IGNITION TOOLS & TEST EQUIPMENT

Size: px
Start display at page:

Download "IGNITION TOOLS & TEST EQUIPMENT"

Transcription

1 PRODUCT GUIDE 07 REV. 06/2013 IGNITION TOOLS & TEST EQUIPMENT Chapter 07 07/1

2 IGNITION TOOLS & TEST EQUIPMENT SparkView MOTORTECH HIGH VOLTAGE INDICATOR The SparkView is a handheld device developed by MOTORTECH that can monitor the high voltage required by the spark plug while the engine is running. With a measuring clamp or cable and the display for up to 40 kv, it is easy to determine the condition of the spark plugs and the time at which they need to be replaced. This guarantees a constant performance of the engine and a maximum utilization of the spark plugs. Quick and comfortable monitoring on a running engine makes it possible to detect Wear of spark plugs Failure of the ignition system (damaged ignition coil, spark plug lead or ignition controller) Faulty compression of a cylinder SparkView High Voltage Indicator Figure SparkView high voltage indicator incl. SparkScan1 high voltage clamp SparkView high voltage indicator incl. BNC cable /2

3 SparkScan1 MOTORTECH HIGH VOLTAGE CLAMP SparkScan1 is designed for operators who want to monitor their high voltage traces in a simple way. The inductive high voltage clamp is connected to a Scope. When attaching the clamp to a conventional spark plug wire (7mm), the probe measures the high voltage pulse and via scope screen the operator can analyse the trace. Measuring high voltage peak (kv) and spark duration (µsec) of all cylinders of an engine in a routine manner, will allow preventive maintenance of the equipment. SparkScan1 High Voltage Clamp Length SparkScan1 high voltage clamp 2.0 m/7.0 ft. Scope Meter Digital Oscilloscope The Digital scopemeter is a compact 20 MHz or 40MHz two channel scope. Ideal for troubleshooting of industrial machinery, instrumentation, control and power systems. The Scopemeter has unique features like connect-and-view and trendplot that simplify taking measurements and reduce troubleshooting time when working in the field or in industrial environments. Digital Scope Meter Digital scope meter - 110V Digital scope meter - 220V BNC Cable for use with SparkView or Scope Meter Length BNC cable 2.0 m/7.0 ft. 07/3

4 IGNITION TOOLS & TEST EQUIPMENT ICT MOTORTECH IGNITION COIL TESTER This test equipment is designed to offer service companies a professional tool to test all different kinds of ignition coils that were sold by engine manufacturers or aftermarket companies. A built in CD ignition, high voltage clamp and a spark gap allow realistic testing. Ignition Coil Tester Ignition coil tester incl. adaptor kits for popular ignition coils Adaptor Kits 1) Standard including Teflon Ignition Coil Adaptors and Connecting Leads Connections of included Lead Ignition Coil Ignition Coil Tester Adaptor kit - CATERPILLAR ignition coils DEUTSCH connector XLR connector Adaptor kit - ALTRONIC style ignition coils 2 pole XLR connector Adaptor kit - MOTORTECH style ignition coils 2 pole XLR connector Adaptor kit - Flange ignition coils MIL Style 3 pole socket, 180 XLR connector Adaptor kit - Integral ignition coils, outer thread MIL Style 2/3 pole socket, 180 XLR connector Adaptor kit - Integral ignition coils, inner thread MIL Style 2/3 pole socket, 180 XLR connector Adaptor kit - Externally mounted ignition coils MIL Style 2/3 pole socket, 180 XLR connector 1) All adaptor kits included in ignition coil tester. Adaptor Kits Special including Connecting Leads Connections of included Lead Ignition Coil Ignition Coil Tester Adaptor kit - CUMMINS ignition coil pole, 180 XLR connector Adaptor kit - GE JENBACHER ignition coil pole, 180 XLR connector 07/4

5 IPS MOTORTECH IGNITION PICKUP SIMULATOR Anyone trying to troubleshoot electronic ignition systems has come to the conclusion that there are so many different things that can create problems. The ignition pickup simulator allows the operator to simulate all pickup signals that are supposed to be generated by the different pickups installed on flywheel and camshaft. This way the ignition can actually be triggered with the appropriate amount of trigger events while the engine is not cranking. The IPS can be programmed for single and multiple pickup signal frequency. A variety of adaptor harnesses is available to allow use of the IPS with different ignition controller brands and models. IPS Ignition Pickup Simulator IPS Ignition Pickup Simulator Adaptor Harnesses 1) for IPS Ignition Pickup Simulator IPS Adaptor Harness for use with WOODWARD IC9xx series MOTORTECH MIC500 series ( ), WOODWARD IC100 series with inductive pickup MOTORTECH MIC500 series ( ), WOODWARD IC100 series with Hall effect pickup MOTORTECH MIC500 series ( ), WOODWARD IC100 series with magnetic pickup MOTORTECH MIC500 series ( ) MOTORTECH MIC500 series ( , ), ALTRONIC DIS & DISN, CATERPILLAR , FAIRBANKS MORSE IQ250 series ALTRONIC CPU95 series MOTORTECH MIC500 series ( ) MOTORTECH MIC500 series ( , , , ), WAUKESHA CEC (VHP/VGF series) MOTORTECH MIC3 series ( /-12), MIC4 series ( /-16), MIC5 series ( ) FAIRBANKS MORSE IQ750 series MOTORTECH MIC500 series ( , , ) MOTORTECH MIC850 series MOTORTECH MIC4 series ( /410-/440-8/-16), MIC5 series ( , ) 1) Need to be ordered separately. 07/5

6 IGNITION TOOLS & TEST EQUIPMENT Test Adaptor for MIC3, MIC4 and MIC5 Series Ignition Controller To enable operators and service personnel to check input signals to the ignition controller in a simple way, MOTORTECH offers a Test Adaptor that links between the 35 pole input connector and the appropriate harness. Terminals located around the test box allow easy access to each input signal entering the ignition controller. By use of a commonly used Digital Scope Meter, the following signals can be checked: Input voltage Analog input signal (4-20mA) Pickup signals Start/Stop signal Go/NoGo signal Timing schedule selection switch (A/B) For use with specific controllers Test adaptor MIC3 ( /-12) MIC4 ( /-16) MIC5 ( ) 07/6

