INNOZED D0 fuse-bases with touch protection

Transcription

1 INNOZED D0 fusebases with touch protection INNOZED D0 fusebases with touch protection FUSE HOLDERS, FUSE BASES AND SUPPORTS IEC D0 & D FUSE BASES FEATURES & BENEFITS INNOZED is a fuse base for D0 fuselinks, sizes D01 and D02. It is designed for a fast mounting on DIN rail in distribution boards and panels, for residential and industrial applications. INNOZED has an integrated touch protection cover, that prevents from electrocution in builtin status. The use of combtype busbars allows the positioning of the wires to be visually controlled. The use of wiring bus bars in the lower area of the terminal allows an easier insertion of the wires and visual control of the termination points at the same time. INNOZED allows a flexibility in the connection configuration. The fixing clamps consist of two separate compartments, that ensures a secure connection of two different wires. It is possible to use wires with different crosssections from 4mm² to 35mm² or two similar wires up to 16mm² cross section. TECHNICAL DATA OVERVIEW Voltage AC Voltage DC Amper (A) SCCR 400 VAC 250 VDC 63 A 50 ka (AC), 8 ka (DC) Mounting Installation on to DIN rails to EN Body Material plastic, silicon and halogen free Contact Materials Screws +/ (PZ2), galvanized, chromized (Chrome 3) Product Size Number of Poles D01,D02 1pole, 3pole Single pole and triple pole design Snap on fixing for DINrails 35mm Multi termination of 2 conductors (35mm² + 16mm²) or comb bus bar and cable possible Frame clamp mm² fine stranded for direct clamping or with wire end sleeve, M = Nm Space saving fuse base High safety during installation, operation and maintenance Extensive touch protection due to integrated cover Double function clamp up to 35mm² Large termination area and good termination conditions for outgoing feeders Installation in 45mm standard cut out Materials used are synthetic, free of silicon and halogen APPLICATIONS Distribution boards for residential use panel boards for industrial use STANDARDS IEC/EN VDE Fuse Holders, Fuse Bases and Supports / DSLADID0IN071116_EN EP.MERSEN.COM 1

2 INNOZED D0 fusebases with touch protection PRODUCT RANGE INNOZED D01 16 A, 400 V AC single pole E14 Design Weight kg 1 Package W both sides double function clamp mm² weight in kg per piece or set including package INNOZED D01 16 A, 400 V AC triple pole E14 Design Weight kg 1 Package X both sides double function clamp mm² weight in kg per piece or set including package INNOZED D02 63 A, 400 V AC single pole E18 Design Weight kg 1 Package Y both sides double function clamp mm² weight in kg per piece or set including package INNOZED D02 63 A, 400 V AC triple pole E18 Design Weight kg 1 Package Z both sides double function clamp mm² weight in kg per piece or set including package TECHNICAL DATA IN ACCORDANCE WITH EN / IEC INNOZED D01, 16A 1pole INNOZED D01, 16A 3pole INNOZED D02, 63A 1pole INNOZED D02, 63A 3pole Number of poles/phases Rated operational current I e 16 A 16 A 63 A 63 A Max. power dissipation of fuse links P n 2,5W 2,5W 5,5W 5,5W Rated operational voltage U e 400V AC, 250V DC 400V AC, 250V DC 400V AC, 250V DC 400V AC, 250V DC Rated short circuit making capacity with fuse links U e = AC 400 V; I e = 16 A U e = AC 400 V; I e = 63 A U e = DC 250 V; I e = 16 A U e = DC 250 V; I e = 63 A 50 ka 8 ka Rated impulse withstand voltage U imp 6 kv 6 kv 6 kv 6 kv Rated frequency 50 Hz 50 Hz 50 Hz 50 Hz Fire resistance UL 94 UL 94 UL 94 UL 94 Cable terminal connection Standard cable terminal frame clamp 1 535mm² 50 ka 8 ka frame clamp 1 535mm² 50 ka 8 ka frame clamp 1 535mm² 50 ka 8 ka frame clamp 1 535mm² Size D01 D01 D02 D02 Temperature resistance 120 C 120 C 120 C 120 C Track resistance/comperative tracking index CTI 200 CTI 200 CTI 200 CTI 200 Fuse Holders, Fuse Bases and Supports / DSLADID0IN071116_EN EP.MERSEN.COM 2

