MONSUN DYNAMIC SCREW COMPRESSORS. FLOW RATE 0,9-14,7 m³/min WORKING PRESSURE 7-13 bar DRIVE POWER RATING kw

Transcription

1 MONSUN DYNAMIC SCREW COMPRESSORS FLOW RATE 0,9-14,7 m³/min WORKING PRESSURE 7-13 bar DRIVE POWER RATING kw

2 SINCE ALMOST 100 YEARS A SYNONYM FOR COMPRESSED AIR Almost Innovative 100 years of tradition in developing and manufacturing a wide range of compressor designs with the focus to develop and apply the most advance compressor and air treatment technologies to achieve standard setting and performance for our leading products and technologies. ideas, professional implementation and convincing product quality are the basis for the excellent reputation BLITZ KOMPRESSOREN enjoys and has been guaranteeing on thing above all for years: Satisfied Customers right offer for your requirements: Based on your compressed air needs, BLITZ KOMPRESSOREN will take care of selecting appropriate compressor and air treatment products to provide an optimal solution from initial assessment to system design.

3 RELIABILITY AS A STANDARD A TRUE MASTERPIECE, OUR NEW MONSUN DYNAMIC-SERIES FROM 15 TO 90 KW Through Through frequency-controlled, direct-drive Monsun Dynamic Series permits volume flow adjustment with constant pressure over a very large control range. Thus the Monsun Dynamic can use its advantages as a single installation as well as in combination. frequency control, the delivery quantity can be regulated steplessly between 25 % and 100 % by adjustment. As motor and compressor are connected directly, the regulation of the delivery quantity is performed equivalent by changing the motor speed, which is done directly via the frequency converter corresponding to the customer consumption. adjustment of the delivery quantity, the fluctuation in the compressed air network ideally can be kept constant below 0.1 bar. This avoids the excess compression required with unregulated compressors because of the difference between switch-on and switch-off pressure. Thus considerable energy savings are possible.

4 INVENITABLY EFFICIVE SILENT EFFICIENCY UNIT OF MOTOR AND COMPRESSOR Foto: Dietz Motoren highly efficient compressor unit, driven gearless by a frequency-controlled asynchronous motor via a 1:1 direct drive not only eliminates losses from power transmission, but also guarantees especially low-noise operation. installed compressor drive motors naturally already today achieve the best future-proof efficiencies and reach the motor efficiencies of the Super Premium Class and naturally they are equipped with current-isolated bearings, so important for frequency operation.

5 SURPRISINGLY QUIET AND VERY FFECTEVE RADIAL COOLING FANS Our cooling fans are not only very energy-efficient, but also especially quiet. y master upcoming tasks permanently without disturbing noise generation and thus are gentle for the operator. Another positive factor are the higher available compressions, a blessing especially with connection to exhaust ducts.

6 INSTRUMENTATION CLEAR AND OBVIOUS PROCON 4.0 advantages of the modern touch technology of our new industrial Procon 4.0 control with realistic visualization on color TFT display and the simple, intuitive menu navigation are just fun. operation resembles that of a table or a smartphone Home page offering instant overview of the compressor status Real time clock for pre setting of compressor Start/Stop Fault history log Remote control via programmable inputs Auto restart after power failure SD card to store various run characteristics Optional Webserver connection In PAY SPECIAL ATTENTION TO THE FILTRATION CHAIN; PROVIT FROM OUR NEARLY 100 YEARS OF KNOW-HOW a compressor installation, air/oil separators, air, and oil filters cooperate closely. If one of them operates insufficiently, the other downstream filter systems are impaired in their performance and life.

7 REDUCE YOUR EXTERNAL ENERGY NEEDS AND THE OUTPUT OF CO2 EMMISSION WITH OUR OPTIONALLY INTEGREATED HEAT RECOVERY SYSTEMS Blitz heat recovery system let you use in heat transferred energy for dividend applications, such as: Heating rooms or production places Water heating (e.g. in laundries) Pre-heating of central heating Pre heating of combustion air as combustion air INTEGRATED OIL SUMP Reliably prevents the unintended escape of used oil to the environment. As VERSATILE INSTALLATION THANKS TO CLEVER CONSTRUCTION the intake air is sucked in via the equipment front and the exhaust air exits to the top, installation is possible even in corners. This saves space. Also ideal for container solutions, and backup installations can be installed mirror-inverted back-to-back. In this way, both compressors can be connected to one exhaust duct. installations can be moved from all sides with lift trucks. Necessary maintenance work can be performed comfortably from two sides. Oil and air filter oil elements are replaced via the equipment front. Likewise, suction controllers, minimum pressure valve and oil controller, air filter from the side. sound-absorbing panels can be removed in seconds.

8 TECHNICAL SPECIFICATION m³/min Nominal Dimensions 7 bar 10 bar 13 bar KW W x D x H kg R db (A) DYNAMIC 15 2,7-0,9 2,0-0,9 1,5-1, x750x G1 68 DYNAMIC 18 3,2-0,9 2,5-0,9 1,75-1,0 18,5 1550x750x G1 69 DYNAMIC 22 3,9-1,1 3,2-1,1 2,7-1, x750x G1 70 DYNAMIC 30 5,2-1,1 4,3-1,1 3,7-1, x750x G1 71 DYNAMIC 30 plus 5,8-1,2 4,2-1,2 3,4-1, x990x G 1 1/4" 70 DYNAMIC 37 6,2-1,2 5,2-1,2 4,0-1, x990x G 1 1/4" 70 DYNAMIC 45 7,8-1,2 6,3-1,2 5,5-1, x990x G1 1/4" 71 DYNAMIC 55 8,6-1,2 7,3-1,2 6,4-1, x990x G 1 1/4" 72 DYNAMIC 55 plus 10,5-3,4 8,4-3,3 7,1-3, x1225x G 1 1/2" 73 DYNAMIC 75 13,7-3,4 11,2-3,3 9,6-3, x1225x G 1 1/2" 74 DYNAMIC 90 14,7-3,4 12,6-3,3 11,0-3, x1225x G 1 1/2" 75 *) Flow rate complete system as per ISO 1217 : 2009 Annex C: Absolute inlet pressure 1 bar (a), cooling and air inlet temperature 20 C **) Sound pressure level as per ISO 2151 and basic standard ISO , tolerance +/- 3 db (A) Subject to change BlitzRotary GmbH Hüfinger Straße 55 D Bräunlingen Telefon Telefax info@blitzrotary.com