Marine Filtration Systems

Transcription

1 Marine Filtration Systems

2 Table of Contents Troubleshooting Guide...3 SNAPP Fuel Filter Water Separator...4 Turbine Series Diesel Spin-on Series Fuel Conditioning Modules Filter Funnels Gasoline Spin-on Series High Capacity Fuel Filtration Fuel Dispensing/Polishing Crankcase Filtration (CCV Systems) Air Filters/Silencers Fuel/Air Separators...26 Hydraulic Filtration Bypass Oil Filtration System Parker Marine Hose...30 Water Detection Probes Accessories Product Information

3 If It's Not A Genuine Racor Filter, you could be asking for trouble... Issue Concerns With Competitor Copies Racor Commitment to Quality Blocked Filter Low quality media will perform poorly and can block 70% sooner than Racor media. Racor uses propriety Aquabloc media that meets or exceeds water removal and particle efficiency requirements for OEM fuel injection systems. Bypassing Poorly constructed filters may bypass internally allowing dirty fuel and water to reach the engine. Racor uses high quality materials and production processes to ISO/TS16949 to eliminate bypass problems. Split Or Leaking Seals Poor quality seals will swell excessively, leak, and may deteriorate within the service period. Racor uses high quality automotive grade gaskets and seals that are compatible with B20 bio-diesel (i.e. NBR, HNBR, and Viton ). Dirty Fuel Reaching Engine Inefficient filters will not protect the engine. Racor replacement filters will perform as designed for the application. Water In Fuel Reaching Engine Very few, if any, copycat filters perform to original equipment specifications. Racor uses the same media and materials in original equipment and replacement filters. Cold Conditions Poor quality pump diaphragms and seals will harden and cause leaking. Racor uses high quality materials that are rated for operating temperatures of -40 to +255 F (-40 to +124 C). Cracked Head Casting Poor quality head castings cannot cope with extreme environmental conditions and vibrations. Racor products are validated under extreme vibration and climatic conditions. Contains Banned Substances Cracked Clear Bowl Some copy filters contain banned substances in the canister coating and plating. Copycat filter bowls are often made from poor quality material that will crack under extreme temperature, chemical exposure, or continuous vibrations. Racor canisters contain no banned substances and are validated under extreme salt spray and climatic conditions. Racor uses a unique durable clear plastic bowl material with high clarity, excellent UV protection, low and high temperature resistance, is impact resistant, and is impervious to all fuel types. Filter Accessories Unauthorized Racor copies do not always offer accessories. If they do, they are likely not tested. Racor has a wide range of filter accessories that are validated for integrity, EMC compatibility, and safety. 3

4 SNAPP. The fuel filter change that changes everything. SNAPP is big protection for small engines with fuel flows up to 26 gph and makes every filter change literally a snap. Fast, easy, clean. No tools are needed when it s time for service, simply snap in a new filter. Simple installation and a patented priming system mean that protecting your engine investment is now a SNAPP. GENUINE RACOR Quick-release squeeze tabs make filter changes a snap. Permanent mounting bracket is stainless steel for withstanding corrosive environments. SNAPP is a one-piece fuel filter water separator for 24/7 protection. Fast, easy, clean, SNAPP is a fuel filter change for the better. Heavy-duty high-impact nylon construction won t ever rust or corrode, even in humid conditions. 4 The world turns to Racor for filtration solutions that provide ultimate protection from water and solid contamination. This is filtration that includes two innovations often copied but never quite duplicated the powerful protection of patented, world-class Aquabloc filter media and, the Racor trademark, a clear bowl that allows for at-a-glance inspection of fuel system integrity. Clear bowl for at-a-glance inspection. The rugged clear bowl allows on-the-spot inspection for water in fuel a significant advantage when troubleshooting fuel quality. The Racor self-venting drain means easy service with no mess twist, drain, done. Part # Description Fuel Filter with Bracket - 2 Micron Fuel Filter with Bracket - 10 Micron Fuel Filter with Bracket - 30 Micron R Fuel Filter - Service - 2 Micron R Fuel Filter - Service - 10 Micron R Fuel Filter - Service - 30 Micron Fuel Filter with Bracket - with Drain - 2 Micron Fuel Filter with Bracket - with Drain - 10 Micron Fuel Filter with Bracket - with Drain - 30 Micron R Fuel Filter - Service - with Drain - 2 Micron R Fuel Filter - Service - with Drain - 10 Micron R Fuel Filter - Service - with Drain - 30 Micron Specifications Maximum Flow Rate 26 gph (100 lph) Aquabloc Micron Rating 2, 10, or 30 micron Height 7.8" (198 mm) Width 3.8" (97 mm) at bracket Depth 4.1" (104 mm) Water Sump Capacity 3.4 oz. (100 ml) Bracket Material Stainless Steel Port Size 3/8" (9.5 mm) Quick-Connect Fittings 3/8" (9.5 mm) (per SAE J2044) Rated Pressure 50 PSI (3.5 bar) Water Removal Efficiency 99% Rated Temperature Range Legendary Aquabloc filter media in 2, 10 or 30 micron rating. The Aquabloc media is the world s definitive filtration protection it's 99% effective in separating water and solid contamination from marine and diesel fuels. -20 to 150 F (-29 to 66 C)

5 Fuel Filtration Duplex units offer mariners the peace-of-mind of having a clean filter in reserve. Rough seas can stir up tank sediment which will quickly clog a single fuel filter. With Racor, a simple turn of a valve puts a clean filter back on-line. Servicing of the clogged filter can then be preformed even with the engine running. Legendary Diesel Fuel Filtration When engines demand heavy-duty, high-capacity water separation and fuel filtration, the Turbine Series is the most complete, efficient, and reliable engine protection you can install. Symbolizing Racor s continuing commitment to the science of filtration, the Turbine Series has established its position as the filter/ separator often imitated, but never equaled. Models that include an aluminum bowl or stainless steel shield meet ASTM FS1201 certification, are UL-listed, American Bureau of Shipping, Veritas, Det Norske Veritas, ISO 10088, and USCG accepted. For severe service, all-metal bowls should be specified. Paired with our famous and genuine Aquabloc filters, the Racor Turbine Series is still the preferred brand for serious sailors globally. 5

6 Make certain that you replace your Turbine Series assemblies only with Genuine Racor Aquabloc filters. While many others try to imitate the construction and performance of Aquabloc filters, only the genuine article delivers the fit and performance specified by engine manufacturers, and guarantees that your Racor filter/water separator will deliver the protection you count on. For convenience, end-caps are color-coded for easy identification and application. Red = 30 micron, primary filtration. Blue = 10 micron, secondary filtration. Brown = 2 micron, final filtration. The top cap includes handles for easy servicing and a filter bypass button for emergencies. Aquabloc media is a blend of high-grade cellulose compounded with engineered fibers, and a special chemical treatment. Water will not cling to the filter, Aquabloc repels it. Aquabloc Filters Besides removing asphaltenes, water, gums, and varnishes, Aquabloc filters out tiny particles of dirt and algae from diesel fuel. Aquabloc filters have polymer end-caps that will not corrode, ever. With an Aquabloc replacement filter, you get a complete kit with all the seals you need. And not just any seals, but speciallyformulated, Racor-engineered seals. Always carry extra Racor fuel filters as one tankful of dirty fuel can quickly clog a filter. Many Racor filters include an emergency bypass. 6

7 The Inside Story 1 As fuel enters, it moves past the internal check valve, then through the turbine centrifuge where it flows in a spiraling direction, spinning off large particulates and water droplets. Being heavier than fuel, the large particulates and water droplets fall to the bottom of the bowl. 2 Smaller water droplets bead-up along and on the sides of the internal components and on the surface of the Aquabloc filter. When large enough, they too fall into the highcapacity bowl to be drained as needed. 3 Besides repelling water asphaltenes, algae, rust, and tiny solids from fuel. Aquabloc filters are waterproof, so they remain effective longer, saving you money. Order only genuine Aquabloc replacement filters TM -OR Select Filter 2010 (500 Series), Select a Micron Rating SM = 2, TM = 10, or PM = 30 Must have "-OR" in part number (includes o-rings) 2020N - 02 Select Filter, 2040N (900 Series), or 2020N (1000 Series) Select a Micron Rating 02, 10, or MA with fuel flow shown 7

8 Electric Primer Pump Kit Racor's electric primer pump kit can be retrofitted to many of the Racor 900 or 1000 Turbine Series fuel filters/water separators already in service. The filter pump is an innovative and proprietary system consisting of a 100 micron pre-screen filter, a flow bypass circuit, and an innovative roller cell pump powered by a 12 or 24 vdc Racor brushless motor. The complete primer pump kit includes a wiring harness and controller switch. Order Part Number: RKP1912 for 12 vdc systems RKP1924 for 24 vdc systems When the switch is activated the fuel is drawn into the pre-screen, then pumped through the housing, refilling the unit with fresh, clean, dry fuel. 100 micron pre-screen. Flow 60 GPH (227 LPH) in priming mode 3.3 in. (8.4 cm) When not in use, the filter pump system is bypassed and the Racor fuel filter/water separator functions normally. The unitized assembly is only 3.3 in. (8.4 cm) tall and kit is easily retrofitted to a 900 or 1000 series filter. For Racor duplex or triplex filter systems, only one primer pump is needed. Note: Do not use in continuous duty applications. 8

