ANAUM INTERNATIONAL ELECTRONICS LLC. Test and Measurement Calibration Services Test Bench.
|
|
- Laurel Peters
- 6 years ago
- Views:
Transcription
1 ANAUM INTERNATIONAL ELECTRONICS LLC Test and Measurement Calibration Services Test Bench
2 About Us Located in the Musaffah, Abu Dhabi, United Arab Emirates, Anaum International Electronics (ISO and ISO 14001:2004 Certified Company), sells Test & Measuring Products from industry leading suppliers such as Additel, Extech, FLIR, Fluke, MadgeTech, Meriam, Kestrel, Rigol, Scarlet, Siglent Novotest and many more. The company's goal to supply test equipment that provides high quality and years of service. Anaum seeks out vendors and products that meet stringent performance and quality standards.
3 Our Partners
4 Pressure Pump and Calibrator Pressure Controller Hydraulic Pressure Pump Process Calibrator Pressure Gauge Pressure Calibrator Pneumatic Pressure Pump
5 Test & Measuring Instruments Multimeter Borescope Light Meter Sound Meter Vibration Meter Thermometer Water Quality Meter Anemometer Data logger
6 Thermal Imaging Cameras & Testers FLIR TG165 Spot Thermal Camera FLIR T-Series Infrared Cameras with MSX FLIR Ex-Series FLIR T1K HD Thermal Imaging Camera FLIR Exx-Series FLIR Test & Measurement Instruments
7 Pressure and Temperature Gauges Pressure Gauge Thermometer Thermometer
8 Oscilloscope / Waveform Generator / DC Power Supply Digital Multimeter Digital Oscilloscope Function Generator DC Power Supply
9 Non Destructive Testing Equipment Hardness Tester Ultrasonic Thickness Tester
10 Test & Measuring Instruments Digital Multimeter Humidity Meter Digital Clampmeter IR Thermometer Digital Thermometer Earth Tester Process Calibrator Insulation Tester
11 Test & Measuring Instruments Digital Multimeter AC DC Clampmeter Earth Resistance Tester Humidity Temp Datalogger Multifunction Calibrator Insulation Resistance Tester
12 Decade Resistance / Capacitance / Inductance Box RCL Meter Fixed Resistance Standard Decade Capacitance Box RTD Simulator Decade Resistance Box Decade Inductance Box
13 Temperature / Humidity / Pressure / Vibration Datalogger Temperature Datalogger Temp/Humidity/Pressure Datalogger Vibration Datalogger Temperature Datalogger
14 Process Calibrators & Manometers Process Calibrator Digital Manometer Thermometers HART Communicator Flow Meter Hydraulic Handpump Manometer
15 Environmental Meters Wind Meter Weather Meter Heat stress Meter Airflow Meter
16 Oscilloscope / Waveform Generator / DC Power Supply Oscilloscope Portable Oscilloscope Oscilloscope DC Power Supply Function /Arbitrary Waveform Generator Spectrum Analyzer
17 Environmental Safety Meter Heat Stress Meter Wireless Anemometer Data Logger Class 1 Sound Level Meter
18 CALIBRATION TEST BENCHES Working environments for people with ideas
19 CALIBRATION SERVICES
20 Calibration Capabilities Electrical & Electronics Digital Multimeter Process Calibrator Oscilloscope Earth Resistance Tester Insulation Resistance Tester RCD Tester Decade Resistance Box Decade Capacitance Box Low Resistance Ohmmeter High Voltage Tester Function Generator Signal Generator DC Power Supply 1ɸ Energy Meter Power Analyzer Tachometer Relay Tester Timer / Counter Pressure Pressure Gauge Digital Pressure Gauge Manometer Differential Pressure Gauge Pressure Transmitter Pressure Chart Recorder Vacuum Gauge Pressure Calibrator Barometer Pressure Relief Valve Temperature & Humidity Digital Thermometer Humidity Meter Thermo-Hygrometer Dataloggers Temp. Humidity Chart Recorders Temperature Calibrator Temperature Gauge Temperature Transmitter Humidity Transmitter Dimension Vernier Caliper Dial Gauge Micrometer Inside Micrometer Height Gauge Feeler Gauge Ultrasonic Thickness Gauge Steel Rule Other Torque Wrench Torque Screw Driver Sound Level Meter Light Meter Lux Meter Vibration Meter Airflow Meter Weighing Balance Multi Gas Detector ph Meter
21 TRAININGS COMPLETE PRINCIPAL PRODUCT TRAININGS INFRARED THERMOGRAPHY BASIC CALIBRATION TRAINING OTHERS IN-HOUSE ONLINE
22 CONTACT US Anaum International Electronics LLC P.O.Box ICAD-1, Musaffah M41 Abu Dhabi, United Arab Emirates sales@anaum.ae Tel: Google Map Visit us on:
Welcome to Garber C O R P O R AT E O V E R V I E W
CORPORATE OVERVIEW Garber Metrology is one of the only companies in the Mid-Atlantic Region that combines full service weighing solutions, a wide range of calibration /metrology services and a broad scope
More informationTEST AND CALIBRATION SERVICES Ensuring quality and reliability.
