fuse holders & bases
|
|
- Brenda French
- 6 years ago
- Views:
Transcription
1 PMF Modular fuse holders for industrial cylindrical fuse links. For mounting on DIN/EN rail. Single phase models, single-phase+neutral in only one module and multi-pole types. Available with fusing indicator or with microswitch for use with fuse links with striker (only fusing detection or fusing+pre-breaking+fuse link detection). Multi-pole units can be made of connection accessories. PMF fuse holders are made of self-extinguishable materials and have silver plated copper contacts. UL and CSA approvals. PMX New modular fuse holder for 14x51 & 22x58 cylindrical fuses. 1 Available in a extended range of different versions with fuse indicator, with microswitch, 69V, 24 V DC, Microswitch FUSING+PRE-BREAKING+FUSE LINK DETECTION. 2 Accessory available to lock the fuse holder by a padlock. 3 IP2 Security accessory in Terminal zones. For wires of section 1 mm 2. 4 All the versions with label holder for a good circuit identification. 5 Compact design. 6 Accessories for Multiple poles assembly for fuse holders and Microswitch. 7 Ventilation zones optimized for a better heat dissipation. 8 2 position DIN Rail fi xation. 9 Made of a polymer high performance with a fusion temperature more than 3 C. This provides a safety margin against a possible overheating of the fuse, and when it exceeds the rated power acceptance of the fuse holder. 1 The PMX fuse holder can be fi xed/ unfi xed on DIN rail with the same screwing tools that the installer uses for cable terminal fi xing, regardless the screw driver head is in form of slot or PZ2. 11 PMX Fuse holder is made of halogen free plastic, prepared for future restrictions on these substances. All these features make the new PMX Fuse holder one of the most complete product in the market. PMC COMPACT Compact fuse holders for industrial cylindrical fuse links. Very low dimensions. For mounting on DIN/EN rail. Single phase models or single phase + neutral in only one module. Multi-pole units can be made with connection accessories. PMC fuse holders are made with self-extinguishable materials and have silver plated copper contacts. CC CLASS Modular fuse holders for cylindrical CC class fuse links. For mounting on DIN/EN rail. Single phase and multi-pole types. Available with fusing indicator Multi-pole units can be made with connection accessories. CC class fuse holders are made with self-extinguishable materials and have silver plated copper contacts. UL and CSA approvals SC SCREW FIXING FUSE HOLDERS Fuse holders for industrial cylindrical fuse links. Screw fixing.available single-pole and neutrals. SC fuse holders are made with self-extinguishable materials and have silver plated copper contacts BAC FUSE HOLDERS Open bases for cylindrical fuses. The bases BAC for cylindrical fuses are particularly suitable for semiconductor fuses with high power dissipation and therefore needed to be mounted on open bases to facilitate the heat dissipation. Fixation on panel by screw. Made of thermosetting self extinguishing material. TECHNICAL DATA
2
3 PMF PMF PMF POLES MODULES REFERENCE In U PACKING 17,5 mm WITHOUT INDICATOR WITH INDICATOR (A) (V) Uni./BOX 8x32 I I /192 N N /192 I + N I /192 I + N I / I / I / N I / N I / I / x38 I I /192 N N /192 I + N I /192 I + N I / I / I / N I / N I / I / I 14x51 I 1, I /9 N 1,5 485 N /9 I + N I / I /45 3 4, I /3 3 + N I / I /2 485 I 22x58 I * 69 6/36 N N 125* 69 6/36 I + N * 69 3/ * 69 3/ * 69 2/ N * 69 1/ * 69 1/6 (*) 125A intermitent use (1A continuous use) IEC IEC EN EN IEC EN TECHNICAL DATA 99 PMF FUSE HOLDERS ASSEMBLY USE OF RAPIDPLUS FUSES IN MODULAR FUSE HOLDERS 177