9 Marine Turbine Series Fuel Filters Model 500MA 900MA 1000MA 75500MAX 75900MAX Max. Flow Rate (One filter on-line) (Two filters on-line) 60 GPH (227 LPH) N/A 90 GPH (341 LPH) N/A 180 GPH (681 LPH) N/A 60 GPH (227 LPH) 120 GPH (454 LPH) 90 GPH (341 LPH) 180 GPH (681 LPH) Height 11.5 in. (29.2 cm) 17.0 in. (43.2 cm) 22.0 in. (55.9 cm) 11.5 in. (29.2 cm) 17.0 in. (43.2 cm) Width 5.8 in. (14.7 cm) 6.0 in.(15.2 cm) 6.0 in. (15.2 cm) 14.5 in (36.8 cm) 18.8 in. (47.8 cm) Depth 4.8 in. (12.2 cm) 7.0 in. (17.8 cm) 7.0 in. (17.8 cm) 9.5 in. (24.1 cm) 11.0 in. (27.9 cm) Weight (approx.) 4 lbs (1.8 kg) 6 lbs (2.7 kg) 17 lbs (7.7 kg) 17 lbs (7.7 kg) 23 lbs (10.4 kg) Port Size (metric optional) 1 3/4-16 SAE 16 mm x 1.5 7/8-14 SAE 22 mm x 1.5 7/8-14 SAE 22 mm x 1.5 3/4-16 SAE N/A 7/8-14 SAE N/A Clean Pres. Drop 0.3 PSI (0.02 bar) 0.34 PSI (0.02 bar) 0.49 PSI (0.03 bar) 0.70 PSI (0.05 bar) 1.7 PSI (0.12 bar) Max. Operating Pressure 2 15 PSI (1.03 bar) 15 PSI (1.03 bar) 15 PSI (1.03 bar) 15 PSI (1.03 bar) 15 PSI (1.03 bar) Replacement Filter 2010 Series 2040 Series 2020 Series 2010 Series 2040 Series Overhead Clearance 4.0 in. (10.2 cm) 5.0 in. (12.7 cm) 10.0 in. (25.4 cm) 4.0 in. (10.2 cm) 5.0 in. (12.7 cm) Ambient Temperature Range -40 to +255 F (-40 to +124 C) Maximum Fuel Temperature 190 F (88 C) Notes: Units are available with metal bowls, add M after MA, i.e. 1000MAM. 1 Use (*) for metric port threads, i.e. *500MA, *900MA, and *1000MA. 2 Vacuum installations are recommended. Model MA MAX MA MAV Max. Flow Rate (One filter on-line) (Two filters on-line) (Three filters on-line) N/A 360 GPH (1363 LPH) N/A 180 GPH (681 LPH) 360 GPH (1363 LPH) N/A N/A N/A 540 GPH (2044 LPH) 180 GPH (681 LPH) 360 GPH (1363 LPH) 540 GPH (2044 LPH) Height 22.0 in. (55.9 cm) 22.0 in. (55.9 cm) 22.0 in. (55.9 cm) 22.0 in. (55.9 cm) Width 16.5 in. (41.9 cm) 18.0 in. (45.7 cm) 18.0 in. (45.7 cm) 21.5 in. (54.6 cm) Depth 12.0 in. (30.5 cm) 11.0 in. (27.9 cm) 11.0 in. (27.9 cm) 11.8 in. (30.0 cm) Weight (approx.) 26 lbs (11.8 kg) 30.lbs (13.6 kg) 39 lbs (17.7 kg) 52 lbs (23.6 kg) Port Size 3/4-14 NPT 7/8-14 SAE NPT 3/4-14 NPT Clean Pres. Drop 1.7 PSI (0.12 bar) 3.7 PSI (0.26 bar) 1.7 PSI (0.12 bar) 2.5 PSI (0.17 bar) Max. Operating Pressure 3 15 PSI (1.03 bar) 15 PSI (1.03 bar) 15 PSI (1.03 bar) 15 PSI (1.03 bar) Replacement Filter 2020 Series 2020 Series 2020 Series 2020 Series Overhead Clearance 10.0 in. (25.4 cm) 10.0 in. (25.4 cm) 10.0 in. (25.4 cm) 10.0 in. (25.4 cm) Ambient Temperature Range -40 to +255 F (-40 to +124 C) Maximum Fuel Temperature 190 F (88 C) Notes: Units are available with metal bowls, add M after MA, i.e. 1000MAM. 3 Vacuum installations are recommended. 9

10 Compact and Versatile Systems for Main Propulsion and Genset Applications Diesel Spin-on Series Powerful primer pumps integrated into mounting heads. Die cast aluminum heads with multiple ports make installation as easy as adding options. Cost-Effective Cost-effective designs for on-engine or remote mounting. Complete assemblies available in all-metal bowls. High-Capacity Hand-operated fuel priming pumps are integral to many Racor diesel spin-on series models, a feature that allows for removal of unwanted air from the filter and engine fuel system. Environmentally Friendly Metal bowls are reusable, impact-resistant, and virtually indestructible. When it s time for service, only the filter is replaced the bowl and drain plug are reused. The long lifecycle of Racor bowls saves you money and reduces the environmental impact through disposal of less material. Note: Use metal bowl versions for all marine engine room applications. Easy Upgrades Water-in-fuel (WIF) sensors are available to alert operators to drain accumulated water from the bowl. Corrosion-Resistant Construction Advanced technology means bowls will not deteriorate from water collection, alcoholblended fuels, exposure to harsh additives, salt spray, or UV light. Safety First Racor s UL-listed filters meet ABYC, ASTM, ISO, and many other global standards for filters used in marine engine rooms. Brass plug with tapered thread meets ABYC standards. The best gaskets and o-rings available for consistent, sure seals. Aquabloc media is corrugated, allowing greater surface area exposure for fuel filtration/water separation, and an increased dirt-holding capacity. Bowls are virtually indestructible. They won t discolor from exposure to alcohol, additives, or UV light. A die cast aluminum bowl with epoxy powder paint and drain plug meet CFR33 regulation and other marine standards. Water sensor options are available for most models (RK30880E shown, UL-Listed). See pages for a list of water detection systems. 10

11 Diesel Spin-on Filters Racor Aquabloc Spin-on Fuel Filters Are Available in Color Coded 2,10, or 30 Micron Ratings. P = 30 micron, primary filtration. T = 10 micron, secondary filtration. S = 2 micron, final filtration. Aquabloc Spin-on Fuel Filters Besides removing asphaltenes, water, gums, and varnishes, Aquabloc filters out tiny particles of dirt and algae from diesel fuel. With an Aquabloc replacement filter, you get a complete kit with all the seals you need. And not just any seals, but speciallyformulated, Racor-engineered seals. Always carry extra Racor fuel filters as one tankful of dirty fuel can quickly clog a filter. Please specify carefully there are important differences among Spin-On Series features which effect performance and application. Specifications 215RMAM 230RMAM 245RMAM 445MAM10 460MAM10 490MAM MAM10 Maximum Flow Rate 15 GPH (57 LPH) 30 GPH (114 LPH) 45 GPH (170 LPH) 45 GPH (170 LPH) 60 GPH (227 LPH) 90 GPH (341 LPH) 120 GPH (454 LPH) Maximum PSI 1 30 PSI (2.1 bar) 30 PSI (2.1 bar) 30 PSI (2.1 bar) 15 PSI (1.0 bar) 15 PSI (1.0 bar) 15 PSI (1.0 bar) 15 PSI (1.0 bar) Clean Pressure Drop 0.12 PSI (0.01 bar) 0.3 PSI (0.02 bar) 0.6 PSI (0.04 bar) 0.2 PSI (0.01 bar) 0.3 PSI (0.02 bar) 0.4 PSI (0.03 bar) 0.5 PSI (0.03 bar) Port Size 1/4-18 NPTF 1/4-18 NPTF 1/4-18 NPTF 3/8 NPTF 3/8 NPTF 3/8 NPTF 3/4 SAE Primer Pump Yes Yes Yes Yes Yes Yes Yes Replacement Filter R15TUL R20TUL R25TUL S3204TUL S3211TUL S3201TUL S3201TUL Number of Ports Water Sensor Option RK30880E Height 7.7 in. (19.6 cm) 9.0 in. (22.9 cm) 10.5 in. (26.7 cm) 9.4 in. (23.9 cm) 10.8 in. (27.4 cm) 12.8 in. (32.5 cm) 12.8 in. (32.5 cm) Width 3.9 in. (9.9 cm) 3.9 in. (9.9 cm) 4.0 in. (10.2 cm) 4.5 in. (11.4 cm) 4.5 in. (11.4 cm) 4.5 in. (11.4 cm) 4.5 in. (11.4 cm) Depth 4.0 in. (10.2 cm) 4.0 in. (10.2 cm) 4.0 in. (10.2 cm) 4.8 in. (12.2 cm) 4.8 in. (12.2 cm) 4.8 in. (12.2 cm) 4.8 in. (12.2 cm) Weight (approx.) 1.2 lbs (0.5 kg) 2.0 lbs (0.9 kg) 2.2 lbs (1.0 kg) 2.9 lbs (1.3 kg) 3.1 lbs (1.4 kg) 3.3 lbs (1.5 kg) 3.3 lbs (1.5 kg) Ambient Temp Range -40 to +255 F (-40 to +124 C) Maximum Fuel Temp 190 F (88 C) 1 Pressure Installations are applicable up to the maximum PSI shown, vacuum installations are recommended. 11

12 Fuel Conditioning Modules Durable, 12 vdc roller-cell electric fuel pump offers the benefit of an electric, ondemand, priming pump. A fuel filter/water separator and primer pump in one unit. The patented P Series Diesel Fuel Conditioning Module (for vacuum side applications only) was developed for application in any diesel engine fuel injection system. P Series assemblies are available in three sizes and all feature 3/8" NPT fuel ports. This innovative and modular fuel filter/water separator incorporates low-pressure fuel system components into a single package. It supplies clean, dry fuel to the fuel system and serves as a repriming system. Important Note: ABYC standards allow for installation outside of the engine room only. High-performance Aquabloc cartridge-style filter media is environmentally friendly and incinerable. Specifications P4 P5 Maximum Flow Rate 40 GPH (151 LPH) 50 GPH (189 LPH) Clean Pressure Drop 0.5 PSI (0.03 bar) 0.8 PSI (0.06 bar) Max. Pump Output (at 14.4 volts) 40 GPH (151 LPH) 40 GPH (151 LPH) Standard Fuel Port Size (SAE J476) 3/8-18 NPT 3/8-18 NPT Total Number of Ports Available Fuel Inlets Fuel Outlets Replacement Filter 2 micron 10 micron 30 micron R R R R R R Minimum Service Clearance 2.5 in. (6.4 cm) 2.5 in. (6.4 cm) Height 9.0 in. (22.9 cm) 11.5 in. (29.2 cm) Depth 5.2 in. (13.2 cm) 5.2 in. (13.2 cm) Width 4.8 in. (12.2 cm) 4.8 in. (12.2 cm) Weight (dry - approx.) 3.8 lbs (1.7 kg) 4.2 lbs (1.9 kg) Maximum Pump Outlet Pressure 10 PSI (0.7 bar) 10 PSI (0.7 bar) Features Water Sensor Heater 1 Pressure Regulator (10 PSI) Ambient Temp Range Maximum Fuel Temperature Standard Standard Standard -40 to +255 F (-40 to +124 C) 190 F (88 C) Standard Standard Standard Vacuum installations are recommended. 1 Not for use with gasoline applications. How To Order (The example below illustrates how part numbers are constructed). P N H Specify Model P4 (for 40 GPH) P5 (for 50 GPH) Must be in part number. Specifies a 12 vdc pump. Specify micron rating: 02, 10, or 30 Must be in part number. Specifies 3/8 NPT ports. Must be in part number. Specifies a 12 vdc 150 watt heater. 12

