Project Valves Technical Data

Transcription

1 Project Valves Technical ata

2 Project Valves Technical ata ontents Introduction 1 ominator Z alancing Valves 5-15 Gate Valves Globe Valves heck Valves all Valves utterfly Valves Strainers Typical Kv valves 75 Nacton Road Ipswich Suffolk IP3 9QH United Kingdom Technical Helpline Tel: +44 (0) Fax: +44 (0) enquiries@cranefs.com Website: rane o company.

3 Introduction rane Fluid Systems rane Fluid Systems is a leading UK manufacturer of Valves, Fittings and Engineered Products for fluid handling applications in building services and general industrial markets. We aim to be our customers preferred supplier by offering products which provide best value together with service levels that exceed our customers expectations. ustomer Service The satisfaction of customer requirements is the defining philosophy of rane Fluid Systems. The position we hold in our markets is built on the foundations of product availability from our network of istributors and providing expert technical support to users of valves and pipe fittings. ustomers orders are received via EI, fax or telephone by our ustomer Service dministrators. Using our state-ofthe-art computer-based Enterprise Resource Planning System, we are able to immediately confirm product availability and price. Our computers ensure orders are seamlessly transmitted to our production managers who regularly review factory plans to ensure customer requirements are satisfied on time. omprehensive product selection and application advice is just a phone call away. Our Internal Sales Engineers are equipped to deal with complex valve application needs, receiving customers drawings and producing comprehensive valve schedules that will satisfy the design parameters of the heating and ventilating system. Our customers have come to regard this team as one of the most reliable sources of technical support. Quality ssurance Rigid quality control and inspection at all stages of manufacture ensure that rane products are fully suitable for their intended application and will give reliable service. Every valve and pipe fitting is individually tested in accordance with the relevant product standard. rane Fluid Systems is an approved manufacturer under various independent quality schemes including the ritish Standards Institution (SI) Kitemark and is ISO9001 accredited. In addition, the company has been approved and/or listed by various user organisations including the United Kingdom Water Fittings ye-laws Scheme (WRS approved). Health and Safety at Work ct Every effort is made to ensure that when properly used in accordance with stated recommendations, goods supplied are safe and without risk to health. Should the purchaser be uncertain as to the suitability for uses other than those stated, he/she should check with the supplier or rane Fluid Systems. ontrol of Substances Hazardous to Health Material supplied by rane Fluid Systems does not constitute substances as defined in the pproved ode of Practice of OSHH but complies with the requirements of the Health and Safety at Work ct Material supplied by rane may be handled and stored in complete safety. rane products are safe to use provided they are utilised for their intended function and used within the limitations specified by rane. Note: Material is defined as equipment, supplies and spares that form the subject of a contract (ref. S 4778). Pressure Equipment irective ll rane Fluid Systems products have been assessed in accordance with the Pressure Equipment irective 97/23/E and the Pressure Equipment Regulations 1999 No Each product has been classified into a conformity assessment category based on the intended fluid contents gas or liquid, the classification of the intended fluid contents Group 1 or Group 2, the maximum allowable pressure and the nominal size (N). rane products fall into either the Sound Engineering Practice (SEP), ategory 1, ategory 2 or ategory 3. ccording to the irective products classified as SEP shall not be E marked. ategory 1 products will bear the E mark and those products classified as ategories 2 and 3 will bear the E mark plus the number The number 0086 is that of the ritish Standards Institute who rane have chosen as their Notified ody to monitor their quality assurance system as required by the irective. This catalogue provides technical data on the most popular HV project valves in the rane range. It is not intended to cover the total range of rane valves. For details of all rane products please refer to the rane Total Product atalogue or website 1

4 Flow Management System for Fan oil Units ominator Z3000 PN16 Threaded SEN10226 formerly S21 (ISO 7) For Two Unit System Specification ombination unit comprising 931 Pro-alance valve, bronze ypass valve, 297 Strainer, rain ock, union and P84 pressure tappings. pplication The ominator Z3000 combines all the essential flow management components associated with fan coils, into one compact, fully assembled unit ready to connect. The unit provides much more efficient fitting of a factory-tested unit with known flow characteristics. End connection kits u OMP. MPRESS INSTFLEX LU-PEX (u,, ST.,St.St) KITS 15-R 1/2 15-R 1/2 16-R 1/2 16-R 1/2 15-R 3/4 18-R 1/2 20-R 1/2 16-R 3/4 22-R 1/2 15-R 3/4 20-R 3/4 18-R 1/2 22-R 3/4 18-R 3/4 25-R 3/4 18-R 3/4 28-R 3/4 22-R 3/4 25-R 1 20-R 1/2 28-R 1 28-R 3/4-20-R 3/4-28-R 1-25R- 3/ R 1 Materials Item Part Material 1 ypass valve ronze to SEN K 2 Probalance valve (see page 7) 3 Strainer 4 Union 5 Pressure tapping 6 rain cock ronze to SEN K rass to SEN K ZR to SEN W602N ZR to SEN W614 2

5 Flow Management System for Fan oil Units ominator Z3000 PN16 ominator Z3000 Standard Unit - STTI Figure No. Kg RV Kvs Total Kv mm mm 0E06680T Z3004 N15/ E06681U Z3003 N15/ E06682V Z3001 N15/ E06683W Z3004 N20/ E06684X Z3003 N20/ E06685Y Z3001 N20/ E06686 Z3001 N20/ E06687 Z3001 N25/ E06688 Z3001 N25/ E06764W Z3004 N15/15EXS E06765X Z3003 N15/15EXS E06689 Z3001 N15/15EXS E06844V Z3004 N20/15 EXS E06845W Z3003 N20/15 EXS E06690V Z3001 N20/15EXS E06691W Z3001 N20/20EXS E06692X Z3001 N25/20EXS E06693Y Z3001 N25/25EXS UTO 0E06766Y Z3000 N15/ n/a E06767 Z3000 N20/ n/a E06768 Z3000 N20/ n/a E06771V Z3000 N15/15EXS n/a E06772W Z3000 N20/15EXS n/a E06773X Z3000 N20/20EXS n/a ominator Z3010 Less Strainer and rain - STTI Figure No. Kg RV Kvs Total Kv mm mm 0E06782Y Z3014 N15/ E06783 Z3013 N15/ E06784 Z3011 N15/ E06785 Z3014 N20/ E06786 Z3013 N20/ E06787E Z3011 N20/ E06788F Z3011 N20/ E06789G Z3011 N25/ E06790Y Z3011 N25/ E06791 Z3014 N15/15EXS E06792 Z3013 N15/15EXS E06793 Z3011 N15/15EXS E06828V Z3014 N20/15EXS E06829W Z3013 N20/15EXS E06794 Z3011 N20/15EXS E06795E Z3011 N20/20EXS E06796F Z3011 N25/20EXS E06797G Z3011 N25/25EXS UTO 0E06830P Z3010 N15/ n/a E06831Q Z3010 N20/ n/a E06832R Z3010 N20/ n/a E06833S Z3010 N15/15EXS n/a E06834T Z3010 N20/15EXS n/a E06835U Z3010 N20/20EXS n/a ominator Z3020 Less Strainer but Including rain - STTI Figure No. Kg RV Kvs Total Kv mm mm 0E06798H Z3024 N15/ E06799J Z3023 N15/ E06800H Z3021 N15/ E06801J Z3024 N20/ E06802K Z3023 N20/ E06803L Z3021 N20/ E06804M Z3021 N20/ E06805N Z3021 N25/ E06806P Z3021 N25/ E06807Q Z3024 N15/15EXS E06808R Z3023 N15/15EXS E06809S Z3021 N15/15EXS E06810K Z3024 N20/15EXS E06811L Z3023 N20/15EXS E06812M Z3021 N20/15EXS E06813N Z3021 N20/20EXS E06836V Z3021 N25/20EXS E06837W Z3021 N25/25EXS UTO 0E06838X Z3020 N15/ n/a E06839Y Z3020 N20/ n/a E06840R Z3020 N20/ n/a E06841S Z3020 N15/15EXS n/a E06842T Z3020 N20/15EXS n/a E06843U Z3020 N20/20EXS n/a

6 Flow Management System for Fan oil Units ominator Z3000 PN16 Features to note The Z3000 is compact and lightweight The complete unit is factory tested Integrated union joints allow for custom alignment 80mm supply/return centres allow for ease of lagging Ease of installation The patent protected bypass valve unit comprises two T-ported ball valves llows easy back flushing, forward flushing and isolation The position of the T-handle gives clear indication of flow/bypass mode esigned around 3/4 full bore ball for optimum flow an be adapted to 1/2, 3/4 and 1 end connections Simple attachment to existing hangers The strainer unit has an integral drain cock and pressure test point Enabling measurement of pressure drop across load llowing for flushing of strainer and coil without need to remove basket The balancing valve is of proven high quality and accuracy. enefits for esign Engineers enefits for Installing ontractors - minimal design involvement - all the necessary components supplied as one tested unit - no risk of a component being omitted from a system at installation - known performance of the entire unit - saves time, reduces specification risks and provides maximum value to the client - Significant reduction in site labour and installation costs - fast connection of one complete assembly - standardised components with guaranteed tested performance - less purchase orders, minimal administration - simple on-site connection Normal Operation ypass Operation ackflush oil Operation Forward Flush Operation 4

7 Flow Measurement evice (FM) 901/902 PN25 Threaded SEN10226 formerly S21 (ISO 7), onforms to S7350* Specification 901 & 902 flow measurement devices have square edged entrance orifice plates with tappings for P84 insertion style test points. Flow measurement accuracy of ±3% s 3 /4 to 2 Inlet - SEN10226 formerly S21 (ISO 7 ) taper female Outlet - SEN10226 formerly S21 (ISO 7) taper male 901/902 - s 1 /2 N15 Inlet - S 2779 (ISO 228) parallel female supplied with compression adaptor to suit 15mm S EN 1057 copper tube. Outlet - SEN10226 formerly S21 (ISO 7) taper male discard adaptor if connecting steel pipe. pplication 901 flow measurement devices are suitable for systems where pipes have been sized on the basis that pipe frictional losses lie in the range 100 to 400 Pa/m. 902 flow measurement device ( 1 /2 /N15 size only) is suitable for the measurement of ultra low flows in the range to 0.06 l/s e.g. flows to fan coil units. Please note: The fitting of P82 test points will give an increased temperature rating of 180º. *Except pressure rating exceeds S. Pressure Temperature Ratings Temperature º -10 to Pressure (ar) Maximum temperature 120º Note: In line with S EN 1254/2 the maximum pressure must not exceed 16 bar when using compression adaptors. imensions, oefficient and s at. No. Nom. End to end entre-to-top Flow Head loss Kvs mm 1 mm mm Kv K Kg /2 N /4 N N /4 N /2 N N /2 N Materials Part Material Specification ody and Integral orifice ZR copper alloy SEN12164 W602N P84 Pressure test point ZR copper alloy SEN12164 W602N 5

8 Flow Measurement evice (FM) M900 S EN (formerly S 4504) Flange Mounting for Flow Measurement Specification M900 is a stainless steel orifice plate having integral orifice with true square upstream edge. The two stainless steel extension tubes are fitted with rane at. No. P84 double seal pressure test points. ccuracy of flow measurement at normal velocities is ±3%. Installation The M900 can be mounted between valve and/or pipe flanges to S 4504 having PN10, PN16 or PN25 ratings. The outside diameter ensures a proper alignment when installed between PN10/16 flanges and PN25 flanges up to 80mm size. When assembling between PN25 flanges sizes 100mm and larger, ensure the device has been correctly centred with the mating flanges. pplication M900 can be used as a single unit or close coupled to other regulating or isolating valves to provide accurate flow measurement. M900 flow measurement devices are suitable for use with PN10. PN16, or PN25 flanges or flanged valves having ratings detailed in the appropriate flange or valve product standard. When normally fitted with P84 pressure test valves, the M900 is limited to 120º max. For use at temperatures above 120º suitable alternative pressure test valves should be fitted, please consult rane. M900 is also available in sizes 350mm and over. Please contact rane Fluid Systems for details. Please note: The fitting of P82 test points will give an increased temperature rating of 180º. Pressure/temperature ratings Temperature 0-10 to Pressure (ar) Materials Part Orifice and carrier Extension tubes Pressure test points (P84) Material Stainless steel Stainless steel ZR oefficients N Face-to-face entre-to-top Outside diameter mm mm mm kg N Flow Headloss Kvs Kv K

