CX-20. General Purpose Photoelectric Sensor with Full Basic Performance. SERIES Amplifier Built-in Compact Photoelectric Sensor PHOTOELECTRIC SENSORS

Size: px
Start display at page:

Download "CX-20. General Purpose Photoelectric Sensor with Full Basic Performance. SERIES Amplifier Built-in Compact Photoelectric Sensor PHOTOELECTRIC SENSORS"

Transcription

1 SERIES Amplifier Built-in Compact Photoelectric FX-D/A/M FX-A FX- Fiber s General Purpose Photoelectric with Full Basic Performance FZ- Compact Size Two s Mountable Together Waterproof Just mm in depth, mm shorter than a conventional model. mm mm shorter CX-9 (retroreflective type), CX- and CX- (diffuse reflective type) incorporate an automatic interference prevention function. Hence, two sensors can be mounted close together. CX-, CX-, CX- or CX-IR ( do not have this function. ) Marked Conforming to EMC Directive The sensor can be hosed down because of its IP construction and the non-corrosive stainless steel mounting bracket. EX- CX-RVM/D/NDR CX- EX- mm mm Strong Light Beam CX- (thru-beam type) emits a strong light beam which can pass through sheets of copier paper. The sensor incorporates an infrared LED that is strong against dust or dirt. sheets of copier paper Insusceptible to Extraneous Light: CX- As the spread of the beam from the CX- emitter is narrow, close mounting of sensors is possible. CX- Half the span of CX- Note: However, take care that if it is exposed to water splashes during operation, it may detect a water drop itself. Plug-in Connector Type Is Available Plug-in connector type sensor, which can be easily disconnected for replacement, is available. In case a problem occurs anyone can replace the sensor in a minute. Plug-in connector type CX--J CX- (at setting distance of mm) CX- M connector (IEC conforming) "9mm Mating cable CN-E-C (Cable length: m) CN-E-C (Cable length: m)

2 APPLICATIONS Detecting contents in paper pouch Detecting shiny refrigerators Detecting rubber sheet CX- CX- FX-D/A/M Detecting pet bottles ORDER GUIDE CX-IR CX-9 Transparent objects detectable with CX-IR (Typical examples) Sensing object Sensing object size Glass sheet mm t.mm "mm?mm t.mm Cylindrical glass "mm?mm t.mm Acrylic board mm t.mm Styrol (Floppy case) mm t.mm Food wrapping film mm t!m Cigarette case film mm t!m Vinyl sack mm t!m Pet bottle "mm "mm Glass bin "mm setting : to mm with the RF- reflector at the optimum condition (Note) Each object should pass across the beam at the center between the sensor and the reflector.?: Length of cylindrical glasses t : Thickness of object Note: The optimum condition is defined as the condition in which the sensitivity level is set such that the stability indicator just lights up when the object is absent. Fiber s FX-A FX- FZ- Type Appearance Sensing Model No. Sensing output Emitting element Thru-beam Narrow beam m m CX- CX- Infrared LED NPN output type PNP output type Retroreflective Thru-beam Diffuse reflective Retroreflective With polarizing filters For transparent object Long Short Narrow beam With polarizing filters For transparent object mm. to m (Note ) to,mm (Note ) mm m m. to m (Note ) to,mm (Note ) CX-9 CX-IR CX- CX- CX--PN CX--PN CX-9-PN CX-IR-PN NPN open-collector transistor PNP open-collector transistor Red LED Infrared LED Infrared LED Red LED EX- CX-RVM/D/NDR CX- Diffuse reflective Long Short mm mm CX--PN CX--PN Infrared LED EX- NOTE: Mounting bracket is not supplied with the sensor. Please select from the of optional sensor mounting brackets (five types). Note : The of the retroreflective type sensor is specified for the RF- reflector. Further, the is the possible setting for the reflector. The sensor can detect an object less than.m away (CX-IR: mm). cannot be placed in this Actual m (CX-IR:,mm) of the sensor.m (CX-IR: mm) Setting of the reflector

3 ORDER GUIDE Red LED type for transparent object The red LED type for transparent object, which features easy beam alignment, is available. Model No.: CX-, CX--PN (Sensing : to mm) FX-D/A/M Plug-in connector type (Not available for the self-diagnosis output type) Plug-in connector type is available. When ordering this type, add -J to the model No. (e.g.) Plug-in connector type of CX--PN is CX--PN-J. Plug-in connector type of CX-9-Y is CX-9-J-Y. Mating cable ( Nos. are required for the thru-beam type.) CN-E-C, CN-E-C CN-EL-C, CN-EL-C Type Model No. Description FX-A FX- Fiber s Straight Elbow CN-E-C CN-E-C CN-EL-C CN-EL-C Length: m Length: m Length: m Length: m.mm -core cabtyre cable with connector on one end Cable outer diameter: ".mm Self-diagnosis output type (Available with NPN output type only. However, not available for CX-, CX-, CX-IR, and plug-in connector type.) The self-diagnosis output type is available. When ordering this type, add S to the model No. (e.g.) Self-diagnosis output type of CX- is CX-S. "9mm.mm ".mm.mm mm "9mm ".mm FZ- Package without reflector CX-9, CX- and CX-IR are available without the reflector RF-. When ordering this type, add suffix -Y to the model No. (e.g.) Package without reflector of CX-9 is CX-9-Y. OPTIONS EX- CX-RVM/D/NDR CX- EX- Designation Model No. Description Round slit mask For thru-beam type sensor ( ) only Rect slit mask For thru-beam type sensor ( only ) OS-CX- (Slit size ".mm) OS-CX- (Slit size "mm) OS-CX- (Slit size "mm) OS-CX- (Slit size.mm) OS-CX- (Slit size mm) OS-CX- (Slit size mm) Sensing : mm [CX-] mm [CX-] Min. object: "mm Sensing : mm [CX-, CX-] Min. object: ".mm Sensing : 9mm [CX-] mm [CX-] Min. object: "mm Sensing : mm [CX-, CX-] Min. object: "mm Sensing : m [CX-].m [CX-] Min. object: "mm Sensing : mm [CX-, CX-] Min. object: "mm Sensing : m [CX-].m [CX-] Min. object: "mm Sensing : mm [CX-, CX-] Min. object:.mm Sensing : m [CX-] m [CX-] Min. object: "mm Sensing : m [CX-, CX-] Min. object: mm Sensing : m [CX-] m [CX-] Min. object: "mm Sensing : m [CX-, CX-] Min. object: mm Round slit mask Fitted on the front face of the sensor with onetouch. Round slit mask (Stainless steel) Rect slit mask Fitted on the front face of the sensor with onetouch. Rect slit mask (Stainless steel)

