Solar & Roller Shades

Size: px
Start display at page:

Download "Solar & Roller Shades"

Transcription

1 STEP BY STEP INSTALLATION INSTRUCTIONS Solar & Roller Shades Loop Control, Loop Control with Cassette/2 on 1 Headrail & Loop Control with Metal Valance

2 Table of Contents Step 1 - Getting Started....3 Everything You Need A Smooth Set-Up We want you to love your new window coverings and that includes having a smooth installation experience. If you encounter any difficulties or questions, please reach out to us for help. It s why we re here. Call us at or visit for more info on installation. We recommend you hold on to all packaging until your window coverings are fully installed. Should something go wrong (we strongly doubt it), we want any potential returns to be as painless as possible. Customer Service Hours Monday Friday: 6am 7pm PT Saturday Sunday: 7am 4pm PT Overview - Loop Control....4 Step 2 - Mounting the Brackets...5 Step 3 - Hanging the Shade...6 Step 4 - Installing Cord Tensioner...7 Step 5 - Operating the Shade....8 Overview - Loop Control with Decorative Cassette/2 on 1 Headrail...9 Step 2 - Mounting the Brackets Step 3 - Hanging the Shade Removing the Shade Step 4 - Installing Cord Tensioner Step 5 - Operating the Shade Overview - Loop Control with Metal Valance Step 2 - Mounting the Brackets Step 3 - Hanging the Shade Step 4 - Attaching the Valance Step 5 - Installing Cord Tensioner Step 6 - Operating the Shade Optional Skew Adjustment Hold Down Brackets Troubleshooting Care & Cleaning Instructions Safety Warranty...Back Cover smithandnoble.com 1 smithandnoble.com

3 Step 1 Parts & Tools Overview Getting Started Loop Control No Headrail First, make sure you have all the parts and tools required to install your shades. ALL THE HARDWARE YOU LL NEED: Pencil, screw-driver, ¼ nut driver, level, and a drill with a 1 16 drill bit. Clutch Then find wooden studs where you ll want to attach the brackets; if you need to mount your shades to wallboard or plaster, use a secure fastener designed for hollow wall applications. For metal surfaces, pre-drill holes and use the included screws. For concrete, stone, brick, or tile surfaces, use a masonry drill and appropriate plugs, anchors, or screws. It s important when selecting a fastener to make sure it s designed to support the weight of the shade. Follow the fastener manufacturer s instruction from there on out. Cord Tensioner SCREWS CASSETTE BRACKET EXTENSION & SIDE BRACKET (OPTIONAL) BRACKET FOR SHADES WITHOUT HEADRAIL NO HEADRAIL BRACKET COVERS OUTSIDE MOUNT (OPTIONAL FOR INSIDE MT) SPACER BLOCK (OPTIONAL) Bottom Bar BRACKETS FOR SHADES WITH METAL VALANCE METAL VALANCE BRACKET COVER (OUTSIDE MOUNT ONLY) METAL VALANCE CLIP HOLD DOWN BRACKET (OPTIONAL) PENCIL & SCREWDRIVER (NOT INCLUDED) POWER DRILL & LEVEL (NOT INCLUDED) 3 smithandnoble.com

4 Step 2 Mounting Brackets Step 3 Hanging the Shade Inside Mount The installation brackets are always mounted so that the short legs face in. Brackets must be in line and level. Shim brackets on inside mounts if necessary. The roller must be level for No Headrail Brackets Hanging Shades without Headrail Once the brackets are secured and level, the fabric roll can be inserted. Make sure your hands are clean to avoid soiling the fabric. the shade to operate properly. Attach each bracket using two screws either up through the top (A) or through the side (B). A B Be sure the clutch and roller end plug are inserted into the roller. Hold the shade with the bottom of the clutch facing the floor, and the beaded cord hanging straight down. Be sure the Inside Mount No Headrail with Bracket Covers Place the brackets 1 16" from the window casing. This will create a gap for the bracket cover. Attach each bracket using two screws through the top holes. Do not use side holes. 1/16" Gap No Headrail No Headrail with Bracket Covers No Headrail shade is fully rolled on the tube. Insert the spring loaded pin end into the round hole of the bracket. Push the clutch end toward the pin end to compress the spring. The pin should compress half way in for best fit. Line up the hooks on the clutch with the two slots in the bracket. Allow the spring to release and let the hooks go into the slots. Once the two hooks are through the Outside Mount The installation brackets are always mounted so that the short legs face in. Brackets must be in line and level. The roller must be level for the shade to operate properly. First, hold the shade above the window so that it s perfectly centered over the window opening at the desired height. Mark the position of the brackets on the wall. Mount the brackets to the wall. Make sure the mounting brackets are level. Attach each bracket using two screws. No Headrail Outside Mount slots, gently pull down on the clutch until the hooks lock securely to the bracket. Bracket covers come standard for outside mount shades and if requested for non-flush inside mounted shades. If your shade came with bracket covers, slide the bracket covers over the bracket until they snap into place. 5 smithandnoble.com

5 Step 4 Installing Cord Tensioner Step 5 Operating the Shade Installing Cord Tensioner Loop Control Your window shade has arrived with a cord tensioner to comply with current child safety standards. The cord tensioner must be mounted and secured before the window shade will operate correctly. Before doing anything, you must first slide the tension device to the bottom of the bead chain. While holding the tension device in one hand, pull the plunger away from the bead chain with the other hand. Lift the bead chain out of the bead locking groove and slide the tension device to the bottom of the chain loop. Plunger Bead locking grove Rear Bead Chain Front Bead Chain Opening and closing your new Smith & Noble shades is entirely hassle-free. Using the loop control, pull the rear bead chain to lower the shade and, pull the front bead chain to raise. If shade was ordered as a reverse roll, the front cord will lower the shade and the back cord will raise the shade. Pull the tension device down until the bead chain is fully tensioned (plunger will be at the top) and then Plunger Location move the tension device up approximately 1 8". Mark the screw hole locations on the wall with a pencil. INSIDE MOUNT If mounting into wood, pre-drill screw holes and then install the tension device using the 2 large screws proviced. If not securing into wood, use appropriate anchors for the substrate and follow anchor manufacturer's instructions. OUTSIDE MOUNT Align the mounting bracket sight holes with the pencil marks. Sight hole If mounting into wood, pre-drill screw holes and then install the mounting bracket using Screw hole the 2 large screws proviced. If not securing into wood, use appropriate anchors for the substrate and follow anchor manufacturer's instructions. Press the tension device onto the mounting bracket posts. Carefully install the 2 small screws provided, through the tension device into the mounting bracket using a phillips head screwdriver. DO NOT OVER-TIGHTEN. Post 7 smithandnoble.com

6 Overview Step 2 Mounting Brackets Loop Control with Decorative Cassette/2 on 1 Headrail Decorative Cassette 2" Inside Mount Center the shade in the window frame. Mark the position of the brackets. End brackets should be located 2" in from each end. Mount the brackets to the top of the window frame. Make sure the brackets are aligned. Space additional brackets evenly between two end brackets. Attach brackets using two screws. Cord Tensioner BRACKET QTY SHADE WIDTH Bottom Bar Extension Bracket Mounting Bracket Side Mount (optional) Measure from window sill up to desired mounting position. Mount side mount brackets on each side of window frame as shown. Make sure to confirm that headrail will sit perfectly level. Once side mount brackets are installed and properly positioned, attach the Standard Mounting Brackets using the nuts and bolts provided. 2 up to 40" 3 40" 72" 4 72" 84" 5 84" and up 2 on 1 Headrail with Loop Control 9 smithandnoble.com

7 Step 2 Mounting Brackets Step 3 Removing the Shade Outside Mount First, hold the shade above the window so that it s perfectly centered over the window opening at the desired height. Mark the position of the brackets on the wall. End brackets should be located 2" Headrail Mounting Brackets Removing the Shade To remove the shade, partially lower the shade and insert a flat head screwdriver as shown. Twist the screwdriver until the headrail disengages from the bracket. 2" from each end. Mount the brackets to the wall. Make sure the mounting brackets are level. If needed, space additional brackets evenly between two Step 4 Installing Cord Tensioner end brackets. Attach each bracket using two screws. Installing Cord Tensioner Spacer Blacks (Optional) Each spacer black projects brackets 3/8" away from mounting surface. Position spacer block behind mounting bracket, make sure the brackets are level and aligned. Attach each bracket using two screws. Screws should be long enough to secure the bracket to the mounting surface. Plunger Bead locking grove Your window shade arrived with a cord tensioner to comply with current child safety standards. The cord tensioner MUST be mounted and secured before the window shade will operate correctly. Please see installing cord tensioner on p7. Extension Brackets (optional) Extension Bracket Optional Extension Brackets are used to project the back of the shade up to 2 1 2" from the mounting surface. Attach the Standard Mounting Bracket to the Extension Bracket with the nut and bolt provided. Step 3 Hanging the Shade Rear Bead Chain Step 5 Operating your Shade Front Bead Chain Operating your Shade Opening and closing your new Smith & Noble shades is entirely hassle-free. Using the loop control, pull the rear bead chain to lower the shade and the front bead chain to raise. Hanging the Shade Insert the rail into the opening of the bracket. Push the rail back until it is fully engaged. 11 smithandnoble.com

8 Overview Step 2 Mounting Brackets Loop Control with Metal Valance Metal Valance A B Inside Mount The installation brackets are always mounted so that the short legs face in. Brackets must be in line and level. Shim brackets on inside mounts if necessary. The roller must be level for the shde to operate properly. Attach each bracket using two screws either up through the top (A) or through the side (B). Brackets are mounted with the open end down. Inside Mount Cord Tensioner Outside Mount Mount to wall or window frame. Make sure the mounting brackets are level. The brackets are always mounted so that the inner surfaces face each other. Brackets are mounted with the open end down. Bottom Bar Outside Mount 13 smithandnoble.com

9 Step 3 Hanging the Shade Step 5 Installing Cord Tensioner Hanging the Shade Once the brackets are secured and level, the fabric roll can be inserted. Make sure your hands are clean to avoid soiling the fabric. Be sure the clutch and roller end plug are inserted into the roller. Hold the shde with the bottom of the clutch facing the floor, and the beaded cord hanging straight down. Be sure the shade is fully rolled on the tube. Insert the spring loaded pin end into the round hole of the bracket. Plunger Bead locking grove Installing Cord Tensioner Your window shade arrived with a cord tensioner to comply with current child safety standards. The cord tensioner MUST be mounted and secured before the window shade will operate correctly. Please see installing cord tensioner on p7. Step 6 Operating your Shade Push the clutch end toward the pin end to compress the spring. The pin should compress half way in for best fit. Line up the hooks on the clutch with the two slots in the bracket. Allow the spring to release and let the hooks go into the slots. Once the two hooks are through the slots, gently pull down on the clutch until the hooks lock securely to the bracket. Rear Bead Chain Front Bead Chain Operating your Shade Opening and closing your new Smith & Noble shades is entirely hasslefree. Using the loop control, pull the rear bead chain to lower the shade and, the front bead chain to raise. Step 4 Attaching the Valance Attaching the Valance Insert a valance clip into the bottom front keyhole slot of each bracket. Press the bottom firmly to lock into place. Hold the valance on the top of the bracket first, and rotate downward. Press until the bottom hook feature on the valance engages and is locked to the valance clip. Press Pull "L" portion of valance Locked Bracket Covers - Outside Mount Only Press the covers onto the brackets as shown. 15 smithandnoble.com

