0-5V, 1-5V, 1-6V 0-10V, 1-10V V

Size: px
Start display at page:

Download "0-5V, 1-5V, 1-6V 0-10V, 1-10V V"

Transcription

1 AST20HA Industrial Precision Transducer / Transmitter Overview The AST20HA is a digitally compensated pressure transducer / pressure transmitter that offers high performance over temperature. Krystal Bond Technology alone offers excellent non-linearity and non-repeatability performance. When it is combined with the most advanced electronics, the AST20HA steps into its own league of high performance pressure sensing at an affordable price. Benefits Asic Compensation Temperature Performance Real Time Thermal Compensation Real Time Linearity Correction Turndown Capability Applications Aerospace Analytical Instruments Hydraulics Hydrogen (Consult factory for media compatibility) Labs / Metrology Medical Military Test Stands 25 C (77 F) Accuracy Stability (1 year) Proof Burst Cycles < ± 0.1% BFSL* ± 0.1% FS, typical 2X Rated, standard** 5X or 50,000 PSI, whichever is less > 100 Million * Accuracy includes non-linearity, hysteresis & non-repeatability **For higher proof pressures, contact factory Environmental Data Temperature Operating Storage Thermal Limits Compensated Range TC Zero TC Span Other Shock Vibration EMI/RFI Protection: Rating: Krystal Bond Technology by AST -40 to 85 C (-40 to 185 F) -50 to 125 C (-58 to 250 F) 0-70 C (30 to 158 F) < ± 0.5% FS < ± 0.5% FS 100G, 10msec, 1/2 sine 10G peak, 20 to 2000Hz Yes IP-66 Electrical Data Output 4-20mA 0-5V, 1-5V, 1-6V 0-10V, 1-10V V Ratiometric Excitation 10-28VDC 10-28VDC 15-30VDC 5VDC, Regulated Current Consumption: - < 10mA < 10mA < 10mA Sampling Rate 400Hz 400Hz 400Hz 400Hz Output Noise: < 1mV, RMS < 1mV, RMS < 1mV, RMS < 1mV, RMS Zero Offset < ± 0.5% FS < ± 0.5% FS < ± 0.5% FS < ± 0.5% FS Span Tolerance < ± 0.5% FS < ± 0.5% FS < ± 0.5% FS < ± 0.5% FS Output Load: Ohms@ VDC 5k Ohms, min. 5k Ohms, min. 5k Ohms, min. Reverse Polarity Protection Yes Yes Yes Yes American Sensor Technologies 450 Clark Dr., Mt. Olive, NJ phone (973) fax (973) info@astsensors.com

2 Ordering Information AST20HA A P 4 E 0 H 000 Series Type Process Connection* A = 1/4 Male NPT B = 1/8 Male NPT C = 1/4 Male BSPP E = 9/16-18 UNF Male [SAE6] F = 7/16-20 Male UNF [SAE4] K = 7/16-20 Female UNF [SAE4] M = 3/8-24 UNF Male [SAE3] W= F250C Female Autoclave Range Insert pressure from chart Unit B= Bar K= kg/cm 2 P= PSI Outputs 1= V ratiometric 3= 1-5V 5= 0-10V (3 wire) 2= 0-5V (3 wire) 4= 4-20mA 6= 1-6V G= 1-10V Electrical A= 2 ft.(0.6m) E= Mini DIN B= 4 ft.(1.2m) I= DIN A C= 6 ft.(1.8m) R= 6- Pin Bendix D= 10 ft.(3.0m) Y= Turck M12 4-Pin Eurofast Wetted Material** 0=17-4PH 1=316 L 2= Inconel 718 (Consult factory on availability) Failure State H= High L= Low N= None PSIG BARG to 25 + V to 2 + V , , , , , , , , , , All ranges between 0-25 PSI and 0-20,000 PSI available. + Compound ranges up to to 500 PSI available. Please consult factory. Options 000= No Special Options *7/16-20 Male UNF [SAE4] and 1/8 NPT Male not available under 50PSI (1/8 NPT Male not available in 316L) F250C Female Autoclave is the only option for 10,000 to 20,000PSI, not available in 316L **316L available up to 10,000 PSI Dimensional Data Warranty Workmanship - AST, Inc. pressure transmitters have a limited one-year warranty to the original purchaser. AST, Inc. will replace or repair, free of charge, any defective transmitter. This warranty does not apply to any units that have been modified; misused, neglected or installed where the application exceeds published ratings. AST s sensors are made with pride in New Jersey, USA. If in the area please feel free to stop by for a visit! Installation/Applications - The purchaser is responsible for media compatibility, functional adequacy, and correct installation of the transmitter American Sensor Technologies Inc. AST20HA 12/18/12. All specifications subject to change without notice.

3 AST20PT Industrial ASIC Precision & Temperature Transducer / Transmitter Overview The AST20PT is a digitally compensated pressure-temperature dual output transducer/transmitter, offering measurments from a single process point, reducing process penetration points and leaks. Krystal Bond Technology alone offers excellent non-linearity and non-repeatability performance. When it is combined with the ASIC, the AST20PT steps into its own league of high performance pressure sensing at an affordable price. Benefits ASIC Compensation Temperature Performance Real Time Thermal Compensation Real Time Linearity Correction Turndown Capability Applications Aerospace Analytical Instruments Hydraulics Hydrogen* *Consult factory for media compatibility Labs / Metrology Medical Military Test Stands 25 C (77 F) Accuracy ()* <±0.25% of FS BFSL Accuracy (Temp.)* Proof + Burst Cycles ±2 C TEB 2X Rated, standard 5X or 50,000 PSI, whichever is less > 100 Million **Accuracy includes non-linearity, hysteresis & non-repeatability + For higher proof pressures, contact factory Environmental Data Operating Ambient Temperature Operating Media Temperature Storage Temperature Thermal Limits Compensated Range TC Zero TC Span Other Shock Vibration EMI/RFI Protection: Rating: Krystal Bond Technology by AST -40 to 85 C (-40 to 185 F) -55 to 125 C (-65 to 250 F) -50 to 125 C (-58 to 250 F) 0-70 C (30 to 158 F) < ± 0.5% FS < ± 0.5% FS 100G, 11msec, 1/2 sine 10G peak, 20 to 2000Hz Yes IP-66 Electrical Data Output 4-20mA V, 1-5V, 1-6V 0-10V, 1-10V V Ratiometric Excitation 10-28VDC 10-28VDC 15-28VDC 5VDC, Regulated Current Consumption: - < 10mA < 10mA < 10mA Sampling Rate 400Hz 400Hz 400Hz 400Hz Output Noise: < 1mV, RMS < 1mV, RMS < 1mV, RMS < 1mV, RMS Zero Offset < ± 0.5% FS < ± 0.5% FS < ± 0.5% FS < ± 0.5% FS Span Tolerance < ± 0.5% FS < ± 0.5% FS < ± 0.5% FS < ± 0.5% FS Output Load: Ohms@10-28VDC 5k Ohms, min. 5k Ohms, min. 5k Ohms, min. Reverse Polarity Protection Yes Yes Yes Yes ++ For units with loop-powered 4-20mA output, the pressure loop must be powered or the temperature output will not operate. American Sensor Technologies 450 Clark Dr., Mt. Olive, NJ phone (973) fax (973) info@astsensors.com

4 Ordering Information AST20PT 1 A P 3 E 1 H 000 Series Type PSIG BARG Temperature Output 1= -40 to 85 C (-40 to 185 F) 2= -40 to 125 C (-40 to 257 F) 3= 0 to 70 C (32 to 158 F) 4= -55 to 125 C (-67 to 250 F) 5= -18 to 93 C (0-200 F) Process Connection* A= 1/4 Male NPT B= 1/8 Male NPT P= 1/2 NPT Male W= F250C Female Autoclave Insert pressure code from chart Unit B= Bar K= kg/cm2 P= PSI Outputs 1= V ratiometric 3= 1-5V 5= 0-10V 2= 0-5V 4= 4-20mA 6= 1-6V G= 1-10V Electrical A= 2 ft.(0.6m) D= 10 ft.(3.0m) S= 4- Pin Bendix B= 4 ft.(1.2m) E= Mini DIN R= 6- Pin Bendix C= 6 ft.(1.8m) I= DIN A Y= Turck M12 4-Pin Eurofast Wetted Material** 0=17-4PH 1=316 L 2= Inconel 718 6= Waspalloy Fail Condition N= Not Specified H= Fail High L= Fail Low Options 000= No Special Options *1/8 NPT Male not available under 50PSI or with 316L F250C Female Autoclave is the only option for 10,000 to 20,000PSI, not available in 316L **316L available up to 10,000 PSI, Consult factory on availability of Inconel and Waspalloy to 25 + V to 2 + V , , , , , , , , , , All ranges between 0-25 PSI and 0-20,000 PSI available. + Compound ranges up to to 500 PSI available. Please consult factory. Dimensional Data Warranty Wiring information available at: Workmanship - AST, Inc. pressure transmitters have a limited one-year warranty to the original purchaser. AST, Inc. will replace or repair, free of charge, any defective transmitter. This warranty does not apply to any units that have been modified; misused, neglected or installed where the application exceeds published ratings. AST s sensors are made with pride in New Jersey, USA. If in the area please feel free to stop by for a visit! Installation/Applications - The purchaser is responsible for media compatibility, functional adequacy, and correct installation of the transmitter American Sensor Technologies Inc. AST20PT 12/18/12. All specifications subject to change without notice.

