TABBED PAGE DOOR HARDWARE

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "TABBED PAGE DOOR HARDWARE"

Transcription

1 DOOR HARDWARE Index Page Bar Stock Bifold Hardware Bypass Hardware Cam Disk Charley Bar Closers Continuous Hinges Coordinator Corbin Russwin , 13 Door Stops , 42 Electric Strikes Flushbolts , 42 H-Bar Hinges Hole Filler Hollow Core Door Hardware , 60 Kickplates Kwikset Locks Latchlocks , 25 Latch Protectors , 49 Levers, Aluminum Doors , 25 Locksets Maildrop Mail Slots Mounting Brackets, Aluminum Doors MS Lock , 25 Paddle Handles , 25 Panel Door Hardware , 62 Panic Doors TABBED PAGE Patio Door Keepers Patio Door Bumper Patio Door Handles Patio Door Rollers Patio Door Tracks Pull Handles Pull Plates Push Bars Push - in Weatherstrip Push Plates Reinforcing Pivots Schlage Locks Screen Door Keepers Screw - on Weatherstrip Sex Bolts Silencers Strike Plates , 24 Surface Bolts Sweeps Thresholds Uscan Locks , 2 Viewers Wall Protector Weatherstrip Wraparound Plates

2 USCAN LOCKSETS GRADE 1 GRADE 2 Cylindrical Knob Locksets Supplied with a 6 pin cylinder, SC1 keyway, and will accept ASSA, ILCO, MEDECO and SCHLAGE cylinders. 2 3/4" Backset - Stainless Steel UC K110S-O-630 Passage UC K140S-O-630 Privacy UC K150D-O-630 Entrance UC K150IC-630 Entrance UC K170D-O-630 Classroom UC K180D-O-630 Storeroom UC K180D-O-613 Storeroom UC K180IC-630 Storeroom Cylindrical Lever Locksets with 3 1/2" Rose Diameter With Clutch Supplied with a 6 pin cylinder, SC1 keyway, and will accept ASSA, ILCO, MEDECO and SCHLAGE cylinders. Models prepped for IC core will accept cores from Arrow, Best, Falcon, & KSP 2 3/4" Backset - Satin Chrome UC USL110S-613 Passage UC USL110S-626 Passage UC USL140S-626 Privacy UC USL150D-613 Entrance UC USL150D-626 Entrance UC USL150D-IC-626 Entrance UC USL170D-613 Classroom UC USL170D-626 Classroom UC USL170D-IC-626 Classroom UC USL173D-626 Classroom Security UC USL180D-613 Storeroom UC USL180D-626 Storeroom UC USL180D-IC-626 Storeroom Cylindrical Lever Locksets With Clutch 6 pin cylinder supplied (SC1 keyway), & will accept ASSA, ILCO, MEDECO and SCHLAGE cylinders. Models prepped for IC core will accept cores from Arrow, Best, Falcon, & KSP 2 3/4" backset standard UC USL212S-605 Passage UC USL212S-613 Passage UC USL212S-626 Passage UC USL212S(2 ⅜")-626 Passage UC USL242S-605 Privacy UC USL242S-613 Privacy UC USL242S-626 Privacy UC USL242S(2 ⅜")-626 Privacy UC USL252D-IC-613 Entrance IC UC USL252D-IC-626 Entrance IC UC USL252D-605 Entrance UC USL252D-613 Entrance UC USL252D-626 Entrance UC USL252D(2 ⅜")-626 Entrance UC USL272D-IC-613 Classroom IC UC USL272D-IC-626 Classroom IC UC USL272D-605 Classroom UC USL272D-613 Classroom UC USL272D-626 Classroom UC USL272D(2 ⅜")-626 Classroom UC USL282D-IC-613 Storeroom IC UC USL282D-IC-626 Storeroom IC UC USL282D-605 Storeroom UC USL282D-613 Storeroom UC USL282D-626 Storeroom UC USL282D(2 ⅜")-626 Storeroom Cylindrical Lever Locksets Supplied with a 6 pin cylinder, SC1 keyway, and will accept ASSA, ILCO, MEDECO and SCHLAGE UC US10S-B /4 Passage UC US10S-B /8 Passage UC US10S-B /4 Passage UC US10S-B /8 Passage UC US40S-B /4 Privacy UC US40S-B /8 Privacy UC US40S-B /4 Privacy UC US53P-B /4-KD Entrance UC US53P-B /4-KD Entrance UC US53P-B /8-KD Entrance UCUS53P-B /4-KD Entrance UC US53P-B /8-KD Entrance UC US53P-B /4-KD Entrance UC US53P-B /8-KD Entrance UC US53IC-630 Entrance UC US70P-B /4-KD Classroom UC US70IC-630 Classroom UC US80P-B /4-KD Storeroom UC US80P-B /4-KD Storeroom UC US80P-B /8-KD Storeroom UC US80IC-630 Storeroom Deadbolts 6 Way Adjustable SC1 UC D Single UC D Single UC D Single UC D130-IC-613 Single UC D Single UC D130-IC-630 Single UC D Double UC D Double UC D Double UC D230-IC-613 Double UC D Double UC D230-IC-630 Double Phone: (612) page 1 Fax: (612)

3 SPRINGLATCHES US Series Grade 2 Knob USL 200 Series Grade 2 Lever UC G2-2-3/4-SL-605 UC G2-2-3/4-SL-630 UC G2-2-3/8-SL-605 UC G2-2-3/8-SL-630 UC G2P-2-3/4-SL-626 Privacy UC G2P-2-3/8-SL-626 Privacy USL100 Series Grade 1 Levers UC G1SL-2-3/4-630 UC G1SL-2-3/8-630 UC G1SLP-2-3/4-630 UC G1SLP-2-3/8-630 USCAN LOCKSETS BACKSET EXTENSION US Series Grade 2 Knob USL Series Grade 2 Lever UC 57MM Extension for 5" Backset Use with 2-3/4" latch BOLTS G3DB4Wx D Series UC G3DB4Wx605 Grade 3, 4-way Adj UC Grade 2, 6-way Adj UC Grade 2, 6-way Adj GRADE 3 PLYMOUTH KNOBS 2 3/4" BS Knobs UC US10S-PLY /4 Passage UC US10S-PLY /4 Passage UC US10S-PLY /8 Passage UC US40S-PLY /4 Privacy UC US40S-PLY /4 Privacy UC US53P-PLY /4 Entrance UC US53P-PLY /8 Entrance UC US53P-PLY /4 Entrance UC US53P-PLY /8 Entrance UC US70P-PLY /4 Classroom UC US70P-PLY /4 Classroom UC US80P-PLY /8 Classroom UC US80P-PLY /4 Classroom y y Cylindrical Knob Locksets 5 pin WR3 keyway, keyed different Supplied with adjustable backset latch 5 pin KW1 keyway, keyed different Supplied with adjustable backset latch 5 pin SC1 Keyway Adj Latch UC K350D-B-605-SC1 Entrance UC K350D-B-609-SC1 Entrance UC K350D-B-630-SC1 Entrance UC K380D-B-605-SC1 Storeroom UC K380D-B-630-SC1 Storeroom UC K310S-B-605 Passage UC K310S-B-609 Passage UC K310S-B-630 Passage UC K340S-B-605 Privacy UC K340S-B-609 Privacy UC K350D-B-605 Entrance UC K350D-B-609 Entrance UC K Passage UC K KW1 Entry Deadbolts 4 Way Adjustable Bolt Weiser 1555 keyway, 5 pin KD UC D ADJ-MORT/DI Single UC D ADJ-MORT/DI Single UC D ADJ-MORT/DI Single UC D ADJ-MORT/DI Double UC D ADJ-MORT/DI Double 4 Way Adjustable Bolt Kwikset keyway, 5 pin KD Round Corner Latch & Strike UC D KD-KW1 Single Brass UC D KD-KW1 Double Brass 4 Way Adjustable Bolt Removable SC1 keyway cylinder Will accept ASSA, ILCO, and Medeco cylinders UC D ADJ-MORT/DI Single UC D ADJ-MORT/DI Single UC D ADJ-MORT/DI Single UC D ADJ-MORT/DI Double UC D ADJ-MORT/DI Double UC D ADJ-MORT/DI Double Phone: (612) page 2 Fax: (612)

4 SCHLAGE LOCKSETS Phone: (612) page 3 Fax: (612)

5 SCHLAGE LOCKSETS All keyed functions are supplied less cylinder. We recommend the multi-tailpiece cylinder (purchase separately). See Cylinders Section. Phone: (612) page 4 Fax: (612)

6 SCHLAGE LOCKS All keyed functions are supplied less cylinder. We recommend the multi-tailpiece cylinder (purchase separately). See Cylinders Section. Phone: (612) page 5 Fax: (612)

7 SCHLAGE LOCKS Phone: (612) page 6 Fax: (612)

8 SCHLAGE LOCKS ELECTRICALLY UNLOCKED - LEVERS All keyed functions are supplied less cylinder. We recommend the multi-tailpiece cylinder (purchase separately). See Cylinders Section. All locks are supplied with a 2 3/4 backset latch and a /4 x 4 7/8 ANSI strike (no box). Phone: (612) page 7 Fax: (612)

9 SCHLAGE LOCKS All keyed functions are supplied less cylinder. We recommend the multi-tailpiece cylinder (purchase separately). See Cylinders Section. All locks are supplied with a 2 3/4 backset latch and a /4 x 4 7/8 ANSI strike (no box). Phone: (612) page 8 Fax: (612)

10 SCHLAGE LOCKS Phone: (612) page 9 Fax: (612)

11 SCHLAGE DEADBOLTS B500 SERIES B600 SERIES Commercial Grade 1 Deadbolt Introducing the B500-Series deadbolt from Schlage, a revolutionary new deadbolt that delivers higher security, tougher performance and the ultimate in installation versatility. Designed by locksmiths for locksmiths, the B500- Series deadbolt can be fi tted with any Schlage cylinder, fi ts virtually every door you service, enhances lock strength on the jamb side of the door, and will change forever the way you look at deadbolts. Classic "C" Keyway Single Cylinder Deadbolt Lock SC B560P-605-C SC B560P-605-KA4-C SC B560P-609-C SC B560P-609-KD-C SC B560P-609-KA4-C SC B560P-612-C SC B560P-613-C SC B560P-619-C SC B560P-626-C SC B560P-626-KA4-C SC B563P-626-C Everest Keyway Single Cylinder Deadbolt Lock KD C123 SC B560P-605-C123 SC B560P-609-C123 SC B560P-626-C123 Double Cylinder Deadbolt Lock SC B562P-605-C SC B562P-609-C SC B562P-626-C SC B562P-626-KA4-C Door Bolt Occupancy Indicator SC B Door Bolt (No Outside Trim) SC B SC B B660P Single Cylinder Deadbolt Lock Deadbolt thrown or retracted by key from outside or by inside turn unit. Bolt automatically deadlocks when fully thrown. Everest Keyway Single Cylinder Deadbolt Lock KD C123 SC B660P-626-C /4" Backset Classic "C" Keyway Single Cylinder Deadbolt Lock KA4 C SC B660P-605-KA4-C 2-3/4" Backset SC B660P-609-KA4-C 2-3/4" Backset SC B660P-626-KA4-C 2-3/4" Backset SC B660P-626-KA4-C* 2-3/8" Backset B662P Double Cylinder Deadbolt Lock Deadbolt thrown or retracted by key from outside or by inside turn unit. Bolt automatically deadlocks when fully thrown. Classic "C" Keyway Double Cylinder Deadbolt Lock KA4 C SC B662P-605-KA4-C 2-3/4" Backset SC B662P-626-KA4-C 2-3/4" Backset Screw Pack over 1-3/4" to 2-1/4" SC For B560 SC For B560 SC For B562 SC For B562 Keypad Deadbolt Latch with Triple Option Faceplates SC Deadbolt Latch SC Deadbolt Latch Deadbolt Square Corner 2 3/8" 2 3/4" Adjustable SC Deadbolt Latch SC Deadbolt Latch Deadbolt Drive-In 2 3/8" 2 3/4" Adjustable SC Deadbolt Latch y Phone: (612) page 10 Fax: (612)

12 KWICKSET KNOBLOCKS KS 300T Number / Model 200 Passage 300 Bed/Bath 300 Bathroom 400 Entry Design / Function For all interior doors where a simple latch is all that is required. Plain knob or lever on both sides. Turning either knob or lever will retract latch bolt at all times to open door. For bedroom or bathroom doors. Turn button in interior knob or lever. Turning button locks both knobs or levers. Lock may be opened by an emergency entry key in exterior knob or lever. For bathroom models, indicate U.S. 26 fi nish on interior knob or lever. Entry lockset for keyed exterior doors. Key from exterior and turn button in interior will lock or unlock exterior knob or interior knob or lever. Part Number - (TYLO DESIGN) KS 200T-3-SCAL-SCS KS 300T-3-SCAL-SCS KS 300T-5-SCAL-SCS KS 400T-3-SCAL-SCS-K2 KS 400T-5-SCAL-SCS-K2 KS 200T Finishes: US3 BRASS US5 ANT. BRASS US26D SATIN CHROME MAXIMUM SECURITY NUMBER MODEL FUNCTION 660 Standard Duty Single Cylinder Deadlock 665 Standard Duty Double Cylinder Deadlock Key retracts bolt from exterior, turnpiece operates bolt from interior. Key retracts bolt from exterior, and interior. Part Number - (Single Cylinder) KS SCAL-SCS-K2 KS RFAL-SCS-K2 KS SCAL-SCS-K2 KS RFAL-SCS-K2 Part Number - (Double Cylinder) KS SCAL-SCS-K2 KS SCAL-SCS-K2 ACCESSORIES KS Large Modernization Kit Consists of two trim plates, (3-1/2 x 10-1/2 ) and latch and strike plate, for covering old style mortise locks. Brass. KS Small Modernization Kit Consists of two trim plates, (3-3/8 x 7-1/4 ) and latch and strike plate. Brass. Round Rosette 3-13/16" for 2-3/8" or 2-3/4" backset. If you do not see the part you need, please send a sample or call our customer service department. Phone: (612) page 11 Fax: (612)

13 CORBIN RUSSWIN ML 2000 Series (Less Cylinders) Mortise Locksets Features Handing Latchbolt Handed; quick reversible. 2-piece mechanical with antifriction insert, 5/8 x 1 x 3/4 The lockset can be re-handed without disassembling the throw. lock case. Auxiliary Latchbolt Door Thickness 9/16 effective throw and 3/8 1-3/4 standard. effective auxiliary latch Backset deadlocking. 2-3/4 standard. Strike Lock Case Wrought brass or bronze, ANSI Heavy-gauge chrome plated straight lip standard, 4-7/8 x 1- steel, 5-7/8 x 4 x 15/16. 1/4 x 1-1/8 lip to center. Front Heavy-gauge steel, 8 x 1-1/4 x -3/32. Accommodates flat doors and doors beveled 1/8 in 2. Furnished 1-1/16 wide for 1-3/8 doors. Patented latchtail enables easy handing changes Heavy-gauge internal parts provide security, reliability, and durability Armored front conceals lock mounting screws and onepiece heavygauge steel front 1 throw, one-piece deadbolt meets security Grade 1 Heavy-duty 3/4 throw latchbolt with stainless steel insert provides positive secure latching Lustra Complies with codes requiring lever to return to within 1/2 (13mm) of door face. Brass, bronze or stainless steel. Global Brass, bronze or stainless steel. LWA Lever: Wrought Rose: Wrought LWM Lever: Wrought Escutcheon: Wrought GWC Knob: Wrought Rose: Wrought reinforced GWM Knob: Wrought reinforced Escutcheon: Wrought Part Number (PASSAGE) RW ML2010-GWM-626 RW ML2010-LWA-630 RW ML2010-LWM-626 Part Number (CLASSROOM) RW ML2055-GWC-626-LC RW ML2055-GWM-626-LC RW ML2055-LWA-630-LC RW ML2055-LWM-626-LC Part Number (DORMITORY OR ENTRANCE) RW ML2065-GWC-626-LC RW ML2065-GWM-626-LC RW ML2065-LWA-630-LC RW ML2065-LWM-626-LC (ENTRANCE & APARTMENT) RW ML2048-GWM-626-LC RW ML2048-LWA-630-LC RW ML2048-LWM-626-LC (ENTRANCE & OFFICE) RW ML2051-GWC-626-LC RW ML2051-LWA-630-LC RW ML2051-LWM-626-LC (STOREROOM & CLOSET) RW ML2057-GWC-626-LC RW ML2057-GWM-626-LC RW ML2057-LWA-630-LC RW ML2057-LWM-626-LC If you do not see the part you need, please send a sample or call our customer service department. (APARTMENT OR DORMITORY) RW ML2067-GWC-626-LC RW ML2067-GWM-626-LC RW ML2067-LWA-630-LC RW ML2067-LWM-626-LC Phone: (612) page 12 Fax: (612)

14 CORBIN RUSSWIN ML 2000 SERIES LOCKSETS LL = Lock Case Only for Levers Product No. Outside - Inside Type Description RW ML2010-LL-626 Passage or Closet Latchbolt by grip either side. Both grips always free. RW ML2022-LL-626 Store Door Latchbolt by grip* either side. Deadbolt by key either side. RW ML2030-LL-626 Privacy Bedroom or Bathroom Latchbolt by grip either side. Deadbolt by thumbturn lever inside or by emergency release tool outside. Inside grip simultaneously retracts latchbolt and deadbolt. RW ML2048-LL-626 Entrance or Apartment Latchbolt* by key outside or by grip either side, unless outside grip is locked by toggle-action stop. Deadbolt by key outside or by thumbturn lever inside. Inside grip always free. RW ML2051-LL-626 Entrance or Office Latchbolt by key outside or by grip either side, unless outside grip is locked by toggle-action stop. Auxiliary latch deadlocks latchbolt. Inside grip always free. RW ML2055-LL-626 Classroom Latchbolt by grip either side, unless outside grip is locked by key outside. Auxiliary latch deadlocks latchbolt. Inside grip always free. RW ML2057-LL-626 Storeroom or Closet Latchbolt by grip inside or by key outside. Outside grip always rigid. Auxiliary latch deadlocks latchbolt. Inside grip always free. RW ML2065-LL-626 Dormitory or Entrance Latchbolt by grip either side. Deadbolt by key outside or by thumbturn lever inside. Inside grip simultaneously retracts latchbolt and deadbolt. RW ML2067-LL-626 Latchbolt by grip either side, unless outside grip is locked by toggle-action stop or by projection of deadbolt. Deadbolt by key outside or by thumbturn lever inside. Inside grip simultaneously retracts latchbolt and deadbolt; outside grip remains locked. Auxiliary latch deadlocks latchbolt. * When lever handles are furnished, both outside and inside are locked when deadbolt is projected. Phone: (612) page 13 Fax: (612)

