Electric cylinders ESBF, with spindle drive

Transcription

1 q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch from the Festo factory in 24 hours Held in stock in 13 service centres worldwide More than 2200 products wready for dispatch in 5 days maximum from stock Assembled for you in 4 service centres worldwide Up to 6 x variants per product series Look for the star!

2 Key features At a glance The electric cylinder ESBF is a mechanical linear drive unit with piston rod. The driving component consists of an electrically actuated spindle that converts the rotary motion of the motor into a linear motion of the piston rod. The electric cylinder is based on the ISO standard. The mechanical interfaces are largely compatible with the standards-based cylinder DSBF. Two spindle types to choose from: Size 32 50: Ball screw (BS) Lead screw (LS) Size : Ball screw (BS) Options: High corrosion protection Degree of protection IP65 Piston rod extension NSF-H1 lubricant for food & beverage applications Wide range of accessories Complete system consisting of electric cylinder, motor and motor mounting kit Electric cylinder page 4 Motor page 25 -H- Note A range of specially adapted complete solutions is available for the electric cylinder ESBF and the motors. Motor mounting kit page 25 Axial kit Parallel kit Complete kits are available for both parallel and axial motor mounting. Protective bellows kit EADB for use in dusty environments page 38 1 The protective bellows kit is a leakfree system. To prevent unwanted media from being drawn in, the supply and exhaust air for the kit must be ducted via a pressure compensation hole in the connection part 1. The kit protects the piston rod, seal and bearings against a wide variety of media, for example: Dust Chippings Oil Grease Petrol 2 Internet: Subject to change 2017/10

3 Features and type codes Degree of protection IP65 (feature S1) for use in wet environments page 24 1 The electric cylinder to IP65 fulfils the specifications to IEC Air is exchanged between the interior of the cylinder and the environment via a pressure compensation hole 1. This prevents negative pressure or excess pressure arising in the interior of the cylinder. It also prevents unwanted media being drawn in. Sealing air can also be applied to the pressure compensation hole if needed (e.g. during a cleaning process). NSF-H1 lubricant for food & beverage applications (feature F1) The electric cylinder is of limited suitability for the food industry. Can only be selected in combination with the ball screw (BS) drive system. NSF-H1 lubricant for piston rod, screw spindle and other parts. Further information on materials technical hotline Type codes ESBF BS P F Type ESBF Electric cylinder Drive system BS LS Ball screw Lead screw Size Stroke [mm] Spindle pitch [mm/rev] Variant F S1 R3 F1 E Female thread Degree of protection IP65 High corrosion protection Suitable for use in the food industry as per extended information on materials Piston rod extension 2017/10 Subject to change Internet: 3

4 Peripherals overview aj aa ab bd bf bd bh 7 be cj bi bg 8 af ag bb ah ac ad ai bj bc aa ba -H- Note The maximum load carrying ability of the mounting parts must be greater than the maximum occurring load. The weight of the cylinder including the motor must be factored in. ae Mounting components and accessories Description Suitable for high forces 1) Page/Internet 1 Swivel flange DAMS With parallel motor mounting, for spherical bearing 49 2 Foot mounting HNC/CRHNC For mounting the cylinder. The foot mounting can only be secured at the rear, on the parallel kit 44 3 Trunnion flange ZNCF/CRZNG For spherical bearing 46 4 Swivel flange SNC With parallel motor mounting 50 5 Swivel flange SNCS/CRSNCS/SNCS- -R3 With parallel motor mounting 51 1) Shows which accessories can be used within the entire force range. For restricted force ranges see the relevant accessory part, from page Internet: Subject to change 2017/10

5 Peripherals overview Mounting components and accessories Description Suitable for high forces 1) Page/Internet 6 Swivel flange SNCL With parallel motor mounting 52 7 Swivel flange SNCB/SNCB- -R3 With parallel motor mounting, for spherical bearing 53 8 Trunnion support LNZG/CRLNZG For cylinders with trunnion mounting 47 9 Clevis foot LSNG With parallel motor mounting, with spherical bearing 55 aj Clevis foot LSNSG With parallel motor mounting, weld-on, with spherical bearing 55 aa Clevis foot LBG/LBG- -R3 With parallel motor mounting, for spherical bearing 55 ab Clevis foot LNG/CRLNG With parallel motor mounting 55 ac Right-angle clevis foot LQG For rod eye SGS 55 ad Rod clevis SGA For swivel mounting of cylinders 56 ae Guide unit EAGF For protecting electric cylinders against rotation at high torque loads Cannot be used in combination with protective bellows kit EADB 57 af Protective bellows kit EADB Protects the cylinder (piston rod, seal and bearings) against a wide range of media and thus prevents premature wear The kit can only be used in combination with an extended piston rod ( E) 38 ag Rod eye SGS/CRSGS With spherical bearing 56 ah Coupling piece KSZ To compensate for radial deviations 56 ai Rod clevis SG/CRSG Permits a swivel motion of the cylinder in one plane 56 bj Self-aligning rod coupler FK/CRFK For compensating radial and angular misalignments 56 ba Flange mounting EAHH On the bearing cap Cannot be used in combination with protective bellows kit EADB 45 bb Trunnion mounting kit DAMT For mounting anywhere along the cylinder profile barrel. Cannot be mounted in the vicinity of the motor with parallel motor mounting 54 bc Profile mounting EAHF- -P For mounting the electric cylinder via the profile Cannot be mounted in combination with the parallel kit EAMM-U with some combinations (in the vicinity of the motor) 43 bd Proximity sensor SMT/CRSMT-8 For position sensing 59 be Mounting kit CRSMB For proximity sensor with T-slot 58 bf Sensor rail SAMH For proximity sensor with T-slot 58 bg Blanking screw DAMD-PS For covering unused mounting threads 59 bh Parallel kit EAMM-U For parallel motor mounting 34 bi Axial kit EAMM-A For axial motor mounting 25 cj Mounting kit SMB-8-FENG For proximity sensor with T-slot 58 1) Shows which accessories can be used within the entire force range. For restricted force ranges see the relevant accessory part, from page /10 Subject to change Internet: 5

6 Technical data Function -N- Size T- Stroke length mm -W- General technical data Size Based on standard ISO Design Electric cylinder with ball screw or lead screw Electric cylinder with ball screw Piston rod thread Male thread M10x1.25 M12x1.25 M16x1.5 M16x1.5 M20x1.5 M20x1.5 Female thread M6 M8 M10 M10 M12 M12 Working stroke [mm] Protection against torsion/guide With plain-bearing guide Duty cycle [%] 100 Position sensing For proximity sensor Type of mounting With female thread/accessories Mounting position Any Mechanical data Ball screw Size Spindle pitch [mm/rev] Spindle diameter [mm] Max. force of the cylinder 1) [kn] Max. driving torque [Nm] Max. radial force 2) [N] Max. speed [m/s] Max. rotational speed [rpm] Max. acceleration [m/s 2 ] Max. angle of rotation at the piston rod 3) [ ] ±0.25 ±0.2 ±0.15 Reversing backlash 3) [mm] Repetition accuracy [mm] ±0.01 No-load driving torque 4) [Nm] Size Spindle pitch [mm/rev] Spindle diameter [mm] Max. force of the cylinder 1) [kn] Max. driving torque [Nm] Max. radial force 2) [N] Max. speed [m/s] Max. rotational speed [rpm] Max. acceleration [m/s 2 ] Max. angle of rotation at the piston rod 3) [ ] ±0.4 ±0.5 ±0.5 Reversing backlash 3) [mm] Repetition accuracy [mm] ±0.015 ±0.01 No-load driving torque 4) [Nm] ) The pressure force is dependent on the stroke and has an effect on the service life 10 2) On the drive shaft 3) In new condition 4) At a spindle speed of 200 rpm 6 Internet: Subject to change 2017/10

7 Technical data Mechanical data Lead screw Size Spindle pitch [mm/rev] Spindle diameter [mm] Max. force of the cylinder 1) [kn] Max. driving torque [Nm] Max. radial force 2) [N] Max. speed [m/s] Max. rotational speed [rpm] Max. acceleration [m/s 2 ] Max. angle of rotation at the piston rod [ ] ±0.25 ±0.2 ±0.15 Reversing backlash 3) [mm] Repetition accuracy [mm] ±0.05 No-load driving torque 4) [Nm] ) Electric cylinder with lead screw can be operated with maximum force over the entire stroke range. 2) On the drive shaft 3) In new condition 4) At a spindle speed of 200 rpm Weight [g] Ball screw Size Basic weight m 0 at 0 mm stroke Additional weight m 10 per 10 mm stroke Moving mass m b0 at 0 mm stroke Moving mass m b10 per 10 mm stroke Weight [g] Lead screw Size Basic weight m 0 at 0 mm stroke Additional weight m 10 per 10 mm stroke Moving mass m b0 at 0 mm stroke Moving mass m b10 per 10 mm stroke Total weight m ges. : Total moving mass m bges. : m ges. m 0 m 10 stroke 10 m bges. m b0 m b10 stroke /10 Subject to change Internet: 7

