:: Additional Your new RC12R6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions):

Size: px
Start display at page:

Download ":: Additional Your new RC12R6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions):"

Transcription

1

2 :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RCR6 Kit. Please take a moment to read through this manual to help familiarize yourself with these steps. We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags. Check each bag for these sheets before you start to build. :: KIT Features.0mm 7075-T6 hard anodized aluminum chassis & lower pod plate Narrow profile for extra ground clearance in chassis roll Center Fox shock with genuine Kashima Coating Battery stop allows 3 different transverse battery positions to fine tune mass balance Raised front bumper plate allows extra ground clearance on front of chassis New center pivot design for optimized rear pod assembly Ultra-low center of gravity Graphite front control arms Geometry based from IFMAR World Championship winning R5 dynamic strut assembly Updated rear axle and differential assembly Floating servo mounts to chassis in symmetric positions to maintain equal flex of chassis Hard coated, polished, front king pin style suspension for smooth operation :: Additional Your new RCR6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions): : scale electric motor Electronic speed control 3.7V-7.4V LiPo, or 6.0V LiFe with shorty battery dimensions -channel surface transmitter : scale wheels / tires Battery charger -channel receiver Steering servo Polycarbonate specific spray paint for body : scale polycarbonate body :: Other Helpful Items Silicone Shock Fluid (Refer to catalog for complete listings) Body scissors (AE Part #737) Silicone Diff Fluid (Refer to catalog for complete listings) Reamer/Hole Punch FT Hex Wrenches / Nut Drivers (AE Part #505, 58, 59) FT TC Ride Height Gauge (AE Part #45) FT Turnbuckle Wrench (AE Part #4) Needle nose pliers Soldering iron Hobby knife Wire cutters Calipers or a precision ruler Associated Electrics, Inc. 60 Commercentre Dr. Lake Forest, CA 9630 Customer Service Tel: Fax:

3 3 :: Hardware - : Scale View Button Head (bhcs) Ballstuds x4mm (350) FT x4mm Aluminum (8545).5x6mm (350) (353) FT Aluminum (8550) FT Titanium (9580) 3x8mm (353) FT 3x8mm Aluminum (855) FT 3x8mm Titanium (958) 3x0mm (5) FT 3x0mm Aluminum (8554) FT 3x0mm Titanium (958) Black 3.5mm Short (3390) FT TiN 3.5mm Short (3374) Silver 3.5mm Long (339) FT TiN 3.5mm Long (3375) Black 5mm Short (380) FT TiN 5mm Short (388) Silver 5mm Long (383) FT TiN 5mm Long (39) Flat Head (fhcs) Ball Bearings x6mm (4674) FT x6mm Aluminum (8547).5x6mm (4675) FT.5x6mm Aluminum (8549) 3x5mm (3540) (354) FT Aluminum (855) 3x8mm (50) FT 3x8mm Aluminum (8553) FT 3x8mm Titanium (959) 3x0mm (50) FT 3x0mm Aluminum (8555) FT 3x0mm Titanium (9593) 4x4mm (897) FT 4x4mm Aluminum (857) FT Bearing (8680) 5 x 8 x.5mm Bearing (9560) 5 x 0 x 4mm Socket Head (shcs) Setscrew Shims and Washers x6mm (786).5x8mm (89).5xmm (869) 3x3mm (55) 3x8mm (4670) 3x0mm (467).030 Washer (9630) Kingpin Shim (845) Blue Aluminum Ballstud Washer 5.5x0.5mm (338) Blue Aluminum Ballstud Washer 5.5xmm (338) Blue Aluminum Ballstud Washer 5.5xmm (3383) Nuts (lock/plain) Black 8mm Short (38) FT TiN 8mm Short (389) Silver 8mm Long (384) FT TiN 8mm Long (39) Black 0mm Short (38) FT TiN 0mm Short (390) Silver 0mm Long (385) FT TiN 0mm Long (393) Pivot Balls FT Bearing, Flanged (868).50 x.375 x.5 FT Bearing (868).50x.375x.5 FT Bearing (8685).5 x.33 x.4.6x6mm Washer (39) Aluminum Bulkhead Washer 7.8x0.5mm (3384) Aluminum Bulkhead Washer 7.8xmm (3385) Aluminum Bulkhead Washer 7.8xmm (3386) Rear Axle Shim.005 (4554) M3 Nut, Black (9477) M3 Locknut, Blue (3550) M3 Locknut, Black (55) M3 Locknut w/flange, Black (56) 3mm Flanged Locknut, Blue Alum.(539) FT Pivot Ball () Suspension Arm Pivot Ball Upper (4755) Suspension Arm Pivot Ball Lower (4755) In Out Bellville Washer (4737) FT Thrust Bearing (8683) 4.5x0mm & 4x9.85mm M4 Locknut, Black (896) M4 Flanged Locknut, Knurled, Black (948) M4 Flanged Locknut, Blue Alum. (355) M4 Flanged Nut, Knurled, Black (9738)

4 4 :: Table of Contents... Cover... Introduction 3... : Hardware Fold Out 4... Table of Contents Shock, Damper Tubes & Turnbuckles Build (Bag.,.) Rear Axle Build (Bag 4., 4.) Chassis & Electronics Build (Bag 5., 5.) Catalog 0...Kit Setup Sheet...Blank Setup Sheet Rear Pod Build (Bag.,.)... Back Cover Front Suspension Build (Bag 3.) :: Notes This symbol indicates a special note or instruction in the manual. This symbol indicates a Racers Tip. Scanning this QR code will take you to Team Associated s R6 web page. Here you can find information that will help you with your build and setup There is a : hardware foldout page in the front of the manual. To check the size of a part, line up your hardare with the correct drawing until you find the exact size. Each part in the foldout has a number assigned to it for ordering replacement parts. Associated Electrics, Inc. 60 Commercentre Dr. Lake Forest, CA 9630 Customer Service Tel: Fax:

5 4/7 :: Shock, Damper Tubes, & Turnbuckles Build - Bag.,. - Step 4768 R6 Piston, hole 4767 R6 Shock Body (Fox Kashima Coat) FT Pivot Ball R6 Shock Cap Retainer 4774 R6 Shock Cap, Top 4768 E-Clip x 4768 R6 Shock Shaft 33 O-Ring 4773 Shock Shaft Bushing 4774 R6 Shock Cap, Bottom Shock fluid #54 (30wt) 4767 Shock Collar O-Ring 4773 Shock Bladder 4767 R6 Shock Collar :: Shock, Damper Tubes, & Turnbuckles Build - Bag.,. - Step Bladder Installation With the shaft extended 5%, place bladder on the top of the shock body, displacing the extra oil. While maintaining pressure on the bladder against the shock body, carefully lift one side of the bladder to allow any extra oil to escape. Place shock cap on top of bladder, and secure it by threading the aluminum cap retainer onto the shock body R6 Shock Rod End 4779 R6 Shock Shaft Extension FT Pivot Ball 4783 R6 Shock Spring, Gray (.8lb) 55 M3x3mm Set Screw 4774 R6 Shock Eyelet 80.0mm See page for shock length build options :: Shock, Damper Tubes, & Turnbuckles Build - Bag.,. - Step 3 Build x 4786 Damper Tube 4787 Damper Tube Shaft x8mm Set Screw Build two dampers 888 x Anti Roll Bar Cup Shock fluid #5447 (5k cst)

6 6 :: Shock, Damper Tubes, & Turnbuckles Build - Bag.,. - Step 4 Steering Turnbuckle 3305 x Turnbuckle Eyelet 4404 Turnbuckle 3x45mm Racers Tip: Use black grease (#6588) on the threads of the turnbuckles for easier ball cup installation 30.0mm Orient the line to the left throughout the car. It indicates which end has the left hand threads Build x (right and left side) :: Rear Pod Build - Bag.,. - Step 4730 R6 LR Bulkhead 479 R6 Motor Mount 47 R6 Motor Mount Brace 478 Pivot Brace Slider FT Pivot Ball 354 x4 FHCS 477 R6 Lower Pod Plate, Aluminum 353 x 354 FHCS # - Install Pivot ball to rear pod. # - Snap pivot brace Slider onto Pivot Ball. :: Rear Pod Build - Bag.,. - Step # - Install Pivot brace to chassis. # - Slide rear pod into pivot brace. 476 Pivot Brace 475 R6 Chassis, Aluminum 354 FHCS x