5 AST47HP High Stainless Steel Sensor / Transducer / Transmitter Overview Manufactured to withstand pressures up to 60,000 PSI, the AST47HP high pressure sensor is the best solution for high pressure and high cycle systems such as hydraulic pressure or diesel common rail pressure. Benefits One Piece Stainless Steel Construction Krystal Bond Technology is Free of Welds, Silicon Oil, & Internal O-Rings 100V/m EMI/RFI Protection Various Automotive / military Connectors & Custom Cable Lengths Available for Ease of Installation y Mini-DIN C y Bendix (PT P) y Standard Cable lengths of 2, 4, 6, and 10ft. Applications Water Jets Water Tanks Test Stands Pipeline Instrumentation 25 C (77 F) Accuracy* Stability (1 year) Cycles < ± 0.5% BFSL (<±1.0% BFSL for Voltage) ±0.5% FS, typical > 100 Million High Wells Hydraulics Systems Injection Molding Equipment Pumps * Accuracy includes non-linearity, hysteresis & non-repeatability * All orders over 10K PSI must consult factory Environmental Data Temperature Operating Storage Thermal Limits Compensated Range TC Zero TC Span Other Shock Vibration EMI/RFI Protection: Rating: Krystal Bond Technology by AST -40 to 85 C (-40 to 185 F) -40 to 125 C (-40 to 250 F) 0 to 55 C (30 to 130 F) 100G, 11 msec, 1/2 sine 20G peak, 20 to 2400 Hz. Yes IP-68 Electrical Data Output 4-20mA Voltage (3 or 4 Wire) 0-50mV (10mV/V) Excitation 10-28VDC 10-28VDC 5VDC Output Impedance >10k Ohms <100 Ohms, Nominal 1100 Ohms, Nominal Current Consumption: 20mA, typical <10mA <5mA Bandwidth (-3dB): DC to 250 Hz (-3dB): DC to 1kHz (-3dB): DC to 5kHz, min Output Noise: - <2mV RMS - Zero Offset: <±1% of FS <±1% of FS <±2% of FS Span Tolerance: <±2% of FS <±2% of FS Output Load: Ohms@10-28VDC 10k Ohms, min >1M Ohms Reverse Polarity Protection Yes Yes - American Sensor Technologies 450 Clark Dr., Mt. Olive, NJ phone (973) fax (973) info@astsensors.com

6 Ordering Information AST47HP W P 4 R Series Type Configuration Interface W= F250C Female Autoclave X= 9/16-18 UNF Male with 37 flare X= M16* 1.5 Female with sealing cone Range Insert 5 digit pressure code Unit B= Bar K= kg/cm2 P= PSI Outputs 2= 0-5V (3 wire) 3= 1-5VDC 4= 4-20mA 5= 0-10V (3 wire) Electrical + A= 2 ft. (0.6m) E= Mini DIN B= 4 ft. (1.2m) I= DIN 43650A C= 6 ft. (1.8m) R= Bendix 6 pin (PT P) D= 10 ft. (3m) High Fittings Include: 9/16-18 UNF Male with 37 Flare F250C Female Autoclave M16*1.5 Female with Sealing Cone 10,000-20,000 PSI ( BAR) 10,000-45,000 PSI (700-3,000 BAR) 10,000-60,000 PSI ( BAR) Wetted Material 0= 17-4PH Options 000= No special options 123= M16*1.5 Female with sealing cone 153= 9/16-18 UNF Male with 37 flare + Wiring information available at: Dimensional Data Max F250C Female Autoclave Rated to 45,000 PSIG Max Rated to 20,000 PSIG Warranty Workmanship - AST, Inc. pressure transmitters have a limited one-year warranty to the original purchaser. AST, Inc. will replace or repair, free of charge, any defective transmitter. This warranty does not apply to any units that have been modified; misused, neglected or installed where the application exceeds published ratings. AST s sensors are made with pride in New Jersey, USA. If in the area please feel free to stop by for a visit! Installation/Applications - The purchaser is responsible for media compatibility, functional adequacy, and correct installation of the transmitter American Sensor Technologies Inc. AST47HP 12/18/2012. All specifications subject to change without notice.

7 AST47SM Steel / Aluminum Mill Stainless Steel Transmitter Stainless Steel Media Isolated Sensor Overview The AST47SM steel mill package is able to perform in rugged environments as well as meet the high demands of the steel and aluminum industry. The pressure port design is compatible with the high pressure spikes when the slab is entering and exiting the rolling mill. Benefits No Silicone Oil, Welds, or Internal O-rings High Proof and Burst Ratings Special Internal Restrictor Maintains High Frequency Response Internal Protection Against Spikes 1/4 BSPP Male Process Connection Available (contact factory for other options) Sealed Against Water Ingress Applications Roll Forming Stamping Coolant Systems Rolling Mill Pumps 25 C (77 F) Accuracy* Stability (1 year) Over range Protection Burst Cycles < ± 0.1% BFSL ±0.25% FS, typical 5X Rated 10X or 20,000 PSI whichever is less >100 Million 1 Accuracy includes: Non-linearity, Hysteresis and Non-repeatability * All orders over 10K PSI must consult factory Krystal Bond Technology by AST Environmental Data Temperature Operating -40 to 85 C (-40 to 185 F) Storage -50 to 125 C (-58 to 250 F) Thermal Limits Compensated Range 0 to 70 C (30 to 158 F) TC Zero <±0.5% of FS TC Span <±0.5% of FS Other Shock EN Vibration EN , , and IEC EMI/RFI Protection: Yes-100 V/m Rating: IP-69 Electrical Data Output 4-20mA 0-5V 0-10V Excitation 10-28VDC 10-28VDC 15-30VDC Current Consumption: - < 10mA < 10mA Sampling Rate 400Hz 400Hz 400Hz Output Noise: < 1mV, RMS < 1mV, RMS < 1mV, RMS Zero Offset < ± 0.5% FS < ± 0.5% FS < ± 0.5% FS Span Tolerance < ± 0.5% FS < ± 0.5% FS < ± 0.5% FS Output Load: Ohms@10-28VDC 5k Ohms, min. 5k Ohms, min. Reverse Polarity Protection Yes Yes Yes American Sensor Technologies 450 Clark Dr., Mt. Olive, NJ phone (973) fax (973) info@astsensors.com

8 Ordering Information AST47SM C B 4 R Series Type Process Connection A=1/4 NPT Male C=1/4 BSP Male D= G1/4 Male Range Insert 5-digit pressure code Unit B=BAR K=kg/cm2 P=PSI Outputs 2=0-5V (3-Wire) 4=4-20mA (Loop Powered) 5=0-10V (3-Wire) K= 0-5V (4 Wire) Electrical + D=10 ft. R=Bendix 6 Pin Wetted Material 0=17-4PH Options 000= No Special Options Ranges* PSI Measurment 0-1, , , , , BARG * For other ranges, please consult factory. + Wiring information available at: Dimensional Data Max Max Warranty Workmanship - AST, Inc. pressure transmitters have a limited one-year warranty to the original purchaser. AST, Inc. will replace or repair, free of charge, any defective transmitter. This warranty does not apply to any units that have been modified; misused, neglected or installed where the application exceeds published ratings. AST s sensors are made with pride in New Jersey, USA. If in the area please feel free to stop by for a visit! Installation/Applications - The purchaser is responsible for media compatibility, functional adequacy, and correct installation of the transmitter American Sensor Technologies Inc. AST47SM 12/18/12. All specifications subject to change without notice.

9 AST2000 Industrial Stainless Steel Transducer Overview The AST2000 is an ASIC-compensated, high quality, stainless steel pressure transducer designed for use in the measurement of liquids and gases. Intended for high volume applications requiring excellent performance, the AST2000 succeeds by offering highly competitive pricing. Complete with a fully welded stainless steel housing, high shock and vibration and EMI/RFI protection, the AST2000 will survive in the most extreme conditions. Benefits No Oil Fill, Welds, or Internal O-rings Wide Operating Temperature Range Compatible with Liquids and Gases Rugged, Compact Design Applications Industrial OEM Equipment Hydraulic Systems HVAC Equipment Refrigeration Equipment Automotive *Consult Factory for media compatibility 25 C (77 F) Accuracy* < ±0.25% BFSL Stability (1 year) Over range Protection Burst Cycles Hydrogen Fuel Cells* Energy / Water Management Test Stands Off-Road/Construction Equipment ±0.25% FS, typical 2X Rated 5X or 20,000 PSI (whichever is less)* > 100 Million * Accuracy includes non-linearity, hysteresis & non-repeatability Environmental Data Temperature Operating Storage Thermal Limits Compensated Range TC Zero TC Span Other Shock Vibration EMI/RFI Protection: Rating: Krystal Bond Technology by AST -40 to 125 C (-40 to 250 F) -40 to 125 C (-40 to 250 F) 0 to 55 C (30 to 130 F) <± 0.5% FS <± 0.5% FS 100G, 11 msec, 1/2 sine 20G peak, 20 to 2400 Hz. Yes IP-66 (optional IP-67) Electrical Data Output Voltage (.25-5V, 1-5V, 1-6V) V Ratiometric Excitation 10-30VDC 5VDC Output Impedance <100 Ohms, Nominal <100 Ohms, Nominal Current Consumption: <10mA <10mA Bandwidth (-3dB): DC to 3KHZ (3dB): DC to 3KHZ Output Noise: <2mV RMS <2mV RMS Zero Offset: ±0.5% of FS ±0.5% of FS Span Tolerance: ±1.0% of FS ±1.0% of FS Output Load: 10k Ohms, min 10K Ohms, min Reverse Polarity Protection Yes Yes American Sensor Technologies 450 Clark Dr., Mt. Olive, NJ phone (973) fax (973) info@astsensors.com

10 Ordering Information AST2000 A P 1 E Series Type Process Connection A = 1/4 Male NPT B = 1/8 Male NPT* C = 1/4 Male BSPP F = 7/16-20 Male UNF [SAE4]* K = 7/16-20 Female UNF [SAE4] Range Insert 5-digit pressure code Unit B= Bar K= kg/cm2 P= PSI Outputs 1= V ratiometric 3= 1-5V 6= 1-6V Electrical + E=Mini DIN R=6-Pin Bendix F=Packard Metripack Pin Y=M12 Eurofast K= DT04 Deutsch 3-Pin Z= DT04 Deutsch 4-Pin Wetted Material 0=17-4PH 1=316L Options 000= No Special Options PSIG Ranges* BARG to 25** V0025** -1 to 2** V0002** , , , , , *All ranges between 0-25 PSI and 0-10,000 PSI available. **Compound ranges up to to 500 PSI available. Please consult factory. * Not available under 50PSI (1/8 NPT Male not available in 316L) + Wiring information available at: Dimensional Data Warranty Workmanship - AST, Inc. pressure transmitters have a limited one-year warranty to the original purchaser. AST, Inc. will replace or repair, free of charge, any defective transmitter. This warranty does not apply to any units that have been modified; misused, neglected or installed where the application exceeds published ratings. AST s sensors are made with pride in New Jersey, USA. If in the area please feel free to stop by for a visit! Installation/Applications - The purchaser is responsible for media compatibility, functional adequacy, and correct installation of the transmitter American Sensor Technologies Inc. AST /18/12. All specifications subject to change without notice.

