TRUCK & TRAILER SUSPENSION PARTS CEDAR RAPIDS th Ave. S.W.
|
|
- Mabel Morris
- 6 years ago
- Views:
Transcription
1 38 Order NLINE Midwest Wheel is Your Source for... CATALOG NUMBER TRUCK & TRAILER SUSPENSION PARTS TRUCK MIDWESTWHEEL.COM IOWA HAULMAAX DES MOINES 1436 E. Ovid Ave. office fax parts fax parts TRUCK PARTS SUPER STORE TM CEDAR RAPIDS th Ave. S.W. main fax parts fax parts DAVENPORT 8502 Northwest Blvd. main fax parts CLEAR LAKE 840 Hwy. 18 W. main fax parts fax parts SIOUX CITY 1819 E. 4th St. main fax parts VANTRAAX HAULMAAX / HN SERIES RT & RTE RS HAS / MAX AIR PRIMAAX AIRTEK TRAILER INTRAAX VANTRAAX HT SERIES August 2017 (38Hendrickson Truck and Trailer Suspension) MISSOURI KANSAS CITY 5801 E. Front St. main fax parts
2 TRUCK SUSPENSION PROGRAM HAULMAAX / HN SERIES APPLICATION: VOCATIONAL Torque Rod Torque Rod Bushing Auxiliary Spring Progressive Spring Tie Bar Transverse Rod Auxiliary/ Progressive Spring & Shims Bolster Spring Wear Plate Saddle Assembly Rebound Strap HAULMAAX Bolster Spring Kit 2 Haulmaax P/N HTK Complete Bolster Spring Kit Haulmaax P/N HTK Parts & Kits for Haulmaax & HN Series Suspensions End Bushing Equalizing Beam Bolster Spring HN Series P/N HTK L HN SERIES Qty. per suspension Bolster Springs Haulmaax Tie-Bar Bolster Spring Kit (Includes 2 springs & 1 wear plate) HTK Complete Haulmaax Tie-Bar Bolster Spring Kit (Includes 2 springs, 1 wear plate & HTK Auxiliary Spring) HN Series Bolster Spring (2 springs) HTK L 2 Auxiliary/Progressive Springs Progressive Load Spring Service Kit (One Side) HTK Auxiliary Load Spring Service Kit (One Side) HTK Bar Pin End Bushing Kit Shim Type (1 wheel end) HTK L 4 Rotating (1 wheel end) HTK L 4 Equalizing Beam Rotatable bar pin end bushing (HTK L) for quick & easy install HMX460 54" Beam Assy w/ Shock Bracket HTK HMX460 54" Beam Assy w/o Shock Bracket HTK HN462 54" Beam Assy HTK HN402 52" Beam Assy HTK Saddle Assembly HMX400 HTK HMX460 HTK Shock Absorbers (Not Pictured) 16.5" Haulmaax HTK "/18.5" Haulmaax HTK HN Series Shock HTK Torque Rods 2 Piece Torque Rod Kit HTK Taper Bushing HTK H 2 Parts Rebound Strap HTK Wear Plate HTK
3 RT & RTE APPLICATION: VOCATIONAL Spring Eye Bushing Spring Hanger Torque Rod Bushing Spring Assembly Torque Rod Saddle Assembly End Bushing Center Bushing Equalizing Beam Parts & Kits for RT & RTE Suspensions Cross-tube Qty. per suspension Rubber End Bushing & Adapter Service Kits 440 Kit (1 Wheel End) HTK L Kit (1 Wheel End) HTK L Kit (1 Wheel End) HTK L 4 Bar Pin End Bushing Service Kit Non shim (1 Wheel End) HTK L 4 Shim Type (1 Wheel End) HTK L 4 Rotating (1 Wheel End) HTK L 4 Center Bushings R340 Rubber HTK L 2 R340 Rubber w/ Loose End Plug HTK L 2 R380 Rubber HTK L 2 R380 Rubber w/ Loose End Plug HTK L 2 R400 Rubber HTK L 2 R400 Rubber w/ Loose End Plug HTK L 2 R520 Bronze Service Kit (2 Beams) HTK L 2 R520 Rubber HTK L 2 Cross Tube R " HTK L 1 R " HTK L 1 Spring Assembly RT400 AUT RT400/403 AUT50-291OE 2 RT440 AUT RT480 AUT50-301OE 2 RTE400 AUT RTE480 AUT Torque Rods Tube End, Female, 5/8" Bushing & Hole Dia. HTK H 2 Spacer End, Male, 27" Straddle, 5/8" Bushing & Hole Dia. HTK H 2 Spacer End, Male, 27" Straddle, 3X1 1/4" Taper HTK H 2 Spacer End, Male, 27" Straddle, 2 X 1 1/8" Taper HTK H 2 Torque Rod Bushings (2.5" Wide) HTK L 2 (2.75" Wide) HTK L 2 (3" Taper) HTK L 2 3
4 RS APPLICATION: VOCATIONAL Parts & Kits for RS Suspensions End Bushing 440 Kit (1 Wheel End) HTK L 4 & Adapter 520 Kit (1 Wheel End) HTK L 4 Kits 340 Kit (1 Wheel End) HTK L 4 Bar Pin End Bushing Kits Non Shim (1 Wheel End) HTK L 4 Shim Type (1 Wheel End) HTK L 4 Rotating (1 Wheel End) HTK L 4 Center R340 Rubber HTK L 2 Bushings R340 Rubber w/ Loose HTK L 2 End Plug R380 Rubber HTK L 2 R380 Rubber w/ Loose HTK L 2 End Plug R400 Rubber HTK L 2 R400 Rubber w/ Loose HTK L 2 End Plug R520 Bronze Service Kit HTK L 1 (2 Beams) R520 Rubber HTK L 2 Cross Tube R " HTK L 1 R " HTK L 1 Load RS On & Off Hwy HTK Cushions RS-460 Thru On & HTK Off Hwy RS-460 Thru 520 Heavy Duty HTK Torque Rod Frame Hanger Load Cushions Saddle Assembly Center Bushing Description P/N Qty Torque Tube End, Female, 5/8" Bushing & Hole Dia. HTK H 2 Rods Spacer End, Male, 27" Straddle, 5/8" Bushing & Hole Dia. HTK H 2 Spacer End, Male, 27" Straddle, 3X1 1/4" Taper HTK H 2 Spacer End, Male, 27" Straddle, 2 X 1 1/8" Taper HTK H 2 Torque Rod Bushings Equalizing Beam Torque Rod Bushing Cross-tube End Bushing Vertical Drive Bushing (2.5" Wide) HTK L 2 (2.75" Wide) HTK L 2 (3" Taper) HTK L 2 Qty. per suspension 4 PRIMAAX APPLICATION: VOCATIONAL Parts & Kits for PRIMAAX Suspensions Description P/N Qty Air Spring PAX 460: HTK L 2 Ride Height Shock PAX 460, 8.5"-10" MO Absorber Ride Height Height w/ Dump - PAX 460, HTK Control Valves 12 1/2", 14 3/8", 15 1/2" Ride Heights Universal w/ Dump HTK (Valve Only) Universal (No Dump, Valve Only) TN VS Pivot Bushing & Quik-Align U-Bolts Torque Rod & Bushing Frame Hanger Transverse Rod & Bushing Support Beam Height Control Valve D-Pin Bushing Shock Absorber D-Pin Service Parts Bushing - PAX 460, ", 12 1/2", 14 3/8", 15 1/2" Ride Height Air Spring HTK Bushing, PAX 520, 10" Ride Height HTK Single Service Kit For PAX 520, 10" Ride Height HTK Quik Align Bushings PAX 460: 8.5"-10", 12 1/2, 14 3/8", 15 1/2" Ride Height, PAX " Ride Height HTK Pivot Bushings, PAX 520, 10" Ride Height (1 Axle Only) HTK Air Spring Cross Brace Qty. per suspension