7 7 :: Rear Pod Build - Bag.,. - Step 3 Use #786 SHCS to adjust for free ball movement. 786 x x6mm SHCS 478 Rear Pod Link Build x x FT Pivot Ball 354 x FHCS Build right and left sides :: Rear Pod Build - Bag.,. - Step Aluminum Ballstud Washer, 5.5xmm 384 Ballstud Long, 8mm (Silver) x8mm Set Screw 354 FHCS x 47 R6 Chassis Brace, Right Side Build right and left sides 3550 FT Aluminum M3 Locknut, Blue 4707 Side Spring Retainer 479 Side Spring, 4.7lb/in - White :: Rear Pod Build - Bag.,. - Step M3 Nut, Black 3550 x FT Aluminum M3 Locknut, Blue 478 R6 Upper Pod Plate 353 x 353 3x8mm 383 x Ballstud Long, 5mm (Silver)

8 8 :: Front Suspension Build - Bag 3. - Step 4749 RCR6 Upper Arm Mount Dynamic Strut: RCR6 Front Bulkhead 4749 RCR6 Upper Arm Mount Inserts (3 Dot) 5 x 3x0mm Build right and left sides (KIT) :: Front Suspension Build - Bag 3. - Step 4760 RCR6 Front Axle 4759 RCR6 Steering Blocks 383 Ballstud 5mm, Long 3550 FT Aluminum M3 Locknut, Blue 4755 Suspension Arm Pivot Ball, Upper 4753 R6 Arm Eyelet 88 Turnbuckle 4750 RCR6 Suspension Arm, Upper 3.50mm Build right and left sides :: Front Suspension Build - Bag 3. - Step Suspension Arm Pivot Ball Bushing O-Ring 353 x 4758 RCR6 3x7.5mm Kingpin 4755 Suspension Arm Pivot Ball, Lower Racer s Tip: Use CA Glue for permanent mounting 4754 Suspension Arm Pivot Ball Bushing 473 RCR6 Suspension Arm Diff Fluid #5447 5k 43 Springs,.00, Short 699 E-Clip Build right and left sides

9 :: Front Suspension Build - Bag 3. - Step E-Clip R6 Hinge Pin 845 x Kingpin Shims Build right and left sides Use #4753 Caster Shims to fine tune caster by Increments 4753 Caster Shim x 4753 Caster Clips ( & 4 ) 55 x 3x3mm Set Screw Caster Adjustment: 9 - (0.55mm) - 4 (.0mm) (KIT) :: Front Suspension Build - Bag 3. - Step x 4745 x R6 Track Width Bushing 4740 x R6 Suspension Arm Standoff 3384 x Aluminum Bulkhead Washer 0.5mm :: Rear Axle Build - Bag 4., 4. - Step Kit Setup: x5mm FHCS x Track Width Bushings: LEFT RIGHT -0mm (KIT) +0.5mm +mm +.5mm +mm Left Side 0 Note the rear axle height adjusters orientation Right Side 473 x Rear Axle Height Adjuster (0) 868 x Flanged Bearing,.50x.375x.5

10 0 :: Rear Axle Build - Bag 4., 4. - Step 4735 Rear Axle 868 x3 FT Bearing.50x.375x Spur Gear, 96T, 64P 89.5x8mm SHCS 4739 R6 Rear Hub, Left 8504 D-Drive Rings x 669 x FT Carbide Diff Balls, /8 #6636 Silicone grease 4738 R6 Wheel Hub, Right Do Not over tighten #89 SHCS :: Rear Axle Build - Bag 4., 4. - Step 3 Tighten #896 M4 Locknut so the spur gear just slips at start. Thrust Bearing Setup: Note orientation Inside Outside Washer Washer Diff Thrust Cone 8683 FT Thrust Bearing (4x0mm) #6588 black grease 4737 x Bellville Washer 896 M4 LockNut Black 0.00 Note orientation Curves facing outward 9.85 Bellville Washer Setup: :: Chassis & Electronics Build - Bag 5., 5. - Step 8608 Battery Retainer x 476 R6 Servo Mount Standoff Servo not included 476 x R6 Servo Mount Standoff 354 FHCS x 4675 x.5x6mm FHCS 353 x4

11 :: Chassis & Electronics Build - Bag 5., 5. - Step 3550 x FT Aluminum M3 Locknut, Blue 383 x Ballstud Long, 5mm (Silver) 3760 Servo Saver, Airtronics Servo screw not included KO, Jr, Sanwa, Airtronics : 3T #3760 Hi Tec: 4T Reedy, XP, Futaba: 5T #376 :: Chassis & Electronics Build - Bag 5., 5. - Step Antenna Rod, Fiberglass, with End Cap 474 R6 Servo Mount Brace 353 x R6 Shock Mount 55 3x3mm Set Screw 353 x :: Chassis & Electronics Build - Bag 5., 5. - Step x Center the servo horn to the chassis.

12 :: Chassis & Electronics Build - Bag 5., 5. - Step 5 Kit Setup: Shock Length Setup: Shock Shaft Extension - Yes /Shock Shaft Spacer - No Shock Shaft Extension - Yes /Shock Shaft Spacer - Yes Shock Shaft Extension - No /Shock Shaft Spacer - No Shock Shaft Extension - No /Shock Shaft Spacer - Yes :: Chassis & Electronics Build - Bag 5., 5. - Step x3 FT Aluminum M3 Locknut, Blue 475 R6 Bumper Brace 50 x3 3x8mm FHCS :: Chassis & Electronics Build - Bag 5., 5. - Step x 736 x 736 x Body FT Short FT Short 4766 Pivot Body Clips, Body Clips, R6 Blue Blue Bumper 4535 x Body Mounts 4766 x R6 Chassis Cap 50 x 3x8mm FHCS 4535 Body Mounts x 3897 Body Pivot x 353 x 3x8mm

13 3 :: Chassis & Electronics Build - Bag 5., 5. - Step 8 Motor and pinion/ set screw not included Set The Gear Mesh: You should be able to slightly rock the spur gear teeth back and forth, without making the teeth of the pinion move. If the spur gear mesh is tight, then loosen the #5 screws and move the motor away, then try again. A gear mesh that is too tight or too loose will reduce power and damage the gear teeth. 5 x 3x0mm 338 x Aluminum Ballstud Washer, 5.5xmm Gearing will depend on the motor and track size. Motor, pinion gear, and set screw are not included :: Chassis & Electronics Build - Bag 5., 5. - Step 9 Tires/Wheels not included 8685 x FT Flanged Bearing,.5x.33x M3 Locknut, Blue 473 x3 R6 Rear Hub SHCS :: Chassis & Electronics Build - Bag 5., 5. - Step 0 Electronics & battery not included Use strapping tape to secure battery to chassis Not included

14 4 :: Shock :: Damper Tubes FT Pivot Balls RCR6 Shock Body, FT FOX(R) Shock Body w/genuine Kashima Coat RCR6 Shock Shaft Set RCR6 Shock Rebuild Kit RCR6 Shock Cap Set RCR6 Shock Rod End RCR6 Shock Kit FT Shock O-Rings 3x3mm Set Screw 8 ea x8mm Set Screws Damper Tube Damper Tube Shaft Anti-roll Bar Cups :: Springs RCR6 Shock Spring Kit (white, gray, blue, yellow) RCR6 Shock Spring, White (.lb/in) RCR6 Shock Spring, Gray (.8lb/in) - Kit RCR6 Shock Spring, Blue (.4lb/in) RCR6 Shock Spring, Yellow (3.lb/in) :: Turnbuckles x45mm Turnbuckle Turnbuckle Eyelets :: Servo Saver / Mount Servo Saver, Airtronics - KIT Servo Saver, Futaba Antenna Rod, fiberglass, with end cap RCR6 Servo Mount Set RCR6 Shock Mount 3x3 mm, Set Screws Ballstuds, 5mm, Long FHCS FT M3 Locknut (Blue) :: Shock Fluid Weight Silicone Shock Fluid 5 Weight Silicone Shock Fluid 0 Weight Silicone Shock Fluid.5 Weight Silicone Shock Fluid 5 Weight Silicone Shock Fluid 7.5 Weight Silicone Shock Fluid 30 Weight Silicone Shock Fluid 3.5 Weight Silicone Shock Fluid 35 Weight Silicone Shock Fluid 37.5 Weight Silicone Shock Fluid 40 Weight Silicone Shock Fluid 4.5 Weight Silicone Shock Fluid 45 Weight Silicone Shock Fluid 47.5 Weight Silicone Shock Fluid 50 Weight Silicone Shock Fluid 55 Weight Silicone Shock Fluid 60 Weight Silicone Shock Fluid 70 Weight Silicone Shock Fluid 80 Weight Silicone Shock Fluid oz. oz. oz. oz. oz. oz. oz. oz. oz. oz. oz. oz. oz. oz. oz. oz. oz. oz. oz