> TEST AND CALIBRATION SERVICES Ensuring quality and reliability www.thalesgroup.com.au TEST AND CALIBRATION SERVICES ENSURING QUALITY AND RELIABILITY Introduction Thales Australia s Test and Calibration
More informationWe are engaged in manufacturing, supplying and trading Testing & Measuring Instruments (Electrical, Control & Instrumentation) Work Benches,
We are engaged in manufacturing, supplying and trading Testing & Measuring Instruments (Electrical, Control & Instrumentation) Work Benches, Temperature, Pressure & Marine Calibrator Kit, Thermal Imagers
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that SP Metrology System Thailand Co., LTD 88/115
More informationRTD CALIBRATOR Mode KM-CAL-720
An IS 9001:2008 Company RTD CALIBRATR Mode KM-CAL-720 SPECIAL FEATURES : Sources and measures 7 RTD types devices (PT10, PT50, PT100, PT200, PT500, PT1000 (385), PT100 (JIS)) or High accuracy maximum up
More informationAmruta Electronics Corporation
+91-8048603192 Amruta Electronics Corporation https://www.indiamart.com/amruta-electronics/ Our organization is known in the market for importing and trading an advanced range of Ultrasonic Detector &
More informationTHERMOCOUPLE CALIBRATOR Mode KM-CAL-710
An ISO 9001:2008 Company THERMOCOUPLE CALIBRATOR Mode KM-CAL-710 Thermocouple Process Calibrator is a exactitude measurement and source handhold instrument, it can be use to calibrate the Thermocouple
More informationRESALE PRODUCT LISTING JUNE 1, 2013
Pantone 123 Yello Pantone 534 Blue RESALE PRODUCT LISTING JUNE 1, 2013 Pantone 534 Blue - 100/80/30/5 Pantone 485 Red - 10/100/100/5 Pantone 123 Yellow - 0/27/100/ INDEX PAGE...2-7 ANALOG PRESSURE GAUGES...7
More informationScope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX Gavin Lewis
Scope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX 77060 Gavin Lewis 832-428-2737 In recognition of a successful assessment to ISO/IEC 17025:2005
More informationEMPOWERING PRECISION WITH ACCURATE SOLUTIONS
INSTRUMENTATION CALIBRATION ENGINEERING www.calconuae.com EMPOWERING PRECISION WITH ACCURATE SOLUTIONS CITY ANCHOR Group Understanding: Striving to become one of the best solution providers, supplier and
More informationPROMPT ENGINEERING P.O. BOX BARWA VILLAGE, WAKRA, BUILDING NO. 6 SHOP NO. 19 AND 20 DOHA QATAR
This is to attest that PROMPT ENGINEERING P.O. BOX 24067 BARWA VILLAGE, WAKRA, BUILDING NO. 6 SHOP NO. 19 AND 20 DOHA QATAR Calibration Laboratory CL-165 has met the requirements of AC204, IAS Accreditation
More information+91-8048600379 Rampura Tools http://www.rampuratools.in/ We are one of the leading distributor, suppliers and traders of Measuring Instrument. Owing to their accurate measurement, sturdy construction,
More informationOPERATION MANUAL MILLIAMP PROCESS CLAMPMETER MODEL - KM 071 LIST OF PRODUCTS
LIST OF PRODUCTS * Digital Multimeter * Digital AC & AC/DC Clampmeter * AC Clamp Adaptor * AC/DC Current Adaptor * Thermo Anemometer * Thermo Hygrometer * Distance Meter * Digital Lux Meter * Network Cable
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0393 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I. DIMENSION 1. Vernier Caliper (Digital/ Dial/ Scale) $ L.C.: 0.01 mm 0 to 150 mm 7.7 µm Using Caliper Checker 0 to 200 mm 8.1 µm 0 to 300 mm 9.3 µm 0 to 600 mm 13.9 µm 2.