5 HAS / MAX AIR APPLICATION: VOCATIONAL 46K+, ON HIGHWAY 40K Torque Rod Bushing Main Support Member Z Bar Transverse Torque Rod Height Control Valve Spring Hanger Slipper Pad Parts & Kits for HAS & MAX AIR Suspensions Torque Rod Spring Seat Torque Rod HTK L 4 Bushing Air Spring Assy HA (All Except Ford Or Mack) GZ 1R HA (Ford) GZ 1R HA (Mack) GZ 1R HAS - 400/402/460/190/210/230 GZ 1R HAS - Low Ride Height Model GZ 1R (400L/402L/150L/190L/210L/230L) Air Spring Max Air AL 405 HTK Height Control Assy -HAS (Mack Max Air) HTK Valves Assy w/ Dump - HAS HTK Assy (No Dump) - HA, HAS HTK Universal w/ Dump (Valve Only) HTK Universal (No Dump, Valve Only) TN VS U-Bolts Shock Absorber HAS - Standard MO HAS - Volvo (Single & Tandem) HTK HAS - High Torque HTK Max Air Shock HTK Main Support Member - Z Bar Air Spring Shock Absorber HA HTK HAS (46K) HTK HAS (40K) HTK Max Air (Left) HTK Max Air (Right) HTK Qty. per suspension AIRTEK APPLICATION: FRONT STEER, ON HIGHWAY ONLY Air Spring Shock Absorber Parts & Kits for AIRTEK Suspensions Kingpin Bushing & Axle Set, All Makes HTK Bearing Service Kit Air Springs Freightliner HTK L 2 Volvo K/14.6K HTK L 2 Volvo K HTK L 2 International HTK L 2 Height Control Valves Freightliner (RH) HTK International (LH) HTK Volvo (Single, RH) HTK Shock Absorber Freightliner HTK L 2 Volvo HTK L 2 International (Day Cab) HTK L 2 International (Sleeper) HTK L 2 Leaf Spring Century Class S/T Columbia 1350, Western Star (Set Back) Replaces HTK STEERTEK Axle Qty. per suspension Height Control Valve King Pin Convolute Leaf Spring Unitized hub and ABS ready Two-Piece Knuckle 5
6 TRAILER SUSPENSION PROGRAM INTRAAX ECCENTRIC ALIGNMENT COLLAR FRAME BRACKETS BUSHING TUBE SPACER CONCENTRIC ALIGNMENT COLLAR FRAME BRACKET WITH UPPER SHOCK MOUNT SHOCK ABSORBER AIR SPRING MOUNT KIT AIR SPRING PIVOT CONNECTION HTRAAX (AXLE/BEAM WELDMENT) 6 S-CAM Universal Intraax Parts CAM TUBE KIT Description P/N OE Ref. Per Axle ALIGNMENT COLLARS Eccentric alignment collar (outer), Pivot hole is offset from the center of collar TN S Concentric alignment collar (inner), Pivot hole is in center of collar TN S AIR SPRING MOUNTING KIT 13.5", 14", 18" and 19" RH TN S-22619/2 2 15" RH TN S-22630/2 2 16" RH TN S-22631/2 2 17" RH TN S-22632/2 2 AIR SPRING SPACER Plastic, 11/8" Thick spacer, 15" RH TN S Plastic, 17/8" Thick spacer, 16" RH TN S Plastic, 31/8" Thick spacer, 17" RH TN S S-CAM Left, for 16.5" Brakes EU E S L 1 Right, for 16.5" Brakes EU E S R 1 CAM TUBE KIT For 16.5" Brakes - includes cam tube, support brackets, screws, nuts, TN S washers, rings. For models shipped after April 2001 HEIGHT CONTROL VALVE No Dump TN VS Integral Dump TN VS BOLTED LINKAGE ASSEMBLY TN S AXLE / BEAM WELDMENT Call for more information TN HTRAAX.XXXX - FRAME BRACKET Call for more information Various - AAT 23K, 25K, 30K Top Mount Replacement Parts (Wide Bushing) Description P/N OE Ref. Per Axle QUIK-ALIGN PIVOT BOLT KIT Includes 10" shear-type bolt, nut and washers TN S QUIK-ALIGN PIVOT BUSHING KIT Standard, Includes bushing, pivot bolt kit, bushing tube spacers & lube TN S BUSHING TOOL Required to correctly rebush the suspension. TN S BUSHING TUBE SPACERS (4) required per axle TN S AIR SPRING AAT 23K 13.5" to 19" RH GZ 1R S AAT 23K 12" to 13" RH TN S AAT 25K 13.5" to 19" RH GZ 1R S All AAT 30K Models GZ 1R S SHOCK ABSORBER AAT 23K and 25K models, standard or limited rebound MO S-23566, S All AAT 30K models MO S
7 INTRAAX, continued AANT 23K Top Mount Replacement Parts (Narrow Bushing) AIR SPRING Standard Pressure 12" to 13" RH TN S Standard Pressure 13.5" to 19" RH GZ 1R S Low Pressure 13.5" to 19" RH GZ 1R S QUIK-ALIGN PIVOT BOLT KIT Includes 7" shear-type bolt, nut and washers TN S BUSHING TUBE SPACERS TN S TRI-FUNCTIONAL BUSHING KIT Includes (2) bushings, pivot bolt kit, bushing tube spacers & lube TN S BUSHING TOOL Required to correctly rebush the suspension. TN S SHOCK ABSORBER 13.5" to 19" RH MO S " to 17.5" high control models, 13.5" to 19" limited rebound MO S " RH; Standard travel, high control models MO S " to 19" RH; Extended service with high damping MO S " RH; Extended service with high damping MO S " RH, Extended service with high damping, high control models MO S VANTRAAX SEE INTRAAX FOR SUSPENSION REPLACEMENT PARTS OPPORTUNITIES BODY RAIL CLIP BODY RAIL QUIK-DRAW SLIDER BOX ASSEMBLY (AMBOX) Universal Slider Box Parts AFTERMARKET SLIDER BOX REPLACEMENT Call for more information TN AMBOX.### 1 QUIK-DRAW PNEUMATIC PIN-PULL MECHANISM Front Linear Actuator w/ Fittings, 48" & 54" box, Order Pin Extension for 54" box TN S Reag Linear Actuator w/ Fittings, 48 & 54 box, Order Pin Extension for 54 box TN S QUIK-DRAW VALVE Three-way Auto Reset Valve TN VS Three-way Auto Reset Valve Assembly with Fittings TN VS QUIK-DRAW VALVE KNOB with SET SCREW TN VS HANDLE ASSEMBLY Handle and grip assembly TN S BODY RAIL CLIP 3.8" clip height, Use with 6" hole centers and 1.375" locking pin TN S " clip height, Use with 4" hole centers and 1.625" (1-5/8") locking pin TN S SLIDER WEAR PAD KIT Includes (1) slider wear pad and (8) screws TN S
8 VANTRAAX, continued Universal Vantraax Parts Description P/N OE Ref. Per Axle ALIGNMENT COLLARS Eccentric alignment collar (outer), Pivot hole is offset from the center of collar TN S Concentric alignment collar (inner), Pivot hole is in center of collar TN S S-CAM Left, for 16.5" Brakes EU E S L 1 Right, for 16.5" Brakes EU E S R 1 CAM TUBE KIT For 16.5" Brakes - includes cam tube, support brackets, screws, nuts, TN S washers, rings. For models shipped after April 2001 HEIGHT CONTROL VALVE No Dump TN VS Integral Dump TN VS BOLTED LINKAGE ASSEMBLY TN S HKANT 40K / HKA180 Replacement Parts (Narrow Bushing) AIR SPRING 16" RH and above (Shipped prior to January 2008) GZ 1R S " RH and above GZ 1R S (Shipped after January 2008) TN S AIR SPRING MOUNTING KIT (per air spring) WITH 2" WELD-ON AIR SPRING PEDESTAL AIR SPRING MOUNTING KIT (per air spring) WITH CAST AIR SPRING PEDESTAL AIR SPRING SPACER WITH 2" WELD-ON AIR SPRING PEDESTAL 15" and 19" RH TN S-22631/ " RH TN S-22632/2 4 16", 16.5" and 17" RH TN S-22619/2 4 14"-18" RH TN S-22619/2 4 19" RH TN S-22630/2 4 14" and 16.5" RH, 3/4" thick spacer TN S " RH, Requires both the 3/4" and 1-7/8" spacer TN S / TN S / 4 15" and 18" RH, 1-7/8" thick spacer TN S " RH, 1-1/8" thick spacer TN S " RH, 3-1/8" thick spacer TN S " RH, 1-1/8" thick spacer TN S AIR