15 5 :: Chassis FT Body Clips, Metallic Blue, Short Pivoting Body Mounts Front and Rear Body Mounts FT Pivot Balls 3x8mm Set Screws.5x6mm FHCS Side Spring Retainers RCR6 Chassis, Aluminum RCR6 Chassis Brace Set RCR6 Bumper Brace Pivot Brace Rear Pod Link RCR6 Bumper Set x6mm SHCS Battery Retainer 3x8mm FHCS 5mm Ballstuds, Long Aluminum Ballstud Washer, 5.5x0.5mm Aluminum Ballstud Washer, 5.5x.0mm Aluminum Ballstud Washer, 5.5x.0mm Aluminum Bulkhead Shims, 0.5mm Aluminum Bulkhead Shims,.0mm Aluminum Bulkhead Shims,.5mm 3x8mm FHCS FT M3 Locknut, (Blue) :: Side Springs Side Spring, 3.9lb/in - Black Side Spring, 4.lb/in - Green Side Spring, 4.7lb/in - White - Kit Side Spring, 5.lb/in - Gray Side Spring, 5.8lb/in - Blue

16 6 :: Front Suspension RCR6 Lower Suspension Arms RCR6 Suspension Arm Standoff RCR6 Front Bulkhead RCR6 Track Width Bushings RCR6 Upper Arm Mounts & Inserts RCR6 Upper Suspension Arms RCR6 Hinge Pins RCR6 Arm Eyelet and Caster Clips Set Suspension Arm Pivot Ball Bushing Suspension Arm Pivot Ball Set RCR6 Kingpin, 3x7.5mm RCR6 Steering Blocks RCR6 Front Axle E-Clip Kingpin Shims FT Flanged Bearings,.5 x.33 x.4 Turnbuckles, - Steel 3x0mm 3x3mm Set Screw Ballstuds, 5mm, Long Aluminum Bulkhead Shims, 0.5mm Aluminum Bulkhead Shims,.0mm Aluminum Bulkhead Shims,.0mm 3x5mm FHCS FT M3 Locknut, (Blue) :: Kingpin Springs Kingpin Springs (.00) - Kit Kingpin Springs (.08) Kingpin Springs (.04) Kingpin Springs (.0) Kingpin Springs (.04) Kingpin Springs (.06) 4 4 ea. ea. 8 Pr :: Rear Pod FT Pivot Balls RCR6 Lower Pod Plate, Aluminum RCR6 Upper Pod Plate RCR6 Motor Mount Brace Pivot Brace Slider RCR6 Motor Mount RCR6 LR Bulkhead Rear Axle Height Adjusters, Set FT Flanged Bearings.50 x.375 x.5 3x0mm Ballstuds, 5mm, Long Aluminum Ballstud Washer, 5.5x0.5mm Aluminum Ballstud Washer, 5.5x.0mm Aluminum Ballstud Washer, 5.5x.0mm 3x8mm FHCS FT M3 Locknut, (Blue) M3 Nut (Black) 8 ea

17 7 :: Rear Axle Spur Gear 96T, 64P- Kit Spur Gear 88T, 64P Spur Gear 00T, 64P RCR6 Rear Hub Screw Rear Axle Diff Thrust Cone Bellville Washer RCR6 Wheel Hub, Right RCR6 Wheel Hub, Left FT Carbide Diff Balls, /8 in D-Drive Rings, for Axle FT Ball Bearing,.50x.375x.5 in FT Thrust Bearing, 4x0mm M4 Locknut, Black.5x8mm SHCS :: Factory Team and Option Parts :: Lubes & Adhesives / Misc RCR6 Chassis, Graphite RCR6 Lower Pod Plate, Graphite RCR6 Rear Axle Shims (0.5mm,.0mm,.0mm) RCR6 Front Ride Height Shims, Steel RCR6 Front Ride Height Shims, Graphite RCR6 Front Brace Kit RCR6 Track Width Bushings, Aluminum RCR6 Decal Sheet FT Flanged Bearings,.50 x.375 x.5 FT Bearings,.50 x.375 x.5 FT Thrust Bearing, 4x0mm FT Flanged Bearings,.5 x.33 x.4 ea. 4 ea. 4 ea FT Green Slime Shock Lube FT Locking Adhesive FT Tire Adhesive Silicone Diff Fluid,000CST Silicone Diff Fluid,000CST Silicone Diff Fluid 3,000CST Silicone Diff Fluid 4,000CST Silicone Diff Fluid 5,000CST Silicone Diff Fluid 6,000CST Silicone Diff Fluid 5,000CST Silicone Diff Fluid 7,000CST Silicone Diff Fluid 0,000CST Silicone Diff Fluid 0,000CST Silicone Diff Fluid 30,000CST Silicone Diff Fluid 60,000CST Silicone Diff Fluid 80,000CST Silicone Diff Fluid 00,000CST Silicone Diff Fluid 00,000CST Silicone Diff Fluid 500,000CST Silicone Diff Fluid,000,000CST Black Grease - 4cc S.Diff Lube - 4cc Silicone Grease - 4cc Servo Tape 596