More informationClass 100 temperature and humidity dataloggers
Temperature Humidity Light Voltage Current Class 100 temperature and humidity dataloggers Storage capacity : 12,000 measurement points With or without 1-line display Temperature - KT 100 1 internal sensor
More information4-20mA DC PROCESS CLAMP METER
An ISO 9001:2008 Company The KM 071 Milliamp Process Clamp Meter is a Hand-held battery operated clamp meter that measures 4-20 ma DC without breaking the electrical circuit. Unlike conventional clamp
More informationDIGITAL EARTH RESISTANCE Model KM 2030
An ISO 9001:2008 Company GENERAL SPECIFICATIONS : DIGITAL EARTH RESISTANCE Model KM 2030 Display : 3½ Digit LCD display. Ground resistance measurements from 0 ~ 01Ω to 2000Ω with 0.01Ω resolution. Earth
More information+91-8048718949 Bearing & Tools Centre http://www.measuringtestinginstrument.com/ We are a renowned dealer and supplier of a wide assortment of precision engineered testing and measuring equipment. Our
More informationinstrumentation test and measurement
Cable & Core Identifiers 3 3 3 HV De-energised 3 phase 3 3 LV 3 Phase and Single Phase 3 3 LV Live Phasing Identification HV and LV 3 3 Cable Fault Location (Underground) 3 3 3 3 3 3 3 3 Cable Sniffer
More informationRev /07/2015 CATALOGUE - CALIBRATION SERVICES 1
Rev. 02 07/07/2015 CATALOGUE - CALIBRATION SERVICES 1 OVER 100 ITEMS We are proud to present to you our new catalogue for 2015. In the following pages we present more than 100 instrument types, which we
More informationHVAC Measuring Instruments
HVAC Measuring Instruments Export general catalogue 2013/2014 Pressure / Temperature e / Humidity / Air velocity / Airflow / Air quality / Gas analysis / Sound level 02 Gas analysis - Pressure - Temperature
More informationCalitron Calibration Laboratory, U1: 207, Kohinoor Arcade, Tilak Chowk, Nigdi, Pune, Maharashtra
Last Amended on 12.09.2014 Page 1 of 7 I. MASS 1. Weights $ (Conventional Mass) 1 mg 0.015 mg Using Weights of 2 mg 0.015 mg accuracy Class F1 and 5 mg 0.015 mg 10 mg 0.015 mg 20 mg 0.020 mg 50 mg 0.020
More informationHi-Tech Calibration, 307, 3rd Floor, Govinda Complex, Char Rasta, Vapi, Gujarat. Discipline Mechanical Calibration Issue Date
Last Amended on 18.01.2016 Page 1 of 7 I. DIMENSIONS 1. CALIPER $ (Vernier, Dial, Electronics) L.C.0.01 mm up to 1000mm 24 µm Using Caliper Checker / L.C.0.02 mm up to 600mm 19 µm Length Bars /Slip Gauges
More information+91-8071801918 Powercon Electro Device & Systems http://www.powerconelectrodevicesystems.com/ We are one of the renowned distributor and supplier of wide range of Electronic and Electrical Components &
More informationTEMPERATURE MEASURING GALVANIC SEPARATORS CONVERTORS, PRESSURE MEASURING
DELIVERY PROGRAMME TEMPERATURE MEASURING CONVERTORS, GALVANIC SEPARATORS PRESSURE MEASURING - Resistance temperature sensors into a reservoir, - with a reservoir, with protection tube, with cable - Resistance
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ALDINGER COMPANY 1440 Prudential Drive Dallas, TX 75235 Timothy R. Detten Phone: 214 638 1808 CALIBRATION Valid To: July 31, 2018 Certificate
More informationDeal in All Kind Of Process Control Instrument & All Type Of Measuring Instrument Calibration Precision Instrument as per Drg.
Smartech Inc. HOUSE OF TESTING & MEASURING INSTRUMENTS F-109, Sundram Complex, Near Vadsar Bridge To Darbar Chowkdi, Opp.Ambe School, Makarpura, Vadodara 10, PH: 2631121, 9825439692 * Calibration for Pressure
More informationInstrumentation Catalog
Instrumentation Catalog 1.866.285.5550 www.catrents.ca INSTRUMENTS Current Meters... 3 Earth Ground/Resistance... 3 Fault Locator... 4 Insulation Testers/HIPOT... 4 Network... 6 Power Quality Analyzer......