SPRING SPACER WITH CAST AIR SPRING PEDESTAL SHOCK ABSORBER MO S TRI-FUNCTIONAL PIVOT BUSHING KIT Includes (2) bushings, (2) pivot bolt kits, (4) bushing TN S tube spacers and lubricant pack BUSHING TOOL Required to correctly rebush the suspension. TN S QUIK-ALIGN PIVOT BOLT KIT Contains 7" bolt, nut and hardened washers TN S HKANT 46K Replacement Parts (Narrow Bushing / Tapered Beam Model) 8 AIR SPRING 16" RH and above GZ 1R S " RH and above GZ 1R S Below 16" RH GZ 1R S AIR SPRING MOUNTING KIT (per air 14"-18" RH TN S-22619/2 4 spring) WITH CAST AIR SPRING PEDESTAL 19" RH TN S-22630/2 4 AIR SPRING SPACER 1-1/8" thick spacer, 19" RH TN S SHOCK ABSORBER Standard Duty MO S TRI-FUNCTIONAL PIVOT BUSHING KIT* Includes (2) bushings, (2) pivot bolt kits, (4) bushing tube spacers TN S and lubricant pack BUSHING TOOL Required to correctly rebush the suspension. TN S QUIK-ALIGN PIVOT BOLT KIT Contains 7" bolt, nut and hardened washers TN S BUSHING TUBE SPACER TN S
9 VANTRAAX, continued HKAT 46K / HKA200 Replacement Parts (Wide Bushing / Straight Beam Model) AIR SPRING 16" - 19" RH GZ 1R S " RH and above GZ 1R S " - 15" RH GZ 1R S AIR SPRING MOUNTING KIT (per air spring) - When model includes a 2", weld-on pedestal under the air spring. AIR SPRING SPACER - When model includes a 2", weld-on pedestal under the air spring. 16" RH TN S-22619/2 4 15" and 18" RH TN S-22631/2 4 17" RH TN S-22630/2 4 19" RH TN S-22632/2 4 14" and 16.5" RH, 3/4" spacer TN S " and 18" RH, 1-7/8" spacer TN S " RH, 1-1/8" spacer TN S " RH, 3-1/8" spacer TN S SHOCK ABSORBER MO S TRI-FUNCTIONAL PIVOT BUSHING KIT Wide Bushing, Includes (1) bushings, (1) pivot bolt kits, (2) bushing TN S tube spacers and lubricant pack BUSHING TOOL Required to correctly rebush the suspension. TN S QUIK-ALIGN PIVOT BOLT KIT Contains 10" bolt, nut and hardened washers TN S BUSHING TUBE SPACER TN S HKAT 50K / HKA250 Replacement Parts (Wide Bushing) AIR SPRING 14"-15" RH GZ 1R S "-19" RH FI W S AIR SPRING MOUNTING KIT (per air spring) - When model includes a 2", weld-on pedestal under the air spring. AIR SPRING SPACER - When model includes a 2", weld-on pedestal under the air spring. 16" RH TN S-22619/2 4 15" and 18" RH TN S-22631/2 4 17" RH TN S-22630/2 4 19" RH TN S-22632/2 4 14" and 16.5" RH, 3/4" spacer TN S " and 18" RH, 1-7/8" spacer TN S " RH, 1-1/8" spacer TN S " RH, 3-1/8" spacer TN S SHOCK ABSORBER MO S TRI-FUNCTIONAL PIVOT BUSHING KIT Wide bushing, Includes (1) bushing, (1) pivot bolt kit, (2) bushing tube TN S spacers and lubricant pack BUSHING TOOL Required to correctly rebush the suspension. TN S QUIK-ALIGN PIVOT BOLT KIT Contains 10" bolt, nut and hardened washers (alignment collars not included) TN S BUSHING TUBE SPACER TN S BODY RAIL CLIP BODY RAIL QUIK-DRAW SLIDER BOX ASSEMBLY (AMBOX) 9
10 HT SERIES HT Universal Air Accessories UNIVERSAL HEIGHT CONTROL Fits all models. Includes height control valve, exhaust line fittings and spacer bracket, No dump TN VS-227 1** VALVE Integral dump TN VS-228 1** UNIVERSAL LINKAGE ASSEMBLY Includes linkage assembly and hardware TN S ** DUMP VALVE Includes dump valve and fittings TN VS ** PRESSURE PROTECTION VALVE Includes valve only TN VS ** ** Quantities for air control components are per trailer. HT Universal on all HT230T, HT250T, HT250U, HT300T, HT300U (Wide Bushing) ALIGNMENT COLLARS Welded Alignment, Collars are welded to frame bracket TN S Eccentric, QUIK-ALIGN (outer), Alignment hole is off center TN S Concentric, QUIK-ALIGN (inner), Alignment hole is centered TN S TRI-FUNCTIONAL II Welded Alignment, Includes bushing, bushing tube spacers,cap screw, prevailing torque TN S BUSHING KIT hex nut, liner and lube QUIK-ALIGN, Includes bushing, bushing tube spacers, round head bolt, prevailing torque TN S hex nut, hardened washers and lube BUSHING TOOL Required to correctly rebush the suspension. TN S BUSHING TUBE SPACER All models TN S PIVOT BOLT KIT Welded Alignment, Includes cap screw, prevailing torque hex nut and liner TN S QUIK-ALIGN, Includes round head bolt, hardened washers and prevailing torque hex nut TN S BEAM ASSEMBLY Call for more information TN HTRAAX.XXXX - FRAME BRACKET Call for more information Various - FRAME BRACKET BUSHING TUBE SPACER SHOCK ABSORBER AIR SPRING SHOCK MOUNT HT230T PIVOT BOLT KIT AIR SPRING ALIGNMENT COLLAR BEAM ASSEMBLY 10 HT230T TOP-MOUNT Replacement Parts (Wide Bushing) SHOCK All models except below MO S S ABSORBER , , , , TA15-517, TA15-520, TA MO S , , , , , , TA14-007, MO S TA15-007, TA16-007, TA17-007, TB14-033, TB , , TA MO S TA MO / MO B TA15-522, TA MO S AIR SPRING All models GZ 1R S / S
11 HT SERIES, continued FRAME BRACKET SHOCK ABSORBER HT250T AIR SPRING PIVOT BOLT KIT ALIGNMENT COLLAR BEAM ASSEMBLY HT250T Top Mount Replacement Parts (Wide Bushing) SHOCK ABSORBER All models MO S AIR SPRING Fits all models unless shown below GZ 1R S Fits T , TB GZ 1R S HT250U Underslung Replacement Parts (Wide Bushing) SHOCK ABSORBER Fits all models unless shown below MO S / S Fits U , U MO S Fits U-9-020, U-9-021, U-9-023, U , U , UB9-022, UB MO / MO S Fits U , U , U , U-9-517, U , U , MO S UB ,UB Fits U , U MO S SHOCK STRAP KITS Use with and TN S AIR SPRING All models except below GZ 1R S Fits U , U GZ 1R S Fits U-9-006, U-9-028, U-9-029, U , U , U GZ 1R S Fits U-9-010, UB9-010 GZ 1R S Fits U , U , U GZ 1R S Fits U-9-020, U-9-021, U-9-023, U , U , UB9-022, UB GZ 1R S Fits U , U GZ 1R S NOTE: Identification tag can be found on the front of the roadside frame bracket or the inside of the curbside beam. HT300T TOP MOUNT Replacement Parts (Wide Bushing) SHOCK ABSORBER All models except below MO S , , , , , , TB19-007, TB MO S , , , MO S TB MO S AIR SPRING All models GZ 1R S
