NXAirS Withdrawable Medium-Voltage Switchgear up to 24kV Air-Insulated

Size: px

Start display at page:

Download "NXAirS Withdrawable Medium-Voltage Switchgear up to 24kV Air-Insulated"

Lucas Gray
6 years ago
Views:

1 NXAirS Withdrawable Medium- Switchgear up to 24kV Air-Insulated

Contents Application Types Application Types Typical uses Classification Requirements Customer benefits and features Circuit-breaker switchgear NXAirS, is facty-assembled,

. Loss of service continuity categy Partition class Internal arc classfication LSC2B (Metal clad) PM(Metal) IAC A FLR I SC 31.

2 Contents Application Types Application Types Typical uses Classification Requirements Customer benefits and features Circuit-breaker switchgear NXAirS, is facty-assembled, type-tested, metal-enclosed and metal-clad switchgear f indo installation accoding to GB3906, DL404 (insulation) and IEC Loss of service continuity categy Partition class Internal arc classfication LSC2B (Metal clad) PM(Metal) IAC A FLR I SC 31.5kA arc duration=1s Technical Data Electrical data and dimensions Design data Transptation and packing Primary Solution NXAirS 24kV Design Design of switchgear Components Vacuum circuit-breaker Standards Standards, specifications, guidelines NXAirS panel Maxium rating 24kV/31.5kA/3150A

3 Application Application Typical uses Classification NXAirS circuit-breaker switchgear is used in substations and distribution system, mainly at the primary distribution level. E.g. Application Public power supply system Power supply companies Application Industry Power plant Cement industry Automobile industry Iron and steel wks Mining industry Textile, paper and food industries Chemical industry Petroleum industry Pipeline installations Offshe oil devices Electrochemical plants Petrochemical plants Diesel power plants Emergency power supply devices Coal exploitation NXAirS switchgear crespond to the following classifications accding to GB3906, DL404 (insulation) and IEC Loss of service continuity categy and partition class Loss of service continuity categy Partition class Accessibility to compartments Busbar compartment Switching-device compartment Connection compartment Internal arc classification The following internal arc classification are fulfilled IAC A FLR, I SC, t IAC A F L R LSC 2B (Metal clad) PM (Metal) Tool-based Interlock-based Interlock-based and use special tools =Internal arc classification =300mm distance of indicats f test (installation in closed electrical service location) =Front arrangement of indicats f test =Lateral arrangement of indicats f test =Rear arrangement of indicats f test I SC t =Test current f NXAirS up to 31.5kA =Arcing time 1s In this way, NXAirS is suitable f unrestricted application (wall freestanding arrangement) in electrical service locations up to the maximum sht-circuit current rating.

4 Requirements Customer benefits and features Benefits Peace of mind F power supply companies and industrial plants, the certification of NXAirS accding to the latest standards has very concrete a d v a n t a g e s, w h o s e s m o o t h operation provide maximum Features Type-tested switchgear accoding to GB, DL and IEC standard. Independent pressure-resistant partitions f each compartment. Use of maintenance-free vacuum circuit breakers. Type testing of the vacuum circuit breaker. Pressure-resistant partitions. Use of standard, wldwide available components. Quality management accding to ISO9001. safety f users. Saves Lives All switchgear types of the NXAirS family are approved with internal arc classification IAC A FLR, loss of service continuity categy LSC 2B, partition class PM. This makes them suitable f universal installtion, meeting the highest requirements regarding personal safety. All switching operations with high-voltage do closed. Metallic enclosure, earthed shutters and partitions. Reliable interlock mechanism installed on high voltage do. Switchgear with internal arc classfication accding to IAC A FLR. Loss of service continuity categy LSC2B. Busbar, cable connection and switching-device compartments are divided into independent compartment. Use of vacuum circuit breakers. Standard degree of protection IP4X. Shutters of busbar compartment cover the stationery contact f preventing electric shock to maintainer. Reliable mechanical interlocking system. Save money The adoption of newly designed 3AE maintenace-free embedded pole breaker enable continuous operation without expensive shutdown times. Stable insulation perfmance the use of embedded pole type VCB avoids the environment influence maximumly. Constant contact resistance the absence of oxidation in a vacuum keeps the metal contact surfaces clean. F this reason, contact resistance can be assured to remain low throughout the service life of the equipment. Large total breaking times Under the rated nmal current, the breaker can be interrupted up to 30,000 times. Maintenance-free within 10,000 times operation cycles throughout its entire service life, the vacuum interrupter operates reliably at all times without any fms of maintenance within 10,000 times operation 10 years. The arc voltage is thus extremely low-only 20 to 200V. And, on account of sht arcing times of max. 15ms, the energy consumption in the contact gap is very low.

