Quick Reference Guide 1.5 mm AMP Mini CT Connector Series
|
|
|
- Luke Lee
- 6 years ago
- Views:
Transcription
1 Quick Reference Guide The AMP Mini CT connectors are miniature wire-to-board and wire-to-wire connectors. Like the standard AMP CT connector series, these connectors are tailored for improved harness productivity and feature a compact design with contacts on 1.5 mm pitch. Wire-side connectors can be used to produce a variety of harness styles by fully automatic high-speed assembling machines. FEATURES AND BENEFITS 2 kinds of termination method: IDC, crimp Discrete wire interconnect Circuits range from 2-20 single row, dual row AWG 24~28 Both T/H and SMT mounting styles are available Kinks for self-retention on boards Many components are recognized under the component program of Underwriters Laboratories Inc., file No. E28476 Certified by Canadian Standards Association, File No. LR 7189 PRODUCT APPLICATIONS Business equipment Industrial machines PC, Printer and Fax C-TV Audio Air conditioner Routed power & signals LED lighting controls Indoor & outdoor lighting LED illumination
2 How to select an AMP Mini CT connector part number The charts on this page highlight the relationship between the number of contacts (positions) to the part number. Please see the sample chart below that was designed to help you select the correct part number for your needs. For single digit position to dash numbers, attach the digit to the end base number. For double digit position to dash numbers, attach the first digit to the front of the part number, add a dash and the base part number, then follow the base part number with a dash and the second digit. Example Base Part Number Your Criteria Example Position to Dash Selection End Part Number Based on Criteria Position You require and 8 position MT housing Dash Number You require and 12 position MT housing Dash Number Mass Termination (MT) VS. Crimp Poke MT Time savings Preloaded IDC contacts Automation Mates with all headers Crimp Poke Cost effective Flexibility (AWG) Manual labor Mates with all headers MT AMP Mini CT Housing : Crimp AMP Mini CT Contact : Crimp AMP Mini CT Housing : Unstripped wires inserted into MT housing. Contact crimped onto a stripped wire to be inserted into a crimp housing. Cable Side Connectors RECEPTACLE CONNECTORS (WIRE APPLICATION) MT receptacle housing - AWG : A Mating Part Numbers: ; ; ; ; ; ; ; ; Specifications: C, X CONTACTS Description PN Photo Specifications Reel-AWG: B B,Y Loose Piece - AWG: B B,Y CRIMP TYPE HOUSING Crimp receptacle housing - White C Mating Part Numbers: ; ; ; ; ; ; ; ; Specifications: B Cable Side Connectors : Tooling Options APPLICATION TOOLING AMP Mini CT PN Description Tooling PN Tooling Description Application Specification Instruction Sheet MT Housing Pistol Tool Crimp Contact - Strip Leadmaker Applicator Bench Application Crimp Contact - Loose Hand Tool * Applicators listed are used in the AMP-O-LECTRIC Model G, AMP 3K/40 and AMP 5K/40 Terminators. Call the Tooling Assistance Center at for applicator numbers for Automatic Cut, Strip and Terminate Leadmakers. ** Power tooling options are also available. Call Tooling Sales at ( ) for more information
3 Photo Key Dual Row Assemblies A B C D E F Solder Pad G H I Locating Boss J K L Dual Row Assemblies Two single row receptacle housings, either MT M N O or crimp, that use a holder to mate with a dual row header. Solder Pad Designed to secure the SMT headers onto the PCB Locating Boss A mechanical feature that helps orientate the headers onto the PCB.
