Haakon Ellingsen AS Årenga 8, N-1340 Skui P.O. Box 184, N-1309 Rud Phone Fax

Size: px
Start display at page:

Download "Haakon Ellingsen AS Årenga 8, N-1340 Skui P.O. Box 184, N-1309 Rud Phone Fax"

Transcription

1 NORWEGIAN DISTRIBUTOR: Ellingsen NOR INSTRUMENTS Haakon Ellingsen AS Årenga 8, N-1340 Skui P.O. Box 184, N-1309 Rud Phone Fax post@ellingsen.biz EFS2000-BU-E Rev.1 - Sep 2010 Biffi Italia s.r.l. Headquarters, Sales department, Fiorenzuola d Arda - Italy tel fax biffi_italia@biffi.it website:

2 Product Brochure 2000 EFS2000: the hi-tech electric fail-safe actuator A simple electric actuator designed and engineered to operate safety valves with ICON2000 advanced and reliable solutions

3 Features More than half a century ago Biffi started its business in valve actuation. Its world-wide leadership has been built through continuous innovation and the ability to face the new challenges that a fast changing environment comes up with. It was in 1992 that Biffi started its intelligent actuator campaign. Since then Biffi Intelligent actuators have been welcomed by all major companies around the world, in many different applications: platforms, deep tropical forest, Siberian chill and harsh desert environment. With ICON2000, we made a further step forward towards ease of use and maintenance. Release 2004 of ICON2000 introduces a new philosophy in the construction of electric actuators electronic cards: all major optional functions are integrated in the base card, which allows easy plug-in of future upgrades. EFS2000 is the latest step in the acknowledgement of Biffi product quality and reliability. EFS2000 integrates in one single actuator all the advanced technological solutions of the ICON2000v4 with a strong and reliable spring-return mechanism for safe applications. The EFS2000 is an Electric Quarter Turn Spring Return Actuator which has the purpose to close or open a valve in emergency conditions, when an ESD alarm signal occurs or when motor power supply fails. Actuator operation, setting and diagnostics are available via the integral user-friendly pushbutton panel Bluetooth TM, radiofrequency wireless connector based on a qualified Bluetooth TM class 1 module(*) available as standard Watertight and explosion-proof PDAs are available from Biffi Italia for actuator operation, download of diagnostic info, non-intrusive upgrading of firmware and for maintenance purposes through Bluetooth TM Enhanced hardware and software performances to offer: - advanced maintenance data including reports on the last opening and closing position/torque curves with relative parameters and with direct comparisons with reference curves; - detailed and updated information on actuator internal parameters with precise and clear alarm reports, with both General and Recent (partial) log; - Data logger function for collecting different types of data for maintenance or diagnostic programs, available both in: RECORDER mode for measurement and memorization of main actuator internal parameters with configurable SAMPLING TIME and START DATE and TIME EVENT mode with memorization of OPEN or CLOSE commands, including indication of source, date and time with configurable START DATE and TIME T-RECORDER mode for measurement and memorization of torque and temperature with configurable SAMPLING TIME, START DATE and TIME. STOP of recording in case of torque alarm. 2 (*) US and Italy patented Bluetooth is a trademark of Bluetooth SIG, Inc., USA

4 Customized displays: - Numeric: 3 1 / 2 digits, for the indication of position or torque - Graphic: 32x122 dots, for a complete diagnostic user-friendly communication with the operator - Backlights - Heater - 8 selectable languages as standard A single enhanced-type terminal board Advanced open bus communication protocols: - Lonworks - Profibus DPV0, DPV1 and Redundant DPV1 - Foundation Fieldbus - Modbus - Hart Diagnostics Internal circuits continuously monitor the status of the system and elaborate all the information coming from the sensors: diagnostic messages are displayed in one of the available languages, so that there is no need to decipher complicated codes. The set of messages is complete both with alarms and warnings. Partial Stroke Test (PST) The PST is proposed as an essential part of the diagnostics. Through a specific procedure a partial stroke test function can be carried out to check the functionality of the essential parts achieve the EFS safety function while the valve/actuator is in line and in service. SIL Certified.. Suitable for use in SIL 3 applications following IEC / IEC TUV Certified. 3

5 The EFS2000 actuator consists of six main parts: 1. a spring return mechanism, which moves the valve in the foreseen fail-safe condition when requested by an ESD signal or by a motor power failure. 2. a multiturn electric actuator which operates, through an epicyclic gear reduction (3) the valve during normal working conditions and in the mean time compress the spring when the operation is in opposite direction to the fail safe direction. 3. an epicyclic gear reduction, which increment the torque of the multi turn actuator and transform the stroke into a quarter turn value. 4. an electro-magnetic clutch which hold in position the female wheel of epicyclic gear (3) during the normal operation and release it in case of fail-safe function. 5. an hydraulic control group which is necessary to adjust the fail-safe speed and to manually operate the actuator by means of a hand-pump in case of power failure. 6. a local control and configuration panel which is utilised to configure the functional parameters and to operate locally (OPEN/CLOSE/OFF-EMERGENCY/RESET) the actuator when electric power is present. Working Principle The spring return system is kept in fail safe position by helical springs. During the normal operation the multi-turn turn electric actuator transmits the movement to the valve through the epicyclic gearing reduction and to the spring return mechanism through the rack. Spring return mechanism is based on rack-pinion mechanism; the rack is connected in one side to the spring and in the other side to the hydraulic cylinder; pinion of rack-pinion mechanism is connected to the valve stem. Input shaft of the epicyclic gearing reduction is connected the multi-turn actuator output shaft; output shaft of the epicyclic gearing reduction is connected to the pinion of rack-pinion mechanism. The female wheel of the epicyclic reduction is reversible: during normal operation it is kept on position by means of a electromagnetic clutch which hold the worm shaft connected to the epicyclic gearing. The coil of the electromagnetic clutch is normally fed by a direct current from separated external power source, or derived from motor power voltage, through a supply module. When the ESD condition occurs, the supply to the electromagnetic clutch is cut causing the disconnection of system which hold the worm shaft: in this conditions the epicyclic gearing become reversible causing the movement of the actuator on the fail condition by the effect of the spring. To avoid dangerous shock to the valve during the ESD action, an hydraulic damper is mounted on the spring system, whit an adjustable flow control orifice to be set to obtain the specified ESD times. Position of the valve is continuously monitored both in electric mode, both in fail-safe condition, by means of a position sensor directly connected the EFS output drive. After a Fail-Safe action, a local RESET is required, through the local control panel. Emergency Closing Operation In case of electric supply failure the electromagnetical lach opens and the actuator moves the valve in closing position by spring 4

6 Fail safe time regulation The closing time is adjustable by flow regulator 526 Local manual operation to open In case of loss of electric supply, switch valve 998 to manual mode and actuate hand pump 540 to open the actuator Local manual operation to close With valve 998 in manual position press the lever of hydraulic pushbutton 414, the actuator moves in closing by spring 1 Single acting spring return hydraulic actuator 30 Hydraulic accumulator (piston type/spring return) 352 Needle valve 356 Hydraulic filter 379 Check valve 395 Safety relief valve 414 2/2 N.C. hand-operated spring-return valve 526 Bidirectional flow regulator 527 Nozzle 528 Unidirectional flow regulator (adjustable setting) 540 Handpump 621 LP/HP pressure gauges 966 Terminals enclosure 998 2/2 N.C. hand-operated valve (auto/manual) 999 Electromagnetical latch 398 PST SOV (optional) Selector 998 is drawn in AUTO position Control Group Functions EFS2000 are equipped with an Hydraulic Control Group with two base functions: Adjustment of fail safe time Manual override function to operate the EFS when electrical power is not available. Adjustment of fail safe time is done trough the flow control valve (528). Manual override through the hand pump (540). Before to perform the local manual operation by hand-pump it is necessary to guarantee that the electromagnetic clutch is open: press the pushbutton OFF (Red mushroom) on the local control panel to be sure that clutch is really open. After the above operation, using a local two-positions (AUTO/MANUAL) hydraulic selector (998), select the local operation mode and successively through the hand pump manual operation can be carried out. At the end of manual operation, if the actuator is required to remain in the position opposite to the spring, it is necessary to leave the hydraulic selector in MANUAL position. To restore the electric mode function the hydraulic selector must be moved to AUTO position and, as soon the electrical power is available, the red mushroom pushbutton must be pressed to RESET the actuator. Select then LOCAL or REMOTE position, on the local control panel, according to the wanted type of operation. Legenda AUTO MANUAL 1 - Single acting spring return hydraulic actuator 30 - Hydraulic accumulator 39 - Selector position microswitch Needle valve Hydraulic filter Check valve Safety relief valve Hydraulic pushbutton Adjustable flow regulator Flow regulator Handpump Pressure gauce Terminals enclosure Auto/manual selector Electromagnetic latch 5