10 Optional Troubleshooting Skew Adjustment PROBLEM SOLUTION If the shade does not raise evenly, first make sure the mounting brackets are mounted level with each other. If the shade is level and it still skews, operate the shade to the full down position. Prepare a strip of masking tape approximately 5 long. On the side of the shade opposite of the skewing direction, and as close to the end of the roller as possible, lift the fabric toward the back of the shade using your fingers and slide the tape with the sticky side facing the roller up as far as possible. The tape is to be running parallel to the roller. Roll the shade up and check for skewing. If the shade is still skewing, add another strip of tape on top of the first one. If the shade is now skewing in the opposite direction, tear off about 1 of tape from the last strip installed. The tape is to be torn from the end closest to the center of the shade. If these suggestions don t work, then please give us a call or visit our website. Hold Down Bracket Optional Hold Down Brackets are mounted with the supplied screws. With the shade at its proper drop, place the pin of each Hold Down into the hole in each End Cap and make sure the pins are level and aligned. Mark the screw holes with a pencil. Raise the shade, then screw the Hold Down Bracket into the mounting surface. Hold Down Bracket Fabric Roll Place tape at this end Make sure the mounting brackets are The shade fabric does not roll up evenly aligned and level with one another. The shade may be caught on an obstruction The shade will not raise such as a window crank or latch; if this is the case feel free to untangle. If these suggestions don t work, then please give us a call or visit our website. Care & Cleaning Care & Cleaning /Safety Use brush or dust head attachment. Occasional light vacuuming with a soft bristle attachment or gentle feather dusting is all that is required to keep your shades looking fresh and neat. Safety First. Style Second To None. Great style should never come at the cost of safety. Every Smith & Noble window treatment conforms strictly to today s safety standards, including permanent tiedown devices and built-in cord stops. To protect young children and pets, Loop Control works with a cord tensioner, which must be mounted to your window frame or wall. The shade or blind will not work if the cord tensioner is not mounted. Child Safety 17 smithandnoble.com

11 Warranty Service The enjoyment of your window coverings should be everlasting, which is why our products come with a limited lifetime warranty. The warranty applies to the original owner, requires a proof of purchase and covers defects in material or craftsmanship. Shades or blinds must have been properly installed. We reserve the right to determine if your window covering warrants a repair or a replacement. In need of warranty service? Call us at and we ll arrange for a repair or replacement ASAP Smith & Noble Home, Inc. All Rights Reserved SN2036 SN_RS_L_2017_1

12 STEP BY STEP INSTALLATION INSTRUCTIONS Solar & Roller Shades Motivia Motorization Wand Control

13 Everything You Need A Smooth Set-Up We want you to love your new window coverings and that includes having a smooth installation experience. If you encounter any difficulties or questions, please reach out to us for help. It s why we re here. Call us at or visit for more info on installation. We recommend you hold on to all packaging until your window coverings are fully installed. Should something go wrong (we strongly doubt it), we want any potential returns to be as painless as possible. Customer Service Hours Monday Friday: 6am 7pm PT Saturday Sunday: 7am 4pm PT Table of Contents. Step 1 - Getting Started....3 Overview - Motorization with No Headrail...4 Step 2 - Mounting the Brackets...5 Step 3 - Attaching the Wand....6 Step 4 - Hanging the Shade...7 Overview - Motorization with Cassette/2 on 1 Headrail....9 Step 2 - Mounting the Brackets Step 3 - Hanging the Shade Overview - Motorization with Metal Valance Step 2 - Mounting the Brackets Step 3 - Attaching the Wand Step 4 - Hanging the Shade Step 5 - Attaching the Valance Operating the Wand Control Adjusting Shade Limits Optional Hold down brackets Skew Adjustment Charging the Shade Troubleshooting Care & Cleaning...Back Cover Safety...Back Cover Warranty...Back Cover smithandnoble.com 1 smithandnoble.com

14 Step 1 Parts & Tools Overview Getting Started First, make sure you have all the parts and tools required to install your shades. Motorization with No Headrail - Wand Control Bracket ALL THE HARDWARE YOU LL NEED: Pencil, screw-driver, ¼ nut driver, level, and a drill with a 1 16 drill bit. Bracket Roller Shade Then find wooden studs where you ll want to attach the brackets; if you need to mount your shades to wallboard or plaster, use a secure fastener designed for hollow wall applications. For metal surfaces, pre-drill holes and use the included screws. For concrete, stone, brick, or tile surfaces, use a masonry drill and appropriate plugs, anchors, or screws. It s important when selecting a fastener to make sure it s designed to support the weight of the shade. Follow the fastener manufacturer s instruction from there on out. Wand SCREWS 1/2" SCREWS CASSETTE MOUNTING BRACKET EXTENSION & SIDE BRACKET (OPTIONAL) CABLE TIES CABLE TIE MOUNTING BASE BRACKET FOR SHADES WITHOUT HEADRAIL NO HEADRAIL BRACKET COVERS OUTSIDE MOUNT (OPTIONAL FOR INSIDE MT) METAL VALANCE CLIP SPACER BLOCK (OPTIONAL) Bottom Bar BRACKETS FOR SHADES WITH METAL VALANCE METAL VALANCE BRACKET COVER (OUTSIDE MOUNT ONLY) MOTOR ADAPTER CHARGER HOLD DOWN BRACKET (OPTIONAL) PENCIL & SCREWDRIVER (NOT INCLUDED) POWER DRILL & LEVEL (NOT INCLUDED) 3 smithandnoble.com

15 Step 2 Mounting Brackets Step 3 Attaching the Wand Inside Mount Wiring Attaching the Wand The installation brackets are always mounted so that the short legs face in. Brackets must be in line and level. Shim brackets on inside mounts if necessary. The roller must be level for the shade to operate properly. Attach each bracket using two screws either up through the top (A) or through the side (B). Inside Mount No Headrail with Bracket Covers No Headrail A No Headrail B Motor adapter Wand holder While holding wires in the channel of the wand holder, use a #2 Philips head screwdriver to attach the motor adaptor and the wand holder to the end of the motor with the 1/2" screws provided. Be sure that the wires are not twisted or pinched. Plug the control wire into the wand wire. The plugs will only fit together one way. Place the brackets 1/16" from the window casing. This will create a gap for the bracket cover. Attach each bracket using two through the top holes. Do not use side holes. 1/16" Gap No Headrail with Bracket Cover Outside Mount The installation brackets are always mounted so that the short legs face in. Brackets must be in line and level. The roller must be level for the shade to operate properly. First, hold the shade above the window so that it's perfectly centered over the window opening at the desired height. Mark the position of the brackets on the wall. Mount the brackets to the wall. Make sure the mounting brackets are level. No Headrail 5 smithandnoble.com

16 Step 4 Hanging the Shade Step 4 Bracket Cover Hanging Shades without Headrail Once the brackets are secured and level, the fabric roll can be inserted. Make sure your hands are clean to avoid soiling the shade. Be sure the motor and roller end plug are inserted into the roller. Bracket Cover Bracket covers come standard for outside mount shades and if requested for non-flush inside mounted shades. If your shade came with bracket covers, slide the bracket covers over the bracket until they snap into place. Hold the shade with the bottom of the motor facing the floor. Be sure the shade is fully rolled on the tube. Insert the spring loaded pin end into the round hole of the bracket. Push the motor end toward the pin end to compress the spring. The pin should compress half way in for best fit. Line up the hooks on the motor with the two slots in the bracket. Allow the spring to release and let the hooks go into the slots. Once the two hooks are through the slots, gently pull down on the motor until the hooks lock securely to the bracket. 7 smithandnoble.com

17 Overview Step 2 Mounting Brackets Motorization with Cassette - 2 on 1 Headrail, with Wand Control 2" Inside Mount Center the shade in the window frame. Mark the position of the brackets. End brackets should be located 2" in from each end. Mount the brackets to the top of the window frame. Make sure the brackets are aligned. Space additional brackets evenly between two end brackets. Shade with Wand Control Side Mount (optional) Measure from window sill up to desired mounting position. Mount Side Mount Brackets on each side of window frame as shown. Make sure to confirm that headrail will sit perfectly level. Once Side Mount Brackets are installed and properly positioned, attach the Standard Mounting Brackets using the nuts and bolts provided. 2 on 1 Headrail with Wand Control 9 smithandnoble.com

18 Step 2 Mounting Brackets Step 3 Hanging the Shade Outside Mount First, hold the shade above the window so that it s perfectly centered over the window opening at the desired height. Mark the position of the bracket on the wall. End brackets should be located 2" from each end. Mount the brackets to the wall. Make sure the mounting brackets are level. If needed, space additional brackets evenly between two end brackets. 2" Mounting Brackets Headrail Hanging the Shade Insert the rail into the opening of the bracket. Push the rail back until it is fully engaged. Extension Brackets (optional) Optional Extension Brackets are used to project the back of the shade up to 2 1 2" from the mounting surface. Attach the Standard Mounting Bracket to the Extension Bracket with the nut and bolt provided. Extension Bracket Spacer Blocks (Optional) Each spacer block projects brackets 3/8" away from mounting surface. Position spacer block behind mounting bracket, make sure the brackets are level and aligned. Attach each bracket using two screws. Screws should be long enough to secure the bracket to the mounting surface. Removing the Shade To remove the shade, partially lower the shade and insert a flat head screwdriver as shown. Twist the screwdriver until the headrail disengages from the bracket. 11 smithandnoble.com

19 Overview Step 2 Mounting Brackets Motorized with Metal Valance - Wand Control Metal Valance Inside Mount The installation brackets are always mounted so that the rounded edge faces down. Brackets must be in line and level. Shim brackets on inside mounts if necessary. The roller must be level for the shade to operate properly. B Attach each bracket using two screws either up through the top (A) or through the side (B). A Inside Mount Outside Mount The installation brackets are always mounted so that the rounded edge faces down. Brackets must be in line and level. The roller must be level for the shade to operate properly. The brackets can be mounted to wall or window frame. Make sure the mounting brackets are level. The brackets are always mounted so that the inner surfaces face each other. Brackets are mounted with the open end down. Outside Mount 13 smithandnoble.com

20 Step 3 Attaching the Wand Step 4 Hanging the Shade Wiring Motor adapter Wand holder Attaching the Wand While holding wires in the channel of the wand holder, use a #2 Philips head screwdriver to attach the motor adaptor and the wand holder to the end of the motor with the 1/2" screws provided. Be sure that the wires are not twisted or pinched. Plug the control wire into the wand wire. The plugs will only fit together one way. Hanging the Shade Once the brackets are secured and level, the fabric roll can be inserted. Make sure your hands are clean to avoid soiling the fabric. Be sure the motor and roller end plug are inserted into the roller. Hold the shade with the bottom of the motor facing the floor. Be sure the shade is fully rolled on the tube. Insert the spring loaded pin end into the round hole of the bracket. Push the motor end toward the pin end to compress the spring. The pin should compress half way in for best fit. Line up the hooks on the motor with the two slots in the bracket. Allow the spring to release and let the hooks go into the slots. Once the two hooks are through the slots, gently pull down on the motor until the hooks lock securely to the bracket. 15 smithandnoble.com

