WHEATLEY Dual-Plate Wafer Check Valve. Space-saving design with a full bore for improved flow characteristics in backflow prevention applications
|
|
|
- Harry Ross
- 6 years ago
- Views:
Transcription
1 WHEATLEY DualPlate Wafer Check Valve Spacesaving design with a full bore for improved flow characteristics in backflow prevention applications
2
3 WHEATLEY DualPlate Wafer Check Valve DESIGN FEATURES Body Cameron s WHEATLEY dualplate valve s body design offers the following features: Compact waferstyle onepiece design Center post fully supports the internal assembly without external pins or plugs Standard design reduces a chance of leakage into the atmosphere, incorporating holes and pipe plugs throughout the body Maximum flow area reduces pressure loss Reduces installation space and time Valve Plates The dualplate design produces maximum strength with minimum opening and closing time. Clamp Plates The clamp plates offer additional strength to valve plates and allow seals to be changed easily. Seals Specially designed flat, full contact seals maintain positive shutoff at low working pressures and are easily replaced in the field. Springs Torsion springs assist valve plate closure, preventing flow reversal, and consistent valve response ensures against slamming and water hammer. Shaft The shaft contains heavyduty corrosionresistant construction. Shaft Supports Shaft supports act as stops to prevent the valve plates from overtraveling. They are corrosionresistant with large shaft bearing surfaces and remove easily for internal assembly, maintenance or change. Thrust Washers These reduce friction and wear of valve plate hinges. DESIGN SPECIFICATIONS Designed to meet the following: ASME B16.1 ASME B16.34 ASME B16.5 ASME Section II and VIII API 594 Conform to NACE MR0175/ISO API 598 Body Spring Shaft Sealing Member Clamp Plate Valve Plate Thrust Washer Shaft Support Note: Softseat seals are not available on Class valves. Class valves are only available with metaltometal sealing. 1
4 General dimensions ASME Classes // Size in. (mm) 2 (50) 3 (80) 4 (100) 6 () 8 (200) 10 (250) 12 () ASME Class A B C D E 23/8 (60) 23/8 (60) 23/8 (60) 27/8 (73) 27/8 (73) 27/8 (73) 27/8 (73) 27/8 (73) 31/8 (79) 37/8 (98) 37/8 (98) 53/8 (137) 5 (127) 5 (127) 61/2 (165) 53/4 (146) 53/4 (146) 83/8 (213) 71/8 (181) 71/8 (181) 9 (229) How to order 41/8 (105) 43/8 (111) 43/8 (111) 53/8 (137) 57/8 (149) 57/8 (149) 67/8 (175) 71/8 (181) 75/8 (194) 83/4 (222) 97/8 (251) 101/2 (267) 11 (279) 121/8 (308) 125/8 (321) 133/8 (340) 141/4 (362) 153/4 (400) 161/4 (410) 165/8 (422) 18 (457) 1/2 (12.7) 3/4 (19) 5/8 (16) 1 (25.4) 13/8 (35) 1/8 (3.2) 11/2 (38) 13/4 (44) 1 (25.4) 23/8 (60) 21/2 (64) 11/4 (32) 21/2 (64) 23/4 (70) 17/8 (48) 21/4 (57) 21/4 (57) 21/4 (57) 33/16 (81) 33/16 (81) 33/16 (81) 43/16 (106) 43/16 (106) 43/16 (106) 63/16 (157) 63/16 (157) 63/16 (157) 85/16 (211) 81/2 (216) 81/2 (216) 103/16 (259) 101/2 (267) 101/2 (267) 123/16 (310) 121/2 (318) 121/2 (318) 27/8 (73) 31/2 (89) 31/4 (83) 43/4 (121) 51/2 (140) 23/4 (70) 65/8 (168) 71/4 (184) 6 (152) 83/4 (222) 9/1/4 (235) 71/4 (184) 10 (254) 101/2 (267) 91/2 (241) Lifting Lug (see note 2) Springs (Only 1 req d. on 2 to 6 ) Valve Plate Flange Facing Body Clamp Plate Note 1: The shaft must be in a vertical position for horizontal flow application. Fastener Thrust Washer Shaft (See note 1) Shaft Support Sealing Member Note 2: The lifting lug feature is optional on 6 to 12 ( mm to mm) sizes Model Size End Connections Pressure Class Body and Trim 680 DualPlate Wafer Check Valve 02 = 2 (50 mm) 03 = 3 (80 mm) 04 = 4 (100 mm) 06 = 6 ( mm) 08 = 8 (200 mm) 10 = 10 (250 mm) 12 = 12 ( mm) 4 RTJ 5 Raised Face Note: Softseat seals are not available on Class valves. Class valves are only available with metaltometal sealing. 027/029 ASME 072/075 ASME 144/ ASME 121 = Carbon Steel Body, 316 Internals, Buna Seal, NACE, Inconel X750 Spring 122 = Carbon Steel Body, 316 Internals, FKM Seal, NACE, Inconel X750 Spring 180 = Carbon Steel Body, 316 Internals, Metalto Metal Seal, NACE, Inconel X750 Spring 321 = Stainless Steel Body, 316 lnternals, Buna Seal, NACE, Inconel X750 Spring 322 = Stainless Steel Body, 316 lnternals, FKM Seal, NACE, Inconel X750 Spring 380 = Stainless Steel Body, 316 Internals, Metalto Metal Seal, NACE, Inconel X750 Spring Example = DualPlate Wafer Check Valve, 2 (50 mm), RaisedFace End Connections, ASME (PN 20), Carbon Steel Body, 316 Internals, MetaltoMetal, NACE MR0175/ISO 15156, Inconel X750 Spring 2