4 PMF 24VDC PMF WITH MICROSWITCH PMF ACCESSORIES PMF PMF 24VDC WITH INDICATOR 1x38 POLES REFERENCE In U PACKING (A) (V) I I II I III I I PMF WITH MICROSWITCH POLES REFERENCE DESCRIPTION In U PACKING (A) (V) Uni./BOX 14x51 I 489 PREBREAKING - FUSING - PRESENCE / PREBREAKING - FUSING - PRESENCE /3 3 + N 4892 PREBREAKING - FUSING - PRESENCE / M ONLY FUSING / M ONLY FUSING /3 3 + N 4845 M ONLY FUSING / x58 I 489 PREBREAKING - FUSING - PRESENCE 125* 69 6/ PREBREAKING - FUSING - PRESENCE 125* 69 2/ N 4892 PREBREAKING - FUSING - PRESENCE 125* 69 1/6 (*) 125A intermitent use (1A continuous use) PMF ACCESSORIES SIZE REFERENCE DESCRIPTION PACKING 8x32-1x38-14x PINS FOR MULTIPOLE ASSEMBLY 12 8x32-1x HANDLE TIES FOR MULTIPOLE ASSEMBLY 12 14x HANDLE TIES FOR MULTIPOLE ASSEMBLY 12 14x51 UNIPOLAR 488 MICROSWITCH/ONLY FUSING 5 14x51 TRIPOLAR 489 MICROSWITCH/ONLY FUSING
5 PMF 1VDC new PMF PMF 1VDC FOR PHOTOVOLTAIC APPLICATIONS POLES MODULES REFERENCE DESCRIPTION In U PACKING (A) (V DC) Uni./BOX 1x38 I I SINGLE-POLE / MULTI-POLE / I I I SINGLE-POLE / I MULTI-POLE / I 94 IEC IEC EN EN IEC EN
6 PMX PMX WITH MICROSWITCH PMX ACCESSORIES new PMX14 PMX 14 POLES MODULES REFERENCE In U PACKING WITHOUT INDICATOR WITH INDICATOR (A) (V) Uni./BOX 14x51 I /36 N /36 I + N / / / N / /6 14x51 24VDC /36 1+N / / PMX 14 WITH MICROSWITCH POLES MODULES REFERENCE In U PACKING PREBREAKING FUSING - PRESENCE ONLY FUSION (A) (V) Uni./BOX 14x51 I /36 I + N / / /12 3+N / / PMX 14 ACCESSORIES 14x51 REFERENCE DESCRIPTION PACKING 485 PIN FOR MULTIPOLE ASSEMBLY HANDLE TIES FOR MULTIPOLE ASSEMBLY HANDLE TIES FOR MICROSWITCH ASSEMBLY LOCK SUPPORT MICROSWITCH 1P * MICROSWITCH 3P * MICROSWITCH 3P (2M) * MICROSWITCH UNIPOLAR EXTENSION MICROSWITCH TRIPOLAR EXTENSION REPLACEMENT FUSING INDICATOR NEON 12/69 VAC REPLACEMENT FUSING INDICATOR LED 24 VDC SPECIAL PROTECTION IP2 ACCESSORIE PMX (*) To convert standard base on microswitch base only FUSING and as microswitch PMX spare PREBREAKING- FUSING-PRESENCE IEC IEC EN EN IEC EN TECHNICAL DATA 98 PMX FUSE HOLDERS ASSEMBLY MICROSWITCH MOUNTING IDENTIFICATION BY LABEL 1,15 13 USE OF RAPIDPLUS FUSES IN MODULAR FUSE HOLDERS
7 PMX PMX WITH MICROSWITCH PMX ACCESSORIES new PMX22 PMX 22 POLES MODULES REFERENCE In U PACKING WITHOUT INDICATOR WITH INDICATOR (A) (V) Uni./BOX 22x58 I /36 N /36 I + N / / / N / /6 22x58 24VDC /36 1+N / / PMX 22 WITH MICROSWITCH POLES MODULES REFERENCE In U PACKING PREBREAKING FUSING - PRESENCE ONLY FUSION (A) (V) Uni./BOX 22x58 I /36 I + N / / /12 3+N / / PMX 22 ACCESSORIES 22x58 REFERENCE DESCRIPTION PACKING 485 PIN FOR MULTIPOLE ASSEMBLY HANDLE TIES FOR MULTIPOLE ASSEMBLY HANDLE TIES FOR MICROSWITCH ASSEMBLY LOCK SUPPORT MICROSWITCH 1P * MICROSWITCH 3P * MICROSWITCH 3P (2M) * MICROSWITCH UNIPOLAR EXTENSION MICROSWITCH TRIPOLAR EXTENSION REPLACEMENT FUSING INDICATOR NEON 12/69 VAC REPLACEMENT FUSING INDICATOR LED 24 VDC SPECIAL PROTECTION IP2 ACCESSORIE PMX (*) To convert standard base on microswitch base only FUSING and as microswitch PMX spare PREBREAKING- FUSING-PRESENCE 96 IEC IEC EN EN IEC EN TECHNICAL DATA 98 PMX FUSE HOLDERS ASSEMBLY MICROSWITCH MOUNTING IDENTIFICATION BY LABEL 1,15 13 USE OF RAPIDPLUS FUSES IN MODULAR FUSE HOLDERS 177
8 PMC CC CLASS PMC-CC CLASS PMC COMPACT 8x32 POLES MODULES REFERENCE In U PACKING 17,5 mm (A) (V) Uni./BOX I /336 N /336 I + N /336 I + N / / / N / N / /84 1x38 I /336 N /336 I + N /336 I + N / / / N / N / /84 PMC ACCESSORIES SIZE REFERENCE DESCRIPTION PACKING x31-1x PINS FOR MULTIPOLE ASSEMBLY 12 8x31-1x HANDLE TIES FOR MULTIPOLE ASSEMBLY 12 CC CLASS POLES REFERENCE In U PACKING WITHOUT INDICATOR WITH INDICATOR (A) (V) Uni./BOX I I /192 II I 3 6 6/96 III I 3 6 4/ IEC IEC EN EN IEC EN TECHNICAL DATA 99 PMC FUSE HOLDERS ASSEMBLY 1 14 USE OF RAPIDPLUS FUSES IN MODULAR FUSE HOLDERS
9 INDUSTRIAL FUSE HOLDERS SC BAC SC-BAC SC SCREW FIXING FUSE HOLDERS POLES MODULES REFERENCE In U PACKING 17,5 mm (A) (V) 8x32 I N N x38 14x51 22x58 I N N I N N I N N BAC FUSE HOLDERS 1x38 REFERENCE In U PACKING (A) (V) Uni./BOX new /3 14x /24 22x /12 98 IEC IEC EN EN IEC EN BAC FUSE HOLDERS 12 SC FUSE HOLDERS 14