21 Step 5 Attaching the Valance Operating the Wand Control Attaching the Valance Wand Controls Insert a valance clip into the bottom front keyhole slot of each bracket. Press the bottom firmly to lock into place. Hold the valance on the top of the bracket first, and rotate downward. Up Press the DOWN or UP button to lower or raise the shade. Press the STOP button to stop the shade at the desired position. To fully raise or lower the shade, simply press the UP or DOWN button and then release. The shade will automatically stop Press until the bottom hook feature on the valance engages and is locked to the valance clip. Press Pull "L" portion of valance Locked Stop/Favorite Down when it reaches the upper or lower limit. (If the upper or lower limits are not set at the desired positions, see the Adjust Motor Limits section on the next page) Bracket Covers - Outside Mount Only Press the covers onto the brackets as shown. Note: Upper and lower limits stops are set at the factory. An intermediate, or "favorite" position is not set at the factory. See page 19 for more information. 17 smithandnoble.com

22 Adjusting Shade Limits Optional Adjust Motor Limits (If Desired) The upper and lower limits stops have been set at the factory. If you need to make adjustments to the limits, follow the instructions below. Press the SETTING button on the back of the wand and hold it in until the motor stops beeping. This will clear both the upper and lower factory limits and the favorite if one was set. Set Upper Limit - Press the UP button to get the shade close to the desired upper limit and then press STOP button to stop the shade. Tap the UP or DOWN button to move the shade to the desired position. To save the location, press the SETTING button until the motor beeps. Setting Button Up Stop/Favorite Hold Down Bracket Hold Down Bracket Optional Hold Down Brackets are mounted with the supplied screws. With the shade at its proper drop, place the pin of each Hold Down into the hole in each End Cap and make sure the pins are level and aligned. Raise the shade, then screw the Hold Down Bracket into the mounting surface. Skew Adjustment If the shade does not raise evenly, first make sure the mounting brackets are mounted level with each other. If the shade is level and it still skews. use the Skew Adjustment Kit included with your shade to adjust the skewing. Set Lower Limit - Press the DOWN button to get the shade close to the desired lower limit and then press the STOP button to stop the shade. Tap the UP or DOWN button to move the shade to the desired position. To save the location, press the SETTING button until the motor beeps. Down If these suggestions don t work, then please give us a call or visit our website. Favorite Position Setting and Using a Favorite Position - Use the UP or DOWN buttons to position the shade at the desired "favorite" position. First press and hold the SETTING button the back of the wand. While holding the SETTING button, press and hold the UP button. Release both buttons when the shade beeps. With the shade at either the upper or lower limit, simply press the STOP/ FAVORITE button to bring the shade to the "favorite" position. To go to the "favorite" position from any other location, make sure the shade has been stopped for at least three seconds before pressing the STOP/FAVORITE button. Changing a Favorite Position - Use the UP or DOWN buttons to position the shade at the new desired "favorite" position. First press and hold the SETTING button on the back of the wand. While holding the SETTING button, press and hold the UP button. Release both buttons when the shade beeps. This establishes a new "favorite" position and erase the old. 19 smithandnoble.com

23 Charging the Shade Troubleshooting When the shade begins to operate slower than normal, or only beeps when you attempt to operate, it is time to charge the battery. PROBLEM The shade does not work or runs slowly. Recharge the motor. SOLUTION Plug the 8.4v charger into the port on the wand. Plug the charger into an electrical outlet. A red light on the charger indicates that the battery is charging. To fully charge the batteries, allow the batteries to charge for at least 1 hour after the light on the charger turns green. Charging Port The shade only goes in one direction (up or down). Shade goes up when the down button is pushed and goes down when the up button is pushed. The limit setting was unsuccessful and needs to be reset. See Adjusting Shade Limits pgs Press the SETTING button and STOP button at the same time. Hold until the shade jogs once. The shade should now move in the correct direction. A typical charge cycle can take between 4-6 hours. The motor beeps when operated Recharge the motor. If these suggestions don t work, then please give us a call or visit our website. 21 smithandnoble.com

24 Care & Cleaning /Safety Care & Cleaning Occasional light vacuuming with a soft bristle attachment or gentle feather dusting is all that is required to keep your shades looking fresh and neat. Safety First. Style Second To None Great style should never come at the cost of safety. Every Smith & Noble window treatment conforms strictly to today s safety standards, including permanent tie-down devices and built-in cord stops. To protect young children and pets, there s no better way to eliminate risk than to use one of our cordless products. Child Safety Warranty Service The enjoyment of your window coverings should be everlasting, which is why our products come with a limited lifetime warranty. The warranty applies to the original owner, requires a proof of purchase and covers defects in material or craftsmanship. Shades or blinds must have been properly installed. We reserve the right to determine if your window covering warrants a repair or a replacement. In need of warranty service? Call us at and we ll arrange for a repair or replacement ASAP Smith & Noble Home, Inc. All Rights Reserved SN2046 SN_RS_M_W_2017_2

25 STEP BY STEP INSTALLATION INSTRUCTIONS Solar & Roller Shades Motivia Motorization Remote Control

26 Everything You Need Table of Contents Step 1 - Getting Started....3 Overview - Motorization with No Headrail...4 Step 2 - Mounting the Brackets...5 Step 3 - Hanging the Shade...6 A Smooth Set-Up We want you to love your new window coverings and that includes having a smooth installation experience. If you encounter any difficulties or questions, please reach out to us for help. It s why we re here. Call us at or visit for more info on installation. We recommend you hold on to all packaging until your window coverings are fully installed. Should something go wrong (we strongly doubt it), we want any potential returns to be as painless as possible. Customer Service Hours Monday Friday: 6am 7pm PT Saturday Sunday: 7am 4pm PT Overview - Motorization with Cassette/2 on 1 Headrail....7 Step 2 - Mounting the Brackets Step 3 - Hanging the Shade Overview - Motorization with Metal Valance Step 2 - Mounting the Brackets Step 3 - Hanging the Shade Step 4 - Attaching the Valance Linking the Remote Operating the Remote Controls Optional Hold down brackets Skew Adjustment Recharging the Shade Care & Cleaning Instructions Safety Troubleshooting Warranty...Back Cover smithandnoble.com 1 smithandnoble.com

27 Step 1 Parts & Tools Overview Getting Started First, make sure you have all the parts and tools required to install your shades. Motorization with No Headrail - Remote Control Bracket ALL THE HARDWARE YOU LL NEED: Pencil, screw-driver, ¼ nut driver, level, and a drill with a 1 16 drill bit. Bracket Roller Shade Then find wooden studs where you ll want to attach the brackets; if you need to mount your shades to wallboard or plaster, use a secure fastener designed for hollow wall applications. For metal surfaces, pre-drill holes and use the included screws. For concrete, stone, brick, or tile surfaces, use a masonry drill and appropriate plugs, anchors, or screws. It s important when selecting a fastener to make sure it s designed to support the weight of the shade. Follow the fastener manufacturer s instruction from there on out. SCREWS CASSETTE MOUNTING BRACKET EXTENSION & SIDE BRACKET (OPTIONAL) BRACKETS FOR DUAL ROLLER SHADES BRACKET FOR SHADES WITHOUT HEADRAIL NO HEADRAIL BRACKET COVERS OUTSIDE MOUNT (OPTIONAL FOR INSIDE MT) METAL VALANCE CLIP SPACER BLOCK (OPTIONAL) Bottom Bar BRACKETS FOR SHADES WITH METAL VALANCE METAL VALANCE BRACKET COVER (OUTSIDE MOUNT ONLY) HOLD DOWN BRACKET (OPTIONAL) REMOTE CONTROL CHARGER PENCIL & SCREWDRIVER (NOT INCLUDED) POWER DRILL & LEVEL (NOT INCLUDED) 3 smithandnoble.com

28 Step 2 Mounting Brackets Step 3 Hanging the Shade Inside Mount Hanging Shades without Headrail The installation brackets are always mounted so that the short legs face in. Brackets must be in line and level. Shim brackets on inside mounts if necessary. The roller must be level for the shade to operate properly. Attach each bracket using two screws either up through the top (A) or through the side (B). Inside Mount No Headrail with Bracket Covers Place the brackets 1/16" from the window casing. This will create a gap for the bracket cover. Attach each bracket using two through the top holes. Do not use side holes. Outside Mount The installation brackets are always mounted so that the short legs face in. Brackets must be in line and level. The roller must be level for the shade to operate properly. 1/16" Gap No Headrail A No Headrail B Dual Roller No Headrail with Bracket Cover A Dual Roller B No Headrail Once the brackets are secured and level, the fabric roll can be inserted. Make sure your hands are clean to avoid soiling the shade. Be sure the motor and roller end plug are inserted into the roller. Hold the shade with the bottom of the motor facing the floor. Be sure the shade is fully rolled on the tube. Insert the spring loaded pin end into the round hole of the bracket. Push the motor end toward the pin end to compress the spring. The pin should compress half way in for best fit. Line up the hooks on the motor with the two slots in the bracket. Allow the spring to release and let the hooks go into the slots. Once the two hooks are through the slots, gently pull down on the motor until the hooks lock securely to the bracket. Bracket Cover Bracket covers come standard for outside mount shades and if requested for non-flush inside mounted shades. If your shade came with bracket covers, slide the bracket covers over the bracket until they snap into place. First, hold the shade above the window so that it's perfectly centered over the window opening at the desired height. Mark the position of the brackets on the wall. Mount the brackets to the wall. Make sure the mounting brackets are level. No Headrail Room Side Dual Roller Shades Install shades into the dual roller brackets in the same manner as above. Make sure that the fabric on the lower shade rolls off the back of the roller (standard roll) and that the fabric on the upper front shade rolls off the front of the roller (reverse roll). 5 smithandnoble.com

29 Overview Step 2 Mounting Brackets Motorization with Cassette - 2 on 1 Headrails, Remote Control Decorative Cassette 2" Inside Mount Center the shade in the window frame. Mark the position of the brackets. End brackets should be located 2" in from each end. Mount the brackets to the top of the window frame. Make sure the brackets are aligned. Space additional brackets evenly between two end brackets Bottom Bar Remote Control Side Mount (optional) Measure from window sill up to desired mounting position. Mount Side Mount Brackets on each side of window frame as shown. Make sure to confirm that headrail will sit perfectly level. Once Side Mount Brackets are installed and properly positioned, attach the Standard Mounting Brackets using the nuts and bolts provided. 2 on 1 Headrail with Remote Control 7 smithandnoble.com

30 Step 2 Mounting Brackets Step 3 Hanging the Shade Outside Mount First, hold the shade above the window so that it s perfectly centered over the window opening at the desired height. Mark the position of the bracket on the wall. End brackets should be located 2" from each end. Mount the brackets to the wall. Make sure the mounting brackets are level. If needed, space additional brackets evenly between two end brackets. 2" Mounting Brackets Headrail Hanging the Shade Insert the rail into the opening of the bracket. Push the rail back until it is fully engaged. Extension Brackets (optional) Optional Extension Brackets are used to project the back of the shade up to 2 1 2" from the mounting surface. Attach the Standard Mounting Bracket to the Extension Bracket with the nut and bolt provided. Extension Bracket Spacer Blocks (Optional) Each spacer block projects brackets 3/8" away from mounting surface. Position spacer block behind mounting bracket, make sure the brackets are level and aligned. Attach each bracket using two screws. Screws should be long enough to secure the bracket to the mounting surface. Removing the Shade To remove the shade, partially lower the shade and insert a flat head screwdriver as shown. Twist the screwdriver until the headrail disengages from the bracket. 9 smithandnoble.com