7 ...in cost reduction and user-friendliness The reduced number of mechanical parts ensures higher reliability and lower maintenance costs. The aluminium alloy highly resistant housing and covers, together with a lower number of joints, have increased EFS capacity to stand up to the most aggressive environments. A double-sealed enclosure assures protection from dust and humidity. The choice of internal components has increased the overall system efficiency (the motor is directly engaged to the gears) lowering the operational costs. Reduction of training costs is also one of the goals we have achieved through the user-friendliness of the system. No more codes to decipher: the EFS menu is clear and easy, and comes with all the following languages: Italian, English, Spanish, Portuguese, French,Turkish, Russian and Norwegian. Torque sensor The direct measure of the motor speed reports torque with high precision and a resolution of 1% of the nominal torque. Torque detection is based on motor torque vs. speed characteristics, voltage and temperature compensated. The torque vs. speed curve is memorised for each type of motors and in case of motor replacement simply a new configuration from the actuator local control panel is requested. Position sensor Low power consumption, long-life, absolute position sensor controlled by a dedicated microprocessor. Rotations in both senses are recognised and counted. If manually operated during power failure, the position is updated, stored and displayed locally. Electronic card: the latest technology The card is controlled by an high-performance microchip, with a slash memory. This allows high flexibility and the possibility to be re-programmed if necessary. The internal wiring is considerably reduced. The modular design of the electronic cards allows high flexibility for a great variety of combinations. All the electronic cards are treated with a tropicalisation protection in order to increase the performances even in the most severe enviromental conditions. 6

8 7

9 A dedicated software for PC and PDA is available for EFS With the new software, total control of EFS 2000 is always available in your hands and in your office. With a smart user-friendly graphic interface, all the actuator information, set-up, configuration data, diagnostic messages and data logger info are available for visualisation, analysis and reconfiguration from your PDA or PC. PDA Manager The PDA Manager will transform your common PDA or dedicated industrial PDA into a strong tool for the complete control, set-up and diagnostics of the EFS 2000 actuators installed in your plant. A user-friendly graphic interface reproduces the actuator local control panel for an easy control of the valve and offers several tools for a complete analysis of the actuator status. EFS 2000 supports Bluetooth TM non-intrusive communication with the possibility to communicate with the actuator within a distance of several meters from any angle. In addition, it is possible to connect to all the actuators within operation distance with one single PDA. 8

10 All the data exchanged with the actuator on-field can be shared with your PC in the office through the PC Manager Software. Connect the PDA to the PC with the ActiveSync program and download all the data. Standard PDA minimum basic requirements: Operating systems: Windows Mobile TM 2003 for Pocket PC; Bluetooth TM interface module; Processor: 266 MHz processor; Memory: 32 MB SDRAM minimum; 3.5" TFT display with 16k colour depth. Ex-hazardous area industrial PDA technical characteristics: - High performance industrial PDA based on Windows Mobile TM, with compact external dimensions, an integrated WLAN, USB and Bluetooth TM port. - Meets different industry requirements operating both inside and outside of Ex-hazardous areas. Basic features: Ergonomic design to facilitate operations without fatigue during continuous use; High resolution colour display, readable even in the most unfavourable light conditions; Protection from static electricicty, water and dust; Shockproof housing (non-corroding); Standard keyboard with navigation field and programmable keys; 3.5" TFT display with 16k colour depth. Technical data sheet: Operating systems: Windows Mobile TM 2003 Premium-Software for Pocket PC; Processor: 400 MHz processor based on Intel technology; Power supply: Rechargeable battery; Standard delivery: Unit, Charger, Operating instructions, safety instruction, software CD; Ex-Data: Ex-hazardous application intrinsically safe type and suitable for different gas and dust atmospheres, ATEX or other certification. 9

11 PC Manager PC Manager transforms your PC into a strong tool for the control, set-up and diagnostics of EFS 2000 actuators. A user-friendly graphic interface reproduces the actuator local control panel for an easy control of the valve and offers several tools for a complete analysis of the actuator status. EFS 2000 supports Bluetooth TM non-intrusive communication or serial communication (intrusive). The same interfaces available with PDA MANAGER with an improved graphic release (considering the larger screens available on PCs) are easily syncronisable with the PDA: - Actuator control: 10

12 - Actuator maintenance and diagnostic informations: - Actuator set-up: - Actuator data logger: PC Manager software supports Bluetooth TM, or serial communication (Windows 2000 and XP operating systems). 11

13 Standard ICON2000 multiturn electric actuator 12 Spring return mechanism

14 Local control and configuration panel Hydraulic control group for manual operation Electromagnetic clutch Epicyclic gear reduction with rack and pinion transmission 13

15 The base version is an intelligent actuator with hardwired (i.e. point-to-point) connection. High profile standards: all major features are included in the base version. Automatic phase correction The valve will be protected as the system automatically recognises and corrects phases preventing any unforeseen error in the rotation direction. Phase failure correction In case of loss of one phase, this features prevents the motor from overheating. The minimum time to set the alarm on is 100 ms, in order to prevent the system from being influenced by casual oscillations. In case of loss of one phase during motor running, the actuator will reach the end-of-travel position before setting the alarm condition and de-energising the actuator. Motor thermostat If during operation the temperature of the motor overrides the security limits, a thermostat will set the alarm condition and the command signal will be inhibited. Jammed valve protection If, after a command (close/open), the valve position does not change within a pre-set time, an alarm condition is set and the command signal will be inhibited. The pre-set time can be any time within an interval of 2 to 100 seconds. Anti-hammer protection This feature will protect both the motor and the valve. If a torque limit is reached it will prevent the valve from moving in the same direction which caused the torque limit. Instantaneous reversal protection When the actuator is operating in one direction and an immediate command for a reverse direction is set, unpredicted current surges arise with possible damages to the motor. To prevent such problems, a delay between the opposite commands can be programmed from 500 ms to 5 seconds. Warnings Warning signals become active when the operating conditions are close to a critical alarm level. Warning is displayed but operation is not interrupted. Remote controls Three different configurations are available: - 4 wires (OP, CL, Stop, C/latched) - 3 wires (OP, CL, C/push-to-run or latched with instant reverse) - 2 wires (NO contact to open or reverse) Control voltage - 24Vdc, internal supply - 20 to 125 Vdc, external supply - 20 to 120 Vac, external supply 14

16 15

17 Emergency Shutdown (ESD) When an ESD signal is received, the actuator performs the ESD programmed action, moving on the fail position under the action of the spring. The ESD action is performed by default when the ESD signal is sent. Other conditions for ESD can be configured through the local interface: - ESD in case of loss of main power; - ESD in case of Local Selector selected in OFF position - ESD by an emergency local pushbutton (mushroom type). Local RESET After an ESD action, normal operation can be restored after a Local RESET through the local pushbutton, or rather be automatically restored, depending on configuration. Analogic position retransmission Through 4-20mA with galvanic insulation Remote output contacts 7 voltage-free latching contacts and 1 change-over, voltage-free contact of relays are available for remote indication. They can all be configured as Normally Open or Normally Closed for one of the following conditions: - Fully open - Fully closed - Intermediate position - Position XX % - Position XX % - Actuator opening - Actuator closing - Motor running - Blinker - Local selected - Remote selected - Local stop active - PST active - Manual operation - Motor over temperature - Torque alarm - Torque alarm in opening - Torque alarm in closing - Jammed valve alarm - Jammed valve in opening - Jammed valve in closing - Mid-travel alarm - Warning - Low battery - EFS in manual mode - PST failed - EFS mid-travel alarm - MAINS (only for AS8) Interlock controls Two interlock inputs are available to inhibit actuator movement in open or close direction 16

18 Monitor relay When the actuator is not available for remote control, an alarm condition is set through a Monitor Relay with a change-over type, voltage free contact. The Monitor Relay is normally energized and will be de-energized under one of the following conditions: - loss of main power - speed sensor failure - loss of one phase - HW error - internal temperature alarm - mid-travel alarm - electrical contactors failure - configuration error - position sensor failure - EFS mid-travel alarm - EFS in manual mode The following other conditions can be individually configured to switch over the Monitor Relay: - motor over temperature - Manual operation selected - over torque - ESD action - jammed valve - Local STOP pushbutton pressed - LOCAL or OFF selected - Low battery Contactor failure As one of the vital parts of the actuators, contactors are continuously monitored. If a malfunction is detected an alarm is set and the command is inhibited. Maximum torque alarm During torque operation, if the current torque exceeds the relevant set value, the actuator command is inhibited and an alarm condition is set. Opto-coupled remote controls Actuator may be remotely controlled by 4, 3 or 2 wires, depending on the connection on the terminal board. Several options are available: latched, momentary, etc... Torque alarm by-pass During opening command, starting from open/closed position it is possible to set an interval from 0% to 20% of the total stroke where torque alarm is ignored. This will allow the actuator to win the Break-to-open torque. High/Low electronic temperature Through a semiconductor-based temperature sensor, the temperature in the electronic card is detected and an alarm condition is set on reaching the lowest/highest limits. 17