11 AST2000 Hydrogen Sensor 316L Stainless Steel, Media Isolated Sensor for Hydrogen Applications Overview The AST2000 series is now available for hydrogen pressure sensing applications. Tested to a variety of hydrogen and automotive standards, the AST2000 series combines the best mechanical design for hydrogen measurement with high performance digital compensation. Krystal Bond Technology by AST Benefits One piece design All 316L wetted material for optimal compatibility No oil-filled cavities leave no chance of containment Non-welded diaphragm eliminates leak paths and weak points Digitally compensated Krystal Bond Technology Applications* PEM Fuel Cells Hydrogen Storage Hydrogen Filling Stations Test Stands Back Up Power * Lean more about Hydrogen pressure measurement (Hydrogen Applications) Approvals EC79 (applicable to table below) CE EN61326 (all models) TUV Approval Files 25 C (77 F) Accuracy* < ±0.5% BFSL Stability (1 year) Over range Protection Cycles Range ±0.25% FS, typical 2X Rated > 100 Million * Accuracy includes non-linearity, hysteresis & non-repeatability Burst /1-TUV 20 Bar (2MPa) 600 Bar EC79 20 Bar (2MPa) 600 Bar EC Bar (35MPa) 2800 Bar EC Bar (70MPa) 2800 Bar Environmental Data Temperature Operating -40 to 85 C (-40 to 185 F) Storage -40 to 125 C (-40 to 250 F) Thermal Limits Compensated Range -10 to 60 C (14 to 140 F) Thermal Error +/- 2% of FS Other Shock 100G, 11 msec, 1/2 sine Vibration 20G peak, 20 to 2400 Hz. EMI/RFI Protection: Yes Rating: IPX6K Electrical Data Output V ratiometric** Excitation 5VDC regulated Output Impedance <100 Ohms, Nominal Current Consumption: <10mA Bandwidth -(3dB): DC to 3kHz Output Noise: <2mV RMS Zero Offset +/-0.5% of FS Span Tolerance +/-0.5% of FS Output Load: 10K Ohms, Min. Reverse Polarity Protection Yes **4-20mA and 1-5V outputs available, contact factory American Sensor Technologies 450 Clark Dr., Mt. Olive, NJ phone (973) fax (973) info@astsensors.com

12 Ordering Information AST2000 F B 1 F Test Performed Series Ports F= 7/16-20 UNF Male [SAE 4] M= 3/8-24 UNF Male [SAE 3] X= Special (see option code 487) Range = 20 Bar 00448= 448 Bar 00500= 500 Bar 00700= 700 Bar 00900= 900 Bar Unit B= Bar Output 1 = V ratiometric [5VDC supply] Electrical F= Packard Metripack 150 Wetted Material 1= 316L Options 000= No Options 384= High Accuracy 487= 1/2-20 UNF Stud for high pressure H 2 storage + 3/8-24 UNF Male [SAE 3] is only available for 20 bar and 448 bar Dimensional Data The tests preformed are marked as "X" in the following table. The test conditions, parameters, and details are described in the Annex 1. (Test Report) to Technical Report No. KS dated No. Type of Test EU 406/2010 Remark Annex IV 1 General Requirements Part 3 Sect. 2 X 2 Technical Part 3 Sect. 3 X Requirements 3 Hydrogen Part 3 Sect X Compatibility Test 4 Ageing Test* Part 3 Sect X 5 Ozone Compatibility Test** 6 Corrosion Resistance Test Part 3 Sect Part 3 Sect Not Applicable X 7 Endurance Test Part 3 Sect X 8 Hydraulic Part 3 Sect X Cycle Test 9 Internal Leakage Test Part 3 Sect Not Applicable 10 External Leakage Test Part 3 Sect X 11 Isolation Resistance ECE R110 Rev. 1 X Testing 12 EMC Compatibility ECE R110 Rev. 1 X Testing 13 Review of Information Documentation EU 406/2010 Annex II Part 1 X * Test applies only for non-metallic materials ** Test applies only to elastomer materials where either a sealing surface is exposed directly to air or if used as a flexible fuel line cover. Warranty Workmanship - AST, Inc. pressure transmitters have a limited one-year warranty to the original purchaser. AST, Inc. will replace or repair, free of charge, any defective transmitter. This warranty does not apply to any units that have been modified; misused, neglected or installed where the application exceeds published ratings. AST s sensors are made with pride in New Jersey, USA. If in the area please feel free to stop by for a visit! Installation/Applications - The purchaser is responsible for media compatibility, functional adequacy, and correct installation of the transmitter American Sensor Technologies Inc. AST2000-H2 12/18/12. All specifications subject to change without notice.

13 AST4000 Industrial OEM Stainless Steel Sensor / Transducer / Transmitter Overview Utilizing a one-piece stainless steel sensing element, the AST4000 covers a wide variety of applications that require rugged construction, high cycle life, as well as media compatibility to deliver outstanding and long-term performance. The AST4000 is offered with a variety of threads, pressures, outputs and electrical connections in order to make system integration seamless. Benefits High Strength Stainless Steel Construction No Oil, Welds or Internal O-rings s up to 10,000 PSI Low Static and Thermal Errors Unparalleled Price and Performance Compatible with Liquids and Gases EMI/RFI Protection UL/cUL 508 Approved P A P P R O V E D R O D U C T Krystal Bond Technology by AST Applications Industrial OEM Equipment Water Management Pneumatics Hydrogen Storage Sub Sea 25 C (77 F) Accuracy* < ±0.5% BFSL Stability (1 year) Over range Protection Burst Cycles HVAC/R Equipment Control Panels Hydraulic Systems Data Loggers ±0.25% FS, typical 2X Rated 5X or 20,000 PSI (whichever is less) > 100 Million * Accuracy includes non-linearity, hysteresis & non-repeatability Environmental Data Temperature Operating -40 to 85 C (-40 to 185 F) Storage -40 to 100 C (-40 to 212 F) Thermal Limits Compensated Range 0 to 55 C (30 to 130 F) TC Zero TC Span Other Shock 100G, 11 msec, 1/2 sine Vibration 10G peak, 20 to 2000 Hz. EMI/RFI Protection: Yes Rating: IP-66 (housing only) Electrical Data Output 4-20mA 1-5VDC, 1-6VDC 0-50mV (10mV/V) V Ratiometric Excitation 10-28VDC 10-28VDC 5VDC, typical 5VDC, regulated Output Impedance >10k Ohms <100 Ohms, Nominal 1100 Ohms, Nominal <100 Ohms, Nominal Current Consumption: 20mA, typical <10mA <5mA <10mA Bandwidth (-3dB): DC to 250 Hz (-3dB): DC to 1kHz (-3dB): DC to 5kHz, min (-3dB): DC to 1kHz Output Noise: - <2mV RMS - <2mV RMS Zero Offset: <±1% of FS <±1% of FS < ±2% of FS <±1% of FS Span Tolerance: < ±2% of FS Output Load: Ohms@10-28VDC 10k Ohms, min >1M Ohms 10K Ohms, min Reverse Polarity Protection Yes Yes - Yes American Sensor Technologies 450 Clark Dr., Mt. Olive, NJ phone (973) fax (973) info@astsensors.com

14 Ordering Information AST4000 A P 4 E Series Type Process Connection A= 1/4 NPT Male B= 1/8 NPT Male** C= 1/4 BSPP Male F= 7/16-20 UNF Male** K= SAE4 Female (use option codes 006 or 143) P= 1/2 MNPT : Insert 5-digit pressure code Unit B= Bar K= kg/cm2 P= PSI Outputs 1= V ratiometric 6= 1-6V 3= 1-5V A= 10mV/V 4= 4-20mA (2 wire loop powered) Electrical (Wiring information available at: A= 2 ft. (0.6m) G= 4-pin Molex Conn.(No housing) B= 4 ft. (1.2m) I= DIN 43650A C= 6 ft. (1.8m) K= DT04 Deutsch 3-Pin D= 10 ft. (3.0m) X= Special E= Mini DIN Y= M12 Eurofast F= Packard Metripack Z= DT04 Deutsch 4-Pin Pin Conn. Wetted Material 0= 17-4PH 1= 316L 2= Inconel 718* Options 000 = No Options 006= Schrader Depressor Pin+ 009= Sealed Gauge Reference* 094= Impulse Subsea Connection & all 316L wetted material (use with X electrical connection and 1 for wetted materials)* 117= Internal Restrictor Plug* 143= Schrader Depressor Pin & Sealed Gauge References+ 165= Internal Restrictor Plug & Sealed Gauge References* *Consult factory on availability ** Not available under 50PSI (1/8 NPT Male not available in 316L) +Options only available with SAE4 Female Port option K. Dimensional Data PSIG Ranges* BARG to 25** V0025** -1 to 2** V0002** , , , , , *All pressures between 0-25 PSI and 0-10,000 PSI available. **Compound ranges up to to 500 PSI available. Please consult factory. Warranty Workmanship - AST, Inc. pressure transmitters have a limited one-year warranty to the original purchaser. AST, Inc. will replace or repair, free of charge, any defective transmitter. This warranty does not apply to any units that have been modified; misused, neglected or installed where the application exceeds published ratings. AST s sensors are made with pride in New Jersey, USA. If in the area please feel free to stop by for a visit! Installation/Applications - The purchaser is responsible for media compatibility, functional adequacy, and correct installation of the transmitter American Sensor Technologies Inc. AST /18/12. All specifications subject to change without notice.