31 Overview Step 2 Mounting Brackets Motorized with Metal Valance - Remote Control Metal Valance Inside Mount The installation brackets are always mounted so that the rounded edge faces down. Brackets must be in line and level. Shim brackets on inside mounts if necessary. The roller must be level for the shade to operate properly. B Attach each bracket using two screws either up through the top (A) or through the side (B). A Inside Mount Outside Mount The installation brackets are always mounted so that the rounded edge faces down. Brackets must be in line and level. The roller must be level for the shade to operate properly. Bottom Bar Outside Mount The brackets can be mounted to wall or window frame. Make sure the mounting brackets are level. The brackets are always mounted so that the inner surfaces face each other. Brackets are mounted with the open end down. REMOTE CONTROL 11 smithandnoble.com

32 Step 3 Hanging the Shade Step 4 Attaching the Valance Hanging the Shade Attaching the Valance Once the brackets are secured and Insert a valance clip into the bottom level, the fabric roll can be inserted. front keyhole slot of each bracket. Make sure your hands are clean to avoid soiling the fabric. Press the bottom firmly to lock into place. Be sure the motor and roller end plug are inserted into the roller. Hold the shde with the bottom of the motor facing the floor. Be sure the shade is fully rolled on the tube. Hold the valance on the top of the bracket first, and rotate downward. Press until the bottom hook feature on the valance engages and is locked to the valance clip. Press Pull "L" portion of valance Locked Insert the spring loaded pin end into the round hole of the bracket. Push the motor end toward the pin end to compress the spring. The pin should compress half way in for best Bracket Covers - Outside Mount Only Press the covers onto the brackets as shown. fit. Line up the hooks on the motor with the two slots in the bracket. Allow the spring to release and let the hooks go into the slots. Once the two hooks are through the slots, gently pull down on the motor until the hooks lock securely to the bracket. 13 smithandnoble.com

33 Link the Remote Control Operating the Remote Control Link the Remote Control For added protection, your remote control arrived with a protective film on the top. Please remove this film prior to use. The remote control has multiple channels. Before linking the remote, determine which shade(s) you want on which channel. The standard remote has 5 channels. All shades linked to the remote will also automatically be programmed to the "ALL" channel. Shade Motor Charging Port Setting (Red Button) Channel Display Up Stop Down Channel + Channel Remote Control Select the desired channel with the CHANNEL key. The channel indicator light will illuminate the channel that is on. If all 5 lights are lit, the remote will control all 5 channels at once. Tapping the UP or DOWN keys for less than 2 seconds will move the shade in short steps. Holding the UP or DOWN keys down for more than 2 seconds before releasing, will operate the shade in the faster standard speed. 1. Press the SETTING button on the motor until the shade jogs twice. Release the button immediately after the first jog this should not be more than 3 seconds. 2. Select the channel that you want to program using the CHANNEL selector button. 3. Press and hold the CONFIRM btuuon until the shade(s) jogs once. The shade is now linked to the remote. 4. Repeat steps 1-3 to program the rest of the shades. Front of Remote C L Limit Button Confirm Button Press the UP or DOWN keys to raise or lower the shade. Press the STOP key to stop the shade anywhere along the window. Setting and Using a Favorite Position: Use the UP or DOWN buttons to position the shade at the desired favorite position. First press and hold the LIMIT button on the back of the remote with a small screwdriver or tip of a pen. While holding the LIMIT button press and hold the UP button. Release both buttons when the shade jogs. Back of Remote With the shade at either the upper or lower limit, simply press the STOP button to bring the shade to the favorite position. To go to the favorite position from any other location, make sure the shade has been stopped for at least three seconds before pressing the STOP button. Refer to the Motorization Guide for additional details. 15 smithandnoble.com

34 Optional Hold Down Bracket Hold Down Bracket Optional Hold Down Brackets are mounted with the supplied screws. With the shade at its proper drop, place the pin of each Hold Down into the hole in each End Cap and make sure the pins are level and aligned. Raise the shade, then screw the Hold Down Bracket into the mounting surface. Skew Adjustment If the shade does not raise evenly, first make sure the mounting brackets are mounted level with each other. If the shade is level and it still skews, use the Skew Adjustment Kit included with your shade to adjust skewing. If these suggestions don t work, then please give us a call or visit our website. Care & Cleaning Care & Cleaning /Safety Occasional light vacuuming with a soft bristle attachment or gentle feather dusting is all that is required to keep your shades looking fresh and neat. Safety First. Style Second To None. Great style should never come at the cost of safety. Every Smith & Noble window treatment conforms strictly to today s safety standards, including permanent tie-down devices and built-in cord stops. To protect young children and pets, there s no better way to eliminate risk than to use one of our cordless products. Child Safety Troubleshooting Recharging the Shade PROBLEM SOLUTION When the shade begins to operate The shade does not work or runs slowly. Recharge the motor. slower than normal it is time to charge Charging Port Setting (Red Button) the battery. Plug the 8.4v charger into the port on the motor. Plug the charger into an electrical outlet. A red light on the charger indicates that the battery is charging. To fully charge the batteries, allow the batteries to charge for at least 1 hour after the light on the charger turns green. A typical charge cycle can take between 4-6 hours. The shade only goes in one direction (up or down). Shade goes up when the down button is pushed and goes down when the up button is pushed. The indicator light on the remote does not shine or the remote range becomes shorter. The motor beeps when operated. The limit setting was unsuccessful and needs to be reset. Refer to the Motorization Guide. Press the Limit button on the underside of the remote and Stop button at the same time. Hold until the shade jogs once. The shade should now move in the correct direction. Replace the battery in the remote (CR2430 Lithium). Recharge the motor. Insert Charger If these suggestions don t work, then please give us a call or visit our website. 17 smithandnoble.com

35 Warranty Service The enjoyment of your window coverings should be everlasting, which is why our products come with a limited lifetime warranty. The warranty applies to the original owner, requires a proof of purchase and covers defects in material or craftsmanship. Shades or blinds must have been properly installed. We reserve the right to determine if your window covering warrants a repair or a replacement. In need of warranty service? Call us at and we ll arrange for a repair or replacement ASAP Smith & Noble Home, Inc. All Rights Reserved SN2056 SN_RS_M_R_2017_2

36 STEP BY STEP INSTALLATION INSTRUCTIONS Solar & Roller Shades Dual Shade with Loop Control

37 Everything You Need A Smooth Set-Up We want you to love your new window coverings and that includes having a smooth installation experience. If you encounter any difficulties or questions, please reach out to us for help. It s why we re here. Call us at or visit for more info on installation. Table of Contents Step 1 - Getting Started....3 Overview - Dual Shade with Loop Control....4 Step 2 - Mounting the Brackets...5 Step 3 - Hanging the Shade...6 Step 4 - Installing Cord Tensioner...7 Step 5 - Operating the Shade....8 Optional Skew Adjustment...9 Troubleshooting Care & Cleaning Instructions Safety Warranty...Back Cover We recommend you hold on to all packaging until your window coverings are fully installed. Should something go wrong (we strongly doubt it), we want any potential returns to be as painless as possible. Customer Service Hours Monday Friday: 6am 7pm PT Saturday Sunday: 7am 4pm PT smithandnoble.com 1 smithandnoble.com

38 Step 1 Parts & Tools Overview Getting Started Dual Shade with Loop Control No Headrail First, make sure you have all the parts and tools required to install your shades. ALL THE HARDWARE YOU LL NEED: Pencil, screw-driver, ¼ nut driver, level, and a drill with a 1 16 drill bit. Then find wooden studs where you ll want to attach the brackets; if you need to mount your shades to wallboard or plaster, use a secure fastener designed for hollow wall applications. For metal surfaces, pre-drill holes and use the included screws. For concrete, stone, brick, or tile surfaces, use a masonry drill and appropriate plugs, anchors, or screws. Dual Mounting Bracket Clutch Dual Mounting Bracket It s important when selecting a fastener to make sure it s designed to support the weight of the shade. Follow the fastener manufacturer s instruction from there on out. Cord Tensioner SCREWS DUAL SHADE MOUNTING BRACKETS PENCIL & SCREWDRIVER (NOT INCLUDED) POWER DRILL & LEVEL (NOT INCLUDED) Bottom Bar 3 smithandnoble.com

39 Step 2 Mounting Brackets Step 3 Hanging the Shade Inside Mount The installation brackets are always mounted so that the short legs face in. Brackets must be in line and level. Shim brackets on inside mounts if necessary. The roller must be level for the shade to operate properly. Attach each bracket using two screws either up through the top (A) or through the side (B). A B No Headrail Brackets Hanging Shades Once the brackets are secured and level, the fabric roll can be inserted. Make sure your hands are clean to avoid soiling the fabric. Be sure the clutch and roller end plug are inserted into the roller. Hold the shade with the bottom of the clutch facing the floor, and the beaded cord hanging straight down. Be sure the shade is fully rolled on the tube. Insert the spring loaded pin end into the round hole of the bracket. Push the clutch end toward the pin end to compress the spring. The pin should compress half way in for best fit. Line up the hooks on the clutch with the two slots in the bracket. Allow the spring to release and let the hooks go into the slots. Room Side Once the two hooks are through the slots, gently pull down on the clutch until the hooks lock securely to the bracket. Make sure that the fabric on the lower shade rolls off the back of the roller (standard roll) and that the fabric on the upper front shade rolls off the front of the roller (reverse roll). 5 smithandnoble.com

40 Step 4 Installing Cord Tensioner Step 5 Operating the Shade Installing Cord Tensioner Loop Control Your window shade has arrived with a cord tensioner to comply with current child safety standards. The cord tensioner must be mounted and secured before the window shade will operate correctly. Before doing anything, you must first slide the tension device to the bottom of the bead chain. While holding the tension device in one hand, pull the plunger away from the bead chain with the other hand. Lift the bead chain out of the bead locking groove and slide the tension device to the bottom of the chain loop. Plunger Bead locking grove Rear Bead Chain Front Bead Chain Opening and closing your new Smith & Noble shades is entirely hassle-free. On the back shade, pull the rear bead chain to lower the shade and, pull the front bead chain to raise. On the front shade, pull the front bead chain to lower the shade and pull the back bead chain to raise. Pull the tension device down until the bead chain is fully tensioned (plunger will be at the top) and then Plunger Location move the tension device up approximately 1 8". Mark the screw hole locations on the wall with a pencil. INSIDE MOUNT If mounting into wood, pre-drill screw holes and then install the tension device using the 2 large screws proviced. If not securing into wood, use appropriate anchors for the substrate and follow anchor manufacturer's instructions. OUTSIDE MOUNT Align the mounting bracket sight holes with the pencil marks. Sight hole If mounting into wood, pre-drill screw holes and then install the mounting bracket using Screw hole the 2 large screws proviced. If not securing into wood, use appropriate anchors for the substrate and follow anchor manufacturer's instructions. Press the tension device onto the mounting bracket posts. Carefully install the 2 small screws provided, through the tension device into the mounting bracket using a phillips head screwdriver. DO NOT OVER-TIGHTEN. Post 7 smithandnoble.com