19 Local operator interface The local interface is designed for easy operation and to supply a complete and clear set of information. It is composed of - a padlockable three-position selector for LOCAL/OFF/REMOTE operation selection - two pushbuttons for local OPEN/CLOSE controls and menu navigation - one pushbutton for local stop - 2 customised displays, with backlight and heater: numeric 3 1 / 2 digit display for torque and position indication graphic display supporting various character sets 3 bi-coloured LED (green/red) to indicate fully open/closed/intermediate position 1 bicoloured LED (red/yellow) to indicate alarm/warning state. 1 blue LED to indicate Bluetooth connection active. Class 2 Bluetooth module available for wireless connection to PDA or PC. All buttons are recessed for protection from accidents or misuse. The local pushbuttons OPEN/CLOSE can be configured with 3 options: latched, latched + instant reverse, push-to-run. Through the local interface the field operator can enter a basic configuration menu which allows to set the following parameters: Base parameters - End of travel position in opening/closing - Opening/closing torque values - Position/torque display - Opening/closing by torque/position - Output contacts - PST function - Remote/Local control feature - ESD feature Extended parameters - Timer parameters - Position servo-amplifier parameters - Fieldbus interface parameters - Data logger - Maintenance date - Diagnostic info -. The configuration menu is password-protected. Added extra features Predictive maintenance Some of the most vital parts of the actuator are monitored: - contactor cycles count - torque trend - alarms data log Timer Function Module (TMR) It allows for partial or complete timer controlled valve stroke.through the local/remote interface the following can be set: - if it has to be active during opening or closing operation - ON time, from 2 to 200 sec max, with resolution of 1 sec. - OFF time, from 1 to 200 sec max, with resolution of 1 sec. - percentage of position when timer starts in opening - percentage of position when timer starts in closing Electronic card identification message Base, terminal board EFS card and 4-20mA card are clearly identified with a 64 character message for fast track including: - Biffi assembly code - Assembly serial number - Manufacturing date - Software and Hardware versions - Description 18

20 Data log ICON2000 is complete with an exhaustive data log system which will allow for storage of main events occurring during actuator operation. The recorded data are: Alarms: Last 64 alarms and date Last 64 warnings and date Torque curves: The EFS actuator keeps track of the most recently recorded 100 curves in opening and 100 curves in closing, storing data relevant to: date, time, temperatures, main voltage, travel time, torque sample (measured each 1% of position change). Operations: Opening time of the last stroke Closing time of last stroke Total contactor operations Motor run time Time out without electrical power Utilisation rate Recent contactor operations Recent motor run time Recent time without electrical power Recent utilisation rate Maintenance dates: Last maintenance date Next maintenance date Date of the last "clear recent data log" Start-up date PST data: Last PST report Next scheduled PST date PST initial signature (sec/pos) Last 100 PST profiles (sec/pos) EFS data: EFS status Clutch coil status Manual/Auto selector status EFS card temperature (C ) Mushroom pushbutton status EFS heater status Motor rating Motor duty Motor poles Motor type Motor current Test date Wiring diagram Enclosure Certificate Lubricant HW version SW version Torque set-up in opening Torque set-up in closing Valve data To identify the valve and its function in the process, the valve manufacturer/end user can enter the following data: Valve tag name Valve serial number Manufacturer Break opening torque Max stem thrust Flange type 28 characters are available for such information. Customisable torque profiles In some applications you need to set different torque profiles for operating the valve. For this reason we have introduced a 3-point torque profile. Local ESD function Local mushroom pushbutton Emergency and PST curves The EFS actuator keeps tracks of the most recently recorded 16 emergency curves and 16 PST curves and relevant signature (EFS and PST) Log-in recorder: The last 8 log-in data via Bluetooh TM, and PDA/PC are recorded Name plate The basic information about the actuator are electronically stored in a non-volatile memory: Serial number Actuator size Nominal torque Actuator speed Power supply 19

21 The following is a description of our EFS2000 standard features/options and working conditions. For whatever you may require which is not listed below, please contact Biffi Sales offices. Voltage ratings The actuator can accept the following voltage supplies: Three phase: 50 Hz 230, 240, 380, 400, 415, 440, 460, 480, 500, 690 V 60 Hz 208, 280, 380, 460, 480, 575 V Single phase 110, 115, 220, 240 V at 50, 60 Hz ESD signal voltage: from 24 to 230 Vac/Vdc ESD signal power: 40W in rush/24w maintained Tolerance on fluctuations Voltage: ±10% continuous +10% -15% intermittent Frequency: ±2% Working temperature The standard range is -30 C to +70 C Extended ranges -40 C to +70 C Special temperature range on request. Storage temperature From -55 C to +85 C Environmental protections Only waterproof IP 68 according to EN60529 (15 m dept/90 hours), or alternatively NEMA 4, NEMA 4X and NEMA 6 according to NEMA ICS6 Standard explosionproof degree Ex-d IIB T4 according to IEC / EN (-40 C/+70 C) IP 68 according to EN60529 (15 m dept/90 hours) Hazardous classification II 2 GD according to ATEX 94/9/EEC IP 68 according to EN60529 (15 m dept/90 hours) Safety Compliance Electromagnetic compatibility directive (EMC) EFS2000 actuators conform to the requirements of EMC Directive 2004/108/EC and further amendments. 20

22 Low voltage directive (LV) EFS2000 actuators conform with Low Voltage Directive 2006/95/EC and further amendments by the application of EN Machinery directive EFS2000 actuators comply with the provision of Machinery Directive 2006/42/EC. Functional Safety (IEC 61508).. Suitable for use in SIL 3 application; TUV certificate Test Summary Life test Standard ICON2000 life test is based on AWWA for a minimum of 10,000 cycles. Vibration test EFS2000 are certified as per IEC Appendix B (plant induced): frequencies from 1 to 500 Hz (in 3 axes) with 2.0g peak acceleration. Sweep cycles in each axis: 10. Seismic test EFS2000 are tested in accordance with IEC Frequencies from 1 to 35 Hz (in 3 axes) with max 2.0g peak acceleration. Verification of structural integrity at 5g. Endurance of oscillogram: 30 seconds. Motors Base version ICON2000 are equipped with three-phase asynchronous, squirrel cage, induction-type low-inertia balanced motors. For single phase or direct current supply, a special interface allows to use conventional asynchronous motors. The open frame is protected by an Explosionproof / Waterproof cover fixed on the actuator housing. Internal protection by a temperature sensor, inserted in the motor windings. The motor flange is directly coupled to the actuator housing with internal flying leads wired to an intermediate terminal board. Electric motors are supplied with insulation class for H as standard with dedicated speed and temperature sensor. 21

23 Manual override All actuators may be provided with an hydraulic control group for manual operation by means of a hand-pump in case of power failure. This control group is also necessary to adjust the fail-safe speed. Terminal block Terminal block is located in a double sealed enclosure. The terminal block is provided with the following terminations and accessories: - 3 terminals for power supply - 46 terminals for controls - 2 for DC external supply - 2 for low voltage (max 230V) external supply - 1 external earth - 1 external neutral Cable entries Three cable entries are supplied as standard. One extra entry is optionally available. The standard thread is NPT and diameter is: - one with 11/2" - two with 1" - one with 3/4" (optional) ISO Rc 7/1, ISO metric BS3643 and DIN 40430/PG and different diameters are available as options. Data logger Data logger is available for collecting different types of data useful in maintenance or diagnostic programs. Since the amount of collected data is quite large, the data logger must be downloaded onto a Pc/Pda through Irda or Bluetooth TM connection to be viewed. The main functions of the Data logger are: - RECORDER mode: measurement and memorisation of main voltage supply (V), motor temperature (C ), electronics compartment temperature (C ), with configurable sampling time and start date and time (up to 256 sets of measures can be memorised) - EVENT mode: memorisation of Open or Close commands, with indication of source, date and time. Configurable Start date and time. Up to 128 events can be memorised. - T-RECORDER mode: measurement and memorization of torque in opening (%), torque in closing (%), motor temperature (C ), electronic compartment temperature (C ) with configurable sampling time, start and time. The last 256 measures are continuously memorised. When a torque alarm arises the T-recorder stops. 22

24 23

25 A large variety of optional modules can be added to the base version. If the option you are looking for is not listed below, please contact Biffi. Fieldbus interfaces ICON2000 modular design is easily upgraded from base-to-base to bus versions. You just need to add the relevant plug-in card. ICON2000 flexible interface allows connection to the major field bus available on the market: Foundation Fieldbus Profibus DPV0, DPV1 and redundant DPV1 LonWorks Hart Modbus Please ask our Sales people for specific requirements. Position Servoamplifier Module (PSM) The module is necessary for actuators in modulating and inching duty. It drives the motor through pulses at constant frequency and duration proportional to the position error, following an externally set analogical point signal. The basic features are: Input: 4-20 ma or 0-20 ma with galvanic insulation Output: 4-20 ma with galvanic insulation for position or torque re-transmission. Three additional SPST output contacts to be configured "make or break". 2 interlock inputs. Position Analogue Retransmission Module (APTM) This card gives a 4-20 ma galvanically insulated module for position or torque retransmission. It is easily plugged in on the base card with no need for dedicated tools. Solid state power switch over temperature (only for heavy modulation duty version) It detects power card maximum temperature condition and sets the relevant alarm. Extended temperature ranges -40/+70 C by use of extended range components -55/+70 C by use of a heating source for internal electronic components, powered by external supply. 24