15 WRAP AROUND PLATES For Cylindrical Door Locks With 2 1/8 Hole Backset Door Dimensions Finish DJ 2-AB-CW 2 3/8 1 3/4 4 X 9 Antique Brass DJ 2-PB-CW 2 3/8 1 3/4 4 X 9 Polished Brass DJ 2-S-CW 2 3/8 1 3/4 4 X 9 Stainless Steel DJ 4-AB-CW 2 3/4 1 3/4 4 1/4 X 9 Antique Brass DJ 4-BZ-CW 2 3/4 1 3/4 4 1/4 X 9 Bronze DJ 4-PB-CW 2 3/4 1 3/4 4 1/4 X 9 Polished Brass DJ 4-S-CW 2 3/4 1 3/4 4 1/4 X 9 Stainless Steel For Use With Heavy Duty Grade 1 & Grade 2 Key-In-Levers DJ 4-BZ-2-CW 2 3/4 1 3/4 4 3/4 X 9 Bronze DJ 4-PB-2-CW 2 3/4 1 3/4 4 3/4 X 9 Polished Brass DJ 4-S-2-CW 2 3/4 1 3/4 4 3/4 X 9 Stainless Steel For Deadbolts With 1 1/2 Hole DJ 6-AB-CW 2 3/8 1 3/4 4 X 4 1/2 Antique Brass DJ 6-PB-CW 2 3/8 1 3/4 4 X 4 1/2 Polished Brass DJ 6-S-CW 2 3/8 1 3/4 4 X 4 1/2 Stainless Steel DJ 8-AB-CW 2 3/4 1 3/4 4 1/4 X 4 1/2 Antique Brass DJ 8-BZ-CW 2 3/4 1 3/4 4 1/4 X 4 1/2 Bronze DJ 8-PB-CW 2 3/4 1 3/4 4 1/4 X 4 1/2 Polished Brass DJ 8-S-CW 2 3/4 1 3/4 4 1/4 X 4 1/2 Stainless Steel For Double Lock Combination Locksets with 2 1/8 holes with 3 5/8 centers DJ 261-AB-CW 2 3/8 1 3/4 4 X 9 Antique Brass DJ 261-PB-CW 2 3/8 1 3/4 4 X 9 Polished Brass For Double Lock Combination Locksets with 1 1/2 Hole on Top and 2 1/8 Hole on Bottom with 4 Centers DJ 264-AB-CW 2 3/8 1 3/4 4 x 9 Antique Brass DJ 264-PB-CW 2 3/8 1 3/4 4 x 9 Polished Brass DJ 264-S-CW 2 3/8 1 3/4 4 x 9 Stainless Steel For Double Lock Combination Locksets with 2 1/8 holes with 3 5/8 centers DJ 261-AB-CW 2 3/4 1 3/4 4 1/4 X 9 Polished Brass DJ 261-PB-CW 2 3/8 1 3/4 4 x 9 Stainless Steel For Double Lock Combination Locksets with 1 1/2 Hole on Top and 2 1/8 Hole on Bottom with 4 Centers DJ 484-AB-CW 2 3/4 1 3/4 4 1/4 X 9 Antique Brass DJ 484-PB-CW 2 3/4 1 3/4 4 1/4 X 9 Polished Brass DJ 484-S-CW 2 3/4 1 3/4 4 1/4 X 9 Stainless Steel 2-CW 4-CW 261-CW 481-CW 4-2-CW 6-CW 8-CW 264-CW 484-CW DJ 10-FE Door Reinforcer For deadbolts and key-in-knob locks. Door: 1 3/8 Dimensions: 4 1/2 x 1 Part Number DJ 10-AB-FE Antique Brass DJ 10-PB-FE Polished Brass DJ 20-FE Door Reinforcer For deadbolts and key-in-knob locks. Door: 1 3/4 Dimensions: 4 1/2 x 1 Part Number DJ 20-AB-FE Antique Brass DJ 20-PB-FE Polished Brass DJ 20-S-FE Stainless Steel Phone: (612) page 14 Fax: (612)

16 STRIKES Available in US3 = Brass or US26D = dull chrome Dimensions FLS 2 1/4 x 1 1/4 Dimensions T2STRK 2 3/4 x 1 1/8 Dimensions TS 2 3/4 x 1 1/8 Dimensions ASAST 4 7/8 x 1 1/4 11" 6" 7-3/4" 8" 775 Heavy Gauge Double Strike 3-5/8 to 4 Center 1-1/4 and 3 Long Screws, Secures Strike to Stud. 3-5/8 to 4 Centers. 13 GA. (Carded) 760 Heavy Gauge Deadbolt Strike 6 H 1-1/2 Long Screws, Secures Strike to Stud. 13 GA. (Carded) 765 Heavy Gauge Deadbolt Strike 7-3/4 H 1-1/4 and 3 Long Screws, Secures Strike to Stud. 13 GA. (Carded) 770 Heavy Gauge Lip Strike 1-1/4 and 3 Long Screws, Secures Strike to Stud. 13 GA. (Carded) PRODUCT NO. FINISH BACK SET DOOR THICKNESS OVERALL SIZE Heavy Gauge Deadbolt Str 6 H MA 760-B US3 N/A ALL 1-1/8 x 6 Heavy Gauge Deadbolt Str 7-3/4 H MA 765-B US3 N/A 1-3/4 or Thicker 1-5/8 x 7-3/4 Heavy Gauge Deadbolt Str 7-3/4 H MA 770-B US3 N/A ALL 1-1/4 x 8 Heavy Gauge Deadbolt Str 7-3/4 H MA 775-B US3 N/A 1-3/4 or Thicker 1-5/8 x 11 ALUMINUM FRAME FILLER plates fit selected Folger Adams, Von Duprin, and Rofu numbers DJ AF-260-DU 4 ⅞ x 1 ¼ Duro Coated Electric Strike Filler DJ AF-260-SL Fits selected Folger Adams, Von Duprin, 4 ⅞ x 1 ¼ Silver Coated DJ AF-261-DU and Rofu numbers 4 ⅞ x 1 ¼ Duro Coated DJ AF-261-SL AF-260 AF-261 Polybagged 4 ⅞ x 1 ¼ Silver Coated DJ AF-29-SL Electric Strike Filler Fits selected Folger Adams, Von Duprin, 9 x 1 ⅜ Silver Coated DJ AF-29L-SL and Rofu numbers Polybagged 9 x 1 ⅜ Silver Coated AF-29 AF-29L DJ AF-291-SL Electric Strike Filler Fits selected Folger Adams, Von Duprin, 9 x 1 ⅜ Silver Coated DJ AF-291L-SL and Rofu numbers Polybagged 9 x 1 ⅜ Silver Coated AF-291 AF-291L DJ FS-260-PC ANSI strike cut out FS-260-PC 4 ⅞ x 1 ¼ Prime Coat Polybagged Phone: (612) page 15 Fax: (612)

17 PANIC BARS VON DUPRIN users of Von Duprin products may have questions. 26D = Dull Chrome, 28 = Anodized Aluminum, 313 = Dark Bronze, 10B = Dark Bronze Phone: (612) page 16 Fax: (612)

18 PANIC BARS VON DUPRIN 26D = Dull Chrome, 28 = Anodized Aluminum, 313 = Dark Bronze, 4 = Brass Phone: (612) page 17 Fax: (612)

19 PANIC BARS Jackson Panic Exit Devices Designed for Use With 1-3/4 Narrow, Medium, and Wide Stile Aluminum, Wood or Hollow Metal Doors Concealed Fastening for Added Security Jackson 10 Series Panic Exit Devices Available in both a Rim and Concealed Vertical Rod version. This device is suitable for use with 1-3/4 (44.5 mm) narrow, medium, and wide stile aluminum, wood, or hollow metal doors. Extensions for taller doors are available. For Model 1085 keyed entry, a No. 86 Mounting Pad is required when using a Mortise Cylinder. For Model 1095 keyed entry, a Rim Cylinder is required, but a Mounting Pad is not required. Model 1095 Type Handing Finish 1095A42L Rim Left Hand-Reverse Bevel Satin Aluminum 1095A42R Rim Right Hand-Reverse Bevel Satin Aluminum 1095BRZ42L Rim Left Hand-Reverse Bevel Dark Bronze 1095BRZ42R Rim Right Hand-Reverse Bevel Dark Bronze 1085A42 Concealed Vertical Rod Non-Handed Satin Aluminum 1085BRZ42 Concealed Vertical Rod Non-Handed Dark Bronze Model 1085 FEATURES: Contoured Field Sizeable 48" (1219 mm) Long Crossbar Standard Door Height 84" (2134 mm) Extension Available Dual Dogging Feature By Outside Cylinder By Dogging Pins on Panic Housing Jackson 20 Series Panic Exit Devices Available in both a Rim and Concealed Vertical Rod version, this device is suitable for use with 1-3/4 (44.5 mm) narrow, medium, and wide stile aluminum, wood, or hollow metal doors. It has been certified to ANSI Grade 1 specification, and is available with optional high-impact resistance upgrades. For doors wider than 36 (914 mm), field sizeable lengths up to 48 (1219 mm) are available on special order. Extensions for doors taller than 84 (2134 mm) are available. For Model 2085 keyed entry, a No. 86 Mounting Pad is required when using a Mortise Cylinder. For Model 2095 keyed entry, a Rim Cylinder is required, but a Mounting Pad is not required. Model 2095 Model 2085 Type Handing Finish 2095A36L Rim Left Hand-Reverse Bevel Satin Aluminum 2095A36R Rim Right Hand-Reverse Bevel Satin Aluminum 2095BRZ36L Rim Left Hand-Reverse Bevel Dark Bronze 2095BRZ36R Rim Right Handed-Reverse Bevel Dark Bronze 2085A36L Concealed Vertical Rod Left Hand-Reverse Bevel Satin Aluminum 2085A36R Concealed Vertical Rod Right Hand-Reverse Bevel Satin Aluminum 2085BRZ36L Concealed Vertical Rod Left Hand-Reverse Bevel Dark Bronze 2085BRZ36R Concealed Vertical Rod Right Hand-Reverse Bevel Dark Bronze FEATURES: Standard 36" (914 mm) Wide Door - Field Sizeable up to 48" (1219 mm) Width Available on Special Order Standard Door Height 84" (2134 mm) Extension Available Concealed Easy to Use Dogging System Optional Cylinder Dogging Available on Special Order Phone: (612) page 18 Fax: (612)

20 PANIC BARS Jackson 1200 Series Panic Exit Devices Designed for Use With 1-3/4 Narrow, Medium, and Wide Stile Aluminum, Wood or Hollow Metal Doors Soft-Touch Smooth Action Push-Pad Field Sizeable Available in a Rim, Concealed, and Surface Vertical Rod versions, this device is suitable for use with 1-3/4 (44.5 mm) narrow, medium, and wide stile aluminum, wood, or hollow metal doors. The base is easily trimmed for field sizing, and the vertical rods are shipped to fit up to 84 (2134 mm) tall doors. Extensions or longer rods for taller doors are available on special order. This Exit Device features an easy to use dogging system, and is available with keyed cylinder dogging on special order. The 1200 Series touch pad with Soft-Touch insert requires slight pressure anywhere on bar insert for instant release of the locking mechanism. Overall projection is only 2-7/8 (73 mm) from the door surface, and mounting hardware is concealed. Type Handing Finish 1275A36X84 Surface Vertical Rod Non-Handed Satin Aluminum 1275BRZ36X84 Surface Vertical Rod Non-Handed Dark Bronze 1285A36L Concealed Vertical Rod Left Hand-Reverse Bevel Satin Aluminum 1285A36R Concealed Vertical Rod Right Hand-Reverse Bevel Satin Aluminum 1285BRZ36L Concealed Vertical Rod Left Hand-Reverse Bevel Dark Bronze 1285BRZ36R Concealed Vertical Rod Right Hand-Reverse Bevel Dark Bronze 1295A36 Rim - 36 (914 mm) Base Non-Handed Satin Aluminum 1295BRZ36 Rim - 36 (914 mm) Base Non-Handed Dark Bronze 1295A48 Rim - 48 (1219 mm Base Non-Handed Satin Aluminum 1295BRZ48 Rim - 48 (1219 mm) BAse Non - Handed Dark Bronze Devices Model 1275 Model 1285 Model 1295 SPECIFICATIONS: 1275 Surface Vertical Rod Device Standard 36" (914 mm) Wide Door - 48" (1219 mm) Width Available on Special Order Standard Door Height 84" (2134 mm) Field Sizeable 120" (3048 mm) Tall Available on Special Order 1285 Concealed Vertical Rod Standard 36" (914 mm) Wide Door - 48" (1219 mm) width Available on Special Order Standard Height 84" (2134 mm) - Extension Available Requires Cat. No. 86 Cylinder Mounting Pad When Using Mortise Cylinder for Keyed Outside Entry 1295 Rim Device Stocked in Both 36" (914 mm) and 48" (1219 mm) Widths Surface Mounted Roller Strike Standard Requires Rim Cylinder for Keyed Entry Jackson Locking Flat Lever Outside Trim Designed for Use With Jackson 1200 and 20 Series Panic Exit Devices Non-Handed, Field Reversible The Jackson Locking Flat Lever Outside Trim has a narrow 1-3/4 (44.5 mm) escutcheon that allows it to be used on narrow stile doors. The flat style lever is key-controlled, and requires the use of a Mortise Cylinder, which locks or unlocks the lever (ANSI Function 80) Offset Finish 75LV02A Model 1275 Surface Vertical Rod Panic Device Satin Aluminum 75LVO2BRZ Model 1275 Surface Vertical Rod Panic Device Dark Bronze 85LV02A Models 1285 and 2085 Concealed Vertical Rod Panic Devices Satin Aluminum 85LV02BRZ Models 1285 and 2085 Concealed Vertical Rod Panic Devices Dark Bronze 95LV02A Models 1295 and 2095 Rim Panic Devices Satin Aluminum 95LV02BRZ Models 1295 and 2095 Rim Panic Devices Dark Bronze 4-1/2" (114 mm) 1-3/4" (45 mm) C L 7-7/16" (188 mm) 2-1/4" (57 mm) Projection Jackson 12 Top Rod Extender For Use With Jackson 1085, 1285, and 2085 Concealed Vertical Rod Exit Devices The Jackson Top Rod Extender is 12 (305 mm) long, and is intended to extend the length of the top rod for doors over 84 (2134 mm) when used with Jackson Concealed Vertical Rod Panic Exit Devices. J1347 Jackson #86 Cylinder Mounting Pad For Mounting Mortise Cylinders on Jackson Panic Exit Devices The Jackson #86 Cylinder Mounting Pad with locking ring is for use with a Mortise Cylinder for keyed entry on Jackson 1085, 1285, and 2085 Concealed Vertical Rod Panic Exit Devices. 86A 86BRZ CAT. NO. 86A 86BRZ Finish Satin Aluminum Dark Bronze FINISH Satin Aluminum Dark Bronze Phone: (612) page 19 Fax: (612)

21 PANIC BARS ADAMS RITE LIFE SAFTEY EXIT DEVICES Series 8200 How To Order 8100/8200 SVR Order cylinder separately if required. On pairs of doors, specify one-half total exit opening for width. Series For Wood or Hollow Metal Door 2. For Metal Stile Glass Door Door Opening Width 30 Inches 42 Inches 36 Inches 48 Inches NARROW STILE SURFACE VERTICAL ROD Features: Patented top latching mechanism interlocks door to frame. Adjustable steel rods protected in contoured covers. Pushbar clad or anodized, not plated, in a variety of finishes. Easy to install. Clean, unobtrusive design. Strong, durable construction for a high level of security. Handing: Device is non-handed. Lever Entry Trim is field reversible. Pushbar Length: Standard Sizes: Dimensioned for 30, 36, 42 & 48 openings. Standard width bars can be field cut to the next smallest opening width. Bar Height: Standard model adjusts from 30 to 44. Door Height: Standard model fits up to 8ft. door, with bar height at For doors up to 10ft., use Tall Door Kit Door Thickness Suits 1-3/4 standard, up to 2-1/4. Stile Width: Minimum 2 Stile. Fits Narrow, Medium and Wide Stile aluminum doors. AR Narrow Stile Glass Door AR Narrow Stile Glass Door MONITORED DUMMY PUSHBAR Dummy pushbar with no latch mechanism but with either a single or dual monitor/signal switch. Most common application is in conjunction with a maglock where bar is used to turn off magnet and allow exit form building. Dual switch version allows redundancy where required by code or the operation of a signal device along with maglock. AR 8099-M Active Dummy AR 8099-M Active Dummy EXAMPLE: US3 Vertical Finish Satin Alum Bronze Anod Black Anod. 0 US Finish Pushbar Finish Satin Alum Bronze Anod Black Anod. 0 US Finish Add Dash No. for US Finish US3 - Bright Brass US32 - Bright Stainless US4 - Satin Brass US32D - Satin Stainless US9 - Bright Bronze SP - Special US10 - Satin Bronze How To Order 8400 Mortise Order cylinder separately if required. Door Opening Width Face Shape 0 Flat 1 Radius 4 Rad. w/w seal 2 Bevel 30 Inches 42 Inches 36 Inches 48 Inches EXAMPLE: US3 Vertical Finish Satin Alum Bronze Anod Black Anod. 0 US Finish Door Hand 7 RHR 8 LHR Backset 2 31/ / /8 Pushbar Finish Satin Alum Bronze Anod Black Anod. 0 US Finish Add Dash No. for US Finish US3 - Bright Brass US10 - Satin Bronze US4 - Satin Brass US32 - Bright Stainless US9 - Bright Bronze US32D - Satin Stainless RETROFIT KITS The retrofit kit will contain the dogging assembly, 2-keys, blank end cap, drilling template, 7/32 drill bit and installation instructions. AR /8200 AR /8400/8500/8600 AR /8800 AR Dogging Key 1/8 AR Dogging Assy Only 8000 Series NARROW STILE MORTISE EXIT DEVICE Features: Heavy duty deadlatching mechanism Pushbar clad or anodized, not plated, in a variety of finishes. Easy to install. Clean, unobtrusive design. Strong, durable construction for a high level of security. Handing: Specify handing and bevel if applicable. Lever Entry Trim is field reversible. Pushbar Length: Standard Sizes: Dimensioned for 30, 36, 42 & 48 openings. Standard width bars can be field cut to the next smallest opening width. Backsets available in 31/32, 1-1/8, 1-1/2. Door Thickness Suits 1-3/4 standard. Can be modified for thicker doors. Stile Width: Minimum 2 Stile. Fits Narrow, Medium and Wide Stile aluminum doors. Projection 2-5/8 when fully projected, 1-5/8 when dogged. Materials: Pushbar made of extruded aluminum,clad or anodized in a variety of finishes. Dogging: Standard dogging with hex key or cylinder dogging option. Electric dogging also available. AR Exit Device-Mort N/Style AR Exit Device-Mort N/Style AR Exit Device-Mort N/Style AR Exit Device-Mort N/Style AR Exit Device-Mort N/Style AR Exit Device-Mort N/Style AR Exit Device-Mort N/Style AR Exit Device-Mort N/Style AR Exit Device-Mort N/Style AR Exit Device-Mort N/Style AR Exit Device-Mort N/Style Phone: (612) page 20 Fax: (612)