5 Technical Data Electrical Data and Dimensions Rated values -Rated voltage kv 24 -Rated frequency Hz 50 -sht-duration power frequency withstand voltage (phaseto-phase, phase-to-earth) -lightning impulse withstand voltage (phase-to-phase, phaseto-earth) kv 65/79 kv 125/145 -sht-circuit breaking current (Max.) ka 25,31.5 -sht-time withstand current, 4s (Max.) ka 25,31.5 -sht-circuit making current (Max.) ka 63,80 -peak withstand current (Max.) ka 63,80 -busbar current A 1250, 2000, 2500,3150 -Feeder current A 1250, 2000, 2500,3150 Dimension Width W mm 1000 Height mm 2854/2620/2695 Depth D mm 1810/1848 Weight kg 900~1300 Dimension of low-voltage compartment Standard Width mm 1000 Height mm 630 Depth mm 400 Dimension of connection compartment Width mm 1000 Height mm 1150 Cable terminal to earth mm 750

6 Withdrawable Medium- Switchgear up to 24kV Air-Insulated Technical Data Design data Structure view of panel body Please consult f low indo height. A passage with 1200mm width must be avaibable alongside withdrawable part into this 2854 the panel so as to push the passage. Structure view of NXAirS 25kA/1250A Structure view of NXAirS 31.5kA/2500A Structure view of NXAirS 31.5kA/3150A

7 Technical Data Transptation and packing Transptation The following facts should be taken into account when deciding on the size of transpt units to be selected: Transpt facilities on site Transpt weights and dimensions Size of building doways Width m Dimensions, volume and weight Depth m Height m Volume m 3 Total weight kg One panel Two panels Three panels Packing Packing type Transpt by Method of packing Simple Road Panels on wooden pallets and cover the panels with polyethylene sheets bag. Standard Expt Rail and road Ship Panels on wooden pallets, cover the panels with polyethylene sheets bag and seal with wooden flo. Panels on wooden pallets, cover with polyethylene sheets bag by vacuumized treatment, welded together with desiccant bags and sealed with the fumigated wooden box board; max. stage:6 months Flo cutouts and fixing points 1.Foundation frame 2.Distance to the wall 3.Left-side wall 4.Fixing point, the rectangle hole is 60 20mm 5.Control cable cutout 6.High-voltage cable cutout 7.Building wall

8 Primary Solution NXAirS 24kV Withdrawable panel Busbar fittings Withdrawable sections Connection fittings transfmer Withdrawable vacuum circuitbreaker Current transfmer Current transfmer in busbars Disconnection link trsfmer in busbars Bus riser Earthing single-ce sealing ends f XLPE cables MEx. 2x500mm 2 per phase single-ce sealing ends f XLPE cables MEx. 4x500mm 2 per phase To describe Bars Panel ventilation

9 Primary Solution NXAirS 24kV Subsection busbar connection panel Withdrawable panel Bus riser panel, type I Busbar fittings Busbar fittings Withdrawable sections Withdrawable sections Connection fittings Connection fittings transfmer Withdrawable vacuum circuit-breaker Current transfmer Current transfmer Metering section transfmer Earthing Disconnection link transfmer fuses and arresters Earthing Panel ventilation Withdrawable panel Bus riser panel, type II Busbar fittings Busbar fittings Withdrawable sections Connection fittings Connection fittings transfmer Withdrawable vacuum circuit-breaker Current transfmer Current transfmer transfmer Earthing Disconnection link transfmer Earthing Panel ventilation Current transfmer transfmer Current transfmer transfmer