10 TECHNICAL DATA PMF - PMX - PMC - CC CLASS PMF-PMX PMC-CC CLASS CYLINDRICAL PMF 8x31 PMF 1x38 CC CLASS PMF 14x51 PMF 22x58 PMC 8x31 PMC 1x38 PMX-14 PMX-22 RATED CURRENT (A) RATED VOLTAGE (V) RATED POWER DISSIPATION 3 W 3 W 3 W 5 W 9,5 W 3 W 3 W 5 W 9,5 W UTILIZATION CATEGORY AC-22B 4V AC-22B 5V AC-21B 69 V AC-22B 5V AC-21B 69 V AC-22B 5V AC-21B 69 V AC-21B 69 V AC-2 AC-2 AC-22B 5V AC-21B 69 V AC-22B 5V AC-21B 69 V PROTECTION DEGREE IP-2 IP-2 IP-2 IP-2 IP-2 IP-2 IP-2 IP-2 IP-2 OPERATING TEMPERATURE C C C C C C C C C STORAGE TEMPERATURE C C C C C C C C C 2 C DERATING TEMPERATURE 3 C,95,95,95,95,95,95,95,95,95 4 C,9,9,9,9,9,9,9,9,9 5 C,8,8,8,8,8,8,8,8, DERATING Nº OF POLES 5-6,8,8,8,8,8,8,8,8,8 7-9,7,7,7,7,7,7,7,7,7 > 1,6,6,6,6,6,6,6,6,6 FIXING RAIL DIN / EN SCREW MAX. CONNECTING WIRE 1 x 16 mm 2 STRANDED 1 x 25 mm 2 SOLID 1 x 1 mm 2 STRANDED (1P+N 1M) 1 x 16 mm 2 SOLID (1P+N 1M) 1 x 16 mm 2 STRANDED 1 x 25 mm 2 SOLID 1 x 25 mm 2 STRANDED 1 x 35 mm 2 SOLID 1 x 1 mm2 1 x 5 mm 2 STRANDED 1 x 16 mm 2 SOLID 1 x 1 mm 2 STRANDED 1 x 16 mm 2 SOLID 1 x 25 mm 2 STRANDED 1 x 35 mm 2 SOLID 1 x 25 mm 2 STRANDED 1 x 35 mm 2 SOLID WITH LIGHTNING INDICATOR 12/4V AC 12/69V AC 24V DC 12/69V AC 24V DC 23/69V AC 23/69V AC 23/69V AC 24/6 VDC 23/69V AC 24/6 VDC 2,5 Nm MAX. TIGHTENING TORQUE 2 Nm (1P+N 1M) 2,5 Nm 2 Nm (1P+N 1M) 2,5 Nm 3 Nm 4 Nm 2 Nm 2 Nm 3 Nm 4 Nm WITH MICROSWITCH 5A-25V FUSING PREBREAKING PRESENCE FUSING MULTIPOLAR UNION WITH ACCESSORIES technical data LABEL HOLDER LOCKING ACCESSORIES
11 PMF - CC CLASS - PMX FUSE HOLDERS ASSEMBLY PMC FUSE HOLDERS ASSEMBLY PMF-PMX PMC-CC CLASS PMF-CC CLASS-PMX FUSE HOLDERS ASSEMBLY PMF(8x32-1x38-14x51), CC CLASS & PMX FUSE HOLDERS MULTI-POLE ASSEMBLY ASSEMBLY PIN HANDLE TIE PMC FUSE HOLDERS ASSEMBLY PMC FUSE HOLDERS MULTI-POLE ASSEMBLY For multipole assemblies of fuse holders are necessary several accessories. Examples: A bipolar PMF or PMC fuse holder: 2 assembly pins and 1 handle tie. A three-pole PMF or PMC fuse holder: 4 assembly pins and 2 handle tie. technical ASSEMBLY data PIN 1 IEC IEC EN EN IEC EN
12 PMF-CC CLASS FUSE HOLDERS PMF-CC CLASS PMF(8x32-1x38) & CC CLASS FUSE HOLDERS +,5 +1, +1,5 +2, PMF 14x51 FUSE HOLDERS +3, +2,25 +1,5 +,75 11
13 PMF FUSE HOLDERS PMF-BAC PMF 22x58 FUSE HOLDERS +1, +2, +3, +4, BAC FUSE HOLDERS new SIZE A B C ØF 1x x x IEC IEC EN EN IEC EN
14 PMX FUSE HOLDERS new PMX PMF 14x51 FUSE HOLDERS +3, +,75 +1,5 +2,25 PMF 22x58 FUSE HOLDERS +1, +4, +2, +3, 13
15 PMC-SC FUSE HOLDERS PMC-SC PMC FUSE HOLDERS +2, +,5 +1, +1,5 SC FUSE HOLDERS SIZE A B C D E F G H 8,5x x x x IEC IEC EN EN IEC EN
16 PMX FUSE HOLDERS MICROSWITCH MOUNTING IDENTIFICATION BY LABEL LOCKING MEANS A PADLOCK PMX MICROSWITCH MOUNTING Put on the microswitch on the guides, and push in horizontal movement to the final position. * For ONLY FUSION accessory, first mount the lifter in his place. IDENTIFICATION BY LABEL Open the label-holder part when the fuse holder is totally closed or totally open, put on the label and close. LOCKING MEANS A PADLOCK To avoid the operation and connection when the fuse holder is open, put on the accessory Padlock support sliding it for the guides, and covering the fuse link zone. (Is possible the use with or without fuse link) Introduce the fuse link trough the simmetriocal holes and close it. 15
fuse holders CYLINDRICAL1
fuse holders CYLINDRICAL1 2 6 PMF MODULAR 7 MODULAR 9 PMC COMPACT 9 PMCC COMPACT 1 SC SCREW FIXING 1 BAC OPEN 11 PMP PANEL MOUNTING 11 PMB SOCKET PMF MODULAR Modular fuse holders for industrial cylindrical
More informationCYLINDRICAL. fuse holders
fuse holders CYLINDRICAL 04 07 PMC MODULAR FUSE COMPACT HOLDERS 07 -CC FOR CC CLASS FUSE-LINKS 08 PMF 09 SC SCREW FIXING 10 PMB PLUG CONNECTION 10 CLIP CONTACT FOR φ10 FUSE-LINKS 09 BAC OPEN FUSE BASES
More informationfuses fuse holders CYLINDRICAL
