COMPRESSION COUPLINGS Exclusive Design Features Outer Shell and Bar Washer The unique design provides an equalized pressure seal.
|
|
- Amanda Reed
- 6 years ago
- Views:
Transcription
1 The only economical couplings available to connect (or repair) threaded or unthreaded pipe or tubing of any size f rom 1/ thru including metric sizes and a rare oneof-a-kind size tubing. COMPRESSION COUPLINGS Exclusive Design Features Outer Shell and Bar Washer The unique design provides an equalized pressure seal. Nuts and Bolts comes ready to slip on with electroplated nuts and bolts in place ready to be tightened with a single wrench. Gasket Die-cut tooth design assures low or high pressure seal for both gaseous and liquid materials. Black neoprene is standard gasket, but rubber, white neoprene, high temperature and other gasket materials are available. Inner Sleeve Precision die-cut teeth help apply equal pressure to the entire pipe circumference to attain positive seal plus extra rigidity. Compression s with Gasket Protectors Are Factory Assembled no loose parts Automatically compensate for field installation variations causing exposure of gaskets prevent pinched gaskets at butt connections. Gasket Protectors are of Type 0 stainless steel with interlocking teeth excellent for protection against abrasion and corrosion. For special corrosive application, specify Teflon Gasket Protectors Gasket Protectors provide positive gasket protection against abrasion or corrosion with no adverse effect on pressure capabilities. They prevent gasket wear which occurs when pipe or tubing ends do not butt completely. This gap is often unavoidable and always undetectable. In pressure systems this condition exposes the gasket to the abrasive action of grains, feeds, resins, pellets and other granular material. In vacuum systems, gasket protectors without Protectors can be drawn into the line enough to cause excessive wear and eventual system leaks. In either type system this may result in undesirable contamination of the materials being handled. CS-010- s
2 The compression pipe coupling is designed for permanent installation in the joining of either plain end, threaded, grooved or a combination of any of these joints. The band type construction holds the entire surface of the joint in uniform compression. s are made of heavy gauge zinc plated steel...prices of aluminum or stainless steel couplings may be quoted on request. Gaskets furnished standard in white or black neoprene...please specify. Gaskets also available in a variety of other materials at a slight extra charge. Condensed Table of Specifications Size 1/ - -7/ OD OD -1/ - OD -1/ - 8-/ OD 9 - OD Shell Thickness Sleeve Gasket COMPRESSION COUPLINGS Tubing or Nom. Tubing Pipe (IPS) Size Pipe (A) Code no. Length (B) of Bolts Size of Bolts /1 x 1-1/ /1 x 1-1/ /1 x 1-1/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ Weight Each (lbs.) / PIPE / PIPE 1 TUBING 1 PIPE 1-1/ TUBING 1-1/ PIPE 1-1/ TUBING 1-1/ PIPE 1-/ TUBING TUBING PIPE -1/ TUBING -/1 TUBING -1/ TUBING -1/ TUBING -1/ PIPE -/ TUBING TUBING PIPE -1/ TUBING -1/ TUBING /-C /-C 1-C-OD 1-C 1-1/-C-OD 1-1/-C 1-1/-C 1-1/-C-OD 1-1/-C-OD 1-1/-C 1-1/-C 1-/-C-OD 1-/-C-OD -C-OD -C-OD -C -C -C -1/8-C-OD 1-1/8-C-OD -/1-C-OD -/1-C-OD -1/-C-OD -1/-C-OD -1/-C-OD -1/-C-OD -1/-C -1/-C -1/-C -/-C-OD -C-OD -C-OD -C-OD -C -C -C -1/-C-OD -1/-C-OD -1/-C-OD -C -C -C CS-010- s
3 To Prevent Static Electricity Build-up in Bulk Material Conveying Systems, specify compression s with grounding strips...be sure to state if your requirements call for aluminum or stainless steel strips. Stainless steel grounding strips are standard, aluminum grounding strips or couplings without grounding strips are available at the same price. To Eliminate Gasket Wear, or contamination of material flowing through the system lines, specify couplings with Stainless Steel GASKET PROTECTORS. COMPRESSION COUPLINGS For Tubing and Pipe Tubing or Nom. Tubing Pipe (IPS) Size Pipe (A) 1/ PIPE -/ TUBING TUBING PIPE -1/ TUBING -1/ TUBING 1/ PIPE -/ TUBING TUBING PIPE -1/ TUBING -1/ TUBING -/ TUBING TUBING PIPE 7 TUBING TUBING PIPE 9 TUBING Code no. -1/-C -1/-C -1/-C -/-C-OD -/-C-OD -1/-C -1/-C -1/-C -C -C -C -1/-C-OD -1/-C-OD -C -C -C -1/-C -1/-C -1/-C -/-C-OD -/-C-OD -1/-C -1/-C -1/-C -C -C -C -1/-C-OD -1/-C-OD -1/0C-OD -/-C-OD -/-C-OD -C-OD -C-OD -C-OD -C-OD -C -C -C -C 7-C-OD 7-C-OD 7-C-OD 8-C-OD 8-C-OD 8-C-OD 8-C-OD 8-C 8-C 8-C 8-C 9-C-OD 9-C-OD Length (B) 1 1 of Bolts Size of Bolts Black Weight Gasket* White Gasket* Each (lbs.) PIC 01000BFG 01000BFG 01000BFG 0107B 0107B 01000BFG 01000BFG 01000BFG 01000BFG 0100BFG 0100BFG 010B 010B 0100BFG 0100BFG 0100BFG 01000BFG 01000BFG 01000BFG 0107B 0107B 01000BFG 01000BFG 01000BFG 010B 010BFG 010BFG 010B 0100B 0100B 0107B 0107B 01000BFG 01000BFG 01000BFG 01000B 010B 010BFG 010BFG 010B B B B BFG BFG BFG B 0108B 0108B 0108BFG 0108LB B B PIC 01000W 01000WFG 01000FG 0107W 0107W 01000WFG 01000WFG 01000WFG 01000WFG 0100WFG 0100WFG 010W 010W 0100WFG 0100WFG 0100WFG 01000WFG 01000WFG 01000WFG 0107W 0107W 01000WFG 01000WFG 01000WFG 010W 010WFG 010WFG 010W 0100W 0100W 0107W 0107W 01000WFG 01000WFG 01000WFG 01000W 010W 010WFG 010WFG 010W W W W WFG WFG WFG W 0108W 0108W 0108WFG 0108LW W W CS-010- s