8 Technical data Operating and environmental conditions Ambient temperature 1) [ C] Storage temperature [ C] Degree of protection to IEC ESBF- IP40 ESBF- -S1 IP65 Relative air humidity [%] 0 95 (non-condensing) Duty cycle [%] 100 Suitable for use in the food industry with ESBF- -F1 2) extended information on materials Corrosion resistance class CRC 3) ESBF- 2 ESBF- -R3 3 1) Note operating range of proximity sensors and motors 2) Extended information on materials on request technical hotline Only in combination with ESBF-BS- (ball screw) 3) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. Corrosion resistance class CRC 3 to Festo standard FN High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment. Mass moment of inertia Ball screw Size Spindle pitch [mm/rev] J 0 at 0 mm stroke [kg cm 2 ] J H per meter stroke [kg cm 2 /m] J L per kg payload [kg cm 2 /kg] Size Spindle pitch [mm/rev] J 0 at 0 mm stroke [kg cm 2 ] J H per meter stroke [kg cm 2 /m] J L per kg payload [kg cm 2 /kg] Mass moment of inertia Lead screw Size Spindle pitch [mm/rev] J 0 at 0 mm stroke [kg cm 2 ] J H per meter stroke [kg cm 2 /m] J L per kg payload [kg cm 2 /kg] The mass moment of inertia J A of the electric cylinder is calculated as follows: J A = J 0 + j H x working stroke [m] + j L x m payload [kg] 8 Internet: Subject to change 2017/10

9 Technical data Materials Sectional view Size Dust protection TPE-U 2 Bearing cap Coated wrought aluminium alloy Coated gravity die-cast aluminium 3 Cylinder barrel Smooth anodised wrought aluminium alloy 4 Piston rod High-alloy stainless steel 5 Spindle ESBF-BS- Rolled steel ESBF-LS- High-strength steel 6 Spindle nut ESBF-BS- ESBF-LS- Rolled steel POM with PTFE 7 Flat seal (at ESBF- -S1) Fibre-reinforced thermoplastic 8 Drive cover Coated wrought aluminium alloy Coated gravity die-cast aluminium Note on materials RoHS compliant Contains paint-wetting impairment substances Lateral force Fq as a function of stroke length l Fq l ESBF-32 ESBF-40 ESBF-50, 63 ESBF-80, /10 Subject to change Internet: 9

10 Technical data Max. pressure force F dependent on piston rod length l (I = stroke + optional piston rod extension) F Due to possible buckling, the pressure force must be limited dependent on the stroke. The tensile force is not affected by this. For ball screw ESBF-BS-32- ESBF-BS-40- ESBF-BS-50- ESBF-BS P/10P ESBF-BS-63- ESBF-BS P/10P ESBF-BS P ESBF-BS P/10P ESBF-BS P ESBF-BS P/10P ESBF-BS P 10 Internet: Subject to change 2017/10

11 Technical data Max. pressure force F dependent on piston rod length l (I = stroke + optional piston rod extension) F Due to possible buckling, the pressure force must be limited dependent on the stroke. The tensile force is not affected by this. For ball screw ESBF-BS-80- ESBF-BS-100- ESBF-BS P/15P ESBF-BS P ESBF-BS P/20P ESBF-BS P For lead screw ESBF-LS- ESBF-LS-32 ESBF-LS-40 ESBF-LS /10 Subject to change Internet: 11

12 Technical data Max. feed speed v as a function of stroke length l For ball screw ESBF-BS-32- ESBF-BS-40- ESBF-BS-50- ESBF-BS P ESBF-BS P ESBF-BS-63- ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS-80- ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS-100- ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P 12 Internet: Subject to change 2017/10

13 Technical data Maximum feed force F dependent on the feed speed v For ball screw ESBF-BS-32- ESBF-BS-40- ESBF-BS-50- ESBF P ESBF P ESBF-BS-63- ESBF P ESBF P ESBF P ESBF-BS-80- ESBF P ESBF P ESBF P ESBF-BS-100- ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P 2017/10 Subject to change Internet: 13

14 Technical data Maximum feed force F dependent on the feed speed v For lead screw ESBF-LS- ESBF-LS-32 ESBF-LS-40 ESBF-LS-50 Service life The service life of the electric cylinder depends largely on that of the lead screw. The operating coefficient plays a considerable role in determining the possible service life and it can be determined with the help of the table ( 15) The operating coefficient for the variant ESBF- -F1 (NSF-H1 lubricant for food & beverage applications) matches that for the standard type The service life ends when the maximum number of switching cycles or maximum running performance has been reached: ESBF BS: 10 million ESBF LS: 15 (below) The distance between the foremost and rearmost positions must be at least 2.5 times the spindle pitch per travel cycle. The specifications for running performance are based on experimentally determined and theoretically calculated data (at room temperature). The running performance that can be achieved in practice can deviate considerably from the specified curves under different parameters Calculation of the mean feed force F xm with ball screw (ESBF-BS) F xm 3 F xm F x1/n s 1/n F x1 3 s1 F n 3 sn s 1 s n = Mean feed force = Feed force of section = Share of movement cycle that is travel Fx [N] F x 1 F x 2 F x 3 s1 s2 s3 s [100%] F xmax F xm Mean feed force F xm as a function of running performance L, with an operating coefficient f B of 1.0 at room temperature For ball screw ESBF-BS-32- ESBF-BS-40- ESBF P ESBF P ESBF P ESBF P ESBF P 14 Internet: Subject to change 2017/10

15 Technical data Service life Mean feed force F xm as a function of running performance L, with an operating coefficient f B of 1.0 at room temperature For ball screw ESBF-BS-50- ESBF-BS-63- ESBF-BS-80- ESBF P ESBF P ESBF P ESBF-BS-100- ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P Life cycle taking into account the operating coefficient L Load 1) Operating coefficient f B Sample application ist L 3 f B L ist L f B = Actual service life = Target service life ( graphs) = Operating coefficient None Measuring machine Lightweight Handling, robot technology Medium Press-in operations High Construction, agriculture 1) This refers to loads caused by impacts, temperatures, contamination, shock and vibrations that affect the cylinder or piston rod. Reference values for lead screw (ESBF-LS) Size Running performance L [km] Stress cycles L 1) [million] Switching cycles L 2) [million] ) Movement from position A to B with acceleration and deceleration to stop. 2) Two stress cycles to get back to the starting point. 2017/10 Subject to change Internet: 15

16 Technical data Friction losses and driving torque Friction losses The friction losses comprise the no-load driving torque and the speeddependent friction losses. M reib M leerlauf M V M reib = Friction torque M leerlauf = No-load driving torque M V = Friction torque dependent on the feed speed Driving torque The driving torque required for the cylinder comprises the friction torque and the effective torque. M antrieb M reib M nutz M antrieb = Required driving torque M reib = Friction torque M nutz = Effective torque No-load driving torque Ball screw 1) Size Spindle pitch [mm/rev] No-load driving torque M leerlauf [Nm] Size Spindle pitch [mm/rev] No-load driving torque M leerlauf [Nm] No-load driving torque Lead screw 1) Size Spindle pitch [mm/rev] No-load driving torque M leerlauf [Nm] ) Corresponds to the required driving torque without load, at a spindle speed of 200 rpm. 16 Internet: Subject to change 2017/10

17 Technical data Friction torque M V as a function of feed speed v For ball screw ESBF-BS-32- ESBF-BS-40- ESBF-BS-50- ESBF-BS P ESBF-BS P ESBF-BS-63- ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS-80- ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS-100- ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P 2017/10 Subject to change Internet: 17

18 Technical data Friction torque M V as a function of feed speed v For lead screw ESBF-LS- ESBF-LS-32 ESBF-LS-40 ESBF-LS-50 Effective torque M nutz as a function of feed force F For ball screw ESBF-BS-32- ESBF-BS-40- ESBF-BS-50- ESBF-BS P ESBF-BS P ESBF-BS-63- ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P 18 Internet: Subject to change 2017/10

19 Technical data Effective torque M nutz as a function of feed force F For ball screw ESBF-BS-80- ESBF-BS-100- ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P For lead screw ESBF-LS- ESBF-LS-32 ESBF-LS-40 ESBF-LS /10 Subject to change Internet: 19

20 Technical data Dimensions Download CAD data + = plus stroke length Size [mm] AM 0.5 B d11 BG Min. D1 H9 D2 H6 D3 f7 E G / / / Size [mm] G1 L1 L2 L3 L4 0.2 L5 Min. KK MM / / M10x / / M12x / / M16x / M16x / M20x / M20x Size RT TG VA VD WH ZJ ß1 ß2 ß3 [mm] 32 M / / M / / M / / M / M / M / Internet: Subject to change 2017/10

21 Technical data Dimensions Variants E Piston rod extension F Female thread Download CAD data S1 Protection class IP65/F1 for the food industry ESBF ESBF Size A2 D4 EE L5 L6 K1 KT WH [mm] Max. 0.2 Min M M / M M / M M / Gx M / Gx M / Gx M / /10 Subject to change Internet: 21