13 Fuel Conditioning Modules Product Specifications Max. Flow Rate 60 GPH (220 LPH) Filter Funnels Racor Filter Funnel (RFF) is a heavyduty, fast-flow, filter-in-a-funnel that separates damaging free water and contaminants from gasoline, diesel, heating oil, and kerosene. The RFF family of products is capable of removing free water and solids down to 50 micron and allows you to visually inspect the integrity of your fuel supply as you refuel. The RFF family is manufactured using industrial grade black electro conductive polypropylene. Carbon powder is injected into the plastic so that the RFF will conduct static electricity. The grounding capability of the RFF is an important safety feature. Always use proper fuel handling procedures and follow local, state, and federal regulations. No. of Ports 2 Port Size Water Sensor P510MAM R R R RK RK RK RK M ORB Standard Micron Rating 10 Operating Voltage 12V and 24V Available Part Numbers FF/WS, 10 micron 2 micron Replacement Element 10 micron Replacement Element 30 micron Replacement Element 12V Water Detection 24V Water Detection 12V Water Detection w/ Buzzer 24V Water Detection w/ Buzzer The New Racor Fuel Polisher removes contamination at the source - the fuel tank. Most filtration solutions block contamination as it moves through the fuel system on the way to the engine. As contamination builds, fuel filters will choke leading to inadequate fuel delivery to the engine, damage to injectors and other engine components, increased emissions, and decreased performance. The Racor fuel polisher removes contamination from the fuel tank allowing the fuel system to run at peak performance. By setting up a new fuel circuit around the fuel tank contaminates such as water, dirt and rust will be removed from the fuel delivery circuit, resulting in increased filter life, better performance, and less downtime to change filters. Specifications RFF1C RFF3C RFF8C RFF15C Max. Flow Rate 2.5 GPM (9.4 LPM) 3.5 GPM (13.2 LPM) 5 GPM (18.9 LPM) 12 GPM (45.4 LPM) Micron Rating 50 micron 50 micron 50 micron 50 micron Height 6.0 in. (15.2 cm) 9.0 in. (22.9 cm) 10.0 in. (25.4 cm) 10.0 in. (25.4 cm) Diameter 3.5 in. (8.9 cm) 5.5 in. (14.0 cm) 8.5 in. (21.6 cm) 8.5 in. (21.6 cm) Weight 0.2 lb (0.09 kg) 0.3 lb (0.14 kg) 0.6 lb (0.27 kg) 1.0 lb (0.45 kg) Caution for Users: Petroleum products flowing over a plastic surface generate static electricity. Caution should be taken to ensure that the RFF is grounded to reduce static electricity buildup and reduce the chance of explosions or fire. Electrically bond the funnel by using a wire with a metal clip on each end and clamp one to the upper rim of the funnel and the other to the fueling source. For example, the metal gas can or nozzle from the pump. 13

14 Every Time You Squeeze The Trigger, You Threaten Your Engine s Life. No matter how carefully gasoline is handled or stored, dirt, rust, gums, algae, and water are going to find their way in, and just a few drops can leave you dead in the water. Racor gasoline fuel filter/water separators with Aquabloc media remove virtually 100% of damaging water and solids, allowing engines to run with more power and greater efficiency. Install a Racor mounting head or spin directly onto your existing filter head to protect your engine and improve its performance. Spin on a Racor fuel filter/water separator, for the life of your engine. The Most Complete Protection on the Water Being on the water is fun, having water in your fuel is not. And more than ever today s high-performance gasoline inboard and outboard engines require clean, dry fuel. Racor filters offer the improved features and peace-of-mind that come with our quality fuel filter/ water separators. Clear contaminant collection bowl with drain valve for outboards only 10 micron Aquabloc media is standard High capacity and long life Rated 98% efficient at 10 micron per SAE test procedures Corrosion-resistant construction. Metal bowl units for inboard powered boats meet 33 CFR and USCG regulations Meets ABYC standard for gasoline-powered vessels New 2 micron option Integral primer pump versus the old primer bulb for outboards Racor innovation leads the market again. The new 490R-RAC-01 gasoline fuel filter/ water separator with integral primer pump (for outboards only) eliminates the need to install a primer bulb in the fuel line. Specifications 120R-RAC R-RAC R-RAC R-RAC R-RAC R-RAC R-RAC R-RAC-32 Max. Flow Rate 30 GPH (114 LPH) 30 GPH (114 LPH) 60 GPH (227 LPH) 60 GPH (227 LPH) 90 GPH (341 LPH) 90 GPH (341 LPH) 90 GPH (341 LPH) 120 GPH (454 LPH) Filter (10 micron) (2 micron) S3240 N/A S3240TUL N/A S3227 S3228SUL S3228TUL S3228SUL S3227 S3228SUL S3232 N/A S3232TUL N/A S3232TUL N/A Center Threads M18 x 1.5 M18 x Port Size 1/4-18 NPTF 1/4-18 NPTF 1/4-18 NPTF 1/4-18 NPTF 3/8-18 NPTF 3/8-18 NPTF 3/8-18 NPTF 1/2-14 NPTF Height 6.5 in. (16.5 cm) 6.0 in. (15.2 cm) 9.4 in. (23.9 cm) 9.0 in. (22.9 cm) 9.9 in. (25.1 cm) 11.0 in. (27.9 cm) 10.5 in. (26.7 cm) 10.4 in. (26.4 cm) Width 3.2 in. (8.1 cm) 3.2 in. (8.1 cm) 4.0 in. (10.2 cm) 4.0 in. (10.2 cm) 4.5 in. (11.4 cm) 4.2 in. (10.7 cm) 4.2 in. (10.7 cm) 4.0 in. (10.2 cm) Depth 3.2 in. (8.1 cm) 3.2 in. (8.1 cm) 4.0 in. (10.2 cm) 4.0 in. (10.2 cm) 4.8 in. (12.2 cm) 4.5 in. (11.4 cm) 4.5 in. (11.4 cm) 5.0 in. (12.7 cm) Weight (approx.) 1.1 lbs (0.5 kg) 1.2 lbs (0.5 kg) 2.0 lbs (0.9 kg) 2.0 lbs (0.9 kg) 2.6 lbs (1.2 kg) 3.0 lbs (1.4 kg) 3.0 lbs (1.4 kg) 2.0 lbs (0.9 kg) Clean Pressure Drop 0.2 PSI (0.01 bar) 0.2 PSI (0.01 bar) 0.6 PSI (0.04 bar) 0.6 PSI (0.04 bar) 1.0 PSI (0.07 bar) 0.6 PSI (0.04 bar) 0.6 PSI (0.04 bar) 0.2 PSI (0.01 bar) Max. Working Pressure PSI (0.5 bar) 7.0 PSI (0.5 bar) 7.0 PSI (0.5 bar) 7.0 PSI (0.5 bar) 7.0 PSI (0.5 bar) 7.0 PSI (0.5 bar) 7.0 PSI (0.5 bar) 7.0 PSI (0.5 bar) Service Clearance (under bowl) 1.0 in. (2.5 cm) 1.0 in. (2.5 cm) 1.0 in. (2.5 cm) 1.0 in. (2.5 cm) 1.0 in. (2.5 cm) 1.0 in. (2.5 cm) 1.0 in. (2.5 cm) 1.0 in. (2.5 cm) Ambient Temp Range -40 to +255 F (-40 to +124 C) Max. Fuel Temperature 190 F (88 C) 1 Pressure installations are acceptable up to the maximum PSI shown. Racor filter/separators will not separate oil from gasoline in blended fuel mixtures. 14

15 Upgrade Your Gasoline Filter Convenient Spin-ons Now, owners of inboard or outboard engines can get smoother operation and longer life all in one easy spin, onto their existing engine filter heads. There s a choice of rugged, PFF5510 Replaces Mercury, Mercruiser, Yamaha, Suzuki, Honda, and Tohatsu. 10 micron. Inboard or Outboard B32020MAM Replaces quicksilver. Also fits: SMI, Sierra, Aquapower, and other filter heads (comes with a metal bowl shown above). 10 micron. Inboard or Outboard S3220TUL 1 Replacement filter for B32020MAM. 10 micron. Inboard or Outboard B32021MAM Replaces OMC. UL Recognized (comes with a metal bowl). 10 micron. Inboard or Outboard S3221TUL Replacement filter for B32021MAM. 10 micron. Inboard or Outboard B32013 Replaces Quicksilver, Yamaha, Suzuki, SMI, Volvo Penta, Sierra, AquaPower, and other filter heads (comes with a clear bowl shown above). 10 micron. reusable clear bowls with self-venting drains (for outboard applications), or a metal bowl with drain plug (for inboard applications). Metal bowls are UL Listed and USCG accepted. Outboard S3213 Replacement filter for B micron. Outboard B32014 Replaces OMC (comes with a clear bowl). 10 micron. Outboard New Packaging Parker Racor is proud to introduce the new packaging for Marine gasoline filters. The new packaging was designed to improve product protection and increase customer appeal, by making Racor marine products stand out on retail shelves nationwide. The new retail packaging, uses maximum strength paperboard for increased product protection. Easy to read graphics were incorporated into the new design. Each graphic panel shows relevant information such as product features, applications, marine certifications, marine standards, consumer benefits and product performance. Useful features such as, service part numbers and product cutaway illustrations are also included. To allow for speed checkouts, UPC barcodes are included on all new Racor Marine packaging. The new packaging exemplifies the quality that is built into every Racor product, from final assemblies to replacement filters. S3214 Replacement filter for B micron. Outboard 1 Optional 2 micron filter (S3220SUL). Compact Gasoline Filters for Smaller Boats and Personal Watercraft Specifications 025-RAC RAC A Max. Flow Rate 25 GPH (95 LPH) 25 GPH (95 LPH) 35 GPH (132 LPH) Media 250 micron (cleanable plastic screen) 10 micron (Aquabloc filter) 10 micron (Aquabloc filter) Port Size 1/4-18 NPTF 1/4-18 NPTF 1/4-18 NPTF Dimensions H 4.3 x D 2.1 H 4.3 x D 2.1 H 6 x D 3.3 x W