41 Optional Troubleshooting Skew Adjustment If the shade does not raise evenly, first make sure the mounting brackets are mounted level with each other. If the shade is level and it still skews, operate the shade to the full down position. Prepare a strip of masking tape approximately 5 long. On the side of the shade opposite of the skewing direction, and as close to the end of the roller as possible, lift the fabric toward the back of the shade using your fingers and slide the tape with the sticky side facing the roller up as far as possible. The tape is to be running parallel to the roller. Roll the shade up and check for skewing. If the shade is still skewing, add another strip of tape on top of the first one. If the shade is now skewing in the opposite direction, tear off about 1 of tape from the last strip installed. The tape is to be torn from the end closest to the center of the shade. If these suggestions don t work, then please give us a call or visit our website. Fabric Roll Place tape at this end PROBLEM SOLUTION Make sure the mounting brackets are The shade fabric does not roll up evenly aligned and level with one another. The shade may be caught on an obstruction The shade will not raise such as a window crank or latch; if this is the case feel free to untangle. If these suggestions don t work, then please give us a call or visit our website. Care & Cleaning Care & Cleaning /Safety Use brush or dust head attachment. Occasional light vacuuming with a soft bristle attachment or gentle feather dusting is all that is required to keep your shades looking fresh and neat. Safety First. Style Second To None. Great style should never come at the cost of safety. Every Smith & Noble window treatment conforms strictly to today s safety standards, including permanent tiedown devices and built-in cord stops. To protect young children and pets, Loop Control works with a cord tensioner, which must be mounted to your window frame or wall. The shade or blind will not work if the cord tensioner is not mounted. Child Safety 9 smithandnoble.com

42 Warranty Service The enjoyment of your window coverings should be everlasting, which is why our products come with a limited lifetime warranty. The warranty applies to the original owner, requires a proof of purchase and covers defects in material or craftsmanship. Shades or blinds must have been properly installed. We reserve the right to determine if your window covering warrants a repair or a replacement. In need of warranty service? Call us at and we ll arrange for a repair or replacement ASAP Smith & Noble Home, Inc. All Rights Reserved SN2038 SN_RS_DS_2017_1

43 STEP BY STEP INSTALLATION INSTRUCTIONS Solar & Roller Shades Cordless Control with Mounting Bar or Cordless Control with Cassette

44 Table of Contents Step 1 - Getting Started Everything You Need A Smooth Set-Up We want you to love your new window coverings and that includes having a smooth installation experience. If you encounter any difficulties or questions, please reach out to us for help. It s why we re here. Call us at or visit for more info on installation. We recommend you hold on to all packaging until your window coverings are fully installed. Should something go wrong (we strongly doubt it), we want any potential returns to be painless as possible. Customer Service Hours Monday Friday: 6am 7pm PT Saturday Sunday: 7am 4pm PT smithandnoble.com Overview - Cordless Control with Mounting Bar Step 2 - Mounting the Brackets Step 3 - Hanging and Removing the Shade Step 4 - Operating the Shade Optional - Attaching Cordless Handle Hold Down Brackets Upstop Adjustment... 9 Tension Adjustment Skew Adjustment Overview - Cordless Control with Decorative Cassette...11 Step 2 - Mounting the Brackets Step 3 - Hanging and Removing the Shade Step 4 - Operating the Shade Optional - Attaching Cordless Handle Hold Down Brackets Upstop Adjustment Tension Adjustment Skew Adjustment Care & Cleaning Safety Warranty smithandnoble.com

45 Step 1 Parts & Tools Overview Getting Started First, make sure you have all the parts and tools required to install your shades. Cordless Control With Mounting Bar ALL THE HARDWARE YOU LL NEED: Pencil, screw-driver, ¼ nut driver, level, and a drill with a 1 16" drill bit. Mounting Bar Then find wooden studs where you ll want to attach the brackets; if you need to mount your shades to wallboard or plaster, use a secure fastener designed for hollow wall applications. For metal surfaces, pre-drill holes and use the included screws. For concrete, stone, brick, or tile surfaces, use a masonry drill and appropriate plugs, anchors, or screws. It s important when selecting a fastener to make sure it s designed to support the weight of the shade. Follow the fastener manufacturer s instruction from there on out. Bottom Bar SCREWS MOUNTING BAR BRACKET CASSETTE BRACKET POWER DRILL (NOT INCLUDED) SCREWDRIVER (NOT INCLUDED) CORDLESS HANDLE (OPTIONAL) HOLD DOWN BRACKET (OPTIONAL) EXTENSION BRACKET (OPTIONAL) PENCIL (NOT INCLUDED) LEVEL (NOT INCLUDED) BRACKET QTY SHADE WIDTH 2 up to 40" 3 40" 72" 4 721/8" 84" 5 84" 114" 3 smithandnoble.com

46 Step 2 Mounting Brackets Step 2 Mounting Brackets (con't) Inside Mount 2" Plastic Tab faces up Outside Mount Center the shade in the window First, hold the shade above the frame. Mark the position of the brackets. End brackets should be Plastic Tab faces back window so that it s perfectly centered over the window opening at the located 2" in from each end. Mount desired height. Mark the position of the brackets to the top of the window the headrail on the wall. End brackets frame. Make sure the brackets are should be located 2" from each end. aligned. Space additional brackets Mount the brackets to the wall. Make evenly between two end brackets. sure the mounting brackets are level. If needed, space additional brackets evenly between two end brackets. Side Mount (optional) Measure from window sill up to desired mounting position. Mount Extension Brackets on each side of window frame as shown. Make sure to confirm that headrail will sit perfectly level. Once Extension Brackets are installed Plastic Tab faces back Mounting Bracket Extension Bracket Plastic Tab faces back Extension Brackets (optional) Optional Extension Brackets are used to project the back of the shade up to 2 1 2" from the mounting surface. Attach the Standard Mounting Bracket to the Extension Bracket with the nut and bolt provided. and properly positioned, attach the Standard Mounting Brackets using the nuts and bolts provided. 5 smithandnoble.com

47 Step 3 Hanging the Shade Step 4 Operating the Shade Hanging the Shade Cordless Control (Inside Mount or Extension Bracket) Hook the rail onto the front of the bracket and rotate it until the back of the rail securely snaps into place. Bracket Headrail Opening and closing your new Smith & Noble shades is entirely hasslefree. To lower it, pull down gently on the bottom bar. Your shade will slowly raise automatically with a slight pull on the bottom bar. Simply pull down slightly, release and the shade will (Outside Mount) raise effortlessly. Hook the rail onto the bottom of the bracket and rotate it until the back of the rail securely snaps into place. Bottom Bar Removing the Shade (Inside Mount) To remove the shade, partially lower the shading and press the clear tab on the mounting bracket. Rotate the shade to remove. (Outside Mount) Press down on clear tab and then rotate shade to release. (Optional) Attach Cordless Handle (optional) Attach the optional clear Cordless Handle in order to protect and keep your shades clean. If you decide to attach the handle and adjust the upstop, make sure the handle does not touch the fabric roll when the shade is fully raised or it could damage the fabric. Cordless Handle 7 smithandnoble.com

48 (Optional) (Optional) Hold Down Bracket Optional Hold Down Brackets are Tension Adjustment mounted with the supplied screws. With the shade at its proper drop, place the pin of each Hold Down into the hole in each End Cap and make sure the pins are level and aligned. Mark the screw holes with a pencil. Raise the shade, then screw the Hold Down Bracket into the mounting surface. Hold Down Bracket Decrease Tension Increase Tension If the shade does not retract fully, you may need to increase the tension by using a screwdriver. When facing the shade, on a STANDARD ROLL the adjustment is made at the LEFT end of the shade. On a REVERSE ROLL the adjustment is made at the RIGHT end of the shade. Upstop Adjustment Skew Adjustment Retract the shade and let it stop at the top. If you do not like where the upstop is set it can be adjusted by using a screwdriver. When facing the shade, on a STANDARD ROLL the adjustment is made at the RIGHT end of the shade. On a REVERSE ROLL the adjustment is made at the LEFT end of the shade. If the shade does not raise evenly, first make sure the mounting brackets are mounted level with each other. Be sure your shade is fully raised before making adjustments. Raise Bottom Rail Highest allowed position of bottom rail pictured Lower Bottom Rail Bottom rail is too high. Fabric may be damaged Tape Fabric Roll If the shade is still not level, pull the shade all the way down. Prepare a strip of masking tape approximately 5 long. On the side of the shade opposite of the skewing direction, and as close to the end of the roller as possible, lift the fabric toward the back of the shade using your fingers and slide the tape with the sticky side facing the roller up as far as possible. The tape is to be running parallel to the roller. Roll the shade up and check for skewing. If the shade is still skewing, add another strip of tape on top of the first one. If the shade is now skewing to WARNING: When setting the upstop, do not allow the bottom rail to jam between the fabric roll and the mounting bar. This will result in damage to the fabric. Correct Incorrect the opposite direction, tear off about 1" of tape from the last strip installed. The tape is to be torn from the end closest to the center of the shade. If these suggestions don t work, then please give us a call or visit our website. 9 smithandnoble.com

49 Overview Step 2 Mounting Brackets Cordless Control with Decorative Cassette Decorative Cassette 2" Inside Mount Center the shade in the window frame. Mark the position of the headrail. End brackets should be located 2" in from each end. Mount the brackets to the top of the window frame. Make sure the brackets are aligned. Space additional brackets evenly between two end brackets. Bottom Bar Side Mount (optional) Measure from window sill up to desired mounting position. Mount Side Mount Brackets on each side of window frame as shown. Make sure to confirm that headrail will sit perfectly level. Once Side Mount Brackets are installed and properly positioned, attach the Standard CORDLESS HANDLE (OPTIONAL) HOLD DOWN BRACKET (OPTIONAL) EXTENSION BRACKET (OPTIONAL) Mounting Brackets using the nuts and bolts provided. BRACKET QTY SHADE WIDTH 2 up to 40" 3 40" 72" 4 721/8" 84" 5 84" 114" 11 smithandnoble.com

Solar & Roller Shades

Solar & Roller Shades STEP BY STEP INSTALLATION INSTRUCTIONS Solar & Roller Shades Motivia Motorization Remote Control Everything You Need Table of Contents Step 1 - Getting Started....3 Overview - Motorization with No Headrail...4

More information

Solar & Roller Shades

Solar & Roller Shades STEP BY STEP INSTALLATION INSTRUCTIONS Solar & Roller Shades Motivia Motorization Remote Control Everything You Need Table of Contents Step 1 - Getting Started....3 Overview - Motorization with No Headrail...4

More information

Solar & Roller Shades

Solar & Roller Shades STEP BY STEP INSTALLATION INSTRUCTIONS Solar & Roller Shades Side by Side Shades Loop Control & Motivia Motorization Everything You Need A Smooth Set-Up We want you to love your new window coverings and

More information

Solar & Roller Shades

Solar & Roller Shades STEP BY STEP INSTALLATION INSTRUCTIONS Solar & Roller Shades 1 2 3 4 5 Motivia Motorization Table of Contents Step 1 - Getting Started....3 Everything You Need A Smooth Set-Up We want you to love your

More information

Solar & Roller Shades

Solar & Roller Shades STEP BY STEP INSTALLATION INSTRUCTIONS Solar & Roller Shades 1 2 3 4 5 Motivia Motorization Table of Contents Step 1 - Getting Started....3 Everything You Need A Smooth Set-Up We want you to love your

More information

Solar Roller & Classic Roller Shades

Solar Roller & Classic Roller Shades STEP BY STEP INSTALLATION INSTRUCTIONS Solar Roller & Classic Roller Shades 1 2 3 4 5 Motivia Motorization Table of Contents Step 1 - Getting Started....3 Everything You Need A Smooth Set-Up We want you