10 Primary Solution NXAirS 24kV Subsection busbar connection panel Withdrawable panel Withdrawable panel Busbar fittings Busbar fittings Withdrawable sections Withdrawable sections Connection fittings Connection fittings transfmer Withdrawable vacuum circuit-breaker Current transfmer Current transfmer Disconnection link transfmer Earthing Disconnection link Withdrawable vacuum circuit-breaker Current transfmer Panel ventilation Earthing Panel ventilation 10

11 Primary Solution NXAirS 24kV Busbar connection panels: Type I Busbar fittings Withdrawable sections Connection fittings transfmer Metering section Current transfmer Current transfmer in busbars transfmer fuses and arresters transfmer in busbars single-ce sealing ends f XLPE cables Mex 4 500mm 2 per phase bars Busbar connection panels: Type II transfmer Current transfmer Current transfmer in busbars transfmer in busbars single-ce sealing ends f XLPE cables Mex 4 500mm 2 per phase bars 11

12 Primary Solution NXAirS 24kV Cable connection panel and withdrawable metering panel Busbar fittings Connection fittings Continuous busbars Current transfmer transfmer transfmer in busbars Earthing switch single-ce sealing ends f XLPE cables Mex 2 500mm 2 per phase Withdrawable metering panel Busbar fittings Connection fittings transfmer in busbars Metering section Current transfmer in busbars transfmer fuses and arresters Bus riser single-ce sealing ends f XLPE cables Mex mm 2 per phase 12

13 Design Design of Switchgear Features All switching operations always with high-voltage do closed By operating a key the interlocking can be achieved by removing part of the withdrawable earthing and circuit-breaker of high-voltage Ergonomically favourable height f all control and indicat element Option: Verification of safe isolation from supply of feeder busbar by means of a capacitive voltage detection system Interlocks Interlocking conditions are satisfied accding to GB 3906 IEC Feeder earthing switch can only be operated with switching device in disconnected position Swithching device can only be moved on the movable part with the associated swithching device OPEN,earthing switch OPEN and the HV do closed Switching device can only be operated in testing, interlocked disconnected service position The high-voltage do can be closed only if the withdrawable part is in testing position Additional the safety interlocking Mechanical coding prevents insertion of switching devices f lower rated nmal currents into panels with higher rated nmal currents Interlocking of high-voltage do against withdrawable part Option: Withdrawalbe electromagnetic interlocks Option: Earthing electromagnetic interlocks Locking device of the low-voltage compartment. Opening f spring charge. Do knob f opening the highvoltage do. Indication of spring charge, circuit breaker & cycle counter of the circuit-breaker. Operation hole f in-service position locking. Position to move off the switch mechanism f the operation of the hole. Ventilation. Actuating opening to move the earthing switching device. Mechanical earthing switch position indicat ON opening f circuit breaker A. Swithching-device compartment B. Busbar compartment C. Connection compartment D. Withdrawable circuit-breaker E. Low-voltage compartment B A E D C 11. OFF opening f circuit breaker 1. Pressure release duct 1. Busbars 1. Embedded pole interrupter 1. Mechanism and interlocking unit f the circuit-breaker 1. Earthing switch 1. Cable connection 1. Current transfmer 1. Contact system 0. Contact box

Design Design of Switchgear Frame Bolted steel sections and sheets Rails to suppt the withdrawable section Steel sections and sheet galvanized Dos and front frame powder-coated, grey Installation

protection between individual compartments: IP20 C o m p l e t e c o m p a r t m e n t a l i z a t i o n maintained even with withdrawable section in connected position on account of the fitted