18 8 :: Reedy Electronics 5C 53C 54C 55C 56C 58C 59C 60C 6C 6C 69C 70C 84C 85C 87C :: Reedy Motors Blackbox 800Z/540-M3 5.5 Combo Blackbox 800Z/540-M3.5 Combo Blackbox 800Z/540-M3 7.5 Combo Blackbox 800Z/540-M3 5.5 Combo Blackbox 000Z+/540-M3 0.5 Combo Blackbox 000Z+/540-M3 8.5 Combo Blackbox 000Z+/540-M3 8.0 Combo Blackbox 000Z+/540-M3 7.5 Combo Blackbox 000Z+/540-M3 7.0 Combo Blackbox 000Z+/540-M3 6.5 Combo Blackbox 800Z/540-M3 7.5 SS Combo Blackbox 800Z/540-M3 3.5 SS Combo Blackbox 800Z/540-M3.5 SS Combo Blackbox 800Z/540-M3 0.5 SS Combo Blackbox 800Z/540-M3 5.5 ROAR Combo Blackbox 800Z S Zero-Timing Competition ESC Blackbox 000Z+ S Competition ESC Blackbox 50R Competition ESC Blackbox 50R Competition ESC w/programmer Blackbox Pro Capacitor Unit Blackbox 000Z+ Fan w/screws Blackbox PROgrammer Blackbox 30x30x7mm Fan w/screws Blackbox Pro Modified Capacitor Unit Blackbox ESC/Programmer Connection Wire RS0806 Digital HV Hi-Speed LP Competition Servo RT408 Digital HV Hi-Speed LP Competition Servo RS0806 LP Case Set RS0806 LP Gear Set RT408 LP Case Set RT408 LP Gear Set SC550 Brushed ESC SC550 Bridge Plug Sonic 540-M3 5.5 Sonic 540-M3.5 Sonic 540-M3 7.5 Sonic 540-M3 3.5 Sonic 540-M3 0.5 Sonic 540-M3 9.5 Sonic 540-M3 8.5 Sonic 540-M3 8.0 Sonic 540-M3 7.5 Sonic 540-M3 7.0 Sonic 540-M3 6.5 Sonic 540-M3 6.0 Sonic 540-M3 5.5 Sonic 540-M3 5.0 Sonic 540-M3 4.5 Sonic 540-M3 4.0 Sonic 540-M3 3.5 Sonic 540-M3 SS 7.5 S Sonic 540-M3 SS 3.5 S Sonic 540-M3 SS.5 S Sonic 540-M3 SS 0.5 S Sonic 540-M3 Spec Rotor.0 x 7.5 x 5.3 Sonic 540-M3 Spec Rotor. x 7.5 x 5.3 Sonic 540-M3 Spec Rotor.5 x 7.5 x 5.3 Sonic 540-M3 Mod Rotor.3 x 5.0 x 5.3 Sonic 540-M3 Mod Rotor.5 x 5.0 x 5.3 Sonic 540-M3 Mod Rotor 3.0 x 5.0 x 5.3 Sonic 540-M3 Stainless Steel Bearing Set Sonic 540-M3 Sensor Assembly Sonic 540-M3 Rotor Spacer Set Sonic 540-M3 Case Screws w/insulator Sonic 540-M3 Motor Mounting Plate SS Sonic 540-M3 Motor Mounting Plate Sonic 540-M3 Spec Rotor.3 x 7.5 x 5.3 Sonic 540-M3 5.5 ROAR Spec :: Reedy Batteries and Chargers CN 700EU 700UK AA Alkaline.5V (4) LiPo Pro TX/RX Battery 600mAh 7.4V Flat LiFe Pro TX/RX Battery 300mAh 6.6V Flat LiPo Pro TX/RX Battery 00mAh 7.4V Flat LiPo 70C 3900mAh 7.4V LP Shorty LiPo 8000mAh 70C 3.7V Comp. Battery LiPo 50C 3400mAh 7.4V LP Shorty Charge Harness S Standard Pack 4mm Charge Harness S Standard Pack 5mm LiPo TX Battery - MX 500mAh 7.4V Wolfpack LiPo 3800mAh 7.4V 5C Shorty 5.0mm S-S Balance Charge lead w/sp Clip 4.0mm S-S Balance Charge lead w/sp Clip 6-C Dual AC/DC Comp. Battery Charger 6-C Dual AC/DC Comp. Battery Charger - CHN Plug 6-C Dual AC/DC Comp. Battery Charger - EURO Plug 6-C Dual AC/DC Comp. Battery Charger - UK Plug 7-in- Universal Charge Lead (4mm) XH -6S Balance Board (4mm) RX Charger Lead FUT (4mm) US to IEC 30 C5 angle M AC Power Cord US to IEC 30 C5 angle.5m AC Power Cord EU to IEC 30 C5 angle M AC Power Cord UK to IEC 30 C5 angle M AC Power Cord AU to IEC 30 C5 angle M AC Power Cord CN to IEC 30 C5 angle M AC Power Cord Zappers LiPo 00C 4800mAh 7.6V 0g Zappers LiPo 00C 4400mAh 7.4V 0g Zappers LiPo 70C 5800mAh 7.6V 5g Zappers LiPo 70C 5400mAh 7.4V 5g Zappers LiPo 00C 3600mAh 7.6V LP Shorty 50g Zappers LiPo 8000mAh 00C 3.8V :: Reedy Accessories Low Profile Bullet Plug 4mm x 4mm () Low Profile Bullet Plug 4mm x 4mm (0) Low Profile Bullet Plug 5mm x 4mm () Low Profile Bullet Plug 5mm x 4mm (0) Silicone Wire AWG-Black (m) Silicone Wire 4AWG-Black (m) Silicone Wire 6AWG-Black (m) Shrink Tubing - 5pcs 4.5mm x 0mm Silicone Wire AWG-Black (30m) Silicone Wire 4AWG-Black (30m) Silicone Wire 6AWG-Black (30m) Silicone Wire 3AWG-Black (m) Silicone Wire 3AWG-Black (30m) Low Profile Caged Bullet Plug 4mm x 4mm () Low Profile Caged Bullet Plug 4mm x 4mm (0) Low Profile Caged Bullet Plug 5mm x 4mm () Low Profile Caged Bullet Plug 5mm x 4mm (0) Flat Sensor Wire 70mm Flat Sensor Wire 0mm Flat Sensor Wire 50mm Flat Sensor Wire 00mm Flat Sensor Wire 70mm Flat Sensor Wire 5mm Flat Sensor Wire 75mm

19 :: Tools FT Turnbuckle Wrench FT 4mm Turnbuckle Wrench mm Big Bore Shock Tool FT Dual Turnbuckle Wrench On Road Ride Height Gauge FT TC Ride Height Gauge FT Hex Driver Tool Set, 3pc. FT Hex/Nut Driver Tool Set, 5pc. FT Hex Driver Set, (7 pcs) FT 5/64 Blue Hex Driver FT 3/3 Gold Hex Driver FT 5.5mm Short Nut Driver FT 7mm Nut Driver, T-Handle FT 5.5mm Short Nut Driver FT 3/3 Gold Ball Hex Driver FT Ball Hex Driver Set, (3 pcs) FT 8-Piece /4 Hex Drive Set FT /4 Hex Drive Handle, without tips FT /4 Hex Drive.050 Tip FT /4 Hex Drive /6 Tip FT /4 Hex Drive 5/64 -.0mm Tip FT /4 Hex Drive 3/3 Tip FT /4 Hex Drive.5mm Tip FT /4 Hex Drive.5mm Tip FT /4 Hex Drive 3/6 Nut Driver Tip FT /4 Hex Drive /4 Nut Driver Tip FT /4 Hex Drive /3 Nut Driver Tip FT /4 Hex Drive 5.5mm Nut Driver Tip FT /4 Hex Drive 7.0mm Nut Driver Tip FT /4 Hex Drive 8.0mm Nut Driver Tip FT /4 Hex Drive 5/64 -.0mm Ball End Tip FT /4 Hex Drive 3/3 Ball End Tip FT /4 Hex Drive Standard Screwdriver Tip FT /4 Hex Drive Phillips Screwdriver Tip FT /4 Hex Drive.5mm Ball End Tip FT /4 5 Piece Power Tool Tips Set (5/64-.0mm,.5mm,.5mm, 5/64 -.0mm ball,.5mm ball) FT Shock Shaft Pliers FT T-Handle Ratchet Driver FT Camber + Track Width Tool FT Body Scissors Inch Nylon Wire Ties 6 Inch Nylon Wire Ties 8 Inch Nylon Wire Ties FT Droop Gauge Shock Building Tool Molded Tools, Set 4 Inch Nylon Wire Ties :: Apparel / Promotional SP0* SP* SP* SP3** SP4** SP5** SP6* SP7** SP8** SP9** SP0 SP4** SP9 SP30 SP3 SP38 SP7** SP0* SP* SP* SP3* SP4* SP4S SP4L SP4S SP4L SP43S SP43L SP44S SP44L SP SP5 :: Notes 06 Worlds Hoodie, Black (S, M, L, XL-3XL) 06 Worlds T-shirt, blue, (S, M, L, XL-5XL) 06 Worlds T-shirt, black, (S, M, L, XL-5XL) AE Lite Jacket - Black - (S, M, L, XL, XL) AE 05 Worlds T-Shirt - Blue (S, M, L, XL-5XL) AE 05 Worlds T-Shirt - Black (S, M, L, XL-5XL) 05 Worlds Hoodie, Black (S, M, L, XL -5XL) AE INT L T-Shirt - Black (S, M, L, XL-5XL) AE INT L T-Shirt - White (S, M, L, XL-5XL) AE INT L Hoodie - Black (S, M, L, XL-3XL) AE Patch Trucker Hat AE Splash T-shirt - Blue (S, L, XL-5XL) Team Associated Countertop / Setup Mat Team Associated Pit Mat Reedy Countertop / Setup Mat Reedy Trucker Hat AE Winter Jacket - Black (M, XL, XL) Reedy R-Powered T-Shirt - Black (S, M, L, XL-3XL) Reedy W5 Sweatshirt - Black (M, L, XL, 3XL) Reedy Medallion T-Shirt - Black (S, M, L, XL-3XL) AE Worlds Car Retro T-Shirt, (S, M, L, XL-3XL) Circuit T-Shirt - Black (S, M, L, XL-3XL) AE 0 Hat, Black, Flat Bill, S/M AE 0 Hat, Black, Flat Bill, L/XL AE 0 Hat, Black, Curved Bill, S/M AE 0 Hat, Black, Curved Bill, L/XL AE 0 Hat, White, Flat Bill, S/M AE 0 Hat, White, Flat Bill, L/XL AE 0 Hat, White, Curved Bill, S/M AE 0 Hat, White, Curved Bill, L/XL FT Fluid Carrier Reedy 06 Sticker Sheet 06 Team Associated Decal Sheet Team Associated Track Banner (Black) Team Associated Cloth Banner Reedy Circuit Cloth Banner ** Use part number plus the desired size when ordering 9 Associated Electrics, Inc. 60 Commercentre Drive Lake Forest, CA USA call: (949) fax: (949)

