performed in the previous steps. All settings (firmware) and settings flashed to the module using the web config tool will not be affected. OR DD Installation If required for your installation, connect the 0-pin, -pin & -pin harnesses to the module. Press and hold the programming button, then connect the -pin DD harness. WW Installation If required for your installation, connect the 0-pin & -pin harnesses to the module. Press and hold the programming button, then connect the -pin harness to the module. th 5 st st DD 0-pin DD 0-pin rd nd th nd th rd -pin -pin -pin -pin Wait seconds until the LED turns ON solid orange then release the programming button. The LED then turns ON solid red. & & Solid Release Solid Hard Reset Warning Against Executing a Hard Reset! A hard reset will revert the flashed firmware back to its default settings. Depending on the installation, some settings (such as RFTD and DD options) may have to be reconfigured. See the Feature & Option List section of this guide. OR DD Installation If required for your installation, connect the 0-pin, -pin & -pin harnesses to the module. Press and hold the programming button, then connect the -pin DD harness. WW Installation If required for your installation, connect the 0-pin & -pin harnesses to the module. Press and hold the programming button, then connect the -pin harness to the module. th 5 st st DD 0-pin DD 0-pin rd nd th nd th rd -pin -pin -pin -pin Wait seconds until the LED turns ON solid orange, and wait 0 more seconds until the LED starts to flash orange and red. Solid & Flashes Release the programming button. The LED turns ON solid red. Release & Solid 05 Directed. All rights reserved.

11 Platform: DBALL/DBALL Feature and Option List Rev.: Page It is recommended to configure all the features and options listed below using the configuration tool found on the module flashing page on The web offers more options; however, manual configuration of the features is possible using the information on this page. * Default Option ** We've noticed that some North American vehicles need to be set to type Door Lock Control to work properly. Feat. Operation Flashes / Options Description Trunk 5 RFTD Output Type Aux Aux Automatic Controlled Door Lock. No RF Output* Module is connected to a remote starter using a standard installation.. RFTD Output Module is connected to an XL0 using an RSR or RXT installation (when available).. SmartStart Module is connected to SmartStart using an RSR or RXT installation (when available).. Trunk release* It will activate the trunk.. Left Sliding Door It will activate the left sliding door.. Right Sliding Door It will activate the right sliding door.. Right Sliding Door* It will activate the right sliding door.. Left Sliding Door It will activate the left sliding door.. Trunk release It will activate the trunk.. Left Sliding Door* It will activate the left sliding door.. Right Sliding Door It will activate the right sliding door.. Trunk release It will activate the trunk.. Disabled* The vehicle doors will not lock automatically. The vehicle doors will lock when ignition is turned ON and unlock when ignition is. Ignition OFF. The vehicle doors will lock when the brake pedal is applied and unlock when ignition is. Brake OFF.. Speed The vehicle doors will lock when speed is sensed and unlock when ignition is OFF. The OEM alarm will not be controlled by DBALL upon remote start. No disarm or arm. Disabled command will be executed at the beginning or end of the sequence; it must be controlled by the Remote Starter. Smart OEM Alarm Control will behave like a standard Safelock feature on a remote. Safelock starter. It will unlock at the beginning of the sequence, and relock after start and shutdown. 6 Smart OEM Alarm Control. Enabled* Smart OEM Alarm Control will synchronize with the OEM alarm so that it will disarm and rearm the vehicle in the remote start sequence, only when required. The reason for this is, factory alarm control must often be done by lock or unlock operation. This could create unnecessary actions on door lock modules, such as the horn to honk. When possible, Smart OEM Alarm Control will monitor the alarm and door lock status to detect if the disarm or rearm is required. If the vehicle is unlocked or is not equipped with factory alarm, the disarm/rearm will not be executed. Smart OEM Alarm Control will also monitor the remote starter actions so that the factory alarm control is not done twice. A remote starter, for which the Safelock feature is active, will work perfectly with this option and will make it invisible to the user Parking Light Control On Data OEM Security Disarm On Data Door Lock Control On Data. Disabled The remote starter parking lights wire must be connected in the car.. Enabled* The parking lights will be controlled by CAN wires.. Disabled The vehicle is not equipped with an OEM alarm. This feature must be enabled when the vehicle is equipped with an OEM security. Enabled* alarm. The alarm original to the vehicle is disarmed using the bypass and Push-to- Start (PTS) button.. Disabled The remote starter door lock wires must be connected in the car.. Enabled - Type Works for most European vehicles.**. Enabled - Type Works for most North American vehicles.** 05 Directed. All rights reserved.