15 AST4100 Compact Stainless Steel Sensor / Transducer Overview American Sensor Technologies, presents the AST4100 as a compact, price-competitive stainless steel pressure sensor. Compatible with a wide range of liquids and gases over pressure ranges up to 10,000 PSI, the AST4100 covers a diversified variety of applications. AST4100 sensors are available with outputs of 10mV/V, as well as high level outputs that utilize AST s proprietary Krystal Bond Technology. Benefits High Strength Stainless Steel Construction No Oil, Welds or Internal O-rings (one piece sensing element) Ranges up to 10,000 PSI Low Static and Thermal Errors Price / Performance Deliver Value Compatible with Various Liquids and Gases UL/cUL 508 Approved Applications Test Equipment Control Panels Hydraulic Systems Data Loggers 25 C (77 F) Accuracy* < ±0.5% BFSL Stability (1 year) Over range Protection Burst Cycles HVAC/R Equipment Pneumatics ±0.25% FS, typical 2X Rated 5X or 20,000 PSI (whichever is less) > 100 Million * Accuracy includes non-linearity, hysteresis & non-repeatability Environmental Data Temperature Operating Storage Thermal Limits Compensated Range TC Zero TC Span Other Shock Vibration EMI/RFI Protection: Rating: Krystal Bond Technology by AST -40 to 85 C (-40 to 185 F) -40 to 100 C (-40 to 212 F) 0 to 55 C (30 to 130 F) 100G, 11 msec, 1/2 sine 10G peak, 20 to 2000 Hz. No IP-65 Electrical Data Output 4-20mA 1-5VDC, 1-6VDC 0-50mV (10mV/V) V Ratiometric Excitation 10-28VDC 10-28VDC 5VDC, typical 5VDC, regulated Output Impedance >10k Ohms <100 Ohms, Nominal 1100 Ohms, Nominal <100 Ohms, Nominal Current Consumption: 20mA, typical <10mA <5mA <10mA Bandwidth (-3dB): DC to 250 Hz (-3dB): DC to 1kHz (-3dB): DC to 5kHz, min (-3dB): DC to 1kHz Output Noise: - <2mV RMS - <2mV RMS Zero Offset: <±1% of FS <±1% of FS < ±2% of FS <±1% of FS Span Tolerance: < ±2% of FS Output Load: Ohms@10-28VDC 10k Ohms, min >1M Ohms 10K Ohms, min Reverse Polarity Protection Yes Yes - Yes American Sensor Technologies 450 Clark Dr., Mt. Olive, NJ phone (973) fax (973) info@astsensors.com

16 Ordering Information AST4100 A P 4 A Series Type Process Connection A=1/4 NPT Male B=1/8 NPT Male* C=1/4 BSPP Male F=7/16-20 UNF Male* Insert 5-digit pressure code Unit B= Bar K= kg/cm2 P= PSI Outputs 1= V ratiometric 6= 1-6V 3= 1-5V A= 10mV/V 4= 4-20mA (2 wire loop powered) Electrical + A=2 ft. (0.6m) B=4 ft. (1.2m)}AST s standard C=6 ft. (1.8m) cable is 24AWG D=10 ft. (3.0m) Wetted Material 0=17-4PH 1=316L Options 000=No special factory options * Not available under 50PSI (1/8 NPT Male not available in 316L) + Wiring information available at: Dimensional Data PSIG Ranges* BARG to 25** V0025** -1 to 2** V0002** , , , , , *All pressures between 0-25 PSI and 0-10,000 PSI available. **Compound ranges up to to 500 PSI available. Please consult factory. Warranty Workmanship - AST, Inc. pressure transmitters have a limited one-year warranty to the original purchaser. AST, Inc. will replace or repair, free of charge, any defective transmitter. This warranty does not apply to any units that have been modified; misused, neglected or installed where the application exceeds published ratings. AST s sensors are made with pride in New Jersey, USA. If in the area please feel free to stop by for a visit! Installation/Applications - The purchaser is responsible for media compatibility, functional adequacy, and correct installation of the transmitter American Sensor Technologies Inc. AST /18/12. All specifications subject to change without notice.

17 AST4200 Industrial Grade Panel Mount Stainless Steel Sensor / Transducer Overview In order to simplify installation of pressure sensors for control panel applications, American Sensor Technologies offers the AST4200 Panel Mount Sensor. This innovative sensor is mounted directly through the panel without the need for additional adaptors, eliminating potential leak paths. Benefits High Strength Stainless Steel Construction No Oil, Welds or Internal O-rings Ranges up to 10,000 PSI Low Static and Thermal Errors Unparalleled Price and Performance Compatible with Various Liquids and Gases EMI/RFI Protection Simple Installation for Panel Builders UL/cUL 508 Approved Applications Control Panels Hydraulic Systems Data Loggers 25 C (77 F) Accuracy* < ±0.5% BFSL Stability (1 year) Over range Protection Burst Cycles ±0.25% FS, typical 2X Rated 5X or 20,000 PSI (whichever is less) > 100 Million * Accuracy includes non-linearity, hysteresis & non-repeatability Industrial OEM Equipment HVAC/R Equipment Pneumatics Environmental Data Temperature Operating Storage Thermal Limits Compensated Range TC Zero TC Span Other Shock Vibration EMI/RFI Protection: Rating: Krystal Bond Technology by AST -40 to 85 C (-40 to 185 F) -40 to 100 C (-40 to 212 F) 0 to 55 C (30 to 130 F) 100G, 11 msec, 1/2 sine 10G peak, 20 to 2000 Hz. Yes IP-66 (housing only) Electrical Data Output 4-20mA 1-5VDC, 1-6VDC 0-50mV (10mV/V) V Ratiometric Excitation 10-28VDC 10-28VDC 5VDC, typical 5VDC, regulated Output Impedance >10k Ohms <100 Ohms, Nominal 1100 Ohms, Nominal <100 Ohms, Nominal Current Consumption: 20mA, typical <10mA <5mA <10mA Bandwidth (-3dB): DC to 250 Hz (-3dB): DC to 1kHz (-3dB): DC to 5kHz, min (-3dB): DC to 1kHz Output Noise: - <2mV RMS - <2mV RMS Zero Offset: <±1% of FS <±1% of FS < ±2% of FS <±1% of FS Span Tolerance: < ±2% of FS Output Load: Ohms@10-28VDC 10k Ohms, min >1M Ohms 10K Ohms, min Reverse Polarity Protection Yes Yes - Yes American Sensor Technologies 450 Clark Dr., Mt. Olive, NJ phone (973) fax (973) info@astsensors.com

18 Ordering Information AST4200 J P 4 A Panel Mount Series Type Configuration Interface A=1/4 NPT Male J=1/8 NPT Female V=1/8 BSP Female Range Insert 5-digit pressure code Unit B= Bar K= kg/cm2 P= PSI Outputs 1= V ratiometric 6= 1-6V 3= 1-5V A= 10mV/V 4= 4-20mA (2 wire loop powered) Electrical + A=2 ft. (0.6m) F=Packard Metripack Pin Conn. B=4 ft. (1.2m) G=4-pin Molex Conn. (No housing) C=6 ft. (1.8m) I=DIN 43650A D=10 ft. (3.0m) K= DT04 Deutsch 4-Pin E=Mini DIN Z= DT04 Deutsch 4-Pin Wetted Material 0= 17-4PH Options 000=No special factory options + Wiring information available at: PSIG Ranges* BARG to 25** V0025** -1 to 2** V0002** , , , , , *Typical ranges. All ranges between 0-25 PSI and 0-10,000 PSI available. **Compound ranges up to to 500 PSI available. Please consult factory. Dimensional Data AST4200 with housing AST4200 without housing Panel Mount Solution Warranty Workmanship - AST, Inc. pressure transmitters have a limited one-year warranty to the original purchaser. AST, Inc. will replace or repair, free of charge, any defective transmitter. This warranty does not apply to any units that have been modified; misused, neglected or installed where the application exceeds published ratings. AST s sensors are made with pride in New Jersey, USA. If in the area please feel free to stop by for a visit! Installation/Applications - The purchaser is responsible for media compatibility, functional adequacy, and correct installation of the transmitter American Sensor Technologies Inc. AST /18/12. All specifications subject to change without notice.