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 RIVERVIEW CALIBRATION SERVICES, LTD 5706 Veto Road Belpre, OH 45714 J. Michael Pennell Phone: 740 678 8625 CALIBRATION Valid To: July
More information+91-8048078717 Japsin Instrumentation http://www.temperature-pressure-gauges.com/ We are an ISO 9001:2015 certified organization engaged in manufacturing & exporting of Testing & Measurement Instruments.
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0208 Valid Until Last Amended on
Last Amended on 12.08.2016 Page 1 of 7 I. DIMENSION (Basic Measuring, Gauge etc.) 1. CALIPER $ (Vernier / Dial / Digital) L.C.: 10 µm ф L.C.: 50 µm ф Upto 600mm 13 m Using Gauge Block Set Grade 0 (Carbide);
More informationAccurate Labs, 311, 312 Govinda Complex, GIDC Char Rasta, Vapi, Valsad, Gujarat. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 9 I. DIMENSION 1. CALIPER $ Vernier L.C. 0.01mm 7.5 µm 9.0 µm Using Caliper Checker & Slip Gauges L.C. 0.05mm 29.5 µm 30.0 µm Dial / Electronic L.C. 0.02mm 12.5 µm 13.5 µm 2.
More informationSchedule. 200 C to 400 C. 400 C to 660 C C to 800 C C to 1300 C C to 1200 C. 0 C to 1700 C. 0 C to 1700 C.
Page: 1 of 9 LABORATORY LOCATION: (PERMANENT LABORATORY) PPCALIBRATION SERVICES SDN. BHD. NO. 15, MEDAN BUKIT EMAS PUSAT PERNIAGAAN BUKIT EMAS 14000 BUKIT MERTAJAM, PULAU PINANG MALAYSIA This laboratory
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0752 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I DIMENSION 1. Caliper $ (Vernier/Dial/Digital) LC : 0.01mm 0 to 600 mm 0 to 1000 mm 12.2 µm 13.3 µm Using Caliper Checker, Slip Gauge Block & 2. Depth Caliper $ (Vernier/Dial/Digital)
More informationTransducers & Sensors.
Trilon Technology Measurement Systems www.trilontechnology.com Precision Non-contact Thickness Sound & Vibration meters Analysers & Noise Viewer Non Destructive Testing Hardness Measuring Systems Thermal
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Garber Metrology Weighing Solutions & Precision
More informationA.A. Calibration Pvt. Ltd., 13-C/18, Vasundhara Haat, Vasundhara, Ghaziabad, Uttar Pradesh. Discipline Mechanical Calibration Issue Date
Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1. VERNIER CALIPER $ L.C. 0.01mm 0 to 300 mm 0 to 600 mm 0 to 1000 mm 8 µm 14 µm 16 µm, Slip Gauge Accessories, Gauge Block L.C. 0.02 mm 0 to 1500 mm
More informationAlcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
More informationInside Front cover White
TUBE FAN Inside Front cover White INDEX INTRODUCTION PERFORMANCE GRAPHS TECHNICAL DATA DIMENSIONS pages - 3 - ACOUSTIC DATA - SOUND PRESSURE LEVEL ELECTRICAL DETAILS 3 4 Index back side white Introduction
More informationList of major equipment in Electrical Enginerring Department Labs
High Voltage Lab (84.10sq.m) 1 150 KV Power Transformer with accessories 2 550 KV Impulse generator with accessories 3 1-Ph. ¼ HP 1425 rpm Motor 4 Surge Potentiometer 400 pfd 550KV 5 Impulse Surge Oscilloscope
More informationQA Tech (A Division of GMP Technical Solutions Pvt. Ltd.), L-73, Verna Industrial Estate, Verna Salcette, Goa
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10µm Φ 0 to 300 mm 13 µm Using Caliper Checker; & T.C. Gauge Block Set by Comparison L.C. :- 20µm 0 to 1000 mm 22 µm Using Caliper Checker;
More informationELECTRICAL ENGINEERING DEPARTMENT LIST OF EQUIPMENT IN EEM LAB
ELECTRICAL ENGINEERING DEPARTMENT LIST OF EQUIPMENT IN EEM LAB SL.NO. NAME OF THE INSTRUMENT SPECIFICATION 1. 3 Auto Transformer 415/415-470,15amp,15.P.3 2. 3 Resistive Load Box 1A 4,.5 2 3. Measurement