7 ScopeLite MOTORTECH TIMING LIGHT The self-powered ScopeLite is designed to work with fully shielded ignition systems. A special clamp picks up the small trigger signal through the braid of conventional or MOT-Blues shielded spark plug leads. The signal is processed by the timing light and via LED technology a sequence of flashes is generated. On applications where MOTORTECH flange ignition coils with diagnostic interface are used, the ScopeLite can be attached directly to the BNC connector of the ignition coil. Even on applications with integral or standard flange ignition coils, the clamp can be attached to the shielded primary lead. When timing is checked on engines with non-shielded spark plug leads, a selector switch needs to be pushed which then steps down sensitivity. The automatic time based shut-off function saves the 2 built in 9 V batteries in case the operator forgets to turn off power. Make it easy and safe for the operator! ScopeLite MOTORTECH Timing Light ScopeLite LED timing light, incl. clamp, 200 in. standard connecting lead and carrying case Connecting leads (Standard and Non Standard Lengths 1) ) Length ScopeLite connecting lead 100 in ScopeLite connecting lead 200 in ScopeLite connecting lead 300 in ScopeLite connecting lead 400 in ScopeLite connecting lead 600 in. 1) If non standard length is required, please order separately from above chart. Use with MOT-Blues shielded spark plug leads. Use with conventional shielded spark plug leads. Use with MOTORTECH flange ignition coils with diagnostic interface or with shielded primary lead. Conversion 1 inch = 25,4 mm / 1 foot = 0,3 m 07/7

8 IGNITION TOOLS & TEST EQUIPMENT Timing Light Conventional Style Length Timing light 3.0 m/10.0 ft Timing light 10.0 m/30.0 ft. Digital Protractor The digital protractor is a compact rotational angle measuring tool. The unit is equipped with magnets for easy and flexible installation on flywheel, camshaft, pulley or any other rotating gear Digital protractor Spark Plug Lead Removal Tool for MAN Gas Engines Spark plug lead removal tool for MAN gas engines Installation Tool for Reluctor Pin Installation tool for reluctor pin Workshop Equipment Figure Spark plug test stand for M14, M18 and 7/8" spark plugs Engine simulator with 24 ignition coil rack 1 2 Conversion 1 inch = 25,4 mm / 1 foot = 0,3 m 07/8

9 Harness Connector Assembly Tools Figure Crimping tool for stainless steel wire studs Extraction tool for ITT contacts 16S Installation tool for MIL style connector pins Removal tool for MIL style connector pins High Tension Lead Assembly Tools Figure Crimping tool for stainless steel wire studs Crimping tool for Assembly tool for Crimping tool for (crimping tool insert already included) Crimping tool insert for to crimp terminal Crimping tool insert for to crimp terminal and /9

10 07/10 NOTES

11 INDEX Page Page , , / / /11

12 Headquarter Office Sales Partner MOTORTECH GmbH Hogrevestr Celle Germany Phone: +49 (5141) Fax: +49 (5141) motortech@motortech.de MOTORTECH Americas, LLC 1400 Dealers Avenue, Suite A New Orleans, LA USA Phone: +1 (504) Fax: +1 (504) info@motortechamericas.com MOTORTECH Shanghai Co. Ldt. Room 1018 Enterprise Square, No. 228 Meiyuan Road, Zhabei District, Shanghai China Phone: +86 (21) info@motortechshanghai.com Distributed by: Copyright The copyright for all materials used in this MOTORTECH publication is reserved. Any kind of duplication or use of objects such as pictures or texts in other electronic or printed publications without approval by MOTORTECH is not permitted. Trademark Information MOTORTECH products and the MOTORTECH logo are registered and/or common law trademarks of MOTORTECH Holding GmbH EN Rev.01/2016 MOTORTECH Product Guide Chapter 07 All OEM names and part numbers shown are for reference purposes only. All trademarks, logos and symbols used or shown in this MOTORTECH publication are exclusive objects to the right of their owners and are used for reference purposes only. 07/12

Integral Ignition Coils For Shielded Applications

Integral Ignition Coils For Shielded Applications Integral Ignition Coils For Shielded Applications GAS ENGINE TECHNOLOGY reliable efficient worldwide Integral Ignition Coils Slim Design General Features Primary connector pole for ALTRONIC compatibility

More information

APPLICATION GUIDE For CATERPILLAR G3400 Series

APPLICATION GUIDE For CATERPILLAR G3400 Series APPLICATION GUIDE For CATERPILLAR G3400 Series GAS ENGINE TECHNOLOGY reliable efficient worldwide Ignition Controllers MIC3+ Series Ignition Controllers High energy ignition controller for retrofits Plug

More information

Ignition Coils. Ignition Coils. For CATERPILLAR Gas Engines G3400, G3500, G3600 & GCM34 Series. reliable efficient worldwide

Ignition Coils. Ignition Coils. For CATERPILLAR Gas Engines G3400, G3500, G3600 & GCM34 Series. reliable efficient worldwide Ignition Coils For CATERPILLAR Gas Engines G00, G500, G600 & GCM Series Ignition Coils reliable efficient worldwide G00 & G500 Series Engines Ignition Coils Features For Non CSA Applications 1 Reinforced

More information

MIC4-ZS Ignition Controller For MWM /DEUTZ Gas Engines with TEM-ZS1 and TEM-ZS3 Ignition Systems

MIC4-ZS Ignition Controller For MWM /DEUTZ Gas Engines with TEM-ZS1 and TEM-ZS3 Ignition Systems MIC4-ZS Ignition Controller For MWM /DEUTZ Gas Engines with TEM-ZS1 and TEM-ZS3 Ignition Systems MIC4-ZS MOTORTECH IGNITION CONTROLLER Ignition Controller MIC4-ZS MOTORTECH IGNITION CONTROLLER Based on

More information

WAUKESHA VHP P9390 GL

WAUKESHA VHP P9390 GL WAUKESHA VHP P9390 GL Repowering MOTORTECH System Upgrade REV. 06/2013 MOTORTECH System Upgrades reliable efficient worldwide Try the alternative. Call the nearest MOTORTECH sales partner for more information.

More information

APPLICATION GUIDE For CATERPILLAR G3500 Series

APPLICATION GUIDE For CATERPILLAR G3500 Series APPLICATION GUIDE For CATERPILLAR G3500 Series GAS ENGINE TECHNOLOGY reliable efficient worldwide Ignition Coils Ignition Coils Flange ignition coil For unshielded and shielded applications For G3508,

More information

COMPACT PRODUCT GUIDE High Quality Parts and Accessories for Gas Engines

COMPACT PRODUCT GUIDE High Quality Parts and Accessories for Gas Engines COMPACT PRODUCT GUIDE High Quality Parts and Accessories for Gas Engines GAS ENGINE TECHNOLOGY reliable efficient worldwide Ignition Systems The MOTORTECH Ignition Controller Platform MOTORTECH has devolved

More information

MIC4 IGNITION CONTROLLER

MIC4 IGNITION CONTROLLER MIC4 IGNITION CONTROLLER MIC4 MOTORTECH IGNITION CONTROLLER Try the alternative. Call the nearest MOTORTECH sales partner for more information. REV.02/2015 MIC4 IGNITION CONTROLLER The economically attractive

More information

VariStep3 MOTORTECH Stepper Motor Driver Control

VariStep3 MOTORTECH Stepper Motor Driver Control VariStep3 MOTORTECH Stepper Motor Driver Control VariStep3 MOTORTECH STEPPER MOTOR DRIVER CONTROL Join the market leader in industrial ignition. Call the nearest MOTORTECH sales partner for more information.