19 AST V / 0-10V / Frequency Stainless Steel Transducer Overview The AST4700 is a competitively priced, high quality stainless steel pressure transducer intended for the use of measurement of liquids and gases. Utilizing Krystal Bond Technology. Offering a one piece stainless steel sensing element the AST4700 is free of welds, internal o-rings, and oil fill. This translates into rugged construction, high cycle life, wide range of media compatibility, along with all of the benefits of MEMs technology. The AST4700 can be packaged with a variety of process connections including NPT, SAE(UNF), and BSP. Voltage, current and frequency output signals are all standard choices when selecting this product. Electrical connection options include cable, Hirschmann, and Bendix. Benefits High Strength Stainless Steel Construction Measure up to 10,000 PSI Various Mechanical and Electrical Configurations Suitable for High Shock and Vibration CE EN61326 Certified Applications Test Stands & Lab Equipment Data Loggers Instrumentation 25 C (77 F) Accuracy* Stability (1 year) Over range Protection Burst Cycles < ±0.5% BFSL (0.25% and 0.1% optional - some configurations) ±0.25% FS, typical 2X Rated 5X Rated > 100 Million Hydraulic Systems HVAC/R Systems Water Management * Accuracy includes non-linearity, hysteresis & non-repeatability Environmental Data Temperature Operating Storage Thermal Limits Compensated Range TC Zero TC Span Other Shock Vibration EMI/RFI Protection: Rating: Krystal Bond Technology by AST -40 to 85 C (-40 to 185 F) -40 to 125 C (-40 to 250 F) 0 to 55 C (30 to 130 F) 100G, 11 msec, 1/2 sine 20G peak, 20 to 2400 Hz. Yes IP-66 Electrical Data Output 0-5V (3 or 4 Wire) 0-10V (3 or 4 wire) Frequency (1-6KHz) Excitation 10-28VDC 15-28VDC 10-28VDC Output Impedance <100 Ohms, Nominal <100 Ohms, Nominal 10K pull-up Current Consumption: <10mA <10mA <15mA Bandwidth (-3dB): DC to 1kHz (-3dB): DC to 1kHz (-3dB): DC to 250 Hz Output Noise: <2mV RMS <2mV RMS <2mV RMS Zero Offset: <±1% of FS <±1% of FS <±1% of FS Span Tolerance: Output Load: 10k Ohms, min 10k Ohms, min 10k Ohms, min Reverse Polarity Protection Yes Yes Yes American Sensor Technologies 450 Clark Dr., Mt. Olive, NJ phone (973) fax (973) info@astsensors.com

20 Ordering Information AST4700 A P 5 A Series Type Process Connection A= 1/4 NPT Male B= 1/8 NPT Male* C= 1/4 BSP Male F= 7/16-20 UNF Male* Range Insert 5-digit pressure code Unit B= BAR K= kg/cm2 P= PSI Outputs 2= 0-5V (3-Wire) K= 0-5V (4-Wire) 5= 0-10V (3-Wire) L= 0-10V (4-Wire) H= 1-6kHz Electrical + A= 2 ft. D= 10 ft. I= DIN 43650A B= 4 ft. E= Mini DIN 43650C R= Bendix 6 Pin C= 6 ft. Wetted Material 0= 17-4PH 1= 316L Options 000= No Special Options PSIG Ranges* BARG to 25** V0025** -1 to 2** V0002** , , , , , *Typical ranges. All ranges between 0-25 PSI and 0-10,000 PSI available. **Compound ranges up to to 500 PSI available. Please consult factory Wiring information available at: * Not available under 50PSI (1/8 NPT Male not available in 316L) Dimensional Data Warranty Workmanship - AST, Inc. pressure transmitters have a limited one-year warranty to the original purchaser. AST, Inc. will replace or repair, free of charge, any defective transmitter. This warranty does not apply to any units that have been modified; misused, neglected or installed where the application exceeds published ratings. AST s sensors are made with pride in New Jersey, USA. If in the area please feel free to stop by for a visit! Installation/Applications - The purchaser is responsible for media compatibility, functional adequacy, and correct installation of the transmitter American Sensor Technologies Inc. AST /3/11. All specifications subject to change without notice.

21 AST4710 Absolute Stainless Steel Transducer / Transmitter Overview The AST4710 is built for applications requiring absolute pressure measurement of liquids and gases that are compatible with stainless steel. Due to its stainless steel construction, welded housing and high shock and vibration ratings, the AST4710 translates into a rugged, reliable absolute pressure transducer or transmitter. Supplied with various pressure port, output and electrical connection options, the AST4710 is well-suited for a variety of applications across many industries. Benefits High Accuracy High Strength Stainless Steel Construction No Internal O-rings Rugged Construction CE EN61326 Suitable for High Shock and Vibration Applications Test Stands Energy and Water Management Autoclave 25 C (77 F) Accuracy* Stability (1 year) Over range Protection Burst Cycles <±0.25% BFSL ±0.25%FS, typ 2X Rated 5X Rated >10 Million * Accuracy includes non-linearity, hysteresis & non-repeatability Instrumentation Data Loggers Barometric Correctors Environmental Data Temperature Operating -40 to 85 C (-40 to 185 F) Storage -40 to 125 C (-40 to 250 F) Thermal Limits Compensated Range 0 to 70 C (30 to 160 F) TC Zero TC Span Other Shock 100G, 11 msec, 1/2 sine Vibration 20G peak, 20 to 2400 Hz. EMI/RFI Protection: Yes Rating: IP-66 Electrical Data Output 0-50mV (10mV/V) 4-20mA Voltage (3 or 4 Wire) Excitation 5VDC, typical 10-28VDC 10-28VDC Output Impedance 5K Ohms, Nominal >10k Ohms <100 Ohms, Nominal Current Consumption: <5mA 20mA, typical <10mA Bandwidth (-3db): DC to 1kHz (-3dB): DC to 250 Hz (-3dB): DC to 1kHz Output Noise: N/A - <2mV RMS Zero Offset: <±2% of FS <±1% of FS <±1% of FS Span Tolerance: <±2% of FS <±2% of FS Output Load: >1M Ohm Ohms@10-28VDC 10k Ohms, min Reverse Polarity Protection N/A Yes Yes American Sensor Technologies 450 Clark Dr., Mt. Olive, NJ phone (973) fax (973) info@astsensors.com

22 Ordering Information AST4710 A A0100 P 4 A Series Type Process Connection A=1/4 NPT Male C=1/4 BSP Male F=7/16-20 UNF Male* J= 1/8 NPT Female [Panel Mount option code 066 required] Range Insert 5-digit pressure code Unit P=PSI Outputs A=10mV/V 2=0-5V (3-Wire) Electrical + A=2 ft. E=Mini DIN 43650C B=4 ft. I=DIN43650A C=6 ft. R=Bendix 6 Pin D=10 ft. 3=1-5V (3-Wire) 4=4-20mA (Loop Powered) 5=0-10V (3-Wire) PSI ABSOLUTE Ranges PROOF PSIA BURST PSIA PRESSURE CODE A A A A A A0300 Wetted Material 1=316L Options 000= No Special Options 066= Panel Mount (1/8-27 NPT Female Only) * Not available under 50PSI + Wiring information available at: Dimensional Data Max Max Warranty Workmanship - AST, Inc. pressure transmitters have a limited one-year warranty to the original purchaser. AST, Inc. will replace or repair, free of charge, any defective transmitter. This warranty does not apply to any units that have been modified; misused, neglected or installed where the application exceeds published ratings. AST4710 is not recommended for use with hydrogen. AST s sensors are made with pride in New Jersey, USA. If in the area please feel free to stop by for a visit! Installation/Applications - The purchaser is responsible for media compatibility, functional adequacy, and correct installation of the transmitter American Sensor Technologies Inc. AST /18/12. All specifications subject to change without notice.

AST44LP Intrinsically Safe Low Pressure Transducers / Transmitters

AST44LP Intrinsically Safe Low Pressure Transducers / Transmitters AST44LP Intrinsically Safe Low Transducers / Transmitters Class I Division 1 Groups C, D IS with Approved Barrier OVERVIEW The AST44LP is a stainless steel pressure transducer with a wide variety of options.

More information

AST46HA Factory Sealed Gauge / ASIC

AST46HA Factory Sealed Gauge / ASIC AST46HA Factory Sealed Gauge / ASI Explosionproof Transmitter SA Approved For Hazardous Locations Overview AST46HA high accuracy Explosionproof Transducer/Transmitter is SA approved for use in hazardous

More information

PRESSURE TRANSDUCERS. Specifications. Individual Specifications

PRESSURE TRANSDUCERS. Specifications. Individual Specifications 00 Series and 00 Heavy Duty Series Compact OEM Pressure Transmitters 0 50 psi to 0-0,000 psi ranges (0-.5 bar to 0-,00 bar) High Proof Pressures Broad Choice of Outputs RoHS Compliant For OEMs that need

More information

Transducers Direct, LLC Overview

Transducers Direct, LLC Overview 2010 PRODUCT CATALOG Please use PDF Bookmarks to navigate this catalog Contents: Company Overview Transducers Direct Web Page (Must be connected to the Internet). Catalog Pressure Transducers Linear and

More information

SSI Technologies MediaSensor

SSI Technologies MediaSensor SSI Technologies MediaSensor P51 Pressure Transducers Product Description SSI s line of bulk micro-machined, absolute and gage pressure transducers and transmitters for both harsh and benign media with

More information

SSI Technologies Application Note PS-AN2 MediaSensor Absolute & Gage Pressure Transducers & Transmitters Product Overview

SSI Technologies Application Note PS-AN2 MediaSensor Absolute & Gage Pressure Transducers & Transmitters Product Overview Product Description The MediaSensor (P51) family of bulk micro-machined, absolute, gage and sealed pressure transducers and transmitters are for both harsh and benign media with the superior typical accuracy

More information

PRESSURE TRANSDUCERS. Specifications. Individual Specifications

PRESSURE TRANSDUCERS. Specifications. Individual Specifications GEMS COMPLIANT 00 Series and 00 Heavy Duty Series Compact OEM Pressure Transmitters 0 00 psi to 0-0,000 psi ranges (0- bar to 0-,00 bar) High Proof Pressures Broad Choice of Outputs RoHS Compliant For

More information

Selectable ranges and an LCD are a technician s best friend, that s why we make them standard on every dry media differential pressure sensor!

Selectable ranges and an LCD are a technician s best friend, that s why we make them standard on every dry media differential pressure sensor! PRESSURE SENSORS PRESSURE PDP3 Series 0-2 32 PDP3 Series 0-10, 0-25 34 PG Gauge Series 36 PW Wet-Wet Series (Cable Version) 38 PW Wet-Wet Series (Conduit Version) 40 PW Series Ordering Guidance 42 Selectable

More information

Type A-10 General Purpose Pressure Transmitters

Type A-10 General Purpose Pressure Transmitters Type A-10 General Purpose Pressure Transmitters Applications Mechanical engineering Machine tools Process control and automation Hydraulics and pneumatics Pumps and compressors Special Features Pressure

More information

Pressure Transmitter. Pressure transmitter with compact design Model EDC-K. Electronic. Applications. Special Features.