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationTEMPERATURE CALIBRATOR Model KM-CAL-801
An IS 9001:2008 Company TEMPERATURE CALIBRATR Model KM-CAL-801 This Calibrator is a source for Volts, hms RTD & Thermocouples. It gives output of Volts in 2 ranges 100mV & 1000mV & also gives output of
More informationARDUINO WORK BENCH - PART LIST
Nº Commercial Name ARDUINO WORK BENCH - PART LIST Qty. Price [ ] /unit 1 Storage plastic box (15L) 1 4.50 4.50 all Supplier The box (closed volume, insulated, transparent, thick wall but easy to pierce
More informationKeysight Technologies Temperature Measurement Solution for Solar Cell and Module Testing. Application Note
Keysight Technologies Temperature Measurement Solution for Solar Cell and Module Testing Application Note Introduction In many countries, solar power is gaining popularity because the cost of solar cell
More informationSCOPE OF ACCREDITATION TO ISO/IEC & KS Q ISO/IEC
SCOPE OF ACCREDITATION TO ISO/IEC 17025-2005 & KS Q ISO/IEC 17025-2006 Korea Instrument Co., Ltd. Branch 45, Gwangjang-ro 56beon-gil, Sasang-gu, Busan 46976 Phone : 051-322-0880, Fax : 051-322-4066, E-mail
More informationMECHANICAL INSTRUMENTS TEMPERATURE, REL. HUMIDITY, AIR PRESSURE
MECHANICAL INSTRUMENTS TEMPERATURE, REL. HUMIDITY, AIR PRESSURE www.lufft.com /Relative Humidity-Indicators Thermo-Hygrometer 5048.00 Housing diameter 130mm,, dial blue (RH), dial red (Temp.) 0... 100%RH
More informationClause Measurement/testing Testing / measuring equipment / material needed Subcontracting. 3 General requirements None -
IECEE OD-5003-1:2015 IEC 2015 1 TESTING AND MEASUING EQUIPMENT/ALLOWED SUBCONTACTING, Edition 5.0 Automatic electrical controls Part 1: General requirements POVISIONAL equired S May be subcontracted, see
More informationIEC , 1 Ed. ( ) TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING
IEC YTEM FOR CONFIRMITY TETING AND COMMITTEE OF TETING LABORATORIE IEC 62368-1, 1 Ed. (2010-01) TETING AND MEAURING EQUIPMENT/ALLOWED UBCONTRACTING R = Required to be at Lab = May be subcontracted W =
More informationAccurate Measurements, Plot No.103, D Block, Meethapur Ext., Badarpur, New Delhi. Discipline Mechanical Calibration Issue Date
Last Amended on 11.11.2014 Page 1 of 6 I. DIMENSION 1. Dial/ Digital Vernier Caliper $ L.C.: 0.01mm Φ 0 to 200 mm 7.5 µm Using Slip Gauge Set & L.C.: 0.01mm Φ 0 to 300 mm 12.17 µm Using Slip Gauges & Caliper
More informationPrincipal Industrial Training Institute Bilaspur Details of Proposed Procurement under Shopping Mode
Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Principal Industrial Training Institute Bilaspur Details of Proposed Procurement under
More informationLaboratory Accreditation Programmes
Laboratory Address 38J Angle Street, Onehunga, Auckland, 1061 Telephone 09 636-4999 URL Authorised Representative www.cps.co.nz Ms Kirsty Russell Laboratory Manager Client No. 927 Programme Accreditation
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationPRICE SCHEDULE FOR LABORATORY EQUIPMENT Goods and related Services offered within Sri Lanka (in Sri Lankan Rupees)
PRICE SCHEDULE FOR LABORATORY EQUIPMENT 1 2 3 4 5 6 7 8 9 10 11 Goods and related Services offered within Sri Lanka (in Sri Lankan Rupees) Line Department of Chemistry (Faculty of Natural Science) per
More informationRef:CL/Mech./ Cal /BID-01(13-14) Date: 10 July 2013
Ref:CL/Mech./ Cal /BID-0(3-4) Date: 0 July 203 SUBJECT: Procurement of Calibration Services for the Equipments in Central Laboratory (Mechanical). Dear Sirs, Technical & Commercial Bids are invited for