9 ouble Regulating Valve (RV) 921/923 PN25 Threaded SEN10226 formerly S21 (ISO 7) For Two Unit System, onforms to S7350* Specification Y-pattern globe valves having characterised throttling disk tending towards equal percentage performance. ouble regulating feature allows valve opening to be set with an llen key. Operation of the valve is by means of the Microset hand wheel. WRS approved. End onnection s 1 to 2 SEN10226 formerly S21 (ISO 7) parallel s 1 /2 & 3 /4 N15 & N20 S 2779 (ISO 228) parallel, supplied with compression adaptor to suit 15 & 22mm S EN 1057 copper tube. iscard adaptors if connecting to steel pipe. ll sizes are also available threaded NSI pplication In two unit systems, the 921 has sufficient authority to give effective regulation over the range of flows covered by matching flow measurement devices/valves. In particular the 923 low flow regulating valve has an authority matched to the range of ultra low flows covered by the 902 flow measurement device. *Except pressure rating exceeds S. Pressure Temperature Ratings 1 (size 1 /2-15mm 3 /4-22mm only) (all sizes) Temperature º -10 to Pressure (ar) Maximum temperature 120º Note: In line with S EN 1254/2 the maximum pressure must not exceed 16 bar when using compression adaptors. imensions, oefficient and s Fully Open at. No. Nom. imensions Flow Head loss 1 Kv K Kg /2 N /4 N N /4 N /2 N N /2 N Materials Part Material Specification Part Material ody ronze SEN K O Ring Seal EPM Rubber onnet ZR copper alloy SEN12165 W602N Hand Wheel Plastic Stem ZR copper alloy SEN12164 W602N isk ZR copper alloy SEN12164/5 W602N 7

10 Fixed Orifice ouble Regulating Valve (FORV) 931/933/934 PN25 Threaded SEN10226 formerly S21 (ISO 7) for Single Unit Systems, onforms to S7350* Specification Y-pattern globe valves having characterised throttling disk tending towards equal percentage performance. Integral square edged entrance orifice plate and P84 insertion test points fitted. ouble regulating feature allows valve opening to be set with an llen key. Operation of the valve is by means of the Microset hand wheel. End onnection s 1 to 2 SEN10226 formerly S21 (ISO 7) parallel s 1 /2 & 3 /4 N15 & N20 S 2779 (ISO 228) parallel, supplied with compression adaptor to suit 15 & 22mm S EN 1057 copper tube. iscard adaptors if connecting to steel pipe. WRS pproved. ll sizes also available threaded NSI pplication This single unit commissioning valve 931 is designed for installation in circuits where combined functions of regulation and flow measurement are required. ccuracy of flow measurement is ±5% across all hand wheel settings. 933 size 1 /2" low flow FORV combines the functions of regulation and flow measurement in a unit of high authority making it particularly suitable for low flow applications in the range of 0.03 to 0.07 I/s. 934 size 1 /2" ultra low flow FORV combines the functions of regulation and flow measurement in a unit of high authority making it particularly suitable for ultra low flow applications in the range of to 0.04 I/s. *Except pressure rating exceeds S. Pressure Temperature Ratings 1 (size 1 /2-15mm 3 /4-22mm only) (all sizes) Temperature º -10 to Pressure (ar) Maximum temperature 120º Note: In line with S EN 1254/2 the maximum pressure must not exceed 16 bar when using compression adaptors. imensions, oefficient and s Fully Open at. Nom. imensions Flow Head loss KVs No. 1 Kv K Kg /2 N /4 N N /4 N /2 N N /2 N /2 N Materials Part Material Specification Part Material Specification ody ronze SEN K O Ring Seal EPM Rubber onnet ZR copper alloy SEN12165 W602N Orifice Insert ZR copper alloy SEN12164 W602N Stem ZR copper alloy SEN12164 W602N P84 Test Point ZR copper alloy SEN12164 W602N isk ZR copper alloy SEN12164/5 W602N Hand Wheel Plastic 8

11 Motorised Fixed Orifice ouble Regulating Valve 981/983/984 PN16 NSI lass 150 The rane Motoalance Valve offers actuated balancing solutions for heating and cooling applications and with its unique fixed orifice design, gives greater accuracy of flow measurement. Operation of the Motoalance valve is by means of motorised actuation. Motoalance is based on the proven rane 931 FORV, modified for use with the following type of actuators:- - 24v or 230v thermal actuators for On/Off control. - 24v fully modulating control actuators Motoalance is fitted with rane P84 test points. Specification Y-pattern globe valve. Integral square edged entrance orifice plates and P84 insertion test points fitted. ouble regulating feature allows valve opening to be manually set. Operation of the valve is by means of motorised actuator. End onnection s 1 /2 and 3 /4 N15 & N20 S EN ISO 228 parallel, supplied with compression adaptor to suit 15mm and 22mm S EN 1057 copper tube. iscard adaptors if connecting to steel pipe. ll sizes also available threaded NSI pplication The Motoalance valve is designed for installation in circuits where combined functions of actuated regulation and flow measurement are required. ccuracy of flow measurement is ± 5% across all drive setting The 1 /2 Motoalance has a flow range of to l/s. The 3 /4 Motoalance has a flow range of to l/s /2 low flow Motoalance is particularly suitable for low flow applications in the range of 0.03 to 0.07 l/s /2 ultra low flow Motoalance is particularly suitable for ultra low flow applications in the range of to 0.04 l/s. Pressure Temperature Ratings The maximum static pressure is 16 bar, the maximum differential pressure is 1.2 bar. Maximum working temperature: 120º Minimum working temperature: -10º Temperature º -10 to Pressure (bar) Note: In line with S EN 1254/2 the maximum pressure must not exceed 16 bar when using compression adaptors. Materials Part Material Specification ody ronze SEN K onnet ZR copper alloy SEN12165 W602N Stem ZR copper alloy SEN12165 W602N isk EPM rubber O Ring Seal EPM rubber S Orifice Insert ZR copper alloy SEN12165 W602N P84 Test Point ZR copper alloy SEN12165 W602N imensions, oefficient and s Fully Open at. imensions Flow Head loss Nom. KVs No. 1 Kv K Kg 981 1/2 N /4 N /2 N /2 N

12 ouble Regulating Valve (RV) M921 PN16 Flanged SEN (formerly S4504) for Two Unit System Specification Y-pattern globe valves having a characterised throttling disk and ends flanged S 4504 PN16. The valve opening may be set with an llen key to control flow at a pre-determined rate. Operation of the valve is by means of a handwheel incorporating a micrometer/vernier device. bronze seat ring and PTFE disk seal are incorporated to ensure tight closure. The valves can be rendered tamper proof by means of wire seals. Valves conform to requirements of S7350. pplication In two unit systems, the M921 has sufficient authority to regulate flow in circuits incorporating a flow measurement device. Pressure/temperature ratings Temperature º -10 to Pressure (bar) Ratings align with SEN PN16 (formerly S 4504) Materials Part ody onnet onnet gasket isc (65 to 150mm) isc (200 to 300mm) isc insert Stem Gland (65 to 150mm) Gland (200 to 300mm) Gland nut Packing Seat ring Material uctile Iron uctile Iron Non-asbestos ronze ast Iron PTFE 316 SS rass ast Iron rass Non-asbestos ronze oefficients* N Face-to-face mm entre-to-top mm kg N Flow Kv Headloss K * Fully open position 10

13 Variable Orifice ouble Regulating Valve (VORV) M931 PN lass 125 M931 Flanged SEN (formerly S4504) Single Unit System 931 Flanged NSI lass 125 Specification These are Y-pattern globe valves M921 fitted with two P84 pressure test points to provide flow measurement, regulation and isolation. Valves conform to requirements of S7350. pplication Primarily used in injection or other circuits requiring a double regulating valve for systems balancing. ccuracy of flow measurement is ±5% at the full open position of the valve. Some reduction in accuracy occurs at partial openings of the valve. Please note: The fitting of P82 test points will give an increased temperature rating of 180º Pressure/temperature ratings Temperature º -10 to Pressure (bar) Ratings align with SEN PN16 (formerly S4504) Materials Part ody onnet onnet gasket isc (65 to 150mm) isc (200 to 300mm) isc insert Stem Gland (65 to 150mm) Gland (200 to 300mm) Gland nut Packing Seat ring Material uctile Iron uctile Iron Non-asbestos ronze ast Iron PTFE 316 SS rass ast Iron rass Non-asbestos ronze oefficients* N Face-to-face mm entre-to-top mm kg N Flow Kv Headloss K * Fully open position 11

14 Fixed Integral Orifice ouble Regulating Valve (FORV) M941 PN16 941lass 125 M941 Flanged SEN (formerly S4504) Single Unit System 941 Flanged NSI lass 125 Specification These are Y-pattern globe valves M921 manufactured complete with integral orifice plates forming a fixed orifice flow measurement unit with regulation and isolation capacity. Two P84 test points supplied. Valves conform to requirements of S7350. pplication Primarily used in injection or other circuits requiring a double regulating valve for systems balancing. ccuracy of flow measurement is ±5% at the full open position of the valve. Some reduction in accuracy occurs at partial openings of the valve. Please note: The fitting of P82 test points will give an increased temperature rating of 180º Pressure/temperature ratings Temperature º -10 to Pressure (bar) Ratings align with SEN PN16 (formerly S4504) Materials Part ody onnet Orifice plate onnet gasket isc (65 to 150mm) isc (200 to 300mm) isc insert Stem Gland (65 to 150mm) Gland (200 to 300mm) Gland nut Packing Seat ring Material uctile Iron uctile Iron ronze Non-asbestos ronze ast Iron PTFE 316 SS rass ast Iron rass Non-asbestos ronze oefficients* N Face-to-face mm entre-to-top mm kg N Flow Kv Headloss K Kvs * Kv and K at fully open position 12

15 Gearbox Operated ouble Regulating Valve M925G PN16 Specification The M925G ouble Regulating utterfly Valve comprises a fully lugged, EPM liner butterfly valve fitted with a ouble Regulating Gearbox. The gearbox ouble Regulating feature allows the valve to be used to isolate and to be re-opened to its pre-set position. Installation The M925G can be used in conjunction with a flow measurement device M900 to regulate and measure flow. ill of Materials Part Material s ody uctile Iron STM ll isc luminium ronze ll Seat EPM ll Shaft Stainless Steel STM 532 Type 416 ll Taper Pin Stainless Steel STM 276 Type 316 ll Key arbon Steel ll O Ring Nitrile (una) ll Pressure/temperature ratings Temperature º -10 to 100 Pressure (bar) 16.0 Shaft ushing PTFE or ronze ll F G H oefficients* N Flow Kv Headloss K * Fully open position 13

16 Gearbox Operated Flow Measurement and Regulating Valve M950G PN16 Specification The M950G comprises M925G coupled to a fixed orifice flow measurement device using a spool piece connector, forming a fixed orifice flow measurement unit with regulation and isolation capability. Test points supplied loose. Installation The M950G is supplied ready assembled to site. Suitable gasket and bolting should be provided by the contractor/installer. ill of Materials Part Material s Extension piece Steel IN R.St.37.2/STM 53.Gr mm Extension piece Steel IN R.St mm P84 Test Valve See Fig No P84 ll Orifice Plate Retain Steel IN R.St ll Orifice Plate Stainless steel S S31 ll Orifice Plate Gasket sbestos free ll Flange olts Steel S3692 Gr. 8.8 ll M925G See Fig No M925G Gear Operated ll Test Point Extension ZR rass SEN12164 W602N ll Test Point daptor ZR rass SEN12164 W602N mm Socket Head ap Screw Steel S4168 Gr ll Pressure/temperature ratings Temperature º -10 to 100 Pressure (bar) F G H oefficients N Flow Kv Headloss K Kvs