3 INNOZED D0 fusebases with touch protection DIMENSIONS INNOZED D0 fuse base with touch protection Dimensions in mm ACCESSORIES D0 screw caps 400V AC synthetic Description Weight Package E D01, E14, 16A, with testing hole 11.8 g P D02, E18, 63A, with testing hole 11.6 g R D01, E14, 16A, with sealing and testing hole 11.6 g S D02, E18, 63A, with sealing and testing hole 11.6 g L D02, E18, 63A, without testing hole 12 g M D02, E18, 63A, with adapter insert for fuse links size D g 20 D0 screw caps 400/440 VAC, 250 V DC porcelain, with removal grips Description Weight Package H D01, E14, 16A, with testing hole 16.4 g T D02, E18, 63A, with testing hole 18.5 g F D01, E14, 16A, with testing hole 16.4 g 20 Fuse Holders, Fuse Bases and Supports / DSLADID0IN071116_EN EP.MERSEN.COM 3

4 INNOZED D0 fusebases with touch protection ACCESSORIES D0 cartridge ring adapter inserts D01 E14 Description Weight Package J A, pink 0.4 g J A, brown 0.4 g P A, green 0.4 g M A, red 0.4 g D0 cartridge ring adapter inserts D02 E18 Description Application Weight Package S A, blue 0.5 g R A, yellow 0.6 g J A, black 0.5 g R A, white 0.7 g K A, pink For D01 fuse links in D02 fuse bases 0.5 g S A, brown For D01 fuse links in D02 fuse bases 0.6 g R A, green For D01 fuse links in D02 fuse bases 0.6 g H A, red For D01 fuse links in D02 fuse bases 0.6 g Q A, grey For D01 fuse links in D02 fuse bases 0.5 g 50 Fuse Holders, Fuse Bases and Supports / DSLADID0IN071116_EN EP.MERSEN.COM 4

5 INNOZED D0 fusebases with touch protection ACCESSORIES Wiring bars / Insulated bus bars Design Weight Package M single pole, 16 mm², peg design, Lshaped 171 g K J L E K G R triple pole, 16 mm², peg design, Lshaped single pole, 35 mm², peg design, Lshaped triple pole, 35 mm², peg design, Lshaped for single pole wiring bus bar endcover for triple pole wiring bus bar for triple pole wiring bus bars up to 16 mm² for triple pole wiring bus bars up to 35 mm² 638 g g g g g g g Fuse Holders, Fuse Bases and Supports / DSLADID0IN071116_EN EP.MERSEN.COM 5

6 LINOCUR LINOCUR IEC FUSE SWITCH DISCONNECTORS D0 FUSE COMBINATION UNITS The D0 Linocur is a combination of switch disconnector fuse and Neozed 63A fuselink, equiped with significant safety characeristics and sophisticated switching and terminal technology. The power dissipation of Neozed fuselinks leads to internal heating in the Linocur device. Special design measures have been implemented in the development of Linocur in order to prevent the device from overheating and avoid the unwanted, premature operation of the fuselink: generously sized, solid copper strip conductors highly sprung foot contact wide area of heat transfer through contact with the screw cap wide area of contact at the foot contact special contacts which share functions Thanks to this design, Linocur features one of the lowest power dissipation values on the market for D0 fusecombination units devices. FEATURES & BENEFITS Lowest Power Dissipation Remote fuse monitoring (optional) Highly userfriendly and safe changing of the fuse Bayonett design of the screw cap for quick changing of the fuse Easy installation (feeding from above and below) Double clamp connection for in/ output Modern design Modular system: 1 to 3+N poles, available with and without gauge piece APPLICATIONS Low voltage power distribution for: process industries commercial residential. STANDARDS EN/IEC DIN VDE DIN VDE 0660 Part 107 DIN VDE 0638 DIN VDE 0636 Part 3 IEC IEC Fuse Switch Disconnectors / DSLFDID02LIN100117_EN EP.MERSEN.COM 1

7 LINOCUR TECHNICAL DATA OVERVIEW 1 pole AC 230V Voltage 2, 3, 4 pole AC 400V marine application AC 440V per pole DC 65V Ampere Range (A) A Breaking capacity 50 ka Protection IP 20 AC 22B AC 400V 63A SCCR DC 22B DC 65V/pole AC 23B AC 400V 50A AC 23B AC 440V 35A Mounting DIN rail acc. EN Product Size D02 1, 2, 3polar Number of Poles 2polar (1+N) 4polar (3+N) Overvoltage category IV Rated frequency Hz Rated impulse withstand voltage U imp 6 kv Power dissipation 63A: phase=1.8w, neutral=1.4w IEC Fuse Switch Disconnectors / DSLFDID02LIN100117_EN EP.MERSEN.COM 2