4 OPTIONS Designation Model No. Description For retroreflective type sensor only ( ) mounting bracket Reflective tape (For CX-9 only) RF- RF- MS-RF- MS-RF MS-RF RF- (Note ) RF- Sensing :. to m [CX-9] to mm [CX-IR] Min. object: "mm Sensing :. to.m [CX-9] to mm [CX-IR] Min. object: "mm Protective mounting bracket for RF- It protects the reflector from damage and maintains alignment. For RF- For RF- Ambient temperature: toc Ambient humidity: to % RH Notes: i) Keep the tape free from stress. If it is pressed too much, its capability may deteriorate. Notes: ii) Do not cut the tape. It will deteriorate the performance. Sensing :. to.m [CX-9] Sensing :. to.m [CX-9]. to.m [CX-IR] RF-. mm Reflective tape RF- mm.mm mm mm.mm RF-.mm RF- mm.mm mm mounting bracket MS-RF MS-RF.mm.mm FX-D/A/M Fiber s FX-A FX- mounting bracket (Note ) Universal sensor mounting stand (Note ) checker (Note ) MS-CX- MS-CX- MS-CX- MS-CX- MS-CX- MS-AJ MS-AJ-A MS-AJ-M Foot angled mounting bracket It can also be used for mounting RF-. (The thru-beam type sensor needs two brackets.) Foot biangled mounting bracket Flat mounting saves height. It can also be used for mounting RF-. (The thru-beam type sensor needs two brackets.) Protective mounting bracket It protects the sensor from damage and maintains alignment. (The thru-beam type sensor needs two brackets.) Back biangled mounting bracket Suitable for from bottom of conveyors, etc. (The thru-beam type sensor needs two brackets.) Back angled mounting bracket (The thru-beam type sensor needs two brackets.) Basic assembly Lateral arm assembly Assembly for reflector It is useful for beam alignment of thru-beam type sensors. The optimum receiver position is given by indicators, as well as, an audio signal. Notes: ) RF- cannot be used with CX-IR. Notes: ) The plug-in connector type sensor does not allow use of some sensor mounting brackets because of the protrusion of the connector. Notes: ) Refer to P.l for details of the universal sensor mounting stand. Notes: ) Refer to P.l for details of the sensor checker CHX-SC. mounting bracket MS-CX- MS-CX- MS-CX- Two M (length mm) MS-CX- CHX-SC Two M (length mm) MS-CX- Two M (length mm) MS-RF- Universal sensor mounting stand MS-AJ MS-AJ-A Elevation angle MS-AJ-M Two M (length mm) Two M (length mm) Swivel: rotation Height adjustment: mm approx. Mounting holes for M screw Swivel: rotation With the lateral arm, the sensor can sense from above a production line. rotation angle adjustment checker Two M (length mm) Swivel: rotation Height adjustment: mm approx. Mounting holes for M screw FZ- EX- CX-RVM/D/NDR CX- EX- Elevation angle Height adjustment: mm approx. checker POWER CHX-SC LEVEL Two M (length mm) Two M (length mm) Mounting holes for M screw

5 FX-D/A/M FX-A FX- Fiber s FZ- EX- CX-RVM/D/NDR CX- EX- SPECIFICATIONS Item Sensing Sensing object Hysteresis Repeatability (perpendicular to axis) Supply voltage Sensing output NPN output type PNP output type Utilization category Output operation Short-circuit protection Response time Operation indicator Stability indicator Power indicator Sensitivity adjuster Automatic interference prevention function Pollution degree Protection Ambient temperature Ambient humidity Ambient illuminance EMC Voltage withstandability Insulation resistance Vibration resistance Shock resistance Emitting element Material Cable Cable extension Weight Accessories Model No. Current consumption Environmental resistance Type NPN output type PNP output type Thru-beam Retroreflective Diffuse reflective Narrow beam CX- CX- CX-9 CX-IR CX- CX- CX--PN CX--PN CX-9-PN CX-IR-PN CX--PN CX--PN m m. to m (Note ) to,mm (Note ) mm (Note ) mm (Note ) "mm or more opaque object (Note ) Opaque, translucent or transparent object % or less of operation distance.mm or less.mm or less.mm or less mm or less to V DC% Ripple P-P % or less : ma or less : ma or less ma or less ma or less : ma or less : ma or less ma or less ma or less <NPN output type> NPN open-collector transistor <PNP output type> PNP open-collector transistor Maximum sink current: ma Maximum source current: ma Applied voltage: V DC or less (between output and V) Applied voltage: V DC or less (between output andv) Residual voltage:.v or less (at ma sink current).v or less (at ma sink current) Residual voltage:.v or less (at ma source current).v or less (at ma source current) DC- or DC- Switchable either Light-ON or Dark-ON Incorporated ms or less Red LED (lights up when the output is ON) Green LED (lights up under stable light received condition or stable dark condition) Red LED (lights up when the power is ON) Continuously variable adjuster (Industrial environment) IP (IEC) to C (No dew condensation or icing allowed) (Note ), Storage: to C to % RH, Storage: to % RH Sunlight:,#x at the light-receiving face, Incandescent light:,#x at the light-receiving face Emission: EN-, Immunity: EN-,V AC for one min. between all supply terminals connected together and enclosure MΩ, or more, with V DC megger between all supply terminals connected together and enclosure to Hz frequency,.mm amplitude in X, Y and Z s for two hours each m/s acceleration (G approx.) in X, Y and Z s for three times each Infrared LED (modulated) Red LED (modulated) Infrared LED (modulated) Enclosure: Polycarbonate, Lens: Polycarbonate, Indicator cover: Polycarbonate, Front cover: Polycarbonate (CX-9: Acrylic).mm -core (thru-beam type emitter: -core) oil resistant cabtyre cable, m long Extension up to total m is possible with.mm, or more, cable (thru-beam type: both emitter and receiver). : g approx., : g approx. g approx. Adjusting screwdriver: No. With polarizing filters "mm or more opaque, translucent or specular object (Note ) Incorporated Two units of sensors can be mounted closely. For transparent object "mm or more opaque, translucent or transparent object (Note ) RF- (): No. Adjusting screwdriver: No. Long Incorporated Short Two units of sensors can be mounted ( ) ( ) closely. Adjusting screwdriver: No. Notes: ) The and the object of the retroreflective type sensor are specified for the RF- reflector. Further, the is the possible setting for the reflector. The sensor can detect an object less than.m away (CX-IR: mm). Notes: ) The of the diffuse reflective type sensor is specified for white non-glossy paper (mm) as the object. Notes: ) If slit masks (optional) are fitted, an object of ".mm (using round slit mask) can be detected. Notes: ) In case the sensor is to be used at an ambient temperature ofc, or less, please contact our office. cannot be placed in this Actual m (CX-IR:,mm) of the sensor.m (CX-IR: mm) Setting of the reflector

6 I/O CIRCUIT AND WIRING DIAGRAMS NPN output type I/O circuit diagram circuit ZD Tr D Tr Color code/ Connector pin No. of the plug-in connector type (Brown/)V (Black/) Load Sensing output (Note ) Load ma max. (O/) ZD Self-diagnosis output (Note, ) (Blue/) V ma max. to V DC % Internal circuit Users circuit Notes: ) The emitter of the thru-beam type sensor does not incorporate the output. Notes: ) Only CX-S incorporates the self-diagnosis output. Notes: ) The plug-in connector type sensor does not incorporate the self-diagnosis output. When connecting the mating cable, the white wire is not connected. Symbols... D: Reverse supply polarity protection diode ZD, ZD: Surge absorption zener diode Tr, Tr: NPN output transistor Wiring diagram Connector pin position (Plug-in connector type) Not connected V Sensing output (Note ) V Brown Black O Blue Load Load to V DC % FX-D/A/M Fiber s FX-A FX- PNP output type I/O circuit diagram Color code/ Connector pin No. of the plug-in connector type Wiring diagram FZ- (Brown/) V circuit Tr D ZD ma max. (Black/) Sensing output (Note ) Load (Blue/) V to V DC % Brown Black (Note) Blue Load to V DC % Internal circuit Symbols... D: Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : PNP output transistor SENSING CHARACTERISTICS (TYPICAL) All models Users circuit Notes: ) The emitter of the thru-beam type sensor does not incorporate the output. Notes: ) When connecting the mating cable to the plug-in connector type sensor, the white wire is not connected. Connector pin position (Plug-in connector type) Not connected V Sensing output (Note ) V EX- CX-RVM/D/NDR CX- Correlation between setting distance and excess gain Excess gain CX- CX- Excess gain CX- CX- CX-IR CX-9 EX-

7 FX-D/A/M FX-A FX- Fiber s SENSING CHARACTERISTICS (TYPICAL) CX- Thru-beam type Parallel Angular Parallel with round slit masks (".mm),,,, Parallel with round slit masks ("mm) $ L Operating angle $( ) Parallel with rect slit masks (.mm) Setting distance L (mm) Parallel with rect slit masks (mm) Parallel with round slit masks ("mm) Setting distance L (mm) Parallel with rect slit masks (mm) FZ-,, CX- Thru-beam type EX- CX-RVM/D/NDR CX- EX- Parallel Angular Parallel with round slit masks (".mm) (Down) (Up) Parallel with round slit masks ("mm).. $ L (Down) (Up) Operating angle $( ) Parallel with rect slit masks (.mm).. Setting distance L (mm) Parallel with rect slit masks (mm) Parallel with round slit masks ("mm) Setting distance L (mm) Parallel with rect slit masks (mm) (Down) (Up) (Down) (Up) (Down) (Up)