4 To Prevent Static Electricity Build-up in Bulk Material Conveying Systems, specify compression s with grounding strips...be sure to state if your requirements call for aluminum or stainless steel strips. Stainless steel grounding strips are standard, aluminum grounding strips or couplings without grounding strips are available at the same price. To Eliminate Gasket Wear, or contamination of material flowing through the system lines, specify couplings with Stainless Steel GASKET PROTECTORS. COMPRESSION COUPLINGS For Tubing and Pipe Tubing or Nom. Tubing Pipe (IPS) Size Pipe (A) Code no. Length (B) of Bolts Size of Bolts Weight Each (lbs.) , Black Gasket PIC White Gasket PIC TUBING PIPE 1 TUBING 1 PIPE C-OD 10-C-OD 10-C-OD 10-C 10-C 10-C 1-C-OD 1-C-OD 1-C-OD 1-C 1-C 1-C 1-C0OD 1-C-OD 1-C-OD 1-C-OD 1-C-OD 1-C-OD 1-C-OD 1-C-OD 1-C-OD 1-C-OD 1-C-OD 1-C-OD 18-C-OD 18-C-OD 18-C-OD 0-C-OD 0-C-OD -C-OD -C-OD -C-OD -C-OD B BFG B 01107B 01107B 01107B 01100B 01100B 01100B 0117B 0117B 0117B 01100B 01100B 01100B 01100B 01100B 01100B 01100B 01100B 01100B 01100B 01100B 01100B B B B 01000B 01000B 0100B 0100B 0100B 0100B W W W 01107W 01107W 01107W 01100W 01100W 01100W 0117W 0117W 0117W 01100W 01100W 01100W 01100W 01100W 01100W 01100W 01100W 01100W 01100W 01100W 01100W W W W 01000W 01000W 0100W 0100W 0100W 0100W CS-010- s
5 QUICKON II COUPLERS QUICKON II COUPLERS can be installed or removed with a twist of the wrist. No tools or special skills needed. The positive locking system turns easily to seal or to compensate for normal pipe or tubing tolerances. This in-lone coupler is ideal for use where fast takedown and reassembly of lines is essential, reduced coupler weight is desirable, a line or system is frequently modified, wraparound installation is necessary, and where pressure does not exceed 0 psi. QUICKON COUPLERS FEATURES: Super fast installation and takedown...no tools. DUAL QUICKON II COUPLERS One piece construciton...no loose pieces. No special pipe preparation required. Adjusting screw and thick gasket assure positive seal and even compression over the entire joint...will not damage thin wall tubing. Stays closed in spite of expansion, contraction or vibration. Exceptionally lightweight...a quickon weighs 1 1/ lbs. compared to / lbs. for a standard coupling. CS s
6 STAINLESS STEEL STAINLESS STEEL FOR PNEUMATIC OR VACUUM CONVEYING SYSTEMS Quickon II Couplers can be installed or removed with a twist of the wrist. No tools or special skills needed. The positive locking system turns easily to seal or to compensate for normal pipe or tubing tolerances. This in-line Coupler is ideal for use where: Fast takedown and re-assembly of lines is essential, reduced coupler weight is desirable, a line or system is frequently modified, wrap around installation is necessary, and where pressure does not exceed 0 psi. QUICKON COUPLERS QUICKON II COUPLERS Size In Code Weight Each (lbs.) Food Grade Gasket PIC 0101F 011F 0171F 01901F 0001FFG 011F 01F 071F 001FFG 071F 0871F 0001FFG 01F 001FFG 071F 0001FFG 01F 001FFG 0001FFG 01F 0001FFG 01F 01F 08001FFG 081F 09001F 10001F Standard Quickon II Couplers listed are in length. DUAL QUICKON II COUPLERS Size In Code Food Grade Gasket PIC 8000F 800F 8000F 8000F 80F 80800F 808F 81000F 8107F 8100F 817F Dual Quickon II Couplers listed are 9-1/ in length. Specifications: All stainless steel construction including band, strike plate, handle screw and yoke. Gasket is abrasionresistant, gum rubber attached to band. Static conducting grounding strip included on request. ORDER by SIZE, CODE NO. AND GASKET Request prices on special sizes not shown. Prices subject to change without notice. CS s
7 The GRIPPER was devised as a quick coupler for dry bulk transport tank tubing. This unique coupling just slides onto the tubing or wraps around it and is tightened by hand in seconds but it provides better support than rubber hose and band clamps. Our exclusive fail-safe clamping action keeps its hold despite expansion, contraction and vibration. The Gripper s positive sealing interlocking gum gaskets allow for tube and pipe variations. And because its made of 100% stainless steel, it will not corrode due to harsh weather or road conditions. Silicone and F.D.A. approved gaskets are available. The GRIPPER Size In.(A) Code Size In.(A) Code G G-10-1 G G G G-1-1 G G-0-1 G-7-1 G-00-1 G--1 G-70-1 G-87-1 G G-1-1 G-0-1 G-0-1 G-00-1 G G-0-1 G-00-1 G-70-1 G G G--1 G-70-1 G G-0-1 G-00-1 G--1 G-00-1 G G Size In.(B) G G G G G Code G-000- G-1- G-0- G-00- G-70- G-000- G-0- G-00- G-70- G-000- G-0- G-00- G-- G-70- G-000- G-0- G-00- G-- G G-8- G G G G G-170- Special sizes available upon request CS s