17 Pressure Test Valve P82/ Extension Tube P83 / Pressure Test Points P84 Pressure Test Points P84 Threaded SEN10226 formerly S21 (ISO 7) P84 double seal insertion style pressure test points are fitted as standard to all rane flow measurement and regulation valves. Pressure Rating 0.032kg PN25 Max. Temp. 120 Part Material Specification ap ZR copper alloy SEN12164 W602N ap Washer EPM ody ZR copper alloy SEN12164 W602N Tie Polypropylene Seal EPM Retaining Ring ZR copper alloy SEN12164 W602N Extension Tube P83 Threaded SEN10226 formerly S21 (ISO 7) Part Material Specification P83 ZR copper alloy SEN12164 W602N P83 pressure test point extension tubes allow rane valves to be insulated to a thickness of 2" without the test points being covered. Pressure Test Valve P82 Threaded SEN10226 formerly S21 (ISO 7) Specification Pressure test valve P82 is suitable for use in LTHW and MTHW systems. conventional needle valve, operated by a standard radiator aircock key, is backed by a spring loaded self-sealing ball unit to provide double sealing. The double sealing facility offers maximum operational safety in accordance with the Health & Safety at Work legislation. It also makes it possible, with the valve closed to pipeline pressure, to clear the ball seat of any pipeline debris. lthough P82 is also suitable for use in HTHW systems it should not be operated while such a system is live. For live HTHW systems copper bleed tubes should be taken from the valves and terminated in needle valves, e.g. rane 71 or 72. The manometer connection on the valve accepts a Mechseal adaptor. When not in use a screw cap protects the connection from dust. Pressure Rating 0.07kg PN40 Materials Max. Temp. 182 Part Material Part Material ody ZR daptor ZR Stem ZR all Stainless Steel Shield rass Spring Stainless Steel O Ring Viton Viton rass 15

18 151 Gate Valve PN20 ronze Gate Valve rane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. The 151 carries the ritish Standards Institution kitemark - your assurance of exacting quality standards. In addition the 151 is WRS approved. ill of Materials Part Material s ody ronze SEN K ll onnet ZR rass SEN12165 W602N 1/4-2 onnet ronze SEN K 1/4-4 Stem ZR rass SEN12164 W602N 1/4-2 Stem rass SEN12164 W614N 2.1/2 & 3 Stem Manganese ronze 4 isc ronze SEN K ll Stuffing ox ZR rass SEN12164 W602N 1/4-2 Stuffing ox rass SEN12165 W617N 2.1/2 & 3 Stuffing box ronze SEN K 4 Packing sbestos Free ll Packing Gland rass SEN12164 W614N 1/4-3 Packing Gland ronze SEN K 4 Packing Nut rass SEN12164 W614N 1/4-3 Packing Nut ronze SEN K 4 Handwheel luminium 1/4-3 Handwheel Malleable Iron SEN1562 GJM I. Plate luminium ll Handwheel Nut rass SEN12164 W614N ll Gasket sbestos Free 3 & 4 1/4" /8" /2" /4" " /4" /2" " THREE SEN10226 FORMERLY S21 TPER OR NSI TPER 2.1/2" " " Pressure Rating: PN20 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator: Handwheel. Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Solid wedge disk, non-rising stem, screwed in bonnet. Valves are manufactured in accordance with S5154 PN20 series and are SI Kitemark approved. Valves having NSI threads generally conform to MSS SP-80. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 180º. vailable Options: P150 locking device. 16

19 237 Gate Valve (1/2" to 3") PN20 ronze Gate Valve with Lockshield rane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. The 237 carries the ritish Standards Institution Kitemark - your assurance of exacting quality standards. In addition the 237 is WRS approved. ill of Materials Part Material s ody ronze SEN1982 1/2-3 onnet ronze SEN1982 1/2-3 isc ronze SEN1982 1/2-3 Stem ZR rass SEN /2-3 Stuffing ox ZR rass SEN /2-3 Gland rass SEN /2-3 Packing sbestos Free 1/2-3 Lockshield rass SEN /2-3 ox Spanner Mild Steel 1/2-3 Tommy ar Mild Steel 1/2-3 1/2" /4" NOTE: LOKSHIEL KEY IS T. P103 THREE SEN10226 FORMERLY S21 TPER 1" /4" /2" " /2" " Pressure Rating: PN20 End onnection: SEN10226 formerly S21 Taper Operator: Lockshield Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Solid wedge disk, non-rising stem, screwed in bonnet. Valves are manufactured in accordance with S5154 PN20 series and are SI Kitemark approved. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 180º. vailable Options: P103 lockshield key 1/2" - 2" P100 lockshield key 2.1/2" - 3" 17

20 151 Gate Valve PN20 ZR Gate Valve rane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. ill of Materials Part Material s ody ZR rass SEN12165 W602N ll onnet ZR rass SEN12165 W602N ll Stem ZR rass SEN12164 W602N ll Packing Nut rass SEN12164 W712R ll Packing PTFE ll Stem ush ZR rass SEN12164 W602N ll isc ZR rass SEN12165 W602N ll Handwheel luminium ll Handwheel Nut Steel (Zinc Plated) ll I. 1/4" /8" /2" /4" " /4" /2" " /2" " Pressure Rating: PN20 End onnection: SEN10226 formerly S21 Taper Operator: Handwheel Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Valves are manufactured in accordance with S5154 PN20 for Series ratings. Non Rising Stem This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 180º. vailable Options: P150 locking device. 18

21 151X Gate Valve PN25 ronze Gate Valve rane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. ill of Materials Part Material s ody ronze SEN K ll onnet ZR rass SEN12164 W602N 1/4-2 onnet ronze SEN K 2.1/2 & 3 Stem ZR rass SEN12164 W602N ll isc ronze SEN K ll Stuffing ox ZR rass SEN12164 W602N 1/4-2 Stem ushing ZR rass SEN12164 W602N 2.1/2 & 3 only Packing sbestos Free ll Gland rass SEN12164 W614N ll Packing Nut rass SEN12164 W614N ll Handwheel luminium ll I. Plate luminium ll Handwheel Nut rass SEN12164 W614N ll Gasket sbestos Free 3 only I. 1/4" /8" /2" /4" " /4" /2" " /2" " Pressure Rating: PN25 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator: Handwheel Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Valves are manufactured in accordance with S5154 PN25 for series ratings. ll s SI Kitemarked. Non Rising Stem Valves with NSI threads also generally conform to MSS SP-80. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 186º. vailable Options: P150 locking device. 19

22 156 Gate Valve PN16 rass Gate Valve rane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. ill of Materials Part Material s ody rass SEN12165 W617N ll onnet rass SEN12165 W617N ll Stem rass SEN12164 W617N ll Packing Nut rass SEN12165 W617N ll Packing sbestos Free ll Stem ush rass SEN12164 W617N ll isc rass SEN12165 W617N ll Handwheel luminium ll Handwheel Nut Steel (Zinc Plated) ll I. 1/4" /8" /2" /4" " /4" /2" " /2" " " Pressure Rating: PN16 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator: Handwheel. Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Valves 1/4" to 2" are manufactured in accordance with S5154 PN16 for Series ratings. Non rising stem This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 170º. vailable Options: P150 locking device. 20

23 159 Gate Valve PN32 ronze Gate Valve rane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. ill of Materials Part Material s ody ronze SEN K ll onnet ronze SEN K 1/4-3 Stem ZR rass SEN12164 W602N 1/4-2 Stem ronze SEN K 2.1/2 & 3 isc ronze SEN K ll Stuffing ox ZR rass SEN12164 W602N 1/4-2 Stuffing ox ronze SEN K 2.1/2 & 3 Packing sbestos Free ll Gland rass SEN12164 W614N ll Packing Nut rass SEN12164 W614N ll Handwheel luminium ll I. Plate luminium ll Handwheel Nut rass SEN12164 W614N ll Gasket sbestos Free 3 only THREE SEN10226 FORMERLY S21 TPER OR NSI TPER 1/4" /8" /2" /4" " /4" /2" " /2" " Pressure Rating: PN32 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator: Handwheel Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Valves are manufactured in accordance with S5154 PN32 for series ratings. Non Rising Stem Valves having NSI threads also generally conform to MSS SP-80. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 198º. vailable Options: P150 locking device. 21

24 166 Gate Valve PN32 ronze Gate Valve rane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. ill of Materials Part Material s ody ronze SEN K ll onnet ronze SEN K ll Stem ronze SEN K 1/4-2 Stem luminium ronze NES 834 Pt.2 2.1/2 Stem Manganese ronze 3 isc ronze SEN K ll Packing sbestos Free ll Gland rass SEN12164 W614N ll Packing Nut rass SEN12164 W614N 1/4-2 Packing Nut ronze SEN K 2.1/2 & 3 Handwheel luminium ll I. Plate luminium ll Handwheel Nut rass SEN12164 W614N ll OPEN 1/4" /8" /2" /4" " /4" /2" " /2" " Pressure Rating: PN32 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator: Handwheel Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Valves are manufactured in accordance with S5154 PN32 for series ratings. Rising stem Valves having NSI threads also generally conform to MSS SP-80 This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 198º. vailable Options: P150 locking device. 22

25 180 Gate Valve PN32 ronze Gate Valve rane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. ill of Materials Part Material s ody ronze SEN K ll onnet ronze SEN K ll Stem ronze SEN K 1/4-2 Stem rass SEN12164 W721R 2.1/2 & 3 isc ronze SEN K ll Union Ring ronze SEN K 1/4-2 only Packing sbestos Free ll Gland rass SEN12164 W614N ll Packing Nut rass SEN12164 W614N 1/4-2 Packing Nut ronze SEN K 2.1/2 & 3 Handwheel luminium 1/4-2 Handwheel Malleable Iron S EN 1562 GJM /2 & 3 I. Plate luminium ll Handwheel Nut rass SEN12164 W614N ll Stud Steel S M20 2.1/2 & 3 only Stud Nut Steel S4190 Gr.4 2.1/2 & 3 only Gasket sbestos Free 2.1/2 & 3 only 1/4" /8" /2" /4" " /4" /2" " /2" " Pressure Rating: PN32 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator: Handwheel Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Valves are manufactured in accordance with S5154 PN32 for series ratings. Rising Stem s 1/4" to 2" have a union bonnet; sizes 2.1/2" and 3" have a bolted bonnet. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 260º. vailable Options: P150 locking device. 23

26 M160 Gate Valve PN16 ronze Gate Valve rane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. ill of Materials Part Material s ody ronze SEN K ll onnet ronze SEN K ll isc ronze SEN K ll Stem ronze SEN K 2.1/2 & 3 Stem ZR rass SEN12164 W602N 3/4-2 Packing sbestos Free ll Gland rass SEN12164 W614N ll Packing Nut rass SEN12164 W614N ll Stuffing ox ZR rass SEN12164 W602N 1.1/4 & 1.1/ 2 Stuffing ox rass SEN12164 W614N 2 only Stuffing ox ronze SEN K 2.1/2 & 3 Stem ush luminium ronze NES 834 Pt.2 3/4 & 1 Handwheel Malleable Iron S EN 1562 GJM only Handwheel luminium 3/4-2.1/2 Handwheel Nut rass SEN12164 W614N ll I. Plate luminium ll Gasket sbestos Free 3 only I E E 20mm mm I FLNGE TO S 4504 PN16 32mm mm mm mm mm Pressure Rating: PN16 End onnection: Flanged S EN (formerly S4504) Operator: Handwheel Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Valves are manufactured in accordance with S5154 PN16 for Series ratings, having 'short' face to face dimensions. Non Rising Stem End flanges conform to S 4504 Section 3.3 with flat face and are normally supplied drilled. Note: Users attention is drawn to S 4504 Section 3.3, lause 8 regarding types of gaskets and mating flanges to be used with metric flanged valves. vailable Options: Flanges undrilled, P150 Locking device. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 170º. 24

27 FM52 Gate Valve PN6 ast Iron Gate Valve rane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important omplete with ronze trim Each valve is hydrostatically tested to S5150 Manufactured in accordance with S5150 ill of Materials Part Material s ody ast Iron SEN1561 GJL-250 ll onnet ast Iron SEN1561 GJL-250 ll onnet Gasket sbestos Free ll onnet olts/nuts Steel S4190 Gr.4.6/4.0 ll isc ast Iron SEN1561 GJL-250 ll Stem rass S2874 Z114 ll Stuffing ox ast Iron SEN1561 GJL-250 ll Gland ast Iron SEN1561 GJL-250 ll Gland olts Steel S4190 Gr.4.6 s Gland Studs Steel S4439 Gr.4.8 s Stuffing ox Gasket sbestos Free ll Packing sbestos Free ll Handwheel Malleable Iron S EN 1562 GJM ll Washer Steel ll ody Seat Ring ronze SEN K ll isc Stem Nut ronze SEN K ll isc Ring ronze SEN K ll Handwheel Nut Steel S4190 Gr.4 ll E I VIEW FROM RROW FOR SIZES 50 TO 150MM E F 50mm mm mm mm mm F I I 150mm mm mm mm Pressure Rating: PN6 UK End onnection: Flanged SEN Operator: Handwheel Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Wedge isk, Non-Rising Stem, Inside Screw and Yoke This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: - 10 to 150º. vailable Options: Flanges undrilled. 25