22 PANIC BARS ADAMS RITE LIFE SAFTEY EXIT DEVICES 8600 Series How To Order Order cylinder escutcheon and cylinder separately if required. On pairs of doors, specify one-half total exit opening for width. Specify 8655 Tall Door Kit if required. 8700/8800 Series NARROW STILE CONCEALED VERTICAL ROD EXIT DEVICE Features: Patented top latching mechanism interlocks door to frame. Top and bottom adjustable steel rods. Pushbar clad or anodized, not plated, in a variety of finishes. Easy to install. Clean, unobtrusive design. Strong, durable construction for a high level of security. Handing: Device is non-handed. Lever Entry Trim is field reversible. Pushbar Length: Standard Sizes: Dimensioned for 30, 36, 42 & 48 openings. Standard width bars can be field cut to the next smallest opening width. Bar Height: Adjustable from 30 to 44. Door Height: Standard unit adjustable for doors up to 66 above the selected bar height. For doors over 66 above bar height, up to 10, use 8655 Tall Door Kit. AR Alum Stile Glass Door AR Alum Stile Glass Door AR 8655 Tall Door Kit For/8600 Door Type 5 Hollow Metal 6 Alum/Glass 8600 Series (CVR) Door Opening Width 30 Inches 42 Inches 36 Inches 48 Inches EXAMPLE: US3 Door Finish Satin Alum Bronze Anod Black Anod. 0 US Finish Pushbar Finish Satin Alum Bronze Anod Black Anod. 0 US Finish Add Dash No. for US Finish US3 - Bright Brass US10 - Satin Bronze US4 - Satin Brass US32 - Bright Stainless US9 - Bright Bronze US32D - Satin Stainless CYLINDER ESCUTCHEONS Required to mount any make standard mortise cylinder (with MS Cam) on outside. Specify finish being matched. AR W/MS CAM BRZ AR W/MX CAM ALM RIM MOUNTED EXIT DEVICE Features: Patented Starwheel Bolt interlocks door to frame. Pushbar is anodized or clad, not plated, in a variety of finishes. Unobtrusive design for clean sight lines. Easy to install. Strong, durable construction for a high level of security. AR Wood & Hollow Metal Door AR Alum Stile Glass Door AR Alum Stile Glass Door AR Alum Stile Glass Door AR Alum Stile Glass Door ELECTRIC LATCH RETRACTION The EL option uses a solenoid mounted in pushbar for instantaneous unlocking and locking of the exit device from a remote location or access control device. Because electrical operation of device is fail-secure, this option can be used on fire-rated as well as life-safety applications. In the event of a power failure device automatically relocks. AR 8801EL-36-12VDC Rim Alum. AR 8801EL-36-24VDC Rim Alum. AR 8802EL-36-12VDC Rim Alum. AR 8802EL-36-24VDC Rim Alum. Door Type 7 Wood/Hollow Metal 8 Narrow Stile Glass How To Order 8700/8800 Rim Door Opening Width 30 Inches 42 Inches 36 Inches 48 Inches EXAMPLE: US3 Pushbar Finish Satin Alum Bronze Anod Black Anod. 0 US Finish Add Dash No. for US Finish US3 - Bright Brass US4 - Satin Brass US9 - Bright Bronze US10 - Satin Bronze US32 - Bright Stainless US32D - Satin Stainless Phone: (612) page 21 Fax: (612)

23 DEAD LATCHES ADAMS RITE 1.0 x 6 7/8 Face Plate /4 x 1.25 x 8 Face Plate 4510 STANDARD DUTY Deadlatch Latchlock Series AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR MC AR MC Face Shape 0 Flat 1 Radius 1W Rad. w/w seal 2 Bevel Strike Size (*Less Faceplate & Mounting Tabs) How To Order Deadlatches Latchlock Backset 1 7/8 2 31/ / /2 7/8 LH 7/8 RH 31/32 LH 31/32 LH 31/32 RH 31/32 RH 1-1/8 LH 1-1/8 LH 1-1/8 RH 1-1/8 RH 1-1/2 LH 1-1/2 LH 1-1/2 RH 1-1/2 RH 1-1/8 LH* 1-1/8 RH* Door Hand 5 LH or RHR 6 RH or LHR EXAMPLE: Strike Shape/Lip Length 01 Flat/Std. Jamb 02 Radius/Std. Stile 17 Flat Center-hung 4.0 Jamb 21 Flat Center-hung 4.5 Jamb XX Other lip lengths Finish 628 Satin Alum. 313 Bronze Anod. 335 Black Anod ANSI SIZE LATCHLOCK For Hollow Metal or Wood Doors AR /8 LH AR /8 LH AR /8 RH AR /8 RH AR /2 LH AR /2 LH AR /2 RH AR /2 RH AR 4920AN /2 LH AR 4920AN /2 RH How To Order 4920 ANSI Latchlock Deadlatch 1. Specify QUANTITY 2. Specify CATALOG NO. with DASH NO. to Specify: Door Nose Shape 4920AN - Flat 4922AN - Bevel EXAMPLE: 4920AN Hand 05 RH or LHR 06 LH or RHR Strike Less Strike Finish 628 Alum 612 Satin Bronze 313 Bronze Anod. Phone: (612) page 22 Fax: (612)

24 ALUMINUM DOOR HARDWARE CRL Flush Flush Bolts Bolts Radiused Face Face With With 1/8", 3/16" or 1/4" (3.2, 4.8, or 6.4 mm) Offsets Rod Length for 12" (305 mm) Face Centerline Installation 7/8" (22.2 mm) Backset 5/8" (15.9 mm) Throw 4-1/4" (108 mm) 5-7/32" (132.6 mm) These Flush Bolts are designed to work on any radius faced narrow stile aluminum door. Intended to securely lock an inactive door. Three different offsets are available in aluminum or bronze finishes. A Nylon Flush Bolt Guide is included. One per package. 15/16" (23.8 mm) 7/8" (22.2 mm) Backset CAT. Part NO. # OffsetOFFSET Finish FINISH DL2210A18 1/8 (3.2 1/8" mm) (3.2 mm) Aluminum Aluminum DL2210DU18 DL2210DUI18 1/8 (3.2 1/8" mm) (3.2 mm) Bronze Bronze DL2210A316 3/16 (4.8 3/16" mm) (4.8 mm) Aluminum Aluminum DL2210DU316 3/16 (4.8 3/16" mm) (4.8 mm) Bronze Bronze DL2210A14 1/4" (6.4 mm) Aluminum DL2210A14 1/4 (6.4 mm) Aluminum DL2210DU14 1/4" (6.4 mm) Bronze DL2210DU14 1/4 (6.4 mm) Bronze Offset ADAMS RITE 4590 DEADLATCH PADDLES AR Pull To Left AR Pull To Left AR Push To Left AR Push To Left AR Pull To Right AR Pull To Right AR Push To Right AR Push To Right How To Order Paddles Pull to Left Pull to Right , , MS MS+1890 Push to Left Push to Right , , MS MS+1890 EXAMPLE: Door Thickness 00 1¾ / ¼ - 2½ 03 2¾ ¼ Finish 628 Satin Alum. 313 Bronze Anod. 335 Black Anod. US3 Brass 4591 US26 Chrome (4591) Phone: (612) page 23 Fax: (612)

25 ADAMS RITE ALUMINUM DOOR HARDWARE DEADLOCKS 4901 MS1850S Series AR MS1850S /8 AR MS1852S /32, L.H. AR MS1852S /32, R.H. AR MS1852S /8, L.H. AR MS1852S /8, L.H. AR MS1852S /8, R.H. AR MS1852S /8, R.H. AR MS1852S /2, L.H. AR MS1852S /2, R.H. (With Short Bolt) AR 1852S /32 AR 1852S /8 y Snap-In Nylon Insert Snap-In Nylon Insert 4901 AND 4902 Deadlatch Strikes AR Large AR Large AR Radius AR Radius AR Small AR Small AR Rad. Short FINISH: Satin aluminum 130, bronze 121 or black 119. AR L.H., Center AR L.H., Center AR R.H., Center AR R.H., Center Door Hand 5 LH or LHR 6 RH or RHR **Assuming handle on interior of doors. How To Order 4568 Handles Door Thickness* 01 1¾ ¼ - 2½ 03 2¾ ¼ **For handle without cam plug for use with MS+1890 in 1¾ door, specity -14. EXAMPLE: Finish 130 Satin Alum. 121 Bronze 119 Black MS1850S Series (Longbolt) Faceplate Shape MS1850S Flat MS1851S Radius MS1852S Bevel MS1851SW Rad. w/w seal Backset 1 7/8 2 31/ / /2 EXAMPLE: MS1852S Door Hand 15 LH or RHR 16 RH or LHR 10 Non-handed* *Any flat or radium face, except Schoolhouse How To Order Finish 628 Satin Alum. 313 Bronze Alum. 335 Black Anod. LMB-03 Threaded LMB-05 Threaded " Wide x 2-3/8" 1-3/8" Wide x 1-1/2" LMB-03 Universal Mounting Bracket Universal mounting bracket for use in hollow metal or aluminum doors and frames. LMB- 03 has different offsets at each end to allow adjustment for an assortment of installations. Holes are tapped and supplied with four x 1/2 phillips flat mounting screws. Packed two brackets and four screws per set. Part Number MM LMB-03 Bracket Tapped MM LMB-05 for 1-1/4 x 4-7/8 ASA strikes 4580 Cam Discs Secured in latch body by cylinder setscrew, plug is also rigidly tied to handle escutcheon by hardened steel pins. Handing can be reversed by removing a spring clip, flopping the cam and replacing the clip. AR L.H. AR R.H. Phone: (612) page 24 Fax: (612)

26 ALUMINUM DOOR HARDWARE USCAN Phone: (612) page 25 Fax: (612)

27 Deluxe Through-Glass Video/DVD Drop SPECIFICATIONS: Material: Stainless Steel; Steel; Plastic Finishes: Brushed Stainless Steel (Face Plate Only); Black ABS Plastic (Rear Chute) Glass Fabrication: Cut-out Required Instructions and Template Included Full Size Opening Directs Video Tapes and DVD s to Collection Bin Brushed Stainless Steel Face Plate Installs in 1/4" (6 mm) Glass The The unit Deluxe fits through Through-Glass a cut-out in Video/DVD the glass and Drop clamps allows customers together by to tightening return videos four screws. and DVD s Brushed after stainless business steel hours while maintaining store security. The unit fits face plate has an 8-1/2 (216 mm) wide x 2 (51 mm) high through a cut-out in the glass and clamps together by tightening deposit slot four backed screws. by a Brushed spring loaded stainless flap that steel helps face plate reduce has air an infiltration. 8-1/2" (216 A detachable mm) wide rear x 2" chute (51 mm) coverhigh deposit provides slot additional backed security, by a spring and has loaded a removable flap that spring helps reduce loaded air bar infiltration. the base Afor detachable attachment rear of the chute vinyl cover slide, to gently and safely direct video tapes and DVD s to a loaded bar at the base for attachment of the vinyl slide collection bin. (not included) provides additional security, and has a removable spring to gently and safely direct video tapes and DVD s to a collection bin (not included). Removable Thumb Rear Chute Screw MANUFACTURED IN THE USA BY C.R. LAURENCE An ISO9001:2000 Certified Company Part # Description Description Slot Slot Size Size (W x (W H) x H) DVD82 Video/DVD Video/DVD Drop Drop 8-1/2 8-1/2 x 2 (216 x 2 x ( mm) x 51 mm) 8" (203 mm) 9-1/2" (241 mm) Side View Glass 4-3/4" (121 mm) 1/8" (3 mm) Stainless Steel Clamps to Glass 8-1/2" (216 mm) 11" (279 mm) Front View 2" (51 mm) No-Draft Mail Slots Energy Efficient, Ideal for All Climates Internal Brush Strip for Added Insulation and Privacy Telescopic Sleeve Allows for a Perfect Fit on 'All-Glass' Doors From 1/4" to 1/2" (6 to 12 mm) Thick Available in Two Popular Finishes, Satin Anodized and Duranodic Bronze No-Draft Mail Slots are designed to keep out the weather as well as dust and dirt. The No-Draft Mail Slot has two door flaps, both spring loaded and weatherstripped, as well as an internal brush strip for greater insulation and privacy. Both the external and internal flaps open to 135 degrees for easy access. Both have durable nylon torsion rods instead of springs to keep both flaps tightly shut. Made from high impact ABS plastic and anodized aluminum, No-Draft Mail Slots will not rust or tarnish over time. 135 Degrees RTV408C Silicone Sealant 135 Degrees Interior Exterior D A C B Exterior Side Interior Side CAT. NO. FINISH OVERALL SIZE (A x B) OPENING SIZE (C x D) Finish Overall Size (A x B) Opening Size (C x D) NDMS12A Satin Anodized 3" x 11-1/2" (76 x 292 mm) NDMS13A NDMS12DU Satin Duranodic Anodized Bronze 3" x 11-1/2" 3 x 1 1-1/2 (76 x 292 (76 x mm) 292mm) 1-7/16 x 9-3/4 (37 x 248MM NDMS13BL Duranodic Bronze 3 x 1 1-1/2 (76 x 292mm) 1-7/16 x 9-3/4 (37 x 248MM 1-7/16" x 9-3/4" (37 x 248 mm) 1-7/16" x 9-3/4" (37 x 248 mm) Telescopic inner and outer sleeves allow for variations in door thicknesses End View Door Glass 1/4" to 1/2" (6 to 12 mm) Thick Glass SPECIFICATIONS: Material: Extruded Aluminum Finishes: Satin Anodized or Duranodic Bronze Glass Fabrication: Cut-Out Required Template and Instructions Included Phone: (612) page 26 Fax: (612)

28 Deluxe Mail Slots With Glass Channel Bar MANUFACTURED IN THE USA BY C.R. LAURENCE An ISO9001:2000 Certified Company SPECIFICATIONS: Material: Extruded Aluminum Finishes: Satin Anodized or Duranodic Bronze Glass Fabrication: Cut-Out Required Satin Anodized Duranodic Bronze All Mechanisms Totally Concealed Available With or Without a Latch Made to Fit 1/4" (6 mm) Thick Glass Spring Tension Closing Eliminates Dust and Water Penetration A C 1/4" (6 mm) B D Latched Unlatched W/O LATCH CAT. NO. 900A 900DU 922A 922DU 933A 933DU WITH LATCH CAT. NO. FINISH OVERALL SIZE (A x B) OPENING SIZE (C x D) 905A 905DU 925A 925DU 935A 935DU 9412A 9412DU 9414A 9414DU 9416A 9416DU 9418A 9418DU 9514A 9514DU 9516A 9516DU 9518A 9518DU Satin Anodized Duranodic Bronze Satin Anodized Duranodic Bronze Satin Anodized Duranodic Bronze Satin Anodized Duranodic Bronze Satin Anodized Duranodic Bronze Satin Anodized Duranodic Bronze Satin Anodized Duranodic Bronze Satin Anodized Duranodic Bronze Satin Anodized Duranodic Bronze Satin Anodized Duranodic Bronze 2-5/8" x 9-5/8" (67 x 244 mm) 2-5/8" x 9-5/8" (67 x 244 mm) 2-5/8" x 12-5/8" (67 x 308 mm) 2-5/8" x 12-5/8" (67 x 308 mm) 2-5/8" x 16" (67 x 406 mm) 2-5/8" x 16" (67 x 406 mm) 4-1/2" x 12" (114 x 305 mm) 4-1/2" x 12" (114 x 305 mm) 4" x 14" (102 x 356 mm) 4" x 14" (102 x 356 mm) 4" x 16" (102 x 406 mm) 4" x 16" (102 x 406 mm) 4" x 18" (102 x 457 mm) 4" x 18" (102 x 457 mm) 5" x 14" (127 x 356 mm) 5" x 14" (127 x 356 mm) 5" x 16" (127 x 406 mm) 5" x 16" (127 x 406 mm) 5" x 18" (127 x 457 mm) 5" x 18" (127 x 457 mm) 1-11/16" x 8-5/8" (43 x 219 mm) 1-11/16" x 8-5/8" (43 x 219 mm) 1-11/16" x 11-1/8" (43 x 283 mm) 1-11/16" x 11-1/8" (43 x 283 mm) 1-11/16" x 15" (43 x 381 mm) 1-11/16" x 15" (43 x 381 mm) 3-9/16" x 11" (90 x 279 mm) 3-9/16" x 11" (90 x 279 mm) 3-1/16" x 13" (78 x 330 mm) 3-1/16" x 13" (78 x 330 mm) 3-1/16" x 15" (78 x 381 mm) 3-1/16" x 15" (78 x 381 mm) 3-1/16" x 17" (78 x 432 mm) 3-1/16" x 17" (78 x 432 mm) 4-1/16" x 13" (103 x 330 mm) 4-1/16" x 13" (103 x 330 mm) 4-1/16" x 15" (103 x 381 mm) 4-1/16" x 15" (103 x 381 mm) 4-1/16" x 17" (103 x 432 mm) 4-1/16" x 17" (103 x 432 mm) Inside View Side View Phone: (612) page 27 Fax: (612)

29 ALUMINUM DOOR HARDWARE RCI - RUTHERFORD CONTROLS 90 Offset Pull Pull No. CTC /2 Available in 313 = bronze and US28 = clear Many other sizes and styles available. Single Projection Push Bar Pull No. CTC 1565 Specify Available in 313 = bronze and US28 = clear Many other sizes and styles available. If you do not see the part you need, please send a sample or call our customer service department. Phone: (612) page 28 Fax: (612)

30 ELECTRIC STRIKES ADAMS RITE ELECTRIC STRIKES Body Kit Faceplate Kit Size Use With: 7100 = FPK00 1-1/4 x 4-7/8 Round Corners AR latch & cylindrical 5/8 latch throw 7101 = FPK01 1-1/4 x 4-7/8 Radius AR latch & cylindrical 5/8 latch throw 7140 = FPK40 1-1/4 x 4-7/8 Square Corners AR latch & cylindrical 5/8 latch throw 7130 = FPK30 1-1/4 x 6-7/8 Round Corners AR latch & cylindrical 5/8 latch throw 7131 = FPK31 1-1/4 x 6-7/8 Radius AR latch & cylindrical 5/8 latch throw 7110 = FPK10 1-7/16 x 7-15/16 Round Corners AR latch & cylindrical 5/8 latch throw 7111 = FPK11 1-7/16 x 10-1/4 Round Corners AR latch & cylindrical 5/8 latch throw 7160 = FPK00 1-1/4 x 4-7/8 Round Corners Mortise latches up to 3/4 latch throw 7170 = FPK40 1-1/4 x 4-7/8 Square Corners Mortise latches up to 3/4 latch throw 7300 = FPK00 1-1/4 x 4-7/8 Round Corners AR latch & cylindrical 5/8 latch throw 7340 = FPK40 1-1/4 x 4-7/8 Square Corners AR latch & cylindrical 5/8 latch throw 7330 = FPK30 1-1/4 x 6-7/8 Round Corners AR latch & cylindrical 5/8 latch throw = FPK10 1-7/16 x 7-15/16 Round Corners AR latch & cylindrical 5/8 latch throw = FPK11 1-7/16 x 10-1/4 Round Corners AR latch & cylindrical 5/8 latch throw MODULAR ELECTRIC STRIKES 7100 Series: Grade 1 Field Reversable From Fail-Safe To Fail-Secure 7300 Series: Compact Case Fits Jamb Sections as shallow as 1-1/15 Field Reversable From Fail-Safe To Fail-Secure BODY KITS AR 7103A-310 1/2 12DC 24AC STD/Fail Secure AR 7103A-315 1/2 12DC FSA Fail Safe AR 7103A-340 1/2 12AC STD/Fail Secure AR 7103A-410 1/2 16DC STD/Fail Secure AR 7103A-440 1/2 16AC STD/Fail Secure AR 7103A-510 1/2 24DC STD/Fail Secure AR 7103A-515 1/2 24DC FSA Fail Safe AR 7103A-517 1/2 24DC M/FSA Monitor/Fail Safe AR 7103A-519 1/2 24DC M/FSE Monitor/Fail Secure AR 7173A-310 3/4 12DC STD/Fail Secure AR 7173A-510 3/4 24DC STD/Fail Secure AR 7303A-310 Compact 12DC STD/Fail Secure AR 7303A-510 Compact 24DC STD/Fail Secure FACEPLATE KITS AR FPK /7160/7300 Dk. Bronze Anod. AR FPK /7160/7300 Black Anod. AR FPK /7160/7300 Bright Brass AR FPK /7160/7300 Satin Alum. (Clear) AR FPK Dk. Bronze Anod. FACEPLATE KITS AR FPK Black Anod. AR FPK Satin Alum. (Clear) AR FPK Bright Brass On Steel AR FPK Oil-Rubbed Bronze AR FPK Satin Chromium AR FPK Oil-Rubbed Bronze AR FPK Satin Chromium AR FPK Dark Bronze Anodized AR FPK Black Anodized AR FPK Satin Alum. (Clear) AR FPK Dark Bronze Anodized AR FPK Black Anodized AR FPK Satin Alum. (Clear) AR FPK /7170/7340 Dark Bronze Anod. AR FPK /7170/7340 Black Anodized AR FPK /7170/7340 Bright Brass AR FPK /7170/7340 Satin Alum. (Clear) AR FPK Retrofit Dark Bronze Anodized AR FPK Retrofit Satin Alum. (Clear) Phone: (612) page 29 Fax: (612)