More information

STEP BY STEP INSTALLATION INSTRUCTIONS. Sheer Shadings. Motivia Motorization Remote Control

STEP BY STEP INSTALLATION INSTRUCTIONS. Sheer Shadings. Motivia Motorization Remote Control STEP BY STEP INSTALLATION INSTRUCTIONS Sheer Shadings 1 2 3 4 5 Motivia Motorization Remote Control Everything You Need A Smooth Set-Up We want you to love your new window coverings and that includes having

More information

STEP BY STEP INSTALLATION INSTRUCTIONS. Pleated Shades. Standard Control, Top Down/Bottom Up & Standard 2-on-1

STEP BY STEP INSTALLATION INSTRUCTIONS. Pleated Shades. Standard Control, Top Down/Bottom Up & Standard 2-on-1 STEP BY STEP INSTALLATION INSTRUCTIONS Pleated Shades Standard Control, Top Down/Bottom Up & Standard 2-on-1 Everything You Need A Smooth Set-Up We want you to love your new window coverings and that includes

More information

STEP BY STEP INSTALLATION INSTRUCTIONS. Honeycomb Shades. Motivia Motorization

STEP BY STEP INSTALLATION INSTRUCTIONS. Honeycomb Shades. Motivia Motorization STEP BY STEP INSTALLATION INSTRUCTIONS Honeycomb Shades 1 2 3 4 5 Motivia Motorization Table of Contents Everything You Need A Smooth Set-Up We want you to love your new window coverings and that includes

More information

Honeycomb Shades Skylight

Honeycomb Shades Skylight STEP BY STEP INSTALLATION INSTRUCTIONS Honeycomb Shades Skylight 1 2 3 4 5 Motivia Motorization Everything You Need A Smooth Set-Up We want you to love your new window coverings and that includes having

More information

Motivia Motorization

Motivia Motorization STEP BY STEP INSTALLATION INSTRUCTIONS Luxe Linen Honeycomb Shades Skylight 1 2 3 4 5 Motivia Motorization Everything You Need Table of Contents Step 1 - Getting Started....3 Overview - Motorized Honeycomb

More information

Roller Shades MOTORIZED SHADE. Simplicity. Installation & Care Instructions

Roller Shades MOTORIZED SHADE. Simplicity. Installation & Care Instructions Roller Shades MOTORIZED SHADE Simplicity Installation & Care Instructions 152140 J 1/13/2016 GETTING STARTED A few simple tools are required: - Measuring tape - Power drill, drill bits - 1 4 Hex head and/or

More information

Roller Shades MOTORIZED SHADE. Simplicity. Installation & Care Instructions

Roller Shades MOTORIZED SHADE. Simplicity. Installation & Care Instructions Roller Shades MOTORIZED SHADE Simplicity Installation & Care Instructions 152140 I 8/12/2015 GETTING STARTED A few simple tools are required: - Measuring tape - Power drill, drill bits - 1 4 Hex head and/or

More information

Roller Shades CORD LOOP. Head Rail, Fascia and No Head Rail. Installation & Care Instructions

Roller Shades CORD LOOP. Head Rail, Fascia and No Head Rail. Installation & Care Instructions Roller Shades CORD LOOP Head Rail, Fascia and No Head Rail Installation & Care Instructions 152038 H 5/30/2017 GETTING STARTED A few simple tools are required: - Measuring tape - Power drill, drill bits

More information

with Touch & Go Feature

with Touch & Go Feature Cellular Shades Veronica Valencia Blackout Cellular Shades POWER TOUCHTM RECHARGEABLE with Touch & Go Feature Installation & Care Instructions 152730 4/19/2017 GETTING STARTED A few simple tools are required:

More information

Do not dispose of packaging until the shades are operating to your satisfaction.

Do not dispose of packaging until the shades are operating to your satisfaction. for purchasing from smith+noble. Your new shade has been custom-crafted to your exact window dimensions from the highest quality materials. Once in your windows, they will provide you with a lifetime of

More information

Cellular Shades MOTORIZED SHADE Top Down - Bottom Up. Installation & Care Instructions

Cellular Shades MOTORIZED SHADE Top Down - Bottom Up. Installation & Care Instructions Cellular Shades MOTORIZED SHADE Top Down - Bottom Up ucontact@udoblinds.com 1-855-205-8442 Installation & Care Instructions 152746A 7/2/2018 GETTING STARTED A few simple tools are required: - Measuring

More information

Fabric Studio Custom Roll Shades Installation Instructions

Fabric Studio Custom Roll Shades Installation Instructions Fabric Studio Custom Roll Shades Installation Instructions Cassette System Battery Motor Lifting System Inside or Outside Mount Thank you for purchasing your new roll shade. It has been custom-made from

More information

INSTALLATION INSTRUCTIONS. - Spring Loaded Tube - Beaded Chain Loop - Cordless

INSTALLATION INSTRUCTIONS. - Spring Loaded Tube - Beaded Chain Loop - Cordless INSTALLATION INSTRUCTIONS ROLLER SHADES SPRING CLUTCH TOUCHLIFT REMOTELIFT - Spring Loaded Tube - Beaded Chain Loop - Cordless - Lift Motorization Thank you for your purchase. This shade has been custom

More information

Motorized Skylight Installation Instructions

Motorized Skylight Installation Instructions Motorized Skylight Installation Instructions Getting Started A few simple tools are required: - Measuring tape - Power drill, drill bits - Hex head and/or Phillips driver bit - Pencil Additional fasteners

More information

Top Down Rollstar Shade Installation Instructions

Top Down Rollstar Shade Installation Instructions Top Down Rollstar Shade Installation Instructions Thank you for purchasing your new Rollstar shade. It has been custom-made from the highest quality materials to the dimensions you specified. With proper

More information

Continuous Cord Loop Designer Series Roller Shades

Continuous Cord Loop Designer Series Roller Shades Shade Maintenance Leveling a Crooked Shade 1. Pull down shade until roller is exposed. Do not pull further to avoid pulling cloth off roller. 2. Stick a 5" strip of masking tape into the roller at opposite

More information

Rollstar Shade Installation Instructions

Rollstar Shade Installation Instructions Rollstar Shade Installation Instructions All Lifting Systems Inside or Outside Mount Thank you for purchasing your new Rollstar shade. It has been custom-made from the highest quality materials to the

More information

Installation Operation Care

Installation Operation Care Installation Operation Care Alustra Woven Textures Standard and Cassette Roller Shades CONTENTS Getting Started: Product View...1 Tools and Fasteners Needed...2 Installation: Installation Overview...3

More information

Installation Instructions

Installation Instructions Roller & Roman Shades Lifting Systems Cassette and Sure-Lift EZ Lift Cordless EZ Pull Standard and Cassette R-Series Clutch SL-Series Clutch Spring Roller Fascias and Valances 3, 4 Flat and 4 Curved Fascia

More information

INSTALLING YOUR MOTORIZED ROLLER/SOLAR SHADE

INSTALLING YOUR MOTORIZED ROLLER/SOLAR SHADE ROLLER/SOLAR SHADE PARTS INCLUDED: 4x Screws (per shade) 2x Mounting Brackets (per shade) 1x Plug-In Charger w/extension Cable* 1x Motor Cap Cover Remote Control(s) *Battery Motor Only TOOLS YOU WILL NEED:

More information

Clutch Operated Roller Shade with Fascia Installation Instructions

Clutch Operated Roller Shade with Fascia Installation Instructions Clutch Operated Roller Shade with Fascia Installation Instructions Tools Required for Installation: Power Drill & Drill Bits Installation Screws Level Pliers Measuring Tape Step #1 Bracket Installation

More information

DUETTE POWERRISE SHADES

DUETTE POWERRISE SHADES DUETTE POWERRISE SHADES A B OPEN CLOSE INSTALLATION OPERATION CARE PRODUCT VIEW Spacer Blocks Installation Brackets End Cap Sensor Eye and Manual Button Fabric-Covered Valance PowerRise with Platinum Technology

More information

Installation Instructions

Installation Instructions Roller & Roman Shades Lifting Systems Cassette EZ Lift Cordless EZ Pull Standard and Cassette R-Series Clutch SL-Series Clutch Spring Roller Fascias and Valances 3, 4 Flat and 4 Curved Fascia 5 Fascia

More information

Horizontal Shadings. Continuous Cord Loop Beaded Chain Loop Cordless Lift. Installation & Operating Instructions

Horizontal Shadings. Continuous Cord Loop Beaded Chain Loop Cordless Lift. Installation & Operating Instructions Horizontal Shadings Continuous Cord Loop Beaded Chain Loop Cordless Lift Installation & Operating Instructions TABLE OF CONTENTS Getting Started: Mounting Types...3 Installation Components...3 Tools and

More information

Auto-Lift Operating System

Auto-Lift Operating System Installation Instructions Parasol Cellular Shades Auto-Lift Operating System CONTENTS Getting Started: Product View... 1 Tools and Fasteners Needed... 2 Installation: Installation Overview... 3 STEP 1

More information

9-I DUETTE SHADES POWERVIEW MOTORISATION

9-I DUETTE SHADES POWERVIEW MOTORISATION SECTION: 9-I DUETTE SHADES POWERVIEW MOTORISATION 9-I DUETTE SHADES POWERVIEW MOTORISATION Product View Installation Brackets End Cap Manual Control Button Fabric-Covered Headrail Bottom Rail Battery Wand

More information

Honeycomb Luxe Linen Shades

Honeycomb Luxe Linen Shades Step by Step Installation Instructions Honeycomb Luxe Linen Shades Customer Service 800.248.8888 or visit us online at smithandnoble.com Our window fashions represent a design breakthrough in style, efficiency

More information

Installation Operation Care

Installation Operation Care Installation Operation Care Standard Clutch CONTENTS Getting Started: Product View... 1 Tools and Fasteners Needed... Installation: Mounting Types and Window Terminology... Mount the Installation Brackets

More information

INSTALLATION INSTRUCTIONS TOOLS YOU WILL NEED TABLE OF CONTENTS

INSTALLATION INSTRUCTIONS TOOLS YOU WILL NEED TABLE OF CONTENTS INSTALLATION INSTRUCTIONS HONEYCOMB SHADES CORDLESS LIFT SYSTEM CONTINUOUS CORD LOOP SYSTEM REMOTELIFT 2.0 SYSTEM Thank you for your purchase. This shade has been custom built for you from the highest

More information

Standard Roller Shades

Standard Roller Shades Standard Roller Shades Dual Link System Multi Link System Double Bracket System Installation & Operating Instructions New pictures TC01-06.2011 TABLE OF CONTENTS Getting Started: Mounting Types...1 Installation

More information

L-SERIES CLUTCHES L-SERIES CLUTCHES. Getting Started INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS

L-SERIES CLUTCHES L-SERIES CLUTCHES. Getting Started INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS L-SERIES CLUTCHES INSTALLATION INSTRUCTIONS Thank you for purchasing your new L-Series Clutches. They have been custom-made from the highest quality materials. to the dimensions you specified. With the

More information

Battery-Powered Motorized System

Battery-Powered Motorized System Installation, Operation and Care Instructions Battery-Powered Motorized System CONTENTS Getting Started: Product View... 1 Tools and Fasteners Needed... 2 Installation: Installation Overview... 3 STEP

More information

Owner s Guide. Duette And Applause Cordlock Shades. Standard Shades

Owner s Guide. Duette And Applause Cordlock Shades. Standard Shades Owner s Guide Duette And Applause Cordlock Shades Standard Shades CONTENTS Introduction...2 Get Started...3 Product View...4 Mount The Installation Brackets...5 Install The Shade...9 Install The Hold-Down

More information

Roller Shade Installation Instructions

Roller Shade Installation Instructions Roller Shade Installation Instructions Standard Installation p - 2 - Cordless Installation p - 6 - Cassette Installation p - 10- Motorization Solar Panel Installation p - 12 - Motorization Remote Control

More information

Installation Instructions Roller Shades. 451 N. Cota St, Corona, CA

Installation Instructions Roller Shades. 451 N. Cota St, Corona, CA Installation Instructions Roller Shades 451 N. Cota St, Corona, CA 92880 800-281-3013 Installing Your New Roller Shades Please take a moment to review the contents of your parts package. Your parts package

More information

Installation Instructions Roller Shades. 451 N. Cota St, Corona, CA

Installation Instructions Roller Shades. 451 N. Cota St, Corona, CA Installation Instructions Roller Shades 451 N. Cota St, Corona, CA 92880 800-281-3013 Installing the Shade: Installing Your New Roller Shades Please take a moment to review the contents of your parts package.