22 Technical data Ordering data Standard design Ball screw Spindle pitch Stroke Part No. Type Spindle pitch Stroke Part No. Type [mm/rev] [mm] [mm/rev] [mm] ESBF-32 ESBF w ESBF-BS P w ESBF-BS P 200 w ESBF-BS P 200 w ESBF-BS P 300 w ESBF-BS P 300 w ESBF-BS P 400 w ESBF-BS P 400 w ESBF-BS P w ESBF-BS P w ESBF-BS P 200 w ESBF-BS P 200 w ESBF-BS P 300 w ESBF-BS P 300 w ESBF-BS P 400 w ESBF-BS P 400 w ESBF-BS P w ESBF-BS P 200 w ESBF-BS P 300 w ESBF-BS P 400 w ESBF-BS P ESBF-40 ESBF w ESBF-BS P w ESBF-BS P 200 w ESBF-BS P 200 w ESBF-BS P 300 w ESBF-BS P 300 w ESBF-BS P 400 w ESBF-BS P 400 w ESBF-BS P w ESBF-BS P w ESBF-BS P 200 w ESBF-BS P 200 w ESBF-BS P 300 w ESBF-BS P 300 w ESBF-BS P 400 w ESBF-BS P 400 w ESBF-BS P w ESBF-BS P w ESBF-BS P 200 w ESBF-BS P 200 w ESBF-BS P 300 w ESBF-BS P 300 w ESBF-BS P 400 w ESBF-BS P 400 w ESBF-BS P -H- Note Order variable strokes and variants via the modular product system page Internet: Subject to change 2017/10

23 Technical data Ordering data Standard design Ball screw Spindle pitch Stroke Part No. Type Spindle pitch Stroke Part No. Type [mm/rev] [mm] [mm/rev] [mm] ESBF-80 ESBF ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF-BS P ESBF- BS P ESBF-BS P ESBF- BS P ESBF-BS P ESBF- BS P ESBF-BS P ESBF- BS P ESBF-BS P ESBF- BS P ESBF-BS P ESBF- BS P ESBF-BS P ESBF- BS P ESBF-BS P ESBF- BS P Ordering data Standard design Lead screw Spindle pitch Stroke Part No. Type [mm/rev] [mm] ESBF ESBF-LS P ESBF-LS P ESBF-LS P ESBF-LS P ESBF ESBF-LS P ESBF-LS P ESBF-LS P ESBF-LS P ESBF ESBF-LS P ESBF-LS P ESBF-LS P ESBF-LS P -H- Note Order variable strokes and variants via the modular product system page /10 Subject to change Internet: 23

24 Ordering data Modular products Ordering table Size Conditions Code Entry code 0M Module no Function Electric cylinder ESBF ESBF Drive system Ball screw 1 -BS Lead screw 2 -LS Size Stroke [mm] Spindle pitch [mm] P O Piston rod thread type Male thread Female thread -F Degree of protection for electrics Standard IP65 -S1 Corrosion protection Standard High corrosion protection 3 -R3 Additional features None Suitable for use in the food industry as per extended information on materials 4 -F1 Piston rod extension None E 1 BS Only with spindle pitch 5P, 10P, 15P, 16P, 20P, 25P, 32P, 40P 2 LS Only with spindle pitch 2.5P, 3P, 4P 3 R3 Only with S1 4 F1 Only with R3 Not with LS M O Mandatory data Options Transfer order code ESBF 24 Internet: Subject to change 2017/10

25 -H- Note Depending on the combination of motor and drive, it may not be possible to reach the maximum feed force of the drive. When using parallel kits, the no-load driving torque of the respective kit must be taking into consideration. Permissible axis/motor combinations with axial kit Motor/gear unit 1) Axial kit Technical data Internet: eamm-a Type Part No. Type ESBF-32 With servo motor EMME-AS-40- w EAMM-A-D32-40P EAMM-A-D32-40P-S1 2) EMMS-AS EAMM-A-D32-40A EAMM-A-D32-40A-S1 2) EMMS-AS EAMM-A-D32-55A EAMM-A-D32-55A-S1 2) EMME-AS-60- w EAMM-A-D32-60P EAMM-A-D32-60P-S1 2) With servo motor and gear unit EMME-AS-40- EMGA-40-P-G -EAS-40 EMMS-AS-40- EMGA-40-P-G -SAS-40 EMMS-AS-55- EMGA-60-P-G -SAS-55 EMME-AS-60- EMGA-60-P-G -EAS-60 EMMS-AS-70- EMGA-60-P-G -SAS EAMM-A-D32-40G EAMM-A-D32-40G-S1 2) EAMM-A-D32-40G EAMM-A-D32-40G-S1 2) EAMM-A-D32-60G EAMM-A-D32-60G-S1 2) EAMM-A-D32-60H EAMM-A-D32-60H-S1 2) EAMM-A-D32-60G EAMM-A-D32-60G-S1 2) With stepper motor EMMS-ST-42- w EAMM-A-D32-42A EAMM-A-D32-42A-S1 2) EMMS-ST-57- w EAMM-A-D32-57A EAMM-A-D32-57A-S1 2) With stepper motor and gear unit EMMS-ST-42- EMGA-40-P-G -SST-42 EMMS-ST-57- EMGA-60-P-G -SST EAMM-A-D32-40G EAMM-A-D32-40G-S1 2) EAMM-A-D32-60G EAMM-A-D32-60G-S1 2) With integrated drive EMCA-EC EAMM-A-D32-67A EAMM-A-D32-67A-S1 2) 1) The input torque must not exceed the maximum permissible transferable torque of the axial kit. 2) With degree of protection IP65 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/10 Subject to change Internet: 25

26 Permissible axis/motor combinations with axial kit Motor 1) Axial kit Technical data Internet: eamm-a Type Part No. Type ESBF-32 With integrated drive and gear unit EMCA-EC-67- EMGC-40- EMCA-EC-67- EMGC EAMM-A-D32-40G EAMM-A-D32-40G-S1 2) EAMM-A-D32-60H EAMM-A-D32-60H-S1 2) ESBF-40 With servo motor EMMS-AS EAMM-A-D40-55A EAMM-A-D40-55A-S1 2) EMME-AS-60- w EAMM-A-D40-60P EAMM-A-D40-60P-S1 2) EMMS-AS EAMM-A-D40-70A EAMM-A-D40-70A-S1 2) With servo motor and gear unit EMME-AS-40- EMGA-40-P-G -EAS-40 EMMS-AS-40- EMGA-40-P-G -SAS-40 EMMS-AS-55- EMGA-60-P-G -SAS-55 EMME-AS-60- EMGA-60-P-G -EAS-60 EMMS-AS-70- EMGA-60-P-G -SAS EAMM-A-D40-40G-G EAMM-A-D40-40G-S1 2) EAMM-A-D40-40G-G EAMM-A-D40-40G-S1 2) EAMM-A-D40-60G EAMM-A-D40-60G-S1 2) EAMM-A-D40-60H EAMM-A-D40-60H-S1 2) EAMM-A-D40-60G EAMM-A-D40-60G-S1 2) With stepper motor EMMS-ST-57- w EAMM-A-D40-57A EAMM-A-D40-57A-S1 2) EMMS-ST-87- w EAMM-A-D40-87A EAMM-A-D40-87A-S1 2) With stepper motor and gear unit EMMS-ST-42- EMGA-40-P-G -SST-42 EMMS-ST-57- EMGA-60-P-G -SST EAMM-A-D40-40G-G EAMM-A-D40-40G-S1 2) EAMM-A-D40-60G EAMM-A-D40-60G-S1 2) With integrated drive EMCA-EC EAMM-A-D40-67A EAMM-A-D40-67A-S1 2) With integrated drive and gear unit EMCA-EC-67- EMGC-40- EMCA-EC-67- EMGC EAMM-A-D40-40G-G EAMM-A-D40-40G-S1 2) EAMM-A-D40-60H EAMM-A-D40-60H-S1 2) 1) The input torque must not exceed the maximum permissible transferable torque of the axial kit. 2) With degree of protection IP65 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 26 Internet: Subject to change 2017/10

27 Permissible axis/motor combinations with axial kit Motor 1) Axial kit Technical data Internet: eamm-a Type Part No. Type ESBF-50 With servo motor EMMS-AS EAMM-A-D50-70A EAMM-A-D50-70A-S1 2) EMME-AS-80- w EAMM-A-D50-80P EAMM-A-D50-80P-S1 2) EMME-AS-100- w EAMM-A-D50-100A EAMM-A-D50-100A-S1 2) EMMS-AS-100- w EAMM-A-D50-100A EAMM-A-D50-100A-S1 2) With servo motor and gear unit EMMS-AS-55- EMGA-60-P-G -SAS-55 EMME-AS-60- EMGA-60-P-G -EAS-60 EMMS-AS-70- EMGA-60-P-G -SAS-70 EMMS-AS-70- EMGA-80-P-G -SAS-70 EMME-AS-80- EMGA-80-P-G -EAS-80 EMME-AS-100- EMGA-80-P-G -SAS-100 EMMS-AS-100- EMGA-80-P-G -SAS EAMM-A-D50-60G EAMM-A-D50-60G-S1 2) EAMM-A-D50-60H EAMM-A-D50-60H-S1 2) EAMM-A-D50-60G EAMM-A-D50-60G-S1 2) EAMM-A-D50-80G EAMM-A-D50-80G-S1 2) EAMM-A-D50-80G EAMM-A-D50-80G-S1 2) EAMM-A-D50-80G EAMM-A-D50-80G-S1 2) EAMM-A-D50-80G EAMM-A-D50-80G-S1 2) With stepper motor EMMS-ST-87- w EAMM-A-D50-87A EAMM-A-D50-87A-S1 2) With stepper motor and gear unit EMMS-ST-57- EMGA-60-P-G -SST-57 EMMS-ST-87- EMGA-80-P-G -SST-87 With integrated drive and gear unit EMCA-EC-67- EMGC EAMM-A-D50-60G EAMM-A-D50-60G-S1 2) EAMM-A-D50-80G EAMM-A-D50-80G-S1 2) EAMM-A-D50-60H EAMM-A-D50-60H-S1 2) 1) The input torque must not exceed the maximum permissible transferable torque of the axial kit. 2) With degree of protection IP65 -H- Note The axial kit (without S1 in the type code) can be retrofitted with a seal set EADS-F to change the degree of protection from IP40 to IP65. Additional information eamm-a Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/10 Subject to change Internet: 27