12 HT SERIES, continued HT300U UNDERSLUNG Replacement Parts (Wide Bushing) SHOCK U , U , U-9-001, U-9-005, U-9-020, U-9-021, U-9-022, U-9-024, U-9-501, U-9-701, MO S ABSORBER U , U , U , U , U , U , U , U , U , U , U , U , U , U , U , U , UB9-022, UB U , U-9-011, U-9-519, U , U , U , U ,U MO S AIR SPRING U , U , U , U-9-001, U-9-005, U-9-011, U-9-020, U-9-021, U-9-024, U-9-501, GZ 1R S U-9-519, U-9-701, U , U , U , U , U , U , U , U , U , U , U , U , U , U U-9-022, U , U , UB9-022 TN S AIR SPRING MOUNT SHOCK ABSORBER FRAME BRACKET WITH UPPER SHOCK MOUNT HT250US LOWER SHOCK MOUNT AIR SPRING PIVOT BOLT KIT HT250US UNDERSLUNG Replacement Parts (Narrow Bushing) BEAM ASSEMBLY TRI-FUNCTIONAL II QUIK-ALIGN, Includes bushing, bushing tube spacers, round head bolt, prevailing TN S BUSHING KIT torque hex nut, hardened washers and lube BUSHING TOOL Required to correctly rebush the suspension TN S BUSHING TUBE SPACER All models TN S PIVOT BOLT KIT QUIK-ALIGN, Includes round head bolt, hardened washers and prevailing torque hex nut TN S SHOCK ABSORBERS Standard Shock Mount - Standard Travel, 3.5" to 4" RH MO S Standard Shock Mount - Standard Travel, 5.5" to 6.5" RH MO S Standard Shock Mount - Standard Travel, 7.5" to 14" RH MO S Standard Shock Mount - Standard Travel - High Damping, 5.5" to 6.5" RH TN S Standard Shock Mount - Extended Rebound, 6.5" RH MO S Standard Shock Mount - Extended Rebound - High Damping, 6.5" RH MO S Remote Shock Mount*** - Standard Travel, 12" to 14" RH MO S Remote Shock Mount*** - Standard Travel - High Damping, 5.5" to 6.5" RH TN S Remote Shock Mount*** - Extended Rebound, 6.5" to 9" MO S Remote Shock Mount*** - Extended Rebound - High Damping, 6.5" to 9" RH MO S AIR SPRING Standard Mount - 4" RH GZ 1R S Standard Mount - 3.5" and 4" RH, High Pressure GZ 1R S Standard Mount - 5.5" to 14" RH GZ 1R S Rotated Mount to 14 RH GZ 1R S Standard Mount - 6.5" RH, High Pressure, Short Bellows TN S Standard Mount - 7.5" to 14" RH, High Pressure GZ 1R S Rotated Mount to 14 RH, High Pressure GZ 1R S *** Clevis not included and not needed for remote shock mount
PARTS LIST VANTRAAX HKANT 40K/ HKA180 LIT NO: L649
PARTS LIST VANTRAAX HKANT 40K/ HKA180 LIT NO: L649 DATE: December 2008 REVISION: B VANTRAAX HKANT 40K / HKA180 PARTS LIST SLIDER BOX ASSEMBLY 1 For box assembly replacement, contact a customer service
More informationPARTS LIST VANTRAAX HKANT 40K/ HKA180. LIT NO: L649 DATE: July 2015 REVISION: D
PARTS LIST VANTRAAX HKANT 40K/ HKA180 LIT NO: L649 DATE: July 2015 REVISION: D SLIDER BOX ASSEMBLY 1 13 For box assembly replacement, contact a customer service representative. 12 14 11 10 Units built
More informationCONTENTS. Height Control Valves 3. Air Springs 4. Shock Absorbers 4. Leaf Spring Assemblies 4. Tie Rods 6 REAR SUSPENSIONS.
CONTENTS FRONT SUSPENSIONS AND AXLE SYSTEMS Height Control Valves 3 Air Springs 4 Shock Absorbers 4 Leaf Spring Assemblies 4 Kingpin Bushings & Thrust Bearings 5 Tie Rods 6 Air Springs 7 Height Control
More informationPARTS LIST VANTRAAX HKAT 69K25. LIT NO: L1079 DATE: October 2016 REVISION: D
PARTS LIST VANTRAAX HKAT 69K25 LIT NO: L1079 DATE: October 2016 REVISION: D VANTRAAX HKAT 69K25 PARTS LIST SLIDER BOX ASSEMBLY 1 a a 13 12 11 14 10 Units built in Sept. 2012 and after SLIDER PINS Units
More informationPARTS LIST HT250U UNDERSLUNG LIT NO: L938
PARTS LIST HT250U UNDERSLUNG LIT NO: L938 DATE: February 2010 REVISION: B Picture shown may not resemble all models. 2b bracket with QUIK-ALIGN 2a bracket, welded alignment 1 2 QTY. FITS MODELS ITEM DESCRIPTION
More informationPARTS LIST VANTRAAX HRRNT 40K. LIT NO: L1083 DATE: January 2012
PARTS LIST VANTRAAX HRRNT 40K LIT NO: DATE: January 2012 DO DO NOT NOT W E L D W E L D DO W E L D VANTRAAX HRRNT 40K SLIDER BOX ASSEMBLY 1 6 8 21 22 3 NOT 2 VANTRAAX HRRNT 40K SLIDER BOX ASSEMBLY QTY.
More informationPARTS LIST HT300U UNDERSLUNG. LIT NO: L940 DATE: January 2018 REVISION: B
PARTS LIST HT300U UNDERSLUNG LIT NO: L940 DATE: January 2018 REVISION: B Picture shown may not resemble all models. Wingless, weld-on frame bracket, welded alignment 3 2 1 2 ITEM DESCRIPTION PART NO. QTY.
More informationPARTS LIST INTRAAX AANT 23K. LIT NO: L1057 DATE: April 2018 REVISION: F
PARTS LIST INTRAAX AANT 23K LIT NO: L1057 DATE: April 2018 REVISION: F SUSPENSION ASSEMBLIES Frame Bracket Assembly 2 12 11 10 8 1 13 Illustration 1 With cast, bolt-on 13 Manufactured Late August 2002
More informationPARTS LIST HT250US UNDERSLUNG. LIT NO: L582 DATE: February 2017 REVISION: E
PARTS LIST HT250US UNDERSLUNG LIT NO: L582 DATE: February 2017 REVISION: E Picture shown may not resemble all models. 3 2a 8 6 7b 8 5 8 6 7a Wingless, weld-on frame bracket with QUIK-ALIGN 9a 8 5 1 9a
More informationPARTS LIST INTRAAX AAT 23K, 25K, 30K. LIT NO: L405 DATE: January 2018 REVISION: M
PARTS LIST INTRAAX AAT 23K, 25K, 30K LIT NO: L405 DATE: January 2018 REVISION: M INTRAAX AAT 23K, 25K, 30K PARTS LIST 16 5 6 8 15 15 11 13 16 8 Pedestal Components Detail (Call Hendrickson for assistance)
More informationPARTS LIST AAT230/250 INTRAAX TRAILER SUSPENSION SYSTEM
PARTS LIST AAT30/0 INTRAAX TRAILER SUSPENSION SYSTEM LIT NO: 974-0 DATE: March 06 REVISION: A SECTION PAGE Introduction... Axle and Suspension Identification... 3 Axle ID Plate... 3 Suspension Assembly
More informationPARTS LIST AANT230 INTRAAX TRAILER SUSPENSION SYSTEM
PARTS LIST AANT230 INTRAAX TRAILER SUSPENSION SYSTEM LIT NO: 974-2 DATE: July 206 REVISION: C SECTION PAGE Introduction... 2 Axle and Suspension Identification... 3 Axle ID Plate... 3 Suspension Assembly
More informationPARTS LIST INTRAAX AAEDL. LIT NO: L1058 DATE: June 2016 REVISION: B
PARTS LIST INTRAAX AAEDL LIT NO: L1058 DATE: June 2016 REVISION: B 5 6 8 4 8 2 9 7 Bolt-on C-Channel Wingless, weld-on frame bracket with QUIK-ALIGN 11 13 2 12 10 1 2 ITEM DESCRIPTION PART NO. QTY. NOTE
More informationHAULMAAX 400/460 Rear Suspension
Rear Suspension LIT NO: SP-171 DATE: July 2015 REVISION: I CONTENTS DESCRIPTION PAGE HMX 400/460... 2 Inboard Frame Bracket.... 4 Outboard Frame Bracket.... 5 DESCRIPTION PAGE Aftermarket Service Kits...