16 800 Series Fuel Filtration Specs 804MA 75804MA 79804MA Flow Rate 240 GPH (908 LPH) 480 GPH (1817 LPH) 720 GPH (2725 LPH) In/Out Ports 3/4 NPT 3/4" NPT 3/4" NPT Height 20.6 in. (52.3 cm) 20.6 in. (52.3 cm) 20.6 in. (52.3 cm) Width 6.7 in. (17.0 cm) 19.0 in. (48.3 cm) 27.0 in. (68.6 cm) Depth 8.9 in. (22.6 cm) 17.8 in. (45.2 cm) 17.8 in. (45.2 cm) Delta P Max Working Pressure Water Capacity 0.48 PSI (0.03 bar) 15 PSI (1.03 bar) 40.6 oz (1.2 L) Weight 25 lbs (11.3 kg) 60 lbs (27.2 kg) 90 lbs (40.8 kg) Racor's compact 804MA Series diesel fuel filter/water separator, made of 100% steel construction to meet ABS and USCG requirements for marine fuel filters on classed and inspected vessels. The 804MA series are available in single, dual valved and triple valved configurations and handle fuel flow rates of 240, 480 and 720 gallons per hour, respectively; utilizing the standard Racor 2020 Series filter cartridges. 100% Steel Construction By ASME Certified Welders Stainless Steel T-handle On Steel Lid Steel/High Pressure Glass Water Sight-Gauge Steel Contaminant Sump With Steel Drain Plug Marine-Grade White Exterior Coating Durable Steel Mounting Brackets 800 Series fuel filter/water separators offer large diesel engine operators ease of maintenance and continuous engine operation. Specifications 75806MA 79806MA 812MA 75812MA 79812MA Maximum Flow Rate 720 GPH (2725 LPH) 1080 GPH (4088 LPH) 720 GPH (2725 LPH) 1440 GPH (5451 LPH) 2160 GPH (8176 LPH) Fuel Ports 1" NPT 1" NPT 1" NPT 1" NPT 1 1/4" NPT Max Working Pressure 30 PSI (2.1 bar) 30 PSI (2.1 bar) 30 PSI (2.1 bar) 30 PSI (2.1 bar) 30 PSI (2.1 bar) Clean Pressure Drop 3.2 PSI (0.2 bar) 6.0 PSI (0.4 bar) 3.2 PSI (0.2 bar) 6.0 PSI (0.4 bar) 5.2 PSI (0.35 bar) Replacement Filter (2) RK 22788* (3) RK 22788* RK 22610** (2) RK 22610** (3) RK 22610** Height 22.8 in. (57.9 cm) 22.8 in. (57.9 cm) 33.2 in. (84.3 cm) 33.2 in. (84.3 cm) 33.2 in. (84.3 cm) Width 21.8 in. (55.4 cm) 33.3 in. (84.6 cm) 6.6 in. (16.8 cm) 21.8 in. (55.4 cm) 33.3 in. (84.6 cm) Depth 16.0 in. (40.6 cm) 16.0 in. (40.6 cm) 8.9 in. (22.6 cm) 16.0 in. (40.6 cm) 16.0 in. (40.6 cm) Weight (approx.) 52 lbs (23.6 kg) 79 lbs (35.8 kg) 36 lbs (16.3 kg) 89 lbs (40.4 kg) 133 lbs (60.3 kg) Sump Capacity 2 gal (7.6 l) 2.9 gal (11.0 l) 1 gal (3.8 l) 2 gal (7.6 l) 2.9 gal (11.0 l) Service Clearance (above) (below) Ambient Temp Range Max Fuel Temperature * RK Replacement filter kit (contains one each of 4021 and 4022 filter and a lid gasket; 75806MA requires 2 kits; 79806MA requires 3 kits). ** RK Replacement filter kit (contains one each of 8021 and 8022 filter and a lid gasket; 75812MA requires 2 kits; 79812MA requires 3 kits) in. (30.5 cm) 4.0 in (10.2 cm) 12.0 in. (30.5 cm) 4.0 in (10.2 cm) 12.0 in. (30.5 cm) 4.0 in (10.2 cm) -40 to +255 F (-40 to +124 C) 190 F (88 C) 12.0 in. (30.5 cm) 4.0 in (10.2 cm) 12.0 in. (30.5 cm) 4.0 in (10.2 cm)

17 RVFS Series Hydrocarbon Filtration Versatile RVFS Series Applications for Racor RVFS Series filter vessels include removing liquid and solid contaminants from diesel fuel, gasoline, kerosene, aviation gas, jet fuel, and other lubricating or hydraulic oils. RVFS vessels utilize proven filter design technology and can be used as a coalescer, separator, water absorber, or clay treater by changing internal components, flow direction, or by selecting optional filter cartridges when ordering. The vessels are fabricated from carbon steel with an exterior primer coating of galvanized suede gray and the interior is epoxy coated to meet MIL-C-4556E. Filter choices include a coalescer, separator, prefilter, and water absorber or clay treater. Completely dressed factory filter vessels can be specified with differential pressure gauges, water sight glasses, air eliminators, and manual or automatic drains. Wall mount units can be special ordered. Consult factory for other options and see brochure #7648. Pressure Rating: 250 PSI (17.2 bar) ASME Code Section VIII Specifications RVFS-1 RVFS-2 RVFS-3 Inlet and Outlet Ports 2.0 in. NPT 2.0 in. NPT 2.0 in. NPT Maximum Flow Rate (diesel) 25 GPM (94 LPM) 50 GPM (189 LPM) 75 GPM (283 LPM) Vent and Relief Ports 3/4 in. NPT 3/4 in. NPT 3/4 in. NPT Water Level Gauge Ports 1/2 in. NPT 1/2 in. NPT 1/2 in. NPT Differential Gauge Ports 1/8 in. NPT 1/8 in. NPT 1/8 in. NPT Pressure and Temperature o F ( o C) ASME Code Stamped Yes Yes Yes Clean Pressure Drop 2 PSID (0.14 bar) 2 PSID (0.14 bar) 2 PSID (0.14 bar) Pressure Drop/Filter Change out 15 PSID (1.0 bar) 15 PSID (1.0 bar) 15 PSID (1.0 bar) Height 35.3 in. (89.7 cm) 49.8 in. (126.5 cm) 63.8 in. (162.1 cm) Width 13.5 in. (34.3 cm) 13.5 in. (34.3 cm) 13.5 in. (34.3 cm) Depth 13.2 in. (33.5 cm) 13.2 in. (33.5 cm) 13.2 in. (33.5 cm) Dry Weight 100 lbs. (45 kgs) 115 lbs. (52 kgs) 130 lbs. (59 kgs) Overhead Service Clearance 16.0 in. (40.6 cm) 32.0 in. (81.3 cm) 47.0 in. (119.4 cm) Note: For RVFS-1, 2, and 3, customer must order one HOCP and one HSP filter. A fuel filter/water separator consists of one coalescer and one separator filter. The Ultimate In High- Capacity Filtration For over 40 years, Racor has been recognized as the leader in filtration and separation technology. Our engineering team takes specific application prerequisites, and by utilizing the latest computer-assisted design tools, quickly develops the necessary components to manufacture filter vessels that meet industry and customerspecific requirements. Our successful experience in global applications is the result of a continuous improvement process and real-world evaluations of product performance. Replacement Filter Options RVFS-1** Micron Description HOCP Coalescer HSP Separator HOCP Coalescer HSP Separator HOCP Coalescer HSP Separator HOCP Coalescer HSP Separator RVFS-2** Micron Description HSP Separator HOCP Coalescer HSP Separator HOCP Coalescer HSP Separator HOCP Coalescer HSP Separator RVFS-3** Micron Description HSP Separator HOCP Coalescer HSP Separator HOCP Coalescer HSP Separator HOCP Coalescer HSP Separator 17

18 FBO-10-MA and FBO-14-MA The slotted locking ring collar attaches the filter housing to the aluminum die cast filter head with four bolts. Metal hand knobs are provided for ease of maintenance. Powder coated components capable of F max design pressure. Steel filter bowl assembly, a manual vent valve, and a manual drain valve help provide ease of service especially significant given the FBO assembly s wide range of installations, including aviation fuel trucks, aviation fueling cabinets, diesel fuel dispensing systems, marine fuel docks, and fuel systems on large diesel engines. 1 1/2" NPT inlet and outlet. Mounting bracket included. LISTED Racor s FBO-10-MA and FBO-14 MA filter assemblies are designed to meet tough hydrocarbon refueling conditions and provide for ease of filter change-outs. The FBO assemblies can handle flow rates from 18 to 53 GPM (68 to 201 LPM) depending on filter specified and fuel being filtered (see chart below). Specifications FBO-10-MA FBO-14-MA Fuel Ports 1 1/2" NPT 1 1/2" NPT Max. Flow Rate see chart below Max. Working pressure F ( C) Clean Pressure Drop 1 PSI (0.07 bar) 1 PSI (0.07 bar) Height 18.8 in. (47.8 cm) 22.6 in. (57.4 cm) Width 8.6 in. (21.8 cm) 8.6 in. (21.8 cm) Depth 8.6 in. (21.8 cm) 8.6 in. (21.8 cm) Weight (approx.) 13 lbs (5.9 kg) 16 lbs (7.3 kg) Service Clearance 12.0 in. (30.5 cm) 16.0 in. (40.6 cm) Ambient Temp Range -40 to +255 F (-40 to +124 C) Max Fuel Temperature 190 F (88 C) FBO Replacement Filter Options Water Separator Water separator filters remove water and contaminants from hydrocarbon fuel streams and are the most popular filters. Silicone Treated Silicone treated fuel filters remove particle contaminants down to one micron. Silicone filters can also be used upstream, before a fuel filter/ water separator, to extend filter life. Water Absorber Water absorber filters absorb water and filter out contaminants from diesel fuel and other hydrocarbon streams. FBO Micron Rating Water Separator Silicone Treated (pre-filter) Water Absorber 1 FBO FBO FBO FBO-10 (6 X 10 Filter) 5 FBO FBO FBO FBO FBO FBO FBO FBO FBO FBO FBO FBO FBO-14 (6 X 14 Filter) 5 FBO FBO FBO FBO FBO FBO FBO FBO FBO

19 Fuel Polishing Carts Specifications Application Replacement Filter Flow Rate Power Requirements Height Width Length Weight Specifications Application Inlet/Outlet Connections Accessories Specifications FC-20-A1 FC-20-A2 FC-20-A3 25 Foot Heavy-Duty, Non-Kink Hose (2 required) FC V power generation, fuel transfer, and fuel storage 1.0 in. (2.5 cm) Cam Lock Replacement Filter see FBO replacement filter chart (page 18) Flow Rate (depending on fuel and filter used) Power Requirements Maximum Pressure Rating Height Width Length Weight (dry) Max. Fuel Operating Temperature Filter Cart With All Accessories FC V Power generation, fuel transfer, and fuel storage See FBO replacement filter chart 10.5 GPM (39.7 LPM) 3.4A / 110V / 60 Hz, 2A / 220V / 50 Hz 50.5 in (128.2 cm) 21.5 in (54.6 cm) 22.9 in (58.1 cm) 105 lbs (47.6 kg) Max. Fuel Operating Temperature 100 F (38 C) FC V Replacement Elements: Available Cartridges for FBO-10 Assemblies Micron Rating Water Separator Silicone Treated Water Absorber 1 FBO FBO FBO FBO FBO FBO FBO FBO FBO FBO FBO FBO to 20 GPM (64 to 76 LPM) 115 vac 15 amp 150 PSI (10 bar) 33.3 in. (84.6 cm) 23.7 in. (60.2 cm) 26.0 in. (66.0 cm) 95 lbs (43 kg) 100 F (38 C) FC V-KIT 4 Foot Service Probe (2 required) 25 Foot, Heavy-Duty Power Cord Filter Dolly FC V The Racor FBO Filter Dolly is a new lightweight mobile unit ideal for on-site cleaning of fuel storage and transport tanks. It incorporates state-of-the-art Racor fuel filter technology which removes potentially damaging contamination from your diesel fuel. Available with a range of filters from 1 to 25 micron it removes particles and water quickly and efficiently (pump flow rate of 10.5 GPM). The Filter Dolly will serve as a filtration and dispensing system that efficiently removes water and bacterial growth from diesel fuel that can damage pumps and injectors. The compact, lightweight cart can be maneuvered and operated by one person. The cart can run unattended, has maintenance alarms, and clogged filter & water level shutdown features. Fuel Polishing Cart FC V The Racor heavy-duty Fuel Polishing Cart is a cost effective way to filter diesel, jet fuels, mixtures of biodiesel, and other petroleum hydrocarbon fluids in storage or transport. This filter cart polishes, cleans up, and recycles old or contaminated fuel. It can be used in preventative maintenance practices to keep fuel tanks clean, or as a servicing unit to clean up fuel tanks that have become contaminated with rain, sea water, dirt, rust, and microbial growth. 19