12 Platform: DBALL/DBALL Rev.: Feature Programming To enter feature programming routine - Turn the ignition ON, then OFF. - Within 5 seconds, press and HOLD the programming button until the LED turns ON orange (after seconds). Release the Programming button. - The LED will flash green once slowly to indicate the feature number is. After a short delay, the LED flashes red rapidly to indicate the current option of feature (i.e. x green followed by x red indicates feature is set to option ). The flashing sequence will repeat until a new command is entered. Changing feature options - Press the lock/arm or unlock/disarm button on aftermarket transmitter to change the option of the selected feature. - The LED flashes red rapidly the number of times equal to the current option number. After a short delay, the LED flashes green slowly the number of times to indicate the current feature. The flashing sequence will repeat until a new command is entered. Accessing another feature - Press and release the programming button a number of times to advance from the current feature to the next desired feature. - The LED flashes green slowly the number of times equal to the feature number. After a short delay, the LED flashes red rapidly to indicate the current option of the current feature. The flashing sequence will repeat until a new command is entered. When the maximum number of features or options is reached, the LED will start flashing again from the first feature or option. Once a feature is programmed - Other features can be programmed. - The feature programming can be exited. Programming Button Exiting feature programming - No activity for 0 seconds; after 0 seconds, the LED will turn ON orange for seconds to confirm the end of the programming sequence. OR - Press and HOLD the programming button for seconds. After seconds, the LED will turn ON orange for seconds to confirm the end of the programming sequence. Page 05 Directed. All rights reserved.

13 Platform: DBALL/DBALL LED Diagnostics and Troubleshooting Rev.: Page LED Description Troubleshooting Comment Module programming Solid red Flashes red Waiting to begin the programming sequence. Skipped CAN Make sure that all the connections are correct (see wiring diagram) Normal operation Flashes orange CAN Bus Detected Normal operation Flashes orange Ready for KeyGO slowly Solid green x Module was successfully secs programmed. Solid orange x Module was successfully secs programmed without bypass External module synchronization OBDII feature not supported. (Flashes red, red, then orange) x 0 Shutdown codes Normal operation Normal operation Normal operation Diagnostic data bus not detected. Some features are not supported by SmartStart. This can be caused by missing wire connections or module hardware limitation. Refer to the wiring installation section to check the connections. Flashes red x Run safe shutdown. Flashes red x Brake shutdown. Used to check the installation and for troubleshooting purposes. Used to check for internal safety operation. Does not represent an error. Flashes red x No key detected shutdown. Active ground while running (status) Flashes green GROUND OUT ON (GWR) command received. Solid red, then flashes orange IGNITION ON command received. Flashes green quickly START ON command received. DD and WW commands Flashes orange x Flashes orange x Flashes orange x Flashes orange x Flashes orange x 5 LOCK command received. UNLOCK command received. TRUNK command received. AUX command received. AUX command received. Otherwise, the Ground While Running (status) signal was lost or was never received by the module. Otherwise, the ignition signal was not received by the module. Otherwise, the start signal was not received by the module. If the bypass module fails to flash, it means the module did not receive the signal. Commands can come from RF, DD or WW. In a WW install, it will show only if the ignition input wire is used. Commands can come from RF, DD or WW. 05 Directed. All rights reserved.

14 Platform: DBALL/DBALL Limited One Year Consumer Warranty Rev.: Page For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. ( DIRECTED ) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the Part ), which proves to be defective in workmanship or material under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer s name, address, telephone number, the authorized licensed dealer s name and complete product and Part description. This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defect in materials or construction. TO THE MAXIMUM EXTENT ALLOWED BY LAW, EXCEPT AS STATED ABOVE, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NONINFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE, OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS, AND DIRECTED HEREBY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT, DAMAGE, OR VANDALISM. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER S PURCHASE PRICE OF THE PART. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED S OPTION THE PART AS DESCRIBED ABOVE. This warranty only covers Parts sold within the United States of America and Canada. Parts sold outside of the United States of America or Canada are sold AS-IS and shall have NO WARRANTY, express or implied. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part. For further details relating to warranty information of Directed products, please visit the support section of DIRECTED s website at: This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any consequential damages sustained in connection with the part(s) installation. The manufacturer and it s distributors will not, nor will they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data bus interface part(s) other than its replacement. N.B.: Under no circumstances shall the manufacturer and distributors of this product be liable for consequential damages sustained in connection with this product and neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than the replacement of this product only. Protected by U.S. Patents: 5,79,55; 6,0,60 B *; 6,,00 B; 6,9,6 B; 6,75,7 B; 6,97,7 B; 6,6,876 B; 6,9,5 B; 6,59, B; 6,696,97 B; 6,756,885 B; 6,756,886 B; 6,77,67 B; 6,8,89 B; 6,9,750 B; 7,00,0 B; 7,05,80 B; 7,0,86 B; 7,06,6 B; 7,06,7 B; 7,068,5 B; 7,05,679 B; Cdn. Patent:,0,8;,,99;,5,0;,5,0;,5,07;,5,08;,5,0;,0,97;,6,670;,5,089; European Patent:,05,8; Pat. Pending:,9,06. Made in Canada. 05 Directed. All rights reserved.