26 Partial stroke test (PST) Through a specific procedure a partial stroke test function can be carried out to check the functionality of the essential parts to achieve the EFS safety function while the valve/actuator is in line and in service. Anticondensate heater The internal modules provide enough power to grant anticondensation protection for general applications. But when the environment air humidity reaches critical levels, an additional heater (10 Watt Ohm, with external power supply) may be supplied on request. Battery Auxiliary batteries can be provided in an intrinsically safe enclosure. With auxiliary batteries it is possible to remotely transmit position also in case of power failure. 25

27 Spring to Open The information herein contained is reserved * property of Biffi and is subject to being modified without notice. Standard cable entries: a = 1 NPT b = 1 1/2 NPT 26 EFS2000 Series Overall Dimensions Model A a 1 a 2 B b 1 b 2 b 3 H Weight (Kg) EFS 10 OP EFS 20 OP EFS 40 OP EFS 80 OP EFS 160 OP EFS 320 OP EFS 480 OP EFS 960 OP

28 Spring to Close Standard cable entries: a = 1 NPT b = 1 1/2 NPT EFS2000 Series Overall Dimensions Model A a 1 a 2 B b 1 b 2 b 3 H Weight (Kg) EFS 10 CL EFS 20 CL EFS 40 CL EFS 80 CL EFS 160 CL EFS 320 CL EFS 480 CL EFS 960 CL

29 EFS2000 Series WGR Model ISO 5211 Ø d1 Ø d3 Ø d4 N Hmin h1 EFS10 EFS20 EFS40 EFS80 EFS160 EFS320 EFS480 EFS960 F10 F10 F14 F14 F16 F25 F25 F M10 M10 M16 M16 M20 M16 M16 M d7 Max Stem Acceptance Insert Bush Ø d Ø dx

30 Torque Curves Fail to Open diagram Fail to Close diagram Note: Please refer to the torque performance tables in the following pages. 29

31 EFS2000 v4-3ph version - Spring to Open data sheet EFS Model EFS 10OP/93-8 EFS 10OP/93-12 EFS 10OP/93-25 EFS 10OP/93-37 EFS 10OP/93-74 EFS 20OP/225-8 EFS 20OP/ EFS 20OP/ EFS 20OP/ EFS 20OP/ EFS 40OP/450-8 EFS 40OP/ EFS 40OP/ EFS 40OP/ EFS 40OP/ EFS 80OP/900-8 EFS 80OP/ EFS 80OP/ EFS 80OP/ EFS 80OP/ EFS 160OP/-8 EFS 160OP/-12 EFS 160OP/-25 EFS 160OP/-37 EFS 160OP/-74 EFS 320OP/-8 (2) EFS 320OP/-12 (2) EFS 320OP/-25 EFS 320OP/-37 EFS 320OP/-74 EFS 480OP/ EFS 480OP/ EFS 480OP/ EFS 480OP/ EFS 960OP/ (*) EFS 960OP/ (*) EFS 960OP/ (*) EFS 960OP/ (*) SET [Nm] SST [Nm] MST [Nm] MET [Nm] ET [Nm] MAX SET ACTUATOR OUTPUT TORQUE [Nm] (1) FST From 5 to 45 secs From 5 to 45 secs From 5 to 45 secs From 5 to 45 secs ICON Model IICON-010/25-8 ICON-010/25-12 ICON-010/25-25 ICON-010/25-37 ICON-010/25-74 ICON-010/50-8 ICON-010/50-12 ICON-010/50-25 ICON-010/50-37 ICON-010/50-74 ICON-010/60-8 ICON-010/60-12 ICON-010/60-25 ICON-010/60-37 ICON-010/60-74 ICON-010/110-8 ICON-010/ ICON-010/ ICON-010/ ICON-010/ ICON-010/110-8 ICON-010/ ICON-010/ ICON-010/ ICON-010/ ICON-020/210-8 ICON-020/ ICON-020/ ICON-020/ ICON-020/ ICON-020/ ICON-020/ ICON-020/ ICON-020/ ICON-030/ ICON-030/ ICON-030/ ICON-030/ Legenda SET Spring ending torque (Nm) at 90 (end to open) SST Spring starting torque (Nm) at 0 (start to open) MST Electric Mode starting torque (Nm) at 90 (start to close) MET Electric Mode ending torque (Nm) al 0 (end to close) ET Time for stroke (sec/90 ) with electric motor at 50Hz; multiply by 0,833 for 60Hz supply FST Fail safe adjustable time (sec/90 ) (*) For model EFS960 please contact BIFFI. (1) The Max Set Actuator Output torque is referred to the Open manoeuvre done with the electric motor 40% and the spring. FOR NO REASON, THE MOTOR SET TORQUE OF 40% IN THE OPENING DIRECTION HAS TO BE CHANGED. (2) Motor service limited to S2-10'. EFS performance table above is referred only to actuators ON/OFF service, up to 60 starts/hour, motor service S2-15'. 30

32 EFS2000 v4-3ph version - Spring to Close data sheet EFS Model EFS 10CL/93-8 EFS 10CL/93-12 EFS 10CL/93-25 EFS 10CL/93-37 EFS 10CL/93-74 EFS 20CL/225-8 EFS 20CL/ EFS 20CL/ EFS 20CL/ EFS 20CL/ EFS 40CL/450-8 EFS 40CL/ EFS 40CL/ EFS 40CL/ EFS 40CL/ EFS 80CL/900-8 EFS 80CL/ EFS 80CL/ EFS 80CL/ EFS 80CL/ EFS 160CL/-8 EFS 160CL/-12 EFS 160CL/-25 EFS 160CL/-37 EFS 160CL/-74 EFS 320CL/-8 EFS 320CL/-12 EFS 320CL/-25 EFS 320CL/-37 EFS 320CL/-74 EFS 480CL/ EFS 480CL/ EFS 480CL/ EFS 480CL/ EFS 960CL/ (*) EFS 960CL/ (*) EFS 960CL/ (*) EFS 960CL/ (*) SET [Nm] SST [Nm] MST [Nm] MET [Nm] ET [Nm] 45, ,31 10,2 5,1 45,92 30,61 15,31 10,2 5,1 91,84 61,22 30,61 20,41 10,2 91,84 61,22 30,61 20,41 10,2 145,71 97,14 72,86 48,57 24,29 229,59 153,06 76,53 51,02 25,51 114,8 76,53 51,02 25,51 202,04 101,02 67,35 33,67 MAX SET ACTUATOR OUTPUT TORQUE [Nm] (1) FST From 5 to 45 secs From 5 to 45 secs From 5 to 45 secs From 5 to 45 secs ICON Model IICON-010/25-8 ICON-010/25-12 ICON-010/25-25 ICON-010/25-37 ICON-010/25-74 ICON-010/50-8 ICON-010/50-12 ICON-010/50-25 ICON-010/50-37 ICON-010/50-74 ICON-010/60-8 ICON-010/60-12 ICON-010/60-25 ICON-010/60-37 ICON-010/60-74 ICON-010/110-8 ICON-010/ ICON-010/ ICON-010/ ICON-010/ ICON-010/110-8 ICON-010/ ICON-010/ ICON-010/ ICON-010/ ICON-020/210-8 ICON-020/ ICON-020/ ICON-020/ ICON-020/ ICON-020/ ICON-020/ ICON-020/ ICON-020/ ICON-030/ ICON-030/ ICON-030/ ICON-030/ Legenda SET Spring ending torque (Nm) at 0 (end to close) SST Spring starting torque (Nm) at 90 (start to close) MST Electric Mode starting torque (Nm) at 0 (start to open) MET Electric Mode ending torque (Nm) al 90 (end to open) ET Time for stroke (sec/90 ) with electric motor at 50Hz; multiply by 0,833 for 60Hz supply FST Fail safe adjustable time (sec/90 ) (*) For model EFS960 please contact BIFFI. (1) The Max Set Actuator Output torque is referred to the Close manoeuvre done with the electric motor 40% and the spring. FOR NO REASON, THE MOTOR SET TORQUE OF 40% IN THE CLOSING DIRECTION HAS TO BE CHANGED. (2) Motor service limited to S2-10'. EFS performance table above is referred only to actuators ON/OFF service, up to 60 starts/hour, motor service S2-15'. 31

33 General Configuration 32

34 NOTES 33

35 NOTES 34

36 For any further information you may require please contact Biffi Sales office; tel , fax , Norwegian distributor: Haakon Ellingsen AS Årenga 8, N-1340 Skui P.O. Box 184, N-1309 Rud Phone Fax post@ellingsen.biz Biffi reserves the right to modify contents without notice. 35

EFS EFS 2000 Electric failsafe actuators

EFS EFS 2000 Electric failsafe actuators EFS 2000 Electric failsafe actuators EFS 2000 Electric failsafe actuators A world of experience Biffi has been a leading manufacturer of valve actuators for more than 50 years. As one of the few manufacturers

More information

ICON 2000 series Electric actuators

ICON 2000 series Electric actuators ICON 2000 series electric actuators ICON 2000 Electric actuators A world of experience Biffi has been a leading manufacturer of valve actuators for more than 50 years. As one of the few manufacturers who

More information

The EFS 2000 v4 series are electric quarter turn spring return actuators for closing and opening a valve in emergency conditions.