5 Pressure Loss (psi) Pressure Drop Charts for Water Service (Based on Horizontal Flow Application) Flow Coefficients Valve Size in. (mm) C v* 2 (50) 58 21/2 (65) 92 3 (80) (100) (125) () (200) (250) 0 12 () (350) (400) (450) 13, (500) 18, () 32, (750) 45, (900) 69,000 Flow of Water at 70 F (21 C) (gal/min) * C V = the number of US gal/min that will result in 1 psi pressure loss across the valve at temperature of 60 F (16 C). Installation Information The valve must be installed with the shaft in a vertical position for horizontal flow applications. The valve body is marked with a flow direction arrow and TOP to assist with proper positioning. The WHEATLEY torsion spring design allows valve plates to open and close with minimum pressures. Valves are not recommended on discharge of reciprocating compressors and pumps. Please contact Cameron for current terms and conditions and trademark information. 3
6 CAMSERV Services for Valves and Actuation We build it. We back it. Global Network and Local Support Cameron is wellpositioned to deliver total aftermarket support, quickly and efficiently, with unmatched OEM expertise. Our highly skilled engineers and technicians are available around the clock, seven days a week to respond to customer queries, troubleshoot problems and offer reliable solutions. Easily Accessible Parts and Spare Valves OEM spare valves, actuators and parts (including non Cameron brands) Handling, storage, packaging and delivery Dedicated stocking program Comprehensive Aftermarket Services Portfolio Parts and spare valves Repair Field services Preventative maintenance Equipment testing and diagnostics Remanufacturing Asset preservation Customer property management Training and recertification services Warranty Customized Total Valve Care SM (TVC) Programs Customized asset management plans that optimize uptime, availability and dedicated services. Engineering consultancy Site management Flange management Startup and commissioning Spare parts and asset management Operational support USA CANADA LATIN AMERICA EUROPE RUSSIA AFRICA MIDDLE EAST ASIA PACIFIC 4
7 5
8 HEALTH SAFETY AND ENVIRONMENTAL EXCELLENCE 3250 Briarpark, Suite Houston, Texas USA Tel Learn more about WHEATLEY check valves: WHEATLEY@cam.com HSE Policy Statement At Cameron, we are committed ethically, financially and personally to a working environment where no one gets hurt and nothing gets harmed. CAMERON 2013 Cameron WHEATLEY is a registered trademark of Cameron. CAMSERV is a trademark of Cameron. Total Valve Care is a service mark of Cameron. SWP 1.5M 06/13 AD00827V
WHEATLEY Series 500. Fire-Tested Carbon Steel Flanged-End Check Valves
WHEATLEY Series 500 Fire-Tested Carbon Steel Flanged-End Check Valves Table of Contents WHEATLEY SERIES 500 FIRE-TESTED CARBON STEEL FLANGED-END CHECK VALVES API 6D/Drilling Production Features and Materials
CAMERON T31MAX High-efficiency Fully Welded Ball Valve
CAMERON T31MAX High-efficiency Fully Welded Ball Valve CAMERON T31MAX High-efficiency Fully Welded Ball Valve As one of the most trusted valves in the petroleum industry, the CAMERON T31MAX provides the
TOM WHEATLEY Piston Check Valves VALVES & MEASUREMENT
TOM WHEATLEY Piston Check Valves VALVES & MEASUREMENT Table of Contents TOM WHEATLEY PISTON CHECK VALVES Features... 1 How to Order... 2 Dimensions... 3 Materials of Construction... 4 Pressure-loss Curves
TOM WHEATLEY Swing Check Valves. Simple, field-proven design for backflow prevention in the global hydrocarbon industry
TOM WHEATLEY Swing Check Valves Simple, field-proven design for backflow prevention in the global hydrocarbon industry Table of Contents TOM WHEATLEY SWING CHECK VALVES Introduction... 1 Technical Overview...