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationONLY use MLR, Ast, or MST
2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 20 2 22 23 24 25 26 27 28 29 30 3 TRANSPORTATION CLUSTER AUTO SERVICE TECHNOLOGY EQUIPMENT LIST ONLY use MLR, Ast, or MST Estimated Cost Each Estimated Total Cost Automotive
More informationInstitute for Design of Electrical Measuring Instruments, Swatantryaveer Tatya Tope Marg, Chunabhatti, Sion, Mumbai, Maharashtra
Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1 Calipers $ Up to 600 mm 10.4 µm Using Caliper Checker by Up to 1000 mm 13.2 µm Using Long Slip Gauge by 2 Height Gauges $ Up to 600 mm 12.8 µm Using
More information+91-8048600749 Broil Sensotek Industries http://www.consumptionmeter.com/ We are one to the topmost manufacturers, exporters and suppliers of CE certified Sensor and Measuring Equipment. Inclusive of oval
More informationContents. Pressure measurement technology Pressure calibrators 18 Exercises 19-20
1 Pressure Contents Topics: Slide No: Pressure measurement technology 03-17 Pressure calibrators 18 Exercises 19-20 2 Pressure Gauges Barometer Used to measure Barometric Pressure Reference is 0 psia,
More informationINDEX. SUPER VENT By Beta Industrial. pages INTRODUCTION CONSTRUCTION PERFORMANCE CHART ACOUSTIC DATA CHART DIMENSION SHEET - SINGLE CABINET FANS
Cabinet Fan SV-1 INDEX INTRODUCTION CONSTRUCTION PERFORMANCE CHART ACOUSTIC DATA CHART pages 01 02 03 04 DIMENSION SHEET - SINGLE CABINET FANS DIMENSION SHEET - TWIN CABINET FANS PERFORMANCE GRAPH WIRING
More informationMA-LINE INSTRUMENTS
INDEX DIGITAL ANEMOMETER (CFM) WITH FLEXIBLE NECK... 7-4 DIGITAL REFRIGERANT PRESSURE AND TEMPERATURE CHART... 7-2 PORTABLE GAS LEAKAGE INDICATOR NATURAL GAS AND PROPANE... 7-4 THERMOMETERS DIGITAL 180
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORYACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationInstruments. Portable. Portable. Instruments. Pressure Temperature Humidity Velocity and Airflow Tachometry Air quality
Portable Instruments Portable Instruments Pressure Temperature Humidity Velocity and Airflow Tachometry Air quality Summary 3 ranges to meet Class 100 Thermometers TK100/TK102 TN100/TN101/TN102 TR100/TR102
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSENSETE CH CWC HEAT-EDGE RAINBOW DOTECH SHIMADEN PR ELECTRONICS KIMO OHKURA SEKONIC HUBA KAISE KIMO INSTRUMENTS CORDEX FRIED ELECTRIC
KIMO INSTRUMENTS SENSETE CH CWC HEAT-EDGE RAINBOW DOTECH PR ELECTRONICS KIMO OHKURA SEKONIC HUBA KAISE CORDEX FRIED ELECTRIC SHIMADEN Product Index SECTION VIII. KIMO INSTRUMENTS CATALOGUE A. Portables
More informationPage : 1 of 16. FIELD OF TESTING : Calibration and Measurement CALIBRATION & MEASUREMENT CAPABILITY EXPRESSED AS AN UNCERTAINITY *
Metrix Precision Pte Ltd Certificate No. : LA-2014-0581-C No. 23 Tagore Lane #02-03/04 Tagore 23 Warehouse Issue No. : 2 Singapore 787601 Date : 29 July 2016 FIELD OF TESTING : Calibration and Measurement
More informationWebster Instruments. (A division of Webtec Products) Product Overview. The Webster Range of Hydraulic Test Equipment
Webster Instruments (A division of Webtec Products) Product Overview The Webster Range of Hydraulic Test Equipment Testing hydraulic systems For anyone who has experienced a hydraulic component failure
More informationDon t over do it! High-performance tools, precision test & measurement devices and great value consumables. See for yourself at ph.rs-online.