The EFS 2000 v4 series are electric quarter turn spring return actuators for closing and opening a valve in emergency conditions. The EFS 2000 v4 series are electric quarter turn spring return actuators for closing and opening a valve in emergency conditions. Features General application The EFS 2000 is available in eight sizes and

More information

Features. Suitable for use in SIL 2 applications. Available in LP low power version with less than 1.65 A current consumption. General application

Features. Suitable for use in SIL 2 applications. Available in LP low power version with less than 1.65 A current consumption. General application The ICON 2000 v4 series are electronically-configurable quarter and multi-turn actuators with advanced operation, control, setting and maintenance characteristics Features General application The ICON

More information

BIFFI. Compact electric actuator for 90 operation, complete with the intelligent control unit ICON 2000 to fit small valves

BIFFI. Compact electric actuator for 90 operation, complete with the intelligent control unit ICON 2000 to fit small valves BIFFI Compact electric actuator for 90 operation, complete with the intelligent control unit ICON 2000 to fit small valves Mechanical features Light weight and compact design, mounting flange acc. ISO

More information

Haakon Ellingsen AS Årenga 8, N-1340 Skui P.O. Box 184, N-1309 Rud Phone Fax

Haakon Ellingsen AS Årenga 8, N-1340 Skui P.O. Box 184, N-1309 Rud Phone Fax NORWEGIAN DISTRIBUTOR: Ellingsen NOR INSTRUMENTS Haakon Ellingsen AS Årenga 8, N-1340 Skui P.O. Box 184, N-1309 Rud Phone + 47 67151200 Fax +47 67151201 post@ellingsen.biz www.ellingsen.biz F02-BU-E Rev.

More information

Intelligent, non-intrusive, multi-turn electric actuator

Intelligent, non-intrusive, multi-turn electric actuator Intelligent, non-intrusive, multi-turn electric actuator Features Easy set-up The set-up and commissioning is the most delicate part of the life of an actuator in a plant. A good set up will prevent most

More information

F01 Electric Actuators

F01 Electric Actuators Light weight, compact, intelligent electric quarter turn actuator with torques ranging from 150 to 600 Nm and speeds from 5 to 60 seconds FEATURES Constant torque controlled in both directions Cut metal

More information

ECU1000 ELECTRONIC CONTROL UNIT

ECU1000 ELECTRONIC CONTROL UNIT An advanced electronic system capable to be integrated in a SMART Electro Hydraulic System for heavy modulating, stepping, PST, diagnostic and ESD/BDV actions FEATURES GENERAL APPLICATION is a control

More information

Q Range Watertight Single-Phase Electric Quarter-turn Actuators for part-turn valves and dampers

Q Range Watertight Single-Phase Electric Quarter-turn Actuators for part-turn valves and dampers This brochure provides a comprehensive overview of the applications and associated functions available with Rotork Q actuators - comprising Q Standard and Q Pak actuators. The watertight Q Range actuators

More information

ELECTRO-HYDRAULIC ACTUATION SYSTEMS

ELECTRO-HYDRAULIC ACTUATION SYSTEMS ELECTRO-HYDRAULIC ACTUATION SYSTEMS ELECTRO HYDRAULIC ACTUATION SYSTEMS COMBINING TECHNOLOGIES OF ELECTRIC AND HYDRAULIC ACTUATORS Biffi Electro-Hydraulic actuators combine the simplicity and lower infrastructure

More information

Skilmatic SI 3 3 Electric Fail-Safe Actuators

Skilmatic SI 3 3 Electric Fail-Safe Actuators Introducing the 3 rd generation of Skilmatic SI self-contained electric fail-safe actuators. The SI range of self-contained electro-hydraulic actuators combining the simplicity of electrical operation

More information

The F02 series are compact, intelligent quarter-turn electric actuators for the accurate control of valves with torques from 35 to 2000 Nm /

The F02 series are compact, intelligent quarter-turn electric actuators for the accurate control of valves with torques from 35 to 2000 Nm / The F02 series are compact, intelligent quarter-turn electric actuators for the accurate control of valves with torques from 35 to 2000 Nm / 308 to 17,700 lb.in. Features General application The F02 is

More information

SECTION ELECTRIC MOTOR ACTUATORS FOR VALVES

SECTION ELECTRIC MOTOR ACTUATORS FOR VALVES SECTION 40 92 10 - ELECTRIC MOTOR ACTUATORS FOR VALVES PART 1 - GENERAL A. Description This section includes materials and installation of electric motor actuators for valves. B. Submittals 1. Submit shop

More information

308 to 17,700 lb.in. Ambient temperature Standard range: -25 C to +70 C / -13 F to 158 F Low temp range: -40 C to +70 C / -40 F to 158 F

308 to 17,700 lb.in. Ambient temperature Standard range: -25 C to +70 C / -13 F to 158 F Low temp range: -40 C to +70 C / -40 F to 158 F The EPI-2 series are compact, intelligent quarter-turn electric actuators for the accurate control of valves with torques from 35 to 2000 Nm / 308 to 17,700 lb.in. Features General application The EPI-2

More information

Keystone EPI-2 electric actuators

Keystone EPI-2 electric actuators The EPI-2 series are compact, intelligent quarter-turn electric actuators for the accurate control of valves with torques from 35 to 2000 Nm / 308 to 17,700 lb.in. Features General application The EPI-2

More information

Biffi Fail Safe Electric Actuators, model EFS2000v4 Instruction and Operating Manual

Biffi Fail Safe Electric Actuators, model EFS2000v4 Instruction and Operating Manual INDEX 1. General safety instructions... 1 2. Machine description... 3 3. Storage and pre-installation... 4 4. Assembling the actuator onto the valve... 5 5. Adjustment of angular stroke... 6 6. Installation...

More information

A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction.

A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. ELECTRIC The benefits of the ELA series could be summed up as follows: EASY SET-UP The initial key parameters set up are

More information

ACTUATION SOLUTIONS EXPERIENCE MORE

ACTUATION SOLUTIONS EXPERIENCE MORE ACTUATION SOLUTIONS EXPERIENCE MORE Maximize your plant s safety with the most advanced technology Overcome your most demanding automation challenges with our smart and reliable valve automation solutions

More information

ACTUATORS AND CONTROLS OVERVIEW

ACTUATORS AND CONTROLS OVERVIEW ACTUATORS AND CONTROLS OVERVIEW AUGUST 2015 PNEUMATIC ACTUATORS BIFFI Biffi-Morin Series B and C actuators are constructed of ductile iron housing and end caps, 17-4 stainless steel yoke, with either 316

More information

COMPACT ACTUATORS COMPACT PNEUMATIC & HYDRAULIC ACTUATORS

COMPACT ACTUATORS COMPACT PNEUMATIC & HYDRAULIC ACTUATORS COMPACT ACTUATORS COMPACT PNEUMATIC & HYDRAULIC ACTUATORS A WORLD OF EXPERIENCE Biffi is a leading manufacturer of valve automation solutions with 60 years experience and a global presence, offering a

More information

True Fail-Safe Technology and Precision Control for Reliable Shutdown

True Fail-Safe Technology and Precision Control for Reliable Shutdown True Fail-Safe Technology and Precision Control for Reliable Shutdown RTS Series Compact Fail-Safe Electric Actuators Reliable, Accurate, Compact Electric Actuation Technology for Critical Fail-Safe and

More information

We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document.

We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document. General information Actuator controls AC 01.2 for controlling multi-turn actuators of the SA/SAR type range and part-turn actuators of the SQ/SQR.2 type range. Features and functions Power supply Standard

More information

RS ACTUATO RS ACTUATO

RS ACTUATO RS ACTUATO ACTUATORS ACTUATORS flowconme ELECTRIC ACTUATORS Quarter - Turn / 90ᵒ Rotation High intelligence High protection Compact size Robust construction High integration Excellent performance Aluminium processed

More information

PRODUCTS AND CAPABILITIES ACTUATION & CONTROLS ACTUATION & CONTROLS PRODUCTS AND CAPABILITIES

PRODUCTS AND CAPABILITIES ACTUATION & CONTROLS ACTUATION & CONTROLS PRODUCTS AND CAPABILITIES PRODUCTS AND CAPABILITIES ACTUATION & CONTROLS ACTUATION & CONTROLS PRODUCTS AND CAPABILITIES Complete automation solutions for a broad range of industries. 2 ACTUATION & CONTROLS AUTOMATION SYSTEMS CONTROLS

More information

ATM SERIES THREE PHASE MULTI - TURN

ATM SERIES THREE PHASE MULTI - TURN ATM SERIES THREE PHASE MULTI - TURN Manual Operated Wheel Lifting Lugs for Easy Handling Comfort Size Clutch for Manul Operation High Torque Efficiency reversible motor Product Specification Watertight

More information

Innovation in actuation.