Contents. Dimensions and weights
G4N Gate Valves Through-conduit, double block-and-bleed slab gate valves with fully protected seat faces for long-lasting, drop-tight shutoff in liquid pipelines Contents General information 3 Standard
GROVE IST. Integrated seat technology ball valve
GROVE IST Integrated seat technology ball valve Overview Critical applications require reliable, high-performing equipment to meet customer needs. Longer life span and a small, lightweight footprint are
VALVES & MEASUREMENT. TOM WHEATLEY Piston Check Valves TOM WHEATLEY
TOM WHEATLEY Piston Check Valves TOM WHEATLEY 2 TOM WHEATLEY TABLE OF CONTENTS TOM WHEATLEY Piston Check Valves Introduction... 4 Features... 5 How to Order... 6 Dimensions... 7 Materials of Construction...
CAMERON Compact Actuators HS Series. Minimum space. Maximum performance.
CAMERON Compact Actuators HS Series Minimum space. Maximum performance. CAMERON Compact Actuators HS Series CUSTOMER-FOCUSED SOLUTIONS Save valuable space with one of the smallest compact actuators on
DISCOVER VALVE AUTOMATION. Any valve. Any application. Best-fit valve automation solutions. LEDEEN MAXTORQUE DYNATORQUE
DISCOVER VALVE AUTOMATION Any valve. Any application. Best-fit valve automation solutions. LEDEEN MAXTORQUE DYNATORQUE Cameron brings together the expertise and technology of the world s premier brands
TBV Series Three-piece wafer valves
TBV Series 3100 Three-piece wafer valves Content TBV Series 3100 Three-Piece Wafer Valves Introduction................................................................................3 Features.....................................................................................4
V A L V E S & M E A S U R E M E N T. TOM WHEATLEY Piston Check Valves TOM WHEATLEY
TM TOM WHEATLEY Piston Check Valves TABLE OF CONTENTS PISTON CHECK VALVE Features 1 Installation & Operation 2 How to Order 2 Assembly & Disassembly 3 Dimensions Raised Face Flanged End 4 Dimensions Ring
Pump Division HDX. API 610 Radially Split, Double Suction Process Pump. Bulletin PS-20-4a (E)
HDX API 610 Radially Split, Double Suction Process Pump Bulletin PS--4a (E) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in
DISCOVER VALVES. Standard Service Critical Application High Quality WKM DEMCO NEWCO NUTRON
DISCOVER Standard Service Critical Application High Quality VALVES WKM DEMCO NEWCO NUTRON TECHNO TOM WHEATLEY WHEATLEY DOUGLAS CHERO THORNHILL CRAVER NAVCO AOP Cameron brings together the expertise and
DISCOVER VALVES. Standard Service Critical Application High Quality WKM DEMCO NEWCO NUTRON
DISCOVER Standard Service Critical Application High Quality VALVES WKM DEMCO NEWCO NUTRON TECHNO TOM WHEATLEY WHEATLEY DOUGLAS CHERO THORNHILL CRAVER NAVCO AOP Cameron brings together the expertise and
TBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal
TBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal transmitter performance Content TBV Valve Instrument
VALVES & MEASUREMENT. TEXSTEAM Super G Plug Valves TEXSTEAM
TEXSTEAM Super G Plug Valves TEXSTEAM 2 TEXSTEAM TABLE OF CONTENTS Introduction... 4 Design Standards... 5 Parts List... 6 Accessories and Repair Kits... 7 Reduced Port Dimensions and Weights... 8 Full
Experience In Motion UZDL. API 610 (BB1) Between Bearings, Two-Stage, Axially Split Pump
Experience In Motion UZDL API 610 (BB1) Between Bearings, Two-Stage, Axially Split Pump Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump
Distributed Valves VALVES & MEASUREMENT
Distributed Valves VALVES & MEASUREMENT About Cameron s Valves & Measurement Group Cameron s Valves & Measurement group is a leading provider of valves and measurement systems to the global oil and gas
Cameron s Rapid Response Centre in Europe
Cameron s Rapid Response Centre in Europe Proud supplier of valves, actuators, and gearboxes from industry-renowened brands: DOUGLAS CHERO DEMCO WKM NUTRON GROVE NEWCO OIC LEDEEN MAXTORQUE DYNATORQUE Company
Pump Division MSP. Vertical, In-line, Medium Speed Pump. Bulletin PS-10-1c (E/A4)
MSP Vertical, In-line, Medium Speed Pump Bulletin PS-10-1c (E/A4) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world
GROVE Valves. Durable, dependable technology in severe service conditions