28 Permissible axis/motor combinations with axial kit Motor 1) Axial kit Technical data Internet: eamm-a Type Part No. Type ESBF-63 With servo motor EMMS-AS EAMM-A-D60-70A EAMM-A-D60-70A-S1 2) EMME-AS-80- w EAMM-A-D60-80P EAMM-A-D60-80P-S1 2) EMME-AS EAMM-A-D60-100A EAMM-A-D60-100A-S1 2) EMMS-AS-100- w EAMM-A-D60-100A EAMM-A-D60-100A-S1 2) With servo motor and gear unit EMMS-AS-55- EMGA-60-P-G -SAS-55 EMME-AS-60- EMGA-60-P-G -EAS-60 EMMS-AS-70- EMGA-60-P-G -SAS-70 EMMS-AS-70- EMGA-80-P-G -SAS-70 EMME-AS-80- EMGA-80-P-G -EAS-80 EMME-AS-100- EMGA-80-P-G -SAS-100 EMMS-AS-100- EMGA-80-P-G -SAS EAMM-A-D60-60G-G EAMM-A-D60-60G-S1 2) EAMM-A-D60-60H EAMM-A-D60-60H-S1 2) EAMM-A-D60-60G-G EAMM-A-D60-60G-S1 2) EAMM-A-D60-80G EAMM-A-D60-80G-S1 2) EAMM-A-D60-80G EAMM-A-D60-80G-S1 2) EAMM-A-D60-80G EAMM-A-D60-80G-S1 2) EAMM-A-D60-80G EAMM-A-D60-80G-S1 2) With stepper motor EMMS-ST-87- w EAMM-A-D60-87A EAMM-A-D60-87A-S1 2) With stepper motor and gear unit EMMS-ST-57- EMGA-60-P-G -SST-57 EMMS-ST-87- EMGA-80-P-G -SST-87 With integrated drive and gear unit EMCA-EC-67- EMGC EAMM-A-D60-60G-G EAMM-A-D60-60G-S1 2) EAMM-A-D60-80G EAMM-A-D60-80G-S1 2) EAMM-A-D60-60H EAMM-A-D60-60H-S1 2) 1) The input torque must not exceed the maximum permissible transferable torque of the axial kit. 2) With degree of protection IP65 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 28 Internet: Subject to change 2017/10

29 Permissible axis/motor combinations with axial kit Motor 1) Axial kit Technical data Internet: eamm-a Type Part No. Type ESBF-80 With servo motor EMME-AS EAMM-A-D80-100A EAMM-A-D80-100A-S1 2) EMMS-AS EAMM-A-D80-100A EAMM-A-D80-100A-S1 2) EMMS-AS EAMM-A-D80-140A EAMM-A-D80-140A-S1 2) With servo motor and gear unit EMMS-AS-70- EMGA-80-P-G -SAS-70 EMME-AS-80- EMGA-80-P-G -EAS-80 EMME-AS-100- EMGA-80-P-G -SAS-100 EMMS-AS-100- EMGA-80-P-G -SAS-100 With stepper motor and gear unit EMMS-ST-87- EMGA-80-P-G -SST EAMM-A-D80-80G EAMM-A-D80-80G-S1 2) EAMM-A-D80-80G EAMM-A-D80-80G-S1 2) EAMM-A-D80-80G EAMM-A-D80-80G-S1 2) EAMM-A-D80-80G EAMM-A-D80-80G-S1 2) EAMM-A-D80-80G EAMM-A-D80-80G-S1 2) ESBF-100 With servo motor EMME-AS EAMM-A-D A EAMM-A-D A-S1 2) EMMS-AS EAMM-A-D A EAMM-A-D A-S1 2) EMMS-AS EAMM-A-D A EAMM-A-D A-S1 2) With servo motor and gear unit EMME-AS-100- EMGA-120-P-G -SAS-100 EMMS-AS-100- EMGA-120-P-G -SAS-100 EMMS-AS-140- EMGA-120-P-G -SAS EAMM-A-D G EAMM-A-D G-S1 2) EAMM-A-D G EAMM-A-D G-S1 2) EAMM-A-D G EAMM-A-D G-S1 2) 1) The input torque must not exceed the maximum permissible transferable torque of the axial kit. 2) With degree of protection IP65 -H- Note The axial kit (without S1 in the type code) can be retrofitted with a seal set EADS-F to change the degree of protection from IP40 to IP65. Additional information eamm-a 2017/10 Subject to change Internet: 29

30 Part components of the axial kit Axial kit Comprises: Motor flange Coupling Coupling housing Seal set Part No. Part No. Part No. Part No. Part No. Type Type Type Type Type ESBF EAMM-A-D32-40A EAMF-A-28B-40A EAMC EAMK-A-D32-28B EAMM-A-D32-40A-S1 1) EADS-F-D32-40A EAMM-A-D32-40G EAMF-A-44C-40G-S EAMC EAMK-A-D32-44A/C EAMM-A-D32-40G-S1 1) EADS-F-D32-40G w EAMM-A-D32-40P EAMF-A-28B-40P EAMC EAMK-A-D32-28B EAMM-A-D32-40P-S1 1) EADS-F-D32-40P w EAMM-A-D32-42A EAMF-A-28B-42A EAMC EAMK-A-D32-28B EAMM-A-D32-42A-S1 1) EADS-F-D32-42A EAMM-A-D32-55A EAMF-A-44A/B-55A EAMC EAMK-A-D32-44A/C EAMM-A-D32-55A-S1 1) EADS-F-D32-55A w EAMM-A-D32-57A EAMF-A-44A/B-57A EAMC EAMK-A-D32-44A/C EAMM-A-D32-57A-S1 1) EADS-F-D32-57A EAMM-A-D32-60G EAMF-A-44C-60G/H-S EAMC EAMK-A-D32-44A/C EAMM-A-D32-60G-S1 1) EADS-F-D32-60G/H EAMM-A-D32-60H EAMF-A-44C-60G/H-S EAMC EAMK-A-D32-44A/C EAMM-A-D32-60H-S1 1) EADS-F-D32-60G/H w EAMM-A-D32-60P EAMF-A-44C-60P EAMC EAMK-A-D32-44A/C EAMM-A-D32-60P-S1 1) EADS-F-D32-60P EAMM-A-D32-67A EAMF-A-44A/B/C-67A-S EAMC EAMK-A-D32-44A/C EAMM-A-D32-67A-S1 1) EADS-F-D32-67A 1) With degree of protection IP65 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 30 Internet: Subject to change 2017/10

31 Part components of the axial kit Axial kit Comprises: Motor flange Coupling Coupling housing Seal set Part No. Part No. Part No. Part No. Part No. Type Type Type Type Type ESBF EAMM-A-D40-40G-G EAMF-A-44C-40G-S EAMC EAMK-A-D40-44A/C EAMM-A-D40-40G-S1 1) EADS-F-D40-40G EAMM-A-D40-55A EAMF-A-44A/B-55A EAMC EAMK-A-D40-44A/C EAMM-A-D40-55A-S1 1) EADS-F-D40-55A w EAMM-A-D40-57A EAMF-A-44A/B-57A EAMC EAMK-A-D40-44A/C EAMM-A-D40-57A-S1 1) EADS-F-D40-57A EAMM-A-D40-60G EAMF-A-44C-60G/H-S EAMC EAMK-A-D40-44A/C EAMM-A-D40-60G-S1 1) EADS-F-D40-60G/H EAMM-A-D40-60H EAMF-A-44C-60G/H-S EAMC EAMK-A-D40-44A/C EAMM-A-D40-60H-S1 1) EADS-F-D40-60G/H w EAMM-A-D40-60P EAMF-A-44C-60P EAMC EAMK-A-D40-44A/C EAMM-A-D40-60P-S1 1) EADS-F-D40-60P EAMM-A-D40-67A EAMF-A-44A/B/C-67A-S EAMC EAMK-A-D32-44A/C EAMM-A-D40-67A-S1 1) EADS-F-D32-67A EAMM-A-D40-70A EAMF-A-44A/B-70A EAMC EAMK-A-D40-44A/C EAMM-A-D40-70A-S1 1) EADS-F-D40-70A w EAMM-A-D40-87A EAMF-A-44A/B-87A EAMC EAMK-A-D40-44A/C EAMM-A-D40-87A-S1 1) EADS-F-D40-87A 1) With degree of protection IP65 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/10 Subject to change Internet: 31