Innovation in actuation. Innovation in actuation. Keystone EPI-2 Quarter Turn Electric Actuators Control your low-torque quarter turn valves and dampers more effectively, even in the largest plants. A world of experience Keystone

More information

Dycon D1532SM. EN50131/PD6662 Grade 3, 12V 2A Power Supply. Technical Description Installation and Operating Manual DYCON POWER SOLUTIONS LTD

Dycon D1532SM. EN50131/PD6662 Grade 3, 12V 2A Power Supply. Technical Description Installation and Operating Manual DYCON POWER SOLUTIONS LTD Dycon D1532SM EN50131/PD6662 Grade 3, 12V 2A Power Supply Technical Description Installation and Operating Manual DYCON POWER SOLUTIONS LTD Tel: +44 (0)1443 471 900 Unit A Cwm Cynon Business Park Mountain

More information

Customized ELECTRO-HYDRAULIC CONTROL SYSTEM

Customized ELECTRO-HYDRAULIC CONTROL SYSTEM Customized ELECTRO-HYDRAULIC CONTROL SYSTEM ELECTRO-HYDRAULIC CONTROL SYSTEM 2 Since the founding of Automation Technology (ATI) more than 20 years ago, we have been recognized for innovation and dependability

More information

VALVCON ADC-SERIES ELECTRIC ACTUATOR WITH OPTIONAL BATTERY BACK-UP POWER

VALVCON ADC-SERIES ELECTRIC ACTUATOR WITH OPTIONAL BATTERY BACK-UP POWER VALVCON ADC-SERIES ELECTRIC ACTUATOR WITH OPTIONAL BATTERY BACK-UP POWER Metso is a leading designer and provider of Valvcon compact, reliable, electronically controlled electric actuators for valves and

More information

VALVITALIA VALVE OPERATORS

VALVITALIA VALVE OPERATORS A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. VALVITALIA VALVE OPERATORS 1 VALVITALIA AUTOMATION DIVISION PROFILE Valvitalia Automation Division manufactures all type

More information

Electronic Limit Switch Type

Electronic Limit Switch Type Electronic Limit Switch Type 3738-20 with optional solenoid valve for on/off rotary actuators Application Electronic limit switch for on/off applications to indicate the end position of rotary actuators.

More information

TQ Series represents our devoted technology over 30 years of experience in the valve actuation, offering customer the reliable, quality assured, and

TQ Series represents our devoted technology over 30 years of experience in the valve actuation, offering customer the reliable, quality assured, and 02 TQ Series represents our devoted technology over 30 years of experience in the valve actuation, offering customer the reliable, quality assured, and cost-effective product. Features Light, compact and

More information

Offshore and Onshore Applications Lucifer TM 2/2 and 3/2 ways 316L Stainless Steel solenoid valves

Offshore and Onshore Applications Lucifer TM 2/2 and 3/2 ways 316L Stainless Steel solenoid valves aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding courtesy of Statoil Offshore and Onshore Applications Lucifer TM 2/2

More information

Special voltages: Voltage >500 V AC are only permissible with external control box. 3-phase AC Voltages/frequencies. 1-phase AC Voltages/frequencies

Special voltages: Voltage >500 V AC are only permissible with external control box. 3-phase AC Voltages/frequencies. 1-phase AC Voltages/frequencies General information Actuator controls AC 01.2 for controlling multi-turn actuators of the SA/SAR type range and part-turn actuators of the SQ/SQR.2 type range. Power supply Standard voltages AC: 3-phase

More information

QUARTER-TURN ELECTRIC ACTUATORS

QUARTER-TURN ELECTRIC ACTUATORS QUARTER-TURN ELECTRIC ACTUATORS PRODUCT FEATURES & BENEFITS Sizes: QTE-1.5 / QTE-3.0 / QTE-6.0 Motor split-phase, capacitor driven; 25% Duty cycle 24/115/230VAC, 80% Duty Cycle 12/24 VDC Gearing hardened

More information

Q u a r t e r T u r n E l e c t r i c A c t u a t o r s

Q u a r t e r T u r n E l e c t r i c A c t u a t o r s Quarter Turn Electric Actuators A101/04 2 Q uarter-turn actuators are used to operate ball, plug or butterfly valves, dampers, vents and any equipment with quarter-turn or part turn travel. BERNARD has

More information

True Fail-Safe Technology and Precision Control Meet Emergency Shutdown and Demanding Process Applications

True Fail-Safe Technology and Precision Control Meet Emergency Shutdown and Demanding Process Applications True Fail-Safe Technology and Precision Control Meet Emergency Shutdown and Demanding Process Applications RTS Series Compact Fail-Safe Electric Actuators Reliable, Accurate, Compact Electric Actuation

More information

MORIN. Pneumatic and hydraulic actuators EXPERIENCE MORE

MORIN. Pneumatic and hydraulic actuators EXPERIENCE MORE MORIN Pneumatic and hydraulic actuators EXPERIENCE MORE Stainless steel quarter-turn actuators MORIN S Stainless steel spring-return and double-acting pneumatic quarter-turn actuators For remote control

More information

GIG/GIGS/GPO Gas Powered Actuators. GIG/GIGS/GPO gas powered actuators

GIG/GIGS/GPO Gas Powered Actuators. GIG/GIGS/GPO gas powered actuators GIG/GIGS/GPO Gas Powered Actuators GIG/GIGS/GPO gas powered actuators A world Of experience Biffi has been a leading manufacturer of valve actuators for more than 50 years. As one of the few manufacturers

More information

Type Electronic Limit Switch

Type Electronic Limit Switch Type 3738-20 Electronic Limit Switch With optional solenoid valve Application Electronic limit switch for on/off applications to indicate the end position. Optionally with integrated solenoid valve. Special

More information

LOW PRESSURE ACTUATORS. LOW PRESSURE PNEUMATIC actuators

LOW PRESSURE ACTUATORS. LOW PRESSURE PNEUMATIC actuators LOW PRESSURE ACTUATORS LOW PRESSURE PNEUMATIC actuators A WORLD OF EXPERIENCE Biffi is a leading manufacturer of valve automation solutions with 60 years experience and a global presence, offering a comprehensive

More information

COMPLETE LISTING OF OPTIONS. Toggles, Lights

COMPLETE LISTING OF OPTIONS. Toggles, Lights COMPLETE LISTING OF Toggles, Lights A001 A002 Local Auto/Manual Toggle Switch - NEMA 4. Switch for Auto (i.e. 4-20 ma from control room), or Manual (local control at actuator). Switch is maintain type.

More information

IQTF Range. Keeping the World Flowing. Electric full output turn actuators for choke and control valve applications

IQTF Range. Keeping the World Flowing. Electric full output turn actuators for choke and control valve applications The IQTF actuator, part of the 3 rd Generation IQ actuator range, is engineered for choke and control valve applications. The IQTF provides the reliability, accuracy and high resolution movement required

More information

Installation and Maintenance Instructions. World Leader in Modular Torque Limiters. PTM-4 Load Monitor

Installation and Maintenance Instructions. World Leader in Modular Torque Limiters. PTM-4 Load Monitor World Leader in Modular Torque Limiters Installation and Maintenance Instructions PTM-4 Load Monitor 1304 Twin Oaks Street Wichita Falls, Texas 76302 (940) 723-7800 Fax: (940) 723-7888 E-mail: sales@brunelcorp.com

More information

Automation is the techniques and equipment used to achieve automatic operation or control.

Automation is the techniques and equipment used to achieve automatic operation or control. VALVE AUTOMATION What is Automation? Automation is the techniques and equipment used to achieve automatic operation or control. Automation is an automatic operation and control of machinery or processes

More information

AT EVO SERIES BATTERY CHARGER

AT EVO SERIES BATTERY CHARGER STANDARD FEATURES 5 YEAR WARRANTY EVO AT Series Battery Charger is HindlePower s next generation SCR-based utility battery charger. This evolutionary product is revolutionary in its design and operation

More information

SYMBOL LEGEND DANGER WARNING NOTE THIS INDICATES DANGER TO THE LIFE AND HEALTH OF THE USER IS APPROPRIATE PRECAUTIONS ARE NOT TAKEN

SYMBOL LEGEND DANGER WARNING NOTE THIS INDICATES DANGER TO THE LIFE AND HEALTH OF THE USER IS APPROPRIATE PRECAUTIONS ARE NOT TAKEN SYMBOL LEGEND DANGER THIS INDICATES DANGER TO THE LIFE AND HEALTH OF THE USER IS APPROPRIATE PRECAUTIONS ARE NOT TAKEN WARNING THIS WARNS THAT MATERIALS MAY BE DAMAGED IF APPROPRIATE PRECAUTIONS ARE NOT

More information

ALGA/ALGAS SERIES PNEUMATIC ACTUATORS ALGA/ALGAS PNEUMATIC ACTUATORS

ALGA/ALGAS SERIES PNEUMATIC ACTUATORS ALGA/ALGAS PNEUMATIC ACTUATORS ALGA/ALGAS SERIES PNEUMATIC ACTUATORS ALGA/ALGAS PNEUMATIC ACTUATORS A WORLD OF EXPERIENCE Biffi has been a leading manufacturer of valve actuators for more than 50 years. As one of the few manufacturers