GROVE Valves Durable, dependable technology in severe service conditions Contents History.......................................................................................2 GROVE IST* Integrated Seat
D I S T R I B U T E D V A L V E S. Super G Lubricated-Non-Lubricated Plug Valve TEXSTEAM
Super G Lubricated-Non-Lubricated Plug Valve SUPER G EXCLUSIVE FEATURES Built and tested in accordance with API 6A, API 6D & B16. Lubricated and non-lubricated in same valve. Use it either way Metal-to
D I S T R I B U T E D V A L V E S. TECHNO Short Form Wafer Style Check Valves TECHNO
TECHNO Short Form Wafer Style Check Valves SHORT FORM WAFER STYLE CHECK VALVES Technocheck Short Form (SF), Cost Efficient, Reliable, Wafer Style Check Valve CLAMP PLATE SUPPORT Non-Slam Quick Closure
WM WM2 ISO 13709/ API 610 (OH5) Close Coupled
HWM HWM2 API 6 (OH3) Pump Bearing Frame WM WM2 API 6 (OH5) Close Coupled Vertical In-Line, One- and Two-Stage, Low-Flow, High-Head Process Pumps Bulletin PS--25b (E) Pump Supplier To The World Flowserve
LEDEEN GS Series. Pneumatic and Hydraulic Actuators
LEDEEN GS Series Pneumatic and Hydraulic Actuators LEDEEN GS Series typical application For on/off or modulating control of any quarter-turn operated valve. Pneumatic Quarter-turn Actuator MODULAR ASSEMBLY
Double door, spring loaded, wafer check valve designed to protect your gas or liquid piping systems.
Double door, spring loaded, wafer check valve designed to protect your gas or liquid piping systems. Features Light weight, versatile design, 80 to 90% lighter than conventional full-body check valves.
LEDEEN SY Series Gas-Over-Oil and Direct Gas Actuators
LEDEEN SY Series Gas-Over-Oil and Direct Gas Actuators Gas-Over-Oil typical application For on/off control of any natural gas transmission ball or plug valve utilizing the high-pressure natural gas from
Pump Division HDX. API 610 Double Suction, Radially Split Process Pump. Bulletin PS-20-4 (E/A4)
HDX API 610 Double Suction, Radially Split Process Pump Bulletin PS--4 (E/A4) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump company
21000 Series Control Valves. Putting You In Control Series. High Performance Globe Style Control Valves
Putting You In Control 21000 Series Control Valves 21000 Series High Performance Globe Style Control Valves Versatile Reliable High Performance 2 Dresser Masoneilan EXPERIENCE, KNOWLEDGE, TECHNOLOGY. Heavy
Pilot-Operated Safety Relief Valves
NUFLO Pilot-Operated Safety Relief Valves Series H In the mid 1940s, a new relief valve actuated with a pilot rather than a spring set a new standard for pressure control. The valve, manufactured over
Triple offset technology for lower pressures.
Triple offset technology for lower pressures. Vanessa Series 30-RS Triple Offset Valves A triple offset valve designed for the specific needs of general applications in lower pressure classes. Emerson.com/FinalControl
P R O C E S S V A L V E S. The ORBIT Valve ORBIT
The ORBIT Valve ORBIT TABLE OF CONTENTS Introduction..................................... 3 Accreditations and approvals........................ 4 Design and manufacturing.......................... 5 Quality
MSG TURBO-AIR API. API 672 Centrifugal Air Compressor Packages Efficient, reliable, 100% oil-free air* *Per ISO certification
MSG TURBO-AIR API API 672 Centrifugal Air Compressor Packages Efficient, reliable, 100% oil-free air* *Per ISO 8573-1 certification Ingersoll Rand (NYSE:IR) advances the quality of life by creating comfortable,
JISKOOT Bunker Blending
JISKOOT Bunker Blending The goal of any bunker supplier is to blend bunker fuel at the lowest cost to meet a customer s specification.rising costs and fluctuations in feedstock quality make this more difficult
NON-SLAM PISTON CHECK VALVE GUARDIAN SERIES
NON-SLAM PISTON CHECK VALVE GUARDIAN SERIES BEHIND THE NAME With a renewed focus on product leadership through innovation and quality, C&C is your world class provider of flow solutions. Pulsating and
Pump Division. Durco Mark 3 In-Line. ASME (ANSI) B73.2 Vertical In-Line Chemical Process Pumps. Bulletin PS-10-15h (E/A4)
Durco Mark 3 In-Line ASME (ANSI) B73.2 Vertical In-Line Chemical Process Pumps Bulletin PS-10-15h (E/A4) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace.
