Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide...

Size: px
Start display at page:

Download "Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide..."

Transcription

1 Platform: DBALL Rev.: 058 Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This guide supports the installation of a DBALL in Remote Start Ready (RSR) mode. This solution offers three () configuration options to control your system: x OEM Lock Remote Start Activation, RF Kit or SmartStart (all sold separately). Remote Start Ready (RSR) is a function that enables the interface module to remote start the vehicle completely on its own. Consequently, there is no need for an aftermarket or an OEM remote starter in order to start the vehicle from a distance. Important! This product is NOT compatible with vehicles equipped with a manual transmission. Index Vehicle Application Guide... 0 Installation Wiring Diagram... Locating Components in the vehicle... SmartStart/XL0 Installation Notes... Programming Module Programming... Module Reset... Hard Reset... Feature & Option List... Feature Programming LED Diagnostics & Troubleshooting... Parking Lights Error Codes... Limited One-Year Consumer Warranty... Quick Reference Guide... 0 SmartStart Compatible SmartStart is equipped with DD, which means it can be connected to an interface module and used in Remote Start Ready (RSR) mode without the use of a remote starter. See the Module Programming section for more information. Hyundai is a registered trademark and property of its respective company.

2 Platform: DBALL Vehicle Application Guide Rev.: 058 Page The table below lists the vehicles and features which are compatible with this product. Refer to the following pages for more information on installation wiring, programming and troubleshooting for these vehicles. Vehicles 05 PK-Immobilizer Bypass-Data No Key Req'd DL-Arm Factory Security DL-Disarm Factory Security DL-Door Lock Control DL-Door Unlock DL-Driver Priority Unlock Hyundai Genesis (Smart Key) DL-Trunk / Hatch Release RS-x LOCK START (Start control using OEM Remote) RS-x LOCK STOP (Stop control using OEM Remote) RS-RAP Shut Down (Retained ACC Power) RS-Remote Start Ready RS-SmartStart.0 Compatible RS-Tach / RPM Output SS-Entry Monitoring ALL Door Pins SS-Entry Monitoring Hood Pin SS-Entry Monitoring Trunk/Hatch Pin SS-Factory Alarm Trigger Monitoring ST-Brake Status (foot brake) Legend: PK: Transponder & Immobilizer Override DL: OE Door Lock & Alarm Controls RS: Remote Start & Engine Controls SS: Integrated Security & Monitoring ST: Function/Feature Status

3 Platform: DBALL Wiring Diagram Rev.: 058 Page A Diodes (-) PTS : Brown/Black, pin 5 EMS COM Data: Red, pin 6 (-) PTS : Orange/Black, pin M06C - White conn. (located at smart key module) B-CAN Low: Orange, pin 9 B-CAN High: Green, pin 0 Diagnostic connector OBDII 8 9 D-CAN High: White, pin 6 6 D-CAN Low: Black, pin (+) Parking Lights: Green/Black, pin 5 A Diodes (+) Parking Lights: Brown/Black, pin (+) V a 0 I/P-A White conn. (Located at the front of fuse box) (+) Starter: Brown/Orange, pin HS CAN High: Tan/Black: HS CAN Low: Tan: Note: Hood pin only required on vehicles not equipped with a factory hood pin. Hood Pin M06A - White conn. (located at smart key module) (+) V (+) Accessory: Orange, pin a 0 (+) Ignition: White, pin (+) V: Red, pin I/P-C - Gray Conn. (Front of fuse box) FT CAN High: Orange/Green: 5 FT CAN Low: Orange/Brown: 6 (+) V: Red: (-) Ground (-) Ground: Black: (-) Parking Light Output: Black/White: (-) Push-to-Start: Green/Black: (+) Accessory Output: Gray: 6 (+) Starter Output: Gray/Black: 7 EMS COM Data: Orange/Black: (-) Ignition Output: Blue/Red: I/P-B - White connector (Front of fuse box) RF Prog. Button LED DBALL You can connect to either a XL0 RFTD OR a SmartStart module. Refer to the SmartStart/XL0 Installation Notes for more information. 0 Remote Start Safety Override Switch 6: White/Black,(-) Hood With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).

4 Platform: DBALL Locating Components in the vehicle Rev.: 058 Page Hyundai Genesis 05 Function Connector Name Color Pin Wire Color Polarity Connector Location B-CAN High M06-C White 0 Green Data Smart Key Module B-CAN Low M06-C White 9 Orange Data Smart Key Module D-CAN High OBDII White 6 White Data OBDII D-CAN Low OBDII White Black Data OBDII PTS M06-C White 6 Orange/Black (-) Smart Key Module PTS M06-C White 5 Brown/Black (-) Smart Key Module Ignition I/P-C Gray 7 White (+) IGPM/Fuse Box Accessory M06-A White Orange (+) Smart Key Module Start M06-A White Brown/Orange (+) Smart Key Module EMS COM M06-A White 6 Red Data Smart Key Module Parking Lights I/P-A White 5 & 6 Green/Black & Brown/Black (+) IGPM/Fuse Box V I/P-B White Red (+) IGPM/Fuse Box M06A - White connector (located at smart key module) I/P-B White connector (located at the front of fuse box) M06C - White connector (located at smart key module) I/P-C Gray connector (Front of fuse box) I/P-A White connector (Front of fuse box) 8 8 0