15 Quick Reference Guide DBALL/DBALL-NISSHT Vehicle Takeover with Get In and Go* Press the remote start button on the transmitter to start the vehicle.** Press Unlock Press the Unlock button on the factory button on or aftermarket remote.** either remote** Enter the vehicle by opening and closing the driver door, while making sure the key is inside with you. You can now press the brake pedal, put the car in gear and drive off. Ready to drive off Press remote start button** * Get In and Go connections required. ** Your aftermarket remote may differ from the model shown in the illustrations. GG OR Enter vehicle with key fob Pit Stop Mode The Pit Stop Mode feature is practical when you need to stop and run an errand, but wish to keep the engine running. Stop the vehicle in a safe parking spot and put the gear in Park (P). Press the button to remote start the vehicle.* The parking lights will flash once to indicate the vehicle is now in Pit Stop Mode. It is now safe to leave the engine running and exit the vehicle with the Smart Key in hand. Note: We recommend that you always lock the doors of your vehicle when leaving it unattended. * Your aftermarket remote may differ from the model shown in the illustrations. & P Stop & put vehicle in Park (P) Press remote start button* Exit vehicle with Smart Key Get In and Go GG Get In and Go is designed to provide users with easy takeover when entering their Push-to-Start (PTS) equipped vehicle, once it has been remote started. Typically, users would have to remote start their vehicle, then get inside and press the vehicle start button to perform a takeover. There is therefore a physical action required to drive away. With Get In and Go technology, you simply remote start the vehicle, get in and go... Nothing to do but put the gear in drive and enjoy your vehicle. This unique feature monitors a variety of parameters such as the key fob, vehicle speed sensor and door sensor, in order to perform takeover securily. 05 Directed. All rights reserved.

16 Quick Reference Guide DBALL/DBALL-NISSHT List of Available Commands Notes Note that the information below is for Viper, Clifford and Python models. Icons and commands may differ depending on the remote brand and model purchased. Refer to your authorized installation center for more information. Button(s) Actions Press & hold for second to lock. Press & hold for second to unlock. Press & hold for second to remote start. Press & hold for 5 seconds to activate the trunk release (optional). x + x + x + x + Press time, then to activate the right sliding door (optional).* Press times, then to activate the left sliding door (optional).* Press times, then to activate the panic mode. Press once, then to reset the remote starter runtime. * This output is configurable. see your authorized installation center for more information. 05 Directed. All rights reserved.

Vehicle Application Guide... Installation Type 1... Type 2... Type 3... Wiring Reference Charts...

Vehicle Application Guide... Installation Type 1... Type 2... Type 3... Wiring Reference Charts... Platform: DBALL/DBALL Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation

More information

Installation Guide. Index. Vehicle Canbus Integration System

Installation Guide. Index. Vehicle Canbus Integration System Platform: CANMAX00 Rev.: 20003 Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product.

More information

The HYUNDAI4 firmware for DBALL2 is an all-in-one door lock and override module compatible with. Vehicle Application Guide...

The HYUNDAI4 firmware for DBALL2 is an all-in-one door lock and override module compatible with. Vehicle Application Guide... Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The HYUNDAI4

More information

Door lock and key interface compatible with the latest Kia vehicles. The available features include brake, hood, trunk and door trigger sensors.

Door lock and key interface compatible with the latest Kia vehicles. The available features include brake, hood, trunk and door trigger sensors. Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

The SUBARU1 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Subaru vehicles.

The SUBARU1 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Subaru vehicles. Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The SUBARU

More information

NISSAN 370Z INTELLI-KEY Rev.:

NISSAN 370Z INTELLI-KEY Rev.: Remote Starter NISSAN 70Z 009-00 INTELLI-KEY Rev.: 0096 009 Not included: x Fuse 5Amp x s Amp x Relays Override OEM Transponder Immobilizer Via Data (No Key Required). Interfaces directly with the latest

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission.