8 The unique design of the Side-Band Compression coupling gives you vastly improved axial force holding power to connect or repair threaded or unthreaded pipe and tubing. Dual locking side bands grip the pipes and allow higher operating pressures than those normally suggested for standard compression couplings. Especially effective where line vibration is a problem, and on plastic pipe. You get all the positive sealing advantages of the compression coupling in a coupling that can hold its own in fighting end pull. PATENT PENDING Available for 1 1/ thru nominal pipe or tubing sizes including millimeter sizes. Static grounding strips or stainless steel gasket protectors are also available. SIDE BAND COMPRESSION COUPLINGS of Pipe or Tubing Inches Code -C-0D-SB -C-SB 1/-C-OD-SB 1/-C-SB -C-OD-SB -C-OD-SB -C-SB -C-SB 1/-C-SB 1/-C-SB -C-SB -C-SB 1/-C-SB 1/-C-SB -C-SB -C-SB Wgt. Ea. (Lbs.) of Pipe or Tubing Inches Code -C-OD-SB -C-OD-SB -C-SB -C-SB 8-C-OD-SB 8-C-OD-SB 8-C-SB 8-C-SB 10-C-OD-SB 10-C-OD-SB 10-C-SB 10-C-SB 1-C-OD-SB 1-C-OD-SB 1-C-SB AS-C-SB Wgt. Ea. (Lbs.) Note: For Side-Band coupling length - add 8 inches to basic coupling length. WHEN ORDERING - Always give the Code and of the pipe or tube on which coupling will be used. 1. Same price applies for couplings with Red Rubber Gaskets.. Stainless steel or aluminum grounding strips are available at the same price. Contact Chada for prices of couplings with Teflon Gasket protectors. Prices for larger and/or special sizes available on request. CS s
9 Clear look at the material flowing Smooth Straight-Thru interior Air-Tight Seal Sighting section can be furnished in Pyrex A grounding strip, permanently attached, eliminates Fast, easy installation SIGHT GLASSES TUBING OR PIPE INSERTED IN CLEAR ACRYLIC IN FOLLOWING SIZES: Tubing Sizes with Aluminum Ends PART NO. SG 11/-OD-1 SG -OD-1FG SG -OD-11FG SG 1/-OD-1FG SG 1/-OD-1FG SG 1/-OD-11 SG -OD-1FG SG -OD-11FG SG 1/-OD-1 SG 1/-OD-11 SG -OD-1FG SG -OD-11FG SG 1/-OD-1 SG 1/-OD-11 SG -OD-1 SG -OD-11FG SG -OD-11FG SG -IPS SG 1/-IPS OVERALL A TUBE B Pipe Sizes with Steel Ends TUBE I.D. C Pipe Sizes with Aluminum Pipe Ends SG -AP SG 1/-AP CLEAR ACRYLIC INSERTED IN PIPE IN FOLLOWING SIZES: Pipe Sizes with Steel Ends PART NO. SG -IPSFG SG 1/ -IPS SG -IPSFG SG -IPS SG -IPSFG OVERALL A TUBE B Material: Aluminum Tubing 01-T and 0-T Sight Glass Cast Acrylic Resin Steel Pipe Schedule 0 Aluminum Pipe Schedule 0 (Available in Schedule & 10) Prices of special sizes and materials including Pyrex sighting section available on request. TUBE I.D. C Pipe Sizes with Aluminum Pipe Ends PART NO. SG -AP SG 1/ -AP SG -APFG SG -AP SG -APFG OVERALL A TUBE B TUBE I.D. C Prices subject to change without notice. When ordering, please be sure to use the correct part number. Also list tubing or pipe and wall thickness. Prices of special sizes and materials available on request. CS s
10 Part A ADAPTOR - ALUMINUM FEMALE THREAD NPT 1 1/ 1A. 0A. 1/ A. 0A.7 0A 1. 0A.0 0A. 8 80A - Part B Part C COUPLER - ALUMINUM THREAD MALE NPT 1 1/ 1B.7 0B 1.0 1/ B 1. 0B.0 0B.1 0B.0 0B B - QUICK COUPLINGS HOSE CLAMP COUPLER - ALUMINUM 1 1/ 1C 1.0 0C 1. 1/ C 1. 0C. 0C. 0C. 0C C - Part D COUPLER - ALUMINUMTHREAD FEMALE NPT 1 1/ 1D.8 0D 1.1 1/ D 1. 0D 1.9 0D.0 0D.1 0D D - Part E HOSE SHANK ADAPTOR - ALUMINUM 1 1/ 1E. 0E.7 1/ E.91 0E 1. 0E. 0E.0 0E. 8 80E - CS s
11 Part F MALE ADAPTOR - ALUMINUM 1 1/ 1F. 0F. 1/ F.81 0F 1. 0F.0 0F.8 0F F - SECURITY CHAIN Part Lbs C-1.10 Part V DUST CAP - ALUMINUM 1 1/ 1V.7 0V 1.0 1/ V V 1.7 0V. 0V. 0V. 8 80V - Part W DUST CAP - ALUMINUM 1 1/ 1W.7 0W 1.0 1/ W W 1.7 0W. 0W. 0W. 8 80W - WELD PARTS Part AW ADAPTOR - ALUMINUM - SOCKET OR BUTT WELD 1 1/ 1AW.7 0AW.7 1/ AW. 0AW.8 0AW 1. 0AW 1. 0AW AW.0 Part DW COUPLER - ALUMINUM - SOCKET OR BUTT WELD 1 1/ 1DW.87 0DW.91 1/ DW 1.1 0DW.1 0\DW. 0DW.1 0DW DW 8.1 CS s
12 Quick Change Couplers, with easy grip Compression Nut requires no welding or epoxy to assembly your pneumatic conveying systems All Couplers and Adapters with Compression Nuts are made of aluminum. They are designed for low pressure conveying systems and field installation, for use with.0 tubing size from 1 1/ inches to inches. Exploded View with Adapter Typical assembly ADAPTER WITH COMPRESSION NUT PART NO. SIZE IN INCHES 1-FC 1 1/ 0-FC -FC 1/ 0-FC COUPLER WITH COMPRESSION NUT COMPRESSION NUT REPLACEMENT PARTS PART NO. SIZE IN INCHES 1-CNUT 1 1/ 0-CNUT -CNUT 1/ 0-CNUT 1-GSKCNUT 1 1/ 0-GSKCNUT -GSKCNUT 1/ 0-GSKCNUT PART NO. SIZE IN INCHES 1-BC 1 1/ 0-BC -BC 1/ 0-BC CS s