31 ELECTRIC STRIKES ADAMS RITE ELECTRIC STRIKES R SERIES Complete AR DC AR DC AR DC/24AC AR DC/24AC 7108 SERIES Complete AR DC/24AC AR DC/24AC 3/32 AR Fire-Rated Remote electrical control of any door equipped with cylindrical (key-in-knob/lever) type latchsets. Electrical actuation unlocks strike jaw, releasing latchbolt, so door can be opened without operating latch itself. Extremely compact mechanism fits into jab sections as shallow as 1-21/32. 71R1-3/4 FACE Rim Panic Devices AR 71R DC CONT/INT AR 71R DC CONT/INT AR 71R AC/INT 12DC/ CONT AR 71R AC/INT 12DC/ CONT 71R2 For Latch: Electric Strike 7100 Alum 7101 Radius Stile 7110 Alum/Wood 7111 Alum/Wood 7130 Alum 7131 Radium Stile 7140 Hollow Metal/Wood For Latch: Key-in-Knob Electric Strike For Jamb 7100 Alum 7140 Steel/Wood For Latch: Mortise How To Order 7100 Electric Strikes Adams Rite 4500 & 4700Series For Jamb Electric Strike For Jamb 7160 Alum 7170 Steel/Wood For Latch: Adams Rite 8300 & 8400 Series Exit Devices Electric Strike For Jamb 7108 Alum 7128 Hollow Metal/Wood For Latch: Rim Exit Devices Electric Strike 71R1 71R2 by Others* For Jamb Alum/Hollow Metal/Wood Alum Current & Duty 1 DC Continuous or Intermittent 2 AC Continuous (DC strike packed w/4603 rectifer) 4 AC Intermittent Lip Extension (Dim. A ) (Door Centerline to Jam Edge) or less Voltage 3 12 Volt 4 16 Volt 5 24 Volt EXAMPLE: 71XX Features 0 Std/Fail-Secure 5 Fail-Safe 7 Monitor/Fail-Safe 9 Monitor/Fail-Secure Finish 628 Satin Alum 605 Brass Alum 612 Satin Bronze 613 Oil Bronze 313 Bronze Anod. 335 Black Anod. 119 Black (Ritecoat) 121 Dk. Bronze (Ritecoat) 130 Silver (Ritecoat) 626 Satin Chrome *71R1: For use with Von Duprin, Precision, Monarch, American Device (available in RC119, RC121, or RC130 only) 71R2-1/2 FACE Rim Panic Devices AR 71R DC CONT/INT AR 71R DC CONT/INT AR 71R AC/INT 12DC/ CONT AR 71R AC/INT 12DC/ CONT SOLENOIDS NEW STYLE 7000 SERIES STRIKES AR VAC INT AR VAC INT AR DC Cont./24 AC INT AR VDC Cont. AR VDC Cont. y y Phone: (612) page 30 Fax: (612)

32 FULL SURFACE CONTINUOUS HINGES 25/32" (20 mm) Available in Satin Anodized and Dark Bronze Anodized Finishes 3-3/16" (81 mm) 1-23/32" (43.7 mm) 25/32" (20 mm) 1-7/16" (36.5 mm) 25/32" (20 mm) 19/32" (15.1 mm) 27/64" (10.7 mm) Door 1/32" (0.8 mm) Jamb Hinge length Self tapping screws and sexbolts included. Custom length hinges available special order 21 Solid Aluminum bar stock. E0017 used to protect your glass from breaking. 1 1/2 x 1/2. Available in bronze or clear. 12 H bar. Available in bronze or clear. # /16" 1" Used to split glass. Can be cut to size Phone: (612) page 31 Fax: (612)

33 HINGE COLOR CHART Bright Brass US3 Satin Brass US4 Antique Brass US5 Antique Bronze Oiled US10B Satin Nickel US15 Bright Chrome US26 Satin Chrome US26D Satin Stainless US32D Prime Coat Paint USP Dark Bronze L2 Medium Bronze L3 Phone: (612) page 32 Fax: (612)

34 HINGES Description: Full Mortise > Five Knuckle > Plain Bearing > Square Corner Description: Removable Pin Material: Steel with Steel pin Reversible Packaging: 2 pack with screws Square Corners 3 1/2 x 3 1/2 Available in USP US3 US4 US5 US15 US26 US26D Description: Full Mortise > Five Knuckle > Plain Bearing > Round Corners with 1/4 Radius Description: Round Corners (1/4 radius) Material: Steel with Steel pin Removable pin Packaging: 2 pack with screws Reversible Bulk without screws 3 1/2 x 3 1/2 Available in USP US3 US4 US5 US15 US26 US26D Description: Full Mortise > Five Knuckle > Plain Bearing > Round Corners with 5/8 Radius Description: Round Corners (5/8 radius) Material: Steel with Steel pin Removable pin Packaging: Boxed one pair (2 each) Reversible with screws 3 1/2 x 3 1/2 Available in USP US3 US4 US5 US15 US26 US26D Phone: (612) page 33 Fax: (612)

35 HINGES Description: Full Mortise > Five Knuckle > Plain Bearing > Square Corner Description: Square Corners Material: Steel with Steel pin Removable pin Packaging: 2 pack with screws Reversible x 4 Available in USP US3 US4 US5 US15 US26 US26D Description: Full Mortise > Five Knuckle > Plain Bearing > Round Corners with 1/4 Radius Description: Round Corners (1/4 radius) Material: Steel with Steel pin Removable pin Packaging: 2 pack with screws Reversible Bulk without screws RC x 4 Available in USP US3 US4 US5 US15 US26 US26D Description: Full Mortise > Five Knuckle > Plain Bearing > Round Corners with 5/8 Radius Description: Round Corners (5/8 radius) Material: Steel with Steel pin Removable pin Packaging: Boxed one pair Reversible (2 each) with screws RC x 4 Available in USP US3 US4 US5 US15 US26 US26D Phone: (612) page 34 Fax: (612)

36 BALL BEARING HINGES Description: Ball Bearing > Standard Weight Description: Two ball bearings Five knuckles Square corner Material: Fasteners: Steel with Steel pin All machine and all wood 4 1/2 x 4 1/2 Available in USP US3 US4 US26 US26D Description: Full Mortise Hinges > Standard Weight > Five Knuckle > Ball Bearing Description: Two ball bearings Non-rising removable pin with button tip and plug 1/4 radius corner Material: Steel with Steel pin 4 1/2 x 4 Available in L2-US26D Description: Heavy Weight > Ball Bearing Description: Four ball bearings Square corner Material: Steel with Steel pin 4 1/2 x 4 1/2 Available in USP US3 US15 US26 US26D Phone: (612) page 35 Fax: (612)

37 SPRING HINGES Description: Full Mortise Hinges > Springs > Single Acting > Square Corners Application: For automatic closing. Meets codes for hotels, motels, institutions, and commercial buildings. EC /2 x 4 1/2 Available in USP US3 US4 US10B US15 US26 US26P Description: Full Mortise Hinges > Springs > Single Acting > Round Corners with 1/4 Radius Application: For automatic closing. Meets codes for hotels, motels, institutions, and commercial buildings x 4 Available in USP US3 US4 US10 US15 US26D Description: Full Mortise Hinges > Springs > Single Acting > Round Corners with 5/8 Radius Application: For automatic closing. Meets codes for hotels, motels, institutions, and commercial buildings x 4 Available in USP US3 US4 US10 US26D Phone: (612) page 36 Fax: (612)

38 Description: Reinforcing Pivot REINFORCING PIVOTS Application: - For 4 1/2 (114 mm) wide hinges - Handed (Specify when ordering) THRESHOLDS Fire Rated Handicap Accessible Catalog Number: S2O4A Description: S24OA - Mill Aluminum Saddle Threshold, 1/2 x 4 Available up to 7 wide Fire Rated Handicap Accessible Catalog Number: S404A Description: S4O4A - Mill Aluminum Saddle Threshold, 1/4 x 4 Available up to 8 wide Fire Rated Handicap Accessible Catalog Number: S407A Description: S47OA - Mill Aluminum, Half Saddle Threshold, 1/2 x 2 Available in 2-2 7/ / Oak Mini-Threshold #30KMT-36 3/4 x 1-11/16 3 1/2 801V-36 Phone: (612) page 37 Fax: (612)

39 SWEEPS 15/16 1-1/8 967C and 967D Anodized Clear and Anodized Brown Aluminum Door Sweep Weatherstrip Brush Insert, 2-1/16 x 3/8 Part Number - 967C and 967D RE 967C-36 Door Sweep RE 967C-42 Door Sweep RE 967D-36 Door Sweep RE 967D-42 Door Sweep 1-3/4 806C and 806D Anodized Clear and Anodized Brown Aluminum Door Sweep Weatherstrip Vinyl Insert, 1-3/4 x 1/4 Part Number - 806C and 806D RE 806C-36 Door Sweep Vinyl RE 806C-42 Door Sweep Vinyl RE 806D-36 Door Sweep Vinyl RE 806D-42 Door Sweep Vinyl Vinyl U-Shaped Door Bottom w/vinyl Fins MD05991 MD06528 durable vinyl door bottom soft vinyl fins seals top of threshold and sill great for steel doors fits most 1 3/4 doors 36 Brown 36 White 17/32 #DSW28 #DSW30 #DSW Wood Door Sweep 3-0 Wood Door Sweep 3-6 Wood Door Sweep 5/16 #DSR Replacement Sweep Phone: (612) page 38 Fax: (612)

40 METAL KICKPLATES US Max. Max. Stock Standard Sizes Select Finish BHMA Gauge Thickness Code Height Width 72 Hour Sizes Quick Ship Aluminum Clear Anodized US " 48" 8 x 34, 10 x 34, 12 x 34 Antique Brass US " 48" -- Polished Brass US " 48" 8 x 34, 10 x 34, 12 x 34 Satin Brass US " 48" -- Polished Bronze US " 48" -- Oil-Rubbed Bronze US10B " 48" 8 x 34, 10 x 34 Satin Bronze US " 48" 8 x 34, 10 x 34, 12 x 34 Polished Chrome US " 48" -- Satin Chrome US26D " 48" -- Satin Stainless Steel US32D " 48" 8 x 34, 10 x 34, 12 x 34 Polished Stainless Steel US " 48" -- Alum. Bright. Brass Look " 48" -- Width of Plates: : Push Side: 2" less than door width. Pull Side: 1-1/2" less than door width. Kydex Kick Plates Kydex is an extremely durable, fire-retardant, acrylic/pvc alloy. The Kydex sheet is widely used in areas subject to high traffic and abuse where the exceptional impact, gouge and scratch resistance of a Kydex surface minimizes damage and related maintenance costs. Kydex features excellent cleanability and chemical resistance, which provide maximum protection from stains and graffiti. Kydex is available in 33 colors. Standard colors are black, gray, brown, or beige. Other colors are special order. PUSH PLATES Kydex Finish Thickness Min. Height Max. Height Min. Width Max. Width.060,.080, Kydex 4" 48" 22" 96".125 Click here to view the Kydex standard color chart (Adobe Acrobat PDF) Square Corner Round Corner Size Metal Finishes 3" x 12" 200A 210A 3 " x 15" 200D/300D 210D/310D 4" x 16" 200F/300F 210F/310F 6" x 16" 200H/300H 210H/310H 7 " x 15" 200J/300J 210J/310J 8" x 16" 200K/300K 210K/300K Aluminum-US28 Antique Brass-US5 Polished Brass-US3 Satin Brass-US4 Polished Bronze-US9 Oil-Rubbed Bronze- US10B Satin Bronze-US10 Polished Chrome-US26 Satin Chrome-US26D Satin Stainless Steel- US32D Polished Stainless Steel-US Series Metal ANSI# 200 Series.050 Thickness Metal(16 ga. B & S) J Series.125 Thickness Metal(8 ga. B & S) J304 Phone: (612) page 39 Fax: (612)

41 PULL PLATES Plate Size 3 1/2 x D x 523B 200D x 559A 200D x D x 5 P Aluminum-US28 Antique Brass-US5 Polished Brass-US3 Satin Brass-US4 Polished Bronze-US9 Oil-Rubbed Bronze-US10B 1755 Metal Finishes DOOR VIEWERS Satin Bronze-US10 Polished Chrome-US26 Satin Chrome-US26D Satin Stainless Steel-US32D Polished Stainless Steel-US32 Description: 160º Door Viewer Application: For doors up to 2 1/8 (54 mm) thick, adjustable Notes: Requires 1/2 (12.5 mm) hole for viewer. Available in US3 US4 US5 US15 US26 US26D 1756 Description: 200º Door Viewer Application: For doors up to 2 1/8 (54 mm) thick, adjustable Notes: Requires 9/16 (14.3 mm) hole for viewer. Available in US3 US4 US5 US15 US26 US26D DV90 Brass Door Viewer, 160, 1/2 Bore, Plastic Lens, For Doors 1 3/8 To 2 Thick Available in US3 US5 US10B US15 US26 US26D DJ BF-161-BP Brass Plated DJ BF-161-PC Covers up to 2 ⅛ hole 2 ⅝ Diameter Prime Coat DJ BF-161-SL BF-161 Silver Coated 8715 Swing Bar Door Guard For Wood or Metal Doors PB 8707-PB Chain Door Guard For Wood or Metal Door with Extra Long Screws. (Carded) 8708 Keyed Chain Door Guard Locks from Inside or Outside, for Wood or Metal Doors with Extra Long Screws. (Carded) KA Key # SURFACE BOLT Length: #275D = 8 or #276D = 12 Height X Width: 1/4 x 3/4 (6 mm x 19 mm) Throw: 1 (25 mm) Material: Steel Phone: (612) page 40 Fax: (612)

42 DOOR STOPS HDFDSH66 Base Diameter: 2 1/4 Projection: 3 5/8 Keeper: 13/16 x 1 1/2 CFS20 Base Diameter: 2 7/16 Overall Height: 3 HDWDS99 Base Diameter: 2 1/4 Projection: 3 13/16 Keeper: 13/16 x 1 1/2 CWS18 Diameter: 2 7/16 Projection: 3 5/8 WB26 Diameter: 2 1/2 Projection: 1 3/16 CONWB42 Diameter: 2 1/2 Projection: 1 3/16 DSLP4 Diameter: 1 3/4 Base Thickness: 1/8 Overall Height: 1 DH25 Arm Length: 4 HP95 HDFS3 Stop Length: 3 SBRS3 Stop Length: 3 Available in US3 US10B US15 US26 US26D Phone: (612) page 41 Fax: (612)

43 DOOR ACCESSORIES 1/2" Metal Frame Mounted Silencer J4566 CRL Sex Bolt Sex Bolt Sets Sets Four Per Pack Four Per Pack CAT. NO. DCSBA DCSBBRZ DCSBA DCSBBRZ Finish FINISH Aluminum Aluminum Dark BRonze Dark Bronze 1/8" WALL PROTECTORS Made of high impact material that can be painted or papered. Use to repair larger areas of wall damage. Foam adhesive on back absorbs shock. 1/4" Total thickness. Washable. 3 Diameter Finish White OW Off White 5 Diameter Finish White IV COR7G-US26D IV COR9G-US26D IV FB31P-US32D IV FB458-US26D FB31P 458 Z COR7G - 7 Projection Use on pairs of doors with astragal on active door up to 4. With astragal, inactive door up to 3 4. With astragals, both doors up to COR9G - 9 Projection Use on pairs of doors with astragal on active door over 4. With astragal, inactive door over 3 4. With astragals, both doors over FB31P Pair - Top and Bottom Bolts / Automatic Flush Bolts Metal Doors Both bolts are nonhanded, but are not identical. The top bolt has no spring tension, resulting in lower actuation force with a smoother operation. Body Size: 1 Wide x 6-3/4 Long x 2 Deep UL Listed 3 hours on 8 0 x 10 0 Opening FB458 - Top or Bottom Bolt / Manual Flush Bolt Metal Doors Simplifi ed installation in metal frames. Round bolt head requires only a punched hole. Use of strike optional. Special design of guide and fl at sided bolt tip to prevent bolt rotation. Body Size: 1 Wide x 6-3/4 Long x 1-1/8 Deep UL Listed 3 hours on 8 0 x 10 0 Opening Multi-Function 10 Series Surface Mount Overhead Stops and Holders new Surface Mounted for New or Retrofit Installations FEATURES AND SPECIFICATIONS Non-Handed Slide Track Design Multi-Function Slider for Field Selection of Hold Open, Friction Stay or Stop Only Degree of Opening Fully Adjustable 110 Degree Maximum Opening Heavy Shock Absorber Spring Provides 5 to 7 Degree Compression Before Reaching a Dead-Stop Non-Metal Slide and Shock Block Furnished With Fasteners for Both Wood or Metal Door and Frame Recommended for Medium Traffic, Medium Weight Doors Optional Mounting Bracket CAT. NO CAT. NO SS 10346SA 10346DU 10446SS 10446SA 10446DU 10546SS 10546SA 10546DU OFFSET PIVOTS/HINGES 30-1/16" to 36" (764 to 914 mm) 36-1/16" to 42" (916 to 1067 mm) 42-1/16" to 48" (1068 to 1219 mm) DOOR OPENING TYPE CENTER-HUNG PIVOTS 32-1/16" to 38" (814 to 965 mm) 38-1/16" to 45" (967 to 1143 mm) 45-1/16" to 48" (1145 to 1219 mm) FINISH Satin Stainless Painted Aluminum Painted Dark Bronze Satin Stainless Painted Aluminum Painted Dark Bronze Satin Stainless Painted Aluminum Painted Dark Bronze NOTE: Standard 10 Series Overhead Stops and Holders are shipped for Push Side Mounting. For Pull Side Mounting, Order Cat. No Optional Mounting Bracket. Phone: (612) page 42 Fax: (612)