20 Track Info: Size: Surface: Traction: Condition: Small Large Carpet Indoor Low High Bumpy Medium X-Large Asphalt Outdoor Medium Wet Smooth Temperature: Ambient Track Vehicle Info: Body: Weight: Notes: Shock: Piston: x.0 Fluid: 30 Wt Spring:.8 lb/in (Gray) Rebound: 0 Pre Load: 3.mm Free Length: 80.mm Notes: Diff Setting: Loose Medium Tight Electronics: Radio: Servo: EPA: Throttle: % Brake: % ESC: ESC Settings: Motor: Timing: Pinion: Spur: Rollout: Battery: Notes: Tires: Front Tires: Front Tire Dia: Rear Tire: Rear Tire Dia: Notes: Front Tire Left Right Additive: Driver: Track: Date: Event: Qualify: TQ: Main: Finish: Best Lap Time: Droop:.0mm Ride Height: 3.5mm Ride Height: 3.5mm Droop:.0mm Ride Height: 3.5mm Caster: 0mm 0.55mm 4.0mm 6.65mm 8 Dynamic Strut: Spring: 0.0 Kingpin Fluid: 5k cst Free Length Pre Load Shock Position: 0 Side Spring: Pre Load: 0.5mm Damper Tube: Fluid: Width: KIT SETUP Caster Shims: (0.55mm) 4 (.0mm) Spring: White 5k cst Axle 0.5mm 0 Track Width Inserts: Composite Aluminum 0mm +0.5mm +mm +.5mm +mm Axle STD+mm Height: Axle Front Wheelbase: Std 0 - Camber: Right: -0.5 deg Left: -0.5 deg +mm Width: 0 Additive Time: Rear Tire Additive: Additive Time: Servo Position: Battery: Toe: +0.5 deg Right: Inline: - Left: Transverse: 0 + Fwd Mid Back :: For more setups, visit RC0.com and click on Setup Sheets

21 Track Info: Size: Surface: Traction: Condition: Small Large Carpet Indoor Low High Bumpy Temperature: Ambient Vehicle Info: Body: Weight: Notes: Shock: Piston: Fluid: Spring: Rebound: Pre Load: Free Length: Notes: Diff Setting: Medium X-Large Asphalt Outdoor Medium Wet Smooth Track Loose Medium Tight Electronics: Radio: Servo: EPA: Throttle: % Brake: % ESC: ESC Settings: Motor: Timing: Pinion: Spur: Rollout: Battery: Notes: Tires: Front Tires: Front Tire Dia: Rear Tire: Rear Tire Dia: Notes: Front Tire Left Right Additive: Driver: Track: Date: Event: Qualify: TQ: Main: Finish: Best Lap Time: Droop: Caster: 0mm 0.55mm 4.0mm 6.65mm 8 Dynamic Strut: Spring: Kingpin Fluid: Free Length Pre Load Shock Position: Ride Height: Ride Height: Droop: Ride Height: Side Spring: Pre Load: Damper Tube: Fluid: Width: Caster Shims: (0.55mm) 4 (.0mm) Spring: Axle Track Width Inserts: Composite Aluminum 0mm +0.5mm +mm +.5mm +mm Axle STD+mm Height: Axle + Front Wheelbase: Std 0 - Camber: Right: Left: +mm Width: Additive Time: Rear Tire Additive: Additive Time: Servo Position: Battery: Toe: Right: Inline: - Left: Transverse: 0 + Fwd Mid Back :: For more setups, visit RC0.com and click on Setup Sheets

22 Associated Electrics, Inc. 60 Commercentre Dr. Lake Forest, CA 9630 USA call: (949) fax: (949) Check out the following web sites for all of our kits, current products, new releases, setup help, tips, and racing info -

Chassis fits R.O.A.R. approved 2S saddle packs and 2S short packs using optional foam insert

Chassis fits R.O.A.R. approved 2S saddle packs and 2S short packs using optional foam insert :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new vehicle. Please take a moment to read through

More information

V2 12mm Big Bore threaded aluminum shocks with 3mm TiN coated shafts and low friction x-rings for improved smoothness

V2 12mm Big Bore threaded aluminum shocks with 3mm TiN coated shafts and low friction x-rings for improved smoothness :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC0 B. Please take a moment to read through

More information

:: Additional Features Your new TC6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions):

:: Additional Features Your new TC6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions): 8/10 2 :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC10TC6. Please take a moment to

More information

:: Other Helpful Items

:: Other Helpful Items :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new vehicle. Please take a moment to read through

More information

Item Number Item Name MSRP MAP

Item Number Item Name MSRP MAP Kits and RTRs 4021 RC12R6-FT KIT $439.99 $285.99 7063 ProSC 4x4 RTR $529.99 $334.99 7063C ProSC 4X4 RTR LiPo Combo $599.99 $379.99 8023 RC10F6 Factory Team Kit $499.99 $339.99 20150 SC28 RTR LUCAS OIL

More information

7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675" pr GT RACING FRONT

7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675 pr GT RACING FRONT RC10GT & RTR GT MC 9 McCOY GLOW PLUG 1 3.9 2661 CLUTCH NUT CLIPS 6.7 3216 WASHER, #4 12 1.00 3719 NYLON WIRE TIES, 6" heavy duty 12 2.00 3720 NYLON TIES, 8", light duty for receiver 12 2.00 3721 SELF-TAPPING

More information

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we should

More information

:: Additional. :: Other Helpful Items. road tracks. differential for increased life and torque capacity

:: Additional. :: Other Helpful Items. road tracks. differential for increased life and torque capacity :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC0T5M Team Kit. Please take a moment to

More information

Factory Team 12mm Big Bore hard anodized, threaded aluminum shocks with TiN Gold 3mm shock shafts

Factory Team 12mm Big Bore hard anodized, threaded aluminum shocks with TiN Gold 3mm shock shafts / :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC0 T.. Please take a moment to read through

More information

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we should

More information

Factory Team 12mm Big Bore hard anodized, threaded aluminum shocks with TiN Gold 3mm shock shafts

Factory Team 12mm Big Bore hard anodized, threaded aluminum shocks with TiN Gold 3mm shock shafts / :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC0 B.. Please take a moment to read through

More information

BEFORE YOU START CUSTOMER SUPPORT

BEFORE YOU START CUSTOMER SUPPORT BEFORE YOU START The X10 is a high-quality, 1/10-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision

More information

BEFORE YOU START. XRAY USA RCAmerica, 167 Turtle Creek Boulevard Suite C Dallas, Texas 75207, USA

BEFORE YOU START. XRAY USA RCAmerica, 167 Turtle Creek Boulevard Suite C Dallas, Texas 75207, USA BEFORE YOU START The X12 is a high-quality, 1/12-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision

More information

BEFORE YOU START. XRAY Europe K Výstavisku 6992, Trenčín Slovakia EUROPE. XRAY USA RC America, 2030 Century Center Blvd #15 Irving, TX USA

BEFORE YOU START. XRAY Europe K Výstavisku 6992, Trenčín Slovakia EUROPE. XRAY USA RC America, 2030 Century Center Blvd #15 Irving, TX USA BEFORE YOU START The X12 is a high-quality, 1/12-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision

More information

Assembly Manual. 1/10th Formula 1 Car

Assembly Manual. 1/10th Formula 1 Car Assembly Manual 1/10th Formula 1 Car Center Pivot Bag 1 3374 - Center Pivot Socket 40194 - Hard Anodized Alum Pivot ball 3254-2-56 *Note - Sometimes it is helpful to slightly over-tighten the top clamp

More information

Assembly Manual. 1/10th World GT car

Assembly Manual. 1/10th World GT car Assembly Manual 1/10th World GT car Center Pivot Bag 1 3374 - Center Pivot Socket 40194 - Hard Anodized Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the

More information

E Thank you for purchasing VBC Racing product. COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT INSTRUCTIONS MANUAL