fuses fuse holders 02 gg FUSES 04 am FUSES FUSES 09 PMC COMPACT 09 -CC FOR CC CLASS FUSE-LINKS 11 PMB PLUG CONNECTION 11 CLIP CONTACT FOR φ10 FUSE-LINKS 10 PMF 11 BAC OPEN FUSE BASES 06 gg FUSES FUSES
More informationFUSE-LINKS FOR PHOTOVOLTAIC APPLICATIONS
1 2 06 PML 10/14x85 1500V FUSE HOLDERS 08 CLIP CONTACT FOR φ10 FUSE LINKS 05 PMX & 14x51 FUSE HOLDERS 02 gpv & 14x51 600 &/1100 FUSE LINKS 03 gpv 1200 & 1500V FUSE LINKS 04 gpv NH1, NH2 & NH3 FUSE LINKS
More informationnew NH fuse-links (HRC) rated rated breaking type current voltage capacity size description price
NH fuse-links (HRC) rated rated breaking type current voltage capacity size description price gg fuselinks 500V (IEC60269 - VDE0636 - DIN43620) with fuse blown indication NH Fuse links gg class with high
More informationCYLINDRICAL FUSES. 8x32. 10x38. 14x51. In REFERENCE U BREAKING CAPACITY REFERENCE U BREAKING CAPACITY PACKING (A) IEC /95/EC
fuses 02 gg 04 am gg Cylindrical fuse links gg class for use as general protection against overloads and short circuits, intended as protection of cables, power lines and equipment. Made of ceramic tube
More informationFUSE BASES NH FUSE BASES 690V 160A 160A
fuse bases NH NH 14 690V NH 16 ACCESSORIES FOR NH 18 CR 690V NH 20 SECTIONABLE NEUTRAL NH BASES 21 BS FUSE SWITCH DISCONNECTORS 690V NH NH Fuse bases for NH fuse links. For mounting on DIN/EN rail or
More informationINDUSTRIAL CYLINDRICAL FUSE LINKS
gg Cylindrical gg class for use as general protection against overloads and short circuits, intended as protection of cables, power lines and equipment. Made of ceramic tube with high withstand to internal
More informationCYLINDRICAL FUSES CYLINDRICAL FUSES
fuses 1 2 02 04 Cylindrical fuse links class for use as general protection against overloads and short circuits, intended as protection of cables, power lines and equipment. Made of ceramic tube with high
More informationRAPIDPLUS. high speed fuse links for semiconductors
high speed fuse links for semiconductors RAPIDPLUS 2 PAGE04 ar PAGE05 gr PAGE06 gs NH ar RAPIDPLUS ar fuse links are intended to clearing short-circuits and have been designed and manufactured to have
More informationfuse-links & fuse holders PHOTOVOLTAIC
fuse-links & fuse holders 04 gpv FOR APPLICATIONS 04 gpv FOR APPLICATIONS 05 gpv & FOR APPLICATIONS 06 PMF FUSE HOLDERS FOR APPLICATIONS 07 ST & FUSE BASES FOR APPLICATIONS FUSE HOLDERS & BASES gpv 10x38
More informationRAPIDPLUS. high speed fuse links for semiconductors
high speed fuse links for semiconductors RAPIDPLUS 2 PAGE04 ar HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS PAGE05 gr HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS PAGE06 gs NH HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS
More informationUltraSafe US22 Modular fuse-holders
UltraSafe US22 FUSE HOLDERS, FUSE BASES AND SUPPORTS UL/CSA FUSE HOLDERS FEATURES & BENEFITS The innovative and comprehensive UltraSafe range of Mersen fuse-holders. are finger-safe under IEC standards
More informationModulostar US10 Modular fuse-holders
Modulostar US10 FUSE HOLDERS, FUSE BASES AND SUPPORTS UL/CSA FUSE HOLDERS FEATURES & BENEFITS The innovative and comprehensive Modulostar range of Mersen fuse-holders. are finger-safe under IEC standards
More informationModulostar CMS10 Modular fuse-holders
Modulostar CMS10 FUSE HOLDERS, FUSE BASES AND SUPPORTS IEC CYLINDRICAL FUSE HOLDERS FEATURES & BENEFITS The innovative and comprehensive Modulostar range of Mersen fuse-holders. are finger-safe under IEC
More informationCylindrical fuse-link
Cylindrical fuse-link Technical data Rated voltage Rated current Rated frequency Rated breaking capacity Characteristics ody material 00 V AC, 00 V AC, 90 V AC CH 8 - A/00 V CH 0,- A/00 V, 0-3 A/00 V CH
More informationPage 12-2 Page Page Page DC FUSES FOR PHOTOVOLTAIC APPLICATIONS 10x38mm, IEC class gpv Rated current: 20A Rated voltage: 1000VDC.