Call Toll Free: Toll-Free Fax:
PAGE Compression Couplings For Tubing and Pipe... 1-3 With Gasket Protectors... 4 Side-Band Couplings... 5 Replacement Gaskets... 6 Quickon Couplers... 7 Morris Gripper Couplers... 8 Repair Clamps All
More informationCall Toll Free: Toll-Free Fax:
www.morriscoupling.com PAGE Compression Couplings For Tubing and Pipe... 1-3 With Gasket Protectors... 4 Side-Band Couplings... 5 Replacement Gaskets... 6 Quickon Couplers... 7 Morris Gripper Couplers...
More informationFounded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry.
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. COUPLING PRODUCTS Compression Couplings Side-Band Couplings Quickon II Couplers
More informationContainer and Drum Dumpers, Tilters, Inverters and Lifts, as well as Bulk Bag Filling and Discharge Systems
U Shamrock Systems, Inc. is a manufacturer's representative firm involved in the design and sales of pneumatic, mechanical, storage, process systems and related components to the industrial market for
More informationNorth American Miscellaneous Connectors
Combustion North American Miscellaneous Connectors 8775 Quick Disconnects for Oil, Compressed Air, and Natural Gas Bulletin 8770 FEATURES The 8775 couplings allow you to couple and uncouple your hoses
More informationClamps. for Plastic Tubing & Hose. Fluid Transfer Specialists
Clamps for Plastic Tubing & Hose Fluid Transfer Specialists Oetiker Clamps Ear Type Clamps Oetiker ear type clamps breathe and adapt to the expansion and contraction of hose affected by thermodynamics
More informationProduct Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
More informationB U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More informationSteam & Hot Water INSTRUMENTS. Adjustable Angle Industrial Thermometer. Econo Thermometer. ] Aluminum Stem. ] Air-Duct Stem
Adjustable Angle Industrial Thermometer Recognized globally as the Trerice BX Industrial Thermometer, this is an instrument of extreme accuracy and rugged dependability. Available in scale lengths of 7"(AX),
More informationTransportation Products
Transportation Products Butterfly Valves Hopper Tees Actuators Accessories A Name You ve Trusted for Years... Resilient Seated Butterfly Valves 400 & 480 Series 1 Piece Body Design This economical, resilient
More informationAdvantages of Grooved Fittings
Grooved Fittings Advantages of Grooved Fittings Comparative Advantages Allows angular deflection-misalignment Expansion, contraction or, no need for expansion joint Reclaimable, no need for union Allows
More informationProduct Information Report Industrial Hose: Multipurpose Air and Water Hose
Overview and Water Hose is primarily used to either provide air to power tools such as grinders, sanders and jackhammers, or to provide water to washdown equipment such as cement mixers, and to provide
More informationFLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK. This work covers part of outcome 2 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome 2 is
More informationSM64052 Maintenance & Repair Manual Commercial 2" Unisex Coupling - Valved Model 64052
Aerospace Group Conveyance Systems Division Carter Brand Ground Fueling Equipment SM64052 July 2004 Applicable additional manuals: SM64051 Commercial 2" Unisex Coupling, Non-Valved Maintenance & Repair
More informationO RINGS FDA AND USP CLASS VI
O RINGS FDA AND USP CLASS VI PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY How to size your O -Rings Elastomer Characteristics If you don t know the size or number of the O -Ring, you will need to determine
More informationTRANSLATION (OR LINEAR)
5) Load Bearing Mechanisms Load bearing mechanisms are the structural backbone of any linear / rotary motion system, and are a critical consideration. This section will introduce most of the more common
More informationUrethane. Ralphs-Pugh Urethane Products
Ralphs-Pugh Products elastomers are unique because they combine many of the advantages of rigid plastics, metals and ceramics with the elasticity of rubber. resists abrasion and reduces the affects of
More informationPneumatic Connector, Tubing, and Accessory Catalog
Pneumatic Connector, Tubing, and Accessory Catalog Pneumatic Quick Connectors Plastic Tubing and Adaptors Tube Connectors and Manifolds Plumbing Tools Contents Plastic Tubing 1 Plastic Tubing Specifications
More informationCompression Fittings & Valves. Make the connection
Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system
More informationSmooth Flow Tubing & Fittings Specifications
Smooth Flow Tubing & Fittings Specifications 2 Index Index TUBING... 3 Standard Elbows & Bends Bending Capabilities... 4 Standard Radius Elbows... 5 Short Radius Elbows... 5 Standard Long Radius Bends...