44 DOOR CLOSERS NORTON NO Phone: (612) page 43 Fax: (612)

45 DOOR CLOSERS AMERICAN EAGLE Standard 3100 series closer shipped with regular arm, a shaft cover, and self reaming and tapping screws. Non-sized (1-5) cylinder is adjustable for interior doors to 4 6 and exterior doors to 3 6. Closer mounts hinge side, top jamb and parallel arm on either right or left swinging doors. Mounts to most common commercial footprint (3/4 x 9 1/6 ). Closer meets ADA requirements. REGULAR ARM - RA Complete arm assembly with stamped steel main arm and flat form style arm and shoe assembly. (#319003)** PARALLEL ARM HO BRACKET - PAHO Bracket used when mounting parallel arm with hold open arm assembly. (#319022)*** 7100 SERIES DOOR CLOSER DROP PLATE - DP For top jamb mount with limited overhead clearance or to provide clearance for a surface applied stop/holder. Can also be used parallel arm with a narrow top door rail. (#319009) PARALLEL ARM BRACKET - PA Bracket used when mounting parallel arm with regular arm non-hold open assembly. (#319001)** The American Eagle 7100 Series features a full rack and pinion construction, heavy duty cast iron closer body, forged steel main arm and full architectural cover. Hydraulic control is accomplished through separate hex key non-critical sweep, latch and backcheck valve adjustments. A Backcheck positioning valve provides consistent backcheck range on parallel arm applications. Optional delayed action (in lieu of backcheck) is effective from maximum opening to approximately 70 degrees. Closers are non-handed, suitable for regular, top jamb and parallel arm applications and come with fasteners for wood and metal doors and frames. Sex nuts and bolts are also furnished standard. Spring adjustment is provided throughout a range of sizes 1-6 and is capable of meeting barrier free force restrictions. All products carry a 25-year manufacturer s limited warranty. The 7100 performs to the requirements of ANSI A156.4 Grade 1. REGULAR ARM - RA Complete arm assembly with stamped steel main arm and flat form style arm and shoe assembly. (#719003)** PARALLEL ARM HO BRACKET - PA Bracket used when mounting parallel arm with regular arm non-hold open assembly. (# )*** PARALLEL ARM DROP PLATE - DPPA For parallel arm mount with narrow top door rail. (#719018) FULL PLASTIC COVER - FC Full plastic cover, non-handed (#719006) Phone: (612) page 44 Fax: (612)

46 DOOR CLOSERS 4040 SERIES CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) The 4041 includes the LCN FAST Power Adjust, a revolutionary visual indicator for Spring Power Adjustment. INSTALLATION ACCESSORIES CORNER BRACKET, For doors where top jamb or parallel arm mounting cannot be used (consult factory). PLATE, Required for hinge side mount where top rail is less than 3 3/4 (95 mm). Plate requires minimum 2 (51 mm) minimum top rail. PLATE, G Locates top jamb mounted closer fl ush with top of head frame face in fl ush ceiling condition. Plate requires 1 3/4 (44 mm) minimum head frame. PA PLATE, PA Required for parallel arm mounting where top rail is less than 5 1/2 (140 mm), measured from the stop. Plate requires 2 (51 mm) minimum top rail. TJ PLATE, TJ Centers top jamb mounted closer vertically on head frame where face is less than 3 1/2 (89 mm). Plate requires 1 3/4 (44 mm) minimum head frame. LCN 4040 SUPER SMOOTHEE SERIES The 4040 SUPER SMOOTHEE is LCN s most fl exible heavy duty closer designed for institutional and other rugged high traffi c applications. Ten Million Cycles Cast Iron Forged Steel Main Arm Double Heat Treated Steel Pinion All Weather Fluid Non-Handed LCN Fast Power Adjust Fast & Accurate Installation UL & ULC Listed FEATURES Standard 4040 series closer shipped with regular arm, standard plastic cover, and self reaming and tapping screws. Non-sized cylinder is adjustable for interior doors to 5 0 and exterior doors to 4 0. Closer mounts hinge side, top jamb, and parallel arm w/pa Shoe on either right or left swinging doors. Closers to meet ADA requirements. UL and ULC listed for self-closing doors without hold-open. Tested and certifi ed under ANSI Standard A156.4, grade one. TABLE OF SIZES 4041 cylinder is adjustable from size 1 through size 6 and is shipped set to size 3. Closing power of 4040 series closers may be adjusted 50%. Exterior (And Vestibule) Door Width 24 30" 36" 42" 48" 610mm 762mm 914mm 1067mm 1219mm Indicates recommended range of door width for closer size. Interior Door Width 24 34" 38" 48" 54" 60" 610mm 864mm 965mm 1219mm 1372mm 1524mm size 3 size 4 size 5 size 6 size 2 size 3 size 4 size 5 size 6 *4041 Minimum Door *4041 Minimum Door * Adjustable Size 1 thru 6. Width Width 4040 Door Closers and Installation Accessories Part No. Description Finish LC 4041-CUSH-ALUM Closer-Adj / 1-6 Aluminum LC 4041-CUSH-DKBRZ Closer-Adj / 1-6 Dark Bronze LC 4041-DEL-REG-ALUM Closer-Adj/1-6 Delay Action Aluminum LC 4041-H-ALUM Closer-Adj/1-6 Hold-open Aluminum LC 4041-H-DKBRZ Closer-Adj/1-6 Hold-open Dark Bronze LC 4041-HCUSH-ALUM Closer-Adj/1-6 Hold-open Aluminum LC 4041-HCUSH-DKBRZ Closer-Adj/1-6 Hold-open Dark Bronze LC 4041-REG-ALUM Closer-Adj / 1-6 Aluminum LC 4041-REG-DKBRZ Closer-Adj / 1-6 Dark Bronze LC 4041-RW/PA-ALUM Closer-Adj / 1-6 Aluminum LC 4041-RW/PA-DKBRZ Closer-Ext/Int Reduced Opening Force Dark Bronze LC 4041-RW/PA-TBSRT-AL Closer-Adj / 1-6 W/thru Blt Aluminum LC AL Corner Bracket Aluminum LC AL Pull Side or Top Jamb Mounting Plate Aluminum LC DKBRZ Pull Side or Top Jamb Mounting Plate Dark Bronze LC G-AL Pull Side or Top Jamb Mounting Plate Aluminum LC G-DKBRZ Pull Side or Top Jamb Mounting Plate Dark Bronze LC PA-AL Parallel Arm Mounting Plate Aluminum LC PA-DKBRZ Parallel Arm Mounting Plate Dark Bronze LC TJ-AL Mounting Plate-Top Jamb (Push Side) Aluminum LC TJ-DKBRZ Mounting Plate-Top Jamb (Push Side) Dark Bronze LC 4040XP-CUSH-AL XP Closer Adj / 1-6 Aluminum LC 4040XP-CUSH-DKBRZ XP Closer Adj / 1-6 Dark Bronze LC 4040XP-RW/PA-AL XP Closer Adj / 1-6 Aluminum LC 4040XP-RW/PA-DKBRZ XP Closer Adj / 1-6 Dark Bronze Phone: (612) page 45 Fax: (612)

47 CLOSER HARDWARE 4040 SERIES DCSBA 4040-TB/MS DCSBBRZ 4040-TB/MS4EA Thru Bolt / Machine Screw Package of 4 each. 62PA PA SHOE, PA Required for parallel arm mounting. EXTRA DUTY ARM, EDA Optional, non-handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. HOLD-OPEN EXTRA DUTY ARM, EDA Optional handed arm provides hold-open function, adjustable at the shoe. HOLD-OPEN ARM, Optional, non-handed arm mounts pull side or top jamb with shallow reveal, hold-open adjustable shoe. REGULAR ARM, Non-handed arm mounts pull side or top jamb with shallow reveal. CUSH SHOE SUPPORT, Provides anchorage for fi fth screw used with CUSH arms, where reveal is less than 3 1/16 (78 mm). BLADE STOP SPACER, Required to lower parallel arm shoe to clear 1/2 (13 mm) blade stop. ROD & SHOE, 79 Includes / Length is 6 3/8 (162 mm) LONG ROD & SHOE, 79LR Includes / Length is 8 3/8 (213 mm). ROD & SHOE, (Old Version) Includes Arm Screw 4040 Series Arms and Installation Accessories Part No. Description Finish LC EDA-AL Extra Duty Arm Aluminum LC EDA-LH-AL LH Hold-Open Extra Duty Arm Aluminum LC EDA-LH-DKBZ LH Hold-Open Extra Duty Arm Dark Bronze LC EDA-RH-AL RH Hold-Open Arm EDA Aluminum LC EDA-RH-DKBZ RH Hold-Open Arm EDA Dark Bronze LC AL Hold-Open Arm Aluminum LC DKBRZ Hold-Open Arm Dark Bronze LC CNS-AL HCush Arm Aluminum LC CNS-DKBRZ HCush Arm Dark Bronze LC AL Regular Arm Aluminum LC DKBRZ Regular Arm Dark Bronze LC CNS-AL Cush-N-Stop Arm Aluminum LC 4040-TB/MS4EA-AL Thru Bolt/Machine Screw - Pkg. of 4 Each Aluminum LC 4040-TB/MS4EA-DKBRZ Thru Bolt/Machine Screw - Pkg. of 4 Each Dark Bronze LC AL Cush Shoe Support Aluminum LC DKBRZ Cush Shoe Support Dark Bronze LC AL Blade Stop Spacer Aluminum LC DKBRZ Blade Stop Spacer Dark Bronze LC PA-AL Parallel Arm Shoe Aluminum LC PA-DKBRZ Parallel Arm Shoe Dark Bronze LC AL Cover Standard Snap-on Aluminum LC DKBRZ Cover Standard Snap-on Dark Bronze LC AL Rod & Shoe Aluminum LC LR-AL Long Rod & Shoe Dark Bronze Phone: (612) page 46 Fax: (612)

48 DOOR CLOSERS 4110 SERIES y y *PARALLEL ARM (PUSH SIDE) MOUNT The 4111 includes the LCN FAST Power Adjust, a revolutionary visual indicator for Spring Power Adjustment. *4110 HCUSH mount shown ARMS H-CUSH ARM CNS Optional handed arm provides hold-open function with templated stop/hold-open points. Handle controls hold-open function. HOLD-OPEN ARM, EDA Optional handed arm provides hold-open function, adjustable at shoe. CUSH-N-STOP ARM, CNS Optional, handed parallel arm features solid forged steel main arm and forearm with built-in stop in soffi t shoe. INSTALLATION ACCESSORIES 18 PLATE, Required for push side mount where top rail is less than 5 1/8 (130 mm), measured from the stop. Plate requires minimum 2 (51 mm) minimum top rail. LCN 4110 SMOOTHEE SERIES The 4110 SMOOTHEE is LCN s best performing heavy duty closer designed specifi cally for institutional and other rugged high traffic applications. Ten Million Cycles Cast Iron Extra Duty Forged Steel Arm Standard Double Heat Treated Steel Pinion All Weather Fluid LCN Fast Power Adjust Fast & Accurate Installation Standard/optional custom powder coat finish. UL & ULC Listed FEATURES Standard 4110 series closer shipped with EXTRA DUTY arm, standard plastic cover, FIFTH SCREW SPACER and self reaming and tapping screws. Sized cylinders adjustable for interior doors to 5 0 and exterior doors to 4 0. Non-sized cylinder adjustable for interior doors to 4 6 and exterior doors to 3 6. Closer mounts parallel arm, specify right or left swinging door cylinder meets ADA requirements. Tested and certifi ed under ANSI Standard A156.4, grade one. TABLE OF SIZES Select closer based on width of door. The spring power of non-sized 4111 cylinder is adjustable from size 1 through size 5 and is shipped set to size 3. Sized 4110 series cylinders available in size 2, 3, 4, 5, or 6. Closing power of all 4110 Series closers can be increased 50%. Indicates recommended range of door width for closer size. Exterior (And Vestibule) Door Width 28 30" 36" 42" 48" 711mm 762mm 914mm 1067mm 1219mm size 3 size 4 size 5 size 6 *4111 Minimum Door * Adjustable Size 1 thru 5. Width Interior Door Width 28 34" 38" 48" 54" 60" 711mm 864mm 965mm 1219mm 1372mm 1524mm size 2 size 3 size 4 size 5 size 6 *4111 Minimum Door * Adjustable Size 1 thru 5. Width 4110 Series Door Closers, Arms and Installation Accessories Part No. Description Finish LC 4111-CUSH-LH-ALUM Closer-Non-Sized Adjust Aluminum LC 4111-CUSH-LH-DKBRZ Closer-Non-Sized Adjust Dark Bronze LC 4111-CUSH-RH-ALUM Closer-Non-Sized Adjust Aluminum LC 4111-CUSH-RH-DKBRZ Closer-Non-Sized Adjust Dark Bronze LC 4111-EDA-LH-ALUM Closer-Non-Sized Adjust Aluminum LC 4111-EDA-LH-DKBRZ Closer-Non-Sized Adjust Dark Bronze LC 4111-EDA-RH-ALUM Closer-Non-Sized Adjust Aluminum LC 4111-EDA-RH-DKBRZ Closer-Non-Sized Adjust Dark Bronze LC 4111-HCUSH-LH-ALUM Closer-Non-Sized Adjust Aluminum LC 4111-HCUSH-RH-ALUM Closer-Non-Sized Adjust Aluminum LC CNS-LH-AL Left Hand Hold-Open Arm Aluminum LC CNS-RH-AL Right Hand Hold-Open Arm Aluminum LC EDA-LH-AL Arm-Hold Open (HEDA) Aluminum LC EDA-RH-AL Arm-Hold Open (HEDA) Aluminum LC CNS-LH-AL Left Hand Cush-N-Stop Arm Aluminum LC CNS-RH-AL Right Hand Cush-N-Stop Arm Dark Bronze LC AL Mounting Plate F/Closers Parallel Arm(Push Side) Aluminum LC DKBRZ Mounting Plate F/Closers Parallel Arm(Push Side) Dark Bronze LC CUSH-AL Mounting Plate F/Closers Parallel Arm(Push Side) Aluminum LC CUSH-DKBRZ Mounting Plate F/Closers Parallel Arm(Push Side) Dark Bronze Phone: (612) page 47 Fax: (612)

49 LATCH PROTECTORS Product No. Product Description Dimensions Finish Carriage Bolt, DJ OLP-2650-DU Washer & Cap Nut Available in 1 1/8 and 1 3/8 offset 2⅝ x 6½ x 1⅛ Duro Coated DJ OLP-2650-SL Polybagged 2⅝ x 6½ x 1⅛ Silver Coated DJ OLP-2651-DU 2⅝ x 6½ x 1⅜ Duro Coated Rivet DJ OLP-2651-SL 2⅝ x 6½ x 1⅜ Silver Coated DJ LP-211-DU Furnished with carriage bolts, washers & 3 x 11 Duro Coated acorn cap nuts for safety and strength DJ LP-211-SL Fits 2 3/4 and 2 3/8 backsets 3 x 11 Silver Coated DJ 9211-DU Product 9211 Polybagged 3 x 11 Duro Coated DJ 9211-SL 3 x 11 Silver Coated DJ PLP-211-DU For MORTISE LOCKS Solid steel pin prevents spreading of door from frame 3 x 11 Duro Coated DJ PLP-211-SL Pin is welded on back leaving no visible point of attack from outside Fits 2 3/4 and 2 3/8 backsets Polybagged 3 x 11 Silver Coated Solid steel pin prevents spreading of door DJ PMLP-211-DU from frame 3 x 11 Duro Coated Pin is welded on back leaving no visible DJ PMLP-211-SL point of attack from outside 3 x 11 Silver Coated Polybagged DJ LP-207-DU 2 ¾ x 7 Duro Coated Furnished with carriage bolts, washers & DJ LP-207-SL acorn cap nuts for safety and strength 2 ¾ x 7 Silver Coated Phone: (612) page 48 Fax: (612)

50 LATCH PROTECTORS DJ ILP-206-BP 6 Brass Plated DJ ILP-206-DU 6 version for use with key-in-knob and 6 Duro Coated deadbolt locks DJ ILP-206-SL 12 version for use with Mortise Locks, 6 Silver Coated DJ ILP-212-DU Simplex 1000 series, Alarm Lock DL-2500, 12 Duro Coated DJ ILP-212-SL DL-2700 & 3000, Card Access Systems, etc 12 Silver Coated Bolt Reversible and fi ts over cylinder - lock DJ LP-307-DU removal NOT required 2 ⅝ x7 x ⅛ Duro Coated Hand carriage bolt and rivet supplied No DJ LP-307-SL specific tools required 2 ⅝ x7 x ⅛ Silver Coated Rivet 3/8 offset Fits over cylinder - lock removal NOT Bolt DJ GLP-307-DU-LHR required 2 ⅝ x 7 x ⅛ Duro Coated Hand carriage bolt and rivet supplied DJ GLP-307-DU-RHR No specifi c tools required 2 ⅝ x 7 x ⅛ Duro Coated DJ GLP-307-SL-LHR 3/8 offset 2 ⅝ x7 x ⅛ Silver Coated Rivet Center of cylinder hole is 2 1/2 from end DJ GLP-307-SL-RHR 2 ⅝ x7 x ⅛ Silver Coated of plate AG5-A AG5-D DJ LP-312 Latch Protector Fits Adams Rite Lock for Outswing Doors. Dimensions: 2 5/8 x 12 x 1/8 Part Number DJ LP-312-DU Duro Coated DJ LP-312-SL Silver Coated AG5-A & AG5-D Aluma Guard Aluma-Guard is designed to protect aluminum framed, glass, store front doors. The AG-5 is formed from cold rolled steel that is 6-1/2 high, 3-1/2 wide & 7/64 thick. Mounting is easy with one carriage bolt in the top and a drive rivet in the bottom and can be installed with the lock still in the door. Part Number Aluminum Duranodic Powdercoat RH Shown Aluma Guard ADA DJ LP-312 The distance from the top of the plate to the center of the 7/8 diameter cylinder hole is 2-7/8. Models available for both left and right hand mounting. Finishes: Aluminum Powdercoat (A) or Duranodic Powdercoat (D) (L) Mounts on left side of door (R) Mounts on right side of door Part Number MM AG3L-A Aluma-Guard Offset MM AG3L-D Aluma-Guard Offset MM AG3R-A Aluma-Guard Offset MM AG3R-D Aluma-Guard Offset y DJ NLP Latch Protector Narrow Commercial Type for Outswing Doors Part Number DJ NLP-206-DU 1 1/2 x6 Duro Coated DJ NLP-206-SL 1 1/2 x6 Silver Coated DJ NLP-210-DU 1 1/2 x10 Duro Coated DJ NLP-210-SL 1 1/2 x10 Silver Coated of Armor on Latch/Cylinder of Out-Swinging Aluminum Framed Glass Doors. 6-7/8 4-1/8 AG1-A & AG1-D Aluma Guard Heavy gauge steel Aluma-Guard is easily installed with anchor pads and through bolts without lock removal. Dimensions: 6-7/8 H x 4-1/8 W Finishes: Aluminum Powdercoat (A) or Duranodic Powdercoat (D) j g Phone: (612) page 49 Fax: (612)