More information

DetCon20. DetCon20. Detonation Control System MOTORTECH DETONATION CONTROL SYSTEM

DetCon20. DetCon20. Detonation Control System MOTORTECH DETONATION CONTROL SYSTEM DetCon20 Detonation Control System DetCon20 MOTORTECH DETONATION CONTROL SYSTEM Try the alternative. Call the nearest MOTORTECH sales partner for more information. REV.10/2013 DetCon20 MOTORTECH DETONATION

More information

Catalysts For Efficient and Reliable Emission Reduction

Catalysts For Efficient and Reliable Emission Reduction Catalysts For Efficient and Reliable Emission Reduction Exhaust Gas Aftertreatment reliable efficient worldwide General Information Catalysts For Efficient and Reliable Emission Reduction Increasingly

More information

VariFuel2/VariFuel2+ MOTORTECH Air/Gas Mixer. VariFuel2 MOTORTECH AIR/GAS MIXER

VariFuel2/VariFuel2+ MOTORTECH Air/Gas Mixer. VariFuel2 MOTORTECH AIR/GAS MIXER VariFuel2/VariFuel2+ MOTORTECH Air/Gas Mixer VariFuel2 MOTORTECH AIR/GAS MIXER General Information VariFuel2 MOTORTECH AIR/GAS MIXER MOTORTECH s VariFuel2 is a high-tech variable Venturi type air/gas mixer

More information

MOTORTECH Throttle Bodies For WAUKESHA VHP G/ GSI/ LT 6 & 12 Cylinder Engines

MOTORTECH Throttle Bodies For WAUKESHA VHP G/ GSI/ LT 6 & 12 Cylinder Engines MOTORTECH Throttle Bodies For WAUKESHA VHP G/ GSI/ LT 6 & 12 Cylinder Engines Join the market leader in industrial ignition. Call the nearest MOTORTECH sales partner for more information. MOTORTECH Throttle

More information

SCOPELITE TIMING LIGHT OPERATING MANUAL

SCOPELITE TIMING LIGHT OPERATING MANUAL SCOPELITE TIMING LIGHT OPERATING MANUAL MOTORTECH Tools & Test Equipment for Ignition Systems P/N 01.10.020-EN Rev. 11/2015 Copyright Copyright 2015 MOTORTECH GmbH. All rights reserved. Distribution and

More information

Ignition Controllers MIC3 MIC4 MIC5 MOTORTECH. MIC Series. reliable efficient worldwide MOTORTECH IGNITION CONTROLLER MOTORTECH IGNITION CONTROLLER

Ignition Controllers MIC3 MIC4 MIC5 MOTORTECH. MIC Series. reliable efficient worldwide MOTORTECH IGNITION CONTROLLER MOTORTECH IGNITION CONTROLLER MOTORTECH Ignition Controllers MIC3 MOTORTECH IGNITION CONTROLLER MIC4 MOTORTECH IGNITION CONTROLLER MIC5 MOTORTECH IGNITION CONTROLLER REV. 09/2014 06/2013 MIC Series reliable efficient worldwide 1 MIC

More information

SPARKSCAN1 HIGH VOLTAGE CLAMP OPERATING MANUAL

SPARKSCAN1 HIGH VOLTAGE CLAMP OPERATING MANUAL SPARKSCAN1 HIGH VOLTAGE CLAMP OPERATING MANUAL MOTORTECH Tools & Test Equipment for Ignition Systems P/N 01.10.019 Rev. 01/2013 Copyright Copyright 2012 MOTORTECH GmbH. All rights reserved. Distribution

More information

APPLICATION GUIDE For MWM /DEUTZ Gas Engines

APPLICATION GUIDE For MWM /DEUTZ Gas Engines APPLICATION GUIDE For MWM /DEUTZ Gas Engines GAS ENGINE TECHNOLOGY reliable efficient worldwide Ignition Coils Ignition Coils ALTRONIC Style ignition coil (+) ground For use with D.I.S. ignition controllers

More information

Compact Product Guide

Compact Product Guide Compact Product Guide 2012 High Quality Parts and Accessories for Gas Engines REV. 05/2012 P/N 01.00.003-EN IGNITION CONTROLLER MIC4 Motortech Ignition controller The new economically attractive MOTORTECH

More information

APPLICATION GUIDE For WAUKESHA VHP Series

APPLICATION GUIDE For WAUKESHA VHP Series APPLICATION GUIDE For WAUKESHA VHP Series GAS ENGINE TECHNOLOGY reliable efficient worldwide Ignition Controllers & Harnesses MIC3+CEC Ignition Controllers High energy retrofit ignition controller 1) More

More information

MOTORTECH. Ignition Controllers. MIC Series. reliable efficient worldwide

MOTORTECH. Ignition Controllers. MIC Series. reliable efficient worldwide MOTORTECH Ignition Controllers MIC Series reliable efficient worldwide MOTORTECH Ignition Controllers MIC MOTORTECH has developed into one of the leading manufacturers of ignition controllers in the global

More information

SPARK PLUG CLEANING KIT OPERATING MANUAL

SPARK PLUG CLEANING KIT OPERATING MANUAL SPARK PLUG CLEANING KIT OPERATING MANUAL Spark Plugs - Tools & Accessories P/N 01.20.002 Rev. 08/2015 Copyright Copyright 2015 MOTORTECH GmbH. All rights reserved. Distribution and reproduction of this

More information

VARIFUEL MAINTENANCE AND REPAIR INSTRUCTIONS

VARIFUEL MAINTENANCE AND REPAIR INSTRUCTIONS VARIFUEL2 140-65 MAINTENANCE AND REPAIR INSTRUCTIONS MOTORTECH Gas Regulation P/N 01.50.008-140-65-EN Rev. 06/2015 Copyright Copyright 2015 MOTORTECH GmbH. All rights reserved. Distribution and reproduction

More information

VARIFUEL MAINTENANCE AND REPAIR INSTRUCTIONS

VARIFUEL MAINTENANCE AND REPAIR INSTRUCTIONS VARIFUEL2 200-120 MAINTENANCE AND REPAIR INSTRUCTIONS MOTORTECH Gas Regulation P/N 01.50.008-200-120-EN Rev. 06/2015 Copyright Copyright 2015 MOTORTECH GmbH. All rights reserved. Distribution and reproduction

More information

MOTORTECH Training Offer The Key to your Success!