5 Platform: DBALL SmartStart/XL0 Installation Notes Rev.: 058 Page 5 The DBALL Remote Start Ready (RSR) solution offers three () configuration options to control your system: x OEM Lock Remote Start Activation, RF Kits or SmartStart (all sold separately). This section provides specific installation information for SmartStart and XL0. SmartStart Revision A SmartStart is optional and not included. It MUST be purchased separately. Configuration Wires (White & Brown or Blue) Cut Brown or Blue Loop OR DBALL CABLE pins DD ( pins, white) pins, not used LED SmartStart The modules must be connected in a specific order. Refer to the Module Programming section for more information. SmartStart Revision B SmartStart is optional and not included. It MUST be purchased separately. Configuration Wires (Gray & White) Connect Gray wire to (-) Ground 5 pins DBALL CABLE pins pins, not used THIS SIDE UP DD ( pins, white) LED The modules must be connected in a specific order. Refer to the Module Programming section for more information. Rft Kit The optional XL0 and antenna are not included and MUST be purchased separately. DBALL XOVER LED XL0 Prog. Button Antenna. Use the DD Crossover (XOVER) cable that is provided with XL0, and NOT the one in the DBALL package.. The modules must be connected in a specific order. Refer to the Module Programming section for more information. RF Kit & PKE Combination Refer to the Passive Keyless Entry (PKE) Installation Guide (N0T) for detailed wiring information. RF Kit, PKE & SmartStart BT Combination Refer to the Passive Keyless Entry (PKE) Installation Guide (N0T) for detailed wiring information.

6 Platform: DBALL Module Programming Rev.: 058 Page 6 Refer to the LED Diagnostics section for more information and for troubleshooting purposes. Important Make all the required connections to the vehicle, as described in the wiring diagram(s) found in this guide, and double check to ensure everything is correct prior to moving onto the next step. Note: Before connecting either the XL0 or SmartStart module to DBALL, it is important to ensure that the proper feature and function programming is selected using XpressVIP (version.5 or higher). Visit to download the latest version of the application. Warning! To take advantage of advanced features, you must use XpressVIP.5 or higher. Using version.9 or. will limit available functions and features.. Connect the interface module to your computer using the XKLoader.. Open an Internet Explorer browser (version 6 or higher), and go to The detail of the platform and firmware that is currently saved on the interface module will be indicated in the top right corner of the page.. Select the year, make and model of the vehicle; the page will refresh to display the compatible firmware.. In the search result page, select Config for RSR, and follow the instructions provided on the screen. 5. Once you have configured your options, click on the FLASH button to upload the firmware onto the interface module. 6. The following message will be displayed when the upload is completed: The flashing is successfully completed. You may now unplug the kit. You can now proceed with the programming instructions below. SmartStart Installation The DBALL module must be disconnected from any power source before SmartStart can be connected to it. Failing to do so could damage DBALL. a. To ensure that the DD communication between SmartStart and DBALL works properly, the Gray wire must be connected to a ground source (Rev B SmartStart), and the Brown or Blue loop must be cut (Rev A SmartStart). b. Do NOT connect the -pin harness (on SmartStart). Power and ground will be provided by the DBALL DD connector. Connect SmartStart to DBALL using the DD port. OR XL0 Installation Connect XL0 to DBALL using the DD port. SmartStart XL0 DD 0-pin DD 0-pin Connect the 0-pin, -pin and -pin harnesses to DBALL, then wait until the LED turns ON solid red. st DD 0-pin NOTE: To skip the transponder programming and use convenience features only press the programming button 5 times. The LED will turn then proceed to step. rd nd -pin -pin & Important: Do NOT press the brake pedal. Make sure the key is inside the vehicle. Press the Push-to-Start (PTS) button twice to turn the ignition ON. HOLD Key Inside the Vehicle Do NOT depress the X brake pedal ENGINE START STOP PUSH Go to the next page to complete the module programming.

7 Platform: DBALL Module Programming Rev.: 058 Page 7 The LED flashes then the green LED turns ON for seconds and shuts off. Note: When skipping transponder programming, the LED flashes then the LED turns ON for seconds and shuts off. & Flash & Green or seconds & Off Press the Push-to-Start (PTS) button once more to turn the ignition OFF. X ENGINE START STOP PUSH You have successfully completed the module programming sequence.

8 Platform: DBALL Module Reset Rev.: 058 Page 8 A module reset will only erase programming performed in the previous steps. All settings (firmware) and settings flashed to the module using the web config tool will not be affected. OR DD Installation If required for your installation, connect the 0-pin, -pin & -pin harnesses to the module. Press and hold the programming button, then connect the -pin DD harness. WW Installation If required for your installation, connect the 0-pin & -pin harnesses to the module. Press and hold the programming button, then connect the -pin harness to the module. th 5 st st DD 0-pin DD 0-pin rd nd th nd th rd -pin -pin -pin -pin Wait seconds until the LED turns ON solid then release the programming button. The LED then turns ON solid red. & & Release Hard Reset Warning Against Executing a Hard Reset! A hard reset will revert the flashed firmware back to its default settings. Depending on the installation, some settings (such as RFTD and DD options) may have to be reconfigured. See the Feature & Option List section of this guide. OR DD Installation If required for your installation, connect the 0-pin, -pin & -pin harnesses to the module. Press and hold the programming button, then connect the -pin DD harness. WW Installation If required for your installation, connect the 0-pin & -pin harnesses to the module. Press and hold the programming button, then connect the -pin harness to the module. th 5 st st DD 0-pin DD 0-pin rd nd th nd th rd -pin -pin -pin -pin Wait seconds until the LED turns ON solid, and wait 0 more seconds until the LED starts to flash and red. & Release the programming button. The LED turns ON solid red. Release &