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

NISSAN MAXIMA INTELLI-KEY Rev.:

NISSAN MAXIMA INTELLI-KEY Rev.: Remote Starter NISSAN MAXIMA 2009-2011 INTELLI-KEY Rev.: 20091126 20110921 Not included: 1x Fuse 15Amp 3x s 3x Relays Override OEM Transponder Immobilizer Via Data (No Key Required). Interfaces directly

More information

Platform: XK09 Firmware: DLHO4

Platform: XK09 Firmware: DLHO4 DL doorlock INTERFACE Upgradable Door Lock Alarm Interface Downloadable Firmware for Platform XK09: DLPKGM, DLGM5X, CHRYSLER, PLXR, PKN3, DLVW1, DLHO4, DLHO5, DLHY, DLKIA1, DLKIA2, DLCH2, DLCH3, DLCH4.

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide...

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide... Platform: DBALL Rev.: 058 Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product.

More information

The TL4 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Toyota and Lexus vehicles.

The TL4 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Toyota and Lexus vehicles. Rev.: 0700 Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission.

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

The NISS3HT firmware for DBALL2 is an all-in-one door lock and override module compatible with. Vehicle Application Guide...02

The NISS3HT firmware for DBALL2 is an all-in-one door lock and override module compatible with. Vehicle Application Guide...02 Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The NISS3HT

More information

The TL1 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific TOYOTA and LEXUS vehicles.

The TL1 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific TOYOTA and LEXUS vehicles. Platform: DBALL Firmware: TL Rev.: 005 Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission.

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

Platform: XK09 Firmware: DLVW1

Platform: XK09 Firmware: DLVW1 DL doorlock INTERFACE Upgradable Door Lock Alarm Interface Downloadable Firmware for Platform XK09: DLPKGM, DLGM5X, CHRYSLER, PLXR, PKN3, DLVW1, DLHO4, DLHO5, DLHY, DLKIA1, DLKIA2, DLCH2, DLCH3, DLCH4.

More information

Vehicle Application Guide... Key2GO... Installation Without T-Harness... With T-Harness THCHD3...

Vehicle Application Guide... Key2GO... Installation Without T-Harness... With T-Harness THCHD3... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

Warranty Compatibility vehicle chart Bootloading CANMAX Installation (overview) Installation TYPE A...

Warranty Compatibility vehicle chart Bootloading CANMAX Installation (overview) Installation TYPE A... Page 1 to 12 Update Alert: Firmware updates are posted to the web on a regular basis. We recommend you check for firmware and/or install guide updates prior to installation of this product. INDEX Warranty...

More information

Vehicle Application Guide... Wiring Diagram... Wiring Connection Reference Chart... LED Diagnostics and Troubleshooting... Reset the module...

Vehicle Application Guide... Wiring Diagram... Wiring Connection Reference Chart... LED Diagnostics and Troubleshooting... Reset the module... Door Lock Alarm Interface Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product.

More information

INSTALLATION GUIDE Chevrolet Impala GM Designed by Installers for Installers

INSTALLATION GUIDE Chevrolet Impala GM Designed by Installers for Installers INSTALLATION GUIDE DB3 2001 Chevrolet Impala - 403.GM2 4.04 Designed by Installers for Installers 2016 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide...

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide... Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

Door lock and transponder interface compatible with first generation Chrysler, Dodge and Jeep vehicles. Vehicle Application Guide...

Door lock and transponder interface compatible with first generation Chrysler, Dodge and Jeep vehicles. Vehicle Application Guide... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

Vehicle Application Guide... Key2GO...

Vehicle Application Guide... Key2GO... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

This module can only be flashed and configured using XpressVIP at or using the Directechs

This module can only be flashed and configured using XpressVIP at   or using the Directechs Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The NISS08

More information

Installation Guide. Index. Vehicle Canbus Integration System

Installation Guide. Index. Vehicle Canbus Integration System Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Index

More information

Vehicle Application Guide... Key2GO... Installation Without T-Harness... With T-Harness THCHD3... Vehicle Wiring Reference Charts...

Vehicle Application Guide... Key2GO... Installation Without T-Harness... With T-Harness THCHD3... Vehicle Wiring Reference Charts... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide... Key2GO...

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide... Key2GO... Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

Vehicle Application Guide... Installation (Wiring Diagrams & Vehicle Wiring Reference Charts) Type 1... Type 2... Type 3...

Vehicle Application Guide... Installation (Wiring Diagrams & Vehicle Wiring Reference Charts) Type 1... Type 2... Type 3... Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

INSTALLATION GUIDE Dodge/Ram CHRYSLER Designed by Installers for Installers

INSTALLATION GUIDE Dodge/Ram CHRYSLER Designed by Installers for Installers INSTALLATION GUIDE DB3 2016 Dodge/Ram 1500-403.CHRYSLER6 2.04 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

INSTALLATION GUIDE Honda Accord HONDA Designed by Installers for Installers

INSTALLATION GUIDE Honda Accord HONDA Designed by Installers for Installers INSTALLATION GUIDE DB3 2011 Honda Accord - 403.HONDA56 3.22 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

Installation Guide IMPORTANT! Index. Platform: XK09 Firmware: NISS01

Installation Guide IMPORTANT! Index. Platform: XK09 Firmware: NISS01 Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The XK09-NISS01

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide...

