ecom-j2knpro PARTS LIST PART NUMBER

Transcription

1 ecom-j2knpro S LIST Water Trap Filter (10/PK) G $ /PK - particulate filter located on top of water trap assembly In-line Smoke Filter Standard(1 EACH) H $ Each - standard 3/4" in-line filter in clear plastic casing Soot Test Paper (200/PK) G $ /PK - round smoke test filters for smoke dot test NOx/SOx Filter Media (1LB) G $49.00 Refill container (purple beads) Soot Test Chart G $10.00 Soot test chart with 0-9 grayness scale Thermal On-Board Printer Paper (5/PK) H $35.00 Printer paper Main Battery (J2KN) H $ Battery Ni-MH Remote Battery Pack H $85.00 Battery pack for handheld Refillable NOx/SOx Media Tube H $35.00 Filter media tube Nox/Sox Filter Clips (2 pcs) for refillable tube G $15.00 Fixing clips (2) for media tube

2 Power Cord 120V G $25.00 Power cord 12V Vehicle Power Source H $45.00 Car charger 1 Foot SB Probe Complete with Soot Test Feature H $ Probe with soot test feature 1 Foot SB Probe Complete without Soot Test Feature H $ Probe pipe without soot test feature 1 Foot SB Probe Pipe H $ Probe pipe and thermocouple s/n Probe Shield G $69.00 To protect handle from high temp 10mm SB Probe Cone H $ Foot SB Probe Pipe H $ Foot SB Probe Pipe H $ ft SB Probe Complete H $ Probe cone for probe pipe s/n Probe pipe and thermocouple s/n Probe pipe and thermocouple s/n Probe with pistol grip, probe pipe and probe cone 5 Foot SB Probe Complete H $1, Probe with pistol grip, probe pipe and probe cone SB Pistol Grip Handle with Soot Test Feature SB Pistol Grip Handle without Soot Test Feature H $ H $ Pistol grip handle with soot test feature Pistol grip handle without soot test feature

3 15 Foot SB Sample Line H $ Sample line T-Gas Probe w/ Cable H $ Probe with 30ft cable for s/n 1739 and above Tail Pipe Probe Assembly H $ Tail pipe probe with sample line 30 Foot SB Sample Line H $ Sample Line Heated Sample Line w/ 2ft stainless steel probe (per Ft.) 15 ft. & 30 ft. lines available in stock H $65.00 PER FOOT Heated sample line 5 Pin T-Gas Dummy Plug G $29.00 Dummy connector 9mm Male Gas Adapter G $29.00 Gas adapter 8 mm Male Draft Adapter G $29.00 Draft adapter 2m (6 ft) Mini USB Cable G $19.00 Mini USB cable Pitot Tube (12 inches) H $ For stack gas velocity Main Pump 9V H $ Main pump

4 UD100 Bluetooth Adapter with antenna H $79.00 Bluetooth adapter with antenna ScanTemp Gun H $ Infrared temperature gun with laser pointer On Demand Regulator w/ gauge (specify CGA 180 or 660) On Demand Regulator w/ gauge (specify CGA 180 or 660) H (CGA 660) H (CGA 180) $ On-demand regulator $ On-demand regulator Calibration Hose G $35.00 Hose attachment with gas connector Probe Tip Cal Attachment G $30.00 Probe tip attachment serial# 1739 & above Antenna G $19.00 Antenna for J2KNpro Industrial base Stainless Steel Probe Tip Filter G $ Probe tip filter 1 Amp Fuse G $10.00 Fuse located under power supply Peristaltic Pump H $ Condensate removal pump Peristaltic Pump Housing H $ Housing for condensate removal pump Peristaltic Tubing / Ft G $7.00 Tubing sold by the foot

5 Power Supply Board H $ Power supply board for J2KN Series On-Board Thermal Printer Assembly H $ Printer assembly Peltier Cooler H $ Peltier cooler with water trap assembly Mini Filter Plate H $ Filter plate Large Filter Plate H $ Filter plate Reed Switch G $29.00 Reed switch located under cal magnet sticker 9mm O-Ring for Gas Adapter (71353) 8 mm O-Ring for Draft Adapter (71354) O-Ring for Water Trap Bowl G $3.00 O-Ring for Gas Adapter G $3.00 O-Ring for draft adapter G $3.00 O-Ring for water trap bowl Peltier Cooler Mount H $30.00 Cooler mount J2KNpro Industrial Carry Case J2KNpro Industrial Under Case J2KNpro Easy Carry Case J2KNpro Easy Under Case H $ J2KNpro Industrial carrying case H $ J2KNpro Industrial under case H $ J2KNpro Easy carrying case H $ J2KNpro Easy under case

6 Carry Case Shoulder Strap H $49.00 Shoulder strap Water Trap Bowl H $55.00 Plastic bowl 2 GB SD Card G $15.00 For data logging Black Silicone Tubing G $8.00 Tubing for water trap and calibration hose Ambient Air Temperature Stick G $75.00 Temperature stick SENSORS O H $ OO/105 CO (Low) H $ A5F CO (High) H $ MF CO (Low) W/H H $1, SF-4E-S (MEM) with headboard NO H $ NF

7 NO H $ ND SO H $ SF CxHy H $ Pellistor type ** WHEN ORDERING SENSORS, YOU MUST PHYSICALLY IDENTIFY THE SENSOR CODE LOCATED ON THE LABEL ON THE OUTSIDE OF THE SENSOR** CALIBRATION GAS Standard PAL 45 Cal Gas Kit (630L at 2000psi) H $1, PAL45 Cal Gas Kit Contains: -CO/NO Mix (1000PPM/100PPM) -NO2 (80PPM) -DEMAND REGULATOR CGA 660 -CALIBRATION HOSE ATTACHMENT Standard A5 Cal Gas Kit 2000psi) H $1, A5 Cal Gas Kit Contains: -CO/NO Mix (1000PPM/100PPM) -NO2 (80PPM) -DEMAND REGULATOR CGA 180 -CALIBRATION HOSE ATTACHMENT -RUGGED TRAVELING CASE MEM Cal Gas Kit for OCVNX 2000psi) H $2, FOR MEM SENSOR (RBR75314) MEM Sensor Cal Gas Kit Contains: -CO/H2 Mix (400PPM/400PPM) -2%O2 -NO 450PPM GAS (700L) -NO2 80PPM GAS (700L) -ON DEMAND REGULATOR CGA 660 -CALIBRATION HOSE ATTACHEMENT