ISO 9001 : Dual Plate Wafer Check Valves. API 594 Design API 598 Tested. Maximizing the Flow
ISO 9001 : 2008 Dual Plate Wafer Check Valves API 594 Design API 598 Tested Maximizing the Flow Meets API/ANSI/ASME Specifications Quick Delivery Dual Plate Wafer Check Valves The Industry Standard Dual
Pump Division DVSH. Heavy-Duty Between Bearings Single-Stage Axially Split Pumps. Bulletin PS-20-2 (E)
DVSH Heavy-Duty Between Bearings Single-Stage Axially Split Pumps Bulletin PS-20-2 (E) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump
25198:- 1/31/12 11:24 AM Page 2 Filtration Systems
Filtration Systems Indufil Filtration Systems Global Leadership in Design Expertise and Technical Support From its origins more than 95 years ago, John Crane has become a world leader in the design, development
Pump Division MSP Vertical, In-line, Medium Speed Pump
MSP Vertical, In-line, Medium Speed Pump Bulletin PS-10-1b (E/A4) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world
Bray/McCannalok High Performance Butterfly Valves Technical Manual
Bray/McCannalok High Performance Butterfly s TM123-6/1/215 TABLE OF CONTENTS Seating & Unseating Torques 1 ASME 15 - Torques (Lb-in) 2 ASME 15 - Torques (Lb-in) 3 ASME 3 - Torques (Lb-in) 4 ASME 6 - Torques
1900 Series Universal Media. Best Under Pressure Series. Universal Media Pressure Relief Valve
Best Under Pressure 1900 Series Universal Media 1900 Series Universal Media Pressure Relief Valve Flexibility Performance Durability 2 Dresser Consolidated Handles liquid and vapor interchangeably without
GE Oil & Gas. High-speed solutions. World-class HSR compressors and the worldwide service capabilities to support them
GE Oil & Gas High-speed solutions World-class HSR compressors and the worldwide service capabilities to support them Technology GE Oil & Gas offers a full line of API 11P high-speed reciprocating compressors,
Crane. UNI-CHEK High Performance Check Valves
Crane UNI-CHEK High Performance Check Valves High Performance Uni-Chek Valves for Backflow Prevention In almost every piping system, there is a need for backflow prevention. Most piping systems utilize
Pump Division AFV. Vertical Axial Flow Pumps. Bulletin PS-40-3 (E)
AFV Vertical Axial Flow Pumps Bulletin PS-0-3 (E) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the depth or
760 Tapping Machine. Features
760 Tapping Machine Sizes: 3- to 16-inch Model 760C Bulletin No: 1000.006.11 Version: 12.2017 Cross Indexing No: n/a Supersedes: 1000.00610 (06.2015) Model 760C Tapping Machines can be either air or hydraulically
Advantages of Active Magnetic Bearings
Advantages of Active Magnetic Bearings Rethinking Turboexpanders www.laturbine.com Advantages of Active Magnetic Bearings When designing a turboexpander unit, the decision to use one bearing style versus
Series 7100 Flow-Lift Piston Check Valve
Series 7100 Flow-Lift Piston Check Valve Award-Winning Design: Feature-packed valve provides solutions for gas, air or liquid systems The Norriseal Series 7100 Piston Check Valve* is designed for the prevention
API 594 Dual Plate Check Valve API 6D AxiaI Flow Check Valve. Complete Solutions for Industrial Valves NEWAY VALVE
API 594 ual Plate Check Valve API 6 AxiaI Flow Check Valve Complete Solutions for Industrial Valves NEWAY VALVE Cat.no.:EAV2015 Quality Commitment 1 SA / SBN NO.8 SBS NO.332 SBN / SBS B(SA / SBN) SA /
Installation Instructions
Installation Instructions Dual Gas Barrier Seals GB-200, GF-200, GX-200, and BufferPac Experience In Motion 1 Equipment Check 1.1 Follow plant safety regulations prior to equipment disassembly: Lock out
NELES BO SERIES BUTTERFLY VALVE FOR RECOVERY OF OXYGEN IN VACUUM PRESSURE SWING ADSORPTION (VPSA) PLANTS
NELES BO SERIES BUTTERFLY VALVE FOR RECOVERY OF OXYGEN IN VACUUM PRESSURE SWING ADSORPTION (VPSA) PLANTS Metso's Neles BO series butterfly valve is designed for use in vacuum Pressure Swing Adsorption
High CATALOG. Efficiency. Pilot Operated Safety Valves Series 810 Pop Action Series 820 Modulate Action. The-Safety-Valve.com
High Efficiency Pilot Operated Safety Valves Series 10 Pop Action Series 20 Modulate Action CATALOG The-Safety-Valve.com Valve finder How to find the right product group High operating to set pressure
Titan Check Valves. Call. Fax. . Visit. Titan Flow Control. Your Pipeline to the Future
Your Pipeline to the Future TITAN 290 Corporate Drive Lumberton, NC 28358 Titan Check Valves, Inc. is a high quality manufacturer of check valves. With a dedication to great customer service, cutting edge
KF Valves Check Valves
Check Valves Excellence In Flow Control High Performance By Design Applicable Standards KF check valves conform to ANSI, API and NACE specifications to meet your application requirements. ANSI- American
OBSOLETE DOCUMENT. 167D Series Switching Valves. Bulletin 71.7:167D. Introduction. Features
167D Series Switching Valves P1185 Type 167D Two-way Switching Valve Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are typically used to deliver constant reduced
Features. Model 570 Control Valve. Valve Sizes and Connections. Maximum Temperatures
Features Valve Sizes and Connections The 2, 3, 4, 6 and 8 flangeless valves will mate ANSI 150, 300, and 600 raised face flanges. Maximum Temperatures 650 F (343 C) Maximum. NACE Service Standard trim
DOUBLE BLOCK AND BLEED VALVES
DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance
PBV Ball Valves. Two Piece Flanged Trunnion Supported Ball Valves. REQUEST A QUOTE SCHEDULE SERVICES
PBV Ball Valves Two Piece Flanged Trunnion Supported Ball Valves REQUEST A QUOTE sales@dkamans.com SCEDUE SERVICES 562-529-8400 WWW.DKAMANS.COM Manufacturer of Quality Valve Products Around the Globe At
IFC Series DR Retainerless Dual Disc Check Valves
IF Series DR Retainerless Dual Disc heck Valves 6 1 2 3 4 9 7 8 5 10 Design Features Retainerless design meets industry fugitive emissions control requirements. This design eliminates the potential leak
Type MR108 Direct-Operated Backpressure Regulators
August 2013 Type MR108 Direct-Operated Backpressure Regulators P1202 P1203 TYPE MR108 WITH LOW- ACTUATOR TYPE MR108 WITH HIGH- ACTUATOR Figure 1. Type MR108 Direct-Operated Backpressure Regulators Contents
Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators
Instruction Manual Form 5116 Types 1808 and 1808A July 2010 Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators! Warning Failure to follow these instructions or to properly install
type 630r relief Valve
December 2011 type 630r relief Valve W1934 Figure 1. Type 630R Relief Valve Introduction The Type 630R is a general relief valve that is available in NPS 1 and 2 / DN 25 and 50 body sizes. It is frequently
Double Block & Bleed Pipeline Ball Valves Taurus Series
Double Block & Bleed Pipeline Ball Valves Taurus Series General Features Features Designed in accordance with Industry standards i.e. ASME B16.34, ASME B31.3, ASME B16.5, API 6D / ISO 14313 Full Bore Meets
Dual Plate Check Valves
ORION STEEL VALVES Dual Plate Check Valves API 594 DUAL PLATE DUAL PLATE WAFER CHECK VALVES API 594 - p. 84 Class ASME 150 (PN 20) 300 (PN 50) 600 (PN 100) 900 (PN 150) 1500 (PN 250) 2500 (PN 420) DUAL
Experience In Motion. MP1 Multiphase Twin-Screw Pump
Experience In Motion MP1 Multiphase Twin-Screw Pump Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the depth
Type 310A-32A Pressure Reducing Regulator
Bulletin 71.2 D102066X012 Type 310A February 2017 Type 310A-32A Pressure Reducing Regulator Figure 1. Type 310A Regulator with Type 32A Pilot Introduction The Type 310A pilot-operated high-pressure regulator
CROWN WAFER NOZZLE CHECK VALVES
CROWN WAFER NOZZLE CHECK VALVES Leading the Way in Pipeline Technology Product Scope and Applications PRODUCT SCOPE Sizes 2-12 ASME B16.34 and API 6D, pressure classes 150-900 Valve is offered in a wafer
Specification Data CH /10. Putting You In Control Series. Double Ported Globe Valves
Putting You In Control Specification ata CH000 11/ 000 Series ouble Ported Globe Valves resser Masoneilan 000 Series ouble Ported Globe Valves 2 resser Masoneilan Table of Contents Features...1 Numbering
ARIEL CORPORATION API 618 MODERATE-SPEED PROCESS COMPRESSORS Blackjack Rd Mount Vernon, OH
ARIEL CORPORATION API 618 MODERATE-SPEED PROCESS COMPRESSORS 740.397.0311 35 Blackjack Rd Mount Vernon, OH 43050 www.arielcorp.com Moderate-Speed Compressors Ariel API 618 Ariel s moderate-speed API 618
brands you trust. Noz-Chek - High Performance Nozzle-Type Non-Slam Check Valve Crane ChemPharma & Energy
brands you trust. Noz-Chek - High Performance Nozzle-Type Non-Slam Check Valve Crane ChemPharma & Energy Non-Slam Check Valves Scope of Line Sizes 2" 84" ASME B16.34 & API 6D, pressure classes 150 4500
API 6A Gate Valves. an ARRAY Products Group company
API 6A Gate Valves valves for wellhead, manifold, distribution and fracture applications an ARRAY Products Group company TABLE OF CONTENTS Valve Trim Chart... 2 2,000 5,000 PSI Expanding or Slab Gate
860 Tapping Machine. Features
860 Tapping Machine Tapping Sizes: 4- to 20-inches Model 860B Bulletin No: 1000.008.07 Version: 12.2017 Cross Indexing No: n/a Supersedes: 1000.008.06 (8.2016) Split Frame Boring Bar Description Features
Solids-Handling Pumps
MN Solids-Handling Pumps Bulletin PS-10-4a (E/A4) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the depth or
IndustrIal ValVes Product overview
Industrial Valves Product Overview AS-Schneider At Engineering Know-how AS-Schneider with its headquarters in Germany is one of the World's Leading Manufacturers of Instrumentation and Double Block & Bleed
167D Series Switching Valves
June 2011 167D Series Switching Valves P1185 P1184 167D TWO-WAY SWITCHING VALVE 167DA THREE-WAY SWITCHING VALVE Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are
LEDEEN Actuator and Control Solutions. Innovative solutions for pneumatic, hydraulic, gas-over-oil, direct gas and subsea applications.
LEDEEN Actuator and Control Solutions Innovative solutions for pneumatic, hydraulic, gas-over-oil, direct gas and subsea applications. Table of Contents Ledeen Actuator and Control Solutions Introduction...
SolenoidControl ValveSeries 115 SPECIFICATIONS
SPECIFICATIONS DIMENSIONS The OCV Series 115 Solenoid Control Valve is designed to provide on/off or open/close control of fluids in response to an electrical signal. The valve consists of the basic OCV
41005 Series Heavy Duty - Severe Service. Putting You In Control Series. Maximum Performance Globe Style Control Valves
Putting You In Control 41005 Series Heavy Duty - Severe Service 41005 Series Maximum Performance Globe Style Control Valves Excellent Performance In Severe Service Conditions 2 Dresser Masoneilan EXPERIENCE,
41005 Series. Masoneilan * Valves. Heavy Duty, Globe-Style Control Valves
GE Energy Masoneilan * Valves 41005 Series Heavy Duty, Globe-Style Control Valves Dependable globe-style control valve solutions for maximum performance in severe service conditions 41005 Series Cage-Guided
G. VULCANIZED SEAT Pressure sensitive seating with full disc overlap provides positive seating at high and low pressures.
SOLTECH LTDA Tecnologías e Ingeniería de Control A B C D G F E J H I A. RETAINER PLUGS Retain hinge and stop pins while providing compression to stabilization spheres. B. STABILIZATION SPHERES Stabilize
DeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES
BULLETIN 45.00-1 NOVEMBER 2017 DeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES Time-Tested, Exceptional Performance DeZURIK BHP High Performance Butterfly Valves are specially designed for applications in
Compac-Noz Valves High Performance Non-Slam Check Valves
Compac-Noz Valves High Performance Non-Slam Check Valves Compac-Noz Non-Slam Check Valves Scope of Line and Features Sizes 12" - 60" ASME B16.34 & API 6D, pressure classes 150-4500 API 6A pressure classes
Check Valve MODEL. Schematic Diagram. Product Dimensions Data:
Check Valve Simple Proven Design No-Slam Operation Drip-Tight Shut-Off No Packing Glands or Stuffing Boxes Easy to Install & Maintain 8-0 (Full Internal Port) MODEL 68-0 (Reduced Internal Port) The Cla-Val
Management Presentation. LMF - Leobersdorfer Maschinenfabrik
Management Presentation LMF - Leobersdorfer Maschinenfabrik 2015 LMF Product Portfolio and Business Segments Leobersdorfer Maschinenfabrik API Mobile & Industrial Compressor Systems After Sales & Services
BULLETIN FEBRUARY 2009 BHP HIGH PERFORMANCE BUTTERFLY VALVES
BULLETIN 45.00-1 FEBRUARY 2009 BHP HIGH PERFORMANCE BUTTERFLY VALVES Time-Tested, Exceptional Performance DeZURIK BHP High Performance Butterfly Valves are specially designed for applications in the chemical,
Design D4 Control Valve
Product Bulletin Design D4 Control Valve D4 Valve The Design D4 control valve is a compact, rugged globe valve designed primarily for high-pressure throttling applications. This valve is ideal for use
RHWX and RHWX-S Vertical In-Line Power Frame Upgrade Assemblies
RHWX and RHWX-S Vertical In-Line Power Frame Upgrade Assemblies ISO 13709/API 610 (OH3) Experience In Motion Pump Supplier To The World 2 Flowserve is the driving force in the global industrial pump marketplace.
Spring-assisted, Non-slam, Axial Flow, Silent Check Valves
DFT s family of In-Line Check Valves are available in a variety of designs: Basic-Check Restrictor Check SCV SCV-R Vacuum Breaker DLC BNCTM Excalibur GLC GLC -Cast Iron PDC DSV ALC FBC WLC WLC -Cast Iron
Series 2200 and 2220 Control Valves
Series 2200 and 2220 Control Valves Space-Saving Solution: Yokeless design fits tight separator and scrubber applications Series 2200 Series 2220 Norriseal Series 2200 and 2220 control valves have been
10000 Series Control Valves
GE Energy Technical Specifications 07/2012 Masoneilan * Valves 000 Series Control Valves ouble Ported Globe Valves Table of Contents Numbering System...2 General ata...2 Temperature Range / Seat Leakage...3
570, 571, 573 Control Valves
Features Valve Sizes and Connections The 2, 3, 4, 6, and 8 flangeless valves will mate ANSI, 300, and 600 raised face flanges. The 2, 3 4, 6, 8, 10, and 12 RF flanged 571 and 573 will mate with ASME (571)
WKM VALVES. Pow-R-Seal Gate Valves. REQUEST A QUOTE SCHEDULE SERVICES
WKM VALVES Pow-R-Seal Gate Valves REQUEST A QUOTE sales@dkamans.com SCHEDULE SERVICES 562-529-8400 WWW.DKAMANS.COM TABLE OF CONTENTS WKM Pow-r-seal Gate Valves Introduction... 3 Design... 4 Operating Principles...
Wafer Silent Check Valves
Applications Liquid Service Metals & Mining Process Industry Water & Waste Water Power Industry Pulp & Paper Chemical Industry Oil & Gas Wafer Silent Check Valves Pressures to 740 PSIG Temperatures to
Fisher D4 Control Valve Assembly
Product Bulletin D103039X012 Fisher D4 Control Valve Assembly D4 Valve The Fisher D4 control valve is a compact, rugged globe valve designed primarily for high-pressure throttling applications. This valve
SECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
Features. Dimensions - Materials - & Parts & Parts List List
MOYGRO check valve Features Compact Design - Short face-to-face length enabling installation in restricted spaces not possible with conventional check valves. Spring Assisted Closure - Providing faster
High performance valve with Nitrile/VITON elastomer. DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16.
Type series booklet 8460.1215/7--10 High performance valve with Nitrile/VITON elastomer DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16.34 Applications Marine,
CAMERON Fully Welded Ball Valves
CAMERON Fully Welded Ball Valves Engineered for heavy duty, limited maintenance performance, with the strength of forged components and a lightweight, compact, spherical design Table of Contents CAMERON
Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators
Bulletin 71.4 D0163X012 Type 1808 February 17 Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators Type 1808 Type 1808A Figure 1. Types 1808 and 1808A Pilot-Operated Relief Valves
HWM HWM2 WM WM2. API OH3 Pump Bearing Frame. API OH5 Close Coupled. One- and Two-Stage, Low Flow High Head Vertical In-Line Process Pumps
HWM HWM2 API OH3 Pump Bearing Frame WM WM2 API OH5 Close Coupled One- and Two-Stage, Low Flow High Head Vertical In-Line Process Pumps Bulletin PS--25 (E/A4) Pump Supplier To The World Flowserve is the