8 CX-9 Retroreflective type CX-IR Retroreflective type Parallel Angular Parallel Angular SENSING CHARACTERISTICS (TYPICAL) (RF-) CX- Sensing field Setting distance L (mm), mm White nonglossy paper # L (RF-) Diffuse reflective type (RF-) $ L L $ Operating angle $( ) Setting distance L (mm), (RF-) Correlation between object size and As the object size becomes smaller than the standard size (white non-glossy paper mm), the shortens, as shown in the left graph. Sensing L (mm) aamm White nonglossy paper L, ( ) Setting distance L (mm) For plotting the left graph, the sensitivity has been set such that a mm white non-glossy paper is just detectable at a distance of mm. (RF-) (RF-) $ L L $ Operating angle $( ) FX-D/A/M Fiber s FX-A FX- FZ- White non-glossy paper side length a (mm) CX- Diffuse reflective type Sensing field Setting distance L (mm) mm White nonglossy paper # L PRECAUTIONS FOR PROPER USE Correlation between object size and As the object size becomes smaller than the standard size (white non-glossy paper mm), the shortens, as shown in the left graph. Sensing L (mm) aamm White nonglossy paper White non-glossy paper side length a (mm) L ( ) For plotting the left graph, the sensitivity has been set such that a mm white non-glossy paper is just detectable at a distance of mm. Refer to P.l for general precautions. EX- CX-RVM/D/NDR CX- This product is not a safety sensor. Its use is not intended or designed to protect life and prevent body injury or property damage from dangerous parts of machinery. It is a normal object detection sensor. Mounting The tightening torque should be.nm or less. M (length mm) screw with washers MS-CX- (Optional) Operation mode switch D D L L Light-ON mode is obtained when the switch is turned fully counterclockwise. Dark-ON mode is obtained when the switch is turned fully clockwise. Others Do not use during the initial transient time (ms) after the power supply is switched on. When connecting the mating cable to the plug-in connector type sensor, the tightening torque should be.nm or less. EX-

9 FX-D/A/M FX-A FX- Fiber s FZ- EX- CX-RVM/D/NDR CX- PRECAUTIONS FOR PROPER USE Retroreflective type sensor with polarizing filters If a shiny object is covered or wrapped with a transparent film, such as those described below, the retroreflective type sensor with polarizing filters may not be able to detect it. In that case, follow the steps given below. Example of objects Can wrapped by clear film Aluminum sheet covered by plastic film Gold or silver color (glossy) label or wrapping paper Steps Tilt the sensor with respect to the object while fitting. Reduce the sensitivity. Increase the distance between the sensor and the object. Self-diagnosis function (Self-diagnosis output type only) The sensor diagnoses the incident light intensity, and if it is reduced due to dirt or dust, or beam misalignment, an output is generated. Sensing condition Sensing output (operation indicator) (in the Light-ON mode) Stability indicator Self-diagnosis output Insufficient beam intensity DIMENSIONS (Unit: mm) Insufficient beam interruption Stable light received level Sensing output threshold level Stable dark level ON (Lights up) OFF (Lights off) Lights up Lights off ON OFF The self-diagnosis output transistor stays in the OFF state during stable. When the output changes, if the incident light intensity does not reach the stable light received level or the stable dark level, the selfdiagnosis output becomes ON. Further, the self-diagnosis output changes state when the output changes from Light to Dark state. (It is not affected by the operation mode switch.) In case of insufficient beam interruption, there will be a time lag before the self-diagnosis output turns ON. Refer to P.l for general precautions. Retroreflective type sensor for transparent objects Optimum is possible when the position of the transparent object is set at the center of the sensor and the reflector. If the position is set near the sensor or the reflector, the may be unstable. In this case, set the position at the center of the sensor and the reflector. Transparent object When the sensor detects an uneven plastic receptacle or glass bin, the received light intensity may differ with the position or. Adjust the sensitivity after confirming the stable condition by turning the object, etc. If the object is a transparent cylinder, feed it in a position as shown in Figure A. The sensor may fail to detect an object fed in a position as shown in Figure B. Fig. A CX- CX--J Operation indicator (Red) (Note ) -M. thru-hole threads. Operation mode switch (Note ) Stability indicator (Green) (Note ) Sensitivity adjuster (Note ) Operation indicator (Red) (Note ) Stability indicator (Green) (Note ). Fig. B Operation mode switch (Note ) Sensitivity adjuster (Note ) EX- Center of. Center of... ". cable m long " -M. thru-hole threads M connector Notes: ) Not incorporated on the emitter of the thru-beam type sensor. Notes: ) It is the power indicator (red) on the emitter of the thru-beam type sensor. Notes: ) Not incorporated on the emitter of the thru-beam type sensor. Notes: ) It is the power indicator (red) on the emitter of the thru-beam type sensor.

10 DIMENSIONS (Unit: mm) RF- (Accessory for the retroreflective type sensor) RF- (Optional) () FX-D/A/M Material: Acrylic () ABS (Base) () -". mounting holes.. Material: Acrylic () ABS (Base) -". mounting holes.. Fiber s FX-A FX- RF- (Optional) RF- Reflective tape (Optional) FZ-. ().. M nut mounting holes (for mounting at the back) Base () Effective reflecting surface Adhesive tape Material: Acrylic () ABS (Base) Two M (length mm) and two nuts RF-. -". thru-holes (for mounting at the side) -". holes deep (for mounting at the back) -M nut mounting holes (for mounting at the side) Reflective tape (Optional) (). Material: Acrylic EX- CX-RVM/D/NDR CX- () EX- Effective reflecting surface Adhesive tape Material: Acrylic 9

11 SENSOR SENSOR SENSOR SENSOR DIMENSIONS (Unit: mm) MS-CX- mounting bracket (Optional) FX-D/A/M FX-A FX- Fiber s t.. Material: Stainless steel (SUS) Two M (length mm) screws with washers. R.. R. -". holes (for RF-) Mounting drawing with CX- 9. Center of. R.... t. FZ- MS-CX- mounting bracket (Optional). Mounting drawing with CX-. -". holes.. (.) Center of EX- CX-RVM/D/NDR CX- t MS-CX- Material: Stainless steel (SUS) Two M (length mm) screws with washers. R.... mounting bracket (Optional) " " Mounting drawing with CX- t " "9.. 9 R... EX " R R9. Center of t. Material: Stainless steel (SUS) Two M (length mm) screws with washers t.

12 DIMENSIONS (Unit: mm) MS-CX- mounting bracket (Optional) t R9 R Mounting drawing with CX- t. Center of FX-D/A/M R.9.9 Material: Stainless steel (SUS) Two M (length mm) screws with washers Fiber s FX-A FX- MS-CX- t. mounting bracket (Optional) Mounting drawing with CX-. FZ-... R R Material: Stainless steel (SUS) Two M (length mm) screws with washers MS-RF-.. mounting bracket for RF- (Optional)... Center of. 9.. t.. EX- CX-RVM/D/NDR CX- " " Material: Stainless steel (SUS) Two M (length mm) screws with washers.. EX- " R. t...