More informationDifferential Rewind Shafts
Differential Rewind Shafts More accurate tension control for light tension applications. Dynamically balanced central shaft. Suitable for cardboard and all types of plastic cores. Easier loading of cores
More informationO-Ring Swivel Joints
O-Ring Swivel Joints O-Ring Parts Identification List 1. O-ring (dust) seal 2. ball retainer screw 3. O-ring (pressure) seal 4. grease fitting 5. ball bearings O-Ring he O-ring pressure seal ensures a
More informationVB VALVES & AUTOMATION
Introduction to Valve What are Valves? Valves are mechanical device that controls the flow and pressure within a system or process. They are essential components of a piping system that conveys liquids,
More informationMechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications
82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal
More informationSmall bending radius of only 4-5 times the internal diameter. Burst Pressure. Working Pressure. (kgf/cm2) (at 20 C) (kgf/cm2) (at 20 C) ALL 0002
240 HOSES Yellow Air Hose Light in weight and very durable. Small bending radius of only 4-5 times the internal diameter. ALL 0001 The 2-ply polyestter yarn braided construction delivers high working and
More informationIndex. Butterfly Valves
Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft
More informationPolyvalve TM Black Label TM Pipe Repair Clamps
Polyvalve TM Pipe Repair Clamps Pipe Repair Clamps - FLOWSERVE POLYVALVES S.A.S. repair clamps are flexible clamps, made out of one or several stainless steel bands with lugs. Bolts and nuts mounted on
More informationPage ATALOGUE. Web: Tel: Fax:
Page ACUUM PARE ANKER ARTS ATALOGUE Page 2 CONTENTS PAGE GAUGES 3 SAUNDERS M TYPE VALVES 4 LEVER BALL VALVES 5 GATE VALVES 6 AIR ACTUATED VALVES 7 KNIFE GATE VALVES 8 ACRYLIC SIGHT TUBE 9 RUBBER SUCTION
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationFLEET ESSENTIALS QUICK REFERENCE GUIDE Fax Burke Street, Santa Fe Springs, CA 90670
WE MAKE PRODUCTS THAT MAKE A DIFFERENCE FLEET ESSENTIALS QUICK REFERENCE GUIDE For new and innovative products, visit www.phillipsind.com (B-FE-ENG) 9-26-16 12070 Burke Street, Santa Fe Springs, CA 90670
More informationSmooth Flow TUBING & FITTINGS SPECIFICATIONS
Smooth Flow TUBING & FITTINGS SPECIFICATIONS 2 Index INDEX TUBING...3 Standard Elbows & Bends Bending Capabilities...4 Standard Radius Elbows...5 Short Radius Elbows...5 Standard Long Radius Bends...6
More informationBall & Socket Fittings (Bauer Style)
Page 96 Ball & Socket Fittings (Bauer Style) Elbow-Bauer Style 3-1/ * *1 MM 76 89 108 133 159 194 2 300 * Locking Bar (part # 9-7318) for & 1 Lever is Sold Separately 6-9038 6-9039 6-9040 6-9041 6-9042
More informationFord Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
More informationargco.com
800-854-1015 argco.com STRUT SUPORT SYSTEM STRUT SUPPORT CHANNEL US Strut Support Channel Quick, strong attachment of single or multiple pipes horizontally or vertically Unlimited applications - range
More information5. STRAUB-FLEX / STRAUB-REP
5. STRAUB-FLEX / 5.1 STRAUB-FLEX For gas and water supply, sewage treatment, industrial plants, power plants and shipbuilding: STRAUB- FLEX is the optimal pipe joint. Suitable for suction or pressure lines,
More informationCamlocks. Snaplock Camlock Couplings. The original Snaplock quick release coupling. Applications
Snaplock Camlock Couplings The original Snaplock quick release coupling The tried & trusted cam coupling with the high reputation of the Snaplock brand name offering additional features to our standard
More informationCOB ADVANTAGES Quality, lightweight, durable nylon. 20% lighter than metal. Tough/shatter-proof and easily cleaned and maintained,
LOW PRESSURE NYLON EXPANSION PLUGS 0.5 to 6 CAST ALUMINUM EXPANSION PLUGS 1 1/2 TO 36 These superior, versatile, expandable plugs are used to accommodate a wide variety of industrial applications where
More informationTransair. Specification Submittal
Specification Submittal About Parker: Transair is part of the Parker Hannifin Corporation (NYSE: PH), which was founded in 1918. With annual sales exceeding $13 billion, Parker Hannifin is the world s
More informationPPT 802, Proximity Probe Transducer System
PPT 802, Proximity Probe Transducer System PPH 080 : Proximity Probe Head PEC 036 : Probe Extension Cable PRD 020 : Proximity Probe Driver Feature Non-contacting measurement system based on eddy current
More informationWE MAKE PRODUCTS THAT MAKE A DIFFERENCE 12070 Burke Street Santa Fe Springs, CA 90670 Fax: 800-597-7757 B-FE-0509 www.phillipsind.com ABS LECTRACOIL 5 YEAR WARRANTY Assembly Only See website for details