4 SINGLE ROW POST HEADER ASSEMBLIES : BOARD-MOUNT T/H Type Horizontal-Mount Type, w/o Boss D T/H Type Vertical-Mount Type, w/ Boss E SMT Type Horizontal-Mount Type, w Boss F SMT Type Horizontal-Mount Type, w/o Boss G SMT Type Vertical-Mount Type, w Boss H SMT Type Vertical-Mount Type, w/o Boss I Mating Part Numbers: (MT) or (Crimp) w/ or Specifications: A, X SINGLE ROW POST HEADER ASSEMBLIES : PANEL-MOUNT Single Row Panel-Mount J Mating Part Numbers: (MT) or (Crimp) w/ or Specifications: A, X DUAL ROW HEADERS Receptacle Housing Connector Mounting Holder K Note: Two receptacle housings are applied per holder and one holder per dual row header Mating Part Numbers: 2 x (MT) or 2 x (Crimp) w/ or Specifications: C, X DUAL ROW POST HEADER ASSEMBLIES : BOARD-MOUNT Dual Row T/H Type/ Vertical-Mount L Dual Row SMT Type/ Vertical Mount Type w/boss M Dual Row T/H Type/ Horizontal Mount w/ Board Lock N Mating Part Numbers: w/ 2 x MT or 2 x Crimp Single Row Housings Specifications: A, C, X DUAL ROW POST HEADER ASSEMBLIES : PANEL-MOUNT Description PN Position to Dash Dual Row Panel-Mount Mating Part Numbers: w/ 2 x MT or 2 x Crimp Single Row Housings Specifications: C, X 4 Panel-Mount Transmits signal through a notch in a panel or a PCB and requires two housings to complete a circuit. 5 SMT Inverted Thru Board Positioned thru a cutout or notch in a PCB and requires only one housing to complete a circuit. The innovative design eliminates wire dress management issues. INVERTED THRU BOARD SMT Type Thru Board O Mating Part Numbers: MT or crimp w/ or Specifications: D, Z 4 5 MINI CT CABLE ASSEMBLY Description PN Position to Dash Cable Assembly
5 Product/Application Specification RATINGS Operating Current (Amps) Product Specs Voltage 24 AWG 26 AWG 28 AWG 30 AWG Temperature A V (AC/DC) to 105 C B V (AC/DC) to 105 C C V AC to 105 C Application Specs X Y Z D V (AC/DC) to 105 C AMP Mini CT Mount Styles Crimp Receptacle Housing SMT R/A Header SMT Vertical Header Dual Row T/H R/A Header SMT Inverted Thru-Board Dual Row T/H Vertical Header IDC Receptacle Housing T/H R/A Header T/H Vertical Header Panel Mount Header AMP Mini CT Design Kits* Design Kits PN Description AMP Mini CT T/H Deluze Vertical and Right Angle Kit AMP MIni CT T/H Vertical Header Kit AMP Mini CT T/H Right Angle Header Kit AMP Mini CT SMT Deluxe Vertical and Right Angle Kit AMP Mini CT SMTVertical Header AMP Mini CT SMT Right Angle Kit AMP Mini CT Deluxe T/H and SMT Vertical and Right Angle Kit AMP Mini CT Deluxe T/H Vertical and Right Angle Kit AMP Mini CT Deluxe SMT Vertical and Right Angle Kit *Design kits are designed and assembled by Waldom and are available for purchase through your local distribution channel.
6 Frequently asked questions What wire gauge will you be using? There is more flexibility with AWG when using Crimp (24~28 AWG) vs. MT (26~28 AWG). What special retention mechanisms are available to provide stability? The TE T/H headers have a staggered tine design to provide stability. Are the connectors available for IDC? Yes, we offer an MT version that is preloaded with IDC contacts. Is your process automated? MT housings are suitable for automated processes. What are my tooling options? TE offers comprehensive tooling options including manual pistolgrips, manual mini-press, pneumatic mini-press, semi-auto DECAM and an automatic DECAM tool. For more information, please visit What current, voltage and operating temperature is required? Please see product specification information on the charts on page 3 of this document. Which is a more standard header, with or without a locating boss? The most standard headers tend to have a locating boss as it makes it easier for the customer to align the connector onto their board. What if my application is constrained for space with the 1.5 mm Mini CT? TE continues to develop and design interconnects that meet the needs of miniaturized applications. If your application is contrained for space, browse our HPI products at Does TE offer pre-made cable assemblies? Yes, we do offer single ended Mini CT pigtails in various lengths often used in lighting applications. Please reference part number FOR MORE INFORMATION TE Technical Support Center USA: +1 (800) Canada: +1 (905) Mexico +52 (0) Latin/S. America: +54 (0) Germany: +49 (0) UK: +44 (0) France: +33 (0) Netherlands: +31 (0) China: +86 (0) Part numbers in this brochure are RoHS Compliant*, unless marked otherwise. *as defined te.com 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company. All Rights Reserved CIS LUG PDF 1/2012 AMP, AMP-O-LETRIC, AMP 3/K-40, AMP 5/K-40, DECAM, TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this brochure are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.