More informationPARTS LIST INTRAAX AAT 23K, 25K, 30K LIT NO: L405
PARTS LIST INTRAAX AAT 23K, 25K, 30K LIT NO: L405 DATE: December 2008 REVISION: F 2b 2a Used on 25K and 30K only 1 2 ITEM DESCRIPTION PART NO. PER AXLE NOTE 1 AXLE/BEAM WELDMENT HTRAAX.XX Contact Hendrickson
More informationEast Manufacturing Corporation 1871 State Route 44 * P O Box 277 Randolph, Ohio Toll Free (800) Fax (330)
East Manufacturing Corporation 87 State Route * P O Box 77 Randolph, Ohio 65 Toll Free (800) 36-085 Fax (330) 35-835 Table of Contents Item Hendrickson T-5 / T7 / T0 Hendrickson HT-30- / 6 Hendrickson
More informationHAULMAAX 40K 46K Rear Suspension
Rear Suspension LIT NO: SP-171 DATE: February 2017 REVISION: K CONTENTS DESCRIPTION Page Parts List HAULMAAX 40K 46K.... 2 Selection Guide Outboard Frame Bracket... 5 Inboard Frame Bracket.... 5 DESCRIPTION
More informationPARTS LIST HT250US LIT NO: L582
PARTS LIST HT250US LIT NO: L582 DATE: September 2002 REVISION: A 3 2 4b 5 4a 6 5 7 6 7 1 7a 2 ITEM DESCRIPTION PART NO. QTY. NOTE Available in ride heights of 3.5", 4", 5.5", 6.5", 7.5", 9", 12", 14" 1
More informationPARTS LIST INTRAAX AAT 23K, 25K, 30K, AAEDT 30K AND AANT 23K
PARTS LIST INTRAAX AAT 23K, 25K, 30K, AAEDT 30K AND AANT 23K LIT NO: L405 DATE: January 2002 REVISION: E TABLE OF CONTENTS SUSPENSION AND AXLE COMPONENTS...........................................2, 4,
More informationPARTS LIST INTRAAX AANT230 ZMD TRAILER SUSPENSION SYSTEM. LIT NO: DATE: November 2018 REVISION: B
PARTS LIST INTRAAX AANT30 ZMD TRAILER SUSPENSION SYSTEM LIT NO: 97114-117 DATE: November 018 REVISION: B INTRAAX AANT30 ZMD TRAILER SUSPENSION SYSTEMS PARTS LIST TABLE OF CONTENTS INTRODUCTION 3 ABBREVIATIONS
More informationPARTS LIST EDT300 INTRAAX TRAILER SUSPENSION SYSTEM
PARTS LIST EDT00 INTRAAX TRAILER SUSPENSION SYSTEM LIT NO: 97- DATE: October 05 REVISION: A SECTION PAGE Introduction... Axle and Suspension Identification... Axle ID Plate... Suspension Assembly Number
More informationPARTS LIST INTRAAX AAL 23K / 25K / 30K. LIT NO: L1060 DATE: February 2018 REVISION: B
PARTS LIST INTRAAX AAL 3K / 5K / 30K LIT NO: L1060 DATE: February 018 REVISION: B 5 8 9 8 6 7 Wingless, weld-on frame bracket with QUIK-ALIGN Wingless, bolt-on frame bracket with QUIK-ALIGN 14 11 13 1
More informationMeritor CS9A Air Suspension
Meritor CSA Air Suspension Dim A Dim B 0 AM0SA Axle Assy c/w Bushed See Table Below Hanger Bracket Trailing Arms, Brake AM Shock Absorber Spiders & S Cams AM0 Shock Bolt - Upper AM Pivot Bushing AM00 Washer
More informationPARTS LIST SURELOK TABLE OF CONTENTS. LIT NO: L1055 DATE: October 2017 REVISION: E
PARTS LIST SURELOK LIT NO: L55 DATE: October 01 REVISION: E TABLE OF CONTENTS INTRAAX AAT K/5K AND AANT K SUSPENSIONS.... ULTRAA-K UTKNT 40K SLIDER SUSPENSION.... VANTRAAX HKANT 40K/46K AND HKA10 SLIDER
More informationPRIMAAX EX / PRIMAAX Rear Air Suspension for International Truck Vehicles
PRIMAAX EX / PRIMAAX Rear Air Suspension for International Truck Vehicles LIT NO: SP-233 DATE: December 2017 REVISION: C CONTENTS DESCRIPTION PAGE Technical Notes............................ 2 Selection
More informationRT / RTE Rear Suspension
RT / RTE Rear Suspension LIT NO: SP-168 DATE: January 2017 REVISION: F CONTENTS DESCRIPTION Parts Lists Page RT/RTE 34K 40K 46K.... 2 RT/RTE 48K 52K.... 4 RT 65K 70K Heavy-duty... 6 DESCRIPTION Selection
More informationPRIMAAX EX Rear Air Suspension for Caterpillar Vehicles Built PRIOR to 2/2016
PRIMAAX EX Rear Air Suspension for Caterpillar Vehicles Built PRIOR to 2/2016 LIT NO: SP-234 DATE: September 2017 REVISION: C CONTENTS Description Page Description Page Technical Notes....2 Selection Guide
More informationTECHNICAL PROCEDURE HENDRICKSON AIR-RIDE SUSPENSIONS
TECHNICAL PROCEDURE HENDRICKSON AIR-RIDE SUSPENSIONS SUBJECT: Ride Height Settings LIT NO: L388 DATE: November 2003 REVISION: D The tables in this publication list the recommended or designed ride heights
More informationAIRTEK Front System for Mack Vehicles
AIRTEK Front System for Mack Vehicles LIT NO: SP-180 DATE: March 015 REVISION: G AIRTEK with STEERTEK NXT Axle Vehicles built AFTER July 011 AIRTEK with STEERTEK Axle Vehicles built PRIOR to July 011 Vehicles
More informationLIFTABLE SUSPENSION GUIDE TRAILER COMMERCIAL VEHICLE SYSTEMS
LIFTABLE SUSPENSION GUIDE TRAILER COMMERCIAL VEHICLE SYSTEMS LIT NO: L801 DATE: January 2018 REVISION: D TABLE OF CONTENTS INTRODUCTION.... 2 GENERAL GUIDELINES FOR LIFTABLE APPLICATIONS.... 2 TERMINOLOGY...
More informationTruck Suspension Past Generation Products
Truck Suspension Past Generation Products LIT NO: SP-179 DATE: December 2012 REVISION: D CONTENTS PARTS LISTS PAGE AR 340...................................... 2 AR 380......................................
More informationPRIMAAX EX PRIMAAX Rear Air Suspension for Mack Vehicles
PRIMAAX EX PRIMAAX Rear Air Suspension for Mack Vehicles LIT NO: SP-231 DATE: August 2017 REVISION: E CONTENTS DESCRIPTION Parts Lists Page PRIMAAX EX with Drum Brakes.... 2 PRIMAAX EX with Air Disc Brakes....