Don t over do it! High-performance tools, precision test & measurement devices and great value consumables SEPTEMBER 2016 Where ever you are working we won t over stress the installation. By limiting test
More informationDon t over do it! High-performance tools, precision test & measurement devices and great value consumables. See for yourself at sg.rs-online.
Don t over do it! High-performance tools, precision test & measurement devices and great value consumables SEPTEMBER 2016 Where ever you are working we won t over stress the installation. By limiting test
More informationNon-Contact Phase Rotation Tester
USER GUIDE Non-Contact Phase Rotation Tester Model PRT00 Model PRT00-M Introduction Congratulations on your purchase of this Extech Meter. The PRT00 is used to quickly and accurately determine three phase
More informationTEMP-PLATE. Irreversible Temperature Recording Labels. Fwww.palmerwahl.com PW1250. Digital Revision 10/10
C TEMP-PLATE TEMP-PLATE Irreversible Temperature Recording Labels PW1250 Fwww.palmerwahl.com C Table of Contents and Introduction Temp-Plate Irreversible Temperature Recording Labels Table of Contents
More informationSV-UNOBOX FAN. Mutassim Al-Daour factory for Metal Industries SV-7
SV-UNOBOX FAN Mutassim Al-Daour factory for Metal Industries SV-7 INDEX INTRODUCTION PERFORMANCE GRAPHS TECHNICAL DATA DIMENSIONS ACOUSTIC DATA - SOUND PRESSURE LEVEL ELECTRICAL DETAILS pages - - 7 8 9
More informationAKM 345 Gen2. Instruction Manual. Oil Temperature Indicator AKM OTI Type 34 Winding Temperature Indicator AKM WTI Type 35. Document ID: IST EN
Instruction Manual AKM 345 Gen2 Oil Temperature Indicator AKM OTI Type 34 Winding Temperature Indicator AKM WTI Type 35 Document ID: IST-103-1-EN www.qualitrolcorp.com (IST-103-1-EN) Legal Information
More informationExamples (Not Meant To Be All Inclusive) Hydraulic repair capabilities should include but not be limited to cylinder replacement and cylinder repair,
System Type Hydraulic Pneumatic Examples (Not Meant To Be All Inclusive) Hydraulic repair capabilities should include but not be limited to cylinder replacement and cylinder repair, supply line replacement,
More informationIntersel Dowding and Mills FZCO Company Profile - Aug 2015
Intersel Dowding and Mills FZCO Company Profile - Aug 2015 About Intersel Dowding & Mills Established in 1986, Intersel Dowding and Mills has grown into the leading repair specialist in the Gulf Region
More informationAQUASTAR C6. (Comfort 6000) Next Generation Auto Backwash Valve System. (selectable time-pressure or remote cycle start)
AQUASTAR C6 (Comfort 6000) Next Generation Auto Backwash Valve System (selectable time-pressure or remote cycle start) SIDE MOUNTED AND TOP MOUNTED VALVES WITH QUICK INSTALL ELECTRIC ACTUATORS FOR PIPE
More informationKLP Kiepe Electric GmbH Test and Measuring SERVICES
Test and Measuring THE AUTOMATIC TEST SYSTEM KIEPE ATS The Automatic Test System Kiepe ATS is a function tester for electronic modules and control devices. The Kiepe ATS can be used to test all kinds of
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Marine and Outdoor Power Equipment Technician AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours
More informationNavigating through a world of products
Navigating through a world of products P r o d u c t O v e r v i e w POWER TO CONTROL The Automation & Control Group The Automation Control Group A well respected business in the local industry for almost
More informationFaculty of Mechanical Engineering B.E. Automobile Engineering (R 2013) Semester III
. (R 03) Semester III AT63 AUTOMOTIVE COMPONENTS LABORATORY Multi Cylinder Petrol Engine. 3. 4. 5. 6. 7. 8. 9. 0. Multi Cylinder Diesel Engine Petrol and Diesel fuel systems each Heavy duty vehicle chassis
More informationOil & Gas. Engineering Machinery
. With combined more than 50 years of experience, BOPM has the ability to produce spur, helical, and bevel gears that will conform to your every specification and deliver the performance your application
More information3.2 Pneumatic System Equipment (PSE) Contents
3.2 Pneumatic System Equipment (PSE) Contents 3.2 Remote Trunk Release (PSE/RTR) Model 202 Page Diagnosis Function Test.............................. 11/1 Electrical Test Program Component Locations.........................