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide... Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The CHRYSLER8

More information

Installation Guide. Index

Installation Guide. Index Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The XK09-PKN3

More information

INSTALLATION GUIDE Toyota Corolla (H Key) TL Designed by Installers for Installers

INSTALLATION GUIDE Toyota Corolla (H Key) TL Designed by Installers for Installers INSTALLATION GUIDE DB3 2017 Toyota Corolla (H Key) - 403.TL10 2.18 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only!

More information

The FORD3 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Ford and Lincoln vehicles.

The FORD3 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Ford and Lincoln vehicles. Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The firmware

More information

INSTALLATION GUIDE Toyota Camry (G Key) TL Designed by Installers for Installers

INSTALLATION GUIDE Toyota Camry (G Key) TL Designed by Installers for Installers INSTALLATION GUIDE DB3 2013 Toyota Camry (G Key) - 403.TL5 4.00 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only!

More information

INSTALLATION GUIDE Chevrolet Spark GM Designed by Installers for Installers

INSTALLATION GUIDE Chevrolet Spark GM Designed by Installers for Installers INSTALLATION GUIDE DB3 2015 Chevrolet Spark - 403.GM10 4.07 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

MODEL: GMDLBP. Installation Guide. Index DLPK. combo. Product Description. Product Features. GM Doorlock Alarm & Transponder/Passlock Interface

MODEL: GMDLBP. Installation Guide. Index DLPK. combo. Product Description. Product Features. GM Doorlock Alarm & Transponder/Passlock Interface MODEL: GMDLBP GM Doorlock Alarm & Transponder/Passlock Interface Installation Guide Product Description Data Bus Doorlock Alarm & GM Passkey/Passlock Interface: Lock/Unlock, Driver's Priority Unlock, Trunk/Hatch,

More information

Programming Module Programming & Reset... Features & Options List... Features Programming... LED Diagnostics & Troubleshooting...

Programming Module Programming & Reset... Features & Options List... Features Programming... LED Diagnostics & Troubleshooting... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The DBALL/DBALL2-NISS01

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide...

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide... Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The CHRYSLER9

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission.

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The TL

More information

Important! NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide...02

Important! NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide...02 Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The NISS3HT

More information

This module can only be flashed and configured using XpressVIP at or using the Directechs

This module can only be flashed and configured using XpressVIP at  or using the Directechs Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The HYUNDAI

More information

The optional Plug & Play T-Harness THCHD3 (sold separately) provides simpler and faster installation.

The optional Plug & Play T-Harness THCHD3 (sold separately) provides simpler and faster installation. Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

INSTALLATION GUIDE Dodge/Ram Grand Caravan CHRYSLER Designed by Installers for Installers

INSTALLATION GUIDE Dodge/Ram Grand Caravan CHRYSLER Designed by Installers for Installers INSTALLATION GUIDE DB3 2014 Dodge/Ram Grand Caravan - 403.CHRYSLER 7.23 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer

More information

INSTALLATION GUIDE Chevrolet Silverado GM Designed by Installers for Installers

INSTALLATION GUIDE Chevrolet Silverado GM Designed by Installers for Installers INSTALLATION GUIDE DB3 2010 Chevrolet Silverado 1500. 403.GM11 1.08 Designed by Installers for Installers 2018 Directed, Vista CA This product is intended for installation by a professional installer only!

More information

ALWAYS TEST THE INSTALLATION ONCE A RELAY IS INSTALLED, TO ENSURE THE VEHICLE CANNOT BE STARTED IN GEAR.

ALWAYS TEST THE INSTALLATION ONCE A RELAY IS INSTALLED, TO ENSURE THE VEHICLE CANNOT BE STARTED IN GEAR. Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The DBALL-NISS2

More information

Programming Module Programming & Reset... Features & Options List... Features Programming... LED Diagnostics & Troubleshooting...

Programming Module Programming & Reset... Features & Options List... Features Programming... LED Diagnostics & Troubleshooting... Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The DBALL-NISS03

More information

The FORD12 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Ford and Lincoln

The FORD12 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Ford and Lincoln Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The FORD12

More information

INSTALLATION GUIDE Nissan Altima (Smart Key) NISS3HT 3.08 RSR. Designed by Installers for Installers

INSTALLATION GUIDE Nissan Altima (Smart Key) NISS3HT 3.08 RSR. Designed by Installers for Installers INSTALLATION GUIDE DB3 2009 Nissan Altima (Smart Key) - 403.NISS3HT 3.08 RSR Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer

More information

The SUBARU3 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Subaru vehicles.

