ARES Convincing arguments.

Transcription

1 Convincing arguments The comfort cab of the 800 with its extremely spacious and highly ergonomic design totally redefines the notion of the workplace. The suspension system, which has up to eight points, eliminates stress and fatigue even when working long hours. The exceptional all-round visibility guarantees an excellent view of all implements and mounting areas. The modern, fuel-saving and low-emission engines have enormous torque and up to 8 kw (11 HP) of extra power. The series offers an extremely wide selection of transmission options for absolutely any requirement. The load-sensing hydraulic system enables several hydraulic control units to be used simultaneously. The electronic linkage control enables precise matching of the extremely powerful hydraulics to the most varied conditions. Thanks to its considerable steering angle, the tractor has extraordinary manoeuvrability. Regular maintenance work can be carried out in a simple and straightforward fashion, but most importantly without the use of tools. Technical highlights such as INFOTRAC, DRIVETRONIC AND ELECTRO- PILOT provide extra benefits to the driver. 25 CLAAS KGaA mbh P.O. Box 1163, D Harsewinkel, Germany Tel /04 (DC) englisch 60/

2 No compromising on comfort or performance. Front axle ES 2 3

3 Meets growing demands and expectations. The a tractor designed for you. To farm owners and contractors, two things are of particular importance: comfort and reliability. With its exceptional comfort, high reliability and versatility, and excellent performance capacity, the from CLAAS is the perfect tractor for the demanding professional. Unbeatable comfort combined with the highest degree of reliability. Work is made considerably easier and productivity greatly increased. Comprehensive range of equipment and high efficiency. 4 5

4 Panoramic view and comfort: a class in itself. Exceptional, unparalleled suspension comfort. Work without tiring or damaging your health Perfect view of all implements An absolutely perfect place to work. The cab is a workplace in the The best equipment for a long working day. The four-point suspension on the cab Classic cab best sense of the word: spacious, well laid-out, operator-friendly and exceptionally comfortable. The suspension system on the, means much less exposure to tractor vibrations. The result: working in the cab leaves you fit and fatiguefree when compared to unsprung Fatigue RZ cab Hrs. which has up to eight points, makes cabs. The suspension system with a considerable contribution to its legendary comfort. The numerous adjustment options for the comfort independent front axle suspension, the fully sprung cab, comfort seat and vibration damping at the rear linkage together guarantee a unique driving experience and improved safety on the road and in the field. Excellent all-round visibility. The forward cab position, the generously proportioned glazed areas and the slim cab pillars give you 320 degree vision. seat also allow you to find your ideal seating position. This means that Four times the comfort. All tractors are equipped with a after a long day at work you still feel fit and well. Independent suspension for a better drive. The PROACTIV front axle with independent suspension not only improves driving comfort, but also provides improved safety at high on-road driving speeds. A good rear view too. The generously proportioned rear window, the in-cab rear view mirror, as well as a rear view mirror at the rear, fully sprung cab. Each of the four provide you with excellent visibility of corners of this unique tractor cab the implements, enabling them to be is fitted with a shock absorber. manoeuvred with greater precision. Vibrations at the axles and chassis are The wide, front opening roof on the thus optimally absorbed and the gives excellent high visibility. driver is protected to the best possible degree from jolts and vibrations. 6 Get in and out of the cab with ease. Getting into the cab is safe and easy. This is guaranteed by the handrail and the non-slip surface of the steps. 7

5 Real strength for the toughest jobs. Performs beautifully. With a torque back-up of up to 33%, the enormous tractive power of these engines can effortlessly handle any situation whether hard ploughing or N.m ch MAX PS g/kwh pulling heavy loads on gradients. With extra power of up to 8 kw (11 HP), you can also be sure that you can stand your ground when faced with excess load work. A powerhouse for all types of work. With a maximum power rating in accordance with ECE R 24 from 121 kw (164 HP) to 151 kw (205 HP), the 800 fully satisfies the needs of large arable farms as well as those of largescale farms and contractors. The latest powerful and extremely economical 6.8 l six-cylinder engines, with a turbocharger and electronically controlled fuel injection are used in the tractors. The engines in the 800 are key to the supreme performance of this top class tractor. Reliable, fuel-saving engines with high tractive power Precise fuel dosage means low fuel consumption High torque even at low engine speed 8 9