9 Platform: DBALL Feature & Option List Rev.: 058 Page 9 It is recommended to configure all the features and options listed below using the configuration tool found on the module flashing page on The web offers more options; however, manual configuration of the features is possible using the information on this page. * Default Option Feat. Operation /Options Description RFTD Output Type Unlock Driver Priority Smart OEM Alarm Control. No RF Output* Module is connected to a remote starter using a standard installation.. RFTD Output Module is connected to an XL0 using an RSR or RXT installation (when available).. SmartStart Module is connected to SmartStart using an RSR or RXT installation (when available). Unlocks only the driver door on first press and unlocks all doors on a second press within 5. Driver priority* seconds.. All Unlocks all doors on first press.. Disabled. Safelock. Enabled* Smart OEM Alarm Control will synchronize with the OEM alarm so that it will disarm and rearm the vehicle in the remote start sequence, only when required. The reason for this is, factory alarm control must often be done by lock or unlock operation. This could create unnecessary actions on door lock modules, such as the horn to honk. When possible, Smart OEM Alarm Control will monitor the alarm and door lock status to detect if the disarm or rearm is required. If the vehicle is unlocked or is not equipped with factory alarm, the disarm/rearm will not be executed. Smart OEM Alarm Control will also monitor the remote starter actions so that the factory alarm control is not done twice. A remote starter, for which the Safelock feature is active, will work perfectly with this option and will make it invisible to the user. Feature Programming To enter feature programming routine - Turn the ignition ON, then OFF. - Within 5 seconds, press and HOLD the programming button until the LED turns ON (after seconds). Release the Programming button. - The LED will flash green once slowly to indicate the feature number is. After a short delay, the LED flashes red rapidly to indicate the current option of feature (i.e. x green followed by x red indicates feature is set to option ). The flashing sequence will repeat until a new command is entered. Changing feature options - Press the lock/arm or unlock/disarm button on aftermarket transmitter to change the option of the selected feature. When installing the DBALL in RSR using x OEM Lock Remote Start Activation only, there is no aftermarket transmitter on which to press lock/unlock to change the options of the selected feature. Tapping the green or blue lock/unlock wires on the black 0-pin harness to ground will change the option for the selected feature. - The LED flashes red rapidly the number of times equal to the current option number. After a short delay, the LED flashes green slowly the number of times to indicate the current feature. The flashing sequence will repeat until a new command is entered. Accessing another feature - Press and release the programming button a number of times to advance from the current feature to the next desired feature. - The LED flashes green slowly the number of times equal to the feature number. After a short delay, the LED flashes red rapidly to indicate the current option of the current feature. The flashing sequence will repeat until a new command is entered. When the maximum number of features or options is reached, the LED will start flashing again from the first feature or option. Once a feature is programmed - Other features can be programmed. - The feature programming can be exited. Programming Button Exiting feature programming - No activity for 0 seconds; after 0 seconds, the LED will turn ON for seconds to confirm the end of the programming sequence. OR - Press and HOLD the programming button for seconds. After seconds, the LED will turn ON for seconds to confirm the end of the programming sequence.

10 Platform: DBALL LED Diagnostics & Troubleshooting Rev.: 058 Page 0 LED Status Description Troubleshooting Module Programming Off Red green & red Off red green & red Module has no power. Waiting to begin the programming sequence. Initialisation failed. Make sure the DD harness is connected or that the Volt is present between the red and black wires. If the Volt is present, the module may be defective. Make sure that all the connections are correct (see wiring diagram) and press the Push-to-Start(PTS) button twice to turn the vehicle ignition ON and begin the programming sequence. Check the B-CAN wire connections. Wake up the data bus by turning the ignition on and try again. If a second attempt fails after a complete Hard Reset connect the module to Directechs.com and call Tech Support with the module ID in hand. green green x sec x sec FT CAN detected. Normal operation green CAN Bus detected. Normal operation green for seconds for seconds Module was successfully programmed. Module successfully programmed without bypass. Normal operation Normal operation Bypass has been skipped. Normal operation Module Programming - Error codes red x red x HS CAN not detected. Check the D-CAN wire connections. Wake up the data bus by turning the ignition on and try again. red x red x Bypass processing error. Bypass calculation failed. Verify if EMS COM is properly connected. Reset the module and try again. Might be caused by a bad reading in the first programming attempt or by "PTS" wire connection. If a second attempt fails, connect the module to and call Tech Support with the module ID in hand.

11 Platform: DBALL LED Diagnostics & Troubleshooting Rev.: 058 Page LED Status Description Troubleshooting External Module Synchronization red, red, red,red then x 0 OBDII feature not supported. Diagnostic data bus not detected. Active Ground While Running green red & green green red & green quickly GROUND OUT ON (GWR) command received. IGNITION ON command received. START ON command received. DD and WW Commands x LOCK command received. x x UNLOCK command received. x TRUNK command received. x x RSR Code red x 7 red x 7 x OEM Lock Remote Start Activation was attempted when RFTD feature is disabled. Otherwise, the Ground While Running (status) signal was lost or was never received by the module. Commands can come from RF, DD or WW. Otherwise, the ignition signal was not received by the module. In a WW install, it will show only if the ignition input wire is used. Otherwise, the start signal was not received by the module. In a WW install, it will show only if the ignition input wire is used. If the bypass module fails to flash, it means the module did not receive the signal. Activated from Web automatically when using RSR flash tool or can be done manually. Refer to feature programing section for more information. Parking Light Error Codes The parking lights on your vehicle will flash a specific number of times seconds following an unscheduled shutdown or failure to start. Each flashing pattern is described below. Diagnostic Runtime expired. Over-rev shutdown. Low/No RPM. Transmitter shutdown. 5 Brake shutdown. 6 Hood shutdown/remote start safety override switch is ON*. 7 Remote start safety override switch is ON*. * If the vehicle hood status is supported through data, safety override switch input will report 7 flashes.