The SUBARU3 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Subaru vehicles. Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The SUBARU3

More information

Vehicle Application Guide... Installation (Wiring Diagram & Vehicle Wiring Reference Charts)...

Vehicle Application Guide... Installation (Wiring Diagram & Vehicle Wiring Reference Charts)... Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The GM

More information

MODEL: PLJX GM PASSLOCK 1 & 2 & VATS & ION SELF LEARNING DIGITAL INTERFACE: JUMPER SELECTION

MODEL: PLJX GM PASSLOCK 1 & 2 & VATS & ION SELF LEARNING DIGITAL INTERFACE: JUMPER SELECTION DL doorlock INTERFACE MODEL: PLJX GM PASSLOCK 1 & 2 & VATS & ION SELF LEARNING DIGITAL INTERFACE: JUMPER SELECTION INSTALLATION GUIDE PRODUCT DESCRIPTION PLJX is a "Self Learning" unit designed to bypass

More information

Vehicle Application Guide...

Vehicle Application Guide... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

Type 3... Type 2... Type 4... Type 5... Type 6... Type 7...

Type 3... Type 2... Type 4... Type 5... Type 6... Type 7... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

Vehicle Compatibility Chart...

Vehicle Compatibility Chart... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide CANMAX400

More information

INSTALLATION GUIDE Mazda 6 (Smart Key) MA RSR. Designed by Installers for Installers

INSTALLATION GUIDE Mazda 6 (Smart Key) MA RSR. Designed by Installers for Installers INSTALLATION GUIDE DB3 2009 Mazda 6 (Smart Key) - 403.MA1 4.00 RSR Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only!

More information

INSTALLATION GUIDE Chevrolet Cruze GM Designed by Installers for Installers

INSTALLATION GUIDE Chevrolet Cruze GM Designed by Installers for Installers INSTALLATION GUIDE DB3 2011 Chevrolet Cruze - 403.GM10 4.12 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

Vehicle Application Guide...

Vehicle Application Guide... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

This guide supports the installation of a DBALL in Range Extender Ready ( RXT) mode with or without a Plug & Play T-Harnesses OBDTHDGM1/ OBDGMD1 or

This guide supports the installation of a DBALL in Range Extender Ready ( RXT) mode with or without a Plug & Play T-Harnesses OBDTHDGM1/ OBDGMD1 or Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

The GM9 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Buick, Cadillac, Chevrolet and GMC vehicles.

The GM9 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Buick, Cadillac, Chevrolet and GMC vehicles. Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The GM9

More information

Vehicle Application Guide... Installation Type A... Type B... Type C... Wiring Connection Reference Chart...

Vehicle Application Guide... Installation Type A... Type B... Type C... Wiring Connection Reference Chart... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide XK01-AMDL

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission.

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

Vehicle Application Guide... Wiring Diagram...

Vehicle Application Guide... Wiring Diagram... Platform: DBALL/DBALL Firmware: GM Rev.: 050 Update Alert: Firmware updates are poed to e web on a regular basis. We recomme at you check for firmware a/or inall guide updates prior to inalling is product.

More information

This firmware does not support transponder override. One factory programmed key is required to install a remote starter.

This firmware does not support transponder override. One factory programmed key is required to install a remote starter. Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

Important: This guide is compatible with the NISS1HT firmware version 3.11 and lower. Vehicle Application Guide...

Important: This guide is compatible with the NISS1HT firmware version 3.11 and lower. Vehicle Application Guide... Platform: DBALL/DBALL Rev.: 060 Update Alert: Firmware updates are poed to e web on a regular basis. We recomme at you check for firmware a/or inall guide updates prior to inalling is product. Inallation

More information

INDEX. Vehicle Canbus Integration System Rev.:

INDEX. Vehicle Canbus Integration System Rev.: Rev.: 24 Page 1 to Update Alert: Firmware updates are posted to the web on a regular basis. We recommend you check for firmware and/or install guide updates prior to installation of this product. INDEX

More information

INSTALLATION GUIDE. Directed Digital Solutions NISS3HT. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions NISS3HT. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions NISS3HT Designed by Installers for Installers 208 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to

More information

INSTALLATION GUIDE. Directed Digital Solutions HONDA4. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions HONDA4. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions HONDA4 Designed by Installers for Installers 2018 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to

More information

Directed Digital System

Directed Digital System Directed Digital System HYUNDAI2 Firmware Specific Guide This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional

More information

INSTALL GUIDE OEM-AL(RS)-NI8-[FLCAN]-EN

INSTALL GUIDE OEM-AL(RS)-NI8-[FLCAN]-EN INSTALL GUIDE DOCUMENT NUMBER 5679 REVISION DATE 084 FIRMWARE OEM-AL(RS)-NI8-[FLCAN] HARDWARE FLCAN ACCESSORIES FLPROG (REQUIRED) TERMS OF USE: Automotive Data Solutions Inc. ( ADS ) products are strictly

More information

INSTALLATION GUIDE. Directed Digital Solutions MIT2. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions MIT2. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions MIT2 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to

More information

INSTALLATION GUIDE. Directed Digital Solutions MIT6. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions MIT6. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions MIT6 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to

More information

INSTALLATION GUIDE. Directed Digital Solutions HK7. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions HK7. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions HK7 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide...

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

INSTALL GUIDE OEM-AL(RS)-NI9-[FLCAN]-EN

INSTALL GUIDE OEM-AL(RS)-NI9-[FLCAN]-EN INSTALL GUIDE DOCUMENT NUMBER 5506 REVISION DATE 08098 FIRMWARE OEM-AL(RS)-NI9-[FLCAN] HARDWARE FLCAN ACCESSORIES FLPROG (REQUIRED) TERMS OF USE: Automotive Data Solutions Inc. ( ADS ) products are strictly

More information

The AS-2320TW kit offers a complete remote start solution including a 2-way LED transmitter/receiver and an all-in-one mobile integration module.

The AS-2320TW kit offers a complete remote start solution including a 2-way LED transmitter/receiver and an all-in-one mobile integration module. Owner s Guide The AS-2320TW kit offers a complete remote start solution including a 2-way LED transmitter/receiver and an all-in-one mobile integration module. Index Taking Inventory of the AS-2320TW Kit...

More information

INSTALLATION GUIDE. Directed Digital Solutions TL5. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions TL5. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions TL5 Designed by Installers for Installers 07 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install

More information

INSTALLATION GUIDE. Directed Digital Solutions CHRYSLER13. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions CHRYSLER13. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions CHRYSLER13 Designed by Installers for Installers 2018 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

INSTALL GUIDE FLC-NI(RS)-NI6-[FLRSNI5]-EN

INSTALL GUIDE FLC-NI(RS)-NI6-[FLRSNI5]-EN INSTALL GUIDE FLC-NI(RS)-NI-[FLRSNI]-EN DOCUMENT NUMBER REVISION DE 000 FIRMWARE FLC-NI(RS)-NI-[FLRSNI] HARDWARE FLRSNI ACCESSORIES FLPROG (REQUIRED) FLRF// (OPTIONAL) CARLINK ASCL (OPTIONAL) NOTICE The

More information

INSTALLATION GUIDE. Directed Digital Solutions CHRYSLER10. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions CHRYSLER10. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions CHRYSLER10 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

User guide. CANMAX400 Standalone. Thank you for purchasing a Directed Electronics, Inc. CANMAX400 solution.

User guide. CANMAX400 Standalone. Thank you for purchasing a Directed Electronics, Inc. CANMAX400 solution. Thank you for purchasing a Directed Electronics, Inc. CANMAX400 solution. CANMAX400 supports multiple data bus architectures including: CAN High speed, CAN Single Wire, CAN Fault Tolerant, GM-LAN, J1850,

More information

INSTALL GUIDE OEM-AL(RS)-TL7-[FLCAN]-EN

INSTALL GUIDE OEM-AL(RS)-TL7-[FLCAN]-EN INSTALL GUIDE DOCUMENT NUMBER 545 REVISION DATE 08098 FIRMWARE OEM-AL(RS)-TL7-[FLCAN] HARDWARE FLCAN ACCESSORIES FLPROG (REQUIRED) TERMS OF USE: Automotive Data Solutions Inc. ( ADS ) products are strictly

More information

INSTALLATION GUIDE. Directed Digital Solutions NISS2HT. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions NISS2HT. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions NISS2HT Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

2005 directed electronics, inc.