Pressure Transmitter. Pressure transmitter with compact design Model EDC-K. Electronic. Applications. Special Features. Pressure transmitter with compact design Electronic Pressure Transmitter Applications Mechanical engineering Machine tools Control and feedback control systems Hydraulics / Pneumatics Pumps/ Compressors

More information

M5200 Industrial Pressure Transducer

M5200 Industrial Pressure Transducer SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof Gage, Sealed, Compound The pressure

More information

OEM Pressure transmitter for industrial applications Type MBS Technical brochure

OEM Pressure transmitter for industrial applications Type MBS Technical brochure OEM Pressure transmitter for industrial applications Type MBS 1200 Technical brochure Features Designed for use in severe industrial OEM applications For medium and ambient temperatures up to 125ºC All

More information

Data Sheet P265 Stainless Steel Pressure Transducer

Data Sheet P265 Stainless Steel Pressure Transducer Data Sheet P265 Stainless Steel Pressure Transducer Main Features Pressure Ranges Electrical Connection 0 to 15 up to 0 to 1000 PSI Packard Electric Metri-Pack 150 Series, 12 20 AWG leads Pressure Connection

More information

P255 Stainless Steel Pressure Transducer

P255 Stainless Steel Pressure Transducer P255 Stainless Steel Pressure Transducer Description The model P255 is based on Kavlico s fieldproven ceramic capacitive technology with the latest state-of-the-art ASIC. Featuring a 316SS housing, the

More information

Pressure Sensor - EPT3100

Pressure Sensor - EPT3100 Pressure Sensor - EPT3100 Up to 4000 Bar pressure range High strength, rugged stainless steel design Competitively priced The EPT3100 is a high quality all stainless steel pressure transducer, intended

More information

OEM Pressure Transmitters for heavy-duty applications Type MBS 1200 and MBS 1250

OEM Pressure Transmitters for heavy-duty applications Type MBS 1200 and MBS 1250 Data sheet OEM Pressure Transmitters for heavy-duty applications Type MBS 100 and MBS 150 The compact OEM pressure transmitter programme is designed for use in severe hydraulic applications. The programme

More information

OEM Pressure Transmitters

OEM Pressure Transmitters OEM Pressure Transmitters Type MH-2 Applications Mobile hydraulic systems Automotive industry Compressor systems Special Features Pressure ranges from 1000 psi to 8000 psi 4-20 ma, 1-5V, 0-10V, 0.5-4.5V

More information

Data Sheet P255 Stainless Steel Pressure Transducer

Data Sheet P255 Stainless Steel Pressure Transducer Data Sheet P255 Stainless Steel Pressure Transducer Main Features Pressure Ranges Electrical Connection 0 to 15 up to 0 to 1000 PSI Packard Electric Metri-Pack 150 Series Pressure Connection 1/4-18 NPT

More information

MBS 1200 and MBS 1250

MBS 1200 and MBS 1250 Data sheet OEM Pressure Transmitters for heavy-duty applications MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic applications. The programme

More information

PX409 Series. mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-10 inh2o to psid

PX409 Series. mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-10 inh2o to psid Micro-Machined Silicon Transducers wet/dry differential mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-10 inh2o to 0-1000 psid PX409 Series Standard U 5-Point NIST Traceable

More information

Type A-10 General Purpose Pressure Transmitter

Type A-10 General Purpose Pressure Transmitter General Purpose TRONIC > General Purpose > A-10 Type A-10 General Purpose Pressure Transmitter Standard Features Signal output: 4-20 ma 2-wire or 0-10 V 3-wire Supply voltage: 8-30 DC (14-30 VDC) Process

More information

OEM Pressure Transmitters

OEM Pressure Transmitters OEM Pressure Transmitters Type ECO-1 Applications Hydraulics and pneumatics Mechanical engineering General industrial applications Special Features Pressure ranges from 0-15psi to 0...15,000psi 4-20 ma

More information

EQUIVALENT BASIC CIRCUIT

EQUIVALENT BASIC CIRCUIT FEATURES Reliable semiconductor technology Calibrated and temperature compensated Rugged, stainless steel package NEMA 4 design Small size Absolute, gage, sealed gage, vacuum gage pressures 0 psi to 3

More information

Data Sheet P1A Pressure Sensor

Data Sheet P1A Pressure Sensor Data Sheet P1A Pressure Sensor Main Features 0 to 0.25 up to 0 to 16 bar (gage) Pressure Ranges 0 to 1.6 up to 0 to 16 bar (absolute) -1 to 0 up to -1 to 0 bar (gage) * Electrical Connection Packard Electric

More information

Micro-Machined Silicon Transducers

Micro-Machined Silicon Transducers Micro-Machined Silicon Transducers wet/wet differential Pressure Models mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-10 inh2o to 0-1000 psid PX409 Series Standard U Precision

More information

PRESSURE BENCH OPERATING INSTRUCTIONS

PRESSURE BENCH OPERATING INSTRUCTIONS PRESSURE BENCH OPERATING INSTRUCTIONS Overview: The pressure bench system allows the user to apply a variety of calibrated pressures to a variety of high and low pressure transducers. In addition the system

More information

Pressure transmitters for heavy duty applications MBS 8200 and MBS 8250

Pressure transmitters for heavy duty applications MBS 8200 and MBS 8250 Data sheet Pressure transmitters for heavy duty applications MBS 8200 and MBS 8250 MBS 8200 is a series of compact pressure transmitters developed to withstand the pressure pulsations and vibrations known

More information

Mid-West Instrument. Series 700 "Wet/Wet" Installation and Operating Instructions. Differential Pressure Transmitter

Mid-West Instrument. Series 700 Wet/Wet Installation and Operating Instructions. Differential Pressure Transmitter Mid-West Instrument IM_700/A Series 700 "Wet/Wet" Installation and Operating Instructions Differential Pressure Transmitter 6500 Dobry Dr. Sterling Heights, MI USA Toll Free: 800-648-5778 Ph 586-254-6500

More information

Solid State Electronic Pressure Switch with Integral LED Display Model PSD-10

Solid State Electronic Pressure Switch with Integral LED Display Model PSD-10 Solid State Electronic Pressure Switch with Integral LED Display Model PSD-10 Electronic Pressure Measurement WIKA Datasheet PSD-10 Applications Hydraulics and pneumatics Filter monitoring Pump control

More information

Industrial Pressure Transmitters

Industrial Pressure Transmitters Industrial Pressure Transmitters Type S-10, S-11 Applications Hydraulics and pneumatics Test equipment Pump and compressor control Liquid level measurement Special Features Standard ranges available from

More information

Data Sheet P265 Stainless Steel Pressure Transducer

Data Sheet P265 Stainless Steel Pressure Transducer Data Sheet P265 Stainless Steel Pressure Transducer Main Features Pressure Ranges Electrical Connection 0 to 15 up to 0 to 1000 PSI Packard Electric Metri-Pack 150 Series, 12 20 AWG leads Pressure Connection

More information

P1A Pressure Sensor. Description. Features. Applications MAIN FEATURES

P1A Pressure Sensor. Description. Features. Applications MAIN FEATURES P1A Pressure Sensor Description P1A family features a highly modular compact geometry. This modularity and extensive range of options offered by the P1A family make the advantages of Ceramic Capacitive

More information

Data Sheet P4000 Hermetically Sealed Pressure Sensor

Data Sheet P4000 Hermetically Sealed Pressure Sensor Data Sheet P4000 Hermetically Sealed Pressure Sensor Main Features Pressure Ranges Electrical Connection Pressure Connection 0 to 100 up to 0 to 5000 PSI Packard Electric Metri-Pack 150 Series, Deutsch

More information

Data Sheet P4055 Pressure Transducer

Data Sheet P4055 Pressure Transducer Data Sheet P4055 Pressure Transducer Main Features Pressure Ranges Electrical Connection Pressure Connection Housing Material Output Signal 0 to 3 up to 0 to 300 PSI Packard Electric Metri-Pack 150 Series

More information

JUMO MIDAS S05 Pressure transmitter Type

JUMO MIDAS S05 Pressure transmitter Type Data Sheet 40.00 Page /8 JUMO MIDAS S05 Pressure transmitter Type 4000 Brief description The JUMO MIDAS S05 pressure transmitter is available with both relative pressure and absolute pressure measurement

More information

Ultra High Purity Transducer, Ex na nl Models WU-20, WU-25 and WU-26

Ultra High Purity Transducer, Ex na nl Models WU-20, WU-25 and WU-26 Electronic Pressure Measurement Ultra High Purity Transducer, Ex na nl Models WU-20, WU-25 and WU-26 WIKA Datasheet WU-2X Applications Gas panels for OEM tools Semiconductor, flat panel display and photovoltaic

More information

Pressure transmitter for general purpose Type MBS 1700 and MBS 1750

Pressure transmitter for general purpose Type MBS 1700 and MBS 1750 MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general purpose Type MBS 1700 and MBS 1750 The compact pressure transmitters MBS 1700 and MBS 1750 are designed for use as a general purpose

More information

Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050

Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050 Data sheet Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050 The compact heavy duty pressure transmitters MBS 2000 and MBS 2050 are designed for use in hydraulic applications. MBS

More information

SPT- I / U PRESSURE TRANSMITTER for general applications

SPT- I / U PRESSURE TRANSMITTER for general applications Fields of application Design Examples Hydraulics Air conditioning and heating Testing technology Industrial robots Process controlling Water technology Pneumatics Description The pressure transmitters

More information

UNIK Pressure Sensing Platform. GE Sensing & Inspection Technologies. Features

UNIK Pressure Sensing Platform. GE Sensing & Inspection Technologies. Features GE Sensing & Inspection Technologies UNIK 5000 Pressure Sensing Platform The UNIK 5000 is a high performance configurable solution to pressure measurement. The use of Druck silicon technology and analogue