32 Part components of the axial kit Axial kit Comprises: Motor flange Coupling Coupling housing Seal set Part No. Part No. Part No. Part No. Part No. Type Type Type Type Type ESBF EAMM-A-D50-60G EAMF-A-64B-60G/H-S EAMC EAMK-A-D50-64B EAMM-A-D50-60G-S1 1) EADS-F-D50-60G/H EAMM-A-D50-60H EAMF-A-64B-60G/H-S EAMC EAMK-A-D50-64B EAMM-A-D50-60H-S1 1) EADS-F-D50-60G/H EAMM-A-D50-70A EAMF-A-64A/B-70A EAMC EAMK-A-D50-64B EAMM-A-D50-70A-S1 1) EADS-F-D50-70A EAMM-A-D50-80G EAMF-A-64C-80G-S EAMC EAMK-A-D50-64C EAMM-A-D50-80G-S1 1) EADS-F-D50-80G w EAMM-A-D50-80P EAMF-A-64A/C-80P EAMC EAMK-A-D50-64C EAMM-A-D50-80P-S1 1) EADS-F-D50-80P w EAMM-A-D50-87A EAMF-A-64A/B-87A EAMC EAMK-A-D50-64B EAMM-A-D50-87A-S1 1) EADS-F-D50-87A w EAMM-A-D50-100A EAMF-A-64A/C/D-100A EAMC EAMK-A-D50-64C EAMM-A-D50-100A-S1 1) EADS-F-D50-100A ESBF EAMM-A-D60-60G-G EAMF-A-64B-60G/H-S EAMC EAMK-A-D60-64B EAMM-A-D60-60G-S1 1) EADS-F-D60-60G/H EAMM-A-D60-60H EAMF-A-64B-60G/H-S EAMC EAMK-A-D60-64B EAMM-A-D60-60H-S1 1) EADS-F-D60-60G/H EAMM-A-D60-70A EAMF-A-64A/B-70A EAMC EAMK-A-D60-64B EAMM-A-D60-70A-S1 1) EADS-F-D60-70A 1) With degree of protection IP65 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 32 Internet: Subject to change 2017/10

33 Part components of the axial kit Axial kit Comprises: Motor flange Coupling Coupling housing Seal set Part No. Part No. Part No. Part No. Part No. Type Type Type Type Type ESBF EAMM-A-D60-80G EAMF-A-64C-80G-S EAMC EAMK-A-D60-64C EAMM-A-D60-80G-S1 1) EADS-F-D60-80G w EAMM-A-D60-80P EAMF-A-64A/C-80P EAMC EAMK-A-D60-64C EAMM-A-D60-80P-S1 1) EADS-F-D60-80P w EAMM-A-D60-87A EAMF-A-64A/B-87A EAMC EAMK-A-D60-64B EAMM-A-D60-87A-S1 1) EADS-F-D60-87A w EAMM-A-D60-100A EAMF-A-64A/C/D-100A EAMC EAMK-A-D60-64C EAMM-A-D60-100A-S1 1) EADS-F-D60-100A ESBF EAMM-A-D80-80G EAMF-A-77A-80G-S EAMC EAMK-A-D80-77A EAMM-A-D80-80G-S1 1) EADS-F-D80-80G EAMM-A-D80-100A EAMF-A-77A-100A EAMC EAMK-A-D80-77A EAMM-A-D80-100A-S1 1) EADS-F-D80-100A EAMM-A-D80-140A EAMF-A-77A-140A EAMC EAMK-A-D80-77A EAMM-A-D80-140A-S1 1) EADS-F-D80-140A ESBF EAMM-A-D A EAMF-A-77A-140A EAMC EAMK-A-D100-77A/B EAMM-A-D A-S1 1) EADS-F-D A EAMM-A-D A EAMF-A-77A-100A EAMC EAMK-A-D100-77A/B EAMM-A-D A-S1 1) EADS-F-D A EAMM-A-D G EAMF-A-77B-120G-S EAMC EAMK-A-D100-77A/B EAMM-A-D G-S1 1) EADS-F-D G 1) With degree of protection IP65 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/10 Subject to change Internet: 33

34 Permissible axis/motor combinations with parallel kit Motor/gear unit 1) Parallel kit Technical data Internet: eamm-u Components can be mounted to the kit facing any direction Optionally with degree of protection IP65 Use in combination with third-party motors on request Type Part No. Type ESBF-32 With servo motor EMME-AS-40- w EAMM-U-50-D32-40P EAMM-U-50-D32-40P-78-S1 2) EMMS-AS EAMM-U-50-D32-40A EAMM-U-50-D32-40A-78-S1 2) EMMS-AS EAMM-U-60-D32-55A EAMM-U-60-D32-55A-91-S1 2) EMME-AS-60- w EAMM-U-70-D32-60P EAMM-U-70-D32-60P-96-S1 2) EMMS-AS EAMM-U-70-D32-70A EAMM-U-70-D32-70A-96-S1 2) With stepper motor EMMS-ST-42- w EAMM-U-50-D32-42A EAMM-U-50-D32-42A-78-S1 2) EMMS-ST-57- w EAMM-U-60-D32-57A EAMM-U-60-D32-57A-91-S1 2) With gear unit EMGA-40-P-, EMGC-40-P EAMM-U-60-D32-40G EAMM-U-60-D32-40G-91-S1 2) EMGA-60-P- -SAS/SST 3) EAMM-U-70-D32-60G EAMM-U-70-D32-60G-96-S1 2) EMGA-60-P- -EAS, EMGC-60-P- 3) EAMM-U-70-D32-60H EAMM-U-70-D32-60H-96-S1 2) With motor unit 4) MTR-DCI-32S EAMM-U-50-D32-32B-78 MTR-DCI-42S EAMM-U-60-D32-42B/C-91 MTR-DCI-52S EAMM-U-70-D32-52B/C-96 ESBF-40 With servo motor EMMS-AS EAMM-U-60-D40-55A EAMM-U-60-D40-55A-91-S1 2) EMME-AS-60- w EAMM-U-70-D40-60P EAMM-U-70-D40-60P-96-S1 2) EMMS-AS EAMM-U-70-D40-70A EAMM-U-70-D40-70A-96-S1 2) EMMS-AS EAMM-U-86-D40-70A EAMM-U-86-D40-70A-102-S1 2) EMME-AS-80- w EAMM-U-86-D40-80P EAMM-U-86-D40-80P-102-S1 2) 1) The input torque must not exceed the maximum permissible transferable torque of the parallel kit. 2) With degree of protection IP65 3) Gear unit drive shaft diameter: EMGA-60-P- -SAS/-SST11 mm; EMGA-60-P- -EAS, EMGC-60-P14 mm 4) Only in combination with ESBF-LS- Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 34 Internet: Subject to change 2017/10

35 Permissible axis/motor combinations with parallel kit Motor/gear unit 1) Parallel kit Technical data Internet: eamm-u Components can be mounted to the kit facing any direction Optionally with degree of protection IP65 Use in combination with third-party motors on request Type Part No. Type ESBF-40 With stepper motor EMMS-ST-57- w EAMM-U-60-D40-57A EAMM-U-60-D40-57A-91-S1 2) EMMS-ST-87- w EAMM-U-86-D40-87A EAMM-U-86-D40-87A-102-S1 2) With gear unit EMGA-40-P-, EMGC-40-P EAMM-U-60-D40-40G EAMM-U-60-D40-40G-91-S1 2) EMGA-60-P- -SAS/SST EAMM-U-70-D40-60G EAMM-U-70-D40-60G-96-S1 2) EMGA-60-P- -EAS, EMGC-60-P- 3) EAMM-U-70-D40-60H EAMM-U-70-D40-60H-96-S1 2) EMGA-60-P- -SAS/SST EAMM-U-86-D40-60G EAMM-U-86-D40-60G-102-S1 2) EMGA-60-P- -EAS, EMGC-60-P- 3) EAMM-U-86-D40-60H EAMM-U-86-D40-60H-102-S1 2) With motor unit 4) MTR-DCI-42S EAMM-U-60-D40-42B/C-91 MTR-DCI-52S EAMM-U-70-D40-52B/C-96 MTR-DCI-52S EAMM-U-86-D40-52B/C-102 ESBF-50 With servo motor EMMS-AS EAMM-U-70-D50-70A EAMM-U-70-D50-70A-96-S1 2) EMME-AS-80- w EAMM-U-86-D50-80P EAMM-U-86-D50-80P-102-S1 2) EMME-AS-100- w EAMM-U-110-D50-100A EAMM-U-110-D50-100A-120-S1 2) EMMS-AS-100- w EAMM-U-110-D50-100A EAMM-U-110-D50-100A-120-S1 2) With stepper motor EMMS-ST-87- w EAMM-U-86-D50-87A EAMM-U-86-D50-87A-102-S1 2) 1) The input torque must not exceed the maximum permissible transferable torque of the parallel kit. 2) With degree of protection IP65 3) Gear unit drive shaft diameter: EMGA-60-P- -SAS/-SST11 mm; EMGA-60-P- -EAS, EMGC-60-P14 mm 4) Only in combination with ESBF-LS- -H- Note The clamping component EADT is required to adjust the toothed belt pretension with EAMM-U-110. The motor and/or axis shaft can optionally be supported with a counter bearing EAMG. Additional information eamm-u Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/10 Subject to change Internet: 35

