TRIUMPH KIT INFORMATION

Size: px

Start display at page:

Download "TRIUMPH KIT INFORMATION"

Darrell Reynolds
6 years ago
Views:

TRIUMPH KIT INFORMATION What is included in Kit? The kit is made up of modules. so that you can pick and choose to suit the style of bike you want to create.

1 TRIUMPH KIT INFORMATION What is included in Kit? The kit is made up of modules. so that you can pick and choose to suit the style of bike you want to create. Each module is supplied complete with step by step instructions to guide you through the build process. If you do get stuck there is help on hand via our technical support Sub Frame Module This is the basic building block for converting your bike. It transforms the shape of the frame to create a new look. Jig built, welded subframe which bolts in position after removal of existing rear frame members. Includes fixings and spacers. Mounting tray for electrics. Supplied powder coated Black or Grey to match original frame. Also available bare metal for painting by customer. Rear Light Bracket Bolts to rear of subframe to mount rear number plate. Complete with LED rear light unit Available painted Satin Black or Chrome Silver. Also available bare metal for painting by customer Footrest Module - Cafe Racer Includes new mounting plates, spacers and fixings to re-position foot controls for rear set style. Utilises original foot controls. Includes rear master cylinder rebuild kit and silencer mounting brackets. Supplied powder coated Black or Grey to match original frame. Also available bare metal for painting by customer. 1 of 8

2 Footrest Module - Roadster Includes modified mounting plates with extensions for rear footrest and silencer mount. Utilises original foot controls. Includes rear master cylinder rebuild kit. Supplied powder coated Black or Grey to match original frame. Also available bare metal for painting by customer. Exchange service available to reduce cost (we buy your old footrest hangers) Seat Module - Cafe Racer Seat base moulding in GRP supplied black gel coat for painting by customer. Underseat tray with battery mounting brackets and heavy duty cables. Upholstered seat base and rear pad in black leather with Triumph Logo. (Other options available on request) Metalwork supplied powder coated Black or Grey to match original frame. Also available bare metal for painting by customer. Seat Module - Roadster Upholstered Dual Seat with high density foam. Available black or brown.seat base moulding in GRP supplied black gel coat for painting by customer. Underseat tray with battery mounting brackets, splashguard and heavy duty cables. Metalwork supplied powder coated Black or Grey to match original frame. Also available bare metal for painting by customer. Grabrail Polished stainless steel, can be used with cafe racer or roadster seats. 2 of 8

3 Fuel Tank Litre Capacity Low profile design for sleek lightweight look. Alloy inner tank suitable for modern fuels. GRP cover supplied in black gelcoat for painting by customer. Water expansion tank for cooling system Fuel tap and fittings. Fuel Tank Litre Capacity Larger capacity for extended range. Alloy inner tank suitable for modern fuels. GRP cover supplied in black gelcoat for painting by customer. Water expansion tank for cooling system. Fuel tap and fittings. Side Panels Complete with brackets and fasteners. GRP covers supplied in black gelcoat for painting by custom Metalwork supplied powder coated Black or Grey to match original frame. Also available bare metal for painting by customer. Instruments Module New alloy housings for original clocks. Available in two styles to suit Daytona/ Sprint or later Trophy Instruments. Includes LED s for warning lights. Supplied powder coated Satin Black Complete with brackets and fasteners. 3 of 8

4 Headlamp Module - For Clip On Handlebars Retro Chrome Headlamp Shell. Reflector, H4 headlamp bulb and pilot bulb. Chrome rim and clips. Headlamp mounting rubbers and brackets. Brackets supplied powder coated Satin Black Headlamp Module - For Std Handlebars Retro Chrome Headlamp Shell. Reflector, H4 headlamp bulb and pilot bulb. Chrome rim and clips. Fork shrouds with headlamp mounting brackets. Brackets supplied powder coated Satin Black Front Mudguard Module GRP Short Mudguard Blade supplied in black gelcoat for painting by customer. Alloy mudguard Brackets available painted Satin Black or Chrome Silver. Also available bare metal for painting by customer Fixings Pack. Hugger Alloy blade bolts to top of swing arm. Available painted Satin Black or Chrome Silver. Also available bare metal for painting by customer Fixings Pack. 4 of 8

5 Chainguard Alloy with cut outs, bolts to top of swing arm. Available painted Satin Black or Chrome Silver. Also available bare metal for painting by customer Fixings Pack. Radiator Cover Alloy construction with Triumph T pattern. Two sizes to suit either cylinder or cylinder bikes. Available painted Satin Black with silver mesh or Chrome Silver with black mesh Fixings Pack. Tope Yoke Conversion Modified top yoke fitted with handlebar clamps to suit 28mm Fat Bars Powder coated satin black. Exchange service available to reduce cost (we buy your old yoke) 5 of 8

Suitable Donor Bikes The kit is designed to fit the Sprint, Trident, Daytona, Trophy & Speed Triple models which were manufactured from 1992-1996 (a few were made later).