14 Design Design of Switchgear Frame Bolted steel sections and sheets Rails to suppt the withdrawable section Steel sections and sheet galvanized Dos and front frame powder-coated, grey Installation side panels powder-coated, grey Compartmentalization Bolted galvanized steel sheets divide the panel into the busbar compartment, withdrawable section compartment and connection compartment Degree of protection between individual compartments: IP20 C o m p l e t e c o m p a r t m e n t a l i z a t i o n maintained even with withdrawable section in connected position on account of the fitted penetration-type bushings Upper and lower static contacts fixed in penetration-type bushings Enfced operated metal shutters f opening closed the penetration-type bushings while the withdrawable section is being moved Metal shutters can be locked when the withdrawable section is racked out Upper shutter (access to busbar) lower shutter (access to cable) can each be unscrewed independently of the other Pressure relief (part) Partitions T h e u s e o f p a r t i t i o n i s t o s e p a r a t e the adjacent rooms into inaccessible compartment. Galvanized steel sheet Partition level PM IP4X protection class between busbar compartment and adjacent panels. The busbar compartment could choose the partition with bushing. Cable compartment Pressure relief Any overpressure inside the panel resulting from fault arcing is released by the pressure relief duct Galvanized sheet steel Separate pressure relief duct f busbar compartment, withdrawable section compartment and cable connection compartment 14

Design Design of Switchgear Busbar compartment Enclosure made of galvanized sheet-steel. Pressure is released upwards. Bushing disconnection is between switchgear and switchgear.

Option: Busbar voltage transfmer. Option: Coupling electrode f capacitive voltage detection system. Switching-device compartment Enclosure made of galvanized sheet-steel. Pressure is released upwards.

15 Design Design of Switchgear Busbar compartment Enclosure made of galvanized sheet-steel. Pressure is released upwards. Bushing disconnection is between switchgear and switchgear. Busbar adopts flat copper, bolted from panel to panel. Pressure-resistant partitions are between connection compartment and switchingdevice compartment. Option: Busbar earthing switch. Option: Busbar voltage transfmer. Option: Coupling electrode f capacitive voltage detection system. Switching-device compartment Enclosure made of galvanized sheet-steel. Pressure is released upwards. Panel front is coated with powder of epoxy resin. S h u t t e r o p e r a t i n g m e c h a n i s m separately f closing and opening the busbar compartment and connection compartment. A padlock can be chosen. High-voltage do resistant pressure while arc produced in the panel. Metallic ducts on the side are f laying control cables. L o w - v o l t a g e p l u g c o n n e c t o r f o r connection of control cables between primary part and secondary part. Follows various removable devices are f different panel versions. -Vacuum circuit-breaker -Handcart f disconnection -Removable metering unit Busbar compartment with rated current 3150A Connection compartment Enclosure made of galvanized sheet steel. Pressure is released upwards. Pressure-resistant partitions are between connection and busbar compartment. Earthing busbar Option: Coupling electrode f capacitive voltage detection. Option: Current transfmer. Option: Earthing switch. Option: transfmer. Option: Arrester f protecting the switchgear against external over voltages. Suitable f connection of - Single-ce XLPE cables up to4 500mm2 - Three-ce cables mm2 - Incoming copper bar with bushings. Busbar compartment with rated current 1250A 15

Components Vacuum circuit-breaker Features Embedded pole type of 3AE Meet standards of IEC 62 271 and GB 1984-2003.

16 Components Vacuum circuit-breaker Features Embedded pole type of 3AE Meet standards of IEC and GB Ideal contact material and figures to assure low chopping current and constant contact resistance. All parts meet Siemens Germany quality standard. Complete type test High mechanical operation life Maintenance-free within 10, 000 o p e r a t i n g c y c l e s u n d e r n o r m a l conditions. Few components and compact structure to assure me reliable and safe operation. Ideal switching of inductive load and capacity banks. 64-pole low-voltage plugs connect between circuit-breaker and fixed part. 16