13 FX-D/A/M DIMENSIONS (Unit: mm) MS-RF mounting bracket for RF- (Optional) FX-A FX- Fiber s -M. thru-hole threads Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated) Two M (length mm) t.. ().. () t. FZ- MS-RF mounting bracket for RF- (Optional).. () EX- CX-RVM/D/NDR CX- () () -M. thru-hole threads Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated) Two M (length mm) t. () 9. () t EX-

14 DIMENSIONS (Unit: mm) MS-AJ Basic assembly (Optional) MS-AJ-M Assembly for reflector (Optional). Cable guide (POM) ()(Note) () (.). -". mounting t holes -.. oblong holes -" mounting holes Attachment (Nylon ) mounting bracket [Stainless steel (SUS)] " pipe [Stainless steel (SUS)] Base (Nylon ) -" mounting holes.. M hexagonsocket-head bolt Note: The dimensions in the brackets indicate the adjustable of the movable part. with series (Mounting part only). -M (length mm) screws with washers t Center of with RF- () (Mounting part only)... t. -M (length mm) screws with washers Two M (length mm), two M (length mm), two M (length mm), one auxiliary mounting plate for EQ- series, and one auxiliary mounting plate for EX- series.... Cable guide (POM) (.)(Note) () ( ) MS-AJ-A Attachment (Nylon ) M hexagonsocket-head bolt t " pipe [Stainless steel (SUS)] Base (Nylon ) -" mounting holes Note: The dimensions in the brackets indicate the adjustable of the movable part. with RF- () (Mounting part only). -M (length mm)... with RF- () (Mounting part only). -M (length mm). ()... Cable guide (POM) () (Note ) M hexagon-sockethead bolt. t. t... M hexagon-sockethead bolt. Lateral arm assembly (Optional). ()(Note ) () " pipe [Stainless steel (SUS)] mounting bracket [Stainless steel (SUS)] (Note ) -". mounting holes Arm joint (Nylon ) -.. " pipe oblong holes [Stainless steel (SUS)] Two M (length mm) screws with washers, and two M (length mm) screws with washers (.) FX-D/A/M Fiber s FX-A FX- FZ- EX- CX-RVM/D/NDR CX- (.) EX- -" mounting holes (.) Base (Note ) (Nylon ) Two M (length mm), two M (length mm), two M (length mm), one auxiliary mounting plate for EQ- series and one auxiliary mounting plate for EX- series Notes: ) The dimensions in the brackets indicate the adjustable of the movable part. Notes: ) Refer to MS-AJ (basic assembly) for the assembly diagram with the base, sensor mounting bracket, sensor or reflector.

Not affected by drops, bubbles or froth

Not affected by drops, bubbles or froth PARTICULAR USE SENSORS SERIES Sensor Detects water...reliably! Strong penetration power Not affected by drops, bubbles or froth Conforming to EMC Directive UL Recognition (Excluding m cable length type)

More information

Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in. panasonic.net/id/pidsx/global

Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in. panasonic.net/id/pidsx/global 3 Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.549~ guide... P.3~ General precautions... P.55~ PHOTO PHOTO MEASURE panasonic.net/id/pidsx/global

More information

GH-5S. 5.6 times approx. Tightening torque 0.78N m or less. Disconnection Alarm Indicator

GH-5S. 5.6 times approx. Tightening torque 0.78N m or less. Disconnection Alarm Indicator GA- SERIES Amplifier-separated Micro-size Inductive Proximity Sensor GH SERIES -N -U Slim & Small The amplifier is extremely slim, just mm thick. This results in a compact size even if several amplifiers

More information

Compact Inductive Proximity Sensor. onlinecomponents.com. Various Applications

Compact Inductive Proximity Sensor. onlinecomponents.com. Various Applications INUCTIVE SERIES Compact Inductive Proximity -N -U G-8H/8H G-N G-8U G-6 Miniature -S is an amplifier built-in inductive proximity sensor having a diameter of just ".8mm. -S ".8mm Various Applications The

More information

GL-6 SERIES. Miniature Inductive Proximity Sensor. High Performance in Surprisingly Small Body. Marked. Extremely Small.

GL-6 SERIES. Miniature Inductive Proximity Sensor. High Performance in Surprisingly Small Body. Marked. Extremely Small. G- SERIES Miniature Inductive Proximity Sensor High Performance in Surprisingly Small Body Marked Conforming to EMC Directive Extremely Small Mountable in a tight space as the sensor is just 19mm in volume.

More information

Indicators reveal the sort of an abnormal condition. Emitter Emitting Controller Power indicator

Indicators reveal the sort of an abnormal condition. Emitter Emitting Controller Power indicator AREA SENSOR SERIES mm Beam Pitch NA1-5 NA2 SF1-F NA40 SF1-N SF1-A Slim Body Fail-safe esign For General Use Supreme Fail-safe esign The system always check there is no internal circuit, no cable breakage,

More information

Cylindrical Sensors CY-100 SERIES panasonic-electric-works.net/sunx. Cylindrical Inductive Proximity Sensor GX-M SERIES.

Cylindrical Sensors CY-100 SERIES panasonic-electric-works.net/sunx. Cylindrical Inductive Proximity Sensor GX-M SERIES. Cylindrical Sensors Photoelectric Sensor CY-100 SERIES Inductive Proximity Sensor GX-M SERIES Listing (2 m cable length type only) Cylindrical Inductive Proximity Sensor GX-M SERIES Cylindrical Photoelectric

More information

GXL SERIES. Micro-size Inductive Proximity Sensor. High Performance in Micro-size Design. Marked. Versatile Mounting. Wide Model Variety

GXL SERIES. Micro-size Inductive Proximity Sensor. High Performance in Micro-size Design. Marked. Versatile Mounting. Wide Model Variety GX SERIES AUDIN Composants & systèmes d'automatisme avenue de la malle - 17 St Brice Courcelles - France Tel. +()61 Fax +()6 http://www.audin.fr e-mail info@audin.fr Micro-size Inductive Proximity High

More information

GXL SERIES. Micro-size Inductive Proximity Sensor. High Performance in Micro-size Design. Marked. Wide Model Variety. Versatile Mounting

GXL SERIES. Micro-size Inductive Proximity Sensor. High Performance in Micro-size Design. Marked. Wide Model Variety. Versatile Mounting GX SERIES Micro-size Inductive Proximity High Performance in Micro-size Design Marked Conforming to EMC Directive Wide Model Variety Models ranging from extremely compact to long range are available to

More information

Compact Size: "5.4mm. GX-5SU(B) is just 5.4mm in diameter, the smallest in existing DC two-wire sensors. It saves you space.

Compact Size: 5.4mm. GX-5SU(B) is just 5.4mm in diameter, the smallest in existing DC two-wire sensors. It saves you space. INDUCTIVE SERIES DC -wire Cylindrical Inductive Proximity G-8H/8H G-N G-8U G-6 Robust in Tightening The tightening torque has been improved to approx. four times greater than that of conventional models

More information

GX-5SU(B) is just 5.4mm in diameter, the smallest in existing DC two-wire sensors. It saves you space. GX-12ML(B) Conventional model

GX-5SU(B) is just 5.4mm in diameter, the smallest in existing DC two-wire sensors. It saves you space. GX-12ML(B) Conventional model SERIES DC -wire Cylindrical Inductive Proximity High Performance & Ease of Use Marked Conforming to EMC Directive Robust in Tightening The tightening torque has been improved to approx. four times greater

More information

GXL SERIES. High performance in micro-size design. Micro-size Inductive Proximity Sensor PROXIMITY SENSORS INDUCTIVE. Wide model variety

GXL SERIES. High performance in micro-size design. Micro-size Inductive Proximity Sensor PROXIMITY SENSORS INDUCTIVE. Wide model variety SERIES Micro-size Inductive Proximity -wire available PNP output Oil resistant Flexible cable Different freq. available available available Amplifier Built-in High performance in micro-size design GA-/GH

More information

Various applications. Robust housing. The GX-4S uses a robust stainless steel housing. The tightening torque can be 0.58 N m or less.

Various applications. Robust housing. The GX-4S uses a robust stainless steel housing. The tightening torque can be 0.58 N m or less. INUCTIVE SERIES Compact Inductive Proximity Sensor Flexible cable Metal embedding type available possible Amplifier Built-in High functionality together with robust housing and flexible cable GA-/GH -N

More information

Simple Pressure Level Setting. The threshold level is able to adjust simply. Just set the pointer suitable for the displayed pressure level.