MOTORTECH Training Offer The Key to your Success! MOTORTECH Training Offer The Key to your Success! Technical Service & Support reliable efficient worldwide Technical Training at MOTORTECH The Key to your Success! Qualified employees are the cornerstone

More information

SECTION 2.10 IGNITION SYSTEM DESCRIPTION CEC IGNITION MODULE SYSTEM MAGNETO IGNITION SYSTEM

SECTION 2.10 IGNITION SYSTEM DESCRIPTION CEC IGNITION MODULE SYSTEM MAGNETO IGNITION SYSTEM SECTION 2.10 SYSTEM DESCRIPTION CEC SYSTEM The Custom Engine Control (CEC) Ignition Module is located on the engine's left side (see Figure 2.10-1 and Figure 2.10-2). The CEC Ignition Module system consists

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS WARNING: WARNING: www.altronicinc.com DEVIATION DEVIATION FROM THESE FROM INSTRUCTIONS THESE INSTRUCTIONS MAY LEAD MAY TO LEAD IMPROPER TO IMPROPER OP- ERATION OF ENGINE THE MACHINE

More information

Small engine EFI conversion kits VRS technical spec VRS SENSOR. Technical Spec ECOTRONS LLC COPY RIGHTS ECOTRONS ALL RIGHTS RESERVED

Small engine EFI conversion kits VRS technical spec VRS SENSOR. Technical Spec ECOTRONS LLC COPY RIGHTS ECOTRONS ALL RIGHTS RESERVED VRS SENSOR Technical Spec ECOTRONS LLC COPY RIGHTS ECOTRONS ALL RIGHTS RESERVED Note: If you are not sure about any specific details, please contact us at info@ecotrons.com. Copy rights ECOTRONS LLC 1

More information

Ignition Systems for Industrial Engines

Ignition Systems for Industrial Engines Ignition Systems for Industrial Engines Altronic Ignition Systems CONTENTS Altronic Ignition Systems Overview and Guide Contents and Introduction... 2 Application Guide... 3 Solid-State/Mechanical Ignition

More information

DTC P0345 Camshaft Position Sensor "A" Circuit (Bank 2)

DTC P0345 Camshaft Position Sensor A Circuit (Bank 2) 196 1GR-FE EINE CONTROL SYSTEM SFI SYSTEM P0340 P0342 P0343 Camshaft Position Sensor "A" Circuit (Bank 1 or Single Sensor) Camshaft Position Sensor "A" Circuit Low Input (Bank 1 or Single Sensor) Camshaft

More information

Table of Contents. General Information...1. Components...2. Connection...4

Table of Contents. General Information...1. Components...2. Connection...4 Table of Contents General Information... Components... Connection...4 Interface of Main Unit...4 Oscilloscope...5 Multimeter...5 Voltage, Current, Resistance, Duty Cycle, Frequency and Battery Voltage...5

More information

ALTRONIC, INC. 712 TRUMBULLAVE. GIRARD, OHIO DIS. IGNITION SYSTEM 500 SERIES IMPORTANT SAFETY NOTICE

ALTRONIC, INC. 712 TRUMBULLAVE. GIRARD, OHIO DIS. IGNITION SYSTEM 500 SERIES IMPORTANT SAFETY NOTICE ALTRONIC D.I.S. MEDIUM ENGINES, 4-16 CYLINDERS SERVICE INSTRUCTIONS FORM DIS SI 6-91 ALTRONIC, INC. 712 TRUMBULLAVE. GIRARD, OHIO 44420 DIS. IGNITION SYSTEM 500 SERIES IMPORTANT SAFETY NOTICE PROPER INSTALLATION,

More information

PHLOX II. Ignition Control Systems. On-board diagnostics. Complete ignition system. Up to 16 cylinders. Precise ignition timing

PHLOX II. Ignition Control Systems. On-board diagnostics. Complete ignition system. Up to 16 cylinders. Precise ignition timing PHLOX II Ignition Control Systems Ignition Control Coil Rails Ignition Leads Pickups Coils Complete ignition system Precise ignition timing Increased spark plug durability Easy integration via CAN On-board

More information

CPU-XL VariSpark ADVANCED DIGITAL IGNITION SYSTEM FOR LARGE GAS ENGINES

CPU-XL VariSpark ADVANCED DIGITAL IGNITION SYSTEM FOR LARGE GAS ENGINES CPU-XL VariSpark ADVANCED DIGITAL IGNITION SYSTEM FOR LARGE GAS ENGINES n State-of-the-art, crankshaft-referenced digital ignition system for natural-gas fueled integral compressor engines n Innovative

More information

DTC P0657 Actuator Supply Voltage Circuit / Open

DTC P0657 Actuator Supply Voltage Circuit / Open 301 DTC P0657 Actuator Supply Voltage Circuit / Open DCRIPTION The ECM monitors the output voltage to the throttle actuator. This self-check ensures that the ECM is functioning properly. The output voltage

More information

CPU-95 ADVANCED DIGITAL IGNITION SYSTEM FOR INDUSTRIAL ENGINES

CPU-95 ADVANCED DIGITAL IGNITION SYSTEM FOR INDUSTRIAL ENGINES New Backward-Compatible Enhanced CPU-95 Display Now Available CPU-95 ADVANCED DIGITAL IGNITION SYSTEM FOR INDUSTRIAL ENGINES Microprocessor-based, crankshaft referenced digital ignition system for medium-sized

More information

Before performing spark test, ensure ignitor is properly grounded.

Before performing spark test, ensure ignitor is properly grounded. Page 1 of 10 IGNITION CHECKS SPARK TEST NOTE: Before performing spark test, ensure ignitor is properly grounded. 1. Disconnect high tension coil wire from distributor. Hold coil wire approximately 1/2"

More information

MSD 7AL-3, Ignition Control PN 7230

MSD 7AL-3, Ignition Control PN 7230 MSD 7AL-3, Ignition Control PN 7230 Important: Read the instructions before attempting the installation. Parts Included: 1-7AL-3, PN 7230 1 - Parts bag (wires and connectors) 4 - RPM Modules 3000, 7000,

More information

DTC P0340 CAMSHAFT POSITION SENSOR A CIRCUIT (BANK 1 OR SINGLE SENSOR)

DTC P0340 CAMSHAFT POSITION SENSOR A CIRCUIT (BANK 1 OR SINGLE SENSOR) 05536 DTC P0340 CAMSHAFT POSITI SENSOR A CIRCUIT (BANK 1 OR SINGLE SENSOR) 05EXU05 DTC P0341 CAMSHAFT POSITI SENSOR A CIRCUIT RANGE/PERFORMANCE (BANK 1 OR SINGLE SENSOR) DTC P0345 CAMSHAFT POSITI SENSOR

More information

Crankshaft Position Sensor

Crankshaft Position Sensor 1 of 7 1 GM Bonneville/Eighty Eight/LeSabre 1986-1999 Crankshaft Position Sensor OPERATION TESTING REMOVAL & INSTALLATION See Figures 1, 2 and 3 The dual Crankshaft Position (CKP) sensor is mounted to