51 Sliding Glass & Screen Door Keepers PATIO DOOR HARDWARE Finish Chrome B Black Chrome Plated Narrow Mill Finish Rite Screen A /16 Mill Finish Bayform Metal Wright Products Flush Mount Handles For Patio Doors Fit-All Flush Mount Handle Set with Nite Lock Handle Set without Key Cylinder Finish Chrome B Black W White Handle Set with Key Cylinder Finish K Chrome BK Black WK White Both Handle Sets Include: Each of 5 Cam Sizes (S,C,P,X,K), 2 Screws and Keeper Fit-All Flush Mount Handle Set without Nite Lock Handle Set without Key Cylinder Finish Chrome B Black W White Handle Set with Key Cylinder Finish K Chrome BK Black W White Both Handle Sets Include: Each of 5 Cam Sizes (S,C,P,X,K), 2 Screws and Keeper 7/8" Keyed Finish Qty / Pkg AG4501 No Black 1 AG4501K Yes Black 1 7-3/8" 6-1/2" Finish Black C Chrome With Nite Lock, S Cam and Keeper Less Key Lock Miller If you do not see the part you need, please send a sample or call our customer service department. Phone: (612) page 50 Fax: (612)

52 PATIO DOOR HANDLES Part # Finish Finish Chrome Chrome with with Wood Wood Handle Handle B Black with Wood Handle B Black with wood Handle Wood with Chrome Brackets Crossly Finish Finish Chrome Chrome B B Black Black W W White White Die Die Cast Cast Finish Finish Chrome Chrome with with Wood Wood Handle Handle B B Black with with Wood Wood Handle Handle W W White with Wood Handle Handle 11" 6-3/8" 2" Finish Chrome with Wood Handle B Black with wood Handle Finish Chrome with Wood Handle B Black with wood Handle Heavy Duty Brackets Capitol Finish Qty / Pkg C1220 Chrome Handle Assembly Black Die-Cast Traco 1-1/2" 1" 1-13/16" 4-15/16" 7-1/4" 4-15/16" 4-15/16" -1/4" 4-15/16" 7-1/4" 11" 3/4" 3/4" 11/16" 2-3/4" 3/4" Finish Qty / Pkg C1249 Aluminum 1 C1250 Black 1 Finish Qty / Pkg C1162 Aluminum 1 C1163 Bronze 1 Finish Qty / Pkg C1060 Aluminum 1 C1061 Black 1 Finish Qty / Pkg C1000 Aluminum 1 C1001 Black 1 C1185 Bronze 1 C1203 White 1 If you do not see the part you need, please send a sample or call our customer service department. Phone: (612) page 51 Fax: (612)

53 PATIO DOOR HANDLES 1" 2-1/8" 4-15/16" 4-15/16" 1/4" -1/4" 31/32" 7/8" Includes Fit-All Keeper Assy., Screws and Black Outside Pull Plastic Outside Pull Better Bilt Keyed Finish C1002 No Aluminum C1003 No Black C1094 Yes Black C1004 C1007 C1191 Finish Aluminum Black White Finish Aluminum B Black Finish Black A Aluminum W White Key Lock with Keeper Finish Aluminum Black Handle Set with Key Lock Finish Aluminum w/brown Handle Handle Set without Key Lock Finish Aluminum w/brown Handle Handle Set with Plate Finish Aluminum w/wood Handle Handle Set without Key Lock Finish X Aluminum w/wood Handle Handle Set with Plate and Key Finish Aluminum w/wood Handle Handle Set without Cylinder Finish Black W White BZ Bronze A Almond Handle Set with Key Cylinder Finish K Black WK White Metal with Wood Handle Sash Controls Finish New Style Aluminum Peachtree Finish Black Peachtree Original Acorn Metal Handle Set Base Plate Only Finish Black Acorn Handle Set without Key Cylinder Finish X Black Handle Set with Key Cylinder Finish KX Black Acorn Replacement Phone: (612) page 52 Fax: (612)

54 PATIO DOOR ROLLERS 1-1/4" Part # Wheel Wheel Type Type Steel Steel 9-258N 9-258N Nylon Nylon Daryl Part Part # # Wheel Wheel Type Type Steel Steel 9-245N 9-245N Nylon Nylon 9-245SS 9-245SS Stainless Steel Steel Crossly Wheel Wheel Type Type Steel Steel SS Stainless Steel Steel Acorn 1-1/8" ROLLERS Max. Max. Dimple Width 23/32" 23/32 Arundel Acorn Wheel Wheel Type Type Steel Steel 9-331SS 9-331SS Stainless Steel Steel Pennco Silverline Ador Ador Hi-Lite 9-209A 9-209A Ador Ador Hi-Lite Part # Wheel Wheel Type Type Steel Steel N Nylon Nylon Look Part # Wheel Wheel Type Type Steel Steel 9-266SS 9-266SS Stainless Steel Peachtree Wheel Type Wheel Type Steel Steel 9-200N Nylon 9-200N Nylon Max. Dimple 9-324Width 3/4" Max. Dimple Width 3/4 If you do not see the part you need, please send a sample or call our service department. Phone: (612) page 53 Fax: (612)

55 PATIO DOOR ROLLERS 1-1/4" 1-1/2" A A Lenahan/Daryl / Part # Wheel Wheel Type Type Steel Steel 9-261SS 9-261SS Stainless Steel Steel Air Air Control/Keller / Jones Wheel Wheel Type Type Steel Steel 9-392SS 9-392SS Stainless Steel Steel Max. Max. Housing Thickness 3/4 3/4" Part # Wheel Wheel Type Type Steel Steel 9-304SS 9-304SS Stainless Steel Steel Part # Wheel Wheel Type Type Steel Steel Maximum Maximum Width Width at at Locking Tangs 7/8 7/8" Crown/Lawson / Part # Wheel Wheel Type Type 9-338N 9-338N Nylon Nylon Steel Steel 9-338SS 9-338SS Stainless Steel Steel Maximum Width at at Locking Tangs 7/8 7/8" Harcar Part # Wheel Wheel Type Type Steel Steel 9-366SS 9-366SS Stainless Steel Steel Max. Max. Dimple Width 29/32 29/32" Max. Max. Width at at Locking Tangs 1 1" Binnings/Pan / Am Am Keller Keller Harcar Harcar Part # Wheel Wheel Type Type Nylon Nylon 9-255M 9-255M Steel Steel Lumidor Part # Wheel Wheel Type Type Steel Steel 9-233N 9-233N Nylon Nylon Stanley Part # Wheel Wheel Type Type Nylon Nylon Steel Steel Part # Wheel Wheel Type Type Steel Steel If you do not see the part you need, please send a sample or call our service department. Phone: (612) page 54 Fax: (612)

56 PATIO DOOR ROLLERS 1-11/16" 7/8" 1-1/4" 9-207N Arcadia Atlas/Portalume / Flat Flat Roller, Die Cast Binnings 1-1/2" Wheel Type Wheel Type Steel Steel 9-248SS 9-248SS Stainless Stainless Steel Steel Die Cast Die Cast Keller/Air / Air Control 1-1/4" Peachtree Wheel Wheel Type Type Steel Steel 9-205P 9-205P Nylon Nylon Peachtree Wheel Wheel Type Type Steel Steel 9-252N 9-252N Nylon Nylon 9-252SS 9-252SS Stainless Steel Steel Miller Wheel Wheel Type Type Steel Steel 9-247N 9-247N Nylon Nylon 9-247SS 9-247SS Stainless Steel Steel Yale 1-5/16" 1-1/2" DOR1000 Crossly Wheel Wheel Type Type Nylon Nylon 9-237S 9-237S Steel Steel 9-237SS 9-237SS Stainless Steel Steel Wallace Wheel Wheel Type Type Steel Steel 9-257N 9-257N Nylon Nylon Pan Am Wheel Wheel Type Type Steel Steel 9-249SS 9-249SS Stainless Steel Steel Lawson If you do not see the part you need, please send a sample or call our service department. Phone: (612) page 55 Fax: (612)

57 PATIO DOOR ROLLERS 1-1/2" 1-21/32" Wheel Wheel Type Type Nylon Nylon 9-364S 9-364S Steel Steel Max. Width at at Locking Tangs 31/32 31/32" 1-11/16" Plametron 1-1/8" 1" Wallace/Lawson / Alcan/Noradex / Tandem Rollers In Order by Wheel Diameter 1-1/8" 1-1/4" 1-1/4" 3-1/8" 1-1/16" 1-1/4" O.D. (5/16" Wide) Slot Width: 11/16" QTY/PKG 13/16" 9-254SS 9-254SS Daryl/Plaza / Wheel Type A Nylon 9-267S Acorn Steel 9-405A D1917 Acorn Wheel Wheel Type Type Steel Steel N Nylon Nylon SS Stainless Stainless Steel Steel Wheel Wheel Type Type 9-368SS 9-368SS Stainless Steel Max. Max. Housing Housing Width Width at at Locking Tangs = 7/8 7/8" Inner Inner Housing Housing Stainless Stainless Steel Steel Thermalume Thermalume Wheel Type Wheel Type Steel Steel Stainless Stainless Steel Steel (Housing (Housing and and Wheels) Wheels) Wheel Type Wheel Type 9-239T Steel 9-239T Steel 9-310T Nylon 9-310T Nylon 9-312T 9-312T Stainless Stainless Steel Steel /2" Part # Wheel Wheel Type Type 9-313T 9-313T Steel Steel 9-316T 9-316T Stainless Steel 9-346T 9-346T Nylon Nylon Wheel Wheel Type Type Steel Steel Fleetwood Fleetwood Part # Wheel Wheel Type Type Steel Steel 9-280SS 9-280SS Stainless Steel If you do not see the part you need, please send a sample or call our service department. Phone: (612) page 56 Fax: (612)

58 PATIO DOOR ROLLERS Capitol Sugarcreek Capitol SWS Ind Capitol / Remington Max. Dimple Width 3/ Remington Max. Dimple Width 19/16 Metal Industries /Capitol Nu-Air Max. Dimple Width 13/16 Betterbilt If you do not see the part you need, please send a sample or call our service department. Phone: (612) page 57 Fax: (612)

59 PATIO DOOR HARDWARE AA B C D " 1/4" 1/4 3/8" 3/8 5/16" 5/16 Steel Steel with with Steel Steel Ball Ball Bearing Bearing Hub, Hub, Nut & Bolt Nut Bolt A A B B C C D D X X 1-1/4 1-1/4" 1/4 1/4" 25/64 25/64" 5/16 5/16" Steel Steel with with Steel Steel Ball Ball Bearing Hub Hub A A BB C C DD /4" 1-1/4 1/4 1/4" 11/32 11/32" 5/16" 5/16 Steel Steel with with Steel Steel Ball Ball Bearing Bearing Hub Hub & Axle Hub Axle A A BB C C DD /4" 1-1/4 1/4 1/4" 51/64 51/64" 5/16" 5/16 Steel Steel with with Steel Steel Ball Ball Bearing Bearing Hub Hub Acorn Acorn # A A BB C C D /32" 1-15/32 1/4 1/4" 11/32" 11/32 5/16" 5/16 Steel Steel with with Steel Ball Bearing Hub Part # A A B B C C D SS 1-15/ /32" 1/4 1/4" 11/32 11/32" 5/16" 5/16 All All Stainless Steel Available in 38 & 50 lengths Peachtree Peachtree Charley-BAR Safety Lock STOP BURGLARS Makes Sliding Glass Doors Jimmy-Proof! NEW STEEL SAFETY KEY LOCK Key hangs neatly out of your way when not in use Comes with all necessary hardware and instructions Available in three lengths, three finishes and three packages Anodized Aluminum con struc tion allows it to be cut to fit any size door New security feature: Improved black plastic saddle now takes a key so that the bar cannot be raised from the outside by wires or other devices New saddle keeps small chil dren from opening the door from the inside Patio Door Bumper.035 Gauge Stainless Steel Mailing TUBE - 50 per carton sold in carton qty only Carded - 10 per carton sold in carton qty only Repair Tracks BULK - 25 per carton Part # Length Size Finish Finish " Mill Mill B B 48 48" Bronze W 48 48" White White " Mill Mill Part # Finish Finish B Black Black W White White Replacement Track Cover. 8' Lengths. Sold in multiples of 5 only. Heavy duty. Recommended for tracks that are too corroded to use Repairman's "first choice" in door replacement track. Part Part # # Length Length Finish Finish ft. 6ft. Anodized ft. 8ft. Anodized Glass Door Track Extrusions Glass Door Track Extrusions 1/16 Thick x 15/16 Wide 1/16" Thick 15/16" Wide Part Part # # Length Length Finish Finish ft. 6ft. Anodized ft. 8ft. Anodized Screen Door Track Extrusions Screen Door Track Extrusions 1/16 Thick x 15/16 Wide 1/16" Thick x 15/16" Wide. If you do not see the part you need, please send a sample or call our service department. Phone: (612) page 58 Fax: (612)

60 2903 Series - Stanley HOLLOW CLOSET CORE DOOR HARDWARE Bi-Fold Door Hardware Track Only Track - White Only (AW) - WHITE or brown (A) Hardware Package Only #BFT20A 2-0 Track (for 2 leafs) #BFH2A 2-leaf hardware package #BFT26A 2-6 Track (for 2 leafs) #BFT30A 3-0 Track (for 2 leafs) #BFT40A 4-0 Track (for 4 leafs) #BFT50A 5-0 Track (for 4 leafs) #BFT60A 6-0 Track (for 4 leafs) 1825 Series - Johnson Hardware Complete Sets - includes track and hardware package Track Only - BROWN #BFS Set #BFT Track (for 2 leafs) #BFS Set #BFT Track (for 2 leafs) #BFS Set #BFT Track (for 2 leafs) #BFS Set #BFT Track (for 4 leafs) #BFS Set #BFT Track (for 4 leafs) #BFS Set #BFT Track (for 4 leafs) Hardware Package Only #BFH2 #BFH4 2-leaf hardware package 4-leaf hardware package #1801 Top Pivot Guide #1807 Bottom Pivot #36 wood knob #1811 Jamb Bracket #1808 Aligner ByPass Door Hardware 3800 Series - Sterling Hardware For 1-3/8" doors up to 50 lbs. per door Complete Sets - includes track and 2-door hardware package Track Only- ZINC #BPS Set #BPT door track #BPS Set #BPT door track #BPS Set #BPT door track #BPS Set #BPT door track #BPH2 #BPG 3800 Series hardware bag Bypass Door Guide (specify 1-3/8" or 1-3/4") If you do not see the part you need, please send a sample or call our service department. Phone: (612) page 59 Fax: (612)

61 HOLLOW CORE CLOSET DOOR HARDWARE Brass Back Plate Finish Brass 8-300C Chrome Die Cast Plastic, Brown Plastic, Brown Wood, Unfinished Wood, Unfinished Finish Brass 8-301C Chrome Die Cast Nylon, Tan Flush Finish Brass 8-202AB Antique Brass 8-202C Chrome Die Cast E-Z Roll Metal, Bright Brass Finish Flush Metal, Mount Bright Brass Edge Fisnish Pull Flush Mount Edge Pull Metal, Aluminum Finish Metal, Aluminum Finish /4 Offset E-Z Roll /8 Offset S for Hanger w/ Screws /4 Offset S for Hanger w/ Screws /8 Offset S for Hanger w/ Screws /4 Offset Acme /2 Offset Acme Metal with Nylon Posts. Adjustable for 3/4, 1, 1-1/8 and 1-3/8 By-passing Doors 4 per pack with Screws Adjustable For 1-3/8 By-passing Doors 2 pieces E-Z Roll Metal with Nylon Posts Adjusts for Doors 3/4-1-3/ Metal w/nylon Post. Wood Tone, Adjusts for Doors 3/4-1-3/ Adjusts for Doors 3/4-1-3/4 Nylon, Tan If you do not see the part you need, please send a sample or call our service department. Phone: (612) page 60 Fax: (612)

62 CLOSET DOOR HARDWARE Bypass Panel Doors Bypass Mirrored Doors Top Roller Bottom Guide Bottom Roller Ball Bearing Wheel Top Guide Bottom Track 2 1/ Top Track Fascia J Track Available in / Hardware Packs Low Profile Bifold Track 4411 High Profile Bifold Track 4412 Available bifold in Stock Frame Colors Bright Gold Satin Gold Bright White All bypass & bifold tracks available in 3 stock colors. Phone: (612) page 61 Fax: (612)

63 CLOSET DOOR HARDWARE A A 3-116A 3-118A 3-158A Wardrobe Door Wardrobe Door 1-1/2" 1" 1-1/2" 1" Top Guide Top Guide Nylon Top Guide; stamped steel snap-in housing for steel framed doors. 3-7/16" Nylon Top Guide; stamped steel snap-in housing for steel framed doors. CRL Wardrobe Wardrobe Door Door Top Guide Steel snap-in design housing with plastic guide head; used on Acme doors. 1-7/16" 15/16" CAT. NO. GUIDE QTY/PKG Guide Qty/Pkg N6791 Nylon 2 Minimum N6791order: 1 pack. Nylon 2 2-1/4" CAT. NO. GUIDE QTY/PKG Guide Qty/Pkg N6821 Nylon 2 N6821 Minimum order: 1 pack. Nylon 2 2-1/4" 3-7/16" new Part CAT. NO. # Guide GUIDE Qty/Pkg QTY/PKG N6890 Plastic 2 N6890 Minimum order: 1 pack. Plastic 2 2-1/4" 2-13/16" CRL Wardrobe Wardrobe Door Door Roller Roller Assembly Assembly CRL Wardrobe Wardrobe Door Door CRL Wardrobe Wardrobe Door Door Roller Assembly Top Guide Flat edge nylon non-ball bearing roller; adjustable steel housing; snap-in bracket for steel framed doors. Roller Qty/Pkg CAT. NO. ROLLER QTY/PKG N6790 Nylon Nylon 1 Minimum order: 1 pack. 1 1/4" 1-7/16" O.D. 3-1/16" 3-3/8" Flat edge nylon roller. Adjustable steel housing. Roller Qty/Pkg CAT. NO. ROLLER QTY/PKG N6963 N693 Nylon 1 1 Minimum order: 1 pack. 1-3/4" 2-1/2" 7/16" 1-1/2" O.D. Twin rubber guide rollers; mounted horizontially on a stamped steel snap-in housing for steel framed doors. new CAT. NO. ROLLERS QTY/PKG Roller Qty/Pkg N6945 Rubber 2 Minimum N6945order: 1 pack. Rubber 2 7/8" O.D. 2-1/16" 2-1/8" 1-5/8" 1-3/4" 2-92 Pivot Pivot Guide Stanley If you do not see the part you need, please send a sample or call our service department Phone: (612) page 62 Fax: (612)

64 3/4 BIFOLD CLOSET DOOR HARDWARE Phone: (612) page 63 Fax: (612)

65 WEATHERSTRIPPING Self Adhesive Weatherstripping 1/2 3/8 Polyprene 1/4 de Silicone 3/16 de 797B Black Polyprene Self Adhesive Weatherstrip Length: 19 feet Finish 797B-19 Smoke Seal 638CH Charcoal Silicone Self Adhesive Weatherstrip Length: 19 feet Finish 638CH-19FT Smoke Seal V-Seal CRL Weatherstrip Tape Self-Adhesive Tape Seals Gaps Up to 3/8" (9.5 mm) Jamb p 7/16" (11.1 mm) 7/16" (11.1 mm) Reduces Air Infiltration Adhesive Backed for Super Fast Installation Works With Wood and Metal Door Frames 7/16" (11.1 mm) 7/16" (11.1 mm) Latch Side Black White V-Seal Door Jamb Finish Roll Length P39C180 Clear 180 (54.9 m) Jamb Door Door PF114BL PF114W Finish Black White Door Jamb Dust Pads 3/8" (9.5 mm) 2" (50.8 mm) 1-1/16" (26.9 mm) Head and Hinge Side Adhesive Backing Allows Press-On Installation Seals Door Corners These Door Jamb Dust Pads are made of woven pile on a polypropylene fin with a pressure-sensitive adhesive backing. The Pad is applied to the door jamb above the rubber threshold, which helps seal the door corners against dirt and dust. POP1W POP1BL Finish White Black Q-Lon Seal made of open-cell urethane foam core for strike jamb hinge sill corners. Part# PAD Finish Bronze 1-1/2 Lengths 1-1/2 Phone: (612) page 64 Fax: (612)