More informationEqualizing Beam and Components
Equalizing Beam and Components LIT NO: 45745-147 DATE: September 2016 REVISION: D CONTENTS DESCRIPTION PAGE Introduction...2 and Forged/Cast Beams....3 Equalizing Beams with Bar Pin End Bushings AR2 R
More informationAIRTEK Front System for Volvo Vehicles
AIRTEK Front System for Volvo Vehicles LIT NO: SP-174 DATE: February 2017 REVISION: J CONTENTS Description Page Description Page Parts Lists AIRTEK with STEERTEK NXT Axle Vehicles built AFTER July 2011....
More informationMERITOR MTA SERIES TRAILER AIR SUSPENSION SYSTEMS PB-10108
MERITOR MTA SERIES TRAILER AIR SUSPENSION SYSTEMS PB-10108 TABLE OF CONTENTS MTA23T Explode and BOM...4 Build Your OEM MTA23T Suspension...6 Build Your Own MTA23T Suspension...8 MTA25T Explode and BOM...10
More informationIDENTIFICATION GUIDE TRAILER SUSPENSION AND AXLE SYSTEMS TABLE OF CONTENTS. LIT NO: L977 DATE: September 2017 REVISION: G
IDENTIFICATION GUIDE TRAILER SUSPENSION AND AXLE SYSTEMS LIT NO: L977 DATE: September 2017 REVISION: G TABLE OF CONTENTS HOW TO IDENTIFY A MODEL....2 WHERE TO FIND ID TAG ON HENDRICKSON AIR SUSPENSIONS....2
More informationRT/RTE Series RT/RTE-340/343/ 400/403/460/463 RT/RTE-480/ 503/520/523 HEAVY DUTY RT-650 LIT NO: SP-168
RT/RTE Series LIT NO: DATE: November 2004 REVISION: A RT/RTE-340/343/ 400/403/460/463 RT/RTE-480/ 503/520/523 HEAVY DUTY RT-650 RT/RTE -340/343/400/403/460/463 PARTS LIST 2 RT/RTE -340/343/400/403/460/463
More informationParts Manual NEWAY BUS & MOTORHOME SUSPENSION
Parts Manual NEWAY BUS & MOTORHOME SUSPENSION 9 9 6 7 0 6A 6 7 0 9 * XL-PS07PM-en-US Rev A HOLLAND (AND FORMER NEWAY) BUS & MOTORHOME SUSPENSION PARTS REFERENCE GUIDE TABLE OF CONTENTS Truck, Bus & Motorhome
More informationPRIMAAX. - MAAXimize durability - MAAXimize driver comfort - MAAXimize performance. Severe-Duty Vocational Air Suspension
PRIMAAX EX - MAAXimize durability - MAAXimize driver comfort - MAAXimize performance Severe-Duty Vocational Air Suspension To learn more about PRIMAAX EX, call 855.743.3733 or visit www.hendrickson-intl.com
More information49 AXLE CENTERS FOR 5 ROUND AXLES. Part FRONT HANGER STRADDLE MOUNT EQUALIZER BOLT 1-14 X 6-1/4
REYCO GRANNING MODEL 86/88 COMPONENTS 49 AXLE CENTERS FOR 5 ROUND AXLES Number Description 0046-20 FRONT HANGER STRADDLE MOUNT 12 00001-14 EQUALIZER BOLT 1-14 X 6-1/4 1 0084-00 FRONT HANGER UNDER MOUNT
More informationFREIGHTLINER
30 Order NLINE www.midwestwheel.com CATALOG NUMBER VEHICLE SPECIFIC Grilles Window Regulators & Cranks Interior & Exterior Door Handles Hood Latches, Springs, Cables & Straps Hood & Door Hardware Bumpers
More informationRT / RTE Rear Suspension
RT / RTE Rear Suspension LIT NO: SP-8 DATE: Septemer 2015 REVISION: E CONTENTS DESCRIPTION Parts Lists Page RT/RTE 340/343/400/403/460/463.... 2 RT/RTE 0/3/520/523... 4 RT 6/700 Heavy-duty.... 6 DESCRIPTION
More informationSOFTEK / AIRTEK Front Suspension System for FCCC Motorhome Chassis
SOFTEK / AIRTEK Front Suspension System for FCCC Motorhome Chassis LIT NO: SP- DATE: November REVISION: G CONTENTS DESCRIPTION PAGE DESCRIPTION PAGE SOFTEK with STEERTEK NXT Axle, K/0K/2K Capacity Vehicles
More informationPRIMAAX EX FIREMAAX EX/ PRIMAAX FIREMAAX Series Heavy-duty Rear Air Suspension
FIREMAAX EX PRIMAAX EX FIREMAAX EX/ PRIMAAX FIREMAAX Series Heavy-duty Rear Air Suspension PRIMAAX EX SUBJECT: Service Instructions LIT NO: 17730-238 DATE: December 2014 REVISION: E TABLE OF CONTENTS Section
More informationFlange Mount (Fl/mt) Flange mount hangers may be welded or bolted to the frame, or a combination of bolting and welding may be used.
240 Fabricated (H) HUTCHENS H9700 and CH9700 SUSPENSIONS All 9700 series suspensions are available with either fabricated or cast steel hangers and rockers. These hangers come in various styles. Straddle
More informationPRIMAAX EX FIREMAAX EX PRIMAAX FIREMAAX Series Heavy-duty Rear Air Suspension
FIREMAAX EX PRIMAAX EX FIREMAAX EX PRIMAAX FIREMAAX Series Heavy-duty Rear Air Suspension PRIMAAX EX SUBJECT: Service Instructions LIT NO: 17730-238 DATE: March 2018 REVISION: F TABLE OF CONTENTS Section
More informationAVE NW EDMONTON, AB T5W 1Z6
780-479-6600 6030-125 AVE NW EDMONTON, AB T5W 1Z6 ABS VALVES ABS SENSOR EXTENSION ABS SENSORS ALL SIZES ABS VALVE #S4721950330 ABS Valve & Brain AC COMPRESSORS & SWITCHES DENSO AC COMPRESSOR FRIGHTLINER
More informationPRIMAAX EX PRIMAAX Rear Air Suspension for Kenworth Vehicles
PRIMAAX EX PRIMAAX EX PRIMAAX Rear Air Suspension for Kenworth Vehicles SUBJECT: Service Instructions LIT NO: 17730-263 DATE: November 2014 REVISION: E TABLE OF CONTENTS Section 1 Introduction... 2 Section
More informationAnti-vibration Components
Parts for Trucks - Trailers & Light Duty Vehicles Anti-vibration Components Proven, reliable and always innovative. TRP provides aftermarket Anti-vibration parts for all brands of commercial equipment
More informationHAS Rear Air Suspension
HAS Rear Air Suspension LIT NO: SP-149 DATE: August 2016 REVISION: I CONTENTS DESCRIPTION Page Parts Lists HAS for Vehicles Equipped with Air Disc Brakes 21K 23K 40K 46K.... 2 HAS for Vehicles Equipped
More informationHUTCH SUSPENSION. Hutch H7700 / H9700 Suspension. Axle Attaching Parts. Underslung Suspension
HUTCH SUSPENSION Underslung Suspension Front Back Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 5a Fig. 5b Fig. 6 Fig. 7 Fig. 8 U-Bolts And Nuts On Page 53 Hutch H7700 / H9700 Suspension Fabricated Weld-On &
More informationContent. KEY Benefit Tech Tip Wear Item
- Page 1 - Content Suspensions 2 Air Suspension Inspection/Maintenance 3 Leaf Spring Inspection 4 Most Common & Preventable Failures 5 s 6 ATRO Free Rotation Design 11 ATRO Information Charts 12 Chalmers
More informationSTEERING & suspension solutions.