6 It goes without saying that maintenance takes almost no time at all. Simply a matter of minutes. The is designed for long working periods. Long service intervals between oil and filter changes contribute considerably to keeping downtime due to maintenance to a minimum. Good accessibility and straightforward servicing, combined with the unique CLAAS spare parts service, all add up to the shortest of downtimes and a high level of safety. Easy and rapid tractor servicing Exceptionally good accessibility of all important engine parts Non-productive time is minimal thanks to rapid spare part replacement. Straightforward fuelling and fast checking of oil levels The shows its best sides. The side panels of the bonnet are removed with ease. This gives you perfect access to the right and left side of the engine for service and maintenance work. A high level of comfort, even for maintenance work. Servicing the is not a difficult task, it is extremely quick and simple. The side panels of the bonnet open easily, the bonnet nose lifted and the radiator folded away all without tools, naturally. The high degree of comfort offered by the A breath of fresh air - the air filter. Keep your cool when cleaning the radiator. Refuelling made easy. Oil checks without a hitch. You ll be happy to take a look. even translates to those The air filter and safety The radiator is easily The fuel tank on the The engine oil level on the A quick look at the rear of the apparently tiresome tasks. cartridge are easily accessed and cleaned by is easily accessed and can be checked in an instant, as is sufficient to read the replaced. On the lifting the bonnet nose. filling up is as simple as there is no need to remove the transmission and hydraulic oil 800, service intervals are On the 800, the fuelling a car. With up to side panels to reach the dipstick. levels. The min/max display extremely long as the air condenser for the air- 300 l capacity plus 70 l, Topping up the oil level is just as informs you immediately filter is cleaned by dust conditioning system and thanks to an optional quick, as the measuring pipe is whether you need to top up the suction through the the oil cooler are easily auxiliary fuel tank, the also the top up pipe. oil levels. exhaust. removed for cleaning. is ideal for long jobs

7 II 4 A3 II 4 A1 II 3 A3 800 Well equipped for every application. II 3 A1 II 2 A3 II 2 A1 II 1 A3 II 1 A1 I 4 A3 I 4 A1 I 3 A3 I 3 A1 I 2 A3 I 2 A1 I 1 A3 I 1 A km/h The 800 offers a wide range of transmissions - there is a suitable solution for every requirement: whether the QUADRISHIFT II electrohydraulic 4 speed splitter transmission or the QUADRACTIV automatic electrohydraulic 4 speed splitter transmission, the transmission ranges of this top class tractor give you unlimited choice. The REVERSHIFT shuttle reverser, operated at the touch of your fingertips, complements the transmissions range

8 Shifting and selecting whenever you want. Step up a gear. All gearboxes enable you to be fully in control of your working speed, allowing you to concentrate fully on your implements. Regardless of load, type of terrain or soil conditions, your work will always be to the same standard, ensuring high productivity. If you shift a gear, on the road for example, then QUADRISHIFT II will select the powershift stage that is closest to the actual speed. QUADRACTIV automatically switches the four stages of the powershift gearbox according to the engine speed and the position of the accelerator pedal. At the end of the field the 826, with its FULL POWERSHIFT transmission, shifts down to the gear stored by you at the touch of a button, and then shifts back up into the previously selected gear. Shifting made easy. Comfort is also a major feature of shifting on the 800. All transmission shifting functions are performed via a single lever: selection of the synchronised gears, shifting under load, declutching etc. The is easy to drive in all these situations. The level of shifting comfort is completed by the REVERSHIFT shuttle reverser that you control with your fingertips. Information in the right place. The display on the right A-pillar provides you with continuous information on the gear you have selected. Touch-sensitive transmission. In this class, only the can offer a true shuttle reverser with two oilcooled multi-disc clutches that control forward and reverse travel. With the REVERSHIFT hydraulic reverser, you can change the direction of travel with a touch of your fingertips at any speed and in any gear. Extraordinary range of transmission options Increased productivity thanks to exceptional ease of shifting A true under-load reverser Double the control. Additional operator controls on the right B-pillar for all transmission options control the transmission without unnecessary effort, especially convenient when working with implements. Full power or ECO. You are ploughing heavy land and need maximum performance, or you want to make a short road trip while saving fuel? Then select the POWER or ECO mode of QUADRACTIV by simply pressing a switch. The splitter will shift automatically into the best stage for the job at hand

9 The flexes its powerful muscles. Forward looking. The rear hydraulics can lift an impressive 11.3 t and the 800 also has an impressive front linkage. The load-sensing hydraulic system enables several hydraulic control units to be used simultaneously. It is possible to use heavy front-mounted equipment combinations and large high-output machines, bringing you enormous savings in terms of costs and work time. Superb implement control. The INFOTRAC on-board computer sends data measured on the tractor to the implement via a 7-pole ISO socket. The field crop sprayer or the fertiliser spreader computer then calculates, for example, the optimum output quantity in relation to the speed of the tractor. Fast connection guaranteed. The hitch area of the is well designed and ergonomically optimised. A wide choice of drawbar versions is available for hitching equipment. The breakaway connections of the easily accessible control module block enable rapid and straightforward hitching and unhitching. By means of two buttons on the wings, the mechanical linkage can be safely operated from outside the cab. Powerful even at the front. With a maximum lifting capacity of 5.3 tonnes on its front linkage, the can also lift heavy front loads. The electro-hydraulically controlled front power take-off shaft has smooth operation, preventing wear and tear on the implement mechanics. Control in comfort. The gives you a choice between two electronic linkages according to your requirements in terms of comfort. The vibration damping and an active wheel slip control provide improved safety for easy work and maximum traction. Impressive lift capacity of both front and rear linkage Optimum use of the most diverse range of front-fitted implements Fast and straightforward connection of the implements 16 17