12 Platform: DBALL Limited One Year Consumer Warranty Rev.: 058 Page For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. ( DIRECTED ) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the Part ), which proves to be defective in workmanship or material under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer s name, address, telephone number, the authorized licensed dealer s name and complete product and Part description. This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defect in materials or construction. TO THE MAXIMUM EXTENT ALLOWED BY LAW, EXCEPT AS STATED ABOVE, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NONINFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE, OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS, AND DIRECTED HEREBY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT, DAMAGE, OR VANDALISM. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER S PURCHASE PRICE OF THE PART. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED S OPTION THE PART AS DESCRIBED ABOVE. This warranty only covers Parts sold within the United States of America and Canada. Parts sold outside of the United States of America or Canada are sold AS-IS and shall have NO WARRANTY, express or implied. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part. For further details relating to warranty information of Directed products, please visit the support section of DIRECTED s website at: This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any consequential damages sustained in connection with the part(s) installation. The manufacturer and it s distributors will not, nor will they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data bus interface part(s) other than its replacement. N.B.: Under no circumstances shall the manufacturer and distributors of this product be liable for consequential damages sustained in connection with this product and neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than the replacement of this product only. Protected by U.S. Patents: 5,79,55; 6,0,60 B *; 6,,00 B; 6,9,6 B; 6,75,7 B; 6,97,7 B; 6,6,876 B; 6,9,5 B; 6,59, B; 6,696,97 B; 6,756,885 B; 6,756,886 B; 6,77,67 B; 6,8,89 B; 6,9,750 B; 7,00,0 B; 7,05,80 B; 7,0,86 B; 7,06,6 B; 7,06,7 B; 7,068,5 B; 7,05,679 B; Cdn. Patent:,0,8;,,99;,5,0;,5,0;,5,07;,5,08;,5,0;,0,97;,6,670;,5,089; European Patent:,05,8; Pat. Pending:,9,06. Made in Canada.

13 HOLD Quick Reference Guide DBALL-HYUNDAI7 Remote Start Ready (RSR) Installation Vehicle Takeover Press 5 the remote start button on the transmitter to start the vehicle.* Press the Unlock button on the factory or aftermarket remote.* Enter the vehicle, while making sure the factory remote is inside with you. Important: Do NOT press the brake pedal. Press the PTS button twice to turn the ignition ON. Press the brake pedal, put the car in gear and drive off. Press Unlock button on either remote* Do NOT press brake pedal Ready to drive off Press remote start button* X ENGINE START STOP * Your aftermarket remote may differ from the model shown in the illustrations. HOLD OR Enter vehicle with Smart Key PUSH Pit Stop Mode The Pit Stop Mode feature is practical when you need to stop and run an errand, but wish to keep the engine running. Stop the vehicle in a safe parking spot and put the gear in Park (P). Press the button to remote start the vehicle.* It is now safe to leave the engine running and exit the vehicle with the factory remote in hand. Note: We recommend that you always lock the doors of your vehicle when leaving it unattended. Stop & put vehicle in Park (P) Press remote start button* * Your aftermarket remote may differ from the model shown in the illustrations. Parking Light Error Codes HOLD & Exit vehicle with Smart Key The parking lights on your vehicle will flash a specific number of times seconds following an unscheduled shutdown or failure to start. Each flashing pattern is described below. P Diagnostic Runtime expired. Over-rev shutdown. Low/No RPM. Transmitter shutdown. 5 Brake shutdown. 6 Hood shutdown/remote start safety override switch is ON*. 7 Remote start safety override switch is ON*. * If the vehicle hood status is supported through data, safety override switch input will report 7 flashes.

14 Quick Reference Guide DBALL-HYUNDAI7 Remote Start Ready (RSR) Installation Remote Start Ready (RSR) Remote Start Ready (RSR) is a function that enables the interface module to remote start the vehicle completely on its own. Consequently, there is no need for an aftermarket or an OEM remote starter in order to start the vehicle from a distance. x OEM Lock Remote Start Activation This solution includes the option to remote start your vehicle by pressing the Lock button times consecutively. If your vehicle allows the OEM remote to remain active while the engine is running, you may shut down your remote starter by pressing the Lock button times once more. Note: The range offered by OEM remotes is limited and typically requires you to be within eyesight of the vehicle to control it. List of Available Commands Note that the information below is for Viper, Clifford and Python models. Icons and commands may differ depending on the remote brand and model purchased. Refer to your authorized installation center for more information. Button(s) x + x + x + Actions Press & hold for second to lock. Press & hold for second to unlock. Press & hold for second to remote start. Press & hold for 5 seconds to activate the trunk release (optional). Press once, then to activate the rear hatch/tail glass release (optional).* Press times, then to activate the panic mode. Press once, then to reset the remote starter runtime. * This output is configurable. see your authorized installation center for more information.

15 Quick Reference Guide DBALL-HYUNDAI7 Remote Start Ready (RSR) Installation SmartStart Compatible Notes This system is compatible with Directed SmartStart.0. For a complete list of supported features, please visit What is SmartStart? Now you can remote start, lock and unlock your car just by pushing a button on your smartphone; using the SmartStart App from Directed, the leader in vehicle security and remote start. The simple graphical interface gives you control over the following features of your installed remote start or security with remote start system: Lock/Arm Unlock/Disarm Remote Car Starter Trunk Release Panic Aux Channels You can also control multiple vehicles great for families and assign more than one user to control a vehicle. It's easy with SmartStart! But, this is only the beginning! SmartStart is loaded with additional features including GPS tracking, SmartSchedule, vehicle status, roadside assistance, home control, parked car finder and more..0 enables a "Cloud-Connected Car" like never before, providing an entirely new level of -way interaction with your vehicle. Connectivity is managed through the Directed Cloud Services (DCS) network linking car, app, end user, and the Internet. For more information, visit

Important! This product is NOT compatible with vehicles equipped with a manual transmission.

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide...

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide... Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

Installation Guide. Index. Vehicle Canbus Integration System

Installation Guide. Index. Vehicle Canbus Integration System Platform: CANMAX00 Rev.: 20003 Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product.

More information

The HYUNDAI4 firmware for DBALL2 is an all-in-one door lock and override module compatible with. Vehicle Application Guide...

The HYUNDAI4 firmware for DBALL2 is an all-in-one door lock and override module compatible with. Vehicle Application Guide... Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The HYUNDAI4

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission.

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide...