More informationFord Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
More informationPILLOWS DECK-MOUNT BATH FAUCET WITH FLUME SPOUT
PILLOWS DECK-MOUNT BATH FAUCET WITH FLUME SPOUT BEFORE YOU BEGIN NOTES Observe all local plumbing and building codes. Advance planning before installation is crucial. Carefully read the entire instructions
More informationINDUSTRIAL VACUUM SYSTEMS HOSE, TOOLS & ACCESSORIES
INDUSTRIAL VACUUM SYSTEMS HOSE, TOOLS & ACCESSORIES HOFFMAN & LAMSON ENGINEERED VACUUM SYSTEMS Industrial Vacuum HOSES, TOOLS & ACCESSORIES Commercial Duty Hoses Crushproof Plastic 4 Flexible Plastic 4
More informationHose & Hose Clamps. EPDM Rubber Pressure Hose. Hose & Clamps. EPDM Rubber Hose
Need a hose to transfer liquid, dry material, dust, or fumes? We have hoses for almost every material and application, featuring Parker, Sun-Flow, and Flexaust from 1/8 to 8 diameter. Make sure the hose
More informationORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
More informationt e s t p l u g s 5.1 mechanical test plugs pneumatic TEST plugs drain test caps 9
5 t e s t p l u g s 5.1 mechanical test plugs 2 5.2 pneumatic TEST plugs 6 5.3 ACCESSORIES FOR PNEUMATIC plugs 8 5.4 drain test caps 9 5.1 mechanical TEST PLUGS KWIK N SURE PLUGS For temporary shut-off
More informationModel Model Model
Filter Separators Model 9003 Model 9004 Model 9001 & 9032 Model 9002 EXAIR's Filter Separators remove water, dirt and rust from your compressed air system. They prevent these contaminants from plugging
More informationPARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-500PT PISTON TYPE PUMP INDEX - Parts Page Drawing page - Fluid End Detail page - Piston Assembly, Liner & Pony Rod Detail page - Water Manifold Assembly Detail page 5 - Oil Manifold Assembly
More informationStyle 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date
Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications
More informationFOOD & BEVERAGE HOSE
FOOD & BEVERAGE 7 Hoses all require a tube that will not contaminate the food product being conveyed. In the same way that rubbers and thermoplastics are formulated to handle different chemicals, gases
More informationHP20 Series. Utilizes a Small #20 Size Shell Accommodates Up to 646 MCM Cable Patents Pending
HP20 Series Utilizes a Small #20 Size Shell Accommodates Up to 646 MCM Cable Patents Pending RigPower s mission is to create new industry standards in industrial electrical connectors by combining appropriate
More informationSELF-SEALING FASTENERS
CATALOG SF300 SELF-SEALING FASTENERS & SELF- SEALING WASHERS Recognized WHEN JUST FASTENING ISN T ENOUGH When just fastening isn t enough. Pre-assembled O-Ring Seals in Geometric Groove Visit our website
More informationTUF-SKIN VALVES. Universal sales 1~1~2O15. Catalog ~ Price List. UNIVERSAL SALES Booth Street Junction City, OR
Universal sales TUF-SKIN VALVES Catalog ~ Price List 1~1~2O15 MEMBER MANA Manufacturers Agents National Association UNIVERSAL SALES 92311 Booth Street Junction City, OR 97448 www.universalsales.biz Ph:
More informationButterfly Valves Actuators Limit Switches
PF04092017 Butterfly Valves Actuators Limit Switches infocenter@airmatic.com www.airmatic.com 888.964.3886 +1 215.331.9770 284 Three Tun Rd. Malvern, PA 19355 Unlike other valves that seal with friction,
More informationROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
More informationO RINGS, GASKETS, DIAPHRAGMS SIZING GUIDE FDA AND USP CLASS VI
O RINGS, GASKETS, DIAPHRAGMS SIZING GUIDE FDA AND USP CLASS VI O -Rings PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY How to size your O -Rings Newman Elastomer Characteristics If you don t know the
More informationIntegrated Process Solutions. Series 88. CF Component Ultra high vacuum fittings Sizes 1 1/3'' to 4 5/8''
Integrated Process Solutions w w w. m k s i n s t. c o m Series 88 CF Component Ultra high vacuum fittings Sizes '' to '' Manufactured by MKS to industry standards, Series 88 components are a full line
More informationInstallation Instructions
Installation Instructions Bulletin 237471 MACXLine 8-3/16" Rigid Coaxial Transmission Line Including Inners Only Replacement Systems Revision E Contents Description 1 Components 1 Installation Tool Kit
More informationCouplings, hose clamps and pneumatics
Cejn 310... 79 Cejn 320... 79 Cein 331... 80 Cejn 421... 80 Cejn 223... 81 Cejn 341... 81 Cejn 410... 82 Cejn 550... 82 Cejn 342... 83 Cejn 347... 83 Cejn 220... 84 Cejn 171 (Acetylen)... 84 Cejn 172 (LPG)...