28 F53 Gate Valve lass 125 ast Iron Gate Valve rane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. ill of Materials Part Material s ody ast Iron SEN1561 GJL-250 ll onnet ast Iron SEN1561 GJL-250 ll onnet Gasket sbestos Free ll onnet olts/nuts Steel S4190 Gr.4.6/4.0 ll isc ast Iron SEN1561 GJL-250 ll Stem rass SEN12164 W721R ll Stuffing ox ast Iron SEN1561 GJL-250 ll Gland ast Iron SEN1561 GJL-250 ll Gland olts Steel S4190 Gr Gland Studs Steel S4439 Gr Stuffing ox Gasket sbestos Free ll Packing sbestos Free ll Handwheel Malleable Iron SEN1562 GJM ll Washer Steel ll ody Seat Ring ronze SEN K ll isc Stem Nut ronze SEN K ll isc Ring ronze SEN K ll Handwheel Nut Steel S4190 Gr.4 ll Stud/olt Nuts Steel S4190 Gr.4 ll H 50mm mm mm mm mm mm mm mm mm Pressure Rating: lass 125 US End onnection: NSI lass 125 Operator: Handwheel Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Valves are manufactured in accordance with S5150. End flanges conform to S1560 Section 3.2/NSI 16.1 lass 125 with flat face and are normally supplied drilled. Wedge disk, non-rising stem, inside screw, bronze trim. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 230º. vailable Options: Flanges undrilled P50 locking device 26

29 FM57 Gate Valve PN10 ast Iron Gate Valve rane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important omplete with ronze trim Each valve is hydrostatically tested to S5150 Manufactured in accordance with S5150 ill of Materials Part Material s ody ast Iron SEN1561 GJL-250 ll onnet ast Iron SEN1561 GJL-250 ll onnet Gasket sbestos Free ll onnet olts/nuts Steel S4190 Gr.4.6/4.0 ll isc ast Iron SEN1561 GJL-250 ll Stem rass S2874 Z114 ll Stuffing ox ast Iron SEN1561 GJL-250 ll Gland ast Iron SEN1561 GJL-250 ll Gland olts Steel S4190 Gr.4.6 s Gland Studs Steel S4439 Gr.4.8 s Stuffing ox Gasket sbestos Free ll Packing sbestos Free ll Handwheel Malleable Iron S EN 1562 GJM ll Washer Steel ll ody Seat Ring ronze SEN K ll isc Stem Nut ronze SEN K ll isc Ring ronze SEN K ll Handwheel Nut Steel S4190 Gr.4 ll E I VIEW FROM RROW FOR SIZES 50 TO 150MM E F 50mm mm mm mm mm F I I 150mm mm mm mm Pressure Rating: PN10 UK End onnection: Flanged SEN Operator: Handwheel Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Long face to face, Wedge isk, Non-rising stem. Valves are manufactured in accordance with S5150. End flanges conform to SEN section 3.2 table 10 with raised face and are normally supplied drilled. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: - 10 to 180º. vailable Options: Flanges undrilled, P50 locking device. 27

30 FM63 Gate Valve (50mm to 300mm) up to 100mm PN16 ast Iron Gate Valve rane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important Each valve is hydrostatically tested to S5150 The FM63 holds the ritish Standards Institution Kitemark (50-100mm). ill of Materials Part Material s ody ast Iron SEN1561 GJL-250 ll onnet ast Iron SEN1561 GJL-250 ll ody Seat Ring ronze SEN K ll isc ronze SEN K isc ast Iron SEN1561 GJL isc Ring ronze SEN K Stem Manganese ronze Stem rass STM Half Hard Gland Flange Malleable Iron S EN 1562 GJM ll Stuffing ox ast Iron SEN1561 GJL Gland Flange uctile ast Iron STM 536 Gr Gland ast Iron SEN1561 GJL Gaskets sbestos Free ll Packing sbestos Free ll Handwheel Malleable Iron S EN 1562 GJM ll E I E F 50mm mm PPROX. 80mm mm mm F I I 150mm mm mm mm Pressure Rating: PN16 UK End onnection: Flanged SEN Operator: Handwheel Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Wedge isk, Non-Rising Stem, Inside Screw, SI Kitemark approved. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: - 10 to 200º. vailable Options: Flanges undrilled, P50 locking device. 28

31 FM82 Gate Valve up to 100mm PN16 ast Iron Gate Valve rane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. The FM82 holds the ritish Standards Institution Kitemark (50-100mm). ill of Materials Part Material s ody ast Iron SEN1561 GJL-250 ll onnet ast Iron SEN1561 GJL-250 ll isc ast Iron SEN 1561 GJL isc ronze SEN K Stem rass Stem Manganese ronze SEN12164 W721R ody Seat Ring ronze SEN K ll isc Seat Ring ronze SEN K Yoke ast Iron SEN1561 GJL Yoke Hub olts/nuts Steel S4190 Gr.4.6/ Yoke Sleeve ronze SEN K Yoke Sleeve Manganese ronze STM Yoke Sleeve Nut uctile Iron STM Yoke Sleeve Nut Malleable Iron SEN1562 GR Gland Flange uctile Iron STM Gland Flange Malleable Iron SEN1562 GR Gland ast Iron SEN1561 GJL Gland Flange Malleable Iron SEN1562 GR Gland olts/nuts Steel S4190 Gr.4.0/ Gland olts/nuts Steel S3692 Gr.8.0/ Packing sbestos Free ll onnet Gland sbestos Free ll onnet olts/nuts Steel S4190 Gr.4.0/ onnet olts/nuts Steel S3692 Gr.8.0/ Handwheel Malleable Iron SEN 1562 GR ll G I. F I. E F G SIZES mm mm LOSE E OPEN 80mm mm mm mm I. 200mm mm mm Pressure Rating: PN16 UK End onnection: Flanged SEN Operator: Handwheel Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Valves are manufactured in accordance with S5150. End flanges conform to SEN section 3.2 Table 11 with raised face and are normally supplied drilled. ronze trim, rising stem, sizes 50mm to 100mm kitemarked. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: - 10 to 200º. vailable Options: Flanges undrilled, P50 locking device. 29

32 F84 Gate Valve lass 125 ast Iron Gate Valve rane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important Each valve is hydrostatically tested to S1560. ill of Materials Part Material s ody ast Iron SEN1561 GJL-250 ll onnet ast Iron SEN1561 GJL-250 ll isc ronze SEN K 2-4 isc ast Iron SEN1561 GJL Stem rass S EN W721R 2-4 Stem rass J1S - H3250 Gr ody Seat Ring ronze SEN K ll isc Ring ronze SEN K 5-12 Yoke ast Iron SEN1561 GJL Yoke Hub olts/nuts Steel S4190 Gr.4.6/ Yoke Pad olts/nuts Steel S4190 Gr.4.6/ Yokesleeve Manganese ronze STM Yokesleeve ronze SEN K 5-12 Yokesleeve Ret'g Nut Malleable Iron S EN 1562 GJM Yokesleeve Nut Malleable Iron S EN 1562 GJM Yokesleeve Nut uctile Iron STM Gland Malleable Iron S EN 1562 GJM Gland ast Iron SEN1561 GJL Gland Flange uctile Iron STM Gland olts/nuts Steel S3692 Gr.8.8/8 2-4 Gland olts/nuts Steel S4190 Gr.4.6/ Packing sbestos Free ll Gasket sbestos Free ll onnet olts/nuts Steel S3692 Gr.8.8/8 2-4 onnet olts/nuts Steel S4190 Gr.4.6/ Handwheel Malleable Iron S EN 1562 GJM ll Grease Lubricator Kingfisher Spin rive ll ody Plate luminium ll H H 2" /2" " Open 4" " " " " " Pressure Rating: lass 125 US End onnection: NSI Flanged Operator: Handwheel Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Valves meet the requirements of MSS.SP-70. End flanges conform to S1560 Section 3.2/NSI lass 125 with flat face and are normally supplied drilled. Wedge isk, Rising Stem, Outside Screw and Yoke. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature Operating Range: -10 to 230º vailable Options: Flanges Undrilled P50 Locking evice 30

33 F58 Gate Valve lass 125 ast Iron Gate Valve rane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. ill of Materials Part Material s ody ast Iron SEN1561 GJL-250 ll onnet ast Iron SEN1561 GJL-250 ll isc ast Iron SEN1561 GJL-250 ll Stem 13% r.steel S970 Pt.1 410S21 or 431S29 ll ody Seat Ring ronze SEN K ll isc Ring ronze SEN K ll Yokesleeve ronze SEN K ll Yokesleeve Nut uctile Iron STM , 3, 5, 8 & 10 Yokesleeve Nut ast Iron SEN1561 GJL /2, 4, 6 & 12 Yokesleeve Ret'g Nut uctile Iron STM , 3, & 5 Yokesleeve Ret'g Nut ast Iron SEN1561 GJL /2, 4, 6 & 12 isc Stem Nut ronze SEN K ll Gland ast Iron SEN1561 GJL-250 ll Gland olts/nuts Steel S4190 Gr.4.6/4.0 ll Packing sbestos Free ll Gasket sbestos Free ll onnet olts/nuts Steel S4190 Gr.4.6/4.0 ll Yoke ast Iron SEN1561 GJL-250 8, 10 & 12 Yoke Pad olts/nuts Steel S4190 Gr.4.6/4.0 8, 10 & 12 Yoke Hub olts/nuts Steel S4190 Gr.4.6/4.0 8 & 10 Handwheel Malleable Iron S EN 1562 GJM ll isc Stem Nut Pin Stainless Steel Type 304 ll Grease Lubricator Steel or rass ll ody Plate luminium ll rive Pin Steel ll E H 2" /2" " " " " " " " Pressure Rating: lass 125 US End onnection: NSI lass 125 Operator: Handwheel Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Valves are manufactured in accordance with S End flanges conform to S 1560 section 3.2/NSI 16.1 lass 125 with flat face and are normally supplied drilled. Wedge disk, Rising Stem, Outside Screw and Yoke This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 230º. vailable Options: Flanges undrilled P50 locking device 31

34 155 Gate Valve PN16 ompression Ended ronze Gate Valve rane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. (* ompression ends to suit SEN1057 copper tables x, y and z.) ill of Materials Part Material s ody ronze STM ll isc ronze STM ll Stem ronze STM or ll onnet ronze STM or ll Lock Nut rass STM ll Packing PTFE or PTFE/Neoprene ll Gland rass STM ll Packing Nut rass STM /STM ll I. Plate luminium ll Handwheel ast Iron ll Handwheel Nut Steel ll ompression Olive rass STM ll ompression Nut rass STM ll F 15mm mm mm F 35mm mm mm Pressure Rating: PN16 UK End onnection: ompression* Operator: Handwheel Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Valves are manufactured in accordance with S5154 PN20 for Series ratings, but are limited to the pressure/temperature ratings detailed in S864 for ompression end fittings. This valve is to be used on Group 2 liquids only, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 120º. vailable Options: P150 locking device. * ompression ends to suit SEN1057 copper tables x, y and z. 32

35 255 Gate Valve PN16 ompression Ended ronze Gate Valve with Lockshield rane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. (* ompression ends to suit S2871 copper tables x, y and z.) ill of Materials Part Material s ody ronze STM ll isc ronze STM ll Stem ronze STM or ll onnet ronze STM or ll Lock Nut rass STM ll Packing PTFE or PTFE/Neoprene ll Gland rass STM ll Lockshield rass STM /STM ll ompression Olive rass STM ll ompression Nut rass STM ll SQ ÿe E F 15mm mm mm mm mm ÿ 54mm F PIPE ENS IN ORNE WITH SEN 1254 PRT 2 Pressure Rating: PN16 UK End onnection: *ompression US End onnection: Not Specified Operator: Lockshield Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Valves are manufactured in accordance with S5154 PN20 for Series ratings, but are limited to the pressure/temperature ratings detailed in S864 for ompression end fittings. Non-rising stem. This valve is to be used on Group 2 liquids only, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 120º. vailable Options: P100 and P102 Lockshield Keys 33

36 237 Gate Valve PN20 Lockshield Operated ZR Gate Valve rane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. ill of Materials Part Material s ody ZR rass SEN12165 W602N ll onnet ZR rass SEN12165 W602N ll Stem ZR rass SEN12164 W602N ll Lockshield rass SEN12164 W721R ll Packing sbestos Free ll Stem ush ZR rass SEN12164 W602N ll isc ZR rass SEN12165 W602N ll 1/2" /4" " /4" /2" THREE TO SEN10226 formerly S 21 (ISO 7) TPER 2" Pressure Rating: PN16 UK End onnection: SEN10226 formerly S21 Taper Operator: Lockshield Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling. Valves are manufactured in accordance with S5154 PN20 for Series ratings. Non Rising Stem This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 180º. vailable Options: P100 & P102 Lockshield keys 34