Simple Pressure Level Setting. The threshold level is able to adjust simply. Just set the pointer suitable for the displayed pressure level. SERIES LED Bar Display Mechanical Switch is Out of Date Choose the Contemporary Pressure Sensor with LED Bar Display Marked Conforming to EMC directive Bright LED Bar Display Easy to read the pressure

More information

PX-2 SERIES. onlinecomponents.com. Compact size sensor realizes wide sensing area & long sensing range. Long Range & Wide Area Photoelectric Sensor

PX-2 SERIES. onlinecomponents.com. Compact size sensor realizes wide sensing area & long sensing range. Long Range & Wide Area Photoelectric Sensor EQ- VF NX PM PM MS-J RT- CY POTOEECTRIC SENSORS SERIES ong Range & Wide rea Photoelectric Sensor Ideal area with very little null zone The advanced optical system of the series reduces the null zones in

More information

High-speed detection even a little liquid leak

High-speed detection even a little liquid leak 737 Leak Sensor Related Information Amplifier Built-in EX-F70 SERIES SERIES Sensor selection guide...p.11~ / P.77~ General terms and conditions...p.1 General precautions...p.986~ PHOTO PHOTO Conforming

More information

Compact Size: "5.4mm. GX-5SU(B) is just 5.4mm in diameter, the smallest in existing DC two-wire sensors. It saves you space.

Compact Size: 5.4mm. GX-5SU(B) is just 5.4mm in diameter, the smallest in existing DC two-wire sensors. It saves you space. SERIES DC -wire Cylindrical Inductive Proximity High Performance & Ease of Use Marked Conforming to EMC Directive Robust in Tightening The tightening torque has been improved to approx. four times greater

More information

GX-5SU(B) is just 5.4 mm 0.213in in diameter, the smallest in existing DC two-wire sensors. It saves you space.

GX-5SU(B) is just 5.4 mm 0.213in in diameter, the smallest in existing DC two-wire sensors. It saves you space. DC 2-wire Cylindrical Inductive Proximity SERIES High performance & ease of use Amplifier Built-in Robust in tightening The tightening torque has been improved to approx. four times greater than that of

More information

Rectangular-shaped Inductive Proximity Sensor.

Rectangular-shaped Inductive Proximity Sensor. 69 PHOTO PHOTO Rectangular-shaped Inductive Proximity Sensor -F/H SERIES Related Information Amplifi er General terms and conditions... P.1 Sensor selection guide...p.11~ / P.67~ Glossary of terms... P.19

More information

Micro-differential Pressure High-precision Digital Pressure Sensor For Gas DP-M SERIES

Micro-differential Pressure High-precision Digital Pressure Sensor For Gas DP-M SERIES MODE 729 Micro-differential Pressure High-precision Digital Pressure Sensor For Gas SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1563~ guide... P.699~ General precautions...

More information

EX-F70 SERIES EX-F60 SERIES

EX-F70 SERIES EX-F60 SERIES 85 Leak Sensor Related Information Amplifier Built-in EX-F70 SERIES SERIES General terms and conditions... F-17 General precautions... P.105 Sensor selection guide... P.81~ Korea s S-mark... P.110 PHOTO

More information

Micro-differential Pressure High-precision Digital Pressure Sensor For Gas DP-M SERIES

Micro-differential Pressure High-precision Digital Pressure Sensor For Gas DP-M SERIES MODE 751 Micro-differential Pressure High-precision Digital Pressure Sensor For Gas SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.1469 ~ Sensor selection guide...

More information

Head-separated Digital Pressure Sensor DP5 SERIES DPH SERIES

Head-separated Digital Pressure Sensor DP5 SERIES DPH SERIES 76 ORDER GUIDE DP / configuration diagram Intermediate cable s Type Vacuum pressure Positive pressure Compound pressure Appearance An intermediate cable is required to connect the controller and the sensor

More information

SERIES LED Display Digital Pressure Sensor. Clearly Visible LED Display with 3 1 /2 Digits

SERIES LED Display Digital Pressure Sensor. Clearly Visible LED Display with 3 1 /2 Digits SERIES LED Display Digital Pressure Sensor PE DP-M DP-Y DP3 High Accuracy High Resolution High Speed It achieves a 2.5ms, or less, response time at a high resolution of 1/1,000. It enables highly accurate

More information

SERIES LED Display Digital Pressure Sensor. Clearly Visible LED Display with 3 1 /2 Digits

SERIES LED Display Digital Pressure Sensor. Clearly Visible LED Display with 3 1 /2 Digits SERIES LED Display Digital Pressure Sensor Complete Functionality from a Wide Model Line-up Marked Conforming to EMC Directive High Accuracy High Resolution High Speed It achieves a 2.5ms, or less, response

More information

Features. 2-wire type available. Max. operation distance: 1.5 mm 0.06 in (Stable sensing range 0 to 1.2 mm 0.05 in)

Features. 2-wire type available. Max. operation distance: 1.5 mm 0.06 in (Stable sensing range 0 to 1.2 mm 0.05 in) 817 Cylindrical Inductive Proximity Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms...p.1576~ guide... P.781~ General precautions... P.1579~ PHOTO PHOTO panasonic.net/id/pidsx/global

More information

SA1W: Water Detection Sensors SA1W-FN1 SA1W-FN2 SA1W-FP1 SA1W-FP2

SA1W: Water Detection Sensors SA1W-FN1 SA1W-FN2 SA1W-FP1 SA1W-FP2 The SA1W is the fastest, most reliable liquid detection sensor on the market. Using a laser beam tuned to the resonant frequency of an H 2 O molecule, the SA1W is able to detect any liquid containing water

More information

SA1W: Water Detection Sensors

SA1W: Water Detection Sensors Courtesy of Steven Engineering, Inc. 230 Ryan Way, South San Francisco, CA, 94080-6370 ain Office: (650) 588-9200 Outside Local Area: (800) 258-9200 www.steveneng.com The SA1W is the fastest, most reliable

More information

2 Window comparator mode. Hysteresis Hysteresis

2 Window comparator mode. Hysteresis Hysteresis SERIES High-performance Digital Pressure Sensor Digital Automatic sensitivity setting With analog output Complete functionality! Selection from a wide lineup DP3 * UL 61010C-1 compatible, Passed the UL

More information

Digital Pressure Sensor with Auto-reference Function. Example of air-leak test. Threshold level. Reference pressure. Reference pressure

Digital Pressure Sensor with Auto-reference Function. Example of air-leak test. Threshold level. Reference pressure. Reference pressure SERIES Digital ure Sensor with Auto-reference Function Digital Auto reference High accuracy sensing at all times with autoreference function * UL 61010C-1 compatible, Passed the UL 991 Environment Test

More information

Construction diagram Semiconductor transducer Silicone oil. Stainless steel SUS316 pressure port Hastelloy C diaphragm.

Construction diagram Semiconductor transducer Silicone oil. Stainless steel SUS316 pressure port Hastelloy C diaphragm. SERIES LED Display Anti-corrosive Digital ure Sensor DP3 ure Measurement of Corrosive Gases and Liquids Possible! Marked Conforming to EMC Directive Superior Anti-corrosive Hastelloy C Diaphragm and Stainless

More information

Cylindrical Inductive Proximity Sensor GX-M SERIES

Cylindrical Inductive Proximity Sensor GX-M SERIES Cylindrical Inductive Proximity Sensor GX-M SERIES Listing (2 m cable length type only) Features Wide product range Types: DC 3-wire shielded type DC 3-wire non-shielded type DC 2-wire standard type DC

More information

TL-W. Standard Flat Sensors in Many Different Variations. Flat Inductive Proximity Sensor. Ordering Information

TL-W. Standard Flat Sensors in Many Different Variations. Flat Inductive Proximity Sensor. Ordering Information Flat Inductive Standard Flat s in Many Different Variations Only 6 mm thick yet provides a sensing distance of mm (MC1). Aluminum die-cast models also available. Be sure to read Safety Precautions on page

More information

DP5/DPH. Head Separated Digital Pressure Sensor. 1/1000 Second High-Speed Response. The advantage of the fastest response in the industry SERIES

DP5/DPH. Head Separated Digital Pressure Sensor. 1/1000 Second High-Speed Response. The advantage of the fastest response in the industry SERIES Head Separated Digital Pressure Sensor SERIES /000 Second High-Speed Response Conforming to EMC Directive UL Recognition /,000 sec. The advantage of the fastest response in the industry 55 High speed in