When it comes to finding a donor bike the price and condition should be the first consideration. The engine and frame will be on display so look at that to check if the finish is still ok.

6 Suitable Donor Bikes The kit is designed to fit the Sprint, Trident, Daytona, Trophy & Speed Triple models which were manufactured from (a few were made later). It will also fit the later Trophy models made up to All these bikes have the T300 engine with carburettors and the spine frame. When it comes to finding a donor bike the price and condition should be the first consideration. The engine and frame will be on display so look at that to check if the finish is still ok. Sometimes a model with a fairing will have protected the motor from the worst of the weather. The instrument module supplied with the CRK Kit is designed to accept the instruments fitted to Sprint & Daytona models. The Trident and most Trophy instruments are not suitable so the correct instruments will need to be sourced secondhand. Similarly bikes fitted with the big cast alloy touring footrest hangers such as Sprint Executive and later Trophy models will need to have them swapped for the earlier type. The Daytona and Sprint models are probably the best bet if the price and condition is ok. Will the kit fit the 1200 four cylinder models? The kit will fit the 4 cylinder model as all the bikes shared the same basic frame and cycle parts. There are one or two small differences between the bikes and we have developed alternative parts for the 1200 models. 6 of 8

What different parts are supplied to make the kit fit the four cylinder models? The fuel tank has the petrol tap in a different position so that it will not clash with the engine.

trimming before painting. The radiator cover to suit the 1200 is a little bigger.

Unfortunately, our kit doesn't fit the Thunderbird, Tiger or Adventurer. This is because their frame is built differently and the clocks have a different shape.

7 What different parts are supplied to make the kit fit the four cylinder models? The fuel tank has the petrol tap in a different position so that it will not clash with the engine. The carburettors are higher on the 1200 so it may be necessary to add some small cut outs to the bottom of the tank cover for clearance but this is easy as it is just the fibreglass that needs trimming before painting. The radiator cover to suit the 1200 is a little bigger. The instrument module for the later Trophy models is bigger to accept the larger speedo and tacho with the chrome bezels. I've got a Thunderbird in the shed, will your kit fit this? Unfortunately, our kit doesn't fit the Thunderbird, Tiger or Adventurer. This is because their frame is built differently and the clocks have a different shape. What is involved in carrying out the conversion? The conversion requires that the original subframe fitted to bike is removed and replaced with the CRK unit. The original subframe is welded construction so the instructions explain how it can be cut away from the main frame. The CRK Subframe can then be bolted in position and the remaining parts of the kit built around it. Original Subframe removed. CRK Subframe installed 7 of 8

8 Are there instructions with the kit? Yes, there is a very detailed build manual provided with the kit. It takes you step by step through the whole process of building your bike. There are photographs of each stage in the build and it includes information about: Preparing the donor bike. Strip down. Installing the kit parts. Wiring and connectors. Tips and Tricks. CRK are also available by phone or to support you with more technical things you may not feel confident with. Is there any welding required? No, the new subframe and all the other parts supplied with the kit are bolted in position. Does the Subframe come ready painted? Yes, the subframe and associated metalwork is supplied in textured black or metallic grey to match the original Triumph frame colours. If you want the subframe supplied bare metal to do your own painting that can be arranged also. Does the tank come ready painted? The fibreglass parts (Tank, Seat Base & Front Mudguard) are supplied in black gelcoat. They will need to be sanded & filled prior to painting. Find yourself a good auto painter or have a go yourself! You can use your creativity this way and give your bike a touch of uniqueness. What equipment will I need to build the bike? If you have a shed, garage or workshop, tools such as spanners, screwdrivers etc and some understanding of mechanical processes you will be able to manage the build. Most of our customers enjoy the experience of creating their bikes. How long will it take to build the bike? The CRK modifications take about 40 hours on average. You may spend more time if you are re-furbishing parts of the bike or doing your own paintwork. We have had customers build a bike in two weeks and others have taken several months, as long as you enjoy it that s ok by us. Can I order the seat without the tank? We don't encourage this because the two items rely on one another for mounting points. However we understand that some more experienced builders may want to do their own thing for the tank so the subframe can be bought separately if required. What do I do with all the parts after the strip down? Sell them! This will help to fund your project. 8 of 8

Donor Bikes The kit is designed to fit Honda CB250N & CB400N Superdreams made from 1978 to 1984,

Donor Bikes The kit is designed to fit Honda CB250N & CB400N Superdreams made from 1978 to 1984, HON 0/00N KIT INFORMTION What s in the Kit? The kit is made up of modules. You can buy the complete kit or individual modules as you progress with your project. Each module is supplied complete with step