66 WEATHERSTRIPPING REPLACEMENT WEATHERSTRIPPING.187 Backing Width Pile Height 100 Ft. 500 Ft Ft..170 (11/64) (13/64) (15/64) (17/64) (19/64) (21/64) (23/64) Backing Width Pile Height 100 Ft. 500 Ft Ft..170 (11/64) (13/64) (15/64) (17/64) (19/64) (21/64) (23/64) Additional Backing Sizes Available:.360,.430,.500 WEATHERSTRIPPING ADHESIVE BACKED WITH WEATHERSTRIP ADHESIVE BACKING 63-49TP 100' Roll 63-51TP 1,000' Roll.270 Backing Width.220 Pile Height ENTRASEAL ASTRAGAL DOOR WEATHERSTRIP ASTRAGAL SEALS 63-55TP 100' Roll 63-57TP 1,000' Roll.270 Backing Width.250 Pile Height Other Sizes Available Upon Request With Minimum Orders For commercial/entrance entrance doors, including wood wood doors. doors. Designed with Unique Features not not Available in in other other Astragals. Fin is in the center of the pile for added support and also is in both pile rows for greater energy efficiency. Standard pile height - 1/4 83 1/4 long Profile for Kawneer Door Shown CRL Finned Finned Weatherstrip Weatherstrip Unique Center Fin Stops Air, Water, and Dust From Infiltrating Joints Around Windows and Doors Made to Replace Most Existing Pile Weatherstrips Resists Mold, Mildew, and Corrosion W H Solid Barrier Fin Pile Height (H) Back Width (W) Roll Length FS7716C.160 (4 mm).187 (4.7 mm) 100 (30.5 m) FS77163M.160 (4 mm).187 (4.7 mm) 3000 (914.4 m) Phone: (612) page 65 Fax: (612)

PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20

PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20 Exit Devices Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy

More information

Standard-Duty Key-In-Lever Locksets. CL3900 Series

Standard-Duty Key-In-Lever Locksets. CL3900 Series 45037 CR CL3900 8/23/01 4:16 PM Page 1 Standard-Duty Key-In-Lever Locksets CL3900 Series Applications Applications An economical, Grade 2 standard duty lever lockset which provides an outstanding combination

More information

T H E F A L C O N D I F F E R E N C E

T H E F A L C O N D I F F E R E N C E T H E F A L C O N D I F F E R E N C E S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you spec not only has to meet local building codes, but also your

More information

Optional Latchbolts /8" (60 mm) Square or Round Corner, Dead Latch /4" (70 mm) Square or Round Corner, Dead Latch - Standard

Optional Latchbolts /8 (60 mm) Square or Round Corner, Dead Latch /4 (70 mm) Square or Round Corner, Dead Latch - Standard Cylindrical Grade 1 Extra Heavy Duty Commercial, Industrial, Institutional 3400 Series Lifetime warranty No exposed mounting screws Non-handed Standard and interchangeable cores available Optional Latchbolts

More information

K Series. Grade 1 cylindrical lever locks

K Series. Grade 1 cylindrical lever locks K Series Grade 1 cylindrical lever locks Falcon K Series 4 Overview 5 Features and specifications 6 Designs and finishes 7 Functions 8 Cylinders 9 Competitive keyways 10 Options and accessories 11 Competitive

More information

6200 Series. Strikes for mortise or cylindrical devices. Features and benefits. Overview

6200 Series. Strikes for mortise or cylindrical devices. Features and benefits. Overview 6200 Series Strikes for mortise or cylindrical devices Overview Features and benefits Von Duprin electric strikes are known for their reliability, durability and security. The 6200 Series strikes are designed

More information

X Series. Features. comparison chart. Lock type. Glossary and finish chart. MA Series. RU Series

X Series. Features. comparison chart. Lock type. Glossary and finish chart. MA Series. RU Series Lock type finish chart MA X Grade 1, heavy-duty cylindrical knob locks RU T When you need a tough, reliable lock that can also withstand the corrosive conditions of a marine environment you need a Falcon

More information

Heavy-Duty Cylindrical Knob Locksets. CK4200 Series

Heavy-Duty Cylindrical Knob Locksets. CK4200 Series Heavy-Duty Cylindrical Knob Locksets CK4200 Series Introduction Applications The highest quality materials and precision manufacturing ensure strength, durability and quiet operation. Ideal for demanding,

More information

CL3100 Series. Lever Lockset Parts Manual

CL3100 Series. Lever Lockset Parts Manual CL00 Series Lever Lockset Parts Manual Table of Contents Outside Inside Series/ Function Type ANSI No. Function Description Page Number CL0 Passage or Closet F7 Latchbolt by lever either side. Both levers

More information

MB1 Series ANSI Grade 1 Extra Heavy Duty Lever Locks

MB1 Series ANSI Grade 1 Extra Heavy Duty Lever Locks MB1 Series ANSI Grade 1 Extra Heavy Duty Lever Locks FEATURES: Heavy duty chassis with various lever styles available. Strong cast and machined stainless steel hubs, mounted with heavy duty return springs.

More information

3800 Series

3800 Series 3800 Series Hager 3800 Series mortise lock provides maximum security and durability for the harshest environments. With field reversible handing, ease of installation, and both escutcheon and sectional

More information

Table of Contents Auxiliary Locks

Table of Contents Auxiliary Locks Copyright 2003, 2004, 2007-2017, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents SSL1 Spring Latch For Security SideLight Applications...1 8200 Series

More information

Door Hardware, Access Control Devices, Electric Strikes and Exit Devices. Product Directory

Door Hardware, Access Control Devices, Electric Strikes and Exit Devices. Product Directory Door Hardware, Access Control Devices, Electric Strikes and s Product Directory Imagine The RITE Door Imagine an integrated commercial door system that meets all fire and safety regulations, is easy to

More information

An ASSA ABLOY Group brand Series. Flatbar Exit Devices

An ASSA ABLOY Group brand Series. Flatbar Exit Devices An ASSA ABLOY Group brand 1800 Series Flatbar Exit Devices introduction Yale 1800 series exit devices are the ideal choice for economy commercial applications where consistent quality, ease of use and

More information

Interconnected Locksets. ANSI/BHMA Grade 2 Certified Mechanical Electronic. An ASSA ABLOY Group brand

Interconnected Locksets. ANSI/BHMA Grade 2 Certified Mechanical Electronic. An ASSA ABLOY Group brand Interconnected Locksets ANSI/BHMA Grade 2 Certified Mechanical Electronic An ASSA ABLOY Group brand Introduction table of contents YH Collection Mechanical Interconnected Locksets Infographic...3 Specifications...4

More information

Adams Rite. Product Directory. adamsrite.com

Adams Rite. Product Directory. adamsrite.com Adams Rite Product Directory adamsrite.com Adams Rite has been manufacturing high quality locks for nearly 100 years. Our deadlocks, deadlatches and related hardware provide reliable security solutions

More information

CAL-ROYAL & F2200 Rim Type Panic And Fire Exit Devices 2260 & F2260 Vertical Rod Panic And Fire Exit Devices ANSI A156.

CAL-ROYAL & F2200 Rim Type Panic And Fire Exit Devices 2260 & F2260 Vertical Rod Panic And Fire Exit Devices ANSI A156. CAL-ROYAL P R O D U C T S, I N C. 3 HOUR FIRE RATED 2200 & F2200 Rim Type Panic And Fire Exit Devices 2260 & F2260 Vertical Rod Panic And Fire Exit Devices ANSI A156.3, Grade 1 Lifetime Warranty BHMA CERTIFIED

More information

ARCHITECTURAL DOOR HARDWARE EXIT DEVICE CATALOG

ARCHITECTURAL DOOR HARDWARE EXIT DEVICE CATALOG ARCHITECTURAL DOOR HARDWARE EXIT DEVICE CATALOG January 1, 2017 v3 West Coast Office (800) 544-4422 East Coast Office (800) 225-6737 intldoorclosers.com Index EXIT DEVICES 5000 Series (Grade 2)...1-10

More information

A Series. Cylindrical locks

A Series. Cylindrical locks A Series Cylindrical locks Contents 4 A Series introduction and performance features 5 Exploded view 6 Knob and lever designs 7 Knob designs and finishes 7 Door handing 8-9 Lock functions 10 Cylinder types

More information

SCHLAGE KEY BLANKS. Plain Both Sides Back of All Section Key C000. New key system begin here and expand to the right.

SCHLAGE KEY BLANKS. Plain Both Sides Back of All Section Key C000. New key system begin here and expand to the right. 13 16" SCHLAGE KEY BLANKS CONVENTIONAL SCHLAGE KEY BLANKS All Primus blanks require proper authorization. 6-Pin Control Standard Front For C Family 35-009 Back of All Except 35-015 Standard For All Control

More information

Series SS19 Institutional Life Safety Mortise Locksets - Levers

Series SS19 Institutional Life Safety Mortise Locksets - Levers Series SS19 Institutional Life Safety Mortise Locksets - Levers Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications

More information

Series 5SS19 Institutional Life Safety Mortise Locksets - Levers

Series 5SS19 Institutional Life Safety Mortise Locksets - Levers Series 5SS19 Institutional Life Safety Mortise Locksets - Levers Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI

More information

Falcon Monarch Dor-O-Matic. RU/RW Series. Extra Heavy Duty, Pre-assembled Unit Locks and Retrofit ADA Mortise Trim

Falcon Monarch Dor-O-Matic. RU/RW Series. Extra Heavy Duty, Pre-assembled Unit Locks and Retrofit ADA Mortise Trim Falcon Monarch Dor-O-Matic RU/RW Series Extra Heavy Duty, Pre-assembled Unit Locks and Retrofit ADA Mortise Trim T H E F A L C O N D I F F E R E N C E S A F E T Y, S E C U R I T Y A N D U N C O M P R O

More information

GRADE 1 LEVER CYLINDRICAL LOCKSETS 5400LN SERIES CATALOG LOCK CYLINDRICAL 5400LN

GRADE 1 LEVER CYLINDRICAL LOCKSETS 5400LN SERIES CATALOG LOCK CYLINDRICAL 5400LN GRADE 1 LEVER CYLINDRICAL LOCKSETS 5400LN SERIES CYLINDRICAL LOCK 5400LN CATALOG RUGGED YET REFINED Designed for industrial, commercial and institutional use, Yale s 5400LN Series heavy-duty cylindrical

More information

Grade 2 Cylindrical Locksets DORMA C500

Grade 2 Cylindrical Locksets DORMA C500 Grade 2 Cylindrical Locksets DORMA C500 Table of Contents Features DORMA s C500 Series Grade 2 cylindrical locksets provide security, aesthetics, and dependability at an affordable price. These key-in-lever

More information

Overview ML2000. Table of Contents

Overview ML2000. Table of Contents Overview Table of Contents Overview...2 Features...3-4 Functions...5-9 ML20900 ECL Applications...10 ML20900 ECL Features...12 ML20900 ECL Functions...13 ML20600 NAC Series Electrified Mortise Lock with

More information

Design Guidelines and Standards Manual University of Cincinnati

Design Guidelines and Standards Manual University of Cincinnati SECTION 08710D - A. SPECIFICATIONS FORMAT 1. It is preferred that this section include all items of door hardware. Window hardware and operators should be specified in the window section. This approach

More information

A Series. Cylindrical locks

A Series. Cylindrical locks A Series Cylindrical locks Contents 45 Mechanical lock guide 6 A Series introduction and performance features 7 Exploded view 8 Knob and lever designs 9 Knob designs and finishes 9 Door handing 1011 Lock

More information

Simplex 1000 Series. Key Override Models: Key Override Models:

Simplex 1000 Series. Key Override Models: Key Override Models: Simplex 1000 Series 39 12 1 73 23 24 20 26 21 40 2 44 25 45 3 73 6 79 40 22 16 46 9 11 19 8 7 72 37 74 13 38 86 35 77 55 53 29 47 49 27 31 48 61 34 52 54 50 30 62 34 32 38 51 51 38 Notes: Older model locks

More information

Retrofit Locks and Trim. Product Catalog

Retrofit Locks and Trim. Product Catalog Retrofit Locks and Trim Product Catalog Index General Information Falcon Lock Philosophy Quality locksets delivered on time is the Falcon Lock creed. Whether you re ordering Falcon Locks for a retrofit

More information

SERIES 700 TECHNICAL DETAILS MONDAY, JANUARY 21, 2008

SERIES 700 TECHNICAL DETAILS MONDAY, JANUARY 21, 2008 SERIES 700 TECHNICAL DETAILS 1. Table of Contents 2. Overall Specifications 3. Overall Preassembled Door Dimensions 4. Door Leaf Dimensions 5. Door Leaf Construction 6. Cylindrical Lock Preparation 7.

More information

Cylinders and Keys Cylindrical Locks Mortise Locks Exit Devices Door Closers

Cylinders and Keys Cylindrical Locks Mortise Locks Exit Devices Door Closers Architectural Hardware Product Guide Condensed Catalog Cylinders and Keys Cylinders and Keys Cylindrical Locks Cylindrical Locks Mortise Locks Mortise Locks Exit Devices Exit Devices Door Closers Door

More information

Key in Lever and Key in Knob Locksets

Key in Lever and Key in Knob Locksets Key in Lever and Key in Knob Locksets Locksets Key in Knob and Key in Lever Key in Knob and Key in Lever Locksets Overview Lockwood offers a range of Key in Knob and Key in Lever locksets for all architectural,

More information

7KC SERIES: MEDIUM DUTY CYLINDRICAL LOCKS LEVERS. 7KC Series. Medium Duty Cylindrical Locks Levers. BEST: Setting the Standard for Security

7KC SERIES: MEDIUM DUTY CYLINDRICAL LOCKS LEVERS. 7KC Series. Medium Duty Cylindrical Locks Levers. BEST: Setting the Standard for Security 7KC SERIES: MEDIUM DUTY CYLINDRICAL LOCKS LEVERS 7KC Series Medium Duty Cylindrical Locks Levers BEST: Setting the Standard for Security TABLE OF CONTENTS Features...2 Specifications...2 How To Order...3

More information

Spectra Class. N6000 Series Exit Devices SECURITY DOOR CONTROLS. N6100 Rim Mount Exit Device. N6200 Surface Vertical Rod Exit Device.

Spectra Class. N6000 Series Exit Devices SECURITY DOOR CONTROLS. N6100 Rim Mount Exit Device. N6200 Surface Vertical Rod Exit Device. N6000 Series Exit Devices Spectra Class Rim Mount Surface Vertical Rod N6100 Rim Mount Exit Device For use on single doors or pair of doors with mullion 1-3/4"(44 mm) door thickness standard. Specify thickness

More information

ITALIA SERIES. ANSI STANDARD A156.2, GRADE 3 (Optional Grade 2) LEVERS / KNOBS COMPATIBLE WITH NM SERIES GRADE 1 MORTISE LOCKS ESCUTCHEON MORTISE LOCK

ITALIA SERIES. ANSI STANDARD A156.2, GRADE 3 (Optional Grade 2) LEVERS / KNOBS COMPATIBLE WITH NM SERIES GRADE 1 MORTISE LOCKS ESCUTCHEON MORTISE LOCK ITALIA SERIES RESIDENTIAL / COMMERCIAL STAINLESS STEEL LEVERSETS, KNOBSETS, ESCUTCHEON, DEADBOLTS ITALIA SERIES STAINLESS STEEL LEVERSETS, KNOBSETS, ESCUTCHEON, DEADBOLTS ANSI STANDARD A56.2, GRADE (Optional

More information

8800 Rim Exit Device 80 Series

8800 Rim Exit Device 80 Series 8800 Rim Exit Device 8800 Series Rim Exit Device 8800 Features Designed for standard width stile applications on wood and metal doors Also available as an HC8800 or WS8800 for hurricane-resistant applications,

More information

Exit Devices Rainer Security Products Ltd

Exit Devices Rainer Security Products Ltd Exit Devices Rainer Security Products Ltd Unit B6, Rudford Industrial Estate, Ford, Arundel, West Sussex BN18 0BF +44 (0) 190 72211 rainersecurity.co.uk sales@rainersecurity.co.uk 2 S1150 & S1250 Series

More information

TL3700 Series. Tubular Lock

TL3700 Series. Tubular Lock Series Tubular Lock Introduction Table of Contents Introduction... 2 Functions... 3 Muséo Trim Designs... 4 Roses... 8 Finishes... 9 How to Order/Quick Codes... 9 Architectural Specifications... 11 Series

More information

DOOR TECHNOLOGY ORDER CATALOG SECTION GU-SECURY Automatic Door Lock & Lever Handle

DOOR TECHNOLOGY ORDER CATALOG SECTION GU-SECURY Automatic Door Lock & Lever Handle DOOR TECHNOLOGY ORDER CATALOG SECTION 03.2 GU-SECURY Automatic Door Lock & Lever Handle Table of Contents 03.2 GU-SECURY Automatic Door Lock & Lever Handle GU-SECURY Automatic Automatic Door Lock...03.2.5

More information

DIAMOND DOOR PRODUCTS TECHNICAL DETAILS MARCH 2010

DIAMOND DOOR PRODUCTS TECHNICAL DETAILS MARCH 2010 DIAMOND DOOR PRODUCTS TECHNICAL DETAILS 1. Table of Contents 2. Overall Specifications 3. Warranty 4. Door Overall Dimensions Standard locations 5. Door Construction 6. Total Preassembled Dimensions 7.

More information

A-Series Service Manual

A-Series Service Manual Table of Contents Introduction... 1 Standard Features*... 1 Lock Assembly Drawing Index... A10S... 4 A5D... 5 A30D... 6 A40S... 7 A43D... 8 A53PD... 9 A70PD... 10 A79PD... 11 A80PD... 1 A85PD... 13 A170...

More information

View Point Terrace Apartments SECTION DOOR HARDWARE PART 1 - GENERAL 1.1 SUMMARY

View Point Terrace Apartments SECTION DOOR HARDWARE PART 1 - GENERAL 1.1 SUMMARY SECTION 087100 DOOR HARDWARE PART 1 - GENERAL 1.1 SUMMARY A. Work under this section includes the complete finish hardware requirements for the project. Quantities listed are for the contractor s convenience

More information

Door control and security hardware

Door control and security hardware Door control and security hardware Introduction Since pioneering the first exit device in 908, Von Duprin life safety products have provided unparalleled quality, performance and flexibility for schools,

More information

APEX 2000 SERIES: TOUCHBAR EXIT DEVICES. Apex 2000 Series. Touchbar Exit Devices. Strength by design. Simply PRECISION

APEX 2000 SERIES: TOUCHBAR EXIT DEVICES. Apex 2000 Series. Touchbar Exit Devices. Strength by design. Simply PRECISION APEX 2000 SERIES: TOUCHBAR EXIT DEVICES Apex 2000 Series Touchbar Exit Devices Strength by design. Simply PRECISION TABLE OF CONTENTS Wide Stile Exit Devices & Trims Rim Devices...4, 5 Surface Vertical

More information

Cylindrical Lever Locks

Cylindrical Lever Locks 7 Line Cylindrical Lever Locks Copyright 2007-2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Specifications Table of Contents Windstorm Certifications... 3 Features,

More information

EXIT DEVICES Apex 2000 Series

EXIT DEVICES Apex 2000 Series PRECISION HARDWARE EXIT DEVICES Apex 2000 Series GENERAL INFORMATION TABLE OF CONTENTS WIDE STILE EXIT DEVICES & TRIMS Page Rim Devices...4, 5 Surface Vertical Rod Devices...6, 7 Mortise Devices...8, 9

More information

BULLDOG. Commercial Hardware

BULLDOG. Commercial Hardware BULLDOG Commercial Hardware Pricing & Specification Guide March 1, 2015 1. Table of Contents Bulldog Commercial Locksets Series 6900 Grade-2 Interconnect... Series 7200 Grade-1 Levers... Series 6200 Grade

More information

International Hardwarecorp.