20 Spin-On Protection At The Pump Start protecting your engine investment right at the pump. Racor s Fuel Dispensing Filters are essential for stationary and overhead tanks and mobile service vehicles. With their easy-to-install heads, they remove virtually 100% of the contaminants from diesel fuel. Racor FDW filters feature a super-absorbent, chemicallytreated media that absorbs 25 times its weight in water, locking it in as a barrier against free and emulsified water. There is no bypass valve which ensures that your engine is completely protected. As the media swells, it significantly reduces fuel flow rate, signaling a need to replace the filter. Racor offers filter protection down to 25 micron (nominal). Flow rates range from 15 to 100 GPM (57 to 379 LPM). Filter service is clean and easy, there s no cartridge to replace, just spin-on a new Racor filter. Filter Heads Part Number PFHH07500 PFFDH ** Port Size 3/4" NPT 1 1/4" NPT 1 1/2" NPT Filter PFFDW3525 PFFDW51125 PFFDW51125 (two filters required) Center Thread 1" 12 UNF 1 1/2" 16 UNF 1 1/2" 16 UNF Max. Flow Rate 15 GPM (57 LPM) 50 GPM (189 LPM) 100 GPM (379 LPM) Fuel dispensing filters can be used with diesel fuel or gasoline. ** dual head. Call Parker Hydraulic Filter Division to order ( ). Water Removing Filters Part Number PFFDW3525 PFFDW51125 Micron Rating Filter Size 3.7 D x 5.5 L 5.0 D x 11.0 L Center Thread 1" 12 UNF 11/2" 16 UNF Maximum operating pressure of fuel dispensing filter heads and water removing filters is 100 PSI (6.9 bar). 10 micron filters available through special order. 315OR and 325OR High Flow Filters High flow applications need not suffer with high maintenance... and Racor offers a range of ultra-high capacity, highly efficient fuel filter/water separators that also deliver spin-on convenience. As you'd expect, Aquabloc media is standard and all units provide flexibility in options to customize and meet specific operating conditions. Specifications Part Number 3150R 3250R Maximum Flow Rate 150 GPH (568 LPH) 250 GPH (946 LPH) Maximum Working Pressure 7 PSI (0.48 bar) 7 PSI (0.48 bar) Filter S3238 S3207T Port Size 7/8"-14 SAE 7/8"-14 SAE Height 13.6 in. (34.5 cm) 17.3 in. (43.9 cm) Width 5.0 in. (12.7 cm) 5.0 in. (12.7 cm) Depth 5.5 in. (14.0 cm) 5.5 in. (14.0 cm) Weight (approx.) 3.6 lbs (1.6 kg) 4.6 lbs (2.1 kg) Clean Pressure Drop 0.7 PSI (0.05 bar) 1.0 PSI (0.07 bar) Water Capacity (in bowl) 2.8 oz (82.8 ml) 2.8 oz (82.8 ml) Ambient Temp Range -40 o to +255 o F (-40 o to +124 o C) Maximum Fuel Temperature 190 F (88 C) 20

21 Crankcase Filtration In a robust, compact package, the patented Racor Closed Crankcase Ventilation (CCV) Filter Systems provide superior oil coalescence and crankcase pressure control under the most severe conditions. CCV systems eliminate crankcase emissions and provide a cleaner engine environment by performing the following functions: They reduce oil consumption by separating the oil from crankcase gases and returning the oil to the sump. The high-efficiency filter prevents fouling of the turbocharger and after-cooler. Keeps engine compartment and components clean. Filtered crankcase gas is returned to the engine intake system for re-combustion instead of polluting the environment. Pop-up style indicator that alerts of a bypass condition and the need for a filter change. A unique crankcase pressure regulator with integral bypass valve minimizes variation in crankcase pressure. Excessive variation in crankcase pressure can damage seals, cause loss of oil, and other problems. Left or right-hand inlet/outlet options. High-efficiency oil separation down to 0.3 microns. Durable glass-filled nylon and die cast aluminum components. Steel with epoxy powder coating. Stainless steel latches for tool-less filter change. Replaceable high-performance filter with depth-loading, micro-glass fiber coalescing media. Extended filter service interval from the Vaporbloc filter. Drain check valve allows collected oil to be returned to the crankcase. This eliminates frequent draining and significantly reduces oil consumption. 21

22 CCV Operation CCV systems operate by filtering contaminants and coalescing oil mist from crankcase gases. The crankcase breather hose is connected to the 3/4" inlet hose barb of the CCV assembly. The connection at the engine can be positioned at the valve cover or crankcase. Filtered air from the CCV assembly is plumbed to the air intake system between the air filter and turbocharger. Coalesced oil drains from the filter sump to an external drain. A check valve holds oil in the line until it is released to the oil pan via a hose connection. The pressure regulating valve protects the engine from excessive crankcase vacuum. The only routine maintenance required for the Racor Closed Crankcase Ventilation filter system is filter replacement. Typical service life of the high-performance filter in diesel applications is 750 hours. Some variations in service life occur depending on load profile, engine wear condition, flow, aerosol mass concentration of crankcase emissions, and soot concentration. 22 Specifications CCV4500 CCV6000 CCV8000 CCV12000 Maximum Flow Rate 10 CFM (283 LM) 20 CFM (566 LM) 40 CFM (1133 LM) 50 CFM (1416 LM) Maximum Engine Rating 400 HP (298.3 KW) 800 HP (596.6 KW) 1600 HP ( KW) 2000 HP ( KW) Inlet/Outlet Port Size 1 3/16-12 STOR 1 5/8-12 STOR 1 7/8-12 STOR 1 7/8-12 STOR Weight (approx,) 3.3 lbs (1.5 kg) 5.0 lbs (2.3 kg) 8.7 lbs (3.9 kg) 9.3 lbs (4.2 kg) Replacement Filter Media Density: Low Replacement Filter Media Density: High Replacement Filter Media Density: Ultra Housing Material CCV N/A N/A N/A CCV CCV CCV CCV CCV CCV CCV CCV Die cast head, glass-filled nylon and black powder epoxy-coated steel bowl. Die cast head, glass-filled nylon and black powder epoxy-coated steel bowl. Die cast head, glass-filled nylon and black powder epoxy-coated steel bowl. Die cast head, glass-filled nylon and black powder epoxy-coated steel bowl. Crankcase Pressure Regulator Integral Integral Integral Integral Bypass/Change Indicator Integral or Remote Integral or Remote Integral or Remote Integral or Remote Engine Block Check Valve Return Fitting 1/4 NPT 1/4 NPT 3/8 NPT 3/8 NPT Swivel Fitting (Qty.) #6 JIC (2 pcs.) #6 JIC (2 pcs.) #8 JIC (2 pcs.) #8 JIC (2 pcs.) Oil Drain Hose I.D in. (0.95 cm) in. (0.95 cm) 0.5 in. (1.27 cm) 0.5 in. (1.27 cm) Units can be manifolded to handle higher flow rates. Do not use CCV1500 in continuous duty applications.

23 Reduce Emissions Clean Up Engine Rooms and Engines Marine diesel engines can benefit from the installation of a combination Racor Closed Crankcase Ventilation (CCV) and Air Filter/Silencer System. The CCV contains Racor s high-performance Vaporbloc filter made of depth-loading, micro-glass fiber coalescing media. The marine Air Filter/ Silencer (AF) contains a washable media and is ruggedly built to provide an extended service life. How the Systems Work The engine crankcase breather is connected to the inlet of the Racor CCV assembly. The CCV outlet is connected to the engine s combustion air inlet via an air intake connector where filtered blowby gas is recycled through the combustion process. Oil collected in the CCV sump is returned to the crankcase through a hose and a drain check valve. Marine Engine Application Worksheet In order to determine the correct Racor CCV system for a particular application, certain engine information is required. A complete kit is composed of the following: 1. Racor CCV assembly 2. Fitting/Hose Kit 3. Air Intake Connector (Tap Sleeve or Marine Air Filter/Silencer Assembly) 1 Select the Racor CCV Assembly: Racor CCV application is determined by crankcase flow in cubic feet per minute or CFM. Flow on new engines is low but as the engine wears on, the CFM increases. Select the correct Racor CCV model by dividing the engine horsepower output by 40. Example: CAT 3116/260HP 40 = 6.5 CFM, select CCV4500 CAT 3406/525HP 40 = CFM, select CCV6000 Maximum Flow Rate CCV Model Flow CCV CFM (283 l/m) CCV CFM (566 l/m) CCV CFM (1133 l/m) CCV CFM (1416 l/m) Air Filter/Silencers The Racor Marine Air Filter removes contaminants introduced into the air from both outside and inside the vessel. Sand, salt, carpet fibers, and other contaminants are trapped in the oil-impregnated Vaporbloc filter media. The unique silencer housing design reduces turbo noise. An integral hose connection on the housing routes the clean blowby from the CCV back into the engine. A pop-up style indicator on the CCV assembly, alerts the operator of a bypass condition and the need for a CCV Vaporbloc filter change. Air Filter/Silencer comes standard with an integral vent port for CCV connection. Air filter media is washable; a cleaning kit is available. Optional tap sleeves for easy connection of existing air cleaner to CCV assembly. Prevents turbo and intercooler fouling. CCV units are designed to handle crankcase flow rates of up to 50 CFM (1416 l/m). Traditionally, the crankcase flow rate can be calculated as follows: Rated horsepower 40 = cubic feet per minute (CFM). This formula can only be used as a guide since recent improvements in piston design have produced engines with higher horsepower and lower blowby flow rates. The blowby flow rate of a worn engine, at time of overhaul, is generally double the flow rate when the engine is new. The flow rate of a worn engine is factored into the formula. Note: Specify left or right-hand inlet when ordering. 23