8 LINOCUR PRODUCT RANGE D0 Linocur D to 400VAC, 65VDC Rated current In Number of poles/ phases Width Cross section Weight Package Z A 1 27 mm 35 mm² kg J A 2 54 mm 35 mm² 0.32 kg B A 3 81 mm 35 mm² 0.64 kg H A 1+N 54 mm 35 mm² 0.32 kg E A 3+N 108 mm 35 mm² 0.64 kg 1 D0 Linocur D02 220VDC Rated current In Number of poles/phases Width Cross section Weight Package L A mm 35 mm² 0.64 kg 1 D0 Linocur D02 230VAC to 400VAC, 65VDC, with fuselinks and fixed gauge pieces Rated current In Number of poles/ phases Width Cross section Weight Package M A 1 27 mm 35 mm² kg A A 1 27 mm 35 mm² kg B A 2 54 mm 35 mm² 0.32 kg G A 3 81 mm 35 mm² 0.64 kg N A 1 27 mm 35 mm² kg D A 2 54 mm 35 mm² 0.32 kg E A 3 81 mm 35 mm² 0.64 kg C A 1 27 mm 35 mm² kg D A 2 54 mm 35 mm² 0.32 kg P A 3 81 mm 35 mm² 0.64 kg 1 D0 Linocur D02 250VAC to 440 VAC (suitable for marine application) Rated current In Number of poles/ phases Width Cross section Weight Package H A 1 27 mm 35 mm² kg S A 2 54 mm 35 mm² 0.32 kg J A 3 81 mm 35 mm² 0.64 kg T A 3+N 108 mm 35 mm² kg 1 IEC Fuse Switch Disconnectors / DSLFDID02LIN100117_EN EP.MERSEN.COM 3

9 LINOCUR DIMENSIONS Dimensions in mm ACCESSORIES D0 screw caps 400V AC synthetic W K Locking devices J Description Design Weight Package Description Design L Reduction Spring, for the use of D01 fuselinks in the bayonet screw cap Size D01 Replacement srew cap with sealing hole, without testing hole D02, 63A Special key for locking caps 1 g 10 Replacement srew cap with sealing hole, without testing hole D02, 63A Rated current In Weight 32.9 g 1 Locking cap for D0 Linocur, with industrial locking wrench 63A 12.5 g A 6 g 10 Package IEC Fuse Switch Disconnectors / DSLFDID02LIN100117_EN EP.MERSEN.COM 4

10 LINOCUR ACCESSORIES Wiring bars / Insulated bus bars Design Weight Package M single pole, 16 mm², peg design, Lshaped 171 g K L E G R Z A B C D triple pole, 16 mm², peg design, Lshaped triple pole, 35 mm², peg design, Lshaped for single pole wiring bus bar for triple pole wiring bus bars up to 16 mm² for triple pole wiring bus bars up to 35 mm² Eurovario wiring rail fixed length and may not be cut length 159mm, cross section 10mm² Eurovario wiring rail fixed length and may not be cut length 159mm, cross section 16mm² Eurovario wiring rail fixed length and may not be cut length 243mm, cross section 10mm² Eurovario wiring rail fixed length and may not be cut length 243mm, cross section 16mm² special wiring bar to connect Linocur (27mm) with miniature circuit breakers (18mm) length 140mm, cross section 16mm² 638 g g g g g g g g g g Indication facilities G H J Terminal clamps V Design Weight Package Monitoring device for Linocur 2P, 3P, 3P+N Type 1 (switch position), cross section 1,5mm², operating voltage 400V +/10% Monitoring device for Linocur 2P, 3P, 3P+N Type 2 (fuse operation), cross section 1,5mm², operating voltage 400V +/10% Monitoring device for Linocur 2P, 3P, 3P+N Type 3 (switch position and fuse operation), cross section 1,5mm², operating voltage 400V +/10% Design Weight Package Connecting terminal 50mm², insulated, long, cross section 50mm² (if 35mm² rail is used then infeed terminal required) kg kg kg g 10 IEC Fuse Switch Disconnectors / DSLFDID02LIN100117_EN EP.MERSEN.COM 5