Page -2 Page -2 AC FUSE HOLDERS Version without indicator: 1P, 1P+N, 2P, 3P, 3P+N Version with indicator: 1P For fuses x38, 14x51 and 22x58mm IEC class gg or am. IEC rated current: 32A, 50A, 0A IEC rated
More informationFuse holders and fuses
Modular size for 10x38, 14x51 and 22x58mm fuses Finger safe - IEC IP20 degree of protection against accidental contact with live parts and with sealable cover for operators safety Version with status indicator
More informationIEC CYLINDRICAL FUSE SYSTEM
IEC CYLINDRICAL FUSE SYSTEM European Domestic and Industrial Fuse Links The Bussmann range of European cylindrical fuse links are available in a broad selection of physical sizes and current ratings for
More informationPowerLine OS Switch Fuses A, 690V
Technical Brochure PowerLine OS Switch Fuses 20...160 A, 690V Brochure OS 10 GB 99-04 9902CD04 ABB Control New Switch Fuse Range 2 3 Total user safety Total user safety Fuse carriers fully IP20 protected
More informationCylindrical fuse-link
ylindrical fuse-link Technical data Rated voltage Rated current Rated frequency Rated breaking capacity haracteristics Body material 00 V A, 500 V A, 90 V A H 8-5 A/00 V H 0,5- A/500 V, 0-3 A/00 V H -5
More informationFuse disconnectors for cylindrical fuse-links
Advantages of fuse disconnector PF + N in one module Double connection clamps New method of mounting on the DIN rail and simple replacement LED indicator version Extraction of entire fuse-link when changing
More informationLoad break switches. Load break switches for all your applications... Why choose a load break switch designed for photovoltaic applications?...
Load break switches Load break switches for all your applications.................................... Why choose a load break switch designed for photovoltaic applications?............. Load break switch
More informationNEW EFD fuse disconnector
NEW EFD fuse disconnector More space for finger to open fuse carrier Advantages of cylindrical fuse disconnector EFD ompliance with IE 60947-1, IE 60947-3, UL 4248-1, UL 4248-4, UL 4248-8, UL 486E and
More informationNon-Fused Load Break Switches FSSC, SX, SXDC, SC
UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty switches are designed with the most up-todate disconnect
More informationINNOZED D0 fuse-bases with touch protection
INNOZED D0 fusebases with touch protection INNOZED D0 fusebases with touch protection FUSE HOLDERS, FUSE BASES AND SUPPORTS IEC D0 & D FUSE BASES FEATURES & BENEFITS INNOZED is a fuse base for D0 fuselinks,
More informationNon-fusable disconnect switches standards UL and CSA from 16 to 100 A
Non-fusible disconnect switches sircm_132_a sircm_133_a The solution for > Industrial control systems Rotary switch SIRCO M 3 x 80 A Toggle switch SIRCO M 3 x 80 A + 2 auxiliary contacts Competitive advantages
More informationE 90 range of fuse disconnectors and fuseholders Uncompromising performance
E 90 range of fuse disconnectors and fuseholders Uncompromising performance Designing simplicity ABB competence serving the most demanding customers Suitability for disconnection and switching, effective
More informationPANEL PANEL MOUNTING COMPONENTS
PANEL PANEL MOUNTING COMPONENTS For conventional wiring, Wöhner offers a comprehensive range of panel components for fastening to a DIN rail or mounting plate. The fuses and associated connection technology
More informationNH HRC Fuses. IEC & British Standard Fuses NHG B
NH HRC Fuses NHG B Specifications Class: gg/ g L Description: DIN square bodied, dual indication industrial fuses. Construction: Steatite insulator, corrosionproof (aluminum) metal parts with full-contact,
More informationTX³ RCCBs 2P up to 100 A
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 TX³ RCCBs CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
More informationFUSERBLOC Fuse combination switches with rear connection for industrial fuses up to 400 A
Fuse protection fuser_737_a_1_cat.eps fuser_738_a_1_cat.eps The solution for > Motor load break > Protection of industrial processes FUSERBLOC REAR / FRONT connections 3 x 250 A fuser_739_a_1_cat.eps Strong
More informationDX³ RCCBs - ID 4P up to 100 A
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX³ s - ID CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
More information, , PREPARATION - CONNECTION. Mounting:. On symmetrical EN rail or DIN 35 rail
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX 3 4500 A / 6 ka CONTENTS PAGES 1. Description, use...1 2. Range...1 3. Overall dimensions...1 4. Preparation - Connection...1
More informationUSCC & USM UltraSafe TM Fuseholders
USCC & USM UltraSafe TM Fuseholders UltraSafe modular fuseholders for midget and class CC fuses Mersen UltraSafe Modular Fuseholders introduce a new level of safety for Class CC (USCC) and Midget 1-1/2
More informationNon-Fused Load Break Switches FSSC, SX, SXDC, SC
Non-Fused Load Break Switches FSSC, SX, SXDC, SC UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty
More informationNon-Fused Load Break Switches FSSC, SX, SXDC, SC
Non-Fused Load Break Switches FSSC, SX, SXDC, SC UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty
More informationSIRCO MV PV Load break switches for photovoltaic applications for use up to 1000 VDC from 63 to 80 A
Load break switches SIRCO MV PV sircm-pv_010_a_1_cat The solution for > Residential buildings > Buildings > Solar parks Strong points SIRCO MV PV 1000 V - 80 A direct operation > Modular device > Patented
More informationTMC 91H is now TMC 60 C Series
TMC 91H is now TMC 60 C Series The new Thermal Magnetic Circuit Breaker is once again available and better than ever! The new version is not only UL recognized with the same electrical performance as the
More informationIEC Low Voltage General Purpose Protection
, 6A, 0/400VAC (/440VAC) Complying with DIN VDE 0660 Part 07 EN / IEC 60947- DIN VDE 066 Part IEC 6069- DIN VDE 068 DIN VDE 4880 The D0-LINOCUR is a combination of switch-disconnector-fuse and NEOZED 6
More informationFUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
Fuse protection fuser_548_a cat The solution for > Motor load break. > Protection of industrial cabinet. FUSERBLOC 6 to 25 A Strong points fuser_52_a cat Function FUSERBLOC 2 to 4 A FUSERBLOC are manually
More informationRX 3 MCB 4500 A Phase + Neutral, neutral on left side
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 RX 3 MCB 4500 A CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
More informationINNOZED D0 fuse-bases with touch protection
D0 fusebases with touch protection D0 fusebases with touch protection FUSE HOLDERS, FUSE BASES AND SUPPORTS IEC D0 & D FUSE BASES FEATURES & BENEFITS is a fuse base for D0 fuselinks, sizes D0 and D02.
More informationFUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
fuser_548_a_1_cat fuser_532_a_1_cat fuser_539_a_1_cat FUSERBLOC from 25 to 32 A FUSERBLOC from 630 to 1250 A FUSERBLOC from 32 to 400 A Function FUSERBLOC are manually operated multipolar fuse combination
More informationFUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
Fuse protection fuser_548_a_1_cat The solution for > Motor load break > Protection of industrial processes FUSERBLOC 63 to 125 A Strong points fuser_532_a_1_cat Function FUSERBLOC 32 to 4 A FUSERBLOC are
More informationSENTRON SIVACON ALPHA
SENTRON SIVACON ALPHA Low-Voltage Power Distribution and Electrical Installation Technology Catalog Extract LV 10 Edition 10/2018 siemens.com/lowvoltage Related catalogs Low-Voltage Power Distribution
More informationFuseology. Fuse Holders, Fuse Blocks, Power Distribution Blocks & Surge Suppression. Optima Fuse Holders & Overcurrent Protection Modules.
Fuseology Fuse Holders, Fuse Blocks, Power Distribution Blocks & Surge Suppression Optima Fuse Holders & Overcurrent Protection Modules Compact, full-featured modules that deliver Type 2 coordinated protection,
More informationPhase + Neutral, neutral on left side
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 DX 3 MCB 10000 A / 16 ka CONTENTS PAGE 1. Description, use...1 2. Range...1 3. Overall dimensions...1 4. Preparation - Connection...1
More informationPANEL-MOUNTING COMPONENTS FUSE HOLDERS. Quality
PANEL-MOUNTING COMPONENTS FUSE HOLDERS Quality For conventional wiring, Wöhner offers a comprehensive range of panel components for fastening to a DIN rail or mounting plate. The fuses and associated
More informationR.C.B.O. SP / 1 module
87045 LIMOGES Cedex - France Telephone : (+33) 5 55 06 87 87 Fax : (+33) 5 55 06 88 88 R.C.B.O. SP / 1 module 6064 04 6064 64 05 6064 10 6064 11 6064 12 CONTENTS PAGES 1. Description, use... 1 2. Range...
More informationPhase + Neutral, neutral on right side
87045 LIMOGES Cedex Telephone number: +33 5 55 06 87 87 Fax: +33 5 55 06 88 88 DX 3 MCB 6000 A / 10 ka Cat.. N (s): 4 074 67 / 68 / 69 / 70 / 71 / 72 / 73 / 74 / 75 / 76 / 77 / 78 / 79 ; 4 077 33 / 34
More informationfootprint of traditional fusible switches
Disconnect switches Contents Section page Description Compact Circuit Protector (CCP) disconnect switches Class CC, UL supplemental and IEC 0x38mm (CCP) -3 Class CF CUBEFuse (CCP-CF) 4-5 Compact Circuit
More informationIEC Low Voltage Products Module 4
IEC Low Voltage Products Module 4 IEC Low Voltage Products NH DIN o All variations o Features benefits o Dual indication IEC Cylindrical Fuse System o Wide range of sizes and ratings o CCP NEW Product!
More informationContents. Volume 5 Motor Control and Protection CA E December
Rotary Disconnects.2 R5 Series Non-Fusible 16 80A Product Description R5 Series (UL 508 listed) products are manually operated modular switches. Load break switching and isolation provide safety solutions
More informationMULTIBLOC 3.ST8 Size 3, 630A, 690VAC, Design for Bottom Fitting, 3-,4-pole
MULTIBLOC 3.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 3.ST8 comprises NH fuse switch disconnectors for 630A. They are designed for bottom
More informationBussmann series modular fuse holders brochure. Compact modular fuse holders Products for Industrial, PV, IEC and UL applications
Bussmann series modular fuse holders brochure Compact modular fuse holders Products for Industrial, PV, IEC and UL applications Eaton is the leading source of fusible circuit protection solutions in the
More informationMicroswitches M series
Microswitches M series Technical data Housing Made of glass-reinforced polymer, self-extinguishing, shock-proof thermoplastic resin. Protection degree: IP40 (with protection art. VF C0) IP0 (with protection
More informationBETA Switching Switches and Light Indicators
Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET
More information(1,5 modules per pole)
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 DX 3 MCB 36kA, 80A CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
More informationup to 63 A (1 module per pole)
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 Direct current MCB DX 3 16kA, up to 63 A (1 module per pole) CONTENTS PAGE 1. Description - Use... 1 2. Range... 1 3. Overall dimensions...
More informationNH Plastic bases. NH Plastic bases IEC NH FUSE BASES FEATURES & BENEFITS APPLICATIONS STANDARDS TECHNICAL DATA OVERVIEW
FUSE HOLDERS, FUSE BASES AND SUPPORTS IEC NH FUSE BASES FEATURES & BENEFITS Polyester insulating bases Silver-plated contacts High-pressure spring contacts Screw or rail mounting Multipolar bases available
More informationLINOCUR Size D02 63A 230VAC/440VAC
IEC FUSE SWITCH DISCONNECTORS D0 FUSE COMBINATION UNITS The D0 Linocur is a combination of switch disconnector fuse and Neozed 63A fuse-link, equiped with significant safety characeristics and sophisticated
More informationMULTIBLOC 1.RST8 Size 1, 250A, 690VAC, Design for bus bar installation, Triple Pole
MULTIBLOC 1.RST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC 1.RST8 comprises NH fuse switch disconnectors for 250A. Products are designed in triple
More informationHorizontal fuse disconnects
THE NAME FOR SAFETY Horizontal fuse disconnects Horizontal fuse disconnects Horizontal fuse Disconnects are used in building installations, switchgear and controlgear as well as in power utility networks.