More informationFTMP-8 AND FTMP-12 Midget Puller Units
401 Andover Park East Seattle, Washington 98188-7605 USA (206) 246-2010 FTI OPERATIONS, MAINTENANCE AND REPAIR MANUAL FTMP-8 AND FTMP-12 Midget Puller Units FTI Part #2720-021 Revision A November 18, 2011
More informationSnap-tite E / EA-Series
Snap-tite E / EA-Series eneral Purpose and Vacuum Couplings eaturing... Snap-tite quality with superior pressure and flow characteristics over the competition. Snap-tite's EA Series quick disconnect coupling
More informationPistol Grease Guns. AC475 comes complete with 4" steel extension and 4-jaw coupler with ball check AC476 comes complete with 18" flexible
Lubricating Mini Pistol Grease Guns Deluxe Single-hand-operated pistol grip Die cast grease gun head with dual discharge ports for use with steel extension as well as flexible hose Develops 3500 PSI Capacity:
More informationProducts of integrity from people of integrity. w w w. n e w m a n g a s k e t. c o m
Products of integrity from people of integrity. O -RINGS w w w. n e w m a n g a s k e t. c o m 1 How to size your O -Rings Newman Elastomer Characteristics If you don t know the size or number of the O
More informationONYX VALVE CO MODEL CAR, CAP-PFO Installation & Maintenance
ONYX VALVE CO MODEL CAR, CAP-PFO Installation & Maintenance OPERATION: (4-2010) The Onyx series CAR-PFO and CAP-PFO pinch valves fail open on loss of air. The simple spring and air bag arrangement drives
More informationPlastics & Packaging ONE STOP SHOPPING. Canada USA
T H E C O N V E Y I N G P R O D U C T S P E O P L E Plastics & Packaging C O N V E Y I N G P R O D U C T S G U I D E Canada 1-800-263-1942 USA 1-800-263-7782 sales@lorenz.ca www.lorenzproducts.com ISO
More informationK B J K A C H D E I F. Single and Bi-Parting Electric Sliding Doors with Automatic Operator (ICC-5) Parts List. R-PLUS Cold Storage Doors
Single and Bi-Parting Electric Sliding Doors with Automatic Operator (ICC-) Parts List K B J K A C H G Release Date: -0 D E R-PLUS Cold Storage Doors NE 9th Portland, Oregon 90 Toll Free () 0-99 Fax (0)
More informationBand Heaters Maxiband Heaters Maxiband The Most Sought After Band Heater
Band Heaters Maxiband Heaters Maxiband The Most Sought After Band Heater A B C D E F General purpose terminal box offers excellent protection to the exposed terminals. To simplify electrical wiring, the
More information4410 TwinHydrostatic Gas Seal
IS0 9001 CERTIFIED CHESTERTON FLUID SEALING DIVISION INSTALLATION INSTRUCTIONS 4410 TwinHydrostatic Gas Seal SEAL INSTALLATION Preparation Determine if the pump is in good condition. A. Check the shaft
More informationSection 8 AMERICAN. Flanged Pipe
Section 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either
More informationMATERIAL HANDLING TUBING. Featuring durable Aluminum & Abrasion- and Corrosion-Resistant Stainless Steel Materials.
Page 118 IN STOCK! MATERIAL HANDLING TUBING Featuring durable Aluminum & Abrasion- and Corrosion-Resistant Stainless Steel Materials. STAINLESS TUBING ALUMINUM TUBING O.D GAUGE PART NO. PRICE PER FT. WEIGHT
More informationPlumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
More informationCompression Fittings & Valves. Make the connection
Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system
More informationHOSES. nozzle BRASS QUICK SEWER NOZZLE TAPE WASHER HIGH PRESSURE HOSE TOOLS TURBO HIGHER PSI RATING. o rings WASH SOAP CHISELING FLUSHING BLASTING
PRESSURE WASHER CENTER CATALOG BRASS QUICK coupling HIGH PRESSURE HOSE o rings TAPE HOSES HIGHER PSI RATING WASHER TURBO nozzle TOOLS for the trade SEWER NOZZLE WASH SOAP CHISELING FLUSHING BLASTING brass
More informationA PREMIER SERIES FLAT FACE COUPLERS ISO Interchange
A PREMIER SERIES FLAT FACE COUPLERS ISO 16028 Interchange The A Premier Series Flat Face ISO 16028 Interchange Couplings offer higher pressure ratings, superior flow characteristics, and lower pressure
More informationModel Model 815
Model 600004 Model 600204 Model 85387 Model 600104 Model 815 ir line products and accessories ir couplers and nipples............................... 196 low guns, tire inflators and siphon sprayers.............
