High Speed Fuses Size 5

Transcription

1 Size 5

2 WORLD-WIDE CIRCUIT PROTECTION SOLUTIONS ussmann manufacture a wide range of products for the protection of electrical and electronic circuits... Fuse Links, Fuse Holders, and Fusegear, all readily available from manufacturing sites in the United Kingdom, Denmark, United States, razil and Mexico. ussmann is a division of Cooper Industries Inc., a diversified world-wide manufacturer of electrical products and power equipment. ussmann has grown through both organic growth and acquisition. cquisitions have included the fusegear division of LK-NES, eswick which added UK Domestic fuses as well as IEC and UL Electronic fuses, Hawker Fusegear (formally rush Fusegear Ltd.) which strengthened our range of power fuses and Fusegear. ussmann circuit protection solutions comply with major international standards: S, IEC, DIN and UL, CS... Our manufacturing operations have earned ISO 9000 certification, ensuring the utmost quality across every product.

3

4 Sept. 00 Typower Zilox 690V ac Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 690V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet M M M M8053 5KN/ M K M M M M M Interrupting rating 300k RMS Symmetrical (Estimated) 197 k tested - Suitable microswitches: 170H0069, 170H307 (gold) Single Sided Cooling 690V V Double Sided Cooling Q060E M on bussmann@bussmann.dk

5 Typower Zilox 690V ac Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5KN/85 71,6± 1,5 84,6± 1,5 5 pcs. M1 Max. depth of hole 1,5mm. Min. length of thread 10mm. ø 90,0` 0,5 daptor Max. 178 Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on bussmann@bussmann.dk

6 Sept. 00 Typower Zilox 690V ac Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 690V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet M M M M8034 5SKN/ M K M M M M M Interrupting rating 300k RMS Symmetrical (Estimated) 197 k tested - Suitable microswitches: 170H0069, 170H307 (gold) 690V Single Sided Cooling V Double Sided Cooling Q060bE M on bussmann@bussmann.dk

7 Typower Zilox 690V ac Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5SKN/85 75,3± 1,5 81,8 ± 1,5 0` 1 Max ,0` 0,3 4 pcs. n 14,0` 0,3 9,7` 0,3 c 0,/ ,0` 0,3 160` 1 3, 3, n 90,0` 0,5 Min. 10, 5 pcs. M1 Max. depth of hole 1,5 mm. Min. length of thread 10mm daptor Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on bussmann@bussmann.dk

8 Sept. 00 Typower Zilox 900V ac Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 900V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet M M M807 5KN/ M K M M M M Interrupting rating 300 k RMS Symmetrical (estimated), 197 k tested - Suitable Microswitches: 170H0069, 170H307 (gold) Single Sided Cooling 900V V Double Sided Cooling Q0604E M on bussmann@bussmann.dk

9 Typower Zilox 900V ac Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5KN/100 87,6± 1,8 100,6± 1,8 5 pcs. M1 Max. depth of hole 1,5mm. Min. length of thread 10mm. ø 90,0` 0,5 daptor Max. 178 Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on ussmann@bussmann.dk

10 Sept. 00 Typower Zilox 900V ac Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 900V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet M M M8043 5SKN/ M K M M M M Interrupting rating 300 k RMS Symmetrical (estimated), 197 k tested - Suitable Microswitches: 170H0069, 170H307 (gold) 900V Single Sided Cooling V Double Sided Cooling Q0604bE M on bussmann@bussmann.dk

11 Typower Zilox 900V ac Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5SKN/100 91,3 ± 1,8 97,8± 1,8 0` 1 Max ,0` 0,3 4 pcs. n 14,0` 0,3 9,7` 0,3 c 0,/ ,0` 0,3 160` 1 3, 3, n 90,0` 0,5 Min. 10, 5 pcs. M1 Max. depth of hole 1,5 mm. Min. length of thread 10mm daptor Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on ussmann@bussmann.dk

12 Sept. 00 Typower Zilox 1100V ac Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 1100V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet M M M8014 5KN/ M K M M M Interrupting rating 300 k RMS Symmetrical (estimated), 197 k tested - Suitable Microswitches: 170H0069, 170H307 (gold) Single Sided Cooling 1100V V Double Sided Cooling Q0603E M on bussmann@bussmann.dk

13 Typower Zilox 1100V ac Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5KN/115 10,6±,0 115,6±,0 5 pcs. M1 Max. depth of hole 1,5mm. Min. length of thread 10mm. ø 90,0` 0,5 daptor Max. 178 Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on ussmann@bussmann.dk

14 Sept. 00 Typower Zilox 1100V ac Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 1100V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet M M M8063 5SKN/ M K M M M Interrupting rating 300 k RMS Symmetrical (estimated), 197 k tested - Suitable Microswitches: 170H0069, 170H307 (gold) 1100V Single Sided Cooling V Double Sided Cooling Q0603bE M on bussmann@bussmann.dk

15 Typower Zilox 1100V ac Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5SKN/ ,3±,0 11,8±,0 0` 1 Max ,0` 0,3 4 pcs. n 14,0` 0,3 9,7` 0,3 c 0,/ ,0` 0,3 160` 1 3, 3, n 90,0` 0,5 Min. 10, 5 pcs. M1 Max. depth of hole 1,5 mm. Min. length of thread 10mm daptor Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on ussmann@bussmann.dk