E Thank you for purchasing VBC Racing product. COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION FORMULA CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we

More information

1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES

1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES 1:8 SCALE CATALOG Stock is extremely limited. Parts listing as of 7/2001. Sale prices apply to orders direct from Associated only. Items available while supplies last. Items marked Not available or are

More information

Bag 1. Bag 1. Center Pivot. Center Pivot

Bag 1. Bag 1. Center Pivot. Center Pivot 8 00734 01901 5 Center Pivot Bag 1 3374 - Center Pivot Socket 4019 - Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the top clamp screws, then work the ball

More information

carbon fiber before assembly. Sand glue to the edges and

carbon fiber before assembly. Sand glue to the edges and chassis and carbon fiber give you a before assembly. Sand glue to the edges and 5 BAG MARKED CA BAG MARKED M3x6 Flathead 4 03 4 05 BAG MARKED 2 10 13 Installing Steering System Shock Assembly M4x28

More information

:: Other Helpful Items

:: Other Helpful Items 9/0 :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC0 B44.. Please take a moment to read

More information

:: Additional Features Your new TC6.1 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions):

:: Additional Features Your new TC6.1 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions): 7/3 :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC0TC.. Please take a moment to read

More information

Narrowed hard anodized aluminum chassis with centralized mass and mid-motor position for improved handling on high grip off road tracks

Narrowed hard anodized aluminum chassis with centralized mass and mid-motor position for improved handling on high grip off road tracks :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC0B5M Team Kit. Please take a moment to

More information

Contents. Symbols Used. Equipment Required L=R. Page. Apply Thread Lock. Apply. Silicone Oil. 30mm Fan

Contents. Symbols Used. Equipment Required L=R. Page. Apply Thread Lock. Apply. Silicone Oil. 30mm Fan Contents Content Page Content Page Content Page 0. Tool and Accessories 1.Filing the Edges of the Chassis 2.Bulkhead Installation 3.Spur Gear Assembly 4.Front Spool Assembly 5.Gear Differential Assembly

More information

along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet.

along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet. Use this XT2 Dirt Conversion Supplementary Sheet along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet. Parts included in Bag 8: 303141 SHIM 3x5x1.0MM (10) 322111 XT2 COMPOSITE

More information

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG mm. When track High Traction or want to reduce steering

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG mm. When track High Traction or want to reduce steering NOTE : =Apply Thread lock adhesive R80059 One Way Cup () R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 CA GE =Apply CA Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic

More information

for the B3 Sport kit #9013

for the B3 Sport kit #9013 All kit versions include: 2.40:1 transmission for effortless power handling. Molded composite chassis for better rigidity and Lexan B3 racing body. Quadra-symmetric suspension for greater stability and

More information

ABC HOBBY ORIGINAL RADIO CONTROL CAR

ABC HOBBY ORIGINAL RADIO CONTROL CAR ABC HOBBY ORIGINAL RADIO CONTROL CAR Instruction Manual Study the instructions thoroughly before assembly. FRONT WHEEL DRIVE NEW STYLE STRUT SUSPENSION BATHTUB CHASSIS 4 BEVEL GEAR DIFFERENTIAL FULL ADJUSTABLE

More information

New Generation Rear Wheel Drive

New Generation Rear Wheel Drive New Generation Rear Wheel Drive ABC HOBBY ORIGINAL RADIO CONTROL CAR Instruction Manual Study the instructions thoroughly before assembly. REAR 2 WHEEL DRIVE REAR MOUNTED MOTOR BELT DRIVE DOUBLE DECK CHASSIS

More information

DIFFERENTIAL STEERING RACK

DIFFERENTIAL STEERING RACK BAG-A DIFFERENTIAL (2 Sets) +Driver Cap Screw Diff Ball Nylon Nut Thrust Washer Thrust Ball Diff Joint Cup A Allen Wrench 850 Bearing Diff Ring Diff Spring Nylon Nut 850 Bearing Diff Ring Diff Ball Ball

More information

Bigfoot (Model ) Parts List

Bigfoot (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Bigfoot (Model 36084-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

Bag 1. Bag 1. Center Pivot. 3 Center Pivot Cap. Center Pivot

Bag 1. Bag 1. Center Pivot. 3 Center Pivot Cap. Center Pivot Battle Axe 2.0 1:10th Oval Weapon from Team CRC Assembly Manual 0 2. e Ax s tle Win s! t rd Ba s + bi C. ow CR T.Q Sn 0 20 servo and saver not included Part # 100 Calandra Racing Concepts 6785 Martin Street

More information

Stampede (Model ) Parts List

Stampede (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Stampede (Model 36054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

Rustler 4X4 (Model ) Parts List

Rustler 4X4 (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler 4X4 (Model 67064-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

Stampede (Model ) Parts List

Stampede (Model ) Parts List Stampede (Model 36054-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

KSKT RACING PRODUCTS

KSKT RACING PRODUCTS KSKT RACING PRODUCTS ''KSK-B'' SPEC RACING CHASSIS ASSEMBLY INSTRUCTIONS 'The Leader in SK Racing' 1 CHASSIS KIT FEATURES Black Carbon Fiber Chassis Components 2.5 mm Thick Main Chassis Battery mounting

More information

R R11 Eccentric Hub-Alu (4) R R11 Eccentric Hub-Alu (4) NOTICE. Pulley cover direction NOTICE BAG 01 NOTICE BAG 01

R R11 Eccentric Hub-Alu (4) R R11 Eccentric Hub-Alu (4) NOTICE. Pulley cover direction NOTICE BAG 01 NOTICE BAG 01 BAG BAG R Spool Axle Alu RA Front Spool Pulley Set 8T (4pcs) R Diff Gears (with Axle) Trim any excess flashing from the diff gear axle at the mold injection point. (pcs) (4pcs) R Spool Outdrive (pcs) R6

More information

ASSOCIATED 1:10 SCALE T3 MANUAL

ASSOCIATED 1:10 SCALE T3 MANUAL ASSOCIATED 0 SCALE T3 MANUAL INSTRUCTION MANUAL FOR THE RC10T3 ELECTRIC TRUCKS #7003, 7009, 7010, 7013, 7038, 7048 ASSOCIATED S RC10T3 TRUCK-- READER S CHOICE OF THE YEAR TIMES! Radio Control Car Action

More information

RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS

RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 SPORT 3.2 KIT. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ THE TEXT, LOOK AT THE PICTURES, AND THE EXPLODED VIEW

More information

INSTRUCTION MANUAL SUPPLEMENTARY SHEET

INSTRUCTION MANUAL SUPPLEMENTARY SHEET INSTRUCTION MANUAL SUPPLEMENTARY SHEET The T3R Raycer is based on the hugely-successful, race-winning T3 and as such the majority of spare parts and option parts are fully compatible between the two cars.

More information

#4016 KIT TOOLS SUPPLIED

#4016 KIT TOOLS SUPPLIED #4016 4 =? A F H L A, O = E? 5 J H K J BH JIKIFA IE.=?J HO6A= + = H > B E > A H > K A = K E K I? H A M + I F I E J A + D = I I E = @ > = A @ I 9 E @ A > = J J A H O I JI.=?J HO6A= > K A J E J = E K JK

More information

Calandra Racing Concepts

Calandra Racing Concepts Calandra Racing Concepts Carpet Knifeä Version 3 Assembly and Setup Manual Congratulations! You now own the best 1/12th scale car on the market today, the Carpet Knifeä Version 3. This completely new car

More information

TP02C. 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy. Dimensions. Length 410mm Width 250mm Height 150mm

TP02C. 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy. Dimensions. Length 410mm Width 250mm Height 150mm TP02C 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy Dimensions Length 410mm Width 250mm Height 150mm Transmitter Preparation Power Switch Antenna 27MHzTransmitter Crystal T 27MHz ON Extend

More information

COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT SUPPLEMENTARY MANUAL FOR LIGHTNING KIT

COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT SUPPLEMENTARY MANUAL FOR LIGHTNING KIT COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT SUPPLEMENTARY MANUAL FOR LIGHTNING 10 235 KIT E Thank you for purchasing VBC Racing product. Things that we should remind you. This

More information

General Building Tips: A Good Dealer Is Extremely Important!! 1 Additional Items Needed For Operation. Tools Supplied