36 Permissible axis/motor combinations with parallel kit Motor/gear unit 1) Parallel kit Technical data Internet: eamm-u Components can be mounted to the kit facing any direction Optionally with degree of protection IP65 Use in combination with third-party motors on request Type Part No. Type ESBF-50 With gear unit EMGA-60-P- -SAS/SST 3) EAMM-U-86-D50-60G EAMM-U-86-D50-60G-102-S1 2) EMGA-60-P- -EAS, EMGC-60-P- 3) EAMM-U-86-D50-60H EAMM-U-86-D50-60H-102-S1 2) EMGA-60-P- -SAS/SST 3) EAMM-U-110-D50-60G EAMM-U-110-D50-60G-120-S1 2) EMGA-60-P- -EAS, EMGC-60-P- 3) EAMM-U-110-D50-60H EAMM-U-110-D50-60H-120-S1 2) EMGA-80-P EAMM-U-110-D50-80G EAMM-U-110-D50-80G-120-S1 2) ESBF-63 With servo motor EMMS-AS EAMM-U-86-D60-70A EAMM-U-86-D60-70A-102-S1 2) EMME-AS-80- w EAMM-U-86-D60-80P EAMM-U-86-D60-80P-102-S1 2) EMME-AS-100- w EAMM-U-110-D60-100A EAMM-U-110-D60-100A-120-S1 2) EMMS-AS-100- w EAMM-U-110-D60-100A EAMM-U-110-D60-100A-120-S1 2) With stepper motor EMMS-ST-87- w EAMM-U-86-D60-87A EAMM-U-86-D60-87A-102-S1 2) With gear unit EMGA-60-P- -SAS/SST EAMM-U-86-D60-60G EAMM-U-86-D60-60G-102-S1 2) EMGA-60-P- -EAS, EMGC-60-P- 3) EAMM-U-86-D60-60H EAMM-U-86-D60-60H-102-S1 2) EMGA-60-P- -SAS/SST EAMM-U-110-D60-60G EAMM-U-110-D60-60G-120-S1 2) EMGA-60-P- -EAS, EMGC-60-P- 3) EAMM-U-110-D60-60H EAMM-U-110-D60-60H-120-S1 2) EMGA-80-P EAMM-U-110-D60-80G EAMM-U-110-D60-80G-120-S1 2) 1) The input torque must not exceed the maximum permissible transferable torque of the parallel kit. 2) With degree of protection IP65 3) Gear unit drive shaft diameter: EMGA-60-P- -SAS/-SST11 mm; EMGA-60-P- -EAS, EMGC-60-P14 mm -H- Note The clamping component EADT is required to adjust the toothed belt pretension with EAMM-U-110. The motor and/or axis shaft can optionally be supported with a counter bearing EAMG. Additional information eamm-u Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 36 Internet: Subject to change 2017/10

37 Permissible axis/motor combinations with parallel kit Motor/gear unit 1) Parallel kit Technical data Internet: eamm-u Components can be mounted to the kit facing any direction Optionally with degree of protection IP65 Use in combination with third-party motors on request Type Part No. Type ESBF-80 With servo motor EMME-AS EAMM-U-110-D80-100A EAMM-U-110-D80-100A-120-S1 2) EMMS-AS EAMM-U-110-D80-100A EAMM-U-110-D80-100A-120-S1 2) EMMS-AS EAMM-U-145-D80-140A EAMM-U-145-D80-140A-188-S1 2) With gear unit EMGA-80-P EAMM-U-110-D80-80G EAMM-U-110-D80-80G-120-S1 2) ESBF-100 With servo motor EMMS-AS EAMM-U-145-D A EAMM-U-145-D A-188-S1 2) With gear unit EMGA-120-P EAMM-U-145-D G EAMM-U-145-D G-188-S1 2) 1) The input torque must not exceed the maximum permissible transferable torque of the parallel kit. 2) With degree of protection IP65 -H- Note The clamping component EADT is required to adjust the toothed belt pretension with EAMM-U-110. The motor and/or axis shaft can optionally be supported with a counter bearing EAMG. Additional information eamm-u 2017/10 Subject to change Internet: 37

38 Protective bellows kit EADB General technical data Type EADB-V Max. stroke range of cylinder 1) [mm] Type of mounting Push-on Via threaded pin Mounting position Any Resistance to media Dust, chippings, oil, grease, petrol ( Internet: Resistance to media) Ambient temperature 2) [ C] Degree of protection to IEC IP65 Corrosion resistance class CRC 3) 3 1) In combination with the protective bellows kit EADB 2) Note operating range of proximity sensors and cylinder 3) Corrosion resistance class CRC 3 to Festo standard FN High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment. Materials Sectional view Bellows 1 Connection Anodised wrought aluminium alloy 2 Adapter Polyamide 3 Bellows NBR 4 End piece Anodised wrought aluminium alloy O-ring NBR Note on materials Free of copper and PTFE RoHS compliant Weight [g] Type EADB-V Stroke [mm] Product weight Moving mass Internet: Subject to change 2017/10

39 Travel speed v as a function of tubing length l 1 The protective bellows kit is a leakfree system. To prevent unwanted media from being drawn in, the supply and exhaust air for the kit must be ducted via a pressure compensation hole in the connection part 1. The pressure generated in the protective bellows kit by the positioning motion is primarily defined by the travel speed and tubing length. The recommended tubing length based on the travel speed of the drive can be read from the graph. For size 32 For size 40 with QS-G1/4-12, QSH-16-12, PUN-16x2,5 with QS-G1/4-12, PUN-12x2 with QS-G1/4-10, PUN-10x1,5 with QS-G1/4-12, QSH-16-12, PUN-16x2,5 with QS-G1/4-10, PUN-10x1,5 For size 50 For size 63 with QS-G1/4-12, QSH-16-12, PUN-16x2,5 with QS-G1/4-12, PUN-12x2 with QS-G1/4-12, QSH-16-12, PUN-16x2,5 For size 80 with QS-G1/4-12, PUN-12x2 with QS-G1/4-12, QSH-16-12, PUN-16x2,5 2017/10 Subject to change Internet: 39

40 Tubing size and push-in fitting for pressure compensation hole The push-in fittings in the following table must be used for the pressure compensation hole. Silencers can be used as an alternative. This reduces the travel speed slightly. [mm] Tubing O.D. [mm] Push-in fitting Push-in sleeve Plastic tubing Part No. Type Part No. Type Type 32, 40, 50, 63, q QS-G¼ QSH PUN-16x2,5 32, 63, q QS-G¼-12 PUN-12x2 32, q QS-G¼-10 PUN-10x1,5 Dimensions Download CAD data + = plus stroke length 32 Stroke A2 1) D1 D2 EE L1 L2 WH+A2 [mm] Max G¼ Stroke A2 1) D1 D2 EE L1 L2 WH+A2 [mm] Max G¼ ) The dimension corresponds to the E value (piston rod extension) of the cylinder Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 40 Internet: Subject to change 2017/10

41 50 Stroke A2 1) D1 D2 EE L1 L2 WH+A2 [mm] Max G¼ Stroke A2 1) D1 D2 EE L1 L2 WH+A2 [mm] Max G¼ Stroke A2 1) D1 D2 EE L1 L2 WH+A2 [mm] Max G¼ ) The dimension corresponds to the E value (piston rod extension) of the cylinder 2017/10 Subject to change Internet: 41

42 Ordering data Protective bellows kit An extended piston rod (order code E) page 24 is absolutely essential if a protective bellows kit is to be used. The necessary dimensions for E as a function of cylinder size and stroke as well as the corresponding protective bellows kit are indicated in the following table: Order example: Selected electric cylinder: ESBF-BS P- E The dimension for the corresponding E value (see table): 82 mm Complete type code for electric cylinder: ESBF-BS P-82E The corresponding protective bellows kit: EADB-V2-63-S Cylinder data Protective bellows kit Part No. Type [mm] Stroke [mm] Dimension for E [mm] EADB-V2-32-S EADB-V2-32-S EADB-V2-32-S EADB-V2-32-S EADB-V2-32-S EADB-V2-40-S EADB-V2-40-S EADB-V2-40-S EADB-V2-40-S EADB-V2-40-S EADB-V2-50-S EADB-V2-50-S EADB-V2-50-S EADB-V2-50-S EADB-V2-50-S EADB-V2-63-S EADB-V2-63-S EADB-V2-63-S EADB-V2-63-S EADB-V2-63-S EADB-V2-80-S EADB-V2-80-S EADB-V2-80-S EADB-V2-80-S EADB-V2-80-S Internet: Subject to change 2017/10

43 Profile mounting EAHF Materials: Plate: Anodised aluminium Clamping piece: Coated steel RoHS compliant F x Dimensions and ordering data For size AH B1 B2 B4 D1 H1 H2 L1 L2 L3 [mm] For size Transferable axial force F x CRC 1) Weight Part No. Type [mm] [kn] [g] 32, w EAHF-V2-32/40-P 50, w EAHF-V2-50/63-P 80, EAHF-V2-80/100-P 1) Corrosion resistance class CRC 3 to Festo standard FN High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment. Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/10 Subject to change Internet: 43