More information

5.3 Distributor Ignition System (DI) Engine 120 LH-SFI

5.3 Distributor Ignition System (DI) Engine 120 LH-SFI Preliminary work: Diagnostic Trouble Code (DTC) Readout.................... 11 Preparation for Test 1. Ignition: OFF 2. After determining which ignition control module (N1/4) and/or (N1/5) is indicating

More information

Secondary Diagnosis. By Randy Bernklau

Secondary Diagnosis. By Randy Bernklau Secondary Diagnosis Most technicians have diagnosed secondary ignition systems using the large console-type analog scopes, but there are times when it just isn t practical to use an analyzer that is that

More information

CPU-95EVS Enhanced VariSpark Digital Ignition System for Industrial Engines

CPU-95EVS Enhanced VariSpark Digital Ignition System for Industrial Engines CPU-95EVS Enhanced VariSpark Digital Ignition System for Industrial Engines Features VariSpark Spark Profile Control Users can select from one of six VariSpark spark energy profiles embedded within the

More information

DTC P0340 Camshaft Position Sensor A Circuit. DTC P0341 Camshaft Position Sensor A Circuit Range/Performance

DTC P0340 Camshaft Position Sensor A Circuit. DTC P0341 Camshaft Position Sensor A Circuit Range/Performance DIAGNOSTIS EINE (2UZFE) DI637 DIDRK01 DT P0340 amshaft Position Sensor A ircuit DT P0341 amshaft Position Sensor A ircuit Range/Performance DT P0345 amshaft Position Sensor A ircuit (Bank 2) DT P0346 amshaft

More information

MSD Zero-Cross Distributor Chevrolet - PN 83971

MSD Zero-Cross Distributor Chevrolet - PN 83971 MSD Zero-Cross Distributor Chevrolet - PN 83971 Parts Included: 1 Distributor 1 Gasket 1 Hold Down & Hardware 1 Gear Lubricant 2 O-Rings IMPORTANT The Separate Pickup Zero-Cross Distributors use two completely

More information

Small engine EFI conversion kits Hall Effect Sensor technical spec. Hall Effect Sensor. Technical Spec ECOTRONS LLC COPY RIGHTS ECOTRONS

Small engine EFI conversion kits Hall Effect Sensor technical spec. Hall Effect Sensor. Technical Spec ECOTRONS LLC COPY RIGHTS ECOTRONS Hall Effect Sensor Technical Spec ECOTRONS LLC COPY RIGHTS ECOTRONS ALL RIGHTS RESERVED Note: If you are not sure about any specific details, please contact us at info@ecotrons.com. Copy rights ECOTRONS

More information

Viper 90R Dies After Shifting

Viper 90R Dies After Shifting 3/9/2005 Problem: Unit will not shift into gear or engine dies when shifting into gear. (1) i. Turn on the ignition switch. ii. Set selector switch to neutral (N) position. iii. Set stop switch to O position.

More information

Points Conversion. Optical Trigger Conversion. Specifications. Applications. Optical Trigger - Installation Kits CRANECAMS.

Points Conversion. Optical Trigger Conversion. Specifications. Applications. Optical Trigger - Installation Kits CRANECAMS. Points Conversion Optical Trigger Conversion Easy to install in less than 1 hour! Converts points-type distributor to precision optically triggered system! No maintenance! Drives HI-6, HI-6S and most aftermarket

More information

Delomatic 400 (DM 400) based Gas Engine and Combined Heat and Power (CHP) Control and Management System

Delomatic 400 (DM 400) based Gas Engine and Combined Heat and Power (CHP) Control and Management System Table of contents 1. WARNINGS AND LEGAL INFORMATION... 3 3.5 LEGAL INFORMATION AND RESPONSIBILITY... 3 3.6 ELECTROSTATIC DISCHARGE AWARENESS... 3 3.7 SAFETY ISSUES... DELOMATIC 400 GAS 3 3.8 DISCLAIMER...

More information

AUTOMOTIVE TECHNOLOGY Electricity and Electronics

AUTOMOTIVE TECHNOLOGY Electricity and Electronics AUTOMOTIVE TECHNOLOGY Electricity and Electronics Al Santini Retired, College of DuPage Glen Ellyn, Illinois Jack Erjavec, Series Editor Professor Emeritus, Columbus State Community College Columbus, Ohio

More information

DTC P1351 Ignition Coil Control Circuit High Voltage

DTC P1351 Ignition Coil Control Circuit High Voltage Page 1 of 5 1996 Chevrolet Chevy K Pickup - 4WD Chevy Pickup, GMC Pickup, Suburban, Tahoe, Yukon (VIN C/K) Service Manual Document ID: 34079 DTC P1351 Ignition Coil Control Circuit High Voltage Circuit

More information

Table of contents. Tools by System: Index of tools by Part Number:...P 21. No Year All. Model All

Table of contents. Tools by System: Index of tools by Part Number:...P 21. No Year All. Model All Date : December 9 2008 Subject : Service Tools No 2009-1 Year All Model All BRP is proud to introduce its latest Service Tools Bulletin. These special tools were designed to help you efficiently service

More information

DTC P0335 Crankshaft Position Sensor "A" Circuit

DTC P0335 Crankshaft Position Sensor A Circuit 2TR-FE EINE CONTROL SYSTEM SFI SYSTEM 77 DTC P0335 Crankshaft Position Sensor "A" Circuit DTC P0339 Crankshaft Position Sensor "A" Circuit Intermittent DCRIPTION The Crankshaft Position (CKP) sensor system

More information

Ignition System Fundamentals

Ignition System Fundamentals Ignition System Fundamentals Chapter 37 Objectives Describe the functions of ignition system parts Explain the operation of points, electronic, and computer ignition systems Give an overview of the different

More information

INSTALLATION INSTRUCTIONS for. FC 2000 Series

INSTALLATION INSTRUCTIONS for. FC 2000 Series INSTALLATION INSTRUCTIONS for Fire Control (FC) Ignition System FC 2000 Series Owners Manual Introduction...2 Specifications...2 Coil Compatibilities...2 Wire Functions...2 Connections...3-6 Connections

More information

Hall Effect Sensor. Technical Spec ECOTRONS LLC COPY RIGHTS ECOTRONS ALL RIGHTS RESERVED

Hall Effect Sensor. Technical Spec ECOTRONS LLC COPY RIGHTS ECOTRONS ALL RIGHTS RESERVED Hall Effect Sensor Technical Spec ECOTRONS LLC COPY RIGHTS ECOTRONS ALL RIGHTS RESERVED Note: If you are not sure about any specific details, please contact us at info@ecotrons.com. Product: Hall Effect