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide... Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The CHRYSLER8

More information

This module can only be flashed and configured using XpressVIP at or using the Directechs

This module can only be flashed and configured using XpressVIP at   or using the Directechs Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The NISS08

More information

Vehicle Application Guide... Installation Type 1... Type 2... Type 3... Wiring Reference Charts...

Vehicle Application Guide... Installation Type 1... Type 2... Type 3... Wiring Reference Charts... Platform: DBALL/DBALL Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide...

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide... Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The CHRYSLER9

More information

Door lock and key interface compatible with the latest Kia vehicles. The available features include brake, hood, trunk and door trigger sensors.

Door lock and key interface compatible with the latest Kia vehicles. The available features include brake, hood, trunk and door trigger sensors. Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

This module can only be flashed and configured using XpressVIP at or using the Directechs

This module can only be flashed and configured using XpressVIP at  or using the Directechs Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The HYUNDAI

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission.

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The TL

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide... Key2GO...

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide... Key2GO... Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

The optional Plug & Play T-Harness THCHD3 (sold separately) provides simpler and faster installation.

The optional Plug & Play T-Harness THCHD3 (sold separately) provides simpler and faster installation. Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

NISSAN 370Z INTELLI-KEY Rev.:

NISSAN 370Z INTELLI-KEY Rev.: Remote Starter NISSAN 70Z 009-00 INTELLI-KEY Rev.: 0096 009 Not included: x Fuse 5Amp x s Amp x Relays Override OEM Transponder Immobilizer Via Data (No Key Required). Interfaces directly with the latest

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission.

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

Vehicle Application Guide... Installation (Wiring Diagrams & Vehicle Wiring Reference Charts) Type 1... Type 2... Type 3...

Vehicle Application Guide... Installation (Wiring Diagrams & Vehicle Wiring Reference Charts) Type 1... Type 2... Type 3... Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

Platform: XK09 Firmware: DLVW1

Platform: XK09 Firmware: DLVW1 DL doorlock INTERFACE Upgradable Door Lock Alarm Interface Downloadable Firmware for Platform XK09: DLPKGM, DLGM5X, CHRYSLER, PLXR, PKN3, DLVW1, DLHO4, DLHO5, DLHY, DLKIA1, DLKIA2, DLCH2, DLCH3, DLCH4.

More information

The SUBARU1 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Subaru vehicles.

The SUBARU1 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Subaru vehicles. Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The SUBARU

More information

Vehicle Application Guide... Wiring Diagram... Wiring Connection Reference Chart... LED Diagnostics and Troubleshooting... Reset the module...

Vehicle Application Guide... Wiring Diagram... Wiring Connection Reference Chart... LED Diagnostics and Troubleshooting... Reset the module... Door Lock Alarm Interface Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product.

More information

Platform: XK09 Firmware: DLHO4

Platform: XK09 Firmware: DLHO4 DL doorlock INTERFACE Upgradable Door Lock Alarm Interface Downloadable Firmware for Platform XK09: DLPKGM, DLGM5X, CHRYSLER, PLXR, PKN3, DLVW1, DLHO4, DLHO5, DLHY, DLKIA1, DLKIA2, DLCH2, DLCH3, DLCH4.

More information

NISSAN MAXIMA INTELLI-KEY Rev.:

NISSAN MAXIMA INTELLI-KEY Rev.: Remote Starter NISSAN MAXIMA 2009-2011 INTELLI-KEY Rev.: 20091126 20110921 Not included: 1x Fuse 15Amp 3x s 3x Relays Override OEM Transponder Immobilizer Via Data (No Key Required). Interfaces directly

More information

The TL1 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific TOYOTA and LEXUS vehicles.

The TL1 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific TOYOTA and LEXUS vehicles. Platform: DBALL Firmware: TL Rev.: 005 Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing

More information

The FORD12 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Ford and Lincoln

The FORD12 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Ford and Lincoln Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The FORD12

More information

The TL4 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Toyota and Lexus vehicles.

The TL4 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Toyota and Lexus vehicles. Rev.: 0700 Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation

More information

Vehicle Application Guide...

Vehicle Application Guide... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

Installation Guide. Index. Vehicle Canbus Integration System

Installation Guide. Index. Vehicle Canbus Integration System Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Index

More information

INSTALLATION GUIDE Honda Accord HONDA Designed by Installers for Installers

INSTALLATION GUIDE Honda Accord HONDA Designed by Installers for Installers INSTALLATION GUIDE DB3 2011 Honda Accord - 403.HONDA56 3.22 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

INSTALLATION GUIDE Nissan Altima (Smart Key) NISS3HT 3.08 RSR. Designed by Installers for Installers

INSTALLATION GUIDE Nissan Altima (Smart Key) NISS3HT 3.08 RSR. Designed by Installers for Installers INSTALLATION GUIDE DB3 2009 Nissan Altima (Smart Key) - 403.NISS3HT 3.08 RSR Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer

More information

INSTALLATION GUIDE Chevrolet Impala GM Designed by Installers for Installers

INSTALLATION GUIDE Chevrolet Impala GM Designed by Installers for Installers INSTALLATION GUIDE DB3 2001 Chevrolet Impala - 403.GM2 4.04 Designed by Installers for Installers 2016 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

MODEL: GMDLBP. Installation Guide. Index DLPK. combo. Product Description. Product Features. GM Doorlock Alarm & Transponder/Passlock Interface

MODEL: GMDLBP. Installation Guide. Index DLPK. combo. Product Description. Product Features. GM Doorlock Alarm & Transponder/Passlock Interface MODEL: GMDLBP GM Doorlock Alarm & Transponder/Passlock Interface Installation Guide Product Description Data Bus Doorlock Alarm & GM Passkey/Passlock Interface: Lock/Unlock, Driver's Priority Unlock, Trunk/Hatch,

More information

This guide supports the installation of a DBALL in Range Extender Ready ( RXT) mode with or without a Plug & Play T-Harnesses OBDTHDGM1/ OBDGMD1 or

This guide supports the installation of a DBALL in Range Extender Ready ( RXT) mode with or without a Plug & Play T-Harnesses OBDTHDGM1/ OBDGMD1 or Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

Important! NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide...02

Important! NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide...02 Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The NISS3HT

More information

This firmware does not support transponder override. One factory programmed key is required to install a remote starter.