More informationNEW! BOOSTER PUMPS. HBP/HBPS series 4" horizontal booster pumps. booster pumps
HBP/HBPS series 4" horizontal The HBP/HBPS Series Booster Pumps are the most durable available. The patented SignaSeal floating impeller design minimizes thrust loads, allowing for continuous operation
More informationJIS G (SGP)
JIS G 3452-1988 (SGP) Nominal size Outside Diameter Thickness Unit Weight (plain end) A B mm in mm in lb/ft kg/m 6 1/8 10.5 0.413 2.0 0.079 0.282 0.419 8 1/4 13.8 0.543 2.3 0.090 0.438 0.652 10 3/8 17.3
More informationINSTALLATION MANUAL BULLET PROOF OIL COOLER KIT F-SERIES
INSTALLATION MANUAL BULLET PROOF OIL COOLER KIT 2003-2007 F-SERIES NEAL TECHNOLOGIES, INC. U.S. PATENT 8,375,917; 8,505,512 and OTHER PATENTS PENDING UPDATED 1/8/2018 2014 BULLET PROOF DIESEL BEFORE You
More informationSPARE PARTS CATALOG TC LD AP TD S LP ACE SERIES BREWERS
SPARE PARTS CATALOG TC LD AP TD S LP ACE SERIES BREWERS TS TABLE OF CONTENT Base Assemblies Pages 3-5 Cover Assemblies Pages 6-7 Tank Assemblies Pages 8-13 Micro Switch & Bracket Assemblies Page 14 Valve
More information155 CARTRIDGE SINGLE SEAL
MECHANICAL SEAL INSTALLATION INSTRUCTIONS 155 CARTRIDGE SINGLE SEAL SEAL INSTALLATION Preparation Determine if the pump is in good condition. A. Check the shaft or sleeve. 1. Remove all burrs and sharp
More informationWhat is BF? Tubes Sprockets Grooves Coatings & Platings Axles Axle Machining Bearings Roller Assembly Tapers Formed Tubes Special Features
ROLLERmANUAL Table of Contents What is BF? Tubes Sprockets Grooves Coatings & Platings Axles Axle Machining Bearings Roller Assembly Tapers Formed Tubes Special Features Applications Questions to Ask 2
More informationStyle 233-L & 234-L Rubber Joints
Style 33-L & 3-L Rubber Joints Style 33-L Rubber s are designed for piping systems that experience large lateral offsets due to settlement. The Style 33-L is a low profile triple arch design with a built-in
More informationFLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR
FLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR Bortek Pipe Coupling Systems info / order by mail bortek@bortek.com.tr info / order by Fax +90 / 212 876 55 26 info / order
More informationNeoprene. Steel or Brass
The low air inclusion product line is designed for air conditioning, refrigerant, gaseous and fluid transfer applications. Product Features connections for versatility of installation on tubing or hose
More informationFIG Gruvlok Flanges
Gruvlok Flanges The Gruvlok Fig. 7012 Flange allows direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The two interlocking halves of the 2" thru 12" sizes of the
More informationType 80 Wafer and Type 81 Bolt-Thru Isolation Rings. Installation, Maintenance and Safety Instructions
Type 80 Wafer and Type 81 Bolt-Thru Isolation Rings Installation, Maintenance and Safety Instructions 2018 Ashcroft Inc., 250 East Main Street, Stratford CT 06614 USA Tel: 203-378-8281 Fax: 203-385-0602
More informationChlorine Valves and Accessories
Chlorine Valves and Accessories Chlorine Cylinder & Ton Container Valves Standard Chlorine Institute Design & Alternate Design 1 ALTERNATE VALVE DESIGN vs. STANDARD CHLORINE INSTITUTE VALVE DESIGN FOR
More informationCOMPRESSED AIR LOADER MODEL: AL-1
COMPRESSED AIR LOADER MODEL: AL-1 Document: AL-1 IM 10-22-2011 TABLE OF CONTENTS Important Notices and Precautions 3 Quick Installation 4 Product Description 4 Principle of Operation 5 Unpacking and Inspection
More informationDOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
More informationFigure 1: HB Series Ball Valve Cross Sectional View DISASSEMBLY WARNING: MAKE CERTAIN THE SYSTEM IN WHICH THE VALVE IS INSTALLLED IS EXHAUSTED OF ALL
Maintenance Instructions MI-142 Revision - HB Series Ball Valve MAXIMUM ALLOWABLE WORKING PRESSURES Table 1 Maximum Allowable Working Pressure versus Seat Material Seat Stainless Steel Material Body Material
More informationEXPANSION SEAL TECHNOLOGIES DC /01 REV 2 06/05 PAGE 1 OF 4
EXPANSION SEAL TECHNOLOGIES DC9567 11/01 REV 2 06/05 PAGE 1 OF 4 OPERATING PROCEDURES FOR GRIPTIGHT HIGH PRESSURE TEST PLUGS WITH ALTERNATE SEAL MATERIALS Description: GripTight plugs supplied with alternate
More informationNEW YORK AIR BRAKE. Air Hose Products. Catalog & Application Guide/ Freight Car & Locomotive
NEW YORK AIR BRAKE Air Hose Products Catalog & Application Guide/ Freight Car & Locomotive P R O D U C T I V I T Y T H R O U G H T E C H N O L O G Y Air Hose Assemblies & Fittings New York Air Brake is
More information18. KSP 18. KSP 18.1 1200016 1200016 18.2 18.3 1200016 1200016 18.4 18.5 1200016 1200016 18.6 18.7 1200016 1200016 18.8 18.9 1200016 DARLEY BASIC ASSEMBLING TECHNIQUES Work with clean tools in clean surroundings
More informationForm 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationMaximum speed ratings are based on light loads and reflective of bore sizes: 1/2 =6000 RPM, 5/8 =5000 RPM, 3/4 =4500 RPM, and 1 =3500 RPM
8 Bearing selection Factors We recommend that testing be done in the actual operating environment to determine if a certain bearing unit is suitable for the application. Many variations can occur such
More informationAir operated Pinch Valve type VMC
Air operated Pinch Valve type VMC Flange Internal Thread Tri-Clamp Weld-on ends Threaded spigot The flexible modular system for detachable and aseptic piping connections! The ideal solution for isolation
More informationFLANGE. Flanges used for
FLANGE FLANGE Flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1 2 through NPS 24 ASME B16.5: Pipe Flanges and Flanged Fittings (NPS 24 ) ASME B16.47: NPS 26
More informationSection 3 Index Furnace Tube Skin Thermocouples
Section 3 Index Furnace Tube Skin Thermocouples Thermocouple Assemblies Model Page O1 Bare End Terminations 3-1 O2 Lead Wire Extension 3-2 O3 SS Flex Armor Extension 3-3 O4 CGB Over SS Flex Armor 3-4 Thermocouple
More informationRANGER FLANGE ADAPTORS
RANGER ADAPTORS RANGER products, in the form of wide range couplings and flange adaptors, are designed to join pipes of various outside diameters with the same or different nominal bore. Because of the
More information