More information

sensors SA1C-F High-speed Fiber Optic: SA1C-F

sensors SA1C-F High-speed Fiber Optic: SA1C-F High-speed Fiber Optic: Key features: Ideal for remote sensing applications Featuring quick-connect cable and easy-insert fiber optic units for simple installation Through-beam and reflected-light sensing

More information

SA1A and SA1B: High-Speed, Slim Style Photoelectric Sensors

SA1A and SA1B: High-Speed, Slim Style Photoelectric Sensors SA1A and SA1B: High-Speed, Slim Style Photoelectric Key features of the SA1A and SA1B include: Ideal for installations with broad or narrow clearances Available with through-beam between the projector

More information

Super fast 1 ms Convenient intermediate cable with connector A total of 10 head variations

Super fast 1 ms Convenient intermediate cable with connector A total of 10 head variations SERIES Digital Sensor Digital Automatic sensitivity setting Auto reference With analog output /, sec. The fastest response in the industry DP DP Conforming to EMC Directive UL Recognition Super fast ms

More information

Automatic Sensitivity Compensation

Automatic Sensitivity Compensation AREA SENSOR SERIES 0mm Beam Pitch Slim Body Fail-safe Design For General Use Outputs World-wide Coverage of Safety Requirements The series are UL listed according to UL 491 along with conforming to OSHA

More information

Description General-purpose models Timer-function models Output NPN PNP NPN PNP Part number E3X-NH11 E3X-NH41 E3X-NH21 E3X-NH51 Appearance

Description General-purpose models Timer-function models Output NPN PNP NPN PNP Part number E3X-NH11 E3X-NH41 E3X-NH21 E3X-NH51 Appearance R High-Precision Fiber-optic Amplifier TheEmploysa16-Bit Processor as An Industry First H An Automatic Sensitivity Adjustment feature allows stable detection of objects in frequently changing environments

More information

EX-F70 SERIES EX-F60 SERIES

EX-F70 SERIES EX-F60 SERIES 877 Leak Sensor Amplifier Builtin EXF70 SERIES SERIES Related Information General terms and conditions... F General precautions... P.155~ guide... P.865~ Korea s Smark... P.160 PHOTO PHOTO MEASURE panasonic.net/id/pidsx/global

More information

A New Global Standard

A New Global Standard PRESSURE SENSOR DIGITAL PRESSURE SENSOR DP- SERIES Conforming to EMC Directive Recognition Certification [DP-(A)/(A) only] A New Global Standard Dual display for the digital pressure sensors of the future

More information

19mm Thickness. Phone: Fax: Web:

19mm Thickness. Phone: Fax: Web: 19mm Thickness Minimum Space Required Type2 Appropriate Safety Safety level required by global standards 'Safety' has joined 'Environment' as one of the keywords of the new century. The importance of machine

More information

E2K-L. Liquid Level Sensor. Applications. Ordering Information

E2K-L. Liquid Level Sensor. Applications. Ordering Information Liquid Level Sensor Installation on pipes. Sensing by means electrostatic capacity and is not influenced by the color of the pipe or liquid. Available in 8 to mm dia. and to mm dia. models to enable sensing

More information

High-frequency AC Method. panasonic-electric-works.net/sunx

High-frequency AC Method. panasonic-electric-works.net/sunx 1091 PHOTO PHOTO Thin Type Ionizer High-frequency AC Method General terms and conditions... F-17 Related Information Glossary of terms... P.1401 guide... P.1075~ General precautions... P.1405 Conforming

More information

IP69K: Highly water resistant

IP69K: Highly water resistant Stainless steel housing type Series IP69K: Highly water resistant Tough structure for food processing line needs washing with high temperature and high pressure water. Achieves long sensing distance. For

More information

FX born from technological innovation

FX born from technological innovation AUDIN - 8, avenue de la malle - 70 Saint Brice Courcelles - Tel : 0.26.04..2 - Fax : 0.26.04.28. - Web : http: www.audin.fr - Email : info@audin.fr SERIES - born from technological innovation sensor have

More information

High Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67G environment resistance

High Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67G environment resistance 11 High Accuracy ddy Current Type Sensor SRIS Related Information General terms and conditions... F-7 Glossary of terms... P.1493 Sensor selection guide... P.1055~ General precautions... P.1501 PHOTO PHOTO

More information

Cylindrical photoelectric sensors in M18 plastic or brass housings. Performance and portfolio variety. Metal *1 90 Optics AC power supply *2

Cylindrical photoelectric sensors in M18 plastic or brass housings. Performance and portfolio variety. Metal *1 90 Optics AC power supply *2 Cylindrical photoelectric sensors in M8 plastic or brass housings Complete sensor portfolio in plastic and metal housing IP67, IP69K for highest water resistance High immunity against electro-magnetic

More information

IP69K: Highly water resistant

IP69K: Highly water resistant Stainless steel housing BGS type BGS-ZM Series IP9K: Highly water resistant Tough structure for food processing line needs washing with high temperature and high pressure water. turn sensitivity adjustment

More information

E2EZ-X2D1-N E2EZ-X2D2-N

E2EZ-X2D1-N E2EZ-X2D2-N Chip-immune Inductive s Detects Objects without Being Influenced by Aluminum or Iron Chips Series now includes M s. s also available. CE Marking for DC -Wire and DC -Wire s. Be sure to read Safety Precautions

More information

Photoelectric Sensors 55 Series

Photoelectric Sensors 55 Series PG.05E.07.T.E August 007 High Optical Performance and a Built-In Swivel Bracket for Easy and Precise Alignment Contents Overview...................... Model Selection, Sensors........ Model Selection,

More information

Model Pressure range ON/OFF output Linear output

Model Pressure range ON/OFF output Linear output Digital Sensor Sensor with Easy-to-Read LED Display status can be checked at a glance from the red digital pressure value and analog bar displays. Measurement pressure is averaged by the chattering prevention

More information

Inductive Proximity Sensor

Inductive Proximity Sensor Inductive Proximity Sensor Subminiature Sensor Ideal for Narrow Mounting Space Grooved TL-G3D is ideal for high-speed pulse generator and high-speed revolution control. TL-Q2 and TL-Q5 save mounting space

More information

2.5 mm. (0.10 in) E2S -Q25 E2S -Q26. Output configuration. 2.5 mm. End face E2S -W15 E2S -W16 End face PNP

2.5 mm. (0.10 in) E2S -Q25 E2S -Q26. Output configuration. 2.5 mm. End face E2S -W15 E2S -W16 End face PNP Subminiature Rectangular Inductive Prox World s Smallest Square Sensor with Built-in Amplifier H. x. mm type allows smaller, space-saving machines and devices H High response frequency ( khz) for fast

More information

Q45BB6LL Series Laser Diode Retroreflective Sensors

Q45BB6LL Series Laser Diode Retroreflective Sensors Q45BB6LL eries Laser Diode Retroreflective ensors Very-Long-Range Retroreflective ensors for 10 to 30V dc Features LITD High power and small effective beam for retroreflective sensing applications Class

More information

Supply Voltage 10-30V DC. (10ms on/off) 10-30V DC. (1ms on/off) 10-30V DC. (10ms on/off) 10-30V DC. (1ms on/off) 10-30V DC. (10ms on/off) 10-30V DC

Supply Voltage 10-30V DC. (10ms on/off) 10-30V DC. (1ms on/off) 10-30V DC. (10ms on/off) 10-30V DC. (1ms on/off) 10-30V DC. (10ms on/off) 10-30V DC Opposed Mode Connection Supply Voltage Output Mode Part Number m Cable EP-T8D-EY9CL EP-T8D-LY9C4U EP-T8D-DY9C4U Light Source : infrared 88nm 9m Cable EP-T8D-EY9CL-HS EP-T8D-LY9C4U-HS EP-T8D-DY9C4U-HS EP-T8D-EY9CL9

More information

ISF: Heavy Duty Photoelectric Sensors

ISF: Heavy Duty Photoelectric Sensors ISF: Heavy Duty Photoelectric Key features of the ISF include: Rugged, waterproof photoelectric sensors with universal voltages 24 240V AC/24 240V DC or 10 30V DC; both available with time delay Featuring