Quick Reference Guide AMP CT Connector Series
Quick Reference Guide The AMP CT connectors are a miniature wire-to-board and wire-to-wire interconnect solution. The AMP CT connector series has proven performance in its harness making capability. A
Quick Reference Guide Euro Style Terminal Blocks
Quick Reference Guide Euro Style terminal block connectors feature various wire termination methods including rising cage clamp, wire protector, spring, IDC and crimp snap. The design of terminal block
ECONOMY POWER 2.5 CONNECTORS
ECONOMY POWER 2.5 CONNECTORS The Economy Power 2.5 (EP 2.5) connector is a single row or dual row crimp connector system. Based on a 2.5mm (0.098 ) centerline pitch, it is a very compact solution. EP 2.5
Quick Reference Guide Green Pushbutton and Toggle Series Switches
Quick Reference Guide Green Pushbutton and Toggle Series Switches The Green Series switch offering includes both pushbutton and toggle switches all rated to 6A/3A@125/250VAC and 4A@28VDC. The life expectancy
HYDRAULIC CRIMP TOOLING SOLUTIONS
HYDRAULIC CRIMP TOOLING SOLUTIONS A Comprehensive Guide to TE Hydraulic Tooling Solutions Hydraulic Powered Crimp Tooling for 10,000 psi FAST FACTS Industry standard 10,000 psi hydraulic system pumps and
Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
TE S RAYCHEM RSTI-CC-58 SCREENED, SEPARABLE COUPLING SYSTEM
Industry photo: should be a the same image as larger industry photo. Either a different crop or different angle. industry photo. This image and the one above should be different versions of the same photo
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
Station Post Insulators
TE Energy covers a wide range of polymeric, porcelain and hybrid insulators. For decades these products have demonstrated reliable performance in various types of applications all over the world. TE s
Application Specification.062 Diameter Pin and Socket Contacts and Housings 21 MAR 11 Rev E
Application Specification.062 Diameter Pin and Socket 114-1013 Contacts and Housings 21 MAR 11 Rev E i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in
LITHIUM-ION BATTERY POWERED CRIMP TOOLS
LITHIUM-ION BATTERY POWERED CRIMP TOOLS COMPLETELY PORTABLE POWER CRIMPING INTRODUCTION TO SOLUTIONS TE Connectivity. A Leader in Crimp Quality. Anyone can make a tool to crimp terminals onto a wire. But
MIL-DTL SERIES III CONNECTORS RUGGED, HARSH ENVIRONMENT SUBMINIATURE CONNECTORS
QUICK REFERENCE GUIDE Wide Range Mil spec, commercial, and composite Full line of finishes, including black zinc nickel and PTFE nickel High Performance Environmentally sealed DEUTSCH MIL-DTL-38999 SERIES
Connector for Internal Serial Transmission. FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-2 October 2008 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
TH 025 CONNECTOR SERIES
TH 025 CONNECTOR SERIES for the Automotive Industry TE AUTOMOTIVE /// TH 025 CONNECTOR SERIES TH 025 CONNECTOR SERIES for the Automotive Industry High density in limited spaces Product Features n TH 025
PREMIUM QUALITY MANUFACTURING OF CRIMP CONNECTIONS AMP 3K, 5K, GII AND GII + TERMINATORS
PREMIUM QUALITY MANUFACTURING OF CRIMP CONNECTIONS AMP 3K, 5K, GII AND GII + TERMINATORS AMP-O-LECTRIC GII Terminator Safety first. Improved guarding on the Model G II terminator provides open access for
3M Assembly Equipment
M Assembly Equipment M TM Presses and Accessories All M TM Assembly Presses are designed to provide proper assembly on M TM Cable and Connectors. These presses, along with a locator plate, achieve accurate
PREMIUM QUALITY MANUFACTURING OF CRIMP CONNECTIONS AMP 3K, 5K, GII AND GII + TERMINATORS
PREMIUM QUALITY MANUFACTURING OF CRIMP CONNECTIONS AMP 3K, 5K, GII AND GII + TERMINATORS AMP-O-LECTRIC GII Terminator Safety first. Improved guarding on the Model G II terminator provides open access for
Connector for Internal Serial Transmission FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-4 June 2013 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
IMPACT Backplane Connector System
IMPT ackplane onnector System isclaimer While T has made every reasonable effort to ensure the accuracy of the information in this catalog, T does not guarantee that it is error-free, nor does T make any
Standard Timer Connectors
Standard Timer Connectors Application Specification 114-49003 22 FEB 12 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
Picoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
SRC SERIES. Signal Connectors with bayonet locking system. Derived from VG95234 & in accordance with the NF F standard
SERIES Signal Connectors with bayonet locking system Derived from VG9523 & in accordance with the NF F 61-030 standard SERIES /// SIGNAL CONNECTORS Contents Main Characteristics... 2 Synoptic...3- Synoptic:
CMC/CPP/CMB SERIES. Power & signal connectors with screw locking system. Human photo. Can be environmental/ documentaty style or portrait of engineer.