This firmware does not support transponder override. One factory programmed key is required to install a remote starter. Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

Vehicle Application Guide... Key2GO...

Vehicle Application Guide... Key2GO... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

Warranty Compatibility vehicle chart Bootloading CANMAX Installation (overview) Installation TYPE A...

Warranty Compatibility vehicle chart Bootloading CANMAX Installation (overview) Installation TYPE A... Page 1 to 12 Update Alert: Firmware updates are posted to the web on a regular basis. We recommend you check for firmware and/or install guide updates prior to installation of this product. INDEX Warranty...

More information

Vehicle Application Guide... Key2GO... Installation Without T-Harness... With T-Harness THCHD3...

Vehicle Application Guide... Key2GO... Installation Without T-Harness... With T-Harness THCHD3... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

INSTALLATION GUIDE Toyota Corolla (H Key) TL Designed by Installers for Installers

INSTALLATION GUIDE Toyota Corolla (H Key) TL Designed by Installers for Installers INSTALLATION GUIDE DB3 2017 Toyota Corolla (H Key) - 403.TL10 2.18 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only!

More information

INSTALLATION GUIDE Dodge/Ram CHRYSLER Designed by Installers for Installers

INSTALLATION GUIDE Dodge/Ram CHRYSLER Designed by Installers for Installers INSTALLATION GUIDE DB3 2016 Dodge/Ram 1500-403.CHRYSLER6 2.04 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

INSTALLATION GUIDE Toyota Camry (G Key) TL Designed by Installers for Installers

INSTALLATION GUIDE Toyota Camry (G Key) TL Designed by Installers for Installers INSTALLATION GUIDE DB3 2013 Toyota Camry (G Key) - 403.TL5 4.00 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only!

More information

Vehicle Application Guide... Key2GO... Installation Without T-Harness... With T-Harness THCHD3... Vehicle Wiring Reference Charts...

Vehicle Application Guide... Key2GO... Installation Without T-Harness... With T-Harness THCHD3... Vehicle Wiring Reference Charts... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

Vehicle Application Guide... Key2GO... Installation Wiring Diagram... Optional T-Harness... Wiring Reference Charts...

Vehicle Application Guide... Key2GO... Installation Wiring Diagram... Optional T-Harness... Wiring Reference Charts... Platform: DBALL/DBALL Rev.: 05050 Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this

More information

The FORD3 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Ford and Lincoln vehicles.

The FORD3 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Ford and Lincoln vehicles. Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The firmware

More information

The NISS3HT firmware for DBALL2 is an all-in-one door lock and override module compatible with. Vehicle Application Guide...02

The NISS3HT firmware for DBALL2 is an all-in-one door lock and override module compatible with. Vehicle Application Guide...02 Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The NISS3HT

More information

INSTALLATION GUIDE Mazda 6 (Smart Key) MA RSR. Designed by Installers for Installers

INSTALLATION GUIDE Mazda 6 (Smart Key) MA RSR. Designed by Installers for Installers INSTALLATION GUIDE DB3 2009 Mazda 6 (Smart Key) - 403.MA1 4.00 RSR Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only!

More information

INSTALLATION GUIDE Chevrolet Spark GM Designed by Installers for Installers

INSTALLATION GUIDE Chevrolet Spark GM Designed by Installers for Installers INSTALLATION GUIDE DB3 2015 Chevrolet Spark - 403.GM10 4.07 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

Door lock and transponder interface compatible with first generation Chrysler, Dodge and Jeep vehicles. Vehicle Application Guide...

Door lock and transponder interface compatible with first generation Chrysler, Dodge and Jeep vehicles. Vehicle Application Guide... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

Vehicle Application Guide... Installation (Wiring Diagram & Vehicle Wiring Reference Charts)...

Vehicle Application Guide... Installation (Wiring Diagram & Vehicle Wiring Reference Charts)... Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The GM

More information

INSTALLATION GUIDE Chevrolet Silverado GM Designed by Installers for Installers

INSTALLATION GUIDE Chevrolet Silverado GM Designed by Installers for Installers INSTALLATION GUIDE DB3 2010 Chevrolet Silverado 1500. 403.GM11 1.08 Designed by Installers for Installers 2018 Directed, Vista CA This product is intended for installation by a professional installer only!

More information

INSTALLATION GUIDE Dodge/Ram Grand Caravan CHRYSLER Designed by Installers for Installers

INSTALLATION GUIDE Dodge/Ram Grand Caravan CHRYSLER Designed by Installers for Installers INSTALLATION GUIDE DB3 2014 Dodge/Ram Grand Caravan - 403.CHRYSLER 7.23 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer

More information

Installation Guide. Index

Installation Guide. Index Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The XK09-PKN3

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide...

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Vehicle Application Guide... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

Installation Guide IMPORTANT! Index. Platform: XK09 Firmware: NISS01

Installation Guide IMPORTANT! Index. Platform: XK09 Firmware: NISS01 Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The XK09-NISS01

More information

MODEL: PLJX GM PASSLOCK 1 & 2 & VATS & ION SELF LEARNING DIGITAL INTERFACE: JUMPER SELECTION

MODEL: PLJX GM PASSLOCK 1 & 2 & VATS & ION SELF LEARNING DIGITAL INTERFACE: JUMPER SELECTION DL doorlock INTERFACE MODEL: PLJX GM PASSLOCK 1 & 2 & VATS & ION SELF LEARNING DIGITAL INTERFACE: JUMPER SELECTION INSTALLATION GUIDE PRODUCT DESCRIPTION PLJX is a "Self Learning" unit designed to bypass

More information

The SUBARU3 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Subaru vehicles.