More information

Digital display Pressure range ON/OFF output Linear output Model

Digital display Pressure range ON/OFF output Linear output Model Slim Digital Pressure Sensor E8CB/ CSM_E8CB DS_E 1 with Built-in Microcomputer and Digital Display Withstands a of 9 kpa and highly reliable. Incorporates a two-turn adjuster ensuring easy setting. Be

More information

Model Pressure range ON/OFF output Linear output

Model Pressure range ON/OFF output Linear output Authorised Distributors:- ASH & ALAIN INDIA PV LD S-1, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-112(India) el : 11-43797575 Fax : 11-43797574 E-mail : sales@ashalain.com Digital Sensor Sensor

More information

E3ZM-C. Photoelectric Sensor for the Automotive and Machine Tool Industries. Features

E3ZM-C. Photoelectric Sensor for the Automotive and Machine Tool Industries. Features Authorised Distributors:Intech Systems Chennai Pvt. Ltd, Chennai-6 Ph: +9 8888 Fax: 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com Oil-resistant, Robust, Compact Photoelectric Sensor

More information

MULTISTAGE MICRO EJECTORS CONTENTS ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS. Caution

MULTISTAGE MICRO EJECTORS CONTENTS ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS. Caution ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS MULTISTAGE MICRO EJECTORS CONTENTS MED07-E, MED10-E Series Specifications 715 Order Codes 716 Operation Principle

More information

Related products. Can be used in vacuums and high temperatures up to 300 C

Related products. Can be used in vacuums and high temperatures up to 300 C Fiber units NF series 91 18 Related products Through-beam type/diffuse type/ reflective type Fiber amplifier D3RF P.0 Fiber amplifier BRF P.130 Can be used in vacuums and high temperatures up to 300 C

More information

MULTISTAGE MICRO EJECTORS

MULTISTAGE MICRO EJECTORS MULTISTAGE MICRO EJECTORS MED07-E, MED10-E Specifications Basic model Item Media Operating pressure range MPa [psi.] Proof pressure MPa [psi.] Operating temperature range (atmosphere and media) C [ F]

More information

* E8MS-N1 is only 1-channel pressure sensor controller. E80-C2 can be used. For more details, please refer to E80 catalogue.

* E8MS-N1 is only 1-channel pressure sensor controller. E80-C2 can be used. For more details, please refer to E80 catalogue. Authorised Distributors:- ASH & ALAIN INDIA PVT LTD S-, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-(India) Tel : -7977 Fax : -7977 E-mail : sales@ashalain.com Sensor Four-Input-Channel Sensor

More information

Inductive Proximity Sensor

Inductive Proximity Sensor Inductive Proximity Sensor General-purpose Type in a Basic Switch Housing Mounting pitch compatible with that of mechanical basic switch. Wide operating voltage range: 10 to 30 VDC or 90 to 250 VAC. LED

More information

2: A, B 3: A, B, Z 4: A, A _, B, B _ 6: A, A _, B, B _, Z, Z _

2: A, B 3: A, B, Z 4: A, A _, B, B _ 6: A, A _, B, B _, Z, Z _ Diameter mm Shaft Type/Hollow Type/Built-In Type Incremental Rotary Encoder Features Diameter mm flange type Suitable for measuring angle, position, revolution, speed, acceleration and distance Power supply:

More information

E2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models

E2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models Long-barrel Inductive Proximity Sensor E2E2 Proximity Sensor with a Long Screw Length Increased tightening strength. Cable protectors provided as a standard feature. Increased indicator visibility. A milled

More information

DC2-Wire Unshielded Cylindrical Proximity Switches

DC2-Wire Unshielded Cylindrical Proximity Switches DC2-Wire Unshielded Cylindrical Proximity Switches FL7M Series Unshielded switches achieve especially long sensing distances Long sensing distance (2 times the sensing distance of a regular FL7M) DC2-wire

More information

FL7M-A Series. Aluminum-chip Immunity DC 2-wire Type Cylindrical Proximity Sensors. Specifications. click FEATURES ORDER GUIDE

FL7M-A Series. Aluminum-chip Immunity DC 2-wire Type Cylindrical Proximity Sensors. Specifications. click FEATURES ORDER GUIDE 6 FL7M-A Series FEATURES Workpieces Reliably Sensed Even if Aluminum or Cast Iron Chips Accumulate on the Sensing Head. This DC 2-wire type proximity sensor can be directly connected to programmable controllers

More information

2.5mm. Output configuration NPN. 2.5mm PNP. 2.5mm

2.5mm. Output configuration NPN. 2.5mm PNP. 2.5mm Compact Square Inductive Proximity Sensor World s Smallest Square Sensor with uilt -in Amplifier 5.5 x 5.5 mm type contributes to smaller, space-- saving machines and devices. Comprehensive range; sensing

More information

Vacuum pump system type

Vacuum pump system type type VS*P Vacuum component C O N T E N T S Series variation 166 20 mm width universal type (/M) 168 10.5 mm width universal type (/M) 184 31.5 mm width discrete type (VSQP) 214 11 mm pitch manifold dedicated

More information

Section. Sensors

Section. Sensors Section Selection Guide... -2 Full Color Recognition SA1J, SA1J-F.................. -4 Analog Laser Color Mark SA1M....................... -10 Laser Displacement MX1A, MX1B................ -15 Self-Contained

More information

Related vacuum products

Related vacuum products Vacuum component C O N T E N T S variation 420 Position locking valve () 422 Compact vacuum regulator () 426 Vacuum break unit () 436 Vacuum filter large volume union type (VSFB) 440 Compact vacuum filter

More information

DC2-Wire Spatter-Guarded Cylindrical Proximity Switches

DC2-Wire Spatter-Guarded Cylindrical Proximity Switches DC-Wire Spatter-Guarded Cylindrical Proximity Switches FL7M Series A variety of anti-spatter measures make these switches the optimum for welding processes on the automotive production line. With Teflon

More information

TECHNICAL GUIDE FOR PROXIMITY SENSORS DEFINITIONS YAMATAKE PROXIMITY SENSOR CATEGORIES

TECHNICAL GUIDE FOR PROXIMITY SENSORS DEFINITIONS YAMATAKE PROXIMITY SENSOR CATEGORIES TECHNICAL GUIDE FOR PROXIMITY SENSORS DEFINITIONS "" includes all sensors that detect the presence of a metallic object approaching the sensing face or near the sensing face without mechanical contact.

More information

2-Color Display High-Precision Digital Pressure Switch

2-Color Display High-Precision Digital Pressure Switch 2-Color Display High-Precision Digital Pressure Switch Settings can be copied to up to 1 slave sensors at once. The settings of the master sensor can be copied to the slave sensors. Reduced setting efforts

More information

Cylindrical type proximity sensor

Cylindrical type proximity sensor Cylindrical type Cylindrical type proximity Features Improved the noise resistance with dedicated IC Built-in reverse polarity protection circuit (DC 3-wire type) Built-in surge protection circuit Built-in

More information

HS1L Interlock Switches with Solenoid

HS1L Interlock Switches with Solenoid HS1L Interlock Switches with Solenoid 3000N locking strength (largest in class)! * Suitable for large and heavy doors. Same actuator as HS1E (actuator retention force 3000N) Six contacts in a compact housing

More information

Sensing distance. 4mm. 4mm. 7mm. 12mm. 20mm

Sensing distance. 4mm. 4mm. 7mm. 12mm. 20mm DC2-wire Square Proximity Sensors FL2R/SSeries This DC2-wire Square Proximity sensor Can Be Directly Connected to Programmable Controllers and Units. Wide Range of Models Available. Reduced wiring costs

More information

Correction Reissue. Product Discontinuation Notices. Discontinuation Notice of Cylindrical Proximity Sensor Model E2E series.

Correction Reissue. Product Discontinuation Notices. Discontinuation Notice of Cylindrical Proximity Sensor Model E2E series. PRODUCT NEWS Correction Reissue Product Discontinuation Notices Proximity Sensors Issue Date August 4, 2014 No. 2014038CE(3) Discontinuation Notice of Cylindrical Proximity Sensor Model E2E series.