General Building Tips: A Good Dealer Is Extremely Important!! 1 Additional Items Needed For Operation. Tools Supplied Owner s Manual Thank you for choosing the Team Magic E4JR. The E4JR includes a large selection of the important specialty parts when compared to the previous versions. Before you start building your new

More information

INSTRUCTION MANUAL INSTRUCTION MANUAL

INSTRUCTION MANUAL INSTRUCTION MANUAL INSTRUCTION MANUAL INSTRUCTION MANUAL Thank you for purchasing Pro-Line s PRO-Fusion SC 4 4! For Over 35 years, Pro-Line has designed and manufactured the best RC products in the world. This 1:10 scale

More information

Rustler (Model ) Parts List

Rustler (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler (Model 37054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B Associated Electrics, Inc. RS-1

ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B Associated Electrics, Inc. RS-1 ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B4 TT RS-1 2003-2006 Associated Electrics, Inc. FINAL ADJUSTMENTS RADIO ADJUSTMENTS Use the following

More information

MR-4BCS Parts List (Updated 9/15/03)

MR-4BCS Parts List (Updated 9/15/03) 4WD Offroad Kits MRBC-1S MR-4BCS Competition 4wd Buggy Kit $ 499.95 Chassis Parts ZS-001B Front Bumper 1 $ 3.75 ZS-002GB Graphite Main Chassis 1 $ 39.00 ZS-003UDS Upper Deck 1 $ 10.75 ZS-118 Battery Plate

More information

2030 OUTLAW SPRINTER HARDWARE I.D. BUTTON HD. CAP SCREW BAG H1 CHASSIS KIT BAG H3 HARDWARE BAG L2 REAR AXLE PARTS BAG L4 FRONT TIRES

2030 OUTLAW SPRINTER HARDWARE I.D. BUTTON HD. CAP SCREW BAG H1 CHASSIS KIT BAG H3 HARDWARE BAG L2 REAR AXLE PARTS BAG L4 FRONT TIRES THANKS FOR BUYING THE RJ SPEED OUTLAW SPRINTER KIT. IT IS COMPLETE LESS ELECTRICS, AND MADE FOR CARPET OR PAVEMENT RACING. IT REQUIRES A 540 OR 550 SIZE MOTOR, 4 OR 6 CELL BATTERY PACK, TWO CHANNEL RADIO

More information

SUSPENSION PARTS LOSB2002 F/R Suspension Arms (pr)(lst2)... $10.00 LOSB2102 Steering Bell Cranks, Shafts, & Chassis Braces (LST/2)... $7.00 LOSB2104 Front Spindles & Carriers (LST2)... $7.00 LOSB2106 Rear

More information

Rustler (Model ) Parts List

Rustler (Model ) Parts List Rustler (Model 37054-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

- 3 -

- 3 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - 1/8th Scale Electric 4WD GT Car MGT7 ECO Parts List E2103 FRONT

More information

RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS

RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 LTO SPORT KIT FOR OVAL RACING. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ THE TEXT, LOOK AT THE PICTURES, AND THE EXPLODED

More information

RJS WB ELECTRIC T/F DRAGSTER KIT LESS ELECTRICS

RJS WB ELECTRIC T/F DRAGSTER KIT LESS ELECTRICS RJS2006 30 WB ELECTRIC T/F DRAGSTER KIT LESS ELECTRICS THANKS FOR BUYING THIS RJ SPEED DRAGSTER KIT. IT IS MADE FOR STRAIGHT LINE DRAG RACING AND MAY BE BROKEN IF RUN INTO SOLID OBJECTS REPEATEDLY AT HIGH

More information

- 3 -

- 3 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - 1/8th Scale Electric 4WD GT Car MGT7 ECO Parts List E2103 FRONT

More information

:: CVA s

:: CVA s :: Shocks 507 5 75 39 333 33 335 33 337 33 339 3330 350 :: Springs 39 39 393 39 395 39 395 3953 395 39 Red O-Rings Shock Piston, PTFE Preload Spacers, Collars, Cups Shock Shaft all Cup VCS3 Shock Kit VCS3

More information

X-Maxx (Model ) Parts List

X-Maxx (Model ) Parts List X-Maxx (Model 77076-4) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

WARNING! Hard anodized, PTFE-coated shocks. Hard anodized, PTFE-coated MIP CVD's.

WARNING! Hard anodized, PTFE-coated shocks. Hard anodized, PTFE-coated MIP CVD's. 200 Thank you for purchasing this Team Associated product. This manual contains steps and instructions you will use to set up your gas truck. Please read this entire manual before attempting to start your

More information

ASSOCIATED 1:10 SCALE GT MANUAL

ASSOCIATED 1:10 SCALE GT MANUAL ASSOCIATED 0 SCALE GT MANUAL INSTRUCTION MANUAL FOR THE RC10GT GAS TRUCKS #7060, 7061, 7067, 7068, & 7090 ASSOCIATED S RC10GT-- 3 TIMES NORRCA WORLD CUP CHAMPION! 200 Thank you for purchasing this Team

More information

Slash: TQ 2.4GHz radio (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arrange

Slash: TQ 2.4GHz radio (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arrange Slash: TQ 2.4GHz radio (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings

More information

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01 NOTE : =Apply Thread lock adhesive R80059 One Way Cup R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 =Apply Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic Shims () R80005

More information

Shown with optional GFR-1017R Body Posts. J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN

Shown with optional GFR-1017R Body Posts. J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN Shown with optional GFR-1017R Body Posts J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034 www.hyperdriveracing.com 1 You now own a state of the art 1/10 scale oval race car. The

More information

1/10 Scale 4WD 200mm Gas Power Touring Car

1/10 Scale 4WD 200mm Gas Power Touring Car 1/10 Scale 4WD 200 Gas Power Touring Car STS PRO 10 Instruction Manual DIMENSIONS Length: 390 Width: 200 Height: 120 Weight (ready to run): About 1800g DRIVETRAIN Type: 3-belt 4WD Transmission: 2-speed

More information

Replacement Parts List Part Number Description Price

Replacement Parts List Part Number Description Price TM Replacement Parts List Part Number Description Price LOSA1022 Front Axles for XX-T Wheels (GTX, NXT, XXX-T)...$6.00 LOSA1113 Front Shock Tower (Desert Truck)...$5.99 LOSA1118 Front Suspension Arms (Desert

More information

Slash (Model 58024) Parts List

Slash (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash (Model 58024) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

OWNER'S MANUAL Magnolia Ave., Chino, CA phone: (909) fax: (909)

OWNER'S MANUAL Magnolia Ave., Chino, CA phone: (909) fax: (909) OWNER'S MANUAL Carefully read through all instructions to familiarize yourself with the parts, construction techniques, and tuning tips outlined in this manual. Being able to grasp the overall design of

More information

OWNER'S MANUAL 2000 & ROAR National Champion

OWNER'S MANUAL 2000 & ROAR National Champion 2000 & 2001 ROAR National Champion OWNER'S MANUAL Carefully read through all instructions to familiarize yourself with the parts, construction techniques, and tuning tips outlined in this manual. Being

More information

Revo with TRX 2.5R Parts List

Revo with TRX 2.5R Parts List Revo with TRX 2.5R Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Air Filters 5264 Air

More information

J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034

J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034 J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034 www.hyperdriveracing.com 1 You now own a state of the art 1/10 scale oval race car. The Hyperdrive Assault has gone through months

More information

Telluride 4X4 (Model ) Parts List

Telluride 4X4 (Model ) Parts List Telluride 4X4 (Model 67044-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings

More information

1:12 SCALE ON ROAD CAR KIT

1:12 SCALE ON ROAD CAR KIT 2 SCALE ON ROAD CAR KIT INSTRUCTION MANUAL OR KIT #4015 SAVE VE THIS MANUAL! Use with current catalog for future, hassle-free re-ordering of parts. 1998 Associated Electrics, Inc. - 9? D = I I EI @ A I

More information

Slash (Model ) Parts List

Slash (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash (Model 58034-2) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

Rustler (Model ) Parts List

Rustler (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler (Model 37054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

ASSEMBLY OF THE FRONT AND REAR BALL DIFF. Builds two differentials for front and rear

ASSEMBLY OF THE FRONT AND REAR BALL DIFF. Builds two differentials for front and rear 1 ASSEMBLY OF THE FRONT AND REAR BALL DIFF. 37145 40060 40060 2.6mm Nylon Nut 37110 35958 37132 2.6x6x1mm Washer 37148 Apply Grease 37120 (12 Pcs) Builds two differentials for front and rear. 38288 35958

More information

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01. R Front One Way Cup (2) R Front One Way

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01. R Front One Way Cup (2) R Front One Way NOTE : =Apply Thread lock adhesive R80059 One Way Cup () R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 =Apply Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic Shims ()

More information

Use this NT Supplementary Instruction Sheet along with the standard NT1 Instruction Manual included in the kit.