More information

EB100 High Accuracy Miniature Pressure Transducer

EB100 High Accuracy Miniature Pressure Transducer Miniature design (body ø11 mm) High Accuracy EMI Protected per CE Compliance Wide Temperature Range Absolute DESCRIPTION The EB100 pressure transducer is the smallest design proposed by MEAS from the UltraStable

More information

Electronic Pressure Switches

Electronic Pressure Switches 96 Pressure Switches Electronic Pressure Switches Electronic E.5 switching output Electronic pressure switches, High-Performance series with one switching output Outstanding overpressure protection (up

More information

Mountable with O-ring seal Urea level ±0.5% Accuracy Urea pressure ±2.0 Total Error Band Air Brakes Corrosive fluid measurement for E&V applications

Mountable with O-ring seal Urea level ±0.5% Accuracy Urea pressure ±2.0 Total Error Band Air Brakes Corrosive fluid measurement for E&V applications Mountable with O-ring seal Stainless Steel wetted surfaces Amplified ASIC calibrated Absolute, sealed gage Cable option Analog output DESCRIPTION The U86B is a small profile, media compatible, piezoresistive

More information

MS4525 SPECIFICATIONS

MS4525 SPECIFICATIONS SPECIFICATIONS PCB Mounted Pressure Transducers Amplified Ratiometric Analog Output Differential, Gage, Absolute, Compound, & Vacuum Temperature Compensated 3.3 or 5.0 Vdc Supply Voltage The MS4525 is

More information

Electronic Pressure Switches

Electronic Pressure Switches 96 Pressure Switches Electronic Pressure Switches Electronic E.6 2 switching outputs Electronic pressure switches, High-Performance series with two switching outputs Outstanding overpressure protection

More information

P500 Pressure Sensor. Description. Features. Applications MAIN FEATURES

P500 Pressure Sensor. Description. Features. Applications MAIN FEATURES P500 Pressure Sensor Description The P500 incorporates Kavlico s 4th generation ceramic capacitive sense element with the latest state of the art proprietary ASIC. Available in brass or stainless steel

More information

TURCK Inc Campus Drive Minneapolis, MN Application Support: Fax: (763) M2

TURCK Inc Campus Drive Minneapolis, MN Application Support: Fax: (763) M2 Process INSTRUMENTATION TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com M2 TURCK Process Instrumentation Pressure Selection Guide

More information

Pressure sensor for liquid and gaseous media QBE620-P...

Pressure sensor for liquid and gaseous media QBE620-P... 1 904 Pressure sensor for liquid and gaseous media QBE620-P... Pressure sensor for the measurement of positive pressure in HVAC applications. Piezo-resistive system of measurement DC 0...10 V output signal

More information

DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor

DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 bar up to 0... 600

More information

By Karmjit Sidhu, VP, Business Development American Sensor Technologies

By Karmjit Sidhu, VP, Business Development American Sensor Technologies New Differential Pressure Sensor Incorporates LVDT Technology to Create More Environmentally-Resistant, Dependable and Economical Pressure Sensing Solution By Karmjit Sidhu, VP, Business Development American

More information

0 to 100 up to 0 to PSI (gage) Packard Electric Metri-Pack 150 Series, M12-4 Pole* 1/4-18 NPT ma, VDC, 0-5 VDC, 0-10 VDC

0 to 100 up to 0 to PSI (gage) Packard Electric Metri-Pack 150 Series, M12-4 Pole* 1/4-18 NPT ma, VDC, 0-5 VDC, 0-10 VDC Data Sheet PTA5000 Hermetically Sealed Modular Pressure Sensor Main Features Pressure Ranges Electrical Connection Pressure Connection 0 to 100 up to 0 to 10.000 PSI (gage) Packard Electric Metri-Pack

More information

MS4515 SPECIFICATIONS FEATURES APPLICATIONS

MS4515 SPECIFICATIONS FEATURES APPLICATIONS . SPECIFICATIONS PCB Mounted Pressure Transducers Pressure Ranges from 2 to 30 inches H 2O Amplified Ratiometric Analog Output Differential & Gage Temperature Compensated 3.3V or 5.0 V DC Supply Voltage

More information

OEM pressure transmitter with thin-film technology For mobile hydraulics Model MH-2

OEM pressure transmitter with thin-film technology For mobile hydraulics Model MH-2 Electronic pressure measurement OEM pressure transmitter with thin-film technology For mobile hydraulics Model MH-2 WIKA data sheet PE 81.37 Applications Load monitoring Load moment limitation Hydraulic

More information

OBSOLETE. Data Sheet P1E Oxygen Service Pressure Sensor. Main Features. Typical Applications. Attributes. Description

OBSOLETE. Data Sheet P1E Oxygen Service Pressure Sensor. Main Features. Typical Applications. Attributes. Description Data Sheet P1E Oxygen Service Pressure Sensor Main Features Pressure Ranges Electrical Connection Pressure Connection 6 bar up to 400 bar (gage)* M12-4 Pole, 18mm connector, 9.4mm connector* G1/4A DIN

More information

PXT-K Series. Pressure Transmitters Section 05

PXT-K Series. Pressure Transmitters Section 05 PXT-K Series Pressure Transmitters 00-02-0840 Section 05 This Murphy instrument is susceptible to damage when exposed to static electrical changes. To avoid this damage, observe the following: Disconnect

More information

CANADA SENSORS TECHNOLOGY INC.

CANADA SENSORS TECHNOLOGY INC. CANADA SENSORS TECHNOLOGY INC. Manufacturer of Advanced Technology Pressure & Level Transmitters LIQUID LEVEL TRANSMITTER PROCESS 10 HART Enabled Intrinsically Safe Model Submersible Pump Lift Station

More information

DL 01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05

DL 01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05 DL 0 Battery Powered for Leak Testing Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless

More information

SSI Technologies Application Note PS-AN7 MediaGauge (Model MG-MD) Digital Pressure Gauge Product Overview

SSI Technologies Application Note PS-AN7 MediaGauge (Model MG-MD) Digital Pressure Gauge Product Overview Product Description The MediaGauge MG-MD is a multi-functional digital pressure gauge consisting of a media isolated piezoresistive pressure sensing element, signal conditioning circuitry for temperature

More information

CTE9000 / CTU9000 Series OEM pressure transmitters for industrial media

CTE9000 / CTU9000 Series OEM pressure transmitters for industrial media FEATURES mbar to 35 bar, 15 to 500 psi gage 1 or absolute 10 pressure 05, 010, 0545, 16 or 420 ma output Field interchangeable All welded stainless steel diaphragm construction EMC according to EN 61326-1

More information

Pressure transmitter for industrial applications Type MBS 4500

Pressure transmitter for industrial applications Type MBS 4500 MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4500 The high accuracy pressure transmitter MBS 4500 is designed for use in almost all industrial applications,

More information

Pressure transmitter for general industrial purposes MBS 3000 and MBS 3050

Pressure transmitter for general industrial purposes MBS 3000 and MBS 3050 Data sheet Pressure transmitter for general industrial purposes MBS 3000 and MBS 3050 The compact pressure transmitter, type MBS 3000, is designed for use in almost all industrial applications, and offers

More information

UNIK 5800/5900. Flameproof/Explosion-Proof Pressure Sensing Platform. GE Measurement & Control. High Quality. Features. Bespoke as Standard.

UNIK 5800/5900. Flameproof/Explosion-Proof Pressure Sensing Platform. GE Measurement & Control. High Quality. Features. Bespoke as Standard. GE Measurement & Control UNIK 5800/5900 Flameproof/Explosion-Proof Pressure Sensing Platform The 5800 and 5900 are compact and rugged versions of the high performance UNIK 5000 pressure sensing platform

More information

EPI Applications. Features

EPI Applications. Features EPI 887 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The industrial

More information

Pressure transmitter for industrial applications Type MBS 4510

Pressure transmitter for industrial applications Type MBS 4510 MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4510 The high accuracy flush diaphragm pressure transmitter MBS 4510 is designed for use in non-uniform,

More information

Ultra High Purity Transducer, Ex na ic Models WUC-10, WUC-15 and WUC-16

Ultra High Purity Transducer, Ex na ic Models WUC-10, WUC-15 and WUC-16 Electronic Pressure Measurement Ultra High Purity Transducer, Ex na ic Models WUC-10, WUC-15 and WUC-16 WIKA Datasheet WUC-1X Applications Semiconductor, flat panel display and photovoltaic industry Specialty

More information

Pressure transmitter for general industrial purposes Type MBS 3000 and MBS 3050

Pressure transmitter for general industrial purposes Type MBS 3000 and MBS 3050 MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general industrial purposes Type MBS 3000 and MBS 3050 The compact pressure transmitter, type MBS 3000, is designed for use in almost all

More information

CTE7000 / CTU7000 Series Miniature pressure transmitters

CTE7000 / CTU7000 Series Miniature pressure transmitters FEATURES 10 mbar to bar, 0.1 to 7 psi gage 1 pressure 0..., 0...10, 0...4., 1...6 or 4...20 ma output Field interchangeable Rugged stainless steel housing EMC according to EN 61326-1 9 MEDIA COMPATIBILITY

More information

Thermal hysteresis 0.5% max. of full scale (within compensated temperature range) 1% max. for ranges mbar mbar mbar

Thermal hysteresis 0.5% max. of full scale (within compensated temperature range) 1% max. for ranges mbar mbar mbar Pressure Transmitter Type FM40466 General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The measuring device for the transmitter

More information

ABB Instrumentation. 50T Series Transmitters Model 54G/A gauge/absolute pressure transmitter for sanitary use. Specification sheet

ABB Instrumentation. 50T Series Transmitters Model 54G/A gauge/absolute pressure transmitter for sanitary use. Specification sheet Specification sheet 50T Series Transmitters Model 54G/A gauge/absolute pressure transmitter for sanitary use Ranges : - 100 to 4000 kpa - 1 to 40 bar - 14.5 to 600 psi Base accuracy : 0.2%(BFSL) Piezoresistive