37 4 Globe Valve PN20 ronze Globe Valve rane ronze globe valves are highly efficient for throttling because seat and disk designs provide flow characteristics with proportionate relationships between valve lift and flow rate. ill of Materials Part Material s ody ronze SEN K ll onnet ronze SEN K ll isc rass SEN12164 W614N 1/4-1.1/2 isc ronze SEN K 2 Stem rass SEN12164 W614N ll Packing sbestos Free ll Gland rass SEN12164 W614N ll Packing Nut rass SEN12164 W614N ll isc Stem Ring Mang.ronze SEN12164 W721R 2 only Handwheel luminium ll Handwheel Nut rass SEN12164 W614N ll I. Plate luminium ll 1/4" /8" /2" /4" " /4" /2" " Pressure Rating: PN20 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator: Handwheel Valves are manufactured in accordance with S5154 PN20 for Series ratings. esign incorporates a spherical shape disk spun on to the stem on sizes 1/4" to 1.1/2", and on size 2" retained by threaded ring. ody seat is integral and is a narrow contact angled type. s 1/4" to 2" SEN10226 formerly S21 versions SI Kitemarked. Metal disk, screwed bonnet This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 180º. vailable Options: P150 locking device. 35

38 14 Globe Valve PN32* ronze Globe Valve rane ronze globe valves are highly efficient for throttling because seat and disk designs provide flow characteristics with proportionate relationships between valve lift and flow rate. * s 2 1 / 2 & 3 rated PN25 ill of Materials Part Material s ody ronze SEN K ll onnet ronze SEN K ll isc Stem Ring rass S EN W721R ll isc ronze SEN K ll Stem rass S EN W721R 1/4-2 Stem Manganese ronze 2.1/2 & 3 Gland rass SEN12164 W614N ll Packing sbestos Free ll Packing Nut rass SEN12164 W614N 1/4-2.1/2 Packing Nut ronze SEN K 3 only Handwheel luminium 1/4-2.1/2 Handwheel Malleable Iron S EN 1562 GJM only Handwheel Nut rass SEN12164 W614N ll I. Plate luminium ll Gasket sbestos Free 2.1/2 only Gasket Stainless Steel 3 only 1/4" /8" /2" /4" " /4" /2" " /2" " Pressure Rating: PN32 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator: Handwheel Valves are manufactured in accordance with S5154 series, PN32 for sizes 1/4 to 2 and PN25 for sizes 2.1/2 and 3. esign incorporates a bronze 35 degree wide angle disk retained on stem by a threaded ring; body seat is integral of the narrow contact angled type. Valves having NSI threads also generally conform to MSS SP-80. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 260º. vailable Options: P150 locking device. 36

39 15 Globe Valve PN32* ronze Globe Valve The rane 15 ronze Globe Valve is highly efficient for throttling service. * s 2.1/2" and 3" are rated at PN25. ill of Materials Part Material s ody ronze SEN K ll onnet ronze SEN K ll isc Stem Ring rass S EN W721R ll isc PTFE (25% Glass Filled) ll isc Holder ronze SEN K 1.1/4-3 isc Holder rass SEN12165 W617N 1/4-1 isc Retaining Nut rass SEN12164 W614N 1/4-2 isc Retaining Nut ronze SEN K 2.1/2 & 3 Washer rass SEN12164 W614N 1/4-2 only Stem rass S EN W721R 1/4-2 Stem Manganese ronze 2.1/2 & 3 Gland rass SEN12164 W614N ll Packing sbestos Free ll Packing Nut rass SEN12164 W614N 1/4-2 Packing Nut ronze SEN K 2.1/2-3 Handwheel luminium 1/4-2.1/2 Handwheel Malleable Iron S EN 1562 GJM only Handwheel Nut rass SEN12164 W614N ll I. Plate luminium ll Gasket sbestos Free 2.1/2 only Gasket Stainless Steel 3 only 1/4" /8" /2" /4" " /4" /2" " /2" " Pressure Rating: PN32 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator: Handwheel Valves are manufactured in accordance with S5154 series, PN32 for sizes 1/4" to 2" and PN25 for sizes 2.1/2" and 3" s 1/4" to 3" S21 versions SI Kitemarked. esign incorporates a disk holder retained on stem by a threaded ring; body seat is integral of the semi-crown type. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 198º. vailable Options: P150 locking device. 37

40 16 Globe Valve PN32* ronze Globe Valve rane ronze globe valves are highly efficient for throttling because seat and disk designs provide flow characteristics with proportionate relationships between valve lift and flow rate. * Please note s 2.1/2" and 3" are rated at PN25 ill of Materials Part Material s ody ronze SEN K ll onnet ronze SEN K ll ody Seat Ring 13% r.steel S970 Pt.1 410S21 or 431S29 ll isc Stem Ring rass S EN W721R ll isc 13% r.steel S970 Pt.1 410S21 or 431S29 1/2-2 isc Nickel lloy 1/4,3/8,2.1/2 & 3 Stem rass S EN W721R 1/4-2 Stem Manganese ronze 2.1/2 & 3 Gland rass SEN12164 W614N ll Packing sbestos Free ll Packing Nut rass SEN12164 W614N 1/4-2.1/2 Packing Nut ronze SEN K 3 only Handwheel luminium 1/4-2.1/2 Handwheel Malleable Iron S EN 1562 GJM only Handwheel Nut rass SEN12164 W614N ll I. Plate luminium ll Gasket sbestos Free 2.1/2 only Gasket Stainless Steel 3 only 1/4" /8" /2" /4" " /4" /2" " /2" " Pressure Rating: PN32 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator: Handwheel Valves are manufactured in accordance with S 5154 Series, PN32 for sizes 1/4" to 2" and PN25 for sizes 2.1/2" and 3". esign incorporates a nickel alloy plug type disk retained on the stem by a threaded ring; body seat is a screwed-in stainless steel ring. Valves having NSI threads also generally conform to MSS SP-80. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 260º. vailable Options: P150 locking device. 38

41 FM369 Globe Valve PN16 ast Iron Globe Valve rane cast iron globe valves are highly efficient for throttling because seat and disk designs provide flow characteristics with proportionate relationships between valve lift and flow rate. ill of Materials Part Material s ody ast Iron SEN1561 GJL-250 ll onnet ast Iron SEN1561 GJL-250 ll isc Guide Pin rass SEN12164 W721R 125 & 300 Gland rass SEN12164 W614N ll Gland Flange Malleable Iron S EN 1562 GJM ll Gland olts Steel S3692 Gr.8.8 ll Gasket sbestos Free ll isc Stem Ring rass SEN12164 W721R ll Lockwasher rass SEN1652 ll isc ronze SEN K ll ody Seat Ring ronze SEN K ll Stem rass SEN12164 W721R ll Packing sbestos Free ll onnet olts Steel S3692 Gr.8.8 ll Yoke ushing rass SEN12164 W721R ll Handwheel Malleable Iron S EN 1562 GJM ll Handwheel Nut Steel S1768 ll E F G 50mm mm mm mm mm mm Pressure Rating: PN16 UK End onnection: Flanged SEN Operator: Handwheel Valves are manufactured in accordance with S5152. End flanges conform to SEN Section 3.2 Table 11 with raised face. Valves are normally supplied drilled. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: - 10 to 220º. vailable Options: Flanges Undrilled P50 locking device. 39

42 F372 Globe Valve lass 125 ast Iron Globe Valve rane cast iron globe valves are highly efficient for throttling because seat and disk designs provide flow characteristics with proportionate relationships between valve lift and flow rate. ill of Materials Part Material s ody ast Iron SEN1561 GJL-250 ll onnet ast Iron SEN1561 GJL-250 ll isc Guide Pin rass SEN12164 W721R 5 & 6 Gland rass SEN12164 W614N ll Gland Flange Malleable Iron S EN 1562 GJM ll Gland olts Steel S3692 Gr.8.8 ll Gland olts Nuts Steel S3692 Gr.8 ll Gasket sbestos Free ll isc Stem Ring rass SEN12164 W721R ll Lockwasher rass SEN1652 ll isc ronze SEN K ll ody Seat Ring ronze SEN K ll Stem rass SEN12164 W721R ll Packing sbestos Free ll onnet olts Steel S3692 Gr.8.8 ll onnet olts Nuts Steel S3692 Gr.8 ll Yoke ushing rass SEN12164 W721R ll Handwheel Malleable Iron S EN 1562 GJM ll Handwheel Nut Steel S1768 ll E F 2" /2" " " " " Pressure Rating: lass 125 US End onnection: NSI lass 125 Operator: Handwheel Valves are manufactured in accordance with S5152 and also meet the requirements of MSS.SP-85. End flanges conform to S1560 Section 3.2/NSI 16.1 lass 125 with Flat Face and are normally supplied drilled. Valves detailed on this page are dimensioned in metric terms. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 230º. vailable Options: Flanges undrilled. P50 Locking evice 40

43 138 heck Valve PN25 ronze Swing heck Valve heck valves permit flow in one direction only, and close automatically if flow reverses. They are entirely automatic in action, depending upon pressure and velocity of flow within the line to perform their functions of opening and closing. The rane 138 ronze check valve is of the swing variety. This valve carries the ritish Standards Institution kitemark - your assurance of exacting quality. ill of Materials Part Material s ody ronze SEN K ll ap ronze SEN K ll isc ronze SEN K 1.1/4-3 isc rass SEN12164 W614N 3/8-1 Hinge ronze SEN K ll Hinge Pin Stainless Steel STM 182 Gr.F /2 & 3 Hinge Pin Stainless Steel 3/8-2 Hinge Nut rass SEN W614N ll I. Plate luminium ll rive Pin Steel - Electro rassed ll Hinge Pin Plug rass SEN W614N 2.1/2 & 3 3/8" /2" /4" " /4" /2" " /2" " Pressure Rating: PN25 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator: Swing Type heck Valve Metal isk, Screwed in ap, SI Kitemark pproved. Valves are manufactured in accordance with S5154, PN25 for Series ratings. isk is flat accurately ground and connected to hinge by a spud and nut, but us free to rotate. The hinge is mounted on a hinge pin which permits free rotation in internal lugs (sizes 3/8" to 2") or body bosses (sizes 2.1/2" and 3"). There are no external plugs on sizes 3/8" to 2". ody seat is integral. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 186º. 41

44 140 ronze heck Valve PN25 ronze Swing heck Valve heck valves permit flow in one direction only, and close automatically if flow reverses. They are entirely automatic in action, depending upon pressure and velocity of flow within the line to perform their functions of opening and closing. The rane 140 ronze check valve is of the swing variety. This valve carries the ritish Standards Institution kitemark - your assurance of exacting quality standards. ill of Materials Part Material s ody ronze SEN K ll ap ronze SEN K ll isc Holder ronze SEN K 1.1/4-3 isc Holder rass SEN12164 W614N 1/2-1 isc Nitrile Rubber ll isc Retaining Nut rass SEN12164 W614N 1/2-2.1/2 isc Retaining Nut ronze SEN K 3 only Washer rass S2874 Z121 1/2-2.1/2 Hinge ronze SEN K ll Hinge Pin Stainless Steel 1/2-2 Hinge Pin rass SEN12164 W614N 2.1/2 & 3 Hinge Pin Plug rass SEN12164 W614N 2.1/2 & 3 Hinge Nut rass SEN12164 W614N ll I.. Plate luminium ll rive Pin Steel-electro brassed ll 1/2" /4" " THREE TO SEN10226 formerly S21 (ISO 7) TPER. OR NSI TPER 1.1/4" /2" " /2" " Pressure Rating: PN25 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator: Swing Type heck Valve Valves are manufactured in accordance with S 5154 PN25 for Series ratings but are limited to 100 degrees celsius maximum temperature. The rubber disk is fitted to a disk holder which is connected to the hinge by a spud and nut, but is free to rotate. The hinge is mounted on a hinge pin which permits free rotation in internal lugs (sizes 1/2" to 2") or body bosses (sizes 2.1/2" and 3"). There are no external plugs on sizes 1/2" to 2". ody seat is integral. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 100º. 42