24 Cummins QSM11 marine engine with CCV cutaway John Deere Marine PowerTech engine with Racor CCV/AF System 2 Select a Fitting/Hose Kit: Fitting/Hose Kits come with both fittings and enough hose for the inlet and outlet sides of the Racor CCV assembly. Racor CCV filter units require straight thread o-ring hose barb fittings available only from Racor distributors. In order to determine the correct application, you will need to know the quantity and the outside diameter of engine breather(s)/hose connection. Fitting/Hose Kits are available in various sizes and hose configurations. 3 Air Intake Connector Select A, B, or C, Depending on Application: A. Tap Sleeve Tap sleeves connect the Racor CCV outlet to the engine s air intake. Determine the inside diameter of the hose between the turbo and the air cleaner. This will determine the outside diameter of the tap sleeve required for completion of the installation of your Racor CCV system. Verify all dimensions required of the tap sleeve before ordering. Example: John Deere #4045T Hose between turbo and air cleaner is 4" inside diameter. Correct tap sleeve is CCV40100, which is 4" outside diameter with a 1" OD hose barb. Tap Sleeves Tap Sleeve Dimensions O. D. Length Hose Barb CCV in. 5 in. 1 in. CCV in. 5 in. 1 in. CCV in. 6 in. 1.1/4 in. CCV60125* 6 in. 6 in. 1.1/4 in. *Note: CCV60125 includes a 1 1/4" x 1 1/2 bushing (connects to 1 1/2 ID hose). Part Number Hose B. Hump Hose Fittings: Use these with existing air cleaner-toturbo rubber adapters. CCV55540 CCV55113 CCV /4 in. 1 in. 1 1/4 in. C. Marine Air Filter Silencer Assembly. CCV /2 in. In order to determine the correct marine air filter application, you will need to know the engine s marine air filter rating (AFR) and provide the hose connection to turbo. Choose the correct marine air filter application per the following guideline. Verify that the marine air filter dimensions will fit into your engine room. 4-cycle engines: AFR = HP x cycle engines: AFR = HP x 2.5 Maximum Flow Rate Marine Air Filter Air Flow Rate AF M CFM (377 l/s) AF M CFM (566 l/s) AF M CFM (755 l/s) AF M CFM (944 l/s) 24 Marine Air Filter/Silencer (AF) System For more detailed information and for available hose kits, request technical manual number # Note: If AFR is close to maximum capacity of the marine air filter as listed above, use the next size larger. Example: DDC 12V92TA DDEC (2-cycle twin turbo): 826 hp x 2.5 = AFR per turbo = (2) AF M hp x 2.5 = AFR per turbo = (2) AF M CAT 3196 (4-cycle - twin turbo): 660 hp x 2.0 = AFR = (1) AF M Marine Air Filters (AF) typically correspond with the following CCV models, see chart. Marine Air Filter AF M AF M AF M AF M CCV Model CCV3500 or CCV4500 CCV4500 or CCV6000 CCV8000 CCV12000

25 Air Filter/Silencer Specifications AF M AF M AF M AF M701212** Max. Air Flow* 800 CFM (378 l/s) 1200 CFM (566 l/s) 1600 CFM (755 l/s) 2000 CFM (944 l/s) Outlet Diameter 4.0 in. (10.2 cm) 5.0 in. (12.7 cm) 6.0 in. (15.2 cm) 7.0 in. (17.8 cm) Filter AF M8040 AF M8050 AF M8060 AF M8070 Length 12.5 in. (31.8 cm) 12.5 in. (31.8 cm) 12.5 in. (31.8 cm) 12.5 in. (31.8 cm) Depth 9.6 in. (24.4 cm) 11.5 in. (29.2 cm) 13.5 in. (34.3 cm) 13.5 in. (34.3 cm) Hose Barb Size 1.0 in. (2.5 cm) 1.25 in. (3.2 cm) 1.25 in. (3.2 cm) 1.0 in. (2.5 cm) Weight 4.2 lbs (1.9 kg) 5.0 lbs (2.3 kg) 8.0 lbs (3.6 kgs) 8.0 lbs (3.6 kgs) Operating Temperature -40 to +240 F (-40 to +116 C) *Values given are cubic feet per minute (CFM) and liters per second (l/s). **AF M is available with a 1.25 in. hose barb. Air Filter Replacements Racor offers direct replacements for the intake air filter portion of competitive air filters/silencers. Also available is the replacement filter for the vacuum limiter air separator. Competitor Part Number Racor Part Number Dimensions D x H x D CD170 AF M x 8 x 10 CD174 AF M x 6 x 7.5 CD175 AF M x 7 x 7.5 CD178 AF M x 10 x 7.5 CD180 AF M8010 3" Air Separator CD183 AF M x 12 x 12 CD184 AF M x 14 x CD185 AF M x 14 x 7 CD186 AF M x 7 x 12 CD189 AF M x 14 x 12 CD190 AF M x 10 x CD195 AF M x 8 x CD196 AF M x 9 x 7 CD197 AF M x 12 x 6.88 CD200 AF M x 9 x 9 CD201 AF M x 12 x 9 The filter media for all replacement filters is an oilimpregnated cotton gauze and is sandwiched between pleated, epoxy-coated aluminum wire-mesh with polyurethane sealing surfaces. This product is cleanable and must be oiled before re-using. Washing and Re-oiling Kit AF M

26 Eliminate Fuel Vent Line Overflow During Refueling ECO Friendly How They Work LG50 (for gasoline) Stage 1: Venting tank fuel is diffused by the flow diverter and air is allowed to bypass the diverter. Fuel is directed back into the fuel tank. Stage 2: Vapor collects on the interior surfaces and coalesces. The fuel returns downward by gravity and air continues up and out of the unit. LG100 (for diesel/gasoline) Stage 1: Venting tank fuel is diffused by the flow diverter and air is allowed to bypass the diverter. Fuel is directed back into the fuel tank. Stage 2: Fuel de-foams through a fine wire mesh screen which filters out large contaminates. Under the screen, the fuel collects temporarily until it can freely flow back to the fuel tank. Next time you fill up, watch your fuel vent line. A typical refueling will send up to half a gallon or more of fuel spilling overboard. Fuel spillage is not only expensive, it s absolutely deadly to fragile lakes, rivers, and waterways. Also, USCG and other regulations prohibit the discharge of oils with civil and criminal penalties. Installed in the fuel tank vent line, the Racor Fuel/Air Separator efficiently separates air from fuel forced into the line. Air is vented, and all fuel is returned to the tank. The Fuel/ Air Separator captures fuel normally discharged due to agitation and thermal expansion up to 2.4 PSI (0.17 bar). It also eliminates damage to expensive striping, labels, and protects finishes from fuel stains. The unit is also maintenance free there s nothing to rust or corrode. The Racor Fuel/Air Separator fits neatly into your vent line, actually replacing a section of the line and fittings are included with each kit. One Fuel/Air Separator unit is required for each vent line. Fuel/Air Separators fit 5/8" vent lines, 1/2" fittings are available. Stage 3: Vapor collects on the interior surfaces and coalesces. The fuel returns downward by gravity and air continues up and out of the unit. 26 Note: The safety relief valve includes a floating check ball which will not permit a large in-rush of fuel to bypass. In the event of internal pressure reaching 2.4 PSI (0.17 bar), the spring will compress and open the safety seat. Specifications LG50 LG100 Application: Gasoline Diesel Maximum Air Flow 12 CFM (340 l/m) 17 CFM (481 l/m) Hose Barb 1 5/8 5/8 Thermal Expansion Up to 2.4 PSI (0.17 bar) Up to 2.4 PSI (0.17 bar) Height 6.0 in. (15.2 cm) 9.8 in. (24.9 cm) Diameter 1.8 in. (4.6 cm) 4.0 in. (10.2 cm) Weight (dry) 1.2 lbs (0.5 kg) 1.6 lbs (0.7 kg) Yes No Notes: 1 Order part RK for 1/2 NPTF threaded fitting) Yes Yes

27 Reservoir Breather Filters Reservoir breather filters provide precision hydraulic components with special protection against wear particles and destructive moisture. The use of reservoir breather filters is especially critical in high-humidity areas or where Specifications Hydraulic Filters moisture is present near hydraulic systems. Racor reservoir breathers contain a unique filter media which removes both dirt and moisture. The spin-on design provides ease of service. Specifications PFHW57RB PFH5526 Micron Center Thread 1 1/2"-16 UNF 1 1/2"-16 UNF Diameter 5.0 in. (12.7 cm) 3.7 in. (9.4 cm) Length 7 in. (17.8 cm) 5.3 in. (13.5 cm) Replacement Hydraulic Filters Par Fit hydraulic filters are interchangeable with most competitors filters to allow customers to acquire all their replacement filters from one quality source. Racor Par Fit hydraulic replacement filters conform to all the same rigorous tests as the standard replacement filters and are designed to efficiently filter contaminants out of hydraulic fluid. For a full list of cross reference part numbers, request bulletin Part Number PFHW5710 PFHW51110 Flow rate 50 GPM (189 LPM) 50 GPM (189 LPM) Threads 1 1/2-16 UNF 1 1/2-16 UNF Diameter 5.0 in. (12.7 cm) 5.0 in. (12.7 cm) Length 7 in. (17.8 cm) 11 in. (27.9 cm) Pressure 100 PSI (6.9 bar) 100 PSI (6.9 bar) See chart below for mounting head information. Type 1 Type 2 Type 3 Mounting Heads (multi port head) Part Number Head Type Port Size Center Thread By-pass Setting (PSID) Maximum flow rate for the heads below is 15 GPM (56 LPM) and up to 175 PSI (12.1 bar) PFHH /4 NPTF 1-12 UNF 3 PFHH /4 NPTF 1-12 UNF 15 PFHH /4 NPTF 1-12 UNF 25 Replacement Filter PFFDW3825 PFHH12525R /4" NPTF 1 1/2"-16 UNC 25 PFHW51110 PFHH12515MP 3 1 1/4" NPTF 1 1/2"-16 UNC 15 PFHH12525MP 3 1 1/4" NPTF 1 1/2"-16 UNC 25 1 Right hand flow. PFHW

28 Built to Last RUGGED CONSTRUCTION, EASY INSTALLATION AND TOOL-LESS SERVICE ARE TRADEMARKS OF ADVANCED RACOR DESIGNS. The Absolute Series introduces a new standard for system performance and reliability by purifying oils in engine, transmission and hydraulic systems. The top load Absolute Oil Cleaner can be specified for 30 and 50 quart applications and each is easily connected to the corresponding lubricating oil system. Beyond the filtration of solid particles, the Absolute Series provides important benefits that extend full flow filter life as well as reducing maintenance by maximizing water absorption, removal of sludge, resins and soot. THE CLEAR AND ABSOLUTE BENEFITS Removes up to 99% of all solid contaminates Reduces the water concentration to less than 100 ppm Eliminates damaging resins and oxidation products Extends oil change intervals 2 to 4 times fewer expensive full flow filter cartridges Extends the life of all engine components Provides a significant reduction of oil consumption and oil disposal cost An important decrease of equipment down time Rugged design Will not void engine warranty Reduces operating cost and increases profits The intricately channeled base provides a large footprint to fully support the element under pressure, ensuring uniform loading of the element. Ultra-clean oil flows through the channels into the clean oil stream. Tool-less access and easy service via the classic Racor T-handle. A multi-layered engineered cellulose media presents a massive surface area to remove solid contamination and emulsified water. The result is both exceptional dirt holding capacity and removal of water concentration to less than 100 parts per million. Racor offers 3, 5, 10 micron replacement elements to further tailor to filtrations needs. No other company offers so many choices. The engineered base design at the bottom of the Absolute housing supports the element under high pressure and provides a channeled migration path for clean oil to flow back into the primary oil stream. Racor offers Parker UL-Rated hose and high quality fittings and adapters. The Absolute Oil Cleaner is designed as a top load filter, but can be mounted at any angle using the heavy duty mounting bracket. 28