The SUBARU3 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Subaru vehicles. Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The SUBARU3

More information

Type 3... Type 2... Type 4... Type 5... Type 6... Type 7...

Type 3... Type 2... Type 4... Type 5... Type 6... Type 7... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

Vehicle Application Guide...

Vehicle Application Guide... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide Door

More information

INDEX. Vehicle Canbus Integration System Rev.:

INDEX. Vehicle Canbus Integration System Rev.: Rev.: 24 Page 1 to Update Alert: Firmware updates are posted to the web on a regular basis. We recommend you check for firmware and/or install guide updates prior to installation of this product. INDEX

More information

Important! This product is NOT compatible with vehicles equipped with a manual transmission.

Important! This product is NOT compatible with vehicles equipped with a manual transmission. Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This

More information

INSTALLATION GUIDE. Directed Digital Solutions MIT2. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions MIT2. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions MIT2 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to

More information

The AS-2320TW kit offers a complete remote start solution including a 2-way LED transmitter/receiver and an all-in-one mobile integration module.

The AS-2320TW kit offers a complete remote start solution including a 2-way LED transmitter/receiver and an all-in-one mobile integration module. Owner s Guide The AS-2320TW kit offers a complete remote start solution including a 2-way LED transmitter/receiver and an all-in-one mobile integration module. Index Taking Inventory of the AS-2320TW Kit...

More information

INSTALLATION GUIDE. Directed Digital Solutions HK7. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions HK7. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions HK7 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install

More information

Programming Module Programming & Reset... Features & Options List... Features Programming... LED Diagnostics & Troubleshooting...

Programming Module Programming & Reset... Features & Options List... Features Programming... LED Diagnostics & Troubleshooting... Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The DBALL-NISS03

More information

INSTALLATION GUIDE Chevrolet Cruze GM Designed by Installers for Installers

INSTALLATION GUIDE Chevrolet Cruze GM Designed by Installers for Installers INSTALLATION GUIDE DB3 2011 Chevrolet Cruze - 403.GM10 4.12 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

Vehicle Application Guide... Installation Type A... Type B... Type C... Wiring Connection Reference Chart...

Vehicle Application Guide... Installation Type A... Type B... Type C... Wiring Connection Reference Chart... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide XK01-AMDL

More information

Vehicle Application Guide... Wiring Diagram...

Vehicle Application Guide... Wiring Diagram... Platform: DBALL/DBALL Firmware: GM Rev.: 050 Update Alert: Firmware updates are poed to e web on a regular basis. We recomme at you check for firmware a/or inall guide updates prior to inalling is product.

More information

Programming Module Programming & Reset... Features & Options List... Features Programming... LED Diagnostics & Troubleshooting...

Programming Module Programming & Reset... Features & Options List... Features Programming... LED Diagnostics & Troubleshooting... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The DBALL/DBALL2-NISS01

More information

ALWAYS TEST THE INSTALLATION ONCE A RELAY IS INSTALLED, TO ENSURE THE VEHICLE CANNOT BE STARTED IN GEAR.

ALWAYS TEST THE INSTALLATION ONCE A RELAY IS INSTALLED, TO ENSURE THE VEHICLE CANNOT BE STARTED IN GEAR. Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The DBALL-NISS2

More information

User guide. CANMAX400 Standalone. Thank you for purchasing a Directed Electronics, Inc. CANMAX400 solution.

User guide. CANMAX400 Standalone. Thank you for purchasing a Directed Electronics, Inc. CANMAX400 solution. Thank you for purchasing a Directed Electronics, Inc. CANMAX400 solution. CANMAX400 supports multiple data bus architectures including: CAN High speed, CAN Single Wire, CAN Fault Tolerant, GM-LAN, J1850,

More information

INSTALLATION GUIDE. Directed Digital Solutions MIT6. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions MIT6. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions MIT6 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to

More information

The GM9 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Buick, Cadillac, Chevrolet and GMC vehicles.

The GM9 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Buick, Cadillac, Chevrolet and GMC vehicles. Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The GM9

More information

2005 directed electronics, inc.

2005 directed electronics, inc. Viper Model 211HV Owner s Guide limited lifetime consumer warranty Directed Electronics, Inc. ("Directed") promises to the original purchaser to repair or replace with a comparable reconditioned model

More information

Understanding the RS-623 Remote... Using the RS-623 Remote... Listing the Available Commands...

Understanding the RS-623 Remote... Using the RS-623 Remote... Listing the Available Commands... Owner s Guide The RS-CHLED and RS-CHLCD kits each offer a complete remote start solution including a 2-way LED or LCD transmitter/receiver and an all-in-one mobile integration module. RS-CHLED RS-CHLCD

More information

INSTALLATION GUIDE. Directed Digital Solutions CHRYSLER10. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions CHRYSLER10. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions CHRYSLER10 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

INSTALLATION GUIDE. Directed Digital Solutions CHRYSLER13. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions CHRYSLER13. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions CHRYSLER13 Designed by Installers for Installers 2018 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

Directed Digital System

Directed Digital System Directed Digital System HYUNDAI2 Firmware Specific Guide This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional

More information

Directed Passive Keyless Entry System (PKE) Model 2102T Owner s Guide

Directed Passive Keyless Entry System (PKE) Model 2102T Owner s Guide Directed Passive Keyless Entry System (PKE) Model 2102T Owner s Guide 2012 Directed, Vista, CA G2102T Contents Government regulations...4 Warning! Safety first...6 Important information...6 System maintenance...6

More information

Vehicle Compatibility Chart...