More informationCalibration Schedule and Tolerances
Calibration Schedule and Tolerances Version 12 December 2015 Notes 1. Newly purchased Items listed below must be calibrated prior to the end of the first calibration interval if supplied without a calibration
More informationCaliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra
Last Amended on - Page 1 of 10 I. DIMENSION (Basic Measuring, Gauge etc.) 1. PLAIN PLUG / WIDTH/ DEPTH/ Upto 100 mm 1.9 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ 100 mm to 300 mm 3.8
More informationFigure (for tank lorry).
Figure 5.7.3-1 (for tank lorry). 5-95 Figure.5.7.3-2 (for flow meter) 5-96 5.8 Existing Facility and Equipment 5.8.1 DOM 1) Outline of facility DOM was built in 1928 and designed to meet the requirement
More informationtesto Smart Probes The SMART world of Testo HVAC
testo Smart Probes The SMART world of Testo HVAC My world just got a whole lot EASIER The most exciting development in HVAC Instruments. EVER. The biggest family of SMART instruments. Servicing heating
More informationM&M HAS INSTRUMENTATION FOR ANY APPLICATION!
M&M HAS INSTRUMENTATION FOR ANY APPLICATION! The manufacturers listed here represent some of the finest names in the industry comprising of almost any type of IN- STRUMENTATION you can think of. From extremely
More informationCetemet, your ally for your innovative ideas
Cetemet, your ally for your innovative ideas METROLOGY Lab CLIMATE TESTS Lab WELDING AND MATERIALS Lab METROLOGY Services Metrology services 3D Digitizing for dimensional control and reverse engineering
More informationCHOICE OF HYDRO JETTING CONTRACTORS HIGH PRESSURE HYDRO JETTING HEAT EXCHANGER EVAPORATOR CONDENSER BOILER
CHOICE OF HYDRO JETTING CONTRACTORS HIGH PRESSURE HYDRO JETTING 2018 CONDENSER BOILER HEAT EXCHANGER EVAPORATOR INDEX ABOUT PressureJet HYDRO JETTING MODEL SELECTION CHART HW SERIES JETTING SYSTEM KB SERIES
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Torreón, Coahuila, México C.P. 27019 (Hereinafter
More informationPressure Control SYSTEMS
from idea to implementation... Pressure Control SYSTEMS Manifolds Assemblies Test Panels Calibration Systems Custom Software Electromechanical Systems INDUSTRIAL SYSTEMS GROUP T escom is an experienced
More information7526A Precision Process Calibrator. Calibrate temperature, pressure, and low dc voltage process tools in a single benchtop instrument
7526A Precision Process Calibrator Calibrate temperature, pressure, and low dc voltage process tools in a single benchtop instrument The 7526A Precision Process Calibrator calibrates a wide range of pressure
More informationMet One Meteorological Monitoring Station
STANDARD OPERATING PROCEDURES Met One Meteorological Monitoring Station AMBIENT AIR MONITORING PROGRAM for the 130 LIBERTY STREET DECONSTRUCTION PROJECT LOWER MANHATTAN DEVELOPMENT CORPORATION 1 Liberty
More informationTemperature Measurement. Product Range
Temperature Measurement Product Range Company Data CONATEX Dipl.-Ing. L. Colbus GmbH P.O. Box 1220 D-66592 St.Wendel Alsfassener Straße 56 D-66606 St.Wendel Telefon: +49 (0) 6851 / 9339-0 Telefax: +49
More informationSensors/Transducers. Resistance Temperature Device (RTD) resistance-based temperature measurement. Thermistor resistance-based temperature measurement
Sensors/Transducers Resistance Temperature Device (RTD) resistance-based temperature measurement Thermistor resistance-based temperature measurement 300 Ω resistor in voltage divider circuit 10000 Ω resistor
More informationThermal Imaging Infrared Survey. Report. Report. Thermography Inspection at ABC Company.
Thermal Imaging Infrared Survey Report. Thermal Imaging Infrared Survey Report. Thermography Inspection at ABC Company. Vancouver,BC May 25,2012 www.aiturgroup.com info@aiturgroup.com Rick Turdubay, Certified
More information* * Rev. 9 01/18 Product Manual
English Signet 2760 DryLoc ph/orp Preamplifier *3-2760.090* 3-2760.090 Rev. 9 01/18 Product Manual Description The Signet 2760 ph/orp Preamplifiers with DryLoc connectors are part of Signet's growing line
More information