16 Sept. 00 Typower Zilox 1300V ac Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 1300V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet M M M8008 5KN/ M K M M Interrupting rating 300k RMS Symmetrical (Estimated), 197 k tested. - Suitable microswitches: 170H0069, 170H307 (gold) Single Sided Cooling 1300V V Double Sided Cooling Q0601E M on bussmann@bussmann.dk

17 Typower Zilox 1300V ac Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5KN/ ,6±, 130,6±, 5 pcs. M1 Max. depth of hole 1,5mm. Min. length of thread 10mm. ø 90,0` 0,5 daptor Max. 178 Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on ussmann@bussmann.dk

18 Sept. 00 Typower Zilox 1300V ac Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 1300V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet M M M8081 5SKN/ M K M M Interrupting rating 300k RMS Symmetrical (Estimated), 197 k tested. - Suitable microswitches: 170H0069, 170H307 (gold) 1300V Single Sided Cooling V Double Sided Cooling Q0601bE M on bussmann@bussmann.dk

19 Typower Zilox 1300V ac Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5SKN/130 11,3±, 17,8±, 0` 1 Max ,0` 0,3 4 pcs. n 14,0` 0,3 9,7` 0,3 c 0,/ ,0` 0,3 160` 1 3, 3, n 90,0` 0,5 Min. 10, 5 pcs. M1 Max. depth of hole 1,5 mm. Min. length of thread 10mm daptor Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on ussmann@bussmann.dk

20 Sept. 00 Typower Zilox 1500V ac Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 1500V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet M M M801 5KN/ M80 170K M M804 - Interrupting rating 300 RMS Symmetrical (estimated), 197 k tested - Suitable microswitches: 170H0069, 170H307 (gold) Single Sided Cooling 1500V V Double Sided Cooling Q0605E M on bussmann@bussmann.dk

21 Typower Zilox 1500V ac Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5KN/ ,6±, 130,6±, 5 pcs. M1 Max. depth of hole 1,5mm. Min. length of thread 10mm. ø 90,0` 0,5 daptor Max. 178 Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on bussmann@bussmann.dk

22 Sept. 00 Typower Zilox 1500V ac Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 1500V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet M M M8091 5SKN/ M K M M Interrupting rating 300 RMS Symmetrical (estimated), 197 k tested - Suitable microswitches: 170H0069, 170H307 (gold) Single Sided Cooling 1500V V Double Sided Cooling Q0605bE M on bussmann@bussmann.dk

23 Typower Zilox 1500V ac Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5SKN/130 11,3±, 17,8±, 0` 1 Max ,0` 0,3 4 pcs. n 14,0` 0,3 9,7` 0,3 c 0,/ ,0` 0,3 160` 1 3, 3, n 90,0` 0,5 Min. 10, 5 pcs. M1 Max. depth of hole 1,5 mm. Min. length of thread 10mm daptor Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on ussmann@bussmann.dk

24

25 USSMNN OFFICES ROUND THE WORLD EUROPEN HEDQURTERS ussmann Division Cooper (UK) Limited urton-on-the-wolds Leicestershire LE1 5TH, UK Telephone: + 44 (0) Facsimile: + 44 (0) HEDQURTERS Cooper Industries ussmann Division P.O. box St. Louis, Missouri , US Telephone: Facsimile: ussmann in Denmark ussmann International Inc. Literbuen 5 DK-740 Skovlunde Copenhagen Denmark Telephone: Facsimile: ussmann in Mexico rrow-hart S.. de C.V. Poniente 148, No Mexico, D.F. Mexico Telephone: Facsimile: ussmann in ustralia ussmann ustralia lock X 391 Park Road Regents Park NSW 143 ustralia Telephone: Facsimile: ussmann in razil ussmann das razil Ltda Rodovia Santos Dumont, Km 3 Cruz das lmas Itu-Sao Paulo razil Telephone: Facsimile: ussmann in India Cooper ussmann India Private Limited Evr. Street, Sedarapet 3-9 St. Marks Road PONDICHERRY India Telephone: Facsimile: ussmann Circuit Components West Wilson venue Chicago, IL , US Telephone: Facsimile: ussmann sia Pacific ussmann International, Inc., US Singapore ranch 1 Jalan Kilang Timor #06-01 Pacific Tech Centre Singapore Republic of Singapore Telephone: Facsimile: This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design application. ussmann reserves the right to change design or construction of any products. ussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

26 CIRCUIT PROTECTION SOLUTIONS ussmann are one of the world s leading suppliers of fuses and fusible protection systems. Provider of the world s first truly global product line, each product is backed by an efficient world-wide distribution network service and unrivalled technical support. ussmann circuit protection solutions comply with major international standards: S, IEC, DIN and UL. ELECTRONIC LOW VOLTGE FUSE LINKS ussmann high speed fuses use advanced materials and technology. The products are specifically designed for protecting power semiconductors. LV CIRCUIT COMPONENTS LOW VOLTGE FUSEGER S5-00 HIGH SPEED FUSES HIGH VOLTGE PRODUCTS ussmann Division Cooper (UK) Limited urton-on-the-wolds Leicestershire LE1 5TH UK Telephone: 44 (0) Facsimile: 44 (0) Your Representative REPRO & TRYK /S SKIVE Industries company.