10 The simply offers you more. Beautifully turned. Time is a precious commodity. Especially during peak periods, such as haymaking or late autumn sowing, manoeuvrability. The turning circle of 4.90 m makes the one of the most agile tractors in its class. To achieve an optimum turning circle, the Everything under control. The integrated DRIVETRONIC management and control system continuously analyses the most important components such as the engine, transmis- sion, power take-off, linkage, differential, etc. This means the tractor can be operated at its highest productivity and performance level, with minimum intervention by the driver. Less idle time during turning manoeuvres Excellent manoeuvrability Work safely with the highest productivity Operate implements with the greatest precision Extremely user-friendly control of the load-sensing system when unnecessary non-productive front wings turn to the side, thus facil- time should be avoided wherever itating full wheel deflection. possible. With the 800, no real time is lost when turning the tractor. The generous steering angle of up to 55 endows the tractor with excellent Everything to hand. The joystick controls two electrohydraulic spool valves with high precision and sensitivity. As the ELEC- TROPILOT is a progressive control system, you can precisely control the movement of the implements, for example the raising and lowering of a packer roller, by operation of the joystick. Well-organised control. With ELECTROPILOT, the load-sensing Oil quantity system on tractors now has electro-hydraulic control. Control of the system is via a joystick, which is Suits you. fitted at the front end of the right arm- The ELECTROPILOT operator panel is rest. Its well laid-out positioning pro- integrated within the right cab pillar. vides you with a natural, comfortable Two controllers allow you to precisely and fatigue-free driving position for measure the flow rate of both electro- long working days. Ergonomics can hydraulic spool valves. Or set one of hardly be more impressive and, above all, more comfortable! Travel of the joystick the spool valve blocks to continuous feed and control the speed of the hydraulic motor

11 accessible, high-quality and fast. There whenever you need us. Being accessible to you, our customer, is the prime directive of the CLAAS service concept. For this reason, CLAAS has set up a an extensive sales and service network for its customers. CLAAS, importers and distribution partners will always be at your side, providing a first-class spare parts delivery service and reliable customer service around the world. This applies to harvesting equipment and naturally also to CLAAS tractors. Particularly come harvest time and other peak working times, such as silage making or late autumn sowing, we know that every second counts. This is why the most important ORIGINAL CLAAS parts for your machine are always close at hand and promptly available. A strong partner at your side. The CLAAS distribution partners are among the most efficient agricultural engineering companies worldwide. They know how farms work and are aware of the high expectations of CLAAS customers. The factory-trained technicians of CLAAS partners and their workshops and service vehicles equipped with specialist tools ensure prompt assistance and a perfect service on site. CLAAS SERVICE you can depend on us! Always ready when needed. The fast and competent service provides farmers and contractors with the best possible support. The CLAAS customer service will of course do everything it can to ensure you don t need it in the first place, but if you ever should need assistance, we will be there for you immediately with our experience and the latest diagnostics systems. The METADIAG diagnostics system enables fast troubleshooting for CLAAS tractors and updating of machine functions even while in the field without any difficulty