More information

1 potential-free change-over contact (max. 24 V DC/1 A) for SIL collective failure signal SIL functions - safety functions Standard: Safe ESD

1 potential-free change-over contact (max. 24 V DC/1 A) for SIL collective failure signal SIL functions - safety functions Standard: Safe ESD General information AC 01.2 Actuator controls in SIL version for controlling multi-turn actuators of the SA/SAR.2 type range and part-turn actuators of the SQ/SQR.2 type range. Information on SIL features

More information

ECONOMISER SERIES E2T USER MANUAL

ECONOMISER SERIES E2T USER MANUAL TURBO S.R.L. Electronic Control Systems for Dust Collectors e-mail: info@turbocontrols.it web: www.turbocontrols.it TEL. ++39 (0)362 574024 FAX ++39 (0)362 574092 ECONOMISER SERIES E2T USER MANUAL 24/06/2014

More information

LEDEEN SEF. Smart electric fail-safe actuator and control systems

LEDEEN SEF. Smart electric fail-safe actuator and control systems LEDEEN SEF Smart electric fail-safe actuator and control systems The Cameron portfolio of LEDEEN* actuators includes a new compact, modular, onboard hydraulic power unit (HPU). This new technology is operated

More information

Compact electric actuators for 90 operation of 1/4 turn valves providing a range of torque outputs up to 1645 Nm.

Compact electric actuators for 90 operation of 1/4 turn valves providing a range of torque outputs up to 1645 Nm. Compact electric actuators for 90 operation of 1/4 turn valves providing a range of torque outputs up to 1645 Nm. Features Gearcasing and enclosure is ESPC coated anodised aluminium, except Model 003 which

More information

MAQ Series Electric Actuator

MAQ Series Electric Actuator Series Electric Actuator Series INTRODUCTION KEYVALVE designs, produces and provides high quality actuators and services related to valve automation. - Our long years experience in automation field enables

More information

DIESEL Engine Fire Pump Controllers Features

DIESEL Engine Fire Pump Controllers Features 1-1 Printer / Recorder The industrial grade thermal printer is housed in a rugged steel enclosure within the controller. The on/off switch, feed and reset buttons are front accessible. A bi-color status

More information

Technical Specification. RCS Electric Actuators with a ProfiBus Field Control and Communication Module

Technical Specification. RCS Electric Actuators with a ProfiBus Field Control and Communication Module The following specification defines the minimum requirements for the supply of motor operated valve actuators with a field communication bus system for remote control. The complete system shall consist

More information

ATevo SERIES BATTERY CHARGER

ATevo SERIES BATTERY CHARGER PRODUCT OVERVIEW NEXT GENERATION NEW FEATURES: Interactive LCD display Intelligent self diagnostics NERC Compliant ATevo Battery Charger is the next generation SCR-based utility battery charger. The innovative

More information

Lexium integrated drives

Lexium integrated drives Description ILp for CANopen, PROFIBUS DP, RS ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for CANopen DS, PROFIBUS DP or RS and a brushless DC motor.

More information

Positioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories. Selection and Application

Positioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories. Selection and Application Positioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories Selection and Application Associated s T 8355 EN ff. Edition January 2010 Information Sheet T 8350 EN Positioners,

More information

Fortress 3 Harsh. Harsh Environment. Emergency Central Lighting Inverter (CLI) Technical Specifications

Fortress 3 Harsh. Harsh Environment. Emergency Central Lighting Inverter (CLI) Technical Specifications Fortress 3 Harsh Emergency Central Lighting Inverter (CLI) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. This specification describes a three phase, on-line, double conversion, solid state Lighting

More information

AT SERIES EVO BATTERY CHARGER

AT SERIES EVO BATTERY CHARGER AT SERIES EVO BATTERY CHARGER AT SERIES BATTERY CHARGER P R O D U C T hindlepowerinc.com 610-330-9000 AT Series evo. A battery charger designed with YOU in mind. AT Series evo is HindlePower s next generation

More information

V200 Positioner. V200 P Pneumatic Positioner. V200 E Electropneumatic Positioner. Housing Material: Cast aluminium with polyester coating

V200 Positioner. V200 P Pneumatic Positioner. V200 E Electropneumatic Positioner. Housing Material: Cast aluminium with polyester coating V200 Positioner Housing Material: Cast aluminium with polyester coating Indicator Options: Flat pointed indicator or raised indicator (red/green or yellow/black) One housing for pneumatic or electropneumatic

More information

MME/MOE Intelligent Electric Actuators About Ontrac

MME/MOE Intelligent Electric Actuators About Ontrac About Ontrac 01 Specifications Voltage supply Duty mode Motor control 3-phase AC, 380/460±10%, 50/60Hz±5%; 1-phase AC, 220±10%, 50/60Hz±5%; On-off (MOE series,) a complete stroke, S2-15 min; Modulating

More information

Redundant Control System

Redundant Control System Redundant Control System Safety instrumented system applications up to SIL 3 Process reliability Process valve diagnostics COMPLETE FUNCTIONAL SAFETY WITH ENHANCED RELIABILITY The Redundant Control System

More information

Fortress 1 Outdoor Emergency Central Lighting Inverter (CLI) Technical Specifications

Fortress 1 Outdoor Emergency Central Lighting Inverter (CLI) Technical Specifications Fortress 1 Outdoor Emergency Central Lighting Inverter (CLI) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. This specification describes a single phase, on-line, double conversion, solid state

More information

BAC Custom Engineered Controls

BAC Custom Engineered Controls BAC Custom Engineered Controls Product Detail Product Introduction......................................... K2 BAC Custom Engineered Controls Benefits....................................................

More information

Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT

Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT SERIES Features Full Port 16 Stainless Steel ball valve LED light gives continuous status indication IP67 weatherproof polyamide

More information

Electric Actuator EQ Series

Electric Actuator EQ Series Electric Actuator EQ Series Engineering Creative Solutions for Fluid Systems Since 1901 INTRODUCTION Pratt Industrial designs and provides high quality actuators and services related to valve automation.

More information

Mains. Great performances. Attractive coloured display. PLC functions inbuilt. Several I/O with possibility of expansion modules

Mains. Great performances. Attractive coloured display. PLC functions inbuilt. Several I/O with possibility of expansion modules Mains Powerful dual processor-based controller designed to manage production or emergency power plants composed by gensets working in parallel among them and/or with the mains. Available in two versions:

More information

Electric Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 inch NPT

Electric Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 inch NPT Electric Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 inch NPT SERIES Features Direct mount Full Port 316 Stainless Steel ball valve 3-piece swing out body designed for easy maintenance

More information

EIM CONTROLS HQ-SERIES QUARTER TURN ELECTRIC ACTUATORS

EIM CONTROLS HQ-SERIES QUARTER TURN ELECTRIC ACTUATORS EIM CONTROLS HQ-SERIES QUARTER TURN ELECTRIC ACTUATORS CONTENTS HQ Overview...3 Standard Configuration...4-5 Optional Features...6 Capacities & Ratings...7 Basic Outline Dimensions...8 Optional Control

More information

HGM1780 AUTOMATIC GENERATOR MODULE CONTENT 1. SUMMARY PERFORMANCE AND CHARACTERISTICS SPECIFICATION OPERATION...

HGM1780 AUTOMATIC GENERATOR MODULE CONTENT 1. SUMMARY PERFORMANCE AND CHARACTERISTICS SPECIFICATION OPERATION... CONTENT 1. SUMMARY...4 2. PERFORMANCE AND CHARACTERISTICS...4 3. SPECIFICATION...5 4. OPERATION...6 4.1. DISPLAY PANEL...6 4.2. LCD ICON INSTRUCTION...7 4.3. DISPLAY INSTRUCTIONS...7 4.4. DISPLAY DESCRIPTION...8

More information

Lexium integrated drives

Lexium integrated drives Description ILp for DeviceNet, EtherCAT, Modbus TCP, ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for DeviceNet, EtherCAT, Modbus TCP or and a brushless

More information

Paralleling Equipment

Paralleling Equipment Paralleling Equipment PowerCommand Model 300 Digital Master Control Description The PowerCommand TM Digital MasterControl is a microprocessor-based paralleling system component, designed to directly interface

More information

Quarter turn actuators Index

Quarter turn actuators Index Index General information page Introduction 227 Product information Pneumatic actuators page Double acting and spring return 228 page Index 231 ECON Compact 232 EL-series 234 ELQ-series 236 Hydraulic actuators

More information

HGM1770 Automatic Generator Control Module OPERATING MANUAL Smartgen Electronic

HGM1770 Automatic Generator Control Module OPERATING MANUAL Smartgen Electronic HGM1770 Automatic Generator Control Module OPERATING MANUAL Smartgen Electronic CONTENT 1. SUMMARY... 4 2. PERFORMANCE AND CHARACTERISTICS... 4 3. SPECIFICATIONS... 5 4. OPERATION... 6 5. PROTECTION...