45 FM492 heck Valve PN16 ast Iron heck Valve heck valves permit flow in one direction only, and close automatically if flow reverses. They are entirely automatic in action, depending upon pressure and velocity of flow within the line to perform their functions of opening and closing. Swing pattern, metal faced disk. ill of Materials Part Material s ody ast Iron SEN1561 GJL-250 ll ap ast Iron SEN1561 GJL-250 ll isc ast Iron SEN1561 GJL-250 ll ody Seat Ring ronze SEN K ll isc Ring ronze SEN K ll Hinge Pin ush ronze SEN K ll Hinge Pin Plug ronze SEN K ll Hinge Pin 13% r.steel ISI Type mm - 300mm Hinge Pin Stainless Steel Type mm - 100mm ap olts Steel S3692 Gr.8.8 ll ap olt Nuts Steel S3692 Gr.8 ll Gasket sbestos Free ll ody Plate luminium ll X X E E 50mm mm NOM SIZE SETION X-X FLNGE S4504 PN16 / SEN mm mm mm mm mm mm mm Pressure Rating: PN16 UK End onnection: Flanged SEN Operator: Swing check valve Valves are manufactured in accordance with SEN1234 End flanges conform to SEN Section 3.2 Table 11 with raised face and are normally supplied drilled. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 220º. 43

46 F493 heck Valve lass 125 ast Iron heck Valve The F493 is of the swing variety, complete with a ronze trim. Each valve is hydrostatically tested to S 5153 ill of Materials Part Material s ody ast Iron SEN1561 GJL-250 ll ap ast Iron SEN1561 GJL-250 ll isc ast Iron SEN1561 GJL-250 ll ody Seat Ring ronze SEN K ll isc Ring ronze SEN K ll Hinge Pin ush ronze SEN K ll Hinge Pin Plug ronze SEN K ll Hinge Pin Stainless Steel Type Hinge Pin 13% r.steel ISI Type ap olts Steel S3692 Gr.8.8 ll ap olts Nuts Steel S3692 Gr.8 ll Gasket sbestos Free ll ody Plate luminium ll 2" /2" " " " " " " " Pressure Rating: lass 125 US End onnection: NSI lass 125 Operator: Swing heck Valve Valves are manufactured in accordance with S5153 and also meet the requirements of MSS.SP-71. End flanges conform to S1560 Section 3.2/NSI 16.1 lass 125 with flat face and are normally supplied drilled. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 232º. 44

47 FM469 heck Valve PN16 ast Iron heck Valve heck valves permit flow in one direction only, and close automatically if flow reverses. They are entirely automatic in action, depending upon pressure and velocity of flow within the line to perform their functions of opening and closing. Swing pattern, bronze trim, resilient seated. ill of Materials Part Material s ody ast Iron SEN1561 GJL-250 ll ap ast Iron SEN1561 GJL-250 ll isc ast Iron SEN1561 GJL-250 ll ody Seat Ring ronze SEN K ll isc Ring Nitrile Rubber ll Hinge Pin ush ronze SEN K ll Hinge Pin Plug ronze SEN K ll Hinge Pin 13% r.steel ISI Type Hinge Pin Stainless Steel Type ap olts Steel S3692 Gr.8.8 ll ap olt Nuts Steel S3692 Gr.8 ll Gasket sbestos Free ll ody Plate luminium ll isc Ring Ret'g Nut ast Iron SEN1561 GJL-250 ll Retaining Nut Pin Steel ll E X X E 50mm mm NOM SIZE SETION X-X 80mm mm mm FLNGE S4504 PN10 / SEN mm mm mm mm Pressure Rating: PN16 UK End onnection: Flanged SEN Operator: Swing check valve Valves are manufactured in accordance with SEN1234. End flanges conform to SEN Section 3.2 Table 11 with raised face and are normally supplied drilled. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 65º. 45

48 FM450 Wafer heck Valve PN16 ast Iron Wafer heck Valve heck valves permit flow in one direction only, and close automatically if flow reverses. They are entirely automatic in action, depending upon pressure and velocity of flow within the line to perform their functions of opening and closing. Swing Pattern, Metal Faced isk ill of Materials Part Material s ody ast Iron SEN1561 GJL-250 ll isc SG ast Iron S isc Ring ronze SEN K isc ronze SEN K Hinge Stainless Steel Type 304 ll Hinge Pin Stainless Steel Type 304 ll Spacer PTFE (Glass Filled) ll Spring Stainless Steel Type 304 or 316 ll Plug ronze SEN K ll Hinge Nut Stainless Steel Type 304 ll Eye olt Steel (Zinc Plated) ody Seat Ring ronze SEN K ll 50mm mm mm mm mm mm mm mm mm Pressure Rating: PN16 Installation Instructions: Wafer check valves must be correctly aligned to achieve efficient valve operation with minimum headloss, and to prevent the valve disk fouling downstream piping. With some flange/valve combinations the pipe flange bolting fits closely around the valve body, automatically centralising the valve in the pipeline. However, in a number of cases there is too much clearance between the flange bolting and the valve body to obtain correct alignment without careful manual positioning. To overcome this problem, RNE has developed a unique system of colour coded centralised sleeves. set of centralising sleeves is supplied with every valve together with easy to follow instructions. The sleeves have varying outside diameters/bore to suit the different flange/valve combinations. When fitting to horizontal pipelines the sleeves are placed over bolts in the lower half of the flanges to cradle the valve during installation and prior to bolt tightening. In vertical pipelines the sleeves are fitted to bolts evenly spaced around the valve body to ensure the valve is positioned centrally in the pipeline. UK End onnection: PN10 & PN16 SEN , TLE or E S10 US End onnection: S 1560, NSI 16-1, NSI 16-5 Operator: Swing type check. One piece flangeless cast iron body. Suitable for use between flanges drilled in accordance with SEN PN10 and PN16, S10 Table or E and NSI 125 Face to Face dimensions conform to ISO Suitable for installation in vertical and horizontal pipelines. When installed in vertical pipelines the flow must be in an upward direction. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 230º. 46

49 FM451 Wafer heck Valve PN16 ast Iron Wafer heck Valve heck valves permit flow in one direction only, and close automatically if flow reverses. They are entirely automatic in action, depending upon pressure and velocity of flow within the line to perform their functions of opening and closing. Swing Pattern, Resilient Seated ill of Materials Part Material s ody ast Iron SEN1561 GJL-250 ll isc SG ast Iron S isc Ring ronze SEN K isc ronze SEN K Hinge Stainless Steel Type 304 ll Hinge Pin Stainless Steel Type 304 ll Spacer PTFE (Glass Filled) ll Spring Stainless Steel Type 304 or 316 ll Plug ronze SEN K ll Hinge Nut Stainless Steel Type 304 ll Eye olt Steel (Zinc Plated) ody Seat Ring Ethylene Propylene iene Monomer ll 50mm mm mm mm mm mm mm mm mm Pressure Rating: PN16 Installation Instructions: Wafer check valves must be correctly aligned to achieve efficient valve operation with minimum headloss, and to prevent the valve disk fouling downstream piping.with some flange/valve combinations the pipe flange bolting fits closely around the valve body, automatically centralising the valve in the pipeline. However, in a number of cases there is too much clearance between the flange bolting and the valve body to obtain correct alignment without careful manual positioning. To overcome this problem, RNE has developed a unique system of colour coded centralised sleeves. set of centralising sleeves is supplied with every valve together with easy to follow instructions. The sleeves have varying outside diameters/bore to suit the different flange/valve combinations. When fitting to horizontal pipelines the sleeves are placed over bolts in the lower half of the flanges to cradle the valve during installation and prior to bolt tightening. In vertical pipelines the sleeves are fitted to bolts evenly spaced around the valve body to ensure the valve is positioned centrally in the pipeline. UK End onnection: PN10 & PN16 SEN , TLE or E S10 US End onnection: S 1560, NSI 16-1, NSI 16-5 Operator: Swing Pattern heck One piece flangeless cast iron body. Suitable for use between flanges drilled in accordance with SEN PN10 and PN16, S10 Table or E and NSI 125 Face to Face dimensions conform to ISO Suitable for installation in vertical and horizontal pipelines. When installed in vertical pipelines the flow must be in an upward direction. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 80º. 47

50 171 / 171EXS all Valve 171 PN25 ronze all Valve 171EXS PN25 Extended Stem ronze all Valve rane 171 all Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the 171 and 171EXS are WRS approved. ill of Materials Part Material s ody ronze SEN K ll Seat Retainer ronze SEN K ll all ZR rass SEN12165 W602N ll Seat Ring PTFE ll Stem ZR rass SEN12164 W602N ll 171 Packing PTFE ll Gland Nut rass SEN12164 W617N ll Lever Mild Steel ( Zinc Plated) ll Screw Mild Steel ( Zinc Plated) ll Lever over P.V.. ll Extension Housing luminium 171EXS Extension Stem rass SEN12164 W614N 171EXS 171EXS 1 171EXS 1/4" /8" /2" /4" ORE SREWE SEN10226 formerly S21 TPER OR NSI TPER 1" /4" /2" " /2" " Pressure Rating: PN25 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator: Lever. End Entry, Quarter Turn, Tight Shut-Off PTFE seats and stem seal, WRS listed. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 186º. 48

51 171T / 171LS all Valve 171T PN25 T-Handle ronze all Valve 171LS PN25 Lockshield ronze all Valve rane 171 all Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the 171T and 171LS are WRS approved. ill of Materials Part Material s ody ronze SEN K ll Seat Retainer ronze SEN K ll all ZR rass SEN12165 W602N ll Seats PTFE ll Stem ZR rass SEN12164 W602N ll Packing PTFE ll Gland Nut rass SEN12164 W617N ll 'T' Handle luminium 171T 171T Screw Steel (Zinc Plated) 171T Lockshield ap rass SEN12164 W617N 171LS Screw Mild Steel 171LS Lockshield over Nylon 6 171LS 1 171LS LS 1 171LS 3/8" /2" /4" " /4" /2" " Pressure Rating: PN25 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator: T-Handle / llen key End Entry, Quarter Turn, Tight Shut-Off PTFE seats and stem seal, WRS listed. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 186º. 49

52 171MHU / 171MHULS all Valve 171MHU PN25 ronze raw-off Valve 171MHULS PN25 ronze raw-off all Valve with Lockshield rane 171 all Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the 171MHU and 171MHULS are WRS approved. ill of Materials Part Material s ody ronze SEN K ll Seat Retainer ZR rass SEN12165 W602N ll all ZR rass SEN12165 W602N-hrome Plated ll Seat PTFE ll Stem ZR rass SEN12164 W602N ll Packing PTFE ll Gland Nut rass SEN12164 W614N ll Lever Mild Steel (Zinc Plated) 171MHU Lever Screw Mild Steel (Zinc Plated) 171MHU 171MHU Lever over PV 171MHU Hose onnector rass SEN12165 W617N ll Hose Union Nut rass SEN12165 W617N ll Washer PTFE ll Lockshield ap rass SEN12164 W617N 171MHULS Lockshield over Nylon 6 171MHULS 1 171MHULS 1 ORE 1 171MHULS 1 171MHULS 1/2" /4" " Pressure Rating: PN25 UK End onnection: SEN10226 formerly S21Taper/Hose union US End onnection: Not Specified Operator: Lever / llen key End Entry, Quarter Turn, Tight Shut-Off PTFE seats and stem seal, WRS listed. Male x hose union outlet This valve is not suitable for use on Group 1 gasses and unstable fluids as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 180º. 50

53 171 / 171EXS all Valve 171 PN16 ompression Ended ronze all Valve 171EXS PN16 ompression Ended ronze all Valve with Extension Stem rane 171 all Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the 171 and 171EXS are WRS approved. ill of Materials Part Material s ody ronze SEN K ll Seat Retainer ronze SEN K ll all ZR rass SEN12165 W602N ll Seat Ring PTFE ll Stem ZR rass SEN12164 W602N ll Packing PTFE ll Gland Nut rass SEN12164 W617N ll 171 Lever Mild Steel (Zinc Plated) 171 Screw Mild Steel (Zinc Plated) 171 Lever over P.V ompression Sleeve ZR rass SEN12164 W602N ll ompression Nut ZR rass SEN12165 W602N ll Extension Housing luminium 171EXS Extension Stem rass SEN EXS 171EXS EXS 15mm mm mm mm mm mm Pressure Rating: PN16 UK End onnection: S EN 1254 Part 2 Operator: Lever End Entry, Quarter Turn, Tight Shut-Off PTFE seats and stem seal, WRS listed. This valve is intended Group 2 liquids only, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 120º. 51