SCT13 TAG AXLES STEERING & suspension solutions. Mack Trunnion Stands RoadKing Heavy Duty Shocks Pitman Arm Spreader 10386 www.sadlerpowertrain.com 1 BAB Steering gears, pumps, cylinders Your headquarters
More informationINTRAAX TOP-MOUNT SPECIFICATIONS AANT 23K / AAT 23K / AAT 25K AAT 30K / AAEDT 30K TABLE OF CONTENTS. LIT NO: L600 DATE: February 2017 REVISION: I
INTRAAX TOP-MOUNT SPECIFICATIONS AANT 23K / AAT 23K / AAT 25K AAT 30K / AAEDT 30K LIT NO: L600 DATE: February 2017 REVISION: I TABLE OF CONTENTS APPLICATIONS.... 2-4 SPECIFICATIONS Suspensions AANT 23K
More informationTechnical Procedure. SUBJECT: Operation, Maintenance and Retrofit Procedures. DATE: February 2018
Technical Procedure Trailer Suspension Systems QUIK-DRAW SUBJECT: Operation, Maintenance and Retrofit Procedures LIT NO: L738 DATE: February 2018 REVISION: C Van Applications (HK Series, VANTRAAX and ULTRAA-K
More informationProduct Catalogue. Version 8.0. Section. Arvin Meritor (ROR) Axle Components
Product Catalogue Section E Version 8.0 Arvin Meritor (ROR) Axle Components PRODUCT CATALOGUE 8.0 ArvinMeritor (ROR) Axle Type Capacity Wheel Fixing 300-0003-1D0F5 TM/T25010/ZMX 11,690 kg 10 stud M22 x
More informationTorque Rods. For more information visit or call The Universal Group, LLC All Rights Reserved
Torque Rods For more information visit www.theuniversalgroup.com or call 1.800.225.1845 Universal Group The Universal Group, LLC 1025 Thomas Busch Memorial Highway Pennsauken, New Jersey 08110 1.800.225.1845
More informationPARTS LIST TRAILER BRAKE SYSTEMS. LIT NO: DATE: October 2017 REVISION: H
PARTS LIST TRAILER BRAKE SYSTEMS LIT NO: 97-097 DATE: October 07 REVISION: H TABLE OF CONTENTS INTRODUCTION ABBREVIATIONS DRUM BRAKES & 6. DRUM FOUNDATION BRAKE HXS Brakes P-TYPE DRUM FOUNDATION BRAKE
More informationConfigurations & Parts Identification
900 TWS Trailer Suspension Series Configurations & Parts Identification Hutchens Industries Advancing the Practical Application of Suspension Technology Springfield, MO n (00) 654-24 n (41) 62-5012 Fax
More informationParts & Service Manual
New 2017 Edition Parts & Service Manual SK6, SK7, SK8, SK9 B6DOW, B9DOW (Tridem) B8 & B9DOW (Tandem) ORDER GENUINE General Engines Co., Inc., 548 Swedesboro Ave., Mickleton, NJ 08056 Parts (800) 338-7088
More informationROR Trailer Products Air Suspension Parts List Indair
ROR Trailer Products Air Suspension Parts List Indair Standard Suspension 38-47 64 35-37 38-47 64 29, 30 27, 28 34 33 34 34 29, 30 27, 28 65, 66 34 33 34 50 31 34 52, 53 32 25, 26 25, 26 33 51 48, 49 25,
More informationTrailer Parts. Brake Components. Axle Components. Suspensions. Lights & Electrical. Wheels & Tires. Loading Ramps. Couplers & Safety Chains
Trailer Parts Brake Components Axle Components Suspensions Lights & Electrical Wheels & Tires Loading Ramps Couplers & Safety Chains Trailer Jacks Fenders Dump Trailer Parts Tilt SST Parts Decal Kits Brake
More informationForm 7-53, 11-15c Supersedes Form 7-53, 03-13c Sheet 1 of , Swing Air Jack Hunter Engineering Company
Form 7-53, 11-15c Sheet 1 of 8 133-84-1, 133-85-1 Swing Air Jack 2013-2016 Hunter Engineering Company 133-84-1, 133-85-1 Swing Air Jack REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING Form 7-53, 11-15c
More informationFAN CLUTCH GUIDE. Save Time & Money! With the Ultimate Fan Clutch Rebuild Kit POST-2001 SPRING ENGAGED. K Fan Pilot
18 Order NLINE www.midwestwheel.com CATALOG NUMBER FAN CLUTCH GUIDE POST-2001 SPRING ENGAGED Save Time & Money! With the Ultimate Fan Clutch Rebuild Kit Highest Torque Rating With over 5,000 inch-pounds
More informationRT RTE Steel Leaf Spring Rear Suspension
Steel Leaf Spring Rear Suspension SUBJECT: Service Instructions LIT NO: 17730-070 DATE: December 2017 REVISION: H TABLE OF CONTENTS Section 1 Introduction... 2 Section 2 Product Description... 2 Section
More informationTMC 90 SPRING SUSPENSION
TMC 90 SPRING SUSPENSION INSTALLATION and SERVICE MANUAL TMC AUSTRALIA PTY LTD Telephone: + (61) 3 8786 3688 78 Star Crescent, P.O. Box 5028 Facsimile: + (61) 3 8786 3699 Hallam, Victoria, 3083 E-mail:
More informationTrailer Parts. Brake Components. Axle Components. Suspensions. Lights & Electrical. Wheels & Tires. Loading Ramps. Couplers & Safety Chains
Trailer Parts Brake Components Axle Components Suspensions Lights & Electrical Wheels & Tires Loading Ramps Couplers & Safety Chains Trailer Jacks Fenders Dump Trailer Parts Tilt SST Parts Decal Kits Brake
More informationREAR ENGINE RIDER 42 MOWER SERIES 22
Parts Manual for REAR ENGINE RIDER MOWER SERIES MODELS 1BVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- TIRES... - FRONT END, STEERING.... - MAIN CASE... - DIFFERENTIAL, R. H. FENDER... 8-9
More informationOne Step Ahead Rod Cutter (Front Mount Unit)
One Step Ahead Rod Cutter (Front Mount Unit) Front Gauge Wheels Section 4 Model Years 1992 1994... 2-5 Model Years 1995 1996... 6-9 Model Years 1997 Present... 10-11 Front Gauge Wheel Divider 1992 Present...
More informationSubject: Align-Trac Procedures. Lit No: LIT1004 Date: 05/30/2015 Revision: A
Watson & Chalin recently announced the addition of the new Align-Trac trailing arm-to-hanger pivot connection for trailer air suspensions. This Technical Bulletin outlines the procedure to align the axle
More informationOrder NLINE. FENDERS
21 Order NLINE www.midwestwheel.com CATALOG NUMBER FENDERS Chrome Poly, Liquid Platinum, Paintable & Diamond Plate Styles Available! NEW!! SMOKY BLACK MIRROR FINISH Minimizer features the industry s first
More informationDana Spicer Steer Axles
Dana Spicer Steer Axles I Family D Family Illustrated Parts List AXIP-0090 November 2005 For the most current information, visit the Roadranger web site at www.roadranger.com Table of Contents Table of
More informationPARTS LIST UBL UNDER BEAM LIFT. LIT NO: L757 DATE: July 2018 REVISION: G
PARTS LIST UBL UNDER BEAM LIFT LIT NO: L77 DATE: July 018 REVISION: G UBL PARTS LIST OEM-INSTALLED UBL UBL - 001, UBL - 00, UBL - 00, UBL - 00 (Weld-on) INTRAAX AAT INTRAAX AANT INTRAAX AAL /K HT SERIES
More informationTechnical Procedure TRAILER SUSPENSION SYSTEMS TABLE OF CONTENTS
Technical Procedure TRAILER SUSPENSION SYSTEMS SUBJECT: Non-delay Height Control Valve Installation Procedure LIT NO: L668 DATE: July 207 REVISION: F TABLE OF CONTENTS Service Notes... 2 Contacting Hendrickson...