More information

DC2-Wire Aluminum-Chip Resistant Cylindrical Proximity Sensors N.O. N.C. N.O. N.C. N.O. N.C. 8mm N.O. N.C. N.O. N.O. N.C. N.O. N.O. N.C.

DC2-Wire Aluminum-Chip Resistant Cylindrical Proximity Sensors N.O. N.C. N.O. N.C. N.O. N.C. 8mm N.O. N.C. N.O. N.O. N.C. N.O. N.O. N.C. DC-Wire Aluminum-Chip Resistant Cylindrical Proximity Sensors FL7M-ASeries Detects workpieces reliably even if aluminum or cast iron chips accumulate on the sensing head. DC-wire proximity sensors can

More information

Supply voltage 12 to 24 VDC (10 to 30 VDC), ripple (p-p) 10% max. 100 to 220 VAC (90 to 250 VAC), 50/60 Hz

Supply voltage 12 to 24 VDC (10 to 30 VDC), ripple (p-p) 10% max. 100 to 220 VAC (90 to 250 VAC), 50/60 Hz R Pancake Style Inductive Prox Long-Range Proximity Sensor Detects Metal Objects at 50 mm H Ideal for many industrial automation applications H Choose DC 3 -wire or AC 2 -wire models H Rugged die -cast

More information

FL7MSeries. DC2-Wire Regular Cylindrical Proximity Sensors

FL7MSeries. DC2-Wire Regular Cylindrical Proximity Sensors DC-Wire Regular Cylindrical Proximity Sensors FL7MSeries Rigid structure, highly waterproof DC -wire sensors with improved visibility of lamps. DC -wire, for reduced wiring costs. Stable sensing area is

More information

HL (AZH) Limit Switches

HL (AZH) Limit Switches COMPACT SIZE LIMIT SWITCHES HL (AZH) Limit Switches Wide selections of actuators, terminals and bodies to meet any application Excellent environmental resistance Die casting caseiec IP67 Plastic caseiec

More information

DC 2-Wire Unshielded Cylindrical Proximity Sensors. Operation mode. Setting indicator N.O. N.C. N.O. N.C. N.O. N.C. N.O. N.C. 20mm N.O. N.O. N.O.

DC 2-Wire Unshielded Cylindrical Proximity Sensors. Operation mode. Setting indicator N.O. N.C. N.O. N.C. N.O. N.C. N.O. N.C. 20mm N.O. N.O. N.O. DC 2-Wire Unshielded Cylindrical Proximity Sensors FL7MSeries Unshielded sensors achieve especially long sensing distances Long sensing distance (2 times the sensing distance of a regular FL7M) DC 2-wire

More information

WINTRISS DIE PROTECTION SENSORS

WINTRISS DIE PROTECTION SENSORS WINTRISS DIE PROTECTION SENSORS Detect Problems Before Damage Occurs The DiPro SENSOR INTERFACE (DSI 2) makes it easy to...... connect most electronic and electromechanical sensors to your SmartPAC and

More information

PHOTOELECTRIC S300 PA MAXI SENSORS APPLICATIONS.

PHOTOELECTRIC S300 PA MAXI SENSORS APPLICATIONS. PHOTOELECTRIC MAXI SENSORS S300 PA The S300 PA series of advanced MAXI photoelectric sensors represents the most suitable solution for standard applications thanks to it s excellent cost/performance ratio.

More information

Proximity Sensor. Shield Size Sensing distance Output configuration Models Shielded M12 3 mm NO E2EQ-X3D1 E2EQ-X7D1 M30 10 mm E2EQ-X10D1

Proximity Sensor. Shield Size Sensing distance Output configuration Models Shielded M12 3 mm NO E2EQ-X3D1 E2EQ-X7D1 M30 10 mm E2EQ-X10D1 Proximity Sensor A Series of Spatter-preventing Proximity Sensors with a Teflon-coated Metal Housing Teflon*-coated metal housing endures high tightening torque. Pre-wired and plug-in models are available.

More information

Operation mode. Sensing distance N.O. N.C. N.O. N.C. N.O. N.C. 7mm

Operation mode. Sensing distance N.O. N.C. N.O. N.C. N.O. N.C. 7mm 6 Specifications FL7N/M Series DC 2-wire Type (shielded/unshielded) Cylindrical Proximity Sensors FEATURES Rigid Structure, Highly Water-proof DC 2-wire Type with Improved Visibility Indicator Lamps. DC

More information

E2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models

E2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models Long-barrel Inductive Proximity Sensor EE CSM_EE_DS_E Proximity Sensor with a Long Screw Length Increased tightening strength. Cable protectors provided as a standard feature. Increased indicator visibility.

More information

Catalog listing. 1to5Vdc (proportional to intensity of incoming light) HPX-MA

Catalog listing. 1to5Vdc (proportional to intensity of incoming light) HPX-MA 6 HPX-MA Series Analog Output Fiber Optic Photoelectric Sensors Specifications FEATURES The HPX-MA Series Features the Strong Capability for a Wide Variety of Applications by Analog Output and Detection

More information

HL (AZH) LIMIT SWITCHES

HL (AZH) LIMIT SWITCHES COMPACT SIZE LIMIT SWITCHES LIMIT SWITCHES U L PRODUCT TYPE 1. Limit Switches Actuator Type Push plunger Roller plunger Cross roller plunger Panel mount push plunger Panel mount roller plunger Panel mount

More information

AC/DC2-wire Type Cylindrical Proximity Switches

AC/DC2-wire Type Cylindrical Proximity Switches AC/DC2-wire Type Cylindrical Proximity Switches FL7M Series No-polarity 2-wire general-purpose switches are easy to use. 2-wire type for both AC and DC greatly reduces wiring man-hours Stable sensing area

More information

Basic Switch Style Inductive Prox TL-M. Ordering Information. General-purpose Inductive Prox in a Basic Switch Housing

Basic Switch Style Inductive Prox TL-M. Ordering Information. General-purpose Inductive Prox in a Basic Switch Housing R Basic Switch Style Inductive Prox General-purpose Inductive Prox in a Basic Switch Housing H Mounting pitch compatible with that of a mechanical basic switch H Wide operating voltage range: 10 to 30

More information

CD34CNFLFxxx. Capacitive sensor, Foreground Suppression. Main features. Main functions. Description

CD34CNFLFxxx. Capacitive sensor, Foreground Suppression. Main features. Main functions. Description Capacitive sensor, Foreground Suppression Main features Compact housing Supply voltage: 10 to 30 VDC Output: 100 ma, NPN or PNP preset Make or break switching function LED indication for output and power

More information

Model Number Structure

Model Number Structure Small Sealed Switch D4E-@N Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E Flat springs with an improved lever ratio of the built-in switch ensure smooth snap action

More information

Cylindrical Proximity Sensor

Cylindrical Proximity Sensor Cylindrical Proximity Sensor A New Series of Easy-to-use and Tough Models with a Yellow Indicator New series of TL-X2C1-GE models with improved performance over the previous TL-X-E models. Also, in addition

More information

0.5 s to 30 h (30 s, 3 min, 30 min, 3 h, 30 h)

0.5 s to 30 h (30 s, 3 min, 30 min, 3 h, 30 h) Mechatronic Analog Timer H3AM Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Refer to Warranty and

More information

VSG Series Features Descriptions VSG VSG VSG Descriptions Supply valve Descriptions Vacuum filter

VSG Series Features Descriptions VSG VSG VSG Descriptions Supply valve Descriptions Vacuum filter Basic performance oriented general vacuum ejector unit Series Nozzle diameter: ø.5, ø, ø1. acuum switch and vacuum break valve, etc. are unitized, so types matching the work purpose is selectable. Features

More information

Miniature Pre-Leaded Vertical Enclosed Switches

Miniature Pre-Leaded Vertical Enclosed Switches Miniature Pre-Leaded Vertical Enclosed Switches 14CE Series Miniature enclosed switches with outstanding harsh environment resistance, ideal for compact machinery and equipment. Easy mounting by tightening

More information