Human photo. Can be environmental/ documentaty style or portrait of engineer. CMC/CPP/CMB SERIES Power & signal connectors with screw locking system CMC/CPP/CMB SERIES /// POWER & SIGNAL CONNECTORS Contents
AMPLIMITE* HDP- 20 and Economy
AMPLIMITE* HDP- 20 and Economy Application Specification Crimp Snap Subminiature D 114-40030 Commercial s 05 MAY 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].
Series 110 MK III, Series 187 MK II and MK III, Series 250 MK II, MK III, and RAST 5 & 7
Series 110 MK III, Series 187 MK II and MK III, Series 250 MK II, MK III, and RAST 5 & 7 Application Specification 114-2074 13 JAN 17 Rev L All numerical values are in metric units [with U.S. customary
Mechanical Connectors, Lugs and Repair Sleeves for Medium Voltage Cable Accessories up to 42 kv
Mechanical Connectors, Lugs and Repair Sleeves for Medium Voltage Cable Accessories up to 42 kv Mechanical Connectors, Lugs and Repair Sleeves for Medium Voltage Cable Accessories up to 42 kv Features
FASTON* 110 Series. Receptacle With F Crimp Insulation Support Barrel. Wire Barrel. Insulation Support Barrel. Figure 1
FASTON* 110 Series Application Specification Flag Receptacles with F Crimp Feature 03 SEP 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are
Infinite F50 family INNOVATIVE EIGHT CHANNEL ABSORBANCE READERS WITH ADVANCED LED TECHNOLOGY. 21 CFR Part 11* 98/79/EC IVD-D*
Infinite F50 family INNOVATIVE EIGHT CHANNEL ABSORBANCE READERS WITH ADVANCED LED TECHNOLOGY 21 CFR Part 11* 98/79/EC IVD-D* 02 Innovative. Sustainable. Smart The Infinite F50 is Tecan s next generation,
Economy Power (EP) 2.5 Contacts; Plug and Receptacle Housings; and Vertical and Right-Angle Headers
Economy Power (EP) 2.5 Contacts; Plug and s; and Vertical and Right-Angle Headers Application Specification 114-13315 09 JUN 17 Rev G NOTE All numerical values are in metric units [with U.S. customary
POWER TRIPLE LOCK* Connector System
POWER TRIPLE LOCK* Connector System Application Specification 114-106118 23 MAY 18 Rev J NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.
RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
RoHS. Sensor Technologies. for the Automotive Industry. Ready
RoHS Ready Sensor Technologies for the Automotive Table of Contents Highlights 2 3 Sensor Innovations 4 6 3 3 3 3 3 Brake Sensors Introduction 7 3 8 10 Clutch Introduction 11 12 15 3 Engine / E-Motor Introduction
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
Power Double Lock Connector System
Power Double Lock Connector System Application Specification 114-5175 26 AUG 18 Rev M NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
2. Use Extraction Tool (contact extraction tool). Insert releasing tip into the REAR of the. cavity between the spring and center wall of the
Twin Leaf PC Board Edge Connectors are designed for wire to pc board applications. To meet specific circuit requirements, housings are supplied (1) to be assembled using contacts, retaining springs, and
BH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
Data Sheet P6000 Remote Mount Miniature Pressure Sensor
Data Sheet P6000 Remote Mount Miniature Pressure Sensor Main Features Electrical Connection Pressure Connection Housing Material Output Signal 0 to 2.5 up to 0 100 PSI and 0 to 200 mbar up to 0 to 7 Bar
Application Specification Circular Plastic Connector (CPC) Series 45 System 05 AUG 14 Rev D
Application Specification Circular Plastic Connector (CPC) 114-13137 Series 45 System 05 AUG 14 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
JUL 14 Rev B
Power Triple Lock (PTL) Connector System Application Specification 4-068 2 JUL 4 Rev B NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.