More information

DTC P0300 Random/Multiple Cylinder Misfire Detected

DTC P0300 Random/Multiple Cylinder Misfire Detected DI63 DI7DE01 DTC P0300 Random/Multiple Cylinder Misfire Detected DTC P0301 Cylinder 1 Misfire Detected DTC P0302 Cylinder 2 Misfire Detected DTC P0303 Cylinder 3 Misfire Detected DTC P0304 Cylinder 4 Misfire

More information

INSTALLATION MANUAL DIS4-009 DISTRIBUTORLESS IGNITION SYSTEM FOR ALL A/C VWs USING BOSCH 009 DISTRIBUTOR

INSTALLATION MANUAL DIS4-009 DISTRIBUTORLESS IGNITION SYSTEM FOR ALL A/C VWs USING BOSCH 009 DISTRIBUTOR INSTALLATION MANUAL DIS4-009 DISTRIBUTORLESS IGNITION SYSTEM FOR ALL A/C VWs USING BOSCH 009 DISTRIBUTOR TABLE OF CONTENTS INTRODUCTION... 2 GENERAL COMMENTS... 3 REMOVE STOCK COMPONENTS... 3 FIGURES...

More information

MONO - MOTRONIC 0309 En

MONO - MOTRONIC 0309 En 02.1992 MONO - MOTRONIC 0309 En Published by: Robert Bosch GmbH Division KH After-Sales-Service Department for Training and Technology (KH/VSK) Please direct questions and comments concerning the contents

More information

Current Clamp, clamped around the starter wire. Pico Scope. Relative Compression Test on a 2007 Honda Accord SE 4CYL

Current Clamp, clamped around the starter wire. Pico Scope. Relative Compression Test on a 2007 Honda Accord SE 4CYL P a g e 1 Relative Compression Test on a 2007 Honda Accord SE 4CYL A relative compression test is performed by monitoring the electrical current to the starter while cranking the engine over. The amount

More information

MSD Pro-Billet Small Diameter Ready-to-Run Ford V8 Distributor PN 8350/83503; 351C-460, PN 8354; 351W PN 8352/83523; 289/302

MSD Pro-Billet Small Diameter Ready-to-Run Ford V8 Distributor PN 8350/83503; 351C-460, PN 8354; 351W PN 8352/83523; 289/302 MSD Pro-Billet Small Diameter Ready-to-Run Ford V8 Distributor PN 8350/83503; 351C-460, PN 8354; 351W PN 8352/83523; 289/302 ONLINE PRODUCT REGISTRATION: Register your MSD product online. Registering your

More information

SERVICE BULLETIN. Legacy D* Outback D* Impreza 4-Door D* Impreza 5-Door XV Crosstrek D* Forester E* BRZ D*607924

SERVICE BULLETIN. Legacy D* Outback D* Impreza 4-Door D* Impreza 5-Door XV Crosstrek D* Forester E* BRZ D*607924 ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT - All Service Personnel Should Read and Initial in the boxes provided, right. SERVICE BULLETIN APPLICABILITY:

More information

MSD Pro-Billet Ready-to-Run Chrysler Distributor PN /354 Early Hemi PN Early Hemi

MSD Pro-Billet Ready-to-Run Chrysler Distributor PN /354 Early Hemi PN Early Hemi MSD Pro-Billet Ready-to-Run Chrysler Distributor PN 8391-331/354 Early Hemi PN 8389-392 Early Hemi ONLINE PRODUCT REGISTRATION: Register your MSD product online. Registering your product will help if there

More information

MODEL 520 REMOTE START ENGINE MANAGEMENT SYSTEM

MODEL 520 REMOTE START ENGINE MANAGEMENT SYSTEM MODEL 520 REMOTE START ENGINE MANAGEMENT SYSTEM DSE 520 ISSUE 4 4/4/02 MR 1 TABLE OF CONTENTS Section Page INTRODUCTION... 4 CLARIFICATION OF NOTATION USED WITHIN THIS PUBLICATION.... 4 1. OPERATION...

More information

Tachometers and Tach/Hourmeters

Tachometers and Tach/Hourmeters Tachometers and Tach/Hourmeters AT and ATH Series Installation Instructions IMPORTANT! These instructions are specific to tachometer models with a power input operating range of 11-28 VDC and calibration

More information

w.get2itparts.com Viper 90R-4 Dies After Shifting Or Indicator Lights Blink SCL /24/2005

w.get2itparts.com   Viper 90R-4 Dies After Shifting Or Indicator Lights Blink SCL /24/2005 10/24/2005 Viper 90R-4 Dies After Shifting Or Indicator Problem: Unit will not shift into gear or engine dies when shifting into gear. (1) i. Turn on the ignition switch. ii. Set selector switch to neutral

More information

PHLOX II. Ignition Control Systems. On-board diagnostics. Complete ignition system. Up to 16 cylinders. Precise ignition timing

PHLOX II. Ignition Control Systems. On-board diagnostics. Complete ignition system. Up to 16 cylinders. Precise ignition timing PHLOX II Ignition Control Systems Certified Ignition Control Coil Rails Ignition Leads Pickups Coils Complete ignition system Precise ignition timing Adjustable ignition energy reduces spark plug wear

More information

Owner s Manual TWIN CAM STAND-ALONE IGNITION P/N ASM5012

Owner s Manual TWIN CAM STAND-ALONE IGNITION P/N ASM5012 Owner s Manual TWIN CAM STAND-ALONE IGNITION P/N ASM5012 Thunder Heart Performance Corporation MANUAL P/N EI5012 120 Industrial Drive Revision 8/15/06 White House, TN 37188 www.thunder-heart.com TABLE

More information

18. IGNITION SYSTEM 18-1 SYSTEM DIAGRAM 18-2 IGNITION SYSTEM INSPECTION 18-5 SERVICE INFORMATION 18-3 IGNITION COIL 18-8 TROUBLESHOOTING 18-4

18. IGNITION SYSTEM 18-1 SYSTEM DIAGRAM 18-2 IGNITION SYSTEM INSPECTION 18-5 SERVICE INFORMATION 18-3 IGNITION COIL 18-8 TROUBLESHOOTING 18-4 18. IGNITION SYSTEM SYSTEM DIAGRAM 18-2 SERVICE INFORMATION 18-3 TROUBLESHOOTING 18-4 IGNITION SYSTEM INSPECTION 18-5 IGNITION COIL 18-8 IGNITION TIMING 18-8 18 18-1 IGNITION SYSTEM SYSTEM DIAGRAM IGNITION

More information

Contents. DX Ignition Page 2

Contents. DX Ignition Page 2 Contents 1.0 Intent 2.0 Specifications 3.0 Installation 4.0 Operation Precautions 5.0 Repair 6.0 Parts List 7.0 Glossary of Terms 8.0 Contact Information DX Ignition Page 2 1.0 Intent The purpose of this