More information

SILHOUETTE POWERVIEW MOTORISATION

SILHOUETTE POWERVIEW MOTORISATION SILHOUETTE POWERVIEW MOTORISATION Product View Installation Brackets Battery Wand Power Cable Limit Stop Battery Wand Clips Manual Control Button Magnetic Hold-Down Brackets (Optional) Weight Clip Bottom

More information

Trackstar Motorized Folding Shade Installation Instructions

Trackstar Motorized Folding Shade Installation Instructions Trackstar Motorized Folding Shade Installation Instructions Thank you for purchasing your new Trackstar folding shade. It has been custom-made from the highest quality materials to the dimensions you specified.

More information

smithandnoble.com

smithandnoble.com The most affordable & user-friendly motorized blinds, shades & motorized hardware available. smithandnoble.com 800.248.8888 SOLUTIONS Motivia Motorization is the perfect solution for wide or tall windows,

More information

LUXAFLEX DUETTE Shades with Hard-Wired Motorisation. Installation Operation Care

LUXAFLEX DUETTE Shades with Hard-Wired Motorisation. Installation Operation Care LUXAFLEX DUETTE Shades with Hard-Wired Motorisation Installation Operation Care CONTENTS Getting Started: Product View... 1 Tools and Fasteners Needed... 2 Installation: Installation Overview... 3 Mount

More information

Installation and Care Instructions

Installation and Care Instructions WARDS WARDS REPLACE BATTERIES, REPLACE BATTERIES, WARDS WARDS REPLACE BATTERIES, REPLACE BATTERIES, THANK YOU for purchasing a Hunter Douglas Brilliance PowerRise shade. Your new shade has been custom

More information

INSTALLATION INSTRUCTIONS TOOLS YOU WILL NEED GETTING STARTED

INSTALLATION INSTRUCTIONS TOOLS YOU WILL NEED GETTING STARTED INSTALLATION INSTRUCTIONS HONEYCOMB SHADES STANDARD RECTANGULAR CORDLESS LIFT & LOCK Thank you for your purchase. This shade has been custom built for you from the highest quality materials. To avoid errors

More information

Eazidraw Cordless. Installation & Set Up Instructions. Electric Blinds & Curtains

Eazidraw Cordless. Installation & Set Up Instructions. Electric Blinds & Curtains Eazidraw Cordless Installation & Set Up Instructions Electric Blinds & Curtains Features Quiet, DC battery motor with low power consumption. Rechargeable battery with up to 500 uses between charges Fully

More information

INSTALLATION MANUAL COUPLED SHADE PRODUCT OVERVIEW. 1. Idle End Shade

INSTALLATION MANUAL COUPLED SHADE PRODUCT OVERVIEW. 1. Idle End Shade INSTALLATION MANUAL COUPLED SHADE PRODUCT OVERVIEW 1. Idle End Shade 4 3 2 2. Intermediate Bracket 3. Drive End Shade 4. Clutch 5. Stop Bead (attached in field) 6. Stainless Steel Bead Chain 1 7. Chain

More information

JEEVES. JEEVES Installation Manual. Installation Manual The Easiest Do-It-Yourself Dumbwaiter on the Market

JEEVES. JEEVES Installation Manual. Installation Manual The Easiest Do-It-Yourself Dumbwaiter on the Market 1 888-323-8755 www.nwlifts.com JEEVES Installation Manual The Easiest Do-It-Yourself Dumbwaiter on the Market This manual will cover the installation procedure step-by-step. The installation of this dumbwaiter

More information

Serena Remote Controlled Shades

Serena Remote Controlled Shades Prepare to Install Important Notes Please Read Before Installing! WARNING: SHOCK HAZARD. Can cause serious injury or death. Read and follow all instructions.! CAUTION: RISK OF FALLING OBJECTS. Securely

More information

HONEYCOMB & PLEATED SHADES

HONEYCOMB & PLEATED SHADES INSTALLATION INSTRUCTIONS HONEYCOMB & PLEATED SHADES CONTINUOUS CORD LOOP Thank you for your purchase. This shade has been custom built for you from the highest quality materials. To avoid errors and save

More information

LEVOLOR. Sheer Shadings. Persianas traslúcidas Stores diaphanes INSTALLATION OPERATION CARE

LEVOLOR. Sheer Shadings. Persianas traslúcidas Stores diaphanes INSTALLATION OPERATION CARE LEVOLOR Sheer Shadings Persianas traslúcidas Stores diaphanes INSTALLATION OPERATION CARE INSTALACIÓN FUNCIONAMIENTO CUIDADO INSTALLATION FONCTIONNEMENT ENTRETIEN all 1 2 3 open close Battery Powered Motorized

More information

INSTALLATION GUIDE MANUAL SHADE

INSTALLATION GUIDE MANUAL SHADE PRODUCT OVERVIEW 6 7 8 9 10 11 12 5 4 3 2 1 3" Fascia 1. Idle End Plug 2. Shade Band 3. Clutch 4. 3" Fascia Bracket 5. 3" Fascia Bracket Cover 6. 3" Chain Diverter 7. 3" Chain Diverter Cover (required

More information

INSTALLATION INSTRUCTIONS TOOLS YOU WILL NEED GETTING STARTED

INSTALLATION INSTRUCTIONS TOOLS YOU WILL NEED GETTING STARTED INSTALLATION INSTRUCTIONS HONEYCOMB SHADES STANDARD RECTANGULAR Thank you for your purchase. This shade has been custom built for you from the highest quality materials. To avoid errors and save valuable

More information

// Retail Price List & Product Info Guide BASICS WINDOW SHADINGS

// Retail Price List & Product Info Guide BASICS WINDOW SHADINGS // Retail Price List & Product Info Guide BASICS WINDOW SHADINGS Effective April 9, 2018 TABLE OF CONTENTS Product Overview Features & Benefits....................................................................

More information

A B C D E F. Tools Required (supplied by others)

A B C D E F. Tools Required (supplied by others) Page 1 of 17 Parts List Below Deck Automatic Retractable Security Cover Kit (1) Tube End Bearing Plate (A) (1) Rope Reel and Cover Drum Motor Assembly (B) (1) Cover Drum (1) Pulley Support Channel (2)

More information

A B C D E F. b.tools Required (supplied by others) 3/16" Drill Bit 3/8" Wrench Phillips Head Screwdriver

A B C D E F. b.tools Required (supplied by others) 3/16 Drill Bit 3/8 Wrench Phillips Head Screwdriver Page 1 of 13 5E.1 Parts List a. Below Deck Automatic Retractable Security Cover Kit (1) Tube End Bearing Plate (A) (1) Rope Reel with Motor Attached (B) (1) Rope Reel Cover (C) (1) Cover Drum (1) Cover

More information

PRODUCT MANUAL Gecko Wireless One Zone LED Dimmer and Receiver

PRODUCT MANUAL Gecko Wireless One Zone LED Dimmer and Receiver Product Description The Gecko Wireless One Zone Wall LED Dimmer has been designed to bring light control easily. No wires or switch box locations are needed, just stick or mount the Gecko to any flat location

More information

Eazipole Cordless. Installation & Set Up Instructions. Electric Blinds & Curtains

Eazipole Cordless. Installation & Set Up Instructions. Electric Blinds & Curtains Eazipole Cordless Installation & Set Up Instructions Electric Blinds & Curtains Pole Installation - Deciding The Best Position Points to consider when planning the installation of your pole It may be easiest

More information

Clutch Operated FlexShade NEXD Window shade with heavy duty clutch and 3 hardware profile. Cassette option.

Clutch Operated FlexShade NEXD Window shade with heavy duty clutch and 3 hardware profile. Cassette option. INSTRUCTIONS INSTALLATION & OPERATION Overview - FlexShade Components Idler 1¼ Roller with Spline Atachment Clutch TOOLS REQUIRED Clutch PENCIL POWER DRILL Idler 1 Eliptical Hem Bar TAPE MEASURE LEVEL

More information

Cassette Systems Fabrication & Installation Instructions Cassette 80, 100, 120

Cassette Systems Fabrication & Installation Instructions Cassette 80, 100, 120 Cassette Systems Fabrication & Installation Instructions Cassette 80, 100, 120 All Cassette Components 2 Cassette Systems Tools Needed page 4 Cassette 80 page 5-12 System Diagram- page 5 System Diagram-

More information

Installation Instructions Skylight FlexShades by Draper

Installation Instructions Skylight FlexShades by Draper Caution 1 Read entire procedure before installing. Keep instructions for future reference. 2 Tools needed for installation: Cordless drill/screwdriver, with flathead, phillips, and 1 /4" nut driver attachments

More information

SPECIALTY TOP CO. STC. INSTALLATION INSTRUCTIONS TOYOTA FAST TRAC Z TOP Toyota FJ PART #222-31X 82 1/8" 82 1/8"

SPECIALTY TOP CO. STC. INSTALLATION INSTRUCTIONS TOYOTA FAST TRAC Z TOP Toyota FJ PART #222-31X 82 1/8 82 1/8 STC INSTALLATION INSTRUCTIONS TOYOTA FAST TRAC Z TOP Toyota FJ-40 1963-1983 PART #222-31X SPECIALTY TOP CO. Thank you for purchasing Specialty's Convertible Top for your Toyota. It has been designed for

More information

WARNING. Installation Panel cord operated. rtube.nl/red403 PTC17C2/PTC17C3/ PTC17C4/PTC17C5/ PTC17C6 INSTALLATIONMANUAL

WARNING. Installation Panel cord operated. rtube.nl/red403 PTC17C2/PTC17C3/ PTC17C4/PTC17C5/ PTC17C6 INSTALLATIONMANUAL Installation Panel cord operated Read the instructions carefully before assembling and using the product. Assembling process can be completed by non-professionals. For indoor use only. WARNING Young children

More information

MOTORIZED ROLLER SHADES PROGRAMMING GUIDE OTTO 30 OTTO DC2

MOTORIZED ROLLER SHADES PROGRAMMING GUIDE OTTO 30 OTTO DC2 MOTORIZED ROLLER SHADES PROGRAMMING GUIDE OTTO 30 OTTO DC2 REMOTE CONTROL BASICS Wall Mount Holder Remove cover from base by prying with flat head screwdriver. Use supplied fasteners and anchors to attach

More information

FlexJet - Flex Cable Replacement

FlexJet - Flex Cable Replacement P/N: 109515R0 14140 NE 200th St. Woodinville, WA. 98072 PH: (425) 398-8282 FX: (425) 398-8383 FlexJet - Flex Cable Replacement Notices: Warning! Ensure that all AC power cables are removed from the printer

More information

The Valencia Roller Shade

The Valencia Roller Shade featuring 16 patterns with 103 sku s from which to choose. A mixture of Light Filtering and Room Darkening fabrics displays Elite Window Fashion s commitment to new and trendy design in the roller shade

More information

Premium Dry Freight (Plywood) Door Installation REFERENCE FIGURE 1

Premium Dry Freight (Plywood) Door Installation REFERENCE FIGURE 1 Premium Dry Freight (Plywood) Door Installation A Premium door can be identified as usually having a two-spring balancer, 2 diameter (nominal) rollers, and end hinges with removable covers. If your Whiting

More information

p wered BLINDS control at your fingertips Installation, Programming & Operation Guide 12Vdc Powered Roman Blind

p wered BLINDS control at your fingertips Installation, Programming & Operation Guide 12Vdc Powered Roman Blind p wered BLINDS control at your fingertips Installation, Programming & Operation Guide 12Vdc Powered Roman Blind www.poweredblinds.co.uk Contents The contents of your order... Page 3 Blind fitting & position...