VAL-U-LOK* Series Headers, Connectors, and TPA Accessories
VAL-U-LOK* Series Headers, Connectors, and TPA Accessories Application Specification 114-13172 30 NOV 17 Rev W1 NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
CONNECTING THE FUTURE. Interconnect Lighting Solutions
CONNECTING THE FUTURE Interconnect Lighting Solutions HIROSE WIRE-TO-BOARD CONNECTORS Hirose s interconnect products offer innovation, versatility and low profiles for your LED engineered designs. With
AMPLIMITE Cable Connector Accessories
MPLIMITE Cable Connector ccessories Quick Reference Guide We offer one of the broadest, most versatile portfolios of Dsubminiature connectors in the market with unrivaled engineering support to address
MICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708
FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to
FASTON* High Temperature Tab Terminals
FASTON* High Temperature Tab Terminals Application Specification 114-2097 24 AUG 11 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
M Series Pin and Socket Connectors Catalog Revised 3-01
M Series Connectors Product Facts Most connectors intermateable with connectors made to MIL-C-28748 requirements Wide range of connector styles and sizes: standard c o n n e c t o r s (unloaded), posted
MAGNET WIRE TERMINALS AND TERMINATION SYSTEMS MAG-MATE terminals, SIAMEZE terminals, AMPLIVAR terminals and splices, and cluster blocks
PPINCES /// MGNET WIRE TERMINTION MGNET WIRE TERMINS ND TERMINTION SYSTEMS MG-MTE terminals, SIMEZE terminals, MPIVR terminals and splices, and cluster blocks Table of Contents Standard MG-MTE Terminals
RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST's R connectors.
Through Hole Connectors
Through Hole Connectors 43 Whether your Through-Hole Technology applications require a Quick Disconnect Tab, an Insulation Displacement Connector, a Test Point Terminal, a Screw Terminal, a Receptacle,
WILDCAT CONNECTORS
UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS
Product Specifications (for connectors) and (for headers), provides product performance requirements and test result information.
Application Specification Universal MATE-N-LOK* Connectors 08 AUG 18 All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches]. Unless
RA CONNECTOR IDC. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC.54mm R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables pitch Features Twin U-slot ID section The twin U-slot is the most important IDC element in eam JST
www.amphenol-industrial.com UPC Series ABOUT US Amphenol Industrial Operations Amphenol Industrial Operation (AIO), a division of the Amphenol Corporation, is a prominent manufacturer of cylindrical connectors
Creative Links to World Electronics
Interconnect Solutions for Lighting Creative Links to World Electronics Hirose Wire-to-Board Connectors Hirose s interconnect products offer innovation, versatility and low profiles for your LED engineered
Infinite F50 family Reliable. Validated. Compact.
Infinite F50 family Reliable. Validated. Compact. Innovative 8-channel absorbance readers with advanced LED technology 21 CFR Part 11* 98/79/EC IVD-D* Infinite F50 Innovative design with top price-performance
Wire to Board Insulation Displacement Connectors (1/5)
Wire to Board Insulation Displacement Connectors (1/5) XSR 0.6mm pitch - IDC style 0.2A 30V SUR 0.8mm pitch - IDC style, Compact, Low-profile 0.5A (AWG#32) 0.2A (AWG#36) 30V This is the world's smallest
QSFP Copper Module Direct Attach Cable Assembly &Cage
Qualification Test Report 501-60067 12Mar. 2012 Rev. 1 QSFP Copper Module Direct Attach Cable Assembly& Qualification Test Report QSFP Copper Module Direct Attach Cable Assembly & Tyco Electronics. (Shanghai)
Water-Proof Connectors
Water-Proof Connectors Edac s waterproof Wire-to-Wire and Wire-to-Board series was designed for both extreme moisture and nonsubmersion applications supporting both low-level signal and power applications
VSO Thermally Compensated Proportional Valve
4 VSO Thermally Compensated Proportional Valve Typical Applications Gas Chromatography Mass Spectrometry Ventilators O 2 Concentrators/Conservers Anaesthesia Delivery & Monitors Pressure & Control Mass
Type HOLCO Series. Axial Leaded Precision Resistors. Key Features. Characteristics - Electrical. General Data
Key Features Ultra Precision - Down To 0.05% Matched Sets Available To 2ppm/ C High Pulse Withstand Low Reactance Low TCR - Down To 5ppm/ C Up To 1 Watt At 70 C Released To CECC 40101 004, 030 And 804
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board mounting
TO AVOID DOING IRREPARABLE DAMAGE TO DRIVE CIRCUITRY NEVER APPLY AC POWER DIRECTLY TO LED LIGHTBOXES!