More information

DTC P0300 Random / Multiple Cylinder Misfire Detected

DTC P0300 Random / Multiple Cylinder Misfire Detected 162 DTC P0300 Random / Multiple Cylinder Misfire Detected DTC P0301 Cylinder 1 Misfire Detected DTC P0302 Cylinder 2 Misfire Detected DTC P0303 Cylinder 3 Misfire Detected DTC P0304 Cylinder 4 Misfire

More information

Table of contents. Tools by System: Index of tools by Part Number:...P 20. No Year All. Model All

Table of contents. Tools by System: Index of tools by Part Number:...P 20. No Year All. Model All Date : February 9 2007 Subject : Service Tools No 2007-6 Year All Model All BRP is proud to introduce its latest Service Tools Bulletin. These special tools were designed to help you efficiently service

More information

19. IGNITION SYSTEM 19-1 SYSTEM DIAGRAM 19-2 IGNITION SYSTEM INSPECTION 19-5 SERVICE INFORMATION 19-3 CKP SENSOR 19-7 TROUBLESHOOTING 19-4

19. IGNITION SYSTEM 19-1 SYSTEM DIAGRAM 19-2 IGNITION SYSTEM INSPECTION 19-5 SERVICE INFORMATION 19-3 CKP SENSOR 19-7 TROUBLESHOOTING 19-4 19. IGNITION SYSTEM SYSTEM DIAGRAM 19-2 SERVICE INFORMATION 19-3 TROUBLESHOOTING 19-4 IGNITION SYSTEM INSPECTION 19-5 CKP SENSOR 19-7 IGNITION TIMING 19-8 19 19-1 IGNITION SYSTEM IGNITION SYSTEM SYSTEM

More information

C.E. Niehoff & Co. C840D Alternator Troubleshooting Guide CAUTION. Testing Guidelines. Hazard Definitions WARNING.

C.E. Niehoff & Co. C840D Alternator Troubleshooting Guide CAUTION. Testing Guidelines. Hazard Definitions WARNING. C.E. Niehoff & Co. C840D Alternator Troubleshooting Guide WARNING Before troubleshooting any CEN products, the service technician should: read, understand, and agree to follow all information contained

More information

PLATINUM Sport Haltech GM LS1 / LS6 Terminated Engine Harness (HT045650) QUICK START GUIDE

PLATINUM Sport Haltech GM LS1 / LS6 Terminated Engine Harness (HT045650) QUICK START GUIDE PLATINUM Sport 2000 Haltech GM LS1 / LS6 Terminated Engine Harness (HT045650) QUICK START GUIDE LIMITED WARRANTY Lockin Pty Ltd trading as Haltech warrants the Haltech TM Programmable Fuel Injection System

More information

STREET/RACE DISTRIBUTOR

STREET/RACE DISTRIBUTOR Installation Instructions for STREET/RACE DISTRIBUTOR CAUTION: READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION INTRODUCTION The Crane Cams street/race distributor is a high precision system intended

More information

EFI HARNESS KIT , & Kit Contents: Power Harness : All Kits

EFI HARNESS KIT , & Kit Contents: Power Harness : All Kits EFI HARNESS KIT 558-500, 558-501 & 558-502 Kit Contents: Main Harness 558-102: Kits 558-500 558-103: Kits 558-501 & 502 Power Harness 558-308: All Kits Injector Harness 558-200: Kits 558-500 & 502 558-201:

More information

MODULE TEST UNIT. Part No: MTU-12 V2.1

MODULE TEST UNIT. Part No: MTU-12 V2.1 MODULE TEST UNIT Part No: MTU-12 WHITE YEL ORANGE VEHICLE RED 150 Fused + 12 Volt BLACK 150 RED + 12 Volt Out BLACK Out WHITE Pulse ( adjustable by pot) Left High LED will light over 4.5 V Left Low LED

More information

Tachometers and Tach/Hourmeters

Tachometers and Tach/Hourmeters Tachometers and Tach/Hourmeters AT and ATH Series Installation Instructions IMPORTANT! These instructions are specific to tachometer models with a power input operating range of 11-28 VDC and calibration

More information

MIC4 IGNITION CONTROLLER OPERATING MANUAL

MIC4 IGNITION CONTROLLER OPERATING MANUAL MIC4 IGNITION CONTROLLER OPERATING MANUAL MOTORTECH Ignition Controllers P/N 01.10.010-EN Rev. 04/2014 Copyright Copyright 2014 MOTORTECH GmbH. All rights reserved. Distribution and reproduction of this

More information

HOFFMANN POWER PRODUCTS PARTS LIST 2014

HOFFMANN POWER PRODUCTS PARTS LIST 2014 HOFFMANN POWER PRODUCTS PARTS LIST 2014 HOFFMANN CHAINSAW PN7200 ALL PARTS ARE SUBJECT TO STANDARD HOFFMANN TERMS AND CONDITIONS OF SALE 2010 Replacement parts are not manufactured, sold or warranted by

More information

Installation Tips for your Crimestopper/ProStart Remote Start system (add-on for GM vehicles) v1.02 updated 1/16/2013

Installation Tips for your Crimestopper/ProStart Remote Start system (add-on for GM vehicles) v1.02 updated 1/16/2013 Installation Tips for your Crimestopper/ProStart Remote Start system (add-on for GM vehicles) v1.02 updated 1/16/2013 Thank you for purchasing your remote start from MyPushcart.com - an industry leader

More information

Table of contents. Tools by System: Index of tools by Part Number:...P 20. No Year All. Model All

Table of contents. Tools by System: Index of tools by Part Number:...P 20. No Year All. Model All Date : May 9 2013 Subject : Service Tools No 2013-5 Year All Model All BRP is proud to introduce its latest Service Tools Bulletin. These special tools were designed to help you efficiently service BRP

More information

1.7. Portable insulation fault location system EDS3060/EDS3360 in combination with EDS460/461 systems

1.7. Portable insulation fault location system EDS3060/EDS3360 in combination with EDS460/461 systems Portable insulation fault location system EDS3060/EDS3360 in combination with EDS460/461 systems An additional function allows measuring residual currents in earthed power supplies (TN/TT systems) too.