29 REPLACEMENT FILTERS Specifications ABS10300 ABS10450 Maximum Pressure 72.5 PSI (5 bar) 72.5 PSI (5 bar) Capacity 30 qts (28 L) 50 qts (47 L) Port Size (inlet/outlet) 1/4" NPTF 1/4" NPTF Dimensions W6.38 x H12.48 in. (W162 x H317 mm) W8.03 x H12.64 in. (W204 x H321 mm) Weight 10 lbs (4.5 kg) 15 lbs (6.8 kg) Seal Kit ABS44235 ABS44250 ABS10300 ABS20330 ABS20370 ABS25350 ABS10450 ABS20430 ABS20470 ABS micron filter (Green) 5 micron filter (Blue) 10 micron filter (Orange) 3 micron filter (Green) 5 micron filter (Blue) 10 micron filter (Orange) High Volume Footprint ø 0.5 in. (12.7 mm) 4 holes 10.6 in. (269 mm) Specifications ABS11200 ABS11300 Housing Material Stainless Steel Stainless Steel Application Capacity 100 qts (94.6 L) 150 qts (142.0 L) Port Size 1/2" NPTF 1/2" NPTF Dimensions Replacement Filters W9.3 x H24.41 in. (W236 x H620 mm) (use two) ABS20430 (3 micron) ABS20470 (5 micron) ABS25450 (10 micron) W9.3 x H30.12 in. (W236 x H765 mm) (use three) ABS20430 (3 micron) ABS20470 (5 micron) ABS25450 (10 micron) Weight 22 lbs (10.0 kg) 28.7 lbs (13.0 kg) V-band ABS50030 ABS50030 Packing ABS50070 ABS50070 O-ring ABS50057 ABS50057 High Capacity Absolute Series Oil Cleaners are space-efficient, with footprints from just 8" to 19", and heights from 24" to 50". Footprint ø 0.5 in. (12.7 mm) 4 holes 10.6 in. (269 mm) High Volume Specifications ABS11400 ABS11410 ABS10515 Housing Material Carbon Steel Carbon Steel Carbon Steel Application Capacity 100 qts (94.6 L) 150 qts (142.0 L) 250 qts (236.6 L) Port Size 1/2" NPTF 1/2" NPTF 1.0" NPTF Working Pressure 73 PSI (5.0 bar) 73 PSI (5.0 bar) 73 PSI (5.0 bar) Dimensions Replacement Filters W11.81 x H23.62 in. (W300 x H600 mm) (use two) ABS20430 (3 micron) ABS20470 (5 micron) ABS25450 (10 micron) W11.81 x H29.25 in. (W300 x H743 mm) (use three) ABS20430 (3 micron) ABS20470 (5 micron) ABS25450 (10 micron) W18.9 x H50.0 in. (W480 x H1270 mm) (use three) ABS20430 (3 micron) ABS20470 (5 micron) ABS25450 (10 micron) Weight 40 lbs (18.1 kg) 48.5 lbs (22.0 kg) 196 lbs (89.0 kg) Packing Spacer ABS50072 ABS O-ring ABS50082 ABS50082 ABS

30 OilCheck LFS RK761 The oil monitor measures the effects of contaminants and the electro chemicals that occur in synthetic and petroleum based oils. This is achieved by detecting and measuring the oil s dielectric constant. By comparing the measurements obtained from used and unused oils of the same make and grade, the oil monitor is able to determine the degree of change in the oil s dielectric constant. Dielectric change is directly related to the contamination level and degradation of the oil and may allow the user to achieve longer intervals between oil changes and immediately detect increased mechanical wear and coolant dilution, resulting in the loss of the oil s lubricating properties. Time Frame: 5-10 Minutes Fluid Types: Engine Oil Transmission Fluid Hydraulic Fluid Marine Rated Hose No-Skive Hose and Fittings No-Skive hose and fittings do not require removal of the outer hose cover, eliminating premature failure caused by skiving too long or short. Use of No-Skive hose and fittings keeps outer cover intact, protecting vulnerable wire wrap during fitting assembly. Cushioned grip increases hose life supporting cushion of compressed rubber between gripping threads on fitting reduces wire movement, minimizing stress. High-tensile steel wire braid. Corrosion Protection steel wire braid of No-Skive hose is never exposed because outer rubber cover is not removed before assembling fitting. No-Skive fittings allow socket threads to penetrate outer hose cover, and grip the wire braid of the hose. Simple two step assembly attach socket to hose, thread nipple to socket. Packaged in 350-foot reels or 50-foot kits. Passed 2 1/2 minute fire test. 500 PSI working pressure. Parker Marine Hose is a USCG-rated hose for gasoline, diesel, lube oil, and hydraulic systems for commercial and recreational applications. As you d expect, it delivers test-proven performance in a wide operating temperature range and constant working pressure. It is of a long-lasting reinforced construction, kink and cut resistant, and compatible with a variety of standard 100R5 fittings. Fire-Resistant Marine Hose Meets SAE J1527, Type A, Class 1, and SAE J1942 Standards Part Number Hose I.D. Hose O.D. Working Pressure Burst Pressure Min. Bend Radius Weight (per foot) Inches of Mercury in. cm in. cm PSI mpa PSI mpa in. cm lbs/ft kg/m Hg kpa CGH-5 1/ CGH-6 5/ / CGH-8 13/ / CGH-10 1/ / CGH-12 5/ / CGH-16 7/ /

31 Water Detection Probes RK23191 Stainless Steel WIF Probe ABS Marine Type Approved, Cert. #11-HS PDA. UL Marine Listed, 168Y. Meets requirements of ISO19921 fire resistance test. Robust 303 stainless steel and ceramic design. One inch (1") hex drive body, over 3 in. (7.6 cm) long. 1/2"-20 straight threads with SAEJ1926 sealing design. FKM o-ring material for durable service life. Detachable Packard GT-Series connector and 36" long wiring loom. Stainless Steel Water In Fuel (WIF) Probe The new all-steel and ceramic water in fuel (WIF) probe was designed to meet new IMO Marine Requirements. Racor s new RK23191 water probe can be used with all of our American Bureau of Shipping (ABS) and Underwriters Laboratories, Inc. (UL) Marine products. This passive probe design has a 303 stainless steel housing which captivates a ceramic insulator and stainless probe tip. The housing features a durable plastic connector housing to attach to an external pigtail harness with yellow and black 18 AWG wires (no polarity). Water Probes Racor offers a wide selection of water in fuel (WIF) detection systems, each designed for specific filter assemblies and installation requirements. Water probes simply provide metal pin tip entry into a water collection bowl. Some contain no active electronics and require an external electronic detection module to detect water. Electronic Detection Modules Detection modules have internal electronics that pass a small current across special metal pins. When water bridges the pin tips, a solid state switch is activated allowing a larger current to flow to drive a light or provide a signal to an engine computer. Electronic detection modules will automatically reset once water is drained away from the probe tips. Detailed instructions are supplied with every WIF sensor and electronic detection module see page 33. L L L L L L L L 2.5 in. (6.4 cm) Specifications RK RK RK55617 RK30880E** RK ** RK RK Mating Connector Delphi Packard Delphi Packard Delphi Packard N/A Racor Yazaki None None Thread Size 1/2-20 UNF Volts 12 or or or or or 24 Probe Tips Wire Length (L) Internal Resistor Gold Plated Nickel 8.0 in. (20.3 cm) Beryllium Copper 6.0 in. (15.2 cm) Beryllium Copper 6.0 in. (15.2 cm) Beryllium Copper 8.7 in. (22.1 cm) Beryllium Copper 8.0 in. (20.3 cm) Beryllium Copper 11.0 in. (27.9 cm) Stainless Steel 8.0 in. (20.3 cm) Stainless Steel 8.5 in. (21.6 cm) 220K ohm 220K ohm 220K ohm 82.5K ohm Amplifier Amplifier None None Application Cummins - John Deere Cummins All Hino All All Output To Ground To Ground - - ** These WIF probes have a built-in water detection module. 31

32 Vacuum/Compound Gauge Kits Vacuum and Compound (vacuum/pressure) gauges and related hardware are available to monitor filter condition. As the filter slowly becomes clogged with contaminants the restriction (resistance to flow) increases. The fuel pump still tries to draw fuel (suction) but because of this restriction less fuel is delivered to the engine and instead more air is pulled from it (fuel degassing). These results can cause the engine to lose power and eventually stall. By installing a vacuum gauge in your fuel system (on the outlet side of the Racor filter) visual monitoring of filter condition is possible at a glance. Note the position of the dial, or apply the red line decal provided with most kits. This will assist in easy monitoring as filter efficiency begins to decrease when a filter change is necessary. Note: Intervals of filter changeout may vary depending on fuel cleanliness. Always keep a spare Racor filter on hand. Accessories Enhance Your Fuel Systems Performance and Ease of Service When is My Engine Air Filter Used Up? Because it performs so well, it is not uncommon for the engine air filter to appear as if it has reached its capacity. The only way to know when the engine air filter has reached it's capacity is to measure the restriction at service. Part No. Description Tread Size RK B Vacuum Gauge, Silicone Dampened, 2" dial, 0-30 inhg. (0-15 PSI) Vacuum Gauge Kit. Gauge (RK 11233), one , And One Fitting 1/4" NPT Back Mount With Bracket 1/4" NPT Back Mount With Bracket Adapter Fitting 1/8"MNPT x #4 (1/4") Hose Adapter Fitting 1/4" NPTM x 1/8" NPTF An effective way to verify restriction is with a filter restriction monitor. A restriction monitor will provide a quick and accurate assessment of the air filter s condition and remaining service life. Standard Filter Monitor Part Numbers Part Number Range (In. water vac.) Description A 8-15 inhg (27-51 kpa) Direct Mount A 8-20 inhg (27-68 kpa) Direct Mount A 8-25 inhg (27-85 kpa) Direct Mount A 8-25 inhg (27-85 kpa) Direct Mount w/ 90 Fitting B 4-25 inhg (14-85 kpa) Remote Mount A 8-25 inhg (27-85 kpa) Dash Mount A Unit standard with a 1/8"-27 NPT straight fitting. B Unit standard with a 90 coupling and 10' hose. RK E Vacuum Gauge With 2" Dial, Rotating Bezel, And Red Tell-Tale Pointer. O-30 inhg. (0-15 PSI) 1/4 NPT Bottom Mount RK T-Handle Vacuum Gauge (for 500FG Turbine series fuel filter/water separators) 1/4" NPT x 3/4" Fitting Threads RK T-handle Vacuum Gauge (for 900 and 1000 Turbine series fuel filter/water separators) 1/4" NPT x 1" Fitting Threads PFHG15LF 30/60 PSI Gauge RK UL-Listed Brass Drain Valve 1/4" NPTF 32