International Hardwarecorp. Volume 15 HARDWARE SECURITY STOREFRONT GATES International Hardwarecorp. Since 1968 ACCESS CONTROL PARKING OVERHEAD CONCEALED CLOSERS 200 & 200-SA Series 5 YEAR WARRANTY Underwriters Laboratories Inc.

More information

CYLINDRICAL ADAPTATION LOCKS. Cylindrical Adaptations. Cylindrical Adaptation Locks. BEST: Setting the Standard for Security

CYLINDRICAL ADAPTATION LOCKS. Cylindrical Adaptations. Cylindrical Adaptation Locks. BEST: Setting the Standard for Security CYLINDRICAL ADAPTATION LOCKS Cylindrical Adaptations Cylindrical Adaptation Locks BEST: Setting the Standard for Security TABLE OF CONTENTS Introduction...2 9K/7KC Features...2 9K/7KC Specifications...3

More information

L-Series Commercial Locks

L-Series Commercial Locks L-Series Commercial Locks Contents 4 L-Series Commercial Locks 6 Schlage L9000 Series 7 Schlage L400 Series 8 M Collection Decorative Lever Designs and Finishes 10 Standard Lever Designs and Finishes 12

More information

Concealed Vertical Rod Features

Concealed Vertical Rod Features Concealed Vertical Rod Features ED5800 Panic-Listed Concealed Vertical Rod Exit Device ED5800A 3-Hour Fire-Listed Concealed Vertical Rod Exit Device FOR USE WiTH METAL DOORS OnLy Features Handing Device

More information

Operation. Smooth. ML2000 Series Mortise Lock

Operation. Smooth. ML2000 Series Mortise Lock Smooth Operation ML2000 Series Mortise Lock The ML2000 Series is an ANSI/BHMA Grade 1 mortise lock designed to withstand the most abusive environments. Constructed of heavy-gauge steel with unique, patented

More information

Schlage Architectural Guide

Schlage Architectural Guide Schlage Architectural Guide Product warranties commercial applications Limited Warranty Schlage Lock Company (the Company ) warrants to the original purchaser the products manufactured by it (the Product

More information

Deadbolt by key outside. Thumbturn lever inside retracts deadbolt only; will not project deadbolt.

Deadbolt by key outside. Thumbturn lever inside retracts deadbolt only; will not project deadbolt. ML2000 Series Mortise Lockset Functions Function Type ANSI Description ML2011 Deadlock F18 Deadbolt by key outside. No inside operation. ML2012 Deadlock F16 Deadbolt by key either side. ML2013 Classroom

More information

WRAP-AROUND PLATES ARCHITECTURAL HARDWARE & ACCESSORIES. WEB: Section F, Version 1

WRAP-AROUND PLATES ARCHITECTURAL HARDWARE & ACCESSORIES. WEB:    Section F, Version 1 ARCHITECTURAL HARDWARE & ACCESSORIES San Francisco, California WRAP-AROUND PLATES September 2015 DON-JO MFG., INC. P.O. Box 929 Sterling, MA 01564 PHONE: 978.422.3377 FAX: 978.422.3467 WATS: 800.628.8389

More information

Headline. Overhead Door Holders/Stops

Headline. Overhead Door Holders/Stops Headline Overhead Door Holders/Stops Quality hardware for superior door control 2 Glynn-Johnson has been providing the highest quality door control hardware for 75 years. Known in the industry as the overhead

More information

8800 Rim Exit Device 80 Series

8800 Rim Exit Device 80 Series 8800 Rim Exit Device 8800 Series Rim Exit Device 8800 Features Designed for standard width stile applications on wood and metal doors Also available as an HC8800 or WS8800 for hurricane-resistant applications,

More information

L Series. Commercial mortise locks

L Series. Commercial mortise locks L Series Commercial mortise locks Contents 45 Mechanical lock guide 7 L Series introduction and performance features 89 Schlage L9000 and L400 Series 10 M Collection levers 12 Standard Collection levers

More information

Push Plates. Visit midwestwholesale.com for published list prices or contact a sales representative for your pricing.

Push Plates. Visit midwestwholesale.com for published list prices or contact a sales representative for your pricing. 1001 Push Plates 605 613 628 630 1001-1 Push Plate 3 12 4 1001-11 Push Plate 8 16 4 4 4 1001-2 Push Plate 3½ 15 4 4 4 1001-3 Push Plate 4 16 4 4 4 4 1001-9 Push Plate 6 16 4 4 1807-4 Push Plate 4 16 Beveled

More information

7380F Series Multi-point Locking System. An ASSA ABLOY Group brand

7380F Series Multi-point Locking System. An ASSA ABLOY Group brand 780F Series Multi-point Locking System An ASSA ABLOY Group brand a windstorm solution engineered to save lives Yale 780F Series is a multi-point auto deadlocking system developed to help protect lives

More information

The Leading Source For Quality Products And Excellent Service!

The Leading Source For Quality Products And Excellent Service! Volume 10 Proud of our Past Focused on the Future OHC Closers Surface Closers Gate Closer Door Hardware Miscellaneous Hardware Strikes Door Holders, Stops & Flush Bolts Thresholds Door Sweeps Aluminum

More information

33A/35A Series. Exit devices

33A/35A Series. Exit devices 33A/35A Series Exit devices Introduction Invest in longevity Von Duprin devices are engineered to add value over time. The robust materials and unique engineering add to the longevity, while the flexible

More information

FOLGER ADAM PRICE LIST

FOLGER ADAM PRICE LIST FOLGER ADAM PRICE LIST Effective 02/15/2013 INDEX Handing of Locks and Mounting... 2-5 Key Identification Charts... 6-7 Keys, Cylinders and Accessories... 8-9 10 Series and Accessories (Mechanical)...

More information

2013 CERTIFIED PRODUCTS DIRECTORY

2013 CERTIFIED PRODUCTS DIRECTORY 2013 CERTIFIED PRODUCTS DIRECTORY Effective 2013 BUILDERS HARDWARE MANUFACTURERS ASSOCIATION 355 Lexington Avenue, 15th Floor, New York, NY 10017-6603 Tel: 212-297-2122 Fax: 212-370-9047 www.buildershardware.com

More information

33A/35A Series Exit Devices

33A/35A Series Exit Devices 33A/35A Series Exit Devices Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part

More information

CONTENTS GETTING STARTED 1 1 FUNCTIONS AND PARTS LISTS K Series Service Manual

CONTENTS GETTING STARTED 1 1 FUNCTIONS AND PARTS LISTS K Series Service Manual CREDITS/COPYRIGHT 000-00 Best Lock Corporation dba Best Access Systems. All rights reserved. Printed in the United States of America. Information in this document is subject to change without notice and

More information

8800 Rim Exit Device 80 Series

8800 Rim Exit Device 80 Series 8800 Rim Exit Device 8800 Series Rim Exit Device 8800 Features Designed for standard width stile applications on wood and metal doors Also available as an HC8800 or WS8800 for hurricane-resistant applications,

More information

TRADITIONAL DOOR LOCK

TRADITIONAL DOOR LOCK TRADITIONAL DOOR LOCK The ERA Traditional Door Lock has been designed to replace most existing front door locks, providing added security to new exterior and interior doors. The lock is suitable for left

More information

Table of Contents :C 06/15/11 Copyright 2010, 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.

Table of Contents :C 06/15/11 Copyright 2010, 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Specialty Hardware Copyright 2010, 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent

More information

CAL-ROYAL & F9800 Rim Type Panic And Fire Exit Devices 9860 & F9860 Vertical Rod Panic And Fire Exit Devices ANSI A156.

CAL-ROYAL & F9800 Rim Type Panic And Fire Exit Devices 9860 & F9860 Vertical Rod Panic And Fire Exit Devices ANSI A156. Cal-Royal(3/08)new_9800 4/16/2008 11:57 AM Page 1 CAL-ROYAL P R O D U C T S, I N C. 3 HOUR FIRE RATED 9800 & F9800 Rim Type Panic And Fire Exit Devices 9860 & F9860 Vertical Rod Panic And Fire Exit Devices

More information

Overhead door holders/ stops

Overhead door holders/ stops Overhead door holders/ stops Quality hardware for superior door control Known throughout the industry as the overhead door holder specialist, Glynn-Johnson has made its name with state-of-the-art manufacturing

More information

CYLINDRICAL ADAPTATION LOCKS CYLINDRICAL ADAPTATION LOCKS

CYLINDRICAL ADAPTATION LOCKS CYLINDRICAL ADAPTATION LOCKS CYLINDRICAL ADAPTATION LOCKS CYLINDRICAL ADAPTATION LOCKS TABLE OF CONTENTS TABLE OF CONTENTS Page Introduction...2 9K/7KC Features...2 9K/7KC Specifications...3 9K/7KC Functions...4 9K/7KC Lever & Trims...5

More information

PRICE LIST June 1, 2012

PRICE LIST June 1, 2012 June 1, 2012 TABLE OF CONTENTS Overhead Concealed Closers 4-6 Mechanical Exit Devices 45-47, 52-54 Surface Mount Closers 6-14 Electrified Exit Devices 48-51 Pedestrian Gate Closers 14 Mechanical Cylindrical

More information

Grade 1 Heavy-Duty Mortise Locksets DORMA ML9000 MK9000

Grade 1 Heavy-Duty Mortise Locksets DORMA ML9000 MK9000 Grade 1 Heavy-Duty Mortise Locksets DORMA ML9000 MK9000 ML9000/MK9000 Series Table of Contents ML9000/MK9000 Grade 1 Mortise Locksets Features...................................... 3 Technical Details

More information

Light Commercial Electric Strikes. Light Duty 00 Series - 001, 002, 003, , HD005, S005, 006, 007. The ANSI 01 Series - 012, S012, - 014, 014W

Light Commercial Electric Strikes. Light Duty 00 Series - 001, 002, 003, , HD005, S005, 006, 007. The ANSI 01 Series - 012, S012, - 014, 014W Table of Contents 4000 Series - 4100 4-7 - 4100 Series Accessories 7-4200 *new* 8-11 4800 Series - Universal 4850-4850ITL *new* - Low Current Draw 4850-PoE & 4850-LCD - 4800-3/4 AC & DC - 4801 - Bolt strike

More information

PRICE LIST. Table of Contents

PRICE LIST. Table of Contents PRICE LIST Table of Contents 3600 Concealed Vertical Rod... 2-3 3700 Rim Latching... 3-4 Electrical Latching Kits... 4 Power Supplies... 4 Power Transfers... 4 Exit Device Accessories... 5 Inactive Devices...

More information

Behavioral Healthcare Solutions

Behavioral Healthcare Solutions BEHAVIORAL HEALTHCARE SOLUTIONS Behavioral Healthcare Solutions Secure Patient Safety Lever (SPSL) Secure Seclusion Room Lock (SSRL) Secure Emergency Door Alarm () Secure Patient Safety Electrified (SPSE)

More information

22 Series. Exit device

22 Series. Exit device 22 Series Exit device Introduction Built to protect Von Duprin products symbolize a commitment to safety and security. It s evident in the meticulous engineering behind every exit device. After all, keeping

More information

Auxiliary hardware & general information. Exit devices

Auxiliary hardware & general information. Exit devices Auxiliary hardware & general information Exit devices Introduction Since pioneering the first exit device in 1908, Von Duprin life safety products have provided unparalleled quality, performance and flexibility

More information

22 Series Exit Devices

22 Series Exit Devices 22 Series Exit Devices 22 Exit Device Finishes Color US Number BHMA Number Sprayed Aluminum SP28 689 Sprayed Dark Bronze SP313 695 2005 Ingersoll-Rand Co. May be copied for use with specification submittal.

More information

An ASSA ABLOY Group brand Series. Multi-point Locking System

An ASSA ABLOY Group brand Series. Multi-point Locking System An ASSA ABLOY Group brand 770 Series Multi-point Locking System Page Revised Electronically 9/1 770 series multi-point locking system a windstorm solution engineered to save lives Yale 770 series is a

More information

EXIT DEVICES Reliant 5000 Series

EXIT DEVICES Reliant 5000 Series PRECISION HARDWARE EXIT DEVICES Reliant 5000 Series GENERAL INFORMATION TABLE OF CONTENTS EXIT DEVICES & TRIMS Page Rim Devices...4, 5 Surface Vertical Rod Devices...6, 7 MULLIONS Fire Labeled Removable

More information

L-Series Commercial Locks

L-Series Commercial Locks L-Series Commercial Locks Contents 5 L-Series Commercial Locks 7 Schlage L9000 Series 7 Schlage L400 Series 8 Danmark Levers 12 Lever Designs and Finishes 18 Escutcheons and Roses 19 Thumbturns 20 Lock

More information

ARCHITECTURAL DOOR HARDWARE DOOR STOPS & HOLDERS THRESHOLDS & GASKETING CATALOG

ARCHITECTURAL DOOR HARDWARE DOOR STOPS & HOLDERS THRESHOLDS & GASKETING CATALOG ARCHITECTURAL DOOR HARDWARE DOOR STOPS & HOLDERS THRESHOLDS & GASKETING CATALOG January 1, 2017 v3 West Coast Office (800) 544-4422 East Coast Office (800) 225-6737 intldoorclosers.com Index DOOR STOPS

More information

FINISH HARDWARE

FINISH HARDWARE 1.01 DESCRIPTION OF WORK PART 1 GENERAL FINISH HARDWARE 08710-1 A. Work under this section comprises of furnishing and installing the hardware specified herein and noted on the drawings for a complete

More information

98/99 Series Rim Exit Devices

98/99 Series Rim Exit Devices 98/99 Series Rim Exit Devices Service manual 99 RIM 98 RIM INDEX 98/99 Rim Devices Basic Panic Device... Basic Fire Device... Baseplate Assemblies... Center Case Assembly... Variations of the Basic Device

More information

EXIT DEVICES. philihardware.com

EXIT DEVICES. philihardware.com EXIT DEVICES philihardware.com UL Introduction GENEAL INFOMATION ADVANTAGE exit devices are designed and manufactured in accordance to ISO9001 QMS and certified by BHMA. All ADVANTAGE exit devices are

More information

DOOR CONTROL AND SECURITY HARDWARE

DOOR CONTROL AND SECURITY HARDWARE DOOR CONTROL AND SECURITY HARDWARE Table of Contents StrikeForce Electric Strikes.......................................................................... 4-4 Series 6000 Electric Strikes......................................................................

More information

190/350/500 STANDARD ENTRANCES

190/350/500 STANDARD ENTRANCES APRIL, 2012 190/350/500 STANDARD ENTRANCES FEATURES 1 Features 190 narrow stile has 2-1/8" vertical stile, 2-1/4" top and 3-7/8" bottom rail 350 medium stile has 3-1/2" vertical stile, 3-1/2" top and 6-1/2"

More information

99 Series Exit devices

99 Series Exit devices 99 Series Exit devices Fire Rated: Tested on fire door assemblies in accordance with Australian Standards, refer fire door manufacturer for specific approval details The Von Duprin 99 Series is a contemporary

More information

9700/F9700 SERIES RIM EXIT DEVICE

9700/F9700 SERIES RIM EXIT DEVICE INSTALLATION INSTRUCTIONS 9700/F9700 SERIES RIM EXIT DEVICE Index: Screw chart Tools required Outside trim options "03" Additional door prep Device installation Options available 5300 retro-fit preparation

More information

DC5000 Series. Cam Action Door Closer

DC5000 Series. Cam Action Door Closer Series Cam Action Door Closer Introduction Table of Contents Introduction...2 Features... 3 Mountings... 4 Accessories... 5 How to Order... 6 Quick Codes... 6 Helpful Terms... 7 Specifications... 8 Applications

More information

ND-Series. Cylindrical Locks

ND-Series. Cylindrical Locks ND-Series Cylindrical Locks Contents 4-5 Mechanical Lock Guide 6-7 ND-Series Introduction 8 Performance Features 9 Exploded View 10 Lever Designs 11 Lever Finishes 11 Door Handing 12-15 Lock Functions

More information

Underwriters Laboratories : 9K series Listed by Underwriters Laboratories for use on 3 Hr, A label for single or double swinging doors.

Underwriters Laboratories : 9K series Listed by Underwriters Laboratories for use on 3 Hr, A label for single or double swinging doors. 9K Series Locks ADA Americans With Disabilities Act: 9K series The design and operation of the BEST cylindrical lock meets the intent of the standard for ANSI A117.1 section 404.2.6 Builders Hardware Manufacturers

More information

RIVETT ARCHITECTURAL HARDWARE LTD.

RIVETT ARCHITECTURAL HARDWARE LTD. CONSULTANT : JOHN TAMBLYN A.H.C. DATE : JUNE,18,2014 JIM FLEMING REV.#1: JUNE,25,2014 CONTRACT #: RIVETT ARCHITECTURAL HARDWARE LTD. FINISHING HARDWARE SCHEDULE FOR TRANSIT TERMINAL REVISIONS 190 SIMCOE

More information

Please send a sample for accurate identification. Ador-Hilite 5 6-5/8 6-5/8" H-55. Order H /16. Outside. Only. Inside No Longer Available.

Please send a sample for accurate identification. Ador-Hilite 5 6-5/8 6-5/8 H-55. Order H /16. Outside. Only. Inside No Longer Available. H-1 Fullview H-5 H-6 Daryl H-9 Chrome with wood Acorn Dornwal 3 2-1/8 Daryl Patio Rama 300 Ador-Hilite Order H-101-A H-16 H-25 H-26 Solid Chrome Most popular set used by most patio door manufacturers.

More information

FSB North America Price Book

FSB North America Price Book FSB North America Price Book Effective May 1, 2017 (Rev. 2) www.fsbna.com FSB North America Price Book 2017 Effective May 1, 2017 www.fsbna.com Table of Contents Terms and Conditions 4 Product Warranties

More information

98/99TM. Series. Exit Devices

98/99TM. Series. Exit Devices 98/99TM Series Exit Devices Introduction Exit devices are a critical part of the Fire and Life Safety egress system and will provide safe and reliable service when properly applied and maintained. Von

More information

Multi-Family Price Book 73. Effective March 1, 2013

Multi-Family Price Book 73. Effective March 1, 2013 Multi-Family Price Book 73 Effective March 1, 2013 Table of Contents Product Warranties iii-iv BE Series Deadbolts 1 Programmable Locking System 2 Programmable Electronic Deadbolt Parts 3 ibutton Credentials

More information