More information

Testing electronic ignition system with variable characteristics EZL

Testing electronic ignition system with variable characteristics EZL 15-1250 Testing electronic ignition system with variable characteristics EZL Operation no. of operation texts and work units or standard texts and flat rates: 15-1250. Connection diagram for engine tester

More information

MSD Stacker-4 (4-Channel), PN 7010 Stacker-8 (8-Channel), PN 7020

MSD Stacker-4 (4-Channel), PN 7010 Stacker-8 (8-Channel), PN 7020 INSTALLATION INSTRUCTIONS 1 MSD Stacker-4 (4-Channel), PN 7010 Stacker-8 (8-Channel), PN 7020 Important: Read these instructions before attempting this installation! Parts Included: 1 - MSD Stacker Ignition

More information

MX2040, DYNAMIC SIGNAL CHECKER Instruction Manual

MX2040, DYNAMIC SIGNAL CHECKER Instruction Manual MX2040, DYNAMIC SIGNAL CHECKER Instruction Manual CONTENTS 1 Warnings 2 Scope of Delivery (ordering code KS04) 3 Technical Data 3.1 Handheld Control Unit 3.2 Vibration Simulator 4 Description of Test Procedure

More information

IGNITION TO INDEX IGNITION SYSTEM (3SZ-VE) OPERATION CHECK... LOCATION... IGNITION SYSTEM (K3-VE) CAM POSITION SENSOR (3SZ-VE) COMPONENTS...

IGNITION TO INDEX IGNITION SYSTEM (3SZ-VE) OPERATION CHECK... LOCATION... IGNITION SYSTEM (K3-VE) CAM POSITION SENSOR (3SZ-VE) COMPONENTS... TO INDEX ENGINE NITION NITION SYSTEM (3SZ-VE) OPERATION CHECK......................................... LOCATION.................................................. NITION SYSTEM (K3-VE) OPERATION CHECK.........................................

More information

DTC P0300 Random/Multiple Cylinder Misfire Detected

DTC P0300 Random/Multiple Cylinder Misfire Detected EINE (5VZFE) DI301 DIB1V01 DTC P0300 Random/Multiple Cylinder Misfire Detected DTC P0301 Cylinder 1 Misfire Detected DTC P0302 Cylinder 2 Misfire Detected DTC P0303 Cylinder 3 Misfire Detected DTC P0304

More information

1 Function Scope of Delivery Mounting Electrical Connections Initial Setup Troubleshooting...

1 Function Scope of Delivery Mounting Electrical Connections Initial Setup Troubleshooting... Elektronik Sachse MHP GmbH & Co. KG Installation Manual Digital Ignition ZDG 3.23 (Ducati Mille) Item: Z73 version: f4feb00 Contents 1 Function.......................................................................

More information

DTC P0300 Random/Multiple Cylinder Misfire Detected

DTC P0300 Random/Multiple Cylinder Misfire Detected DI56 EINE (2RZFE, 3RZFE) DI8ZU01 DTC P0300 Random/Multiple Cylinder Misfire Detected DTC P0301 Cylinder 1 Misfire Detected DTC P0302 Cylinder 2 Misfire Detected DTC P0303 Cylinder 3 Misfire Detected DTC

More information

MIC5 IGNITION CONTROLLER OPERATING MANUAL

MIC5 IGNITION CONTROLLER OPERATING MANUAL MIC5 IGNITION CONTROLLER OPERATING MANUAL MOTORTECH Ignition Controllers P/N 01.10.023-EN Rev. 04/2014 Copyright Copyright 2014 MOTORTECH GmbH. All rights reserved. Distribution and reproduction of this

More information

DTC P0300 Random / Multiple Cylinder Misfire Detected. DTC P0301 Cylinder 1 Misfire Detected. DTC P0302 Cylinder 2 Misfire Detected

DTC P0300 Random / Multiple Cylinder Misfire Detected. DTC P0301 Cylinder 1 Misfire Detected. DTC P0302 Cylinder 2 Misfire Detected 1GR-FE EINE CONTROL SYSTEM SFI SYSTEM 171 DTC P0300 Random / Multiple Cylinder Misfire Detected DTC P0301 Cylinder 1 Misfire Detected DTC P030 Cylinder Misfire Detected DTC P0303 Cylinder 3 Misfire Detected

More information

CAUTION: CAREFULLY READ INSTRUCTIONS BEFORE PROCEEDING

CAUTION: CAREFULLY READ INSTRUCTIONS BEFORE PROCEEDING Daytona Sensors LLC Engine Controls and Instrumentation Systems Installation Instructions for WEGO II Wide-Band Exhaust Gas Oxygen Sensor Interface Methanol Version CAUTION: CAREFULLY READ INSTRUCTIONS

More information

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List Replacement Parts & Accessories Price List 0GC Gas Concrete Saw Effective January, 09 0 ICS, Blount International Inc. Supersedes all previous pricing. Specifications and pricing are subject to change

More information

ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION ON-VEHICLE INSPECTION 1. CHECK IGNITION COIL ASSEMBLY AND PERFORM SPARK TEST (a) Check for DTCs. NOTICE: If any DTC is present, perform troubleshooting in accordance with the procedure for that DTC. (b)

More information

DTC P0300 Random / Multiple Cylinder Misfire Detected. DTC P0301 Cylinder 1 Misfire Detected. DTC P0302 Cylinder 2 Misfire Detected

DTC P0300 Random / Multiple Cylinder Misfire Detected. DTC P0301 Cylinder 1 Misfire Detected. DTC P0302 Cylinder 2 Misfire Detected 1GR-FE EINE CONTROL SYSTEM SFI SYSTEM 169 DTC P0300 Random / Multiple Cylinder Misfire Detected DTC P0301 Cylinder 1 Misfire Detected DTC P0302 Cylinder 2 Misfire Detected DTC P0303 Cylinder 3 Misfire

More information

Installation Instructions

Installation Instructions Installation Instructions CD200EVS Digital Ignition System Form CD200EVS II 8-14 1.0 DESCRIPTION 1.1 This manual provides installation and operating instructions for the Altronic CD200EVS ignition system.

More information

Commander IS0128 ISO128E ECR# /04. Tachometer/ Engine Hourmeter

Commander IS0128 ISO128E ECR# /04. Tachometer/ Engine Hourmeter Commander Tachometer/ Engine Hourmeter Analog Tachometer Digitally displays Hours Engine Has Been Run Fuel Level Other Features if Available: Fuel anagement Fuel Flow in GPH or LPH Total or Trip Fuel Used

More information

AL TRON IC V IGNITION SYSTEM 4400 SERIES - S/N 4400 & UP

AL TRON IC V IGNITION SYSTEM 4400 SERIES - S/N 4400 & UP ALTRONIC V SMALL ENGINES, 1-6 CYLINDERS SERVICE MANUAL FORM AV SM 1-18 AL TRON IC, INC. 71 TRUMBULL AVE. GIRARD, OHIO 4440 AL TRON IC V IGNITION SYSTEM 4400 SERIES - S/N 4400 & UP IMPORTANT SAFETY NOTICE

More information

GENSET CONTROL MODULE A121A / A241A

GENSET CONTROL MODULE A121A / A241A Technical Data Sheet GENSET CONTROL MODULE A121A / A241A Features: Models for both 12V and 24V systems. One model for both spark ignition and diesel engines. 4-alarm light outputs with lamp-test provisions.

More information