INSTALLATION MANUAL TO AVOID DOING IRREPARABLE DAMAGE TO DRIVE CIRCUITRY NEVER APPLY AC POWER DIRECTLY TO LED LIGHTBOXES! 4949 South 110 th Street Greenfield, WI 53228 Phone: (800) 610-6053 Fax: (414)
Miniature Proportional Valve Thermally Compensated Proportional Valve. Physical Properties
VSO Miniature Proportional Valve Thermally Compensated Proportional Valve Typical Applications Gas Chromatography Mass Spectrometry Ventilators O 2 Concentrators/Conservers Anaesthesia Delivery & Monitors
Busbars, Terminals and Accessories
POWERTRAIN SYSTEMS SAFETY & SECURITY SYSTEMS CONVENIENCE DRIVER INFORMATION BODY & CHASSIS SYSTEMS Busbars, Terminals and Accessories INTRODUCTION TE Connectivity proposes specific busbars or terminals,
Data Sheet P992 Low Range Differential Pressure Sensor
Data Sheet P992 Low Range Differential Pressure Sensor Main Features Pressure Ranges Electrical Connection Pressure Connection Housing Material Output Signal 1, 2, 5, 10, ±1, ±2, ±5 Inches of H2O Options
Heavy Duty Miniature Quick-Change Applicator (Side-Feed Type) with Mechanical or Air Feed Systems
Heavy Duty Miniature Quick-Change Applicator (Side-Feed Type) with Mechanical or Air Feed Systems Instruction Sheet 408-8040 30 NOV 17 Rev H Ram Assembly Ram Post Locking Screw Stock Drag Drag Release
STRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
ACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED
DEUTSCH ACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED Reliable and Versatile Range of Connectors for Harsh Environment Aerospace and Military Applications CONTENTS Introduction 03 Technical
3.18-mm [.125-in.] POWERBAND* Contacts
![3.18-mm [.125-in.] POWERBAND* Contacts](/thumbs/94/121763393.jpg "3.18-mm [.125-in.] POWERBAND* Contacts")
3.18-mm [.125-in.] POWERBAND* Contacts Application Specification 06 FEB 12 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
Mini50 Unsealed Connector System 2.00mm Pitch
USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle
AMPSEAL 16* Connector System 24 JUN 13 Rev C
Application Specification 114-13065 AMPSEAL 16* Connector System 24 JUN 13 i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
NTC Thermistors, Flex Foil Sensors
NTC Thermistors, Flex Foil Sensors QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 10K, 47K Tolerance on R 25 -value ± 3 % B 25/85 -value 3960 K Tolerance on B 25/85 -value ± 1 % Operating
Rugged and Sealed (IP68) Plugs and Receptacles For Use with APP Powerpole Signal, Power & Ground Contacts & Housings
Rugged and Sealed (IP68) Plugs and Receptacles For Use with APP Powerpole Signal, Power & Ground Contacts & Housings The SPEC Pak Extreme uses rugged and environmentally sealed (IP68) shells to protect
AXICOM Telecom-, Signal and RF Relays. W11 Relay V Nov. 07 Rev. C ECOC: JM10
108-98010 Nov. 07 Rev. C ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not guarantee that
3 Phase Power Systems - Designed for Canada
3 Phase Power Systems - Designed for Canada AC OUTPUT NESS-25kVA - Mobile NESS-50kVA - Mobile Units Rated AC Power Output 33 66 kw Maximum AC Power Output 33 66 kw AC Output Line Connection 4 - wire (L1-L2-L3-N)
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
Coaxial Snap-Lock Connectors
Coaxial Snap-Lock Connectors Application Specification 114-13010 11 APR 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
Agency Approvals UL and CSA China RoHS - Below MCV Yes Color Red EU RoHS Compliant Yes Maximum Recommended Voltage Rating 600 Volt Units per Box 100
3M Worldwide : United States : Electronics Manufacturing Solutions for Electronic Specialty Markets (ESM) Product Catalog for Electronic Specialty Markets 3M Electronic Specialty Markets - New Product
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
Printer-friendly format 3M Scotchlok Electrical Spring Connectors Y- BOX 5-8#22, 4-6#20, 2-5#18, 2-3#16 AWG, 100 per box, Yellow. Learn More...