More information

EVO AT SERIES BATTERY CHARGER

EVO AT SERIES BATTERY CHARGER EVO AT SERIES BATTERY CHARGER AT SERIES BATTERY CHARGER P R O D U C T PATENT PENDING hindlepowerinc.com 610-330-9000 Evo AT Series battery charger designed with YOU in mind. Evo AT Series battery charger

More information

Cobra 3 Stand-By Emergency Central Lighting Inverter (CLI) Technical Specifications

Cobra 3 Stand-By Emergency Central Lighting Inverter (CLI) Technical Specifications Cobra 3 Stand-By Emergency Central Lighting Inverter (CLI) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. This specification describes a stand-by, three-phase, solid state Lighting Inverter System

More information

EVO SERIES BATTERY CHARGER SERIES BATTERY CHARGER

EVO SERIES BATTERY CHARGER SERIES BATTERY CHARGER EVO SERIES BATTERY CHARGER SERIES BATTERY CHARGER Evo Series battery charger designed with YOU in mind. Evo Series battery charger is a next generation SCR-based utility battery charger. This evolutionary

More information

ELECTRIC MULTI-TURN ACTUATORS for valve automation in the oil & gas industry with high torque requirements

ELECTRIC MULTI-TURN ACTUATORS for valve automation in the oil & gas industry with high torque requirements ELECTRIC MULTI-TURN ACTUATORS for valve automation in the oil & gas industry with high torque requirements TECHNICAL DOCUMENTATION 2016 SAEx 25.1 SAEx 40.1 SAREx 25.1 SAREx 30.1 AMExC 01.1 ACExC 01.2 Manual

More information

Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT

Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT SERIES Features Full Port 16 Stainless Steel ball valve LED light gives continuous status indication IP67 weatherproof polyamide

More information

POWER+ PREMIUM CBS. BS-EN Emergency electrical installations Electric power systems Emergency lighting Escape lighting

POWER+ PREMIUM CBS. BS-EN Emergency electrical installations Electric power systems Emergency lighting Escape lighting POWER+ PREMIUM CBS CENTRALIZED Battery System BS-EN-50171 Emergency electrical installations Electric power systems Emergency lighting Escape lighting POWER+ PREMIUM CBS 10KVA-40KVA The systems running

More information

825-P Modular Protection System for motors Specification Guide

825-P Modular Protection System for motors Specification Guide Specification Guide 1.0 General 1.01 The motor protection relay shall have a current operating range of 0.5 and 5000 amperes. 1.02 The motor protection relay shall provide current measurement-based protection

More information

Double Acting and Spring Return Direct Gas Quarter-turn Actuators Output Torques to 6,500,000 lb.in.

Double Acting and Spring Return Direct Gas Quarter-turn Actuators Output Torques to 6,500,000 lb.in. Biffi GIG/GIGS Direct Gas Actuators Double Acting and Spring Return Direct Gas Quarter-turn Actuators Output Torques to 6,500,000 lb.in. Features and Benefits Separate gas and hydraulic cylinders prevent

More information

OFO & OFOS HYDRAULIC SUBSEA ACTUATORS

OFO & OFOS HYDRAULIC SUBSEA ACTUATORS HYDRAULIC SUBSEA ACTUATORS INDEX General description...p 1 Main materials...p 4 Application examples...p 8 Inspection and testing...p 10 Performance tables...p 11 Overall dimensions...p 12 Biffi reserves

More information

HGM1750 Genset Security Module USER MANUAL Smartgen Technology

HGM1750 Genset Security Module USER MANUAL Smartgen Technology HGM1750 Genset Security Module USER MANUAL Smartgen Technology CONTENT 1. SUMMARY... 4 2. PERFORMANCE AND CHARACTERISTICS... 5 3. SPECIFICATION... 7 4. OPERATION... 8 5. PROTECTION... 9 6. PARAMETER RANGE

More information

Installation and Operating Manual

Installation and Operating Manual . Installation and Operating Manual WE/XE-690, 1350, 1700, 2640, 4400, 5200, 6900, 10500 17500, 25690 1 (Rev. 020113) IOM8011.docx . Table of Contents Introduction Page Safety Instructions..... 3 Introduction

More information

Double Acting & Spring Return. SERIES 92/93 Rack & Pinion PNEUMATIC ACTUATOR. The High Performance Company

Double Acting & Spring Return. SERIES 92/93 Rack & Pinion PNEUMATIC ACTUATOR. The High Performance Company PNEUMATIC ACTUATOR SERIES 92/93 Rack & Pinion Double Acting & Spring Return The High Performance Company SERIES 92/93 Styling, strength, compactness, and simplicity of design have been combined to produce

More information

Radius, LLC Electric quarter turn actuator EW series Installation, Maintenance and Operating Manual

Radius, LLC Electric quarter turn actuator EW series Installation, Maintenance and Operating Manual Radius, LLC Electric quarter turn actuator EW series Installation, Maintenance and Operating Manual Models EW-880, 1400, 2100, 3100, 4400, 7000, 9700, 13000, 17000, 26500 EW-IMO-04 Radius, LLC 4922 Technical

More information

Dycon D2430 EN54-4 Fire Alarm Power Supply Series

Dycon D2430 EN54-4 Fire Alarm Power Supply Series Dycon D2430 EN54-4 Fire Alarm Power Supply Series Technical Description Installation and Operating Manual Construction Product Regulation 0359-CPR-00434 Page 1 of 14 Contents 1. General... 3 1.1 Product

More information

Linear Valve Electric Actuator

Linear Valve Electric Actuator Linear Valve Electric Actuator www.powervalves.nl Company Profile Company Profile Sun Yeh Electrical Ind. Co., Ltd. was founded in 1986. We always strive for technical excellence, innovation and the highest

More information

Power Lynx 3 Uninterruptible Power System (UPS) Technical Specifications

Power Lynx 3 Uninterruptible Power System (UPS) Technical Specifications Power Lynx 3 Uninterruptible Power System (UPS) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. This specification describes a three phase, on-line, double conversion, solid state Uninterruptible

More information

QUOTATION BLADE 7 LX. Product code GEAL6S2BAA

QUOTATION BLADE 7 LX. Product code GEAL6S2BAA 1 of 10 Mattei rotary vane compressors are the result of 90 years of investments in research and development to improve performance and lessen the impact on the environment. Designed for industrial continuous

More information

Electric Actuated Ball Valves 150 lb Flanged Stainless Steel, Full Port 1/2 to 4 inch Pipe Sizes

Electric Actuated Ball Valves 150 lb Flanged Stainless Steel, Full Port 1/2 to 4 inch Pipe Sizes Electric Actuated Ball Valves 150 lb Flanged Stainless Steel, Full Port 1/2 to 4 inch Pipe Sizes SERIES Features Direct mount Full Port 16 Stainless Steel ball valve 2-piece ANSI Class 150 flanged body

More information

Automation Selection Guide

Automation Selection Guide A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Automation Selection Guide Automator Products Pneumatic & Electric Actuators And Accessories PDF processed with CutePDF evaluation

More information

Burden Fuse Rating Resistor SAF / SAK6 1NM 10mm M8 12NM SAF / SAK10 2NM 16mm M8 12NM

Burden Fuse Rating Resistor SAF / SAK6 1NM 10mm M8 12NM SAF / SAK10 2NM 16mm M8 12NM Contents Section Page 1.0 Introduction 1 2.0 Specification 1-4 3.0 Installation 5-8 4.0 Programming 9-10 5.0 Menus 10-12 6.0 Fault Finding/Diagnostics 12-13 7.0 Communication 13 8.0 Setting Up 13-16 1.0

More information

4 Redundant Control System

4 Redundant Control System 4 Redundant Control System Introducing the all NEW RCS Configurator Safety Instrumented Systems Process Reliability Process Valve Diagnostics COMPLETE FUNCTIONAL SAFETY WITH ENHANCED RELIABILITY The Redundant

More information

VALVE CONTROLLERS Controllers for Dust Extr 2010 / 2011 action Technology

VALVE CONTROLLERS Controllers for Dust Extr 2010 / 2011 action Technology VALVE CONTROLLERS Controllers for Dust Extraction 2010 Technology / 2011 Valve controllers for all cases HESCH has the skills and technology to tackle any control task for dedusting of filter and dust

More information

AE Installation Operation & Maintenance Instructions

AE Installation Operation & Maintenance Instructions AE-1400 Installation Operation & Maintenance Instructions IMPORTANT Please read the installation operation and maintenance instruction prior to using any Jomar Valve component. Failure to follow the instructions

More information

MODEL 520 REMOTE START ENGINE MANAGEMENT SYSTEM

MODEL 520 REMOTE START ENGINE MANAGEMENT SYSTEM MODEL 520 REMOTE START ENGINE MANAGEMENT SYSTEM DSE 520 ISSUE 4 4/4/02 MR 1 TABLE OF CONTENTS Section Page INTRODUCTION... 4 CLARIFICATION OF NOTATION USED WITHIN THIS PUBLICATION.... 4 1. OPERATION...

More information