More information

Pressure transmitters for heavy duty applications MBS 3200 and 3250

Pressure transmitters for heavy duty applications MBS 3200 and 3250 Data sheet Pressure transmitters for heavy duty applications MBS 3200 and 3250 The compact high temperature pressure transmitter MBS 3200 is designed for use in hydraulic and almost all industrial applications,

More information

Ultra High Purity Transducer, Ex na n Models WUC-10, WUC-15 and WUC-16

Ultra High Purity Transducer, Ex na n Models WUC-10, WUC-15 and WUC-16 Electronic Pressure Measurement Ultra High Purity Transducer, Ex na n Models WUC-10, WUC-15 and WUC-16 WIKA Datasheet WUC-1X Applications Semiconductor, Flat Panel Display and Photovoltaic Industry Specialty

More information

Model DCT Digitally Compensated Pressure Transducer

Model DCT Digitally Compensated Pressure Transducer EPMP 1 Product ata ELECTRONIC PRESSURE MESUREMENT PROUCTS Model CT igitally Compensated ESCRIPTION The Model CT is designed for general industrial and commercial requirements offering excellent performance

More information

Pressure measurement PP20H Fully welded hygienic pressure sensor with flush membrane

Pressure measurement PP20H Fully welded hygienic pressure sensor with flush membrane Product highlights All market typical hygienic connections available EHEDG & 3-A certified versions available Condensate-proof measuring cell IO-Link available Space-saving installations from DN 25 on

More information

BTE2000 / PTE2000 Series Precision stainless steel pressure transmitters

BTE2000 / PTE2000 Series Precision stainless steel pressure transmitters FEATURES...5 to...5 bar,...5 to...5 psi gage 1 For corrosive media in harsh environments 1...6 or... ma output Field interchangeable All welded stainless steel diaphragm construction MEDIA COMPATIBILITY

More information

Pressure transmitters for industrial applications Type MBS 4510

Pressure transmitters for industrial applications Type MBS 4510 Pressure transmitters for industrial applications Type MBS 4510 Technical brochure Features Designed for use in severe industrial environments Enslosure and wetted parts of acid-resistant stainless steel

More information

FEATURES AND BENEFITS

FEATURES AND BENEFITS DESCRIPTION Honeywell Zephyr Digital Airflow Sensors: HAF Series-High Accuracy, provide a digital interface for reading airflow over the specified full scale flow span and temperature range. Their thermally

More information

Pressure Transmitter for wind turbine applications MBS 8200 and MBS 8250

Pressure Transmitter for wind turbine applications MBS 8200 and MBS 8250 Data sheet Pressure Transmitter for wind turbine applications MBS 8200 and MBS 8250 MBS 8200 is a series of compact pressure transmitters developed to withstand the pressure pulsations and vibrations known

More information

High temperature pressure transmitters for heavy-duty applications MBS 2200 and MBS 2250

High temperature pressure transmitters for heavy-duty applications MBS 2200 and MBS 2250 Data sheet High temperature pressure transmitters for heavy-duty applications MBS 2200 and MBS 2250 The compact heavy duty pressure transmitter type MBS 2200 and MBS 2250 are designed for use in severe

More information

DM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05

DM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05 Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø

More information

DCT 533. Industrial Pressure Transmitter with IO-Link Interface. Stainless Steel Sensor

DCT 533. Industrial Pressure Transmitter with IO-Link Interface. Stainless Steel Sensor DCT 5 Industrial Pressure Transmitter with IO-Link Interface Stainless Steel Sensor accuracy according to IEC 60770: standart: ± 0.5 % FSO sption: ± 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0...

More information

DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm

DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals

More information

JUMO MIDAS Pressure transmitter

JUMO MIDAS Pressure transmitter Phone: +44 19 635533 Fax: +44 19 6356 Data Sheet 401001 Page 1/5 JUMO MIDAS Pressure transmitter Brief description Pressure transmitters are used for measuring the relative (gauge) pressure in liquids

More information

DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor

DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 40

More information

Type E-10, E-11 Hazardous Area Explosion-proof Transmitters

Type E-10, E-11 Hazardous Area Explosion-proof Transmitters Electronic Pressure Catalog > Hazardous Area > E-10, E-11 Type E-10, E-11 Hazardous Area Explosion-proof Transmitters Meets ANSI / ISA 12.27.01-2003 single seal requirements - no dual seal required Applications

More information

DMP 331 DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial

DMP 331 DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial TEMATEC GmbH Postal address: House address Fon (+49) 0 4-870-0 Postbox 6 Löhestr. 7 Fax (+49) 0 4-870-0 http: // www.tematec.de 5759 Hennef 577 Hennef e-mail: team@tematec.de TEMATEC GmbH Data Sheet DMP

More information

PRESSURE SENSORS CPS 1184 CPS 2184 SPS 1000 Z SPS 3003 LEADING IN SENSORS

PRESSURE SENSORS CPS 1184 CPS 2184 SPS 1000 Z SPS 3003 LEADING IN SENSORS PRESSURE SENSORS CPS 1184 CPS 2184 SPS 1000 Z SPS 3003 LEADING IN SENSORS 2 LEADING IN SENSORS TRUST THE X! Fair partnership and customer-specific solutions. Every single one of our premium products offers

More information

PRESSURE SENSORS First in sensors

PRESSURE SENSORS  First in sensors PRESSURE SENSORS First IN SENSORS 2 First IN SENSORS TRUST THE X! Welcome to Metallux USA, Inc. Metallux USA, Inc. is the sole distributor of products for Metallux AG in Germany. A company that is internationally

More information

U.S. GAUGE PMT PRODUCTS 820 PENNSYLVANIA BLVD., FEASTERVILLE, PENNSYLVANIA U.S.A. TEL: (215) FAX: (215)

U.S. GAUGE PMT PRODUCTS 820 PENNSYLVANIA BLVD., FEASTERVILLE, PENNSYLVANIA U.S.A. TEL: (215) FAX: (215) U.S. GAUGE PMT PRODUCTS 820 PENNSYLVANIA BLVD., FEASTERVILLE, PENNSYLVANIA 19053 U.S.A. TEL: (215) 355-6900 FAX: (215) 354-1801 www.ametekusg.com 2009, by AMETEK, Inc. All rights reserved. Printed in the

More information

Pressure Transmitters

Pressure Transmitters Transmitters Wetted parts are all made of stainless steel for high resistance to chemicals Stainless steel diaphragm welded with casing No seals and thus low leakage rate even with difficult gases High

More information

Pressure Transmitter JUMO dtrans p30 Type

Pressure Transmitter JUMO dtrans p30 Type Data Sheet 40466 Page 1/6 Pressure Transmitter JUMO dtrans p0 Type 40466 General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The

More information

Data Sheet P6000 Remote Mount Miniature Pressure Sensor

Data Sheet P6000 Remote Mount Miniature Pressure Sensor Data Sheet P6000 Remote Mount Miniature Pressure Sensor Main Features Electrical Connection Pressure Connection Housing Material Output Signal 0 to 2.5 up to 0 100 PSI and 0 to 200 mbar up to 0 to 7 Bar

More information

TE CONNECTIVITY SENSORS /// WIND TURBINES SENSOR SOLUTIONS FOR WIND TURBINES FROM TE CONNECTIVITY

TE CONNECTIVITY SENSORS /// WIND TURBINES SENSOR SOLUTIONS FOR WIND TURBINES FROM TE CONNECTIVITY TE CONNECTIVITY SENSORS /// WIND TURBINES SENSOR SOLUTIONS FOR WIND TURBINES FROM TE CONNECTIVITY SENSOR SOLUTIONS FOR WIND TURBINES FROM TE CONNECTIVITY TE Connectivity (TE) is a global designer and manufacturer

More information

DMP 331P DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm

DMP 331P DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Industrial

More information

Pressure transmitter for marine applications MBS 33M

Pressure transmitter for marine applications MBS 33M Data sheet Pressure transmitter for marine applications MBS 33M The standard pressure transmitter MBS 33M is designed for use in almost all marine applications, and offers a reliable pressure measurement,

More information

ECT Applications. Features

ECT Applications. Features Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The economical pressure

More information

Airflow, Force and Pressure Sensors Product Range Guide

Airflow, Force and Pressure Sensors Product Range Guide Airflow, Force and Pressure Sensors Product Range Guide For innovation that s well apart, there s only Honeywell. With more than 50,000 products ranging from snap-action, limit, toggle, and pressure switches

More information

Features. Pressure & temperature combined. Sub miniature and light sensor. Temperature output. Built-in electronic Vdc

Features. Pressure & temperature combined. Sub miniature and light sensor. Temperature output. Built-in electronic Vdc Sub-Miniature Pressure and Temperature Transducer Features Pressure & temperature combined Sub miniature and light sensor Temperature output Built-in electronic 0.5-4.5Vdc Applications Automotive - on

More information

Pressure transmitter for air and water applications Type MBS 1900

Pressure transmitter for air and water applications Type MBS 1900 Data sheet Pressure transmitter for air and water applications Type MBS 1900 The pressure transmitter MBS 1900 is designed for use in air and water applications like Booster Pumps and Air Compressors.

More information

Relative pressure transmitter type 522 for shipbuilding

Relative pressure transmitter type 522 for shipbuilding Relative pressure transmitter type 522 for shipbuilding Pressure range 0... 2.5 600 bar The compact type 522 pressure transmitter for shipbuilding is based upon the Huba Control developed thick film technology

More information

CTE8000 / CTU8000 Series

CTE8000 / CTU8000 Series CTE8000 / CTU8000 Series FEATURES 250 mbar to 100 bar, 5 to 1500 psi gage1 or absolute10 pressure 0...5 V, 0...10 V or 4...20 ma output Field interchangeable For many industrial gases and liquids EMC according

More information