44 Foot mounting HNC/CRHNC, for parallel motor attachment Materials: HNC: Galvanised steel CRHNC: High-alloy steel Free of copper and PTFE 2 Electric cylinder ESBF 3 Parallel kit EAMM-U 4 Motor EMME-AS/EMMS-AS -H- Note The foot mounting can only be secured at the rear, on the parallel kit. + = plus stroke length Dimensions and ordering data For size AB AH AO AT AU TR US [mm] ±0.2 JS For size XA With parallel kit [mm] EAMM-U-50 EAMM-U-60 EAMM-U-70 EAMM-U-86 EAMM-U-110 EAMM-U For size [mm] Max. load carrying ability [kn] ESBF- CRC 1) Weight [g] ESBF- -R3 Part No. Type CRC 1) Weight [g] Part No q HNC CRHNC q HNC CRHNC q HNC CRHNC q HNC CRHNC q HNC CRHNC HNC CRHNC-100 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. Corrosion resistance class CRC 4 to Festo standard FN Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be supported by special tests ( also FN ) using appropriate media. Type Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 44 Internet: Subject to change 2017/10

45 Flange mounting EAHH Materials: High-alloy stainless steel RoHS compliant Free of copper and PTFE 2 Electric cylinder ESBF Dimensions and ordering data For size E FB MF R TF UF W [mm] H13 js For size [mm] Max. load carrying ability [kn] ESBF- -R3 CRC 1) Weight [g] Part No w EAHH-V2-32-R w EAHH-V2-40-R w EAHH-V2-50-R w EAHH-V2-63-R EAHH-V2-80-R EAHH-V2-100-R1 Type 1) Corrosion resistance class CRC 4 to Festo standard FN Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be supported by special tests ( also FN ) using appropriate media. 2017/10 Subject to change Internet: 45

46 Trunnion flange ZNCF/CRZNG Materials: ZNCF: Stainless steel casting CRZNG: Electropolished stainless steel casting Free of copper and PTFE 2 Electric cylinder ESBF 3 Parallel kit EAMM-U 4 Motor EMME-AS/EMMS-AS + = plus stroke length Dimensions and ordering data For size C2 C3 TD TL TM US [mm] e9 H h h h / / / For size XL With parallel kit [mm] EAMM-U-50 EAMM-U-60 EAMM-U-70 EAMM-U-86 EAMM-U-110 EAMM-U For size [mm] Max. load carrying ability [kn] ESBF- CRC 1) Weight [g] ESBF- -R3 Part No. Type CRC 1) Weight [g] Part No ZNCF CRZNG ZNCF CRZNG ZNCF CRZNG ZNCF CRZNG ZNCF CRZNG ZNCF CRZNG-100 Type 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. Corrosion resistance class CRC 4 to Festo standard FN Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be supported by special tests ( also FN ) using appropriate media. 46 Internet: Subject to change 2017/10

47 Trunnion support LNZG Materials: Trunnion support: Anodised aluminium Plain bearing: Plastic Free of copper and PTFE Dimensions and ordering data For size Max. load carrying ability CR DA FK FN FS H1 HB [mm] [kn] D11 H13 ±0.1 H , , For size KE NH TH UL CRC 1) Weight Part No. Type [mm] ±0.2 [g] LNZG-32 40, LNZG-40/50 63, LNZG-63/ LNZG-100/125 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. 2017/10 Subject to change Internet: 47

48 Trunnion support CRLNZG Materials: High-alloy steel Free of copper and PTFE Dimensions and ordering data For size Max. load carrying ability CR FK FN FS H1 HB [mm] [kn] D11 ±0.1 H / , For size NH TH UL CRC 1) Weight Part No. Type [mm] ±0.2 [g] CRLNZG-32 40/ CRLNZG-40/50 63, CRLNZG-63/ CRLNZG-100/125 1) Corrosion resistance class CRC 4 to Festo standard FN Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be supported by special tests ( also FN ) using appropriate media. 48 Internet: Subject to change 2017/10

49 Swivel flange DAMS Materials: Aluminium RoHS compliant Free of copper and PTFE 2 Electric cylinder ESBF 3 Parallel kit EAMM-U 4 Motor EMME-AS/EMMS-AS + = plus stroke length Dimensions and ordering data For size DB E FB FL TG W Max. [mm] [ ] For size XC With parallel kit [mm] EAMM-U-60 EAMM-U-70 EAMM-U-86 EAMM-U-110 EAMM-U For size Max. load carrying ability CRC 1) Weight Part No. Type [mm] [kn] [g] DAMS-K-V1-40-V-R DAMS-K-V1-50-V-R DAMS-K-V1-63-V-R DAMS-K-V1-80-V-R DAMS-K-V1-100-V-R3 1) Corrosion resistance class CRC 3 to Festo standard FN High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment. -H- Note The swivel flange SNCS or SNCB (max. load carrying ability of 1 kn) can be used for size /10 Subject to change Internet: 49

50 Swivel flange SNC Materials: Die-cast aluminium Free of copper and PTFE RoHS compliant 1 The king pin is protected against rotation with a spring pin 2 Electric cylinder ESBF 3 Parallel kit EAMM-U 4 Motor EMME-AS/EMMS-AS + = plus stroke length Dimensions and ordering data For size CG CP E EK FL L SR TG [mm] H14 H14 H9 ± / / For size XC With parallel kit [mm] EAMM-U-50 EAMM-U-60 EAMM-U-70 EAMM-U-86 EAMM-U-110 EAMM-U For size Max. load carrying ability CRC 1) Weight Part No. Type [mm] [kn] [g] q SNC q SNC q SNC q SNC q SNC SNC-100 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 50 Internet: Subject to change 2017/10

51 Swivel flange SNCS/CRSNCS/SNCS- -R3 Material: SNCS 63 80: Die-cast aluminium SNCS 100: Wrought aluminium alloy CRSNCS 63 80: Stainless steel casting SNCS- -R3 100: Wrought aluminium alloy with protective coating RoHS-compliant 2 Electric cylinder ESBF 3 Parallel kit EAMM-U 4 Motor EMME-AS/EMMS-AS + = plus stroke length Dimensions and ordering data For size CN E EP EX FL LT MS [mm] ESBF- ESBF- -R3 ESBF- ESBF- -R3 ±0.2 ±0.2 ESBF- ESBF- -R / / / / / / ,5 ±0.5 74,5 ± / ,2 ±0.8 92,2 ± / / ±0.5 30±0.5 For size RA +1 TG XC With parallel kit [mm] ESBF- ESBF- -R3 EAMM-U-50 EAMM-U-60 EAMM-U-70 EAMM-U-86 EAMM-U-110 EAMM-U For size Max. load SNCS High corrosion protection carrying ability CRC 1) Weight Part No. Type CRC 1) Weight Part No. Type [mm] [kn] [g] [g] q SNCS CRSNCS q SNCS CRSNCS q SNCS CRSNCS q SNCS CRSNCS q SNCS CRSNCS SNCS SNCS-100-R3 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/10 Subject to change Internet: 51

52 Swivel flange SNCL Materials: Die-cast aluminium Free of copper and PTFE RoHS compliant 2 Electric cylinder ESBF 3 Parallel kit EAMM-U 4 Motor EMME-AS/EMMS-AS + = plus stroke length Dimensions and ordering data For size CD E EW FL L MR TG [mm] H9 0.2/0.6 ± / / For size XC With parallel kit [mm] EAMM-U-50 EAMM-U-60 EAMM-U-70 EAMM-U-86 EAMM-U-110 EAMM-U For size Max. load carrying ability CRC 1) Weight Part No. Type [mm] [kn] [g] q SNCL q SNCL q SNCL q SNCL q SNCL SNCL-100 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 52 Internet: Subject to change 2017/10

53 Swivel flange SNCB/SNCB- -R3 Materials: SNCB: Die-cast aluminium SNCB- -R3: Die-cast aluminium with protective coating, high corrosion protection Free of copper and PTFE RoHS compliant 2 Electric cylinder ESBF 3 Parallel kit EAMM-U 4 Motor EMME-AS/EMMS-AS + = plus stroke length Dimensions and ordering data For size CB E EK FL L MR TG UB [mm] H14 e8 ± H / / For size XC With parallel kit [mm] EAMM-U-50 EAMM-U-60 EAMM-U-70 EAMM-U-86 EAMM-U-110 EAMM-U For size [mm] Max. load carrying ability [kn] ESBF- CRC 1) Weight [g] ESBF- -R3 Part No. Type CRC 1) Weight [g] Part No q SNCB SNCB-32-R q SNCB SNCB-40-R q SNCB SNCB-50-R q SNCB SNCB-63-R q SNCB SNCB-80-R SNCB SNCB-100-R3 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. Corrosion resistance class CRC 3 to Festo standard FN High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment. Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock Type 2017/10 Subject to change Internet: 53

54 Trunnion mounting kit DAMT Materials: Galvanised steel The kit can be mounted at any position along the cylinder profile barrel. The trunnion mounting kit cannot be mounted in the vicinity of the motor when used in combination with the parallel kit EAMM-U. Free of copper and PTFE RoHS compliant 1 Max. tightening torque 2 Electric cylinder ESBF 3 Axial kit EAMM-A + = plus stroke length +½ = plus stroke length Dimensions and ordering data For size B1 C2 C3 TD TL TM UW XG [mm] e For size XJ XV Max. tightening torque Max. load carrying ability CRC 1) Weight Part No. Type [mm] [Nm] [kn] [g] q DAMT-V1-32-A q DAMT-V1-40-A q DAMT-V1-50-A q DAMT-V1-63-A q DAMT-V1-80-A DAMT-V1-100-A 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 54 Internet: Subject to change 2017/10