More informationBinkley Series by Cush RFQ Guide Rev 0, Jan 2017 Fixed Frame Mechanical Suspension
Binkley Series by Cush RFQ Guide Rev 0, Jan 2017 Fixed Frame Mechanical Suspension Numerous configurations and mounting styles require us to offer this order guide for our Cush Binkley Series fixed frame
More informationEUROPEAN REAR ENGINE RIDER SERIES 20
Parts Manual for EUROPEAN REAR ENGINE RIDER SERIES 20 MODEL E281320BE E331520KVE McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2006 Briggs & Startton Corporation Milwaukee,
More information530B ECOLO-TIGER MULCH CHISEL WARNING AND TAILIGHT KIT ECOLO-TIGER 530B
04-01 WARNING AND TAILIGHT KIT ECOLO-TIGER 530B 04-01 WARNING AND TAILIGHT KIT ECOLO-TIGER 530B 2 27602311 1 HARNESS, WIRE, Front 3 27602221 1 HARNESS, WIRE, Rear (530B) 4 27602202 2 LIGHT ASSY., Red 5
More informationIllustrated Parts List
Spicer Steer Axles Illustrated Parts List Spicer EFA Family AXIP-0074 February 2008 Table of Contents Table of Contents Introduction...2 About this Parts Book...2 Abbreviations...2 Genuine Spicer Parts...2
More informationRideStar RHP Series Sliding Tandem Trailer Air Suspension System
Maintenance Manual 14S RideStar RHP Series Sliding Tandem Trailer Air Suspension System Revised 05-14 Service Notes About This Manual This manual provides the correct lubrication, service and installation
More informationFrame Bracket Side Plate Repair Procedures
Revised 02-08 Service Parts Instructions Frame Bracket Side Plate Repair Procedures Meritor RideStar RHP Series Single-Axle and Sliding Tandem Trailer Air Suspension Systems Revised 1 Service 02-08 Parts
More informationTECHNICAL PROCEDURE TRAILER SUSPENSIONS SYSTEMS
TABLE OF CONTENTS TECHNICAL PROCEDURE TRAILER SUSPENSIONS SYSTEMS SUBJECT: Alignment Procedure LIT NO: L579 DATE: June 2007 REVISION: C Supersedes previous versions of L579. TOOLS AND EQUIPMENT............................................................2
More informationTechnical TRAILER SUSPENSION SYSTEMS. SUBJECT: Recommended Ride Height Settings. LIT NO: L388 DATE: September 2017 REVISION: H
Technical PROCEDURE TRAILER SYSTEMS SUBJECT: Recommended Ride Height Settings LIT NO: L388 DATE: September 2017 REVISION: H The tables in this publication list the recommended or designed ride heights
More informationVANTRAAX Air-Ride Slider Suspension Systems
D ELIVERS VANTRAAX Air-Ride Slider Suspension Systems B IGGER PAYLOADS, S UPERIOR P ERFORMANCE, R EDUCED M AINTENANCE VANTRAAX A family of low-m VANTRAAX 40K Optimized for dry-freight and refrigerated
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 405 / 406 SECTION: 17
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 / 0 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER,
More informationSUSPENSION & STEERING
SUSPENSION & STEERING AIR S BUSHINGS MECHANICAL S & HARDWARE SHOCK ABSORBERS STEERING PARTS & HARDWARE www.trpparts.com.au Spring back into action with quality steering and suspension parts that will keep
More information1/2 Air Impact Wrench P/N IR 2235TiMAX-2 With 2 Anvil, Weighs Only 4.9 lbs ft.-lbs. torque. 3/4 Super Duty P/N IR 261
37 Order NLINE www.midwestwheel.com CATALOG NUMBER Ingersoll Rand Air Tools & Accessories 3/8 Air Impactool IR 2115TiMAX The best power-to-weight ratio in its class 300 ft.-lbs. torque Enhanced power settings
More informationKI AIR SUSPENSION (wide Pivot Bush)
KI AIR SUSPENSION (wide Pivot Bush) Contents 1. Pre-assembly Considerations 2. Welding Instructions Chassis Connection 3. Tightening Instruction 4. Axle Alignment 5. Maintenance www.khitch.com.au Uncontrolled
More informationRefer to separate Installation Instructions for installation details.
OWNER S GUIDE 8A000729 DuraLift 13.5 13,500 CAPACITY Link Mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 www.linkmfg.com QUESTIONS? CALL CUSTOMER SERVICE 1-800-222-6283 DEALER / INSTALLER:
More informationChampion Series Zero-Turn Riders & Mower Decks
Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP
More informationTECHNICAL PROCEDURE NON-STEERABLE SUSPENSION SYSTEMS
TECHNICAL PROCEDURE NON-STEERABLE SUSPENSION SYSTEMS SUBJECT: Installation Instructions LIT NO: DATE: December 2003 TABLE OF CONTENTS Introduction... 2 Required Supplies... 2 Pre-Installation Checklist...
More informationTable of Contents. Height Control Valves. Load Scales. Lift Axle Controls. Dump Valves. QUIK-DRAW Valves. SURELOK Controls. Single Axle Dump System
Table of ontents Height ontrol Valves Overview.... 2 Height ontrol Valves Drum rake... 2 Height ontrol Valves Disc rake... 5 Aftermarket.... 6 Load Scales Overview.... 7 Load Scale Decals.... 7 Load Scales
More informationREPLACEMENT PARTS WEIGHT DISTRIBUTION SYSTEM SWAY CONTROL FIFTH WHEEL HITCHES REPLACEMENT PARTS
WEIGHT DISTRIBUTION SYSTEM Reese SC Weight Distributing Heavy Duty Trunnion Bar Weight Distributing Heavy Duty Round Bar Weight Distributing Steadi-Flex Light Duty Weight Distributing Heavy Duty Trunnion
More informationPRIMAAX EX / PRIMAAX Rear Air Suspension for International Truck Vehicles
PRIMAAX EX / PRIMAAX Rear Air Suspension for International Truck Vehicles SUBJECT: Service Instructions LIT NO: 17730-283 DATE: June 2012 REVISION: A TABLE OF CONTENTS Section 1 Introduction.........................
More information72K850ZP PARTS MANUAL
7 2 K 8 5 0 Z P PARTS MANUAL 72 MID-CUT GAS ENGINE OPTION SECTION 72 MID-CUT DECK ASSEMBLY 72" Mid-Cut Deck Assembly # PART NO. QTY DESCRIPTION 1 582096 1 72" MC DECK WELDMENT 2 582098 1 72" DECK CHANNEL
More informationLAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER, 0
More informationTMC 11T Air Suspension Service Manual
TMC 11T Air Suspension Service Manual The Group Disclaimer Versioning The author and publisher have made their best efforts to prepare this manual, and the information contained in this manual is current
More informationAR2 40K 46K Rear Air Suspension
Rear Air Suspension LIT NO: SP-177 DATE: February 2017 REVISION: E 2 SP-177 1 Equalizing Beam Assembly 2 See Selection Guide 45745-147 2 44643-009L Cross Tube 44 7 8", (If converted from RT/RTE 1 suspension,
More informationINTRAAX AANLS 20K / AAL 23K / AAL 25K AAL 30K /AAEDL 30K
INTRAAX AANLS 20K / AAL 23K / AAL 25K AAL 30K /AAEDL 30K LIT NO: L72 DATE: March 2003 REVISION: B TABLE OF CONTENTS APPLICATIONS..............................................................2, 3, 4 Suspensions
More informationTECHNICAL PROCEDURE INTRAAX SUSPENSION SYSTEMS TABLE OF CONTENTS
TECHNICAL PROCEDURE INTRAAX SUSPENSION SYSTEMS SUBJECT: Shock Mount Replacement Procedures LIT NO: L724 (Supersedes AM11 Rev B and L594 Rev C) DATE: December 1999 TABLE OF CONTENTS PREPARATION FOR PROCEDURES
More informationTAG LIFT AXLE SUSPENSION SERVICE MANUAL- 37 T
TAG LIFT AXLE SUSPENSION SERVICE MANUAL- 37 T ` Page 0 CONTENT SI.NO Description Page No. 1 Suspension Specification 2 2 Pre-Installation Notes 2 3 Suspension Parts Description 3 4 Dismantling Procedure
More information