3M Worldwide : United States : Electronics Manufacturing Solutions for Electronic Specialty Markets (ESM) Product Catalog for Electronic Specialty Markets 3M Electronic Specialty Markets - New Product
2SS/2S1/2SM SUB-MINIATURE TOGGLES
2SS/2S1/2SM 2S-Series SUB-MINIATURE TOGGLES The 2S family of sub-miniature toggle switches is composed of three switch series; the 2S1-Series toggle switch, the 2SS-Series sealed toggle switch, and the
Surface Mount Terminal Blocks. 971-SLR-SMD mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5 971-SLR-SMD-1.
page 1/5 Surface Mount Terminal Blocks 971-SLR-SMD-1.1 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 971-SLR-SMD-1.1 TECHNICAL INFORMATION Description US Patent # 6.224.399 B1 Canadian Patent # 2,307,922
Miniature Rugged Connector Series
Miniature Rugged Connector Series Miniature Rugged Connector Series Intended for harsh environment applications and used extensively in soldier communications, Amphenol Terrapin is a miniature series of
PMC2003 Harness Assemblies
PMC2003 Harness Assemblies Instruction Sheet 27 JAN 11 TPA/Spacer Base Part Numbers 50-Way PCM2003 Connector Assemblies 1438129 Harness Assembly 1393364 1393365 Tyco Electronics.064 Terminal Assembly 1642303
Surface Mount Terminal Blocks. 950-D-SMD-DS 5.00 mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5 950-D-SMD-DS
page 1/5 Surface Mount Terminal Blocks 950-D-SMD-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-D-SMD-DS TECHNICAL INFORMATION Description 5 mm spacing, surface mount adapted terminal block for
CMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
Application Specification Pin&3Pin Miniature waterproof connector 28July2016 REV: C
Application Specification 114-137093 2Pin&3Pin Miniature waterproof connector 28July2016 REV: C 1. INTRODUCTION This specification covers the requirements for application of 2Pin&3Pin Miniature waterproof
Cheminax RF Coaxial Cables and RF Connectors
Cheminax RF Coaxial Cables and RF Connectors QUICK REFERENCE GUIDE Convenient Lightweight, small diameter Extended temperature range High Performance High flexibility Low capacitance Low attenuation HIGHER
CMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
JAN 18 Rev E
PIDG* PEEK STRATO-THERM* Terminal Crimping Dies Instruction Sheet 408-10039 16 JAN 18 Rev E PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand
Universal MATE-N-LOK* Connectors
Universal MATE-N-LOK* Connectors Application Specification 114-1010 08 AUG 18 Rev T All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
MD CONNECTOR. 1Certified LR Miniature circular connectors. Standards
Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) 0 0 0 Braided wires soldered to the metal shell 0 0 0 0 0 90 MD connector(with ground clip)
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm (.050") pitch ribbon cables
IDC.54mm (.00") pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm (.0") pitch ribbon cables Features Twin U-slot The twin U-slot is the most important IDC element in JST's
Single 2 Piece Contacts: BTB
Dissecting linear LED lighting from a connector standpoint looks very simple from far away, but up close there is no magical solution. Even though there have been new connectors developed in recent years
RY2L Series Miniature Magnetic Latching Relays. E Release Time. 60N (0 6G); Maximum frequency 55Hz
Miniature Magnetic Latching Key features of the RY2L series include: Standard ice cube, 14-pin solder lug termination Operates by pulse input and maintains condition even during power failure Coils rated
Wire. Socket (with polarizing guide) Wire can be connected without stripping cable insulation. IDC contacts. Rise in temperature ( C)
IDC Connectors for Discrete Wires Trouble-free discrete-wire termination with IDC Sockets that accommodate MIL Plugs. XG5 * Two-slot, IDC construction and insulation barrel offer high reliability and large-current
Standard Charging Carts, Intelligent Charging System
LIC30H-A Series LIC36H-A Series Product Data Sheet Standard Charging Carts, Intelligent Charging System Safety-First Design Carts feature rounded edges, no pinch points, no ledges, and locking wheels for
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
Features 2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
Wedge in Plugs Stock No
Amphenol Connectors Description Plugs Stock No. Receptacles Stock No. 2-way 38170 38171 3-way 38172 38173 4-way 38174 38175 6-way 38176 38177 8-way 38178 38179 12-way 38180 38181 Wedge in Plugs Stock No.