2005 directed electronics, inc. Viper Model 211HV Owner s Guide limited lifetime consumer warranty Directed Electronics, Inc. ("Directed") promises to the original purchaser to repair or replace with a comparable reconditioned model

More information

Directed Digital System

Directed Digital System Directed Digital System MIT4 Firmware Specific Guide This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional

More information

Automotive Data Solutions Inc. AVAILABLE FOR : FLCAN. Rev. Date: June 28, 2018 Doc. No.: ##51678##

Automotive Data Solutions Inc. AVAILABLE FOR : FLCAN. Rev. Date: June 28, 2018 Doc. No.: ##51678## Automotive Data Solutions Inc. INSTALL GUIDE FLC-AL(DL)-HK-EN AVAILABLE FOR : FLCAN Rev. Date: June, 0 Doc. No.: #### HK U.S. PATENT NO.,,0 PLEASE VISIT WWW.FLASHLOGIC.COM FOR COMPLETE PRODUCT DETAILS

More information

INSTALLATION GUIDE. Directed Digital Solutions HKHT1. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions HKHT1. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions HKHT1 Designed by Installers for Installers 2018 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to

More information

DS4+ INSTALLATION GUIDE VW08. Designed by Installers for Installers

DS4+ INSTALLATION GUIDE VW08. Designed by Installers for Installers INSTALLATION GUIDE DS4+ VW08 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install this product by

More information

Automotive Data Solutions Inc. AVAILABLE FOR : ADS-AL CA. Rev. Date: August 29, 2018 Doc. No.: ##52817##

Automotive Data Solutions Inc. AVAILABLE FOR : ADS-AL CA. Rev. Date: August 29, 2018 Doc. No.: ##52817## Automotive Data Solutions Inc. INSTALL GUIDE ADS-AL(DL)-NI8-EN AVAILABLE FOR : ADS-AL CA Rev. Date: August 29, 2018 Doc. No.: ##52817## NI8 U.S. PATENT NO. 8,856,780 PLEASE VISIT WWW.IDATALINK.COM FOR

More information

CAN1 (Control Area Network) Bus Interface

CAN1 (Control Area Network) Bus Interface CAN (Control Area Network) Bus Interface Installation Guide NOTE: This product is intended for installation by a professional installer only! Any attempt to install this product by any person other than

More information

Alarms & Remote Start

Alarms & Remote Start Alarms & Remote Start INSTALL GUIDE OEM-AL(RS)-CH0-[OL-MDB-ALL]-EN DOCUMENT NUMBER 990 REVISION DATE 008 FIRMWARE OEM-AL(RS)-CH0-[OL-MDB-ALL] HARDWARE OL-MDB-ALL ACCESSORIES OL-LOADER (REQUIRED) NOTICE

More information

INSTALLATION GUIDE. Directed Digital Solutions TL6. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions TL6. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions TL6 Designed by Installers for Installers 2018 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install

More information

INSTALLATION GUIDE. Directed Digital Solutions CHRYSLER7. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions CHRYSLER7. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions CHRYSLER7 Designed by Installers for Installers 2016 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

INSTALL GUIDE OEM-AL(RS)-TL2-[FLCAN]-EN

INSTALL GUIDE OEM-AL(RS)-TL2-[FLCAN]-EN INSTALL GUIDE OEM-AL(RS)-TL-[FLCAN]-EN DOCUMENT NUMBER 5364 REVISION DATE 08098 FIRMWARE OEM-AL(RS)-TL-[FLCAN] HARDWARE FLCAN ACCESSORIES FLPROG (REQUIRED) TERMS OF USE: Automotive Data Solutions Inc.

More information

Directed Digital System

Directed Digital System Directed Digital System TL Firmware Specific Guide This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional

More information

INSTALLATION GUIDE. Directed Digital Solutions FORD12. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions FORD12. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions FORD12 Designed by Installers for Installers 2018 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to

More information

Understanding the RS-623 Remote... Using the RS-623 Remote... Listing the Available Commands...

Understanding the RS-623 Remote... Using the RS-623 Remote... Listing the Available Commands... Owner s Guide The RS-CHLED and RS-CHLCD kits each offer a complete remote start solution including a 2-way LED or LCD transmitter/receiver and an all-in-one mobile integration module. RS-CHLED RS-CHLCD

More information

INSTALLATION GUIDE. Directed Digital Solutions FORD4. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions FORD4. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions FORD Designed by Installers for Installers 0 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install

More information

Automotive Data Solutions Inc. AVAILABLE FOR : ADS-AL CA. Rev. Date: January 18, 2018 Doc. No.: ##47334##

Automotive Data Solutions Inc. AVAILABLE FOR : ADS-AL CA. Rev. Date: January 18, 2018 Doc. No.: ##47334## Automotive Data Solutions Inc. INSTALL GUIDE ADS-AL(DL)-HK7-EN AVAILABLE FOR : ADS-AL CA Rev. Date: January 8, 08 Doc. No.: ##7## HK7 U.S. PATENT NO. 8,8,780 PLEASE VISIT WWW.IDATALINK.COM FOR COMPLETE

More information