17 Standards Standards, specifications, guidelines Standards The switchgear complies with the relevant standards and specifications applied at the time of type tests. Switchgear Devices Degree of protection NXAirS 24kV IEC 标准 GB 标准 IEC GB/T IEC GB 3906 Circuit-breaker IEC GB 1984 Disconnect and earthing switch IEC GB 1985 HV HRC fuses IEC GB detection device IEC IEC GB/T 4208 Insulation - IEC GB Transfmers Current transfmer IEC GB 1208 transfmer IEC GB 1207 Type of service location The switchgear can be used f indo installation in accdance with GB GB50259/IEC (Substation installations above 1kV AC) Access is restricted to authized personnel and persons who have been properly instructed in electrical engineering. Untrained unskilled persons may only enter under the supervision of authized personnel properly instructed persons. Table-Insulating capacity Rated voltage(rms value) kv 24 Rated sht-duration power-frequency withstand voltage ( rms value) - Across isolating distances kv 79 - Between phases and to earth kv 65 Rated lightning impulse withstand voltage(peak value) - Across isolating distances kv Between phases and to earth kv 125 Altitude crection fact Ka Insulating capacity The insulating capacity is verified by testing the switchgear with rated values of sht duration powerfrequency withstand voltage a n d l i g h t n i n g i m p u l s e withstand voltage accding to IEC /GB/T a n d D L ( S e e t a b l e Insulating capacity ) The rated values are referred to sea level and to nmal atmospheric conditions (101.3kPa, 20 C, 11g/m 3 humidity in accdance with IEC and GB 311.1). The insulating capacity decreases with increasing altitude. F site altitudes above 1000m (above sea level) the insulating capacity decreases, whose value is calculated by the crection fact Ka in the table. The c o r r e c t i o n f a c t o r K a i s determined by actual site altitude. Power-frequency Rated power-frequency withstand voltage test voltage 1.1 Ka Impulse test voltage Rated power-frequency impulse withstand voltage 1.1 Ka 17

18 Standards Withdrawable Medium- Switchgear up to 24kV Air-Insulated Standards, specifications, guidelines Standards Accding to GB 3906/DL404/IEC and GB/T 11022/IEC The earthing switch meets standard of GB1985/ IEC Current carrying capacity Internal arc classification Safety of operating personnel is ensured by passing internal arc test. Internal arc test perfmed in accdance with IEC / GB NXAirS comply with the internal arc classification IAC A FLR up to 31.5kA,1s, f maximumly ensure personal safety Current carrying capacities refer to the following ambient temperatures: Maximum of 24 hour average temperature +35 C Maximum + 40 C Switchgear can be used under the following climate classes and ambient conditions with additional measures. Environment condition -Natural feign materials -Chemical active pollutants -Small animals Climate classes 1. Ambient air temperature: -15 C~+40 C 2. Site altitude: 1000m and below 3. Relative humidity: Max.95% f 24 hours, max.90% f one month. 4. Earthquake intensity is smaller than magnitude Site without fire, blast danger, serious dirtiness and severe shocks. The climate classes are classified accding to IEC and GB It protects against solid feign bodies, electric shock and ingress of water. Definitions of criteria: Acceptance criterion 1 Covers and dos remain closed. Limited defmations are accepted. Acceptance criterion 2 No fragmentation of the enclosure. No projection of small parts above 60g weight. Acceptance criterion 3 No holes in the accessible sides up to a height of 2m. Acceptance criterion 4 Indicats do not ignite due to the effect of hot gases. Acceptance criterion 5 The enclosure remains connected to its earthing parts. Degree of protection of the switchgear: IP4X Degree of protection of compartments: IP20 18

20 Siemens Regional Offices(branches) in China Jinan Rep.Office Nanning Rep. Office Qingdao Rep. Office Fuzhou Rep.Office Kunming Rep.Office Chongqing Rep.Office Xi'an Rep.Office Siemens Switchgear Ltd.,Shanghai F.298 Tianning Road,Shanghai P.R.China Telephone: Fax: Order No.: JS035 Print Date: Print Quantity: 1500 SSLS-JS035-A

Type SIMOPRIME A4, up to 24 kv, Air-Insulated Medium-Voltage Switchgear

Circuit-Breaker www.siemens.com/energy Switchgear Type SIMOPRIME A4, up to 24 kv, Air-Insulated Medium-Voltage Switchgear s Technology Circuit-Breaker Switchgear Type SIMOPRIME, up to 17.5 kv, Air-Insulated