More informationStandard terminal blocks
T01005 001229 Standard terminal blocks DIN 1 - Spacing 6 mm + 0,05 (.28") M 4/6... Standard blocks Blue Orange Yellow Green ed Black White Brown Beige V0 Blue V0 M 4/6 0115 116.07 M 4/6.N 0125 116.01 M
More informationRX 3 M.C.B A up to 63 A
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 RX 3 M.C.B. 6000 A up to 63 A Cat. N (s): 4 197 49 to 4 199 23 CONTENTS PAGES 1. Description, use... 1 2. Range... 1 3. Overall dimensions...
More informationProtistor size 14x51 ar 690VAC (IEC) / 700VAC (UL)
690VAC (IEC) / VAC (UL) Protistor size 14x51 ar 690VAC (IEC) / VAC (UL) SEMICONDUCTOR PROTECTION FUSES IEC HIGH-SPEED CYLINDRICAL FUSE-LINKS AC PROTECTION FEATURES & BENEFITS Low l²t for improved semiconductor
More informationDNX 3 MCB 4500 A / 6 ka Phase + Neutral, neutral on left side
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DNX 3 MCB 4500 A / 6 ka CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation
More informationSIRCO M UL 508 Non-fusible disconnect switches standards UL and CSA from 16 to 100 A
Non-fusible disconnect switches SRCO M UL 58 sircm_132_a sircm_133_a The solution for > ndustrial control systems Rotary switch SRCO M 3 x 8 A Toggle switch SRCO M 3 x 8 A + 2 auxiliary contacts Strong
More informationSurge-Trap Pluggable STPT2 Series - 40kA
Surge-Trap Pluggable STPT2 Series - 40kA SURGE PROTECTION FOR POWER LINES DIN-RAIL IEC TYPE 2 / CLASS II FEATURES & BENEFITS Maximum discharge current (8/20μs): 40kA per phase Nominal discharge current
More informationEQUIPMENT FOR CONNECTION OF A PHOTOVOLTAIC INSTALLATION (UP TO 5 KW)
Catalogue photovoltaic installations 2005 EQUIPMENT FOR CONNECTION OF A PHOTOVOLTAIC INSTALLATION (UP TO 5 KW) "POSSIBILITY OF ASSEMBLY FOR BIDIRECTIONAL ELECTRONIC MONOPHASE METER FOR ALL VERSIONS". MODULAR
More informationLoad Break Disconnect Switches FSLBS
Load Break Disconnect Switches FSLBS UL 508 Non-Fused Load Break Switches The FSLBS Load Break Switch is a newly designed industrial-grade switch capable of making or breaking loads up to 600V. It is suitable
More informationSCREW-TYPE DISTRIBUTION BLOCKS
SCREW-TYPE DISTRIBUTION BLOCKS PRODUCT INFORMATION CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power in a compact space
More informationfor NH industrial and high-speed (ur) fuses from 160 to 2500 A
for NH industrial and high-speed (ur) fuses from 60 to 00 socle_066_b cat socle_046_b cat The solution for > Motor feeders > Protection of industrial cabinet Function ase Size ase IPX SOOME fuse bases
More informationComplete and reliable solar circuit protection
Contents Photovoltaic fuses, holders, and blocks 6 Complete and reliable solar circuit protection Description Fuses Fuse size Volts Amps PVM 13/32" x 1-1/2" 600 4-30 PVS-R RK5 600 20-400 Section page PV-_A10_
More informationINNOVATION IS OUR POWER.
MANUAL 2019 EN INNOVATION IS OUR POWER. Wöhner develops system solutions for the electro-technical market. For over 90 years, the Wöhner name has been synonymous with impressive technical achievements
More informationNA1FC7T. Fuse holder terminal blocks
NAFC7T 00 Fuse holder terminal blocks T0077 009 Fuse holder terminal blocks for 5 x 0 mm and 5 x 5 mm fuses DIN - DIN Spacing 8 mm (.5") M /8.SF... Spacing 8 mm (.5") M /8.SFT Standard 8 mm block. M /8.SF
More informationFUSOMAT Visible breaking and tripping fuse switches from 250 to 1250 A
Fuse protection The solution for > Motor load break > Protection of industrial cabinet > Electrical distribution fusom_063_b_1_cat Strong points > Tripping upon overload > High breaking capacity > Improved
More informationBtdin RCD Add-on modules 125A for MCBs 1,5 modules per pole
Index Pages 1. Descripton... 2 2. Product range... 2 3. Overall dimensions... 2 4. Fixing Connection... 3 5. Generl characteristics... 4 6. Compliance - Approvals... 6 7. Curves... 7 8. Auxiliares and
More informationMULTIBLOC 1.ST8 Size 1, 250A, 690VAC, Design for Bottom Fitting, 1-,2-,3-,4-pole
MULTIBLOC 1.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 1.ST8 comprises NH fuse switch disconnectors for 250A. They are designed for bottom
More informationNH LOW VOLTAGE a FUSE SYSTEM
NH LOW VOLTAGE a FUSE SYSTEM NH DIN Low Voltage Fuse System from Cooper Bussmann High Breaking Capacity 400Vac, 500Vac and 690Vac Insulated Tag variants available Dual Indication VDE 066 Part 1 DIN 4 60
More informationSCREW-TYPE DISTRIBUTION BLOCKS
CONTA-CONNECT SCREW-TYPE DISTRIBUTION BLOCKS Our ideas Your advantages CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power
More informationCompact Circuit Protector (CCP)
UL Class CC, Midget and IEC 10x38 fuses The revolutionary Cooper Bussmann CCP is 1/3 the footprint of a molded case circuit breaker. The level of protection provided by the CCP is up to three times the
More informationSolid State Relays, 3-phase
PMA Prozeß- und Maschinen-Automation GmbH Solid State Relays, 3-phase Zero-Point switching, heatsink integrated Main Characteristics: Three-phase controlled Zero switching LED display Various connection
More informationMR - MEDIUM RATING A
88 MR - MEDIUM RATING 160-1000A SECTION CONTENTS 90 General features 96 Advantages 100 Illustrated contents MR MEDIUM RATING 102 Trunking components 110 Feed units and end covers 113 Tap-off boxes 118
More informationRotary Disconnect Switches, Bulletin 194R
ROCKWELL AUTOMATION PROCUREMENT SPECIFICATION PROCUREMENT SPECIFICATION Rotary Disconnect Switches Bulletin 194R NOTICE: The specification guidelines in this document are intended to aid in the specification
More informationURDC-PV. Features and Benefits FUSES. URPV Fuses for PV Semiconductor Protection. gpv. Class: Voltage ratings: 600V DC to 1500V DC.