Vehicle Compatibility Chart... Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide CANMAX400

More information

Directed Digital System

Directed Digital System Directed Digital System AUDI02 Firmware Specific Guide This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional

More information

INSTALLATION GUIDE. Directed Digital Solutions TL3. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions TL3. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions TL3 Designed by Installers for Installers 206 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install

More information

RF KIT TYPE: 1-Button Remote Controls 9816V, 9816P, 9816X. User s Guide

RF KIT TYPE: 1-Button Remote Controls 9816V, 9816P, 9816X. User s Guide RF KIT TYPE: 1-Button Remote Controls 9816V, 9816P, 9816X User s Guide 2016 Directed, Vista, CA G9816 2016-08 FailSafe, Learn Routine, Silent Mode, Valet, and Warn Away are all Trademarks or Registered

More information

DS4+ INSTALLATION GUIDE VW08. Designed by Installers for Installers

DS4+ INSTALLATION GUIDE VW08. Designed by Installers for Installers INSTALLATION GUIDE DS4+ VW08 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install this product by

More information

INSTALLATION GUIDE. Directed Digital Solutions GM4. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions GM4. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions GM4 Designed by Installers for Installers 2018 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install

More information

INSTALLATION GUIDE. Directed Digital Solutions VW08. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions VW08. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions VW08 Designed by Installers for Installers 2018 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to

More information

Model SSKR Automate Vehicle Anti-Theft System

Model SSKR Automate Vehicle Anti-Theft System Model SSKR Automate Vehicle Anti-Theft System Owner s Guide limited lifetime consumer warranty Directed Electronics, Inc. promises to the original purchaser to repair or replace with a comparable reconditioned

More information

INSTALLATION GUIDE. Directed Digital Solutions TL1. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions TL1. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions TL Designed by Installers for Installers 207 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install

More information

INSTALLATION GUIDE. Directed Digital Solutions CHRYSLER7. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions CHRYSLER7. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions CHRYSLER7 Designed by Installers for Installers 2016 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts

More information

REMOTE CENTRAL LOCK. Model: CLRxxx-ULT

REMOTE CENTRAL LOCK. Model: CLRxxx-ULT REMOTE CENTRAL LOCK Model: CLRxxx-ULT Contents Remote Lock, Remote Unlock, Car Finder, Remote Boot release:, Power Window outoput, Learning Transmitter Codes... page 3 Wiring Diagram... page 4 Introduction,

More information

AUTOMATIC AND MANUAL TRANSMISSION MODELS* *MUST USE M SERIES REMOTE STARTER!

AUTOMATIC AND MANUAL TRANSMISSION MODELS* *MUST USE M SERIES REMOTE STARTER! REV.2011.7.22 80 SERIES Advanced Remote Starters & Vehicle Security Systems AUTOMATIC AND MANUAL TRANSMISSION MODELS* *MUST USE M SERIES REMOTE STARTER! WARING: NEVER USE AN AUTOMATIC TRANSMISSION STARTER

More information

PRODUCT GUIDE HCF900A DOCUMENT NUMBER REVISION DATE

PRODUCT GUIDE HCF900A DOCUMENT NUMBER REVISION DATE PRODUCT GUIDE DOCUMENT NUMBER REVISION DATE 20161024 NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either

More information

CAN1 (Control Area Network) Bus Interface

CAN1 (Control Area Network) Bus Interface CAN (Control Area Network) Bus Interface Installation Guide NOTE: This product is intended for installation by a professional installer only! Any attempt to install this product by any person other than

More information

INSTALLATION GUIDE. Directed Digital Solutions FORD12. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions FORD12. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions FORD12 Designed by Installers for Installers 2018 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to

More information

2003 directed electronics, inc.

2003 directed electronics, inc. Model AM2 Owner s Guide limited lifetime consumer warranty Directed Electronics, Inc. promises to the original purchaser to repair or replace with a comparable reconditioned model any Directed Electronics,

More information

INSTALLATION GUIDE Acura TL (Smart Key). 933.HONDA Designed by Installers for Installers

INSTALLATION GUIDE Acura TL (Smart Key). 933.HONDA Designed by Installers for Installers INSTALLATION GUIDE DS4+ 202 Acura TL (Smart Key). 933.HONDA56 3.26.85 Designed by Installers for Installers 207 Directed, Vista CA This product is intended for installation by a professional installer

More information

INSTALLATION GUIDE Toyota Camry (Smart Key). 933.TL Designed by Installers for Installers

INSTALLATION GUIDE Toyota Camry (Smart Key). 933.TL Designed by Installers for Installers INSTALLATION GUIDE DS4+ 2010 Toyota Camry (Smart Key). 933.TL1 5.02.179 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer

More information

ADVANCED KEYLESS ENTRY SYSTEM INSTALL GUIDE.

ADVANCED KEYLESS ENTRY SYSTEM INSTALL GUIDE. REV.2009.04.10 KE-6 ADVANCED KEYLESS ENTRY SYSTEM TM INSTALL GUIDE www.ultrastarters.com FCC ID NOTICE This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:

More information

INSTALLATION GUIDE. Directed Digital Solutions GM2. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions GM2. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions GM2 Designed by Installers for Installers 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install

More information

Model 4003 Remote Start Owner s Guide

Model 4003 Remote Start Owner s Guide Model 4003 Remote Start Owner s Guide 2009 Directed Electronics, Vista, CA G4003L 2009-04 Contents Warning! Safety first...2 What is Included...4 Important Information...4 Your Warranty...4 Using Your

More information

INSTALLATION GUIDE. Directed Digital Solutions TL5. Designed by Installers for Installers

INSTALLATION GUIDE. Directed Digital Solutions TL5. Designed by Installers for Installers INSTALLATION GUIDE Directed Digital Solutions TL5 Designed by Installers for Installers 07 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install

More information

Directed Digital System

Directed Digital System Directed Digital System MIT4 Firmware Specific Guide This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional

More information