54 171T / 171LS all Valve 171T PN16 ompression Ended T-Handle all Valve 171LS PN16 ompression Ended Lockshield all Valve rane 171 all Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the 171T and 171LS are WRS approved. ill of Materials Part Material s ody ronze SEN K ll Seat Retainer ZR rass SEN12165 W602N 15mm - 28mm Seat Retainer ronze SEN K 35mm - 54mm all ZR rass SEN12165 W602N ll Seat PTFE ll Stem ZR rass SEN12164 W602N ll Packing PTFE ll Gland Nut rass SEN12164 W617N ll 171T 'T' Handle luminium 171T Screw Steel (Zinc Plated) 171T ompression Olive ZR rass SEN12164 W602N ll ompression Nut ZR rass SEN12165 W602N ll Lockshield rass S LS Lockshield over Nylon 6 171LS 1 171LS LS 1 171LS 15mm (MIN. HNTIGHT ONITION) 22mm mm Pressure Rating: PN16 UK End onnection: S EN 1254 Part 2 Operator: T-Handle / llen Key End Entry, Quarter Turn, Tight Shut-Off This valve is intended for Group 2 liquids as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 120º. 52

55 171 / 171EXS all Valve 171 PN25 ZR all Valve 171EXS PN25 Extended Stem ZR all Valve rane 171 all Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the 171 and 171EXS are WRS approved. ill of Materials Part Material s ody ZR rass SEN12165 W602N ll Seat Retainer ZR rass SEN12165 W602N ll all ZR rass SEN12165 W602N ll Seat PTFE ll Stem ZR rass SEN12164 W602N ll Packing PTFE ll Gland Nut ZR rass SEN12164 W602N ll 171 Lever Mild Steel (Zinc Plated) ll Lever Screw Steel (Zinc Plated) ll Lever over PV ll Extension Housing luminium 171EXS Extension Stem rass SEN EXS 171EXS 1 171EXS 1/4" /8" /2" ORE SREWE SEN10226 formerly S 21 TPER 3/4" " /4" /2" " Pressure Rating: PN25 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator Lever. End Entry, Quarter Turn, Tight Shut-Off PTFE seats and stem seal, WRS listed. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 186º. 53

56 171T / 171LS all Valve 171T PN25 ZR T-Handle all Valve 171LS PN25 ZR Lockshield all Valve rane 171 all Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the 171T and 171LS are WRS approved. ill of Materials Part Material s ody ZR rass SEN12165 W602N ll Seat Retainer ZR rass SEN12165 W602N ll all ZR rass SEN12165 W602N ll Seat PTFE ll Stem ZR rass SEN12164 W602N ll Packing PTFE ll Gland Nut rass SEN W617N ll T Handle luminium 171T Screw Steel (Zinc Plated) 171T 171T Lockshield rass SEN LS Lockshield over Nylon 6 171LS 1 171LS 1 171LS 1 171LS 1 1/4" /8" ORE 1/2" /4" " SREWE SEN10226 formerly S 21 TPER 1.1/4" /2" " Pressure Rating: PN25 UK End onnection: SEN10226 formerly S21 Taper US End onnection: Not Specified Operator: T-Handle / llen key Entry, Quarter Turn, Tight Shut-Off PTFE seats and stem seal. WRS listed. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 186º. 54

57 171 / 171EXS all Valve 171 PN16 ZR ompression Ended all Valve 171EXS PN16 ZR ompression Ended all Valve with Extended Stem rane 171 all Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the 171 and 171EXS are WRS approved. ill of Materials Part Material s ody ZR rass SEN12165 W602N ll Seat Retainer ZR rass SEN12165 W602N ll all ZR rass SEN12165 W602N ll Seat PTFE ll Stem ZR rass SEN12164 W602N ll Packing PTFE ll 171 Gland Nut rass SEN W617N ll Lever Steel (Zinc Plated) ll Screw Steel (Zinc Plated) ll Lever over PV ll ompression Sleeve rass SEN W508L ll ompression Nut rass SEN W617N ll Extension Housing luminium 171EXS Extension Stem rass SEN EXS 171EXS EXS 15mm ORE 22mm mm mm (MIN. HNTIGHT ONITION) 42mm mm Pressure Rating: PN16 UK End onnection: S EN 1254 Part 2 Operator: Lever. End Entry, Quarter Turn, Tight Shut-Off PTFE seats and stem seal, WRS listed. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 186º. 55

58 171T / 171LS all Valve 171T PN16 ZR ompression Ended T-Handle all Valve 171LS PN16 ZR ompression Ended Lockshield all Valve rane 171 all Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the 171T and 171LS are WRS approved. ill of Materials Part Material s ody ZR rass SEN12165 W602N ll Seat Retainer ZR rass SEN12165 W602N ll all ZR rass SEN12165 W602N ll Seat PTFE ll Stem ZR rass SEN12164 W602N ll Packing PTFE ll Gland Nut rass SEN W617N ll T Handle luminium 171T 171T Screw Steel (Zinc Plated) 171T ompression Sleeve rass SEN W508L ll ompression Nut rass SEN W617N ll Lockshield rass SEN LS Lockshield over Nylon 6 171LS 1 171LS LS 1 171LS ORE 15mm mm mm mm (MIN. HNTIGHT ONITION) 42mm mm Pressure Rating: PN16 UK End onnection: S E 1254 Part 2 US End onnection: Not specified Operator: T-Handle / llen key End Entry, Quarter Turn, Tight Shut-Off PTFE seats and stem seal, WRS listed. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 186º. 56

59 191 / 191EXS all Valve 191 PN25 rass all Valve 191EXS PN25 rass all Valve with Extension stem rane 191 all valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. s 1/4" to 2" have the added advantage of ritish Gas pproval. ill of Materials Part Material s ody rass S EN W617N(Nickel Plated) ll Seat Retainer rass S EN W617N(Nickel Plated) ll all rass S EN 1982 W617N(hrome Plated) ll Seat PTFE ll Stem rass S EN W617N ll Packing PTFE ll Gland Nut rass S EN W617N ll 191 Lever Mild Steel ll Lever Screw Steel ll Lever over PV ll Extension Housing luminium 191EXS Extension Stem rass SEN12164 W617N 191EXS 191EXS 1 PPROX EXS 1/4" /8" /2" ORE 3/4" " /4" /2" " /2" Pressure Rating: PN25 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator: Lever. End Entry, Quarter Turn, Tight Shut-Off PTFE seats and stem seal 3" 4" Not suitable for use on unstable fluids as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 186º. 57

60 191T / 191LS all Valve 191T PN25 T-Handle rass all Valve 191LS PN25 rass Lockshield all Valve rane 191T all valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. s 1/4" to 2" have the added advantage of ritish Gas pproval. ill of Materials Part Material s ody rass S EN W617N(Nickel Plated) ll Seat Retainer rass S EN W617N(Nickel Plated) ll all rass S EN W617N(hrome Plated) ll Seats PTFE ll Stem rass S EN W617N ll Packing PTFE ll Gland Nut rass S EN W617N ll 'T' Handle luminium 191T 191T Screw Steel 191T Lockshield rass S EN W617N 191LS Lockshield over Nylon 6 191LS 1 191LS 1 191LS 1 191LS 1 1/4" /8" ORE 1/2" /4" " /4" /2" " Pressure Rating: PN25 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Operator: T-Handle / llen key End Entry, Quarter Turn, Tight Shut-Off PTFE seats and stem seal Not suitable for use on unstable fluids as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 186º. 58

61 F611 GEM utterfly Valve PN16 Semi Lugged utterfly Valve to SEN593 Key Features: luminium ronze disc, Nitrile liner Stainless steel shaft -10 to 82º Lockable trigger lever Valves are suitable for use with flanges conforming to SEN PN10 or PN16 and NSI 16.1 lass 125 ill of Materials Part ody isc Liner Material uctile Iron STM 536 (Epoxy Paint) luminium ronze Nitrile Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 316 Key O Ring ushing Lever & Screw Stop Plate arbon Steel una-n PTFE arbon Steel (Epoxy Paint) arbon Steel (Zn Plated) E F G 50mm mm mm mm mm mm mm Pressure Rating: PN16 / NSI lass 125 End onnection: Semi Lugged Operator: Lockable trigger lever Suitable for group 1 and 2 gases and group 1 and 2 liquids as defined by the Pressure Equipment irective 97/23/E. Temperature Operating Range: -10 to 82º Valves are designed in accordance with SEN593 (supersedes S5155). 59

62 F612 GEM utterfly Valve PN16 Semi Lugged utterfly Valve to SEN593 Key Features: luminium ronze disc, Nitrile liner Stainless steel shaft -10 to 82º Gearbox operated Valves are suitable for use with flanges conforming to SEN PN10 or PN16 and NSI 16.1 lass 125 (sizes 2 to 12 ) s 350mm to 600mm PN16 only ill of Materials Part ody isc Liner Material uctile Iron STM 536 (Epoxy Paint) luminium ronze Nitrile Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 316 Key O Ring ushing arbon Steel una-n PTFE E F G K 50mm mm mm mm mm mm mm mm mm mm mm * mm * mm * Pressure Rating: PN16 / NSI lass 125 End onnection: Semi-Lugged Operator: Gearbox 600mm * Suitable for group 1 and 2 gases and group 1 and 2 liquids as defined by the Pressure Equipment irective 97/23/E. Temperature Operating Range: -10 to 82º Valves are designed in accordance with SEN593 (supersedes S5155). 60

63 F614 GEM utterfly Valve PN16 Fully Lugged utterfly Valve to SEN593 Key Features: luminium ronze disc, Nitrile liner Stainless steel shaft -10 to 82º Lockable trigger lever Valves are suitable for use with flanges conforming to SEN PN10 or PN16 ill of Materials Part ody isc Liner Material uctile Iron STM 536 (Epoxy Paint) luminium ronze Nitrile Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 316 Key O Ring ushing Lever & Screw Stop Plate arbon Steel una-n PTFE arbon Steel (Epoxy Paint) arbon Steel (Zn Plated) E F G 50mm mm mm mm mm mm mm Pressure Rating: PN16 End onnection: Lugged Operator: Lockable trigger lever Suitable for group 1 and 2 gases and group 1 and 2 liquids as defined by the Pressure Equipment irective 97/23/E. Temperature Operating Range: -10 to 82º Valves are designed in accordance with SEN593 (supersedes S5155). 61

64 F615 GEM utterfly Valve PN16 Fully Lugged utterfly Valve to SEN593 Key Features: luminium ronze disc, Nitrile liner Stainless steel shaft -10 to 82º Gearbox operated Valves are suitable for use with flanges conforming to SEN PN10 or PN mm mm PN16 only ill of Materials Part ody isc Liner Material uctile Iron STM 536 (Epoxy Paint) luminium ronze EPM Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 316 Key O Ring ushing arbon Steel una-n PTFE E F G K 50mm mm mm mm mm mm mm mm mm mm mm * mm * mm * mm * Pressure Rating: PN16 End onnection: Lugged Operator: Gearbox Suitable for group 1 and 2 gases and group 1 and 2 liquids as defined by the Pressure Equipment irective 97/23/E. Temperature Operating Range: -10 to 82º Valves are designed in accordance with SEN593 (supersedes S5155). 62

65 F621 GEM utterfly Valve PN16 Semi Lugged utterfly Valve to SEN593 Key Features: luminium ronze disc, EPM liner Stainless steel shaft Temperature -10 to 100º Lockable trigger lever Valves are suitable for use with flanges conforming to SEN PN10 or PN16 and NSI 16.1 lass 125 ill of Materials Part ody isc Liner Material uctile Iron STM 536 (Epoxy Paint) luminium ronze EPM - WRS Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 316 Key O Ring ushing Lever & Screw Stop Plate arbon Steel una-n PTFE arbon Steel (Epoxy Paint) arbon Steel (Zn Plated) E F G 50mm mm mm mm mm mm mm Pressure Rating: PN16 / NSI lass 125 End onnection: Semi-Lugged Operator: Lockable trigger lever This valve is intended for group 2 liquids only, as defined by the Pressure Equipment irective 97/23/E. Temperature Operating Range: -10 to 100º Valves are designed in accordance with SEN593 (supersedes S5155). Valves are WRS approved, suitable for drinking water applications. 63

66 F622 GEM utterfly Valve PN16 Semi Lugged utterfly Valve to SEN593 Key Features: luminium ronze disc, EPM liner Stainless steel shaft Temperature -10 to 100º Gearbox operated Valves are suitable for use with flanges conforming to SEN PN10 or PN16 and NSI 16.1 lass 125 (sizes 2 to 12 ) s 350mm to 600mm PN16 only ill of Materials Part ody isc Liner Material uctile Iron STM 536 (Epoxy Paint) luminium ronze EPM - WRS Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 316 Key O Ring ushing arbon Steel una-n PTFE E F G K 50mm mm mm mm mm mm mm mm mm mm mm * mm * mm * mm * Pressure Rating: PN16 / NSI lass 125 (up to 12 only) End onnection: Semi-Lugged Operator: Gearbox This valve is intended for group 2 liquids only, as defined by the Pressure Equipment irective 97/23/E. Temperature Operating Range: -10 to 100º Valves are designed in accordance with SEN593 (supersedes S5155). Valves are WRS approved, suitable for drinking water applications. 64