Fuses for PV Semiconductor Protection Class: gpv 0 Voltage ratings: 600V DC to 1500V DC Current ratings: 1 A to 450 A Standards: UL 2579 IEC 60 269-6 Approvals: E341342 E341490 Features and Benefits High
More informationBussmann 10x38mm Photovoltaic fuses 1000Vdc, 1-30A
Technical Data Effective March 0 Bussmann x38mm Photovoltaic fuses Operating class gpv and UL PV fuse links PV Fuse coordination With thin film cells and, 5 and crystalline silicon cells Description A
More informationControl Circuit Protection
Contents 5SJ4 Branch Circuit Protectors 5SY4 Supplementary Protectors 5SY6 Supplementary Protectors 16/19 5SJ4 Page Selection and ordering data 1-pole up to 63A 16/4 1-pole, 2-pole, 16/5 3-pole, 240VAC
More informationSystem Benefits Should you have any further questions, please contact our UL hotline at: +49 (0)9563/ Connection Technology EQUES Technology
System Benefits The small external dimensions of the 60mm busbar system allow for a wide range of busbars, so that it can be easily adapted to a wide range of currents. These features result in the particularly
More informationNH Solid Blades 690 VAC sizes 000 to 3
NH Solid Blades 6 VAC sizes 000 to gs-class Protistor NH 6 VAC fuse-links provide maximum flexibility in equipment design and ultimate protection for today s power conversion equipment. This range is a
More informationAC Switches: ML & MN Series DC Switches: MDC1A Series
AC Switches: ML & MN Series DC Switches: MDC1A Series Australian & New Zealand Distributor Leveltec Engineering Pty Ltd Gloucester P:+612 6558 9264 F:+612 6558 1002 Sydney P:+612 9299 5630 F:+612 6558
More informationSIRCO UL98 Load break switches standards UL and CSA 100 to 1200 A
The solution for Load break switches sirco-ul_022_b_1_cat > Power distribution. Strong points sirco_093_b_1_cat SIRCO 3 x 200 A > Reliability. > Safety of property and personnel. > Simplicity. > Easy assembling.
More informationProduct Data Sheets. C.27/4 Series C.27/6 Series C.27/7 Series
Product Data Sheets C.27/4 Series C.27/6 Series C.27/7 Series 11 C.27/4 TYPICAL APPLICATIONS: the capacitor is used in series to the start-winding of the singlephase electric motor, allowing its starting
More informationFuse switch-disconnectors
Fuse switch-disconnector FH000 is intended for fuse-links with blade contacts size 000. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
More informationBussmann NH Bases. Technical Data Effective October Product description: Standard features:
Technical Data 10163 Bussmann NH Bases Product description: Bussmann s range of NH bases has been designed with thermoplastic bodies, DIN-Rail and/or screw mounting (size 4 screw mounting only). This range
More informationCHCC_ (Class CC) CHM_ (UL midget/iec 10x38) CHPV_ (13/32 x 1-1/2 and 10x38 photovoltaic)
Supersedes August 2016 BUSSMANN SERIES Specifications: 2011/65/EU Volts 600 V (or less) UL 690 V (or less) IEC 1000 Vdc (or less) photovoltaic (PV) Amps 30 A UL 32 A IEC Short-Circuit Current Rating (SCCR)
More informationRX 3 M.C.B A up to 63 A
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 RX 3 M.C.B. 6000 A up to 63 A CONTENTS PAGES 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
More informationLEXIC Curv LIMOGES Cedex. Cats N (s) : /68/87/88, /48, /84/85, /76/77/95/96/97, /71/72 1.
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 LEXIC MCB s DX-H 80A, 100A, 125A Curv urves B and C CONTENTS PAGES 1. Description, use...1 2. Range...1 3. Overall dimensions...1
More informationFL series position switches
FL series position switches Selection diagram 0 08 0 9 0 0 0 Ball Ø. External rubber Ball Ø 8 mm, mm, stainless Glass fibre rod gasket stainless steel steel Adjustable lever Adjustable safety lever Bistable
More information