55 Ordering data Mounting attachments Designation For size Max. load carrying ability [kn] Technical data Internet: clevis foot Part No. Type Designation For size Max. load Part No. Type carrying ability [kn] Clevis foot LNG Clevis foot LSN q33890 LNG LSN q33891 LNG LSN q33892 LNG LSN q33893 LNG LSN q33894 LNG LSN LNG LSN-100 Clevis foot LSNG Clevis foot LSNSG LSNG LSNSG LSNG LSNSG LSNG LSNSG LSNG LSNSG LSNG LSNSG LSNG LSNSG-100 Clevis foot LBG Right-angle clevis foot LQG LBG LQG LBG LQG LBG LQG LBG LQG LBG LQG LBG LQG-100 Ordering data Mounting attachments, corrosion-resistant Designation For size Max. load carrying ability [kn] Technical data Internet: clevis foot Part No. Type Clevis foot CRLNG CRLNG CRLNG CRLNG CRLNG CRLNG CRLNG-100 Ordering data Mounting attachments, high corrosion protection Designation For size Max. load carrying ability [kn] Technical data Internet: clevis foot Part No. Type Clevis foot LBG LBG-32-R LBG-40-R LBG-50-R LBG-63-R LBG-80-R LBG-100-R3 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/10 Subject to change Internet: 55

56 Ordering data Piston-rod attachments Designation For size Max. load carrying ability [kn] Technical data Internet: piston-rod attachment Part No. Type Designation For size Max. load Part No. Type carrying ability [kn] Rod eye SGS Rod clevis SGA q9261 SGS-M10x1, SGA-M10x1, q9262 SGS-M12x1, SGA-M12x1,25 50, 63 4 q9263 SGS-M16x1,5 50, SGA-M16x1,5 80, q9264 SGS-M20x1,5 80, SGA-M20x1,5 Rod clevis SG Self-aligning rod coupler FK q6144 SG-M10x1, q6140 FK-M10x1, q6145 SG-M12x1, q6141 FK-M12x1,25 50, 63 4 q6146 SG-M16x1,5 50, 63 4 q6142 FK-M16x1,5 80, q6147 SG-M20x1,5 80, q6143 FK-M20x1,5 Coupling piece KSZ KSZ-M10x1, KSZ-M12x1,25 50, KSZ-M16x1,5 80, KSZ-M20x1,5 Ordering data Piston-rod attachments, corrosion-resistant Technical data Internet: piston-rod attachment Designation For size Max. load Part No. Type Designation For size Max. load Part No. Type carrying ability [kn] carrying ability [kn] Rod eye CRSGS Rod clevis CRSG CRSGS-M10x1, CRSG-M10x1, CRSGS-M12x1, CRSG-M12x1,25 50, CRSGS-M16x1,5 50, CRSG-M16x1,5 80, CRSGS-M20x1,5 80, CRSG-M20x1,5 Self-aligning rod coupler CRFK CRFK-M10x1, CRFK-M12x1,25 50, CRFK-M16x1, CRFK-M20x1,5 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 56 Internet: Subject to change 2017/10

57 Ordering data Guide units Stroke Part No. Type Stroke Part No. Type [mm] [mm] Technical data Internet: eagf For size 32 For size w EAGF-V2-KF w EAGF-V2-KF w EAGF-V2-KF w EAGF-V2-KF w EAGF-V2-KF w EAGF-V2-KF w EAGF-V2-KF w EAGF-V2-KF EAGF-V2-KF EAGF-V2-KF-40- For size 50 For size w EAGF-V2-KF w EAGF-V2-KF w EAGF-V2-KF w EAGF-V2-KF w EAGF-V2-KF w EAGF-V2-KF w EAGF-V2-KF w EAGF-V2-KF EAGF-V2-KF EAGF-V2-KF-63- For size 80 For size EAGF-V2-KF EAGF-V2-KF EAGF-V2-KF EAGF-V2-KF EAGF-V2-KF EAGF-V2-KF EAGF-V2-KF EAGF-V2-KF EAGF-V2-KF EAGF-V2-KF H- Note The length of the guide unit must be correspondingly longer for cylinders with piston rod extensions. Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/10 Subject to change Internet: 57

58 Sensor mounting The sensor mountings can only be attached within the highlighted area due to the asymmetry of the internal magnets. The proximity sensors may not switch reliably if they are mounted outside of this area. L3 Size L1 L2 L Ordering data Sensor mounting for T-slot For Description Length Part No. Type [mm] Sensor rail For proximity sensor SMT/CRSMT-8 The sensor rail is glued onto the cylinder SAMH-N8-SR SAMH-N8-SR-100 Mounting kit Mounting kit For proximity sensor SMT/CRSMT-8 The overall length corresponds to the length of the sensing range plus an adjustment range of approx. 10 mm for the proximity sensors The kit is glued onto the cylinder CRSMB-8-32/100 32, 40 For proximity sensor SMT/CRSMT SMB-8-FENG-32/40 50, 63 The kit is fastened to the profile by means of two screws SMB-8-FENG-50/63 80, SMB-8-FENG-80/ Internet: Subject to change 2017/10

59 Ordering data Proximity sensor for T-slot, magneto-resistive Type of mounting Switching Electrical connection Cable length Part No. Type output [m] Technical data Internet: smt N/O contact Insertable in the slot from above, flush with the mounting kit, short design PNP Cable, 3-wire 2.5 q SMT-8M-A-PS-24V-E-2,5-OE Plug M8x1, 3-pin 0.3 q SMT-8M-A-PS-24V-E-0,3-M8D Plug M12x1, 3-pin 0.3 q SMT-8M-A-PS-24V-E-0,3-M12 NPN Cable, 3-wire 2.5 q SMT-8M-A-NS-24V-E-2,5-OE Plug M8x1, 3-pin 0.3 q SMT-8M-A-NS-24V-E-0,3-M8D N/C contact Insertable in the slot from above, flush with the mounting kit, short design PNP Cable, 3-wire 7.5 q SMT-8M-A-PO-24V-E-7,5-OE Ordering data Proximity sensor for T-slot, magneto-resistive, corrosion resistant Technical data Internet: crsmt Type of mounting Switching Electrical connection Cable length Part No. Type output [m] N/O contact Insertable in the slot from above, flush with the mounting kit PNP Cable, 3-wire CRSMT-8M-PS-24V-K-5,0-OE Plug connector M12x1, 3-pin CRSMT-8M-PS-24V-K-0,3-M12 Plug connector M8x1, 3-pin CRSMT-8M-PS-24V-K-0,3-M8D Ordering data Connecting cables Technical data Internet: nebu Electrical connection, left Electrical connection, right Cable length Part No. Type [m] Straight socket, M8x1, 3-pin Cable, open end, 3-wire 2.5 q NEBU-M8G3-K-2.5-LE3 5 q NEBU-M8G3-K-5-LE3 Straight socket, M12x1, 5-pin Cable, open end, 3-wire 2.5 q NEBU-M12G5-K-2.5-LE3 5 q NEBU-M12G5-K-5-LE3 Angled socket, M8x1, 3-pin Cable, open end, 3-wire 2.5 q NEBU-M8W3-K-2.5-LE3 5 q NEBU-M8W3-K-5-LE3 Angled socket, M12x1, 5-pin Cable, open end, 3-wire NEBU-M12W5-K-2.5-LE NEBU-M12W5-K-5-LE3 Ordering data Blanking screws, corrosion-resistant For Material CRC 1) Weight [g] Part No. Type PU 2) 32, 40 High-alloy steel DAMD-PS-M6-12-R1 4 50, DAMD-PS-M8-16-R1 80, DAMD-PS-M10-16-R1 1) Corrosion resistance class CRC 3 to Festo standard FN High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment. 2) Packaging unit Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/10 Subject to change Internet: 59

60 Festo North America 1 Festo Canada 2 Montréal 3 Québec City Headquarters Festo Inc Explorer Drive ississauga, O LW , Trans-Canada Pointe-Claire, QC , rue Watt11 Québec, QC Festo United States 5 Appleton 7 etroit Headquarters Festo Corporation 395 Moreland Road orth 9 Tower iew Drive, Suite Greenville, WI 59 auppauge, 11 6 Chicago 8 5 W Algonquin - Suite 30 Arlington eights, IL West Long Lake Road Troy, MI 09 Silicon Valley 935 Southfront Road, Suite F Livermore, CA 9550 Festo Regional Contact Center Canadian Customers Commercial Support: Tel: 1 O FESTO Fax: 1 F FESTO festocanadacafestocom USA Customers Commercial Support: Tel: FESTO Fax: FESTO customerserviceusfestocom Technical Support: Tel:1 O FESTO Fax:1 F FESTO technicalsupportcafestocom Technical Support: Tel:1 O FESTO Fax:100 9 FESTO productsupportusfestocom C Subect to change Internet: