Driveline Components Catalog Small Parts

Transcription

1 Driveline Components Catalog Small Parts J300P-9 October 2016 Supersedes J300P-9 Dated December 2008 Our most comprehensive listing of Spicer small parts, including all the part numbers currently being produced. Product pictured is intended to be a representation of product category.

2 J300P-9 TABLE OF CONTENTS Balance Weight...3 Bearing Cap Hardware...12 Bearing Retainer Assembly...12 Bearing Seal Protector...13 Bearing Strap Assembly...11 Bolts, Flange/ Flange Yoke...6 Bolts, Hardware...8 Boot Kit...9 Cap & Bolt Assembly...12 Dust Cap, One Piece...15 Dust Cap Assembly...14 Dust Cap Dimensions...16 Dust Cap Seal Dimensions...15 Dust Cap Washer Dimensions...16 Lube Fitting...8 Key, Square...18 Key, Woodruff...18 Lock Strap, Full Round, SPL...13 Lockwasher...7 Lockwire, 1/2 Round...13 Nuts & Bolts...7,8 Plug, Cup...3 Plug, Flat...4 Plug, Welch...4 Shipping Strap...13 Snap Ring...10 Spring Tab...12 Tube Deadener...17 U-Bolt Assembly...11 Washer, Coupling Shaft

3 J300P-9 Small Parts Style Outside Height Dia. of Material Spicer Dia. Vent Hole Part Number STEEL NONE STEEL NONE STEEL NONE STEEL STEEL NONE STEEL NONE STEEL STEEL NONE STEEL STEEL STEEL NONE STEEL STEEL STEEL NPT STEEL STEEL STEEL STEEL NPT STEEL X Includes relief valve no NONE STEEL STEEL STEEL STEEL NONE STEEL STEEL Fits tube w/i.d. of 100mm STEEL Fits tube w/i.d. of 110mm STEEL STEEL Fits tube w/i.d. of 120mm NYLON NYLON NYLON NYLON X Includes relief valve no NYLON NYLON NYLON NYLON NYLON NYLON X Includes relief valve no NYLON NYLON NYLON NYLON X Includes relief valve no NYLON NYLON NONE ZYTEL NONE ZYTEL Cup Plugs Style 1 Style 2 Important: See Safety Information in General Information Section (J300P-GI) 3

4 Small Parts J300P-9 Flat Plugs Diameter Dia. of Material Spicer Vent Hole Part Number STEEL NPT STEEL NPT STEEL STEEL Welch Plugs Diameter Dia. of Material Spicer Vent Hole Part Number NONE STEEL NONE STEEL STEEL NONE STEEL STEEL STEEL NPT STEEL X Includes relief valve no NONE STEEL NONE STEEL Includes relief valve no NONE STEEL STEEL NONE STEEL NONE STEEL STEEL NPT STEEL X Includes relief valve no STEEL NONE STEEL STEEL NPT STEEL STEEL STEEL Important: See Safety Information in General Information Section (J300P-GI)

5 J300P-9 Small Parts Balance Weights Weight Style Spicer (oz.) Part Number Stainless steel weight for aluminum shafts Stainless steel weight for aluminum shafts Stainless steel weight for aluminum shafts Stainless steel weight for aluminum shafts Stackable balance weight Stainless steel weight for aluminum shafts Stackable balance weight Stainless steel weight for aluminum shafts Stackable balance weight Stackable balance weight Stainless steel weight for aluminum shafts Stackable balance weight Stackable balance weight Stackable balance weight Stackable balance weight Style 1 Style 2 Style 3 (Bent) Style 4 Style 5 (Curved) Style 6 Important: See Safety Information in General Information Section (J300P-GI) 5

6 Small Parts J300P-9 Bolts Head: Self Length Overall Spicer Thread Hex/12pt Hex. Locking Grade Under Thread Part Size Allen (Y or N) Head Length Number HEX.312 Y HEX.312 N N/A HEX.312 Y HEX.438 N HEX.500 N HEX.500 N HEX.500 N HEX.500 Y Serrated head bolt HEX.500 Y pt.422 Y N/A Bearing strap bolt pt.422 Y N/A Bearing strap bolt HEX.562 N Brake flange bolt HEX.562 N Brake flange bolt HEX.562 Y Serrated head bolt HEX.562 Y HEX.562 Y HEX.562 Y HEX.625 Y HEX.625 N HEX.625 Y N/A Serrated head bolt pt.565 Y N/A Serrated head bolt pt.565 Y N/A HEX.750 N HEX.750 N HEX.750 N HEX.750 N HEX.750 Y M HEX.714 Y N/A M Serrated head bolt M pt.565 Y Self locking bolt with lock patch M pt.535 Y M M was replaced by M HEX.708 N N/A M M pt.796 Y M HEX.394 N M M HEX.312 Y N/A M M HEX.312 Y N/A M HEX.500 N N/A M M ALLEN.236 Y M M HEX.312 Y M 6 Important: See Safety Information in General Information Section (J300P-GI)

7 J300P-9 Small Parts Nuts Self Lock Thread Spicer Part (Y or N) Size Hex Thickness Number N N N N N N M12 X M Y Y Uses cotter pin Bolts, Lockwashers and Nuts for Companion Flange/ Brake Disc/ Flange Yoke Connections Bolt Data Application Data Series Thread Under Shoulder Comp. Flange Brake Bolt Uses Uses Bolt Size Head Length Flange Yoke Disc Part L Washer Nut Torque Length Thick. Thickness Thick. Number Number Number (Lb. Ft.) SPL100/1610/ SPL140/ SPL140/SPL170/ SPL250/ / /1350/ /1350/ / , / , / , /1880/ Important: See Safety Information in General Information Section (J300P-GI) 7

8 Small Parts J300P-9 Shaft Nuts Thread size Nut Finish Part Number Torque to (lb. ft.) CADMIUM M20 X 1.5-6H YELLOW TINT NM M30 X 2 CADMIUM M36 X 1.5 ZINC PHOS BLACK SILVER BLACK Flange Diameter is BLACK Flange Diameter is SILVER BLACK Flange Diameter is BLACK Castle Nut Lube Fittings Style 1 Style Thread Hex Overall Spicer Size Length Part Number NPT # Installs w/screwdriver NPTF Use pliers to tighten degree fitting Style 2 Style 3 8 Important: See Safety Information in General Information Section (J300P-GI)

9 J300P-9 Small Parts Boot Kits Boot Lg. Clamp Sm. Clamp Spicer Lg. Dia. Sm. Dia. Boot Part Part Part Part Boot Boot Length Number Number Number Number incl bushing; Mounts between firewall & steer shft X SPL X X X X X was replaced by X; Originally used boot# , which is.760 longer X X X X X X X SPL SPL X X SPL X SPL X SPL170/ X SPL X SPL170/ X SPL170/250 Important: See Safety Information in General Information Section (J300P-GI) 9

10 Small Parts J300P-9 Style Fits Thick Color Spicer Brg. Dia. (+or ) Part Number NONE GREEN PURPLE NONE NONE COATED Coated for use in aluminum yokes COPPER WHITE YELLOW BLUE NONE COPPER NONE Coated for use in aluminum yokes WHITE PINK NONE WHITE COPPER YELLOW COPPER SILVER COPPER NONE NONE XTRA THICK-USED IN MERC KIT 5-589X NONE Spec for use on wheel joint NONE COPPER NONE was replaced by NONE NONE Snap Rings Style 1 Style 2 10 Important: See Safety Information in General Information Section (J300P-GI)

11 J300P-9 Small Parts CL-CL U-bolt Assemblies 2 U-bolts and 4 Nuts each Joint Thread CL-CL Fits U-bolt L washer Nut Nut Spicer Part Series Dia. Bearing No. No. No. Torque Number Cap Dia. (Lb. Ft.) 1210/1310/ X 1330 SPECIAL/3R X 1350/ X 1480/ X CL-CL Bearing Strap Assemblies 2 straps and 4 bolts each Joint Fits Thread Bolt Strap Bolt CL-CL Bolt Spicer Part Series Brg. Cap Dia. Length No. No. Torque Number Dia. (Lb. Ft.) SPL90/ X 1210/1310/ X X M8 X X 1350/ X 1355/ X 1480/ X X 1710/1760/ /1760/ X 3R N.S.S. N.S.S X X Uses Lockwasher X Important: See Safety Information in General Information Section (J300P-GI) 11

12 Small Parts J300P-9 Cap and Bolt Assemblies Bearing Retainer Assemblies 2 caps or 2 retainers and 4 bolts each CL-CL Joint Thread CL-CL Bolt Bolt Strap Bolt Part Series Dia. Torque Length No. No. Number (Lb. Ft.) SPL140 M12 X G X SPL170 M12 X G X SPL250 M12 X G X SPL350 M14 X G X X X X Style 1 Style Series SPL140/170/250 Series Bearing Cap Hardware/Spring Tab Lock Th d size Length Fits Bolt Used w/ Strap Under Series Part Lock Strap Style Head Number Number (2) Self locking bolt with lock patch /1760/ (3) - Self locking bolt with serrated head /1760/ (2) Self locking bolt with lock patch (2) - Self locking bolt with lock patch (2) - Self locking bolt with lock patch WING BEARING (1) Used with wing bearing type bearing caps 2 M8 X G.551 SPL140/170/ M (2) (SPL) Self locking bolt with lock patch (1) Used with wing bearing type bearing caps (2) Self locking bolts with lock patch (3) Self locking bolts with serrated heads Note: Spicer does not recommend re-use of self locking bolts and does not recommend using serrated head, self locking bolts with lockstraps. 12 Important: See Safety Information in General Information Section (J300P-GI)

13 J300P-9 Small Parts 1/2 Round Lockwires Series Part Number SPL SPL SPL Full Round Lock Straps/ SPL Lock Straps CL-CL Bolt Size Series Part Bolt Holes Number /1760/ Shipping Straps Series Part Number / Bearing Seal Protectors Bearing Kit Part Seal Protector Diameter Number Part Number SPL25-2X T SPL25-2X was replaced by X SPL90X SPL90X was replaced by SPL100-1X X X X X X X X X X X T 5-786X was replaced by X X X X T 5-790X was replaced by X X T Bearing Kit Part Seal Protector Diameter Number Part Number X T X T SPL30-2X SPL30-2X was replaced by X SPL36-2X SPL36-2X was replaced by X X X X X X was replaced by 5-793X SPL55-3X SPL55-4X SPL55X SPL70-4X SPL70X SPL100-1X SPL140X SPL170-4X SPL250-3X Important: See Safety Information in General Information Section (J300P-GI) 13

14 Small Parts J300P-9 Dust Cap Assemblies Series Dust Cap Washer Seal Type Dust Part Th'd End Part O.D./I.D. or Part Number O.D./I.D. or R=Round Cap Number R=Round Number O.D. of Spline O.D. of Spline S=Splined Assy S=Splined & # Teeth R=Rubber C=Cork & # Teeth /R C 1.594/1.000 R D2L 1000/ /R C 1.594/1.000 S D2A /S C /.875 R D1A was replaced by D1A /R C /.875 S D1B /R / R /.969 R D2F /R / C 1.594/1.000 R D2B /S R /.969 R D2K /R / C 1.641/1.156 R D2C /R / R 1.652/1.146 R D2M /R / R 1.750/1.219 R D2N 1310/ /R / C 1.641/ S D3E 1350/ /R / C 1.750/1.250 R D3A 1350/ /R / C 1.766/ S D3G 1350/ /R / R 1.750/1.219 R D3F /R / C 2.000/1.406 R D4F /R / C 1.750/1.250 R D3B D3B was replaced by D3A /R / C 1.750/ S D3K 1410/ /R / C 1.950/1.295 R D3H 1410/ /R / R 1.938/1.272 R D3N /R / C 1.938/ S D3J /R / C 2.703/1.730 R D3D /R / R 1.984/1.375 R D4G /R / C 2.000/1.400 R D4E /R / C 2.000/1.400 R D4A /R / C 2.203/1.406 R D4J /R / R 2.188/1.375 R D4M /R / C 2.205/ S D4K /R / C 2.953/1.910 R D4L /R / C 2.920/ S D10B /S / C 2.969/2.260 R D5C 1710/1760/ /R / C 3.547/2.875 R D6E /R / C 4.672/3.625 R D9A 14 Important: See Safety Information in General Information Section (J300P-GI)

15 J300P-9 Small Parts One Piece Dust Caps Dust Cap Seal Dimensions Used Fits Splined Slip Yoke Greasable On Type Shaft Dia. Spline Y=Yes Part Series Neck Dia. Size N=No Number SPL Y STEER 1 Y X Fits steering shaft w/4 splines Y X N ,1330, Y X Y X N N N , N N Part Type O.D. I.D./ No. of Thickness Material Number R=Round O.D. Spline Splines Teeth S=Splined R CORK R CORK R CORK R RUBBER R RUBBER S CORK S CORK S CORK R CORK R CORK R CORK R RUBBER R CORK R CORK R CORK R RUBBER S CORK R CORK R CORK R CORK R CORK R CORK R CORK R CORK R CORK R CORK R CORK S CORK R CORK R CORK R CORK Important: See Safety Information in General Information Section (J300P-GI) 15

16 Small Parts J300P-9 Dust Cap Dimensions Dust Cap Type I.D. Threads Hole Size Length Part Number R=Round & # Teeth S=Splined S was replaced by D1A S R S R R R R R R R R S R R R R was replaced by R Dust Cap Washer Dimensions Washer Type O.D. I.D. Round Part R=Round Hole/ No. of Thickness Number S=Splined O.D. Spline Teeth R S S R S S R R R R S R R R R R R R R R R R Important: See Safety Information in General Information Section (J300P-GI)

17 J300P-9 Small Parts Coupling Shaft Washers I.D. O.D. Thickness Part Number Tube Deadeners Fits Tube O.D. Tube Wall th k Length Part Number / / / /.083/ Can be used on 3.00 x.134 O.D. tube; will be replaced by when supply is exhausted /.095/ was replaced by / will be replaced by when supply is exhausted / / (SPL) (SPL) was replaced by Important: See Safety Information in General Information Section (J300P-GI) 17

18 Small Parts J300P-9 Square Keys Width Length Key Part Number.250 X was replaced by X X X Woodruff Keys Width Key Part Number Woodruff Spicer.312 B Important: See Safety Information in General Information Section (J300P-GI)

19 J300P-9 Notes Important: See Safety Information in General Information Section (J300P-GI) 19

20 Dana Aftermarket Group PO Box 1000 Maumee, Ohio Warehouse Distributors: OE Dealers: J300P-9 Printed in U.S.A. Copyright Dana Limited, All rights reserved. Dana Limited.