12 ARE ES Technical Specifications Engine Manufacturer Deere Power Systems Front axle Manufacturer CARRARO Bore/stroke (mm) / Displacement (cm 2 ) Number of cylinders / Cooling 106,5 / 127 / / water cooled Design of PROACTIV sprung front axle lockable from the cab, parallelogram independent suspension with electrohydraulic control Power rating (kw/hp) at 2200 rpm in accordance with ECE R / / / wheel drive electrohydraulically controlled multi-disc clutch, maintenance-free Max. power (kw/hp) at 2000 rpm in accordance with ECE R / / / 205 Differential locks electrohydraulically controlled multi-disc clutch, maintenance-free Max. torque (Nm/rpm) 664 / / / 1650 Torque back up (%) Optimum fuel consumption (g/kwh) Electronic engine management yes 202 Rear axle Manufacturer Gima Turbocharger yes Differential locks electrohydraulically actuated multi-disc clutch Charge-air cooler yes Viscous fan yes Oil change interval every 500 hours Driving safety Fuel tank capacity (litres) optional optional optional Braking system hydraulic braking system with brake servo, automatic engagement of 4-wheel drive Battery (V/Ah) 12 / 157 Compressed-air generation system Alternator (V/A) 14 / 95 Hydraulic trailer brake system Front axle suspension Transmission Vibration damping Manufacturer Gima Max. speed (km/h) REVERSHIFT 40 (at reduced engine speed) Dimensions and weights (depending on equipment) with the following tyres 16.9 R R R R R R 42 Model Reverse gearbox with full powershift Unladen weight, incl. fuel, not incl. driver or ballasting (kg) mit QUADRISHIFT 6514 mit FULLPOWERSHIFT 6450 Type consisting of planetary gearset with 2 oil-cooled multi-disc clutches, Overall length not incl. front weights (mm) electrohydraulically controlled Max. overall width (mm) Overall height (mm) QUADRISHIFT / QUADRACTIV Wheelbase (mm) Type of gearbox mechanical gearbox with electrohydraulic 4 speed splitter and Ground clearance (mm) range shift Min. turning circle (m) 4,9 4,9 4,9 Mechanical gears 4 Powershift stages per gear 4 Field/road range group Automatic functions on QUADRISHIFT can be switched electrohydraulically while driving automatic selection of powershift stage during gear change Hydraulics Type of hydraulic pump various versions available Automatic functions on QUADRACTIV functions same as QUADRISHIFT plus engine-speed dependent Total flow rate (l/ min) 110 change of powershift stages (ECO / Power mode) Working pressure (bar) 200 Creep range Auxiliary spool valves (max.) 5 Max. number of gears (depending on option) 64 forward / 64 reverse Load-Sensing Cross command lever Full- Power- Shift (! 826 only! ) Armrest with joystick Manufacturer Funk Flow rate control yes Type of gearbox mechanical gearbox with full electrohydraulic powershift Connections coupled under pressure yes Number of gears 18 forward / 8 reverse Creep gears (option) Power take-off Power take-off clutch 36 forward / 16 reverse electrohydraulically controlled multi-disc clutch Rotational speeds (rpm) depending on option 540 / 540 eco and 1000 Replaceable power take-off shaft stub 6 / 21 spline Front power take-off (rpm) depending on option 1000 Ground speed power take-off Rear linkage Max. lifting capacity (kg) Continuous lifting capacity (kg) 7690 Electro-hydraulic linkage control (EHR) External actuation of linkage Vibration damping Lower link arm with catch hook Front linkage Various versions available, depending on country Cab Type Cab suspension Driver's seat Steering column Ventilation system Cab heating Air conditioning Opening rear window Stereo radio with 2 loudspeakers Rear window wiper On-board computer 7-pin ISO data socket Work lights Tyre options integrated, soundproofed and fully-sprung safety cell 4-point full suspension with 3 adjustable spring settings comfort seat, air suspension with backrest extension, lumbar support, swivels from left to right Adjustable for height and reach blower in roof and in instrument panel 4 front / 4 rear Front axle tyres Rear axle tyres R 28 (420/85 R 28) Adjustable rims* 20.8 R 38 (520/85 R 38) Adjustable rims* x x Fixed rims* Fixed rims* x x 16.9 R 30 (420/85 R 30) Adjustable rims* 20.8 R 42 (520/85 R 42) Fixed rims* x x x Fixed rims* 620/70 R42 Fixed rims* x x x 480/70 R 28 Adjustable rims* 580/70 R 38 Adjustable rims* x x Fixed rims* Fixed rims* x x 540/65 R 28 Adjustable rims* 650/65 R 38 Adjustable rims* x x Fixed rims* Fixed rims* x x 600/65 R 28 Adjustable rims 710/70 R 38 Fixed rims x x x Fixed rims x x x 600/65 R28 TOPKER Adjustable rims 650/75 R38 TOPKER Fixed rims x x x Fixed rims x x x 480/70 R 30 Adjustable rims* 710/70 R 38 Fixed rims* x x x Fixed rims* 620/70 R 42 Fixed rims* x x x 540/65 R 30 Adjustable rims 650/65 R 42 Fixed rims x x x Fixed rims x x x * Combination of adjustable / fixed rims (different axles) possible CLAAS continually strives to adapt its products to better meet practical requirements. We therefore reserve the right to change technical specifications. Information and illustrations are only to be considered as an approximation and may include optional equipment that is not supplied as standard. This leaflet has been printed for worldwide use. Please refer to the price list of your CLAAS sales partner regarding the technical equipment. On some photos protective devices have been removed in part to illustrate the function. All machines are supplied in accordance with applicable machinery directives