33 Water Detection Modules & Kits Racor Water Detection Kits are available in a wide selection for various installation requirements. Under-dash, in-dash, and remote mount, these solid-state units may be used with any Racor fuel filter/ water separator and water probe. They are manufactured using the highest quality materials and are all 100% electrically tested. An electronic detection module analyzes electrical resistance at the water probe and determines if water is present. If so, the detection module operates to indicate water, based on its features listed below. All units reset automatically after water is removed (unless specified). Caution: The water probe and detection modules work with 12 or 24 volts, direct current only and should never be wired to other brand modules or household 110 or 220 volts, alternating current. Use the guide below to find the correct detection module for your application. Part Number Description Voltage Image RK Under-dash water detection module. Light illuminates and alarm sounds when water is detected. Water must be drained to reset light and stop alarm. Plastic enclosure measures: 1.38 square x 1.25 deep. Water probe included. 12 vdc RK Same as above 24 vdc RK Under-dash mount water detection module. Light only. Green ON lamp illuminates with power on. Red DRAIN lamp illuminates when water is detected. Initial power-up self diagnosis feature and circuit protection included. Plastic enclosure measures: 2.75 x 1 x 1.5. Water probe included. 12 vdc RK Same as above 24 vdc RK gauge-type water detection module. Light and audio. Red DRAIN lamp illuminates and horn sounds when water is detected. Initial power-up self diagnosis feature and circuit protection included. Plastic case, satin black dial with white lettering. Water probe included. 12 or 24 vdc RK gauge-type water detector and filter restriction module. Includes pre-set vacuum switch (7 inhg), connector, and outlet adapter fitting. Red DRAIN or CHANGE FILTER lamp illuminate and horn sounds when water is detected. Water probe included. 12 or 24 vdc Remote detection unit sends 12 VDC hot (+) signal when an input ground signal (from a water probe or RK a vacuum switch not included) is received. Must be used with a relay to power a horn or indicator 12 vdc lamp (if draw is over 1 amp). Plastic enclosure measures: 3 x 2.5 x.75 RK Same as above 24 vdc Under-dash mounts same as RK but sends a ground ( ) signal. Enclosure size is same as RK above. 12 vdc RK Vacuum Switch Kit Non-adjustable, Normally Open contacts close at 7 inhg (3.4 PSI) 1/8"-27 NPT threads. For use with all models. N/A RK Vacuum Switch Connector Kit Molded connector with single 18 AWG., 18" blue wire lead. N/A RK30880E This kit includes new and enhanced detection electronics built into the probe body and works with 12 or 24 volt DC systems. Water probe and detection module all in one. 12 or 24 vdc 1 Clear collection bowl must have a 7/8 SAE port. 33

34 WARNING: Failure or improper selection or improper use of the products and/or systems described herein or related items can cause death, personal injury, and property damage. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for the products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety, and warning requirements of the application are met. The products described herein, including with limitation, product features, specification, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice. Parker s Product Information Center Parker Hannifin has become a world leader in motion and control technology by providing premier customer service. That s what our Product Information Center is all about. Our experienced agents are ready to provide you with the product identification and referral service you need. Emergency breakdown calls are relayed via pager to agents on call who will respond promptly. Non-emergency calls are recorded and answered the next business day. Tap Into the Knowledge Network Every agent has access to extensive computer databases referenced by part number and product category. Information encompassing 200 worldwide facilities, 400 product lines, and 1,200 market segments is at their fingertips. Our goal is to make it as easy as possible for you to do business with Parker. Language Line Service By using the Language Line Service, we can access interpreters for more than 140 languages immediately. Handling non-english-speaking inquiries is not a problem! Product Information Center Parker Racor Division Quality Management System Certifications ISO/TS 16949: 2002 ISO 14001: 2004 U.S., Canada, Mexico call: C-Parker ( ) Fax: (440) c-parker@parker.com Hours: Monday Friday 8:00 a.m. to 6:30 p.m. EST Saturday 7:00 a.m. to 12:00 p.m. EST For Service within Europe: From AU, CH, DE, EI, FR, and UK, call: All other countries, call: English speaking service German speaking service French speaking service Fax: epic@parker.com Hours: Monday Friday 08:30 to 18:00 CET 34

35 Parker s Motion & Control Technologies At Parker, we re guided by a relentless drive to help our customers become more productive and achieve higher levels of profitability by engineering the best systems for their requirements. It means looking at customer applications from many angles to find new ways to create value. Whatever the motion and control technology need, Parker has the experience, breadth of product and global reach to consistently deliver. No company knows more about motion and control technology than Parker. For further info call C-Parker ( ). AEROSPACE Key Markets Aircraft engines Business & general aviation Commercial transports Land-based weapons systems Military aircraft Missiles & launch vehicles Regional transports Unmanned aerial vehicles Key Products Flight control systems & components Fluid conveyance systems Fluid metering delivery & atomization devices Fuel systems & components Hydraulic systems & components Inert nitrogen generating systems Pneumatic systems & components Wheels & brakes CLIMATE CONTROL Key Markets Agriculture Air conditioning Food, beverage & dairy Life sciences & medical Precision cooling Processing Transportation Key Products CO 2 controls Electronic controllers Filter driers Hand shut-off valves Hose & fittings Pressure regulating valves Refrigerant distributors Safety relief valves Solenoid valves Thermostatic expansion valves ELECTROMECHANICAL Key Markets Aerospace Factory automation Food & beverage Life science & medical Machine tools Packaging machinery Paper machinery Plastics machinery & converting Primary metals Semiconductor & electronics Textile Wire & cable Key Products AC/DC drives & systems Electric actuators Controllers Gantry robots Gearheads Human machine interfaces Industrial PCs Inverters Linear motors, slides and stages Precision stages Stepper motors Servo motors, drives & controls Structural extrusions FILTRATION Key Markets Food & beverage Industrial machinery Life sciences Marine Mobile equipment Oil & gas Power generation Process Transportation Key Products Analytical gas generators Compressed air & gas filters Condition monitoring Engine air, fuel & oil filtration & systems Hydraulic, lubrication & coolant filters Process, chemical, water & microfiltration filters Nitrogen, hydrogen & zero air generators FLUID & GAS HANDLING Key Markets Aerospace Agriculture Bulk chemical handling Construction machinery Food & beverage Fuel & gas delivery Industrial machinery Mobile Oil & gas Transportation Welding Key Products Brass fittings & valves Diagnostic equipment Fluid conveyance systems Industrial hose PTFE & PFA hose, tubing & plastic fittings Rubber & thermoplastic hose & couplings Tube fittings & adapters Quick disconnects HYDRAULICS Key Markets Aerospace Aerial lift Agriculture Construction machinery Forestry Industrial machinery Mining Oil & gas Power generation & energy Truck hydraulics Key Products Diagnostic equipment Hydraulic cylinders & accumulators Hydraulic motors & pumps Hydraulic systems Hydraulic valves & controls Power take-offs Rubber & thermoplastic hose & couplings Tube fittings & adapters Quick disconnects PNEUMATICS Key Markets Aerospace Conveyor & material handling Factory automation Food & beverage Life science & medical Machine tools Packaging machinery Transportation & automotive Key Products Air preparation Compact cylinders Field bus valve systems Grippers Guided cylinders Manifolds Miniature fluidics Pneumatic accessories Pneumatic actuators & grippers Pneumatic valves and controls Rodless cylinders Rotary actuators Tie rod cylinders Vacuum generators, cups & sensors PROCESS CONTROL Key Markets Chemical & refining Food, beverage & dairy Medical & dental Microelectronics Oil & gas Power generation Key Products Analytical sample conditioning products & systems Fluoropolymer chemical delivery fittings, valves & pumps High purity gas delivery fittings, valves & regulators Instrumentation fittings, valves & regulators Medium pressure fittings & valves Process control manifolds SEALING & SHIELDING Key Markets Aerospace Chemical processing Consumer Energy, oil & gas Fluid power General industrial Information technology Life sciences Military Semiconductor Telecommunications Transportation Key Products Dynamic seals Elastomeric o-rings EMI shielding Extruded & precision-cut, fabricated elastomeric seals Homogeneous & inserted elastomeric shapes High temperature metal seals Metal & plastic retained composite seals Thermal management 35

36 Your complete source for quality tube fittings, hose & hose fittings, brass & composite fittings, quickdisconnect couplings, valves and assembly tools, locally available from a worldwide network of authorized distributors. Fittings: Available in inch and metric sizes covering SAE, BSP, DIN, GAZ, JIS and ISO thread configurations, manufactured from steel, stainless steel, brass, aluminum, nylon and thermoplastic. Hose, Tubing and Bundles: Available in a wide variety of sizes and materials including rubber, wire-reinforced, thermoplastic, hybrid and custom compounds. Worldwide Availability: Parker operates Fluid Connectors manufacturing locations and sales offices throughout North America, South America, Europe and Asia-Pacific. For information, call toll free... For C-PARKER information, call For ( ) information, call The Hope Group Branch Locations Branch Locations Massachusetts Maine North American Divisions Fitchburg Parker Energy Products Division Bangor Store Stafford, TX 58 phone Parker Crawford StoreStreet Tel: fax Perry 281 Road Fax: Tel: Fluid Fax: System Connectors Northborough Division Corporate Otsego, MI LewistonHeadquarters phone fax Parker Bearfoot StoreRoad Tel: Enterprise Street Fax: Hose Tel: Products Division Wickliffe, Fax: OH Weymouth phone Parker fax South Store Portland 50 Industrial Parker Finnell Store Drive, Unit Hose Division Tel: Wickliffe, 5 Wallace OH Avenue Fax: phone Tel: fax Fax: Rhode Island Parflex Division Ravenna, OH phone New Hampshire Cranston fax Parker Manchester Store 215 Quick Parker Niantic Store Coupling Avenue Division Tel: Minneapolis, Candia Road MN Fax: phone Tel: fax Fax: Tube Fittings Division Connecticut Columbus, OH phone N fax orth Haven The Hope Group - No. Haven 350 Sackett Point Road Tel: Fax: Maine Massachusetts Distribution Service Centers Bangor Buena Park, CA Fitchburg Parker Store phone fax Parker 257 Perry Store Road Tel: Crawford Street Conyers, Tel: Fax: GA phone Fax: fax Lewiston Northborough Parker Store Louisville, KY phone Corporate 14 Enterprise 502 Headquarters Street fax 70 Tel: Bearfoot Road 4180 Tel: Fax: Portland, Fax: OR phone South 503 Portland fax Weymouth Parker Store Toledo, Parker 5 Wallace Store Avenue OH phone 50 Tel: Finnell Drive, Unit fax Tel: Fax: fax Fax: (FCG Kit Operations) New Hampshire Canada Grimsby, Rhode ONT Island Manchester phone fax Cranston Parker Store (Contact Parker 880 Candia Store Grimsby Roadfor other Service 215 Tel: Niantic Center Avenue locations.) Tel: Fax: Fax: The Hope Group 70 Bearfoot Road Northborough, MA Phone: Fax: ISO 9001:2008 Certified ITAR Registered