Use this NT Supplementary Instruction Sheet along with the standard NT1 Instruction Manual included in the kit. INSTRUCTION MANUAL SUPPLEMENTARY SHEET Use this NT1 2013 Supplementary Instruction Sheet along with the standard NT1 Instruction Manual included in the kit. New and Improved Parts All of these parts are

More information

FIRST, A WORD ABOUT THE NEW RC12LC

FIRST, A WORD ABOUT THE NEW RC12LC FIRST, A WORD ABOUT THE NEW RC12LC CONGRATULATIONS!! You have purchased the production version of the car that Masami Hirosaka used to win the 1996/97 IFMAR 1/12 scale On Road World Championships. This

More information

Slayer Pro 4X4 (Model ) Parts List

Slayer Pro 4X4 (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slayer Pro 4X4 (Model 59076-3) Parts List Air Filters 5262 Air filter and pre-filter

More information

Monster Jam Replica (Model 36044) Parts List

Monster Jam Replica (Model 36044) Parts List Monster Jam Replica (Model 36044) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings

More information

Revo 3.3 Parts List. pitch)...$ Clutch bell (16-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-

Revo 3.3 Parts List. pitch)...$ Clutch bell (16-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e- Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Revo 3.3 Parts List Air Filters 5264 Air filter housing/

More information

Caution. Electronic Speed Controller Instructions. Needle Nose Pliers Awl RCE3003 HD Grease. Fusion Tire Glue. RCE3004 Super Diff Lube

Caution. Electronic Speed Controller Instructions. Needle Nose Pliers Awl RCE3003 HD Grease. Fusion Tire Glue. RCE3004 Super Diff Lube Caution Please read the following manual closely and familiarize yourself with its contents before operating the model. Keep the manual in a safe place for future reference for repairs, part numbers and

More information

Chassis Assembly x12WST. 3018X XL-5 Electronic Speed Control x10CS x8WST x12RST x10CS.

Chassis Assembly x12WST. 3018X XL-5 Electronic Speed Control x10CS x8WST x12RST x10CS. 3286 3x12WST Chassis Assembly 3229 2.5x10CS 3628 1926 3290 3x8WST 3018X XL-5 Electronic Speed Control 3628 3629 2587 3x10CS 1834 3290 3x8WST 2676 3x12RST 2587 3x10CS 3627X 1834 3626 3628 3629 3627X 1726

More information

Monster Jam Replica (Model 3602) Parts List

Monster Jam Replica (Model 3602) Parts List Monster Jam Replica (Model 3602) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings

More information

BIND ST-TRIM TH-TRIM ST-D/R

BIND ST-TRIM TH-TRIM ST-D/R 4 4 4 4 BIND ST-TRIM TH-TRIM ST-D/R 1. Put the battery in the car. 2. Install the battery. 3. Turn on the transmitter. Connect firmly. 4. Turn on the electronic speed controller. ON OFF AX80084 UV Joint

More information

Slash (Model 58024) Parts List

Slash (Model 58024) Parts List Slash (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

Chassis Assembly 1926 1834 3290 3x8WST 3286 3x12WST 3018X XL-5 Electronic Speed Control 3290 3x8WST 2676 3x12RST 3229 2.5x10CS 2587 3x10CS 3629 3628 2587 3x10CS 3628 3628 3727A 3638 1726 3727A 3625 3629

More information

XRAY KITS M18 M18T M18MT PARTS NT18 NT18T NT18MT PARTS. o = option part x = standard included / fits

XRAY KITS M18 M18T M18MT PARTS NT18 NT18T NT18MT PARTS. o = option part x = standard included / fits PRO LiPo PRO USE THE DROP MENU TO FILTER THE SELECTION XRAY KITS o = option part x = standard included / fits 38 0000 XRAY - 4WD SHAFT DRIVE 1/18 MICRO CAR 38 0003 XRAY PRO LiPo - 4WD SHAFT DRIVE 1/18

More information

Install steering rack assembly to chassis using x 3/8 stainless flat head socket screws and 2-6.4mm x 1.1mm blue aluminum spacers as shown.

Install steering rack assembly to chassis using x 3/8 stainless flat head socket screws and 2-6.4mm x 1.1mm blue aluminum spacers as shown. Install steering rack assembly to chassis using 2-4-40 x 3/8 stainless flat head socket screws and 2-6.4mm x 1.1mm blue aluminum spacers as Qty 2, 4-40 x 3/8 fhcs Qty 2, 6.4mm x 1.1mm blue aluminum spacer

More information

Replacement Parts List Part Number Description Price

Replacement Parts List Part Number Description Price Replacement Parts List Part Number Description Price 48 Pitch Pinion Gear, 12T...$4.99 LOSA4006 Antenna Tube and Set Screw...$1.50 LOSA4015 Battery Foam...$2.50 LOSA5224 Silicone Shock Oil, 30 wt, 2 oz...$3.99

More information

Slash (Model 5805) Parts List

Slash (Model 5805) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Slash (Model 5805) Parts List Bearings & Bushings

More information

Sportwerks Raven RTR Assembly and Operation Manual

Sportwerks Raven RTR Assembly and Operation Manual Sportwerks Raven RTR Assembly and Operation Manual Specifications: Scale.............. 1/10 Length............. 16 in (406mm) Front Track.......... 12.75 in (324mm) Rear Track.......... 12.5 in (318mm)

More information

part # description qty price part # description qty price LRP surpasses every other type available.

part # description qty price part # description qty price LRP surpasses every other type available. 1:10 RC10L2 ON ROAD CATALOG CATALOG #10L2 October 1997 This free catalog is updated yearly; is yours current? Prices subject to change without notice. If you cannot obtain parts from your distributor or

More information

Pinion Gear and Setscrew

Pinion Gear and Setscrew XRAY T1 Factory Kit 2005 The new XRAY T1 Factory Kit '05 (T1FK'05) is the 5th generation of XRAY's extremely successful T1 family of 1/10-scale on -road electric touring cars. The T1FK'05 is a large evolutionary

More information

E-Revo (Model 5603) Parts List

E-Revo (Model 5603) Parts List E-Revo (Model 5603) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

Additional equipment and parts needed: Tools needed: Disclaimer: Warnings: Warranty:

Additional equipment and parts needed: Tools needed: Disclaimer: Warnings: Warranty: Introduction Thank you for purchasing the Tekno RC SCT410 1/10th Scale Electric 4WD Competition Short Course Truck. The SCT410 represents the state-of-the-art in 1/10th Electric Short Course technology.

More information

INSTRUCTION MANUAL AX90053-I001

INSTRUCTION MANUAL AX90053-I001 INSTRUCTION MANUAL AX90053-I001 2 3 AX80018 Hardware Parts Tree AX80006 Servo Set x3 AX31301 10mm Shock Caps Parts Tree (Blue) AX80069 AX31300 10mm Shock Parts Tree 2 (Blue) AX31114 WB8 Driveshaft AX80033

More information

2103 NITRO RAIL DRAGSTER KIT

2103 NITRO RAIL DRAGSTER KIT 203 NITRO RAIL DRAGSTER KIT THANKS FOR BUYING RJ SPEED S NITRO DRAG KIT. IT IS A LITEWEIGHT CAR MADE FOR STRAIGHT LINE DRAG RACING AND CAN BE BROKEN IF RUN INTO SOLID OBJECTS AT HIGH SPEED. YOU WILL NEED

More information

TRX-4 Sport (Model ) Parts List

TRX-4 Sport (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. TRX-4 Sport (Model 82024-4) Parts List Axle Components 8241 Axle housing, front 8242

More information

E-Revo (Model ) Parts List

E-Revo (Model ) Parts List E-Revo (Model 56036-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information