More information

PRODUCT MANUAL Gecko Wireless 2 Zone LED Dimmer and Receiver

PRODUCT MANUAL Gecko Wireless 2 Zone LED Dimmer and Receiver Product Description The Gecko Wireless 2 Zone Wall LED Dimmer has been designed to bring light control easily. No wires or switch box locations are needed, just stick or mount the Gecko to any flat location

More information

Times-2 Speed Files INSTALLATION INSTRUCTIONS

Times-2 Speed Files INSTALLATION INSTRUCTIONS Times-2 Speed Files INSTALLATION INSTRUCTIONS AURORA from RICHARDS-WILCOX, INC. 600 South Lake Street Aurora, Illinois 60506 Phone: 630-897-6951 Fax: 630-897-6994 Toll Free: 800-277-1699 TIMES-2 SPEED

More information

SPECIALTY TOP CO. STC INSTALLATION INSTRUCTIONS BRONCO ZIPPER FASTTRAC TOP PART # BRONCO

SPECIALTY TOP CO. STC INSTALLATION INSTRUCTIONS BRONCO ZIPPER FASTTRAC TOP PART # BRONCO STC INSTALLATION INSTRUCTIONS BRONCO ZIPPER FASTTRAC TOP PART #331-310 BRONCO 1966-1977 SPECIALTY TOP CO. Thank you for purchasing Specialty's Convertible Top for your Bronco. It has been designed for

More information

Shaver Industries. Assembly Instructions Vertical Vinyl Curtain Door DT2 Wire Rope Replacement

Shaver Industries. Assembly Instructions Vertical Vinyl Curtain Door DT2 Wire Rope Replacement Shaver Industries 20 Steckle Place, Kitchener, ON N2E 2C3 Ph 1(888) 766 8328 www.shaverinc.com Assembly Instructions Vertical Vinyl Curtain Door DT2 Wire Rope Replacement Overview: Preparation: Installation:

More information

Remove the 3-11mm nuts holding mirror on. Don t drop the nuts!

Remove the 3-11mm nuts holding mirror on. Don t drop the nuts! 2005-2012 Ford Mustang Puddle Lamp Kit Parts List: Quantity: Tool List: LED Lamps 2 Flat head screwdriver Seals 2 Ratchet & Socket set OR Nuts 2 Adjustable Wrench Wiring harness 1 Drill & 11/16 th bit

More information

AL625 & AL625HD INSTALLATION & OWNER S MANUAL

AL625 & AL625HD INSTALLATION & OWNER S MANUAL AL625 & AL625HD INSTALLATION & OWNER S MANUAL These instructions are provided to assist you in the installation of the AL625. If you require further assistance, our trained staff is ready to provide you

More information

Installation Instructions Supertop for Truck

Installation Instructions Supertop for Truck Installation Instructions Supertop for Truck Vehicle Application: Ford F-150 5.5 Ft. Styleside 2004 and newer Part Number: 76309 www.bestop.com - We re here to help! Visit our web site and click on Ask

More information

ROLL UP DOOR TRADITIONAL HANDLE BAR INSTALLATION INSTRUCTIONS

ROLL UP DOOR TRADITIONAL HANDLE BAR INSTALLATION INSTRUCTIONS ROLL UP DOOR TRADITIONAL HANDLE BAR INSTALLATION INSTRUCTIONS ***** READ ALL INSTRUCTIONS BEFORE ***** ATTEMPTING INSTALLATION OF YOUR ROLL UP DOOR PRODUCT DOC NO: INST00001 REV: 11 CHG:STB APR: PJC ECN:

More information

Installation Instructions Table of Contents

Installation Instructions Table of Contents Installation Instructions Table of Contents Pre- Installation of Garage Storage Lift 2 Layout the Garage Storage Lift 3 Installing the strut Channels 3 Install the Drive Assembly 5 Install the Drive Shaft

More information

1-3/8 Designer Metals Telescoping Traversing Rod Installation Instructions

1-3/8 Designer Metals Telescoping Traversing Rod Installation Instructions 1-3/8 Designer Metals Telescoping Traversing Rod Installation Instructions Please read and follow all installation instructions provided for proper operation and enjoyment of your new drapery hardware

More information

Installation Instructions EZ Roll Tonneau

Installation Instructions EZ Roll Tonneau Installation Instructions EZ Roll Tonneau Vehicle Application: Dodge Ram 6.4' bed 06-08 1500 & 06-09 2500/3500 W/TAILGATE SPOILER : 19239 www.bestop.com - We re here to help! Visit our web site and click

More information

The Radiance Roller Shade Collection

The Radiance Roller Shade Collection The Radiance Roller Shade Collection Beautiful, durable and available in an assortment of colors and patterns, Elite s Radiance Roller Shade Collection offers a host of attractive features: u Plain bottom

More information

INSTALLATION INSTRUCTIONS AND OWNER S MANUAL

INSTALLATION INSTRUCTIONS AND OWNER S MANUAL INSTALLATION INSTRUCTIONS AND OWNER S MANUAL Thank you for purchasing the AlloyCover from WeatherTech. Manufactured with pride using superior quality materials and workmanship. With proper care, your cover

More information

Installation Instructions Supertop NX Twill

Installation Instructions Supertop NX Twill Installation Instructions Supertop NX Twill Vehicle Application: Jeep Wrangler Unlimited 2007-current Part Number 54823 Installation Tips Before you begin installing your new Supertop NX Twill, please

More information

Installation and Operating Instructions Luxaflex Silhouette Shade

Installation and Operating Instructions Luxaflex Silhouette Shade Installation and Operating Instructions Luxaflex Silhouette Shade UK STANDARD INSTALLATION General information It is very important to follow these installation and operating instructions exactly. We cannot

More information

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> B&W

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> B&W B&W Trailer Hitches 1216 Hawaii Rd / PO Box 186 Humboldt, KS 66748 P:620.473.3664 F:620.869.9031 Turnoverball Gooseneck Hitch Installation Instructions

More information

MOTORIZED ROLLER SHADES PROGRAMMING GUIDE OTTO RECHARGE OTTO RECHARGE PLUS OTTO RECHARGE MAX

MOTORIZED ROLLER SHADES PROGRAMMING GUIDE OTTO RECHARGE OTTO RECHARGE PLUS OTTO RECHARGE MAX MOTORIZED ROLLER SHADES PROGRAMMING GUIDE OTTO RECHARGE OTTO RECHARGE PLUS OTTO RECHARGE MAX REMOTE CONTROL BASICS Wall Mount Holder Remove cover from base by prying with flat head screwdriver. Use supplied

More information

Installation Operation Care

Installation Operation Care Installation Operation Care A B OPEN CLOSE Duette and Applause Honeycomb Shades PowerRise 2.0 with Platinum Technology Motorized Lifting System CONTENTS Getting Started: Product View... 1 Tools and Fasteners

More information

R-Series R-Series Fabrication

R-Series R-Series Fabrication R-Series R-Series Fabrication 1. CALCULATE THE EXACT WIDTH OF A SHADE - DIMENSION C a. Measure dimension ( A ), the distance between the outside of the brackets. INSIDE MOUNT Measure inside the frame.

More information

TOYOTA RAV4/HV INTERIOR LIGHT KIT Preparation

TOYOTA RAV4/HV INTERIOR LIGHT KIT Preparation Preparation Part Number: PT413-42130 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 3 Hardware Bag Contents Item # Quantity Reqd. Description 1 20 Cable Tie 2 2 Scotchlok 3 2 Foam Pad

More information

Stowe Cargo Management System

Stowe Cargo Management System Installation Guide Stowe Cargo Management System Table of Contents 1. Pre-Installation (Page 2) a. Notes, Installation Kit contents & Tools needed 2. How to Install the Stowe Cargo Management System (Pages

More information

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> B&W

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER> B&W B&W Trailer Hitches 6 Hawaii Rd / PO Box 86 Humboldt, KS 66748 P:60.473664 F:60.869.903 Turnoverball Gooseneck Hitch Installation Instructions MODEL 08

More information

Installation Instructions EZ Roll Tonneau

Installation Instructions EZ Roll Tonneau Installation Instructions EZ Roll Tonneau Vehicle Application: Chevy S10/GMC S-15 6' bed 94-2003 : 19019 www.bestop.com - We re here to help! Visit our web site and click on Ask a Question. Click here

More information

Replace - A - Top Installation Instructions

Replace - A - Top Installation Instructions Replace - A - Top Installation Instructions For: Suzuki Samurai Part Number: 51361 Congratulations on your purchasing decision. Bestop designed this Convertible Top to give you years of dependability and

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Thank you for purchasing a LOMAX TM Hard Tri-Fold or Professional Series Cover. Agri-Cover, Inc. proudly manufactured this cover using superior quality materials and workmanship.

More information

Ford Mustang V6 OEM-Style Fog Light Kit Parts List: Quantity: Tool List:

Ford Mustang V6 OEM-Style Fog Light Kit Parts List: Quantity: Tool List: 2015-2017 Ford Mustang V6 OEM-Style Fog Light Kit Parts List: Quantity: Tool List: LED Foglights/ Bezels 2 Flat head & Phillips screwdriver (if you ordered part#3600) Ratchet & Socket set OR Wiring harness

More information

Legacy Installation Manual

Legacy Installation Manual Staying Home Corporation 1503 Vine Street P.O. Box 37 Harrisonville, MO 64701 816.380.2427 www.stayinghome.com A. INSTALLATION SITE REQUIREMENTS Legacy Installation Manual I. PRELIMINARY CHECKS 115 VAC,

More information

LUMINETTE PRIVACY SHEERS

LUMINETTE PRIVACY SHEERS LUMINETTE PRIVACY SHEERS REPLACES ISSUE DATE: NOVEMBER 2015 APPROVED BY: S. GONZALEZ PAGE 1 OF 38 LUMINETTE Privacy Sheers - Diagram Standard Parts REPLACES ISSUE DATE: NOVEMBER 2015 APPROVED BY: S. GONZALEZ

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Thank you for purchasing VANISH Roll-Up Cover. Agri-Cover, Inc. proudly manufactured this cover using superior quality materials and workmanship. With proper care, your cover

More information