67 F624 GEM utterfly Valve PN16 Fully Lugged utterfly Valve to SEN593 Key Features: luminium ronze disc, EPM liner Stainless steel shaft Temperature -10 to 100º Lockable trigger lever Valves are suitable for use with flanges conforming to SEN PN10 or PN16 ill of Materials Part ody isc Liner Material uctile Iron STM 536 (Epoxy Paint) luminium ronze EPM - WRS Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 316 Key O Ring ushing Lever & Screw Stop Plate arbon Steel una-n PTFE arbon Steel (Epoxy Paint) arbon Steel (Zn Plated) E F G 50mm mm mm mm mm mm mm Pressure Rating: PN16 End onnection: Lugged Operator: Lockable trigger lever This valve is intended for group 2 liquids only, as defined by the Pressure Equipment irective 97/23/E. Temperature Operating Range: -10 to 100º Valves are designed in accordance with SEN593 (supersedes S5155). Valves are WRS approved, suitable for drinking water applications. 65

68 F625 GEM utterfly Valve PN16 Fully Lugged utterfly Valve to SEN593 Key Features: luminium ronze disc, EPM liner Stainless steel shaft Temperature -10 to 100º Gearbox operated Valves are suitable for use with flanges conforming to SEN PN10 or PN mm mm PN16 only. ill of Materials Part ody isc Liner Material uctile Iron STM 536 (Epoxy Paint) luminium ronze EPM - WRS Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 316 Key O Ring ushing arbon Steel una-n PTFE E F G K 50mm mm mm mm mm mm mm mm mm mm mm * mm * mm * mm * Pressure Rating: PN16 End onnection: Lugged Operator: Gearbox This valve is intended for group 2 liquids only, as defined by the Pressure Equipment irective 97/23/E. Temperature Operating Range: -10 to 100º Valves are designed in accordance with SEN593 (supersedes S5155). Valves are WRS approved, suitable for drinking water applications. 66

69 F626 GEM utterfly Valve PN16 Semi Lugged utterfly Valve to SEN593 Key Features: luminium ronze disc, EPM liner Stainless steel shaft High temperature -10 to 130º Lockable trigger lever Valves are suitable for use with flanges conforming to SEN PN10 or PN16 and NSI 16.1 lass 125 ill of Materials Part ody isc Liner Material uctile Iron STM 536 (Epoxy Paint) luminium ronze EPM Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 316 Key O Ring ushing Lever & Screw Stop Plate arbon Steel una-n PTFE arbon Steel (Epoxy Paint) arbon Steel (Zn Plated) E F G 50mm mm mm mm mm mm mm Pressure Rating: PN16 / NSI lass 125 End onnection: Semi-Lugged Operator: Lockable trigger lever This valve is intended for group 2 liquids only, as defined by the Pressure Equipment irective 97/23/E. Temperature Operating Range: -10 to 130º Valves are designed in accordance with SEN593 (supersedes S5155). 67

70 F627 GEM utterfly Valve PN16 Semi Lugged utterfly Valve to SEN593 Key Features: luminium ronze disc, EPM liner Stainless steel shaft High temperature -10 to 130º Gearbox operated Valves are suitable for use with flanges conforming to SEN PN10 or PN16 and NSI 16.1 lass 125 (sizes 2 to 12 ) s 350mm to 600mm PN16 only ill of Materials Part ody isc Liner Material uctile Iron STM 536 (Epoxy Paint) luminium ronze EPM Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 316 Key O Ring ushing arbon Steel una-n PTFE E F G K 50mm mm mm mm mm mm mm mm mm mm mm * mm * mm * mm * Pressure Rating: PN16 / NSI lass 125 End onnection: Semi-Lugged Operator: Gearbox This valve is intended for group 2 liquids only, as defined by the Pressure Equipment irective 97/23/E. Temperature Operating Range: -10 to 130º Valves are designed in accordance with SEN593 (supersedes S5155). 68

71 F628 GEM utterfly Valve PN16 Fully Lugged utterfly Valve to SEN593 Key Features: luminium ronze disc, EPM liner Stainless steel shaft High temperature -10 to 130º Lockable trigger lever Valves are suitable for use with flanges conforming to SEN PN10 or PN16 ill of Materials Part ody isc Liner Material uctile Iron STM 536 (Epoxy Paint) luminium ronze EPM Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 316 Key O Ring ushing Lever & Screw Stop Plate arbon Steel una-n PTFE arbon Steel (Epoxy Paint) arbon Steel (Zn Plated) E F G 50mm mm mm mm mm mm mm Pressure Rating: PN16 End onnection: Lugged Operator: Lockable trigger lever This valve is intended for group 2 liquids only, as defined by the Pressure Equipment irective 97/23/E. Temperature Operating Range: -10 to 130º Valves are designed in accordance with SEN593 (supersedes S5155). 69

72 F629 GEM utterfly Valve PN16 Fully Lugged utterfly Valve to SEN593 Key Features: luminium ronze disc, EPM liner Stainless steel shaft High temperature -10 to 130º Gearbox operated Valves are suitable for use with flanges conforming to SEN PN10 or PN mm mm PN16 only. ill of Materials Part ody isc Liner Material uctile Iron STM 536 (Epoxy Paint) luminium ronze EPM Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 316 Key O Ring ushing arbon Steel una-n PTFE E F G K 50mm mm mm mm mm mm mm mm mm mm mm * mm * mm * mm * Pressure Rating: PN16 End onnection: Lugged Operator: Gearbox This valve is intended for group 2 liquids only, as defined by the Pressure Equipment irective 97/23/E. Temperature Operating Range: -10 to 130º Valves are designed in accordance with SEN593 (supersedes S5155). 70

73 297 Strainer PN32 ronze Strainer Scale and dirt in piping systems cause endless trouble and frequently serious damage to pipeline equipment. Installation of rane strainers will help eliminate the problems caused by foreign matter within piping systems. The rane 297 features: Perforated stainless steel screen, Robust design, Low flow resistance, High Quality Materials WRS pproval ill of Materials Part Material s ody ronze SEN K ll ap ronze SEN K ll Gasket sbestos Free (WRS) ll I. Plate luminium ll Pin Steel - Electro rassed ll Screen Stainless Steel Type 304 ll /F HEX E THREE SEN10226 formerly S 21 (ISO 7) TPER OR NSI TPER WITHRWL ISTNE E PPROX. 1/2" /4" " /4" OPTIONL SP TPPING 1.1/2" " Pressure Rating: PN32 UK End onnection: SEN10226 formerly S21 Taper US End onnection: NSI Strainers fitted with stainless steel perforated strainer element having 0.75mm diameter holes. Screens fitted into rane Strainers conform to the high standards of materials and workmanship associated with all rane products. This strainer is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 200º. 71

74 298 Strainer PN16 ronze Y Type Strainer ill of Materials Part ap Screen ody Material rass SEN12420 W617N Stainless Steel SEN S15 Gunmetal SEN K Pressure Temperature Ratings Maximum working temperature: 170º Minimum working temperature: -10º Temperature º -10 to Pressure (bar) Test Pressure: 24 bar hydraulic =withdrawal distance for the screen 1/2" /4" " /4" /2" " Pressure Rating: PN16 UK End onnection: Threaded to SEN10226 formerly S21 (ISO 7-1) US End onnection: NSI ronze body. 304 stainless steel 40 mesh screen. Temperature operating range: -10 to 170º. 72

75 FM276 Strainer PN16 ast Iron Strainer Scale and dirt in piping systems cause endless trouble and frequently serious damage to pipeline equipment. Installation of rane strainers will help eliminate the problems caused by foreign matter within piping systems. The FM276 offers the integrity of manufacture, quality and reliability which are the hallmarks of all rane products. ill of Materials Part Material s ody ast Iron SEN1561 GJL-250 ll ap (screwed) ast Iron SEN 1561 EN-GJL ap (bolted) Steel S / Gasket sbestos Free ll Stud Steel S 4439 GRE Nut Steel STM 182 F Screen Stainless Steel ISI Type 304 ll Plug Malleable Iron ll Plug Rc 1/4 Malleable Iron ll E PRESSURE TPPINGS 1/4 Rc (SP TPER) E F G 50mm Ø 65mm mm mm H RIN PLUG SP TPER F G NO MINL WITHRWL ISTNE 125mm mm mm mm mm mm mm mm Pressure Rating: PN16 UK End onnection: Flanged SEN End flanges conform to SEN Section 3.2 table 11 with raised face and are normally supplied drilled. Strainers are normally supplied with a stainless steel perforated strainer element having 1.5mm diameter holes. This product is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: - 10 to 200º. osses drilled, tapped and plugged. 73

76 F277 Strainer lass 125 ast Iron Strainer Scale and dirt in piping systems cause endless trouble and frequently serious damage to pipeline equipment. Installation of rane strainers will help eliminate the problems caused by foreign matter within piping systems. Stainless Steel strainer element, screwed in cap or bolted cap. ill of Materials Part Material s ody ast Iron SEN1561 GJL-250 ll ap (screwed) uctile Iron S3468 S Ni r only ap (bolted) Steel bs / /2-12 Gasket sbestos Free ll ap Studs Steel S4439 Gr.8.8 (admium Plated) 2.1/2-12 ap Studs Nuts Steel S3692 Gr.8 (admium Plated) 2.1/2-12 Screen Stainless Steel Type 304 ll E E F G 2" PRESSURE TPPINGS 1/4 Rc (SP TPER) 2 1 /2" Ø 3" " " H RIN PLUG SP TPER F G NO MINL WITHRWL ISTNE 6" " " " Pressure Rating: lass 125 US End onnection: NSI lass 125 End flanges conform to S Section 3.2/NSI 16.1 with flat face and are normally supplied drilled. This strainer is supplied with a stainless steel perforated element having 1.5mm diameter holes. This product is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment irective 97/23/E. Temperature operating range: -10 to 230º. 74

77 Typical Kv values Typical Kv values for various valves to enable Pressure rop calculations to be made. For other pipe specifications, valve sizes and valve types, please refer to rane Fluid Systems. GTE VLVES (Schedule 40 Pipe) SIZE Kv GLOE VLVES (Schedule 40 Pipe) SIZE Kv UTTERFLY VLVES SIZE Kv LL VLVES SIZE Kv HEK VLVES (Schedule 40 Pipe) SIZE Kv STRINERS (Flanged) (S1387 Medium Grade Steel Pipe) SIZE Kv STRINERS (Threaded) (S1387 Medium Grade Steel Pipe) SIZE Kv OMMISSIONING VLVES: (Fixed Orifice ouble Regulating Valve - rane M941) SIZE Kv OMMISSIONING VLVES: (Fixed Orifice ouble Regulating Valve - rane 931) SIZE Kv Please do not hesitate to contact us if you require further information, Technical Helpline Tel: +44 (0)

78 is the home of the rane Fluid Systems Internet Site. Here users will find a valuable information source on rane and all of its products. The site is split into 6 sections providing general information on rane plus full technical data on the entire product range. It also provides a one-stop source of information on valves and their applications, as well as publishing technical papers on issues affecting the industry. Technical advice on the range of rane products is only an away via the ask the expert facility within the contacts section. home The Home Page provides access to the news section of the site, as well as product features which focus on recently introduced rane products. map of how to find us is also available as well as a site map for easy navigation around the many areas of the site. about Information on rane is available in this section including the vision statement, company history, casting services and information on career opportunities with rane. e-catalogue Information on the complete range of rane valves and fittings resides in this area of the site. Users can view and print database generated product catalogue pages for all products within the rane range. In addition, photos and dimensional drawings can be downloaded by the user for printing. eing on-line, the catalogue is always up to date; the latest information on all current rane products is just a few clicks away. The rane Product Profile can be ordered from this section. istributors rane products are sold exclusively through a comprehensive network of distributors and agents. Use the search facility to find your nearest distributor of rane valves and fittings anywhere in the world. e-store Here you can purchase your copy of the world renowned rane publication Flow of Fluids securely. downloads lick to download the latest rane valve selection software, allowing fast and efficient selection of all rane balancing products. Visit 76